Thank you for purchasing our product.
Please read this User’s Manual before
using the product. Change without Notice
16 Channel Digital Video Recorder
User’s Manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
About this document
Before installing stand alone DVR, be sure to thoroughly review and follow the instructions in this Users
Manual. Pay particular attention to the parts that are marked NOTICE.
Also, when connecting with external application, first turn the power OFF and follow manual
instruction for appropriate installation.
Before reading this document
1. This document is intended for both the administrator and users of stand alone DVR Model.
2. This manual contains information for configuring, managing and using stand alone DVR Model.
3. To prevent fire or electrical shock, do not expose the product to heat or moisture
4. Be sure to read this manual before using stand alone DVR Model.
5. For questions and technical assistance of this product, contact your local dealer.
►Strong recommendation on installation of the DVR unit
1. Check electricity at the place you want to install the DVR unit is stable and meets our electricity
requirements.
Unstable electricity will cause malfunction of the unit or give critical damage to the unit.
2. Several chips on the main board of the DVR unit and hard disk drive inside the unit generate heat,
and it must be properly discharged.
Do not put any objects just beside exhaust port(fan) on the left side of the unit and do not close up an
opening (fresh air in-take) on the right side of the unit..
3. Put the DVR unit at well-ventilated place and do not put heat-generating objects on the unit.
When it is installed inside 19 inch mounting rack together with other devices, please check built-in
ventilation fan of the rack is properly running.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Content
Safety Precautions………………………………………………………………………………………………… 2
About this document………………………………………………………………………………………………. 3
Before reading this document……………………………………………………………………………………. 3
Unite Description of Front Panel………………………………………………………………………………… 5
Unit Description of Rear Panel……………………………………………………………………………………6
Installation………………………………………………………………………………………………………….. 7
Function Setup…………………………………………………………………………………………………….. 15
Login…………………………………………………………………………………………………………. 15
Basic Operation…………………………………………………………………………………………….. 16
USB Data Read and Networking………………………………………………………………………………... 39
Record Time Table: 80 GB HD………………………………………………………………………………….. 49
VGA Description (Optional) ……………………………………………………………………………………… 50
Additional…………………………………………………………………………………………………………….51
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Unit Description of Front Panel
16 / 9 / 4 split screen
1 ~ 16 full screen
Water Mark function
Freezer / Zoom / Sequence / Information / Audio
Menu button
MENU :
PLAY :
REC :
Play button
Record button
Key lock button
LOCK :
BACKUP :
T-SRH :
ESC :
Data back up button
Time search playback button
Function exit button
Value change button
Direction UP / Down,
Record and play stop,
Direction Left / Right
Playback forward or reverse.
Playback pause / steps.
ENTER
Remote controller IR
Function LED light display
Shuttle
USB. Data backup or firmware update
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Unit Description of Rear Panel
Power cord in 12V/5A, power switcher (ON / OFF)
Camera 1 ~ 16 in and
looping out
75 Ohm ON/OFF (high/low adjust)
Audio channel input x 1 and output x 1
VG A
VGA output. PC monitor connector.
(Optional)
Monitor out
S-Video (Y/C) monitor
RS-485 control keyboard connector
RS-232 connector (ISP. For RD control)
Alarm connector
LAN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Procedure
1) Camera Connection
DC
LEVEL
V.P
Connect the camera to the CAMERA INPUT
on the Rear Panel of the 16 CH DVR.
VIDEO
CH4
CH4
CH1
CH1
CH2
CH2
CH3
CH3
DC
MONITOR
VIDEO
LENS
AC24V/DC12
Rear part of CAMERA
2) Monitor Connection (Composite Connection
Method)
CH4
CH1
CH1
CH2
CH2
CH3
MONITOR
CH3
CH4
Connect the monitor to the MONITOR OUT on
the Rear Panel of the 16 CH DVR.
VIDEO
OUT
A
IN
3) Monitor Connection
CH4
CH1
CH1
CH2
CH2
CH3
Connect S-VIDEO Monitor to MONITOR OUT
on the Rear Panel of the 16 CH DVR.
MONITOR
CH3
CH4
VIDEO
OUT
A
IN
4) Sensor Connection
Connect the Sensor to the SENSOR INPUT/
OUTPUT on the Rear Panel of the system
1. ALARM 1
2. ALARM 2
3. ALARM 3
4. ALARM 4
5. ALARM 5
6. ALARM 6
7. ALARM 7
8. ALARM 8
9. ALARM 9
10.ALARM 10
11. ALARM 11
12.ALARM 12
13. DGND
14. ALARM 13
15. ALARM 14
16. ALARM 15
17. ALARM 16
18.
19.
20. DGND
21. ALARM COM
22. ALARM NC
23. ALARM NO
24. DGND
13,12,11,10,9,8,7,6,5,4,3,2,1
25. DGND
25,24,23,22,21,20,19,18,17,16,15,14
◆Relay output : COM+NC, COM+NO
◆Alarm input : Short-circuit between Alarm1, Alarm2, Alarm3 or Alarm4 and GND is recognized as alarm
by default. Alarm 1 ~ 16 will be corresponding to Camera 1 ~ 16.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTICE: Sensor input is RECOGNIZED as LOW when alarm signal is on a level with GND, and it is
recognized as HIGH when alarm signal is FLOATING or 5V. Following is internal circuit.
5
V
Internal Circuit
D1
Thus, there is a danger of damage, when the sensor input goes to a Negative level or voltage higher than 5V.
5) Network Connection
DVR connects to LAN
ETHERNET
rks
TERATRAY CONNECTION
◆To view video image on the computer through internet with DVR view software.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
5) HDD connection
1
How to connect single HDD
2
How to connect 2 HDD
I/O BOARD
I/O BOARD
1
2
1
2
2
1
MASTER
HDD1
tie
3
MASTER
HDD
MAIN BOARD
MAIN BOARD
3
SLAVE
HDD2
3
Set the drive jumpers as specified by hard disk drive manufacturer.
Set the drive jumpers as specified by hard disk drive manufacturer.
