Download from Www.Somanuals.com. All Manuals Search And Download.
Mazdaspeed6_8V77-EA-06F_Edition1 Page1
Tuesday, May 9 2006 10:43 AM
Black plate (1,1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page2
Tuesday, May 9 2006 10:43 AM
Black plate (2,1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page3
Tuesday, May 9 2006 10:43 AM
Black plate (3,1)
AWord to Mazda Owners
Thank you for choosing a Mazda. We at Mazda design and build vehicles with complete
customer satisfaction in mind.
To help ensure enjoyable and trouble-free operation of your Mazda, read this manual
carefully and follow its recommendations.
An Authorized Mazda Dealer knows your vehicle best. So when maintenance or service is
necessary, that's the place to go.
Our nationwide network of Mazda professionals is dedicated to providing you with the best
possible service.
We assure you that all of us at Mazda have an ongoing interest in your motoring pleasure
and in your full satisfaction with your Mazda product.
Mazda Motor Corporation
HIROSHIMA, JAPAN
Important Notes About This Manual
Keep this manual in the glove box as a handy reference for the safe and enjoyable use of your Mazda. Should you
resell the vehicle, leave this manual with it for the next owner.
All specifications and descriptions are accurate at the time of printing. Because improvement is a constant goal at
Mazda, we reserve the right to make changes in specifications at any time without notice and without obligation.
Event Data Recorder
This vehicle is equipped with an event data recorder. In the event of a crash, this device records data related to
vehicle dynamics and safety systems for a short period of time. These data can help provide a better
understanding of the circumstances in which crashes and injuries occur and lead to the designing of safer
vehicles.
Air Conditioning and the Environment
Your Mazda's genuine air conditioner is filled with HFC134a (R134a), a refrigerant that has been found not to
damage the earth's ozone layer. If the air conditioner does not operate properly, consult an Authorized Mazda
Dealer.
Please be aware that this manual applies to all models, equipment and options. As a result, you may find
some explanations for equipment not installed on your vehicle.
©2006 Mazda Motor Corporation
Printed in Japan June 2006(Print1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page4
Tuesday, May 9 2006 10:43 AM
Black plate (4,1)
How to Use This Manual
We want to help you get the most driving
pleasure from your vehicle. Your owner's
manual, when read from cover to cover,
can do that in many ways.
NOTE
A NOTE provides information and
sometimes suggests how to make better
use of your vehicle.
Illustrations complement the words of the
manual to best explain how to enjoy your
Mazda. By reading your manual, you can
find out about the features, important
safety information, and driving under
various road conditions.
The symbol below, located on some parts
of the vehicle, indicates that this manual
contains information related to the part.
Please refer to the manual for a detailed
explanation.
The symbol below in this manual means
“Do not do this” or “Do not let this
happen”.
Index: A good place to start is the Index,
an alphabetical listing of all information
in your manual.
You'll find several WARNINGs,
CAUTIONs, and NOTEs in the manual.
WARNING
A WARNING indicates a situation in
which serious injury or death could
result if the warning is ignored.
CAUTION
A CAUTION indicates a situation in
which bodily injury or damage to your
vehicle, or both, could result if the
caution is ignored.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page5
Tuesday, May 9 2006 10:43 AM
Black plate (5,1)
Table of Contents
Interior, exterior views and part identification of your Mazda.
Use of safety equipment, including seats, seat belt system, child-restraint
systems and SRS air bags.
Explanation of basic operations and controls; opening/closing and adjustment
of various parts.
Important information about driving your Mazda.
Explanation of instruments and controls.
Use of various features for drive comfort, including air-conditioning and audio
system.
Helpful information on what to do in an emergency.
How to keep your Mazda in top condition.
Important consumer information including warranties and add-on equipment.
Technical information about your Mazda.
Navigation System
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page6
Tuesday, May 9 2006 10:43 AM
Black plate (6,1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page8
Tuesday, May 9 2006 10:43 AM
Black plate (8,1)
Your Vehicle at a Glance
Dashboard and Interior Overview
The equipment and installation position varies by vehicle.
Refer to Navigation System at the end of the manual (if equipped).
1-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page9
Tuesday, May 9 2006 10:43 AM
Black plate (9,1)
Your Vehicle at a Glance
Dashboard and Interior Overview
MT shift lever ...................................................................................................... page 5-9
Vanity mirror ...................................................................................................... page 6-40
1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page10
Tuesday, May 9 2006 10:43 AM
Black plate (10,1)
Your Vehicle at a Glance
Exterior Overview
The equipment and installation position varies by vehicle.
Refer to Navigation System at the end of the manual (if equipped).
1-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page11
Tuesday, May 9 2006 10:43 AM
Black plate (11,1)
Your Vehicle at a Glance
Exterior Overview
1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page12
Tuesday, May 9 2006 10:43 AM
Black plate (12,1)
1-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page13
Tuesday, May 9 2006 10:43 AM
Black plate (13,1)
Essential Safety Equipment
2
Use of safety equipment, including seats, seat belt system, child-restraint
systems and SRS air bags.
Seats ............................................................................................... 2-2
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page14
Tuesday, May 9 2006 10:43 AM
Black plate (14,1)
Essential Safety Equipment
Seats
Front Seats (Manually
Operated Seats)
WARNING
Make sure the adjustable components
of a seat are locked in place:
WARNING
Adjustable seats and seatbacks that
are not securely locked are dangerous.
In a sudden stop or collision, the seat
or seatback could move, causing
injury. Make sure the adjustable
components of the seat are locked in
place by attempting to slide the seat
forward and backward and rocking
the seatback.
Do not modify or replace the front
seats:
Modifying or replacing the front seats
such as replacing the upholstery or
loosening any bolts is dangerous. The
front seats contain air bag
components essential to the
supplemental restraint system. Such
modifications could damage the
supplemental restraint system and
result in serious injury. Consult an
Authorized Mazda Dealer if there is
any need to remove or reinstall the
front seats.
qSeat Slide
WARNING
Adjust the driver seat only when the
vehicle is stopped:
Adjusting the driver's seat while the
vehicle is moving is dangerous. The
driver could lose control of the vehicle
and have an accident.
Do not drive with damaged front seats:
Driving with damaged front seats is
dangerous. A collision, even one not
strong enough to inflate the air bags,
could damage the front seats which
contain essential air bag components.
If there was a subsequent collision, an
air bag may not deploy which could
lead to injuries. Always have an
Authorized Mazda Dealer inspect the
front seats, front seat belt
To move a seat forward or backward, raise
the lever and slide the seat to the desired
position and release the lever.
pretensioners and air bags after a
collision.
2-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page15
Tuesday, May 9 2006 10:43 AM
Black plate (15,1)
Essential Safety Equipment
Seats
Make sure the lever returns to its original
position and the seat is locked in place by
attempting to push it forward and
backward.
WARNING
Do not drive with the seatback
unlocked:
The seatback plays an important role
in your protection in a vehicle.
Leaving the seatback unlocked is
dangerous as it can allow passengers
to be ejected or thrown around and
baggage to strike occupants in a
sudden stop or collision, resulting in
severe injury. After adjusting the
seatback at any time, even when there
are no other passengers, rock the
seatback to make sure it is locked in
place.
qSeat Recline
WARNING
Do not drive with the seats reclined:
Sitting in a reclined position while the
vehicle is moving is dangerous
because you don't get the full
protection from seat belts. During
sudden braking or a collision, you can
slide under the lap belt and suffer
serious internal injuries. For
maximum protection, sit well back and
upright.
To change the seatback angle, lean
forward slightly while raising the lever.
Then lean back to the desired position and
release the lever.
Always sit in a passenger seat properly
with the seatback upright and feet on
the floor:
If your vehicle is equipped with front
passenger seat weight sensors, sitting
in the front passenger seat improperly
out of position or with the seatback
reclined too far while the vehicle is
moving is dangerous as it can take off
weight from the seat bottom and affect
the weight determination of the front
passenger sensing system. As a result
the front passenger will not have the
supplementary protection of the air
bag and seat belt pretensioner, which
could cause result in serious injury.
Always sit upright against your
Make sure the lever returns to its original
position and the seatback is locked in
place by attempting to push it forward and
backward.
seatback, with your feet on the floor.
2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page16
Tuesday, May 9 2006 10:43 AM
Black plate (16,1)
Essential Safety Equipment
Seats
qHead Restraint
CAUTION
When returning a rear-reclined seatback
to its upright position, make sure you
hold onto the seatback with your other
hand while operating the lever. If the
seatback is not supported, it will flip
forward suddenly and could cause
injury.
WARNING
Always drive with the head restraints
installed when seats are being used
and make sure they are properly
adjusted:
Driving with the head restraints
adjusted too low or removed is
dangerous. With no support behind
your head, your neck could be
seriously injured in a collision.
q
Height Adjustment (Driver's Seat)
By moving the seat lever up or down, the
seat bottom height can be adjusted.
Height adjustment
Up
To raise a head restraint, pull it up to the
desired position.
To lower the head restraint, press the stop-
catch release, then push the head restraint
down.
Down
qLumbar Support Adjustment
(Driver's Seat)
To adjust the lumbar support, pull the
lever forward.
Adjust the head restraint so that the top is
even with the top of the passenger's ears,
never the passenger's neck.
2-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page17
Tuesday, May 9 2006 10:43 AM
Black plate (17,1)
Essential Safety Equipment
Seats
qSeat Warmerí
Front Seats (Electrically
Operated Seats)
The front seats are electrically heated. The
ignition switch must be in the ON
position.
WARNING
Press the switch to turn the seat warmer
on or off. When the switch is in the ON
position, the indicator light will come on.
Do not modify or replace the front
seats:
Modifying or replacing the front seats
such as replacing the upholstery or
loosening any bolts is dangerous. The
front seats contain air bag
components essential to the
supplemental restraint system. Such
modifications could damage the
supplemental restraint system and
result in serious injury. Consult an
Authorized Mazda Dealer if there is
any need to remove or reinstall the
front seats.
ON
OFF
NOTE
Do not drive with damaged front seats:
Driving with damaged front seats is
dangerous. A collision, even one not
strong enough to inflate the air bags,
could damage the front seats which
contain essential air bag components.
If there was a subsequent collision, an
air bag may not deploy which could
lead to injuries. Always have an
Authorized Mazda Dealer inspect the
front seats, front seat belt
The seat temperature is regulated
automatically by a thermostat. Other
than turning it on or off, it cannot be
adjusted.
pretensioners and air bags after a
collision.
íSome models.
2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page18
Tuesday, May 9 2006 10:43 AM
Black plate (18,1)
Essential Safety Equipment
Seats
qSeat Recline
CAUTION
l
The seat-bottom power adjustment is
WARNING
operated by motors. Avoid extended
operation because excessive use can
damage the motors.
Do not drive with the seats reclined:
Sitting in a reclined position while the
vehicle is moving is dangerous
because you don't get the full
protection from seat belts. During
sudden braking or a collision, you can
slide under the lap belt and suffer
serious internal injuries. For
maximum protection, sit well back and
upright.
l
To prevent the battery from running
down, avoid using the power
adjustment when the engine is
stopped. The adjuster uses a large
amount of electrical power.
l
Don't use the switch to make more
than one adjustment at a time.
qSeat Slide
Always sit in a front passenger seat
properly with the seatback upright and
feet on the floor:
To slide the seat, move the slide lifter
switch on the outside of the seat to the
front or back and hold it. Release the
switch at the desired position.
If your vehicle is equipped with front
passenger seat weight sensors, sitting
in the front passenger seat improperly
out of position or with the seatback
reclined too far while the vehicle is
moving is dangerous as it can take off
weight from the seat bottom and affect
the weight determination of the front
passenger sensing system. As a result
the front passenger will not have the
supplementary protection of the air
bag and seat belt pretensioner, which
could cause result in serious injury.
Always sit upright against your
seatback, with your feet on the floor.
2-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page19
Tuesday, May 9 2006 10:43 AM
Black plate (19,1)
Essential Safety Equipment
Seats
Change the seatback angle by pressing the
front or rear side of the reclining switch.
Release the switch at the desired position.
Rear of seat bottom
Raise or lower the back of the switch to
adjust the rear height of the seat bottom.
Whole seat
qHeight Adjustment
Raise the seat by pulling up on the center
of the switch. Release the switch at the
desired position.
Front of seat bottom
To adjust the front height of the seat
bottom, raise or lower the front of the
slide lifter switch on the left side of the
seat.
Lower the seat by pressing down on the
center of the switch. Release the switch at
the desired position.
2-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page20
Tuesday, May 9 2006 10:43 AM
Black plate (20,1)
Essential Safety Equipment
Seats
Height adjustment
qLumbar Support Adjustment
To raise a head restraint, pull it up to the
desired position.
To lower the head restraint, press the stop-
catch release, then push the head restraint
down.
To adjust the lumbar support, pull the
lever forward.
qHead Restraint
Adjust the head restraint so that the top is
even with the top of the passenger's ears,
never the passenger's neck.
WARNING
Always drive with the head restraints
installed when seats are being used
and make sure they are properly
adjusted:
Driving with the head restraints
adjusted too low or removed is
dangerous. With no support behind
your head, your neck could be
seriously injured in a collision.
qSeat Warmerí
The front seats are electrically heated. The
ignition switch must be in the ON
position.
Press the switch to turn the seat warmer
on or off. When the switch is in the ON
position, the indicator light will come on.
ON
OFF
2-8
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page21
Tuesday, May 9 2006 10:43 AM
Black plate (21,1)
Essential Safety Equipment
Seats
NOTE
Rear Seat
The seat temperature is regulated
automatically by a thermostat. Other
than turning it on or off, it cannot be
adjusted.
WARNING
Make sure luggage and cargo is
secured before driving:
Not securing cargo while driving is
dangerous as it could move or be
crushed during sudden braking or a
collision and cause injury.
qHead Restraint
WARNING
Always drive with the head restraints
installed when seats are being used
and make sure they are properly
adjusted:
Driving with the head restraints
adjusted too low or removed is
dangerous. With no support behind
your head, your neck could be
seriously injured in a collision.
2-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page22
Tuesday, May 9 2006 10:43 AM
Black plate (22,1)
Essential Safety Equipment
Seats
Height adjustment
To raise a head restraint, pull it up to the
desired position.
To lower the head restraint, press the stop-
catch release, then push the head restraint
down.
Adjust the head restraint so that the top is
even with the top of the passenger's ears,
never the passenger's neck.
qArmrest
The rear armrest in the center of the rear
seatback can be used (no occupant in the
center seat) or placed upright, pull on the
small fabric pull-tab to lower the armrest.
2-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page23
Tuesday, May 9 2006 10:43 AM
Black plate (23,1)
Essential Safety Equipment
Seat Belt Systems
Seat Belt Precautions
Seat belts help to decrease the possibility of severe injury during accidents and sudden
stops. Mazda recommends that the driver and all passengers always wear seat belts.
All of the seat belt retractors are designed to keep the lap/shoulder belts out of the way
when not in use.
The driver's seat belt has no provisions for child-restraint systems and has only an
emergency locking mode. The driver may wear it comfortably, and it will lock during a
collision.
However, the front passenger's seat and all rear lap/shoulder belt retractors operate in two
modes: emergency locking mode, and for child-restraint systems, automatic locking mode.
While we recommend you put all children in the rear seats, if you must use the front
passenger seat for a child, slide the front passenger seat as far back as possible and make
sure any child-restraint system is secured properly.
WARNING
Always wear your seat belt and make sure all occupants are properly restrained:
Not wearing a seat belt is extremely dangerous. During a collision, occupants not
wearing seat belts could hit someone or things inside the vehicle or even be thrown out
of the vehicle. They could be seriously injured or even killed. In the same collision,
occupants wearing seat belts would be much safer.
Do not wear twisted seat belts:
Twisted seat belts are dangerous. In a collision, the full width of the belt is not
available to absorb the impact. This puts more force on the bones beneath the belt,
which could cause serious injury or death.
Never use one seat belt on more than one person at a time:
Using one seat belt for more than one person at a time is dangerous. A seat belt used
in this way cannot spread the impact forces properly and the two passengers could be
crushed together and seriously injured or even killed. Never use one belt for more
than one person at a time and always operate the vehicle with each occupant properly
restrained.
Do not operate a vehicle with a damaged seat belt:
Using a damaged seat belt is dangerous. An accident could damage the belt webbing
of the seat belt in use. A damaged seat belt cannot provide adequate protection in a
collision. Have an Authorized Mazda Dealer inspect all seat belt systems in use during
an accident before they are used again.
2-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page24
Tuesday, May 9 2006 10:43 AM
Black plate (24,1)
Essential Safety Equipment
Seat Belt Systems
WARNING
Have your seat belts changed immediately if the pretensioner or load limiter has been
expended:
One or both front air bags may deploy, and the corresponding pretensioner(s) may
also deploy at the same time. While it is safer to use a crash-used seat belt that was
used in an accident than no seat belt at all, using a seat belt with an expended
pretensioner or load limiter loaded reduces the safety available to you. Like the air
bags, the seat belt pretensioners will only function once. After they are expended, they
will not function again and must be replaced immediately. If the seat belt
pretensioners are not replaced, the risk of injury in a collision will increase. Always
have an Authorized Mazda Dealer inspect the seat belt pretensioners and air bags
after any collision. Expended seat belt pretensioners and air bags must be replaced
after any collision which caused them to deploy. Additionally, the load limiter will only
limit loads on the chest once in a collision and this is another reason to have the front
seat belts inspected.
CAUTION
Belt retraction may become difficult if the belts and rings are soiled, so try to keep them
clean. For more details about cleaning the seat belts, refer to “Cleaning the Lap/Shoulder
Ring
2-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page25
Tuesday, May 9 2006 10:43 AM
Black plate (25,1)
Essential Safety Equipment
Seat Belt Systems
qPregnant Women and Persons with Serious Medical Conditions
Pregnant women should always wear seat belts. Ask your doctor for specific
recommendations.
The lap belt should be worn SNUGLYAND AS LOWAS POSSIBLE OVER THE HIPS.
The shoulder belt should be worn across your shoulder properly, but never across the
stomach area.
Persons with serious medical conditions also should wear seat belts. Check with your
doctor for any special instructions regarding specific medical conditions.
qEmergency Locking Mode
In the emergency locking mode, the belt remains comfortable on the occupant and the
retractor will lock in position during a collision. When the seat belt is fastened, it will
always be in the emergency locking mode until it is switched to automatic locking mode by
pulling it all the way out to its full length. If the belt feels tight and hinders comfortable
movement while the vehicle is stopped or in motion, it may be in the automatic locking
mode because the belt has been pulled too far out. To return to the belt to the more
comfortable emergency locking mode, wait until the vehicle has stopped in a safe, level
area, retract the belt fully to convert it back to emergency locking mode and then extend it
around you again.
qAutomatic Locking Mode
Always use the automatic locking mode to keep the child-restraint system from shifting to
an unsafe position in the event of an accident. To enable seat belt automatic locking mode,
pull it all the way out and connect it as instructed on the child-restraint system. It will
retract down to the child-restraint system and stay locked on it. See the section on child
restraint (page 2-24).
2-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page26
Tuesday, May 9 2006 10:43 AM
Black plate (26,1)
Essential Safety Equipment
Seat Belt Systems
Seat Belt (Except Center-
Rear Position)
WARNING
Positioning the Shoulder Portion of
the Seat Belt:
NOTE
Improper positioning of the shoulder
portion of the seat belt is dangerous.
Always make sure the shoulder
portion of the seat belt is positioned
across your shoulder and near your
neck, but never under your arm, on
your neck, or on your upper arm.
When using the center-rear seat belt,
refer to “Center-Rear Position Seat
qFastening the Seat Belt
1. Grasp the tongue.
4. Position the lap belt as low as possible,
not on the abdominal area, then adjust
the shoulder belt so that it fits snugly
against your body.
2. Slowly pull out the lap/shoulder belt.
Belt
Tongue
Take up slack
Keep low on
hip bone
Too high
3. Insert the tongue into the buckle until
you hear a click.
WARNING
Tongue
Positioning the Lap Portion of the
Seat Belt:
The lap portion of the seat belt worn
too high is dangerous. In a collision,
this would concentrate the impact
force directly on the abdominal area,
causing serious injury. Wear the lap
portion of the belt snugly and as low
as possible.
Buckle
2-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page27
Tuesday, May 9 2006 10:43 AM
Black plate (27,1)
Essential Safety Equipment
Seat Belt Systems
qUnfastening the Seat Belt
qShoulder Belt Adjuster (Front
Seat Belts)
Depress the button on the buckle. If the
belt does not fully retract, pull it out and
check for kinks or twists. Then make sure
it remains untwisted as it retracts.
Adjust the height of the shoulder belt if
the seat belt touches your neck, or if it
crosses your arm instead of your shoulder.
To raise the shoulder belt adjuster, push
the adjuster up. To lower the shoulder belt
adjuster, pull the knob and slide it down.
Make sure the adjuster is locked.
Button
NOTE
If a belt does not fully retract, inspect it
for kinks and twists. If it is still not
retracting properly, have it inspected at
an Authorized Mazda Dealer.
WARNING
Positioning the Shoulder Portion of
the Seat Belt:
Improper positioning of the shoulder
portion of the seat belt is dangerous.
Always make sure the shoulder
portion of the seat belt is positioned
across your shoulder and near your
neck, but never under your arm, on
your neck, or on your upper arm.
2-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page28
Tuesday, May 9 2006 10:43 AM
Black plate (28,1)
Essential Safety Equipment
Seat Belt Systems
Front Seat Belt Pretensioner
and Load Limiting Systems
WARNING
Wear seat belts only as recommended
in this owner's manual:
Incorrect positioning of the driver and
front passenger seat belts is
dangerous. Without proper
positioning, the pretensioner and load
limiting systems cannot provide
adequate protection in an accident
and this could result in serious injury.
For more details about wearing seat
belts, refer to “Fastening the seat
For optimum protection, the driver and
front passenger seat belts are equipped
with pretensioner and load limiting
systems. For both these systems to work
properly you must wear the seat belt
properly.
Pretensioners:
In moderate or severe frontal or near-
frontal accidents, the front air bag and
pretensioner systems deploy
simultaneously when the seat belt is worn.
If the front seat occupant is not wearing a
seat belt, that person's pretensioner will
not fire even if the air bag does. The front
seat belt retractors remove slack quickly
as the air bags are expanding.
In addition, the pretensioner system for
the front passenger, like the front
passenger air bag, is designed to only
deploy in accordance with the total seated
weight on the front passenger seat. Any
time the air bags and seat belt
pretensioners have fired they must be
replaced. For details, refer to the front
passenger seat weight sensors (page 2-48).
Load limiter:
The load limiting system releases belt
webbing in a controlled manner to reduce
belt force on the occupant's chest. While
the most severe load on a seat belt occurs
in frontal collisions, the load limiter has
an automatic mechanical function and can
activate in any accident mode with
sufficient occupant movement.
Even if the pretensioners have not fired,
the load limiting function must be
checked by an Authorized Mazda Dealer.
2-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page29
Tuesday, May 9 2006 10:43 AM
Black plate (29,1)
Essential Safety Equipment
Seat Belt Systems
WARNING
WARNING
Have your seat belts changed
immediately if the pretensioner or load
limiter has been expended:
Properly dispose of the pretensioner
system:
Improper disposal of the pretensioner
system or a vehicle with non-
deactivated pretensioners is
dangerous. Unless all safety
procedures are followed, injury could
result. Ask an Authorized Mazda
Dealer how to safely dispose of the
pretensioner system or how to scrap a
pretensioner-equipped vehicle.
One or both front air bags may deploy,
and the corresponding pretensioner(s)
may also deploy at the same time.
While it is safer to use a crash-used
seat belt that was used in an accident
than no seat belt at all, using a seat
belt with an expended pretensioner or
load limiter loaded reduces the safety
available to you. Like the air bags, the
seat belt pretensioners will only
NOTE
function once. After they are
expended, they will not function again
and must be replaced immediately. If
the seat belt pretensioners are not
replaced, the risk of injury in a
l
The pretensioner system will activate
in a moderate or greater frontal or
near-frontal collision. The
pretensioner system for the front
passenger is designed to only deploy
in accordance with the total seated
weight on the front passenger seat. It
will not activate in most rollovers,
side or rear impacts.
collision will increase. Always have an
Authorized Mazda Dealer inspect the
seat belt pretensioners and air bags
after any collision. Expended seat belt
pretensioners and air bags must be
replaced after any collision which
caused them to deploy. Additionally,
the load limiter will only limit loads on
the chest once in a collision and this is
another reason to have the front seat
belts inspected.
l
Some smoke (non-toxic gas) will be
released when the air bags and
pretensioners deploy. This does not
indicate a fire. This gas normally has
no effect on occupants, however,
those with sensitive skin may
experience light skin irritation. If
residue from the deployment of the
air bags or the front pretensioner
system gets on the skin or in the
eyes, wash it off as soon as possible.
Do not modify the components or
wiring, or use electronic testing
devices on the pretensioner system:
Modifying the components or wiring
of the pretensioner system, including
the use of electronic testing devices is
dangerous. You could accidentally
activate it or make it inoperable which
would prevent it from activating in an
accident. The occupants or repairers
could be seriously injured.
2-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page30
Tuesday, May 9 2006 10:43 AM
Black plate (30,1)
Essential Safety Equipment
Seat Belt Systems
q
Air Bag/Front Seat Belt Pretensioner
Systems Warning Light
Center-Rear Position Seat
Belt
Before using the center-rear lap/shoulder
belt make sure tongue (A) and anchor
buckle (B) are fastened.
(A)
(B)
If the air bag/front seat belt pretensioner
system is working properly, the warning
light illuminates when the ignition switch
is turned to the ON position or after the
engine is cranked. The warning light turns
off after a specified period of time.
A system malfunction is indicated if the
warning light constantly flashes,
constantly illuminates or does not
illuminate at all when the ignition switch
is turned to the ON position. If either of
these occur, consult an Authorized Mazda
Dealer as soon as possible. The system
may not work in an accident.
qFastening the Seat Belt
1. Grasp the tongue (C).
2. Slowly pull out the lap/shoulder belt.
3. Insert the tongue (C) into the buckle
(D) until you hear a click.
WARNING
Never tamper with the air bag/
pretensioner systems and always have
an Authorized Mazda Dealer perform
all servicing and repairs:
Self-servicing or tampering with the
systems is dangerous. An air bag/
pretensioner could accidentally
activate or become disabled causing
serious injury or death.
(A)
(C)
(B)
(D)
2-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page31
Tuesday, May 9 2006 10:43 AM
Black plate (31,1)
Essential Safety Equipment
Seat Belt Systems
WARNING
WARNING
Fastening the Center-Rear Seat Belt
with Only One Buckle:
Positioning the Lap Portion of the
Seat Belt:
Fastening the center-rear seat belt
with only one buckle is dangerous. If
only one pair of seat belt tongue and
buckle, either tongue (A) and anchor
buckle (B) or tongue (C) and anchor
buckle (D), is fastened, the seat belt
cannot provide full protection. In a
sudden stop or collision, the user
could slide under the belt and suffer
serious injuries. Always make sure
that both pairs of seat belt tongues and
buckles are fastened properly.
The lap portion of the seat belt worn
too high is dangerous. In a collision,
this would concentrate the impact
force directly on the abdominal area,
causing serious injury. Wear the lap
portion of the belt snugly and as low
as possible.
qUnfastening the Seat Belt
Depress the button on the buckle. If the
belt does not fully retract, pull it out and
check for kinks or twists. Then make sure
it remains untwisted as it retracts.
Positioning the Shoulder Portion of
the Seat Belt:
Improper positioning of the shoulder
portion of the seat belt is dangerous.
Always make sure the shoulder
portion of the seat belt is positioned
across your shoulder and near your
neck, but never under your arm, on
your neck, or on your upper arm.
4. Position the lap belt as low as possible,
not on the abdominal area, then adjust
the shoulder belt so that it fits snugly
against your body.
Button
NOTE
If a belt does not fully retract, inspect it
for kinks and twists. If it is still not
retracting properly, have it inspected at
an Authorized Mazda Dealer.
2-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page32
Tuesday, May 9 2006 10:43 AM
Black plate (32,1)
Essential Safety Equipment
Seat Belt Systems
qUnfastening the Lap Portion of
qStowing and pulling out the
the Seat Belt
Center-Rear Position Seat Belt
Insert a small object such as a key in the
anchor buckle (B) slot.
The center-rear position seat belt can be
stowed using the following procedure.
(A)
(B)
CAUTION
When stowing the seat belt, make sure
the belt is locked securely into the
recess. If the seat belt is not properly
stowed, it might get caught in the seats
and be damaged.
To stow the seat belt, retract the belt, put
tongues (A) and (C) together and insert
them into the recess.
NOTE
To encourage rear seat passengers to
wear their seat belts, we suggest leaving
the center-rear lap position of the belt
fastened at all times.
(A)
qFastening the Lap Portion of the
Seat Belt
(C)
Grasp tongue (A) and insert it into the
anchor buckle (B) until you hear a click. It
is now secure for passenger use.
To pull out the seat belt, slide tongues
with your finger, and slowly pull out the
seat belt from the recess.
NOTE
Pulling out the seat belt all the way out
will switch it to automatic locking
mode. If automatic locking mode is not
needed, retract the seat belt fully to
convert it back to emergency locking
mode.
2-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page33
Tuesday, May 9 2006 10:43 AM
Black plate (33,1)
Essential Safety Equipment
Seat Belt Systems
Seat Belt Extender
WARNING
If your seat belt is not long enough, even
when fully extended, a seat belt extender
may be available to you at no charge from
your Authorized Mazda Dealer.
This extender will be only for you and for
the particular vehicle and seat. Even if it
plugs into other seat belts, it may not hold
in the critical moment of a crash.
When ordering an extender, only order
one that provides the necessary additional
length to fasten the seat belt properly.
Please contact your Authorized Mazda
Dealer for more information.
Do not use an extender that is too
long:
Using an extender that is too long is
dangerous. The seat belt will not fit
properly. In an accident, the seat belt
will not provide adequate protection
and you could be seriously injured. Do
not use the extender or choose one
shorter in length if the distance
between the extender's buckle and the
center of the user's body is less than
15cm (6 in).
NOTE
WARNING
When not in use, remove the seat belt
extender and store it in the vehicle. If
the seat belt extender is left connected,
the seat belt extender might get
damaged as it will not retract with the
rest of the seat belt and can easily fall
out of the door when not in use and be
damaged. In addition, the seat belt
warning light will not illuminate and
function properly.
Do not use a seat belt extender unless
it is necessary:
Using a seat belt extender when not
necessary is dangerous. The seat belt
will be too long and not fit properly. In
an accident, the seat belt will not
provide adequate protection and you
could be seriously injured. Only use
the extender when it is required to
fasten the seat belt properly.
Do not use an improper extender:
Using a seat belt extender that is for
another person or a different vehicle
or seat is dangerous. The seat belt will
not provide adequate protection and
the user could be seriously injured in
an accident. Only use the extender
provided for you and for the particular
vehicle and seat. NEVER use the
extender in a different vehicle or seat.
2-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page34
Tuesday, May 9 2006 10:43 AM
Black plate (34,1)
Essential Safety Equipment
Seat Belt Systems
Driver seated/Front passenger not
seated
Seat Belt Warning Light/Beep
The belt minder is a supplemental
warning to the seat belt warning function.
If the driver's seat belt is not fastened
when the ignition switch is turned to the
ON position, the warning light/beep
operates to give you further reminders
according to the chart below.
The seat belt warning light illuminates
and a beep sound will be heard if the
driver's seat belt is not fastened when the
ignition switch is turned to the ON
position.
Vehicle speed
Between 0 ― 20
km/h
(0 ― 12 mph)
20 km/h
(12 mph) or
more
Condition
Seat belt
Conditions of operation
Indicator
Beep
Condition
Result
The driver's seat belt is not The warning light
fastened when the ignition flashes and a beep
switch is turned to the ON sound will be heard
: Fastened
: Unfastened
: Illuminated
: Flashing
: Beep
position.
for about 6 seconds.
The driver's seat belt is
fastened while the warning
light and the beep sound are
activated.
The warning light
turns off and the beep
sound stops.
Once the beep sound is heard, it continues
sounding even if the vehicle speed lowers
to 20 km/h (12 mph) or less until the
seatbelt is fastened or the beep sound
period has passed.
The driver's seat belt is
The warning light will
fastened before the ignition not illuminate and the
switch is turned to the ON beep sound will not be
position.
heard.
qBelt Minder
NOTE
The belt minder can be deactivated.
Consult an Authorized Mazda Dealer to
deactivate and restore the seat belt
minder.
2-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page35
Tuesday, May 9 2006 10:43 AM
Black plate (35,1)
Essential Safety Equipment
Seat Belt Systems
Driver seated/Front passenger seated
The seat belt warning light/beep reminds
the front passenger to fasten the seat belt
according to the chart below.
Vehicle speed
Between 0 ― 20
km/h
(0 ― 12 mph)
20 km/h
(12 mph) or
more
Condition
Seat belt
(Driver)
Seat belt
(Passenger)
Indicator
Beep
: Fastened
: Unfastened
: Illuminated
: Flashing
: Beep
Once the beep sound is heard, it continues
sounding even if the vehicle speed lowers
to 20 km/h (12 mph) or less until the
seatbelt is fastened or the beep sound
period has passed.
NOTE
l
To allow the front passenger seat
weight sensor to function properly,
do not place and sit on an additional
seat cushion on the front passenger
seat. The sensor may not function
properly because the additional seat
cushion could cause sensor
interference.
l
Placing packages, luggage, pets or
other items on the front passenger
seat may cause the front passenger
belt minder warning light and beep
to operate depending on the weight
of the item.
2-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page36
Tuesday, May 9 2006 10:43 AM
Black plate (36,1)
Essential Safety Equipment
Child Restraint
Child Restraint Precautions
Mazda strongly urges the use of child-restraint systems for children small enough to use
them.
You are required by law to use a child-restraint system for children in the U.S. and Canada.
Check your local and state or provincial laws for specific requirements regarding the safety
of children riding in your vehicle.
Whatever child-restraint system you consider, please pick the appropriate one for the age
and size of the child, obey the law and follow the instructions that come with the individual
child-restraint system.
A child who has outgrown child-restraint systems should sit in the rear and use seat belts,
both lap and shoulder. If the shoulder belt crosses the neck or face, move the child closer to
the center of the vehicle in the outboard seats, and towards the buckle on the right if the
child is seated on the center seat.
Statistics confirm that the rear seat is the best place for all children up to 12 years of age,
and more so with a supplemental restraint system (air bags).
A rear-facing child-restraint system should NEVER be used on the front seat with the air
bag system activated. The front passenger's seat is also the least preferred seat for other
child-restraint systems.
To reduce the chance of injuries caused by deployment of the front passenger air bag, the
front passenger seat weight sensors work as a part of the supplemental restraint system.
This system deactivates the front passenger front and side air bags and also the front
passenger seat belt pretensioner system when the total seated weight on the front passenger
seat is less than approximately 30 kg (66 lb).
When an infant or small child sits on the front passenger seat, the system shuts off the front
passenger front and side air bags and seat belt pretensioner system, so make sure the front
passenger air bag deactivation indicator light illuminates.
Even if the front passenger air bag is shut off, Mazda strongly recommends that children be
properly restrained and child-restraint systems of all kinds are properly secured on the rear
seats which are the best place for children.
2-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page37
Tuesday, May 9 2006 10:43 AM
Black plate (37,1)
Essential Safety Equipment
Child Restraint
WARNING
Use the correct size child-restraint system:
For effective protection in vehicle accidents and sudden stops, a child must be
properly restrained using a seat belt or child-restraint system depending on age and
size. If not, the child could be seriously injured or even killed in an accident.
Follow the manufacturer's instructions and always keep the child-restraint system
buckled down:
An unsecured child-restraint system is dangerous. In a sudden stop or a collision it
could move causing serious injury or death to the child or other occupants. Make sure
any child-restraint system is properly secured in place according to the child-restraint
system manufacturer's instructions. When not in use, remove it from the vehicle or
fasten it with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCH
child-restraint systems and the corresponding tether anchor.
Always secure a child in a proper child-restraint system:
Holding a child in your arms while the vehicle is moving is extremely dangerous. No
matter how strong the person may be, he or she cannot hold onto a child in a sudden
stop or collision and it could result in serious injury or death to the child or other
occupants. Even in a moderate accident, the child may be exposed to air bag forces
that could result in serious injury or death to the child, or the child may be slammed
into an adult, causing injury to both child and adult.
Never use a rear-facing child-restraint system in the front seat with an air bag that
could deploy:
Rear-facing child-restraint systems on the front seat are particularly dangerous even
though you may feel assured that a front passenger air bag will not deploy based on
the fact that the front passenger air bag deactivation indicator light illuminates.
The child-restraint system can be hit by a deploying air bag and moved violently
backward resulting in serious injury or death to the child.
2-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page38
Tuesday, May 9 2006 10:43 AM
Black plate (38,1)
Essential Safety Equipment
Child Restraint
WARNING
Do not install a front-facing child-restraint system on the front passenger seat unless
it is unavoidable:
In a collision, the force of a deploying air bag could cause serious injury or death to
the child. If installing a front-facing child-restraint system on the front passenger seat
is unavoidable, move the front passenger seat as back as possible.
Seating a child in a child-restraint system on the front passenger seat is dangerous:
Vehicles equipped with front passenger seat weight sensors are also equipped with a
passenger seat weight sensors, if you must use the front passenger seat for children,
seating a child in a child-restraint system on the front passenger seat under the
following conditions increases the danger of the front passenger air bag deploying
and could result in serious injury or death to the child.
l
The total seated weight of the child with the child-restraint system on the front
passenger seat is approximately 30 kg (66 lb) or more with a child in the child-
restraint system.
l
Luggage or other items are placed on the seat with the child in the child-restraint
system.
l
A rear passenger or luggage push or pull down on the front passenger seatback.
A rear passenger puts their feet on the front seat rails.
Luggage or other items are placed on the seatback or hung on the head restraint.
The seat is washed.
Liquids are spilled on the seat.
The front passenger seat is moved backward, pushing into luggage or other items
l
l
l
l
l
placed behind it.
The front passenger seatback contacts the rear seat.
Luggage or other items are placed between the front passenger seat and driver seat.
Any accessories, which might increase the total seated weight on the front
l
l
l
passenger seat, are attached to the front passenger seat.
The designated positions with seat belts on the rear seats are the safest places for
children. Always use seat belts and child restraints.
2-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page39
Tuesday, May 9 2006 10:43 AM
Black plate (39,1)
Essential Safety Equipment
Child Restraint
WARNING
Do not allow a child to lean over or against the side window of a vehicle with side and
curtain air bags:
It is dangerous to allow anyone to lean over or against the side window, the area of
the front passenger seat, the front and rear window pillars and the roof edge along
both sides from which the side and curtain air bags deploy, even if a child-restraint
system is used. If the vehicle is equipped with side and curtain air bags, the impact of
inflation could cause serious injury or death to the child. Furthermore, leaning over
or against the front door could block the side and curtain air bags and eliminate the
advantages of supplemental protection. With the front air bag and the additional side
air bag that comes out of the front seat, the rear seat is always a better location for
children. Do not allow a child to lean over or against the side window, even if the child
is seated in a child-restraint system.
Never use one seat belt on more than one person at a time:
Using one seat belt for more than one person at a time is dangerous. A seat belt used
in this way cannot spread the impact forces properly and the two passengers could be
crushed together and seriously injured or even killed. Never use one belt for more
than one person at a time and always operate the vehicle with each occupant properly
restrained.
CAUTION
A seat belt or child-restraint system can become very hot in a closed vehicle during
warm weather. To avoid burning yourself or a child, check them before you or your child
touches them.
NOTE
Your Mazda is equipped with LATCH lower anchors for attachment of specially
designed LATCH child-restraint systems in the rear seat. When using these anchors to
2-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page40
Tuesday, May 9 2006 10:43 AM
Black plate (40,1)
Essential Safety Equipment
Child Restraint
Installing Child-Restraint
Systems
WARNING
Tethered Child-Restraint Systems
Work Only on Tether-Equipped Rear
Seats:
Accident statistics reveal that a child is
safer in the rear seat. The front passenger's
seat is clearly the worst choice for any
child under 12, and with rear-facing child-
restraint systems it is clearly unsafe due to
air bags.
Installation of a tether equipped child-
restraint system in the front
passenger's seat defeats the safety
design of the system and will result in
an increased chance of serious injury
if the child-restraint system goes
forward without benefit of being
tethered.
Some child-restraint systems now come
with tethers and therefore must be
installed on the seats that take tethers to
be effective. In your Mazda, tethered
child-restraint systems can only be
accommodated in the three positions on
the rear seat.
Place tether equipped child-restraint
systems where there are tether
anchors.
qRear Outboard Seat Child-
Even if your vehicle is equipped with
front passenger seat weight sensors (page
2-48), which automatically deactivates the
front passenger air bag, a rear seat is the
safest place for a child of any age or size.
Restraint System Installation
Follow these instructions when using a
child-restraint system, unless you are
attaching a LATCH-equipped child-
restraint system to the rear LATCH lower
anchors. Refer to “LATCH Child-
Some child-restraint systems also employ
specially designed LATCH attachments;
refer to “LATCH Child-Restraint
NOTE
Follow the child-restraint system
manufacturer's instructions carefully. If
you are not sure whether you have a
LATCH system or tether, check in the
child-restraint system manufacturer's
instructions and follow them
accordingly. Depending on the type of
child-restraint system, it may not
employ seat belts which are in
automatic locking mode.
2-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page41
Tuesday, May 9 2006 10:43 AM
Black plate (41,1)
Essential Safety Equipment
Child Restraint
1. Secure the child-restraint system with
the lap portion of the lap/shoulder belt.
See the manufacturer's instructions on
the child-restraint system for belt
routing instructions.
NOTE
Inspect this function before each use of
the child-restraint system. You should
not be able to pull the shoulder belt out
of the retractor while the system is in
the automatic locking mode. When you
remove the child-restraint system, be
sure the belt fully retracts to return the
system to emergency locking mode
before occupants use the seat belts.
2. To get the retractor into the automatic
locking mode, pull the shoulder belt
portion of the seat belt until the entire
length of the belt is out of the retractor.
4. If your child-restraint system requires
the use of a tether strap, refer to the
manufacturer's instructions to hook and
tighten the tether strap after raising the
head restraint.
Anchor bracket location
3. Push the child-restraint system firmly
into the vehicle seat. Be sure the belt
retracts as snugly as possible. Clicking
from the retractor will be heard during
retraction if the system is in the
automatic locking mode. If the belt
does not lock the seat down tight,
repeat this step.
Tether strap position
Tether
strap
Anchor
bracket
2-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page42
Tuesday, May 9 2006 10:43 AM
Black plate (42,1)
Essential Safety Equipment
Child Restraint
3. Secure the tether strap according to the
child-restraint system manufacturer's
instruction.
WARNING
Use the tether and tether anchor only
for a child-restraint system:
Anchor bracket location
Using the tether or tether anchor to
secure anything but a child-restraint
system is dangerous. This could
weaken or damage the tether or tether
anchor and result in injury.
Cover
Always route the tether strap between
the head restraint and the seatback:
Routing the tether strap on top of the
head restraint is dangerous. In a
collision the tether strap could slide off
the head restraint and loosen the
child-restraint system. The child-
restraint system could move which
may result in death or injury to the
child.
Anchor bracket
Tether strap position
Tether
strap
Always attach the tether strap to the
correct tether anchor position:
Anchor
Cover
Attaching the tether strap to the
incorrect tether anchor position is
dangerous. In a collision, the tether
strap could come off and loosen the
child-restraint system. If the child-
restraint system moves it could result
in death or injury to the child.
bracket
qCenter-Rear Seat Child-Restraint
System Installation
1. Make sure the seatback is securely
latched by pushing it back until it is
fully locked.
2. Secure the child-restraint system with
the seat belt, according to the
manufacturer's instructions.
2-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page43
Tuesday, May 9 2006 10:43 AM
Black plate (43,1)
Essential Safety Equipment
Child Restraint
qIf You Must Use the Front Seat
WARNING
for Children
If you cannot put all children in the rear
seat, at least put the smallest children in
the rear and be sure the largest child up
front uses the shoulder belt over the
shoulder.
NEVER put a rear-facing child-restraint
system on the front passenger seat, even
with a seat weight sensor equipped
vehicle.
This seat is also not set up for tethered
child-restraint systems, put them in one of
the rear seat positions set up with tether
anchors.
Likewise the LATCH child-restraint
system cannot be secured in the front
passenger's seat and should be used in the
rear seat.
Don't allow anyone to sleep against the
side window if you have an optional side
and curtain air bag, it could cause serious
injuries to an out of position occupant. As
children more often sleep in cars, it is
better to put them in the rear seat. If
installing the child-restraint system on the
front seat is unavoidable, follow these
instructions when using a front-facing
child-restraint system in the front
passenger's seat.
Use the tether and tether anchor only
for a child-restraint system:
Child-restraint system anchorages are
designed to withstand only those loads
imposed by correctly installed child-
restraint systems.Under no
circumstances are they to be used for
adult seat belts, harnesses, or for
attaching other items or equipment to
the vehicle.
Always attach the tether strap to the
correct tether anchor position:
Attaching the tether strap to the
incorrect tether anchor position is
dangerous. In a collision, the tether
strap could come off and loosen the
child-restraint system. If the child-
restraint system moves it could result
in death or injury to the child.
2-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page44
Tuesday, May 9 2006 10:43 AM
Black plate (44,1)
Essential Safety Equipment
Child Restraint
NOTE
WARNING
l
To check if your front seats have side
Never use a rear-facing child-restraint
system in the front seat with an air bag
that could deploy:
Rear-facing child-restraint systems on
the front seat are particularly
dangerous.
air bags:
Mazda vehicles equipped with side
air bag will have a “SRS AIRBAG”
tag on the outboard shoulder of the
front seats.
l
To check if your vehicle has curtain
Even in a moderate collision, the
child-restraint system can be hit by a
deploying air bag and moved violently
backward resulting in serious injury
or death to the child. Even though you
may feel assured that the front
passenger air bag will not deploy
based on the fact that the front
passenger air bag deactivation
indicator light illuminates.
air bags:
Mazda vehicles equipped with
curtain air bag will have an “SRS
AIRBAG” marking on the front and
rear window pillars along the roof
edge.
WARNING
Always move the front passenger seat
as far back as possible if installing a
front-facing child-restraint system on
it is unavoidable:
As your vehicle has front air bags and
doubly so if your vehicle has side air
bags, a front-facing child-restraint
system should be put on the front
passenger seat only when it is
unavoidable.
Even if the front passenger air bag
deactivation indicator light
illuminates, always move the seat as
far back as possible, because the force
of a deploying air bag could cause
serious injury or death to the child.
2-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page45
Tuesday, May 9 2006 10:43 AM
Black plate (45,1)
Essential Safety Equipment
Child Restraint
qFront Passenger's Seat Child-
WARNING
Restraint System Installation
1. Slide the seat as far back as possible.
Do not allow a child to lean over or
against the side window of a vehicle
with side and curtain air bags:
It is dangerous to allow anyone to lean
over or against the side window, the
area of the front passenger seat, the
front and rear window pillars and the
roof edge along both sides from which
the side and curtain air bags deploy,
even if a child-restraint system is used.
If the vehicle is equipped with side and
curtain air bags, the impact of
inflation could cause serious injury or
death to the child. Furthermore,
leaning over or against the front door
could block the side and curtain air
bags and eliminate the advantages of
supplemental protection. With the
front air bag and the additional side
air bag that comes out of the front
seat, the rear seat is always a better
location for children. Do not allow a
child to lean over or against the side
window, even if the child is seated in a
child-restraint system.
2. Secure the child-restraint system with
the lap portion of the lap/shoulder belt.
See the manufacturer's instructions on
the child-restraint system for belt
routing instructions.
3. To get the retractor into the automatic
locking mode, pull the shoulder belt
portion of the seat belt until the entire
length of the belt is out of the retractor.
4. Push the child-restraint system firmly
into the vehicle seat. Be sure the belt
retracts as snugly as possible. Clicking
from the retractor will be heard during
retraction if the system is in automatic
locking mode. If the belt does not lock
the seat down tight, repeat the previous
step and also this one.
2-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page46
Tuesday, May 9 2006 10:43 AM
Black plate (46,1)
Essential Safety Equipment
Child Restraint
NOTE
WARNING
l
Inspect this function before each use
Do not seat a child in a child-restraint
system on the front passenger seat if
the front passenger air bag
deactivation indicator light does not
illuminated:
While it is always better to install any
child-restraint system on the rear seat,
it is imperative that a child-restraint
system ONLY be used on the front
passenger seat if the deactivation
indicator light illuminates when the
child is seated in the child-restraint
a child-restraint system installed on
the front passenger seat with the front
passenger air bag deactivation
of the child-restraint system. You
should not be able to pull the
shoulder belt out of the retractor
while the system is in the automatic
locking mode. When you remove the
child-restraint system, be sure the
belt fully retracts to return the system
to emergency locking mode before
occupants use the seat belts.
l
Follow the child-restraint system
manufacturer's instructions carefully.
Depending on the type of child-
restraint system, it may not employ
seat belts which are in automatic
locking mode.
indicator light not illuminated is
dangerous. If this indicator light does
not illuminate even when the total
seated weight is less than
5. Make sure the front passenger air bag
deactivation indicator light illuminates
after installing a child-restraint system
on the front passenger seat.
approximately 30 kg (66 lb), this
means that the front passenger front
and side air bags, and seat belt
pretensioner are ready for deployment.
If an accident were to deploy an air
bag, a child in a child-restraint system
sitting in the front passenger seat
could be seriously injured or killed. If
the indicator light does not illuminate
after seating a child in a child-
restraint system on the front passenger
seat, seat a child in a child-restraint
system on the rear seat and consult an
Authorized Mazda Dealer as soon as
possible.
Refer to Front passenger air bag
deactivation indicator light on page
2-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page47
Tuesday, May 9 2006 10:43 AM
Black plate (47,1)
Essential Safety Equipment
Child Restraint
LATCH Child-Restraint Systems
Your Mazda is equipped with LATCH lower anchors for attachment of specially designed
LATCH child-restraint systems in the rear seat. Both anchors must be used, otherwise the
seat will bounce around and put the child in danger. Most LATCH child-restraint systems
must also be used in conjunction with a tether to be effective. If they have a tether you
must use it to better assure your child's safety.
WARNING
Follow the manufacturer's instructions for the use of the child-restraint system:
An unsecured child-restraint system is dangerous. In a sudden stop or a collision it
could move causing serious injury or death to the child or other occupants. Make sure
the child-restraint system is properly secured in place according to the child-restraint
system manufacturer's instructions.
Never attach two child-restraint systems to the same LATCH lower anchor:
Attaching two child-restraint systems to the same LATCH lower anchor is dangerous.
In a collision, one anchor may not be strong enough to hold two child-restraint system
attachments, and it may break, causing serious injury or death. If you use the seat
position for another child-restraint system when an outboard LATCH position is
occupied, use the center seat belts instead, and the tether if tether-equipped.
Make sure the child-restraint system is properly secured:
An unsecured child-restraint system is dangerous. In a sudden stop or a collision it
could move causing serious injury or death to the child or other occupants. Follow the
child-restraint system manufacturer's instructions on belt routing to secure the seat
just as you would with a child in it so that nobody is tempted to put a child in an
improperly secured seat later on. When not in use, remove it from the vehicle or fasten
it with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCH child-
restraint systems.
Make sure there are no seat belts or foreign objects near or around the LATCH child-
restraint system:
Not following the child-restraint system manufacturer's instructions when installing
the child-restraint system is dangerous. If seat belts or a foreign object prevent the
child-restraint system from being securely attached to the LATCH lower anchors and
the child-restraint system is installed improperly, the child-restraint system could move
in a sudden stop or collision causing serious injury or death to the child or other
occupants. When installing the child-restraint system, make sure there are no seat
belts or foreign objects near or around the LATCH lower anchors. Always follow the
child-restraint system manufacturer's instructions.
2-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page48
Tuesday, May 9 2006 10:43 AM
Black plate (48,1)
Essential Safety Equipment
Child Restraint
Anchor bracket location
qLATCH Child-Restraint System
Installation Procedure (Rear
Outboard Seats)
1. Expand the area between the seat
bottom and the seatback slightly to
verify the locations of the LATCH
lower anchors.
Tether strap position
Tether
strap
NOTE
The markings above the LATCH lower
anchors indicate the locations of
LATCH lower anchors for the
Anchor
bracket
attachment of a child-restraint system.
2. Secure the child-restraint system using
BOTH LATCH lower anchors,
following the child-restraint system
manufacturer's instruction.
WARNING
Use the tether and tether anchor only
for a child-restraint system:
Using the tether or tether anchor to
secure anything but a child-restraint
system is dangerous. This could
weaken or damage the tether or tether
anchor and result in injury.
3. If your child-restraint system came
equipped with a tether, that probably
means it is very important to properly
secure the tether for child safety. Please
carefully follow the child-restraint
system manufacturer's instructions
when installing tethers.
2-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page49
Tuesday, May 9 2006 10:43 AM
Black plate (49,1)
Essential Safety Equipment
Child Restraint
qLATCH Child-Restraint System
Installation Procedure (Rear
Center Seat)
WARNING
Always route the tether strap between
the head restraint and the seatback:
Routing the tether strap on top of the
head restraint is dangerous. In a
collision the tether strap could slide off
the head restraint and loosen the
child-restraint system. The child-
restraint system could move which
may result in death or injury to the
child.
The LATCH lower anchors at the center
of the rear seat are much further apart than
the sets of LATCH lower anchors for
child-restraint system installation at other
seating positions. Child-restraint systems
with rigid LATCH attachments cannot be
installed on the center seating position.
