MaxTech Computer Monitor XT4871 User Manual

XT4871  
14 INCH  
COLOR MONITOR  
USER'S  
MANUAL  
Features:  
• 1024 x 768, Non-Interlaced  
• 1280 x 1024, Interlaced  
• .28 mm Dot Pitch  
• 100 Hz Refresh Rate  
• Power Saving Operation (VESA DPMS)  
• Non-Glare Screen  
• Full Screen Display  
• Easy Access Front Controls  
• Unlimited Palette of Colors  
• Digital Controls  
• Plug and Play  
Part #MAN104 Rev 1.0  
XT4871  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section 1 - General Information  
Congratulations on purchasing a MaxTech 14-inch Color Monitor. The  
monitor uses one of the finest CRTs available in the industry. The 0.28 mm  
dot pitch non-glare tube, provides a crisp and vivid color display. The  
monitor complies with the MRP-I standard to reduce electro-magnetic  
emissions. Advanced electronics and digital controls make it the perfect  
monitor for applications ranging from home computing to business  
presentations.  
The monitor is compatible with VGA, SVGA, and XGA display adapters.  
It operates at resolutions ranging from 640 x 350 to 1280 x 1024 with  
unlimited colors. The monitor is PnP (Plug and Play) compliant to simplify  
setup and configuration in Windows 95 or other PnP operating systems.  
1.1  
Precautions When Using the Monitor  
When setting up and using your monitor, pay special attention to the  
following:  
• To eliminate eye fatigue, do not use your monitor against a bright  
background or where sunlight or other light sources will shine directly  
on the monitor.  
• Your monitor should be placed just below eye level for optimum  
viewing.  
• Allow adequate ventilation around the monitor so that heat from the  
monitor can properly dissipate.  
• Neither the monitor itself nor any other heavy object should rest on the  
power cord. Damage to a power cord can cause fire or electrical  
shock.  
• Keep the monitor away from high capacity transformers, electric  
motors and other strong magnetic fields.  
• Do not use your monitor in a damp, dusty or dirty area.  
• Handle the monitor with care when transporting.  
• Unplug the monitor during electrical storms.  
1.2  
Power Saving Modes  
The MaxTech monitor supports VESA Display Power Management Sig-  
naling (DPMS) SUSPEND and OFF modes. DPMS defines a method for  
a computer to signal the monitor to reduce its power consumption when  
idle. DPMS features must be supported by both the computer and the  
monitor for them to be available. Computer support of DPMS requires the  
use of a DPMS compliant video card.  
The monitor enters DPMS SUSPEND mode when the computer turns off  
the Vertical Synchronization signal. This power-saving mode reduces the  
monitor’s power consumption to 25W. When the synchronization signal  
is re-enabled the monitor returns to normal operation.  
The monitor enters DPMS OFF mode when the computer turns off both the  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Horizontal and Vertical Synchronization signals. This mode reduces the  
monitor’s power consumption to 5W. When the synchronization signals  
are re-enabled the monitor returns to normal operation.  
Section 2 - Installation  
2.1  
Attaching the Base  
Figure 2-1 Connecting the  
Base  
• Carefully place the monitor on its  
side or top.  
• Insert the hooks on the swivel base  
into the slots in the bottom of the  
monitor. Push down and forward  
on the base until it snaps into place.  
• Place the display upright in an ap-  
propriate location.  
2.2  
Connecting the Cable  
Make sure that power to the monitor and the computer is off.  
Connect the cable from the back of the monitor to the video connector  
on the computer.  
• Attach the power cord to the monitor and plug it into an AC outlet.  
Figure 2-1 Monitor Connections  
Expansion boards  
COM1  
COM2  
LPT1  
VIDEO  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
• The monitor is now ready for use.  
Section 3 - Monitor Controls and LEDs  
Figure3-1ControlsandLEDs  
13  
12  
11  
1
2
3
4
10  
8
6
7
9
5
1. POWER LED: Lit when monitor is ON. Unlit when monitor is OFF.  
2. POWER: Press once to turn monitor ON. Press again to turn monitor  
OFF.  
3.CONTRAST: Adjusts the contrast. Turn clockwise to increase the  
contrast.  
4.BRIGHTNESS: Adjusts the display brightness. Turn clockwise to  
increase the brightness.  
Digital Controls: When the LED above a control icon (5-10) is selected  
by the SELECT button (11), that control can be adjusted by the UP and  
DOWN buttons (12, 13).  
