Memorex Clock Radio MSP CR1100 User Manual

CR1100.O/M.QXD 4/16/02 3:51 PM Page 14  
SPHERE TIMEBALL  
(CLOCK RADIO WITH ALARM)  
MODEL: MSP-CR1100  
BEFORE OPERATING THIS PRODUCT, PLEASE READ THESE  
INSTRUCTIONS COMPLETELY.  
OPERATING INSTRUCTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CR1100.O/M.QXD 4/16/02 3:51 PM Page 2  
INFORMATION:  
This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential installa-  
tion. This equipment generates, uses, and can radiate radio frequency energy and,  
if not installed and used in accordance with instructions, may cause harmful interfer-  
ence to radio communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful interfer-  
ence to radio or television reception, which can be determined by turning the equip-  
ment off and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
IMPORTANT SAFETY INSTRUCTIONS  
Before using the unit, be sure to read all operating  
instructions carefully. Please note that these are  
general precautions and may not pertain to your  
unit. For example, this unit may not have the  
capability to be connected to an outdoor antenna.  
1. READ INSTRUCTIONS  
All the safety and operating instructions should be  
read before the product is operated.  
2. RETAIN INSTRUCTIONS  
Do not place this product on an unstable cart,  
stand, tripod, bracket, or table. The product may  
fall, causing serious injury and serious damage to  
the product. Use only with a cart, stand, tripod,  
bracket, or table recommended by the  
manufacturer or sold with the product. Any  
mounting of the product should follow the  
manufacturer’s instructions, and should use a  
mounting accessory recommended by the  
manufacturer.  
The safety and operating instructions should be  
retained for future reference.  
3. HEED WARNINGS  
8A. An appliance and cart combination  
PORTABLE CART WARNING  
(symbol provided by RETAC)  
should be moved with care. Quick  
All warnings on the product and in the operating  
instructions should be adhered to.  
4. FOLLOW INSTRUCTIONS  
stops, excessive force, and uneven  
surfaces may cause the appliance  
and cart combination to overturn.  
All operating and use instructions should be  
followed.  
5. CLEANING  
Unplug this product from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol  
cleaners. Use a damp cloth for cleaning.  
6. ATTACHMENTS  
9. VENTILATION  
Slots and openings in the cabinet and in the back  
or bottom are provided for ventilation and to  
ensure reliable operation of the product and to  
protect it from overheating. These openings must  
not be blocked or covered. The openings should  
never be blocked by placing the product on a  
bed, sofa, rug, or other similar surface. This  
product should never be placed near or over a  
radiator or heat source. This product should not  
be placed in a built-in installation such as a  
bookcase or rack unless proper ventilation is  
provided or the manufacturer's instructions have  
been adhered to.  
Do not use attachments not recommended by the  
product's manufacturer as they may cause  
hazards.  
7. WATER AND MOISTURE  
Do not use this product near water- for example,  
near a bathtub, washbowl, kitchen sink, or  
laundry tub, in a wet basement, or near a  
swimming pool.  
10. POWER SOURCES  
8. ACCESSORIES  
This product should be operated only from the  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
CR1100.O/M.QXD 4/16/02 3:51 PM Page 3  
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)  
type of power source indicated on the marking  
label. If you are not sure of the type of power  
supply to your home, consult your appliance  
dealer or local power company. For products  
intended to operate from battery power, or other  
sources, refer to the operating instructions.  
11. GROUNDING OR POLARIZATION  
This product is equipped with a polarized  
alternating-current line plug (a plug having one  
blade wider than the other). This plug will fit into  
the power outlet only one way. This is a safety  
feature. If you are unable to insert the plug fully  
into the outlet, try reversing the plug. If the plug  
should still fail to fit, contact your electrician to  
replace your obsolete outlet. Do not defeat the  
safety purpose of the polarized plug.  
When replacement parts are required, be sure  
the service technician uses replacement parts  
specified by the manufacturer or those that have  
the same characteristics as the original part.  
Unauthorized substitutions may result in fire,  
electric shock or other hazards.  
19. SAFETY CHECK  
Upon completion of any service or repairs to this  
product, ask the service technician to perform  
safety checks to determine that the product is in  
proper operating condition.  
20. WALL OR CEILING MOUNTING  
The product should be mounted to a wall or  
ceiling only as recommended by the  
manufacturer.  
