Model PMD671 User Guide
Portable Solid State Recorder
®
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
WARNINGS
Do not expose the equipment to rain or mois-
ture.
•
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to meet strict quality
and safety standards. There are, however, some installation and op-
eration precautions which you should be particularly aware of.
•
•
Do not remove the cover from the equipment.
Do not insert anything into the equipment
through the ventilation holes.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with
the manufacture’s instructions.
•
•
Do not handle the mains lead with wet hands.
Do not cover the ventilation with any items such
as tablecloths, newspapers, curtains, etc.
8. Do not install near any heat sources such as radiators, heat reg-
isters, stoves, or other apparatus (including amplifiers) that pro-
duce heat.
•
•
No naked flame sources, such as lighted
candles, should be placed on the equipment.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particu-
larly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
When disposing of used batteries, please
comply with governmental regulations or
environmental public instruction's rules that
apply in your country or area.
•
•
•
•
Do not place anything about 0.1 meter above
the top panel.
11. Only use attachments/accessories specified by the manufacturer.
Make a space of about 0.1 meter around the
unit.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the manu-
facturer, or sold with the apparatus. When
a cart is used, use caution when moving
the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
No objects filled with liquids, such as vases,
shall be placed on the apparatus.
When the switch is in the OFF position, the
equipment is not completely switched off from
MAINS.
14. Refer all servicing to qualified service personnel. Servicing is re-
quired when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
When setting up the recorder ensure that:
•
it will not be exposed to interference from
external equipment.
•
it will not be exposed to electrostatic dis-
charges.
Additional Safety Information!
•
•
•
This product should not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
Apparatus shall not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be placed on
the apparatus.
•
•
it will not be exposed to direct sunlight.
heavy objects are not placed on the recorder.
When the switch is in the OFF position, the apparatus isn’t com-
pletely switched-off from the MAINS.
Copyright
Recording and playback of any material may require
consent. For further information refer to the following
US ordinances:
• Copyright act of 1956
• Dramatic and Musical Performance Act 1958
• Performers Protection Acts 1963 and 1972
• any subsequent statutory enactments and orders
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
CE marking (only EU version)
English
This product is in conformity with the EMC directive and low-voltage directive.
Français
Cet appareil est conforme á la directive EMC et á la de directive sur les basses
tensions.
Deutsch
Dieses Greät entspricht den EMC-Richtlinien und den Richtlinien für
Niederspannungsgeräte.
Nederlands
Dit apparaat voldoet aan de EMC-richtlijnene en de richtlijnen vooor apparatuur
met laag voltage.
Italiano
Quest' unitá è conforme alle diretive EMC ed alla direttiva sulle basse tensioni.
Português
Esta unidade está em conformidade com as directivas EMC e as directivas de
baixa voltagem.
Español
Esta unidad estáde acuerdo con las normas EMC y las relacionadas con baja
tensión.
Equipment mains working system
This product complies with household power and safety requirements in your area.
SI DICHIARACHE L’APPARECCHIO SINTO-AMPLIFACATORE SR-39 RISPONDE
ALLE PRESCRIZIONI DELL’ART. 2 COMMA1 DEL D.M. 28AGOSTO 1995 N° 548.
MARANTZ EUROPE B.V.
5600 EINDHOVEN
THE NETHERLANDS
FATTO A EINDHOVEN, IL 1/1/1997.
“Este aparato lleva elementos antiparasitarios necesarios para cumplir con ls limites
que se estableren en elAnexo V del Reglamento sobre Pertubaciones Radioelectricas e
Interferencias aprobado en el Real Decreto 138/1989. (B.O.E. de 9 Febrero 1989).”
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start
2. Slide the POWER switch to the right and release.
Follow the instructions on this page to Quick Start your
new PMD671 Portable Solid State Recorder and begin
recording.
POWER
Note: Outside of the USA, a CF card is not included.
See page 49 for installing a CF card and page 21 to
format a CF card.
On first power up, wait
for the PMD671 to
initialize.
TOTALTRACKTIME
REC REMAIN kbps
A-B
Quick Start Basic Instructions
L
-dB
R
00
20
12
0
over
40
6
2
kHz
AM
PM
L
R
A full display will
appear momentarily.
MIC
S.SKIP
-dB
INT
MIC
LINE
TRACK
MARK
2
2
1
1
3
3
1
GND
2
3
COLD
HOT
DC IN 15V
L
-dB
R
The display will change
to Loading then to
Reading.
00
40
20
12
6
2
0
over
c.
-dB
STOP
g.
a.
CANCEL
The display will change
to BlankCard for a
newly formatted CF
card.
L
-dB
R
00
40
20
12
6
2
0
over
REC
-dB
MIC
e.
POWER
b.
REC PAUSE
d. f.
3. Connect your microphones (see p 53), then slide
the REC button to the right and release.
Recording begins.
a. Plug the AC adapter in.
b. Slide the POWER switch to turn on.
c. Connect your microphones.
d. Slide the REC switch to start recording.
e. Push and release REC PAUSE when record-
ing is not necessary.
REC
a
The Rec indicator (a)
will be lit and steady
while recording.
c
The display will
show the recording
time (b) of the
f. Slide the REC switch to resume recording.
g. Push the STOP button to stop recording.
b
TRACK TIME
L
-dB
R
Quick Start Detailed Instructions
00
40
20
12
6
2
0
over
-dB
MIC
TRACK
The PMD671 comes with factory preset defaults for
MP3 recording using external microphones. These
settings are for recording a vocal or musical perfor-
mance. Quick Start ignores changing any of these
presets. Battery installation is not required.
current track (c).
4. Push and release the STOP button to stop record-
ing and end the track (close the audio file).
STOP
1. Unpack the AC power pack, power cord and the
PMD671.
a. Plug the AC power pack
into household power.
The display will
TIME
L
-dB
R
REC REMAIN
00
40
20
12
6
2
0
over
show the remaining
recording time at
current settings for
the CF
-dB
MIC
example shows 4 hours 21 minutes and 02 seconds
remaining
DC IN 15V
card.
To transfer audio files to your computer:
transfer the CF card, see page 49,
or
connect via USB, see page 51.
b. Plug the power jack into the PMD671 at DC IN
15V.
