Marshall electronic Home Security System V DV PWR1 User Manual

Marshall Electronics  
V-DV-PWR1  
1 Product Overview  
Use the DV-Power pack (V-DV-PWR1) with Marshall Electronics line of Stand Alone monitors. This product is the  
perfect solution for users of DV and HDV Camcorders and allows you to standardize on one type of battery for a  
wide range of applications.  
2 Features  
• Designed for users of DV and HDV cameras  
• Includes V-Mount adapter for use with Marshall Stand Alone Models  
• Charge from Monitor Power source, car battery, or optional charger.  
• Monitor may be operated while batteries are charging  
• 3 Stage Power Indicator  
• Charge Status Indicator  
• 4 Pin XLR Male Power Source/Charger  
• 4 Pin Female Power Take Off. Can be used for devices without V-Mount Adapter.  
Can also be used for Lights or Wireless Transmitters and Receivers.  
• Durable enclosure  
3 Electrical Specications  
Output Voltage  
10 to 16.8VDC (Battery Dependent)  
Up to 3 Ampere  
MAX Continuous Current Draw  
PEAK Current Draw  
Charger Voltage  
4 Ampere  
12 VDC  
Charge Current  
Approx. 500 Milliamp to 2 Amp (Battery Dependent)  
Three Color LED RED to GREEN illumination  
>12 VDC, 11 to 12 VDC, 11 to 10 VDC from 3 Color LED  
Flashing LED  
Charge Indications  
Drain Indications  
Low Power Indicator  
Battery Type  
Sony NP-Fxx Type Lithium Ion  
10 to 16.8VDC (Battery Dependent)  
Output Voltage  
4 General Information  
Power required  
Dimensions  
12V D.C. from Universal Voltage Class 2 external supply  
2.125”D x 5.0”H x 3.75”W (54mm x 127mm x 95.3mm)  
0.75Lb (0.34kg)  
Weight  
Operating Temperature  
RoHS /Environmental  
14 ̊ F to 140 ̊ F (-10 ̊ C to +60 ̊ C)  
Do not dispose. Return to Manufacturer or Authorized Recycle Facility  
5 Optional Accessories  
1. V-PS12-5V (XLR) - 12 VDC Power Source /Charger  
2. V-XLR-B – Two foot long Power Tap Cable for monitors requiring Barrel or Bayonet Type connector  
3. V-XLR-ConX – Two foot long Power Tap Cable for Marshall products using 2 Pin Female ConXal twist lock  
4. Batteries – To Be Announced  
6 Operational Setup  
• Unpack the V-DV-PWR1 and physically inspect for any damage that may have occurred during shipping. Should  
there be any damage, immediately contact Marshall Electronics at 800-800-6608. If you are not located within the  
continental united states call +1 310-333-0606.  
• Install batteries into mount clips  
• Connect required cables for power charge or output.  
• Turn on using rocker switch located on the side of the adapter. The LED will illuminate and ash when power is on  
and current is being drawn. The LED will change color from Green to Yellow to Red as power is discharged.  
To charge, attach the V-PS12-5V (XLR) power supply to the female XLR connection. LED will illuminate Red,  
Yellow, Green during charge  
o Red = less than 10VDC available battery power  
o Yellow = 11 to 10 VDC available battery power  
o Green = Greater than 12 VDC available battery power  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Leviton Telephone LE 47609EMP User Manual
Life Fitness Stepper Machine 93SI User Manual
Lindy Cable Box 42867 User Manual
Magnadyne Automobile Alarm M12A User Manual
Magnavox Flat Panel Television 50ML8305D 17 User Manual
Magnavox TV VCR Combo 19MDTR17 User Manual
Makita Drill HP2010N User Manual
Maytag Clothes Dryer W10454277C User Manual
McCulloch Chainsaw Aug 42 User Manual
Melissa Styling Iron 635 122 User Manual