Compact Refrigerators & Freezers
Service, Installation and Care Manual
Please read this manual completely before attempting to install or operate this equipment!
Notify carrier of damage! Inspect all components immediately. See page 3.
ATION
NFORM
TANT I
IMPOR
E USE
BEFOR
READ
ONS!
RUCTI
E INST
E THES
E SAV
PLEAS
June 2010
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact Refrigerators and Freezers Service and Installation Manual
Specifications
Work top refrigerator or freezer bases with stainless steel top & backsplash
3
2
Model
Description
L
D
H
Storage Ft.
5.7
Shelves Ft.
H.P.
1/5
Refg. Charge
7.0
Amp
4.0
NEMA Plug Ship Weight
MCCSTR27
refrigerator
27.25”
(69cm)
28.50”
(72cm)
39.50”
(100cm)
7.2
5-15P
5-15P
5-15P
5-15P
176lbs
(80kg)
MCCSTF27
MCCSTR48
MCCSTF48
freezer
refrigerator
freezer
27.25”
(69cm)
28.50”
(72cm)
39.50”
(100cm)
5.7
7.2
1/5
1/5
1/3
7.0
7.0
7.0
5.8
4.0
5.8
176lbs
(80kg)
48.00”
(121.9cm)
28.50”
(72cm)
39.50”
(100cm)
11.4
11.4
13.0
13.0
234lbs
(106kg)
48.00”
(121.9cm)
28.50”
(72cm)
39.50”
(100cm)
234lbs
(106kg)
Undercounter refrigerator or freezer bases with stainless steel top
3
2
Model
Description
L
D
H
Storage Ft.
Shelves Ft.
H.P.
1/5
Refg. Charge
7.0
Amp
4.0
NEMA Plug Ship Weight
MCCR27
refrigerator
27.25”
(69cm)
28.50”
(72cm)
35.50”
(90cm)
5.7
7.2
5-15P
5-15P
5-15P
5-15P
176lbs
(80kg)
MCCF27
MCCR48
MCCF48
freezer
refrigerator
freezer
27.25”
(69cm)
28.50”
(72cm)
35.50”
(90cm)
5.7
7.2
1/5
1/5
1/3
7.0
7.0
7.0
5.8
4.0
5.8
176lbs
(80kg)
48.00”
(122cm)
28.50”
(72cm)
35.50”
(90cm)
11.4
11.4
13.0
13.0
236lbs
(107kg)
48.00”
(122cm)
28.50”
(72cm)
35.50”
(90cm)
236lbs
(107kg)
Installation
Location
Units represented in this manual are intended for indoor use
only. Be sure the location chosen has a floor strong enough to
support the total weight of the cabinet and contents. Reinforce the
floor as necessary to provide for maximum loading.
For the most efficient refrigeration, be sure to provide good air
circulation inside and out.
Inside cabinet: Do not pack refrigerator so full that air cannot
circulate.
Outside cabinet: Be sure that the unit has access to ample
air. A minimum space of 3” (7.6cm) at the back of the unit
and 1” (2.5cm) at the top and sides is required to conform to
Underwriters Laboratories’ standards. On undercounter units it is
imperative that the proper air flow be maintained. The refrigeration
system is designed so air will flow under the unit, over the
compressor/condenser area, and out at the top rear of the unit.
Avoid hot corners and locations near stoves and ovens.
Never stand on the unit! Doing so may result in bodily
injury. They are not designed to hold the weight of an
adult and will collapse if misused in this manner.
Stabilizing
Some models are supplied on casters for your convenience, for
ease of cleaning underneath and mobility.
The unit must be installed in a stable condition
with the front wheels locked. Locking the front
casters after installation is the owner’s and operator’s
responsibility.
Plumbing
Self-contained models are standard with a condensate evaporator.
If, for some reason, a unit does not have a condensate evaporator,
or the evaporator fails, the unit’s drain must have an outlet to an
appropriate drainage area or container.
Moisture collecting from improper drainage can
create a slippery surface on the floor and a hazard to
employees. It is the owner’s responsibility to provide
a container or outlet for drainage.
Any restriction of the proper air flow outlined
above, total or partial, will void the warranty on
the unit.
CAUTION
Electrical connection
Leveling
Refer to the amperage data on page 3, the serial tag, your
local code or the National Electrical Code to be sure the unit is
connected to the proper power source. A protected circuit of the
correct voltage and amperage must be run for connection of the
line cord, or permanent connection to the unit.