Some LATCH equipped child-restraint
systems can be placed in the center
position and will reach the nearest
LATCH lower anchors which are 466 mm
(18.35 in) apart. LATCH compatible
child-restraint systems (with attachments
on belt webbing) can be used at this
seating position only if the child-restraint
system manufacturer's instructions state
that the child-restraint system can be
installed to LATCH lower anchors that are
466 mm (18.35 in) apart. Do not attach
two child-restraint systems to the same
LATCH lower anchor. If your child-
restraint system has a tether, it must also
be used for your child's optimum safety.
Always attach the tether strap to the
correct tether anchor position:
Attaching the tether strap to the
incorrect tether anchor position is
dangerous. In a collision, the tether
strap could come off and loosen the
child-restraint system. If the child-
restraint system moves it could result
in death or injury to the child.
1. Make sure the seatback is securely
latched by pushing it back until it is
fully locked.
2-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page50
Tuesday, May 9 2006 10:43 AM
Black plate (50,1)
Essential Safety Equipment
Child Restraint
2. Expand the area between the seat
bottom and the seatback slightly to
verify the locations of the LATCH
lower anchors.
Anchor bracket location
Cover
Anchor bracket
Tether strap position
Tether
strap
NOTE
The markings above the LATCH lower
anchors indicate the locations of
LATCH lower anchors for the
Anchor
Cover
bracket
attachment of a child-restraint system.
3. Secure the child-restraint system using
BOTH LATCH lower anchors,
following the child-restraint system
manufacturer's instructions.
4. If your child-restraint system came
equipped with a tether, that probably
means it is very important to properly
secure the tether for child safety. Please
carefully follow the child-restraint
system manufacturer's instructions
when installing tethers.
2-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page51
Tuesday, May 9 2006 10:43 AM
Black plate (51,1)
Essential Safety Equipment
Child Restraint
WARNING
Use the tether and tether anchor only
for a child-restraint system:
Using the tether or tether anchor to
secure anything but a child-restraint
system is dangerous. This could
weaken or damage the tether or tether
anchor and result in injury.
Always attach the tether strap to the
correct tether anchor position:
Attaching the tether strap to the
incorrect tether anchor position is
dangerous. In a collision, the tether
strap could come off and loosen the
child-restraint system. If the child-
restraint system moves it could result
in death or injury to the child.
2-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page52
Tuesday, May 9 2006 10:43 AM
Black plate (52,1)
Essential Safety Equipment
SRS Air Bags
Supplemental Restraint Systems (SRS) Precautions
The front and side supplemental restraint systems (SRS) include up to 6 air bags (verify
“SRS AIRBAG” location indicator marks).
They are located in:
l
The steering wheel hub (driver air bag)
l
The front passenger dashboard (front passenger air bag)
l
The outboard sides of the front seatbacks (side air bags)
l
The front and rear window pillars, and the roof edge along both sides (curtain air bags)
These systems operate independently depending on the type of accident encountered; if
you have side and curtain air bags, the side and curtain air bags are not likely to deploy on
both sides in the same accident because a vehicle is not often hit from both sides. The side
and curtain air bags and the frontal air bag system will not normally deploy during the
same type of accident unless a combination of frontal and side impacts occur.
The air bag supplemental restraint systems are designed to provide supplemental protection
only in the front seats in certain situations and the rear outside passenger positions only in
same-side collisions, so seat belts are always important in the following ways:
Without seat belt usage, the air bags cannot provide adequate protection during an accident.
Seat belt usage is necessary to:
l
Keep the occupant from being thrown into an inflating air bag.
l
Reduce the possibility of injuries during an accident that is not designed for air bag
inflation, such as roll-over or rear impact.
l
Reduce the possibility of injuries in frontal or side collisions that are not severe enough
to activate the air bags.
l
Reduce the possibility of being thrown from your vehicle.
l
Reduce the possibility of injuries to lower body and legs during an accident because the
air bags provide no protection to these parts of the body.
l
Hold the driver in a position which allows better control of the vehicle.
Children should be protected by a child-restraint system as stipulated by law in every state
and province. In certain states and provinces, laws vary on the size a child must be to use a
child-restraint system (page 2-24).
Carefully consider which child-restraint system is necessary for your child and follow the
installation directions in this Owner's Manual as well as the child-restraint system
manufacturer's instructions.
2-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page53
Tuesday, May 9 2006 10:43 AM
Black plate (53,1)
Essential Safety Equipment
SRS Air Bags
WARNING
Seat belts must be worn in air bag equipped vehicles:
Depending only on the air bags for protection during an accident is dangerous. Alone,
air bags may not prevent serious injuries. The appropriate air bags can be expected to
inflate only in the first collision with frontal, near frontal or side forces that are at
least moderate. Vehicle occupants should always wear seat belts.
Children should not ride in the front passenger seat:
Placing a child, 12 years or under, in the front seat is dangerous. The child could be
hit by a deploying air bag and be seriously injured or even killed. A sleeping child is
more likely to lean against the door and be hit by the side air bag in a moderate, right-
side collision. Whenever possible, always secure a child 12 years and under on the
rear seat with an appropriate child-restraint system for the child's age and size.
Never use a rear-facing child-restraint system in the front seat with an air bag that
could deploy:
Rear-facing child-restraint systems on the front seat are particularly dangerous even
though you may feel assured that a front passenger air bag will not deploy based on
the fact that the front passenger air bag deactivation indicator light illuminates.
The child-restraint system can be hit by a deploying air bag and moved violently
backward resulting in serious injury or death to the child.
Do not sit too close to the driver and front passenger air bags:
Sitting too close to the driver and front passenger air bag modules or placing hands or
feet on them is extremely dangerous. The driver and front passenger air bags inflate
with great force and speed. Serious injuries could occur if someone is too close. The
driver should always hold onto only the rim of the steering wheel. The front seat
passenger should keep both feet on the floor. Front seat occupants should adjust their
seats as far back as possible and always sit upright against the seatbacks with seat
belts worn properly.
2-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page54
Tuesday, May 9 2006 10:43 AM
Black plate (54,1)
Essential Safety Equipment
SRS Air Bags
WARNING
Sit in the center of the seat and wear seat belts properly:
Sitting too close to the side air bag modules or placing hands on them is extremely
dangerous. The side air bags inflate with great force and speed directly out of the
outboard side of the front seat and expand along the front door on the side the car is
hit. Serious injury could occur if someone is sitting too close to the door or leaning
against a window, or if rear seat occupants grab the sides of the front seatbacks.
Furthermore, sleeping up against the door or hanging out the windows in the vehicle
could block the side and curtain air bags and eliminate the advantages of
supplemental protection. Give the side and curtain air bags room to work by sitting in
the center of the seat while the vehicle is moving with seat belts worn properly.
Do not attach objects on or around the area where driver and front passenger air bags
deploy:
Attaching an object to the driver and front passenger air bag modules or placing
something in front of them is dangerous. In an accident, an object could interfere with
air bag inflation and injure the occupants.
Do not attach objects on or around the area where a side air bag deploys:
Attaching objects to a front seat in such a way as to cover the outboard side of the seat
in any way is dangerous. In an accident the object could interfere with the side air
bag, which inflates from the outboard side of the front seats, impeding the added
protection of the side air bag system or redirecting the air bag in a way that is
dangerous. Furthermore, the bag could be cut open releasing the gas.
Do not hang net bags, map pouches or backpacks with side straps on the front seats.
Never use seat covers on the front seats. Always keep the side air bag modules in your
front seats free to deploy in the event of a side collision.
Do not attach objects on or around the area where a curtain air bag deploys:
Attaching objects to the areas where the curtain air bag deploys such as on the
windshield glass, side door glass, front and rear window pillars, and along the roof
edge and assist grips is dangerous. In an accident the object could interfere with the
curtain air bag, which inflates from the front and rear window pillars and along the
roof edge, impeding the added protection of the curtain air bag system or redirecting
the air bag in a way that is dangerous. Furthermore, the bag could be cut open
spewing exhaust.
Do not place hangers or any other objects on the assist grips. When hanging clothes,
hang them on the coat hook directly. Always keep the curtain air bag modules free to
deploy in the event of a side collision.
2-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page55
Tuesday, May 9 2006 10:43 AM
Black plate (55,1)
Essential Safety Equipment
SRS Air Bags
WARNING
Do not touch the components of the supplemental restraint system after the air bags
have inflated:
Touching the components of the supplemental restraint system after the air bags have
inflated is dangerous. Immediately after inflation, they are very hot. You could get
burned.
Never install any front-end equipment to your vehicle:
Installation of front-end equipment, such as frontal protection bar (kangaroo bar, bull
bar, push bar, or other similar devices.), snowplow, or winches is dangerous. The air
bag crash sensor system could be affected. This could cause air bags to inflate
unexpectedly, or it could prevent the air bags from inflating during an accident. Front
occupants could be seriously injured.
Do not modify the suspension:
Modifying the vehicle suspension is dangerous. If the vehicle's height or the
suspension is modified, the vehicle will be unable to accurately detect a collision
resulting in incorrect or unexpected air bag deployment and the possibility of serious
injuries.
Do not modify the supplemental restraint system:
Modifying the components or wiring of the supplemental restraint system is
dangerous. You could accidentally activate it or make it inoperable. Do not make any
modifications to the supplemental restraint system. This includes installing trim,
badges, or anything else over the air bag modules. It also includes installing extra
electrical equipment on or near system components or wiring. An Authorized Mazda
Dealer can provide the special care needed in the removal and installation of front
seats. It is important to protect the side and curtain air bag wiring and connections to
assure that the bags do not accidentally deploy and that the seats retain an
undamaged air bag connection.
Do not place luggage or other objects under the front seats:
Placing luggage or other objects under the front seats is dangerous. The components
essential to the supplemental restraint system could be damaged, and in the event of a
side collision, the appropriate air bags may not deploy, which could result in death or
serious injury. To prevent damage to the components essential to the supplemental
restraint system, do not place luggage or other objects under the front seats.
2-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page56
Tuesday, May 9 2006 10:43 AM
Black plate (56,1)
Essential Safety Equipment
SRS Air Bags
NOTE
l
When an air bag deploys, a loud inflation noise can be heard and some smoke will be
released. Neither is likely to cause injury, however, the texture of the air bags may
cause light skin injuries on body parts not covered with clothing through friction.
l
Should you sell your Mazda, we urge you to tell the new owner of its air bag systems
and that familiarization with all instructions about them, from the Owner's Manual, is
important.
2-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page57
Tuesday, May 9 2006 10:43 AM
Black plate (57,1)
Essential Safety Equipment
SRS Air Bags
Supplemental Restraint System Components
The supplemental restraint systems (SRS) have two basic subsystems:
l
The air bag system with inflators and air bags.
l
The electrical system with crash sensors and diagnostic module.
The air bags are mounted in the following locations:
l
The steering wheel hub
l
The front passenger dashboard
l
The outboard sides of the front seatbacks
l
The front and rear window pillars, and the roof edge along both sides
The air bags are out of sight until activated.
2-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page58
Tuesday, May 9 2006 10:43 AM
Black plate (58,1)
Essential Safety Equipment
SRS Air Bags
qFront Air Bag System Components
(2)
(3)
(4)
(1)
(6)
(10)
(9)
(5)
(8)
(7)
(6)
(1) Driver seat slide position sensor (page 2-48)
(2) Front seats
(3) Front dual stage inflators and air bags
(4) Front air bag sensor
(5) Front passenger air bag deactivation indicator light (page 2-48)
(6) Front seat belt pretensioner and load limiting systems (page 2-16)
(7) Front passenger seat weight sensors (page 2-48)
(8) Front passenger seat weight sensor control module
(9) Crash sensors and diagnostic module (SAS unit)
(10) Driver and front passenger seat belt buckle switches (page 2-48)
2-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page59
Tuesday, May 9 2006 10:43 AM
Black plate (59,1)
Essential Safety Equipment
SRS Air Bags
qSide and Curtain Air Bag System Components
(2)
(1)
(1)
(3)
(4)
(1) Side and curtain inflators and air bags
(2) Front seats
(3) Crash sensors and diagnostic module (SAS unit)
(4) Side crash sensor
2-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page60
Tuesday, May 9 2006 10:43 AM
Black plate (60,1)
Essential Safety Equipment
SRS Air Bags
How the Air Bags Work
qHow the Front Air Bags Work
When air bag crash sensors detect a frontal impact of greater than moderate force, an
electrical current is sent to the inflators.
Gases are produced to inflate the front air bags and after the inflation, the front air bags
quickly deflate.
The front air bags will function only once. After that, the front air bags will not work
again and must be replaced.
Only an Authorized Mazda Dealer can replace the system components.
The front, dual stage air bags control air bag inflation in two energy stages. During an
impact of moderate severity the front air bags deploy with lesser energy, whereas during
more severe impacts, they deploy with more energy. Deployment of the front air bags may
differ between the driver and the front passenger depending on the driver seat position,
front passenger weight and front seat belt usage, all of which provide data from each sensor
to the air bag system.
The front air bags will deploy only
in a frontal or frontal offset impact.
Driver seat slide position sensor
Your vehicle is equipped with a driver seat slide position sensor as a part of the
supplemental restraint system. The sensor is located under the driver seat. The sensor
determines whether the driver seat is fore or aft of a reference position and sends the seat
position to the diagnostic module (SAS unit). The sensor is also designed to control the
deployment of the driver air bag depending on how close the driver seat is to the steering
wheel.
The air bag/front seat belt pretensioner system warning light flashes if the sensor has a
possible malfunction (page 2-56).
2-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page61
Tuesday, May 9 2006 10:43 AM
Black plate (61,1)
Essential Safety Equipment
SRS Air Bags
Front passenger seat weight sensors
Your vehicle is also equipped with the front passenger air bag deactivation indicator light
sensors determine the total seated weight on the front passenger seat. The sensors are also
designed to prevent the front passenger front and side air bags and seat belt pretensioner
system from deploying if the total seated weight is less than approximately 30 kg (66 lb).
To reduce the chance of injuries caused by deployment of the front passenger air bag, the
system deactivates the front passenger front and side air bags and also the seat belt
pretensioner system when:
l
There is no passenger in the front passenger seat. (The front passenger air bag
deactivation indicator light does not illuminate.)
l
The total seated weight on the front passenger seat is less than approximately 30 kg (66
lb). (The front passenger air bag deactivation indicator light illuminates.)
This system shuts off the front passenger front and side air bags and seat belt pretensioner
system, so make sure the front passenger air bag deactivation indicator light illuminates
according to the following table.
The air bag/front seat belt pretensioner system warning light flashes and the front
passenger air bag deactivation indicator light illuminates if the sensors have a possible
malfunction. If this happens, the front passenger front and side air bags and seat belt
pretensioner system will not deploy.
Front passenger air bag deactivation indicator light
This indicator light illuminates to remind you that the front passenger front and side air
bags and seat belt pretensioner will not deploy during a collision.
If the front passenger weight sensors are working properly, the indicator light illuminates
when the ignition switch is turned to the ON position. After about 6 seconds it goes out.
2-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page62
Tuesday, May 9 2006 10:43 AM
Black plate (62,1)
Essential Safety Equipment
SRS Air Bags
The front passenger air bag deactivation indicator light illuminates or is off under the following conditions:
Front passenger seat
Total seated weight on the Front passenger air bag Front passenger front and
belt pretensioner
system
front passenger seat
deactivation indicator light
side air bags
Empty (Not occupied)*
OFF
ON
OFF
OFF
Less than approx. 30 kg
(66 lb)
OFF
OFF
Approx. 42 kg (93 lb) or
more
OFF
ON
ON
* If the front passenger seat belt is buckled, the front passenger air bag deactivation indicator light illuminates,
however this does not indicate a malfunction.
If the front passenger air bag deactivation indicator light does not illuminate when the
ignition switch is turned to the ON position and does not illuminate as indicated in the
above chart, do not allow a child to sit in the front passenger seat and consult an
Authorized Mazda Dealer as soon as possible. The system may not work properly in an
accident.
WARNING
Do not decrease the total seated weight on the front passenger seat:
When an adult or large child sits on the front passenger seat, decreasing the total
seated weight on the front passenger seat from the total seated weight of
approximately 42 kg (93 lb) required for air bag deployment is dangerous. The front
passenger seat weight sensors will detect the reduced total seated weight condition and
the front passenger front and side air bags and seat belt pretensioner system will not
deploy during an accident. The front passenger will not have the supplementary
protection of the air bag, which could result in serious injury. Decreasing the total
seated weight on the front passenger seat from the total seated weight of
approximately 42 kg (93 lb) could result in an air bag not deploying under the
following conditions, for example:
l
A rear passenger pushes up on the front passenger seat with the feet.
Luggage or other items placed under the front passenger seat or between the front
l
passenger seat and driver seat that push up the front passenger seat bottom.
The front passenger seat occupant sits in a manner that does not place the entire
l
weight of the occupant on the seat such as by sitting too close to the door, grasping
the assist grip or the rim of the moonroof and sitting with the seatback reclined too
far.
Any accessories which might decrease the total seated weight on the front
l
passenger seat are attached to the front passenger seat.
The front passenger front and side air bags and seat belt pretensioner systems will
deactivate if the total seated weight on the front passenger seat is close to 30 kg (66 lb)
and they will reactivate before the weight exceeds 42 kg (93 lb).
2-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page63
Tuesday, May 9 2006 10:43 AM
Black plate (63,1)
Essential Safety Equipment
SRS Air Bags
WARNING
Do not increase the total seated weight on the front passenger seat:
When an infant or small child sits on the front passenger seat, increasing the total
seated weight on the front passenger seat from the total seated weight of
approximately 30 kg (66 lb) is dangerous. The front passenger seat weight sensors will
detect the increased total seated weight, which could result in the unexpected
deployment of the front passenger front and side air bags and seat belt pretensioner
system in an accident and may cause serious injury. Increasing the total seated weight
on the front passenger seat beyond the total seated weight of approximately 30 kg (66
lb) could result in the front passenger front and side air bags and seat belt
pretensioner system deployment in an accident under the following conditions, for
example:
l
Luggage or other items are placed on the seat with the child in the child-restraint
system.
l
A rear passenger or luggage push or pull down on the front passenger seatback.
A rear passenger steps on the front passenger seat rails with the feet.
Luggage or other items are placed on the seatback or hung on the head restraint.
The seat is washed.
Liquids are spilled on the seat.
The front passenger seat is moved backward, pushing into luggage or other items
l
l
l
l
l
placed behind it.
The front passenger seatback contacts the rear seat.
Luggage or other items are placed between the front passenger seat and driver seat.
Any accessories which might increase the total seated weight on the front passenger
l
l
l
seat are attached to the front passenger seat.
The front passenger front and side air bags and seat belt pretensioner systems will
deactivate if the total seated weight on the front passenger seat is less than
approximately 30 kg (66 lb) and they will reactivate when the weight exceeds
approximately 42 kg (93 lb).
2-51
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page64
Tuesday, May 9 2006 10:43 AM
Black plate (64,1)
Essential Safety Equipment
SRS Air Bags
CAUTION
l
To assure proper deployment of the front air bag and to prevent damage to the sensors
in the front seat bottoms:
l
Do not place sharp objects on the front seat bottoms or leave heavy luggage on
them.
l
Do not spill any liquids on the front seats or under the front seats.
l
To allow the sensors to function properly, always perform the following:
l
Adjust the front seats as far back as possible and always sit upright against the
seatbacks with seat belts worn properly.
If you place your child on the front passenger seat, secure the child-restraint system
l
properly and slide the front passenger seat as far back as possible (page 2-33).
NOTE
l
The system requires about 10 seconds to alternate between turning the front passenger
front and side air bags and seat belt pretensioner system on or off.
l
The front passenger air bag deactivation indicator light may illuminate repeatedly if
luggage or other items are put on the front passenger seat, or if the temperature of the
vehicle's interior changes suddenly.
l
l
The front passenger air bag deactivation indicator light may illuminate for 10 seconds
if the total seated weight on the front passenger seat changes.
If the front passenger air bag deactivation indicator light does not illuminate after
installing a child-restraint system on the front passenger seat, install the child-restraint
system on the rear seat and consult an Authorized Mazda Dealer as soon as possible.
Driver and front passenger buckle switches
The buckle switches on the front seat belts detect whether or not the front seat belts are
securely fastened and further control the deployment of the air bags.
2-52
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page65
Tuesday, May 9 2006 10:43 AM
Black plate (65,1)
Essential Safety Equipment
SRS Air Bags
qHow the Side and Curtain Air Bags Work
When air bag crash sensors detect a side impact of greater than moderate force, an
electrical current is sent to the inflators.
Gases are produced to inflate the side and curtain air bags and after the inflation, the side
and curtain air bags quickly deflate. However, the side bag system for the front passenger
is designed to only deploy in accordance with the total seated weight on the front passenger
seat.
The side and curtain air bags will function only once. After that, the side and curtain air
bags will not work again and must be replaced. Only an Authorized Mazda Dealer can
replace the systems.
The side and curtain air bag will deploy only
on the side the vehicle receives the force of
the impact.
qAir Bag Activation/Deactivation
NOTE
If the front passenger seat weight sensors detect a total seated weight on the front
passenger seat is less than approximately 42 kg (93 lb), the front passenger front and side
may deploy.
2-53
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page66
Tuesday, May 9 2006 10:43 AM
Black plate (66,1)
Essential Safety Equipment
SRS Air Bags
l
Front air bag activation
Driving into a big hole or hitting the far
side of a hole.
The front air bags will inflate if the
severity of impact is above the designed
threshold level.
l
Hitting a solid wall straight on at
greater than about 22 km/h (14 mph).
Limitations to front air bag activation
Depending on the severity of impact, the
front air bags may not inflate in the
following cases:
l
l
Hitting a curb, pavement edge or hard
Impacts involving trees or poles cause
object.
severe cosmetic damage but may not
have enough stopping force to activate
the air bag.
l
Landing hard or the vehicle falling.
l
Frontal offset impact to the vehicle
may not provide the stopping force
necessary for air bag deployment.
l
Frontal impact within about a 30
degree range from head-on to the
vehicle.
2-54
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page67
Tuesday, May 9 2006 10:43 AM
Black plate (67,1)
Essential Safety Equipment
SRS Air Bags
l
Rear-ending or running under a truck's
Side and curtain air bag activation
tail gate may not provide the stopping
force necessary for air bag deployment.
The severity of impact above the designed
threshold level to one side of the vehicle
(driver or passenger side areas) will cause
the side and curtain air bags on that side
to inflate, but it will not normally deploy
the front air bags.
Non-activation of front air bags
Front air bags will not normally inflate in
the following cases:
l
Collision from the rear.
Limitations to side and curtain air bag
activation
Depending on the severity of impact, the
side and curtain air bags may not inflate in
the following cases:
l
Frontal offset impact may not provide
enough side impact to deploy the side
and curtain air bags.
l
Impact to the side, but it may deploy
the side and curtain air bags.
l
Side impacts involving trees or poles
can cause severe cosmetic damage but
may not have enough impact force to
activate the side and curtain air bags.
l
Vehicle roll-over, may deploy the side
and curtain air bags but not the front air
bags.
2-55
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page68
Tuesday, May 9 2006 10:43 AM
Black plate (68,1)
Essential Safety Equipment
SRS Air Bags
l
Vehicle roll-over may not provide
enough side force to deploy the side
and curtain air bags.
qConstant Monitoring
The following components of the air bag
systems are monitored by a diagnostic
system:
l
SAS unit
l
Front air bag sensor
l
Air bag modules
l
Side crash sensors
l
Side impacts with two-wheeled
l
Front seat belt pretensioners
vehicles may not provide enough force
to deploy the side and curtain air bags.
l
Related wiring
l
Driver seat slide position sensor
l
Front passenger seat weight sensors
l
Driver and front passenger seat belt
buckle switches
The diagnostic module continuously
monitors the system's readiness. This
begins when the ignition switch is turned
to the ON position and continues while
the vehicle is being driven.
Non-activation of side and curtain air
bag
The side and curtain air bags will not
normally inflate in the following cases:
l
Collision from the rear.
q
Air Bag/Front Seat Belt
Pretensioner System Warning Light
l
Collision from the front, but it may
deploy the front air bags.
If the air bag/front seat belt pretensioner
system is working properly, the warning
light illuminates when the ignition switch
is turned to the ON position or after the
engine is cranked. The warning light turns
off after a specified period of time.
2-56
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page69
Tuesday, May 9 2006 10:43 AM
Black plate (69,1)
Essential Safety Equipment
SRS Air Bags
l
A system malfunction is indicated if the
warning light constantly flashes,
Front passenger air bag deactivation
indicator light does not illuminate
when the ignition switch is turned to
the ON position or does not illuminate
as indicated in the chart. For more
details about this indicator light and
this chart, refer to “Front passenger
constantly illuminates or does not
illuminate at all when the ignition switch
is turned to the ON position. If either of
these occur, consult an Authorized Mazda
Dealer as soon as possible. The system
may not work in an accident.
WARNING
WARNING
Never tamper with the air bag/
pretensioner systems and always have
an Authorized Mazda Dealer perform
all servicing and repairs:
Self-servicing or tampering with the
systems is dangerous. An air bag/
pretensioner could accidentally
activate or become disabled causing
serious injury or death.
Do not operate a vehicle with damaged
air bag/seat belt pretensioner system
components:
Expended or damaged air bag/seat
belt pretensioner system components
must be replaced after any collision
which caused them to deploy or
damage them. Only a trained
Authorized Mazda Dealer can fully
evaluate these systems to see that they
will work in any subsequent accident.
Driving with an expended or damaged
air bag or pretensioner unit will not
afford you the necessary protection in
the event of any subsequent accident
which could result in serious injury or
death.
qMaintenance
The air bag systems do not require regular
maintenance. But if any of the following
occurs, take your vehicle to an Authorized
Mazda Dealer as soon as possible:
l
The air bag system warning light
flashes.
Do not remove interior air bag parts:
Removing any components such as the
front seats, front dashboard, the
steering wheel or parts on the front
and rear window pillars and along the
roof edge, containing air bag parts or
sensors is dangerous. These parts
contain essential air bag components.
The air bag could accidentally activate
and cause serious injuries. Always
have an Authorized Mazda Dealer
remove these parts.
l
The air bag system warning light
remains illuminated.
l
The air bag system warning light does
not illuminate when the ignition switch
is turned to the ON position.
l
The air bags have deployed.
2-57
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page70
Tuesday, May 9 2006 10:43 AM
Black plate (70,1)
Essential Safety Equipment
SRS Air Bags
WARNING
Dispose of the air bag properly:
Improper disposal of an air bag or a
vehicle with live air bags in it can be
extremely dangerous. Unless all safety
procedures are followed, injury can
result. Ask an Authorized Mazda
Dealer how to safely dispose of an air
bag or how to scrap an air bag
equipped vehicle.
NOTE
If it becomes necessary to have the
components or wiring system for the
supplementary restraint system
modified to accommodate a person with
certain medical conditions in
accordance with a certified physician,
contact an Authorized Mazda Dealer,
refer to “Customer Assistance (U.S.A.)”
(page 9-2).
2-58
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page71
Tuesday, May 9 2006 10:43 AM
Black plate (71,1)
Knowing Your Mazda
3
Explanation of basic operations and controls; opening/closing and adjustment
of various parts.
íSome models.
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page72
Tuesday, May 9 2006 10:43 AM
Black plate (72,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
Advanced Keysí
The advanced keyless functions (advanced keyless entry and start system) enables the
following operations while the advanced key is being carried (page 3-7).
l
Locking/unlocking the doors and the trunk lid without operating the key.
l
Starting the engine without operating the key.
The advanced key enables additional functions other than those with the advanced keyless
functions (page 3-13).
l
The following operations are possible using the keyless entry system from a distance
(Lock/Unlock/Panic button):
l
Locking/unlocking the doors and the trunk lid.
Opening the power windows.
Turning on the alarm.
l
l
l
Locking/unlocking the doors and the trunk lid, or starting the engine using the auxiliary
key.
WARNING
Do not leave the keys in your vehicle with children and keep them in a place where
your children will not find or play with them:
Leaving children in a vehicle with the key is dangerous. This could result in someone
being badly injured or even killed. These new kinds of keys are fascinating to
children. They could play with power windows or other controls, or even make the
vehicle move.
Radio waves from the advanced key may affect medical equipment such as
pacemakers:
Before using the advanced key near people who use medical equipment, ask the
medical equipment manufacturer or your physician if radio waves from the advanced
key will affect the equipment.
NOTE
l
The driver must carry the advanced key to ensure the system functions properly.
l
starting.
l
prevention of vehicle and vehicle contents theft.
3-2
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page73
Tuesday, May 9 2006 10:43 AM
Black plate (73,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
Your Mazda has two kinds of keys.
Master key
Panic button
Valet key
Auxiliary key
Lock button
Unlock button
Operation indicator light
Key code number plate
Here's what the keys are used for:
Lock Operates
Ignition switch and steering column lock
Driver's door
Master key
Valet key
Yes
Yes
Yes
Yes
Glove box
Yes (auxiliary key)
Yes
No
Trunk lid
No
If you must leave your vehicle with another person, such as a parking attendant, protect
items by locking the glove box, and trunk lid with the master key. Keep that key and give
the other person only the valet key.
A code number is stamped on the plate attached to the key set; detach this plate and store it
in a safe place (not in the vehicle) for use if you need to make a replacement key.
Also write down the code number and keep it in another safe and handy place, but not in
the vehicle.
If your key is lost, consult your Authorized Mazda Dealer with the code number ready.
3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page74
Tuesday, May 9 2006 10:43 AM
Black plate (74,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
CAUTION
l
Because the advanced key uses low-intensity radio waves, it may not function
correctly under the following conditions:
l
The advanced key is carried with communication devices such as cellular phones.
The advanced key contacts or is covered by a metal object.
The advanced key is near electronic devices such as personal computers.
Non-Mazda genuine electronic equipment is installed in the vehicle.
There is equipment which discharges radio waves near the vehicle.
If the vehicle is near equipment such as wireless pay devices installed at certain gas
l
l
l
l
l
stations.
l
l
The advanced key may consume battery power excessively if it receives high-
intensity radio waves. Do not place the advanced key near electronic devices such as
televisions or personal computers.
To avoid damage to the advanced key, DO NOT:
l
Drop the advanced key.
Get the advanced key wet.
Disassemble the advanced key.
Expose the advanced key to high temperatures on places such as the dashboard or
l
l
l
hood, under direct sunlight.
Place heavy objects on the advanced key.
Put the advanced key in an ultrasonic cleaner.
Put any magnetized objects close to the advanced key.
l
l
l
NOTE
l
Battery life is about one year. Replace the battery when the KEY indicator light
(green) flashes in the instrument cluster.
Refer to Advanced Key Battery Dead Warning on page 3-17.
l
Additional advanced keys can be obtained at an Authorized Mazda Dealer. Up to 6
advanced keys can be used with the advanced keyless functions per vehicle.
3-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page75
Tuesday, May 9 2006 10:43 AM
Black plate (75,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
Replacing the battery at an Authorized
Mazda Dealer is recommended to prevent
damage to the advanced key. If replacing
the battery by yourself, follow the
instruction below.
qAdvanced Key Maintenance
CAUTION
l
Make sure the battery is installed
with the correct pole facing upward.
Battery leakage could occur if it is
not installed correctly.
Replacing the advanced key battery
1. Pull out the auxiliary key.
l
When replacing the battery, be
careful not to bend the electrical
terminals or get oil on them. Also be
careful not to get dirt in the
transmitter as it could be damaged.
l
There is the danger of explosion if
the battery is not correctly replaced.
l
Replace only with the same type
battery (CR2025 or equivalent).
l
Dispose of used batteries according
to the following instructions.
2. Release the cap using a flathead
screwdriver, then rotate and remove the
cap.
l
Insulate the plus and minus
terminals of the battery using
cellophane or equivalent tape.
Never disassemble.
l
l
Never throw the battery into fire
or water.
Never deform or crush.
l
The following conditions indicate that the
battery power is low:
Cap
l
The KEY indicator light (green) flashes
in the instrument cluster when the
engine is turned off.
l
The system does not operate and the
operation indicator light does not flash
when the buttons are pressed.
CAUTION
Do not turn the cap excessively. The
cap may be damaged.
l
The system's operational range is
reduced.
3-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page76
Tuesday, May 9 2006 10:43 AM
Black plate (76,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
3. Insert a flathead screwdriver into the
crack and press the battery out.
qService
If you have a problem with the advanced
keyless functions, consult an Authorized
Mazda Dealer.
If your advanced key is lost or stolen,
bring all remaining advanced keys to an
Authorized Mazda Dealer as soon as
possible for a replacement and to make
the lost or stolen advanced key
inoperative.
CAUTION
4. Insert the new battery (CR2025 or
equivalent) with the positive pole (
facing the ( ) mark on the cap.
Radio equipment like this is governed
by laws in the United States.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's
authority to operate the equipment.
)
5. Rotate and close the cap.
Cap
6. Reinsert the auxiliary key.
3-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page77
Tuesday, May 9 2006 10:43 AM
Black plate (77,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
NOTE
Operation Using Advanced
Keyless Functions
The system may not operate if you are
too close to the windows, door handles,
or trunk lid.
qOperational Range
The system operates only when the driver
is in the vehicle or within operational
range while the advanced key is being
carried.
Starting the engine
The operational range for starting the
engine includes nearly the entire cabin
area except for the trunk.
NOTE
Interior transmitter
When the battery power is low, or in
places where there are high-intensity
radio waves or noise, the operational
range may become narrower or the
system may not operate.
Locking, unlocking the doors and the
trunk lid
Operational range
The operational range for locking/
unlocking the doors is an area of up to 80
cm (2.6 ft) from the center of the front
door handles.
The operational range for locking/
unlocking the trunk lid is an area of up to
80 cm (2.6 ft) from the center of the trunk
lid.
Exterior transmitter
Operational range
3-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page78
Tuesday, May 9 2006 10:43 AM
Black plate (78,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
qLocking, Unlocking with Request
NOTE
Switch
l
The trunk is out of the operational
All doors and the trunk lid can be locked/
unlocked by pressing the request switch
on the front doors or the trunk lid while
the advanced key is being carried.
Front doors
range, however, starting the engine
may be possible.
l
The engine may not start if the
advanced key is placed in the
following areas:
l
Around the dashboard
In the storage compartments such
l
as the glove box
On the rear parcel shelf
l
l
Starting the engine may be possible
even if the advanced key is outside
of the vehicle and extremely close to
a door and window, however, always
start the engine from the driver's seat.
If the vehicle is started and the
Request switch
advanced key is not in the vehicle,
the vehicle will not restart after it is
shut off and the ignition switch is
turned to the lock position.
Trunk lid
Request switch
l
If the advanced key is detected
within operational range, the
operation indicator light flashes
momentarily.
To lock
To lock the doors and the trunk lid, press
the request switch. A beep sound will be
heard once and the hazard warning lights
will flash once.
3-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page79
Tuesday, May 9 2006 10:43 AM
Black plate (79,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
To unlock
NOTE
Driver's door request switch
l
The setting can be changed so that
the doors and the trunk lid are locked
automatically without pressing the
request switch (page 3-18).
To unlock the driver's door, press the
request switch. A beep sound will be
heard twice and the hazard warning lights
will flash twice.
To unlock all doors and the trunk lid,
press the request switch again within 5
seconds and two more beep sounds will
be heard.
(Auto-lock function)
A beep sound is heard when all
doors and the trunk lid are closed
while the advanced key is being
carried. All doors and the trunk lid
are locked automatically after about
3 seconds when the advanced key is
out of the operational range. Also,
the hazard warning lights flash once.
(Even if the driver is in the
Front passenger door/trunk lid request
switch
To unlock the doors and the trunk lid,
press the request switch. A beep sound
will be heard twice and the hazard
warning lights will flash twice.
operational range, all doors and the
trunk lid are locked automatically
after about 30 seconds.)
NOTE
If you are out of the operational
range before the doors and the trunk
lid are completely closed or another
advanced key is left in the vehicle,
the auto-lock function will not work.
Always make sure that all doors and
the trunk lid are locked before
leaving the vehicle.
l
The request switch on the trunk lid
can also set so that it cannot be
unlocked with the valet key, refer to
Trunk Security (page 3-31).
l
The request switch on the driver's
door can be used to close the power
windows, refer to Opening/Closing
the Power Windows from Outside
(page 3-38).
The auto-lock function does not
close the power windows.
l
After unlocking doors and the trunk
lid by pressing the request switch, all
doors and the trunk lid will
automatically lock and the hazard
warning light will flash if any of the
following operations are not
l
l
Confirm that all doors and the trunk
lid are securely locked.
All doors and the trunk lid cannot be
locked when any door or the trunk
lid is open.
performed within about 30 seconds.
l
A beep sound is heard for
l
A door or the trunk lid is opened.
The auxiliary key is inserted into
confirmation when the doors and the
trunk lid are locked/unlocked using
the request switch. If your prefer, the
beep sound can be turned off (page
l
the ignition switch.
The start knob is pushed.
l
3-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page80
Tuesday, May 9 2006 10:43 AM
Black plate (80,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
qStarting the Engine
NOTE
Ignition switch positions
If turning the ignition switch is difficult,
jiggle the steering wheel from side to
side.
Without a traditional key, some of the
ignition switch functions are different.
ACC (Accessory)
The steering wheel unlocks and some
electrical accessories will operate.
NOTE
The Advanced Keyless Entry System
does not function in the ACC position,
and the doors will not lock/unlock even
if they have been locked manually or
the advanced key is carried away from
the vehicle.
Start knob
LOCK (Released)
The steering wheel locks to help protect
against theft.
ON
LOCK (Depressed)
This is the normal running position after
the engine is started. The warning lights
(except brakes) should be inspected
before the engine is started (page 5-24).
The ignition switch can be turned to the
ACC position when the KEY indicator
light (green) illuminates in the instrument
cluster.
NOTE
When the ignition switch is turned to
the ON position, the sound of the fuel
pump motor operating near the fuel
tank can be heard. This does not
indicate an abnormality.
WARNING
Before leaving the driver's seat,
always set the parking brake and
make sure the shift lever is in 1 or R:
Leaving the driver's seat without
setting the parking brake and the shift
lever is dangerous. Unexpected vehicle
movement could occur. This could
cause an accident.
START
The engine is started in this position. It
will crank until you release the start knob;
then it returns to the ON position. The
brake warning light can be checked after
the engine is started (page 5-24).
3-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page81
Tuesday, May 9 2006 10:43 AM
Black plate (81,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
Starting the engine
5. Depress the clutch pedal all the way
and shift into neutral.
Keep the clutch pedal depressed while
cranking the engine.
NOTE
l
Engine-starting is controlled by the
spark ignition system.
NOTE
This system meets all Canadian
Interference-Causing Equipment
Standard requirements regulating the
impulse electrical field strength of
radio noise.
The starter will not operate if the clutch
pedal is not depressed all the way.
6. Push the start knob slowly all the way
in.
l
The advanced key must be carried
because the advanced key carries an
immobilizer chip that must
communicate with the engine
controls at short range.
l
When starting the engine, be sure the
start knob is securely attached before
trying to operate it. If the knob
becomes detached from the ignition
switch, re-attach it by pushing it on
to the ignition switch.
7. Verify that the KEY indicator light
(green) illuminates in the instrument
cluster. The KEY warning light (red)
means you cannot continue to start the
engine (page 3-19).
1. Make sure the advanced key is being
carried.
2. Occupants should fasten their seat
belts.
3. Make sure the parking brake is on.
4. Depress the brake pedal.
3-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page82
Tuesday, May 9 2006 10:43 AM
Black plate (82,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
NOTE
CAUTION
In the following cases, the KEY
warning light (red) illuminates and the
engine will not start.
Don't try the starter for more than 10
seconds at a time. If the engine stalls or
fails to start, wait 10 seconds before
trying again. Otherwise, you may
l
The advanced key battery is dead.
damage the starter and drain the battery.
l
The advanced key is out of
operational range.
10. After starting the engine, let it idle for
about 10 seconds.
l
The advanced key is placed in areas
where it is difficult for the system to
detect the signal (page 3-7).
NOTE
l
A key from another manufacturer
similar to the advanced key is in the
operational range.
l
In extremely cold weather, below
18° C (0° F), or after the vehicle
_
has not been driven in several days,
let the engine warm up without
operating the accelerator.
8. Turn the ignition switch to the ACC
position while pushing the start knob
in.
l
Whether the engine is cold or warm,
it should be started without use of
the accelerator.
Turning off the engine
1. Turn the ignition switch from the ON
position to the ACC position.
NOTE
When the engine is turned off and the
ignition switch it turned from the ACC
position to the LOCK position, the
KEY indicator light (green) flashes in
the instrument cluster for about 30
seconds if the battery power of the
advanced key is low. Replace the
battery with a new one.
9. Turn the ignition switch from the ACC
position to the START position and
hold (up to 10 seconds at a time) until
the engine starts.
Refer to Battery Replacement (page
2. Push in the start knob from the ACC
position and turn it to the LOCK
position.
3-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page83
Tuesday, May 9 2006 10:43 AM
Black plate (83,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
Operation Using Advanced
Key Functions
CAUTION
When leaving the vehicle, make sure
the ignition switch is turned to the
LOCK position.
qKeyless Entry System
This system remotely locks and unlocks
the doors and the trunk lid, and opens the
power windows.
NOTE
It can also help you signal for attention.
Press the buttons slowly and carefully.
l
When turning the ignition switch to
the LOCK position, the ignition
switch has to be pushed in from the
ACC position and turned. Without
being pushed in, the ignition switch
stops at the ACC position and the
vehicle battery may be discharged if
the ignition switch is left in the ACC
position. When leaving the vehicle,
make sure the ignition switch is
turned to the LOCK position.
NOTE
l
The keyless entry system is designed
to operate up to about 2.5 m (8 ft)
from the center of the vehicle, but
this may vary due to local
conditions.
l
The system does not operate when
the ignition switch is not in the
LOCK position or the start knob is
pushed in.
l
If the vehicle is left with the ignition
switch not in the LOCK position, a
beep sound is heard and the indicator
light flashes to notify the driver.
Refer to Warning Beep (page 3-16).
l
With the start knob installed in the
LOCK position, the system is fully
operational. If the ignition switch is
not in the LOCK position or the start
knob is pushed in, the system does
not operate.
l
All doors and the trunk lid cannot be
locked by pressing the lock button
while any door or the trunk lid is
open. The hazard warning lights will
also not flash.
l
If the transmitter does not operate
when pressing a button or the
operational range becomes too small,
the battery may be dead. To install a
new battery, refer to Maintenance
(page 3-5).
3-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page84
Tuesday, May 9 2006 10:43 AM
Black plate (84,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
Transmitter
The operation indicator light flashes when
the buttons are pressed.
Lock button
Lock button
To lock the doors and the trunk lid, press
the lock button. A beep sound will be
heard once and the hazard warning lights
will flash once.
Panic button
Unlock button
To confirm that all doors and the trunk lid
have been locked, press the lock button
again within 5 seconds. If they are closed
and locked, the horn will sound.
NOTE
NOTE
l
l
All doors and the trunk lid cannot be
(U.S.A.)
locked when any door or the trunk
lid is open.
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
l
Confirm that all doors and the trunk
lid are locked visually or audibly by
use of the double click.
Unlock button
To unlock the driver's door, press the
unlock button. A beep will be heard twice
and the hazard warning lights will flash
twice.
l
(CANADA)
This device complies with RSS-210
of Industry CANADA. Operation is
subject to the following two
conditions: (1) this device may not
cause interference, and (2) this
device must accept any interference,
including interference that may cause
undesired operation of the device.
To unlock all doors and the trunk lid,
press the unlock button again within 5
seconds and two more beep sounds will
be heard.
NOTE
NOTE
After unlocking with the transmitter, all
doors and the trunk lid will
automatically lock if one of the doors or
the trunk lid is not opened within about
30 seconds.
The unlock button can be used to open
the power windows, but the lock button
cannot be used to close the power
windows. Refer to Opening/Closing the
Power Windows from Outside (page
3-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page85
Tuesday, May 9 2006 10:43 AM
Black plate (85,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
Panic button
qAuxiliary Key Function
If you witness from a distance someone
attempting to break into or damage your
vehicle, pressing the panic button will
activate the vehicle's alarm.
Use the auxiliary key stored in the
advanced key in the event of a dead
transmitter battery or malfunction.
Removing the auxiliary key
Pull out the auxiliary key from the
advanced key.
NOTE
The panic button will work whether any
door or the trunk lid is open or closed.
(Turning on the alarm)
Pressing the panic button for 1 second or
more will trigger the alarm for about 2
minutes and 30 seconds, and the
following will occur:
l
The horn sounds intermittently.
l
The hazard warning lights flash.
NOTE
Locking, unlocking the doors
The doors can be locked/unlocked using
the auxiliary key, refer to Locking,
Unlocking with Key (page 3-26).
However, if the driver is too close to the
vehicle the panic button may not
function.
Locking, unlocking the trunk lid
(Turning off the alarm)
The alarm stops by pressing any button on
the transmitter.
The trunk lid can be locked/unlocked
using the auxiliary key, refer to Locking,
Unlocking with Key (page 3-29).
Starting the engine
The engine can be started with the
auxiliary key, refer to Ignition Switch
(page 5-2).
Locking, unlocking the glove box
The glove box can be locked/unlocked
using the auxiliary key, refer to Glove
Box (page 6-50).
3-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page86
Tuesday, May 9 2006 10:43 AM
Black plate (86,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
qAdvanced Key Removed from
Warning and Beep Sounds
Vehicle Warning Beep
q
System Malfunction Warning Beep
Under the following conditions, a beep
will be heard 3 times and the KEY
warning light (red) will flash continuously
when the start knob has not been returned
to the LOCK position to notify the driver
that the advanced key has been removed.
The KEY warning light (red) will stop
flashing when the advanced key is back
inside the vehicle:
If any malfunction occurs in the advanced
keyless function, the KEY warning light
(red) in the instrument cluster illuminates
continuously and beep sounds will be
heard.
CAUTION
l
The start knob has not been returned to
If the KEY warning light (red) remains
illuminated, do not continue to drive the
vehicle with the advanced keyless
function. Park the vehicle in a safe
place and use the auxiliary key to
continue driving the vehicle. Have the
vehicle inspected at an Authorized
Mazda Dealer as soon as possible.
Refer to Ignition Switch (page 5-2).
the LOCK position, the driver's door is
open, and the advanced key is removed
from the vehicle.
However the beep will be heard
continuously when the start knob is in
the ACC position and the door is open
due to the activation of the warning
beep indicating that the start knob is
not in the LOCK position.
l
The start knob has not been returned to
qStart Knob Not in LOCK
the LOCK position and all the doors
are closed after removing the advanced
key from the vehicle.
Warning Beep
If the start knob is in the ACC position
and the driver's door is opened, a
continuous beep sound will be heard to
notify the driver that the start knob has not
been returned to the LOCK position. In
this case, the keyless entry system does
not operate.
NOTE
Because the advanced key utilizes low-
intensity radio waves, the Advanced
Key Removed From Vehicle Warning
may activate if the advanced key is
carried together with a metal object or it
is placed in a poor signal reception area.
3-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page87
Tuesday, May 9 2006 10:43 AM
Black plate (87,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
qRequest Switch Inoperable
qEngine Start Not Permitted Warning
Warning Beep
Under the following conditions, the KEY
warning light (red) flashes to inform the
driver that the start knob will not rotate to
the ACC position even if it is pushed in
from the LOCK position.
Under the following conditions, if the
request switch for a front door or the trunk
lid is pressed while the advanced key is
being carried, a beep will be heard 3 times
to indicate that the front doors and the
trunk lid cannot be locked.
l
The advanced key battery is dead.
l
The advanced key is not within
l
There is a separate advanced key in the
vehicle.
operational range.
l
The advanced key is placed in areas
l
A door or the trunk lid is open (door
ajar included).
where it is difficult for the system to
detect the signal (page 3-7).
l
The start knob has not been returned to
the LOCK position.
l
A key from another manufacturer
similar to the advanced key is in the
operational range.
l
The auxiliary key is inserted into the
ignition switch.
qAdvanced Key Battery Dead
Warning
When the start knob is returned to the
ACC or LOCK position from the ON
position, the KEY indicator light (green)
flashes for approximately 30 seconds
indicating that the remaining battery
power is low. Replace with a new battery
before the advanced key becomes
unusable.
Refer to Advanced Key Maintenance
(page 3-5).
NOTE
The advanced key can be set so that the
KEY indicator light (green) does not
flash even if the battery power is low.
Refer to Setting Change (page 3-18).
3-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page88
Tuesday, May 9 2006 10:43 AM
Black plate (88,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
Setting Change (Function Customization)
The following function settings are possible. These settings can only be changed by an
Authorized Mazda Dealer.
At Initial
Setting
After Setting
Change
Setting
Function
Advanced key battery dead KEY indicator light (green) flashes to indicate
Activated
Activated
Deactivated
indicator
that the advanced key battery power is low.
Lock/unlock operation
A beep sound is heard to confirm that all doors or
Deactivated
Activated
confirmation beep sound*1 the trunk lid have been locked/unlocked.
When all doors and the trunk lid are closed and
the advanced key is being carried and out of
operational range, all doors and the trunk lid
Autolock function
automatically lock after 3 seconds.
Deactivated
(Even if the driver is in the operational range, all
doors and the trunk lid are locked automatically
after about 30 seconds.)
*1 : When the autolock function is operating, the warning sound will be heard regardless of the setting.
3-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page89
Tuesday, May 9 2006 10:43 AM
Black plate (89,1)
Knowing Your Mazda
Advanced Keyless Entry and Start System
When Warning Indicator/Beep is Activated
Under the following conditions, warning beeps are heard and a warning/indicator light in
the instrument cluster illuminates to notify the driver of improper operation of the
advanced key to prevent theft of the vehicle (page 3-16).
Warning
What to check
When a door is open, a continuous beep sound will be Check whether the start knob has been returned to the
heard.
LOCK position.
When a door is open, 3 beep sounds are heard, and the
KEY warning light (red) in the instrument cluster
flashes.
Check whether the advanced key has been removed
from the vehicle.
When a door is closed, a beep sound is heard 3 times,
and the KEY warning light (red) in the instrument
cluster flashes.
Check whether the advanced key has been removed
from the vehicle.
Check whether the advanced key has been left in the
vehicle.
When attempting to lock the doors, a beep sound is
heard.
Check whether the start knob has been returned to the
LOCK position.
Check whether a door or the trunk lid is open.
The advanced key battery power is low. Replace the
battery with a new one.
Refer to Advanced Key Maintenance on page 3-5.
When the KEY indicator light (green) flashes in the
instrument cluster.
The advanced key is malfunctioning. Park the vehicle in
When the KEY warning light (red) remains illuminated a safe place, and use the auxiliary key to continue
in the instrument cluster.
driving the vehicle. Have the vehicle inspected at an
Authorized Mazda Dealer as soon as possible.
3-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page90
Tuesday, May 9 2006 10:43 AM
Black plate (90,1)
Knowing Your Mazda
Doors and Locks
Your Mazda has two kinds of keys.
Keys
Master key
(Retractable
type key)
WARNING
Do not leave the keys in your vehicle
with children and keep them in a place
where your children will not find or
play with them:
Valet key
Leaving children in a vehicle with the
key is dangerous. This could result in
someone being badly injured or even
killed. These new kinds of keys are
fascinating to children. They could
play with power windows or other
controls, or even make the vehicle
move.
Key code number plate
Here's what the keys are used for:
Lock Operates
Master key Valet key
Ignition switch and
steering column lock
Yes
Yes
Driver's door
Glove box
Trunk lid
Yes
Yes
Yes
Yes
No
No
NOTE
l
If your vehicle is equipped with the
If you must leave your vehicle with
another person, such as a parking
attendant, protect items by locking the
glove box and trunk lid with the master
key. Keep that key and give the other
person only the valet key.
advanced key, refer to Advanced
Keys (page 3-2).
l
Refer to Immobilizer System (page
3-49) for information regarding keys
and engine starting.
l
Refer to Theft-Deterrent System
A code number is stamped on the plate
attached to the key set; detach this plate
and store it in a safe place (not in the
vehicle) for use if you need to make a
replacement key.
regarding keys and the prevention of
vehicle and vehicle contents theft.
NOTE
Write down the code number and keep
it in a separate safe and convenient
place, but not in the vehicle.
If your key is lost, consult your
Authorized Mazda Dealer and have
your code number ready.
3-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page91
Tuesday, May 9 2006 10:43 AM
Black plate (91,1)
Knowing Your Mazda
Doors and Locks
Key extend/retract method (Retractable
type key)
Keyless Entry System (with
Retractable Type Key)
To extend the key, press the release
button.
This system remotely locks and unlocks
the doors and the trunk lid, and opens the
power windows.
It can also help you signal for attention.
Press the buttons slowly and carefully.
CAUTION
To avoid damage to the transmitter, do
not:
l
Drop it.
l
Get it wet.
To retract the key, rotate it into the holder
while pressing the release button.
l
Disassemble it.
l
Expose it to high temperatures on
places such as the dashboard or
hood, under direct sunlight.
3-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page92
Tuesday, May 9 2006 10:44 AM
Black plate (92,1)
Knowing Your Mazda
Doors and Locks
qTransmitter
NOTE
l
The keyless entry system is designed
Lock button
Unlock button
to operate up to about 2.5 m (8 ft)
from the center of the vehicle, but
this may vary due to local
conditions.
l
The system doesn't operate when the
key is in the ignition switch.
Operation
indicator light
l
Doors and the trunk lid cannot be
Panic button
locked by pressing the lock button
while any other door or the trunk lid
is open. Also, the hazard warning
lights will not flash.
NOTE
l
If the transmitter does not operate
l
(U.S.A.)
when pressing a button or the
operation range becomes too small,
the battery may be dead. To install a
new battery, refer to Maintenance
(page 3-23).
