SACD/CD Player
MCD301
Owner’s Manual
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549
Download from Www.Somanuals.com. All Manuals Search And Download.
14. Refer all servicing to qualified service person-
nel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the appara-
tus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
IMPORTANT SAFETY
INSTRUCTIONS!
PLEASE READ THEM BEFORE
OPERATING THIS EQUIPMENT.
15. Do not expose this equipment to dripping or
splashing and ensure that no objects filled with liq-
uids, such as vases, are placed on the equipment.
16. To completely disconnect this equipment from the
a.c. mains, disconnect the power supply cord plug
from the a.c. receptacle.
17. The mains plug of the power supply cord shall
remain readily operable.
18. Do not expose batteries to excessive heat such as
sunshine, fire or the like.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radia-
tors, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A ground-
ing type plug has two blades and a third ground-
ing prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience re-
ceptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer,
or sold with the apparatus. When a
cart is used, use caution when mov-
ing the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank You
Table of Contents
Your decision to own this McIntosh MCD301 SACD/CD
Player ranks you at the very top among discriminating
music listeners. You now have “The Best.” The McIntosh
dedication to “Quality,” is assurance that you will receive
many years of musical enjoyment from this unit.
Please take a short time to read the information in this
manual. We want you to be as familiar as possible with all
the features and functions of your new McIntosh.
Safety Instructions............................................................2
Thank You and Please Take a Moment.............................4
Technical Assistance and Customer Service....................4
Table of Contents ..............................................................4
General Information .........................................................4
Disc Information...............................................................5
Connector and Cable Information ....................................5
Introduction.......................................................................6
MCD301 Features .............................................................6
Dimensions .......................................................................7
Installation ........................................................................8
Please Take A Moment
The serial number, purchase date and McIntosh Dealer
name are important to you for possible insurance claim or
future service. The spaces below have been provided for
you to record that information:
Connections:
Rear Panel Connections....................................................9
How to Connect Control, Analog and Digital Audio ..... 10
How to Connect Directly to a Power Amplifier ............. 11
Serial Number: __________________________________
Purchase Date: __________________________________
Dealer Name: ___________________________________
Front Panel Features:
Front Panel Displays, Controls, Push-buttons and Jack . 12
Front Panel Information Displays................................... 13
Remote Control:
Technical Assistance
Remote Control Push-buttons......................................... 14
How to Operate by Remote Control ............................... 15
If at any time you have questions about your McIntosh
product, contact your McIntosh Dealer who is familiar
with your McIntosh equipment and any other brands that
may be part of your system. If you or your Dealer wish
additional help concerning a suspected problem, you can
receive technical assistance for all McIntosh products at:
Operation:
How to Operate the MCD301 ......................................... 16
Additional Information:
Specifications..................................................................22
Packing Instruction.........................................................23
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-1545
Fax: 607-724-0549
General Information
1. For additional connection information, refer to the
owner’s manual(s) for any component(s) connected to
the MCD301 SACD/CD Player.
2. The Super Audio Compact Discs Audio Signals are
converted internally from Digital to Analog.
3. A PCM version of the decoded MP3 and WMA Signals
is available at the Digital Audio Outputs.
Customer Service
If it is determined that your McIntosh product is in need of
repair, you can return it to your Dealer. You can also return
it to the McIntosh Laboratory Service Department. For
assistance on factory repair return procedure, contact the
McIntosh Service Department at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917
Copyright 2008 © by McIntosh Laboratory, Inc.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc and Connector Information
Connector and Cable Information
Disc Information
XLR Connectors
1. Compact Discs that are not round (e.g. Novelty discs
with octagonal or heart shapes) will not play properly in
the MCD301 and should not be tried, as possible dam-
age may occur.
Below is the Pin configuration for the XLR Balanced
Output Connectors on the MCD301. Refer to the diagram
for connection:
PIN 1: Shield/Ground
PIN 2: + Output
PIN 3: - Output
2. The MCD301 SACD/CD Player is designed to play all
standard CD Audio Discs that conform to the Official
Compact Disc Standards which is indicated by the
Symbol. It will also play most CD-R and CD-RW discs,
however some recorded discs may not be able to play
due to the condition of the recording.
3. CD Audio Discs recorded in the MP3 and WMA For-
mats will playback on the MCD301, except discs that
contain multi-session recordings. Some MP3 or WMA
recorded discs may not be able to play due to the condi-
tion of the recording. When ever possible, set the writ-
ing software to the ISO9660 Level 1 standard.
4. The CD audio side of the Dual Disc does not meet the
Compact Disc Digital Audio specifications found in the
industry “Redbook”; the MCD301 may not read Dual
Discs.
