16 Channel Digital Video Recorder
User’s Manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
About this document
Before installing stand alone DVR, be sure to thoroughly review and follow the instructions in this Users
Manual. Pay particular attention to the parts that are marked NOTICE.
Also, when connecting with external application, first turn the power OFF and follow manual
instruction for appropriate installation.
Before reading this document
1. This document is intended for both the administrator and users of stand alone DVR Model.
2. This manual contains information for configuring, managing and using stand alone DVR Model.
3. To prevent fire or electrical shock, do not expose the product to heat or moisture
4. Be sure to read this manual before using stand alone DVR Model.
5. For questions and technical assistance of this product, contact your local dealer.
►Strong recommendation on installation of the DVR unit
1. Check electricity at the place you want to install the DVR unit is stable and meets our electricity
requirements.
Unstable electricity will cause malfunction of the unit or give critical damage to the unit.
2. Several chips on the main board of the DVR unit and hard disk drive inside the unit generate heat,
and it must be properly discharged.
Do not put any objects just beside exhaust port(fan) on the left side of the unit and do not close up an
opening (fresh air in-take) on the right side of the unit..
3. Put the DVR unit at well-ventilated place and do not put heat-generating objects on the unit.
When it is installed inside 19 inch mounting rack together with other devices, please check built-in
ventilation fan of the rack is properly running.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Content
Safety Precautions………………………………………………………………………………………………… 2
About this document………………………………………………………………………………………………. 3
Before reading this document……………………………………………………………………………………. 3
Unite Description of Front Panel………………………………………………………………………………… 5
Unit Description of Rear Panel……………………………………………………………………………………6
Installation………………………………………………………………………………………………………….. 7
Function Setup…………………………………………………………………………………………………….. 15
Login…………………………………………………………………………………………………………. 15
Basic Operation…………………………………………………………………………………………….. 16
USB Data Read and Networking………………………………………………………………………………... 39
Record Time Table: 80 GB HD………………………………………………………………………………….. 49
VGA Description (Optional) ……………………………………………………………………………………… 50
Additional…………………………………………………………………………………………………………….51
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Unit Description of Front Panel
16 / 9 / 4 split screen
1 ~ 16 full screen
Water Mark function
Freezer / Zoom / Sequence / Information / Audio
Menu button
MENU :
PLAY :
REC :
Play button
Record button
Key lock button
LOCK :
BACKUP :
T-SRH :
ESC :
Data back up button
Time search playback button
Function exit button
Value change button
Direction UP / Down,
Record and play stop,
Direction Left / Right
Playback forward or reverse.
Playback pause / steps.
ENTER
Remote controller IR
Function LED light display
Playback forward / reverse
Function item change shuttle.
USB. Data backup or firmware update
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Unit Description of Rear Panel
Power cord in 12V/5A, power switcher (ON / OFF)
Camera 1 ~ 16 in and
looping out
75 Ohm ON/OFF (high/low adjust)
Audio channel input x 1 and output x 1
Call Monitor. Channel sequence 1 ~ 16.
Main Monitor output
RS-485 control keyboard connector
S-Video (Y/C) monitor
VGA output. PC monitor connector.
(Optional)
VGA
RS-232 connector (ISP. For RD control)
Alarm connector
LAN
Call Monitor. Channel sequence 1 ~ 16.
Stop on full channel when event happens.
Notice: Reboot DVR after installing any device.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Procedure
1) Camera Connection
DC
LEVEL
V.P
Connect the camera to the CAMERA INPUT
on the Rear Panel of the 16 CH DVR.
VIDEO
CH4
CH4
CH1
CH1
CH2
CH2
CH3
CH3
DC
MONITOR
VIDEO
LENS
AC24V/DC12
Rear part of CAMERA
2) Monitor Connection (Composite Connection
Method)
CH4
CH1
CH1
CH2
CH2
CH3
MONITOR
CH3
CH4
Connect the monitor to the MONITOR OUT on
the Rear Panel of the 16 CH DVR.
VIDEO
OUT
A
IN
3) Monitor Connection
CH4
CH1
CH2
CH3
Connect S-VIDEO Monitor to MONITOR OUT
on the Rear Panel of the 16 CH DVR.
4) Sensor Connection
Connect the Sensor to the SENSOR INPUT/
OUTPUT on the Rear Panel of the system
13,12,11,10,9,8,7,6,5,4,3,2,1
25,24,23,22,21,20,19,18,17,16,15,14
◆Relay output : COM+NC, COM+NO
◆Alarm input : Short-circuit between Alarm1 ~ 16 and GND is recognized as alarm by default.
Alarm 1 ~ 16 will be corresponding to Camera 1 ~ 16.
NC = Normal Close. NO = Normal Open.
7
NOTICE: Sensor input is RECOGNIZED as LOW when alarm signal is on a level with GND, and it is
recognized as HIGH when alarm signal is FLOATING or 5V. Following is internal circuit.
5
V
Internal Circuit
D1
Thus, there is a danger of damage, when the sensor input goes to a Negative level or voltage higher than 5V.
5) Network Connection
DVR connects to LAN
ETHERNET
rks
TERATRAY CONNECTION
◆To view video image on the computer through internet with DVR view software.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
5) HDD connection
1
How to connect single HDD
2
How to connect 2 HDD
I/O BOARD
I/O BOARD
1
2
1
2
2
1
MASTER
HDD1
tie
3
MASTER
HDD
MAIN BOARD
MAIN BOARD
3
SLAVE
HDD2
3
Set the drive jumpers as specified by hard disk drive manufacturer.
Set the drive jumpers as specified by hard disk drive manufacturer.
1. Make sure the HDD is MASTER.
2. Make sure the cable connector is
correct.
1. Make sure the HDD is MASTER and
SLAVE.
2. Make sure the cable connector is
correct.
3. Please check the HDD panel for
Master set up.
3. Please check the HDD panel for
Master and Slave set up.
Notice:
-Hard Disk Master and Slave jumper pin must right, otherwise it makes DVR work fault.
Hard Disk testing table:
Brand
Seagate
IBM
Model
Barracuda
DeskStar
Caviar
Capacity
80 GB
Notice
80 GB
WD2000
Hitachi
Maxtor
200 GB
80 GB
DeskStar
MaxLineII
300 GB
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture
Full screen or split screen display
Press
button, to display 16 / 9 / 4 quarterly split screen.
Press numeric buttons
to display the desired camera image in full screen.
1.) FREEZE Mode
1. In live mode press
(FREEZE) button to freeze image.
2. Press
again to cancel freeze mode.
2.) Zoom Mode(Display Enlargement.)
Go to full screen mode with numeric buttons at live or playback
mode, then press ZOOM button to display screen Enlargement.
Use
button to move position.
3.) Auto Mode
Press
(AUTO) button to start screen auto sequencing, and press it again to cancel auto mode.
4.) W.MARK. Water Mark mode.
Water Mark on to check if the data has modify.
5.) INFO (System Information). Auto disappear after 2 minutes if no any button operating.
** SYSTEM INFORMATION **
1. Network IP address
1.IP ADDR:
2. Network IP gateway
2.GATEWAY:
3. Network IP netmask
3.NETMASK:
4. Network user amount
4.NET USER:
5. Hard disk capacity
5.HDD SIZE:
6. Hard disk used percentage
6.HDD USED:
7. First hard disk status
7.STATUS1
8. Video format
8.STATUS2
9. System running time
9.UPTIME
10. System version
10.VERSION:
10
Download from Www.Somanuals.com. All Manuals Search And Download.