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Precautions
How to format a CF card ..................... 21
How to check a CF card ...................... 22
TRACK JUMP buttons............................ 23
Warnings and Cautions ........................... 2
Important Safety Instructions ................... 3
CE markings ............................................ 4
Quick Start ................................................... 5
Table of Contents ......................................... 6
US/Europe models ....................................... 7
Package Contents........................................ 7
Control and Connection Diagrams
TRACK JUMP reverse button
REC UNDO button .............................. 23
TRACK JUMP forward button ....... 23
....... 23
-/F.REV button
F.FWD/+ button
MARGIN RESET/
.................................... 23
.................................. 23
USB MENU/STORE button ................... 24
MARGIN RESET button ............................ 24
USB button ................................................ 24
MENU/STORE button ........................... 24
MENU operations ....................................... 24
Select Preset ............................................. 24
Menu settings ............................................ 25
How to set or change the
Top ........................................................... 8
Front ........................................................ 9
Left side ................................................... 9
Right side................................................. 9
Bottom ..................................................... 9
Display ..................................................... 10
Introduction .................................................. 10
Features ....................................................... 12
Controls and Connections
Date / time ................................................. 26
Date Form ................................................. 27
Beep .......................................................... 28
A.PowOff ................................................... 28
Batt Type ................................................... 29
RecFormat ................................................ 30
Digi-IN Rec Format ................................... 34
RAW Mode ................................................ 34
Verify ......................................................... 35
PupPreRec ................................................ 35
St Mode ..................................................... 36
Mono Mode ............................................... 37
Auto Mark .................................................. 37
Manual TR................................................. 38
Auto TRK................................................... 39
SeamlsPly ................................................. 40
SilentSkp ................................................... 40
Auto Cue ................................................... 41
S.Monitor ................................................... 42
SinglePly ................................................... 43
Remote Mode............................................ 44
Broadcast Wave ID numbers .................... 44
Default ....................................................... 45
PLAY/PAUSE /
Top ............................................................ 13
Speaker .................................................. 13
MIC (internal microphone)...................... 13
POWER switch....................................... 13
Security cover ........................................ 13
Recording setup controls
MONITOR switch ................................... 13
PRE REC switch .................................... 15
INPUT LOCK switch............................... 15
AUDIO OUT switch ................................ 15
MIC ATTEN switch ................................. 15
REPEAT switch ...................................... 15
ANC switch............................................. 16
EDL PLAY switch.................................... 16
LEVEL CONT. switch ............................. 16
INPUT button.......................................... 17
What the Input selections do ............... 17
Inputs / channels recorded .................. 17
A-B REPEAT button ............................... 18
A-B Repeat playback......................... 18
MARK/ EDIT buttons ........................... 18
EDL Marks .......................................... 18
Adding EDL Marks ........................... 18
Locating EDL Marks ........................ 18
Custom playback sequences........... 19
Editing EDL Marks ........................... 19
EDL A-B looping .............................. 19
EDIT button ..................................... 20
Edit mode ........................................ 20
How to renumber tracks ................... 20
How to erase tracks.......................... 20
How to erase all EDL marks
ENTER button
PLAY/PAUSE button
ENTER button ................................. 46
STOP/CANCEL button ......................... 46
Front
.................................... 46
........................ 46
HP/SP VOLUME control ........................... 47
Display ...................................................... 47
REC PAUSE button ............................... 47
REC indicator ............................................ 47
REC switch................................................ 47
within one track ................................ 21
How to erase all EDL marks ................ 21
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Package contents
REC LEVEL controls ................................. 47
PHONES jack............................................ 48
DISPLAY button ........................................ 48
LIGHT button............................................. 48
KEY LOCK switch ..................................... 49
Left side
• PMD671
CHARGE indicator .................................... 49
CF card compartment ............................... 49
To eject a CF card .................................. 49
To insert a CF card ................................. 49
Security .................................................. 50
DIGITAL IN/OUT jacks .............................. 50
DC IN 15V jack.......................................... 50
USB port.................................................... 50
How to connect via USB port .............. 51
Right side
• 64MB CF card (US only)
(shipped formatted and
installed)
• AC power pack
• power cord
REMOTE1 jack ......................................... 52
Remote Mode........................................ 52
REMOTE2 jack ......................................... 52
LINE OUT/IN jacks .................................... 52
MIC IN jacks .............................................. 53
PHANTOM +48V switch ............................ 53
Microphone recommendations ........... 53
Carry studs ................................................ 53
Installing the carry strap ..................... 53
Bottom
Europe models include 2 power cords
CEE
BS
• USB cable (3 ft)
Battery compartment ................................. 53
Battery power ....................................... 54
Installing AA size batteries ............... 54
Installing/Changing an optional
• AA battery carrier
Ni-Cd or Ni-MH battery...................... 54
Display ........................................................ 55
Care and maintenance................................. 56
Recording time chart .................................... 57
Rec Format charts........................................ 58
Menu defaults............................................... 59
Troubleshooting ........................................... 60
Error Messages............................................ 60
Specifications ............................................... 61
Optional accessories.................................... 61
Record setting recommendations ................ 61
Warranty....................................................... 62
• Carry strap
• Carry strap retainers (2)
• Security screws (3)
ISO 3x10 (3mm x 10mm long)
For Memory compartment door (1)
or Security cover (2 spares)
• Plastic pin and retainer
(spare -
for Memory compartment door)
US/Europe models
• CD
The US model PMD671/UIB distributed in the USA, and
European model PMD671/N1B distributed elsewhere,
differ slightly in supplied accessories and default
settings. Those differences are noted in this User Guide.
Contents of the CD may vary.
Contents usually include:
• PDF format manual(s)
Several languages may be included.
• Demonstration copy of PMDEdit software
• Instructions for obtaining full copy of PMDEdit
MODEL NO. PMD671/UIB
or
MODEL NO. PMD670/U1B
• This User Guide
MODEL NO. PMD671/N1B
• Customer Registration Document
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Control and Connection Diagrams
#
Top
Control
Page
1
2
1
2
3
4
Speaker ..................................................... 13
MIC (internal microphone)......................... 13
POWER switch.......................................... 13
Security cover ........................................... 13
SOLID STATE RECORDER PMD671
STEREO
0dB
-20dB
SOURCE
FILE
L
R
Setup controls
MIC ATTEN
FLAT
MONITOR
OFF ON
AUDIO OUT
SINGLE
ALL
OFF
5
6
7
8
9
MONITOR switch ...................................... 13
PRE REC switch ....................................... 15
INPUT LOCK switch.................................. 15
AUDIO OUT switch ................................... 15
MIC ATTEN switch .................................... 15
PRE REC
OFF
ANC
LIMITER
MANUAL
OFF
ON
ON
ALC
INPUT LOCK
LEVEL CONT.
EDIT
EDL PLAY
INPUT
A-B REPEAT
MARK
-
/
REW
TRACK JUMP
FWD
/
+
REC
UNDO
MARGIN RESET
PLAY
/
PAUSE
STOP
POWER
USB
MENU/STORE
ENTER
CANCEL
10 REPEAT switch ......................................... 15
11 ANC switch................................................ 16
12 EDL PLAY switch....................................... 16
13 LEVEL CONT. ........................................... 16
14 INPUT button............................................. 17
15 A-B REPEAT button .................................. 18
MARK/ EDIT controls
3
4
16 Mark reverse button .................................. 18
17 MARK/ EDIT button ................................ 18
18 Mark forward button .................................. 18
Record/Playback controls
EDIT
INPUT
A-B REPEAT
MARK
19 TRACK JUMP reverse button
8
(playback).................................................. 23
REC UNDO button (record) ...................... 23
20 TRACK JUMP forward button
STEREO
L
0dB
-20dB
SOURCE
FILE
R
9
10
11
12
5
6
MONITOR
MIC ATTEN
FLAT
AUDIO OUT
SINGLE
OFF
ON
OFF
ALL
(playback).................................................. 23
21 -/F.REV button
22 F.FWD/+ button
23 MARGIN RESET/
.................................... 23
.................................. 23
ANC
PRE REC
OFF
REPEAT
ON
OFF
LIMITER
ALC
MANUAL
ON
13
7
INPUT LOCK
EDL PLAY
LEVEL CONT.
EDIT
USB MENU/STORE button
INPUT
A-B REPEAT
MARK
MARGIN RESET button (playback) .......... 24
USB button ................................................ 24
MENU/STORE button ........................... 24
14 15
16 17
18
22
24 PLAY/PAUSE button
(playback) ......... 46
19 20
21
ENTER button
(menu) ........................ 46
25 STOP/CANCEL button .......................... 46
-
/
F.REV
F.FWD
/
+
TRACK JUMP
MARGIN RESET
REC
UNDO
PLAY / PAUSE
STOP
ENTER
CANCEL
USB MENU/STORE
23
24
25
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
#
Control
Page
Front
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
HP/SPK VOLUME control ...................... 47
Display (see next page) ......................... 47
REC PAUSE button ............................ 47
REC indicator. ........................................ 47
REC switch............................................. 47
REC LEVEL controls .............................. 47
PHONES jack......................................... 48
DISPLAY button ..................................... 48
LIGHT button.......................................... 48
REC PAUSE
DISPLAY
REC
L
HP/SPK VOLUME
PHONES
R
REC
LEVEL
LIGHT
KEY LOCK
7
8
9
10
10 KEY LOCK switch .................................. 49
Left side
11
12
13
11 CHARGE indicator ................................. 49
12 CF card compartment ............................ 49
13 DIGITAL IN/OUT jacks ........................... 50
14 DC IN 15V jack....................................... 50
15 USB port................................................. 50
CHARGE
DIGITAL
IN
DC IN 15V
USB
OUT
14 15
Right side
16 REMOTE 1 jack ..................................... 52
17 REMOTE 2 jack ..................................... 52
18 LINE IN/OUT jacks ................................. 52
19 MIC IN jacks ........................................... 53
20 PHANTOM power switch........................ 53
21 Carry studs ............................................. 53
16
17 18
19
20
L
PUSH
REMOTE
REMOTE
2
LINE
IN
PUSH
R
MIC
PHANTOM
+48V
ON
L
1
2
2
1
1
3
3
R
OFF
1
2
3
GND
HOT
COLD
21
Bottom
22 Battery compartment .............................. 53
22
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2 3 4 5 6 7 8
9
10 11 12 13 14
TOTALTRACKTIME
REC REMAIN kbps
A-B
L
-dB
R
00
12
0
20
over
40
6
2
kHz
AM
PM
-dB
S.SKIP
INT
MIC
LINE
TRACK
MARK
15 16
17
18
19 20 21 22 23 24 25 26
#
Control
Page
Introduction
Display
Thank you for selecting the Marantz Professional
PMD671 Portable Solid State Recorder. The
PMD671 is an audio recorder that records in
digital audio formats onto a Compact Flash™
memory card (CF card) or Microdrive™.