PIN 2
PIN 1
PIN 3
Power Control Connector
The MCD301 Power Control Input/Output Jacks receive/
send Power On/Off Signals when con-
Power
nected to other McIntosh Components.
Control
A 1/8 inch stereo mini phone plug is
N/C
used for connection to the Power Con-
trol Input/Output on the MCD301.
Ground
Note: The Data ad Power Control Connecting Cable is avail-
able from the McIntosh Parts Department:
Data and Power Control Cable Part No. 170-202
Six foot, shielded 2 conductor, with 1/8 inch stereo mini
phone plugs on each end.
5. Several of the SACD performance features available on
the MCD301 are active only if the SACD Disc includes
the supporting encoded information.
Data and IR Input Port Connectors
The MCD301 Data In Port receives Remote Control Sig-
nals. A 1/8 inch stereo mini phone plug
Data
Signal
is used for connection. The IR Ports
also use a 1/8 inch stereo mini phone
N/C
plug and allow the connection of other
Data
brand IR Receivers to the MCD301.
Ground
IR Data
Control
N/C
Ground
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction and Performance Features
Introduction
• Balanced Outputs
The McIntosh MCD301 SACD/CD Player offers the latest
in audio technology, providing state of the art reproduction
of audio program sources. A full complement of perfor-
mance features allows for the enjoyment of the SACD
special audio format available on discs. Audio CDs are also
reproduced with flawless realism. The advanced mechani-
cal design of the transport ensures many years of smooth
trouble free operation.
The MCD301 has both variable and fixed Balanced Out-
puts, permitting long cable lengths without a loss in sound
quality.
• Digital Audio Outputs
There are Coaxial and Optical Digital Outputs for external
decoding of the PCM Signal.
• Power Control
MCD301 Features
The Power Control Input connection provides convenient
Turn-On/Off of the MCD301 when connected to a McIn-
tosh System with Power Control. The Power Control Out-
put connection can control a McIntosh Power Amplifier in
a high quality disc playback system.
• Twin Laser Pickup
The MCD301 incorporates two laser elements, with differ-
ent wavelengths, that are focused through one lens assem-
bly. This unique design allows reading both the CD and
Super Audio Compact Disc (SACD) Discs Formats.
• Full Function Remote Control
• Advanced Transport
The Remote Control provides complete control of the
MCD301 operating functions including adjustment of the
volume level. The push-buttons on the Remote Control are
illuminated.
The MCD301 has a new transport with a Die Cast Mecha-
nism Base and Disc Tray. It has the latest in advanced
digital servo for faster, quieter and accurate operation. The
SACD and CD Audio Data is read into memory from the
disc at twice the normal rate. The fast read speeds help to
insure better disc tracking and error correction processing.
• Special Power Supply
The Linear Power Supply has both a special R-Core Power
Transformer and Multiple Regulators to ensure stable noise
free operation even though the power line varies.
• Super Audio Disc Playback
The MCD301 plays the higher resolution SACD Discs with
extreme precision and musical elegance.
• Fiber Optic Solid State Front Panel Illumination
The Illumination of the Glass Front Panel is accomplished
by the combination of custom designed Fiber Optic Light
Diffusers and extra long life Light Emitting Diodes
(LEDs). This provides even Front Panel Illumination and is
designed to ensure the pristine beauty of the MCD301 will
be retained for many years.
• Multi-Bit Digital to Analog Converter
The 24-bit, 192kHz Digital to Analog Converter has a
wide dynamic range and extremely low distortion.
• Front Panel Level Control
With headphones connected to the MCD301, the Level
Control allows varing the volume level of the music. It can
also be used for matching the volume level of the MCD301
with other components in the system.
• Multi-Function Front Panel Display
The MCD301 Front Panel display indicates the current disc
playback status and the variable audio output volume level
at the same time on a continuous basis.
• Drive a Power Amplifier Directly
The Variable Output Connections provide up to 6 Volts.
This is more than enough signal to drive any Power Am-
plifier directly; forming a high quality SACD/CD Disc
Playback System.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
Dimensions
The following dimensions can assist in determining the
best location for your MCD301. There is additional in-
formation on the next page pertaining to installing the
MCD301 into cabinets.
17-1/2"
44.45cm
5-3/8"
13.69cm
6"
15.24cm
Front View of the MCD301
.
