QUICKSPECS
MaXLine III SATA Hard Disk Drive Family
CAPACITIES:
MODEL
ACT CYLS
HDS:SECT
MAX CYLS
MAXLBA
GB CAPACITY
7B250S0
486,344
16:63
16,383
490,234,752
250GB
7B300S0
588,422
16:63
16,383
593,129,376
300GB
SATA = Serial ATA
Attaching SATA Power Cables:
Key Features:
• SATA interface
• Burst Data Transfer Speeds
up to 150 MB/sec
• Up to 300GB capacities
• 9.3 ms average seek time
• 16MB Cache Buffer
• 100% FDB Motors
• 7200 RPM
Misc Drive Info:
For more information on step-by-step
installation procedures, troubleshooting
procedures and more go to the Maxtor.com
GB = 1 billion bytes. Total accessible
capacity varies depending on operating
environment.
PLEASE NOTE: Unlike standard ATA drives, Serial ATA drives DO NOT
require the use of jumpers to configure the drive. Please disregard any
references to jumper settings and Master, Slave and Cable Select
configurations in the Maxtor Installation Guide.
SATA Interface Cable Requirements:
7-pin Serial ATA interface cable (Gen. 1- or Gen. 2-compliant) up to 1 meter in length.
Document #: 42104
Date: 6/21/04
Rev: 00
Download from Www.Somanuals.com. All Manuals Search And Download.
|