1. Make sure the HDD is MASTER.
2. Make sure the cable connector is
correct.
1. Make sure the HDD is MASTER and
SLAVE.
2. Make sure the cable connector is
correct.
3. Please check the HDD panel for
Master set up.
3.
Please check the HDD panel for
Master and Slave set up.
Notice:
-The 16 ch DVR provides 2 internal hard drives. We provide one hard disk drive with removable rack; the
other one is fixed designed.
- We recommend you to set the Removable Hard Disk as Slave. Set another one as the Master.
-Hard Disk Master and Slave jumper pin must right, otherwise it makes DVR work fault.
Hard Disk testing table:
Brand
Seagate
IBM
Model
Barracuda
DeskStar
Caviar
Capacity
80 GB
Notice
80 GB
WD2000
Hitachi
Maxtor
200 GB
80 GB
DeskStar
MaxLineII
300 GB
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture
Full screen or split screen display
Press
button, to display 16 / 9 / 4 quarterly split screen.
Press numeric buttons
to display the desired camera image in full screen.
1.) FREEZE Mode
1. In live mode press
(FREEZE) button to freeze image.
2. Press
again to cancel freeze mode.
2.) Zoom Mode(Display Enlargement.)
Go to full screen mode with numeric buttons at live or playback
mode, then press ZOOM button to display screen Enlargement.
Use
button to move position.
3.) Auto Mode
Press
(AUTO) button to start screen auto sequencing, and press it again to cancel auto mode.
4.) W.MARK. Water Mark mode.
Water Mark protection function on or off. To prevent hacker using special software to modify the image data.
5.) INFO (System Information)
** SYSTEM INFORMATION **
1.IP ADDR:
2.GATEWAY:
3.NETMASK:
4.NET USER:
5.HDD SIZE:
6.HDD USED:
7.STATUS1
8.STATUS2
9.UPTIME
10.VERSION:
10
Download from Www.Somanuals.com. All Manuals Search And Download.
6.) BACKUP. Image backup mode.(Image back up must be done on playback mode only.)
Locate the playback point of which you want. Press BACKUP, the BACKUP CAUTION window pop-up. Press
ENTER to begin data back up. Capacity of USB device is not limit.
On playback mode, presses BACKUP:
Lower-Right corner of the screen:
** BACKUP CAUTION **
THE ORIGINAL BACKUP FILE
WILL BE KILLED.
PRESS [ENTER] TO BACKUP.
PRESS [BACKUP] TO CANCEL.
xxx K
xxx K (Presently back up progress)
Important:
If DVR cannot detect USB device, please format it to FAT or FAT 32 on PC OS.
Additional:
During playback, USB device is full or user press BACKUP button screen display a “PAUSE” caption, User
takes out the USB device to computer USB slot then save data to hard disk. After re-insert USB device to
DVR slot, user press BACKUP again. Press ENTER to continue backup or backup button to cancel.
** BACKUP CAUTION **
PAUSE
THE ORIGINAL BACKUP FILE
WILL BE KILLED.
PRESS [ENTER] TO BACKUP.
PRESS [BACKUP] TO CANCEL.
7.) Key Lock function
>On the Live mode, press
(lock), Only, numeric, freeze, auto, and zoom buttons could work.
Press lock key again to enter the login-in window. Enter admin or user password to unlock.
Key lock function only accept password correct log in even re-boot DVR power.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
8.) AUDIO function ))))
))))
xxxxxxxxx
Audio playback: AUD (Audio),
)))))))displays on the Upper-left of screen. At that time, audio
will playback. Press it again to turn it off.
Notice
Audio playback only on normal( x 1 ) playback.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
1. Playback Mode
PLAY
1) Press
button to begin playback. (System playback the images backward)
MAIN PLAY PAGE
2. T-SRH button
1) T-SRH: Playback by time search.
1.MASTER TIME LIST
2.SLAVE TIME LIST
3.MASTER EVENT LIST
4.SLAVE EVENT LIST
5.GOTO DATE: 2004/12/31
6.GOTO TIME: 12:12
7.GOTO PLAY
Press T-SRH button to active playback function.
Press direction button
UP/DOWN to choose
items.
1) TIME LIST (Playback image by Time-Search): Recorded images list (by hours)
TIME LIST
Y / M / D H : M
Y / M / D H : M
Y / M / D H : M (Beginning of recording time)
Every playback data list displays by an hour.
Y / M / D H : M (End of recording time)
No page display limit. 10 items display on each page.
Press direction button UP/DOWN to choose items.
Press
values change button to change to previous / next page.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2) EVENT LIST (Alarm List): Event source- Video loss / Alarm trigger / Motion / Record
EVENT LIST
NO Y / M / D H : M CH EVENT
10 items display on each page / Total 5000 items display for 500 pages. When event list is out of compass,
the total items are less then 5000.
NO Y / M / D H : M CH EVENT
>Event happens time and list.
CH: Event Channel Display.
>1 CH ~ 16 CH
Event type.
>Includes Motion / Alarm / V-Loss / Record
Press direction button UP/DOWN to choose items.
Press
values change button to change page. Press ENTER to start
playback.
>Special time search playback:
Go TO DATE：２００２／１２／１２
-Choose year / month / day
>Press direction button Left / Right to choose items, press values change button
GOTO TIME：１２：１２
to change value.
to change value.
-Choose hour and minute
>Press direction button Left / Right to choose items, press values change button
GOTO PLAY
-Press ENTER button to start playback.
Notice: Playback speed change by
. Speed is x 1, x 2, x 4, x 8, x 16.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Setup
LOGIN
MENU
1) Press
button to enter into menu. You could do the system function setup in MENU.
2) Password enter window pop-up:
CHECK PASSWORD MENU
PASSWORD (*****)
Default password (Account-Admin) : 44444
Default password (Account-User) : 11111
3) Press numeric (1 ~ 10 )button or remote controller ( 1 ~ 10 )to choose password.