02:38
31%
17"
43.18cm
4-5/8"
11.75cm
Rear View of the MCD301
13-1/4"
33.65cm
15-7/8"
40.32cm
14-1/2"
36.83cm
5/8"
1.59cm
Side View of the MCD301
4-13/16"
12.22cm
3/16"
0.48cm
13/16"
2.06cm
10-1/2"
26.67cm
1-15/16"
4.92cm
2"
5.08cm
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation
The MCD301 can be placed upright on a table or shelf,
standing on its four feet. It also can be custom installed in
a piece of furniture or cabinet of your choice. The four feet
may be removed from the bottom of the MCD301 when it
is custom installed as outlined below. The four feet togeth-
Allow at least 2 inches (5.08cm) above the top, 2 inches
(5.08cm) below the bottom and 1 inch (2.54cm) on each
side of the SACD/CD Player, so that airflow is not ob-
structed. Allow 17 inches (43.18cm) depth behind the front
panel. Allow 1-1/8 inch (2.9cm) in front of the mounting
er with the mounting screws should be retained for possible panel for knob clearance. Be sure to cut out a ventilation
future use if the MCD301 is removed from the custom
installation and used free standing. The required panel
hole in the mounting shelf according to the dimensions in
the drawing.
cutout, ventilation cutout and unit dimensions are shown.
Always provide adequate ventilation for your MCD301.
Cool operation
ensures the
longest pos-
sible operat-
ing life for
17-1/16"
43.34cm
any electronic
instrument.
MCD301 Front Panel
Custom Cabinet Cutout
4-7/8"
12.38cm
.
02:38
Do not install
the MCD301
directly above
a heat generat-
ing compo-
31%
nent such as a
high powered
amplifier. If
all the com-
ponents are
Cutout Opening for Custom Mounting
Cabinet
Front
Panel
installed in a
single cabinet,
a quiet running
ventilation
MCD301 Side View
in Custom Cabinet
fan can be a
definite asset
in maintaining
all the system
components
at the coolest
possible oper-
ating tempera-
ture.
A custom cabi-
net installation
should provide
the follow-
Cutout Opening for Ventilation
Chassis
Spacers
Support
Shelf
1-1/16"
2.70cm
8-5/8"
21.91cm
1"
2.54cm
MCD301 Bottom View
in Custom Cabinet
15-1/16"
38.26cm
15-1/2"
39.37cm
Cutout Opening
for Ventilation
ing minimum
spacing dimen-
sions for cool
operation.
3"
7.62cm
12-5/16"
31.27cm
Note: Center the cutout Horizontally on the unit.
For purposes of clarity, the above
�
illustration is not drawn to scale.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel Connections
POWER CONTROL IN
receives turn-on signals
from a McIntosh compo-
nent and POWER CON-
TROL OUT sends turn-on
signals on to another
BALANCED VARIABLE level
AUDIO OUTPUTS supply ana-
log audio signals to connect to
Balanced Inputs of other compo-
nents
McIntosh Component
COAXIAL DIGI-
BALANCED FIXED level
AUDIO OUTPUTS supply
analog audio signals to Bal-
anced Inputs of other compo-
nents
TAL AUDIO OUT-
PUT sends signals
to a Control Center
with a D/A Con-
verter or a decoder
DATA IN receives
operating data from
a McIntosh Control
Center
OPTICAL DIGITAL
AUDIO OUTPUT
sends signals to a Con-
trol Center with a D/A
Converter or a decoder
UNBALANCED FIXED
level AUDIO OUTPUTS
supply analog audio
signals to Unbalanced In-
puts of other components
IR INput for
connecting an IR
Receiver
Connect the MCD301
power cord to a live AC
outlet. Refer to informa-
tion on the back panel of
your MCD301 to deter-
mine the correct voltage
for your unit
UNBALANCED VARIABLE
level AUDIO OUTPUTS supply
analog audio signals to Unbal-
anced Inputs of other components
9
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Connect Control, Analog and Digital Audio
How to Connect Control, Analog and Digital
Audio
1. Connect a Power Control Cable from the MCD301
POWER CONTROL IN jack to the POWER CONTROL
ACC Output jack of a McIntosh Preamplifier/Control
Center.
2. Connect a Data Cable from the MCD301 DATA IN jack
to the CD2 DATA jack on the McIntosh Preamplifier/
Control Center.
3. Connect an Optical Cable from the MCD301 OPTICAL
DIGITAL AUDIO OUTPUT to the CD2 Optical DIGI-
TAL INPUT of a McIntosh Preamplifier/Control Center.
Note: An optional connecting method is to use a coaxial
cable from the MCD301 COAXIAL DIGITAL AUDIO
OUTPUT to the Coaxial Digital Input of a McIntosh
Preamplifier/Control Center.
