Owner’s
Manual
MC58 Eight Channel Power Amplifier
MC58
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank You
A polarized plug has two blades with one wider
than the other. A grounding type plug has two
blades and a third grounding prong. The wide
blade or the third prong are provided for your
safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the
obsolete outlet.
Your decision to own this McIntosh MC58 Eight Channel
Power Amplifier ranks you at the very top among discrimi-
nating music listeners. You now have “The Best.” The
McIntosh dedication to “Quality,” is assurance that you
will receive many years of musical enjoyment from this
unit.
Please take a short time to read the information in this
manual. We want you to be as familiar as possible with all
the features and functions of your new McIntosh.
18. Do not overload wall outlets, extension cords or inte-
gral convenience receptacles as this can result in a risk
of fire or electric shock.
19. To completely disconnect this equipment from the AC
Mains, disconnect the power supply cord plug from the
AC receptacle.
Please Take A Moment
The serial number, purchase date and McIntosh dealer
name are important to you for possible insurance claim or
future service. The spaces below have been provided for
you to record that information:
Care of Equipment:
20. Clean only with a dry cloth.
21. Do not permit objects or liquids of any kind to be
pushed, spilled and/or fall into the equipment through
enclosure openings.
22. Unplug the power cord from the AC power outlet
when left unused for a long period of time.
Serial Number:
Purchase Date:
Dealer Name:
Technical Assistance
Repair of Equipment:
If at any time you have questions about your McIntosh
product, contact your McIntosh dealer who is familiar with
your McIntosh equipment and any other brands that may
be part of your system. If you or your dealer wish addi-
tional help concerning a suspected problem, you can re-
ceive technical assistance for all McIntosh products at:
23. Refer all servicing to qualified service personnel. Ser-
vicing is required when the equipment has been dam-
aged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the equipment, the equipment has been exposed to
rain or moisture, does not operate normally, or has
been dropped.
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-1545
Fax: 607-723-3636
24. Do not attempt to service beyond that described in the
operating instructions. All other service should be re-
ferred to qualified service personnel.
25. When replacement parts are required, be sure the ser-
vice technician has used replacement parts specified by
McIntosh or have the same characteristics as the origi-
nal part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
26. Upon completion of any service or repairs to this prod-
uct, ask the service technician to perform safety checks
to determine that the product is in proper operating
condition.
Customer Service
If it is determined that your McIntosh product is in need of
repair, you can return it to your dealer. You can also return
it to the McIntosh Laboratory Service Repair department.
For assistance on factory repair return procedure, contact
the McIntosh Repair Department at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917
Copyright 2000 by McIntosh Laboratory, Inc.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Connector Information
Thank You.......................................................................... 2 Multi-Room Din Connector Pin Layout
Safety Instructions ............................................................. 2 1. Zone 3-Pwr. Ctrl.
Thank You and Please Take a Moment.............................. 3 2. Zone 1-Pwr. Ctrl.
Technical Assistance and Customer Service ..................... 3 3. Pwr. Ctrl. (Main)
Table of Contents and General Notes ................................ 4 4. Zone 2-Pwr. Ctrl.
Connector Information ...................................................... 4 5. Video Power
Introduction ....................................................................... 5 6. Zone 4-Pwr. Ctrl.
Performance Features ........................................................ 5 7. Gnd.
Dimensions ........................................................................ 6
Installation ......................................................................... 7 8 Channel In DB25 Connector Pin Layout
Rear Panel Controls, Connections and Switch .................. 8
How to Connect with a CR16............................................ 9
How to Connect two MC58s in Bridge Mode ................. 10
How to Connect in a Home Theater System ................... 11
Front Panel Displays and Controls .................................. 12
How to Operate................................................................ 13
Specifications .................................................................. 14
Packing Instruction .......................................................... 15
1. Zone 2-Left
2. Zone 1-Left
3. Zone 2-Right
4. Zone 3-Left
5. Zone 1-Right
6. Zone 3-Right
7. Zone 4-Left
8. Zone 4-Right
9. N/C
14. Zone 2-Left Gnd.
15. Zone 1-Left Gnd.
16. Zone 2-Right Gnd.
17. Zone 3-Left Gnd.
18. Zone 1-Right Gnd.
19.Zone 3-Right Gnd.