21. DAMAGE REQUIRING SERVICE  
Unplug the product from the wall outlet and refer  
servicing to qualified service personnel under the  
following conditions:  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen  
into the product.  
c. If the product has been exposed to rain or water.  
d. If the product does not operate normally by  
following the operating instructions. Adjust only  
those controls that are covered by the operating  
instructions, as an adjustment of other controls  
may result in damage and will often require  
extensive work by a qualified technician to restore  
the product to its normal operation.  
12. POWER-CORD PROTECTION  
Power-supply cords should be routed so that they  
are not likely to be walked on or pinched by items  
placed upon or against them, paying particular  
attention to cords at plugs, convenience  
receptacles, and the point where they exit from  
the appliance.  
13. LIGHTNING  
To protect your product from a lightning storm, or  
when it is left unattended and unused for long  
periods of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This will  
prevent damage to the product due to lightning  
and power-line surges.  
14. POWER LINES  
e. If the product has been dropped or the cabinet  
has been damaged.  
f. When the product exhibits a distinct change in  
performance - this indicates a need for service.  
22. HEAT  
An outside antenna system should not be located  
in the vicinity of overhead power lines or other  
electric light or power circuits, or where it can fall  
into such power lines or circuits. When installing  
an outside antenna system, extreme care should  
be taken to keep from touching such power lines  
or circuits as contact with them might be fatal.  
15. OVERLOADING  
The product should be situated away from heat  
sources such as radiators, heat registers, stoves,  
or other products (including amplifiers) that  
produce heat.  
Do not overload wall outlets and extension cords  
as this can result in a risk of fire or electric shock.  
16. OBJECT AND LIQUID ENTRY  
23. NOTE TO CATV SYSTEM INSTALLER  
This reminder is provided to call the CATV  
system installer's attention to Article 820-40 of the  
NEC that provides guidelines for proper  
grounding and, in particular, specifies that the  
cable ground shall be connected to the grounding  
system of the building, as close to the point of  
cable entry as practical.  
Never push objects of any kind into this product  
through openings as they may touch dangerous  
voltage points or short out parts that could result in  
fire or electric shock. Never spill or spray any type  
of liquid on the product.  
17. SERVICING  
24. NONUSE PERIODS  
Do not attempt to service this product yourself as  
opening or removing covers may expose you to  
dangerous voltage or other hazards. Refer all  
servicing to qualified service personnel.  
18. REPLACEMENT PARTS  
The power cord of the appliance should be  
unplugged from the outlet when left unused for a  
long period of time.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CR1100.O/M.QXD 4/16/02 3:51 PM Page 4  
Dear Customer:  
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your  
musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement  
your equipment offers. This manufacturer and the Electronic Industries Association’s  
Consumer Electronics Group want you to get the most out of your equipment by playing it at a  
safe level. One that lets the sound come through loud and clear without annoying blaring or  
distortion and, most importantly, without affecting your sensitive hearing.  
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of  
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard  
against this by setting your equipment at a safe level BEFORE your hearing adapts.  
To establish a safe level:  
Start your volume control at a low setting.  
Slowly increase the sound until you can hear it comfortably and clearly, and without  
distortion.  
Once you have established a comfortable sound level:  
Set the dial and leave it there.  
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After  
all, we want you listening for a lifetime.  
We Want You Listening For A Lifetime  
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since  
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and  
the Electronic Industries Association’s Consumer Electronics Group recommend you avoid  
prolonged exposure to excessive noise. This list of sound levels is included for your protection.  
Decibel  
Level  
30  
Example  
Quiet library, soft whispers  
40  
50  
60  
70  
Living room, refrigerator, bedroom away from traffic  
Light traffic, normal conversation, quiet office  
Air conditioner at 20 feet, sewing machine  
Vacuum cleaner, hair dryer, noisy restaurant  
Average city traffic, garbage disposals, alarm clock at two feet  
80  
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:  
90  
Subway, motorcycle, truck traffic, lawn mower  
Garbage truck, chain saw, pneumatic drill  
Rock band concert in front of speakers, thunderclap  
Gunshot blast, jet engine  
100  
120  
140  
180  
Rocket launching pad  
Information courtesy of the Deafness Research Foundation.  