A level cabinet will perform better because the drain pan will drain
properly, the doors will line up with the frames and the cabinet will
not be subject to undue strain.
All four legs are adjustable. Adjust each leg until the unit is stable
and level left to right. If necessary adjusting the front legs slightly
higher than the rear by about 1/8” (0.3cm) will help the doors
remain closed.
If the unit is supplied with casters, no adjustments are available.
Ensure the floor where the unit is to be located is level.
A 7’ (2.1 m) long grounded supply cord and plug are provided
with standard units. Simply plug the unit in to begin operation.
The thermostat must be turned to OFF and the unit
disconnected from the power source whenever
performing service, maintenance functions or
cleaning the refrigerated area.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact Refrigerators and Freezers Service and Installation Manual
Caster Installation
1. Carefully place the unit on its back (see illustration at right).
2. Remove legs by unscrewing them in a counter clockwise direction.
Plate Casters
W/Locks
3. Located on each end of the compressor channel are 4 hex head screws, for a total of
8 screws. Remove them. 8 additional screws are provided with your casters.
4. Place a locking plate caster over one of the front holes, matching the 4 mounting
holes to the pre-drilled holes in the underside of the unit. Insert 4 hex head screws
and tighten. Repeat with the other locking front casters.
Plate Casters
W/O Locks
#14 x .75" Hex Head
Screws #932-1116
5. Repeat step 4 with the non-locking casters in the rear of the unit.
6. Carefully lift the unit upright.
After installing casters, the unit must stand upright for twenty-four (24)
hours before being powered up to assure oil return to the compressor
sump.
WARNING
Caster/Leg Mounting Detail
2”, 3” and 5” Caster and Leg Mounting Detail
A universal bolt hole pattern is provided on the bottom of the cabinet. It will accommodate any leg or caster. Simply line up the plate
holes with the corresponding cabinet holes.
2.38”
1.75”
0.94”
3.40”
2.14”
2.82”
NOTE:
NOTE:
NOTE:
If hole pattern on caster/
leg matches the one above
mount in outer set of holes.
If hole pattern on caster/leg
matches the one above mount
in middle set of holes.
If hole pattern on caster/leg
matches the one above mount
in inner set of holes.
6” Leg - 3234569
3” Caster - 3234024
5” Caster - 3234161
2” Caster - 3234148
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact Refrigerators and Freezers Service and Installation Manual
Operation
After the unit is connected to power it will automatically begin and toward “7” for lower temperatures.
operating. With the doors closed, the temperature of the Freezers: A thermostat located in the evaporator housing on
cabinet should reach 36°F to 40°F (2°C to 4°C) on refrigerators interior rear of the unit, controls the temperature in the box.
or 0°F (-18°C) on freezers in about one hour.
The factory setting for the control is “4” and maintains about -
3°F (-18°C) in the box. Set toward “1” for higher temperatures
and toward “7” for lower temperatures.
Temperature control instruction
Refrigerators: A thermostat located in the evaporator housing
on interior rear of the unit, controls the temperature in the box.
The factory setting for the control is “4” and maintains about
38°F (3°C) in the box. Set toward “1” for higher temperatures
Continuous opening and closing of the doors will hamper the
unit’s ability to maintain optimum refrigeration temperature.
Door Maintenance
Adjusting door hinges
Doors have been adjusted at the factory. If it becomes
necessary to adjust a door, follow these instructions:
1) If the door needs lowering at the handle, use a 5/16” wrench
to loosen the hinge screws and install a spacer outside of
the hinge (see illustration 1). Tighten the screws.
2) If the door needs to be higher at the handle, use a 5/16”
wrench to loosen the hinge screws and install a spacer
inside of the hinge (see illustration 2). Tighten the screws.
Illustration 1:
spacer outside
Illustration 2:
spacer inside
Defrosting
Refrigerators
Refrigerators defrost automatically with every cycle of the
compressor. The water generated is routed to a pan on the
rear of the unit and is evaporated by the heat given off by the
compressor.
refrigeration cycle. Once all frost is eliminated, the temperature
of the coil continues to rise until it reaches 27 minutes. The
defrost control switches to refrigeration mode. Defrost will
initiate every six hours.