1
2
3
4
5
6
7
8
9
REC label ............................................... 55
TOTAL label............................................ 55
REMAIN label........................................ 55
TRACK label .......................................... 55
TIME label .............................................. 55
kbps label ............................................... 55
A-B label................................................. 55
Upper alphanumeric display................... 55
AM/PM label ........................................... 55
Compact flash memory cards, also used in digital
cameras, are widely available at consumer elec-
tronics retailers and computer resellers.
10 kHz label ................................................ 55
11 L -dB R level meter labels ..................... 55
12 Left level meter....................................... 55
13 -dB over scale ....................................... 55
14 Right level meter .................................... 55
15 TRACK label ......................................... 55
16 MARK label ............................................ 55
17 Lower alphanumeric display................... 55
18 INT MIC label ......................................... 56
19 LINE label............................................... 56
Audio inputs may be from:
• the built-in microphone,
• condenser or dynamic microphone(s) con-
nected to the XLR jacks,
• line level audio sources connected to the LINE
IN jacks, or
• digital audio sources in SP/DIF format con-
nected to the DIGITAL IN jack.
Audio outputs may be from:
• the built-in speaker,
• headphones connected to the PHONES jack,
• analog audio devices such as an amplifier or
other device connected to the LINE OUT
jacks, and/or
20 Record
21 Play
.............................................. 56
................................................... 56
............................................... 56
.......................................... 56
22 Pause
23 Battery
24 S. SKIP label .......................................... 56
25 Margin level ............................................ 56
26 -dB label ................................................. 56
• digital audio devices using SP/DIF format
connected to the DIGITAL OUT jack.
Computer compatible
Hint:
When making major changes to your recording setup,
we suggest the following procedure:
The PMD671 records directly onto CF cards.
Recordings can be transferred to your desktop or
laptop computer by removing the CF card from
the PMD671. You may also use the supplied cable
to connect the PMD671 to your computer via the
USB port. Audio recorded in the popular MP3
compression format is directly available for intra-
net or internet file sharing.
1. Identify the appropriate input device (internal
microphone, microphone(s), Line input, Digital
input).
2. Select the input menu choice corresponding to
your input device selection. (See page 17.)
3. If necessary, set or change the Rec Format
parameters for your recording situation. (See
page 30.)
You can:
• log and archive audio files
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
• play audio files on your computer
• save audio files to:
• your hard drive
making 24 bit recordings. Simultaneous availability depends
on recording conditions. See page 14.
• Security – CF cards
• a floppy
• a CD-R disc
• post streaming audio files on your web site
• use software and your computer to transcribe
digital recordings
For added security, the CF card compartment
door can be secured with a screw. This is
especially recommended if you transfer audio
files via the USB cable.
An editing program (PMDEdit, available from
Marantz Professional for PC users) lets you
convert and edit audio files that were recorded
on the PMD671.
• Security – Input settings
After you have set up the input settings* for
your application, the settings can be set to ON
with the INPUT LOCK switch.
Presets
The PMD671 has three selectable Presets for
commonly used recording situations.
Preset 1, MP3 Stereo using your microphones,
for recording with relatively small files.
Preset 2, MP3 Mono using the internal micro-
phone, for recording meetings or voice with very
small files.
As an added precaution, the input setting
switches (including the ability to change input
devices) can be protected with the supplied
screw-on cover preventing unintentional
changes.
*Settings for recording meetings for example, will usually be
the same from meeting to meeting.
Preset 3, PCM Stereo using your microphones,
for very high quality audio recording.
Voice recording
• Security – recording
The PMD671 has several helpful features for
voice recording in situations such as meetings,
conferences or other events.
The PMD671 has several security features, not
previously available on Marantz Professional
digital recorders, that confirm recording is
accurately written to the CF card.
• Use less memory (longer recording time)
For voice recording, the recording quality level
(bit rate recorded and/or sampling frequency)
can be set to the lowest levels. This permits
more time recorded on the CF card.
• Verify
Verify is electronic file verification. When
turned on in the Preset menu, Verify runs a
check between the audio at the source and
information written to the CF card.
• Easy recording
One control begins recording. Simply slide and
release the red REC switch.
• RAW
RAW (Read After Write / VTH - Virtual Third
Head) digitally mimics the third head of a
three head tape deck. While recording, audio
at the PMD671's outputs is audio that has
already been written to the CF card. With
about a 2 second delay, you can listen to the
audio written to the CF card, monitoring that
recording is actually taking place.
Playback aids
A common problem with lengthy voice or other
recordings is difficulty in locating one or more
specific passages for playback. The PMD671
has several ways to mark or tag specific record
starting points.
• Date and time
A built-in date and time generator marks the
beginning of each track.
• Time Shift Playback
Time Shift Playback allows you to listen to
audio from anywhere on the CF card while
simultaneously recording the current source.
• Tracks
An audio recording is called a "track" when on
the PMD671 and an audio "file" when on your
computer.
Note:
These recording security features are not available when
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Tracks are numbered from 01 to a maximum of
999.
• Stereo (2 channels) and mono (1 channel)
audio recording and playback.
• Records onto various types of CF cards.
(Please refer to the Marantz Professional
recommended cards.)
• Two different recording formats:
• Compressed recording using MPEG1 Layer
II (MP2) or MPEG1 Layer III (MP3) mono
and stereo.
A new track (file) is automatically started each
time recording is stopped using the STOP
button.
Using the "Auto TRK" feature, PMD671 can be
set to start a new track at specific time intervals
during recording (for example every minute).
Using the "Manual TR" feature, you can start a
new track during recording by sliding and re-
leasing the REC switch.
• Uncompressed recording using 16-bit or 24-
bit linear Pulse Code Modulation (PCM).
16-bit 44.1kHz PCM recordings are standard
CD quality.
24-bit 96kHz PCM recordings are high
quality recordings used in professional audio
and film studios.
• MS-DOS™ and Windows compatible file
system.
• Selectable file types:
• Automatic recording
The PMD671 can be set to stop recording when
there is silence (SilentSkp feature) and auto-
matically start when sound resumes. The
PMD671 can be set to automatically add an
EDL mark (Auto Mark feature) to the track at
each such starting point.
• EDL marks*
• Wave (.wav)
• Broadcast Wave Format (.bwf or .wav)
• MP2 (.mpg)/MP3 (.mp3).
• Recording bit rate is selectable:
• .mpg/mp3 compressed at 32kbps (recom-
mended for dictation),
EDL (Edit Decision List) marks can be created
during recording manually or automatically. EDL
marks help you find those specific points in the
recording.
*The EDL marking system is proprietary to Marantz Profes-
sional solid state recorders.
32, 48 or 64kbps (recommended for voice
recording), or
128 or 192 kbps (recommended for recording
music)
• During playback, you can search for EDL
marks in forward or reverse.
• You can change an EDL mark into a skip mark
or an A-B repeating point. That option allows
you to create custom playback sequences
which include skipping or repeating audio
between EDL marks.
• PCM (.wav) uncompressed (very high quality
mono audio recording)
• PCM (.wav) uncompressed 24 bit/96kHz
(stereo) (recommended for very high quality
audio recording)
• Manual, manual with limiter and automatic
record level control (ALC).
• An ANC (Ambient Noise Cancel) switch for
reducing unwanted background noise.
• Electronic 'Read After Write' monitoring (time
shift) feature.
• Automatic electronic file verification feature
(Verify).
• CF card compatibility check feature (Card
Check).
• Up to 255 EDL marks can be added to a CF
card. EDL marks are numbered consecutively
starting at one. During recording, you can
manually add an EDL mark by pressing
MARK. EDL marks can be added automati-
cally, for example, at the beginning of each
track.