4) Remote controller function buttons are same as DVR panel function buttons.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Press MENU button to enter MAIN SETUP PAGE.
MAIN SETUP PAGE
1. HDD INFORMATION
2. DATE-TIME SETUP
3. DISPLAY SETUP
4. CAMERA SETUP
5. BUZZER
6. RELAY
SETUP
SETUP
7. SYSTEM SETUP
8. ADVANCED SETUP
MENU, ESC: EXIT, ENTER: RUN
1) Use direction button up/down
button to select setup item.
2) Press
button to enter into sub-menu function setup.
3) Press sub-menu item with direction button up/down
or left/right button.
And change the value with
values change button or turn inner-shuttle.
4) Press ESC to go back to main / sub menu or exit menu.
Notice:
1. ADMIN level can setup all DVR menu functions.
2. USER level cannot setup ADVANCED page of DVR main menu function.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
1. HDD INFORMATION
MAIN SETUP PAGE
POSITION SIZE USED BRAND
1. HDD INFORMATION
2. DATE-TIME SETUP
3. DISPLAY SETUP
4. CAMERA SETUP
MASTER
LAST TIME
SLAVE
5. BUZZER
6. RELAY
SETUP
SETUP
LAST TIME
7. SYSTEM SETUP
8. ADVANCED SETUP
MENU, ESC: EXIT,
:PAGE
MENU, ESC: EXIT, ENTER: RUN
- 2 hard disk information display.
Information display: POSITION SIZE USED BRAND
>POSITON: Master / Slave
>SIZE: Hard Disk capacity. xxGB. Maximum display is 999MB
>USED: 00 ~ 100 %. Hard disk overwrites 100 ~ 199 %.
>BRAND: DVR auto detect hard disk brand.
>LAST TIME: The last record time display.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
2. DATE-TIME SETUP
MAIN SETUP PAGE
1. HDD INFORMATION
2. DATE-TIME SETUP
3. DISPLAY SETUP
4. CAMERA SETUP
DATE-TIME SETUP PAGE
1. DATE 2000 / 00 / 00
2. TIME
3. FORMAT
5. BUZZER
6. RELAY
SETUP
SETUP
3. DISPLAY AT xx LINE(S)
7. SYSTEM SETUP
8. ADVANCED SETUP
MENU, ESC:EXIT,
:MODIFY
MENU, ESC: EXIT, ENTER: RUN
1. DATE
2. TIME: > Use direction button up/down choose position, values change button to change date and time
values.
3. FORMAT:
YY/MM/DD, MM/DD/YY, DD/MM/YY, YY/ENG/DD, ENG/DD/YY, DD/ENG/YY, YYYY/MM/DD,
MM/DD/YYYY, DD/MM/YYYY, YYYY/ENG/DD, ENG/DD/YYYY, DD/ENG/YYYY.
Y=Year. M=Month. D=Day. ENG=Month display in English.
4. DISPLAY AT xx LINE(S)
-Date and Time position on screen xx line(s). 00 ~ 23.
-. Day and time change
Press direction button up/down/left/right to choose items or move date-time position.
Press
values change button to change values.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
3. DISPLAY SETUP
MAIN SETUP PAGE
1. HDD INFORMATION
2. DATE-TIME SETUP
3. DISPLAY SETUP
4. CAMERA SETUP
DISPLAY SETUP PAGE
1. DATE-TIME
ON
ON
2. CAMERA TITLE
3. PB DATE-TIME
4. PB CAMERA TITLE
5. DVR STATUS
ON
5. BUZZER
6. RELAY
SETUP
SETUP
ON
ON
7. SYSTEM SETUP
8. ADVANCED SETUP
6. BORDER COLOR
WHITE
MENU, ESC:EXIT,
:MODIFY
MENU, ESC: EXIT, ENTER: RUN
1. DATE-TIME: Date and Time caption display mode on or off setup.
>ON / OFF
2. CAMERA TITLE: Camera Title caption display mode on or off setup.
>ON / OFF
3. PB DATE-TIME: Play back date and time caption display mode on or off setup.
>ON / OFF
4. PB CAMERA TITLE: Play back camera title caption display mode on or off setup.
>ON / OFF
5. DVR STATUS: DVR system, record, playback, audio caption display mode on or off setup.
>ON / OFF
6. BORDER COLOR: Border color WHITE / DARK / BLACK / GRAY.
Press direction button up/down to choose the desired item.
Press
values change button to change values.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
4. CAMERA SETUP
MAIN SETUP PAGE
CAMERA SETUP PAGE
1. COLOR SETUP
1. HDD INFORMATION
2. DATE-TIME SETUP
3. DISPLAY SETUP
4. CAMERA SETUP
2. TITLE SETUP
3. SCREEN POSITION SETUP
4. V-LOSS DISPLAY SETUP
5. VIDEO MASK SETUP
5. BUZZER
6. RELAY
SETUP
SETUP
7. SYSTEM SETUP
8. ADVANCED SETUP
MENU, ESC: EXIT, ENTER: RUN
MENU, ESC: EXIT, ENTER: RUN
COLOR SETUP PAGE
** CHANNEL NUMBER 01
1. BRIGHTNESS 00
(1.) COLOR SETUP
CAMERA SETUP
2. CONTRAST
00
1. COLOR SETUP
3. SATURATION 00
2. TITLE SETUP
4. HUE
00
00
3. SCREEN POSITION SETUP
4. V-LOSS DISPLAY SETUP
5. VIDEO MASK SETUP
5. GAIN
>>DEFAULT RESET<<
MENU,ESC:EXIT,
:MODIFY
COLOR SETUP : Adjust Camera Image
CHANNEL NUMBER
BRIGHTNESS
CONTRAST
SATURATION
HUE
: Select camera 01 ~ 16
: Adjust screen brightness
: Adjust color contrast
: Adjust color saturation
: Adjust color hue
(-31~ +32)
(-31~ +32)
(-31~ +32)
(-31~ +32)
(-31~ +32)
GAIN
: Adjust image signal level
>>DEFAULT RESET<< : Press ENTER button to reset DVR values.