Turn the screw ONLY in a clockwise direction,
turning the screw counter-clockwise will break
the cam motor.
Freezers
Whendefrostcontrolgoesintodefrost, powertothecondensing
unit and evaporator fans is interrupted and the defrost heater
is energized. The defrost heater warms the evaporator coil
thereby melting all frost accumulated during the previous
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact Refrigerators and Freezers Service and Installation Manual
Door Hinge Reversal Instructions
Units with reversible doors will have 2 extra screws on the bottom of the door.
Follow these instructions to reverse the door hinging if applicable.
Disconnect power before beginning work.
1. Tip unit back and use a screwdriver to remove the bottom hinge pin. Note
that lock-tight was used during factory installation, so extra force may be
required to “break” the hinge pins loose.
2. Tilt door out from bottom and slide top pin out of the hinge bracket. Remove
top hinge pin.
3. Use a screwdriver to remove 2 screws and handle from top of door.
4. Flip door upside down. Remove two screws, then install the handle using the
screws removed in step 3.
Top hinge template up
to unit nosing
5. Insert the 2 screws removed in step 4 into old screw locations.
6. Remove top and bottom hinge brackets from cabinet face.
7. Use templates (found on the next page) to locate holes as shown to the right.
Use a 1/8”drill for pilot holes being certain to drill through both the face frame
AND the metal backing plate.
8. Install top and bottom hinge brackets in new locations.
9. Install top hinge pin into top of door, then slide top door hinge pin into top
hinge bracket and close door onto cabinet face.
10. Install bottom hinge pin through bottom hinge bracket and into door.
11. Fill the holes in the face frame at original hinge locations with #10 sheet metal
screws (not provided).
Bottom hinge template
down to unit bottom
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact Refrigerators and Freezers Service and Installation Manual
Door Hinge Reversal Templates
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact Refrigerators and Freezers Service and Installation Manual
Maintenance
The thermostat must be turned to OFF and the unit Stainless Steel Care and Cleaning
To prevent discoloration or rust on stainless steel several
disconnected from the power source whenever
performing service, maintenance functions or
cleaning the refrigerated area.
important steps need to be taken. First, we need to understand
the properties of stainless steel. Stainless steel contains 70-80%
iron which will rust. It also contains 12-30% chromium which
forms an invisible passive film over the steels surface which
acts as a shield against corrosion. As long as the protective
layer is intact, the metal is still stainless. If the film is broken
or contaminated, outside elements can begin to breakdown the
steel and begin to form rust of discoloration.
Refrigerators and Freezers
The interior and exterior can be cleaned using soap and warm
water. If this isn’t sufficient, try ammonia and water or a
nonabrasive liquid cleaner. When cleaning the exterior, always
rub with the “grain” of the stainless steel to avoid marring the
finish.
Proper cleaning of stainless steel requires soft cloths or plastic
scouring pads.
Do not use an abrasive cleaner because it will scratch the
stainless steel and plastic and can damage the breaker strips
and gaskets.
NEVER USE STEEL PADS, WIRE BRUSHES OR
SCRAPERS!
Cleaning the Condenser Coil
The condenser coil requires regular cleaning, recommended is
every 90 days. In some instances though you may find that
there is a large amount of debris and dust or grease accumulated
prior to the 90 day time frame. In these cases the condenser coil
should be cleaned every 30 days.
Cleaning solutions need to be alkaline based or non-chloride
cleaners. Any cleaner containing chlorides will damage
the protective film of the stainless steel. Chlorides are also
commonly found in hard water, salts, and household and
industrial cleaners. If cleaners containing chlorides are used be
sure to rinse repeatedly and dry thoroughly upon completion.
If the build up on the coil consists of only light dust and debris
the condenser coil can be cleaned with a simple brush, heavier
dust build up may require a vacuum or even compressed air to
blow through the condenser coil.
Routine cleaning of stainless steel can be done with soap and
water. Extreme stains or grease should be cleaned with a non-
abrasive cleaner and plastic scrub pad. It is always good to
rub with the grain of the steel. There are also stainless steel
cleaners available which can restore and preserve the finish of
the steels protective layer.
If heavy grease is present there are de-greasing agents available
for refrigeration use and specifically for the condenser coils.
The condenser coil may require a spray with the de-greasing
agent and then blown through with compressed air.