• PMDEdit computer software is specifically
designed for the PMD671. PMDEdit recog-
nizes EDL marks generated by the PMD671.
This is especially useful for editing audio files
information.
• Pre-Recording memory buffer that records 2 to
4 seconds* of audio before recording is
started.
*Normally 4 seconds. Depends on Rec Format settings.
• Portions of multiple recordings can be played
back in sequence using EDL marks.
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
• There are four ways to power the PMD671:
• Included AC adapter
• AA Alkaline batteries (~ 5 hours @ 1450 mAh
usage)
• Optional rechargeable Ni-Cd battery pack
RB1100 (~ 4 hours @1100 mAh usage).
• Optional rechargeable Ni-MH battery
RB1651 (~ 6 hours @1650 mAh usage).
• Built-in Time and Date generator marks the
beginning of each track.
When first powered up, the PMD671 takes some
time to initialize.
L
Loading is displayed,
then the screen goes
blank momentarily.
00
20
12
0
over
40
6
2
-dB
R
-dB
L
-dB
R
Reading is displayed
while the CF card is
read.
00
40
20
12
6
2
0
over
-dB
• REMOTE1 jack permits a wired remote button
for controlling the recording process.
• REMOTE2 jack permits using the optional
RC600 remote for microphone interviews.
Security cover
Use a small Phillips screw-
driver to remove or replace
the Security cover.
The Security cover makes
setup controls relatively unavailable. The setup
Controls and Connections
1
2
controls allow you to setup the PMD671 for your
unique application. You can then have someone
operate the PMD671 without concern that they
SOLID STATE RECORDER PMD671
STEREO
0dB
-20dB
SOURCE
FILE
L
R
MIC ATTEN
FLAT
MONITOR
OFF ON
AUDIO OUT
SINGLE
might change something that could cause failure
to record.
ALL
OFF
PRE REC
OFF
ANC
LIMITER
MANUAL
OFF
ALC
ON
ON
INPUT LOCK
EDL PLAY
LEVEL CONT.
EDIT
INPUT
A-B REPEAT
MARK
TRACK JUMP
-
/
REW
FWD
/
+
REC
UNDO
MARGIN RESET
PLAY
/
PAUSE
STOP
POWER
Note: Two 3mm machine screws
10mm long are used for the
security cover.
USB MENU/STORE
ENTER
CANCEL
3
4
Top
Recording setup controls
STEREO
L
1. Speaker
0dB
-20dB
SOURCE
FILE
R
5
The played back audio signal is simulta-
neously output to the built-in speaker, the
PHONES jack, LINE OUT jacks and DIGITAL
OUT jack. Headphones plugged into the
PHONES jack mute the internal speaker. The
HP/SPK VOLUME control controls the built-
in Speaker and Headphone volume.
MONITOR
OFF ON
MIC ATTEN
FLAT
AUDIO OUT
SINGLE
OFF
ALL
ANC
PRE REC
OFF
REPEAT
ON
OFF
LIMITER
ALC
MANUAL
ON
INPUT LOCK
EDL PLAY
LEVEL CONT.
EDIT
INPUT
A-B REPEAT
MARK
SOURCE
FILE
5. MONITOR switch
This switch turns the Read
After Write or Time Shift
Playback* feature on or off.
2. MIC (internal microphone)
MONITOR
*Depending on the setting of RAW mode in the Menu.
POWER
3. POWER switch
When RAW Mode is at MONITOR, and the
MONITOR switch is at FILE when recording
begins, Read After Write is on.
Slide to the right and release
to turn Power on or off.
If the AC power pack is
connected at DC IN and plugged in, it powers the
PMD671.
When RAW Mode is at TimeShft, and the MONI-
TOR switch is at FILE when recording begins,
the Time Shift feature is on.
If power is not detected at DC IN, battery power is
automatically used if available.
continues
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
RAW (VTH - Virtual Third Head)
When the Time Shift feature is on and the MONI-
TOR switch is set to file, as you begin recording
the outputs (for example headphones) monitor
the source. While recording is in progress, you
RAW (Read After Write / VTH - Virtual Third
Head) digitally mimics the third head of a three
head tape deck. When on and the PMD671 is
recording, the audio that is output to the LINE
OUT, DIGI OUT, PHONES and SPEAKER is
audio that has already been written to the CF card
and not audio from the source. This allows you to
actually listen to audio written to the CF card,
monitoring that the recording is actually taking
place. When RAW is off, the audio to the LINE
OUT, DIGI OUT, PHONES and SPEAKER is
actually the source you are recording.
can press and release the -/F.REV button
to
search back through and play the file that is being
recorded (to the point you began the Time Shift).
Audio played back through the headphones can
be anywhere on the CF card. You can use the
TRACK JUMP reverse
or TRACK JUMP
forward buttons to change tracks.
Press and release the PLAY/PAUSE button
to return to monitoring the current recording.
Time Shift (Time Shift Playback)
Time Shift Playback works just like RAW, in that it
monitors audio that has already been recorded to
the CF card. However, Time Shift allows you the
ability to listen to audio from anywhere on the
card while simultaneously recording the current
audio source.
Notes:
•
In some instances, Verify and RAW or Time Shift are
available simultaneously (see charts below).
When using RAW (Read After Write) to monitor informa-
tion already written to the CF card, the audio played
back will be about 2 seconds behind current events.
RAW and Time Shift are only available individually.
Never at the same time.
Not available when making 24-bit recordings. RAW
and Time Shift are not available when making 24-bit
recordings.
•
•
•
FILE: During recording, output to the PHONES
and LINE OUT jacks is read from the CF card.
SOURCE: During recording, output to the
PHONES and LINE OUT jacks is the audio
source being recorded.
The chart below details which features are avail-
able during which RecFormats.
PCM 16-bit PCM 24-bit
MP3
MP2
n/a
Factory defaults: MONITOR switch: SOURCE,
Presets 1, 2, and 3: RAW at MONITOR.
Verify
n/a
RAW, Time Shift
n/a
Notes:
•
Additionally, Verify is available for use at the same
time as RAW (Read After Write) or Time Shift
(Time Shift Playback) in the following circum-
stances:
Active level meters verify that an audio source is being
received by the PMD671.
•
Another way to verify that audio is being recorded is to
turn on the VERIFY menu choice (see page 35). When
VERIFY is ON, the PMD671 constantly compares the
recorded information to the source input. It verifies that
the file written to the card is exactly what was input.
MONITOR is not available in 24 bit recording, or
available for MP2.
PCM 16-bit with
RAW / Time Shift
MP3 with RAW /
Time Shift
PCM 24-bit
•
•
•
Verify
MONITOR is available for 16 bit PCM recording and
MP3.
An audio drop out may occur when using RAW at high
bit rates in MP3.
Time Shift lets you select the Read After Write
time delay. Time Shift playback allows you to play
audio that has already been recorded from any-
where on the CF card while simultaneously
recording the current audio. This is useful in
applications such as court recording.
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
STEREO
L
8
8. AUDIO OUT switch
This switch selects the audio
output channel for playback.
R
STEREO
L
0dB
-20dB
SOURCE
FILE
R
AUDIO OUT
9
10
MONITOR
OFF ON
MIC ATTEN
FLAT
AUDIO OUT
SINGLE
OFF
ALL
Applies to playback output to LINE OUT, DIGITAL
OUT, and Internal speaker or headphones.
6
ANC
PRE REC
OFF
REPEAT
ON
OFF
LIMITER
ALC
MANUAL
ON
7
INPUT LOCK
EDL PLAY
LEVEL CONT.
EDIT
L: Audio recorded on the Left channel is output to
both the left and right output channels.
a
INPUT
A-B REPEAT
MARK
STEREO: Audio recorded on the Left channel is
output to the left output channel, and audio
recorded on the Right channel is output to the
right output channel. Both channels are output to
the internal speaker.
OFF
ON
6. PRE REC switch
This switch lets you turn
off pre record cache if it
is not desired.
PRE REC
When power is on and the PMD671 is in REC/
PAUSE the recorder is constantly saving about 4
seconds* of audio input. This is called pre record
cache. When recording is resumed from REC
PAUSE by sliding the REC switch, the pre-
recorded seconds are recorded.
R: Audio recorded on the Right stereo channel is
output to both the left and right output channels.