6.) BACKUP. Image backup mode.(Image back up must be done on playback mode only.)
Locate the playback point of which you want. Press BACKUP, back up menu shows:
CDRW / USB
CDRW
BACKUP MENU
USB
BACKUP MENU
BACKUP MENU
CDR WRITE SPEED
START BACKUP TO CDR
FORMAT USB
CDR WRITE SPEED x1,x2,x3
START BACKUP TO CDR
FORMAT USB
START BACKUP TO USB
START BACKUP TO USB
USB:
The BACKUP CAUTION window pop-up. Press ENTER to begin data back up. Capacity of USB device is not
limit.
On playback mode, presses BACKUP:
Lower-Right corner of the screen:
** BACKUP CAUTION **
THE ORIGINAL BACKUP FILE
WILL BE KILLED.
PRESS [ENTER] TO BACKUP.
PRESS [BACKUP] TO CANCEL.
xxx K
xxx K (Presently back up progress)
Important:
If DVR cannot detect USB device, please format it to FAT or FAT 32 on PC OS.
When the file is opened from a CF card, only DVR images will appear, but without sounds.
Additional:
During playback, USB device is full or user press BACKUP button screen display a “PAUSE” caption, User
takes out the USB device to computer USB slot then save data to hard disk. After re-insert USB device to
DVR slot, user press BACKUP again. Press ENTER to continue backup or backup button to cancel.
** BACKUP CAUTION **
PAUSE
THE ORIGINAL BACKUP FILE
WILL BE KILLED.
PRESS [ENTER] TO BACKUP.
PRESS [BACKUP] TO CANCEL.
PS: NetViewer software auto copied to USB device when data backup. See the USB Data Read and
Networking pages.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Compatible USB: Transcend 256 MB, 1 GB / A-DATA, 512MB / USB Flash Drive 128 MB /
Intelligent Stick 256 MB / SOLOMON 128 MB / ISTEC 1GB.
CD-RW:
xxx K (Presently back up progress)
Press BACKUP to stop saving. Or wait for CD is full done.
Data only read in Netviewer.
xxx K
7.) Key Lock function
>On the Live mode, press
(lock), Only, numeric, freeze, auto, and zoom buttons could work.
Press lock key again to enter the login-in window. Enter admin or user password to unlock.
Key lock function only accept password correct log in even re-boot DVR power.
8.) AUDIO function ))))
))))
xxxxxxxxx
Audio playback: AUD (Audio),
)))))))displays on the Upper-left of screen. At that time, audio
will playback. Press it again to turn it off.
Notice
Audio playback only on normal( x 1 ) playback.
9. NETWORK Playing
NETWORK PLAYING
PASSWORD : (*****)
ENTER PASSWORD TO TERMINATE
1. When the admin do playback mode on AP (Net Viewer), user can terminate it after into password of DVR.
On AP client, admin needs to connect again.
2. When AP on playback mode, DVR is on playback mode also.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
1. Playback Mode
PLAY
1) Press
button to begin playback. (System playback the images backward)
MAIN PLAY PAGE
2. T-SRH button
1) T-SRH: Playback by time search.
1.MASTER TIME LIST
2.SLAVE TIME LIST
3.MASTER EVENT LIST
4.SLAVE EVENT LIST
5.GOTO DATE: 2004/12/31
6.GOTO TIME: 12:12
7.GOTO PLAY
Press T-SRH button to active playback function.
Press direction button
UP/DOWN to choose
items.
1) TIME LIST (Playback image by Time-Search): Recorded images list (by hours)
TIME LIST
Y / M / D H : M
Y / M / D H : M
Y / M / D H : M (Beginning of recording time)
Every playback data list displays by an hour.
Y / M / D H : M (End of recording time)
No page display limit. 10 items display on each page.
Press direction button UP/DOWN to choose items.
Press values change button to change to previous / next page.
Notice:
Every playback data list displays by an hour, but if user finds out like:
1. 10:00 ~ 10:12
2. 10:12 ~ 11:00
Reason: 1. Hard disk is full. 2. User change record mode setup.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2) EVENT LIST (Alarm List): Event source- Video loss / Alarm trigger / Motion / Record
EVENT LIST +10
NO Y / M / D H : M CH EVENT
10 items display on each page / Total 5000 items display for 500 pages. When event list is out of compass,
the total items are less then 5000.
NO Y / M / D H : M CH EVENT
>Event happens time and list.
CH: Event Channel Display.
>1 CH ~ 16 CH
+10 : Display pages by 10 units / +100 : Display pages by 100 units / +1000 : Display pages by 1000 units.
- Press direction button left and right to change +10 / +100 / +1000
Event type.
>Includes Motion / Alarm / V-Loss / Record / Power On / Event Full / Network (Network total users,
include log in and log out.)
Press direction button UP/DOWN to choose items.
Press
values change button to change page. Press ENTER to start
playback.
>Special time search playback:
Go TO DATE：２００２／１２／１２
-Choose year / month / day
>Press direction button Left / Right to choose items, press values change button
GOTO TIME：１２：１２
to change value.
to change value.
-Choose hour and minute
>Press direction button Left / Right to choose items, press values change button
GOTO PLAY
-Press ENTER button to start playback.
Notice: Playback speed change by
or shuttle. Speed is x 1, x 2, x 4, x 8, x 16.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Setup
LOGIN
MENU
1) Press
button to enter into menu. You could do the system function setup in MENU.
2) Password enter window pop-up:
CHECK PASSWORD MENU
PASSWORD (*****)
Default password (Account-Admin) : 44444
Default password (Account-User) : 11111
3) Press numeric (1 ~ 10 )button or remote controller ( 1 ~ 10 )to choose password.
4) Remote controller function buttons are same as DVR panel function buttons.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Press MENU button to enter MAIN SETUP PAGE.
MAIN SETUP PAGE
1. HDD INFORMATION
2. DATE-TIME SETUP
3. DISPLAY SETUP
4. CAMERA SETUP
5. BUZZER
6. RELAY
SETUP
SETUP
SETUP
7. SYSTEM
8. ADVANCED SETUP
MENU, ESC: EXIT, ENTER: RUN
1) Use direction button up/down
button to select setup item.
2) Press (ENTER) button to enter into sub-menu function setup.
3) Press sub-menu item with direction button up/down
or left/right
button.
And change the value with
values change button or turn inner-shuttle.
4) Press ESC to go back to main / sub menu or exit menu.
Notice:
1. ADMIN level can setup all DVR menu functions.
2. USER level cannot setup ADVANCED page of DVR main menu function.
3. Auto disappear after 4 minutes if no any button operating.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
1. HDD INFORMATION
MAIN SETUP PAGE
1. HDD INFORMATION
2. DATE-TIME SETUP
3. DISPLAY SETUP
4. CAMERA SETUP
POSITION SIZE USED BRAND
MASTER
LAST TIME
SLAVE
5. BUZZER
6. RELAY
SETUP
SETUP
SETUP
LAST TIME
7. SYSTEM
MENU, ESC: EXIT,
:PAGE
8. ADVANCED SETUP
MENU, ESC: EXIT, ENTER: RUN
- 2 hard disk information display.
Information display: POSITION SIZE USED BRAND
>POSITON: Master / Slave
>SIZE: Hard Disk capacity. xxGB. Maximum display is 999MB
>USED: 00 ~ 100 %. Hard disk overwrites 100 ~ 199 %.