Early signs of stainless steel breakdown can consist of small
pits and cracks. If this has begun, clean thoroughly and start to
apply stainless steel cleaners in attempt to restore the passivity
of the steel.
Failure to maintain a clean condenser coil can initially cause high
temperatures and excessive run times, continuous operation
with dirty or clogged condenser coils can result in compressor
failures. Neglecting the condenser coil cleaning procedures will
void any warranties associated with the compressor or cost to
replace the compressor.
Never use an acid based cleaning solution!
Many food products have an acidic content which
can deteriorate the finish. Be sure to clean the
stainless steel surfaces of ALL food products.
Common items include, tomatoes, peppers and
other vegetables.
Never use a high pressure water wash for this
cleaning procedure as water can damage the
electrical components located near or at the
condenser coil.
In order to maintain proper refrigeration performance, the
condenser fins must be cleaned of dust, dirt and grease regularly.
It is recommended that this be done at least every three months.
If conditions are such that the condenser is totally blocked in
three months, the frequency of cleaning should be increased.
Clean the condenser with a vacuum cleaner or stiff brush. If
extremely dirty, a commercially available condenser cleaner may
be required.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact Refrigerators and Freezers Service and Installation Manual
Maintenance continued
If your freezer seems to vibrate excessively when the Freezers: During the refrigeration cycle the timer supplies
compressor is running, loosen (but do not remove) the
bolts on the compressor. Semi hermetic models should be
loosened before operating.
power to the temperature control (for power to the condensing
unit) and evaporator fan motors. The evaporator fans will run
at any time when the compressor is running, they will also
cycle off during door openings and during a defrost period.
The door switch will activate the lights when opened and turn
power off to the evaporator fan motors.
BASIC MAINTENANCE
Gasket Maintenance
Gaskets require regular cleaning to prevent mold and mildew
build up and also to keep the elasticity of the gasket. Gasket
cleaning can be done with the use of warm soapy water. Avoid
full strength cleaning products on gaskets as this can cause
them to become brittle and prevent proper seals. Also, never
use sharp tools or knives to scrape or clean the gasket which
could possibly tear the gasket and rip the bellows.
See Defrost Cycle
Gaskets can easily be replaced and do not require the use of
tools or authorized service persons. The gaskets are “Dart”
style and can be pulled out of the grove in the door and new
gaskets can be “pressed” back into place.
Doors/Hinges
Over time and with heavy use doors the hinges may become
loose. If it is noticed that the door is beginning to sag, it may
become necessary to tighten the screws that mount the hinge
brackets to the frame of the unit. If the doors are loose or
sagging this can cause the hinge to pull out of the frame which
may damage both the doors and the door hinges. In some
cases this can require qualified service agents or maintenance
personnel.
Drain Maintenance
Each unit has a drain located inside the unit which removes the
condensation from the evaporator coil and evaporates it at an
external condensate evaporator pan. Each drain can become
loose or disconnected from moving or bumping the drain. If
you notice excessive water accumulation on the inside of the
unit be sure the drain tube is connected from the evaporator
housing to the condensate evaporator drain pan. If water
is collected underneath the unit you may want to check the
condensate evaporator drain tube to be sure it is still located
inside the drain pan. The leveling of the unit is important as the
units are designed to drain properly when on a level surface,
if your floor is not level this can also cause drain problems.
Be sure all drain lines are free of obstructions, typically food
product is found blocking drain lines causing water to back up
and overflow the drain pans.
Refrigeration cycle
Refrigerators: During the refrigeration cycle the evaporator
fans will run continuously with the exception of door openings.
The door switch will activate the lights when opened and turn
power off to the evaporator fan motors.