20. Zone 4-Left Gnd.
21. Zone 4-Right Gnd.
22. N/C
10. N/C
23. Zone 3-Pwr. Ctrl.
24. Zone 4-Pwr. Ctrl.
25. Pwr. Ctrl. Gnd. (Main)
General Notes
11. Zone 1-Pwr. Ctrl.
12. Zone 2-Pwr. Ctrl.
13. Pwr. Ctrl. (Main)
1. Connecting Cables and Connectors are available from the
McIntosh Parts Department:
Data and Power Control Cable Part No. 170-202
Six foot, shielded 2 conductor, with 1/8 inch stereo mini
phone plugs on each end.
8 CHANNEL IN
Control Center to Multichannel Power Amplifier Cable
Part No. 170-631
Six foot, DB25, shielded, straight through, 25 conductor
male-to-female cable.
Multizone Control System to Multichannel Power
Amplifier Cable Part No. 170-147
Six foot, 7Pin DIN, shielded, male-to-male cable.
2. For additional connection information, refer to the owner’s
manual(s) for any component(s) connected to the MC58
Amplifier.
3. There is a built-in turn on delay which will mute the speaker
outputs for approximately two seconds when the amplifier is
turned on.
4. It is very important that loudspeaker cables of adequate size
be used in your music system, to ensure that there will be no
power loss or heating. Cable size is specified in Gauge
numbers or AWG, (American Wire Gauge). The smaller the
Gauge number, the larger the wire size:
If your loudspeaker cables are 25 feet (7.62m) or less,
use at least 18 Gauge (AWG) wire size or larger.
If your loudspeaker cables are 50 feet (38.1m) or less,
use at least 16 Gauge (AWG) wire size or larger.
If your loudspeaker cables are 100 feet (76.2m) or less,
use at least 14 Gauge (AWG) wire size or larger.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction and Performance Features
Introduction
Eight 50 watt McIntosh amplifier channels in one conve-
nient package make the MC58 an ideal amplifier for a
multizone system. The MC58 can be configured in differ-
ent Operating Modes to fit a wide range of uses where a
multichannel amplifier is required. For example, it has the
ability to bridge a pair of channels for 100 watts output.
• Individual Channel or Bridged Pair Configuration
Each pair of MC58 amplifier channels can be operated
separately at 50 watts each, or bridged for 100 watts. The
MC58 is ideal for any application requiring a multichannel
power amplifier, such as a mulitzone system or home the-
ater system.
• Front Panel
Performance Features
The classic McIntosh Illuminated glass front panel includes
eight individual channel power guard indicators, four chan-
nel pair status indicators and a Power On/Off switch.
• Power Output
The MC58 consists of eight separate power amplifier chan-
nels, each capable of 50 watts into 4 ohm speakers with
less than 0.005% distortion. This is 400 watts of McIntosh
power in a single package.
• Power Guard
All eight channels include the patented McIntosh Power
Guard Circuit, that prevents the amplifier from being
overdriven into clipping with its harsh distorted sound that
can also damage your valuable loudspeakers.
• Sentry Monitor
McIntosh Sentry Monitor power output stage protection
circuits are present on all eight channels to ensure the
MC58 will have a long and trouble free operating life.
• Thermal Protection
Built-in thermal protection circuits guard against overheat-
ing which could shorten the normal long life expectancy of
your McIntosh power amplifier.
• Direct Current Protection
Direct Current sensing circuits on each channel provide
extra protection for your valuable loudspeakers.
• Convenient Single Cable Hookup
A rear panel connector provides for the convenience of us-
ing a single cable, (DB25 computer style) to receive all au-
dio and power control signals from a McIntosh Multizone
Control System.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MC58 Dimensions
The following dimensions can assist in determining the
best location for your MC58. There is additional informa-
tion on the next page pertaining to installing the MC58 into
cabinets.