4. Connect XLR Cables from the MCD301 BALANCED-
FIXED AUDIO OUTPUTS to the Balanced Inputs on a
McIntosh Preamplifier/Control Center.
Notes: 1. The Unbalanced Audio Ouputs may be used in-
stead of the Balanced Outputs.
2. The VARIABLE AUDIO OUTPUTS, Balanced
or Unbalanced outputs, may used instead of the
FIXED AUDIO OUTPUTS.
5. Connect the supplied AC Power Cord between the
MCD301 AC Power Cord Socket and a live AC outlet.
To AC Outlet
McIntosh A/V Control Center
10
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Connect Directly to a Power Amplifier
How to Connect Directly to a Power Amplifier
The MCD301 SACD/CD Player has Variable Output Con-
nections and a Front Panel Level Control making it pos-
sible to form a high performance Disc Playback System.
This system consists of a MCD301 directly connected to a
McIntosh Power Amplifier.
3. Connect the supplied AC Power Cord between the
MCD301 AC Power Cord Socket and a live AC outlet.
1. Connect a Power Control Cable from the MCD301
POWER CONTROL OUT jack to the POWER CON-
TROL IN jack of a McIntosh Power Amplifier.
2. Connect XLR Cables from the MCD301 BALANCED
VARIABLE AUDIO OUTPUTS to the Balanced Inputs
on a McIntosh Power Amplifier.
Note: The Unbalanced Audio Ouputs may be used instead
of the Balanced Outputs.
To AC Outlet
McIntosh Power Amplifier
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Displays, Controls, Push-buttons and Jack
Audio Output
Mute On Indicator
Disc Tray opens to
load and unload a disc
Adjusts the listening
volume level
Connection for low
Allows moving back-
wards or forwards one
track at a time
IR Sensor receives
commands from a
Remote Control
Standby Power On
Indicator
impedance dynam-
ic headphones, for
private listening
.
02:38
31%
Selects the SACD
Selects the
Random Track
Playback Mode
Front Panel
Information
Use to Pause Opens and
or CD Audio
Tracks from a
hybrid disc
during play-
back
Closes the
disc tray for
loading or
unloading
discs
Push to mute the audio
at rear panel Audio
Output Connectors
(Headphones are not
affected)
Selects various
Front Panel
Information
Stops disc
playback
Starts disc
playback
STANDBY/ON
playback times
for indication on
the display
Push-button switch-
es the MCD301 ON
or OFF (Standby)
and resets the micro-
processors
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Information Displays
Indicates when
in the Pause
Mode
Indicates the Programming
or Program Play Mode is
active
Indicates the Repeat
Mode selected; Repeat
All (Tracks), Repeat 1
(Track) or Repeat from
point A to point B in
the selected Track
Indicates the volume
level available at the
variable outputs and
headphone jack
Indicates the type
of disc loaded, CD
or SACD
Indicates
Indicates when the
tracks on the CD disc
are MP3 or WMA
encoded
the Random
Play Mode
is active
31%
Indicates when
the Play Mode
is active
Indicates the number of tracks
on the Disc, Programmed
Tracks, the current Track Time,
Remaining Track Time, Total
Disc Playing Time, Text and
various other Information
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Push-Buttons
Use to toggle the power On and Off
to the MCD301
Access any numbered operat-
ing function
Use to Clear the last pro-
grammed track
Use to direct access tracks 10 and
above
Adjusts the volume level up or down
Use to select various disc
information, including time,
on the Front Panel Display.
It is also used to cancel the
text display mode on a SACD
Disc.
Access the Text Display Mode when
playing a SACD Disc containing the
information
Starts Playback of a disc and
allows moving forwards or
backwards one track at a time
on SACD and CD Discs
Used to stop the disc and pause play-
back of the disc
Move forward or backward through
a disc
Press for random playback of
tracks from SACD and CD
Discs
Use to program the desired tracks on
a SACD or CD disc
Use to select one of various
repeat modes
Use to select the SACD or CD
Tracks from a hybrid disc for play-
back
Use to review the programmed
tracks of the disc on the Front
Panel Information Display, while
in the program mode
Note: The Remote Control Push-buttons with a “grayed background” are for use with other McIntosh Products.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the Remote Control
How to use the Remote Control
SACD/CD
The Remote Control is capable of performing basic Oper-
ating Functions for the MCD301 SACD/CD Player.
Notes: 1. Refer to the “How to Operate” Section of this man-
ual for additional information using this Remote
Control.
Press to select the SACD or CD Tracks from a hybrid disc
for playback.