>BRAND: DVR auto detect hard disk brand.
>LAST TIME: The last record time display.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
2. DATE-TIME SETUP
MAIN SETUP PAGE
1. HDD INFORMATION
2. DATE-TIME SETUP
3. DISPLAY SETUP
4. CAMERA SETUP
DATE-TIME SETUP PAGE
1. DATE 2000 / 00 / 00
2. TIME
3. FORMAT
5. BUZZER
6. RELAY
SETUP
SETUP
SETUP
3. DISPLAY AT xx LINE(S)
7. SYSTEM
MENU, ESC:EXIT,
:MODIFY
8. ADVANCED SETUP
MENU, ESC: EXIT, ENTER: RUN
1. DATE
2. TIME: > Use direction button up/down choose position, values change button to change date and time
values. Do not need to stop hard disk working (Play or record).
3. FORMAT:
YY/MM/DD, MM/DD/YY, DD/MM/YY, YY/ENG/DD, ENG/DD/YY, DD/ENG/YY, YYYY/MM/DD,
MM/DD/YYYY, DD/MM/YYYY, YYYY/ENG/DD, ENG/DD/YYYY, DD/ENG/YYYY.
Y=Year. M=Month. D=Day. ENG=Month display in English.
4. DISPLAY AT xx LINE(S)
-Date and Time position on screen xx line(s). 00 ~ 23.
-. Day and time change
Press direction button up/down/left/right to choose items or move date-time position.
Press
values change button to change values.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
3. DISPLAY SETUP
MAIN SETUP PAGE
1. HDD INFORMATION
2. DATE-TIME SETUP
DISPLAY SETUP PAGE
1. DATE-TIME
ON
ON
ON
ON
3. DISPLAY
SETUP
2. CAMERA TITLE
3. PB DATE-TIME
4. PB CAMERA TITLE
4. CAMERA SETUP
5. BUZZER
6. RELAY
SETUP
SETUP
SETUP
5. PB DUMMY CAMERA STAY
7. SYSTEM
6. DVR STATUS
ON
8. ADVANCED SETUP
7. BORDER COLOR
WHITE
MENU, ESC: EXIT, ENTER: RUN
MENU, ESC:EXIT,
:MODIFY
1. DATE-TIME: Date and Time caption display mode on or off setup.
>ON / OFF
2. CAMERA TITLE: Camera Title caption display mode on or off setup.
>ON / OFF
3. PB DATE-TIME: Play back date and time caption display mode on or off setup.
>ON / OFF
4. PB CAMERA TITLE: Play back camera title caption display mode on or off setup.
>ON / OFF
5. PB DUMMY CAMERA: To clear dummy image if channel input not up to 16.
>STAY / CLEAR
6. DVR STATUS: DVR system, record, playback, audio caption display mode on or off setup.
>ON / OFF
7. BORDER COLOR: Border color WHITE / DARK / BLACK / GRAY.
Press direction button up/down to choose the desired item.
Press
values change button to change values.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
4. CAMERA SETUP
MAIN SETUP PAGE
CAMERA SETUP PAGE
1. COLOR SETUP
1. HDD INFORMATION
2. DATE-TIME SETUP
3. DISPLAY SETUP
4. CAMERA SETUP
2. TITLE SETUP
3. SCREEN POSITION SETUP
4. V-LOSS DISPLAY SETUP
5. VIDEO MASK SETUP
5. BUZZER
6. RELAY
SETUP
SETUP
SETUP
7. SYSTEM
MENU, ESC: EXIT, ENTER: RUN
8. ADVANCED SETUP
MENU, ESC: EXIT, ENTER: RUN
COLOR SETUP PAGE
** CHANNEL NUMBER 01
1. BRIGHTNESS 00
(1.) COLOR SETUP
CAMERA SETUP
2. CONTRAST
3. SATURATION
4. HUE
00
00
00
00
1. COLOR SETUP
2. TITLE SETUP
3. SCREEN POSITION SETUP
4. V-LOSS DISPLAY SETUP
5. VIDEO MASK SETUP
5. GAIN
>>DEFAULT RESET<<
MENU,ESC:EXIT,
:MODIFY
COLOR SETUP : Adjust Camera Image. Only on live mode adjustable.
CHANNEL NUMBER
BRIGHTNESS
CONTRAST
SATURATION
HUE
: Select camera 01 ~ 16
: Adjust screen brightness
: Adjust color contrast
(-27~ +30)
(-18~ +40)
(-40~ +14)
(-24~ +24)
(-29~ +39)
: Adjust color saturation
: Adjust color hue
GAIN
: Adjust image signal level
>>DEFAULT RESET<< : Press ENTER button to reset DVR values.
Press direction button up/down to choose items.
Press
values change button to change values.
>Right adjustment of each element in COLOR setup will increase picture quarterly displayed. We recommend
you to adjust each element of COLOR SETUP for cameras and monitor to be connected to the DVR unit.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
(2.) TITLE SETUP: Input TITLE of each camera. 8 characters can be input.
TITLE SETUP PAGE
CH 01 (01
CH 02 (02
CH 03 (03
CH 04 (04
CH 05 (05
CH 06 (06
CH 07 (07
CH 08 (08
)
)
)
)
)
)
)
)
CH 09 (09
CH 10 (10
CH 11 (11
CH 12 (12
CH 13 (13
CH 14 (14
CH 15 (15
CH 16 (16
)
)
CAMERA SETUP
1. COLOR SETUP
)
2. TITLE SETUP
)
)
)
)
)
3. SCREEN POSITION SETUP
4. V-LOSS DISPLAY SETUP
5. VIDEO MASK SETUP
MENU, ESC: EXIT:
: MODIFY
Press direction button up/down/left/right to choose items and position.
Press
values change button to change values.
Characters choose:
Space:
Numeric: 0 / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9
Capital letter: A / B / C / D / E / F / G / H / I / J / K / L / M / N / O / P / Q / R / S / T / U / V / W / X / Y / Z
a / b / c / d / e / f / g / h / I / j / k / l / m / n / o / p / q / r / s / t / u / v / w / x / y / z
21
Download from Www.Somanuals.com. All Manuals Search And Download.
(3.) SCREEN POSITION SETUP
**** SCREEN POSITION****
UP
CAMERA SETUP
1. COLOR SETUP
LEFT
RIGHT
2. TITLE SETUP
3. SCREEN POSITION SETUP
4. V-LOSS DISPLAY SETUP
5. VIDEO MASK SETUP
DOWN
ENTER : DEFAULT
ESC : QUIT
1.
Press direction buttons up/down/left/right to move screen position.
2. Press ENTER button for default.
3. Press ESC button to quit.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
(4.) V-LOSS DISPLAY SETUP
VLOSS SETUP PAGE
**V-LOSS FUNCTION:
CAMERA SETUP
1. COLOR SETUP
2. TITLE SETUP
CH 01 : ON CH 09 : ON
CH 02 : ON CH 10 : ON
CH 03 : ON CH 11 : ON
CH 04 : ON CH 12 : ON
CH 05 : ON CH 13 : ON
CH 06 : ON CH 14 : ON
CH 07 : ON CH 15 : ON
CH 08 : ON CH 16 : ON
3. SCREEN POSITION SETUP
4. V-LOSS DISPLAY SETUP
5. VIDEO MASK SETUP
MENU, ESC: EXIT:
: MODIFY
** V-LOSS FUNCTION: ON / OFF
CH 01 : ON / OFF CH 09 : ON / OFF
CH 02 : ON / OFF CH 10 : ON / OFF
CH 03 : ON / OFF CH 11 : ON / OFF
CH 04 : ON / OFF CH 12 : ON / OFF
CH 05 : ON / OFF CH 13 : ON / OFF
CH 06 : ON / OFF CH 14 : ON / OFF
CH 07 : ON / OFF CH 15 : ON / OFF
CH 08 : ON / OFF CH 16 : ON / OFF
PS. If choose on, X icon displays beside camera title.