Press direction button up/down to choose items.
Press
values change button to change values.
>Right adjustment of each element in COLOR setup will increase picture quarterly displayed. We recommend
you to adjust each element of COLOR SETUP for cameras and monitor to be connected to the DVR unit.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
(2.) TITLE SETUP: Input TITLE of each camera. 9 characters can be input.
TITLE SETUP PAGE
CH 01 (01
CH 02 (02
CH 03 (03
CH 04 (04
CH 05 (05
CH 06 (06
CH 07 (07
CH 08 (08
)
)
)
)
)
)
)
)
CH 09 (09
CH 10 (10
CH 11 (11
CH 12 (12
CH 13 (13
CH 14 (14
CH 15 (15
CH 16 (16
)
)
CAMERA SETUP
1. COLOR SETUP
)
2. TITLE SETUP
)
)
)
)
)
3. SCREEN POSITION SETUP
4. V-LOSS DISPLAY SETUP
5. VIDEO MASK SETUP
MENU, ESC: EXIT:
: MODIFY
Press direction button up/down/left/right to choose items and position.
Press
values change button to change values.
Characters choose:
Space:
Numeric: 0 / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9
Capital letter: A / B / C / D / E / F / G / H / I / J / K / L / M / N / O / P / Q / R / S / T / U / V / W / X / Y / Z
21
Download from Www.Somanuals.com. All Manuals Search And Download.
(3.) SCREEN POSITION SETUP
**** SCREEN POSITION****
UP
CAMERA SETUP
1. COLOR SETUP
LEFT
RIGHT
2. TITLE SETUP
3. SCREEN POSITION SETUP
4. V-LOSS DISPLAY SETUP
5. VIDEO MASK SETUP
DOWN
ENTER : DEFAULT
ESC
: QUIT
1.
Press direction buttons up/down/left/right to move screen position.
2. Press ENTER button for default.
3. Press ESC button to quit.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
(4.) V-LOSS DISPLAY SETUP
VLOSS SETUP PAGE
**V-LOSS FUNCTION:
CAMERA SETUP
1. COLOR SETUP
2. TITLE SETUP
CH 01 : ON CH 09 : ON
CH 02 : ON CH 10 : ON
CH 03 : ON CH 11 : ON
CH 04 : ON CH 12 : ON
CH 05 : ON CH 13 : ON
CH 06 : ON CH 14 : ON
CH 07 : ON CH 15 : ON
CH 08 : ON CH 16 : ON
3. SCREEN POSITION SETUP
4. V-LOSS DISPLAY SETUP
5. VIDEO MASK SETUP
MENU, ESC: EXIT:
: MODIFY
** V-LOSS FUNCTION: ON / OFF
CH 01 : ON / OFF CH 09 : ON / OFF
CH 02 : ON / OFF CH 10 : ON / OFF
CH 03 : ON / OFF CH 11 : ON / OFF
CH 04 : ON / OFF CH 12 : ON / OFF
CH 05 : ON / OFF CH 13 : ON / OFF
CH 06 : ON / OFF CH 14 : ON / OFF
CH 07 : ON / OFF CH 15 : ON / OFF
CH 08 : ON / OFF CH 16 : ON / OFF
Press direction buttons up/down/left/right to choose items.
Press values change button to change values.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
(5.) VIDEO MASK SETUP
VIDEO MASK SETUP PAGE
**VIDEO MASK FUNCTION:
CH 01
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
CH 12
CH 13
CH 14
CH 15
CH 16
CAMERA SETUP
1. COLOR SETUP
2. TITLE SETUP
3. SCREEN POSITION SETUP
4. V-LOSS DISPLAY SETUP
5. VIDEO MASK SETUP
MENU, ESC: EXIT:
: MODIFY
**VIDEO MASK FUNCTION: ON / OFF
CH 01 : ON / OFF CH 09 : ON / OFF
CH 02 : ON / OFF CH 10 : ON / OFF
CH 03 : ON / OFF CH 11 : ON / OFF
CH 04 : ON / OFF CH 12 : ON / OFF
CH 05 : ON / OFF CH 13 : ON / OFF
CH 06 : ON / OFF CH 14 : ON / OFF
CH 07 : ON / OFF CH 15 : ON / OFF
CH 08 : ON / OFF CH 16 : ON / OFF
MASK means the channel would not display on the live screen, but still can set it on recording.
Press direction buttons up/down/left/right to choose items.
Press values change button to change values.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
5. BUZZER SETUP
MAIN SETUP PAGE
BUZZER SETUP PAGE
1. HDD INFORMATION
2. DATE-TIME SETUP
3. DISPLAY SETUP
4. CAMERA SETUP
**BUZZER FUNCTION ON
BUTTON BUZZER
ALARM BUZZER
MOTION BUZZER
V-LOSS BUZZER
HDD-FULL BUZZER
CRASH BUZZER
ON
ON
ON
ON
ON
ON
5. BUZZER
SETUP
6. RELAY
SETUP
7. SYSTEM SETUP
8. ADVANCED SETUP
MENU, ESC: EXIT:
: MODIFY
MENU, ESC: EXIT, ENTER: RUN
**BUZZER FUNCTION: All buzzer function
>ON / OFF
1. BUTTON BUZZER?
> ON / OFF
2. ALARM BUZZER?
> ON / OFF
3. MOTION BUZZER?
> ON / OFF
4. VLOSS BUZZER?
> ON / OFF
5. HDD-FULL?
> ON / OFF (Buzzer on if hard disk record only once.)
6. CRASH?
> ON / OFF (Buzzer on if hard disk has crash area.)
Press direction buttons up/down to BUZZER SETUP items.