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
l
Additional transmitters can be
obtained at an Authorized Mazda
Dealer. Up to 3 transmitters can be
used with the keyless entry system
per vehicle. Bring all transmitters to
an Authorized Mazda Dealer when
additional transmitters are required.
l
(CANADA)
This device complies with RSS-210
of Industry CANADA. Operation is
subject to the following two
conditions: (1) this device may not
cause interference, and (2) this
device must accept any interference,
including interference that may cause
undesired operation of the device.
NOTE
The unlock button can be used to open
the power windows, but the lock button
cannot be used to close the power
windows. Refer to Opening/Closing the
Power Windows from Outside (page
3-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page93
Tuesday, May 9 2006 10:44 AM
Black plate (93,1)
Knowing Your Mazda
Doors and Locks
The operation indicator light flashes when
the buttons are pressed.
Panic button
If you witness from a distance someone
attempting to break into or damage your
vehicle, pressing the panic button will
activate the vehicle's alarm.
Lock button
To lock the doors and the trunk lid, press
the lock button and the hazard warning
lights will flash once.
NOTE
To confirm that all doors and the trunk lid
have been locked, press the lock button
again within 5 seconds. If they are closed
and locked, the horn will sound.
The panic button will work whether any
door or the trunk lid is open or closed.
Turning on the alarm
Pressing the panic button for 1 second or
more will trigger the alarm for about 2
minutes and 30 seconds, and the
following will occur:
NOTE
l
All doors and the trunk lid cannot be
locked when any door or the trunk
lid is open and the key is in the
ignition switch.
l
The horn sounds intermittently.
l
The hazard warning lights flash.
l
Confirm that all doors and the trunk
lid are locked visually or audibly by
use of the double click.
Turning off the alarm
Press any button on the transmitter.
Unlock button
qTransmitter Maintenance
To unlock the driver's door, press the
unlock button and the hazard warning
lights will flash twice.
If the buttons on the transmitter are
inoperable and the operation indicator
light does not flash, the battery may be
dead.
Replace with a new battery before the
transmitter becomes unusable.
To unlock all doors and the trunk lid,
press the unlock button again within 5
seconds.
NOTE
After unlocking with the transmitter, all
doors and the trunk lid will
automatically lock if one of the doors or
the trunk lid is not opened within about
30 seconds.
3-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page94
Tuesday, May 9 2006 10:44 AM
Black plate (94,1)
Knowing Your Mazda
Doors and Locks
2. Insert a small screwdriver into the slot
and push the tab to remove the key
from the transmitter.
CAUTION
l
Install the battery with the positive
pole ( ) facing down. Battery
leakage could occur if it is not
installed correctly.
Tab
l
When replacing the battery, be
careful not to bend the electrical
terminals or get oil on them. Also be
careful not to get dirt in the
transmitter as it could be damaged.
l
There is the danger of explosion if
the battery is not correctly replaced.
l
Replace only with the same type
3. Insert a small screwdriver into the slot
and gently pry open the transmitter.
battery (CR1620 or equivalent).
l
Dispose of used batteries according
to the following instructions.
l
Insulate the plus and minus
terminals of the battery using
cellophane or equivalent tape.
Never disassemble.
l
l
Never throw the battery into fire
and/or water.
Never deform or crush.
l
Replacing the transmitter battery
1. Unfold the key (page 3-20).
4. Press the portion of the battery
indicated by A and remove the battery.
A
3-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page95
Tuesday, May 9 2006 10:44 AM
Black plate (95,1)
Knowing Your Mazda
Doors and Locks
NOTE
CAUTION
If it is difficult to remove the battery by
pressing with a finger, use a small
screwdriver to press out the battery.
Radio equipment like this is governed
by laws in the United States.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's
authority to operate the equipment.
5. Put in the new battery (CR1620 or
equivalent) with the positive pole (
facing down.
)
6. Align the front and back covers and
snap the transmitter shut.
7. Install the key to the transmitter.
qService
If you have a problem with the keyless
entry system, consult an Authorized
Mazda Dealer.
If your transmitter is lost or stolen, bring
all remaining transmitters to an
Authorized Mazda Dealer as soon as
possible for a replacement and to make
the lost or stolen transmitter inoperative.
3-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page96
Tuesday, May 9 2006 10:44 AM
Black plate (96,1)
Knowing Your Mazda
Doors and Locks
qLocking, Unlocking with Key
Door Locks
The driver's door can be locked/unlocked
with the key.
Turn the key toward the front to unlock,
toward the back to lock.
WARNING
Always take all children and pets with
you or leave a responsible person with
them:
Leaving a child or a pet unattended in
a parked vehicle is dangerous. In hot
weather, temperatures inside a vehicle
can become high enough to cause
brain damage or even death.
Unlock
Do not leave the keys in your vehicle
with children and keep them in a place
where your children will not find or
play with them:
Lock
Leaving children in a vehicle with the
key is dangerous. This could result in
someone being badly injured or even
killed. They could play with power
windows or other controls, or even
make the vehicle move.
qLocking, Unlocking with Request
Switch (with Advanced Key)
The doors can be locked/unlocked by
operating the request switch while
carrying the advanced key outside the
vehicle, refer to Operations Using
Advanced Keyless Functions (page 3-7).
Keep all doors locked when driving:
Unlocked doors in a moving vehicle
are dangerous. Passengers can fall out
if a door is accidentally opened and
can more easily be thrown out in an
accident.
qLocking, Unlocking with
Transmitter (with Advanced Key)
The doors can be locked/unlocked by
operating the keyless entry system
transmitter, refer to Keyless Entry System
(page 3-13).
Always close all the windows, lock the
doors and take the key with you when
leaving your vehicle unattended:
Leaving your vehicle unlocked is
dangerous as children could lock
themselves in a hot vehicle, which
could result in death. Also, a vehicle
left unlocked becomes an easy target
for thieves and intruders.
q
Locking, Unlocking with Transmitter
(with Retractable Type Key)
The doors can be locked/unlocked by
operating the keyless entry system
transmitter, refer to Keyless Entry System
(page 3-21).
3-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page97
Tuesday, May 9 2006 10:44 AM
Black plate (97,1)
Knowing Your Mazda
Doors and Locks
qLocking, Unlocking with Door-
qPower Door Locks
Lock Knob
Vehicle lock-out prevention
To lock any door from the inside, push the
door-lock knob.
To unlock, pull it out.
This does not operate the other door
locks.
(With advanced key)
The vehicle lock-out prevention feature
prevents you from locking yourself out of
the vehicle. All doors and the trunk lid
will automatically unlock if they are
locked using the power door locks with
any door or the trunk lid open.
(Without advanced key)
The vehicle lock-out prevention feature
prevents you from locking yourself out of
the vehicle. With the key in the ignition
switch, all doors and the trunk lid will
automatically unlock if they are locked
using the power door locks with any door
or the trunk lid open.
Lock
Unlock
Locking, unlocking with key
All doors and the trunk lid lock
To lock any door with the door-lock knob
from the outside, push the door-lock knob
to the lock position and close the door.
This does not operate the other door
locks.
automatically when the driver's door is
locked with the key. All doors and the
trunk lid unlock when the driver's door is
unlocked and the key is held in the unlock
position for one second or longer.
Door-lock knob
Unlock
Lock
NOTE
When locking the doors this way, be
careful not to leave the key inside the
vehicle.
3-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page98
Tuesday, May 9 2006 10:44 AM
Black plate (98,1)
Knowing Your Mazda
Doors and Locks
Locking, unlocking with transmitter
(with advanced key)
NOTE
Holding the key in the unlocked
All doors and the trunk lid can be locked/
unlocked by operating the keyless entry
system transmitter, refer to Keyless Entry
System (page 3-13).
position in the driver's door lock for
about a second unlocks all doors and
the trunk lid. To unlock only the driver's
door, insert the key into the driver's
door lock and turn the key briefly to the
unlock position and then immediately
return it to the center position.
Locking, unlocking with transmitter
(with retractable type key)
All doors and the trunk lid can be locked/
unlocked by operating the keyless entry
system transmitter, refer to Keyless Entry
System (page 3-21).
Locking, unlocking with door-lock
switch
All doors and the trunk lid lock
qRear Door Child Safety Locks
automatically when LOCK is pushed.
They all unlock when the unmarked part
of the door-lock switch is pushed.
These locks are intended to help prevent
children from accidentally opening the
rear doors. Use them both whenever a
child rides in the vehicle.
If you slide the child safety lock to the
lock position before closing that door, the
door cannot be opened from the inside.
The door can be opened only by pulling
the outside handle.
Unlock
Lock
Lock
Locking, unlocking with request switch
(with advanced key)
Unlock
All doors and the trunk lid can be locked/
unlocked by operating the request switch
while carrying the advanced key outside
the vehicle, refer to Operations Using
Advanced Keyless Functions (page 3-7).
3-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page99
Tuesday, May 9 2006 10:44 AM
Black plate (99,1)
Knowing Your Mazda
Doors and Locks
To unlock the trunk lid, insert the master
key into the key slot and turn it clockwise,
then return it to the center position and
remove it.
Trunk Lid
WARNING
The trunk lid can be locked/unlocked by
inserting the key into the driver's door key
slot, refer to Power Door Locks (page
Never allow a person to ride in the
trunk:
Allowing a person to ride in the trunk
is dangerous. In addition, the person
in the trunk could be seriously injured
or killed during sudden braking or a
collision.
qLocking, Unlocking with Request
Switch (with Advanced Key)
The trunk lid can be locked/unlocked by
operating the request switch while
carrying the advanced key outside the
vehicle, refer to Operations Using
Keep the trunk closed when driving:
Exhaust gas entering the cabin of a
vehicle through an open trunk is
dangerous. This gas contains CO
(carbon monoxide), which is colorless,
odorless, and highly poisonous. If
inhaled, it can cause loss of
Advanced Keyless Functions (page 3-7).
qLocking, Unlocking with
Transmitter (with Advanced Key)
consciousness and death.
The trunk lid can be locked/unlocked by
operating the keyless entry system
transmitter, refer to Keyless Entry System
(page 3-13).
qLocking, Unlocking with Key
To lock the trunk lid, insert the master key
into the key slot and turn it
counterclockwise, then return it to the
center position and remove it.
q
Locking, Unlocking with Transmitter
(with Retractable Type Key)
The trunk lid can be locked/unlocked by
operating the keyless entry system
transmitter, refer to Keyless Entry System
(page 3-21).
Lock
Unlock
qLocking, Unlocking with Door-
Lock Switch
The trunk lid can be locked/unlocked by
operating the door-lock switch, refer to
Power Door Locks (page 3-27).
3-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page100
Tuesday, May 9 2006 10:44 AM
Black plate (100,1)
Knowing Your Mazda
Doors and Locks
Opening the trunk lid
q
Opening and Closing the Trunk Lid
Pull up on the handle.
WARNING
Close the trunk lid, lock the rear
seatbacks and do not allow children to
play inside the vehicle:
Leaving the trunk lid open or leaving
children in the vehicle with the keys is
dangerous. Children could open the
trunk lid and climb inside resulting in
possible injury or death from heat
exposure.
Closing the trunk lid
Always keep the car from being a
tempting place to play by locking rear
seats, doors and the trunk, and
keeping the keys where children can
not play with them:
Grasp the inner handle and pull the trunk
lid down, then push the trunk lid down
until it locks securely. Be careful not to
slam it. Pull up on the trunk lid to make
sure it is secured.
Leaving children or animals
unattended in a parked vehicle is
dangerous. Babies left sleeping and
children who lock themselves in cars
or trunks can die very quickly from
heat prostration. Do not leave your
children or pets alone in a car at any
time. Do not leave the car, the rear
folding seats or the trunk unlocked.
Handle
CAUTION
For vehicles equipped with a rear
spoiler, do not lift the trunk lid by the
spoiler. Lifting up the trunk lid by the
rear spoiler could cause damage to the
rear spoiler and the trunk lid.
3-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page101
Tuesday, May 9 2006 10:44 AM
Black plate (101,1)
Knowing Your Mazda
Doors and Locks
To cancel the security feature, insert the
master key into the lock, turn the key
clockwise to the center position and
remove it.
qTrunk Security
In some situations you may want to
prevent the trunk from being unlocked
when the doors are unlocked with the key.
If you must leave your Mazda with
another person, such as a parking
attendant, protect valuables in the trunk
by locking the trunk with the master key,
or the request switch (with advanced key)
on the trunk lid and giving the other
person only the valet key, which does not
open the trunk.
With master key
To secure the trunk lid, close the trunk,
insert the master key and turn it
counterclockwise. Remove the key.
With request switch (with advanced
key)
NOTE
The trunk lid cannot be secured when
any door or the trunk lid is open.
To secure the trunk lid, press the request
switch on the trunk lid for about 3
seconds. This will lock only the trunk lid.
Request switch
To cancel the security feature, press the
request switch on the trunk lid for about 3
seconds again.
3-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page102
Tuesday, May 9 2006 10:44 AM
Black plate (102,1)
Knowing Your Mazda
Doors and Locks
qTrunk Light
Inside Trunk Release Lever
The trunk light is on when the lid is open
and off when it's closed.
Your vehicle is equipped with an inside
trunk release lever that provides a means
of escape for children and adults in the
event they become locked inside the
trunk.
No matter how careful adults might be
with keys and locking their cars, parents
should be aware that children may be
tempted to play around vehicles and use
the trunk as a hiding place.
Adults are advised to familiarize
themselves with the operation and
location of the inside trunk release lever
so that all children can be told about it in
an appropriate way, keeping in mind that
most vehicles don't have such levers.
NOTE
To prevent the battery from being
discharged, do not leave the trunk open
for a long period when the engine is not
running.
3-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page103
Tuesday, May 9 2006 10:44 AM
Black plate (103,1)
Knowing Your Mazda
Doors and Locks
qOpening the Trunk Lid from the
WARNING
Inside
Slide the inside trunk release lever in the
direction of the arrow. The lever is made
of material that will glow for hours in the
darkness of the trunk following a brief
exposure to ambient light.
Close the trunk lid and do not allow
children to play inside the vehicle:
Leaving the trunk lid open or leaving
children in the vehicle with the keys is
dangerous. Children could open the
trunk lid and climb inside resulting in
possible injury or death from heat
exposure.
The inside trunk release lever is located
on the inside of the trunk lid.
Open
Always keep the car from being a
tempting place to play by locking
doors and the trunk, and keeping the
keys where children can not play with
them:
Leaving children or animals
unattended in a parked vehicle is
dangerous. Babies left sleeping and
children who lock themselves in cars
or trunks can die very quickly from
heat prostration. Do not leave your
children or pets alone in a car at any
time. Do not leave the car or the trunk
unlocked.
3-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page104
Tuesday, May 9 2006 10:44 AM
Black plate (104,1)
Knowing Your Mazda
Doors and Locks
qOperating the Power Windows
Power Windows
The ignition switch must be in the ON
position for the power windows to
operate.
NOTE
l
Each passenger window can be
operated with each door switch when
the power window lock switch on
the driver's door is in the unlocked
position (page 3-37).
WARNING
Make sure the opening is clear before
closing a window:
l
Each passenger window can also be
operated by the power window
master control switches on the
driver's door.
Closing power windows are
dangerous. A person's hands, head, or
even neck could be caught by the
window and result in serious injury or
even death.
Master control switches
Driver's window
This warning applies especially to
children.
Left rear window
Always lock all passenger power
windows with the power window lock
switch on the driver's side while
children are in the vehicle, and never
allow children to play with power
window switches:
Front passenger's
window
Right rear window
Leaving the power window switches
unlocked while children are in the
vehicle is dangerous. Power window
switches that are not locked with the
power window lock switch would allow
children to operate power windows
unintentionally which could result in
serious injury if a child's hands, head
or neck becomes caught by the
window.
l
The following functions can be
performed for each power window
using the power window master
control switches on the driver's door
or each door switch.
l
Manual opening/closing
Auto-opening/closing
Two-step down function
l
l
CAUTION
To prevent burning out the fuse and
damaging the power window system,
do not open or close more than three
windows at once.
3-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page105
Tuesday, May 9 2006 10:44 AM
Black plate (105,1)
Knowing Your Mazda
Doors and Locks
Manual opening/closing
NOTE
To open the window to the desired
position, lightly hold down the switch.
To close the window to the desired
position, lightly pull up the switch.
If the battery was disconnected during
vehicle maintenance, or for other
reasons such as a switch continues to be
operated after the window is fully open/
close, the windows will not fully open
and close automatically. Re-
Master control switches
Close
initialization of the automatic function
on each passenger window cannot be
performed using the master control
switches. Carry out the following
procedure on each door switch to
resume operation:
Open
1. Turn the ignition switch to the ON
position.
2. Press the switch and fully open the
window.
Front/rear passenger switch
3. Pull up the switch to fully close the
window and continue holding the
switch for about 2 seconds after the
window fully closed.
Close
Open
After the system has been re-initialized,
each passenger window can be fully
opened or closed automatically using
the master control switches.
Two-step down function
Auto-opening/closing
With the window completely closed, press
the switch lightly and the window will
open and stop about 3 cm (1 in) from the
top.
To fully open the window automatically,
press the switch completely down.
To fully close the window automatically,
pull the switch completely up.
If you continue to press and hold the
switch, the window will resume opening
all the way.
To stop the window partway, pull or press
the switch in the opposite direction and
then release it.
3-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page106
Tuesday, May 9 2006 10:44 AM
Black plate (106,1)
Knowing Your Mazda
Doors and Locks
NOTE
NOTE
l
Pressing the power window switch once
when the window is fully closed will
only open it about 3 cm (1 in) to allow
convenient ventilation of the cabin.
The two-step down function cannot
be canceled if the procedure is not
completed within the specified times,
or the procedure is changed along
the way. To redo the procedure, first
turn the ignition switch to the LOCK
position and proceed from the
beginning.
Canceling the two-step down function
To cancel the two-step down function for
each passenger window, carry out the
following procedure using the master
control switches.
l
If you are unable to cancel the
function despite carrying out the
cancellation procedure, consult an
Authorized Mazda Dealer.
1. Turn the ignition switch to the ON
position and complete the following
procedure within 5 seconds:
Restoring the two-step down function
Press the power window switch 2 times
firmly, then pull it 2 times firmly.
With the two-step down function in the
canceled state, repeat the previous
procedure for canceling the function on
each door switch and it will be restored.
Master control switches
Driver's window
NOTE
Left rear window
If you are unable to restore the function
despite doing the restore procedure,
consult an Authorized Mazda Dealer.
Front passenger's
window
Jam-safe window
Right rear window
If a person's hands, head or an object
blocks the window during the manual
closing operation or the auto-closing
operation, the window will stop and open
halfway.
2. Turn the ignition switch to the LOCK
position.
3. With the ignition switch in the LOCK
position, and within 40 seconds, turn
the ignition switch to the ON position
and complete the following procedure
within 5 seconds:
Press the power window switch 2 times
firmly, then pull 2 times firmly.
3-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page107
Tuesday, May 9 2006 10:44 AM
Black plate (107,1)
Knowing Your Mazda
Doors and Locks
NOTE
WARNING
l
For engine-off operation of the
Make sure nothing blocks the window
just before it reaches the fully closed
position or while fully holding up the
power window switch:
power window, the switch must be
held up firmly throughout window
closure because the auto-closing
function will be inoperable.
Blocking the power window just
before it reaches the fully closed
position or while fully holding up the
power window switch is dangerous.
In this case, the jam-safe function
cannot prevent the window from
stopping. If fingers are caught, serious
injuries could occur.
l
The two-step down function is
inoperable during engine-off
operation.
qPower Window Lock Switch
With the lock switch in the unlocked
position, all power windows on each door
can be operated.
NOTE
With the lock switch in the locked
position, only the driver's side power
window can be operated.
Depending on driving conditions, a
closing power window could stop and
start opening when the window feels a
shock that is similar to something
blocking it.
Locked position
In the event the jam-safe function
activates and the power window cannot
be closed automatically, pull and hold
the switch fully and the window will
close.
Unlocked position
Engine-off power window operation
The power window can be operated for
about 40 seconds after the ignition switch
is turned from the ON position to the
ACC or LOCK position with all doors
closed. If either front door is opened, the
power window will be inoperable.
3-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page108
Tuesday, May 9 2006 10:44 AM
Black plate (108,1)
Knowing Your Mazda
Doors and Locks
WARNING
WARNING
Unless a passenger needs to operate a
power window, keep the power window
lock switch in the locked position:
Unintentional power window
operation is dangerous. A person's
hands, head, or neck could be caught
by the window and result in serious
injury.
Make sure the opening is clear before
closing a window:
Closing power windows are
dangerous. A person's hands, head, or
even neck could be caught by the
window and result in serious injury or
even death.
This warning applies especially to
children.
NOTE
NOTE
When the power window lock switch is
in the locked position, the light on each
power window switch, except for the
driver's power window switch, turns
off. The light may be difficult to see
depending on the surrounding
brightness.
l
The power windows cannot be
opened or closed from outside the
vehicle under the following
condition:
l
A door or the trunk lid is opened.
The key is inserted into the
l
ignition switch.
(With advanced key)
l
qOpening/Closing the Power
The start knob is pushed into the
ignition switch.
Windows from Outside
All power windows can be opened or
closed from outside the vehicle after the
doors and the trunk lid are closed.
The power windows may be operated
when the power window lock switch on
the driver's door is in the lock or unlocked
position.
l
The power windows may not close
completely under the following
conditions:
l
The vehicle battery is weak
(starter motor is too weak to start
the engine).
Extreme cold conditions.
l
If the power windows cannot be
closed completely, operate each
power window switch from inside
the vehicle. After closing the
windows from outside the vehicle,
verify that they are completely
closed.
3-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page109
Tuesday, May 9 2006 10:44 AM
Black plate (109,1)
Knowing Your Mazda
Doors and Locks
Auto-Opening
Advanced key
Because nobody likes getting into a very
hot car, we have introduced a way to get a
head start on cooling it, even before you
put your seat belts on and insert your key
in the ignition. If you see the vehicle is in
a secure area, you can open the all
windows as you approach the vehicle to
get the air moving before you even step
into the hot vehicle.
Lock button
Panic button
Unlock button
WARNING
Retractable type key
Use the auto-window function only
when you can see the vehicle and it is
in a secure area:
Do not let children play with your
keys. If they open the window without
your knowing, the open windows are
an even bigger invitation to a thief
than leaving the doors unlocked.
Lock button
Unlock button
The windows can be opened for
ventilating the cabin before getting in the
vehicle.
Panic button
To stop this operation, press the unlock
button.
With unlock button (Keyless entry
system)
Press and hold the unlock button on the
transmitter. After the doors and the trunk
lid are unlocked, the windows fully open
automatically.
NOTE
l
The window opening operation also
can be stopped by pressing the lock
button or panic button. However,
pressing these buttons will operate
their functions.
l
The lock button cannot be used to
close the power windows.
With key
1. Insert the key in the driver's door key
cylinder.
3-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page110
Tuesday, May 9 2006 10:44 AM
Black plate (110,1)
Knowing Your Mazda
Doors and Locks
2. Turn the key toward the front and hold
it. After the doors and the trunk lid are
unlocked, the windows fully open
automatically.
With key
1. Insert the key in the driver's door key
cylinder.
2. Turn the key toward the back and hold
it. After the doors and the trunk lid are
locked, the windows close while the
key is turned.
Open
To stop this operation, turn the key to the
center position, then turn it toward the
front again.
Close
With request switch on the driver's
door (Advanced key)
NOTE
The window opening operation also can
be stopped by turning the key toward
the back. However, the doors and the
trunk lid will lock.
1. If the doors and the trunk lid are
locked, unlock them.
2. Press and hold the request switch on
the driver's door. After the doors and
the trunk lid are locked, the windows
close while the request switch is
pressed.
Closing
The windows can be closed in case they
are left open after getting out of the
vehicle.
NOTE
(With advanced key)
been activated, the doors and the trunk
lid automatically lock as you walk away
from the vehicle, however, the power
windows cannot be closed. When
leaving the vehicle, close the windows
using the power window switch inside
the vehicle, the key, or a request switch.
Request switch
3-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page111
Tuesday, May 9 2006 10:44 AM
Black plate (111,1)
Knowing Your Mazda
Doors and Locks
qFuel-Filler Lid
Fuel-Filler Lid and Cap
To open, pull up the remote fuel-filler lid
release.
WARNING
When removing the fuel cap, loosen
the cap slightly and wait for any
hissing to stop. Then remove it:
Fuel spray is dangerous. Fuel can
burn skin and eyes and cause illness if
ingested. Fuel spray is released when
there is pressure in the fuel tank and
the fuel cap is removed too quickly.
Remote fuel-filler
lid release
Before refueling, stop the engine, and
always keep sparks and flames away
from the filler neck:
Fuel vapor is dangerous. It could be
ignited by sparks or flames causing
serious burns and injuries.
qFuel-Filler Cap
To remove the filler cap, turn it
counterclockwise.
Additionally, use of the incorrect fuel
filler cap or not using a fuel filler cap
may result in fuel leak, which could
result in serious burns or death in an
accident.
To close the filler cap, turn it clockwise
until it clicks.
Close
CAUTION
Always use only a genuine Mazda fuel
cap or an approved equivalent,
Open
available at an Authorized Mazda
Dealer. The wrong cap can result in a
serious malfunction of the fuel and
emission control systems. It may also
cause the check engine light in the
instrument cluster to illuminate.
3-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page112
Tuesday, May 9 2006 10:44 AM
Black plate (112,1)
Knowing Your Mazda
Doors and Locks
Hood
CAUTION
Make sure the fuel-filler cap is
tightened securely. The check engine
light may illuminate when the cap isn't
tightened securely. If the light remains
on (even after you have tightened the
cap securely, driven, and restarted the
engine several times), it may indicate a
different problem. Contact an
WARNING
Always check that the hood is closed
and securely locked:
A hood that is not closed and securely
locked is dangerous as it could fly
open while the vehicle is moving and
block the driver's vision which could
result in a serious accident.
Authorized Mazda Dealer as soon as
possible.
qOpening the Hood
1. With the vehicle parked, pull the
release handle to unlock the hood.
2. Slide the hood latch to the right and lift
the hood.
3-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page113
Tuesday, May 9 2006 10:44 AM
Black plate (113,1)
Knowing Your Mazda
Doors and Locks
3. Grasp the support rod in the padded
area and secure it in the stay hole
indicated by the arrow to hold the hood
open.
Moonroofí
The moonroof can be opened or closed
electrically only when the ignition switch
is in the ON position.
Slide switch
Pad
Clip
Support rod
Tilt switch
qClosing the Hood
1. Check under the hood area to make
certain all filler caps are in place and
all loose items (e.g. tools, oil
WARNING
Do not let passengers stand up or
extend part of the body through the
open moonroof while the vehicle is
moving:
Extending the head, arms, or other
parts of the body through the
moonroof is dangerous. The head or
arms could hit something while the
vehicle is moving. This could cause
serious injury or death.
containers, etc.) have been removed.
2. Insert the support rod in its clip while
holding up the hood. Verify that the
support rod is secured in the clip before
closing the hood.
3. Close the hood so that it locks securely.
Make sure the opening is clear before
closing the moonroof:
A closing moonroof is dangerous. The
hands, head, or even neck of a person
―especially a child― could be caught
in it as it closes, causing serious injury
or even death.
íSome models.
3-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page114
Tuesday, May 9 2006 10:44 AM
Black plate (114,1)
Knowing Your Mazda
Doors and Locks
qSlide Operation
NOTE
To open to any position, press the rear of
the switch.
After washing your Mazda or after it
rains, wipe the water off the moonroof
before operating it to avoid water
penetration which could cause rust and
water damage to your headliner.
To close, press the front of the slide
switch.
qTilt Operation
The rear of the moonroof can be tilted
open to provide more ventilation.
To tilt, push the rear of the tilt switch.
To close, push the front of the tilt switch.
Open
Close
qSunshade
The sunshade can be opened and closed
by hand.
Tilt up
Close
The sunshade opens automatically when
the moonroof is opened, but must be
closed by hand.
Sunshade
3-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page115
Tuesday, May 9 2006 10:44 AM
Black plate (115,1)
Knowing Your Mazda
Doors and Locks
CAUTION
The sunshade does not tilt. To avoid
damaging the sunshade, do not push up
on it.
3-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page116
Tuesday, May 9 2006 10:44 AM
Black plate (116,1)
Knowing Your Mazda
Security System
Immobilizer System (with
Advanced Key)
CAUTION
Do not allow the following when
starting the engine with the auxiliary
key due to an advanced key dead
battery or other malfunction. Otherwise
the signal from the auxiliary key will
not be received correctly and the engine
may not start.
The immobilizer system allows the engine
to start only with an advanced key the
system recognizes.
If someone attempts to start the engine
with an unrecognized key, the engine will
not start, thereby helping to prevent the
theft of your vehicle.
l
Metal parts of other keys or metal
objects touch the key grip.
l
Spare auxiliary keys or keys for
other vehicles equipped with an
immobilizer system touch or come
near the auxiliary key.
CAUTION
l
Radio equipment like this is
governed by laws in the United
States.
Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user's authority to operate
the equipment.
l
Equipment containing electronic
components or cards with magnetic
strips such as credit cards come near
the auxiliary key.
NOTE
l
To avoid damage to the key, do not:
l
(U.S.A.)
l
Drop the key.
Get the key wet.
Expose the key to any kind of
magnetic field.
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
l
l
l
Expose the key to high
temperatures on places such as the
dashboard or hood, under direct
sunlight.
l
(CANADA)
This device complies with RSS-210
of Industry CANADA. Operation is
subject to the following two
conditions: (1) this device may not
cause interference, and (2) this
device must accept any interference,
including interference that may cause
undesired operation of the device.
3-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page117
Tuesday, May 9 2006 10:44 AM
Black plate (117,1)
Knowing Your Mazda
Security System
qOperation
NOTE
Arming
l
The engine may not start and the
security indicator light may
The system is armed when the ignition
switch is turned from the ON position to
the ACC or LOCK position. The security
indicator light in the instrument cluster
flashes every 2 seconds until the system is
disarmed.
illuminate or flash if the advanced
key is placed in an area where it is
difficult for the system to detect the
signal, such as on the dashboard, or
in the glove box. Move the advanced
key to another place, turn the
ignition switch to the LOCK
position, and then restart the engine.
l
Signals from a TVor radio station, or
from a transceiver or a mobile
telephone could interfere with your
immobilizer system. If you are using
the proper advanced key and the
engine fails to start, check the
Disarming
The system is disarmed when the ignition
switch is turned to the ON position with
the registered advanced key.
The security indicator light illuminates for
about 3 seconds and goes out.
security indicator light. If the
indicator light is flashing, turn the
ignition switch to the ACC or LOCK
position and wait for a while, then
restart the engine. If it doesn't start
after 3 or more tries, contact an
Authorized Mazda Dealer.
If the engine doesn't start with the correct
ignition key, and the security indicator
light keeps illuminating or flashing, the
system may have a malfunction. Consult
an Authorized Mazda Dealer.
l
If the security indicator light flashes
continuously while you are driving,
don't shut off the engine. Go to an
Authorized Mazda Dealer and have
it checked. If the engine is shut off
while the indicator light is flashing,
you won't be able to restart it.
l
Since the electronic codes are reset
when repairing the immobilizer
system, the advanced key (including
auxiliary key) are needed. Bring all
the advanced keys (including
auxiliary keys) to an Authorized
Mazda Dealer.
3-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page118
Tuesday, May 9 2006 10:44 AM
Black plate (118,1)
Knowing Your Mazda
Security System
qMaintenance
qModification and Add-On
Equipment
If you have a problem with the
immobilizer system or the key, consult an
Authorized Mazda Dealer.
Mazda cannot guarantee the immobilizer
system's operation if the system has been
modified or if any add-on equipment has
been installed to it.
NOTE
l
The advanced keys (including
CAUTION
auxiliary key) carry a unique
electronic code. For this reason, and
to assure your safety, obtaining a
replacement advanced key (including
auxiliary key) requires some waiting
time. They are only available
through an Authorized Mazda
Dealer.
To avoid damage to your vehicle, do
not modify the system or install any
add-on equipment to the immobilizer
system or the vehicle.
l
Always keep a spare advanced key
in case one is lost. If an advanced
key is lost, consult an Authorized
Mazda Dealer as soon as possible.
l
If you lose an advanced key
(including auxiliary key), an
Authorized Mazda Dealer will reset
the electronic codes of your
remaining advanced keys (including
auxiliary keys) and immobilizer
system. Bring all the remaining
advanced keys (including auxiliary
keys) to an Authorized Mazda
Dealer to reset.
Starting the vehicle with a key that
has not been reset is not possible.
3-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page119
Tuesday, May 9 2006 10:44 AM
Black plate (119,1)
Knowing Your Mazda
Security System
Immobilizer System
CAUTION
(without Advanced Key)
When starting the engine do not allow
the following, as the engine may not
start due to the electronic signal from
the ignition key not being transmitted
correctly.
The immobilizer system allows the engine
to start only with a key the system
recognizes.
If someone attempts to start the engine
with an unrecognized key, the engine will
not start, thereby helping to prevent the
theft of your vehicle.
l
A key ring rests on the key grip.
CAUTION
l
Radio equipment like this is
governed by laws in the United
States.
l
Metal parts of other keys or metal
objects touch the key grip.
Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user's authority to operate
the equipment.
l
To avoid damage to the key, do not:
l
Drop the key.
Get the key wet.
Expose the key to any kind of
l
l
Spare keys or keys for other vehicles
l
equipped with an immobilizer
system touch or come near the key
grip.
magnetic field.
Expose the key to high
l
temperatures on places such as the
dashboard or hood, under direct
sunlight.
l
Devices for electronic purchases, or
security passage touch or come near
the key.
3-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page120
Tuesday, May 9 2006 10:44 AM
Black plate (120,1)
Knowing Your Mazda
Security System
Disarming
NOTE
The system is disarmed when the ignition
switch is turned to the ON position with
the correct ignition key.
The security indicator light illuminates for
about 3 seconds and goes out.
l
(U.S.A.)
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
If the engine doesn't start with the correct
ignition key, and the security indicator
light keeps illuminating or flashing, the
system may have a malfunction. Consult
an Authorized Mazda Dealer.
l
(CANADA)
This device complies with RSS-210
of Industry CANADA. Operation is
subject to the following two
conditions: (1) this device may not
cause interference, and (2) this
device must accept any interference,
including interference that may cause
undesired operation of the device.
NOTE
l
If the security indicator light comes
on and stays on when the ignition
switch is turned to the ON position,
the engine will not start.
l
Signals from a TVor radio station, or
from a transceiver or a mobile
telephone, could interfere with your
immobilizer system. If you are using
the proper key and your engine fails
to start, check the security indicator
light. If it is flashing, remove the
ignition key and wait 2 seconds or
more, then reinsert it and try starting
the engine again. If it doesn't start
after 3 or more tries, contact an
Authorized Mazda Dealer.
qOperation
Arming
The system is armed when the ignition
switch is turned from the ON to the ACC
position.
The security indicator light in the
instrument panel flashes every 2 seconds
until the system is disarmed.
l
If the security indicator light flashes
continuously while you are driving,
don't shut off the engine. Go to an
Authorized Mazda Dealer and have
it checked. If you shut off the engine
while the light is flashing you won't
be able to restart it.
3-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page121
Tuesday, May 9 2006 10:44 AM
Black plate (121,1)
Knowing Your Mazda
Security System
qModification and Add-On
NOTE
Equipment
l
Since the electronic codes are reset
Mazda cannot guarantee the immobilizer
system's operation if the system has been
modified or if any add-on equipment has
been installed to it.
when repairing the immobilizer
system, the keys are needed. Bring
all the existing keys to an Authorized
Mazda Dealer.
CAUTION
qMaintenance
To avoid damage to your vehicle, do
not modify the system or install any
add-on equipment to the immobilizer
system or the vehicle.
If you have a problem with the
immobilizer system or the key, consult an
Authorized Mazda Dealer.
NOTE
l
The keys carry a unique electronic
code. For this reason, and to assure
your safety, obtaining replacement
key requires some waiting time.
They are only available through an
Authorized Mazda Dealer.
l
Always keep a spare key, in case one
is lost. If a key is lost, contact an
Authorized Mazda Dealer as soon as
possible.
l
If you lose a key, an Authorized
Mazda Dealer will reset the
electronic codes of your remaining
keys and immobilizer system. Bring
all the remaining keys to an
Authorized Mazda Dealer to reset.
Starting the vehicle with a key that
has not been reset is not possible.
3-51
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page122
Tuesday, May 9 2006 10:44 AM
Black plate (122,1)
Knowing Your Mazda
Security System
l
l
l
Unlocking a door with the inside door-
lock knob.
Theft-Deterrent System
The theft-deterrent system is designed to
prevent your vehicle or its contents from
being stolen when all doors, hood, and
trunk lid are locked.
Unlocking a door with the door lock
switch.
Opening the hood by operating the
hood release handle.
If forcible entry is attempted, the system
sounds the horn and flashes the hazard
warning lights.
If the system is triggered again, the lights
and horn will activate until a door or the
trunk lid is unlocked with the key or with
the transmitter.
(With advanced key)
NOTE
The lights and horn can also be
deactivated by pressing a request switch.
l
The theft-deterrent system operates
with the key or the keyless entry
system transmitter.
qHow to Arm the System
l
(With advanced key)
1. Remove the key from the ignition
switch.
The theft-deterrent system can also
be operated using a request switch or
the start knob.
The system operates only when the
driver is in the vehicle or within
operational range while the advanced
key is being carried.
(With advanced key)
Turn the start knob to the LOCK
position.
2. Make sure the hood is closed. Close
and lock all doors and the trunk lid
from the outside using the key or press
the lock button on your keyless entry
system transmitter.
l
The system will not function unless
it is properly armed. To properly
secure the vehicle, always make sure
all windows are completely closed
and all doors and the trunk lid are
locked before leaving the vehicle.
Remember to take your key and
transmitter.
(With advanced key)
Press a request switch or the lock
button on the transmitter.
The hazard warning lights will flash
once to indicate that the system is
armed.
qOperation
(Without advanced key)
The following method will also arm the
theft-deterrent system:
System triggering conditions
The horn sounds intermittently and the
hazard warning lights flash for about 25
seconds when the system is triggered by
any one of the following:
Close the hood and the trunk lid . Press
the area on the door-lock switch
marked “LOCK” once. Close all doors.
l
Forcing open a door, the hood or the
trunk lid.
3-52
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page123
Tuesday, May 9 2006 10:44 AM
Black plate (123,1)
Knowing Your Mazda
Security System
NOTE
NOTE
Locking the doors with the inside door-
lock knob will not arm the system.
If you have any problem with the theft-
deterrent system, consult an Authorized
Mazda Dealer.
qTo Turn off an Armed System
qTheft-Deterrent Labels
An armed system can be turned off by any
one of the following methods:
l
Unlock a door or the trunk lid with the
key.
l
Press the unlock button on the keyless
entry system transmitter.
l
Insert the key into the ignition switch
and turn it to the ON position.
l
(With advanced key)
l
Press a request switch or the unlock
button on the transmitter.
Turn the start knob to the ON
position.
A label indicating that your vehicle is
equipped with a Theft-Deterrent System is
in the glove box.
l
The hazard warning lights will flash twice
to indicate that the system is turned off.
Mazda recommends that you affix it to the
lower rear corner of a front door window.
qTo Stop an Alarm
A triggered alarm can be turned off by
any one of the following methods:
l
Unlock a door or the trunk lid with the
key.
l
Press the unlock button on the keyless
entry system transmitter.
l
(With advanced key)
l
Press a request switch.
Press the unlock button on the
l
transmitter.
3-53
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page124
Tuesday, May 9 2006 10:44 AM
Black plate (124,1)
Knowing Your Mazda
Steering Wheel and Mirrors
Steering Wheel
Mirrors
qOutside Mirrors
WARNING
Check the mirror angles before driving.
Never adjust the steering wheel while
the vehicle is moving:
WARNING
Adjusting the steering wheel while the
vehicle is moving is dangerous.
Moving it can very easily cause the
driver to abruptly turn to the left or
right. This can lead to loss of control
or an accident.
Convex Mirror (Passenger Side):
Changing lanes without taking into
account the actual distance of the
vehicle in the convex mirror is
dangerous. You could have a serious
accident. What you see in the convex
mirror is closer than it appears. Be
sure to look over your shoulder before
changing lanes.
qSteering Wheel Adjustment
To change the angle or length of the
steering wheel:
1. Stop the vehicle, pull down the lock
release lever under the steering
column.
Power control mirror
The ignition switch must be in the ACC
or ON position.
Lock release lever
To adjust:
1. Press the left or right side of the
selector switch to choose the left or
right side mirror.
2. Depress the mirror switch in the
appropriate direction.
Selector switch
2. Tilt the steering wheel and/or adjust the
steering column length to the desired
positions, push the lever up to lock the
column.
Outside mirror
Mirror switch
3. Push the wheel up and down to be
certain it's locked before driving.
3-54
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page125
Tuesday, May 9 2006 10:44 AM
Black plate (125,1)
Knowing Your Mazda
Steering Wheel and Mirrors
After adjusting the mirror, lock the control
by placing the selector switch in the
middle position.
qRearview Mirror
Rearview mirror adjustment
Before driving, adjust the rearview mirror
to center on the scene through the rear
window.
Folding the mirror
Fold the outside mirror rearward until it is
flush with the vehicle.
Reducing glare from headlights
Adjust the mirror with the day/night lever
in the day position.
WARNING
Always return the outside mirrors to
the driving position before you start
driving:
Push the lever forward for day driving.
Pull it back to reduce glare from
headlights.
Driving with the outside mirrors
folded in is dangerous. Your rear view
will be restricted, and you could have
an accident.
Day/Night lever
Mirror defrosterí
To turn on the mirror defrosters, turn the
ignition switch to the ON position and
push the rear window defroster switch
(page 5-40).
Day
Night
íSome models.
3-55
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page126
Tuesday, May 9 2006 10:44 AM
Black plate (126,1)
Knowing Your Mazda
Steering Wheel and Mirrors
WARNING
Do not stack cargo or objects higher
than the seatbacks:
Cargo stacked higher than the
seatbacks is dangerous. It can block
your view in the rearview mirror,
which might cause you to hit another
car when changing lanes.
3-56
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page127
Tuesday, May 9 2006 10:44 AM
Black plate (127,1)
Before Driving Your Mazda
4
Important information about driving your Mazda.
Towing ......................................................................................... 4-12
4-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page128
Tuesday, May 9 2006 10:44 AM
Black plate (128,1)
Before Driving Your Mazda
Fuel and Engine Exhaust Precautions
Fuel Requirements
Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL,
which will reduce exhaust emissions and keep spark plug fouling to a minimum.
Your Mazda will perform best with fuel listed in the table.
Fuel
Octane Rating*(Anti-knock index)
Premium unleaded fuel
93 [ (R+M)/2 method] or above (98 RON or above)
* U.S. federal law requires that octane ratings be posted on gasoline station pumps.
This vehicle is designed to use 93 [ (R+M)/2 method] (98RON) or higher gasoline for best
performance. If 93 [ (R+M)/2 method] (98RON) is not available, 91 or 92 [ (R+M)/2
method] (96 or 97RON) gasoline can be used. In case 91 or 92 [ (R+M)/2 method] (96 or
97RON) is not available, gasoline as low as 87 [ (R+M)/2method] (91RON) can be used
temporarily for emergency purposes. Use of gasoline lower than 93 [ (R+M)/2 method]
(98RON) can decrease performance during its use.
CAUTION
l
USE ONLY UNLEADED FUEL.
Leaded fuel is harmful to the catalytic converter or the oxygen sensor. The lead will
accumulate on the oxygen sensor and the catalyst inside the converter. This will result
in a malfunction of the emission control system, causing poor performance.
l
Your vehicle can only use oxygenated fuels containing no more than 10% ethanol by
volume. Damage to your vehicle may occur when ethanol exceeds this
recommendation, or if the gasoline contains any methanol. Stop using gasohol of any
kind if your vehicle engine is performing poorly.
l
Never add fuel system additives. Never add cleaning agents other than those specified
by Mazda. Other cleaning agents and additives may damage the system. Consult an
Authorized Mazda Dealer.
Gasoline blended with oxygenates such as alcohol or ether compounds are generally
referred to as oxygenated fuels. The common gasoline blend that can be used with your
vehicle is ethanol blended at no more than 10%. Gasoline containing alcohol, such as
ethanol or methanol, may be marketed under the name “Gasohol”.
Vehicle damage and drivability problems resulting from the use of the following may not
be covered by the Mazda warranty.
l
Gasohol containing more than 10% ethanol.
l
Gasoline or gasohol containing methanol.
l
Leaded fuel or leaded gasohol.
4-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page129
Tuesday, May 9 2006 10:44 AM
Black plate (129,1)
Before Driving Your Mazda
Fuel and Engine Exhaust Precautions
Emission Control System
Your vehicle is equipped with an emission control system (the catalytic converter is part of
this system) that enables your vehicle to comply with existing exhaust emissions
requirements.
WARNING
Never park over or near anything flammable:
Parking over or near anything flammable, such as dry grass, is dangerous. Even with
the engine turned off, the exhaust system remains very hot after normal use and could
ignite anything flammable. A resulting fire could cause serious injury or death.
CAUTION
Ignoring the following precautions could cause lead to accumulate on the catalyst inside
the converter or cause the converter to get very hot. Either condition will damage the
converter and cause poor performance.
l
USE ONLY UNLEADED FUEL.
l
Don't drive your Mazda with any sign of engine malfunction.
l
Don't coast with the ignition switch turned off.
l
Don't descend steep grades in gear with the ignition switch turned off.
l
Don't operate the engine at high idle for more than 2 minutes.
l
Don't tamper with the emission control system. All inspections and adjustments must
be made by a qualified technician.
l
Don't push-start or pull-start your vehicle.
NOTE
Under U.S. federal law, any modification to the original-equipment emission control
system before the first sale and registration of a vehicle is subject to penalties. In some
states, such modification made on a used vehicle is also subject to penalties.
NOTE
While the engine is off, the sound of a valve opening and closing can be heard at the rear
of the vehicle, however this does not indicate an abnormality. Your vehicle has a self-
checking device and it operates while the engine is off.
4-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page130
Tuesday, May 9 2006 10:44 AM
Black plate (130,1)
Before Driving Your Mazda
Fuel and Engine Exhaust Precautions
Engine Exhaust (Carbon Monoxide)
WARNING
Do not drive your vehicle if you smell exhaust gas inside the vehicle:
Engine exhaust gas is dangerous. This gas contains carbon monoxide (CO), which is
colorless, odorless, and poisonous. When inhaled, it can cause loss of consciousness
and death. If you smell exhaust gas inside your vehicle, keep all windows fully open
and contact an Authorized Mazda Dealer immediately.
Do not run the engine when inside an enclosed area:
Running the engine inside an enclosed area, such as a garage, is dangerous. Exhaust
gas, which contains poisonous carbon monoxide, could easily enter the cabin. Loss of
consciousness or even death could occur.
Open the windows or adjust the heating or cooling system to draw fresh air when
idling the engine:
Exhaust gas is dangerous. When your vehicle is stopped with the windows closed and
the engine running for a long time even in an open area, exhaust gas, which contains
poisonous carbon monoxide, could enter the cabin. Loss of consciousness or even
death could occur.
Clear snow from underneath and around your vehicle, particularly the tail pipe,
before starting the engine:
Running the engine when a vehicle is stopped in deep snow is dangerous. The exhaust
pipe could be blocked by the snow, allowing exhaust gas to enter the cabin. Because
exhaust gas contains poisonous carbon monoxide, it could cause loss of
consciousness or even death to occupants in the cabin.
4-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page131
Tuesday, May 9 2006 10:44 AM
Black plate (131,1)
Before Driving Your Mazda
Before Starting the Engine
Before Getting In
After Getting In
l
l
l
l
Be sure the windows, outside mirrors,
and outside lights are clean.
Are all doors closed and locked?
Is the seat adjusted properly?
l
Inspect inflation pressures and
condition of tires.
Are the inside and outside mirrors
adjusted?
l
Look under the vehicle for any sign of
fluid leaks.
l
l
l
Is everyone's seat belt fastened?
Check all gauges.
l
If you plan to back up, make sure
nothing is in your way.
Check all warning lights when the
ignition switch is turned to the ON
position.
NOTE
l
Release the parking brake and make
sure the brake warning light goes off.
Engine oil, engine coolant, brake/clutch
fluid, washer fluid, and other fluid
levels should be inspected. See
Maintenance, Section 8.
Always be thoroughly familiar with your
Mazda.
4-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page132
Tuesday, May 9 2006 10:44 AM
Black plate (132,1)
Before Driving Your Mazda
Driving Tips
Break-In Period
Money-Saving Suggestions
No special break-in is necessary, but a few
precautions in the first 1,000 km (600
miles) may add to the performance,
economy, and life of your Mazda.
How you operate your Mazda determines
how far it will travel on a tank of fuel. Use
these suggestions to help save money on
fuel and repairs.
l
l
Don't race the engine.
Avoid long warm-ups. Once the engine
runs smoothly, begin driving.
l
Don't maintain one constant speed,
either slow or fast, for a long period of
time.
l
Avoid fast starts.
l
Keep the engine tuned. Follow the
l
Don't drive constantly at full-throttle or
high engine rpm for extended periods
of time.
have an Authorized Mazda Dealer
perform inspections and servicing.
l
l
Avoid unnecessary hard stops.
Use the air conditioner only when
necessary.
l
Avoid full-throttle starts.
l
Slow down on rough roads.
l
Keep the tires properly inflated.
l
Don't carry unnecessary weight.
l
Don't rest your foot on the brake pedal
while driving.
l
Keep the wheels in correct alignment.
l
Keep windows closed at high speeds.
l
Slow down when driving in crosswinds
and headwinds.
WARNING
Never stop the engine when going
down a hill:
Stopping the engine when going down
a hill is dangerous. This causes the
loss of power steering and power
brake control, and may cause damage
to the drivetrain. Any loss of steering
or braking control could cause an
accident.
4-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page133
Tuesday, May 9 2006 10:44 AM
Black plate (133,1)
Before Driving Your Mazda
Driving Tips
l
For more traction in starting on
Hazardous Driving
slippery surfaces, use sand, rock salt,
chains, carpeting, or other nonslip
material under the front wheels.
WARNING
Be extremely careful if it is necessary
to downshift on slippery surfaces:
Downshifting into lower gear while
driving on slippery surfaces is
dangerous. The sudden change in tire
speed could cause the tires to skid.
This could lead to loss of vehicle
control and an accident.
Do not rely on ABS as a substitute for
safe driving:
The ABS cannot compensate for
unsafe and reckless driving, excessive
speed, tailgating (following another
vehicle too closely), driving on ice and
snow, and hydroplaning (reduced tire
friction and road contact because of
water on the road surface). You can
still have an accident.
When driving in water, mud, sand, or
similar hazards:
l
Be cautious and allow extra distance
for braking.
l
Avoid sudden braking and sudden
maneuvering.
l
Do not pump the brakes. Continue to
press down on the brake pedal.
Refer to Anti-Lock Brake System
(ABS) on page 5-7.
l
If you get stuck, select a lower gear and
accelerate slowly. Do not spin the front
wheels.
Refer to All-Wheel Drive Operation on
4-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page134
Tuesday, May 9 2006 10:44 AM
Black plate (134,1)
Before Driving Your Mazda
Driving Tips
Rocking the Vehicle
Winter Driving
l
Carry emergency gear, window
scraper, flares, a small shovel, jumper
cables, and a small bag of sand or salt.
WARNING
Do not spin the wheels at more than
56 km/h (35 mph), and do not allow
anyone to stand behind a wheel when
pushing the vehicle:
When the vehicle is stuck, spinning
the wheels at high speed is dangerous.
The spinning tire could overheat and
explode. This could cause serious
injuries.
Ask an Authorized Mazda Dealer to
perform the following precautions:
l
Have the proper ratio of antifreeze in
the radiator.
Refer to Engine Coolant on page 8-15.
l
Inspect the battery and its cables. Cold
reduces battery capacity.
l
Inspect the ignition system for damage
and loose connections.
l
CAUTION
Use washer fluid made with
antifreeze―but don't use engine
coolant antifreeze for washer fluid
(page 8-18).
Too much rocking may cause engine
overheating, transaxle failure, and tire
damage.
l
Don't use the parking brake in freezing
weather as the parking brake may
freeze. Instead, shift to 1 or R and
block the rear wheels.
If you must rock the vehicle to free it from
snow, sand or mud, depress the
accelerator slightly and slowly move the
shift lever from 1 to R.
qSnow Tires
Use snow tires on all four wheels
Don't go faster than 120 km/h (75 mph)
while driving with snow tires. Inflate
snow tires 30 kPa (0.3 kgf/cm2, 4.3 psi)
more than recommended on the tire
pressure label (driver's door frame), but
never more than the maximum cold-tire
pressure shown on the tires.
Your vehicle is originally equipped with
summer tires designed for optimum
traction on wet and dry roads. If your
vehicle is to be used on snow and ice
covered roads, Mazda recommends that
you replace the tires originally equipped
on your vehicle with snow tires during the
winter months.
4-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page135
Tuesday, May 9 2006 10:44 AM
Black plate (135,1)
Before Driving Your Mazda
Driving Tips
Driving In Flooded Area
WARNING
Use only the same size and type tires
(snow, radial, or non-radial) on all
four wheels:
Using tires different in size or type is
dangerous. Your vehicle's handling
could be greatly affected and result in
an accident.
WARNING
Dry wet brakes by driving very slowly
and applying the brakes lightly until
brake performance returns to normal:
Driving with wet brakes is dangerous.
Increased stopping distance or the
vehicle pulling to one side when
braking could result in a serious
accident. Light braking will indicate
whether the brakes have been affected.