Press direction buttons up/down/left/right to choose items.
Press values change button to change values.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
(5.) VIDEO MASK SETUP
VIDEO MASK SETUP PAGE
**VIDEO MASK FUNCTION:
CH 01
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
CH 12
CH 13
CH 14
CH 15
CH 16
CAMERA SETUP
1. COLOR SETUP
2. TITLE SETUP
3. SCREEN POSITION SETUP
4. V-LOSS DISPLAY SETUP
5. VIDEO MASK SETUP
MENU, ESC: EXIT:
: MODIFY
**VIDEO MASK FUNCTION: ON / OFF
CH 01 : ON / OFF CH 09 : ON / OFF
CH 02 : ON / OFF CH 10 : ON / OFF
CH 03 : ON / OFF CH 11 : ON / OFF
CH 04 : ON / OFF CH 12 : ON / OFF
CH 05 : ON / OFF CH 13 : ON / OFF
CH 06 : ON / OFF CH 14 : ON / OFF
CH 07 : ON / OFF CH 15 : ON / OFF
CH 08 : ON / OFF CH 16 : ON / OFF
MASK means the channel would not display on the live screen, but still can set it on recording.
Press direction buttons up/down/left/right to choose items.
Press values change button to change values.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
5. BUZZER SETUP
MAIN SETUP PAGE
BUZZER SETUP PAGE
**BUZZER FUNCTION
BUTTON BUZZER
1. HDD INFORMATION
2. DATE-TIME SETUP
3. DISPLAY SETUP
4. CAMERA SETUP
ON
ON
ALARM
MOTION BUZZER
V-LOSS BUZZER
HDD-FULL BUZZER
CRASH BUZZER
BUZZER
ON
ON
ON
ON
ON
5. BUZZER
6. RELAY
SETUP
SETUP
SETUP
7. SYSTEM
8. ADVANCED SETUP
MENU, ESC: EXIT:
: MODIFY
MENU, ESC: EXIT, ENTER: RUN
**BUZZER FUNCTION: All buzzer function
>ON / OFF
1. BUTTON BUZZER?
> ON / OFF
2. ALARM BUZZER?
> ON / OFF
3. MOTION BUZZER?
> ON / OFF
4. VLOSS BUZZER?
> ON / OFF
5. HDD-FULL?
> ON / OFF (Buzzer on if hard disk record only once(Record setupꢀ HDD FULLꢀSTOP REC.)
6. CRASH?
> ON / OFF (Buzzer on if DVR system or hard disk crash.)
Press direction buttons up/down to BUZZER SETUP items.
Press values change button to change values.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
6. RELAY SETUP
MAIN SETUP PAGE
1. HDD INFORMATION
2. DATE-TIME SETUP
3. DISPLAY SETUP
4. CAMERA SETUP
RELAY SETUP PAGE
**RELAY FUNCTION: ON
1. ALARM
2. MOTION
3. V-LOSS
RELAY:
RELAY:
RELAY:
ON
ON
ON
ON
ON
5. BUZZER
6. RELAY
SETUP
SETUP
SETUP
4. HDD-FULL RELAY:
5. CRASH RELAY:
7. SYSTEM
8. ADVANCED SETUP
MENU, ESC: EXIT, ENTER: RUN
**RELAY FUNCTION: ON / OFF
1. ALARM
2. MOTION
3. VLOSS
RELAY:
RELAY:
RELAY:
ON / OFF
ON / OFF
ON / OFF
4. HDD FULL RELAY:
ON / OFF (Relay on if hard disk record only once.)
Record setupꢀ HDD FULLꢀSTOP REC.
5. CRASH
RELAY:
ON / OFF (Relay on if DVR system or hard disk crash.)
Press direction buttons up/down to each item.
Press values change button to change values.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
7. SYSTEM SETUP
MAIN SETUP PAGE
SYSTEM SETUP
1. DWELL INTERVAL
2. LANGUAGE
1. HDD INFORMATION
2. DATE-TIME SETUP
3. DISPLAY SETUP
4. CAMERA SETUP
3. VIDEO INPUT
4. RS-485 ID
5. BUZZER
6. RELAY
SETUP
SETUP
SETUP
5. RS-485 PROTOCOL
6. RS-485 BAUD RATE
7. SYSTEM
UPTIME: xx HRS
MENU, ESC: EXIT: : MODIFY
8. ADVANCED SETUP
MENU, ESC: EXIT, ENTER: RUN
SYSTEM SETUP
1. DWELL INTERVAL:
- 0 ~ 999SEC. Full channel and call monitor auto sequence time.
2. LANGUAGE:
-
-
ENGLISH / CHINESE / JAPANESE / FRENCH / RUSSIAN / POLISH / ITALIAN / SPANISH
After change language, user needs to exit menu. Language would change next time back to menu.
3. VIDEO INPUT: NTSC / PAL system detection.
-
-
AUTO / NTSC / PAL
User needs to re power on after change.
4. RS-485 ID:
- 01 ~ 16
5. RS-485 PROTOCOL
- KEYBOARD / LILIN / PELCO-P / PELCO-D / NICECAM / DENTEC-D / DENTEC-P
6. RS-485 BAUD RATE
- 1200 / 2400 / 4800 / 9600
-UPTIME: xx HRS. This means the total system working time after DVR first power on.
RS-485 ID and protocol is the command for system control keyboard. If user has no keyboard to
control then does not have to care.
Press direction buttons up/down to choose items.
Press values change button to change values.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
8. ADVANCED SETUP
MAIN SETUP PAGE
ADVANCED SETUP PAGE
1. ALARM SETUP
1. HDD INFORMATION
2. DATE-TIME SETUP
3. DISPLAY SETUP
4. CAMERA SETUP
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
5. BUZZER
6. RELAY
SETUP
SETUP
SETUP
7. SYSTEM
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
8. ADVANCED SETUP
MENU, ESC: EXIT, ENTER: RUN
ADVANCED SETUP PAGE
ALARM SETUP PAGE
1. ALARM
SETUP
1. ALARM FUNCTION
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
2. ALARM DURATION
3. ALARM RELAY SETUP
4. ALARM POLARITY SETUP
MENU, ESC: EXIT:
: MODIFY
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
1. Alarm function: ON / OFF. Alarm function on or off depends on alarm device includes in DVR system.
2. Alarm duration: 0 ~ 9999. Alarm buzzer and record duration time.
ALARM RELAY SETUP
>ALARM 01 ~ ALARM 16: ON / OFF
Even choose on, but RELAY SETUPꢀAlarm relay or relay function off, this function is still closed.
ALARM POLARITY SETUP
>ALARM 01 ~ ALARM 16: N.O. / N.C. / OFF
Press direction buttons up/down to choose items.