5.TRAPEZOID: Adjusts the slant of the sides of the display.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. PINCUSHION: Adjusts the pincushion (shape) of the display  
7. HORIZONTAL-SIZE: Adjusts the display width.  
8. VERTICAL-POSITION: Adjusts the vertical position  
9. VERTICAL-SIZE: Adjusts the display height  
10. HORIZONTAL-POSITION: Adjusts the horizontal position  
11. SELECT: Press to select an adjustment parameter (5-10).  
12. DOWN: Press to reduce the setting of the selected parameter (5-10).  
13. UP: Press to increase the setting of the selcted parameter (5-10).  
Note:Pressbothbuttons(UP andDOWN) togetherto RECALLthedisplay  
to the factory settings.  
Section 4 - Troubleshooting  
No picture, power indicator off  
• Check AC cord is plugged into outlet and monitor.  
• Turn on the power switch.  
No picture, power indicator on.  
• Check that video cable is connected completely.  
• Adjust brightness and contrast controls.  
• Turn the computer on.  
Image is not centered  
• Adjust Vertical Position and Horizontal Position controls.  
Appendix A - Specifications  
Picture Tube  
Size  
Dot pitch  
14-inch diagonal  
0.28mm  
Surface treatment Non-glare  
Horizontal Freq  
Vertical Freq.  
30-54KHz  
50-100 Hz  
Resolution (Max.) 1280 x 1024 interlaced  
1024 x 764 non interlaced  
Video Dot Rate  
Data Area  
65MHz  
9.76 x 7.32 in.  
Maximum Refresh Rates  
Resolution  
640 x 480  
800 x 600  
Refresh Rate  
100 Hz  
85 Hz  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
1024 x 768  
1152 x 864  
1280 x 1024  
70 Hz  
60 Hz  
43 Hz  
Deflection  
Geometric distortion  
Linearity distortion  
H.<=2.5mm, V.<=2.5mm  
H<=10%, V<=8%  
Pincushion distortion  
High voltage regulation  
<=2mm  
H<=4mm, V<=4mm(0-25FL)  
Low radiation*  
MPR-I specification  
Frontcontrols  
Power,Brightness,Contrast,Horizontal-Size,Hori-  
zontal-Position, Vertical-Size, Vertical-Position,  
Pincushion, Trapezoid  
Power saving  
Inputvoltage  
Display Power Management Signaling (DPMS)  
SUSPEND mode 25W(Max.)  
OFF mode  
5W(Max.)  
100~240VAC, 50/60 Hz  
Power consumption 85W maximum  
Plug and Play  
DDC1, DDC2B  
Operating  
Environment  
Temperature  
Humidity  
5°~35°C  
20~90%  
Altitude  
0~10,000ft.  
Connector  
15 Pin D-Sub  
*Low radiation monitors only.  
Specifications subject to change without notice.  
Appendix B - Video Cable Pinout  
Figure D - Pin  
Layout and Pin  
Assignment  
Chart  
PIN  
1
SIGNAL  
Red  
PIN SIGNAL  
9
No Pin  
2
Green  
Blue  
10  
11  
Digital Ground  
3
Monitor Sense 1  
(Jumper to Pin  
10)  
4
5
Monitor Sense 1  
(Jumper to Pin 10)  
12  
13  
SDA  
Monitor Sense 1  
Hor. Synch.  
(Jumper to Pin 10)  
6
7
8
Red Return  
Green Return  
Blue Return  
14  
15  
Vert. Synch  
Data Clock (SCL)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix C - Three Year Warranty  
MaxTech warrants to the original buyer of this product against defects in  
material and workmanship for three years from the date of purchase.  
Except as specified below, this warranty covers all defects in material or  
workmanship in this product. The following are not covered by the  
warranty:  
1.Any product which is not distributed in North America by MaxTech or  
which is not purchased in North America from an authorized MaxTech  
Dealer.  
2.Any product on which the serial number has been defaced, modified  
or removed.  
3.Damage, deterioration or malfunction resulting from:  
a.Accident, misuse, abuse, neglect, fire, water, lightning or other acts  
of nature, commercial or industrial use, unauthorized product  
modification, or failure to follow instructions supplied with the  
product.  
b.Repair or attempted repair by anyone not authorized by MaxTech.  
c. Any shipment of the product (claims must be presented to the  
carrier).  
d.Removal or installation of the product.  
e. Any other cause which does not relate to a product defect.  
4.Cartons, carrying cases, batteries, external cabinets, magnetic tapes  
or any accessories used in connection with the product.  
MaxTech will pay all labor and material expenses for covered items, but  
we will not pay for the following:  
1.Removal or installation charges.  
2.Costs of initial technical adjustments (set-up), including adjustment  
of user controls.  