Display/Time
2. The translucent Remote Control Push-buttons
will illuminate for approximately 3 seconds when
activated.
Press the DISPlay/TIME Push-button to access various
disc times. It is also used to return the Front Panel Infor-
mation Display to indicating time instead of text informa-
tion on a SACD Disc.
Play
With a disc loaded, press the PLAY Push-button to start
the disc playing.
Menu/Text
Press to select the various text information on a SACD
Disc such as Album, Artist and Track Titles (disc depen-
dent).
Stop
Press the STOPPush-button to stop disc playback and
return to displaying the table of contents of the disc.
Repeat Modes
Press the RPT (Repeat) Push-button to select either One
Track, All Tracks or cancel the Repeat Mode.
Numbered Push-buttons
Press 1 through 9 to directly access one of the first nine
Disc Tracks using the Front Panel Information Display. For
track numbers greater than 10, press the +10 Push-button
followed by the 0-9 Push-button. For example, to access
Disc Track 23, press the +10 Push-button twice and then
the 3 Push-button.
Program
Press the PGM (Program) to activate the Program Mode to
playback only certain disc tracks in the desired order.
Review
Press the RVW (Review) Push-button to review the Pro-
grammed Tracks from the disc on the Front Panel Informa-
tion Display, while in the Program Mode.
Pause
Press the PAUSEPush-button to temporarily stop disc
playback at any time. Press the PLAY Push-button to
resume playback.
Clear
Press the CLEAR Push-button to erase a program track(s).
REV and FF
Press the REV (Reverse)or FF (Fast Forward)Push-
button to start moving rapidly through a track on the disc.
When the desired location is reached release the REV
(Reverse)or FF (Fast Forward)Push-button to resume
normal playback.
Back and Next
Press the NEXT Push-button to move forward one track
or the BACK Push-button to move back to the begin-
ning of the current track playing.
Note: If the BACK Push-button is pressed during play-
back of the first three seconds of the track, the MCD301
will start playing back the previous track from the
beginning. If the Front Panel Information Display is
indicating time the display will momentarily indicate the
track number.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Operate the MCD301
press the SACD/CD Push-button (on the
Front Panel or Remote Control) once to
see the current selection and a second
time to change the selection. Refer to
figures 6, 7, 8 and 16.
The Player will load the CD Table of
Contents (Number of tracks and Total Play-
ing Time) at this time. To start playing the
CD Layer press the PLAY Push-button.
Power On
The Red LED above the STANDBY/ON Push-button lights
to indicate the MCD301 is in Standby mode. To Switch
ON the MCD301, press the STANDBY/ON Push-button
on the Front Panel or the PWR (Power) Push-button on the
Remote Control. Refer to figures 6 and 16.
Note: When AC Power is initially applied to the MCD301
the unit will momentarily switch On and then go
into the Standby Mode.
Figure 7
Figure 8
How to Load a Disc
1. Press the OPEN/CLOSE Push-button.
Notes: 1. Changing between the SACD and CD Layer can
be accomplished at any time by performing the
above procedure.
The disc tray will slide out allowing a
2. The default setting for SACD/CD Hybrid is to
play the SACD Layer. The default setting may be
changed to play the CD Layer instead. With the
MCD301 On and no disc loaded, press the SACD/
CD Push-button utill the Front Panel Display indi-
cates CD. Refer to figures 6, 9, 7 and 8.
3. Some SACD Disc(s)
disc to be loaded. Refer to figure 1.
2. Press the OPEN/CLOSE Push-button
and the disc tray will close. Refer
to figures 6, 2, 3 and 5. Loading of
disc’s Table of Contents (number of
tracks) will be indicated on the
Figure 1
Figure 2
Front Panel Information Display.
When a SACD Disc is loaded
the Front Panel Display will
have the abil-
ity of displaying
the Album Title and
Figure 3
Figure 9
Artist. With the disc
scroll the Album Title first and
loaded, SACD Table
of Contents read and
the disc stopped,
press the MNU/TEXT
Push-button once for
scrolling the Title
and twice for scroll-
ing the Artist Name.
then display the number of tracks. Refer to figures 4 and
5.
Note: When a Disc is placed in the
tray and the PLAY Push-but-
ton is pressed, the tray will
Figure 4
Figure 10
close and the first track will
start playing.
Display of the Artist
information is not
Figure 11
How to Play a SACD Disc
With a disc already loaded into the
MCD301, press the PLAY Push-
Figure 5
available during playback of the disc. Refer to
figures 10 and 11.
button on the Front Panel of the MCD301 or Remote Con-
trol. Refer to figures 6 and 16. The Disc will start playing
the first track of the SACD Layer.