The temperature control allows for the evaporator coil to clear
after each off cycle and before the compressor runs again.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact Refrigerators and Freezers Service and Installation Manual
Wiring Diagram Refrigerators
115V/60Hz/1Ø
NEMA 5-15P
L1
G
N
Supply Cord &
Plug Furnished
Black
White
Evaporator Fan
Temperature
Control
Condensing
Unit
Wiring Diagram Freezers
MCCF27 & MCCSTF27
MCCF48 & MCCSTF48
115V/60Hz/1Ø
NEMA 5-15P
Supply Cord &
Plug Furnished
115V/60Hz/1Ø
NEMA 5-15P
Supply Cord &
Plug Furnished
L1
G
N
L1
G
N
Black
White
Black
White
Mullion Heater
(4148 Only)
Defrost Limit
Defrost Limit
Defrost Heater
Evaporator Fan
Defrost Heater
Evaporator Fan
Defrost
Timer
Defrost
Timer
Condensing
Unit
Condensing
Unit
Temperature
Control
Temperature
Control
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact Refrigerators and Freezers Service and Installation Manual
Replacement Parts List
MCCSTR27/MCCR27
MCCSTF27/MCCF27
Part #
Description
Part #
Description
3234025
3234024
3234160
3234161
3234791
3” Caster, brake
3” Caster, no brake
5” Caster, no brake
5” Caster, brake
6” Leg
3234025
3234024
3234160
3234161
3234791
3” Caster, brake
3” Caster, no brake
5” Caster, no brake
5” Caster, brake
6” Leg
000-B3I-0031 27” Door, left hand
000-B3I-0030 27” Door, right hand
000-B3I-0031 27” Door, left hand
000-B3I-0030 27” Door, right hand
0074057
3526997
3516446
2194787
0053452
0330154
3516275
3516172
2162691
1702623
3516116
3516172
2162691
3516321
3237569
3237563
3237516
3237568
3237562
0420067
3978030
5189779
2194759KT
Capillary tube (.044 id x 144”)
Compressor
Compressor relay
Compressor start capacitor
Condensate evap heater only
Cond evap pan assy with heater
Condenser coil
Condenser fan blade, clear lexan
Condenser fan motor
Door gasket
0074058
3526996
3516446
2194787
Capillary tube (.036 id x 168”)
Compressor
Compressor relay
Compressor start capacitor
158-B4Z-0034 Condensate evap heater only
0330154T
3516275
3516172
3516173
2162715
2194744
3516156
1702623
3516418
3516172
3516173
2162691
3516321
3978055
0420067
3978030
5189779
3516043
Cond evap pan assy with heater
Condenser coil
Condenser fan blade, clear lexan
Condenser fan guard
Condenser fan motor
Defrost heater
Defrost timer
Door gasket
Evaporator Coil
Evaporator fan blade, clear lexan
Evaporator fan guard
Evaporator fan motor
Filter Drier
Heater guard, 18”
Hinge kit (left or right hinged)
Shelf
Evaporator coil
Evaporator fan blade, clear lexan
Evaporator fan motor
Filter drier
Hinge, Btm LT, McDonalds
Hinge, Btm RT, McDonalds
Hinge, Cartridge, McDonalds
Hinge, Top LT, McDonalds
Hinge, Top RT, McDonalds
Hinge kit (left or right hinged)
Shelf
Shelf clip
Temperature control
Shelf clip
Temperature control
(Includes control, knob, and dial plate)
Temperature control knob
2194761
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact Refrigerators and Freezers Service and Installation Manual
Replacement Parts List continued
MCCSTR48/MCCR48
MCCSTF48/MCCF48
Part #
Description
Part #
Description
3” Caster, brake
3” Caster, no brake
5” Caster, no brake
5” Caster, brake
3234025
3234024
3234160
3234161
3234791
3” Caster, brake
3” Caster, no brake
5” Caster, no brake
5” Caster, brake
6” Leg
3234025
3234024
3234160
3234161
000-B3I-0035 24” Door, left hand
000-B3I-0034 24” Door, right hand
3234791
0074058
3527000
000-B3I-0035 24” Door, left hand
000-B3I-0034 24” Door, right hand
6” Leg
0074057
3526997
3516446
2194787
0053452
0330154
3516275
3516172
3516173
2162691
1702622
3516116
3516172
3516173
2162691
3516321
0420067
3978033
2194759KT
Capillary tube (.044 id x 144”)
Compressor
Compressor relay
Capillary tube (.036 id x 168”)
Compressor
158-B4Z-0034 Condensate evap heater only
Compressor start capacitor
Condensate evap heater only
Cond evap pan assy with heater
Condenser coil
Condenser fan blade, clear lexan
Condenser fan guard
Condenser fan motor
Door gasket
0330154T
3516276
3516172
2162715
2194774
3516156
1702622
3516418
3517356
3516173
2162715
3516321
3978055
0420067
3978033
3516044
Cond evap pan assy with heater
Condenser coil
Condenser fan blade, clear lexan
Condenser fan motor
Defrost heater
Defrost timer
Door gasket
Evaporator coil
Evaporator coil
Evaporator fan blade, black
Evaporator fan guard
Evaporator fan motor
Filter drier
Heater guard, 18”
Hinge kit (left or right hinged)
Shelf
Evaporator fan blade, clear lexan
Evaporator fan guard
Evaporator fan motor
Filter drier
Hinge kit (left or right hinged)
Shelf
Temperature control
(Includes control, knob and dial plate)
Temperature control knob
Thermostat, Mechanical, Freezer
2194761
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact Refrigerators and Freezers Service and Installation Manual
Standard Labor Guidelines To Repair Or Replace Parts On McCall Equipment
Advice and recommendations given by McCall Service Technicians do not constitute or guarantee any special coverage.