CAUTION
Check local regulations before using
studded tires.
CAUTION
qTire Chains
Make sure water does not enter the
vehicle interior or the engine area.
Interior materials could get moldy, and
many electronic devices in the cabin
and the engine could be damaged.
This vehicle cannot be operated with tire
chains because it could cause interference
with the vehicle body and scratching.
4-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page136
Tuesday, May 9 2006 10:44 AM
Black plate (136,1)
Before Driving Your Mazda
Driving Tips
Overloading
WARNING
Be careful not to overload your
vehicle:
The gross axle weight rating (GAWR)
and the gross vehicle weight rating
(GVWR) of your vehicle are on the
Motor Vehicle Safety Standard Label
on the driver's door frame. Exceeding
these ratings can cause an accident or
vehicle damage. You can estimate the
weight of your load by weighing the
items (or people) before putting them
in the vehicle.
4-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page137
Tuesday, May 9 2006 10:44 AM
Black plate (137,1)
Before Driving Your Mazda
Driving Tips
Turbocharger Information
The turbocharger greatly enhances engine power. Its advanced design provides improved
operation and requires minimum additional maintenance. To get maximum performance
from your turbocharged engine, take note of the following tips:
l
The turbocharged engine is designed for optimal operation with premium unleaded
NOT recommended.
l
Change the engine oil and filter using the turbo engine interval outlined in the
maintenance schedule (for your driving condition).
l
recommended.
l
After driving at freeway speeds or up a long hill, idle the engine at least 30 seconds to
cool the turbo before turning off the engine. Avoid simply shutting the engine off
abruptly after a hard or long drive. Damage to the turbocharger may result.
l
Don't race or over-rev the engine when starting. This should not be done with ANY
engine, especially not with one that's turbocharged.
l
Do not add any aftermarket devices to alter the engine's ignition timing, fuel delivery, or
turbo boost pressure. This may lead to serious engine damage and may void your
warranty.
4-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page138
Tuesday, May 9 2006 10:44 AM
Black plate (138,1)
Before Driving Your Mazda
Towing
Trailer Towing
The Mazdaspeed6 is not designed for
towing. Never tow a trailer with your
Mazdaspeed6.
4-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page140
Tuesday, May 9 2006 10:44 AM
Black plate (140,1)
Driving Your Mazda
Starting and Driving
qIgnition Switch Positions
Ignition Switch
With advanced
key
(With advanced key)
NOTE
When starting the engine using the
advanced key, refer to Starting the
Engine (page 3-10).
Without advanced
key
When starting the engine with the
auxiliary key, perform the following
procedure.
LOCK
1. Remove the auxiliary key from the
advanced key (page 3-15).
The steering wheel locks to protect
against theft. Only in this position can the
key be removed.
2. Make sure the start knob is in LOCK
position.
3. Remove the start knob by pulling it
outward while pressing the buttons on
both the left and right sides.
Push the key
4. Insert the auxiliary key in the ignition
switch.
5-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page141
Tuesday, May 9 2006 10:44 AM
Black plate (141,1)
Driving Your Mazda
Starting and Driving
START
WARNING
The engine is started in this position. It
will crank until you release the key; then
it returns to the ON position. The brake
warning light can be checked after the
engine is started (page 5-24).
Remove the key only when the vehicle
is parked:
Removing the key from the ignition
switch while the vehicle is moving is
dangerous. Removing the key allows
the steering wheel to lock. You will
lose steering control and a serious
accident could occur.
qIgnition Key Reminder
If the ignition switch is in the LOCK or
ACC position with the key inserted, a
continuous beep sound will be heard
when the driver's door is opened.
Before leaving the driver's seat,
always set the parking brake and
make sure the shift lever is in 1 or R:
Leaving the driver's seat without
setting the parking brake and the shift
lever is dangerous. Unexpected vehicle
movement could occur. This could
cause an accident.
NOTE
If turning the key is difficult, jiggle the
steering wheel from side to side.
ACC (Accessory)
The steering wheel unlocks and some
electrical accessories will operate.
ON
This is the normal running position after
the engine is started. The warning lights
(except brakes) should be inspected
before the engine is started (page 5-24).
NOTE
When the ignition switch is turned to
the ON position, the sound of the fuel
pump motor operating near the fuel
tank can be heard. This does not
indicate an abnormality.
5-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page142
Tuesday, May 9 2006 10:44 AM
Black plate (142,1)
Driving Your Mazda
Starting and Driving
NOTE
Starting the Engine
l
In extremely cold weather, below
18 °C (0 °F), or after the vehicle
NOTE
_
has not been driven in several days,
let the engine warm up without
operating the accelerator.
Engine-starting is controlled by the
spark ignition system.
This system meets all Canadian
Interference-Causing Equipment
Standard requirements regulating the
impulse electrical field strength of radio
noise.
l
Whether the engine is cold or warm,
it should be started without use of
the accelerator.
1. Occupants should fasten their seat
belts.
2. Make sure the parking brake is on.
3. Depress the brake pedal.
4. Depress the clutch pedal all the way
and shift into neutral.
Keep the clutch pedal depressed while
cranking the engine.
NOTE
The starter will not operate if the clutch
pedal is not depressed all the way.
5. Turn the ignition switch to the START
position and hold (up to 10 seconds at
a time) until the engine starts.
CAUTION
Don't try the starter for more than 10
seconds at a time. If the engine stalls or
fails to start, wait 10 seconds before
trying again. Otherwise, you may
damage the starter and drain the battery.
6. After starting the engine, let it idle for
about 10 seconds.
5-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page143
Tuesday, May 9 2006 10:44 AM
Black plate (143,1)
Driving Your Mazda
Starting and Driving
Brake System
WARNING
qFoot Brake
Dry brakes that have become wet by
driving very slowly and applying the
brakes lightly until brake performance
is normal:
Your Mazda has power-assisted brakes
that adjust automatically through normal
use.
Driving with wet brakes is dangerous.
Increased stopping distance or the
vehicle pulling to one side when
braking could result in a serious
accident. Light braking will indicate
whether the brakes have been affected.
Should power-assist fail, you can stop by
applying greater force than normal to the
brake pedal. But the distance required to
stop will be greater than usual.
WARNING
qParking Brake
Do not coast with the engine stalled or
turned off, find a safe place to stop:
Coasting with the engine stalled or
turned off is dangerous. Braking will
require more effort, and the brake's
power-assist could be depleted if you
pump the brake. This will cause
longer stopping distances or even an
accident.
WARNING
Before leaving the driver's seat,
always set the parking brake and
make sure the shift lever is in 1 or R:
Leaving the driver's seat without
setting the parking brake and the shift
lever is dangerous. Unexpected vehicle
movement could occur. This could
cause an accident.
Shift to a lower gear when going down
steep hills:
Driving with your foot continuously
on the brake pedal or steadily applying
the brakes for long distances is
dangerous. This causes overheated
brakes, resulting in longer stopping
distances or even total brake failure.
This could cause loss of vehicle
control and a serious accident. Avoid
continuous application of the brakes.
CAUTION
Driving with the parking brake on will
cause excessive wear of the brake
linings or pads.
NOTE
For parking in snow, refer to Winter
brake use.
5-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page144
Tuesday, May 9 2006 10:44 AM
Black plate (144,1)
Driving Your Mazda
Starting and Driving
Setting the parking brake
qBrake System Warning Light
Depress the brake pedal and then firmly
pull the parking brake lever fully upwards
with a greater amount of force than is
required so that the vehicle holds in the
stationary position.
This warning has the following functions:
Parking brake warning
The light comes on when the parking
brake is applied with the ignition switch
in the START or ON position. It goes off
when the parking brake is fully released.
Low brake fluid level warning
If the light stays on after the parking brake
is fully released, you may have a brake
problem.
Releasing the parking brake
Depress the brake pedal and pull the
parking brake lever upwards, then press
the release button. While holding the
button, lower the parking brake lever all
the way down to the released position.
Drive to the side of the road and park off
the right-of-way.
You may notice that the pedal is harder to
push or that it may go closer to the floor.
In either case, it will take longer to stop
the vehicle.
1. With the engine stopped, check the
brake fluid level immediately and add
fluid as required (page 8-17).
2. After adding fluid, check the light
again.
If the warning light remains on, or if the
brakes do not operate properly, do not
drive the vehicle. Have it towed to an
Authorized Mazda Dealer.
Even if the light goes out have your brake
system inspected as soon as possible by
an Authorized Mazda Dealer.
5-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page145
Tuesday, May 9 2006 10:44 AM
Black plate (145,1)
Driving Your Mazda
Starting and Driving
NOTE
WARNING
Having to add brake fluid is sometimes
an indicator of leakage. Consult an
Authorized Mazda Dealer as soon as
possible even if the brake light is no
longer illuminated.
Do not rely on ABS as a substitute for
safe driving:
The ABS cannot compensate for
unsafe and reckless driving, excessive
speed, tailgating (following another
vehicle too closely), driving on ice and
snow, and hydroplaning (reduced tire
friction and road contact because of
water on the road surface). You can
still have an accident.
WARNING
Do not drive with the brake system
warning light illuminated. Contact an
Authorized Mazda Dealer to have the
brakes inspected as soon as possible:
Driving with the brake system warning
light illuminated is dangerous. It
indicates that your brakes may not
work at all or that they could
completely fail at any time. If this light
remains illuminated, after checking
that the parking brake is fully
released, have the brakes inspected
immediately.
NOTE
Braking distances may be longer on
loose surfaces (snow or gravel, for
example) which usually have a hard
foundation. A vehicle with a normal
braking system may require less
distance to stop under these conditions
because the tires will build up a wedge
of surface layer when the wheels skid.
qAnti-Lock Brake System (ABS)
qABS Warning Light
The ABS control unit continuously
monitors the speed of each wheel. If one
is about to lock up, the ABS responds by
automatically releasing and reapplying
that wheel's brake.
The driver will feel a slight vibration in
the brake pedal and may hear a chattering
noise from the brake system. This is
normal when the ABS operates. Don't
pump the brakes, continue to press down
on the brake pedal.
The warning light stays on for a few
seconds when the ignition switch is turned
to the ON position.
5-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page146
Tuesday, May 9 2006 10:44 AM
Black plate (146,1)
Driving Your Mazda
Starting and Driving
If the ABS warning light stays on while
you're driving, the ABS control unit has
detected a system malfunction. If this
occurs, your brakes will function normally
as if the vehicle had no ABS.
WARNING
Do not drive with both the ABS
warning light and brake warning light
illuminated. Have the vehicle towed to
an Authorized Mazda Dealer to have
the brakes inspected as soon as
possible:
Should this happen, consult an Authorized
Mazda Dealer as soon as possible.
NOTE
Driving when the brake system
warning light and ABS warning light
are illuminated at the same time is
dangerous.
When both lights are illuminated, the
rear wheels could lock more quickly in
an emergency stop than under normal
circumstances.
When the engine is jump-started to
charge the battery, uneven rpm occurs
and the ABS warning light comes on.
This is due to a weak battery, not a
malfunction.
Recharge the battery.
qElectronic Brake Force
Distribution System Warning
qBrake Pad Wear Indicator
When the disc brake pads become worn,
the built-in wear indicators contact the
disc plates. This causes a screeching noise
to warn that the pads should be replaced.
If the electronic brake force distribution
control unit determines that some
components are operating incorrectly, the
control unit may turn the brake system
warning light and the ABS warning light
on at the same time. The problem is likely
to be an electronic brake force distribution
system.
When you hear this noise, consult an
Authorized Mazda Dealer as soon as
possible.
5-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page147
Tuesday, May 9 2006 10:44 AM
Black plate (147,1)
Driving Your Mazda
Starting and Driving
Manual Transaxle Operation
WARNING
qManual Transaxle Shift Pattern
Do not drive with worn disc pads:
Driving with worn disc pads is
dangerous. The brakes could fail and
cause a serious accident. As soon as
you hear a screeching noise consult
an Authorized Mazda Dealer.
Neutral position
Depress the clutch pedal all the way down
while shifting; then release it slowly.
Your vehicle is equipped with a device to
prevent shifting to R (reverse) by mistake.
Push the shift lever downward and shift to
R.
5-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page148
Tuesday, May 9 2006 10:44 AM
Black plate (148,1)
Driving Your Mazda
Starting and Driving
qRecommendations for Shifting
WARNING
Upshifting
For normal acceleration, we recommend
these shift points.
Do not use sudden engine braking on
slippery road surfaces or at high
speeds:
Gear
Vehicle speed
30 km/h (19 mph)
Shifting down while driving on wet,
snowy, or frozen roads, or while
driving at high speeds causes sudden
engine braking, which is dangerous.
The sudden change in tire speed could
cause the tires to skid. This could lead
to loss of vehicle control and an
accident.
1 to 2
2 to 3
3 to 4
4 to 5
5 to 6
47 km/h (29 mph)
59 km/h (37 mph)
68 km/h (42 mph)
90 km/h (50 mph)
For cruising
Gear
1 to 2
Vehicle speed
18 km/h (11 mph)
40 km/h (25 mph)
51 km/h (32 mph)
64 km/h (40 mph)
78 km/h (49 mph)
Be sure to leave the shift lever in 1 or
R position and set the parking brake
when leaving the vehicle unattended:
Otherwise the vehicle could move and
cause an accident.
2 to 3
3 to 4
4 to 5
5 to 6
Downshifting
When you must slow down in heavy
traffic or on a steep upgrade, downshift
before the engine starts to overwork. This
reduces the chance of stalling and gives
better acceleration when you need more
speed.
On a steep downgrade, downshifting
helps maintain safe speed and prolongs
brake life.
CAUTION
l
Keep your foot off the clutch pedal
except when shifting gears. Also,
don't use the clutch to hold the
vehicle on an upgrade. Riding the
clutch will cause needless clutch
wear and damage.
l
Make sure the vehicle comes to a
complete stop before shifting to R.
Shifting to R while the vehicle is still
moving may damage the transaxle.
NOTE
If shifting to R is difficult, shift back
into neutral, release the clutch pedal,
and try again.
5-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page149
Tuesday, May 9 2006 10:44 AM
Black plate (149,1)
Driving Your Mazda
Starting and Driving
Power Steering
All-Wheel Drive (AWD)
Operation
Power steering is only operable when the
engine is running. If the engine is off or if
the power steering system is inoperable,
you can still steer, but it requires more
physical effort.
AWD provides excellent driveability on
snow-covered and ice-packed roads, sand
and mud, as well as on steep slopes and
other slippery surfaces.
If the steering feels stiffer than usual
during normal driving, consult an
Authorized Mazda Dealer.
qAWD Driving
This vehicle has not been designed for the
purpose of off-road driving or rallies. Do
not attempt to drive over uneven or rocky
surfaces, or across rivers.
CAUTION
Although this vehicle is equipped with
AWD, acceleration, steering and braking
operations should be conducted in the
same manner as with a non-AWD vehicle,
with the emphasis placed on safe driving.
Never hold the steering wheel to the
extreme left or right for more than 5
seconds with the engine running.
This could damage the power steering
system.
qAWD Warning Light
This warning light stays on for a few
seconds when the ignition switch is turned
to the ON position.
Thereafter, the warning light will
illuminate or flash under the following
conditions:
l
Illuminates when there is an
abnormality with the AWD system.
l
Flashes when the differential oil
temperature is abnormally high.
5-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page150
Tuesday, May 9 2006 10:44 AM
Black plate (150,1)
Driving Your Mazda
Starting and Driving
l
l
Flashes when there are continually
All tires must be of the same size,
manufacture, brand and tread pattern.
Pay particular attention when
equipping snow or other types of
winter tires.
large differences between front and rear
wheel rotation, such as when trying to
pull away from an icy surface.
If the AWD warning light illuminates:
l
l
Do not mix tread-worn tires with
normal tires.
If the AWD warning light illuminates,
contact an Authorized Mazda Dealer.
Inspect tire inflation pressures at the
specified periods and adjust to the
specified pressures.
If the AWD warning light flashes:
Park the vehicle in a safe place. After a
few moments; if the warning light stops
flashing, you can resume driving. If the
light does not stop flashing, contact an
Authorized Mazda Dealer.
NOTE
Check the tire inflation pressure label
attached to driver's door frame for the
correct tire inflation pressure.
WARNING
l
Make sure to equip the vehicle with
genuine wheels of the specified size,
on all wheels. With AWD, the system
is calibrated for all four wheels being
of the same dimensions.
Never spin a wheel that is off the
ground:
Spinning a wheel that is off the
ground as a result of the vehicle being
stuck or in a ditch is dangerous. The
drive assembly could be seriously
damaged which could lead to an
accident or could even lead to
overheating, oil leakage, and a fire.
Tire chains
This vehicle cannot be driven with tire
chains installed because they could cause
interference with the vehicle body or
scratching.
qTires and Tire Chains
qTowing
The condition of the tires plays a large
role in the performance of the vehicle.
Moreover, to prevent adverse effects to
the drive assembly, please note the
following:
If the vehicle requires towing, have it
towed with all four wheels completely off
the ground(page 7-18).
Tires
l
When replacing tires, always replace
all front and rear tires at the same time.
5-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page151
Tuesday, May 9 2006 10:44 AM
Black plate (151,1)
Driving Your Mazda
Starting and Driving
qCruise Set Indicator Light
Cruise Control
With cruise control, you can set and
automatically maintain any speed of more
than about 30 km/h (19 mph).
WARNING
This light comes on when a cruising speed
is set.
Do not use the cruise control under
the following conditions:
Using the cruise control under the
following conditions is dangerous and
could result in loss of vehicle control.
qActivation/Deactivation
To activate the system, press the ON/OFF
switch.
The cruise main indicator light
illuminates.
l
Hilly terrain
Steep inclines
Heavy or unsteady traffic
Slippery or winding roads
l
l
l
l
Similar restrictions that require
To deactivate the system, press the switch
again.
inconsistent speed
The cruise main indicator light turns off.
qCruise Main Indicator Light
This light comes on when the CRUISE
MAIN switch is pressed and the cruise
control system is activated.
5-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page152
Tuesday, May 9 2006 10:44 AM
Black plate (152,1)
Driving Your Mazda
Starting and Driving
NOTE
WARNING
l
The SET function can't be activated
until about 2 seconds after the ON/
OFF switch has been engaged.
Keep the ON/OFF switch off when
cruise control is not in use:
Leaving the ON/OFF switch on when
l
On a steep grade, the vehicle may
momentarily slow down going up or
speed up while going down.
not using the cruise control is
dangerous as you may hit one of the
other buttons and put the vehicle in
cruise control unexpectedly. This
could result in loss of vehicle control.
qTo Increase Cruising Speed
Follow either of these procedures.
qTo Set Speed
l
Press the RES/ACCEL button and hold
it. Your vehicle will accelerate.
Release the button at the speed you
want.
1. Activate the cruise control system by
pressing the ON/OFF switch.
2. Accelerate to the desired speed, which
must be more than 30 km/h (19 mph).
3. Press the SET/COAST button and
release it at the speed you want.
Release the accelerator at the same
time.
Don't continue to hold in the button. Until
you release it, speed will continue to drop
(unless you continue to accelerate) and
you'll miss the desired speed.
5-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page153
Tuesday, May 9 2006 10:44 AM
Black plate (153,1)
Driving Your Mazda
Starting and Driving
Your vehicle has a tap-up feature that
allows you to increase your current speed
in increments of 1.6 km/h (1 mph) by a
momentary tap of the RES/ACCEL
button. Multiple taps will increase your
vehicle speed 1.6 km/h (1 mph) for each
tap.
qTo Decrease Cruising Speed
Press the SET/COAST button and hold it.
The vehicle will gradually slow.
Release the button at the speed you want.
l
Accelerate to the desired speed.
Press the SET/COAST button and
release it immediately.
Your vehicle has a tap-down feature that
allows you to decrease your current speed
in decrements of 1.6 km/h (1 mph) by a
momentary tap of the SET/COAST
button. Multiple taps will decrease your
vehicle speed 1.6 km/h (1 mph) for each
tap.
NOTE
Accelerate if you want to speed up
temporarily when the cruise control is
on. Greater speed will not interfere with
it or change the set speed.
Take your foot off the accelerator to
return to the set speed.
5-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page154
Tuesday, May 9 2006 10:44 AM
Black plate (154,1)
Driving Your Mazda
Starting and Driving
l
Press the CANCEL button.
qTo Resume Cruising Speed at
More Than 30 km/h (19 mph)
If some other method besides the ON/
OFF switch was used to cancel cruising
speed and the system is still activated, the
most recent set speed will automatically
resume when the RES/ACCEL button is
pressed.
If vehicle speed is below 30 km/h (19
mph), increase the vehicle speed up to 30
km/h (19 mph) and press the RES/
ACCEL button.
The system is off when the ignition is off.
NOTE
Cruise control will cancel at about 15
km/h (9 mph) below the preset speed or
below 30 km/h (19 mph).
qTo Cancel
To turn off the system, use one of these
methods:
l
Press the ON/OFF switch.
l
Slightly depress the brake pedal.
l
Depress the clutch pedal.
5-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page155
Tuesday, May 9 2006 10:44 AM
Black plate (155,1)
Driving Your Mazda
Starting and Driving
NOTE
Traction Control System
(TCS)
To turn off the TCS, press the DSC
OFF switch (page 5-19).
The Traction Control System (TCS)
enhances traction and safety by
controlling engine torque and braking.
When the TCS detects driving wheel
slippage, it lowers engine torque and
operates the brakes to prevent loss of
traction.
qTCS/DSC Indicator Light
This means that on a slick surface, the
engine adjusts automatically to provide
optimum power to the drive wheels
without causing them to spin and lose
traction.
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position. If the TCS or DSC is
operating, the indicator light flashes.
WARNING
If the light stays on, the TCS, DSC or the
brake assist system may have a
malfunction and they may not operate
correctly. Take your vehicle to an
Authorized Mazda Dealer.
Do not rely on the traction control
system as a substitute for safe driving:
The traction control system (TCS)
cannot compensate for unsafe and
reckless driving, excessive speed,
tailgating (following another vehicle
too closely), and hydroplaning
(reduced tire friction and road contact
because of water on the road surface).
You can still have an accident.
NOTE
l
In addition to the indicator light
flashing, a slight lugging sound will
come from the engine. This indicates
that the TCS is operating properly.
l
Use snow tires and drive at reduced
speeds when roads are covered with
ice and/or snow:
Driving without proper traction
devices on snow and/or ice-covered
roads is dangerous. The traction
control system (TCS) alone cannot
provide adequate traction and you
could still have an accident.
On slippery surfaces, such as fresh
snow, it will be impossible to
achieve high rpm when the TCS is
on.
5-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page156
Tuesday, May 9 2006 10:44 AM
Black plate (156,1)
Driving Your Mazda
Starting and Driving
Dynamic Stability Control
(DSC)
CAUTION
l
The DSC may not operate correctly
unless the following are observed:
The Dynamic Stability Control (DSC)
automatically controls braking and engine
torque in conjunction with systems such
as ABS and TCS to help control side slip
when driving on slippery surfaces, or
during sudden or evasive maneuvering,
enhancing vehicle safety.
l
l
l
Use tires of the correct size
specified for your Mazda on all
four wheels.
Use tires of the same
manufacturer, brand and tread
pattern on all four wheels.
Do not mix worn tires.
l
The DSC may not operate correctly
when a temporary spare tire is
installed because the tire diameter
changes.
WARNING
Do not rely on the dynamic stability
control as a substitute for safe driving:
The dynamic stability control (DSC)
cannot compensate for unsafe and
reckless driving, excessive speed,
tailgating (following another vehicle
too closely), and hydroplaning
qTCS/DSC Indicator Light
(reduced tire friction and road contact
because of water on the road surface).
You can still have an accident.
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position. If the TCS or DSC is
operating, the indicator light flashes.
If the light stays on, the TCS or DSC may
have a malfunction and they may not
operate correctly. Take your vehicle to an
Authorized Mazda Dealer.
5-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page157
Tuesday, May 9 2006 10:44 AM
Black plate (157,1)
Driving Your Mazda
Starting and Driving
qDSC OFF Indicator Light
NOTE
l
When DSC is on and you attempt to
free the vehicle when it is stuck, or
drive it out of freshly fallen snow,
the TCS (part of the DSC system)
will activate. Depressing the
accelerator will not increase engine
power and freeing the vehicle may
be difficult.
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position.
It also comes on when the DSC OFF
switch is pressed and TCS/DSC is
switched off (page 5-19).
When this happens, turn off the TCS/
DSC.
l
l
If the TCS/DSC is off when the
engine is turned off, it automatically
activates when the ignition switch is
turned on.
If the light stays on when the TCS/DSC is
not switched off, take your vehicle to an
Authorized Mazda Dealer. The dynamic
stability control may have a malfunction.
Leaving the TCS/DSC on will
provide the best stability.
qDSC OFF Switch
Press the DSC OFF switch to turn off the
TCS/DSC. The DSC OFF indicator light
will illuminate.
Press the switch again to turn the TCS/
DSC back on. The DSC OFF indicator
light will go out.
5-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page158
Tuesday, May 9 2006 10:44 AM
Black plate (158,1)
Driving Your Mazda
Instrument Cluster and Indicators
Meters and Gauges
When the ignition switch is in the ON position, the dashboard gauges illuminate.
5-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page159
Tuesday, May 9 2006 10:44 AM
Black plate (159,1)
Driving Your Mazda
Instrument Cluster and Indicators
qSpeedometer
NOTE
The speedometer indicates the speed of
the vehicle.
The odometer and trip meter can be
displayed as follows even when the
ignition switch is in the ACC or LOCK
position.
qOdometer, Trip Meter and Trip
Meter Selector
The headlight switch must be in the
or
position to see the display.
The display mode can be changed
between trip meter A and trip meter B by
pressing the selector while one of them is
displayed. The selected mode will be
displayed.
l
Displays for 10 minutes after the
ignition switch is turned to the ACC
or LOCK position from the ON
position.
l
Displays for 10 minutes after any
door is opened.
Odometer
Odometer
Selector
The odometer records the total distance
the vehicle has been driven.
Trip meter
Trip meter
The trip meter can record the total
distance of two trips. One is recorded in
trip meter A, and the other is recorded in
trip meter B.
Odometer
For instance, trip meter A can record the
distance from the point of origin, and trip
meter B can record the distance from
where the fuel tank is filled.
Trip meter A
Press the selector
Odometer
When trip meter A is selected, pressing
the selector again within one second will
change to trip meter B mode.
Trip meter B
When trip meter A is selected, TRIP A
will be displayed. When trip meter B is
selected, TRIP B will be displayed.
Press the selector
5-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page160
Tuesday, May 9 2006 10:44 AM
Black plate (160,1)
Driving Your Mazda
Instrument Cluster and Indicators
The trip meter records the total distance
the vehicle is driven until the meter is
again reset. Return it to “0.0” by holding
the selector depressed for more than 1
second. Use this meter to measure trip
distances and to compute fuel
q
Engine Coolant Temperature Gauge
The engine coolant temperature gauge
shows the temperature of the engine
coolant.
consumption.
NOTE
l
Only the trip meters record tenths of
kilometers (miles).
l
The trip record will be erased when:
l
The power supply is interrupted
(blown fuse or the battery is
disconnected).
The vehicle is driven over 999.9
l
If the needle is near H, it indicates
overheating.
km (mile).
qTachometer
CAUTION
The tachometer shows engine speed in
thousands of revolutions per minute
(rpm).
Driving with an overheated engine can
cause serious engine damage (page
Red zone
CAUTION
Don't run the engine with the
tachometer needle in the RED ZONE.
This may cause severe engine damage.
5-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page161
Tuesday, May 9 2006 10:44 AM
Black plate (161,1)
Driving Your Mazda
Instrument Cluster and Indicators
qFuel Gauge
Bright
Dim
The fuel gauge shows approximately how
much fuel is in the tank. We recommend
keeping the tank over 1/4 full. When the
low fuel warning light illuminates or
when the needle is near E, refuel as soon
as possible.
Canceling the illumination dimmer
Low fuel
warning light
When the headlight switch is in the or
position, the illumination of the
instrument cluster and the information
display dims.
When driving on snowy or foggy roads,
or in other situations when the instrument
cluster or information display's visibility
is reduced due to glare from surrounding
brightness, cancel the illumination
dimmer and increase the illumination
intensity.
NOTE
The direction of the arrow ( ) shown
that the fuel-filler lid is on the left side
of the vehicle.
To cancel the illumination dimmer, rotate
the thumb wheel upward fully. You may
hear a click sound and the illumination
dimmer will be canceled.
qDashboard Illumination
Rotate the thumb wheel to adjust the
brightness of the instrument cluster and
other illuminations in the dashboard.
NOTE
NOTE
If the dashboard illumination switch is
kept at the illumination dimmer cancel
position, the instrument cluster and the
information display will not dim when
the headlight switch is turned to the
l
The brightness of dashboard
illuminations (except instrument
cluster) can be adjusted when the
headlight switch is in the or
position.
or
position again.
l
The brightness of the instrument
cluster illumination can be adjusted
when the headlight switch is in any
position.
5-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page162
Tuesday, May 9 2006 10:44 AM
Black plate (162,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Warning/Indicator Lights
Warning/Indicator lights will appear in any of the highlighted areas
Signal
Warning/Indicator Lights
Brake System Warning Light
Page
Charging System Warning Light
Engine Oil Pressure Warning Light
Check Engine Light
ABS Warning Light
Air Bag/Front Seat Belt Pretensioner System Warning Light
Low Fuel Warning Light
5-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page163
Tuesday, May 9 2006 10:44 AM
Black plate (163,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Signal
Warning/Indicator Lights
Seat Belt Warning Light/Beep
Page
Door-Ajar Warning Light
Low Washer Fluid Level Warning Light
AWD Warning Light
KEY Warning Light (Red)/KEY Indicator Light (Green)
Security Indicator Light
Headlight High-Beam Indicator Light
TCS/DSC Indicator Light
DSC OFF Indicator Light
Cruise Main Indicator Light
Cruise Set Indicator Light
Light-On Indicator Light
Turn Signal/Hazard Warning Indicator Lights
5-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page164
Tuesday, May 9 2006 10:44 AM
Black plate (164,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
qBrake System Warning Light
NOTE
Having to add brake fluid is sometimes
an indicator of leakage. Consult an
Authorized Mazda Dealer as soon as
possible even if the brake light is no
longer illuminated.
This warning has the following functions:
WARNING
Parking brake warning
Do not drive with the brake system
warning light illuminated. Contact an
Authorized Mazda Dealer to have the
brakes inspected as soon as possible:
Driving with the brake system warning
light illuminated is dangerous. It
indicates that your brakes may not
work at all or that they could
completely fail at any time. If this light
remains illuminated, after checking
that the parking brake is fully
released, have the brakes inspected
immediately.
The light comes on when the parking
brake is applied with the ignition switch
in the START or ON position. It goes off
when the parking brake is fully released.
Low brake fluid level warning
If the light stays on after the parking brake
is fully released, you may have a brake
problem.
Drive to the side of the road and park off
the right-of-way.
You may notice that the pedal is harder to
push or that it may go closer to the floor.
In either case, it will take longer to stop
the vehicle.
qABS Warning Light
1. With the engine stopped, check the
brake fluid level immediately and add
fluid as required (page 8-17).
2. After adding fluid, check the light
again.
The warning light stays on for a few
seconds when the ignition switch is turned
to the ON position.
If the warning light remains on, or if the
brakes do not operate properly, do not
drive the vehicle. Have it towed to an
Authorized Mazda Dealer.
Even if the light goes out have your brake
system inspected as soon as possible by
an Authorized Mazda Dealer.
5-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page165
Tuesday, May 9 2006 10:44 AM
Black plate (165,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
If the ABS warning light stays on while
you're driving, the ABS control unit has
detected a system malfunction. If this
occurs, your brakes will function normally
as if the vehicle had no ABS.
Should this happen, consult an Authorized
Mazda Dealer as soon as possible.
WARNING
Do not drive with both the ABS
warning light and brake warning light
illuminated. Have the vehicle towed to
an Authorized Mazda Dealer to have
the brakes inspected as soon as
possible:
NOTE
Driving when the brake system
warning light and ABS warning light
are illuminated at the same time is
dangerous.
When both lights are illuminated, the
rear wheels could lock more quickly in
an emergency stop than under normal
circumstances.
When the engine is jump-started to
charge the battery, uneven rpm occurs
and the ABS warning light comes on.
This is due to a weak battery, not a
malfunction.
Recharge the battery.
qElectronic Brake Force
Distribution System Warning
qCharging System Warning Light
If the electronic brake force distribution
control unit determines that some
components are operating incorrectly, the
control unit may turn the brake system
warning light and the ABS warning light
on at the same time. The problem is likely
to be an electronic brake force distribution
system.
This warning light illuminates when the
ignition switch is turned to the ON
position and turns off when the engine is
started.
If the warning light illuminates while
driving, it indicates a malfunction of the
alternator or of the charging system.
Drive to the side of the road and park off
the right-of-way. Consult an Authorized
Mazda Dealer.
5-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page166
Tuesday, May 9 2006 10:44 AM
Black plate (166,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
CAUTION
CAUTION
Don't continue driving when the
charging system warning light is
illuminated because the engine could
stop unexpectedly.
Don't run the engine if oil pressure is
low. It could result in extensive engine
damage.
qCheck Engine Light
q
Engine Oil Pressure Warning Light
This indicator light illuminates when the
ignition switch is turned to the ON
position and goes off when the engine is
started.
This warning light illuminates when the
ignition switch is turned to the ON
position and turns off when the engine is
started.
If this light comes on while driving, the
vehicle may have a problem. It is
important to note the driving conditions
when the light came on and consult an
Authorized Mazda Dealer.
This warning light indicates low engine
oil pressure.
If the light illuminates while driving:
1. Drive to the side of the road and park
off the right-of-way on level ground.
The check engine light may come on in
the following cases:
2. Turn off the engine and wait 5 minutes
for the oil to drain back into the oil
pan.
l
The fuel tank level being very low or
approaching empty.
l
The engine's electrical system has a
problem.
3. Inspect the engine oil level (page 8-14).
If it's low, add oil.
l
The emission control system has a
problem.
4. Start the engine and check the warning
light.
l
The fuel-filler cap is missing or not
If the light remains illuminated even after
you add oil, stop the engine immediately
and have your vehicle towed to an
Authorized Mazda Dealer.
tightened securely.
If the check engine light remains on or
flashes continuously, do not drive at high
speeds and consult an Authorized Mazda
Dealer as soon as possible.
5-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page167
Tuesday, May 9 2006 10:44 AM
Black plate (167,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
q
Air Bag/Front Seat Belt
Pretensioner System Warning Light
qLow Fuel Warning Light
Low fuel
warning light
This warning light in the fuel gauge
signals that the fuel tank will soon be
empty.
If the air bag/front seat belt pretensioner
system is working properly, the warning
light illuminates when the ignition switch
is turned to the ON position or after the
engine is cranked. The warning light turns
off after a specified period of time.
Refuel as soon as possible.
qSeat Belt Warning Light/Beep
A system malfunction is indicated if the
warning light constantly flashes,
constantly illuminates or does not
illuminate at all when the ignition switch
is turned to the ON position. If either of
these occur, consult an Authorized Mazda
Dealer as soon as possible. The system
may not work in an accident.
The seat belt warning light illuminates
and a beep sound will be heard if the
driver's seat belt is not fastened when the
ignition switch is turned to the ON
position.
WARNING
Conditions of operation
Never tamper with the air bag/
pretensioner systems and always have
an Authorized Mazda Dealer perform
all servicing and repairs:
Self-servicing or tampering with the
systems is dangerous. An air bag/
pretensioner could accidentally
activate or become disabled causing
serious injury or death.
Condition
Result
The driver's seat belt is not The warning light
fastened when the ignition flashes and a beep
switch is turned to the ON sound will be heard
position.
for about 6 seconds.
The driver's seat belt is
fastened while the warning
light and the beep sound are
activated.
The warning light
turns off and the beep
sound stops.
The driver's seat belt is
The warning light will
fastened before the ignition not illuminate and the
switch is turned to the ON beep sound will not be
position.
heard.
5-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page168
Tuesday, May 9 2006 10:44 AM
Black plate (168,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
Belt minder
NOTE
Driver seated/Front passenger seated
The seat belt warning light/beep reminds
the front passenger to fasten the seat belt
according to the chart below.
The belt minder can be deactivated.
Consult an Authorized Mazda Dealer to
deactivate and restore the seat belt
minder.
Vehicle speed
Between 0 ― 20
km/h
20 km/h
(12 mph) or
more
Condition
(0 ― 12 mph)
Seat belt
(Driver)
Driver seated/Front passenger not
seated
Seat belt
(Passenger)
The belt minder is a supplemental
warning to the seat belt warning function.
If the driver's seat belt is not fastened
when the ignition switch is turned to the
ON position, the warning light/beep
operates to give you further reminders
according to the chart below.
Indicator
Beep
: Fastened
: Unfastened
: Illuminated
: Flashing
: Beep
Vehicle speed
Between 0 ― 20
km/h
(0 ― 12 mph)
20 km/h
(12 mph) or
more
Condition
Once the beep sound is heard, it continues
sounding even if the vehicle speed lowers
to 20 km/h (12 mph) or less until the
seatbelt is fastened or the beep sound
period has passed.
Seat belt
Indicator
Beep
NOTE
: Fastened
: Unfastened
: Illuminated
: Flashing
: Beep
l
To allow the front passenger seat
weight sensor to function properly,
do not place and sit on an additional
seat cushion on the front passenger
seat. The sensor may not function
properly because the additional seat
cushion could cause sensor
Once the beep sound is heard, it continues
sounding even if the vehicle speed lowers
to 20 km/h (12 mph) or less until the
seatbelt is fastened or the beep sound
period has passed.
interference.
l
Placing packages, luggage, pets or
other items on the front passenger
seat may cause the front passenger
belt minder warning light and beep
to operate depending on the weight
of the item.
5-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page169
Tuesday, May 9 2006 10:44 AM
Black plate (169,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
l
Flashes when the differential oil
temperature is abnormally high.
qDoor-Ajar Warning Light
l
Flashes when there are continually
large differences between front and rear
wheel rotation, such as when trying to
pull away from an icy surface.
If the AWD warning light illuminates:
If the AWD warning light illuminates,
contact an Authorized Mazda Dealer.
This warning light comes on when any
door isn't securely closed.
If the AWD warning light flashes:
qLow Washer Fluid Level
Park the vehicle in a safe place. After a
few moments; if the warning light stops
flashing, you can resume driving. If the
light does not stop flashing, contact an
Authorized Mazda Dealer.
Warning Lightí
WARNING
Never spin a wheel that is off the
ground:
This warning light indicates that little
washer fluid remains. Add fluid (page
Spinning a wheel that is off the
ground as a result of the vehicle being
stuck or in a ditch is dangerous. The
drive assembly could be seriously
damaged which could lead to an
accident or could even lead to
overheating, oil leakage, and a fire.
qAWD Warning Light
qKEY Warning Light (Red)/KEY
Indicator Light (Green)
This warning light stays on for a few
seconds when the ignition switch is turned
to the ON position.
Thereafter, the warning light will
illuminate or flash under the following
conditions:
l
Illuminates when there is an
This indicator has two colors.
abnormality with the AWD system.
íSome models.
5-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page170
Tuesday, May 9 2006 10:44 AM
Black plate (170,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
l
KEY Warning Light (Red)
When illuminated
Under the following conditions, the
KEY warning light (red) will flash
continuously when the start knob has
not been returned to the LOCK
position to notify the driver that the
advanced key has been removed from
the vehicle. It will stop flashing when
the advanced key is back inside the
vehicle.
l
When the ignition switch is turned to
the ON position, it illuminates
momentarily and then goes out.
l
If any malfunction occurs in the
advanced keyless system, it illuminates
continuously.
l
The start knob has not been returned
to the LOCK position, the driver's
door is open, and the advanced key
is removed from the vehicle.
WARNING
l
Do not drive the vehicle with the KEY
warning light illuminated:
The start knob has not been returned
to the LOCK position and all the
doors are closed after removing the
advanced key from the vehicle.
If the KEY warning light remains
illuminated, do not continue to drive
using the advanced key system. Park
the vehicle in a safe place and use the
auxiliary key to continue driving the
vehicle. Have the vehicle inspected at
an Authorized Mazda Dealer as soon
as possible.
NOTE
The flashing KEY warning light (red)
and the beep sound operate
simultaneously (page 3-19).
When flashing
KEY Indicator Light (Green)
When illuminated
l
Under the following conditions, the
KEY warning light (red) flashes to
inform the driver that the start knob
will not rotate to the ACC position
even if it is pushed in from the LOCK
position.
When the start knob is pushed in from the
LOCK position, the system confirms that
the correct advanced key is inside the
vehicle, the KEY indicator light (green)
illuminates, and the start knob can be
turned to the ACC position (page 3-10).
l
The advanced key battery is dead.
The advanced key is not within
l
When flashing
operational range.
The advanced key is placed in areas
l
When the advanced key battery power is
low, the KEY indicator light flashes for 30
seconds after the start knob is turned from
the ON position to the ACC or LOCK
position. Replace with a new battery
before the advanced key becomes
unusable (page 3-6).
where it is difficult for the system to
detect the signal (page 3-7).
A key from another manufacturer
l
similar to the advanced key is in the
operational range.
5-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page171
Tuesday, May 9 2006 10:44 AM
Black plate (171,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
qHeadlight High-Beam Indicator
NOTE
Light
The advanced key can be set so that the
KEY indicator light (green) does not
flash even if the battery power is low.
Refer to Setting Change (Function
Customization)(page 3-18).
qSecurity Indicator Light
This light indicates one of two things:
l
The high-beam headlights are on.
l
The turn signal lever is in the flash-to-
pass position.
qTCS/DSC Indicator Light
This indicator light starts flashing every 2
seconds when the ignition switch is turned
from the ON to the ACC position and the
immobilizer system is armed.
The light stops flashing when the ignition
switch is turned to the ON position with
the correct ignition key.
At this time, the immobilizer system is
disarmed and the light illuminates for
about 3 seconds and then goes out.
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position. If the TCS or DSC is
operating, the indicator light flashes.
If the engine doesn't start with the correct
ignition key, and the security indicator
light keeps illuminating or flashing, the
system may have a malfunction. Consult
an Authorized Mazda Dealer.
If the light stays on, the TCS, DSC or the
brake assist system may have a
malfunction and they may not operate
correctly. Take your vehicle to an
Authorized Mazda Dealer.
5-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page172
Tuesday, May 9 2006 10:44 AM
Black plate (172,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
qDSC OFF Indicator Light
qLight-On Indicator Light
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position.
This indicator light comes on when the
exterior lights and dashboard illumination
are on.
It also comes on when the DSC OFF
switch is pressed and TCS/DSC is
switched off (page 5-19).
qTurn-Signal/Hazard Warning
Indicator Lights
If the light stays on when the TCS/DSC is
not switched off, take your vehicle to an
Authorized Mazda Dealer. The dynamic
stability control may have a malfunction.
qCruise Main Indicator Light
When operating the turn signal lights, the
left or right turn signal indicator light
flashes to indicate which turn signal light
is operating (page 5-38).
When operating the hazard warning
lights, both turn signal indicator lights
flash (page 5-42).
This light comes on when the ON/OFF
switch is pressed and the cruise control
system is activated.
NOTE
If an indicator light remains illuminated
(does not flash) or if it flashes
abnormally, one of the turn signal bulbs
may be burned out.
qCruise Set Indicator Light
This light comes on when a cruising speed
is set.
5-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page173
Tuesday, May 9 2006 10:44 AM
Black plate (173,1)
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
qAdvanced Keyless Warningí
Beep Sounds
Warning indicators for the advanced key,
such as “the advanced key removed from
vehicle warning”, use a beep sound and
warning/indicator lights in the instrument
cluster.
qSeat Belt Warning Beep
If the driver's seat belt is not fastened
when the ignition switch is turned to the
ON position, a beep sound will be heard
for about 6 seconds.
If the driver's seat belt is not fastened and
the vehicle is driven at a speed faster than
about 20 km/h (12 mph), a beep sound
will be heard again for a specified period
of time.
Refer to Warning and Beep Sounds on
page 3-16.
Refer to Seat Belt Warning Light/Beep on
page 5-29.
qIgnition Key Reminder
If the ignition switch is in the LOCK or
ACC position with the key inserted, a
continuous beep sound will be heard
when the driver's door is opened.
qLights-On Reminder
If lights are on and the key is removed
from the ignition switch, a continuous
beep sound will be heard when the
driver's door is opened.
NOTE
When the advanced keyless function is
used and the start knob is in the ACC
position, the “Start Knob Not in LOCK
the lights-on reminder.
íSome models.
5-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page174
Tuesday, May 9 2006 10:44 AM
Black plate (174,1)
Driving Your Mazda
Switches and Controls
Xenon fusion headlight bulbs
Lighting Control
The low-beam bulbs of the headlights
have xenon fusion bulbs that produce a
bright white beam over a wide area.
WARNING
Do not replace the xenon fusion bulbs
yourself:
Replacing the xenon fusion bulbs
yourself is dangerous. Because the
xenon fusion bulbs require high
voltage, you could receive an electric
shock if the bulbs are handled
incorrectly. Consult an Authorized
Mazda Dealer when the replacement is
necessary.
qHeadlights
To turn on the lights, turn the headlight
switch on the end of the control lever.
Switch Position
NOTE
Headlights
Off
Off
Off
On
On
On
Taillights
If the headlights flicker, or the
brightness weakens, the bulb-life may
be depleted and a replacement is
necessary. Consult an Authorized
Mazda Dealer.
Parking lights
License lights
Side-marker lights
Dashboard
illumination
NOTE
qLights-On Reminder
l
If the light switch is left on, the lights
will automatically switch off 30
seconds after turning the ignition
switch to the LOCK position or
removing the key.
If lights are on and the key is removed
from the ignition switch, a continuous
beep sound will be heard when the
driver's door is opened.
NOTE
The lights will automatically switch
back on when the ignition switch is
turned to the ACC or ON position.
When the advanced keyless function is
used and the start knob is in the ACC
position, the “Start Knob Not in LOCK
the lights-on reminder.
l
To prevent discharging the battery,
don't leave the lights on while the
engine is off unless safety requires
them.
5-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page175
Tuesday, May 9 2006 10:44 AM
Black plate (175,1)
Driving Your Mazda
Switches and Controls
qHeadlight High-Low Beam
qHeadlight Leveling
Push the lever forward for high beam.
Pull back to original position for low
beam.
The number of passengers and weight of
cargo in the luggage compartment change
the angle of the headlights.
The headlight leveling switch adjusts this
angle.
High beam
Low beam
qFlashing the Headlights
Select the proper setting from the following chart.
To flash the headlights, pull the lever fully
toward you. The headlight switch does
not need to be on, and the lever will return
to the normal position when released.
Front seat
Rear
seat
Switch
Position
Load
Driver Passenger
×
×
×
×
×
―
×
―
―
×
―
―
―
×
0
0
1
2
3
×
×
×
―
―
×
×: Yes
―: No
q
Daytime Running Lights (Canada)
In Canada, vehicles must be driven with
the headlights on during daytime
operation.
For that reason, the daytime running lights
automatically turn on when the ignition
switch is turned to the ON position.
NOTE
The Daytime Running Lights turn off
when the parking brake is applied.
5-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page176
Tuesday, May 9 2006 10:44 AM
Black plate (176,1)
Driving Your Mazda
Switches and Controls
Fog Lights
Turn and Lane-Change
Signals
Use this switch to turn on the fog lights.
They help you to see as well as to be seen.
qTurn Signal
To turn the front fog lights on, rotate the
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
fog light switch to the
position.
The headlight switch must be in the
position to turn on the front fog lights.
If the indicator light continues to flash
after a turn, manually return the lever to
its original position.
Right turn
Right lane
change
Fog light switch
OFF
Left lane
change
To turn them off, rotate the fog light
switch to the OFF position or turn the
headlight switch to the or OFF
position.
Left turn
Green indicators on the dashboard show
which signal is working.
NOTE
Lane-change signals
The fog lights will turn off when the
headlights are set at high beam.
Move the lever slightly toward the
direction of the change ―until the
indicator flashes― and hold it there. It
will return to the off position when
released.
NOTE
If an indicator light stays on without
flashing or if it flashes abnormally, one
of the turn signal bulbs may be burned
out.
5-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page177
Tuesday, May 9 2006 10:44 AM
Black plate (177,1)
Driving Your Mazda
Switches and Controls
NOTE
Windshield Wipers and
Washer
Because heavy ice and snow can jam
the wiper blades, the wiper motor is
protected from motor breakdown,
overheating and possible fire by a
circuit breaker. This mechanism will
automatically stop operation of the
blades, but only for about 5 minutes.
If this happens, turn off the wiper
switch and park off the right-of-way,
and remove the snow and ice.
After 5 minutes, turn on the switch and
the blades should operate normally. If
they don't resume functioning, consult
an Authorized Mazda Dealer as soon as
possible. Drive to the side of the road
and park off the right-of-way. Wait until
the weather clears before trying to drive
with the wipers inoperative.
The ignition switch must be in the ON
position.
WARNING
Use only windshield washer fluid or
plain water in the reservoir:
Using radiator antifreeze as washer
fluid is dangerous. If sprayed on the
windshield, it will dirty the windshield,
affect your visibility, and could result
in an accident.
Do not use the washer without first
warming the windshield and never use
plain tap water:
Using windshield washer fluid without
anti-freeze protection in freezing
temperatures is dangerous. The
washer fluid could freeze on the
windshield and block your vision. You
could have an accident.
qWindshield Wipers
Turn the wipers on by pulling the lever
down.
MIST ― Mist
INT ― Intermittent
1 ― Low speed
2 ― High speed
For a single wiping cycle, push the lever
up to MIST.
5-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page178
Tuesday, May 9 2006 10:44 AM
Black plate (178,1)
Driving Your Mazda
Switches and Controls
Variable-speed intermittent wipers
Rear Window Defroster
Set the lever to INT and choose the
interval timing by rotating the ring.
The rear window defroster clears frost,
fog, and thin ice from the rear window.
The ignition switch must be in the ON
position.
OFF
INT
Press the switch to turn on the rear
window defroster. The rear window
defroster operates for about 15 minutes
and turns off automatically.
INT ring
The indicator light illuminates during
operation.
To turn off the rear window defroster
before the 15 minutes has elapsed, press
the switch again.
qWindshield Washer
Pull the lever toward you and hold it to
spray washer fluid.
OFF
Washer
CAUTION
NOTE
Don't use sharp instruments or window
cleaners with abrasives to clean the
inside of the rear window surface. They
may damage the defroster grid inside
the window.
With the wiper lever in the OFF or INT
position, the wipers will operate
continuously until the lever is released.
If the washer doesn't work, inspect the
an Authorized Mazda Dealer.
5-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page179
Tuesday, May 9 2006 10:44 AM
Black plate (179,1)
Driving Your Mazda
Switches and Controls
NOTE
Horn
This defroster is not designed for
melting snow. If there is an
accumulation of snow on the rear
window, remove it before using the
defroster.
To sound the horn, press the
the steering wheel.
mark on
5-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page180
Tuesday, May 9 2006 10:44 AM
Black plate (180,1)
Driving Your Mazda
Switches and Controls
Hazard Warning Flasher
The hazard warning lights should always
be used when you stop on or near a
roadway in an emergency.
The hazard warning lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.
Depress the hazard warning flasher and all
the turn signals will flash.
NOTE
l
The turn signals don't work when the
hazard warning lights are on.
l
Check local regulations about the use
of hazard warning lights while the
vehicle is being towed. They may
forbid it.
5-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page182
Tuesday, May 9 2006 10:44 AM
Black plate (182,1)
Interior Comfort
Climate Control System
qParking in Direct Sunlight
Operating Tips
If the vehicle has been parked in direct
sunlight during hot weather, open the
windows to let warm air escape, then run
the climate control system.
qOperating the Climate Control
System
Operate the climate control system with
the engine running.
qNot Using for a Long Period
Run the air conditioner about 10 minutes
at least once a month to keep internal
parts lubricated.
NOTE
To prevent the battery from being
discharged, do not leave the fan control
dial on for a long period of time with
the ignition switch in the ACC position
when the engine is not running.
qCheck the Refrigerant before the
Weather Gets Hot
Have the air conditioner checked before
the weather gets hot. Lack of refrigerant
may make the air conditioner less
qClearing the Air Inlet
efficient. Consult an Authorized Mazda
Dealer for refrigerant inspection.
Clear all obstructions like leaves, snow
and ice from the hood and the air inlet in
the cowl grille to improve the system
efficiency.
The air conditioner is filled with
HFC134a (R134a), a refrigerant that will
not damage the ozone layer.
If the air conditioner is low on refrigerant
or has a malfunction, consult an
Authorized Mazda Dealer.
qFoggy Windows
The windows may fog up easily in humid
weather. Use the climate control system to
defog the windows.
q
Replacement of the Cabin Air Filter
To help defog the windows, operate the
air conditioner to dehumidify the air.
If your vehicle is equipped with an air
filter for the air conditioner, it is necessary
to change the filter periodically as
indicated in scheduled maintenance (page
8-3). Consult an Authorized Mazda
Dealer for replacement of the cabin air
filter.
NOTE
The air conditioner may be used along
with the heater to dehumidify the air.
qOutside/Recirculated Air Position
Use the outside air position in normal
conditions. The recirculated air position
should be used only when driving on
dusty roads or for quick cooling of the
interior.
6-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page183
Tuesday, May 9 2006 10:44 AM
Black plate (183,1)
Interior Comfort
Climate Control System
Vent Operation
2. Rotate the air vent left and right to
adjust the direction of airflow.
qAdjusting the Vents
Directing airflow
1. Press the upper part of the air vent to
open it.
NOTE
When using the air conditioner, mist
may come out from the vents. This is
not a sign of trouble but a result of
humid air being suddenly cooled.
