LIMITED WARRANTY* ONE (1) YEAR:
Your Elite appliance is built with precision, inspected and tested before leaving our factory.
POPCORN MAKER
It is warranted, to the original purchaser, to be free from any manufacturing defects under
normal use and conditions for one (1) year, cord excluded. During that period, should the
appliance fail to operate properly, return the appliance with your sales receipt to the store
where purchased. This warranty gives you special legal rights and you may also have
other rights to which youare entitled, which may vary from state to state. If you use your
appliance for household use and according to instructions, it should give you years of
satisfactory service.
This limited warranty covers appliances purchased and used within the
surrounding United States and does NOT cover:
- Damages caused from improper usage or installation of appliance.
- Damages caused from shipping.
- Defects other than manufacturing defects.
- Breakage caused by misuse, abuse, accident, alteration, lack of proper care and
maintenance, or incorrect current or voltage.
- The loss or missing parts of the appliance. Parts will need to be purchased separately.
- Damage from service by other than an authorized dealer or service center.
- Any transportation and shipping charges.
RETURNS : Any return of defective merchandise to the manufacturer must be
processed accordingly by contacting customer service first to obtain RA # (Return
Authorization Number). We will not accept any returns of merchandise without an
applicable RA #.
*One Year Warranty valid only in the United States,excluding Alaska, Hawaii, and
Puerto Rico.
For international warranty, please contact the local distributor.
**Any instructions or policy included in this manual may subject to change at any time.
Model EPM -400
Elite Popcorn Maker
INSTRUCTION MANUAL
Distributed by: MAXI-MATIC® , USA
18401 E. Arenth Ave. Building B. City of Industry, CA 91748
Customer Service Department: (626) 912-9877 Ext. 116/120 MON-FRI 9am-5pm PCT
Email: info@maxi-matic.com
ALWAYS READ ALL INSTRUCTIONS BEFORE USING
Download from Www.Somanuals.com. All Manuals Search And Download.
Model no. & Specifications:
Assembling Instructions:
1 . Use bolts & washers (Package B) provided to connect to the Long stand (F) and the
2-pcs of the square poles (E) together.
2 . Connect the completed above parts (1) with the short stand (G) by using the bolts &
washer in – (Package B).
3 . Insert axis (H) into short stand. Place sleeves and washers from (Package C) onto
each side of wheels (J) and fix it with the round cap nuts with wrenches provided in
(Package D).
4 . Turn the storage cabinet (K) up side down for convenient assembly. Insert both
ends of the short and long stand into the bottom of (H) and then fix by bolts in
(Package B).
Model no.: EPM-400
Voltage : AC 120V~60Hz
Input Power: 860W
Please read this user manual carefully before assembling and using.
Assembling Parts
5 . Turn the completed unit back
to up-right position. Install
the handrail (D) onto the left
hand & the working platform
(C) on the right hand by bolts
& nuts with washers included
in (Package A).
6 . Place the main unit (A) onto
the topside of the storage
cabinet. (Caution: Power cord
outlet should be inserted into
the U-shape position.)
7 . Hook up the Kettle Pot (B)
onto the hanger. (Caution:
Roller bar should be on the
door side and also check if
gears between pot and ceiling
are perfectly matched).
8 . Connect the power plug from
the ceiling with the socket on
the bottom of the pot.
A. Main unit x 1 pc
B. Popping pot x 1 pc
D. Hand rail x 1 pc
F. Long stand x 1 set
H. Wheel axis x 1 pc.
K. Storage cabinet x 1 pc
9 . Open the door of
C. Working platform x 1 pc
E. Square pole x 2 pcs
G. Short stand x 1 set
J. Wheels x 2 pcs.
L. Popcorn scoop x 1 pc
N. Parts x 1 box include:
the storage
cabinet and
release the spring
shaft beneath the
main unit in order
to fix the main unit
with the storage
base.
M. Kernel scoop + Oil scoop set
-
-
-
-
(Package A) gold plated bolts x 8 pcs. + nuts x 8 pcs.+ washers x 8 pcs.
(Package C) metal sleeves x 2 pcs. + nuts with round cap x 2 pcs.
(Package B) bolts x 8 pcs. + washers x 4 pcs.
(Package D) wrench x 2 pcs.
Remark: Main unit alone
could be used and placed
on a stable counter top for
Assembled Product
operation.
-
4
-
-
3
-
Download from Www.Somanuals.com. All Manuals Search And Download.
USING YOUR POPCORN MAKER
TIP: The popcorn maker comes with a handy storage compartment. It is a convenient
way for you to store any utensils or non-perishable ingredients right along with your
popcorn maker. You will always be prepared and well equipped to make hot, fresh
popcorn anytime.
1) Make sure the popcorn maker is unplugged before you do any of the following.
2) Before using the unit, please check carefully if voltage is suitable to the wattage.
(Please check if the voltage is matching with rating label specified next to the power
cord).
3) Clean the internal surface of the kettle pot and main unit surfaces.
4) Main unit has 3 function switches as follows:
Fig. 1
Fig. 3
Fig. 2
Fig. 4
Spot light and warmer
Stirrer
(1)
(2)
(3)
Cleaning and Maintenance
Stainless steel Pot heater
To avoid burning of excess oils on the bottom of the kettle, it is strongly recommended to
clean the kettle after using 3 to 4 times.
5) Hook up the kettle onto the hanger of the main unit.
6) Now you can plug in the power cord to the popcorn maker.
7) Switch on the light and heater (1 & 3), and fill the kettle with 1-Tablespoon of
veg etable oil (Fig. 1). Do not use butter inside the kettle. Butter will burn.
8) Kettle should be pre-heated for 3 to 4 minutes with oil (until steam comes out from
the pot).
After using the popcorn machine, users should use wet towel to clean up the main unit,
main body and glasses; rubbish tray is strongly recommended to clean frequently to
prevent any bacteria growth.
9) Measure out ½-Cup of plain popcorn kernels. Make sure to use plain popcorn
kernels with no seasoningor salt as it will cause the oil to splatter.
10) Lift the lid and then pour in the kernels carefully. (Fig. 2) Caution: Lid will be hot!
11) Switch ON the Stirrer (2) . (Fig. 3)
Quick Cleaning Procedure:
Switch OFF (2 & 3). Pour 1-1/2 to 2 cups of water (NO detergent is necessary) into
kettle. Sw itch ON the stirrer (2) & heater (3) again to boil the water and let the stirrer
turn in order to remove excess amount of seasoning or grit stuck on the surface. Pour
out the water after about 1 to 2 minutes of boiling. Caution: Kettle will be hot!
Repeat the same procedure 2 to 3 times for better results.
12) Shut the door carefully.
13) Popcorn starts popping out through the lid after about 2 to 3 minutes. (Fig. 4)
14) Switch OFF the stirrer & heater (2& 3) when popping is complete (No more popping
sounds from the pot). Rotate the roller bar of the pot and pour out all remaining
popcorn from pot. Caution: Kettle will be hot !
15) Keepheater switch (3) OFF if the unit is not being continuously used.
16) Serve your popcorn with popcorn scoop provided.
Standard cleaning procedure:
1. Repeat the above “Quick cleaning procedure” until clean.
2. Switch off the machine and wait for the kettle to cool down. Clean the interior and
exterior of the kettlewith a brush or damp cloth. (NEVER immerse the kettleinto water.)
17) Remove plug from power supply if the unit is not being used for a long period of time.
18) Repeat step 7 to 12for continuous popping.
-
6
-
-
5
-
Download from Www.Somanuals.com. All Manuals Search And Download.
|