We  
WantYou  
LISTENING  
ForALifetime  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
CR1100.O/M.QXD 4/16/02 3:51 PM Page 5  
LOCATION OF CONTROLS  
FRONT  
BOTTOM  
1
2
6
7
8
9
3
4
5
10  
11  
12  
13  
14  
15  
16  
17  
1. SLEEP Button (Top of Unit)  
2. Snooze (ZZZ) Button (Top of Unit)  
3. Display  
4. ALARM Indicator  
5. PM Indicator  
6. TUNING Control  
7. VOLUME Control  
8. AM/FM Dial Scale and Pointer  
9. AM/FM Switch  
10. ON/OFF/AUTO/BUZZ Switch  
11. ALARM SET/AL. OFF Button  
12. TIME SET Button  
13. HOUR Button  
14. MIN Button  
15. Battery Compartment (Back of Unit)  
16. FM Antenna Wire (Back of Unit)  
17. AC Cord (Back of Unit)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
CR1100.O/M.QXD 4/16/02 3:51 PM Page 6  
INSTALLATION  
Unravel the AC cord and connect it to a  
conveniently located AC outlet having 120V  
and 60Hz only. The Clock Display will  
illuminate and “12:00” will blink in the window.  
NOTE: If the AC plug does not fit into a  
nonpolarized outlet, do not file or cut the wide  
blade. If the AC plug does not t into a  
nonpolarized AC outlet, do not le or cut the  
wide blade. It is the user’s responsibility to  
have an electrician replace the obsolete outlet.  
If the AC cord is disconnected or if there is a power failure, this electronic clock is  
designed to continue operating internally (without showing the time on the Clock  
Display) with a 9 volt battery (not included). To install the battery, connect the  
battery to the terminals of the battery snap inside the compartment (use of an  
alkaline battery is recommended).  
Be sure to check the condition of the battery  
periodically by disconnecting the AC cord and  
connecting it again two or three minutes later. The  
preset times should continue operating. If the present  
time does not appear, it indicates the battery is dead  
or not connected properly. The 9 volt battery will keep  
the internal times accurately for approximately 30  
minutes. If the power is restored after 30 minutes, the  
times may need to be reset.  
BATTERY PRECAUTIONS  
Follow these precautions when using batteries in this device:  
1. Use only the size and type of battery specified.  
2. Be sure to follow the correct polarity when installing the batteries as indicated in the  
battery compartment. Reversed batteries may cause damage to the device.  
3. If the device is not to be used for a long period of time, remove the batteries to prevent  
damage or injury from possible battery leakage.  
4. Do not try to recharge batteries not intended to be recharged; they can overheat and  
rupture. (Follow battery manufacturer’s directions.)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
CR1100.O/M.QXD 4/16/02 3:51 PM Page 7  
OPERATION  
TO LISTEN TO THE RADIO  
1
2
2
2
1
1
Slide the ON/OFF/AUTO/BUZZ switch  
to the ON position to turn the unit  
on. Slide the AM/FM switch to the  
AM or FM position.  
Tune a station by turning the TUNING  
control . Adjust the VOLUME control  
as desired.  
Antennas  
FM: Extend the FM antenna wire for best reception.  
AM: Turn the unit for better AM reception.  
TO SET OR RESET THE ACTUAL TIME  
1
2
3
1
Press and hold the TIME SET button.  
While holding the TIME SET button ,  
press the HOUR button to set the  
present hour and the MIN button to  
set the present minute. Make sure the  
PM indicator is lit if you are setting to  
PM, and make sure it is not lit if setting  
to AM.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
CR1100.O/M.QXD 4/16/02 3:51 PM Page 8  
OPERATION (CONTINUED)  
TO SET OR RESET THE ALARM TIME  
2
1
1
3
While holding the ALARM SET/AL.  
OFF button , press the HOUR button  
to set the desired alarm hour and the  
MIN button to set the desired alarm  
minute.  
Press and hold the ALARM SET/AL.  
OFF button.  
TO SET THE ALARM TO WAKE TO RADIO  
1
2
2
1
Set the alarm time as previously Slide the ON/OFF/AUTO/BUZZ switch  
instructed. Slide the AM/FM switch to the AUTO position. When the actual  
time matches the selected preset  
alarm time, the unit automatically turns  
on.  
To shut off the alarm, see TO SHUT  
THE ALARM OFF section on the next  
page.  
to the AM or FM position, select a  
radio station as described on page 7  
and make sure the VOLUME is set  
as desired.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
CR1100.O/M.QXD 4/16/02 3:51 PM Page 9  
OPERATION (CONTINUED)  
TO SET THE ALARM TO WAKE TO BUZZER  
1
Set the alarm time as previously  
instructed. Slide the ON/OFF/AUTO/  
BUZZ switch to the BUZZ position.  