6-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page184
Tuesday, May 9 2006 10:44 AM
Black plate (184,1)
Interior Comfort
Climate Control System
qSelecting the Airflow Mode
Dashboard Vents
Defroster and Floor Vents
Dashboard and Floor Vents
Defroster Vents
Floor Vents
6-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page185
Tuesday, May 9 2006 10:44 AM
Black plate (185,1)
Interior Comfort
Climate Control System
Control Panel
Climate control information is displayed on the information display.
l
Selection of airflow mode
qControl Switches
l
l
Outside/Recirculated air selection
Air conditioner operation
AUTO switch
NOTE
AUTO switch indicator light
l
When on, it indicates AUTO
operation, and the system will
function automatically.
By pressing the AUTO switch the
following functions will be automatically
controlled in accordance with the set
temperature:
l
When off, it indicates the operation
of other switches such as the mode
selector switch, fan control dial, A/C
switch and windshield defroster
switch. Other functions will continue
to operate automatically.
l
Airflow temperature
Amount of airflow
l
6-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page186
Tuesday, May 9 2006 10:44 AM
Black plate (186,1)
Interior Comfort
Climate Control System
OFF switch
Mode selector switch
Pressing the OFF switch shuts off the
climate control system.
The desired airflow mode can be selected
(page 6-4).
Temperature control dial
NOTE
l
With the airflow mode set to
position and the temperature control
dial set at a medium temperature,
heated air is directed to the feet and a
comparably lower air temperature
will flow through the central, left and
right vents.
Cold
Hot
l
This dial controls temperature.Turn it
clockwise for hot and counterclockwise
for cold.
To set the air vent to
windshield defroster switch.
, press the
A/C switch
Fan control dial
Slow
Fast
With the AUTO or fan control dial ON,
press the A/C switch to select the air
conditioning (cooling/dehumidifying
functions) on or off.
The fan has seven speeds. The selected
speed will be displayed.
6-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page187
Tuesday, May 9 2006 10:44 AM
Black plate (187,1)
Interior Comfort
Climate Control System
Windshield defroster switch
NOTE
The air conditioner may not function
when the outside temperature
approaches 0 °C (32 °F). (Indicator
remains on even when system is off.)
Air intake selector
Press the switch to defrost the windshield
and front door windows.
qOperation of Automatic Air
Conditioning
1. Press the AUTO switch. Selection of
the airflow mode, air intake selector
and amount of airflow will be
automatically controlled.
Outside or recirculated air positions can
be selected. Press the switch to select
outside/recirculated air positions.
Recirculated air position (
)
Use this position when going through
tunnels, driving in congested traffic (high
engine exhaust areas) or when quick
cooling is desired.
Outside air position (
)
Use this position for normal conditions
and defogging.
2. Use the temperature control dial to
select a desired temperature.
WARNING
Do not use the
or rainy weather:
Using the
position in cold
Cold
Hot
position in cold or
rainy weather is dangerous as it will
cause the windows to fog up. Your
vision will be hampered, which could
lead to a serious accident.
To turn off the system, press the OFF
switch.
6-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page188
Tuesday, May 9 2006 10:45 AM
Black plate (188,1)
Interior Comfort
Climate Control System
NOTE
WARNING
l
Setting the temperature to maximum
high or low will not provide the
desired temperature at a faster rate.
Set the temperature control to the hot
or warm position when defogging (
position):
l
When selecting heat, the system will
Using the
position with the
restrict airflow until it has warmed to
prevent cold air from blowing out of
the vents.
temperature control set to the cold
position is dangerous as it will cause
the outside of the windshield to fog up.
Your vision will be hampered, which
could lead to a serious accident.
q
Windshield Defrosting and Defogging
NOTE
Use the temperature control dial to
increase the air flow temperature and
defog the windshield more quickly.
qSunlight/Temperature Sensor
The fully automatic air conditioner
function measures inside and outside
temperatures, and sunlight. It then sets
temperatures inside the passenger
compartment accordingly.
Press the windshield defroster switch.
In this position, the position is
automatically selected, and the air
conditioner automatically turns on
(however, the indicator light does not
illuminate). The air conditioner will
directly dehumidify the air to the front
windshield and side windows (page 6-4).
Airflow amount will be increased.
CAUTION
Do not obstruct either sensor, otherwise
the automatic air conditioner will not
operate properly.
6-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page189
Tuesday, May 9 2006 10:45 AM
Black plate (189,1)
Interior Comfort
Climate Control System
Sunlight sensor
Interior temperature sensor
6-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page190
Tuesday, May 9 2006 10:45 AM
Black plate (190,1)
Interior Comfort
Audio System
Antenna
Operating Tips for Audio
System
qDetachable Type
To remove the antenna, turn it
counterclockwise.
To install the antenna, turn it clockwise.
Make sure the antenna is securely
installed.
WARNING
Do not adjust the audio control
switches while driving the vehicle:
Adjusting the audio while driving the
vehicle is dangerous as it could
distract your attention from the vehicle
operation which could lead to a
serious accident. Always adjust the
audio while the vehicle is stopped.
Even if the audio control switches are
equipped on the steering wheel, learn
to use the switches without looking
down at them so that you can keep
your maximum attention on the road
while driving the vehicle.
Remove
Install
CAUTION
CAUTION
l
To prevent damage to the antenna,
For the purposes of safe driving, adjust
the audio volume to a level that allows
you to hear sounds outside of the
vehicle.
remove it before entering a car wash
facility or passing beneath a low
overhead clearance.
l
Be careful around the antenna when
removing snow from the roof.
Otherwise the antenna could be
damaged.
NOTE
l
Do not use the audio for long periods
of time while the engine is off.
Otherwise the battery could go dead.
NOTE
l
If a cellular phone or CB radio is
When leaving your vehicle unattended,
we recommend that you remove the
antenna and store it inside the vehicle.
used in or near the vehicle, it could
cause noise to occur from the audio
system, however, this does not
indicate that the system has been
damaged.
6-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page191
Tuesday, May 9 2006 10:45 AM
Black plate (191,1)
Interior Comfort
Audio System
Signals from an FM transmitter are similar
to beams of light because they do not
bend around corners, but they do reflect.
Unlike AM signals, FM signals cannot
travel beyond the horizon. Therefore, FM
stations cannot be received at the great
distances possible with AM reception.
qRadio Reception
AM characteristics
AM signals bend around such things as
buildings or mountains and bounce off the
ionosphere. Therefore, they can reach
longer distances than FM signals. Because
of this, two stations may sometimes be
picked up on the same frequency at the
same time.
Ionosphere
FM wave
AM wave
Ionosphere
FM wave
100—200 km (60—120 miles)
Atmospheric conditions can also affect
FM reception. High humidity will cause
poor reception. However, cloudy days
may provide better reception than clear
days.
Station 1
Station 2
FM characteristics
An FM broadcast range is usually about
40―50 km (25―30 miles) from the
source. Because of extra coding needed to
break the sound into two channels, stereo
FM has even less range than monaural
(non-stereo) FM.
Multipath noise
Since FM signals can be reflected by
obstructions, it is possible to receive both
the direct signal and the reflected signal at
the same time. This causes a slight delay
in reception and may be heard as a broken
sound or a distortion. This problem may
also be encountered when in close
FM Station
proximity to the transmitter.
40—50km
(25—30 miles)
Reflected wave
Direct
6-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page192
Tuesday, May 9 2006 10:45 AM
Black plate (192,1)
Interior Comfort
Audio System
Flutter/Skip noise
Strong signal noise
Signals from an FM transmitter move in
straight lines and become weak in valleys
between tall buildings, mountains, and
other obstacles. When a vehicle passes
through such an area, the reception
conditions may change suddenly, resulting
in annoying noise.
This occurs very close to a transmitter
tower. The broadcast signals are
extremely strong, so the result is noise and
sound breakup at the radio receiver.
Station drift noise
When a vehicle reaches the area of two
strong stations broadcasting at similar
frequencies, the original station may be
temporarily lost and the second station
picked up. At this time there will be some
noise from this disturbance.
Weak signal noise
In suburban areas, broadcast signals
become weak because of distance from
the transmitter. Reception in such fringe
areas is characterized by sound breakup.
Station 2
Station 1
88.1 MHz
88.3 MHz
6-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page193
Tuesday, May 9 2006 10:45 AM
Black plate (193,1)
Interior Comfort
Audio System
l
If the cassette tape is loose, it may
produce poor sound or performance
during playback. Use a pencil or
qOperating Tips for Cassette Tape
Player
Cleaning the cassette tape player
something similar to remove any slack.
The tape head, capstans, and pinch rollers
will gather oxide residue from cassette
tapes. This can cause weak or wavering
sounds and damage to the cassette tapes
and player. Use a good quality head-
cleaning tape or a liquid cleaner cassette
tape to remove it.
Should the unit not operate normally,
consult an Authorized Mazda Dealer.
Never attempt to repair it or insert a
screwdriver or anything else.
l
l
Only cassette tapes that play no longer
than 90 minutes should be used.
Cassette tape exceeding 90 minutes are
thin and may easily break.
Handling the cassette tape player
The following precautions should be
observed.
Do not leave a cassette tape in the tape
player slot when not in use. Remove it
completely to permit the slot door to
close and to protect the mechanism
from dust.
l
Do not spill any liquid on the audio
system.
l
Store cassette tapes away from extreme
heat, magnetic fields, and direct
sunlight. Protect the exposed cassette
tape from dirt and damage. Store
cassette tapes in their original cases or
other protective cases.
l
Do not insert any objects, other than
cassette tape, into the slot.
6-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page194
Tuesday, May 9 2006 10:45 AM
Black plate (194,1)
Interior Comfort
Audio System
l
The CD revolves at high speed within
the unit. Defective (cracked or badly
bent) CDs should never be used.
qOperating Tips for In-Dash CD
Changer
Condensation phenomenon
Immediately after turning on the heater
when the vehicle is cold, the CD or
optical components (prism and lens) in the
In-dash CD changer may become clouded
with condensation. At this time, the CD
will eject immediately when placed in the
unit. A clouded CD can be corrected
simply by wiping it with a soft cloth.
Clouded optical components will clear
naturally in about an hour. Wait for
normal operation to return before
l
Do not use non-conventional discs
such as heart-shaped, octagonal discs,
etc. The disc may not eject resulting in
a malfunction.
attempting to use the unit.
Handling the In-dash CD changer
The following precautions should be
observed.
l
Do not spill any liquid on the audio
system.
l
If the memory portion of the CD is
transparent or translucent, do not use
the disc.
l
Do not insert any objects, other than
CDs, into the slot.
Transparent
6-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page195
Tuesday, May 9 2006 10:45 AM
Black plate (195,1)
Interior Comfort
Audio System
l
l
A new CD may have rough edges on
its inner and outer perimeters. If a disc
with rough edges is used, proper
Use discs that have been legitimately
produced. If illegally-copied discs such
as pirated discs are used, the system
may not operate properly.
setting will not be possible and the In-
dash CD changer will not play the CD.
In addition, the disc may not eject
resulting in a malfunction. Remove the
rough edges in advance by using a ball-
point pen or pencil as shown below. To
remove the rough edges, rub the side of
the pen or pencil against the inner and
outer perimeter of the CD.
l
Be sure never to touch the signal
surface when handling the CDs. Pick
up a CD by grasping the outer edge or
the edge of the hole and the outer edge.
l
When driving over uneven surfaces,
the sound may jump.
l
l
Do not stick paper or tape on the CD.
Avoid scratching the reverse side (the
side without a label). The disc may not
eject resulting in a malfunction.
Dust, finger smudges, and dirt can
decrease the amount of light reflected
from the signal surface, thus affecting
sound quality. If the CD should
become soiled, gently wipe it with a
soft cloth from the center of the CD to
the edge.
l
The In-dash CD changer has been
designed to play CDs bearing the
identification logo as shown. No other
discs can be played.
6-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page196
Tuesday, May 9 2006 10:45 AM
Black plate (196,1)
Interior Comfort
Audio System
l
l
Do not use record sprays, antistatic
This unit may not be able to play
certain CD-R/CD-RWs made using a
computer or music CD recorder due to
disc characteristics, scratches,
smudges, dirt, etc., or due to dust or
condensation on the lens inside the
unit.
agents, or household spray cleaners.
Volatile chemicals such as benzine and
thinner can also damage the surface of
the CD and must not be used. Anything
that can damage, warp, or fog plastic
should never be used to clean CDs.
l
l
Insert discs one by one. If two discs are
inserted at the same time, the system
may not operate properly.
Storing CDs in the vehicle exposed to
direct sunlight or high temperature may
damage the CD-R/CD-RWs, and make
them unplayable.
l
CD TEXT textual information cannot
l
l
be displayed by audio units other than
the In-dash CD changer (MP3 support
type only). (Only playback is possible.)
CD-R/CD-RW exceeding 700 MB
cannot be played.
This unit may not be able to play
certain discs made using a computer
due to the application (writing
software) setting used. (For details,
consult the store where the application
was purchased.)
l
The following player can play MP3
files recorded in CD-ROM, CD-R, and
CD-RW.
· In-dash CD changer (MP3 file
support type only)
l
l
It is possible that certain text data, such
as titles, recorded on a CD-R/CD-RW
may not be displayed when musical
data (CD-DA) is playing.
l
The In-dash CD changer ejects the CD
if the CD is inserted upside down. Also
dirty and/or defective CDs may be
ejected.
The period from when a CD-RW is
inserted to when it begins playing is
longer than a normal CD or CD-R.
l
The In-dash CD changer is specially
made for 12 cm (5 in) CDs.
An 8 cm (3 in) CD can be played in the
In-dash CD changer if an 8 cm (3 in)
CD adapter is used.
If an 8 cm (3 in) CD adapter is not
used, the In-dash CD changer may be
damaged. Always use a CD adapter.
l
l
Completely read the instruction manual
and cautions for CD-R/CD-RWs.
Do not use discs with cellophane tape
adhering, partially peeled off labels, or
adhesive material exuding from the
edges of the CD label. Also, do not use
discs with a commercially-available
CD-R label affixed. The disc may not
eject resulting in a malfunction.
l
Do not insert cleaning discs in the In-
dash CD changer.
l
Do not insert any disc with a peel-off
seal affixed to it.
6-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page197
Tuesday, May 9 2006 10:45 AM
Black plate (197,1)
Interior Comfort
Audio System
l
This unit can play MP3 files that have
been recorded in bit rates of 8 kbps to
320 kbps. Nonetheless, to insure
enjoyment of music with consistent
sound quality, it is recommended to use
discs that have been recorded at a bit
rate of 128 kbps or more.
qOperating tips for MP3
NOTE
Supply of this product only conveys a
license for private, non-commercial use
and does not convey a license nor imply
any right to use this product in any
commercial (i.e. revenue-generating)
real time broadcasting (terrestrial,
satellite, cable and/or any other media),
broadcasting/streaming via the Internet,
intranets and/or other networks or in
other electronic content distribution
systems, such as pay-audio or audio-on-
demand applications. An independent
license for such use is required. For
details, please visit http://
l
If a disc has both music data (CD-DA)
and MP3 files, playback of the two file
types differs depending on how the
disc was recorded.
l
l
Packet written discs cannot be played
on this unit.
This unit does not play CDs recorded
using MP3i (MP3 interactive), MP3
PRO and RIFF MP3 formats.
www.mp3licensing.com.
l
This audio system handles MP3 files
that have been recorded on CD-R/CD-
RW/CD-ROMs. Discs that have been
recorded using the following formats
can be played:
l
ISO 9660 level 1
ISO 9660 level 2
Joliet extended format
Romeo extended format
l
l
l
l
This unit handles MP3 files
conforming to the MP3 format
containing both header frames and data
frames.
l
This unit can play multi-session
recorded discs that have up to 99
sessions.
l
This unit can play MP3s with sampling
frequencies of 16/22.05/24/32/44.1/48
kHz.
6-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page198
Tuesday, May 9 2006 10:45 AM
Black plate (198,1)
Interior Comfort
Audio System
l
l
About folders and files
MP3 files not conforming to the MP3
format containing both header frames
and data frames will be skipped and
not played.
l
The order of hierarchy for MP3 files
and folders during playback or other
functions is from shallow to deep. The
arrangement and playing order of a
recorded disc containing MP3 files is
as follows:
This unit will play MP3 files that have
up to eight levels. However, the more
levels a disc has, the longer it will take
to initially start playing. It is
recommended to record discs with two
levels or less.
l
File number
A numerical file number is assigned
to each file in a folder in the order of
hierarchy from shallow to deep.
l
l
l
A single disc with up to 999 files can
be played and a single folder with up to
255 files can be played.
l
Folder number
A numerical folder number is
assigned to each folder in the order
of hierarchy from shallow to deep.
When naming an MP3 file, be sure to
add an MP3 file extension (.mp3) after
the file name.
Folder
No.
The maximum number of characters
that can be used for file names is as
follows. However, this unit will only
display up to 30 characters, including
the file extension (.mp3).
01
02
04
3
Maximum number of
characters in a file name
(including a separator “.”
and the three letters of the
file extension)
03
2
05
ISO9660 level 1
12*
31*
4
ISO9660 level 2
06
Joliet extended
format
64
5
1
Romeo extended
format
128
* English one-byte characters (capitalized only) and
underbar “_” are available.
Level1 Level2 Level3 Level4
l
The folder order is automatically
assigned and this order cannot be
optionally set.
l
Any folder without an MP3 file will be
ignored. (It will be skipped and the
folder number will not be displayed.)
6-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page199
Tuesday, May 9 2006 10:45 AM
Black plate (199,1)
Interior Comfort
Audio System
Multi-session
CAUTION
A session is the complete amount of data
recorded from the beginning to the end of
a single period of CD-ROM, CD-R/CD-
RW data recording. Multi-session refers to
the existence of data from two or more
sessions on a single disc.
This unit can only play MP3 files that
have an MP3 file extension (.mp3)
attached. Do not attach an MP3 file
extension to any other type file as it
could cause noise to be emitted or a
malfunction in the unit.
Sampling
Refers to the process of encoding analog
audio data at regular intervals and
converting it to digital data. The sampling
rate refers to the number of times a
sample is taken in one second and is
expressed in Hz units. Increasing the
sampling rate improves the sound quality
but also increases the data size.
About ID3 Tag display
l
This unit can only display ID3 Tag
album, track and artist names that have
been input using Ver1.0/1.1/2.2/2.3
formats. Any other data that may have
been input cannot be displayed.
l
This unit can only display English
(including numerals) one-byte
characters. Use only English (including
numerals) one-byte characters when
inputting ID3 tags. Two-byte characters
and some special symbols cannot be
displayed.
Bit rate
Refers to the volume of data per second,
expressed in bps (bits per second).
Generally, the larger the number of the
transfer bit rate when compressing an
MP3 file, the more information regarding
musical reproduction it carries, and
therefore the better the sound quality.
Specialized glossary
MP3
Packet writing
Abbreviation for “MPEG Audio Layer 3”.
A technical standard for audio
compression as decided by an ISO
(International Organization for
Standardization) MPEG working group.
Use of MP3 allows for audio data to be
compressed to approximately a tenth of
the source data size.
A general term for the method, similar to
that used for floppy discs or hard drives,
of recording the required file in a single
increment on a CD-R and similar.
ID3 Tag
ID3 tag is a method for storing
information related to the music in an
MP3 file. Information such as track, artist
and album name can be stored. This
content can be freely edited using ID3
editing function software.
ISO 9660
An international standard for logical
formatting of CD-ROM files and folders.
It is divided into three separate levels
based on differences in file naming
procedures, data configuration and other
characteristics.
6-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page200
Tuesday, May 9 2006 10:45 AM
Black plate (200,1)
Interior Comfort
Audio System
VBR
Abbreviation for Variable Bit Rate. While
CBR (Constant Bit Rate) is generally
used, VBR varies the bit rate for audio
compression according to compression
conditions and this allows for
compression with preference given to
sound quality.
6-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page201
Tuesday, May 9 2006 10:45 AM
Black plate (201,1)
Interior Comfort
Audio System
Audio Set
In-Dash CD Changer (Music CD Player)
In-Dash CD Changer (Music CD/MP3 CD Player)
Cassette Tape Player
Illustration is of a representative audio unit.
Power/Volume/Sound Controls .............................................................................. page 6-22
6-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page202
Tuesday, May 9 2006 10:45 AM
Black plate (202,1)
Interior Comfort
Audio System
qPower/Volume/Sound Controls
Power/Volume dial
Audio control dial
Power ON/OFF
Turn the power/volume dial to the right to
increase volume, to the left to decrease it.
Turn the ignition switch to the ACC or
ON position.
Audio sound adjustment
1. Press the audio control dial to select the
function. The selected function will be
indicated.
Press the power/volume dial to turn the
audio system on.
Press the power/volume dial again to turn
the audio system off.
NOTE
To prevent the battery from being
discharged, do not leave the audio
system on for a long period of time
when the engine is not running.
Volume adjustment
Depending on the mode selected, the
indication changes.
To adjust the volume, turn the power/
volume dial.
6-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page203
Tuesday, May 9 2006 10:45 AM
Black plate (203,1)
Interior Comfort
Audio System
2. Turn the audio control dial to adjust the
selected functions as follows:
The following four modes are available.
Select the desired mode.
Mode
Volume change
Indication
Turn Left Turn Right
No change
Select mode
Decrease
bass
Increase
bass
Minimum
Medium
Decrease
treble
Increase
treble
Shift the
sound to the sound to the
Shift the
Maximum
front
rear
Turn the audio control dial to select the
ALC OFF, ALC LEVEL1―3 mode. The
selected mode will be indicated.
Shift the
sound to the sound to the
Shift the
left
right
OFF
ON
NOTE
About 5 seconds after selecting any
mode, the volume function will be
automatically selected. To reset bass,
treble, fade, and balance, press the
audio control dial for 2 seconds. The
unit will beep and “CLEAR” will be
displayed.
BEEP setting
Automatic Level Control (ALC)
The beep-sound when operating the audio
system can be set on or off.
The automatic level control is a feature
that automatically adjusts audio volume
and sound quality according to the vehicle
speed.
The volume increases in accordance with
the increase in vehicle speed, and
decreases as vehicle speed decreases.
6-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page204
Tuesday, May 9 2006 10:45 AM
Black plate (204,1)
Interior Comfort
Audio System
qOperating the Radio
Band selector buttons
Satellite button
Scan button
Seek tuning
button
Auto memory
button/Electric
serial number
button
Manual tuning dial
Channel preset buttons
Radio ON
Tuning
Press a band selector button (
to turn the radio on.
,
)
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
Band selection
Choose AM by pressing the AM button
) and FM by pressing the FM1/2
button ( ).
(
NOTE
The selected mode will be indicated. If
FM stereo is being received, “ST” will be
displayed.
If the power supply is interrupted (fuse
blows or the battery is disconnected),
the preset channels will be canceled.
NOTE
Manual tuning
Turning the manual tuning dial will
change the frequency higher or lower.
If the FM broadcast signal becomes
weak, reception automatically changes
from STEREO to MONO for reduced
noise, and the “ST” indicator will go
out.
6-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page205
Tuesday, May 9 2006 10:45 AM
Black plate (205,1)
Interior Comfort
Audio System
Seek tuning
Auto memory tuning
Pressing the seek tuning button (
will cause the tuner to seek a higher or
lower frequency automatically.
,
)
This is especially useful when driving in
an area where the local stations are not
known. Additional AM/FM stations can
be stored without disturbing the
previously set channels.
NOTE
If you continue to press and hold the
button, the frequency will continue
changing without stopping.
Press and hold the auto memory button
(
) for about 2 seconds until a beep
sound is heard; the system will
automatically scan and temporarily store
up to 6 stations with the strongest
frequencies in each selected band in that
area.
Scan tuning
Press the scan button (
) to
automatically sample strong stations.
Scanning stops at each station for about 5
seconds. To hold a station, press the scan
After scanning is completed, the station
with the strongest frequency will be tuned
and its frequency displayed.
button (
) again during this interval.
Press and release the auto memory button
Preset channel tuning
(
) to recall stations from the auto-
The 6 preset channels can be used to store
6 AM and 12 FM stations.
stored stations. One stored station will be
selected each time; its frequency and
channel number will be displayed.
1. To set a channel first select AM, FM1,
or FM2. Tune to the desired station.
NOTE
2. Depress a channel preset button for
about 2 seconds until a beep sound is
heard. The preset channel number and
station frequency will be displayed.
The station is now held in the memory.
If no stations can be tuned after
scanning operations, “A” will be
displayed.
3. Repeat this operation for the other
stations and bands you want to store.
To tune one in the memory, select AM,
FM1, or FM2 and then press its
channel preset button. The station
frequency and the channel number will
be displayed.
NOTE
If the power supply is interrupted (fuse
blows or the battery is disconnected),
the preset channels will be canceled.
6-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page206
Tuesday, May 9 2006 10:45 AM
Black plate (206,1)
Interior Comfort
Audio System
SATELLITE RADIO (SAT)
Vehicles equipped with the separately
purchased SIRIUS digital satellite radio
unit have the ability to receive up to 100
channels of digital quality programming
coast to coast via satellite. For information
on use, read the Satellite Radio Kit
manual accompanying the SIRIUS digital
satellite radio unit. A subscription to
SIRIUS digital satellite radio service is
required (available in the U.S. - Except
Alaska and Hawaii) to enable this feature
once the separately purchased SIRIUS
digital satellite radio unit has been
installed. For subscription information or
digital satellite radio technical issues
contact SIRIUS directly at:
- Web: www.siriusradio.com
- Phone (24 hrs/day, 7 days/week): 888-
539-SIRI (7474)
- E-mail: [email protected]
- Mailing Address: Sirius Satellite Radio
1221 Avenue Of The Americas
New York, NY 10020
Attention: Customer Care
Include your Sirius Radio ESN
(Electronic Serial Number) when
subscribing or requesting technical
assistance. See the Satellite Radio Kit
manual accompanying the SIRIUS unit
for complete satellite radio activation
procedures and information on how to
display the ESN#.
6-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page207
Tuesday, May 9 2006 10:45 AM
Black plate (207,1)
MEMO
6-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page208
Tuesday, May 9 2006 10:45 AM
Black plate (208,1)
Interior Comfort
Audio System
qOperating the Cassette Tape Playerí
Cassette tape play button
Fast-forward button
APC button:
(next program)
(one being
played)
Rewind
button
Cassette tape eject button
Repeat button
Program button
Dolby NR button
Cassette tape insert
Dolby noise reduction
Insert the cassette tape into the slot, open
edge to the right and cassette tape will
begin play, and “TAPE PLAY” will be
displayed. At the end of the cassette tape,
the unit automatically reverses cassette
When using a tape with Dolby NR*, push
the Dolby NR button ( ). The
symbol will be displayed. To play a tape
without Dolby NR, push the button once
again.
tape play. When
is lit, the cassette
tape's top side is playing. When
the bottom side is on.
is lit,
* Noise reduction system manufactured
under license from Dolby Laboratories
Licensing Corporation.
Dolby and the double-D symbol
are trademarks of Dolby Laboratories
Licensing Corporation.
Playing
Press the cassette tape play button
(
) to start play when a cassette tape
is in the unit. If there isn't a cassette tape
in the unit when the cassette tape play
Ejecting the cassette tape
button (
will flash on and off.
) is pressed, “NO TAPE”
Press the cassette tape eject button ( ) to
eject the cassette tape.
6-28
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page209
Tuesday, May 9 2006 10:45 AM
Black plate (209,1)
Interior Comfort
Audio System
NOTE
NOTE
The cassette tape can be ejected when
the ignition switch is in the OFF
position.
APC may not operate properly if:
l
A tape was recorded at a low level.
l
A tape has long, silent intervals.
l
Fast-forward/Rewind
A tape is a live recording.
Press the fast-forward button (
fast-forward.
) to
l
A tape has very short intervals of
less than 3 seconds.
Press the rewind button (
) to rewind.
To stop this operation and play the
cassette tape, press the button again.
Repeat play
This operation makes it possible to listen
to a selection repeatedly.
NOTE
Press the repeat button (
The current selection playing will be
repeated (“RPT” will be displayed).
Press the repeat button (
to cancel repeat play.
) during play.
When the cassette tape ends during fast-
forward or rewind, it automatically
stops and starts playing.
) once again
Reversing
Press the program button (
change cassette tape-play direction.
) to
NOTE
RPT may not operate properly if:
NOTE
l
A tape was recorded at a low level.
l
When the cassette tape ends, the unit
automatically reverses play.
A tape has long, silent intervals.
l
A tape is a live recording.
l
A tape has very short intervals of
less than 3 seconds.
Automatic program control (APC)
APC is used to find the beginning of
either the next program or the one being
played.
Press the APC button ( ) to the
beginning of the next selection.
Press the APC button ( ) to the
beginning of the one being played. To
stop this operation and play the cassette
tape, press the button again.
6-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page210
Tuesday, May 9 2006 10:45 AM
Black plate (210,1)
Interior Comfort
Audio System
qOperating the In-Dash CD Changerí
(Music CD player)
Channel preset buttons
CD play button
(Music CD/MP3 CD player)
Load button
CD eject button
CD slot
Scan
Track up
button
button
Track down
button
Disc down
button
Fast-forward
button
Repeat button
Reverse button
Random button
Disc up button
There are two types of In-dash CD
changers. Check which In-dash CD
changer type you own.
Inserting the CD
The CD must be label-side up when
inserting. The auto-loading mechanism
will set the CD and begin play. There will
be a short lapse before play begins while
the player reads the digital signals on the
CD.
Type
Playable data
· Music data (CD-DA)
· Music data (CD-DA)
Music CD player
Music CD/MP3 CD
player
· MP3 file
The disc number and the track number
will be displayed.
NOTE
If a disc has both music data (CD-DA)
and MP3 files, playback of the two file
types differs depending on how the disc
was recorded.
6-30
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page211
Tuesday, May 9 2006 10:45 AM
Black plate (211,1)
Interior Comfort
Audio System
NOTE
NOTE
The CD will begin playback
automatically after insertion.
The first-inserted CD will be played
automatically when:
A CD cannot be inserted while the
display reads “WAIT”. A beeping
sound can be heard during this waiting
time. Simultaneously pressing the
power/volume dial and the load button
l
No other CD is inserted within 15
seconds after “IN” is displayed.
l
The CD trays are full.
(
) for about 2 seconds will turn
Ejecting the CD
Normal ejection
this beeping sound ON or OFF.
Normal insertion
1. Press the CD eject button ( ). The
disc number and “DISC OUT” will be
displayed.
1. Press the load button (
).
2. When “IN” is displayed, insert the CD.
2. Pull out the CD.
Inserting CDs into desired tray number
NOTE
1. Press and hold the load button (
)
for about 2 seconds until a beep sound
is heard.
l
When the CD is ejected during play,
the next CD will be played
automatically.
2. Press the channel preset button for the
desired tray number while “WAIT” is
displayed.
l
(Music CD player)
If the CD is not removed from the
slot within approximately 10 seconds
after ejection, it will be re- inserted
automatically.
3. When “IN” is displayed, insert the CD.
NOTE
The CD cannot be inserted to the
desired tray number if the number is
already occupied.
Ejecting CDs from desired tray number
1. Press and hold the CD eject button (
for about 2 seconds until a beep sound
is heard.
)
Multiple insertion
The “DISC OUT” display flashes.
1. Press and hold the load button (
)
2. Press the channel preset button for the
desired CD number for less than 5
seconds after the beep sound is heard.
for about 2 seconds until a beep sound
is heard.
2. When “IN” is displayed, insert the CD.
3. Pull out the CD.
3. When “IN” is displayed again, insert
the next CD.
6-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page212
Tuesday, May 9 2006 10:45 AM
Black plate (212,1)
Interior Comfort
Audio System
NOTE
NOTE
l
(Music CD player)
CDs will be ejected starting with the
one with the lowest number.
If the CD is not removed from the slot
within approximately 10 seconds after
ejection, it will be re- inserted
automatically.
l
l
All CDs in the tray will be ejected
continuously.
CDs can be ejected when the ignition
switch is off. Press and hold the CD
eject button ( ) for about 2 seconds
and all CDs will eject.
Multiple ejection
1. Press and hold the CD eject button (
for about 2 seconds until a beep sound
is heard.
)
l
(Music CD player)
If the CD is not removed from the
slot within approximately 10 seconds
after ejection, it will be re- inserted
automatically.
The “DISC OUT” display flashes.
2. Press the CD eject button ( ) again
for less than 5 seconds after the beep
sound is heard.
Playing
NOTE
Press the CD play button ( ) to start
play when a CD is in the unit.
If there isn't a CD in the unit when the CD
play button ( ) is pressed, “NO DISC”
will flash on and off.
If the button is not pressed and about 5
seconds have elapsed while
“DISC OUT” is flashing, CDs are
automatically ejected.
Fast-forward/Reverse
3. Pull out the CD, then the next CD will
be ejected.
Press and hold the fast-forward button
(
) to advance through a track at high
speed.
Press and hold the reverse button (
)
to reverse through a track at high speed.
Track search
Press the track up button ( ) once to
skip forward to the beginning of the next
track.
Press the track down button ( ) once to
skip back to the beginning of the current
track.
Disc search
During music CD playback
To change the disc, press the DISC button
(
or
) during playback.
6-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page213
Tuesday, May 9 2006 10:45 AM
Black plate (213,1)
Interior Comfort
Audio System
During MP3 CD playback
During MP3 CD playback
To change the disc, press the DISC button
(Track repeat)
(
or
) for 1.5 seconds or
1. Press the repeat button (
) during
more during playback.
playback to play the current track
repeatedly. “RPT” is displayed.
Folder search (during MP3 CD
playback)
2. To cancel the repeat play, press the
button again after 3 seconds.
To change to the previous folder, press the
folder down button (
1.5 seconds, or press the folder up button
) for less than 1.5 seconds to
) for less than
(Folder repeat)
(
1. Press the repeat button (
) during
advance to the next folder.
playback, and then press the button
again within 3 seconds to play the
tracks in the current folder repeatedly.
“RPT” is displayed.
Music scan
This feature helps to find a program by
playing about the first 10 seconds of each
track.
2. Press the button again to cancel the
repeat play.
Press the scan button (
) during play
Random play
to start scan play operation (the track
number will flash).
Tracks are randomly selected and played.
Press the scan button (
to cancel scan play.
) once again
During music CD playback
1. Press the random button (
) during
playback to play the tracks in the CD
randomly. “RDM” is displayed.
NOTE
If the unit is left in scan, normal play
will resume where scan was selected.
2. Press the button again to cancel the
random play.
During MP3 CD playback
(Folder random)
Repeat play
During music CD playback
1. Press the random button (
) during
1. Press the repeat button (
) during
playback to play the tracks in the folder
randomly. “RDM” is displayed.
playback to play the current track
repeatedly. “RPT” is displayed.
2. To cancel the random play, press the
button again after 3 seconds.
2. Press the button again to cancel the
repeat play.
6-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page214
Tuesday, May 9 2006 10:45 AM
Black plate (214,1)
Interior Comfort
Audio System
(CD random)
MP3 CD
1. Press the random button (
playback, and then press the button
again within 3 seconds to play the
tracks in the CD randomly. “RDM” is
displayed.
) during
Disc number/File
number/Elapsed time
2. Press the button again to cancel the
random play.
Disc tray number
Folder number/Track
number
Switching the display (Music CD/MP3
CD player)
Track name
Folder name
Each time the display button (
) is
pressed during playback, the display will
switch in the following order.
Music CD
Album name (ID3 Tag)
Song name (ID3 Tag)
Artist name (ID3 Tag)
Track number/Elapsed
time display
Disc tray number
File name display
Album name display
NOTE
(MP3 CD)
Artist name display
l
“NO TITLE” will be displayed when
the display is switched for a file
without a file, track or other name
input.
l
This unit can only read English
(including numerals) one-byte
characters. If any other character is
included, “NO TITLE” will be
displayed. Depending on the CD
writing software used, proper display
may not be possible.
6-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page215
Tuesday, May 9 2006 10:45 AM
Black plate (215,1)
Interior Comfort
Audio System
Display scroll (Music CD/MP3 CD
player)
Only 12 characters can be displayed at
one time. To display the rest of the
characters of a long title, turn the display
feed dial (
) to the right. Hidden
titles can be scrolled into the display one
character at a time.
NOTE
The displayable number of characters is
limited. If the number of characters,
including the file extension (.mp3),
exceeds 32 characters, it may not be
fully displayed.
Message display
If “CHECK CD” is displayed, it means
that there is some CD malfunction. Check
for damage, dirt, or smudges on the CD,
and then properly reinsert. If the message
appears again, take the unit to an
Authorized Mazda Dealer for service.
6-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page216
Tuesday, May 9 2006 10:45 AM
Black plate (216,1)
Interior Comfort
Audio System
qError Indications
If you see an error indication on the display, find the cause in the chart. If you cannot clear
the error indication, take the vehicle to an Authorized Mazda Dealer.
Indication
Cause
Solution
Insert the CD properly. If the error indication
does not disappear, consult an Authorized Mazda
Dealer
CD is inserted upside down
CHECK CD
Insert another CD properly. If the error indication
does not disappear, consult an Authorized Mazda
Dealer
CD is defective
6-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page217
Tuesday, May 9 2006 10:45 AM
Black plate (217,1)
Interior Comfort
Audio System
qAdjusting the Volume
Audio Control Switch
Operation (Steering Wheel)
To increase the volume, press the volume
button ( ).
When the audio unit is turned on,
operation of the audio unit from the
steering wheel is possible.
To decrease the volume, press the volume
button ( ).
NOTE
Because the audio unit will be turned
off under the following conditions, the
switches will be inoperable.
l
When the ignition switch is turned to
the LOCK position.
l
When the power button on the audio
unit is pressed and the audio unit is
turned off.
l
When all CDs are ejected.
qChanging the Source
Press the mode switch (
) to change
the audio source (FM1 radio> FM2 radio>
AM radio> CD changer> Cassette tape
player> SIRIUS1> SIRIUS2> SIRIUS3>
cyclical).
NOTE
Mazda has installed this system to
prevent distraction while driving the
vehicle and using audio controls on the
dashboard.
Always make safe driving your first
priority.
6-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page218
Tuesday, May 9 2006 10:45 AM
Black plate (218,1)
Interior Comfort
Audio System
When playing a CD
NOTE
Press the seek switch ( ) to skip to the
next track.
Press the seek switch ( ) to repeat the
current track.
Cassette tape, CD changer, and SIRIUS
digital satellite radio modes cannot be
selected in the following cases:
l
A cassette deck, CD changer, or
qMute Switch
SIRIUS digital satellite radio unit is
not equipped on the audio system.
Press the mute switch ( ) once to mute
audio, press it again to resume audio
output.
l
A cassette tape, or CD has not been
inserted.
NOTE
qSeek Switch
If the ignition switch is turned to the
LOCK position with the audio muted,
the mute will be canceled.
Therefore, when the engine is restarted,
the audio is not muted. To mute the
audio again, press the mute switch ( ).
When listening to the radio
Press the seek switch (
,
), the radio
switches to the next/previous stored
station in the order that it was stored
(1―6).
Press the seek switch (
,
) for about 2
seconds until a beep sound is heard to
seek all usable stations at a higher or
lower frequency whether programmed or
not.
When playing a cassette tape
Press the seek switch ( ), release, and it
will advance to the next selection.
Press the seek switch ( ), release, and it
will repeat the selection being played.
6-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page219
Tuesday, May 9 2006 10:45 AM
Black plate (219,1)
Interior Comfort
Audio System
Safety Certification
This CD player is made and tested to meet exacting safety standards. It meets FCC
requirements and complies with safety performance standards of the U.S. Department of
Health and Human Services.
CAUTION
l
This CD player should not be adjusted or repaired by anyone except qualified service
personnel.
If servicing is required, contact an Authorized Mazda Dealer.
l
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous laser exposure. Never operate the CD player
with the top case of the unit removed.
l
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
NOTE
For CD player section:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
6-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page220
Tuesday, May 9 2006 10:45 AM
Black plate (220,1)
Interior Comfort
Interior Equipment
Sunvisors
Interior Lights
When you need a sunvisor, lower it for
use in front or swing it to the side.
qIlluminated Entry System
When the illuminated entry system
operates, the overhead light (switch is in
the DOOR position) and the courtesy
lights turn on for:
Sunvisor
l
About 30 seconds after the driver's
door is unlocked and the ignition
switch is in the LOCK position (with
the ignition key removed).
l
About 15 seconds after all doors are
closed (If your vehicle is equipped with
the advanced key, the overhead light
turns on for about 5 seconds when the
advanced key is outside of the vehicle).
qVanity Mirrors
l
About 15 seconds after the ignition
To use the vanity mirror, lower the
sunvisor.
The vanity mirror light will illuminate
when you open the cover.
switch is in the LOCK position (with
the ignition key removed) with all
doors closed.
The light also turns off when:
l
The ignition switch is turned to the ON
position and all doors are closed.
l
The driver's door is locked.
NOTE
Battery saver
If any door is left opened, the light goes
out after about 30 minutes to save the
battery.
The light turns on again when the
ignition switch is turned to the ON
position, or when any door is opened
after all doors have been closed.
6-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page221
Tuesday, May 9 2006 10:45 AM
Black plate (221,1)
Interior Comfort
Interior Equipment
qOverhead Lights
qMap Lights
Front
The map lights are switched on or off by
pressing the switches.
Front
Switch
Front Overhead Lights
Position
Light off
Rear
l
Light on when any door is open
l
Light on or off when the
illuminated entry system is on
Rear
Switch
Rear Overhead Lights
Position
Light off
l
Light on when any door is open
l
Light on or off when the
illuminated entry system is on
6-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page222
Tuesday, May 9 2006 10:45 AM
Black plate (222,1)
Interior Comfort
Interior Equipment
qCourtesy Lights
Turns on when any door is open or the
illuminated entry system is on.
Courtesy light
6-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page223
Tuesday, May 9 2006 10:45 AM
Black plate (223,1)
Interior Comfort
Interior Equipment
Information Display
OPEN/CLOSE switch (with navigation system)
AMB switch (with outside temperature display )
TILT switch (with navigation system)
CLOCK/CLK switch
SET switch
qInformation Display Functions
The information display has the following functions:
l
Clock
l
Ambient Temperature Display (Outside Temperature Display)
l
Climate Control Display
l
Audio Display
6-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page224
Tuesday, May 9 2006 10:45 AM
Black plate (224,1)
Interior Comfort
Interior Equipment
Time resetting
qClock
While the clock is displayed, press the
SET switch 1.5 seconds or more. When
the switch is released, a beep will sound
and the clock will be reset as follows:
(Example)
When the ignition switch is in the ACC or
ON position, the time is displayed.
12:01―12:29→12:00
12:30―12:59→1:00
NOTE
When the SET switch is released, the
seconds are reset to “00”.
qAmbient Temperature Display
Time setting
When the ignition switch is in the ON
position, press the AMB switch to display
the ambient temperature.
1. Press the CLOCK/CLK switch until a
beep sounds, and “12Hr” and “24Hr”
will be displayed.
2. Press the SET switch to switch between
“12Hr” and “24Hr” displays. The
selected display will flash.
To select the desired clock setting,
press the CLOCK/CLK switch again
while the preferred setting is flashing.
3. “Hr. ADJUST” will be displayed next,
and the hour portion of the display will
flash. Press the SET switch to set the
hour, then press the CLOCK/CLK
switch.
4. “Min. ADJUST” will be displayed
next, and the minutes portion of the
display will flash. Press the SET switch
to set the minutes, then press the
CLOCK/CLK switch.
6-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page225
Tuesday, May 9 2006 10:45 AM
Black plate (225,1)
Interior Comfort
Interior Equipment
NOTE
Lighter
l
Under the following conditions, the
The ignition switch must be in the ACC
or ON position.
ambient temperature display may
differ from the actual ambient
temperature depending on the
surroundings and vehicle conditions:
1. Open the cover.
l
Significantly cold or hot
temperatures.
Sudden changes in ambient
l
temperature.
The vehicle is parked.
The vehicle is driven at low
l
l
speeds.
l
Press the AMB switch 2 seconds or
more to switch the display from
Fahrenheit to Centigrade or vice
versa.
2. Press the lighter in and release it. When
ready for use, it automatically pops out.
l
Press the AMB switch again to
switch the display from ambient
temperature to the temperature set
for the air conditioner.
qClimate Control Display
The climate control system status is
displayed. To operate the climate control
system, refer to “Climate Control System”
(page 6-2).
qAudio Display
The audio system status is displayed. To
operate the audio system, refer to
6-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page226
Tuesday, May 9 2006 10:45 AM
Black plate (226,1)
Interior Comfort
Interior Equipment
Ashtray
CAUTION
l
Don't touch the metal part of the
CAUTION
lighter, you may burn yourself.
Don't use the ashtray for trash. You
might start a fire.
l
Don't hold the lighter in because it
will overheat.
l
Don't use the lighter socket for plug-
qFront
in accessories such as shavers and
coffee pots. They may damage it or
cause electrical failure. Use only a
genuine Mazda lighter or the
equivalent.
To use, open the cover.
l
If the lighter doesn't pop out within
30 seconds, remove it to prevent
overheating.
To remove, open the cover and pull up the
ashtray.
6-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page227
Tuesday, May 9 2006 10:45 AM
Black plate (227,1)
Interior Comfort
Interior Equipment
qRear
Cup Holder
To remove, open the ashtray lid, grasp
both sides of the ashtray and pull it out.
WARNING
Never use a cup holder to hold hot
liquids while the vehicle is moving:
Using a cup holder to hold hot liquids
while the vehicle is moving is
dangerous. If the contents spill, you
could be scalded.
Do not put anything other than cups
or drink cans in cup holders:
Putting objects other than cups or
drink cans in a cup holder is
dangerous.
During sudden braking or
maneuvering, occupants could be hit
and injured, or objects could be
thrown around the vehicle, causing
interference with the driver and the
possibility of an accident. Only use a
cup holder for cups or drink cans.
CAUTION
To reduce the possibility of injury in an
accident or a sudden stop, keep cup
holders closed when not in use.
6-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page228
Tuesday, May 9 2006 10:45 AM
Black plate (228,1)
Interior Comfort
Interior Equipment
qFront
Bottle Holder
To use the cup holder, open the center
console by pressing the lower center part
of its cover.
Bottle holders are on the inside of the
front doors.
Bottle holder
qRear
CAUTION
The rear cup holder is on the rear center
armrest.
Do not use the bottle holders for
containers without caps. The contents
may spill when the door is opened or
closed.
6-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page229
Tuesday, May 9 2006 10:45 AM
Black plate (229,1)
Interior Comfort
Interior Equipment
qStorage Pocket
Storage Compartments
To open, push the release catch down and
pull the lid downward.
WARNING
Keep storage boxes closed when
driving:
Driving with the storage boxes open is
dangerous. To reduce the possibility of
injury in an accident or a sudden stop,
keep the storage boxes closed when
driving.
CAUTION
Do not leave lighters or eyeglasses in
the storage boxes while parked under
the sun. A lighter could explode or the
plastic material in eyeglasses could
deform and crack from high
qCenter Box with Lid (Without
Navigation System)
To use, pull the knob, and the lid opens
automatically.
temperature.
Knob
qOverhead Console
This console box is designed to store
eyeglasses or other accessories.
Push and release to open.
6-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page230
Tuesday, May 9 2006 10:45 AM
Black plate (230,1)
Interior Comfort
Interior Equipment
Small items can be placed in the tray of
the center console lid.
To open it, pull the upper release latch.
qGlove Box
To open the glove box, pull the latch
toward you.
Insert the master key (auxiliary key*) and
turn it clockwise to lock,
counterclockwise to unlock.
* Advanced key equipped vehicle
Unlock
Lock
qCenter Console
To open, pull the lower release latch.
6-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page231
Tuesday, May 9 2006 10:45 AM
Black plate (231,1)
Interior Comfort
Interior Equipment
NOTE
Accessory Sockets
To prevent discharging the battery, don't
use the socket for long periods with the
engine off or idling.
The ignition switch must be in the ACC
or ON position to prevent the battery from
discharging.
Only use genuine Mazda accessories or
the equivalent requiring no greater than
120 W (DC 12 V, 10 A).
When placing an electrical device (e.g.
cellular phone) in the tray which is
connected to the accessory socket, pass
the connection plug cord through the slot
in the cap.
Cap slot, closed
Cap slot, opened
CAUTION
To prevent accessory socket damage or
electrical failure, pay attention to the
following:
1. Open the lid by pulling the upper
release catch.
2. Remove the tray mat.
l
Don't use accessories that require
more than 120 W (DC 12 V, 10 A).
3. Using a coin, turn the cap
counterclockwise (about 45° from the
closed position) and remove it.
l
Don't use accessories that are not
genuine Mazda accessories or the
equivalent.
NOTE
l
Close the cover when the accessory
socket is not in use to prevent
foreign objects and liquids from
getting into the accessory socket.
Do NOT discard the cap.
l
Correctly insert the plug into the
accessory socket.
6-51
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page232
Tuesday, May 9 2006 10:45 AM
Black plate (232,1)
Interior Comfort
Interior Equipment
6. Make sure the connection plug cord is
running through the cap slot; reinstall
the cap and turn it clockwise (about
45° to the opened position).
Plug cord
4. Open the tray by pulling the lower
release catch.
5. Pass the connection plug cord through
the hole of the tray and insert the plug
in the socket.
7. Pass the connection plug cord through
the slit in the tray mat and then set the
tray mat in place.
Plug
6-52
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page233
Tuesday, May 9 2006 10:45 AM
Black plate (233,1)
In Case of an Emergency
7
Helpful information on what to do in an emergency.
Flat Tire ......................................................................................... 7-3
7-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page234
Tuesday, May 9 2006 10:45 AM
Black plate (234,1)
In Case of an Emergency
Parking in an Emergency
Parking in an Emergency
The hazard warning lights should always
be used when you stop on or near a
roadway in an emergency.
The hazard warning lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.
Depress the hazard warning flasher and all
the turn signals will flash.
NOTE
l
The turn signals don't work when the
hazard warning lights are on.
l
Check local regulations about the use
of hazard warning lights while the
vehicle is being towed. They may
forbid it.
7-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page235
Tuesday, May 9 2006 10:45 AM
Black plate (235,1)
In Case of an Emergency
Flat Tire
Spare Tire and Tool Storage
Spare tire and tools are stored in the locations illustrated in the diagram.
Spare tire
Tool bag
Jack
Jack lever
Tiedown eyelet
Lug wrench
7-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page236
Tuesday, May 9 2006 10:45 AM
Black plate (236,1)
In Case of an Emergency
Flat Tire
qJack
WARNING
To remove the jack
1. Open the trunk mat.
Do not install the temporary spare tire
on the front wheels (driving wheels):
Driving with the temporary spare tire
on one of the front driving wheels is
dangerous. Handling will be affected.
You could lose control of the vehicle,
especially on ice or snow bound roads,
and have an accident. Move a regular
tire to the front wheel and install the
temporary spare tire to the rear.
CAUTION
2. Turn the wing bolt counterclockwise.
l
When using the temporary spare tire,
driving stability may decrease
compared to when using only the
conventional tire. Drive carefully.
l
To avoid damage to the temporary
spare tire or to the vehicle, observe
the following precautions:
l
Do not exceed 80 km/h (50 mph).
Avoid driving over obstacles.
l
Also, do not drive through an
automatic car wash. This tire's
diameter is smaller than a
conventional tire, so the ground
clearance is reduced about 7 mm
(0.3 in).
Do not use tire chains on any type
of tire, including the spare tire.
Do not use your temporary spare
tire on any other vehicle, it has
been designed only for your
Mazda.
Use only one temporary spare tire
on your vehicle at the same time.
To secure the jack
Perform the removal procedure in reverse.
l
qSpare Tire
l
Your Mazda has a temporary spare tire.
The temporary spare tire is lighter and
smaller than a conventional tire, and is
designed only for emergency use and
should be used only for VERY short
periods. Temporary spare tires should
NEVER be used for long drives or
extended periods.
l
7-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page237
Tuesday, May 9 2006 10:45 AM
Black plate (237,1)
In Case of an Emergency
Flat Tire
To remove the spare tire
Changing a Flat Tire
1. Remove the trunk mat.
NOTE
If the following occurs while driving, it
could indicate a flat tire.
l
Steering becomes difficult.
l
The vehicle begins to vibrate
excessively.
l
The vehicle pulls in one direction.
If you have a flat tire, drive slowly to a
level spot that is well off the road and out
of the way of traffic to change the tire.
Stopping in traffic or on the shoulder of a
busy road is dangerous.
2. Turn the tire wing bolt
counterclockwise.
Wing bolt
Tire clamp
WARNING
Be sure to follow the directions for
changing a tire, and never get under a
vehicle that is supported only by a
jack:
Changing a tire is dangerous if not
done properly. The vehicle can slip off
the jack and seriously injure someone.
To secure the spare tire
Never allow anyone inside a vehicle
supported by a jack:
Perform the removal procedure in reverse.
Allowing someone to remain in a
vehicle supported by a jack is
dangerous. The occupant could cause
the vehicle to fall resulting in serious
injury.
NOTE
Make sure the jack is well lubricated
before using it.
7-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page238
Tuesday, May 9 2006 10:45 AM
Black plate (238,1)
In Case of an Emergency
Flat Tire
1. Park on a level surface off the right-of-
way and firmly set the parking brake.
qRemoving a Flat Tire
1. Loosen the lug nuts by turning them
counterclockwise one turn each, but
don't remove any lug nuts until the tire
has been raised off the ground.
2. Shift into Reverse (R) or 1 and turn off
the engine.
3. Turn on the hazard warning flasher.
4. Have everyone get out of the vehicle
and away from the vehicle and traffic.
5. Remove the jack, tool bag, and spare
tire (page 7-3).
6. Block the wheel diagonally opposite
the flat tire. When blocking a wheel,
place a tire block both in front and
behind the tire.