Press values change button to change values.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
6. RELAY SETUP
MAIN SETUP PAGE
1. HDD INFORMATION
2. DATE-TIME SETUP
3. DISPLAY SETUP
4. CAMERA SETUP
RELAY SETUP PAGE
**RELAY FUNCTION: ON
1. ALARM
2. MOTION
3. V-LOSS
RELAY: ON
RELAY: ON
RELAY: ON
5. BUZZER
SETUP
4. HDD-FULL RELAY: ON
5. CRASH RELAY: ON
6. RELAY
SETUP
7. SYSTEM SETUP
8. ADVANCED SETUP
MENU, ESC: EXIT, ENTER: RUN
**RELAY FUNCTION: ON
1. ALARM
2. MOTION
3. VLOSS
RELAY: ON
RELAY: ON
RELAY: ON
4. HDD FULL RELAY: ON (Relay on if hard disk record only once.)
5. CRASH
RELAY: ON (Relay on if hard disk has crash area.)
Press direction buttons up/down to each item.
Press values change button to change values.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
7. SYSTEM SETUP
MAIN SETUP PAGE
SYSTEM SETUP
1. DWELL INTERVAL
2. LANGUAGE
1. HDD INFORMATION
2. DATE-TIME SETUP
3. DISPLAY SETUP
4. CAMERA SETUP
3. VIDEO INPUT
4. RS-485 ID
5. BUZZER
6. RELAY
SETUP
SETUP
5. RS-485 PROTOCOL
6. RS-485 BAUD RATE
UPTIME: xx HRS
MENU, ESC: EXIT: : MODIFY
7. SYSTEM SETUP
8. ADVANCED SETUP
MENU, ESC: EXIT, ENTER: RUN
SYSTEM SETUP
1. DWELL INTERVAL:
- 0 ~ 999SEC
2. LANGUAGE:
-
-
ENGLISH / CHINESE / JAPANESE / FRENCH
After change language, user needs to exit menu. Language would change next time back to menu.
3. VIDEO INPUT: NTSC / PAL system detection.
-
-
AUTO / NTSC / PAL
User needs to connect camera with power first before DVR power on if choose AUTO. If manual
NTSC / PAL, then need to power reset.
4. RS-485 ID:
- 01 ~ 16
5. RS-485 PROTOCOL
- KEYB / LILIN / PELCO-P / PELCO-D / NICECAM / OFF
6. RS-485 BAUD RATE
- 1200 / 2400 / 4800 / 9600
-UPTIME: xx HRS. This means the total system working time after DVR first power on.
RS-485 ID and protocol is the command for system control keyboard. If user has no keyboard to
control then does not have to care.
Press direction buttons up/down to choose items.
Press values change button to change values.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
8. ADVANCED SETUP
MAIN SETUP PAGE
ADVANCED SETUP PAGE
1. ALARM SETUP
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
1. HDD INFORMATION
2. DATE-TIME SETUP
3. DISPLAY SETUP
4. CAMERA SETUP
5. BUZZER
6. RELAY
SETUP
SETUP
7. SYSTEM SETUP
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
8. ADVANCED SETUP
MENU, ESC: EXIT, ENTER: RUN
ADVANCED SETUP PAGE
1. ALARM SETUP
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
ALARM SETUP PAGE
1. ALARM FUNCTION
2. ALARM DURATION
3. ALARM RELAY SETUP
4. ALARM POLARITY SETUP
MENU, ESC: EXIT:
: MODIFY
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
1. Alarm function: ON / OFF. Function on, all channel will record if alarm trigger.
2. Alarm duration: 0 ~ 999
ALARM RELAY SETUP
>ALARM 01 ~ ALARM 16: ON / OFF
ALARM POLARITY SETUP
>ALARM 01 ~ ALARM 16: N.O. / N.C. / OFF
Press direction buttons up/down to choose items.
Press values change button to change values.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
2. MOTION SETUP
MOTION SETUP PAGE
**MOTION FUNCTION ON
**MOTION DURATION
**CHANNEL NUMBER
1. SENSITIVITY
ADVANCED SETUP PAGE
1. ALARM SETUP
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
2. VELOCITY
3. ACTIVATION
4. RELAY
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
5. MOTION AREA SETUP
MENU, ESC: EXIT:
: MODIFY
MOTION SETUP
**MOTION FUNCTION (For all channel)
-ON / OFF
**MOTION DURATION
-0 ~ 999
**CHANNEL NUMBER
-CH 01 ~ 16
1. SENSITIVITY Adjusts motion Detection Sensitivity.
-1 ~ 32 (low Æhigh)
2. VELOCITY Adjusts motion object slow /fast speed detection
-1 ~ 10 (slow speedÆfast speed)
3. ACTIVATION (For each channel)
-ON / OFF. The function only for channel motion detect active, not for motion record per each.
4. RELAY
-ON / OFF
5. >MOTION AREA SETUP<
Press direction buttons up/down to choose items.
Press values change button to change values.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
> MOTION AREA SETUP <
All area detect with factory default. Press ENTER button to change mode and then increase or reduce.
For example:
Clear lattices
Press value change button to reduce.
Add lattices
Press value change button to reduce.
Icon:
Press
to increase all area, press
to reduce all area.
Icon:
Press Up / Down / Left / Right direction key to move, press to increase lattices; press to reduce lattices.
Icon: +
Press Up / Down / Left / Right direction key to move and increase area.
Icon: X
Press Up / Down / Left / Right direction key to move and reduce area.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
3. RECORD SETUP
ADVANCED SETUP PAGE
RECORD SETUP
1. HDD FULL
1. ALARM SETUP
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
2. RECORD SPEED
3. RECORD MODE
4. RECORD AUDIO
5. QUALITY
6. SCHEDULE SETUP
7. CHANNEL SETUP
MENU, ESC: EXIT:
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
: MODIFY
RECORD SETUP
1)
HDD FULL: When hard disk is full, DVR next step is kept overwrite record or stop record?
-OVERWRITE / STOP REC
Notice: STOP REC：One hard disk record full, stop record. Two hard disk, both of them record full,
stop record.
Record process
OVERWRITE
STOP REC
M(99%), S(0%) Æ M(100%), S(0%)
To second and record To second and record
M(99%), S(100%) Æ M(100%), S(100%) To second and record To second and record
M(0%), S(99%) Æ M(0%), S(100%)
To first and record
To first and record
Stop record
M(100%), S(99%) Æ M(100%), S(100%) To first and record
Notice:
When hard disk is full, system buzzer on, and then presses ENTER to stop. Next to press REC, over write
message window popup.