4. In a similar manner, some SACD Disc(s) have the
ability of scrolling the Track Number and Title by
pressing the MNU/TEXT Push-button after the
Track has started to play. Refer to figure 12.
To change from the default SACD Layer to CD Layer,
.
02:38
31%
Figure 6
16
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Operate the MCD301
5. The Text Display
Mode may be can-
celed by pressing the
DSP/TIME Push-but-
ton on the Remote
Fast Forward or Reverse
Using the Remote Control, press the
FF (Fast Forward) or REV (Re-
verse) Push-button to search back
and forth rapidly through a Track on
a disc. To return to normal playback
release the same FF (Fast Forward)
or REV (Reverse) Push-button.
Refer to figure 16.
Figure 12
Control. Refer to figure 16.
6. One of the Track Time Modes may also be dis-
played instead of the Track Number, by pressing
the DSP/TIME Push-button on the Remote Con-
trol. Refer to figure
13. For additional
information on the
Time Display Modes
refer to “Display
Modes” on page 19.
Stop Mode
02:36
Press the STOPPush-button at
any time to stop Playback. To listen
to the disc again, press the PLAY
Push-button and playback will start
from the beginning of the disc.
Figure 13
How to Play a CD Disc
With a disc already loaded into the MCD301, press the
PLAY Push-button on the
Volume Level
Front Panel of the MCD301 or
The MCD301 has both Fixed and
Variable Output Level Connections.
The Variable Output Level Connec-
tions (Rear Panel and Front Panel
Headphone Jack) are controlled by
the Front Panel Level Control and the
LEVEL Push-buttons on the Remote
Control. Refer to figures 6, 16 and
17. The Front Panel Volume Level
Information Display will indicate the
Volume Level from 0 - 100%.
Note: When the Volume Level is 81%, the
Rear Panel Variable Outputs will be
at the same volume level as the Fixed
Outputs.
Remote Control. Refer to figures
6, 14 and 16.
Figure 14
How to Pause a Disc
This feature allows for the temporary stopping of disc
playback. Refer to figures 6, 15
and 16.
1. When playing a Disc, press
the PAUSEPush-button to
temporarily stop playback.
Figure 15
Figure 16
2. Press the PLAY Push-button to resume playing the
LEVEL
disc.
Track Back
Figure 17
Return to the beginning of the Track currently playing
by rotating the MCD301 Front Panel TRACK BACK
Control counterclockwise and then releasing the control
or momentarily pressing the BACK Push-button on
the Remote Control. Rotate and hold the TRACK BACK
Control or press and hold the BACK Push-button
for rapid selection of the desired previous Tracks. Refer to
figures 6 and 16.
Mute
Press the MUTE Push-button to mute the audio (-50dB
down in level) at both the Fixed and Variable Output Con-
nections on the Rear Panel. Refer to figure 6. The LED
above the MUTE Push-button will illuminate. Pressing the
MUTE Push-button a second time restores the audio at the
output connections and the LED will no longer be illumi-
nated.
Note: The Headphone Jack is not affected by the Mute
Track Next
Function.
Advance to the next Track by rotating the MCD301 Front
Panel TRACK NEXT Control clockwise and then re-
leasing the control or momentarily pressing the NEXT
Push-button on the Remote Control. Rotate and hold the
TRACK NEXT Control or press and hold the NEXT
Push-button for rapid selection of the next desired
Track. Refer to figures 6 and 16.
Direct Track Selection
The MCD301 Front Panel Display indicates the Disc Track
currently playing. Use the Remote Control NUMERIC
Push-button(s) to enter the desired Track Number. Refer
to pages 14 and 15 for additional information using the
Remote Control.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Operate the MCD301, con’t
Repeat
is programmed to play Track 6 followed by Track 4 and
then Track 2.
This allows repeating a Track, Disc, Program Mode or
Random Play Mode on a continuous basis. Refer to figures
6 on page 16 and 16.
1. With the disc playing (Regular, Program or Random
Playback Modes), press the
Notes: 1. The MCD301 must be in STOP Mode with the Disc
TOC (Table of Contents) read before the Program
Playback Mode Feature can be activated.
2. When programming Hybrid SACD Discs, first
choose the layer (SACD or CD) so the correct TOC
can be read, as some discs have different selections
for the SACD and CD Tracks.
RPT (Repeat) Push-button
once to activate the Track
Repeat ( 1); press the
RPT Push-button twice to
activate the Disc Repeat
(All). Refer to figures
Figure 18
1. Press the PGM (Program)
Push-button to access the
Program Mode. Refer to
figures 16 and 21.