Factory default: ANALOG OUT switch at STE-
REO.
0dB
-20dB
9. MIC ATTEN switch
The microphone attenuation
switch permits the direct use
of microphones that differ in
sensitivity.
OFF: Turns the pre-record cache off.
ON: Leaves the pre-record cache on.
*Cache time varies with recording conditions:
MIC ATTEN
•
•
•
24-bit PCM – 1 second
16-bit PCM, MP2, MP3 – 4 seconds
16-bit PCM, MP3 with RAW – 2 seconds.
0dB: No microphone attenuation.
-20dB: Input from a microphone(s) connected to
the XLR MIC IN jacks is cut by -20dB.
Factory default: PRE REC switch at ON.
OFF
ON
7. INPUT LOCK switch
The INPUT LOCK switch
lets you lock your selected
input settings with a switch
covered by the Security
cover.
Factory default: MIC ATTEN switch at 0dB.
SINGLE
INPUT LOCK
OFF
ALL
10. REPEAT switch
Lets you endlessly repeat
playback of a track or entire
memory card.
REPEAT
OFF: When the INPUT LOCK switch is at OFF,
push and release the INPUT button (a) to tab
through the input choices. The selection “times
out” to the displayed input choice in 3 seconds.
TIME
OFF: No repeat.
SINGLE: During playback, the current track is
repeated. When playback reaches the end of the
track, it automatically starts playback from the
beginning of that track.
L
-dB
R
REC REMAIN
00
40
20
12
6
2
0
over
-dB
MIC
Example
display
ALL: During playback, all tracks are repeated.
When playback reaches the end of the last track,
it automatically starts playback from the beginning
of the first track.
MIC
ON: When the INPUT LOCK switch is at ON,
pushing the INPUT button (a) does nothing
(skips the input selection choices).
Factory default: REPEAT switch at OFF.
Factory default: INPUT LOCK switch at OFF.
Note:
For other methods of repeat playback, see the A-B REPEAT
button and/or EDL A-B looping (pages 18 and 19).
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
MARK switch at OFF, or no marks were placed manually),
playback is not available. Switch to OFF for playback.
STEREO
L
0dB
-20dB
SOURCE
FILE
R
MONITOR
OFF ON
MIC ATTEN
FLAT
AUDIO OUT
SINGLE
OFF
ALL
Factory default: EDL PLAY switch at OFF.
11
12
13
ANC
PRE REC
OFF
REPEAT
ON
OFF
LIMITER
ALC
MANUAL
ON
INPUT LOCK
EDL PLAY
LEVEL CONT.
EDIT
LIMITER
ALC
MANUAL
14
13. LEVEL CONT. switch
The LEVEL CONT(rol)
INPUT
A-B REPEAT
MARK
switch lets you select the
type of input level control.
LEVEL CONT.
11. ANC switch
FLAT
The ANC (Ambient Noise
Cancel) switch lets you
reduce ambient noise
MANUAL: At MANUAL, you control the input
level with the REC LEVEL controls.
ANC
before recording on the internal microphone or
MIC inputs.
LIMITER: At LIMITER, peak sound levels that
would distort the recording are limited.
Ambient Noise Cancel positions do not change
the memory used in recording. Examples of low
ambient noise sources include: traffic, air condi-
tioning hum and wind noise.
ALC: At ALC (Automatic Level Control = Auto-
matic Gain Control), the PMD671 automatically
responds to changes in input level. If recording is
quiet, the input level is increased. If recording is
loud, the input level is decreased. This is a desir-
able feature when recording a meeting with
several speakers. A speaker close to the micro-
phone and/or with a loud voice will be automati-
cally recorded at a reduced level and a quiet
speaker will be recorded at an increased level.
Both will be less likely to have their input missed.
:
Band pass position reduces the lows
and highs and passes (records) the center (voice
level) audio frequencies. This reduces the re-
cording of high and low frequency ambient noise.
FLAT: No filtering applied.
High pass position reduces low fre-
:
quency ambient noise only.
ALC is usually undesirable when recording music
(voice or instrument) because the transitions in
input level may be audible in the recording. ALC
can also make the recording ‘hissy’ by raising the
level during quiet passages and recording ambi-
ent noise.
OFF
ON
12. EDL PLAY switch
The EDL PLAY switch
turns EDL PLAY off or on.
The REC LEVEL controls do not work when the
LEVEL CONT. switch is set at ALC.
EDL PLAY
OFF: When the EDL PLAY switch is at OFF,
PMD671 playback does not respond to EDL
mark instructions.
14. INPUT button
The INPUT button lets you
INPUT
select the audio input and
audio channels for recording.
ON: When EDL PLAY is ON, PMD671 playback
follows EDL mark instructions regarding play-
back order, skipping sections of recording on the
memory card, or repeating a section of recording
on the memory card.
When the INPUT LOCK switch (a) is at OFF,
press and release the INPUT button to tab
through the input choices. When the desired
input is displayed, switch the INPUT LOCK
switch (a) to ON.
Note:
If the EDL PLAY switch is at ON and there are no EDL
marks on the CF card (recording was done with the AUTO
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
STEREO
L
0dB
-20dB
SOURCE
FILE
R
Use Preset 2 when using the internal micro-
phone. Use Preset 3 for digital input.
a
MONITOR
OFF ON
MIC ATTEN
FLAT
AUDIO OUT
SINGLE
OFF
ALL
ANC
PRE REC
OFF
Input device(s) and channels:
REPEAT
ON
OFF
LIMITER
ALC
MANUAL
ON
INPUT LOCK
EDL PLAY
LEVEL CONT.
Stereo with MIC input
EDIT
The microphone connected to the L MIC IN XLR
jack is recorded on the Left channel. The micro-
phone connected to the R MIC IN XLR jack is
recorded on the Right channel.
INPUT
A-B REPEAT
MARK
TIME
L
-dB
R
REC REMAIN
00
40
20
12
6
2
0
over
-dB
Example
display
MIC
L-Ste with INT MIC input
Stereo*
MIC
Mono audio input from the internal microphone is
recorded on the Left Channel, and the same
audio input is recorded on the Right Channel as a
"stereo" file.
*The stereo or mono mode displayed and recorded depends
on the St Mode and Mono Mode menu settings.
Note:
The PMD671 'listens' only to the selected input. For example
if the input selected is LINE input, and no input source is
connected to the LINE IN jacks, the PMD671 will record
silence.
Stereo with LINE input
Audio input from the L LINE IN jack is recorded
on the Left channel.
Audio input from the R LINE IN jack is recorded
on the Right channel.
What the input selections do:
Selects the input device(s)
Digi-IN
The input selection allows you to choose which
input(s) the PMD671 uses for recording. You
must select the Preset parameters that are
appropriate to the input. The PMD671 will
record with the Rec parameters you select, even
if they are inappropriate for the input. You can
use the default Presets for a quick and easy way
to set up for recording. Use Preset 1 for Stereo
recording using mic or line inputs.
Digital audio data at 44.1kHz, 48kHz or 96kHz
input through the DIGITAL IN jack can be re-
corded. Digital input always includes two chan-
nels. They are recorded as Left and Right stereo
channels.
Mono with MIC, INT MIC or LINE input
The input from the Left channel or internal micro-
phone is recorded as a mono file.
Inputs / channels recorded
Menu Selection
Mono Mode
INPUT Button
Selection
input (s)
connected
St. Mode
L-Stereo
Stereo
0-20db
Mono (L CH.)