2. Place the jack under the jacking
position closest to the tire being
changed.
NOTE
Jacking position
When blocking a tire, use rocks or
wood blocks of sufficient size to hold
the tire in place.
7-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page239
Tuesday, May 9 2006 10:45 AM
Black plate (239,1)
In Case of an Emergency
Flat Tire
4. Turn the lug wrench clockwise and
raise the vehicle high enough so that
the spare tire can be installed. Before
removing the lug nuts, make sure your
Mazda is firmly in position and that it
cannot slip or move.
WARNING
Use only the front and rear jacking
positions recommended in this
manual:
Attempting to jack the vehicle in
positions other than those
recommended in this manual is
dangerous. The vehicle could slip off
the jack and seriously injure or even
kill someone. Use only the front and
rear jacking positions recommended
in this manual.
Use only the jack provided with your
Mazda:
Using a jack that is not designed for
your Mazda is dangerous. The vehicle
could slip off the jack and seriously
injure someone.
5. Remove the lug nuts by turning them
counterclockwise; then remove the
wheel.
Never place objects under the jack:
Jacking the vehicle with an object
under the jack is dangerous. The jack
could slip and someone could be
seriously injured by the jack or the
falling vehicle.
3. Insert the jack lever and attach the lug
wrench to tire jack.
7-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page240
Tuesday, May 9 2006 10:45 AM
Black plate (240,1)
In Case of an Emergency
Flat Tire
qLocking Lug Nutsí
To install the nut
1. Place the key on top of the nut, and be
sure to hold the key square to it. If you
hold the key at an angle, you may
damage both key and nut. Don't use a
power impact wrench.
If your vehicle has optional antitheft
wheel lug nuts, one on each wheel will
lock the tires and you must use a special
key to unlock them. This key is attached
to the lug wrench and is stored with the
spare tire. Register them with the lock
manufacturer by filling out the card
provided in the glove box and mailing it
in the accompanying envelope. If you lose
this key, consult an Authorized Mazda
Dealer or use the lock manufacturer's
order form, which is with the registration
card.
2. Place the lug wrench on top of the key,
apply pressure, and turn it clockwise.
qMounting the Spare Tire
1. Remove dirt and grime from the
mounting surfaces of the wheel and
hub, including the hub bolts, with a
cloth.
Antitheft lug nut
Special key
To remove an antitheft lug nut
1. Obtain the key for the antitheft lug nut.
WARNING
2. Place the key on top of the nut, and be
sure to hold the key square to it. If you
hold the key at an angle, you may
damage both key and nut. Don't use a
power impact wrench.
Make sure the mounting surfaces of
the wheel, hub and lug nuts are clean
before changing or replacing tires:
When changing or replacing a tire,
not removing dirt and grime from the
mounting surfaces of the wheel, hub
and hub bolts is dangerous. The lug
nuts could loosen while driving and
cause the tire to come off, resulting in
an accident.
3. Place the lug wrench on top of the key
and apply pressure. Turn the wrench
counterclockwise.
2. Mount the spare tire.
7-8
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page241
Tuesday, May 9 2006 10:45 AM
Black plate (241,1)
In Case of an Emergency
Flat Tire
3. Install the lug nuts with the beveled
edge inward; tighten them by hand.
4. Turn the lug wrench counterclockwise
and lower the vehicle. Use the lug
wrench to tighten the nuts in the order
shown.
WARNING
If you're unsure of how tight the nuts
should be, have them inspected at an
Authorized Mazda Dealer.
Do not apply oil or grease to lug nuts
and bolts and do not tighten the lug
nuts beyond the recommended
tightening torque:
Nut tightening torque
N·m (kgf·m, ft·lbf)
88―118 (9―12, 65―87)
Applying oil or grease to lug nuts and
bolts is dangerous. The lug nuts could
loosen while driving and cause the tire
to come off, resulting in an accident.
In addition, lug nuts and bolts could
be damaged if tightened more than
necessary.
WARNING
Always securely and correctly tighten
the lug nuts:
Improperly or loosely tightened lug
nuts are dangerous. The wheel could
wobble or come off. This could result
in loss of vehicle control and cause a
serious accident.
Be sure to reinstall the same nuts you
removed or replace them with metric
nuts of the same configuration:
Because the wheel studs and lug nuts
on your Mazda have metric threads,
using a non-metric nut is dangerous.
On a metric stud, it would not secure
the wheel and would damage the stud,
which could cause the wheel to slip off
and cause an accident.
7-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page242
Tuesday, May 9 2006 10:45 AM
Black plate (242,1)
In Case of an Emergency
Flat Tire
5. Remove the center cap by tapping it
with the lug wrench.
6. Store the damaged tire, using the wing
bolt to hold it in place.
Tire clamp
Wing bolt
7. Check the inflation pressure. Refer to
the specification charts on page 10-6.
8. Have the flat tire repaired or replaced
as soon as possible.
WARNING
Do not drive with any tires that have
incorrect air pressure:
Driving on tires with incorrect air
pressure is dangerous. Tires with
incorrect pressure could affect
handling and result in an accident.
When you check the regular tires' air
pressure, check the spare tire, too.
NOTE
To prevent the jack and tool from
rattling, store them properly.
7-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page243
Tuesday, May 9 2006 10:45 AM
Black plate (243,1)
In Case of an Emergency
Overheating
NOTE
Overheating
Once the engine coolant exceeds a
preset temperature, an electrical cooling
fan turns on. It will continue running
for about 10 minutes after the ignition
switch is turned to off.
If the temperature gauge indicates
overheating, the vehicle loses power, or
you hear a loud knocking or pinging
noise, the engine is probably too hot.
WARNING
If the temperature gauge indicates
overheating:
1. Drive safely to the side of the road and
park off the right-of-way.
Turn off the ignition switch and
make sure the fan is not running
before attempting to work near the
electrical cooling fan:
Working near the electrical cooling
fan when it is running is dangerous.
You could be hit by the fan and
seriously injured.
2. Shift into neutral.
3. Apply the parking brake.
4. Turn off the air conditioner.
5. Check whether coolant or steam is
escaping from under the hood or from
the engine compartment.
If steam is coming from the engine
compartment:
Don't go near the front of the vehicle.
Do not remove either
cooling system caps when the engine
and radiator are hot:
Stop the engine.
When the engine and radiator are hot,
scalding coolant and steam may shoot
out under pressure and cause serious
injury.
Wait until the steam dissipates, then
open the hood and start the engine.
If neither coolant nor steam is
escaping:
Open the hood and idle the engine until
it cools.
Open the hood ONLY after steam is no
longer escaping from the engine:
Steam from an overheated engine is
dangerous. The escaping steam could
seriously burn you.
CAUTION
If the cooling fan does not operate
while the engine is running, the engine
temperature will increase. Stop the
engine and call an Authorized Mazda
Dealer.
7-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page244
Tuesday, May 9 2006 10:45 AM
Black plate (244,1)
In Case of an Emergency
Overheating
6. Make sure the cooling fan is operating,
then turn off the engine after the
temperature has decreased.
7. When cool, check the coolant level.
If it's low, look for coolant leaks from
the radiator and hoses.
If you find a leak or other damage, or if
coolant is still leaking:
Stop the engine and call an Authorized
Mazda Dealer.
Cooling system cap
Coolant reservoir
If you find no problems, the engine is
cool, and no leaks are obvious:
Carefully add coolant as required (page
CAUTION
If the engine continues to overheat or
frequently overheats, have the cooling
system inspected. The engine could be
seriously damaged unless repairs are
made. Consult an Authorized Mazda
Dealer.
7-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page245
Tuesday, May 9 2006 10:45 AM
Black plate (245,1)
In Case of an Emergency
Emergency Starting
Starting a Flooded Engine
If the engine fails to start, it may be
flooded (excessive fuel in the engine).
Follow this procedure:
1. Depress the accelerator all the way and
hold it there.
2. Turn the ignition switch to the START
position and hold it there―for up to 10
seconds. If the engine starts, release the
key and accelerator immediately
because the engine will suddenly rev
up.
3. If the engine fails to start, crank it
without depressing the accelerator―for
up to 10 seconds.
7-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page246
Tuesday, May 9 2006 10:45 AM
Black plate (246,1)
In Case of an Emergency
Emergency Starting
Jump-Starting
Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If you
feel unsure about jump-starting, we strongly recommend that you have a competent service
technician do the work.
WARNING
Follow These Precautions Carefully:
To ensure safe and correct handling of the battery, read the following precautions
carefully before using the battery or inspecting it.
Always wear eye protection when working near the battery:
Working without eye protection is dangerous. Battery fluid contains SULFURIC
ACID which could cause blindness if splashed into your eyes. Also, hydrogen gas
produced during normal battery operation, could ignite and cause the battery to
explode.
Wear eye protection and protective gloves to prevent contact with battery fluid:
Spilled battery fluid is dangerous.
Battery fluid contains SULFURIC ACID which could cause serious injuries if it gets
in eyes, skin or clothing. If this happens, immediately flush your eyes with water for
15 minutes or wash your skin thoroughly and get medical attention.
Always keep batteries out of the reach of children:
Allowing children to play near batteries is dangerous. Battery fluid could cause
serious injuries if it gets in the eyes or on the skin.
Do not allow the positive ( ) terminal to contact any other metal object that
could cause sparks:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries. When working near a battery,
do not allow metal tools to contact the positive ( ) or negative ( ) terminal of the
battery.
7-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page247
Tuesday, May 9 2006 10:45 AM
Black plate (247,1)
In Case of an Emergency
Emergency Starting
WARNING
Keep all flames, including cigarettes, and sparks away from open battery cells:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries.
Do not jump-start a frozen battery or one with a low fluid level:
Jump-starting a frozen battery or one with a low fluid level is dangerous. It may
rupture or explode, causing serious injury.
Connect the negative cable to a good ground point away from the battery:
Connecting the end of the second jumper cable to the negative ( ) terminal of the
discharged battery is dangerous.
A spark could cause the gas around the battery to explode and injure someone.
Route the jumper cables away from parts that will be moving:
Connecting a jumper cable near or to moving parts (cooling fans, belts) is dangerous.
The cable could get caught when the engine starts and cause serious injury.
CAUTION
Use only a 12 V booster system. You can damage a 12 V starter, ignition system, and
other electrical parts beyond repair with a 24 V power supply (two 12 V batteries in
series or a 24 V motor generator set).
7-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page248
Tuesday, May 9 2006 10:45 AM
Black plate (248,1)
In Case of an Emergency
Emergency Starting
Connect cables in numerical order and disconnect in reverse order.
Jumper cables
Booster battery
Discharged
battery
1. Make sure the booster battery is 12 V
4. Start the engine of the booster vehicle
and run it a few minutes. Then start the
engine of the other vehicle.
and that its negative terminal is
grounded.
2. If the booster battery is in another
vehicle, don't allow both vehicles to
touch. Turn off the engine of the
vehicle with the booster battery and all
unnecessary electrical loads in both
vehicles.
5. When finished, carefully disconnect the
cables in the reverse order described in
the illustration.
3. Connect the jumper cables in the exact
sequence as in the illustration.
l
Connect one end of a cable to the
positive terminal on the discharged
battery (1).
l
Attach the other end to the positive
terminal on the booster battery (2).
l
Connect one end of the other cable
to the negative terminal of the
booster battery (3).
l
Connect the other end to a solid,
stationary, exposed metallic point
(for example, the strut mounting
bolt) away from the discharged
battery (4).
7-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page249
Tuesday, May 9 2006 10:45 AM
Black plate (249,1)
In Case of an Emergency
Emergency Starting
Push-Starting
Do not push-start your Mazda.
WARNING
Never tow a vehicle to start it:
Towing a vehicle to start it is
dangerous. The vehicle being towed
could surge forward when its engine
starts, causing the two vehicles to
collide. The occupants could be
injured.
CAUTION
Do not push-start a vehicle that has a
manual transaxle. It can damage the
emission control system.
7-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page250
Tuesday, May 9 2006 10:45 AM
Black plate (250,1)
In Case of an Emergency
Emergency Towing
Towing Description
CAUTION
We recommend that towing be done only
by an Authorized Mazda Dealer or a
commercial tow-truck service.
Don't tow the vehicle pointed backward
with driving wheels on the ground. This
may cause internal damage to the
transaxle.
Proper lifting and towing are necessary to
prevent damage to the vehicle.
Particularly when towing a AWD vehicle,
where all the wheels are connected to the
drive train, proper transporting of the
vehicle is absolutely essential to avoid
damaging the drive system. Government
and local laws must be followed.
Wheel dollies
CAUTION
Don't tow with sling-type equipment.
This could damage your vehicle. Use
wheel-lift or flatbed equipment.
A towed AWD vehicle must have all its
wheels off the ground.
7-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page251
Tuesday, May 9 2006 10:45 AM
Black plate (251,1)
In Case of an Emergency
Emergency Towing
Tiedown Hooks
CAUTION
WARNING
Always tow a AWD vehicle with all
four wheels off the ground:
Don't use the tiedown hooks under the
front and rear for towing.
They are designed ONLY for tying
down the vehicle when it's being
transported. Using them for towing will
damage the bumper.
Towing a AWD vehicle with either the
front or rear wheels on the ground is
dangerous as the drive train could be
damaged, or the vehicle could trail
away from the tow truck and cause an
accident. If the drive train has been
damaged, transport the vehicle on a
flat bed truck.
qTiedown Hooks
1. Remove the tiedown eyelet, lug
wrench, and jack lever from the trunk
(page 7-3).
2. Wrap the jack lever with a soft cloth to
prevent damage to the bumper and
open the cap located on the front and
rear bumper.
Front
7-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page252
Tuesday, May 9 2006 10:45 AM
Black plate (252,1)
In Case of an Emergency
Emergency Towing
Rear
Rear
Lug wrench
4. Hook the tying rope to the tiedown
eyelet.
CAUTION
The cap cannot be completely removed.
Do not use excessive force as it may
damage the cap or scratch the painted
bumper surface.
Front
3. Securely install the tiedown eyelet
using the lug wrench.
Front
Rear
Lug wrench
7-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page253
Tuesday, May 9 2006 10:45 AM
Black plate (253,1)
In Case of an Emergency
Emergency Towing
Recreational Towing
CAUTION
An example of “recreational towing” is
towing your vehicle behind a motorhome.
The transaxle is not designed for towing
this vehicle on all 4 wheels.
When doing recreational towing refer to
carefully follow the instructions.
If the tiedown eyelet is not securely
tightened, it may loosen or disengage
from the bumper when tying down the
vehicle. Make sure that the tiedown
eyelet is securely tightened to the
bumper.
7-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page254
Tuesday, May 9 2006 10:45 AM
Black plate (254,1)
7-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page256
Tuesday, May 9 2006 10:45 AM
Black plate (256,1)
Maintenance and Care
Introduction
Introduction
Be extremely careful and prevent injury to yourself and others or damage to your vehicle
when using this manual for inspection and maintenance.
If you're unsure about any procedure it describes, we strongly urge you to have a reliable
and qualified service shop perform the work, preferably an Authorized Mazda Dealer.
Factory-trained Mazda technicians and genuine Mazda parts are best for your vehicle.
Without this expertise and the parts that have been designed and made especially for your
Mazda, inadequate, incomplete, and insufficient servicing may result in problems. This
could lead to vehicle damage or an accident and injuries.
For expert advice and quality service, consult an Authorized Mazda Dealer.
The owner should retain evidence that proper maintenance has been performed as
prescribed.
Claims against the warranty resulting from lack of maintenance, as opposed to defective
materials or authorized Mazda workmanship, will not be honored.
Any auto repair shop using parts equivalent to your Mazda's original equipment may
perform maintenance. But we recommend that it always be done by an Authorized
Mazda Dealer using genuine Mazda parts.
8-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page257
Tuesday, May 9 2006 10:45 AM
Black plate (257,1)
Maintenance and Care
Scheduled Maintenance
Scheduled Maintenance
Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions
apply.
If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2).
l
Repeated short-distance driving
l
Driving in dusty conditions
l
Driving with extended use of brakes
l
Driving in areas where salt or other corrosive materials are being used
l
Driving on rough or muddy roads
l
Extended periods of idling or low-speed operation
l
Driving for long periods in cold temperatures or extremely humid climates
NOTE
After the prescribed period, continue to follow the described maintenance at the
recommended intervals.
8-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page258
Tuesday, May 9 2006 10:45 AM
Black plate (258,1)
Maintenance and Care
Scheduled Maintenance
qSchedule 1
Number of months or kilometers (miles), whichever comes first
Months
×1000 km
×1000 miles
6
12
24
15
18
36
24
48
30
30
60
36
72
45
42
84
48
96
60
Maintenance Interval
12
7.5
22.5
37.5
52.5
ENGINE
Audible inspect every 120,000 km (75,000 miles), if noisy,
adjust
Engine valve clearance
Drive belts (tension)
Engine oil
I
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Engine oil filter
COOLING SYSTEM
Cooling system
I
I
Replace at first 192,000 km (120,000 miles) or 10 years ; after
that, every 96,000 km (60,000 miles) or 5 years
FL22 type *1
Others
Engine coolant
Replace at first 96,000 km (60,000 miles) or 4 years ; after that,
every 2 years
FUEL SYSTEM
Air filter
R
Fuel lines and hoses *2
Hoses and tubes for emission *2
IGNITION SYSTEM
Spark plugs
I
I
I
Replace every 120,000 km (75,000 miles)
I
CHASSIS and BODY
Brake lines, hoses and connections
Disc brakes
I
I
I
I
I
Tire (Rotation)
Rotate every 12,000 km (7,500 miles)
I
Steering operation and linkages
I
I
Front and rear suspension and ball joints, and
wheel bearing axial play
I
*3*4
*4
Rear differential oil
Transfer oil
Driveshaft dust boots
Bolts and nuts on chassis and body
Exhaust system and heat shields
All locks and hinges
I
I
T
T
Inspect every 72,000 km (45,000 miles) or 5 years
L
L
L
L
L
L
L
L
8-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page259
Tuesday, May 9 2006 10:45 AM
Black plate (259,1)
Maintenance and Care
Scheduled Maintenance
Number of months or kilometers (miles), whichever comes first
Months
6
12
24
15
18
36
24
48
30
30
60
36
72
45
42
84
48
96
60
Maintenance Interval
×1000 km
12
7.5
×1000 miles
22.5
37.5
52.5
AIR CONDITIONER SYSTEM (if equipped)
Cabin air filter
Replace every 40,000 km (25,000 miles) or 2 years
Chart symbols:
I: Inspect and repair, clean, adjust, or replace if necessary.
R: Replace
L: Lubricate
T: Tighten
Remarks:
*1 Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding
area. Use FL22 when replacing the coolant.
*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed at
the recommended time or mileage/kilometer period to ensure long-term reliability.
*3 If the vehicle is operated primarily under any of the following conditions, replace the rear differential oil every
45,000 km (28,100 miles).
a) Driving in dusty, sandy or wet condition
b) Extended periods of idling or low speed operation
c) Repeated short trips of less than 16 km (10 miles)
*4 If this component has been submerged in water, the oil should be replaced.
8-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page260
Tuesday, May 9 2006 10:45 AM
Black plate (260,1)
Maintenance and Care
Scheduled Maintenance
qSchedule 2
Number of months or kilometers (miles), whichever comes first
Months
×1000 km
×1000 miles
4
8
5
8
12 16 20 24 28 32 36 40 44 48
Maintenance Interval
16 24 32 40 48 56 64 72 80 88 96
10 15 20 25 30 35 40 45 50 55 60
ENGINE
Audible inspect every 120,000 km (75,000 miles), if noisy,
adjust
Engine valve clearance
Drive belts (tension)
I
Puerto Rico
Others
Replace every 5,000 km (3,000 miles) or 3 months
Engine oil
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Engine oil filter
COOLING SYSTEM
Cooling system
I
I
Replace at first 192,000 km (120,000 miles) or 10 years ; after
that, every 96,000 km (60,000 miles) or 5 years
FL22 type *1
Others
Engine coolant
Replace at first 96,000 km (60,000 miles) or 4 years ; after that,
every 2 years
Engine coolant level
I
I
I
I
I
I
I
I
I
I
I
I
FUEL SYSTEM
Puerto Rico
Others
R
R
Air filter
R
Fuel lines and hoses *2
Hoses and tubes for emission *2
I
I
I
IGNITION SYSTEM
USA
Others *3
Replace every 96,000 km (60,000 miles)
Replace every 120,000 km (75,000 miles)
Spark plugs
ELECTRICAL SYSTEM
Function of all lights
I
I
I
I
I
I
I
I
I
I
I
I
8-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page261
Tuesday, May 9 2006 10:45 AM
Black plate (261,1)
Maintenance and Care
Scheduled Maintenance
Number of months or kilometers (miles), whichever comes first
Months
4
8
5
8
12 16 20 24 28 32 36 40 44 48
Maintenance Interval
×1000 km
16 24 32 40 48 56 64 72 80 88 96
10 15 20 25 30 35 40 45 50 55 60
×1000 miles
CHASSIS and BODY
Brake lines, hoses and connections
Brake and clutch fluid level
Disc brakes
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Tire (Rotation)
Rotate every 8,000 km (5,000 miles)
Tire inflation pressure and tire wear
Steering operation and linkages
Power steering fluid level
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Front and rear suspension and ball joints, and
wheel bearing axial play
I
I
*4*5
*5
Rear differential oil
Transfer oil
Driveshaft dust boots
Bolts and nuts on chassis and body
Exhaust system and heat shields
All locks and hinges
I
I
T
T
Inspect every 72,000 km (45,000 miles) or 5 years
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
L
I
Washer fluid level
8-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page262
Tuesday, May 9 2006 10:45 AM
Black plate (262,1)
Maintenance and Care
Scheduled Maintenance
Number of months or kilometers (miles), whichever comes first
Months
×1000 km
×1000 miles
4
8
5
8
12 16 20 24 28 32 36 40 44 48
Maintenance Interval
16 24 32 40 48 56 64 72 80 88 96
10 15 20 25 30 35 40 45 50 55 60
AIR CONDITIONER SYSTEM (if equipped)
Cabin air filter
Replace every 40,000 km (25,000 miles) or 2 years
Chart symbols:
I: Inspect and repair, clean, adjust, or replace if necessary.
R: Replace
L: Lubricate
T: Tighten
Remarks:
*1 Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding
area. Use FL22 when replacing the coolant.
*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not
void your emissions warranties. However, Mazda recommends that all maintenance services be performed at
the recommended time or mileage/kilometer period to ensure long-term reliability.
*3 If the vehicle is operated primarily under any of the following conditions, replace the spark plugs every 96,000
km (60,000 miles) or shorter.
a) Repeated short-distance driving
b) Extended periods of idling or low-speed operation
c) Driving for long periods in cold temperatures or extremely humid climates
*4 If the vehicle is operated primarily under any of the following conditions, replace the rear differential oil every
45,000 km (28,100 miles).
a) Driving in dusty, sandy or wet condition
b) Extended periods of idling or low speed operation
c) Repeated short trips of less than 16 km (10 miles)
*5 If this component has been submerged in water, the oil should be replaced.
8-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page263
Tuesday, May 9 2006 10:45 AM
Black plate (263,1)
Maintenance and Care
Owner Maintenance
Owner Maintenance Schedule
The owner or a qualified service technician should make these vehicle inspections at the
indicated intervals to ensure safe and dependable operation.
Bring any problem to the attention of an Authorized Mazda Dealer or qualified service
technician as soon as possible.
qWhen Refueling
l
Brake and clutch fluid level (page 8-17)
l
Engine coolant level (page 8-15)
l
Engine oil level (page 8-14)
l
Washer fluid level (page 8-18)
qAt Least Monthly
Tire inflation pressures (page 8-24)
qAt Least Twice a Year (For Example, Every Spring and Fall)
l
Power steering fluid level (page 8-18)
You can do the following scheduled maintenance items if you have some mechanical
ability and a few basic tools and if you closely follow the directions in this manual.
l
Engine coolant (page 8-15)
l
Engine oil (page 8-13)
8-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page264
Tuesday, May 9 2006 10:45 AM
Black plate (264,1)
Maintenance and Care
Owner Maintenance
Owner Maintenance Precautions
Improper or incomplete service may result in problems. This section gives instructions only
for items that are easy to perform.
qualified service technician with special tools.
Improper owner maintenance during the warranty period may affect warranty coverage.
For details, read the separate Mazda Warranty statement provided with the vehicle. If
you're unsure about any servicing or maintenance procedure, have it done by an
Authorized Mazda Dealer.
There are strict environmental laws regarding the disposal of waste oil and fluids. Please
dispose of your waste properly and with due regard to the environment.
We recommend that you entrust the oil and fluid changes of your vehicle to an Authorized
Mazda Dealer.
WARNING
Maintenance Procedures:
Performing maintenance work on a vehicle is dangerous if not done properly. You can
be seriously injured while performing some maintenance procedures. If you lack
sufficient knowledge and experience or the proper tools and equipment to do the work,
have it done by a qualified technician.
Running the Engine:
Working under the hood with the engine running is dangerous. It becomes even more
dangerous when you wear jewelry or loose clothing.
Either can become entangled in moving parts and result in injury.
Therefore, if you must run the engine while working under the hood, make certain
that you remove all jewelry (especially rings, bracelets, watches, and necklaces) and
all neckties, scarves, and similar loose clothing before getting near the engine or
cooling fan which may turn on unexpectedly.
Electrical Fan and Engine Inspection:
Working near the electrical cooling fan when it is running is dangerous. You could be
hit by the fan and seriously injured. Turn off the ignition switch and make sure the
fan is not running before attempting to work near the electrical cooling fan.
8-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page265
Tuesday, May 9 2006 10:45 AM
Black plate (265,1)
Maintenance and Care
Owner Maintenance
NOTE
Once the engine coolant exceeds a preset temperature, an electrical cooling fan turns on.
It will continue running for about 10 minutes after the ignition switch is turned to off.
8-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page266
Tuesday, May 9 2006 10:45 AM
Black plate (266,1)
Maintenance and Care
Owner Maintenance
Engine Compartment Overview
Engine oil-filler cap
Brake/Clutch fluid reservoir
Battery
Windshield washer
fluid reservoir
Power steering
fluid reservoir
Fuse block
Engine oil dipstick
Engine coolant
reservoir
Air filter
Cooling system cap
8-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page267
Tuesday, May 9 2006 10:45 AM
Black plate (267,1)
Maintenance and Care
Owner Maintenance
Only use oils “Certified For Gasoline
Engines” by the American Petroleum
Institute (API). An oil with this trademark
symbol conforms to the current engine
and emission system protection standards
and fuel economy requirements of the
International Lubricant Standardization
and Approval Committee (ILSAC),
comprised of U.S. and Japanese
Engine Oil
NOTE
Changing the engine oil should be done
by an Authorized Mazda Dealer.
qRecommended Oil
automobile manufacturers.
Use SAE 5W-30 engine oil.
Oil container labels provide important
information.
A chief contribution this type of oil makes
to fuel economy is reducing the amount of
fuel necessary to overcome engine
friction.
–30 –20 –10
0
10 20 30 40 50
–20
0
20 40 60 80 100 120
U.S.A. and CANADA
5W-30
Except U.S.A. and CANADA
(ILSAC)
(ILSAC)
8-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page268
Tuesday, May 9 2006 10:45 AM
Black plate (268,1)
Maintenance and Care
Owner Maintenance
The quality designation SL, or ILSAC
must be on the label.
CAUTION
Don't add engine oil over MAX. This
may cause engine damage.
–30 –20 –10
0
10 20 30 40 50
6. Make sure the O-ring on the dipstick is
positioned properly before reinserting
the dipstick.
–20
0
20 40 60 80 100 120
5W-30
qInspecting Engine Oil Level
1. Be sure the vehicle is on a level
surface.
2. Warm up the engine to normal
operating temperature.
3. Turn it off and wait at least 5 minutes
for the oil to return to the oil pan.
4. Pull out the dipstick, wipe it clean, and
reinsert it fully.
Full
OK
Low
5. Pull it out again and examine the level.
It's OK between MIN and MAX.
But if it's near or below MIN, add
enough oil to bring the level to MAX.
8-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page269
Tuesday, May 9 2006 10:45 AM
Black plate (269,1)
Maintenance and Care
Owner Maintenance
NOTE
Engine Coolant
Once the engine coolant exceeds a
preset temperature, an electrical cooling
fan turns on. It will continue running
for about 10 minutes after the ignition
switch is turned to off.
qInspecting Coolant Level
WARNING
Hot Engine:
A hot engine is dangerous. If the
engine has been running, parts of the
engine compartment can become very
hot. You could be burned. Carefully
inspect the engine coolant in the
coolant reservoir, but do not open it.
Do not use a match or live flame in the
engine compartment. DO NOT ADD
COOLANT WHEN THE ENGINE IS
HOT.
NOTE
Changing the coolant should be done
by an Authorized Mazda Dealer.
Inspect the antifreeze protection and
coolant level in the coolant reservoir at
least once a year―at the beginning of the
winter season―and before traveling
where temperatures may drop below
freezing.
Inspect the condition and connections of
all cooling system and heater hoses.
Replace any that are swollen or
deteriorated.
Electrical Fan and Engine
Inspection:
Working near the electrical cooling
fan when it is running is dangerous.
You could be hit by the fan and
seriously injured. Turn off the ignition
switch and make sure the fan is not
running before attempting to work
near the electrical cooling fan.
The coolant should be at full in the
radiator and between the FULL and LOW
marks on the coolant reservoir when the
engine is cool.
Cooling System Caps:
When the engine and radiator are hot,
scalding coolant and steam may shoot
out under pressure and cause serious
injury. Don't remove either cooling
system cap when the engine and
radiator are hot.
8-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page270
Tuesday, May 9 2006 10:45 AM
Black plate (270,1)
Maintenance and Care
Owner Maintenance
If it's at or near LOW, add enough coolant
to the coolant reservoir to provide
freezing and corrosion protection and to
bring the level to FULL.
NOTE
If the “FL22” mark is shown on or near
the cooling system cap, use FL22 type
engine coolant. If engine coolant other
than FL22 type is used, the engine
coolant must be replaced earlier than
the specified replacement interval
indicated in the scheduled maintenance
(page 8-3).
CAUTION
l
Radiator coolant will damage paint.
Rinse it off quickly if spilled.
l
Use only soft (demineralized) water
in the coolant mixture. Water that
contains minerals will cut down on
the coolant's effectiveness.
l
Don't add only water. Always add a
proper coolant mixture.
l
The engine has aluminum parts and
must be protected by an ethylene-
glycol-based coolant to prevent
corrosion and freezing.
l
DO NOT USE coolants Containing
Alcohol, methanol, Borate or
Silicate.
These coolants could damage the
cooling system.
If the coolant reservoir is empty or new
coolant is required frequently, consult an
Authorized Mazda Dealer.
l
DO NOT MIX alcohol or methanol
with the coolant. This could damage
the cooling system.
l
Don't use a solution that contains
more than 60% antifreeze.
This would reduce effectiveness.
8-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page271
Tuesday, May 9 2006 10:45 AM
Black plate (271,1)
Maintenance and Care
Owner Maintenance
qAdding Brake/Clutch Fluid
Brake/Clutch Fluid
q
Inspecting Brake/Clutch Fluid Level
WARNING
The brakes and clutch draw fluid from the
same reservoir.
Spilled Brake Fluid:
Spilled brake fluid is dangerous. If it
gets in your eyes, they could be
seriously injured. If this happens,
immediately flush your eyes with water
and get medical attention. Brake fluid
spilled on a hot engine could cause a
fire. Be careful not to spill brake fluid
on yourself or on the engine.
Inspect the fluid level in the reservoir
regularly. It should be kept at MAX.
The level normally drops with
accumulated distance, a condition
associated with wear of brake and clutch
linings. If it is excessively low, have the
brake/clutch system inspected by an
Authorized Mazda Dealer.
Low Brake/Clutch Fluid Levels:
Low brake/clutch fluid levels are
dangerous. Low levels could signal
brake lining wear or a brake system
leak. Your brakes could fail and cause
an accident. If you find a low fluid
level, have the brakes and clutch
inspected.
If the fluid level is low, add fluid until it
reaches MAX.
Before adding fluid, thoroughly clean the
area around the cap.
CAUTION
l
Brake and clutch fluid will damage
painted surfaces. If brake or clutch
fluid does get on a painted surface,
wash it off with water immediately.
l
Using nonspecified brake and clutch
systems. Mixing different fluids will
also damage them.
If the brake/clutch system frequently
requires new fluid, consult an
Authorized Mazda Dealer.
8-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page272
Tuesday, May 9 2006 10:45 AM
Black plate (272,1)
Maintenance and Care
Owner Maintenance
Power Steering Fluid
Washer Fluid
qInspecting Power Steering Fluid
qInspecting Washer Fluid Level
Level
WARNING
CAUTION
Use only windshield washer fluid or
plain water in the reservoir:
To avoid damage to the power steering
pump, don't operate the vehicle for long
periods when the power steering fluid
level is low.
Using radiator antifreeze as washer
fluid is dangerous. If sprayed on the
windshield, it will dirty the windshield,
affect your visibility, and could result
in an accident.
NOTE
Use specified power steering fluid
(page 10-4).
Using Washer Fluid Without Anti-
freeze Protection in Cold Weather:
Operating your vehicle in
temperatures below 4 degrees C (40
degrees F) using washer fluid without
anti-freeze protection is dangerous as
it could cause impaired windshield
vision and result in an accident. In
cold weather, always use washer fluid
with anti-freeze protection.
Inspect the fluid level in the reservoir at
each engine oil change with the engine off
and cold. Add fluid if necessary; it does
not require periodic changing.
NOTE
State or local regulations may restrict
the use of volatile organic compounds
(VOCs), which are commonly used as
anti-freeze agents in washer fluid. A
washer fluid with limited VOC content
should be used only if it provides
adequate freeze resistance for all
regions and climates in which the
vehicle will be operated.
The level must be kept between MIN and
MAX.
Visually examine the lines and hoses for
leaks and damage.
If new fluid is required frequently, consult
an Authorized Mazda Dealer.
8-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page273
Tuesday, May 9 2006 10:45 AM
Black plate (273,1)
Maintenance and Care
Owner Maintenance
Inspect fluid level in the washer fluid
reservoir; add fluid if necessary.
Body Lubrication
All moving points of the body, such as
door and hood hinges and locks, should
be lubricated each time the engine oil is
changed. Use a nonfreezing lubricant on
locks during cold weather.
Make sure the hood's secondary latch
keeps the hood from opening when the
primary latch is released.
To inspect the washer fluid level in the
front reservoir, pull off the cap. Then,
holding your thumb over the hole in the
center of the cap, lift it straight up. The
fluid level can be seen from the fluid
column in the pipe. Add fluid if necessary.
Use plain water if washer fluid is
unavailable. But use only washer fluid in
cold weather to prevent it from freezing.
8-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page274
Tuesday, May 9 2006 10:45 AM
Black plate (274,1)
Maintenance and Care
Owner Maintenance
NOTE
Wiper Blades
CAUTION
To prevent damage to the wiper arm
blades when raising both the driver and
passenger side wiper arms, raise the
driver side wiper arm first. Conversely,
when setting down the wiper arms, set
the passenger side wiper arm down
first.
l
Hot waxes applied by automatic car
washers have been known to affect
the wiper's ability to clean windows.
l
To prevent damage to the wiper
blades, don't use gasoline, kerosene,
paint thinner, or other solvents on or
near them.
1. Raise the wiper arm and turn the blade
assembly to expose the plastic locking
clip.
Compress the clip and slide the
assembly downward; then lift it off the
arm.
Contamination of either the windshield or
the blades with foreign matter can reduce
wiper effectiveness. Common sources are
insects, tree sap, and hot wax treatments
used by some commercial car washes.
If the blades are not wiping properly,
clean the window and blades with a good
cleaner or mild detergent; then rinse
thoroughly with clean water. Repeat if
necessary.
q
Replacing Windshield Wiper Blades
Plastic locking clip
When the wipers no longer clean well, the
blades are probably worn or cracked.
Replace them.
CAUTION
To prevent damage to the windshield let
the wiper arm down easily, don't let it
slap down on the windshield.
CAUTION
To prevent damage to the wiper arms
and other components, don't try to
sweep the wiper arm by hand.
8-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page275
Tuesday, May 9 2006 10:45 AM
Black plate (275,1)
Maintenance and Care
Owner Maintenance
2. Hold the end of the rubber and pull
until the tabs are free of the metal
support.
CAUTION
l
l
Don't bend or discard the stiffeners.
You need to use them again.
If the metal stiffeners are switched,
the blade's wiping efficiency could
be reduced.
Metal support
So don't use the driver's side metal
stiffeners on the passenger's side, or
vice versa.
Tab
l
Be sure to reinstall the metal
stiffeners in the new blade rubber so
that the curve is the same as it was in
the old blade rubber.
3. Remove the metal stiffeners from the
blade rubber and install them in the
new blade.
4. Carefully insert the new blade rubber.
Then install the blade assembly in the
reverse order of removal.
NOTE
Install the blade so that the tabs are
toward the bottom of the wiper arm.
8-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page276
Tuesday, May 9 2006 10:45 AM
Black plate (276,1)
Maintenance and Care
Owner Maintenance
Battery
WARNING
Battery-Related Lead Materials:
Battery posts, terminals and related accessories contain lead and lead compounds,
chemicals known to the State of California to cause cancer and reproductive harm.
Wash hands after handling.
Follow These Precautions Carefully:
To ensure safe and correct handling of the battery, read the following precautions
carefully before using the battery or inspecting it.
Eye Protection:
Working without eye protection is dangerous. Battery fluid contains SULFURIC
ACID which could cause blindness if splashed into your eyes. Also, hydrogen gas
produced during normal battery operation, could ignite and cause the battery to
explode. Always wear eye protection when working near the battery.
Spilled Battery Fluid:
Spilled battery fluid is dangerous.
Battery fluid contains SULFURIC ACID which could cause serious injuries if it gets
in eyes, skin or clothing. If this happens, immediately flush your eyes with water for
15 minutes or wash your skin thoroughly and get medical attention. Wear eye
protection and protective gloves to prevent contact with battery fluid.
Children and Batteries:
Allowing children to play near batteries is dangerous. Battery fluid could cause
serious injuries if it gets in the eyes or on the skin. Always keep batteries out of the
reach of children.
8-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page277
Tuesday, May 9 2006 10:45 AM
Black plate (277,1)
Maintenance and Care
Owner Maintenance
WARNING
Keep Flames Away:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries. Keep all flames including
cigarettes and sparks away from open battery cells. When working near a battery, do
not allow metal tools to contact the positive ( ) or negative ( ) terminal of the
battery. Do not allow the positive ( ) terminal to contact the vehicle body.
Battery-Related Explosion:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries. Keep all flames, including
cigarettes, and sparks away from open battery cells.
l
Rinse off spilled electrolyte
immediately with a solution of water
and baking soda.
qBattery Maintenance
l
If the vehicle will not be used for an
extended time, disconnect the battery
cables and charge the battery every six
weeks.
To get the best service from a battery:
l
Keep it securely mounted.
l
Keep the top clean and dry.
l
Keep terminals and connections clean,
tight, and coated with petroleum jelly
or terminal grease.
8-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page278
Tuesday, May 9 2006 10:45 AM
Black plate (278,1)
Maintenance and Care
Owner Maintenance
qTire Inflation Pressure
Tires
For reasons of proper performance, safety,
and better fuel economy, always maintain
recommended tire inflation pressures and
stay within the recommended load limits
and weight distribution.
WARNING
Incorrect Tire Inflation:
Overinflation or underinflation of tires
is dangerous. Adverse handling or
unexpected tire failure could result in
a serious accident. Always inflate the
tires to the correct pressure (page
WARNING
Using Different Tire Types:
Driving your vehicle with different
types of tires is dangerous. It could
cause poor handling and poor
braking; leading to loss of control.
Except for the limited use of the
temporary spare tire, use only the
same type tires (radial, bias-belted,
bias-type) on all four wheels.
Using Wrong-Sized Tires:
Using any other tire size than what is
specified for your Mazda (page 10-6)
is dangerous. It could seriously affect
ride, handling, ground clearance, tire
clearance, and speedometer
Refer to the specification charts (page
calibration. This could cause you to
have an accident. Use only tires that
are the correct size specified for your
Mazda.
8-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page279
Tuesday, May 9 2006 10:45 AM
Black plate (279,1)
Maintenance and Care
Owner Maintenance
Also, inspect them for uneven wear and
damage. Abnormal wear is usually caused
by one or a combination of the following:
NOTE
l
Always check tire pressure when
tires are cold.
l
Incorrect tire pressure
l
Warm tires normally exceed
l
Improper wheel alignment
recommended pressures. Don't
release air from warm tires to adjust
the pressure.
l
Out-of-balance wheel
l
Severe braking
l
Underinflation can cause reduced
fuel economy, uneven and
After rotation, inflate all tire pressures to
lug nuts for tightness.
accelerated tire wear, and poor
sealing of the tire bead, which will
deform the wheel and cause
separation of tire from rim.
CAUTION
l
Overinflation can produce a harsh
ride, uneven and accelerated tire
wear, and a greater possibility of
damage from road hazards.
Keep your tire pressure at the correct
levels. If one frequently needs
inflating, have it inspected.
Rotate unidirectional tires and radial
tires that have an asymmetrical tread
pattern or studs only from front to rear,
not from side to side. Tire performance
will be weakened if rotated from side to
side.
qTire Rotation
qReplacing a Tire
To equalize tread wear, rotate the tires if
irregular wear develops. According to the
scheduled maintenance charts.Refer to
Scheduled Maintenance on page 8-3.
During rotation, inspect them for correct
balance.
WARNING
Worn Tires:
Driving with worn tires is dangerous.
Reduced braking, steering, and
traction could result in an accident.
Always use tires that are in good
condition.
Forward
Do not include (TEMPORARY USE ONLY)
spare tire in rotation.
8-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page280
Tuesday, May 9 2006 10:45 AM
Black plate (280,1)
Maintenance and Care
Owner Maintenance
If a tire wears evenly, a wear indicator
will appear as a solid band across the
tread.
qTemporary Spare Tire
Inspect the temporary spare tire at least
monthly to make sure it's properly inflated
and stored.
Replace the tire when this happens.
Tread wear indicator
NOTE
The temporary spare tire condition
gradually deteriorates even if it has not
been used.
The temporary spare tire is easier to
handle because of its construction. It is
lighter and smaller than a conventional
tire and should be used only for an
emergency and only for a short distance.
New tread
Worn tread
You should replace it before the band is
across the entire tread.
Use the temporary only until the
conventional tire is repaired, which should
be as soon as possible.
NOTE
Tires degrade over time, even when
they are not being used on the road. It is
recommended that tires generally be
replaced when they are 6 years or older.
Heat caused by hot climates or frequent
high loading conditions can accelerate
the aging process. You should replace
the spare tire when you replace the
other road tires due to the aging of the
spare tire. Regarding the manufacturing
week and year is indicated with 4 digit.
Refer to The tire labeling on page 9-18.
Maintain its pressure at 420 kPa (4.2
kgf/cm2 or bar, 60 psi).
CAUTION
l
Don't use your temporary spare tire
rim with a snow tire or a
conventional tire. Neither will
properly fit and could damage both
tire and rim.
l
The temporary spare tire has a tread
life of less than 5,000 km (3,000
miles). The tread life may be shorter
depending on driving conditions.
l
The temporary spare tire is for
limited use, however, if the tread
wear solid-band indicator appears,
replace the tire with the same type of
temporary spare (page 8-25).
8-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page281
Tuesday, May 9 2006 10:45 AM
Black plate (281,1)
Maintenance and Care
Owner Maintenance
When replacing a wheel, make sure the
new one is the same as the original factory
wheel in diameter, rim width, and offset.
NOTE
Tires degrade over time, even when
they are not being used on the road. It is
recommended that tires generally be
replaced when they are 6 years or older.
Heat caused by hot climates or frequent
high loading conditions can accelerate
the aging process. You should replace
the spare tire when you replace the
other road tires due to the aging of the
spare tire. Regarding the manufacturing
week and year is indicated with 4 digit.
Refer to The tire labeling on page 9-18.
Proper tire balancing provides the best
riding comfort and helps reduce tread
wear. Out-of-balance tires can cause
vibration and uneven wear, such as
cupping and flat spots.
qReplacing a Wheel
WARNING
Using a Wrong-Sized Wheel:
Using a wrong-sized wheel is
dangerous. Braking and handling
could be affected, leading to loss of
control and an accident. Always use
wheels of the correct size on your
vehicle.
CAUTION
A wrong-sized wheel may adversely
affect:
l
Tire fit
l
Wheel and bearing life
l
Ground clearance
l
Speedometer calibration
l
Headlight aim
l
Bumper height
8-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page282
Tuesday, May 9 2006 10:45 AM
Black plate (282,1)
Maintenance and Care
Owner Maintenance
Light Bulbs
Overhead light/Map lights
Headlights (Low beam)
Parking lights
Headlights (High beam)
Side-marker lights
Fog lights
Front turn signal lights
Brake lights/Taillights
Trunk light
High-mount brake light
Courtesy lights
Rear turn signal lights
Reverse lights
Taillights
License plate lights
The equipment and installation position varies according to model and grade.
8-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page283
Tuesday, May 9 2006 10:45 AM
Black plate (283,1)
Maintenance and Care
Owner Maintenance
Front turn signal lights
WARNING
1. Turn the socket and bulb assembly
counterclockwise and remove it.
Do not replace the xenon fusion bulbs
yourself:
2. Remove the bulb by pushing it in
slightly and turning it
Replacing the xenon fusion bulbs
yourself is dangerous. Because the
xenon fusion bulbs require high
voltage, you could receive an electric
shock if the bulbs are handled
incorrectly. Consult an Authorized
Mazda Dealer when the replacement is
necessary.
counterclockwise.
Handling Halogen Bulbs:
When a halogen bulb breaks, it is
dangerous. These bulbs contain
pressurized gas. If one is broken, it
will explode and serious injuries could
be caused by the flying glass.
If the glass portion is touched with
bare hands, body oil could cause the
bulb to overheat and explode when lit.
Never touch the glass portion of the
bulb with your bare hands and always
wear eye protection when handling or
working around halogen bulbs.
3. Install the new bulb in the reverse order
of removal.
Side-marker lights
1. If you are changing the left side-maker
light, start the engine, turn the steering
wheel all the way to the right, and turn
off the engine. If you are changing the
right side-maker light, turn the steering
wheel to the left.
Children and Halogen Bulbs:
Playing with a halogen bulb is
dangerous. Serious injuries could be
caused by dropping a halogen bulb or
breaking it some other way.
2. Turn the screws counterclockwise and
remove them.
Always keep halogen bulbs out of the
reach of children.
qReplacing Exterior Light Bulbs
Replacing the headlight, fog light and
parking light bulbs
Due to the complexity and difficulty of
the procedure, the bulbs should be
replaced by an Authorized Mazda Dealer.
8-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page284
Tuesday, May 9 2006 10:45 AM
Black plate (284,1)
Maintenance and Care
Owner Maintenance
3. Turn the center section of the plastic
retainers counterclockwise and remove
them, and partially peel back the
mudguard.
Brake lights/Taillights, Rear turn signal
lights
1. Pull the center section of the plastic
retainer and remove the retainers and
partially open the trunk side trim.
Removal
Installation
Removal
Installation
4. Turn the socket and bulb assembly
counterclockwise and remove it.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
5. Disconnect the bulb from the socket.
3. Disconnect the bulb from the socket.
Brake lights/Taillights
6. Install the new bulb in the reverse order
of removal.
8-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page285
Tuesday, May 9 2006 10:45 AM
Black plate (285,1)
Maintenance and Care
Owner Maintenance
Rear turn signal lights
3. Disconnect the bulb from the socket.
Reverse lights
Taillights
4. Install the new bulb in the reverse order
of removal.
4. Install the new bulb in the reverse order
of removal.
License plate lights
NOTE
1. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the lens and
remove the lens by carefully prying on
the edge of the lens.
To replace the bulb, contact an
Authorized Mazda Dealer.
Reverse lights, Taillights
2. Disconnect the bulb by pulling it out.
1. Pull the center section of the plastic
retainer and remove the retainers, then
remove the trunk rear trim.
Removal
Installation
3. Install the new bulb in the reverse order
of removal.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
8-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page286
Tuesday, May 9 2006 10:45 AM
Black plate (286,1)
Maintenance and Care
Owner Maintenance
Overhead light/Map lights (Rear)
qReplacing Interior Light Bulbs
Overhead light/Map lights (Front)
1. Remove the screws.
1. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the trim and
gently insert it in the overhead light as
shown in the figure, and then remove
the overhead light unit.
2. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the trim and
gently insert it in the overhead light as
shown in the figure, and then remove
the overhead light unit.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
3. Disconnect the bulb from the socket.
3. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Disconnect the bulb from the socket.
4. Install the new bulb in the reverse order
of removal.
5. Install the new bulb in the reverse order
of removal.
8-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page287
Tuesday, May 9 2006 10:45 AM
Black plate (287,1)
Maintenance and Care
Owner Maintenance
Courtesy lights, Vanity mirror lights
Trunk light
1. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens and remove the lens by carefully
prying on the edge of the lens.
1. Press both sides of the lens cap to
remove it.
2. Disconnect the bulb by pulling it out.
2. Disconnect the bulb by pulling it out.
Courtesy lights
Edge
3. Install the new bulb in the reverse order
of removal.
Vanity mirror lights
Edge
3. Install the new bulb in the reverse order
of removal.
8-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page288
Tuesday, May 9 2006 10:45 AM
Black plate (288,1)
Maintenance and Care
Owner Maintenance
3. Pull the fuse straight out with the fuse
puller provided on the fuse block
located in the engine compartment.
Fuses
Your vehicle's electrical system is
protected by fuses.
If any lights, accessories, or controls don't
work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element will be melted.
If the same fuse blows again, avoid using
that system and consult an Authorized
Mazda Dealer as soon as possible.
qFuse Replacement
4. Inspect the fuse and replace it if it's
blown.
Replacing the fuses on the driver's side
kick-panel
If the electrical system doesn't work, first
inspect fuses on the driver's side kick-
panel.
1. Turn off the ignition switch and other
switches.
2. Open the fuse panel cover by sliding
the cover straight back toward you.
Blown
Normal
5. Push in a new fuse of the same
amperage rating, and make sure it fits
tightly. If it doesn't, have an expert
repairer install it. We recommend an
Authorized Mazda Dealer.
If you have no spare fuses, borrow one
of the same rating from a circuit not
essential to vehicle operation, such as
the AUDIO or CIGAR circuit.
CAUTION
Pulling the cover off sideways may
break the retaining tabs off.
8-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page289
Tuesday, May 9 2006 10:45 AM
Black plate (289,1)
Maintenance and Care
Owner Maintenance
3. If any fuse but the MAIN fuse is
blown, replace it with a new one of the
same amperage rating.
CAUTION
Always replace a fuse with one of the
same rating. Otherwise you may
damage the electric system.
Replacing the fuses under the hood
If the headlights or other electrical
components do not work and the fuses in
the cabin are normal, inspect the fuse
block under the hood. If a fuse is blown, it
must be replaced. Follow these steps:
Normal
Blown
1. Turn off the ignition switch and all
other switches.
2. Remove the fuse block cover.
WARNING
Do not replace the main fuse by
yourself. Have an Authorized Mazda
Dealer perform the replacement:
Replacing the fuse by yourself is
dangerous because the MAIN fuse is a
high current fuse. Incorrect
replacement could cause an electrical
shock or a short circuit resulting in a
fire.
8-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page290
Tuesday, May 9 2006 10:45 AM
Black plate (290,1)
Maintenance and Care
Owner Maintenance
qFuse Panel Description
Fuse block (Engine compartment)
FUSE
DESCRIPTION
PROTECTED COMPONENT
RATING
1
2
SPARE
SPARE
SPARE
M DEF
―
20A
15A
10A
7.5A
―
―
―
―
3
4
Mirror defrosterí
5
―
6
INJ
15A
15A
5A
PCM
7
ENG BAR
ENG BB
HEAD LR
HEAD LL
HEAD HL
HEAD HR
DRL
O2 Sensor, EGR control valve
8
Waste gate solenoid, Cooling fan
Headlight-low beam (Right)
Headlight-low beam (Left)
Headlight-high beam (Left)
Headlight-high beam (Right)
DRLí (Headlight high beams)
Turn signal lights
9
15A
15A
10A
10A
15A
10A
20A
10A
10A
10
11
12
13
14
15
16
17
HAZARD
STOP
Brake lights, Horn
ENG+B
ETC
PCM, AWD
Electronic throttle
8-36
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page291
Tuesday, May 9 2006 10:45 AM
Black plate (291,1)
Maintenance and Care
Owner Maintenance
FUSE
RATING
DESCRIPTION
PROTECTED COMPONENT
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
―
IG KEY 1
P.WIND
FUEL PUMP
INJ DRIVE
―
―
―
30A
30A
30A
30A
―
Engine control, SAS, Instrument cluster, Lighter
Power windows
Fuel pump
Injector
―
BLOWER
BTN
40A
40A
40A
40A
60A
30A
30A
10A
10A
10A
15A
30A
―
Blower motor
Overhead light, Power door lock
IG KEY 2
DEFOG
ABS
Wiper and washer, Climate control unit
Rear window defroster
DSC
FAN2
Cooling fan
FAN1
Cooling fan
TAIL
Taillights, License plate lights
ILLUMI
MAG
Dashboard illumination
Magnet clutch
AUDIO
P.SEAT
―
Audio system
Power seatí
―
―
―
―
H/CLEAN
FOG
20A
15A
120A
―
Fog lights
MAIN
For protection of all circuits
íSome models.