Press values change button to change values.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
2. MOTION SETUP
MOTION SETUP PAGE
**MOTION FUNCTION ON
**MOTION DURATION
**CHANNEL NUMBER
1. SENSITIVITY
ADVANCED SETUP PAGE
1. ALARM SETUP
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
2. VELOCITY
3. ACTIVATION
4. RELAY
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
5. MOTION AREA SETUP
MENU, ESC: EXIT:
: MODIFY
MOTION SETUP
**MOTION FUNCTION (For all channels)
-ON / OFF
**MOTION DURATION
-0 ~ 9999. Motion buzzer and record duration time.
**CHANNEL NUMBER
-CH 01 ~ 16
1. SENSITIVITY Adjusts motion Detection Sensitivity.
-1 ~ 32 (low ꢀhigh)
2. VELOCITY Adjusts motion object slow /fast speed detection
-1 ~ 10 (slow speedꢀfast speed)
3. ACTIVATION (For each channel)
-ON / OFF. The function only for channel motion detect active, not for motion record per each.
4. RELAY
-ON / OFF
Even choose on, but RELAY SETUPꢀMotion relay or relay function off, this function is still closed.
5. >MOTION AREA SETUP<
Press direction buttons up/down to choose items.
Press values change button to change values.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
> MOTION AREA SETUP <
All area detect with factory default. Press ENTER button to change mode and then increase or reduce.
For example:
Clear lattices
Press value change button to reduce.
Add lattices
Press value change button to reduce.
Icon:
Press
to increase all area, press
to reduce all area.
Icon:
Press Up / Down / Left / Right direction key to move, press
Icon: +
to increase lattices; press
to reduce lattices.
Press Up / Down / Left / Right direction key to move and increase area.
Icon: X
Press Up / Down / Left / Right direction key to move and reduce area.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
3. RECORD SETUP
RECORD SETUP
1)
HDD FULL: When hard disk is full, DVR next step is kept overwrite record or stop record?
-OVERWRITE / STOP REC
31
2)
RECORD SPEED: Record FPS setup
-1/30(1/30), 1/15(1/15), 1/10(1/10), 1/5 (1/5), 1/3 (1/3), 1/2 (1/2), 1(1), 2(2), 3(3.13), 5(5), 10 (8.33),
15(12.5), 30(25), 60(50), 120(100). NTSC / (PAL)
RECORD MODE: Record mode setup.
3)
4)
5)
6)
-ALWAYS / SCHEDULE / EVENT / EVENT ON SCHEDULE / EVENT + SCHEDULE
RECORD AUDIO: Audio record setup
-ON / OFF. (Suggest not fewer than 5 fps.)
QUALITY: Record image quality setup
- SUPER / HIGH / FINE / NORMAL / LOW
SCHEDULE SETUP
Press direction buttons up/down to choose item.
Press values change button to change values.
Additional:
2. RECORD SPEED. 1/30(1/30), 1/15(1/15), 1/10(1/10), 1/5 (1/5), 1/3 (1/3), 1/2 (1/2), 1(1), 2(2), 3(3.13), 5(5),
10 (8.33), 15(12.5), 30(25), 60(50), 120(100).
-120 is the maximum fps. Full screen playback with 120 frames per each.
Split screen playback with 60 frames.
3. RECORD MODE. ALWAYS / SCHEDULE / EVENT / EVENT ON SCHEDULE / EVENT + SCHEDULE.
-Always: 24 hours recording.
-Schedule: Date and time schedule recording mode.
-Event: Alarm / Motion / V-Loss event mode recording. (Whatever which channel event, all channel record.)
-Event on schedule: Event record only on schedule time.
-Event + Schedule: Except event on schedule recording, it would still do record if event happens not on
schedule time.
Notice:
After record mode setup, user needs to press REC button to start. Set on Always mode, DVR do record if user
presses REC. Other record mode would ready on DVR idle status.
4. RECORD AUDIO: ON / OFF.
-Choose on, DVR would do audio recording.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
>SCHEDULE SETUP<
RECORD SETUP
1. HDD FULL
Press direction buttons up/down to
SCHEDULE items.
2. RECORD SPEED
3. RECORD MODE
4. RECORD AUDIO
5. QUALITY
Press values change button to change values.
6. SCHEDULE SETUP
7. CHANNEL SETUP
Factory default is everyday all schedules time on
recording.
SCHEDULE SETUP
CURSOR STEP
SUN
30MIN / 6MIN
MON
TUE
WED
THU
FRI
SAT
Press direction buttons up/down/left/right to see
date and time difference.
Press values change left/right button to change 30MIN or 6 MIN
++ / - - : Increase / Reduce. Every day record with factory default.
On
, use up/down button to choose date, press
button to change on
+ + or - -. After, use direction left / right button to start increase or reduce time area.
Mode function button
+ + increase
- - reduce
33
Download from Www.Somanuals.com. All Manuals Search And Download.
30MIN
SCHEDULE SETUP
CURSOR STEP
SUN
00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
00:30 01:30 02:30 03:30 04:30 05:30 06:30 07:30 08:30 09:30 10:30 11:30 12:30 13:30 14:30 15:30 16:30 17:30 18:30 19:30 20:30 21:30 22:30 23:30
MON
00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
00:30 01:30 02:30 03:30 04:30 05:30 06:30 07:30 08:30 09:30 10:30 11:30 12:30 13:30 14:30 15:30 16:30 17:30 18:30 19:30 20:30 21:30 22:30 23:30
TUE
00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
00:30 01:30 02:30 03:30 04:30 05:30 06:30 07:30 08:30 09:30 10:30 11:30 12:30 13:30 14:30 15:30 16:30 17:30 18:30 19:30 20:30 21:30 22:30 23:30
WED
00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
00:30 01:30 02:30 03:30 04:30 05:30 06:30 07:30 08:30 09:30 10:30 11:30 12:30 13:30 14:30 15:30 16:30 17:30 18:30 19:30 20:30 21:30 22:30 23:30
THU
00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
00:30 01:30 02:30 03:30 04:30 05:30 06:30 07:30 08:30 09:30 10:30 11:30 12:30 13:30 14:30 15:30 16:30 17:30 18:30 19:30 20:30 21:30 22:30 23:30
FRI
00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
00:30 01:30 02:30 03:30 04:30 05:30 06:30 07:30 08:30 09:30 10:30 11:30 12:30 13:30 14:30 15:30 16:30 17:30 18:30 19:30 20:30 21:30 22:30 23:30
SAT
00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
00:30 01:30 02:30 03:30 04:30 05:30 06:30 07:30 08:30 09:30 10:30 11:30 12:30 13:30 14:30 15:30 16:30 17:30 18:30 19:30 20:30 21:30 22:30 23:30
For example: TUE ~ SAT, all day schedule time recording, but SUN 07:00 ~ 22:00 and MON 01:30 ~ 11:30
do schedule recording. User can press ENTER to see the schedule time area difference.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
7) RECORD CHANNEL SETUP PAGE
RECORD CHANNEL SETUP PAGE
RECORD SETUP
1. HDD FULL
CH 01
CH 09
CH 10
CH 11
CH 12
CH 13
CH 14
CH 15
CH 16
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
2. RECORD SPEED
3. RECORD MODE
4. RECORD AUDIO
5. QUALITY
6. SCHEDULE SETUP
7. CHANNEL SETUP
MENU, ESC: EXIT:
: MODIFY
CH 01 : ON / OFF CH 09 : ON / OFF
CH 02 : ON / OFF CH 10 : ON / OFF
CH 03 : ON / OFF CH 11 : ON / OFF
CH 04 : ON / OFF CH 12 : ON / OFF
CH 05 : ON / OFF CH 13 : ON / OFF
CH 06 : ON / OFF CH 14 : ON / OFF
CH 07 : ON / OFF CH 15 : ON / OFF
CH 08 : ON / OFF CH 16 : ON / OFF
PS. Choose off if no video input channel or which channel would not do record.
