Marshall Electronics
1910 East Maple Ave.
El Segundo, CA 90245
Tel.: 800-800-6608 • 310-333-0606
Fax: 310-333-0688
Email: [email protected]
V-R171P-HDA Users Guide
Product Overview
Features
1
2
3
4
5
6
7
8
9
Specifications
Operational Setup
Connectors
Front Panel Indicators and Controls
Menu Functions
Standard Accessories
Optional Accessories
Warranty
Marshall Electronics warranties to the first consumer, that this V-R171P-HDA 17 inch LCD rack mounted monitor will, under normal use, be free from defects in work-
manship and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the purchasing end user only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a
warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in design or construc-
tion, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above, or to extend
the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.
An extra note about LCD displays: It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the periphery of the display active viewing
area. Marshall Electronics has the option to reserve service for display pixel failure if deemed unobtrusive to effective use of the monitor by our technicians.
Due to constant effort to improve products and product features, specifications may change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Product Overview
The V-R171P-HDA is a rack-mounted monitor with a 17”, 5 : 4 aspect ratio active matrix LCD/TFT module. Mount-
ing can also be achieved via a VESA 75 reinforced mount point on the rear of the unit. The display will produce a
high-resolution 1280H x 1024W SXGA image from a computer or display scaled video images. Component video,
Composite video or Y/C (S-video) images are displayed via a scaling chip with a separate DVI-D input for video or
computer. The unit is designed to fit into an EIA standard 19” rack and occupies 8RU of space. For ease of opera-
tion the V-R171P-HDA includes front mounted selector buttons for menu operations with On Screen Menu Display
(OSD) and “ON AIR” tally.
A U.L. Class 2 power supply is included and the unit is factory ready for rack mount installation.
2
Features
• SXGA Resolution 1280 × 1024 pixels, 1.3 million total RGB pixels produce 16.7 million colors
• Bright 300 candle luminance
• Compact design fits in EIA standard rack 8U high
• VESA 75 mount for wall, ceiling or desk top
• Automatic Gamma Correction
• 16:9 or 4:3 aspects
• 4 Preset color temperatures
• Self-powered tally system
• NTSC/PAL operation
• 170° CRT style viewing angles
• 12 VDC 4-pin XLR power connector with external power supply
• V-Mount battery adapter
3
Specifications
Display (Viewing Area)
Screen Format
Resolution (Dots)
Dot Pitch
17” (13.30” × 10.64”) (337.92mm x 270.34mm)
4 x 5
1280H x 1024V
0.264 square pixel
Screen Treatment
Brightness (in cd/m²)
Pixel Response
Viewing Angle
Backlight
Anti-Glare and Anti-scratch Hard Coat
300 cd/m²
13ms Maximum - Black to White to Black (3ms rise, 10 ms decay)
75° to 85° From Center
CCFL 50,000 hour
500:1
Contrast Ratio
System
NTSC / PAL
1 S-Video (4 Pin Mini Din), 1 Composite (BNC), 1 SXGA (15P HD-15),
Component Video (3 BNC), DVI-D (Digital only), Power (4 Pin Male XLR),
Tally (15 Pin HD-15)
Inputs
Rack Mount Dimensions
Desk Top Dimensions
Approx. Weight
19.12”W × 13.8”H × 3.0”D (48.5cm x 35cm x 7.62cm)
17”W x 13.8”H x 3.0”D (43.2cm x 35cm x 7.62cm)
12.5 lbs (5.7kg)
Power Consumption
Operating Temperature
12 VDC from included power supply (70Watt Max)
0°C to 50°C (Storage -20°C to +60°C)
V-R171P-HDA Ussers Guidde
2
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Operational Setup
1. Unpack the V-R171P-HDA and accompanying power supply. Physically inspect for any damage that may have occurred
during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If you are not
located within the continental united states call +1 310-333-0606.