LR Mono (Mix)
L
L
Internal
Microphone
INT MIC
INT MIC
N/A
INT MIC
INT MIC
INT MIC
INT MIC
R
INT MIC defaults to L-Stereo
R
L
L
L LINE IN
L LINE IN
N/A
L LINE IN
L LINE IN
—
L + R LINE IN
L LINE IN
L&R LINE IN
L LINE IN only
R LINE IN only
L&R MIC IN
R LINE IN
R
L LINE IN defaults to L-Stereo
R
L
L
L LINE IN
L LINE IN
N/A
Line
—
R
L LINE IN defaults to L-Stereo
R
L
L
—
—
N/A
R LINE IN
R LINE IN
R
—
defaults to L-Stereo
R
L
L
L
L MIC IN
L MIC IN
L MIC IN
L MIC IN
(-20db) R
L MIC IN
L MIC IN
—
L + R MIC IN
L MIC IN
R MIC IN
R
L MIC IN
R
L
L
L
L MIC IN
L MIC IN
L MIC IN
L MIC IN
(-20db) R
Mic
L MIC IN only
R MIC IN only
DIGITAL IN
—
R
L MIC IN
R
L
L
L
—
—
—
—
R
R MIC IN
R MIC IN
R
—
R
L
L
L
L DIGI IN
L DIGI IN
L DIGI IN
R DIGI IN
R
L + R DIGI IN
L + R DIGI IN
Digi-in
R DIGI IN
R
R DIGI IN
R
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
STEREO
L
0dB
-20dB
SOURCE
FILE
R
EDIT
16, 17, 18. MARK/
EDIT buttons
This button group
MONITOR
OFF ON
MIC ATTEN
FLAT
AUDIO OUT
SINGLE
OFF
ALL
MARK
ANC
PRE REC
OFF
REPEAT
ON
OFF
LIMITER
ALC
MANUAL
ON
controls EDL Marks and Editing functions.
INPUT LOCK
EDL PLAY
LEVEL CONT.
EDIT
EDL Marks
Mark functions: manually adding and locating
Marks.
INPUT
A-B REPEAT
MARK
15 16 17 18
15. A-B REPEAT button
While in playback, press and
release to start point A to point
B repeat playback.
Adding EDL Marks
Press and release the MARK/ EDIT button
during pause, recording, or playback to add an
EDL Mark. During recording, adding an EDL
Mark introduces an audible click in the recording
when using the internal microphone.
A-B REPEAT
A-B Repeat playback
Point A (starting point) is set when the A-B RE-
PEAT button is pressed and released. The next
press and release sets point B (ending point).
Playback repeats between A and B.
Locating EDL Marks
From Stop, press and release the Mark forward
button (18) or Mark reverse button (16) to tab
through the EDL marks on the CF card.
Note:
You can use the -/F.REV
or F.FWD/+
buttons
EDL Mark location as recording time
from the beginning of the track.
between setting the A and B points.
You cannot use the TRACK JUMP forward
or reverse
buttons.
TRACK TIME
Example display.
L
00
20
12
0
40
6
2
over
-dB
R
-dB
You can pause during A-B repeat playback by
pressing and releasing the PLAY/PAUSE button
. Resume A-B playback by pressing the
MARK
MARK dis-
played (instead
of TRACK)
EDL Mark
number
EDL Mark type
PLAY/PAUSE button
again.
Exit and cancel A-B repeat by pressing the STOP
button
To start playback from the displayed EDL Mark,
press and release the PLAY/PAUSE button
or pressing the A-B REPEAT button.
.
A-
TRACK TIME
A
L
Example display
when an A point
has been set.
00
20
12
0
40
6
2
over
-dB
R
-dB
TRACK
A-B
TRACK TIME
A-B
Example display
during A-B repeat.
L
-dB
R
00
40
20
12
6
2
0
over
-dB
TRACK
Note:
For other methods of repeat playback, see the REPEAT
switch and/or EDL A-B looping.
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit functions: editing EDL Marks to create
custom playback sequences, erasing and renum-
bering Tracks, and formatting the CF card.
Press and release the MARK/ EDIT button to
tab through the EDL Mark types: Point, Skip,
Loop_A, Loop_B and Erase. When the type you
want is flashing, press and release the ENTER
Custom playback sequences
button
.
EDL Marks are numbered consecutively from
001 and automatically renumbered when an
EDL Mark is added or erased. Playback is also
consecutive from the point that playback begins.
TRACK TIME
L
-dB
R
00
40
20
12
6
2
0
over
-dB
MARK
Writing will be displayed briefly, and the PMD671
will return to stop mode.
EDL Mark custom playback can:
Skip playback from the beginning of a 'Skip' EDL
Mark to the beginning of the next EDL Mark.
Skip
An EDL Mark changed to 'Skip' will be skipped
during EDL playback (playback with EDL PLAY
switch at ON). Playback will skip to the beginning
of the next EDL Mark.
A-B loop from a 'Loop_A' EDL Mark to a 'Loop_B'
EDL Mark.
EDL Marks are not automatically placed at the
beginning of tracks. If you want your custom
playback sequence to include track beginning
points, add EDL Marks to coincide with track
beginning points:
A skipped EDL recording is not erased. The
recording is still on the CF card. The skipped EDL
recording will play if the EDL PLAY switch is at
OFF. You can change the type later.
a. Start playback by pressing and releasing
PLAY/Pause
EDL A-B looping
To playback an EDL A-B loop, press the PLAY/
, and then pause playback
by pressing and releasing PLAY/Pause
again.
b. Press and release TRACK JUMP forward
PAUSE button
to begin playback, then press
and release the A-B REPEAT button.
If there is an error, for example there is an EDL
Mark of type Loop_A but no EDL Mark of type
Loop_B, an error message is displayed.
or TRACK JUMP reverse until the de-
sired track number is displayed.
c. Press and release the MARK/ EDIT button.
TRACK TIME
L
-dB
R
00
20
12
0
40
6
2
over
Example
display
Editing EDL Marks:
-dB
TRACK
All EDL Marks are initially entered as 'Point'
marks.
Only one EDL A-B loop can programmed. When
a 'Loop_A' or 'Loop_B' exists on a CF card and
another is created, the old mark automatically
changes to a 'Skip'.
From Stop display the EDL Mark by pressing and
releasing the Mark forward button (18) or Mark
reverse button (16) to tab through the EDL marks
on the CF card.
Erase
When an EDL mark is erased, the remaining EDL
marks are automatically renumbered from 1
through the number of EDL marks on the CF
card.
When the EDL mark to be edited is displayed,
press and release the MARK/ EDIT button. The
current EDL Mark type will be flashing.
TRACK TIME
L
00
40
20
12
6
2
0
over
-dB
R
Example
display
-dB
MARK
- 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TrkERASE is flash-
ing in the display.
EDIT
EDIT button
Press and hold the
EDIT button for
MARK
about 2 seconds to
enter Edit mode.
While TrkERASE is flashing (3 seconds) press
and release the ENTER button
.
Edit mode
Track number is
flashing in the
ERASE display.
Edit mode includes: Renumber (renumber
tracks), TrkERASE (erase a track), TrkMkERASE
(erase an EDL mark), AllMkERASE (erase all
EDL marks), FORMAT (format the CF card), and
CARD CHECK.
Press and release the F.FWD/+ button
or the
-/F.REV button
to select the track number
you want to erase.
How to renumber tracks
If you have erased tracks from the CF card it is
easier to locate recordings if the tracks are
renumbered.
Example track
34.
While the track to be erased is flashing (3 sec-
onds), press and release the ENTER button
From stop, press and hold the MARK/ EDIT
button for about 2 seconds to enter Edit mode.
.
(Or press and release the STOP button
cancel.)
to
Renumber is flash-
ing in the display.
EXECUTING will be
displayed momen-
tarily.
While Renumber is flashing (3 seconds) press
and release the ENTER button
and release the STOP button
. (Or press
to cancel.)
Done will be dis-
played momentarily.
Renum OK? will
be flashing. Press
and release the
The PMD671 and
the display will
return to the first
ENTER button
to confirm.
EXECUTING will be
displayed, and the
percentage execut-
track so you can choose to erase another track.
ing will increase to 100%.
The recording time (file space on the CF card)
used by the erased track is available for record-
ing.
100% done will be
displayed momen-
tarily. The
PMD671 and the
display will return to stop mode.
Press and release the STOP button
to exit.
How to erase tracks
From stop, press and hold the MARK/ EDIT
button for about 2 seconds to enter Edit mode.
Renumber is flash-
ing in the display.
While Renumber is flashing (3 seconds) press
and release the MARK/ EDIT button again.
- 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
How to erase all EDL marks within one track
How to erase all EDL marks
From stop, press and hold the MARK/ EDIT
button for about 2 seconds to enter Edit mode.
From stop, press and hold the MARK/ EDIT
button for about 2 seconds to enter Edit mode.
Renumber is flash-
ing in the display.
Renumber is flash-
ing in the display.
While the display is flashing (3 seconds) press
and release the MARK/ EDIT button three more
times.
While the display is flashing (3 seconds) press
and release the MARK/ EDIT button two more
times.