According to channel record, record time would different.
Press direction buttons up/down to choose item.
Press values change button to change values.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
4. PASSWORD SETUP
ADVANCED SETUP PAGE
1. ALARM SETUP
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
PASSWORD SETUP PAGE
1. LEVEL:(
2. ADMIN:(
3. USER :(
)
)
)
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
Press direction buttons up/down/left/right to
Choose items position.
1)
LEVEL (Log In level ID type setup)
>NONE / ADMIN / USER
-ADMIN
-USER
Press values change button to change values.
-NONE, user does not need to insert password before enter in MENU.
2)
3)
ADMIN password
>44444 (Factory Default)
Notice:
Password always 5 character input, cannot < 5 characters
USER password
>11111 (Factory Default)
Press direction buttons up/down/left/right to choose items position.
Press numeric (1 ~ 10 )button or remote controller ( 1 ~ 10 )to choose
Notice:
1. ADMIN level can setup all DVR menu functions.
2. USER level cannot setup ADVANCED page of DVR main menu function.
3. Auto disappear after 4 minutes if no any manual operate.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
5. NETWORK SETUP
ADVANCED SETUP PAGE
1. ALARM SETUP
TCP-IP SETUP PAGE
1. SPEED:>512K
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
2. DVR NAME:[dvr16]
3. NET TYPE: OFF
4. STATIC IP SETUP
5. PPPOE ID SETUP
6. DNS/DDNS SETUP
7. SERVER PORT SETUP
MAC ADDR: xx.xx.xx.xx.xx.xx
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
1. SPEED : >512K / 512K / 256K / 128K / 64K
> Upload speed. Choose the close speed by applied.
2. DVR NAME: [ x 15 space ]
3. NET TYPE: STATIC / DHCP / PPPOE / OFF
4. STATIC IP SETUP
Press direction buttons up/down/left/right to
TCP-IP items position.
5. PPPOE ID SETUP
6. DNS/DDNS SETUP
7. SERVER PORT SETUP
Press values change button to change values.
-MAC ADDR
XX.XX.XX. Machine number, user cannot change.
2. DVR NAME: see DDNS apply.
3. NET TYPE:
> choose network connecting type as user.
4. STATIC IP SETUP:
> Depends on LAN or WAN. Input value witch get from network technician or ISP company.
> Advice user apply network speed Upload 512K / Download 512K, to avoid image data too big influence the
remote quality. The network traffic jam always make data transfer slow, it is normal.
> Do not via IP sharing device or firewall.
STATIC IP SETUP
1. IP ADDR: 192.168.192.250
2. GATEWAY: 192.168.192.254
3. NETMASK: 255.255.255.000
4. INTERNAL MAPPING: OFF
Internal Mapping:
LAN IP corresponding
37
Download from Www.Somanuals.com. All Manuals Search And Download.
5. PPPOE ID SETUP
If users apply the dynamic IP from ISP, then should input ID and password that from ISP information
list. And then go to set DNS/DDNS SETUP
For example:
Address name is [email protected]
Password is 654321
PPPOE ID SETUP
PPPOE ID SETUP
1. LOGIN ID: [ x 20 space]
1. LOGIN ID: [ [email protected]]
2.
:[ x 20 space]
2.
:[
]
3. PASSWORD: [ x 20 space]
4. CLEAR PPPOE SETUP
3. PASSWORD: [ 654321]
4. CLEAR PPPOE SETUP
Or
Notice:
PPPOE ID SETUP
1. Please “CLEAR PPPOE SETUP”
if data is changed.
1. LOGIN ID: [ 123456
]
2.
:[ @hinet.net.tw]
2. PASSWORD shows “*” icon.
3. PASSWORD: [ 654321]
4. CLEAR PPPOE SETUP
7. SERVER PORT SETUP
SERVER PORT SETUP
SERVER PORT SETUP
1. W.W.W: 0080
For IE. (feature)
1. W.W.W: 0080
2. VIDEO : 0021
2. VIDEO : 0021
For AP(Net Viewer)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
6. DNS/DDNS SETUP
Whatever user apply a free or pay DDNS, user needs to input every thing below.
DDNS apply: User can get a free hostname or pay from website below.
For example:
Click sign up to create an account.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Fill your information to sign up paper.
After, go to email account to get activate ID and code.
Click here to active
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Fill ID and code.
Click hostnames
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Type Hostname and choose a domain name, and then click Add Hostname.
EX: Hostname = Myhostname, Domain = 4irc.com
After click Add Hostname>>
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Data confirm done, then you can go to DVR advanced setupꢀ Network setup now.
Advanced setup ꢀ TCP-IP SETUP
TCP-IP SETUP PAGE
1. SPEED:>512K
TCP-IP SETUP PAGE
1. SPEED:>512K
DTDNS hostname
2. DVR NAME:[dvr16]
3. NET TYPE: OFF
2. DVR NAME:[Myhostname
3. NET TYPE: OFF
]
4. STATIC IP SETUP
5. PPPOE ID SETUP
6. DNS/DDNS SETUP
7. SERVER PORT SETUP
MAC ADDR: xx.xx.xx.xx.xx.xx
4. STATIC IP SETUP
5. PPPOE ID SETUP
6. DNS/DDNS SETUP
7. SERVER PORT SETUP
MAC ADDR: xx.xx.xx.xx.xx.xx
43
Download from Www.Somanuals.com. All Manuals Search And Download.
6. DNS/DDNS SETUP
DNS/DDNS SETUP
DNS/DDNS SETUP
1. D.N.S 1: 000.000.000.000
2. D.N.S 2: 000.000.000.000
3. SERVER : DHS
1. D.N.S 1: 000.000.000.000
2. D.N.S 2: 000.000.000.000
3. SERVER : DTDNS
4. DOMAIN: [ x 20 space]
5. LOGIN ID:[ x 20 space]
4. DOMAIN: [ 4irc.com
]
5. LOGIN ID:[ your DTNS long in name
]
6.
:[ x 20 space]
6.
:[
]
7. PASSWORD: [ x 20 space]
8. CLEAR DDNS SETUP
7. PASSWORD: [your DTNS long in password
8. CLEAR DDNS SETUP
]
Important:
LOGIN ID: This is your DTDNS apply login user name! Not Hostname!
PASSWORD: This is your DTDNS apply login password, not Activation Code!
44
Download from Www.Somanuals.com. All Manuals Search And Download.
6. HDD FORMAT
ADVANCED SETUP PAGE
1. ALARM SETUP
Press direction buttons up/down to
HDD FORMAT items position.
Press ENTER to format all HDD.
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
Caution: User can format HDD only when
all HDD stop record or playback.
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
ꢀ HDD FORMAT CAUTION!! :
** HDD FORMAT CAUTION!!**
ALL DATA IN THE HDD WILL BE
DESTROYED!!
Press ENTER button to format hard disk.
Press ESC button to cancel hard disk format
PRESS [ENTER] TO FORMAT.
PRESS [ESC] TO CANCEL.