• A maximum of 1-hour is allowed to diagnose a defective component.
• A maximum of 1-hour is allowed for retrieval of parts not in stock.
• A maximum travel distance of 100 miles round trip and 2-hours will be reimbursed.
• Overtime, installation/start-up, normal control adjustments, general maintenance, glass breakage, freight damage, and/or
correcting and end-user installation error will not be reimbursed under warranty unless pre-approved with a Service Work
Authorization from McCall. You must submit the number with the service claim.
Labor Of 1-Hour Is Allowed To Replace:
• Thermostat
• Contractor/Relay
• Infinite Switch
• Door Jam Switch
• Solenoid Coil
• Hi-limit/Thermal Protector Switch
• Fan Delay/Defrost Termination Switch
• Compressor Start Components and Overload Protector
• Defrost Timer
• Transformer
• Evaporator/Condenser Fan Motor and Blade
• Circulating Fan Motor and Blade
• Microprocessor Control
• Water Level Sensor/Probe
• Door Hinges, Locks, and Gaskets
• Condensate Element
• Thermometer
• Springs/Lowerator
• Gear Box
Labor Of 2 Hours To Replace:
• Drawer Tracks/Cartridges
• Pressure Control
• Defrost Element
• Heating Element
• Locate/Repair Leak
• Solenoid Valve
Labor Of 3 Hours To Replace:
• EPR or CPR Valve
• Condenser or Evaporator Coil
• Expansion Valve
Labor Of 4 Hours To Replace:
• Compressor
This includes recovery of refrigerant and leak check.
$55.00 maximum reimbursement for refrigerant recovery (includes recovery machine, pump, torch, oil, flux, minor fittings,
solder, brazing rod, nitrogen, or similar fees.)
Refrigerants:
• R22 A maximum of $4.00/lb. or 25¢/oz. will be reimbursed.
• R134A A maximum of $5.00/lb. or 31¢/oz. will be reimbursed.
• R404A A maximum of $15.00/lb. or $1.00/oz. will be reimbursed.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact Refrigerators and Freezers Service and Installation Manual
Manufacturers Limited Lifetime Warranty
McCall warrants to the original purchaser-user, subject to the Exclusions
limitations and exclusions set forth below, that the ABS interior of the This warranty does not cover labor, service, charges for travel time,
McCall models identified above will be free of manufactured defects mileage, or premium charges. This warranty also does not include
for as long as the equipment is owned by the original purchaser-user defects resulting from:
and is in operation.
• Operation of the product beyond the specification set forth in the
Service and Installation Manual.
What is covered.
The interior liner is covered against manufactured defects under
• Failure to clean and maintain the product as described in the Service
and Installation Manual.
normal use. For purposes of this Warranty, interior liner is defined • Installation of the product in a manner other than as set forth in the
as the portion of the interior liner which is made of ABS material. Service and Installation.
This warranty applies only to products sold and installed after March • Use of installation of replacement parts not approved by McCall; or
1, 2000 in the United States, Canada, Puerto Rico, and Mexico. For • The introduction hot items directly onto the ABS liner.
purposes of this warranty, lifetime is defined as the expected usable
life for the equipment of 12 years.
