Electric Dryer
PRODUCT MODEL NUMBERS
MED7500Y
Side view:
Back view:
Front view:
233/8"
39"
31/4"
(991 mm)
(594 mm)
(83 mm)
231/4"
(603 mm)
Power supply
cord/cable
331/4"
(845 mm)
27"
(686 mm)
Vent
113/4"
(299 mm)
NOTE: Most installations require a minimum of
5" (127 mm) clearance behind dryer for exhaust
vent with elbow. See “Venting Requirements.”
Recessed or closet installation (dryer only):
Custom undercounter installation (dryer only):
3"
(76 mm)
48 in.2
18"9m" in
((425279mmmm))
(310 cm2)
331/4"
(845 mm)
24 in.2
(155 cm2)
1"
(25 mm)
3"
3"
(76 mm)
(76 mm)
1"
(25 mm)
1"
(25 mm)
1"
(25 mm)
Recessed or closet installation – Stacked with stack
kit (Accessory):
Installation spacing for recessed area
or closet installation
12"
(305 mm)
n All dimensions show recommended and minimum spacing allowed.
n Additional spacing should be considered for ease of
installation and servicing.
3"
(76 mm)
n Additional clearances might be required for wall, door, floor moldings, and
48 in.2
dryer venting.
(310 cm2)
653/4"
(1670 mm)
n Additional spacing should be considered on all sides of the dryer to reduce
noise transfer.
n For closet installation with a door, minimum ventilation
openings in the top and bottom of the door are required. Louvered doors
with equivalent ventilation openings are
24 in.2
(155 cm2)
51/4"
3"
(133 mm)
(76 mm)
acceptable.
1"
(25 mm)
n Companion appliance spacing should also be considered.
1"
(25 mm)
W10445417B
02/2012
Download from Www.Somanuals.com. All Manuals Search And Download.
|