2. Enter the first desired se-
lection using the Numeric
Push-buttons. Refer to
figures 16 and 22.
3. In a similar manner, enter
the remaining Tracks. Re-
fer to figures 23 and 24.
Note: To view and/or
delete the selec-
Figure 21
18 and 19.
4. To cancel the previously se-
lected Repeat Mode, press
Figure 19
P01 06Tr
the RPT (Repeat) Push-button until the word “1” or the
word “ALL” in the Front Panel Information Display is
extinguished.
Figure 22
Random Playback
P02 04Tr
Figure 23
This feature allows for listening to Tracks of a Disc in a
Random Order. Refer to figure 6 on page 16 and figure 16.
Note: The MCD301 must be in STOP Mode with the Disc
Loaded and the Table of Contents read before the
Random Playback Mode Feature can be activated.
1. With the MCD301 in the STOPMode press the
Random Push-button. The word RND (Random) will
be indicated in the Infor-
tions programmed,
use the REVIEW
Push-button to
step through pro-
grammed tracks
Figure 24
and the CLEAR
Push-button to remove any unwanted selections.
4. To start playback of the just entered program, press
the PLAY Push-button. The Repeat Mode can be
activated to provide continuous playback of the Pro-
grammed Track(s). Refer to figure 25.
Note: To momentarily stop
mation Display. Refer to
figure 20.
2. Press the PLAY Push-
Figure 20
button to start Random
Playback. After all the tracks have been played the
MCD301 will stop.
Notes: 1. To provide continuous playback of the disc,
press the RPT Push-button twice to activate the
Disc Repeat (All) after the Random Playback
Mode has started. If Repeat (1) is selected,
the current track will repeat.
playback, press the
PAUSE Push-
button. To resume
Program Playback
Figure 25
press the PLAY Push-button.
5. To cancel the Program Playback Mode press the
STOPPush-button followed by pressing the PGM
(Program) Push-button.
Once the Program Playback Mode is active, tracks may be
added or deleted by first pressing the STOPPush-button
followed by entering the additional tracks using the Nu-
meric Push-buttons or deleting tracks by using the CLEAR
Push-button. Press the PLAY Push-button to resume
Program Playback Mode.
2. The BACK TRACK function will begin playback
from the beginning of the current track.
3. The NEXT TRACK function will advance to the
next random selection and start playing.
3. To cancel the Random Playback Mode, press the
STOPPush-button, then press the Random Push-
button.
Program Playback
This feature allows for playback of selected Tracks on a
Disc in the desired order. In the following example, a Disc
MP3/WMA Disc Playback
The MCD301 has the ability of playing back MP3 and
18
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Operate the MCD301, con’t
Display Brightness
WMA encoded discs. MP3/WMA allow more tracks on
the Disc by using the technique of lossy compression ap-
plied to the original audio information. The MP3/WMA
Track has lower audio quality
The MCD301 Front Panel Information Display has two
brightness settings. To change from the default setting
(brightest of the two) perform the following:
1. If the MCD301 is playing a disc press the STOP
Push-button.
2. Press and hold the PAUSEPush-button until the
brightness level of the two Front Panel Displays chang-
es, then release the PAUSEPush-button.
Note: Depending on the brightness setting before press-
ing the push-button, the intensity will go from high
to low or low to high.
than the original recording.
Load a MP3/WMA disc into
the MCD301. Refer to figure
Figure 26
26.
1. Press the PLAY Push-button to start Playback. Refer
to figure 27. After all the tracks have been played the
MCD301 will stop.
Notes: 1. The MCD301
will indicate
either elapsed
time or remain-
d
Resetting the MCD301
In the unlikely event the MCD301 stops functioning, the
microprocessors can be reset by performing the following:
1. Press and hold in the STOPPush-button for ap-
proximately three seconds. The Front Panel Display
on the Left side will
Figure 27
ing time for each
track when play-
ing MP3/WMA
Discs.
02Fd26Tr
2. When play-
ing MP3/WMA
Discs, the left side of the Front Panel Informa-
tion Display indicates the total number of fold-
ers on the disc followed by the Track Number
or the Track
Figure 28
indicate “INITIAL”,
release your finger from
STOPPush-button.
Refer to figure 35.
Figure 35
2. Press and hold in the
Time.
STANDBY/ON Push-button for
approximately five seconds. Refer
to figure 6 on page 16.
3. When the STANDBY/ON LED is
no longer illuminated, release the
STANDBY/ON Push-button.
4. When the STANDBY/ON LED is
illuminated press the STANDBY/
ON Push-button, the MCD301 will
resume normal operation.