2. Install in your desired location.
3. Connect required cables for signal input and output.
4. Attach battery (Optional) or power connection from power supply to the back of the unit.
5. Plug the power supply into the A.C. source
6. Turn on the V-R171P-HDA by depressing the power switch located on the front of the unit.
Refer to Page 4 picture for location of switch settings.
7. Perform input selections and screen adjustments as detailed in following sections of this document.
5
Connectors
Tally IN HD-15 Female
Pin1- Green
Pin2- Red
Pin3-Amber
Pin4 Ground
Pin5- Ground
Pin6-
in8-
Pin 9-
Pin10-
Pin11-
Pin12-
Pin13-
Pin14-
Pin15-
Pin7-
12 VDC from
power supply
4 Pin Male XLR
Pin 4 - Pos
Pin 1- Neg
Component Video
75Ω Terminated
Composite
Video
75Ω Terminated
S-Video IN
4 Pin Din (Female)
Pin1 - GND
Pin2 - GND
Pin3 – Y in
Pin4 – C in
DVI-D In
SXGA IN
HD-15 Female
Pin1-Red IN
Pin 9-
Pin2-Grn IN
Pin10-
Pin3-Blu IN
Pin4-
Pin5-
Pin11-
Pin12-
Pin13-
Pin6-Gnd
Pin7-Gnd
Pin8-Gnd
Pin14-HSync
Pin15-VSync
Marshall Electronics
3
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Front Panel Indicators and Controls
Tally Indicators
Dual Function EXIT button
1- Cycles Input selection
(Selection Displayed lower right of screen)
2- Exits OSD Menu Mode
Power On/Off selec- On Screen Display
UP / DOWN / LEFT / RIGHT
menu selections for OSD functions
tion button
Illuminates dim
red when power is
applied.
(OSD)
MENU Activation
Button
Turns bright red
when monitor is
switched on
7
Menu Functions
Note: MENU select will toggle through 5 menus, FUNCTION, PICTURE, AUDIO (NOT USED), TV-SETUP and WINDOW
Function Menu
Use UP/DOWN/LEFT/RIGHT buttons to select function.
LANGUAGE-English, French, Spanish
AUTO ADJUST- Used for PC and DVI signals to auto fit
image to screen.
OSD TIME-OUT - Set time in seconds (0 to 60) for OSD
to drop from screen after last button push
SLEEP TIMER- Used to automatically turn monitor off
after programmed delay
Picture Menu
Use UP/DOWN/LEFT/RIGHT buttons to select function.
PSM - (Picture Status Memory) Used only with video signals.
Select one of four choices
STANDARD- Default brightness, contrast and color.
DYNAMIC- Brightness, contrast and color adjusted for changes
in source video.
CINEMA- Brightness, contrast and color adjusted for viewing in
a darkened environment.
CUSTOM- User defined picture adjustment.
COLOR TONE- Select from four presets or create a user de-
fined color temperature.
CUSTOM- User defined
COOL 2- 7500°Kelvin
COOL 1- 7200° Kelvin
STANDARD- 6900° Kelvin
WARM 1- 6500° Kelvin
WARM 2- 6100° Kelvin
V-R171P-HDA Ussers Guidde
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
Use UP/DOWN/LEFT/RIGHT buttons to select function.
SEARCH AND TUNE FUNCTIONS ARE NOT USED ON
THE V-R171P-HDA
Use CCD functions for VIT close caption display
WINDOW
Use UP/DOWN/LEFT/RIGHT buttons to select function.
ASPECT RATIO -
Select Fill All to place image on the entire screen.