AllMkERASE is
flashing in the display.
TrkMkERASE is
flashing in the display.
While AllMkERASE is flashing (3 seconds), press
and release the ENTER button
While TrkMkERASE is flashing (3 seconds) press
and release the ENTER button
.
.
AllMkErOK? is
flashing in the
display.
Track number is
flashing in the
ERASE display
The display asks you to confirm that you want to
erase all EDL Marks on the CF card. While
AllMkErOK? is flashing, press and release the
ENTER button to confirm. (Or press and
release the STOP button to cancel.)
Press and release the F.FWD/+ button
-/F.REV button to select the track that
or the
contains the EDL Marks to erase.
Example to erase all
EDL marks in Track
12.
EXECUTING will be
displayed momen-
tarily.
While the track number is flashing, press and
release the ENTER button
release the STOP button
Done will be dis-
played momentarily.
. (Or press and
to cancel.)
EXECUTING
will be displayed
momentarily.
The PMD671 and the display will return to stop
mode.
How to format a CF card
Done will be
displayed mo-
mentarily.
From stop, press and hold the MARK/ EDIT
button for about 2 seconds to enter Edit mode.
The PMD671 and the display will return to the
Renumber is flash-
ing in the display.
first track, so you
can choose an-
other track to
erase its EDL
marks.
While the display is flashing (3 seconds) press
and release the MARK/ EDIT button four more
times.
Press and release the STOP button
to exit.
- 21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
How to check a CF card (CARD CHECK)
FORMAT is flash-
ing in the display.
Although rare, manufacturing defects in CF cards
occasionally prevent a CF card from being able
to read and write at the speeds required by the
PMD671. CARD CHECK does a sample read/
write to check if a CF card has problems. If a
CARD CHECK fails, you can usually return the
CF card for a replacement.
While FORMAT is flashing (3 seconds), press and
release the ENTER button
.
FORMAT OK? is
flashing in the
display.
From stop, press and hold the MARK/ EDIT
button for about 2 seconds to enter Edit mode.
The display asks you to confirm that you want to
format the CF card. Formatting the CF card will
erase all recordings on the card.
Renumber is flash-
ing in the display.
While FORMAT OK? is flashing, press and
release the ENTER button
to confirm. (Or
While the display is flashing (3 seconds) press
and release the MARK/ EDIT button five more
times.
press and release the STOP button
to cancel.)
EXECUTING will be
displayed momen-
tarily.
CARD CHECK is
flashing in the
display.
Done will be dis-
played momentarily.
While CARD CHECK is flashing (3 seconds)
press and release the ENTER button
.
The PMD671 returns to stop mode.
EXECUTING will
be displayed and
the percentage will
go to 100%.
L
-dB
R
00
40
20
12
6
2
0
over
BlankCard will be
displayed.
-dB
LINE
The CF card formats used by the PMD671 are
Windows compatible. You can copy audio files
Read: and Write:
numbers will be
using a Windows compatible computer* that can
read a CF card or be connected via the USB port.
displayed. If the
Example display
read and write
numbers are the same, the CF card check is
successful.
*Or a Macintosh computer that can recognize Windows
compatible removable drives.
Note:
CF cards with less than 2 GB capacity are auto-
matically formatted FAT16 (FAT = File Allocation
Table).
The number times 2 equals the actual read and write speed
in kbps. For the example card, the total speed of the
PMD671 and CF card was thus 6646 kbps. To read and
write audio at 24-bit 96 kHz requires at least 4680 kbps.
CF cards with 2 - 8 GB capacity are automatically
formatted FAT32.
The maximum CF card that can be formatted in
the PMD671 is 8 GB. If larger cards are used,
please format in your computer.
- 22 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Connections
Top continued
20. TRACK JUMP forward button
SOLID STATE RECORDER PMD671
During playback, press and release to jump to the
next track. If pressed while playing the last track,
playback jumps to the first track on the CF card.
STEREO
L
0dB
-20dB
SOURCE
FILE
R
MIC ATTEN
FLAT
MONITOR
OFF ON
AUDIO OUT
SINGLE
ALL
OFF
PRE REC
OFF
ON
ANC
LIMITER
MANUAL
OFF
ON
ALC
INPUT LOCK
EDL PLAY
LEVEL CONT.
EDIT
INPUT
A-B REPEAT
MARK
TRACK JUMP
-
/
REW
FWD
/
+
REC
UNDO
MARGIN RESET
PLAY
/
PAUSE
STOP
POWER
F.FWD
/
+
-
/
F.REV
USB MENU/STORE
ENTER
CANCEL
20
21
22
19
-
/
F.REV
F.FWD
/
+
TRACK JUMP
MARGIN RESET
REC
UNDO
21. - /F.REV button
22. F.FWD/+ button
PLAY / PAUSE
STOP
During playback, press and hold the -/F.REV
button to Fast Reverse and, do an audible
search in the reverse direction. Press and hold
the F.FWD/+ button to Fast Forward and, do
ENTER
CANCEL
USB MENU/STORE
TRACK JUMP
19, 20. TRACK
JUMP buttons
a 2X speed audible search in the forward direc-
tion. Release to return to normal forward play-
back.
REC
UNDO
TRACK JUMP reverse button
REC UNDO button
TRACK JUMP forward button
During play pause, press and hold the -/F.REV
button
or the F.FWD/+ button
to Fast
Reverse or Fast Forward quickly. The Fast
Reverse or Fast Forward is at 10X speed for
three seconds, then it automatically speeds up to
140X speed.
19. TRACK JUMP reverse button
During playback, press and release to jump to the
previous track. If pressed while playing the first
track, playback jumps to the last track on the CF
card.
During Editing and Menu functions, press and
release the -/F.REV button
to increment a
parameter in the - direction, and press and
19. REC UNDO button
release the F.FWD/+ button
parameter in the + direction.
to increment a
During recording, press and release twice to undo
(erase) the recording and pause recording at the
beginning of the track.
Notes:
•
TRACK TIME
L
-dB
R
Example display
during record.
If the -/F.REV button or the F.FWD/+ button
held past the beginning or end of a track, the Fast
is
00
40
20
12
6
2
0
over
-dB
TRACK
LINE
Reverse or Fast Forward will continue onto the previous
or next track.
•
•
If REPEAT SINGLE or REPEAT ALL is on, the Fast
Reverse or Fast Forward will follow the repeat order.
The buttons do not function in EDL playback or EDL A-B
repeat.
Example display for
3 seconds after
REC UNDO button
is pressed.
TRACK TIME
L
00
20
12
0
40
6
2
over
-dB
R
-dB
INT
MIC
TRACK
Example if REC
UNDO button is
pressed again
within the 3 sec-
onds.
TRACK TIME
L
00
20
12
0
40
6
2
over
-dB
R
-dB
INT
MIC
TRACK
Recording is at REC pause at the beginning of
the track.
- 23 -
Download from Www.Somanuals.com. All Manuals Search And Download.
SOLID STATE RECORDER PMD671
Controls and Connections
Top continued
STEREO
0dB
-20dB
SOURCE
FILE
L
R
MONITOR
OFF ON
AUDIO OUT
SINGLE
MIC ATTEN
FLAT
ALL
OFF
SOLID STATE RECORDER PMD671
PRE REC
OFF
ON
ANC
LIMITER
ALC
OFF
ON
MANUAL
d
c
INPUT LOCK
EDL PLAY
LEVEL CONT.
EDIT
INPUT
A-B REPEAT
MARK
TRACK JUMP
-
/
REW
FWD
/
+
REC
UNDO
STEREO
0dB
-20dB
SOURCE
FILE
L
R
MARGIN RESET
PLAY
/
PAUSE
STOP
POWER
MIC ATTEN
FLAT
MONITOR
OFF ON
AUDIO OUT
SINGLE
USB MENU/STORE
ENTER
CANCEL
ALL
OFF
-
/
F.REV
F.FWD
/
+
PRE REC
OFF
ON
ANC
LIMITER
MANUAL
TRACK JUMP
OFF
ON
ALC
INPUT LOCK
EDL PLAY
LEVEL CONT.