8-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page292
Tuesday, May 9 2006 10:45 AM
Black plate (292,1)
Maintenance and Care
Owner Maintenance
Fuse block (Driver's side kick-panel)
FUSE
DESCRIPTION
PROTECTED COMPONENT
RATING
1
2
P.WIND IG
P.WIND
D.LOCK
CIGAR
―
―
―
―
3
30A
15A
5A
Power door lock
Lighter
4
5
MIRROR
METER ACC
R.CIGAR
SPARE
Power control mirror, Audio system
6
5A
Auto light off unit
7
15A
10A
15A
10A
15A
20A
15A
10A
15A
―
Accessory socket
8
―
9
ENGINE IG
SAS
Engine control system
10
11
12
13
14
15
16
17
18
DSC unit, SAS unit
METER IG
WIPER
Instrument cluster, Reverse lights
Windshield wiper and washer
SPARE
―
A/C
Heater
SEAT
Seat warmerí, Rear window defroster
R.WIP
―
ROOM
15A
20A
Overhead light
SPARE
―
8-38
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page293
Tuesday, May 9 2006 10:45 AM
Black plate (293,1)
Maintenance and Care
Appearance Care
qDamage Caused by Bird
How to Minimize
Environmental Paint Damage
Dropping, Insects, or Tree Sap
Occurrence
The paintwork on your Mazda represents
the latest technical developments in
composition and methods of application.
Bird droppings contain acids. If these
aren't removed they can eat away the clear
and color base coat of the vehicle's
paintwork.
Environmental hazards, however, can
harm the paint's protective properties, if
proper care is not taken.
When insects stick to the paint surface
and decompose, corrosive compounds
form. These can erode the clear and color
base coat of the vehicle's paintwork if
they are not removed.
Here are some examples of possible
damage, with tips on how to prevent
them.
Tree sap will harden and adhere
qEtching Caused by Acid Rain or
permanently to the paint finish. If you
scratch the sap off while it is hard, some
vehicle paint could come off with it.
Industrial Fallout
Occurrence
Prevention
Industrial pollutants and vehicle emissions
drift into the air and mix with rain or dew
to form acids. These acids can settle on a
vehicle's finish. As the water evaporates,
the acid becomes concentrated and can
damage the finish.
It is necessary to have your Mazda
washed and waxed to preserve its finish
according to the instructions in this
section. This should be done as soon as
possible.
And the longer the acid remains on the
surface, the greater the chance is for
damage.
Bird droppings can be removed with a
soft sponge and water. If you are traveling
and these are not available, a moistened
tissue may also take care of the problem.
The cleaned area should be waxed
according to the instructions in this
section.
Insects and tree sap are best removed with
a soft sponge and water or a commercially
available chemical cleaner.
Prevention
It is necessary to wash and wax your
vehicle to preserve its finish according to
the instructions in this section. These
steps should be taken immediately after
you suspect that acid rain has settled on
your vehicle's finish.
Another method is to cover the affected
area with dampened newspaper for one to
two hours. After removing the newspaper,
rinse off the loosened debris with water.
8-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page294
Tuesday, May 9 2006 10:45 AM
Black plate (294,1)
Maintenance and Care
Appearance Care
qWater Marks
NOTE
Occurrence
l
The paint chipping zone varies with
the speed of the vehicle. For
example, when traveling at 90 km/h
(56 mph), the paint chipping zone is
50 m (164 ft).
Rain, fog, dew, and even tap water can
contain harmful minerals such as salt and
lime. If moisture containing these
minerals settles on the vehicle and
evaporates, the minerals will concentrate
and harden to form white rings. The rings
can damage your vehicle's finish.
l
l
In low temperatures a vehicle's finish
hardens. This increases the chance of
paint chipping.
Prevention
Chipped paint can lead to rust
forming on your Mazda. Before this
happens, repair the damage by using
Mazda touch-up paint according to
the instructions in this section.
Failure to repair the affected area
could lead to serious rusting and
expensive repairs.
It is necessary to wash and wax your
vehicle to preserve its finish according to
the instructions in this section. These
steps should be taken immediately after
you find water marks on your vehicle's
finish.
qPaint Chipping
Occurrence
Paint chipping occurs when gravel thrown
in the air by another vehicle's tires hits
your vehicle.
How to avoid paint chipping
Keeping a safe distance between you and
the vehicle ahead reduces the chances of
having your paint chipped by flying
gravel.
8-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page295
Tuesday, May 9 2006 10:45 AM
Black plate (295,1)
Maintenance and Care
Appearance Care
To minimize scratches on the vehicle's
paint finish:
Exterior Care
Follow all label and container directions
when using a chemical cleaner or polish.
Read all warnings and cautions.
l
Rinse off any dirt or other foreign
matter using lukewarm or cold water
before washing.
l
Use plenty of lukewarm or cold water
qMaintaining the Finish
and a soft cloth when washing the
vehicle. Do not use a nylon cloth.
Washing
l
To help protect the finish from rust and
deterioration, wash your Mazda
Rub gently when washing or drying the
vehicle.
thoroughly and frequently, at least once a
month, with lukewarm or cold water.
l
Take your vehicle only to a car wash
that keeps its brushes well maintained.
l
Don't use abrasive cleansers or wax
that contain abrasives.
If the vehicle is washed improperly, the
paint surface could be scratched. Here are
some examples of how scratching could
occur.
CAUTION
Scratches occur on the paint surface
when:
l
Don't use steel wool, abrasive
cleaners, or strong detergents
containing highly alkaline or caustic
agents on chrome-plated or anodized
aluminum parts. This may damage
the protective coating; also, cleaners
and detergents may discolor or
deteriorate the paint.
l
The vehicle is washed without first
rinsing off dirt and other foreign
matter.
l
The vehicle is washed with a rough,
dry, or dirty cloth.
l
The vehicle is washed at a car wash
l
To prevent damaging the antenna,
that uses brushes that are dirty or too
stiff.
remove it before entering a car wash
facility or passing beneath a low
overhead clearance.
l
Cleansers or wax containing abrasives
are used.
Pay special attention to removing salt,
dirt, mud, and other foreign material from
the underside of the fenders, and make
sure the drain holes in the lower edges of
the doors and rocker panels are clean.
NOTE
l
Mazda is not responsible for
scratches caused by automatic car
washes or improper washing.
l
Scratches are more noticeable on
vehicles with darker paint finishes.
8-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page296
Tuesday, May 9 2006 10:45 AM
Black plate (296,1)
Maintenance and Care
Appearance Care
Insects, tar, tree sap, bird droppings,
industrial fallout, and similar deposits can
damage the finish if not removed
immediately. When prompt washing with
plain water is ineffective, use a mild soap
made for use on vehicles.
3. When waxing, coat evenly with the
sponge supplied or a soft cloth.
4. Wipe off the wax with a soft cloth.
NOTE
A spot remover to remove oil, tar, and
similar materials will usually also take
off the wax. Rewax these areas even if
the rest of the vehicle doesn't need it.
Thoroughly rinse off all soap with
lukewarm or cold water. Don't allow soap
to dry on the finish.
After washing the vehicle, dry it with a
clean chamois to prevent water spots from
forming.
qRepairing Damage to the Finish
Deep scratches or chips on the finish
should be repaired promptly. Exposed
metal quickly rusts and can lead to major
repairs.
WARNING
Driving with Wet Brakes:
Driving with wet brakes is dangerous.
Increased stopping distance or the
vehicle pulling to one side when
braking could result in a serious
accident. Light braking will indicate
whether the brakes have been affected.
Dry the brakes by driving very slowly
and applying the brakes lightly until
brake performance is normal.
CAUTION
If your Mazda is damaged and needs
metal parts repaired or replaced, make
sure the body shop applies anti-
corrosion materials to all parts, both
repaired and new. This will prevent
them from rusting.
qBright-Metal Maintenance
Waxing
l
Use tar remover to remove road tar and
Your vehicle needs to be waxed when
water no longer beads on the finish.
Always wash and dry the vehicle before
waxing it. In addition to the vehicle body,
wax the metal trim to maintain its luster.
insects. Never do this with a knife or
similar tool.
l
To prevent corrosion on bright-metal
surfaces, apply wax or chrome
preservative and rub it to a high luster.
1. Use wax which contains no abrasives.
Waxes containing abrasive will remove
paint and could damage bright metal
parts.
l
During cold weather or in coastal areas,
cover bright-metal parts with a coating
of wax or preservative heavier than
usual. It would also help to coat them
with noncorrosive petroleum jelly or
some other protective compound.
2. Use a good grade of natural wax for
metallic, mica, and solid colors.
8-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page297
Tuesday, May 9 2006 10:45 AM
Black plate (297,1)
Maintenance and Care
Appearance Care
CAUTION
WARNING
Don't use steel wool, abrasive cleaners,
or strong detergents containing highly
alkaline or caustic agents on chrome-
plated or anodized aluminum parts.
This may result in damage to the
protective coating and cause
Driving with Wet Brakes:
Driving with wet brakes is dangerous.
Increased stopping distance or the
vehicle pulling to one side when
braking could result in a serious
accident. Light braking will indicate
whether the brakes have been affected.
Dry the brakes by driving very slowly
and applying the brakes lightly until
brake performance is normal.
discoloration or paint deterioration.
qUnderbody Maintenance
Road chemicals and salt used for ice and
snow removal and solvents used for dust
control may collect on the underbody. If
not removed, they will speed up rusting
and deterioration of such underbody parts
as fuel lines, frame, floor pan, and exhaust
system, even though these parts may be
coated with anti-corrosive material.
qAluminum Wheel Maintenance
A protective coating is provided over the
aluminum wheels. Special care is needed
to protect this coating.
NOTE
Thoroughly flush the underbody and
wheel housings with lukewarm or cold
water at the end of each winter. Try also
to do this every month.
l
Don't use a wire brush or any
abrasive cleaner, polishing
compound, or solvent on aluminum
wheels. They may damage the
coating.
Pay special attention to these areas
because they easily hide mud and dirt. It
will do more harm than good to wet
down the road grime without removing
it.
l
Only use a mild soap or neutral
detergent and always use a sponge or
soft cloth to clean the wheels.
Rinse thoroughly with lukewarm or
cold water. Also, be sure to clean the
wheels after driving on dusty or
salted roads. This helps prevent
corrosion.
The lower edges of doors, rocker panels,
and frame members have drain holes that
should not be clogged. Water trapped
there will cause rusting.
l
Avoid washing your vehicle in an
automatic car wash that uses high-
speed or hard brushes.
l
If your aluminum wheels lose luster,
wax the wheels.
8-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page298
Tuesday, May 9 2006 10:45 AM
Black plate (298,1)
Maintenance and Care
Appearance Care
To keep the fabric looking clean and
fresh, take care of it. Otherwise its color
will be affected, it can be stained easily,
and its fire-resistance may be reduced.
Interior Care
qDashboard Precautions
Prevent caustic solutions such as perfume
and cosmetic oils from contacting the
dashboard. They'll damage and discolor it.
If these solutions get on the dashboard,
wipe them off immediately.
CAUTION
Use only recommended cleaners and
procedures. Others may affect
appearance and fire-resistance.
CAUTION
qCleaning the Lap/Shoulder Belt
Do not use glazing agents.
Webbing
Glazing agents contain ingredients
which may cause discoloration,
wrinkling, cracks and peeling.
Clean the webbing with a mild soap
solution recommended for upholstery or
carpets. Follow instructions. Don't bleach
or dye the webbing; this may weaken it.
qCleaning the Upholstery and
Interior Trim
After cleaning the belts, thoroughly dry
the belt webbing and make sure there is
no remaining moisture before retracting
them.
Vinyl
Remove dust and loose dirt from vinyl
with a whisk broom or vacuum cleaner.
Clean vinyl with a leather-and-vinyl
cleaner.
WARNING
Leatherí
Damaged Seat Belt:
Real leather isn't uniform and may have
scars, scratches, and wrinkles. Clean it
with a leather cleaner or mild soap.
Using damaged seat belts is
dangerous. In a collision, damaged
belts cannot provide adequate
protection. Have an Authorized Mazda
Dealer replace damaged belts
immediately.
Wipe it with a damp soft cloth; then dry
and buff it with a dry soft cloth.
Fabricí
Remove dust and loose dirt from fabric
with a whisk broom or vacuum cleaner.
Clean it with a mild soap solution good
for upholstery and carpets. Remove fresh
spots immediately with a fabric spot
cleaner.
8-44
íSome models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page299
Tuesday, May 9 2006 10:45 AM
Black plate (299,1)
Maintenance and Care
Appearance Care
qCleaning the Window Interiors
If the windows become covered with an
oily, greasy, or waxy film, clean them
with glass cleaner. Follow the directions
on the container.
CAUTION
Don't scrape or scratch the inside of the
rear window. You may damage the rear
window defroster grid.
8-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page300
Tuesday, May 9 2006 10:45 AM
Black plate (300,1)
8-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page301
Tuesday, May 9 2006 10:45 AM
Black plate (301,1)
Customer Information and Reporting
Safety Defects
9
Important consumer information including warranties and add-on equipment.
9-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page302
Tuesday, May 9 2006 10:46 AM
Black plate (302,1)
Customer Information and Reporting Safety Defects
Customer Assistance
Customer Assistance (U.S.A.)
Your complete and permanent satisfaction is our business. We are here to serve you. All
Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle
in top condition.
If you have any questions or recommendations for improvement regarding the service of
your Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take
the following steps:
qSTEP 1: Contact Your Mazda Dealer
Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to
address the issue. If your concern has not been resolved by the CUSTOMER RELATIONS,
SALES, SERVICE, or PARTS MANAGER, then please contact the GENERAL
MANAGER of the dealership or the OWNER.
qSTEP 2: Contact Mazda North American Operations
If for any reason you feel the need for further assistance after contacting your dealership
management, you can reach Mazda North American Operations by one of the following
ways.
Log on: at www.mazdaUSA.com
Answers to many questions, including how to locate or contact a local Mazda dealership in
the U.S., can be found here.
E-mail: click on “Contact Us” at the bottom of the page at www.mazdaUSA.com
By phone at: 1 (800) 222-5500
By letter at:
Attn: Customer Assistance
Mazda North American Operations
7755 Irvine Center Drive
Irvine, CA 92618-2922
P.O. Box 19734
Irvine, CA 92623-9734
In order to serve you efficiently and effectively, please help us by providing the following
information:
1. Your name, address, and telephone number
2. Year and model of vehicle
9-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page303
Tuesday, May 9 2006 10:46 AM
Black plate (303,1)
Customer Information and Reporting Safety Defects
Customer Assistance
3. Vehicle Identification Number (17 digits, noted on your registration or title or located on
the upper driver's side corner of the dash)
4. Purchase date and current mileage
5. Your dealer's name and location
6. Your question(s)
If you live outside the U.S.A., please contact your nearest Mazda Distributor.
9-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page304
Tuesday, May 9 2006 10:46 AM
Black plate (304,1)
Customer Information and Reporting Safety Defects
Customer Assistance
Customer Assistance (Canada)
qSatisfaction Review Process
Your complete and permanent satisfaction is of primary concern to Mazda. All Authorized
Mazda Dealers have both the knowledge and tools to keep your Mazda in top condition. In
our experience, any questions, problems, or complaints regarding the operation of your
Mazda or any other general service transactions are most effectively resolved by your
dealer. If the cause of your dissatisfaction cannot adequately be addressed by normal
dealership procedures, we recommend that you take the following steps:
qSTEP 1: Contact the Mazda Dealer
Discuss the matter with a member of dealership management. If the Service Manager has
already reviewed your concerns, contact the owner of the dealership or its General
Manager.
qSTEP 2: Contact the Mazda Regional Office
If you feel that you still require assistance, ask the dealer Service Manager to arrange for
you to meet the local Mazda Service Representative. If more expedient, contact Mazda
Canada Inc.Regional Office nearest you for such arrangements. Regional Office address
and phone numbers are shown (page 9-6).
qSTEP 3: Contact the Mazda Customer Relations Department
If still not substantially satisfied, contact the Customer Relations Department, Mazda
Canada Inc., 55 Vogell Road, Richmond Hill, Ontario, L4B 3K5 Canada TEL: 1 (800)
263-4680.
Provide the Department with the following information:
1. Your name, address and telephone number
2. Year and model of vehicle
3. Vehicle Identification Number (VIN). Refer to the “Vehicle Identification Labels” page
of section 10 of this manual for the location of the VIN.
4. Purchase date
5. Present odometer reading
6. Your dealer's name and location
7. The nature of your problem and/or cause of dissatisfaction
The Department, in cooperation with the local Mazda Service Representative, will review
the case to determine if everything possible has been done to ensure your satisfaction.
9-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page305
Tuesday, May 9 2006 10:46 AM
Black plate (305,1)
Customer Information and Reporting Safety Defects
Customer Assistance
Please recognize that the resolution of service problems in most cases requires the use of
your Mazda dealer's service facilities, personnel and equipment. We urge you to follow the
above three steps in sequence for most effective results.
qMediation/Arbitration Program
Occasionally a customer concern cannot be resolved through Mazda's Customer
Satisfaction Program. If after exhausting the procedures in this manual your concern is still
not resolved, you have another option.
Mazda Canada Inc. participates in an arbitration program administered by the
Canadian Motor Vehicle Arbitration Plan (CAMVAP). CAMVAP will advise you about
how your concern may be reviewed and resolved by an independent third party through
binding arbitration.
Your complete satisfaction is the goal of Mazda Canada Inc. and our dealers.
Mazda's participation in CAMVAP makes a valuable contribution to our achieving that
goal. There is no charge for using CAMVAP. CAMVAP results are fast, fair and final as the
award is binding on both you and Mazda Canada Inc.
qCanadian Motor Vehicle Arbitration Plan (CAMVAP)
If a specific item of concern arises, where a solution cannot be reached between an owner,
Mazda, and/or one of it's dealers (that all parties cannot agree upon), the owner may wish
to use the services offered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).
CAMVAP uses the services of Provincial Administrators to assist consumers in scheduling
and preparing for their arbitration hearings. However, before you can proceed with
CAMVAP you must follow your Mazda dispute resolution process as outlined previously.
9-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page306
Tuesday, May 9 2006 10:46 AM
Black plate (306,1)
Customer Information and Reporting Safety Defects
Customer Assistance
CAMVAP is fully implemented in all provinces and territories.
Consumers wishing to obtain further information about the Program should contact the
Provincial Administrator at 1 (800) 207-0685, or by contacting the
Canadian Motor Vehicle Arbitration Plan Office at:
Canadian Motor Vehicle Arbitration Plan
235 Yorkland Boulevard, suite 300
North York, Ontario
M2J 4Y8
http://camvap.ca
Provincial Administrators may be reached locally as listed below:
Province/Territory
British Columbia & Yukon Territories
Alberta & Northwest Territories
Saskatchewan
CAMVAP Number
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
1 (800) 207-0685
Manitoba
Ontario
Atlantic Canada
Quebec
qRegional Offices
REGIONAL OFFICES
AREAS COVERED
MAZDA CANADA INC.
WESTERN REGION
8171 ACKROYD ROAD
SUITE 2000
ALBERTA,
BRITISH COLUMBIA,
MANITOBA,
RICHMOND B.C.
V6X 3K1
SASKATCHEWAN,
YUKON
(604) 303-5670
MAZDA CANADA INC.
CENTRAL/ATLANTIC REGION
55 VOGELL ROAD,
ONTARIO
RICHMOND HILL,
ONTARIO, L4B 3K5
(905) 787-7000
MAZDA CANADA INC.
QUEBEC REGION
6111 ROUTE TRANS
CANADIENNE
QUEBEC,
NEW BRUNSWICK,
NOVA SCOTIA,
POINTE CLAIRE, QUEBEC
H9R 5A5
PRINCE EDWARD ISLAND,
NEWFOUNDLAND
(514) 694-6390
9-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page307
Tuesday, May 9 2006 10:46 AM
Black plate (307,1)
Customer Information and Reporting Safety Defects
Customer Assistance
Customer Assistance (Puerto Rico)
Your complete and permanent satisfaction is our business. That is why all Authorized
Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top
condition.
If you have any questions or recommendations for improvement regarding the service of
your Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take
the following steps:
qSTEP 1
Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to
address the issue. If your concern has not been resolved by the CUSTOMER RELATIONS,
SALES, SERVICE, or PARTS MANAGER, then please contact the GENERAL
MANAGER of the dealership or the OWNER.
qSTEP 2
If, after following STEP 1, you feel the need for further assistance, please contact your
area's Mazda representative (Indicated on the next page).
Please help us by providing the following information:
1. Your name, address, and telephone number
2. Year and model of vehicle
3. Vehicle Identification Number (17 digits, noted on your registration or title or located on
the upper driver's side corner of the dash)
4. Purchase date and current mileage
5. Your dealer's name and location
6. Your question(s)
9-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page308
Tuesday, May 9 2006 10:46 AM
Black plate (308,1)
Customer Information and Reporting Safety Defects
Mazda Importer/Distributors
Importer/Distributor
Distributor in Each Area
qU.S.A.
qCANADA
Mazda North American Operations
7755 Irvine Center Drive
Mazda Canada Inc.
55 Vogell Road, Richmond Hill,
Irvine, CA 92618-2922 U.S.A.
P.O. Box 19734
Irvine, CA 92623-9734 U.S.A.
TEL: 1 (800) 222-5500 (in U.S.A.)
(949) 727-1990 (outside U.S.A.)
Ontario, L4B 3K5 Canada
TEL: 1 (800) 263-4680 (in Canada)
(905) 787-7000 (outside Canada)
q
PUERTO RICO/U.S. Virgin Island
Plaza Motors Corp. (Mazda de Puerto
Rico)
P.O. Box 362722, San Juan, Puerto Rico
00936-2722
TEL: (787) 641-9300
qGUAM
Triple J Motors
157 South Marine Drive, Tamuning,
GUAM 96911 USA
P.O. Box 6066 Tamuning, Guam 96931
TEL: (671) 649-6555
qSAIPAN
Pacific International Marianas, Inc.
(d.b.a. Midway Motors)
P.O. Box 887 Saipan, MP 96950
TEL: (670) 234-7524
Triple J Saipan, Inc.
(d.b.a. Triple J Motors)
P.O. Box 500487 Saipan, MP 96950-0487
TEL: (670) 234-7133/3051
qAMERICAN SAMOA
Polynesia Motors, Inc.
P.O. Box 1120, Pago Pago, American
Samoa 96799
TEL: (684) 699-9347
9-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page309
Tuesday, May 9 2006 10:46 AM
Black plate (309,1)
Customer Information and Reporting Safety Defects
Warranty
Warranties for Your Mazda
l
l
l
l
l
New Vehicle Limited Warranty
Distributor Major Component Limited Warranty (Canada only)
Safety Restraint System Limited Warranty
Anti-perforation Limited Warranty
Federal Emission Control Warranty (U.S.A. only)
l
Emission Defect Warranty
Emission Performance Warranty
l
l
l
l
l
California Emission Control Warranty (U.S.A. only)
Emission Control Warranty (Canada only)
Replacement Parts and Accessories Limited Warranty
Tire Warranty
NOTE
Detailed warranty information is provided with your Mazda.
9-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page310
Tuesday, May 9 2006 10:46 AM
Black plate (310,1)
Customer Information and Reporting Safety Defects
Warranty
Outside the United States
Government regulations in the United States require that automobiles meet specific
emission regulations and safety standards. Therefore, vehicles built for use in the United
States may differ from those sold in other countries.
The differences may make it difficult or even impossible for your vehicle to receive
satisfactory servicing in other countries. We strongly recommend that you NOT take your
Mazda outside the United States. However, in the event that you are moving to Canada
permanently, Mazda vehicles built for use in the United States could be eligible for
exportation to Canada with specific vehicle modifications to comply with the Canadian
Motor Vehicle Safety requirements (CMVSS).
NOTE
The above is applicable for a permanent import/export situation and not related to
travelers on vacation.
You may have the following problems if you do take your vehicle outside of the United
States:
l
Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel will
affect vehicle performance and damage the emission controls and engine.
l
Proper repair facilities, tools, testing equipment, and replacement parts may not be
available.
Please refer to your Manufacturer's Warranty Booklet for more information.
9-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page311
Tuesday, May 9 2006 10:46 AM
Black plate (311,1)
Customer Information and Reporting Safety Defects
Warranty
Outside Canada
Government regulations in Canada require that automobiles meet specific emission
regulations and safety regulations. Therefore, vehicles built for use in Canada may differ
from those sold in other countries.
The differences may make it difficult or even impossible for your vehicle to receive
satisfactory servicing in other countries. We strongly recommend that you NOT take your
Mazda outside Canada. However, in the event that you are moving to the United States
permanently, Mazda vehicles built for use in Canada could be eligible for exportation to the
United States with specific vehicle modifications to comply with the United States Federal
Motor Vehicle Safety Standards (FMVSS).
NOTE
The above is applicable for a permanent import/export situation and not related to
travelers on vacation.
You may have the following problems if you do take your vehicle outside of Canada:
l
Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel will
affect vehicle performance and damage the emission controls and engine.
l
Proper repair facilities, tools, testing equipment, and replacement parts may not be
available.
Please refer to your Manufacturer's Warranty Booklet for more information.
9-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page312
Tuesday, May 9 2006 10:46 AM
Black plate (312,1)
Customer Information and Reporting Safety Defects
Warranty
Registering Your Vehicle in A Foreign Country (Except
United States and Canada)
Government regulations in your country could require that automobiles meet specific
emission and safety standards.
Vehicles built for your country may differ from those built for other countries. In addition
to registration problems, satisfactory service may be difficult or even impossible in another
country.
The fuel specified for your vehicle may be unavailable.
Parts, servicing techniques, and tools necessary to maintain and repair your vehicle may be
unavailable.
There might not be an Authorized Mazda Dealer in the country you plan to take your
vehicle.
The Mazda warranty is valid only in certain countries.
9-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page313
Tuesday, May 9 2006 10:46 AM
Black plate (313,1)
Customer Information and Reporting Safety Defects
Warranty
Add-On Non-Genuine Parts and Accessories
Non-genuine parts and accessories for Mazda vehicles can be found in stores.
These may fit your vehicle, but they are not approved by Mazda for use with Mazda
vehicles. When you install non-genuine parts or accessories, they could affect your
vehicle's performance or safety systems; the Mazda warranty doesn't cover this. Before you
install any non-genuine parts or accessories, consult an Authorized Mazda Dealer.
WARNING
Installation of Non-Genuine Parts or Accessories:
Installation of non-genuine parts or accessories is dangerous. Improperly designed
parts or accessories could seriously affect your vehicle's performance or safety
systems. This could cause you to have an accident or increase your chances of injuries
in an accident. Always consult an Authorized Mazda Dealer before you install non-
genuine parts or accessories.
Add-On Electrical and Electronic Equipment:
Incorrectly choosing or installing improper add-on equipment or choosing an
improper installer is dangerous. Essential systems could be damaged, causing engine
stalling, air-bag (SRS) activation, ABS inactivation, or a fire in the vehicle.
Be very careful in choosing and installing add-on electrical equipment, such as mobile
telephones, two-way radios, stereo systems, and car alarm systems.
Mazda assumes no responsibility for death, injury, or expenses that may result from the
installation of add-on non-genuine parts or accessories.
9-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page314
Tuesday, May 9 2006 10:46 AM
Black plate (314,1)
Customer Information and Reporting Safety Defects
Cell Phones
Cell Phones Warning
WARNING
Use of Cell Phones and Other Devices by Driver:
Use of any electrical devices such as cell phones, computers, portable radios, vehicle
navigation or other devices by the driver while the vehicle is moving is dangerous.
Dialing a number on a cell phone while driving also ties-up the driver's hands. Use of
these devices will cause the driver to be distracted and could lead to a serious accident.
If a passenger is unable to use the device, pull off the right-of-way to a safe area
before use. If use of a cell phone is necessary despite this warning, use a hands-free
system to at least leave the hands free to drive the vehicle. Never use a cell phone or
other electrical devices while the vehicle is moving and, instead, concentrate on the
full-time job of driving.
Please comply with the legal regulations concerning the use of communication
equipment in vehicles in your country.
9-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page315
Tuesday, May 9 2006 10:46 AM
Black plate (315,1)
Customer Information and Reporting Safety Defects
Type Approval of Equipment
Type Approval of Equipment
Immobilizer system
9-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page316
Tuesday, May 9 2006 10:46 AM
Black plate (316,1)
Customer Information and Reporting Safety Defects
Uniform Tire Quality Grading System (UTQGS)
Uniform Tire Quality Grading System (UTQGS)
This information relates to the tire grading system developed by the U.S. National
Highway Traffic Safety Administration for grading tires by tread wear, traction, and
temperature performance.
qTread Wear
The tread wear grade is a comparative rating based on the wear rate of the tire when tested
under controlled conditions on a specified government test course.
For example, a tire graded 150 would wear one-and-a-half times as well on the government
course as a tire graded 100.
The relative performance of tires depends upon the actual conditions of their use, however,
and may depart significantly from the norm because of variations in driving habits, service
practices and differences in road characteristics and climate.
qTraction-AA, A, B, C
The traction grades, from highest to lowest, are AA, A, B, and C. These grades represent
the tire's ability to stop on wet pavement as measured under controlled conditions on
specified government test surfaces of asphalt and concrete. A tire marked C may have poor
traction performance.
WARNING
The traction grade assigned to this tire is based on braking (straight ahead) traction
tests and does not include acceleration cornering (turning), hydroplaning, or peak
traction characteristics.
qTemperature-A, B, C
The temperature grades A (the highest), B, and C, represent the tire's resistance to the
generation of heat and its ability to dissipate heat when tested under controlled conditions
on a specified indoor laboratory test wheel.
Sustained high temperature can cause the material of the tire to degenerate and reduce tire
life, and excessive temperatures can lead to sudden tire failure.
Grade C corresponds to a level of performance which all passenger vehicle tires must meet
under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent
higher levels of performance on the laboratory test wheel than the minimum required by
law.
9-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page317
Tuesday, May 9 2006 10:46 AM
Black plate (317,1)
Customer Information and Reporting Safety Defects
Uniform Tire Quality Grading System (UTQGS)
WARNING
The temperature grade for this tire is established for a tire that is properly inflated and
not overloaded. Excessive speed, underinflation, or excessive loading, either
separately or in combination, can cause heat buildup and possible tire failure.
These grades will be added to the sidewalls of passenger vehicle tires over the next several
years according to a schedule established by the NHTSA and the tire manufacturers.
The grade of tires available as standard or optional equipment on Mazda vehicles may vary
with respect to grade.
ALL PASSENGER VEHICLE TIRES MUST CONFORM TO THESE GRADES AND
TO ALL OTHER FEDERAL TIRE-SAFETY REQUIREMENTS.
qUniform Tire Quality Grading
Quality grades can be found where applicable on the tire sidewall between tread shoulder
and maximum section width.
For example:
Treadwear 200 Traction AA Temperature A
UTQGS MARK (example)
TREADWEAR 200 TRACTION AA
TEMPERATURE A
9-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page318
Tuesday, May 9 2006 10:46 AM
Black plate (318,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Tire Labeling
Federal law requires tire manufacturers to place standardized information on the sidewall of
all tires. This information identifies and describes the fundamental characteristics of the tire
and also provides a tire identification number for safety standard certification and in case of
a recall.
qInformation on Passenger Vehicle Tires
Please refer to the diagram below.
1. TIN: U.S. DOT tire identification number
2. Passenger car tire
3. Nominal width of tire in millimeters
4. Ratio of height to width (aspect ratio)
5. Radial
6. Rim diameter code
7. Load index & speed symbol
8. Severe snow conditions
9. Tire ply composition and materials used
10. Max. load rating
9-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page319
Tuesday, May 9 2006 10:46 AM
Black plate (319,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
11. Tread wear, traction and temperature grades
12. Max. permissible inflation pressure
13. SAFETY WARNING
P215/65R15 95H is an example of a tire size and load index rating. Here is an explanation
of the various components of that tire size and load index rating. Note that the tire size and
load index rating may be different from the example.
P
Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designated
by the Tire and Rim Association (T&RA).
NOTE
If your tire size does not begin with a letter this may mean it is designated by either
ETRTO (European Tire and Rim Technical Organization) or JATMA (Japan Tire
Manufacturing Association).
215
“215” is the nominal width of the tire in millimeters. This three-digit number gives the
width in millimeters of the tire from sidewall edge to sidewall edge. In general, the larger
the number, the wider the tire.
65
“65” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.
R
“R” is the tire construction symbol. R indicates “Radial ply construction”.
15
“15” is the wheel rim diameter in inches.
95
“95” is the Load Index. This two-or three-digit number indicates how much weight each
tire can support.
9-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page320
Tuesday, May 9 2006 10:46 AM
Black plate (320,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
H
“H” is the speed rating. The speed rating denotes the maximum speed for which the use of
the tire is rated.
Letter Rating
Speed Rating
99 mph
Q
R
S
106 mph
112 mph
118 mph
124 mph
130 mph
149 mph
168* mph
186* mph
T
U
H
V
W
Y
* For tires with a maximum speed capability over 149 mph, tire manufacturers sometimes use the letters ZR. For
tires with a maximum speed capability over 186 mph, tire manufacturers always use the letters ZR.
M+S or M/S: Mud and Snow
AT: All Terrain.
AS: All Season. The “M+S” or “M/S” indicates that the tire has some functional use in
mud and snow.
U.S. DOT Tire Identification Number (TIN)
This begins with the letters “DOT” which indicates the tire meets all federal standards. The
next two numbers or letters are the plant code where it was manufactured, and the last four
numbers represent the week and year the tire was manufactured. For example, the numbers
457 means the 45st week of 1997. After 2000 the numbers go to four digits. For example,
the number 2102 means the 21th week of 2002. The other numbers are marketing codes
used at the manufacturer's discretion. This information is used to contact consumers if a tire
defect requires a recall.
Tire Ply Composition and Materials Used
The number of plies indicates the number of layers of rubber-coated fabric in the tire. In
general, the greater the number of plies, the more weight a tire can support. Tire
manufacturers also must indicate the tire materials, which include steel, nylon, polyester,
and other.
Maximum Load Rating
This number indicates the maximum load in kilograms and pounds that can be carried by
the tire.
Maximum Permissible Inflation Pressure
This number is the greatest amount of air pressure that should ever be put in the tire under
normal driving conditions.
9-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page321
Tuesday, May 9 2006 10:46 AM
Black plate (321,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Tread Wear, Traction and Temperature Grades
Tread wear: The tread wear grade is a comparative rating based on the wear rate of the tire
when tested under controlled conditions on a specified government test course. For
example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the
government course as a tire graded 100.
Traction: The traction grades, from highest to lowest are AA, A, B, and C. The grades
represent the tire's ability to stop on wet pavement as measured under controlled conditions
on specified government test surfaces of asphalt and concrete. A tire marked C may have
poor traction performance.
Temperature: The temperature grades are A (the highest), B and C, representing the tire's
resistance to the generation of heat and its ability to dissipate heat when tested under
controlled conditions on a specified indoor laboratory test wheel.
Snow Tires
In some heavy snow areas, local governments may require true snow tires, those with very
deeply cut tread. These tires should only be used in pairs or placed on all four wheels.
Make sure you purchase snow tires that are the same size and construction type as the other
tires on your vehicle.
SAFETY WARNING
The following safety warning appears on the tire's sidewall.
SERIOUS INJURY MAY RESULT FROM:
l
EXPLOSION OF TIRE/RIM ASSEMBLY DUE TO IMPROPER MOUNTING-
MATCH TIRE DIAMETER TO RIM DIAMETER; NEVER EXCEED 40 psi (275 kPa)
TO SEAT BEADS-ONLY SPECIALLY TRAINED PERSONS SHOULD MOUNT
TIRES.
l
TIRE FAILURE DUE TO UNDER-INFLATION/OVERLOADING/DAMAGE-
FOLLOW OWNER'S MANUAL AND PLACARD IN VEHICLE-FREQUENTLY
CHECK INFLATION PRESSURE AND INSPECT FOR DAMAGE.
9-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page322
Tuesday, May 9 2006 10:46 AM
Black plate (322,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
qInformation on Temporary Tires
Please refer to the diagram below.
1. Temporary tires
2. Nominal width of tire in millimeters
3. Ratio of height to width (aspect ratio)
4. Diagonal
5. Rim diameter code
T115/70D 16 is an example of a tire size and load index rating. Here is an explanation of
the various components of that tire size and load index rating. Note that the tire size and
load index rating may be different from the example.
T
Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designated
by the Tire and Rim Association (T&RA).
115
“115” is the nominal width of the tire in millimeters. This three-digit number gives the
width in millimeters of the tire from sidewall edge to sidewall edge. In general, the larger
the number, the wider the tire.
70
“70” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.
9-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page323
Tuesday, May 9 2006 10:46 AM
Black plate (323,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
D
“D” is the tire construction symbol. D indicates “diagonal ply construction”.
16
“16” is the wheel rim diameter in inches.
9-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page324
Tuesday, May 9 2006 10:46 AM
Black plate (324,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Location of the Tire Label (Placard)
You will find the tire label containing tire inflation pressure by tire size and other important
information on the driver's side B-pillar or on the edge of the driver's door frame.
SAMPLE
qRecommended Tire Inflation Pressure
On the tire label you will find the recommended tire inflation pressure in both kPa and psi
for the tires installed as original equipment on the vehicle. It is very important that the
inflation pressure of the tires on your vehicle is maintained at the recommended pressure.
You should check the tire pressure regularly to insure that the proper inflation pressure is
maintained.
Refer to Tires on page 10-6.
NOTE
Tire pressures listed on the vehicle placard or tire information label indicate the
recommended cold tire inflation pressure, measured when the tires are cold, after the
vehicle has been parked for at least 3 hours. As you drive, the temperature in the tire
warms up, increasing the tire pressure.
9-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page325
Tuesday, May 9 2006 10:46 AM
Black plate (325,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
WARNING
Tire Under-Inflation:
Driving your vehicle with under-inflated tires is dangerous.
Under-inflation is the most common cause of failures in any kind of tire and may
result in severe cracking, tread separation or “blowout”, with unexpected loss of
vehicle control and increased risk of injury. Under-inflation increases sidewall flexing
and rolling resistance, resulting in heat buildup and internal damage to the tire. It
results in unnecessary tire stress, irregular wear, loss of control and accidents. A tire
can lose up to half of its air pressure and not appear to be flat!
It is impossible to determine whether or not tires are properly inflated just by looking
at them.
Always check the tire inflation pressures on a regular basis according to the
recommended tire inflation pressure on the tire label and in conjunction with the
information in this owner's manual.
qChecking Tire Pressure
1. When you check the air pressure, make sure the tires are cold ―meaning they are not
hot from driving even a mile.
2. Remove the cap from the valve on one tire.
3. Firmly press a tire gauge onto the valve.
4. Add air to achieve recommended air pressure.
5. If you overfill the tire, release air by pushing on the metal stem in the center of the
valve. Then recheck the pressure with your tire gauge.
6. Replace the valve cap.
7. Repeat with each tire, including the spare.
NOTE
Some spare tires require higher inflation pressure.
8. Visually inspect the tires to make sure there are no nails or other objects embedded that
could poke a hole in the tire and cause an air leak.
9. Check the sidewalls to make sure there are no gouges, cuts, bulges, cracks or other
irregularities.
9-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page326
Tuesday, May 9 2006 10:46 AM
Black plate (326,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
NOTE
Warm tires normally exceed recommended pressures. Don't release air from warm tires
to adjust the pressure.
Under-inflation can cause serious failures and accidents.
Over-inflation can produce a harsh ride and the greater possibility of damage from road
hazards.
qGlossary of Terms
Tire Placard: A label indicating the OE tire sizes, recommended inflation pressure, and
the maximum weight the vehicle can carry.
Tire Identification Number (TIN): A number on the sidewall of each tire providing
information about the tire brand and manufacturing plant, tire size, and date of
manufacture.
Inflation Pressure: A measure of the amount of air in a tire.
kPa: Kilopascal, the metric unit for air pressure.
psi: Pounds per square inch, the English unit for air pressure.
B-pillar: The structural member at the side of the vehicle behind the front door.
Original Equipment (OE): Describes components originally equipped on the vehicle.
Vehicle Load Limit: The maximum value of the combination weight of occupants and
cargo.
Bead Area of the Tire: Area of the tire next to the rim.
Sidewall Area of the Tire: Area between the bead area and the tread.
Tread Area of the Tire: Area on the perimeter of the tire that contacts the road when it's
mounted on the vehicle.
Seating capacity means the total allowable number of vehicle occupants. Seating capacity
is described on the tire label.
Production options weight is the combination weight of installed regular production
options weighing over 2.3 kilograms in excess of the standard items which they replace,
and not previously considered in the curb weight or accessory weight, including heavy
duty brakes, ride levelers, roof rack, heavy duty battery, and special trim.
Rim is the metal support (wheel) for a tire or a tire and tube assembly upon which the tire
beads are seated.
9-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page327
Tuesday, May 9 2006 10:46 AM
Black plate (327,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Tire Maintenance
Improper or inadequate vehicle maintenance can cause tires to wear abnormally. Here are
some important maintenance points:
qTire Inflation Pressure
Inspect all tire pressure monthly (including the spare) when the tires are cold. Maintain
recommended pressures for the best ride, top handling, and minimum tire wear. Use the
pressures specified on the vehicle tire information placard or tire label for optimum service.
qTire Rotation
To equalize tread wear, rotate the tires every 12,000 km (7,500 miles) or sooner if irregular
wear develops. During rotation, inspect them for correct balance.
Forward
Inspect the tires for uneven wear and damage. Abnormal wear is usually caused by one or a
combination of the following:
l
Incorrect tire pressure
l
Improper wheel alignment
l
Out-of-balance wheel
l
Severe braking
for tightness.
9-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page328
Tuesday, May 9 2006 10:46 AM
Black plate (328,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
CAUTION
Rotate unidirectional tires and radial tires that have an asymmetrical tread pattern or
studs only from front to rear, not from side to side. Tire performance will be weakened if
rotated from side to side.
Don't use the following:
l
Tires not of the designated size
l
Tires of different sizes or types at the same time
l
Tires not sufficiently inflated
If these instructions aren't followed, the rotation of the left and right wheels will be
different and will thus apply a constant load on the limited-slip differential.
This will cause a malfunction.
qReplacing a Tire
WARNING
Worn Tires:
Driving with worn tires is dangerous. Reduced braking, steering, and traction could
result in an accident. Always use tires that are in good condition.
If a tire wears evenly, a wear indicator will appear as a solid band across the tread. Replace
the tire when this happens.
Tread wear indicator
New tread
Worn tread
You should replace it before the band is across the entire tread.
9-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page329
Tuesday, May 9 2006 10:46 AM
Black plate (329,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
NOTE
Tires degrade over time, even when they are not being used on the road. It is
recommended that tires generally be replaced when they are 6 years or older. Heat
caused by hot climates or frequent high loading conditions can accelerate the aging
process. You should replace the spare tire when you replace the other road tires due to
the aging of the spare tire. Regarding the manufacturing week and year is indicated with
4 digit. Refer to The tire labeling on page 9-18.
qSafety Practices
The way you drive has a great deal to do with your tire mileage and safety. So cultivate
good driving habits for your own benefit.
l
Observe posted speed limits
l
Avoid fast starts, stops and turns
l
Avoid potholes and objects on the road
l
Do no run over curbs or hit the tire against the curb when parking
CAUTION
If you feel a sudden vibration or ride disturbance while driving or you suspect your tire
or vehicle has been damaged, immediately reduce your speed. Drive with caution until
you can safely pull off the road. Stop and inspect the tire for damage. If the tire is under-
inflated or damaged, deflate it, remove the tire and rim and replace it with your spare
tire. If you cannot detect a cause, have the vehicle towed to the nearest vehicle or tire
dealer to have the vehicle inspected.
9-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page330
Tuesday, May 9 2006 10:46 AM
Black plate (330,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Vehicle Loading
WARNING
Do not taw a trailer with this vehicle:
Towing a trailer with this vehicle is dangerous because it has not been designed to tow
a trailer and doing so will affect the drive system which could result in vehicle
damage.
This section will guide you in the proper loading of your vehicle and/or trailer, to keep
your loaded vehicle weight within its design rating capability, with or without a trailer.
Properly loading your vehicle will provide maximum return of vehicle design performance.
Before loading your vehicle, familiarize yourself with the following terms for determining
your vehicle's weight ratings, with or without a trailer, from the vehicle's Safety
Certification Label and Tire and Load Information Label:
WARNING
Overloaded Vehicle:
Overloading a vehicle is dangerous. The results of overloading can have serious
consequences in terms of passenger safety. Too much weight on a vehicle's suspension
system can cause spring or shock absorber failure, brake failure, handling or steering
problems, irregular tire wear, tire failure or other damage.
Overloading makes a vehicle harder to drive and control. It also increases the distance
required for stopping. In cases of serious overloading, brakes can fail completely,
particularly on steep grades. The load a tire will carry safely is a combination of the
size of the tire, its load range, and corresponding inflation pressure.
Never overload the vehicle and always observe the vehicle's weight ratings from the
vehicle's Safety Certification and Tire and Load Information labels.
9-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page331
Tuesday, May 9 2006 10:46 AM
Black plate (331,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Base Curb Weight is the weight of the vehicle including a full tank of fuel and all
standard equipment. It does not include passengers, cargo, or optional equipment.
Vehicle Curb Weight is the weight of your new vehicle when you picked it up from your
dealer plus any aftermarket equipment.
PAYLOAD
Payload is the combination weight of cargo and passengers that the vehicle is designed to
carry. The maximum payload for your vehicle can be found on the Tire and Load
Information label on the driver's door frame or door pillar. Look for “THE
COMBINATION WEIGHT OF OCCUPANTS AND CARGO SHOULD NEVER
EXCEED XXX kg or XXX lbs” for your maximum payload. The payload listed on the tire
label is the maximum payload for the vehicle as built by the assembly plant. If any
aftermarket or dealer installed equipment has been installed on the vehicle, the weight of
the equipment must be subtracted from the payload listed on the tire label in order to be
accurate.
9-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page332
Tuesday, May 9 2006 10:46 AM
Black plate (332,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
SAMPLE
CARGO
Cargo Weight includes all weight added to the Base Curb Weight, including cargo and
optional equipment. When towing, trailer tongue load or king pin weight is also part of
cargo weight.
The cargo weight limit decreases depending on the number of vehicle occupants. The cargo
weight limit can be calculated by subtracting the total weight of the vehicle occupants from
the “combination weight of occupants and cargo should never exceed” value on the tire
label.
9-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page333
Tuesday, May 9 2006 10:46 AM
Black plate (333,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Examples: Based on a single occupant weight of 68 kg, and a value of 385 kg for the
“combination weight of occupants and cargo should never exceed”:
_
_
The cargo weight limit with one occupant is 385 kg 68 kg = 317 kg
The cargo weight limit with two occupants is 385 kg (68 × 2) kg = 249 kg
If the weight of the occupant increases, the cargo weight limit decreases by that much.
GAW (Gross Axle Weight) is the total weight placed on each axle (front and rear) -
including vehicle curb weight and all payload.
GAWR (Gross Axle Weight Rating) is the maximum allowable weight that can be carried
by a single axle (front or rear). These numbers are shown on the Safety Compliance
Certification Label located on the driver's door frame or door pillar. The total load on
each axle must never exceed its GAWR.
GVW
GVW (Gross Vehicle Weight) is the Vehicle Curb Weight + cargo + passengers.
GVWR (Gross Vehicle Weight Rating) is the maximum allowable weight of the fully
loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is
shown on the Safety Compliance Certification Label located on the driver's door
frame or door pillar. The GVW must never exceed the GVWR.
9-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page334
Tuesday, May 9 2006 10:46 AM
Black plate (334,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
SAMPLE
WARNING
Exceeding Axle Weight Rating Limits:
Exceeding the Safety Certification Label axle weight rating limits is dangerous and
could result in death or serious injury as a result of substandard vehicle handling,
performance, engine, transmission and/or structural damage, serious damage to the
vehicle, or loss of control.
Always keep the vehicle within the axle weight rating limits.
Do not taw a trailer with this vehicle:
Towing a trailer with this vehicle is dangerous because it has not been designed to tow
a trailer and doing so will affect the drive system which could result in vehicle
damage.
9-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page335
Tuesday, May 9 2006 10:46 AM
Black plate (335,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
GCW
GCW (Gross Combination Weight) is the weight of the loaded vehicle (GVW) plus the
weight of the fully loaded trailer.
GCWR (Gross Combination Weight Rating) is the maximum allowable weight of the
vehicle and the loaded trailer - including all cargo and passengers - that the vehicle can
handle without risking damage. (Important: The towing vehicle's braking system is rated
for operation at GVWR, not at GCWR. Separate functional brakes should be used for safe
control of towed vehicles and for trailers weighing more than 1,500 lbs). The GCW must
never exceed the GCWR.
Maximum Loaded Trailer Weight is the highest possible weight of a fully loaded trailer
the vehicle can tow. It assumes a vehicle with only mandatory options, no cargo (internal or
_
_
external), a tongue load of 10 15% (conventional trailer) or king pin weight of 15 25%
(fifth-wheel trailer), and driver only (150 lbs). Consult your dealership (or the RV and
Trailer Towing Guide provided by your dealership) for more detailed information.
Tongue Load or Fifth-Wheel King Pin Weight refers to the amount of the weight that a
trailer pushes down on a trailer hitch.
Examples: For a 5000 lb conventional trailer, multiply 5000 by 0.10 and 0.15 to obtain a
proper tongue load range of 500 to 750 lbs. For an 11,500 lb fifth-wheel trailer, multiply by
0.15 and 0.25 to obtain a proper king pin load range of 1,725 to 2,875 lbs.
9-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page336
Tuesday, May 9 2006 10:46 AM
Black plate (336,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
WARNING
Exceeding GVWR or GAWR Specifications:
Exceeding the GVWR or the GAWR specified on the certification label is dangerous.
Exceeding any vehicle rating limitation could result in a serious accident, injury, or
damage to the vehicle.
Do not use replacement tires with lower load carrying capacities than the originals
because they may lower the vehicle's GVWR and GAWR limitations. Replacement
tires with a higher limit than the originals do not increase the GVWR and GAWR
limitations.
Never exceed the GVWR or the GAWR specified on the certification label.
9-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page337
Tuesday, May 9 2006 10:46 AM
Black plate (337,1)
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
Steps for Determining the Correct Load Limit:
Steps for Determining Correct Load Limit:
(1) Locate the statement “The combination weight of occupants and cargo should never
exceed XXX kg or XXX lbs” on your vehicle's placard.
(2) Determine the combination weight of the driver and passengers that will be riding in
your vehicle.
(3) Subtract the combination weight of the driver and passengers from XXX kg or XXX
lbs.
(4) The resulting figure equals the available amount of cargo and luggage load capacity.
For example, if the “XXX” amount equals 1400 lbs. and there will be five 150 lb
passengers in your vehicle, the amount of available cargo and luggage load capacity is
_
650 lbs. (1400 750 (5 × 150) = 650 lbs.)
(5) Determine the combination weight of luggage and cargo being loaded on the vehicle.
That weight may not safely exceed the available cargo and luggage load capacity
calculated in Step 4.
(6) If your vehicle will be towing a trailer, the load from your trailer will be transferred to
your vehicle. Consult this manual to determine how this reduces the available cargo
and luggage load capacity of your vehicle.
9-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page338
Tuesday, May 9 2006 10:46 AM
Black plate (338,1)
Customer Information and Reporting Safety Defects
Reporting Safety Defects
Reporting Safety Defects (U.S.A.)
If you believe that your vehicle has a defect which could cause a crash or could
cause injury or death, you should immediately inform the National Highway
Traffic Safety Administration (NHTSA) in addition to notifying Mazda Motor
Corporation (Your Mazda Importer/Distributor).
If NHTSA receives similar complaints, it may open an investigation, and if it
finds that a safety defect exists in a group of vehicles, it may order a recall and
remedy campaign. However, NHTSA cannot become involved in individual
problems between you, your dealer, or Mazda Motor Corporation (Your Mazda
Importer/Distributor).
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-
327-4236 (TTY: 1-800-424-9153) ; go to http://www.safercar.gov; or write to:
Administrator, NHTSA, 400 Seventh Street, SW., Washington, DC 20590. You
can also obtain other information about motor vehicle safety from http://
www.safercar.gov.
NOTE
If you live in the U.S.A., all correspondence to Mazda Motor Corporation should be
forwarded to:
Mazda North American Operations
7755 Irvine Center Drive
Irvine, California 92618-2922
P.O. Box 19734
Irvine, CA 92623-9734
Customer Assistance Center or toll free at 1 (800) 222-5500
If you live outside of the U.S.A., please contact the nearest Mazda Distributor shown
9-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page339
Tuesday, May 9 2006 10:46 AM
Black plate (339,1)
Customer Information and Reporting Safety Defects
Reporting Safety Defects
Reporting Safety Defects (Canada)
Canadian customers who wish to report a safety-related defect to Transport Canada, Defect
Investigations and Recalls, may telephone the toll free hotline 1-800-333-0510, or contact
Transport Canada by mail at: Transport Canada, ASFAD, Place de Ville Tower C, 330
Sparks Street, Ottawa ON K1A 0N5.
For additional road safety information, please visit the Road Safety website at:
http://www.tc.gc.ca/roadsafety/menu.htm
9-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page340
Tuesday, May 9 2006 10:46 AM
Black plate (340,1)
Customer Information and Reporting Safety Defects
Service Publications
Service Publications
Factory-authorized Mazda service publications are available for owners who wish to do
some of their own maintenance and repair.
When requesting any of our publications through an Authorized Mazda Dealer, refer to the
chart below.
If they don't have what you need in stock, they can order it for you.