All video images will appear distorted
Select WIDE for 16:9 Aspect
Select ZOOM 1 for 5:4 Aspect
Select ZOOM 2 for 4:3 from 16:9
PIP FUNCTIONS - Used with PC selected as source to
add a window for video input. (PIP SOURCE)
PC Formats supported from VGA and DVI connectors
Video Formats Supported By Component and DVI Inputs
Resolution
H Frequency
( kHz )
V Frequency
( Hz )
Pixel Frequency
( MHz )
720x480 Interlaced
720x576 Interlace
720x480 Progressive
15.735 59.94 13.500
15.735 50.0 13.595
31.469 59.94 25.175
640x400
640x350
640x350
640x480
640x480
640x480
640x480
640x480
640x480
720x400
720x400
800x600
800x600
800x600
800x600
800x600
800x600
1024x768
1024x768
1024x768
1024x768
1024x768
1024x768
1280x720
1280x768
1280x768
1280x960
1280x960
1280x1024
1280x1024
1280x1024
1280x1024
37.861
85.08
31.5
31.469
37.861
31.469
35.000
34.940
37.861
37.500
43.269
31.469
37.927
35.156
37.879
43.764
48.077
46.875
53.674
48.780
48.363
56.476
57.703
60.030
68.677
47.760
47.700
60.150
60.000
59.640
63.337
63.981
64.754
63.600
70.087
85.08
59.94
66.667
69.884
72.809
75.0
85.008
70.087
85.039
56.25
60.317
70.02
72.188
75.0
25.175
31.5
25.175
30.24
28.513
29.765
31.5
1280x720 Progressive 44.964 59.94 74.176
1920x1080 Interlaced
33.750 60.0
74.25
36.0
28.322
35.5
Video Formats Supported by
Composite and S-Video Inputs
36.0
40.0
45.513
50.0
720x480 Interlaced
720x576 Interlaced
15.735
15.735
59.94
50.0
13.500
13.595
49.5
85.061
60.001
60.004
70.069
72.039
75.029
84.997
60.0
56.25
64.11
65.0
75.0
78.476
78.75
94.5
74.481
80.136
102.977
102.104
102.104
108.18
108.0
108.992
108.883
60.0
75.0
60.0
60.0
59.978
60.02
60.06
60.0
Marshall Electronics
5
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Standard Accessories
• Users manual
Accessories Supplied with the V-R171P-HDA:
• “Brick” type 12VDC power supply with 4 Pin Female XLR connector
• “V” Mount battery adapter
• VESA 75 Mount
9
Optional Accessories
Desk Stand
Use for Desk Top
Wall Mount
V-LCD17-TV-WM
Attaches monitor to Wall
Ceiling Mount
Power Adapter Cable
V-LCD17-TV-CM
V-PAC-D
Attaches monitor to ceiling
Use with Anton Bauer D-type connection
Power Adapter Cable
V-PAC-XLR
Use with Anton Bauer D-type connection
Sequential
2 channel charger
IDX-VL-2Plus
Combination unit is a 2-channel sequential charger with a
built-in 60W power supply. Charges 2 ENDURA E series
batteries in fewer than 5 hours. One 10’ XLR cable included.
Sequential
IDX-VL-4
IDX-VL-4S
IDX-E7S
IDX-E7
Economically charges 4 ENDURA E series batteries in
under 6 hours using Full Power Charge (FPC) method
4 channel charger
Charges 4 ENDURA E series batteries in 2.5 hours or less.
V-Mount battery pack with 3 LED power Indicator
Simultaneous
4 channel charger
55 W Lithium Battery
V-Mount Battery Pack with PowerLink includes accurate
Power Status Display and supports Digi-View
55 W Lithium Battery
with Power Link
82 W Lithium Battery
IDX-E10S
IDX-E10
V-Mount battery pack with 3 LED power Indicator.
82 W Lithium Battery
with Power Link
V-Mount Battery Pack with PowerLink includes accurate
Power Status Display and supports Digi-View
Analog to Digital
Converter
BC-0909-AD
Converts analog Composite, YC, or Component video to
HDSDI/SDI
Digital to Analog
Converter
BC-0909-DA
V-HWP-K
Converts SDI/HDSDI to analog Composite, YC, or
Component video
Cleaning Wipes
Package of 10 non-toxic, antistatic, alcohol and ammonia
free cleaning wipes.
Download from Www.Somanuals.com. All Manuals Search And Download.
|