Gas Dryer
PRODUCT MODEL NUMBERS
MGD3100D, MGD4100D, MGD5100D, MGD7100D, MGD8100D
Side view:
Front view:
27"
(686 mm)
383/4" Min.
(984 mm)
39" Max.
(990 mm)
Bottom view:
Back view:
Recommended Installation Spacing:
61/4"
(159 mm)
3"
(76 mm)
18" min.
(457 mm)
48 in.2 min.
(310 cm2)
297/8"*
(759 mm)
Water inlet
(Steam Models Only)
53/4"*
(146 mm)
31/2"*
(89 mm)
Vent
Gas
24 in.2 min.
(155 cm2)
5"
3"
(76 mm)
(127 mm)
61/8"*
(156 mm)
3/4"*
(18 mm)
143/8"
1"
(25 mm)
1"
(25 mm)
(365 mm)
253/4"
(654 mm)
NOTE: Most installations require a minimum of 5" (127 mm)
clearance behind dryer for exhaust vent with elbow. See
“Venting Requirements.”
Installation spacing for recessed area or closet installation
All dimensions show recommended and minimum spacing allowed.
■
■
■
■
Additional spacing should be considered for ease of installation and servicing.
Additional clearances might be required for wall, door, floor moldings, dryer venting, and gas line.
Additional spacing should be considered on all sides of the dryer to reduce noise transfer.
For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are
required. Louvered doors with equivalent ventilation openings are acceptable.
W10676163A
04/2014
■
Companion appliance spacing should also be considered.
Download from Www.Somanuals.com. All Manuals Search And Download.
|