PUBLICATION ORDER NUMBER
9999-95-063B-07
PUBLICATION DESCRIPTION
2007 WORKSHOP MANUAL (English)
2007 WIRING DIAGRAM (English)
2007 OWNER'S MANUAL
9999-95-039G-07
9999-95-MS6C-07 (U.S.A. only)
9999-EC-MS6C-07 (Canada only)
9999-PR-MS6C-07 (Puerto Rico only)
2007 OWNER'S MANUAL
2007 OWNER'S MANUAL
qWORKSHOP MANUAL:
Covers recommended maintenance and repair procedures of the drive train, body and
chassis.
qWIRING DIAGRAM:
Provides electrical schematics as well as component location for the entire electrical
system.
qOWNER'S MANUAL:
This booklet contains information regarding the proper care and operation of your vehicle.
This is not a technician's manual.
9-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page342
Tuesday, May 9 2006 10:46 AM
Black plate (342,1)
Identification Numbers
qVehicle Emission Control
Vehicle Information Labels
Information Label
qVehicle Identification Number
The vehicle identification number legally
identifies your vehicle. The number is on
a plate attached to the cowl panel located
on the left corner of the dashboard. This
plate can easily be seen through the
windshield.
q
Motor Vehicle Safety Standard Label
10-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page343
Tuesday, May 9 2006 10:46 AM
Black plate (343,1)
Identification Numbers
qTire Pressure Label
qEngine Number
Forward
10-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page344
Tuesday, May 9 2006 10:46 AM
Black plate (344,1)
Specifications
Specifications
qEngine
Item
Specification
Type
DOHC-16V in-line, 4-cylinder
87.5 × 94.0 mm (3.44 × 3.70 in)
2,261 ml (2,261 cc, 137.9 cu in)
9.5
Bore×Stroke
Displacement
Compression ratio
qElectrical System
Item
Classification
12V-48AH/5HR
Battery
12V-55AH/5HR
L3K9 18 110A*1
Spark-plug number
L3Y3 18 110
Spark-plug gap
*1 ex factory
0.70―0.80 mm (0.028―0.031 in)
CAUTION
When cleaning the iridium plugs, do not use a wire brush. The fine particulate coating on
the iridium alloy and platinum tips could be damaged.
qLubricant Quality
Lubricant
Classification
Refer to the recommended SAE viscosity numbers on
page 8-13.
Engine oil
Manual transaxle oil
Transfer case oil
API Service GL-4 (SAE 75W-90)
API Service GL-5 (SAE 80W-90)
Rear differential oil
Power steering fluid
Brake/Clutch fluid
API Service GL-5 (SAE 80W-90)
ATF M-III, M-V, or equivalent (e.g. Dexron® II)
SAE J1703, or FMVSS116 DOT-3
10-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page345
Tuesday, May 9 2006 10:46 AM
Black plate (345,1)
Specifications
qCapacities
(Approximate Quantities)
Item
Capacity
With oil filter replacement
5.7 L (6.0 US qt, 5.0 Imp qt)
Engine oil
Without oil filter
replacement
5.3 L (5.6 US qt, 4.7 Imp qt)
Coolant
8.0 L (8.5 US qt, 7.0 Imp qt)
2.5 L (2.6 US qt, 2.2 Imp qt)
1.2 L (1.3 US qt, 1.1 Imp qt)
1.0 L (1.1 US qt, 0.9 Imp qt)
60 L (15.9 US gal, 13.2 Imp gal)
Manual transaxle oil
Transfer case oil
Rear differential oil
Fuel tank
Check oil and fluid levels with dipsticks or reservoir gauges.
qDimensions
Item
Model
Without license plate holder
Overall length
4,745 mm (186.8 in)
4,765 mm (187.6 in)
1,780 mm (70.1 in)
1,430 mm (56.3 in)
1,540 mm (60.6 in)
1,540 mm (60.6 in)
2,675 mm (105.3 in)
With license plate holder
Overall width
Overall height
Front tread
Rear tread
Wheelbase
qWeights
Item
Weight
GVWR (Gross Vehicle Weight Rating)
2,065 kg (4,552 lb)
1,111 kg (2,449 lb)
954 kg (2,103 lb)
1,641 kg (3,618 lb)
Front
GAWR (Gross Axle Weight Rating)
Rear
CW (Curb Weight)
qAir Conditioner
Gas complies with SAE J639
Maximum operating charge
HFC134a (R-134a)
0.47 kg (1.0 lb)
10-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page346
Tuesday, May 9 2006 10:46 AM
Black plate (346,1)
Specifications
qLight Bulbs
Exterior light
Category
Light bulb
Wattage
ECE R (SAE)
H1 (―)
High beam
55
35
27
5
Headlights
Low beam
D2S (―)
Front turn signal lights
Parking lights
― (#2357A)
W5W (―)
Fog lights
55
5
H11 (H11)
Side-marker lights
High-mount brake light*2
Rear turn signal lights
Brake lights/Taillights
Taillights
― (―)
4
― (―)
21
21/5
5*1
18.4
5
WY21W (―)
W21/5W (#7443)
W21/5W (#7443)
W16W (#921)
W5W (―)
Reverse lights
License plate lights
*1 Use a 21/5W type bulb.
*2 Bulb replacement is not possible because it is built into the unit. Replace the unit.
Interior light
Category
Light bulb
Wattage
ECE R
―
Trunk light
3
5
Overhead light/Map lights
Courtesy lights
W5W
W5W
―
5
Vanity mirror lights
1.2
qTires
NOTE
The tires have been optimally matched with the chassis of your vehicle.
When replacing tires, Mazda recommends that you replace tires of the same type
originally fitted to your vehicle. For details, contact an Authorized Mazda Dealer.
Check the tire pressure label for tire size and inflation pressure. Refer to Tire Inflation
Pressure on page 8-24.
Standard tire
Inflation pressure
Tire size
Front
Rear
215/45R18 93Y
260 kPa (38 psi)
260 kPa (38 psi)
10-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page347
Tuesday, May 9 2006 10:46 AM
Black plate (347,1)
Specifications
Temporary spare tire
Tire size
Inflation pressure
420 kPa (60 psi)
T145/70D17 106M
qFuses
Refer to the fuse rating on page 8-34.
10-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page348
Tuesday, May 9 2006 10:46 AM
Black plate (348,1)
10-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page350
Tuesday, May 9 2006 10:46 AM
Black plate (350,1)
Index
A
B
Advanced Key
Brake/Clutch
Brakes
C
Child Restraint
B
Battery
Beep sounds
11-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page351
Tuesday, May 9 2006 10:46 AM
Black plate (351,1)
Index
D
E
Defroster
F
Flasher
Fluids
Fuel
E
Engine
Engine Coolant
G
H
11-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page352
Tuesday, May 9 2006 10:46 AM
Black plate (352,1)
Index
H
J
Headlights
K
L
Light Bulbs
I
Ignition
M
Maintenance
Mirrors
O
11-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page353
Tuesday, May 9 2006 10:46 AM
Black plate (353,1)
Index
O
S
Seat Belt System
P
Seats
R
Security System
SRS Air Bags
S
11-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page354
Tuesday, May 9 2006 10:46 AM
Black plate (354,1)
Index
S
T
V
T
W
Tiedown
Warning Light
Windows
Tires
Towing
11-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page355
Tuesday, May 9 2006 10:46 AM
Black plate (355,1)
Index
W
11-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
Mazdaspeed6_8V77-EA-06F_Edition1 Page356
Tuesday, May 9 2006 10:46 AM
Black plate (356,1)
11-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Form No.8V77-EA-06F
MAZDASPEED6_NAVI_EA.book Page 1 Wednesday, May 10, 2006 4:29 PM
Preparation
See page
NAVIGATION
SYSTEM
Before Use
for specific information.
4
Getting
started
Immediate use
4
See page
for specific information.
Routing
Address
Book
Advanced use
See page
5
for specific information.
Navigation
Set Up
If
necessary
If necessary
See page
5
for specific information.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 2 Wednesday, May 10, 2006 4:29 PM
Accessories
Please contact an Authorized Mazda Dealer if you are missing the
following accessory.
lMap Disc
CAUTION:
THIS PRODUCT IS A CLASS I LASER PRODUCT.
HOWEVER THIS PRODUCT USES A VISIBLE/
INVISIBLE LASER BEAM WHICH COULD CAUSE
HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THIS PRODUCT
CORRECTLY AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE. DO NOT
OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
Laser products:
Wave length: 650 nm
Laser power: No hazardous radiation is emitted with safety protection.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 3 Wednesday, May 10, 2006 4:29 PM
MEMO
3
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 4 Wednesday, May 10, 2006 4:29 PM
Contents
Preparation
n Before Use
Accessories........................................................................................ 2
Laser products: .................................................................................. 2
Contents............................................................................................. 4
Safety Information .............................................................................. 6
Introduction ........................................................................................ 8
(Use This Product Safety), (Navigation System), (Screens)
Names and Functions ...................................................................... 10
Immediate use
n Getting started
l Activation....................................................................................... 12
(Removing the Map Disc), (Buttons on the screen)
l Screen Names and Functions....................................................... 14
(Screens Before Setting Route), (Screens During Route Guidance),
(Menu), (Screen adjustments and settings)
l Screen change.............................................................................. 16
(Changing the Map Orientation/Scale)
n Routing
l Destination Entry and Route Search............................................. 18
(Change (Change Search Area)), (Address), (Point of interest),
(Emergency), (Memory Point), (Home), (Preset Destination),
(Previous Destination), (Intersection), (Freeway On/Off Ramp),
(Coordinates), (Select from map)
l Quick POI...................................................................................... 26
(Displaying POI(s) on a Map), (Local Search), (Deleting POI Markers),
(Showing POI Data)
l Character Entry............................................................................. 27
(To enter the street name, city name, and other.),
(To enter the house phone number, and other.)
l Direct Destination Input................................................................. 28
(Direct Destination Input), (Selecting Route)
l POI Icons on Maps / Delete Destination....................................... 29
(POI (Point of Interest) Icons), (Delete destination)
l Route Options............................................................................... 30
(Route Preferences), (Modification of Destination or Way Point Positions),
(Deletion of Destination or Way Points), (Detour), (Turn List),
(Display Preview), (Route Preview)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 5 Wednesday, May 10, 2006 4:29 PM
Advanced use
n Address Book
l Address Book................................................................................34
(Memory Point Storage), (Memory Point Confirmation and Modification),
(Preset Destinations or Home storage), (Memory Point Deletion), (All Memory
Point Deletion), (Displays Icons at Memory Points), (Avoid Area Storage),
(Avoid Area Confirmation and Modification), (Avoid Area Deletion),
(All Avoid Area Deletion), (Category Name Modification), (Previous
Destination Deletion), (All Preset Destination Deletion)
n Navigation Set Up
l Volume Adjustment........................................................................38
l Navigation Set Up..........................................................................40
(User Setting), (Quick POI Selection), (Calibration), (Restore System
Defaults), (Language), (Map Configuration)
If necessary
n If necessary
l Precautions/System Performance.................................................49
(Voice Guidance), (GPS), (Map Matching), (Positioning Accuracy),
(Route Guide), (Route Search)
l Troubleshooting .............................................................................53
(Verification First), (Error Messages)
l Maintenance..................................................................................56
(Care of the Product), (Handling and Care of Map Discs)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 6 Wednesday, May 10, 2006 4:29 PM
Safety Information
n Read this owner’s manual for your Navigation System carefully before using the system.
It contains instructions about how to use the system in a safe and effective manner.
Mazda assumes no responsibility for any problems resulting from failure to observe the instructions
given in this manual.
n This manual uses pictographs to show you how to use the product safely and to alert you to potential
dangers resulting from improper connections and operation. The meanings of the pictographs are
explained below. It is important that you fully understand the pictographs and explanations in order to
use this manual and the system properly.
The presence of this Warning symbol in the text is intended to
alert you to the importance of heeding the operation
Warning
instructions. Failure to heed the instructions may result in
Warning
severe injury or death.
n Do not keep your eyes fixed on the monitor screen or operate the system
while driving.
Do not change the settings and destination locations while driving. Minimize the time
spent on viewing the monitor screen and listening to the voice guidance while driving.
Operating the system will distract the driver from looking ahead of the vehicle and can
cause accidents. Always stop the vehicle in a safe location and use the parking brake
before operating the system.
Warnings
n Always obey local traffic regulations.
Your guided route may include roads that are not open to vehicles or are closed due to
traffic regulations. Comply with the local traffic regulations and take another route.
n Do not use the unit when it is out of order.
If the unit is out of order (no image, no sound) or in an abnormal state (has foreign matter
in it, is exposed to water, is smoking, or smells), then turn it off immediately and consult
with an Expert dealer, we recommend an Authorized Mazda Dealer. Using the unit in an
out-of-order condition may lead to accidents, fires, or electric shocks.
n Use the proper power supply.
This product is designed for operation with a negative grounded 12 V DC battery system.
n Do not disassemble.
Do not disassemble the product or attempt to repair it yourself. If the product needs to be
repaired, take it to an Expert dealer, we recommend an Authorized Mazda Dealer.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 7 Wednesday, May 10, 2006 4:29 PM
The presence of this Caution symbol in the text is intended to
alert you to the importance of heeding the operation
instructions. Failure to heed the instructions may result in injury
or material damage.
Caution
Caution
Cautions
n Do not use the product where it is exposed to water, moisture, or dust.
Exposure to water, moisture, or dust may lead to smoke, fire, or other damage to the unit.
Make especially sure that the unit does not get wet in car washes or on rainy days.
n Keep the voice guidance volume at an appropriate level.
Keep the volume level low enough to be aware of road and traffic conditions while driving.
n Protect the Deck Mechanism.
Do not insert any foreign objects into the slot of this unit.
n This navigation system is designed exclusively for use in automobiles.
This navigation system should only be installed in an automobile. Do not install it in a
ship, aircraft, or any other vehicles except an automobile. Do not use it detached from the
vehicle.
n Do not insert or allow your hand or fingers to be caught in the unit.
To prevent injury, do not get your hand or fingers caught in moving parts or in the disc
slot. Especially watch out for infants.
Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired operation of the device.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 8 Wednesday, May 10, 2006 4:29 PM
Introduction
Use This Product Safety
n Extremely low or high temperatures may interfere with normal operation
The inside of the vehicle can become very hot or cold when it is parked for extended
periods in direct sunlight or in cold places with the engine turned off. The navigation system
may not operate normally under such circumstances. Turn off the navigation system until
the inside of the vehicle has cooled down or warmed up. If the system does not operate
thereafter, consult an Authorized Dealer, we recommend an Authorized Mazda Dealer.
Navigation System
This navigation system utilizes GPS* satellite signals, a speed sensor and gyrosensor to track
and display your vehicle’s current position, and to guide you from your starting point to your
destination along a calculated route.
* : GPS (Global Positioning System) is a position detecting system utilizing the signals from GPS satellites
deployed by the U.S. Defense Department.
Screens
Screens displayed in this manual may differ from those on the actual display.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 9 Wednesday, May 10, 2006 4:29 PM
MEMO
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 10 Wednesday, May 10, 2006 4:29 PM
Names and Functions
Infrared transmitter
P
D
POS
Joystick
lSelects items
ENTER
by tilting it up, down, right, and left.
lScrolls map.
ZOOM key
E
ENTER
MENU
Changes the map scale.
l
l
ZOOM
RET
(
page 16)
RET key
Returns to the previous screen.
M
S
(
VOICE key
lInitiates vocal guidance for route
manoeuvres.
VOICE
lAdjusts screen quality.
(
page 15)
lTo remove the remote control from the cradle press
PUSH
lWhen placing the remote control back in the cradle, press it until you hear it engage.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 11 Wednesday, May 10, 2006 4:29 PM
d transmitter
Battery Inserting
À Open the
battery
compartment
cover.
POS (Position) key
Displays your current position.
POS
Á Insert the
new
batteries.
ENTER key
ENTER
MENU
lExecutes a selected item.
lDisplays pop up menu.
Note
MENU key
Select a menu.
Match the polarity of the batteries
with the
battery case.
and
marks in the
(
page 15)
 Close the
battery
compartment
cover.
l
Battery: Two AA batteries (R6PU)
lBattery life: Approximately 5
months of normal use (when
using manganese batteries at
ambient temperatures)
lBattery replacement: Replace
the batteries as soon as possible
when the infrared receiver does
not respond properly to remote
control operations, or when the
remote control does not work.
Note
Make sure that there is not any
pressure applied to any of the
remote control buttons when
placing the remote control in the
console box. Pressure on any of
the buttons will drain the batteries.
t engage.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 12 Wednesday, May 10, 2006 4:29 PM
Activation
Insert the map disc into the unit to start the Mobile Navigation System.
n Map Disc
l Refer to “Handling and Care of Map Discs” to know how to handle a map
Cautions
disc (
page 56).
Note
lThe map disc cannot be inserted or ejected while the ignition switch is in the OFF position.
lRemember that the battery can run down if the ignition switch is kept in the ON or ACC
position for a long time while the engine not running.
Turn the ignition switch
Note
to the ON position and
1
TILT
l
This display angle can be adjusted by pressing
.
press
to open
OPEN/CLOSE
the display.
TILT
When the
is
pressed, the display
angle changes in
stages.
lPress
to close the display.
OPEN/CLOSE
Insert the map disc
with the printed side
facing up.
Note
2
lThe main unit is located under the luggage
compartment cover.
lCondensation may form on the optical lens or the
map disc inside the unit when the temperature in
the vehicle increases in a short time such as when
heating the car on a cold day. This condensation
may cause malfunctions. If so, unload the map disc
and do not operate the unit for approximately 1
hour. Wipe the condensation off the map disc with a
soft cloth.
If the unit does not operate correctly after 1 hour,
consult an Authorized Mazda Dealer.
(CAUTION) screen
12
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 13 Wednesday, May 10, 2006 4:29 PM
Read CAUTION
carefully, and select
Most functions are inhibited while the
3
vehicle is in motion.
and press
Please read the handbook for operation
instructions.
Always obey traffic regulations.
Caution
.
ENTER
lThe Current Position screen appears.
Note
ENTER
and press . You can also change the
page 47)
lYou can select the language by select
selected language using Language Selection. (
lThe CAUTION screen remains on the display unless you select
and press
.
ENTER
Removing the Map Disc
When the ignition switch is in the ACC position and press
(EJECT).
Do not get your hand or fingers caught in
moving parts or in the disc slot. This can
cause injuries. Children are inquisitive, try
to install or remove the map disc without
infants looking on.
Caution
EJECT
Buttons on the screen
ENTER
Select the buttons by using Joystick and press
Colors for unavailable buttons will be pale.
.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 14 Wednesday, May 10, 2006 4:29 PM
Screen Names and Functions
Screens Before Setting Route
(1)
(2)
(3)
(4)
ENTER
ENTER
Current position screen
RET
RET
Returns after a
few seconds.
(6)
(5)
(8)
(7) (9)
(1) Map Orientation control
page 16)
(7) Set Destination button
(
The destination, memory point or way point
(2) GPS (Global Positioning System) marker
will be set at the position pointed by
scroll screen.
in the
(
page 50)
(3) Clock
(8) Store Memory Point button
Stores markers on the map.
(9) POI (Point of Interest) Display button
Clock will be displayed when you set up
Clock on Navigation Set Up On.
(4) Vehicle marker
(
page 26)
Shows the current position and
direction of your vehicle.
(5) Scale display
Displays the scale of the map.
(6) Distance from current position
Displays the distance from the current
position to the position pointed by
.
Screens During Route Guidance
(3)
ENTER
(2)
(1)
RET
Returns after a
few seconds.
(5)
(4)
(1) Distance and Time to Destination display (3) Turn Arrow display
Displays the time* and distance to the
destination or way point.
Shows the direction to turn at the next
junction and the distance to the junction.
(4) Route Preferences button
Selecting this will display the next and
further information on the way point or
time and distance to the destination.
(* Either required time or estimated time
arrival)
(
page 30)
(5) Current Road Name
Shows the name of the road you are
currently driving on.
(2) Route display
Shows the provided route as a thick
blue line.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 15 Wednesday, May 10, 2006 4:29 PM
Menu
Menu appears when pressing
.
MENU
Destination Entry and Route Search (
page 18)
Address Book (
Cancel Guidance (
Route Options (
page 34)
page 29)
page 30)
Volume (
page 38)
Navigation Set Up (
page 40)
Screen adjustments and settings
Display Menu screen will be shown when you press
(DISP) and hold.
VOICE
Note
Display Menu screen will be disappeared when they have been unused during a few seconds.
n Adjusting the screen quality
lAdjusts the screen brightness
Select "ADJ", and then "BRIGHT". The screen will brighten when scrolling to the right, or
darken when scrolling to the left.
lAdjusts the screen contrast
Select "ADJ", and then "CONTRAST". The screen will lighten when scrolling to the right, or
deepen when scrolling to the left.
Note
lAdjust by scrolling the Joystick to the right and left.
ENTER
lRestore the adjustment value to the default when selecting “RESET”, press
.
n Clearing the screen
ENTER
Select “DISP OFF”, press
and the screen will disappear.
The screen will appear again when pressing any buttons.
n Daytime screen/Night screen
When the headlights are on, daytime mode can also be selected (if extra screen certain
nighttime conditions). This selection can only be done when the headlights are on. Press
to switch between day and night modes.
ENTER
lThe screen can be returned to the daytime screen while the headlights or running lights
are on using the dashboard illumination switch in the dashboard (Black-out meter).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 16 Wednesday, May 10, 2006 4:29 PM
Changing the Map Orientation/Scale
Screen change
n Do not keep your eyes fixed on the monitor screen or operate the system
while driving
Do not change the settings and destination locations while driving. Minimize the time
spent viewing the monitor screen and listening to the voice guidance while driving.
Operating the system will distract the driver from looking ahead of the vehicle and may
cause an accident. Always stop the vehicle in a safe location and use the parking brake
before operating the system.
Warning
lNorth Up: Geographic north is up.
Press
ENTER
1
2
Select
press
,
and
ENTER
Map
orientation
l
Head Up: The direction you are
heading is up.
lZOOM OUT: Enlarges the map.
ZOOM
1
lThe map can be displayed in
13 steps with scales from
to
.
ZOOM
Map scale
lZOOM IN: Reduces the map.
(more detail.)
Position before change
<Scale bar>
Imperial 1/32 mi
display (mile)
1/4 mi
(mile)
2 mi
(mile)
16 mi
(mile)
128 mi
(mile)
Metric
display
50 m
500 m
4 km
32 km
256 km
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 17 Wednesday, May 10, 2006 4:29 PM
MEMO
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 18 Wednesday, May 10, 2006 4:29 PM
Destination Entry and Route Search
lYou can set the destination using various methods provided by the system.
ENTER
Before Steps
select
MENU
Select the desi
: ID, OR, WA,
Open the [DESTINATION
ENTRY] Menu
: CA, NV
Change
: AZ, CO, MT, NM
: IA, KS, MN, MO
: OK, TX
(Change
Search Area)
Select
: IL, IN, KY, MI, O
When narrowing
down to city name
Select
:
Cancel the
city selection.
Open the
[DESTINATION
ENTRY] Menu
Select
:
Displays list of
5 city name
s
nearest the
current
position.
:
Displays the
city name
input screen.
Address
When narrowing
Enter the
street
name and
select
down to street name
Select
18
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 19 Wednesday, May 10, 2006 4:29 PM
l
l
Do not keep your eyes fixed on the monitor screen or operate the system while driving.
Do not change the settings and destination locations while driving. Minimize the time spent
viewing the monitor screen and listening to the voice guidance while driving. Operating the system
will distract the driver from looking ahead of the vehicle and may cause an accident. Always stop
the vehicle in a safe location before operating the system.
Route searches with the navigation system can include roads that you cannot drive on and roads that you
are prohibited from driving on due to traffic regulations. Please comply with the traffic regulations.
Warnings
Select the desired Search Area
: ID, OR, WA,
: CA, NV
: AZ, CO, MT, NM, UT, WY
: IA, KS, MN, MO, ND, NE, SD
: OK, TX
: AR, AL, LA, MS, TN
ENTER
RET
: CT, MA, ME, NH, NJ, NY, RI, VT
: DC, DE, MD, PA, VA, WV
: FL, GA, NC, SC
: CANADA
: IL, IN, KY, MI, OH, WI
n narrowing
to city name
:
Cancel the
city selection.
Select
the
Enter
Select
the
Enter
Select
Direct
destination
input
:
the
the
Displays list of
5 city name
earest the
city
street
name
and
street
name
from
the
house
no.
s
n
name
from
the
(
current
position.
page 28)
select
list
list
Enter
the
Select
the
Enter
the
Select the
street name
from the list
:
Displays the
city name
city
city
street
name
and
input screen.
name
and
select
name
from
the
select
list
narrowing
to street name
Select the
street name
from the list
Select the city
name from the
list
Enter
the
house
no.
Select
Enter the
street
name and
select
l For Character Entry, please refer to page 27.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 20 Wednesday, May 10, 2006 4:29 PM
Destination Entry and Route Search
When entering
Open the
[DESTINATION
ENTRY] Menu
Select
the destination
point directly
Select
:
When narrowing
down to city
name
Cancel the
city selection.
Select
:
Displays list
of 5 city
names
nearest the
current
position.
:
Displays the
city name
input screen.
When narrowing
down to category
name
Select the
category
name from
the list
Point of
interest
Select
When narrowing
down to the
nearest facility
Select
:
for facilities clos
nearest city hall
:
for facilities nea
position.
: S
facilities near th
position.
Searches for fac
the current dest
When narrowing
down to a phone
number
Enter the phone
and select
Select
20
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 21 Wednesday, May 10, 2006 4:29 PM
Enter the
POI name
and select
Select the
POI from
the list
hen entering
e destination
oint directly
lect
:
Cancel the
city selection.
hen narrowing
own to city
ame
lect
Select the
:
Select
city name
Displays list
of 5 city
names
from the
list
nearest the
current
position.
Enter the
city name
andselect
Select the
city name
from the
list
:
Displays the
city name
input screen.
hen narrowing
own to category
ame
Select the
category
name from
the list
lect
Select the
city center
name from
the list and
select
hen narrowing
own to the
earest facility
lect
Enter the city
center name
and select
: Searches
for facilities close to the
nearest city hall.
: Searches
for facilities near the current
position.
Select
Select the
Category
name from
the list and
select
: Searches for
facilities near the current
position.
Scroll the map
as necessary
and select
:
Select the
facility from
the list and
Searches for facilities near
the current destinations.
select
hen narrowing
own to a phone
umber
Enter the phone number
and select
lect
l For Character Entry, please refer to page 27.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 22 Wednesday, May 10, 2006 4:29 PM
Destination Entry and Route Search
When stopped
Select the so
: Sorts the
the hospital by D
Select
Displays the police
station select screen.
: Sorts the
the hospital by n
Displays the hospital
select screen.
When driving
Emergency
Sets the destination to the
nearest police station
automatically.
Sets the destination to the
nearest hospital
automatically.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 23 Wednesday, May 10, 2006 4:29 PM
Select the sort methods
: Sorts the police station or
the hospital by Distance.
Select the name from
the list
Select
: Sorts the police station or
the hospital by name.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 24 Wednesday, May 10, 2006 4:29 PM
Destination Entry and Route Search
ENTER
Before Steps
select
MENU
Select
Open the
[DESTINATION
ENTRY] Menu
Memory Point
Select
Select
Home
Select the desi
Select the Prev
Preset Destination
Previous Destination
Intersection
Select
Select
Enter/Select th
1st street name
Select
Enter/Select th
name of the
freeway
Freeway On/
Off Ramp
Select
Select
Enter the latitu
: degrees
: minutes
Coordinates
: seconds
Select from
map
24
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 25 Wednesday, May 10, 2006 4:29 PM
Select the desired Memory Point
: Display up to five previous suggestions.
: Display the five previous suggestions.
: The order of the displayed list can be changed.
Select the desired Preset Destination.
Select the Previous Destination.
Enter/Select the
1st street name
Enter/Select the 2nd
street name
Select
Enter/Select the
name of the
freeway
Select the
desired the
On Ramp or
the Off Ramp
name.
Select
or
Enter the latitude
: degrees
Enter the longitude
Select
: minutes
: seconds
l For Character Entry, please refer to page 27.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 26 Wednesday, May 10, 2006 4:29 PM
Quick POI
lYou can select one of the Six Categories on the menu or List Categories and then select the
POI(s) to be displayed on the map.
ENTER
Before Steps
ENTER
Select
Select the
Open the
[QUICK POI]
categories to be
displayed up to a
maximum of five.
lPOI icon chart
Displaying
POI(s) on a
Map
(
page 29)
For categories
other than the six
displayed, select
and
select them from
the list shown.
Select the POI
you want to find
from the listed
categories.
After you make a
selection, the point of
interest you selected
appears on the map.
: Search POI
Local
Search
along the route
during the guidance
and show the list.
Deleting
POI
Markers
Displaying POI(s) on a Map (
above)
Before Steps
Display the POI.
Select the desired
POI by moving
top of the POI icon.
The name of the selected
POI appears.
Select
on
(Information)
The POI(s) data is
displayed.
Showing
POI Data
If no data is stored for the
selected POI, the POI
name is not displayed.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 27 Wednesday, May 10, 2006 4:29 PM
Character Entry
Select the first several characters
on the screen. (Step 1)
Select your target
in the list.
Names of which spelling starts
with the entered character appear.
lIf a desired name is not in
the list, go back to Step 1,
and try fewer characters.
Select
Select
Select
:
Display up to five previous
suggestions.
Select
:
Display the previous
suggestions.
To enter
the street
name, city
name, and
other.
:
:
Text flow (Right)
Text flow (Left)
:
The order of the displayed list
can be changed. (Displayed
list varies or
may not be
:
:
Move the cursor to the previous
position and delete a character.
The list appears.
displayed depending on what
was input.)
:
Additional text can be input.
(Use when inputting
additional characters after
the list is displayed.)
lExamples
Street: CANAL
-
Street: 52nd Ave.
Enter by selecting characters:
Enter by selecting characters:
C A
Street: MAIN STREET
5 2 n d
A
-
Enter by selecting characters:
M A I N
S
Select the characters on
the screen.
Select
To enter
the house
phone
number,
and other.
: Move the cursor to the
previous position and
delete a character.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 28 Wednesday, May 10, 2006 4:29 PM
Direct Destination Input
Position the
ENTER
cursor on your
1
destination on
the map
Scroll the map and change the map
scale if necessary.
ENTER
2
Select
ENTER
Select
.
Route calculation will be carried out and the entire route
will be displayed on the map.
Direct
Destination
Input
3
4
Select
on your route (
points per trip.
(Way point) to set the address as a way point
page 34). You can set up to 5 way-
Select
.
Route guidance begins using displayed route.
Note
lIf your desired route cannot be found,
(Route
Options) allows the route option settings to be changed.
page 30)
(
lSelecting
for five seconds or more will launch the
Demo mode.
Operate after Step 3 of [Direct Destination Input]
The calculation route can be selected from one of three
types namely, Quick (the fastest route), Altern. (the
standard route), or Short (the shortest route).
4
5
Selecting
Route
Select
(Information).
Details regarding the individual routes (i.e., required time
total distance, roads used, etc.)
Select either
,
, or
, and then select
when you have decided
on the route to be used.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 29 Wednesday, May 10, 2006 4:29 PM
POI Icons on Maps / Delete Destination
n POI (Point of Interest) Icons
The following are POI icons shown on maps.
Restaurant
All restaurants
Travel
Community
Convention Center
Bus Station
Ferry Terminal
Hotel
American
Chinese
Court House
Government Offices
Higher Education
Hospital
Continental
Fast Food
French
Rental Car Agency
Rest Area
Train Station
Library
Park & Recreation
(All Search Areas)
Airport (All Search
Areas)
Italian
Japanese
Mexican
Police Station
School
Recreation
Casino
Seafood
City Center
Golf Course
Thai
Historical
Monument
Banking
Other Restaurants
Bank
ATM
Marina
Shopping
Museum
Grocery Store
Shopping Mall
Ski Resort
Other
Sports Complex
Performing Arts
Business Facility
Automotive
Tourist Attraction
(All Search Areas)
Automobile Club
Gas Station
Parking
Tourist Information
Winery
Amusement Park
(All Search Areas)
Auto Service &
Maintenance
ENTER
Delete
destination
MENU
Select
ENTER Select
ENTER
29
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 30 Wednesday, May 10, 2006 4:29 PM
Route Options
ENTER
lDuring route guidance you can
change the route options, stop or
check the route.
Before Steps
select
MENU
Open the
[ROUTE
Select
OPTIONS] Menu
Route
Preferences
Select
or
roads, major r
and restricted
The route will not
the specified con
Select the button
for the location
to be modified.
Select
(Change
Location).
Shows the map for
destination/way po
Select
Modification
of
Destination
or Way Point
Positions
Select the way
points to change
the order.
Change the destination
and the passing order
of the destination and
way points.
Select the button
Select
Deletion of
Destinationor
Way Points
corresponding to the
destination or way
point to be deleted.
Select
Select
Searches the deto
present position t
according to the s
Route searches th
for all routes.
Detour
The Enter
Route screen
appears.
Select
from
the roads to be
avoided.
Turn List
30
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 31 Wednesday, May 10, 2006 4:29 PM
n
Do not keep your eyes fixed on the monitor screen or operate the system while driving
Do not change the settings and destination locations while driving. Minimize the time spent
viewing the monitor screen and listening to the voice guidance while driving. Operating the system
will distract the driver from looking ahead of the vehicle and may cause an accident. Always stop
the vehicle in a safe location and use the parking brake before operating the system.
Warning
Select
or
for toll
POS
ENTER
roads, major roads, and ferry
and restricted roads.
The route will not necessarily follow
the specified conditions.
Select the button
for the location
to be modified.
Select
(Change
Location).
Move
press
to location and then
ENTER
.
Shows the map for the
destination/way points.
Select the way
points to change
the order.
Change the destination
and the passing order
of the destination and
way points.
Select the button
corresponding to the
destination or way
point to be deleted.
Press
order.
to change the
POS
POS
Select
:
:Cancel the deletion
:
Searches the detour routes at one, three, and five miles from the
present position to the selected routes. (Display range varies
according to the set distance of the selected route.) Whole
Route searches the route that detours from the present position
for all routes.
The Enter
Route screen
appears.
Select
the roads to be
avoided.
from
:
POS
:Cancel the setting
31
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 32 Wednesday, May 10, 2006 4:29 PM
Route Options
ENTER
Before Steps
select
MENU
Open the
[ROUTE
Select
OPTIONS] Menu
Display
Preview
ENTER
Use the button
: Move the s
: Carry out a
be displaye
Select
: Stop the s
: Carry out a
be displaye
: Move to th
: Displays th
Route
Preview
POIs: Disp
selected, it
selected to
32
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 33 Wednesday, May 10, 2006 4:29 PM
Use the buttons displayed on-screen to carry out a simulation run.
: Move the start point.
: Carry out a simulation run in the direction of the start point. When the Simulation starts the button will
be displayed as
, and when selected, it will cause the Simulation to advance quickly.
: Stop the simulation run.
: Carry out a simulation run in the direction of the destination. When the Simulation starts the button will
be displayed as
, and when selected, it will cause the Simulation to advance quickly.
: Move to the destination.
: Displays the [EDIT ROUTE PREVIEW] screen.
: Stops at the destination or the next way-point.
: Stops at a point of interest which has been setup on the route.
: Delete the POI which has been selected.
RET
POIs: Display the six POIs from Quick-POI storage. When one of these is
selected, it will be displayed on the map; furthermore,
can be
selected to display items other than shown here. For more details, refer to page 43.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 34 Wednesday, May 10, 2006 4:29 PM
lYou can, edit, or delete any
marked point.
Address Book
ENTER
Before Steps
select
MENU
Open the
[ADDRESS
BOOK]
Memory Point
Storage
Set a mem
point using
preferred m
Select a m
point to be
modified
Select
MemoryPoint
Confirmation
and
Modification
Select a m
point to be
in Preset
Destinatio
Home.
Preset
Destinations
or Home
storage
Select a m
point to be
deleted.
Memory
Point
Deletion
All Memory
Point
Deletion
: Ca
Show all
icon
or
Displays
Icons at
Memory
Points
34
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 35 Wednesday, May 10, 2006 4:29 PM
Set a memory
point using your
preferred method.
Select a memory
point to be
modified
: Allows the display icon to be
selected. Page 1 and 2 contain
standard icons, whereas the
With Sound page contains icons
which also playback sounds.
(With direction icon function)
The beep alert only activates
when the vehicle approaches to
within about 500m of the memory
point from the set direction.
: Allows the name to be changed.
When editing has been
completed, select
.
Furthermore, select
to
display names on the map, or
if these names are not to
be displayed.
: Allows memory points to be
checked and modified on the
map screen. After checking.
ENTER
: Allows the telephone number to
be modified. When editing has
been completed, select
.
Select a memory
point to be stored
in Preset
Destinations or
Home.
:
: Changes the category to
Preset Destinations
Allows the storage
category to be
changed. Select the
buttoncorresponding
to the new category.
: Changes the category to
Home
Select a memory
point to be
deleted.
: Cancel the deletion.
: Cancel the deletion.
Show all
icon
or
35
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 36 Wednesday, May 10, 2006 4:29 PM
Address Book
ENTER
Before Steps
select
MENU
Open the
[ADDRESS
BOOK]
AvoidArea
Storage
Select
Avoid Area
Confirmation
and
Modification
Avoid Area
Deletion
All Avoid
Area
Deletion
Category
Name
Modification
Select
Previous
Destination
Deletion
All Preset
Destination
Deletion
36
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 37 Wednesday, May 10, 2006 4:29 PM
: Changes the detour
position
: Reduces the size of the
avoid area.
: Increases the size of
the avoid area.
Select an avoid
area using your
preferred method.
:
Allows the name to be
changed. When editing has
been completed, select
. Furthermore, select
to display names on
POS
Select an avoid area
to be modified.
the map, or
if these
names are not to be
displayed.
: Allows avoid area
to be checked and
modified on the
map screen.
Extends
the detour
range
After checking.
Shortens
the detour
range
Changes
the detour
position
Select an avoid
area to be deleted.
: Cancel the deletion.
Cancel the deletion.
:
Select a destination to
be deleted.
: Cancel the deletion.
: The order of the
displayed list can be
changed.
: Cancel the deletion.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 38 Wednesday, May 10, 2006 4:29 PM
Volume Adjustment
You can adjust the volume control for the voice guidance.
ENTER
Before Steps
select
MENU
ENTER
Open the [VOLUME] screen
Select the appropriate button to set the
volume between
(maximum).
(minimum) and
1
2
:Sound output will be muted.
POS
Press the
current vehicle position screen.
button to return to the
38
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 39 Wednesday, May 10, 2006 4:29 PM
MEMO
39
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 40 Wednesday, May 10, 2006 4:29 PM
Navigation Set Up
lYou can alter the map display conditions, the route guidance conditions and show the
system information.
n Stop your vehicle before the following operations.
Do not change the settings and destination locations while driving. Minimize the time
spent viewing the monitor screen and listening to the voice guidance while driving.
Operating the system will distract the driver from looking ahead of the vehicle and may
Warning
cause an accident.
Always stop the vehicle in a safe location and put the parking brake on before operating
the system.
ENTER
Before Steps
Open
select
MENU
ENTER
(
(
(
page 41)
page 43)
page 47)
[NAVIGATION SETUP]
(
(
(
page 48)
page 44)
page 46)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 41 Wednesday, May 10, 2006 4:29 PM
User Setting
Navigation Set Up
ENTER
select
MENU
ENTER
Before Steps
ENTER
select
ENTER
Open the
n Map Color
[USERSETTINGS]
screen
Select a screen color from
to
options.
n Map Mode
lAuto : The display will automatically switch between Day
and Night illumination mode when the headlights are
turned off and on respectively.
lDay
:
The display will be presented in Day illumination mode
regardless of whether the headlights are on or off.
l
Night : The display will be presented in Night illumination mode
regardless of whether the headlights are on or off.
n Distance
Select the distance unit from
or
.
n Average Speed
Set the average speed for each road to be driven.
(This function sets the standard speed (average vehicle speed
for each route) used for calculating the estimated arrival time
when calculating the route time.)
:
Average speed setting
:Changes back to default
n Road Restriction Warnings
The display of warnings during route guidance when passing
through areas with traffic restrictions can be turned on or off.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 42 Wednesday, May 10, 2006 4:29 PM
User Setting
Navigation Set Up
ENTER
select
MENU
ENTER
ENTER
Before Steps
ENTER
select
Open the
n Arrival Time
[USERSETTINGS]
screen
The time which is displayed until reaching the destination or a
way point can be set as an estimated arrival time or the
remaining time.
Select
to display the estimated arrival time, or
to
display the remaining time.
n Keyboard Layout
The layout of input keys can be selected as
or
.
n Clock
Allows selection of whether clock is to be displayed.
n Beep
Allows selection of whether beep will sound.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 43 Wednesday, May 10, 2006 4:29 PM
Quick POI Selection
Navigation Set Up
This function allows you set the categories on the area displayed when the (Point of Interest)
menu is selected on the map. Quick POI enables you store up to six different kinds of
categories which you use most regularly.
ENTER
select
MENU
ENTER
1
2
ENTER
select
ENTER
Open the [QUICK POI SELECTION] screen
Select the button for Quick POI storage.
Note
lSelect the category to be changed
:This button allows you to restore the factory
settings.
Select a category.
Once selected, subcategories will be displayed.
:Subcategories from all of the
individual categories will be
displayed together.
Select the subcategories to be displayed on the
map.
Repeat the above steps to add further POI markers displayed on the menu.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 44 Wednesday, May 10, 2006 4:29 PM
Calibration
Navigation Set Up
This function allows you to correct any error in the position or direction of your vehicle display.
ENTER
MENU
Before Steps
select
Adjusting Current Position and Direction
Set Cloc
The current
a GPS sate
ENTER
select
ENTER
Open the [Calibrate Position] screen
ENTER
se
ENTER
Move to the correct position and select
.
Open the
Use
or
to adjust the direction in which you are
heading, and select
.
Note
Minutes are
under the fo
lDriving acr
lDaylight sa
Map Vers
Distance
The map an
This function automatically corrects any error in the display of the current
position that might occur after tire replacement.
ENTER
se
ENTER
select
ENTER
Map and so
You will have to drive about 6 miles (10 km) before distance correction is complete.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 45 Wednesday, May 10, 2006 4:29 PM
ENTER
ENTER
ENTER
select
Set Clock
The current time is set using this function. Since time notification is provided by
a GPS satellite.
ENTER
select
ENTER
NTER
.
Open the [SET CLOCK] screen
Select
if you prefer 24-hour display;
for 12-hour display.
Select
and similarly, select
hour.
to move the setting ahead by one hour,
h you are
to move it back by one
How to exit
.
Note
Minutes are adjusted by the GPS, however, it is necessary to adjust hours
under the following conditions:
lDriving across different time zones
lDaylight saving time start and end
Map Version
The map and software version numbers can be confirmed using this function.
urrent
ENTER
select
ENTER
Map and software versions are now displayed.
n is complete.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 46 Wednesday, May 10, 2006 4:29 PM
Restore System Defaults
Navigation Set Up
This function replaces all the settings in the mobile navigation system with the initial default
settings.
ENTER
select
MENU
ENTER
Before Steps
ENTER
select
ENTER
Open the [SYSTEM DEFAULTS] screen
Select
.
If you execute Restore System Defaults, all of your stored setting data will be deleted.
[Default List]
Item
Initial condition
Menu names
Map Orientation
North up
Map display mode
Single-screen display
Map Display scale/Map scale for Dual-screen is not object of backup.
Display guidance language
Quick-POI map display
Single-screen: 10,000 map (1/16 mi)
English
All Off
Quick-POI Selection
A : Gas station
B : ATM
C : Police Station
D : Grocery store
E : All Restaurant
F : Hotel
Search Area
US9 (including Washington DC)
Map Color
1
Day/Night/Auto Setting
Distance Units (Miles/KM) (Global setting)
Volume Presets
Auto
Miles
4
Time display change (12h/24h)
Keyboard layout
Arrival Time
Navigation Setup (Clock)
Navigation Setup (Beep)
Map Configuration
Freeway Information
Guidance Screen
24h
ABC
Time
Off
On
Off
ON
Map screen
Turn Guidance Screen
Single
Turn List
46
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 47 Wednesday, May 10, 2006 4:29 PM
Language
Navigation Set Up
You can change the language of the menu and the voice guidance.
ENTER
select
MENU
ENTER
Before Steps
ENTER
select
ENTER
Open the [LANGUAGE] screen
Select your preferred language from the list.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 48 Wednesday, May 10, 2006 4:29 PM
Map Configuration
Navigation Set Up
ENTER
select
MENU
ENTER
ENTER
Before Steps
ENTER
select
Open the
[MAP
CONFIGURATION]
screen
n Map Screen
Select single or dual map display.
Single map
Dual map
n Turn Guidance
Enlarged Junction Diagram
Before a fork in the road, an enlarged diagram of the junction automatically
appears in a second screen.This is to make route guidance even clearer.
During route guidance, an enlarged
diagram of an approaching fork or junction
appears. When you drive past the junction,
the enlarged diagram disappears.
During route guidance, an enlarged diagram of
the freeway automatically appears in a second
screen as you approach a fork on the freeway.
This is to make route guidance even clearer.
Turn List
While using route guidance, the
directions for the next junction where
you have to turn are shown as Turn
List.
Turn Arrow
While using route guidance, the
directions for the next junction where
you have to turn are shown as Turn
Arrow.
n Junction Detail
Select whether the Enlarged Junction diagram screen is displayed automatically.
n Freeway Information
Allows selection of whether the guidance screen is to be displayed while driving on a freeway.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 49 Wednesday, May 10, 2006 4:29 PM
Precautions/System Performance
Voice Guidance
l The navigation system is just a support system for the driver. The driver should
always pay attention to the traffic situation to safely make decisions. You may
be unable at times to arrive at your destination due to out-of-date information
on a map disc. You should be especially careful when selecting an urgent
destination such as a hospital or a police station.
Warnings
l Your route may sometimes include roads that are not open to vehicles or are
closed due to traffic regulations. Please comply with the local traffic
regulations.
l Do not change the settings and destination locations while driving. Minimize
the time spent viewing the monitor screen and listening to the voice guidance
while driving. Operating the system will distract the driver from looking ahead
of the vehicle and may cause an accident. Always stop the vehicle in a safe
location and use the parking brake before operating the system.
Voice guidance has the following functions:
n Intersection guidance
lThe system voice announces the distance to an upcoming turn and the turning direction.
This guidance function is automatic. Therefore, you do not have to set it, and it cannot be
disabled.
lThe system vocally announces the distance to an upcoming highway branching point or
junction.
Route
Second branching point
First branching point
150m
Roundabout.
Take the second
exit.
Left turn ahead,
then right turn.
100m
In 700m left turn.
When two intersections are close together, the
voice guidance may be late.
When two roundabouts are close together, the
voice guidance for the second may be late.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 50 Wednesday, May 10, 2006 4:29 PM
GPS
GPS is a position detecting system utilizing the signals
from GPS satellites deployed by the U.S. Department of
Defense. The Mobile Navigation System uses input from
three or more satellites and calculates the vehicle position
based on the principle of triangulation.
The positioning accuracy of the system corresponds to the
error display of the GPS which is from about 30 to 200 meters
.
lIf you are using the system for the first time, or if you have not used it for some time, it takes
about 5 minutes (or about 2 minutes in open areas) to calculate your vehicle’s position.
n GPS signal reception is poor in the following places
In tunnels
Among high-rise buildings Under elevated roads
In wooded areas
lThe GPS satellites are controlled by the U.S. Defense Department, which may intentionally
lower positioning accuracy. In such cases, there may be vehicle position deviations.
lThere may be vehicle position deviations for some time until GPS signals are received after
turning on the ignition.
Map Matching
This function compares your vehicle’s tracking data with the road data on the map
disc, applies dead reckoning to determine the road you are driving on, and displays
your vehicle on that road on the map.
lIntelligent map matching addresses the following problems to achieve high accuracy in
vehicle positioning.
Position Correction for Elevated Roads
Position accuracy is improved by detecting if the vehicle is
running on or under an elevated road.
Position Correction for Parking Garages
Position accuracy is improved by detecting if the vehicle is
driving in an elevated or underground parking garage.
High-precision Gyrosensor
A gyro detects turns with an accuracy of 0.05° per second.
Combined with a speed sensor, it enables the system to
display the current vehicle position even where GPS signals
may be blocked.
lUsing a spare tire in place of the regular one may cause vehicle position deviations.
lAny difference between the direction which your vehicle actually travels and that shown on
the map is automatically eliminated by azimuth correction.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 51 Wednesday, May 10, 2006 4:29 PM
Precautions/System Performance
Positioning Accuracy
In the following situations, your vehicle position may not be displayed correctly on the
map. But, as you keep driving, your vehicle position will be automatically corrected
utilizing map matching and GPS data.
Running on an
elevated road
Making a turn after Running on a steep Running on a spiral Entering an intersection
driving on a long
straight road
mountain road
road
where a road branches
off at a small angle
CAR FERRY
STOP
Running on gridiron Running on a
Snaking on a wide When your vehicle After getting off a
layout of roads
slippery road with
tire chains
road
is on a turntable
with the ignition
turned off
ferryboat or vehicle
train
Route Guide
Although you may encounter the following problems in route guide, there is nothing
wrong with the system.
In 300 m
right turn
Left turn
ahead
For certain intersection shapes,
For certain intersection shapes,
Voice guidance for the planned
the upcoming turn or the name of you may be prompted to turn right route may continue even after you
the intersection may not be
announced.
or left When you should actually
stay on the same road.
have deviated from that route
such as having turned too early.
300m
In 300 m
right turn
0m
Some points where the road
The Intersection Zoom Map may The announced distance to an
divides on highways or toll roads not always agree with the actual
upcoming turn may differ slightly
from reality.
may not be displayed or
announced.
shape of the intersection.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 52 Wednesday, May 10, 2006 4:29 PM
The navigation system is just a support system for the driver. The driver should always pay
attention to the traffic situation to safely make decisions. You may be unable to arrive at your
destination due to out-of-date information on a map disc. You should be especially careful
Warning
when selecting an urgent destination such as a hospital or a police station.
Route Search
Although you may encounter the following problems in a route search, there is nothing
wrong with the system.
The guide map may
It may also show roads
show roads that are not
that are out of use due
passable due to closure
to the opening of a new
in winter or for other
road or for other
reasons.
It may also show
roads that only permit
one-way traffic.
reasons.
Road
out of
use
Destination
?
?
?
which
exit?
Depending upon the shape of
roundabout (rotary), the guide
map may show a wrong exit.
?
• There may be cases
where the route remains
unchanged after another
search.
• A congested route may
be shown.
Destination
?
?
?
Destination
It may show a
common road under
or over an elevated
road.
The route shown only
reaches a point near
your destination if your
destination has no
direct access road or
the road is too narrow.
It may show a route
where you'll have to
make a U-turn.
?
Destination
52
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 53 Wednesday, May 10, 2006 4:29 PM
Verification First
Troubleshooting
Note
There may be some problems due to operational errors or mistakes. Please read this manual
again and verify that there really is a problem before calling an Expert Dealer, we recommend
an Authorized Mazda Dealer to ask for repair services.
Symptom
Check point
No picture
lCheck if a fuse has blown.
Consult an Expert Dealer, we recommend an Authorized
Mazda Dealer.
lCheck if the voltage level of the vehicle battery is low.
Display does
not open or
close
Recharge the battery or change batteries.
lCheck if the vehicle position changed when ACC was set to
OFF.
When, for example,
The vehicle
position is not
correct
• The vehicle was transported by a ferry boat.
• The vehicle was rotated on a turn table in a parking lot.
• The vehicle was transported by a tow track or other such
vehicle.
Drive the vehicle for a while where you are receiving
GPS signals.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 54 Wednesday, May 10, 2006 4:29 PM
Symptom
Check point
No GPS
symbols are
displayed
lGPS signals may not be received because of obstructions.
After moving the vehicle away from obstructions, the GPS
signals can be received.
The vehicle
position is not
displayed
lCheck if the mode is set to the current position screen.
Press
POS
lCheck if the volume control for the voice guidance has been
turned off.
lCheck if the vehicle is off the route.
Repeat the route search while checking the route guide
screen.
lCheck if you are driving the vehicle in the wrong direction on
No voice
guidance
the route.
Repeat the route search checking the direction of the
destination.
Buttons on the
remote control
do not beep
lCheck if [Beep] is set to [Off] (
page 42).
54
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 55 Wednesday, May 10, 2006 4:29 PM
Error Messages
Troubleshooting
Error message
Solution
l
The disc is not installed.
Check if the disk is installed. If installed, check if the
installed disk is correct.
Please insert a
MAP DVD.
MAP DVD-Read
Error
l
The disc is wet, dirty, scratched, or upside down, or the disc
cannot be played with this unit or the incorrect disk is installed.
Eject the disc and check it.
The disc
installed is not
a MAP DVD.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
MAZDASPEED6_NAVI_EA.book Page 56 Wednesday, May 10, 2006 4:29 PM
Maintenance
Care of the Product
n Cleaning this product
Use a dry, soft cloth to wipe it.
n Cautions for cleaning
Never use solvents such as benzene and thinners, they could mar the surface of the unit.
n Map disc
If you require the latest map disc, consult an Expert Dealer, we recommend an Authorized
Mazda Dealer.
Handling and Care of Map Discs
n How to hold the disc
Label side
lDo not touch the underside of the disc.
lDo not scratch the disc.
lDo not bend the disc.
lWhen not in use, keep the disc in the case.
n Disc Cleaning
lUse a dry, soft cloth to wipe from the center outward.
<Right>
<Wrong>
n Do not leave discs in the following places:
lDirect sunlight
lNear car heaters
lIn dirty, dusty and damp areas
lOn seats and dashboards
56
Download from Www.Somanuals.com. All Manuals Search And Download.
|