"** OVERWRITE CAUTION **"
"THE HDD ARE BOTH FULL,"
"RECORDING WILL DELETE"
"THE OLD IMAGE."
Press ENTER to continue record.
Over write from the first data area.
Press MENU to exit.
"PRESS [ENTER] TO OVERWRITE."
31
Download from Www.Somanuals.com. All Manuals Search And Download.
2)
RECORD SPEED: Record FPS setup
-1/30(1/30), 1/15(1/15), 1/10(1/10), 1/5 (1/5), 1/3 (1/3), 1/2 (1/2), 1(1), 2(2), 3(3.13), 5(5), 10 (8.33),
15(12.5), 30(25), 60(50), 120(100).
3)
4)
5)
6)
RECORD MODE: Record mode setup.
-ALWAYS / SCHEDULE / EVENT / EVENT ON SCHEDULE / EVENT + SCHEDULE
RECORD AUDIO: Audio record setup
-ON / OFF. (Suggest not fewer than 5 fps.)
QUALITY: Record image quality setup
- SUPER / HIGH / FINE / NORMAL / LOW
SCHEDULE SETUP
Press direction buttons up/down to choose item.
Press values change button to change values.
Additional:
2. RECORD SPEED. 1/30(1/30), 1/15(1/15), 1/10(1/10), 1/5 (1/5), 1/3 (1/3), 1/2 (1/2), 1(1), 2(2), 3(3.13), 5(5),
10 (8.33), 15(12.5), 30(25), 60(50), 120(100).
-120 is the maximum fps.
3. RECORD MODE. ALWAYS / SCHEDULE / EVENT / EVENT ON SCHEDULE / EVENT + SCHEDULE.
-Always: 24 hours recording.
-Schedule: Date and time schedule recording mode.
-Event: Alarm / Motion / V-Loss event mode recording. (Whatever which channel event, all channel record.)
-Event on schedule: Event record only on schedule time.
-Event + Schedule: Except event on schedule recording, it would still do record if event happens not on
schedule time.
Notice:
After record mode setup, user needs to press REC button to start. Set on Always mode, DVR do record if user
presses REC. Other record mode would ready on DVR idle status.
4. RECORD AUDIO: ON / OFF.
-Choose on, DVR would do audio recording.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
>SCHEDULE SETUP<
RECORD SETUP
1. HDD FULL
Press direction buttons up/down to
SCHEDULE items.
2. RECORD SPEED
3. RECORD MODE
4. RECORD AUDIO
5. QUALITY
Press values change button to change values.
6. SCHEDULE SETUP
7. CHANNEL SETUP
Factory default is everyday all schedules time on
recording.
SCHEDULE SETUP
CURSOR STEP
SUN
30MIN / 6MIN
MON
TUE
WED
THU
FRI
SAT
Press direction buttons up/down/left/right to see
date and time difference.
Press values change left/right button to change 30MIN or 6 MIN
++ / - - : Increase / Reduce. Every day record with factory default.
On
, use up/down button to choose date, press
button to change on
+ + or - -. After, use direction left / right button to start increase or reduce time area.
Mode function button
+ + increase
- - reduce
33
Download from Www.Somanuals.com. All Manuals Search And Download.
30MIN
SCHEDULE SETUP
CURSOR STEP
SUN
00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
00:30 01:30 02:30 03:30 04:30 05:30 06:30 07:30 08:30 09:30 10:30 11:30 12:30 13:30 14:30 15:30 16:30 17:30 18:30 19:30 20:30 21:30 22:30 23:30
MON
00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
00:30 01:30 02:30 03:30 04:30 05:30 06:30 07:30 08:30 09:30 10:30 11:30 12:30 13:30 14:30 15:30 16:30 17:30 18:30 19:30 20:30 21:30 22:30 23:30
TUE
00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
00:30 01:30 02:30 03:30 04:30 05:30 06:30 07:30 08:30 09:30 10:30 11:30 12:30 13:30 14:30 15:30 16:30 17:30 18:30 19:30 20:30 21:30 22:30 23:30
WED
00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
00:30 01:30 02:30 03:30 04:30 05:30 06:30 07:30 08:30 09:30 10:30 11:30 12:30 13:30 14:30 15:30 16:30 17:30 18:30 19:30 20:30 21:30 22:30 23:30
THU
00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
00:30 01:30 02:30 03:30 04:30 05:30 06:30 07:30 08:30 09:30 10:30 11:30 12:30 13:30 14:30 15:30 16:30 17:30 18:30 19:30 20:30 21:30 22:30 23:30
FRI
00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
00:30 01:30 02:30 03:30 04:30 05:30 06:30 07:30 08:30 09:30 10:30 11:30 12:30 13:30 14:30 15:30 16:30 17:30 18:30 19:30 20:30 21:30 22:30 23:30
SAT
00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
00:30 01:30 02:30 03:30 04:30 05:30 06:30 07:30 08:30 09:30 10:30 11:30 12:30 13:30 14:30 15:30 16:30 17:30 18:30 19:30 20:30 21:30 22:30 23:30
For example: TUE ~ SAT, all day schedule time recording, but SUN 07:00 ~ 22:00 and MON 01:30 ~ 11:30
do schedule recording. User can press ENTER to see the schedule time area difference.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
7. RECORD CHANNEL SETUP PAGE
RECORD CHANNEL SETUP PAGE
RECORD SETUP
1. HDD FULL
CH 01
CH 09
CH 10
CH 11
CH 12
CH 13
CH 14
CH 15
CH 16
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
2. RECORD SPEED
3. RECORD MODE
4. RECORD AUDIO
5. QUALITY
6. SCHEDULE SETUP
7. CHANNEL SETUP
MENU, ESC: EXIT:
: MODIFY
CH 01 : ON / OFF CH 09 : ON / OFF
CH 02 : ON / OFF CH 10 : ON / OFF
CH 03 : ON / OFF CH 11 : ON / OFF
CH 04 : ON / OFF CH 12 : ON / OFF
CH 05 : ON / OFF CH 13 : ON / OFF
CH 06 : ON / OFF CH 14 : ON / OFF
CH 07 : ON / OFF CH 15 : ON / OFF
CH 08 : ON / OFF CH 16 : ON / OFF
Press direction buttons up/down to choose item.