17-1/2"
44.45cm
Front View of the MC58
7 -5/8"
19.37cm
7 -1/8"
18.10cm
17"
43.18cm
6 -5/16"
16.03cm
Rear View of the MC58
13 -1/4"
33.66cm
18-1/2"
46.99cm
17"
43.18cm
Side View of the MC58
6-1/2"
16.51cm
3/16"
0.48cm
13/16"
2.06cm
14-1/16"
35.72cm
7/8"
2.22cm
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions and Installation
Installation
The MC58 can be placed upright on a table or shelf, stand-
ing on its four 1 inch high feet. The four feet may be re-
moved from the bottom of the MC58 when it is custom in-
stalled as outlined below. The four feet together with the
mounting screws should be retained for possible future use
if the MC58 is removed from the custom installation and
used free standing. It also can be custom installed in a
piece of furniture
least 6 inches (15.24 cm) above the top, 2 inches
(3.81cm) below the bottom and 1 inch (2.54 cm) on each
side of the power amplifier, so that airflow is not ob-
structed. Allow 20 inches (50.8 cm) depth behind the
front panel. Be sure to cut out a ventilation hole in the
mounting shelf according to the dimensions in the draw-
ing.
or cabinet of your
choice. The re-
quired panel cut-
out, ventilation cut-
out and unit dimen-
sions are shown.
Always provide
adequate ventila-
tion for your
MC58. Cool opera-
tion ensures the
longest possible
operating life for
any electronic in-
strument. Do not
install the MC58
directly above a
heat generating
component such as
a high powered
amplifier. If all the
components are
installed in a single
cabinet, a quiet
running ventilation
fan can be a defi-
nite asset in main-
taining all the sys-
tem components at
the coolest possible
operating tempera-
ture.
A custom cabi-
net installation
should provide the
following mini-
mum spacing di-
mensions for cool
operation. Allow at
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MC58 Rear Panel Controls, Connections and Switch
POWER CONTROL IN receives
turn on/off signals from a McIntosh
component and the POWER CON-
TROL OUT sends that turn on/off
signal to the next McIntosh compo-
nent
IN for discrete audio cables
from a Multizone Control or
Home Theater System and
OUT sends the input signal to
another component
Selects power
turn-on mode
8 CHANNEL IN accepts a 25 con-
ductor DB25 computer type cable
that connects all audio and power
control signals
Individual Input
Level controls
Connect the MC58
power cord to a live
AC outlet. Refer to
information on the
back panel to deter-
mine the correct volt-
age
Receives zone
turn-on control
signals from a
McIntosh
Channel pair
Mode switch
Multizone system
Main Fuse holder, refer
to information on the
back panel of your
MC58 to determine the
correct fuse size and rat-
ing
OUPUT Connections for
8 or 4 ohm loudspeakers
8
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Connect with a CR16
How to Connect with a CR16
1. Connect the loudspeaker cables to the appropriate chan-
nel output connectors, being careful to observe the cor-
rect polarities.
2. Connect a single DB25 computer type cable from the
Multichannel Output of a Mutlizone Control System to
the MC58 8 CHANNEL INput connector for all eight
audio channels and power control.
McIntosh CR16 Multizone Control System
Note: Both audio and zone power control pass through this
cable. Discrete zone audio cables may also be used,
additionally connect a cable from the CR16 Din
Multichannel Amp connector to the matching
connector on the amplifier to provide Zone Power
Control.
3. Connect the MC58 power cord to a live AC outlet.
jfbattmr80
To AC Outlet
Zone Four
Zone Three
Zone Two
Zone One
Left
Loudspeaker
Right
Loudspeaker
Left
Loudspeaker
Right
Loudspeaker
Left
Loudspeaker
Right
Loudspeaker
Left
Loudspeaker
Right
Loudspeaker
9
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Connect two MC58s in Bridge Mode
How to Connect two MC58s in Bridge Mode
The MC58 Eight Channel Power Amplifier has a Bridge
Mode, which doubles the power output for each of the four
Stereo Amplifier Pairs. Two MC58s, together with a CR16
provides higher power out for each of the four Zones.
Note: Only Zone One is illustrated below. Follow a similar
procedure for Zones Two through Four on the MC58.
1. Connect the Loudspeaker Cables to the appropriate
Bridged Channel Output Connections, being careful to
observe the correct polarities.
5. Connect an Audio Cable from the Zone 1 Right Chan-
nel Unbalanced Output of a Multizone Control System,
to the MC58 IN 1 Connector (Right Channel Ampli-
fier).