3.Payment of shipping charges.  
HOW TO OBTAIN WARRANTY SERVICE  
In the event the product requires service, call the MaxTech Service Center  
at (562) 921-4438 between 9:00 a.m. and 6:00 p.m. (PST Monday through  
Friday). When you are instructed by the Technical Support Representative  
to return the product to MaxTech for repair, you will be given an RMA  
(Return Merchandise Authorization) number. You must have an RMA  
Number to return the product for service. Use the following procedure  
to return the product to MaxTech:  
1. Return the product in its original package and packing (if possible).  
2. Be sure to include your name, address, day-time telephone num-  
ber, RMA number, and a brief description of the problem (also  
enclose a check for out-of-warranty repair).  
3. After wrapping the package securely for shipping, print your name,  
return address and the RMA # clearly on the outside of your  
package.  
4. Ship the unit prepaid via UPS or the U.S. Postal Service to the  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
address provided by the technician when you call. We recommend  
that the unit be insured.  
This warranty is valid for products sold in North America only. Contact your  
local authorized distributor or dealer for the warranty offered in other  
areas.  
All warranty services must be performed by Authorized Service Centers.  
There are no user serviceable parts inside the unit. Do not remove any  
components or attempt to service the unit by any unauthorized service  
center. This warranty is voided if the product has been abused, misused,  
modified, or repaired by an unauthorized service center.  
LIMITATION OF IMPLIED WARRANTIES  
All implied warranties, including warranties of merchantability and fitness  
for a particular purpose, are limited in duration to the length of this  
warranty.  
EXCLUSION OF DAMAGES  
MaxTech'S liability for any defective product is limited to the repair or  
replacement of the product, at our option. MaxTech shall not be liable for:  
1. Damage to other property caused by any defects in this product,  
damages based upon inconvenience, loss of use of the product, loss  
of time, commercial loss; or  
2. Any other damages, whether incidental, consequential or otherwise.  
Some states do not allow limitations on how long an implied warranty lasts  
and/or do not allow the exclusion or limitation of incidental or consequen-  
tial damages, so the above limitations and exclusions may not apply to  
you.  
HOW STATE LAW RELATES TO THE WARRANTY  
This warranty gives you specific legal rights, and you may also have other  
rights which vary from state to state.  
Appendix D - Notices  
FCC Class B Statement  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interfer-  
ence in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy, and if not installed and used in accordance  
with the instructions, may cause harmful interference to radio communi-  
cations. However, there is no guarantee that interference will not occur in  
a particular installation. If this equipment does cause harmful interference  
to radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Reorient or relocate the receiving antenna  
• Increase the separation between the equipment and the receiver  
• Connect the equipment into an outlet on a circuit different from that  
to which the receiver is connected  
• Consult the dealer or an experienced radio / TV technician for help  
Notice: Shielded cables, if any, must be used in order to comply with the  
emission limits.  
Notice: Any change or modification not expressly approved by the  
Grantee of the equipment authorization could void the user’s authority to  
operate the equipment.  
Canadian DOC Compliance Statement  
This equipment does not exceed Class B limits for radio noise emissions  
for a digital apparatus, set out in the Radio Interference Regulations of the  
Canadian Department of Communications.  
DOC Avis de Conformation  
Le présent appereil numérique n'émet pas de bruits radioélectriques  
dépassant les limites applicables aux appareils numériques de la class B  
prescrites dans le Règlement sur le broullage radioélectrique édicté par  
le ministère des Communications du Canada  
Disclaimer, Copyright, And Other Notices  
The information contained in this manual has been validated at the time  
of this manual's production. The manufacturer reserves the right to make  
any changes and improvements in the product described in this manual  
at any time and without notice. Consequently, the manufacturer assumes  
no liability for damages incurred directly or indirectly from errors, omis-  
sions or discrepancies between the product and the manual.  
All registered trademarks are the property of their respective owners.  
Copyright © 1997 MaxTech. All rights reserved. No reproduction of this  
document in any form is allowed without written permission from MaxTech.  
First Edition  
GZ/DR - Version 1.0  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  

Learning Resources Games LER 3044 User Manual
Legacy Car Audio Car Stereo System LCA Series User Manual
LG Electronics Telephone LIP 6812 User Manual
Link electronic Switch PAF 821 User Manual
LSI Decking DF1153 E1 User Manual
Makita Drill 6017D User Manual
Marantz CD Player DR4050 User Manual
Maytag Clothes Dryer W10443045B User Manual
Melissa Fryer 243 009 User Manual
MicroBoards Technology Label Maker PF Pro Disc Printer User Manual