Press values change button to change values.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
4. PASSWORD SETUP
ADVANCED SETUP PAGE
1. ALARM SETUP
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
PASSWORD SETUP PAGE
1. LEVEL:(
2. ADMIN:(
3. USER :(
)
)
)
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
Press direction buttons up/down/left/right to
Choose items position.
1)
LEVEL (Log In level ID type setup)
>NONE / ADMIN / USER
-ADMIN
-USER
Press values change button to change values.
-NONE, user does not need to insert password before enter in MENU.
2)
3)
ADMIN password
>44444 (Factory Default)
Notice:
Password always 5 character input, cannot < 5 characters
USER password
>11111 (Factory Default)
Press direction buttons up/down/left/right to choose items position.
Press numeric (1 ~ 10 )button or remote controller ( 1 ~ 10 )to choose
Choose ADMIN: Only admin password can login advance menu.
Choose User: Both user and admin password can login menu but can not go advance menu.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
5. NETWORK SETUP
ADVANCED SETUP PAGE
TCP-IP SETUP PAGE
1. ALARM SETUP
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
1. SPEED:
2. IP TYPE : OFF
3. IP ADDR: xxx.xxx.xxx.xxx
4. GATEWAY: xxx.xxx.xxx.xxx
5. NETMASK: xxx.xxx.xxx.xxx
6. D.N.S 1: xxx.xxx.xxx.xxx
7. D.N.S 2: xxx.xxx.xxx.xxx
MAC ADDR: xx.xx.xx.xx.xx.xx
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
1. SPEED : >512K / 512K / 256K / 128K / 64K
2. IP TYPE: OFF
> OFF (Close network function) / STATIC (LAN / WAN)
3. IP ADDR: 192.168.192.250 (Factory Default)
4. GATEWAY: 192.168.192.001 (Factory Default)
5. NETMASK: 255.255.255.000 (Factory Default)
6. DNS 1: xxx.xxx.xxx.xxx
Press direction buttons up/down/left/right to
TCP-IP items position.
Press values change button to change values.
7. DNS 2: xxx.xxx.xxx.xxx
-MAC ADDR
XX.XX.XX. Machine number, user cannot change.
>Network Requirement: DVR can not go through IP sharing device, only HUB.
LAN (Local Area Network)
1)
DVR side input local IP address such as 192.168.192.5, or use the factory default IP.
2)
After DVR network setting, install the remote viewer to computer. Computer network IP also need to
setup on local IP address such as 192.168.192.6. DVR and computer IP address cannot equal.
>PCÆDVR: need a cross-link cable.
WAN (World Area Network)
1)User apply static IP from network company, then input IP Gateway, and Subnet mask address to DVR
TCP-UP setup.
2) Advice user apply network speed Upload 512K / Download 512K, to avoid image data too big influence
the remote quality. The network traffic jam always make data transfer slow, it is normal.
3) After DVR TCP-IP setup, install the remote viewer to computer. See the network page.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
6. HDD FORMAT
ADVANCED SETUP PAGE
Press direction buttons up/down to
HDD FORMAT items position.
Press ENTER to format all HDD.
1. ALARM SETUP
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
Caution: User can format HDD only when
all HDD stop record or playback.
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
Æ HDD FORMAT CAUTION!! :
** HDD FORMAT CAUTION!!**
ALL DATA IN HDD WILL BE
DESTROYED!!
Press ENTER button to format hard disk.
Press ESC button to cancel hard disk format
PRESS [ENTER] TO FORMAT.
PRESS [ESC] TO CANCEL.
Notice:
New hard disk detect: When DVR power, system would detect new hard disk install. If the hard disk is in
different format, then the message popup. User needs to press ENTER to format, if press MENU, and then
this hard disk would not be detected.
** NEW HDD CAUTION **"
"THE NEW HDD IS DETECTED."
Press FORMAT to format.
"FORMAT THE NEW HDD??"
Press MENU to exit.
"PRESS [ENTER] TO FORMAT."
MENU
"PRESS [MENU] TO CANCEL."
38
Download from Www.Somanuals.com. All Manuals Search And Download.
7. FACTORY DEFAULT
ADVANCED SETUP PAGE
1. ALARM SETUP
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
Press direction buttons up/down to
FACTORY DEFAULT items position.
Press ENTER to restore.
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
** CAUTION!! **
ALL SETUP VALUE WILL BE CLEAR,
AND RESTORE FACTORY DEFAULT!!
Press ENTER button to restore.
Press ESC button to cancel.
PRESS [ENTER] TO RESTORE.
PRESS [ESC] TO CANCEL.
8. SOFTWARE UPDATE
ADVANCED SETUP PAGE
1. ALARM SETUP
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
SOFTWARE UPDATE
UPDATE METHOD:
START UPDATE
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
UPDATE METHOD: USB / NETWORK
USB: Copy firmware to USB device, and then plug in DVR USB interface. Choose START UPDATE and then
press ENTER to start.
NETWORK: P2P. Press START UPDATE to link.
USB ERROR displays if no any USB device plug.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
USB Data Read and Networking
1. Windows 2000 / XP
2. Resolution 1024 x 768.
3. RAM up to 128 MB
4. Double click SETUP.EXE of CD, and then start to install.
5. Browse install path and then click Next.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Name chooses and then click Next.
6. Click create a desktop icon or not, and then click Next.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Click INSTALL to start install.
8. Click Launch Netviewer 163A and click Finish to done.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Click Setting.
Name: Name the IP address position.(Each name and IP saves every different input)
IP Addr: Input DVR IP address.