6. Connect the MC58 power cord to a live AC outlet.
2. Connect a 7 Pin DIN cable from the Power Control
Output of a Multizone Control System to the MC58
MULTI-ROOM Connector (Left Channel Amplifier).
3. Connect a 7 Pin DIN cable from the Multichannel Out-
put of a Multizone Control System to the MC58
McIntosh CR16 Multizone Control System
MULTI-ROOM Connector (Right Channel Amplifier).
4. Connect an Audio Cable from the Zone 1 Left Channel
Unbalanced Output of a Multizone Control System, to
the MC58 IN 1 Connector (Left Channel Amplifier).
Zone One
Left
Loudspeaker
To AC Outlet
Zone One
Right
Loudspeaker
To AC Outlet
10
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Connect in a Home Theater System
How to Connect in a Home Theater System
The MC58 Eight Channel Power Amplifier can be used in
a Home Theater System with three of the six channels in
Bridge Mode. This doubles the power output for the three
front channels.
1. Connect the Loudspeaker Cables to the appropriate
Bridged and Non-Bridged Channel Output Connec-
tions, being careful to observe the correct polarities.
2. Connect a power control cable from the Power Control
Output of a Surround Decoder, to the MC58 POWER
CONTROL IN Connector.
3. Connect Audio Cables from the Surround Decoder
Outputs to the MC58 Inputs as follows:
a. Front Right Output to IN 1
b. Front Center Output to IN 3
c. Front Left Output to IN 5
d. Right Surround Output to IN 7
e. Left Surround Output to IN 8
4. Connect an Audio Cable from the Surround Decoder
Outputs to the Powered Subwoofer Input.
5. Connect the MC58 power cord to a live AC outlet.
McIntosh Surround Decoder
Powered
Subwoofer
Loudspeaker
To AC Outlet
Center Channel
Loudspeaker
Left Surround
Loudspeaker
Right Surround
Loudspeaker
Left Front
Loudspeaker
Right Front
Loudspeaker
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MC58 Front Panel Displays and Controls
POWER LED lights when
the Amplifier Channels 3
and 4 Circuits activate
POWER LED lights when
the Amplifier Channels 7
and 8 Circuits activate
POWER LED lights when
the Amplifier Channels 1
and 2 Circuits activate
POWER LED lights when
the Amplifier Channels 5
and 6 Circuits activate
Remote On
Indicator
POWER GUARD LEDs
POWER GUARD LEDs
light when the amplifier
channels 5 or 6 POWER
GUARD circuits activate
POWER Switch
Turns AC power
On/Off
light when the amplifier
channels 1 or 2 POWER
GUARD circuits activate
POWER GUARD LEDs
POWER GUARD LEDs
light when the amplifier
channels 7 or 8 POWER
GUARD circuits activate
light when the amplifier
channels 3 or 4 POWER
GUARD circuits activate
12
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Operate the MC58
How to Operate the MC58
How to Operate with a Bridged Channel
Power On
The versatile McIntosh MC58 can be used in three differ-
ent Operating Modes. The four channel pairs can be used
in Stereo Mode to supply 50 watts of power to four zones
of a multizone system. Any of the four stereo pairs can be
set to Bridged Mode to supply 100 watts of power when
greater power is desired. The Mono Mode allows two
channels to supply identical mono audio to two separate
loudspeakers. A pair of MC58 channels in Bridged Mode
will produce 100 watts output into
To have the MC58 turn on or off when a multizone system
turns on or off, the front panel power switch must be left in
the on position and the rear panel
power control switch must be in
the remote position. For non-re-
mote operation, set the rear panel
power control switch to local and
use the front panel power switch
to turn the MC58 on or off as de-
sired. Refer to figure 1.
an 8 ohm loudspeaker. Refer to fig-
ures 2, 3 and 4.
Note: There must be a power
control connection between
Figure 1
1. Set the Mode switch to the
Bridged position.
2. Adjust the Bridged Level control to the 2.5V position if
using a McIntosh Multizone System or Control Center.
3. Connect the cable from the signal source component to
the Bridged In jack.
Figure 4
the MC58 and the McIntosh Multizone Control System
or Control Center in order for the remote power turn on
to function.