Notice:
New hard disk detect: When DVR power, system would detect new hard disk install. If the hard disk is in
different format, then the message popup. User needs to press ENTER to format, if press MENU, and then
this hard disk would not be detected.
** NEW HDD CAUTION **"
"THE NEW HDD IS DETECTED."
Press FORMAT to format.
"FORMAT THE NEW HDD??"
Press MENU to exit.
"PRESS [ENTER] TO FORMAT."
MENU
"PRESS [MENU] TO CANCEL."
45
Download from Www.Somanuals.com. All Manuals Search And Download.
7. FACTORY DEFAULT
ADVANCED SETUP PAGE
1. ALARM SETUP
Press direction buttons up/down to
FACTORY DEFAULT items position.
Press ENTER to restore.
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
** CAUTION!! **
Press ENTER button to restore.
Press ESC button to cancel.
ALL SETUP VALUE WILL BE CLEAR,
AND RESTORE FACTORY DEFAULT!!
PRESS [ENTER] TO RESTORE.
PRESS [ESC] TO CANCEL.
8. SOFTWARE UPDATE
ADVANCED SETUP PAGE
1. ALARM
SETUP
SOFTWARE UPDATE
2. MOTION SETUP
3. RECORD SETUP
4. PASSWORD SETUP
5. NETWORK SETUP
6. HDD FORMAT
UPDATE METHOD:
UPDATE TYPE:
START UPDATE
7. FACTORY DEFAULT
8. SOFTWARE UPDATE
UPDATE METHOD: USB / HTTP / UNIX
USB: Copy firmware to USB device, and then plug in DVR USB interface. Choose START UPDATE and then
press ENTER to start. Or save the update version to USB device, DVR system would do data update
automatically. USB ERROR displays if no any USB device plug.
NETWORK: Press START UPDATE to link. 80 Port must open in your network server.
UNIX: For R&D testing.
UPDATE TYPE: APP / CUSTOM . APP + SYS
46
Download from Www.Somanuals.com. All Manuals Search And Download.
USB Data Read and Networking
1. Windows 2000 / XP, select small character display.
2. Resolution 1024 x 768.
3. RAM up to 128 MB, system up to PIII-800.
4. Double click SETUP.EXE of CD, and then start to install.
5. User can go to company server to download AP software.
6. Browse install path and then click Next.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Advice resolution 1024 x 768. According computer equipment, please choose suitable resolution
8. Select Start Menu Folder, and then click Next.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Click create a desktop icon or not, select DVR type, and then click Next.
4 CH and 16 CH DVR Net viewer is suitable. Only some split screen can not display.
10. Click INSTALL to start install.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Click Launch NetViewer and click Finish to done.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Click Setting.
Name: Name the IP address position.(Each name and IP saves every different input)
1 ~ 16 full screen select.
IP Addr: Input DVR IP address.
Full / Quad / 9 split / 16 split
6 split / 8 split / 10 split / 13 split
AVI codec: Different computer equipment; different AVI format.
Microsoft Windows Media video 9 is better.
Or Cinepak Codec by Radius(Slow transmission, better quality) /
Microsoft Video 1(Fast transmission, bad quality).
Video: Fullsize, Halfsize: screen size choose.
NTSC, PAL. Frame/Sec: Video system choose. Record frame choose.
Click OK to confirm.
On Live / PlayBack , click DVR to save action pictures, *.DVR file. It needs this software to play.
Browser, Local record path could change. The path user changes is for .DVR save, *JPG file is always
C:\DVR
- Press DVR to start record .DVR file(DVR LED green on.), press again to stop.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Click DDNS Host Name:
Type DVR DDNS host name: Myhostname.4irc.com
CMD Port: command port 21 or 7000 ~ 9999.
It is same as DVR network video port setup.
Which is same DVR MENU ꢀ ADVANCED SETUP ꢀ NETWORK SETUP ꢀ DVR NAME:
DNS/DDNS SETUP
TCP-IP SETUP PAGE
1. SPEED:>512K
9. D.N.S 1: 000.000.000.000
2. DVR NAME:[Myhostname
3. NET TYPE: OFF
]
10. D.N.S 2: 000.000.000.000
11. SERVER : DTDNS
4. STATIC IP SETUP
12. DOMAIN: [ 4irc.com
]
5. PPPOE ID SETUP
13. LOGIN ID:[ your DTNS long in name
]
6. DNS/DDNS SETUP
7. SERVER PORT SETUP
MAC ADDR: xx.xx.xx.xx.xx.xx
14.
:[
]
15. PASSWORD: [your DTNS long in password
16. CLEAR DDNS SETUP
]
DDNS host name:
Myhostname.4irc.com
52
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Click Login, depends on limits of authority. (ID / password is same as DVR)
PASV mode:
Sometime, if IP address under router or IP sharing, please click PASSIVE mode
on if login OK but no image display on FTP mode.
Originally is FTP active mode.
Factory ID is user login. Input admin if you are an administer. Must input on little character.
Factory: Password, admin : 44444, user : 11111. Password displays when log in, user just needs to input ID.
User log in, no PlayBack function authority. Total 6 people log in. Admin x 1, user x 5.
Click OK, after about 5 seconds, admin login!! Message popup. And then click Connect to start.
Login OK!! Check ID or
PASSWORD is correct.
Login error!! Check ID or
PASSWORD is correct.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
14. Click Connect, after about 2 ~ 3 seconds to start connect LAN or WAN. Click Disconnect to stop.
If the NETWORK is connecting success, the blue light would keep glisten
Click live / PlayBack / BackPlay mode.
Live: DVR live watching.
PlayBack: Change to playback mode. After 2 ~3 seconds to change.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY: Click RUN around 2 ~ 30 seconds to start play first record. If over 30 seconds, cannot find any file or
network disconnect, Time out message popup. Please try again play or connect again. Click STOP to end
playback.
TIME LIST: Click RUN, time lists popup. On the item, double click date and time to start play, around 2 ~ 30 to
start play first record. If over 30 seconds, cannot find any file or network disconnect, Time out message popup.
Please try again play or connect again. Click STOP to end playback.
TIME SEARCH: Chose date and time, click RUN, around 2 ~ 30 seconds to start play first record. If over 30
seconds, cannot find any file or network disconnect, Time out message popup. Please try again play or
connect again. Click STOP to end playback.
Notice: PLAY / TIME LIST / TIME SEARCH change, needs to stop play first.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
-Master HDD Event Lists:
-Slave HDD Event Lists:
Click RUN, time lists popup. On the item, double click date and time to start play, around 2 ~ 30 to start play
first record. If over 30 seconds, cannot find any file or network disconnect, Time out message popup. Please
try again play or connect again. Click STOP to end playback.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
15. BackupPlay:
- Click Open to choose file path.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Click Play to start backup data play. Click Stop to end. Click Pause to temporary stop playback. Click Resume
to restart.
Choose camera, click mouse right button. Camera 1 ~ 4 switches or reset all. Click Save “CamNo xx image . /
save image all to save current image. Save path is C:\DVR.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
4. AVI transfer: Click BackupPlay
AVI : On live or playback mode, save files to .DVR file. And then OPEN file, press play to start playback.
Press AVI button to start record AVI file. Press again to stop.
Only 2 cameras selectable. A warning message appears if user selects over 3 cameras,
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Net Viewer P / T / Z Dome control mode
For the setting details please refer to the remark on page 64 / 65 of the P/T/Z dome mode.
Click the left button of mouse to choose the PTZ dome channel, and then press PTZ icon.