This warranty is in lieu of all other warranties or guarantees of any
kind, express or implied, except McCall’s One Year Parts and Labor
Warranty. ANY IMPLIED WARRANTIES OR MERCHANTABILITY OR
McCall’s Obligation
Limited strictly to shipping OEM replacement parts or repair kits for any FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED
covered ABS interior. A McCall authorized service dealer and McCall’s AND EXCLUDED. IN NO EVENT SHALL McCall BE LIABLE FOR
Service Department must confirm the liner defect has occurred under INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR
normal conditions and is not due to misuse as defined below. All NATURE, OR FOR ANY DEFECT RESULTING IN WHOLE OR IN
decisions regarding the ABS interior shall be made by McCall’s Service PART FROM MISUSE, ALTERATION, IMPROPER INSTALLATION
Department and shall be binding upon the parties. No labor or service OR INADEQUATE MAINTENANCE OF THE PRODUCT OR ANY PART
charges or allowances are covered by this warranty. Warranty service THEREOF.
must be performed by a McCall approved authorized service agent.
No part or assembly which has been subject to accident, alteration or
User Responsibility
misuse, or which has not been installed or serviced in accordance with
The product must be installed, cleaned and maintained as described the Operation Manual furnished with the product, or which is from
in the Service and Installation manual which is furnished with the equipment on which the serial number has been altered or removed,
product. Only approved replacement parts may be used. Failure shall be covered by this warranty.
to adhere to the requirements of this paragraph may void warranty
coverage.
Procedures
All claims for replacement parts or repair kits must be made through
a McCall Parts Depot or an authorized McCall dealer. The defective
part invoice must be returned to McCall within 15 days after the date
of service to be eligible for warranty coverage. All claims must include
the model number, serial number, an original date of installation and
customer identification. Use of parts other than original McCall
replacement parts will not be covered.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact Refrigerators and Freezers Service and Installation Manual
Standard One Year Warranty
(One year parts and labor.)
McCall warrants to the Original Purchaser of the McCall product (herein being issued after the part has been received and inspected at McCall’s
called the “Unit”) that such Unit, and all parts thereof, will be free from plant and determined by McCall to be within this warranty.
defects in material and workmanship under normal use and service for
a period of one (1) year from the date of shipment of the Unit to the Under no condition does this warranty give the Original Purchaser
Original Purchaser or, if the Original Purchaser returns the warranty the right to replace the defective Unit with a complete Unit of the
card completely filled out including the date of installation within same manufacturer or of another make. Unless authorized by McCall
thirty (30) days of receipt of the Unit, one (1) year from the date of in writing, this warranty does not permit the replacement of any part,
installation. During this one year warranty period, McCall will repair including the motor-compressor, to be made with the part of another
or replace any defective part or portion there of returned to McCall by make or manufacturer.
the Original Purchaser which McCall determines was defective due to
faulty material or workmanship. During this one year warranty period, No claims can be made under this warranty for spoilage of any products
McCall will pay labor, crating and freight incurred in the removal of the for any reason, including system failure.
Unit or defective component and shipment to McCall. Reimbursement is
subject to the following limitations: A maximum of 1-hour is allowed to The installation contractor shall be responsible for building access,
diagnose a defective component; A maximum of 1-hour is allowed for entrance and field conditions to insure sufficient clearance to allow any
retrieval of parts not in stock; A maximum travel distance of 100 miles hood(s), vent(s), or Unit(s) if necessary, to be brought into the building.
round trip and 2-hours will be reimbursed. Overtime, installation/start- McCall will not be responsible for structural changes or damages incurred
up, normal control adjustments, general maintenance, glass breakage, during installation of the Unit or any exhaust system.
freight damage, and/or correcting an end-user installation error will not
be reimbursed under warranty unless pre-approved with a Service Work McCall shall not be liable in any manner for any default or delay in
Authorization from McCall. McCall will pay the return costs if the Unit or performance hereunder caused by or resulting from any contingency
part thereof was defective.
beyond McCall’s control, including, but not limited to, war, governmental
restrictions or restraints, strike, lockouts, injunctions, fire, flood, acts of
The term “Original Purchaser” as used herein means that person, firm, nature, short or reduced supply of raw materials, or discontinuance of
association, or corporation for whom the Unit was originally installed.
the parts by the original part manufacturer.