AVI codec: Not support currently. (Next version update.)
Video: Fullsize, Halfsize: Not support currently. (Next version update.)
NTSC, PAL. Frame/Sec: Not support currently. (Next version update.)
Click OK to confirm.
On Live / PlayBack 時, click DVR to save action pictures, *.DVR file. It needs this software to play.
Browser, Local record path could change. The path user changes is for .DVR save, *JPG file is always
C:\DVR
43
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Click Login, depends on limits of authority.
Factory ID is guest login. Input admin if you are a administer. Must input on little character.
Password, admin : 123456, guest : 123456. Password displays when log in, user just needs to input ID.
Guest log in, no PlayBack function authority.
Click OK, after about 5 seconds, admin login!! Message popup. And then click Connect to start.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Click Connect, after about 2 ~ 3 seconds to start connect LAN or WAN. Click Disconnect to stop.
If the NETWORK is connecting success, the blue light would keep glisten
Else, blue is always on light or not display, the connecting is failed.
Click live / PlayBack / BackPlay mode.
Live: DVR live watching.
PlayBack: Change to playback mode. After 2 ~3 seconds to change.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY: Click RUN around 2 ~ 30 seconds to start play first record. If over 30 seconds, cannot find any file or
network disconnect, Time out message popup. Please try again play or connect again. Click STOP to end
playback.
TIME LIST: Click RUN, time lists popup. On the item, double click it to start play, around 2 ~ 30 to start play
first record. If over 30 seconds, cannot find any file or network disconnect, Time out message popup. Please
try again play or connect again. Click STOP to end playback.
TIME SEARCH: Chose date and time, click RUN, around 2 ~ 30 seconds to start play first record. If over 30
seconds, cannot find any file or network disconnect, Time out message popup. Please try again play or
connect again. Click STOP to end playback.
Notice: PLAY / TIME LIST / TIME SEARCH change, needs to stop play first.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
12. BackupPlay:
- Click Open to choose file path.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Click Play to start backup data play. Click Stop to end. Click Pause to temporary stop playback. Click Resume
to restart.
Choose camera, click mouse right button. Camera 1 ~ 16 switches or reset all. Click Save “CamNo xx image .
/ save image all to save current image. Save path is C:\DVR.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Record Time Table: 80GB HD
Record Quality: Low. KB Range: Lowest: 13, Highest: 20. Average: 17.
REC FPS
REC Hour
REC FPS
REC Hour
REC FPS
REC Hour
120
21.7
5
60
21.7
3
30
43.5
15
87.1
10
130.7
1/2
2
1
261.4
1/3
435.7
1/5
653.5
1/10
1307.1
1/15
2614.3
1/30
4357.2
6535.9
13071.8
21786.4
43572.8
Record Quality: Normal. KB Range: Lowest: 14, Highest: 25. Average: 20.
REC FPS
REC Hour
REC FPS
REC Hour
REC FPS
REC Hour
120
18.5
5
60
18.5
3
30
37
15
74
10
111.1
1/2
2
1
222.2
1/3
370.3
1/5
555.5
1/10
11111.1
1111.1
1/15
18518.5
2222.2
1/30
3703.7
5555.5
37037
Record Quality: Fine. KB Range: Lowest: 15, Highest: 28. Average: 22.
REC FPS
REC Hour
REC FPS
REC Hour
REC FPS
REC Hour
120
16.8
5
60
16.8
3
30
33.6
2
15
67.3
1
10
101
1/2
202
1/3
336.7
1/5
505
1/10
10101
1010.1
1/15
16835
2020.2
1/30
3367
5050.5
33670
Record Quality: High. KB Range: Lowest: 17, Highest: 30. Average: 24.
REC FPS
REC Hour
REC FPS
REC Hour
REC FPS
REC Hour
120
15.4
5
60
15.4
3
30
30.8
2
15
61.7
1
10
92.5
1/2
185.1
1/3
308.6
1/5
462.9
1/10
9259.2
925.9
1/15
15432
1851.8
1/30
3086.4
4629.6
30864.1
Record Quality: Super. KB Range: Lowest: 19, Highest: 45. Average: 32.
REC FPS
REC Hour
REC FPS
REC Hour
REC FPS
REC Hour
120
11.5
5
60
11.5
3
30
23.1
2
15
46.2
1
10
69.4
1/2
138.8
1/3
231.4
1/5
347.2
1/10
6944.4
694.4
1/15
11574
1388.8
1/30
2314.8
3472.2
23148.1
49
Download from Www.Somanuals.com. All Manuals Search And Download.
VGA Description (Optional)
Accessories:
1. 20 PIN Male to Female D-SUB pin cable X 1
2. VGA PCB bracket X1
3. Screws X4
(Only fit on product serials Z7-00-VGA0-00)
1. VGA board introduction.
VGA connector
Socket
Resolution and NTSC/PAL switcher
3. Resolution and NTSC/PAL switcher table
Pin 4
Resolution
Pin 1
ON
Pin 2
ON
Pin 3
PAL -----ON
NTSC ---OFF
640X480 60HZ
800X600 60HZ
1024X768 60HZ
640X480 75HZ
800X600 75HZ
1024X768 75HZ
ON
ON
ON
OFF
ON
ON
OFF
OFF
ON
ON
OFF
ON
OFF
OFF
ON
OFF
Resolution and NTSC/PAL switcher description
Step. 1
Step. 2
Step. 3
Step. 4
DVR Power off
Pin 4 switcher to NTSC or PAL
DVR Power on
Pin 1 ~3 switcher resolution. It cannot be power off DVR.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional
Hard Disk x 2 can be installed on DVR base. Both are 2-iron slices immobile type.
2 Iron slices are in the accessories box, please tell supplier if slices are not exist
2-iron slices immobile type:
Slices immobile type: 4 screws hole on each slice. 2 for DVR base fixed. Another 2 for hard disk fixed.
Hard disk install.: Locking hard disk screws, then locking DVR base screws to fixed on.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
|