PTZ Control function:
Click the left button of mouse on direction arrowhead, on each click, the PTZ dome will move 16 +/- 4 degree.
The Numeral presents for camera channel not PTZ ID.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Record Time Table: 80GB HD
Record Quality: Low. KB Range: Lowest: 13, Highest: 20. Average: 17.
REC FPS
REC Hour
REC FPS
REC Hour
REC FPS
REC Hour
120
11
60
22
30
45
15
91
10
137
5
3
2
1
1/2
274
1/3
4112
456
1/5
6853
685
1/10
13706
1370
1/15
20565
2741
1/30
41140
Record Quality: Normal. KB Range: Lowest: 14, Highest: 25. Average: 20.
REC FPS
REC Hour
REC FPS
REC Hour
REC FPS
REC Hour
120
9
60
19
30
38
15
77
10
116
5
3
2
1
1/2
233
1/3
3495
388
1/5
5825
582
1/10
11650
1165
1/15
17479
2330
1/30
34967
Record Quality: Fine. KB Range: Lowest: 15, Highest: 28. Average: 22.
REC FPS
REC Hour
REC FPS
REC Hour
REC FPS
REC Hour
120
8
60
17
30
35
15
70
10
105
5
3
2
1
1/2
211
1/3
3177
353
1/5
5295
529
1/10
10591
1059
1/15
15890
2118
1/30
31787
Record Quality: High. KB Range: Lowest: 17, Highest: 30. Average: 24.
REC FPS
REC Hour
REC FPS
REC Hour
REC FPS
REC Hour
120
7
60
14
30
32
15
64
10
97
5
3
2
1
1/2
194
1/3
2912
323
1/5
4854
485
1/10
9709
970
1/15
14563
1941
1/30
29127
Record Quality: Super. KB Range: Lowest: 19, Highest: 45. Average: 32.
REC FPS
REC Hour
REC FPS
REC Hour
REC FPS
REC Hour
120
6
60
12
30
24
15
48
10
72
5
3
2
1
1/2
145
1/3
2184
242
1/5
3640
364
1/10
7281
728
1/15
10922
1456
1/30
21845
Actual recording time is base on live environment. This table only for reference.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
VGA Description (Optional)
Accessories:
1. 20 PIN Male to Female D-SUB pin cable X 1
2. VGA PCB bracket X1
3. Screws X4
1. VGA board introduction.
VGA connector
Socket
2. Resolution switcher table
Pin 4
Resolution
Pin 1
ON
Pin 2
ON
Pin 3
640X480 60HZ
800X600 60HZ
1024X768 60HZ
640X480 75HZ
800X600 75HZ
1024X768 75HZ
ON
ON
ON
OFF
ON
ON
OFF
OFF
ON
ON
OFF
ON
OFF
OFF
ON
OFF
Resolution and switcher description.
Step. 1
Step. 2
Step. 3
DVR Power on. NTSC / PAL auto detects.
Pin 4 no used
Pin 1 ~ 3 switcher resolution. Do not need to power off DVR.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional
Hard Disk x 2 can be installed on DVR base. Both are 2-iron slices immobile type.
2 Iron slices are in the accessories box, please tell supplier if slices are not exist
2-iron slices immobile type:
Slices immobile type: 4 screws hole on each slice. 2 for DVR base fixed. Another 2 for hard disk fixed.
Hard disk install.: Locking hard disk screws, then locking DVR base screws to fixed on.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
P / T / Z Dome mode.
6. ADVNACED SETUP PAGE ꢀ P.T.Z SETUP
ADVANCED SETUP PAGE
PTZ SETUP PAGE
CHANNEL NUMBER
1. ID
1. ALARM
SETUP
SETUP
SETUP
2. MOTION
3. RECORD
2. PROTOCOL
3. BAUDRATE
4. AUTO TOUR
5. LINE SCAN
6. AUTO FOCUS
7. AUTO IRIS
4. PASSWORD SETUP
5. NETWORK SETUP
6. P.T.Z
SETUP
7. HDD FORMAT
8. FACTORY DEFAULT
9. SOFTWARE UPDATE
PTZ SETUP PAGE
CHANNEL NUMBER: CH01 ~ CH16
1. ID: 01 ~ 16
2. PROTOCOL: PELCO-P / PELCO-D / LILIN / ABC / ELITAR / DENTEC-D / DENTEC-P / OFF
3. BAUDRATE: 1200 / 2400 / 4800 / 9600
4. AUTO TOUR:
5. LINE SCAN:
ON / OFF
ON / OFF
6. AUTO FOCUS: ON / OFF
7. AUTO IRIS: ON / OFF
After PTZ setup done, go back to live mode. Press W.M. button to PTZ mode.
Icon displays beside date and time caption. To use direction button left/right/up/down
to move PTZ Dome. PTZ Dome can not be control on split screen.
PS. Because the P / T / Z Dome setup is independent by channel and ID, user does not worry about the
different ID / Protocol / Baud Rate would affect DVR controls P / T / Z dome error. Just make sure channel and
ID / Protocol / Baud Rate corresponding is correct.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Button Comparison:
W.M.: Press W.M button To P / T / Z mode
PLAY / REC = IRIS off / IRIS open
= FOCUS near / FOCUS far
BACKUP / T-SRH = ZOOM IN / ZOOM OUT
MENU = P / T / Z Dome Menu
FRE. : To Preset mode. PRESET: 000 glisten on left-up corner. Moves P / T / Z dome to the position user
wants.
When “PRESET: glistening”, press number button.
EX: 1 ~ 9. 10 = 1 + 10, 11 = 1 + 1, 12 = 1 + 2, 21 = 2 + 1, 132 = 1 + 3 + 2.
ZOOM : After press ZOOM button to save the presets.
INFO : Press FRE. button into preset mode. When “PRESET: glistening”, press number button, and then
press INFO to call preset.
AUTO : Press FRE. button into preset mode. When “PRESET: glistening”, press number button, and then
press AUTO to clear preset.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
IE Networking Software
1. This web is for preliminary IE browser.
2. User can download the network viewer from this web page or view the DVR video image in the future.
3. The AP software is already saved to DVR system IC. User needs to do is:
a.) Go to Advanced Setupꢀ Network SetupꢀSets LAN or WAN IP address of DVR.
b.) Open IE browser, and then into your IP on the IE address bar.
c.) If LAN or WAN connects ok, the 16 Channel Digital Video Recorder web page displays like under:
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording condition
A: Solution 1 for residual image
16 channel: channels are divided into 4 groups as:
(1、5、9、13) ( 2、6、10、14)
(3、7、11、15) (4、8、12、16)
Recording with one input from each group
B: Solution 2 for playback image pasting
Record Chanel \ Record Rate
30fps or less
60fps
2
1
2
3
4
5
1
2
4
4
8
4
7
Channel for
Video input
6
7
7
7
8
8
9
11
11
11
13
13
14
16
16
10
11
12
13
14
15
16
14
16
Remark A:
1. Under 30fps, the recording channel can not be the multiple of 3, 5, and 9
2. At 60fps, the recording channel can not be the even multiple of 3, 5, and 9
3. 120fps recording under 16 channel
The channels are divided: (1、2、3、4) in one group / (5、6、7、8) in one group
(9、10、11、12) in one group / (13、14、15、16) in one group
As long as there is one input in either group, all the 4 channels will be recorded
67
Download from Www.Somanuals.com. All Manuals Search And Download.
|