This warranty does not apply to any Unit or part thereof that has been Except as provided in any Additional Four Year Protection Plan, if
subjected to misuse, neglect, alteration, or accident, such as accidental applicable, and the Service Labor Contract, if applicable, the foregoing
damage to the exterior finish, operated contrary to the recommendations is exclusive and in lieu of all other warranties, whether written or
specified by McCall; or repaired or altered by anyone other than McCall oral, express or implied. This warranty supersedes and excludes any
in any way so as to, in McCall’s sole judgement, affect its quality or prior oral or written representations or warranties. McCall expressly
efficiency. This warranty does not apply to any Unit that has been moved disclaims any implied warranties of merchantability, fitness for a
from the location where it was originally installed. This warranty also particularpurposeorcompliancewithanylaw,treaty,ruleorregulation
does not cover the refrigerator drier or the light bulbs used in the Unit. relating to the discharge of substances into the environment. The sole
The warranty is subject to the user’s normal maintenance and care and exclusive remedies of any person relating to the Unit, and the full
responsibility as set forth in the Service and Installation Manual, such liability of McCall for any breach of this warranty, will be as provided
as cleaning the condenser coil, and is in lieu of all other obligations in this warranty.
of McCall. McCall neither assumes, nor authorizes any other person
to assume for McCall, any other liability in connection with McCall’s OtherthanthisMcCallStandardOneYearLimitedWarranty,anyapplicable
products.
McCall Additional Four Year Protection Plan or applicable McCall Service
Labor Contract, the Original Purchaser agrees and acknowledges that no
Removal or defacement of the original Serial Number or Model Number other warranties are offered or provided in connection with or for the Unit
from any Unit shall be deemed to release McCall from all obligations or any other part thereof.
hereunder or any other obligations, express or implied.
In no event will McCall be liable for special, incidental or consequential
Parts furnished by suppliers to McCall are guaranteed by McCall only damages, or for damages in the nature of penalties.
to the extent of the original manufacturer’s express warranty to McCall.
Failure of the Original Purchaser to receive such manufacturers warranty IF DURING THE WARRANTY PERIOD, CUSTOMER USES A PART FOR
shall in no way create any warranty, expressed or implied, or any other THIS McCall EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR
obligation or liability on McCall’s part in respect thereof.
RECYCLED PART PURCHASED DIRECTLY FROM McCall OR ANY OF
ITS AUTHORIZED SERVICE CENTERS AND/OR THE PART BEING USED
IF THE CUSTOMER IS USING A PART THAT RESULTS IN A VOIDED IS MODIFIED FROM ITS ORIGINAL CONFIGURATION, THIS WARRANTY
WARRANTY AND A McCall AUTHORIZED REPRESENTATIVE TRAVELS WILL BE VOID. FURTHER, McCall AND ITS AFFILIATES WILL NOT BE
TO THE INSTALLATION ADDRESS TO PERFORM WARRANTY LIABLE FOR ANY CLAIMS DAMAGES OR EXPENSES INCURRED BY THE
SERVICE, THE SERVICE REPRESENTATIVE WILL ADVISE CUSTOMER CUSTOMER WHICH ARISE DIRECTLY OR INDIRECTLY, IN WHOLE OR
THE WARRANTY IS VOID. SUCH SERVICE CALLS WILL BE BILLED IN PART, DUE TO THE INSTALLATION OF ANY MODIFIED PART AND/
TO CUSTOMER AT THE AUTHORIZED SERVICE CENTER’S THEN OR PART RECEIVED FROM AN UNAUTHORIZED SERVICE CENTER. If
APPLICABLE TIME AND MATERIALS RATES. CONSIDER: CUSTOMER the warranty becomes void, Customer may purchase from McCall, if
MAY INITIATE A SERVICE AGREEMENT WITHOUT PARTS COVERAGE.
available, a Service Agreement or service at the then current time and
materials rate.
If shipment of a replacement part is requested prior to the arrival in the
McCall factory of the part claimed to be defective, the Original Purchaser For more information on McCall warranty’s log on and check out the
must accept delivery of the replacement part on a C.O.D. basis, with credit service section of our web site at www.mccallrefrigeration.com.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for choosing McCall!
Help is a phone call away. Help our team of professional, courteous
customer service reps by having your model number and serial number
available at the time of your call (888) 732-2446.
Model: ____________________ S/N: ___________________
Installation Date: ____________
For a list of McCall’s authorized parts depots,
980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (888) 732-2446 • Fax (800) 669-0619 • www.mccallrefrigeration.com
McCall reserves the right to make changes in design or specifications without prior notice. ©2010 McCall. All rights reserved. Printed in the U.S.A.
DMMCWorkTables 06/10
9294370
Download from Www.Somanuals.com. All Manuals Search And Download.
|