Input Level Controls
When using a McIntosh Multizone Control System or Con-
trol Center set all five level controls to the 2.5V position. If
a preamplifier or control center has a
4. Connect loudspeaker cables to the terminals marked (-)
and (+) Bridged.
1V output rating, set the controls to
the 1V position. If an increase or de-
crease in amplifier sensitivity is re-
quired for other applications, set the
controls as desired. Refer to figure 2.
Figure 2
Mode Switch
The Mode switch allows a pair of
MC58 channels to be used in three
different operating configurations.
Refer to figure 3.
Stereo: Each channel of a ste-
reo pair operates inde-
Figure 3
pendently as left and right stereo 50 watt am-
plifiers.
Bridged: A channel pair operates in bridged configura-
tion for a single monaural 100 watt amplifier.
Mono: Channel pair inputs are connected in parallel
resulting in identical outputs for each channel.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications
Power Output Per Channel
Power Requirements
50 watts into 4 ohm load and 30 watts into 8 ohm load is
the minimum sine wave continuous average power output
per channel, all channels operating.
100 Volts, 50/60Hz at 5.4 amps
110 Volts, 50/60Hz at 4.9 amps
120 Volts, 50/60Hz at 4.7 amps
220 Volts, 50/60Hz at 3.1 amps
230 Volts, 50/60Hz at 3.1 amps
240 Volts, 50/60Hz at 3.1 amps
Power Output Bridged
100 watts into 8 ohm load is the minimum sine wave con-
tinuous average power output per channel, all channels op-
erating.
Note: Refer to the rear panel of the MC58 for the correct
voltage.
Rated Power Band
20Hz to 20,000Hz
Dimensions
Front Panel: 17-1/2 inches (44.5cm) wide, 7-1/16 inches
(17.9cm) high. Depth behind front mounting panel is 20
inches (50.8cm) including clearance for connectors. Panel
clearance required in front of mounting panel is 3/4 inches
(1.9cm).
Total Harmonic Distortion
Maximum Total Harmonic Distortion at any power
level from 250 milliwatts to rated power output is:
0.005% for 4 ohm loads
0.005% for 8 ohm loads
0.005% for Bridged Mode with 8 ohm loads
Weight
40 pounds (18.1Kg) net, 58 pounds (28.3Kg) in shipping
carton
Dynamic Headroom
1.8dB
Frequency Response
+0, -0.25dB from 20Hz to 20,000Hz
+0, -3.0dB from 10Hz to 100,000Hz
Sensitivity
1 volt (2.5V at level control center detent position)
A-Weighted Signal To Noise Ratio
92dB (112dB below rated output)
Wideband Damping Factor
100 @ 4 ohms
200 @ 8 ohms
Intermodulation Distortion
Maximum Intermodulation Distortion if instanta-
neous peak output per channel does not exceed
twice the rated output, for any combination of fre-
quencies from 20Hz to 20,000Hz, with all channels
operating is:
0.005% for 4 ohm loads
0.005% for 8 ohm loads
0.005% for Bridged Mode with 8 ohm loads
Input Impedance
20,000 ohms
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Packing Instructions
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
below. It is very important that the four plastic feet are at-
tached to the bottom of the equipment. Three #10 x 2-1/4”
screws and washers must be used to fasten the unit securely
to the bottom pad and wood skid. This will ensure the
proper equipment location on the bottom pad. Failure to do
this will result in shipping damage.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please call
or write Customer Service Department of McIntosh Labo-
ratory. Please see the Part List for the correct part numbers.
Quantity Part Number
Description
Shipping carton only
End cap (Foam pad)
1
4
033888
033887
1
1
1
2
1
2
2
033697
033725
034008
017218
033699
101169
104033
Inside carton only
Top Pad
Bottom pad
Plastic foot (spacer)
Wood skid
#10 x 2-¼” Wood screw
#10 x 1-¾” Wood screw
4
4
4
017218
100159
104083
Plastic foot
#10-32 x ¾” Machine screw
#10 x 7/16” Flat washer
1
040572
Shipping carton complete with
all the above parts
15
Download from Www.Somanuals.com. All Manuals Search And Download.
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, NY 13903
McIntosh Part No. 040726
Download from Www.Somanuals.com. All Manuals Search And Download.
|