When the actual time matches the  
selected preset alarm time, the unit  
automatically turns on. To shut off the  
alarm, see TO SHUT THE ALARM  
OFF section below.  
TO SHUT THE ALARM OFF  
To shut the alarm off, press the  
1
ALARM SET/AL. OFF button once  
and the alarm time will be reset for  
the next day. Slide the ON/OFF/  
AUTO/BUZZ switch to the OFF  
position to turn off the alarm and not  
set it for the next day.  
2
1
SNOOZE  
The alarm can be temporarily turned  
off manually by pressing the ZZZ  
(Snooze) button; the alarm will turn  
back on automatically nine minutes  
later.  
1
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
CR1100.O/M.QXD 4/16/02 3:51 PM Page 10  
OPERATION (CONTINUED)  
TO ACTIVATE THE SLEEP FUNCTION  
1
2
Tune the desired radio station as Press the SLEEP button and “59” will  
previously instructed. Slide the appear on the clock display, then  
ON/OFF/AUTO/BUZZ switch to the release the button. The unit will turn on  
OFF OR AUTO position.  
for 59 minutes and then turn off.  
3
4
1
1
3
2
2
To adjust the sleep time, press and  
hold the SLEEP button , and then  
press the HOUR button to increase  
the hour by one, or the MINUTE  
button to decrease the minutes by  
one. Maximum sleep time is 1 hour  
and 59 minutes.  
To cancel sleep time, press and hold  
the SLEEP button and repeatedly  
press the MINUTE button until the  
sleep time is 0.  
NOTE: You can also cancel the sleep  
time by pressing the ZZZ (Snooze)  
button.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CR1100.O/M.QXD 4/16/02 3:51 PM Page 11  
TROUBLESHOOTING GUIDE  
If you experience a problem with this unit, check the chart below before  
calling for service.  
POSSIBLE  
CAUSE  
POSSIBLE  
SOLUTION  
SYMPTOM  
GENERAL  
Power does  
not come on.  
RADIO  
AC line cord not  
plugged in.  
Insert plug firmly  
into AC outlet.  
No sound.  
ON/OFF/AUTO/BUZZ Set switch to the  
switch not set to ON.  
VOLUME control at  
minimum position.  
to ON position.  
Increase the VOLUME.  
Noise or sound  
distorted on AM  
or FM.  
AM - Interference from Turn the radio for  
traffic.  
better AM reception.  
Extend Antenna Wire.  
FM - Antenna Wire  
not extended.  
CLOCK  
Flashing time.  
Battery connected  
improperly, not con-  
nected or dead.  
Clock not set.  
Check the battery.  
Set the clock.  
Alarm does not  
turn on.  
ON/OFF/AUTO/BUZZ Set switch to the  
switch not in AUTO or AUTO or BUZZ  
BUZZ position.  
position.  
Clock is not set.  
Alarm time not set.  
Set the clock.  
Set alarm time.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CR1100.O/M.QXD 4/16/02 3:51 PM Page 12  
SPECIFICATIONS  
AUDIO  
Frequency Range (AM) ..................................................530–1710KHz  
Frequency Range (FM)......................................................88–108MHz  
GENERAL  
Power Supply.....................................AC 120V, 60Hz (9V for back-up)  
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE  
VISIT OUR WEBSITE AT:  
WWW.MEMCORPINC.COM  
OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.  
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90  
DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR  
PLACE OF PURCHASE OR MEMOREX.  
FOR PARTS AND ACCESSORIES, CONTACT FOX INT’L AT  
1-800-321-6993.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CR1100.O/M.QXD 4/16/02 3:51 PM Page 13  
Memcorp, Inc.  
Weston, FL  
Printed in Hong Kong  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Kyocera Fax Machine FS 3640MFP User Manual
Laser Computer Accessories SPK S20 User Manual
Lenovo Home Theater System E74 User Manual
LG Electronics Computer Monitor E2290V User Manual
LG Electronics Refrigerator LMXS30746S User Manual
Lincoln Electric Welder CV 655 User Manual
Logitech Tablet Accessory MK605 User Manual
LST Smoke Alarm 2351E User Manual
Magnavox Home Theater System MRD723B F7 User Manual
Makita Nail Gun AG125 User Manual