Display Modes
Figure 29
The MCD301 Front Panel
Information Display allows for
either Track or Time indica-
tions. To change from the
default setting of Track indica-
tion to Time, press the TIME
Push-button on the Front Panel
Figure 30
Note: This can be performed with
or the DISP/TIME Push-button
on the Remote Control. Refer
to figure 6 on page 16 and
the MCD301 On or in the
Standby Mode.
Figure 31
figure 16.
The Time Display Choices
are Single Track Elapse Time
-01:13
(figures 29 and 30), Single
Figure 32
Track Remaining Time (fig-
ures 31 and 32) or Total Tracks
Remaining Time (figures 33
and 34).
Figure 33
Figure 16
Figure 34
19
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Operate the MCD301, con’t
How to Operate the MCD301, con’t
Operation in a McIntosh System
The MCD301 basic transport functions may also be con-
trolled by using the Remote Control that comes with a Mc-
Intosh Control Center or Preamplifier. McIntosh Keypads
can also be used to remotely control the basic transport
functions of the MCD301. The labeling of Push-buttons on
some McIntosh Remote Controls and Keypads are differ-
ent from the supplied MCD301 Remote Control. Refer to
the listing below and figures 36 and 37:
MCD301 Remote Control
Push-button
Pause
McIntosh Remote Control/
Keypad Push-button
E/Enter
Figure 37
SACD/CD
Level Down
Level Up
Review
Channel/Seek Down
Channel/Seek Up
FM
+10
Figure 36
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Audio Specifications
General Specifications
Fixed Output level
2.0Vrms Unbalanced
4.0Vrms Balanced
Digital Output
Optical: - 15dbm to -21dbm (PCM)
Coaxial: 0.5V p-p/75 ohm (PCM)
Sampling Frequencies: 44.1kHz (PCM)
Variable Output level
0 - 6.0Vrms Unbalanced
0- 12.0Vrms Balanced
Transport
Laser Type: Twin Beam
Laser Beam Wavelength: 650nm (SACD)/790nm (CD)
Laser Power: CLASS IIa/CLASS I
Output Impedance
600 ohms Unbalanced and Balanced
Power Requirements
Frequency Response
4Hz to 40,000Hz, +0.5, -3dB (SACD)
4Hz to 20,000Hz, ±0.5dB (CD)
100 Volts, 50/60Hz at 35 watts
110 Volts, 50/60Hz at 35 watts
120 Volts, 50/60Hz at 35 watts
220 Volts, 50/60Hz at 35 watts
230 Volts, 50/60Hz at 35 watts
240 Volts, 50/60Hz at 35 watts
Standby: Less than 1 watt
Signal to Noise Ratio
Better than 110dB (A-weighted)
Note: Refer to the rear panel of the MCD301 for the correct
Dynamic Range
Better than 100dB
voltage.
Overall Dimensions
Harmonic Distortion
Width is 17-1/2 inches (44.45cm)
Height is 6 inches (15.24cm)
0.002% @ 1000Hz (SACD)
0.003% @ 1000Hz (CD)
Depth is 16-1/2 inches (41.91cm)
Note: When the Disc Tray is opened, the panel clearance
required in front of mounting panel is 6-3/4 inches
(17.2cm).
Channel Separation
Better than 98dB (1,000Hz)
Weight
28.2 pounds (12.8Kg) net, 44.6 pounds (20.2Kg) in ship-
ping carton
Shipping Carton Dimensions
Width is 26-1/2 inches (67.3cm)
Depth is 24-1/4 inches (62.2cm)
Height is 11-3/4 inches (29.9cm)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Packing Instructions
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
below. It is very important that the four plastic feet are at-
tached to the bottom of the equipment. This will ensure the
proper equipment location on the bottom pad. Failure to do
this will result in shipping damage.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please
call or write Customer Service Department of McIntosh
Laboratory. Refer to page 4. Please see the Part List for the
correct part numbers.
Quantity Part Number Description
1
4
033838
033837
Shipping carton only
End cap
1
1
1
033836
033725
034301
Inside carton only
Top pad
Bottom pad
4
4
4
017937
400159
404080
Plastic foot
#10-32 x 3/4” screw
#10 Flat washer
23
Download from Www.Somanuals.com. All Manuals Search And Download.
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, NY 13903
The continuous improvement of its products is the
policy of McIntosh Laboratory Incorporated who
reserve the right to improve design without notice.
Printed in the U.S.A.
McIntosh Part No. 04105900
Download from Www.Somanuals.com. All Manuals Search And Download.
|