EDIT
INPUT
A-B REPEAT
REC
UNDO
MARK
TRACK JUMP
-
/
REW
FWD
/
+
REC
UNDO
MARGIN RESET
PLAY / PAUSE
STOP
MARGIN RESET
PLAY
/
PAUSE
STOP
POWER
USB MENU/STORE
ENTER
CANCEL
ENTER
CANCEL
USB MENU/STORE
-
/
F.REV
F.FWD
/
+
TRACK JUMP
MARGIN RESET
REC
UNDO
a
b
PLAY / PAUSE
STOP
Press and release during menu operations to
store the changed values.
23
ENTER
CANCEL
USB MENU/STORE
Menu operations
23. MARGIN RESET/
USB MENU/STORE
buttons
Several functions depending
on state of the PMD671.
MARGIN RESET
Menu operations let you fine tune how the
PMD671 is set up, including the recording pa-
rameters for your specific recording situation.
USB
MENU/STORE
The PMD671 is always recording using Preset1,
2 or 3. To modify the recording setup, you modify
one of those three presets.
MARGIN RESET button
During record, press and release to reset the
peak level margin.
Example display
TRACK TIME
L
-dB
R
The Menu procedure starts with selecting one of
the Presets, then modifying either the settings
within that Preset, or the General settings for
Date and time, date format, beep and/or battery
type.
00
20
12
0
40
6
2
over
with level margin at
OV before pressing
the MARGIN RE-
SET button.
-dB
INT
MIC
TRACK
level margin
The level margin displays the highest level
achieved since the track began, or the MARGIN
RESET button was pressed and released. OV
indicates a margin over 0dB.
Select Preset
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
USB button
Connects the CF card via the USB port to a
connected device (usually a computer).
Press ENTER
Press F.FWD/+
Press ENTER
................................... Preset#
..................................... set #
......save & switch to next item
Press MENU/STORE .....................save & exit
From power off, press and hold the USB button
while you slide the PMD671's POWER switch to
the right.
1. Press and hold the MENU/STORE button
(a) for about 2 seconds. Preset will appear
(flashing) in the display.
This display
appears.
Example
display
The CF card in the PMD671 appears as an
external drive on a connected computer.
2. While Preset is flashing, press and release
the ENTER button
Power off to disconnect.
See page 51, How to connect via the USB port.
(b).
The flashing
switches to the
Preset choice.
MENU/STORE button
Press and hold for about 2 seconds to enter
menu mode.
continues
- 24 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Date Form – For selecting the date order.
3. Press and release the F.FWD/+ button
(c)
or the -/F.REV button
(d) to tab through
Beep – Turn the beep on or off.
Preset1, Preset2 and Preset3.
A.PowOff – Enable or disable the Automatic
Power Off feature.
Example display
4. When the correct choice is displayed, press
and release the ENTER button
select your Preset choice.
Batt type – Set the battery type.
Preset - Choose 1, 2 or 3.
Within Preset choice:
(b) to
The display
switches to
RecFormat flash-
ing for your Preset choice.
RecFormat – For setting or changing the re-
cording compression algorithm, bit rate, sam-
pling frequency, audio file type, and if one or two
input channels are to be recorded.
You can:
•
Press and release the ENTER button
to switch to
editing the Rec Format parameters of your Preset
choice.
RAW Mode - Choose Monitor or TimeShft.
•
•
•
Press and release the
MENU/STORE button to store
your Preset choice and exit Menu mode.
Press and release the CANCEL button
mode without changing your Preset.
Press and release the F.FWD/+ button
Verify - Set the automatic recording verify
feature on or off.
to exit menu
or the -/
F.REV button
to change menu settings that are not
PupPreRec - Set the power up pre record
feature on* or off.
specific to a Preset. (The F.FWD/+ button
to MONITOR Mode, and the -/F.REV button
switches to Default.)
switches
*If PupPreRec is on in the preset menu, AutoTrk will not
work, even if it is set to on.
Menu settings
St Mode - If Stereo is set in RecFormat this sets
how Left and Right input channels are recorded
(Stereo, L-Stereo or 0-20dB).
1. Press and hold the MENU/STORE button
(a) for about 2 seconds. Preset will appear
(flashing) in the display.
Mono Mode - If Mono is set in RecFormat this
sets how the source is recorded onto the MONO
channel (Mono or L/R mix mono).
Example display
Auto Mark - Turn the automatic EDL mark
feature on or off.
2. While Preset is flashing, press and release
the F.FWD/+ button
.
Manual TR – Turn manual track incrementing
feature on or off.
The display
switches to Date/
Time flashing.
Auto TRK - Turn the automatic track
incrementing feature on or off, and if on, set the
time interval.
The Menu choices are:
General settings
(common to Presets 1, 2 and 3)
SeamlsPly – Turn the Seamless play feature on
or off.
Date/Time – For setting or changing the Date
and Time associated with when an audio
track (file) was created.
SilentSkp – Turn Silent Skip feature ON, Off or
ON with new track, set the number of seconds
the dB level must meet or exceed the set thresh-
old, and set the dB threshold level.
continues
- 25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Cue – Turn the Auto Cue feature on or off,
set the number of milliseconds the dB level must
meet or exceed the set threshold, and set the dB
threshold level.
1. From stop, press and hold the MENU/
STORE button for about 2 seconds. Preset
will appear (flashing) in the display.
Example
display
S.Monitor - Turn the Stop Monitor feature on or
off.
2. With Preset flashing, press and release the
SinglePly – Turn the single track play feature on
or off.
F.FWD/+ button
.
The Date/Time
Menu choice will
most likely ap-
pear.
Remote – Set the effect of the optional wired
remote contact closure switch plugged into the
REMOTE 1 jack.
ID1Dscrpt – Set the description ID code for
broadcast wave file recordings.
Note
If another Menu choice appears (Date Form, Beep,
A.PowOff, Batt type) press and release the F.FWD/+ button
repeatedly until Date/Time is displayed.
ID2Origin – Set the origin ID code for broadcast
wave file recordings.
3. Press and release the ENTER button
The current date
.
ID3OrgRef – Set the origin reference ID code for
broadcast wave file recordings.
PM
and time informa-
tion will be
displayed with
the month flashing.
Default – Reset all Menu settings to factory
default settings.
Example display
How to set or change the Date and time
4. With the month flashing press and release the
F.FWD/+ button or the -/F.REV button
The date and time are written on each audio track
(file) when the track is started. When an audio
track is viewed on a computer, this date and time
appears as when the file was 'modified'. (US date
format is illustrated.)
to tab through the months. When the month
is correct, press
and release the
PM
ENTER button
.
Example display
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
The day will be flashing.
Press F.FWD/+
Press ENTER
Press F.FWD/+
Press ENTER
Press F.FWD/+
Press ENTER
Press F.FWD/+
Press ENTER
Press F.FWD/+
Press ENTER
Press F.FWD/+
Press ENTER
............................. Date/Time
..................................... month
repeatedly ..... correct month
......................................... day
repeatedly ......... correct day
........................................ year
repeatedly ........ correct year
........................................ hour
repeatedly ........ correct hour
.................................... minute
repeatedly .... correct minute
...............................Date/Time
5. With the day flashing press and release the
F.FWD/+ button or the -/F.REV button
to tab through days. When the day is correct,
press and release the ENTER button
The year will be flashing.
.
Example
display
PM
6. With the year flashing press and release the
F.FWD/+ button or the -/F.REV button
to tab through years (2005 - 2099). When the
year is correct, press and release the ENTER
Press MENU/STORE .................... store & exit
button
.
- 26 -
Download from Www.Somanuals.com. All Manuals Search And Download.
How to set or change the Date Form
The hour will be flashing.
Example
display.
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
PM
Press F.FWD/+
Press ENTER
Press F.FWD/+
Press ENTER
2X....................... Date Form
...................... M/D/Y or D/M/Y
.................... M/D/Y or D/M/Y
.............................. Date Form
7. With the hour flashing, press and release the
F.FWD/+ button or the -/F.REV button
to tab through hours. AM, PM will change
when you pass 12, check that it is correct.
When the hour and AM/PM is correct, press
Press MENU/STORE .................... store & exit
and release the ENTER button
The minute will be flashing.
.
1. From stop, press and hold the MENU/
STORE button
for about 2
Example
display
PM
seconds.
Preset will appear (flashing) in the display.
8. With the minute flashing, press and release
the F.FWD/+ button or the -/F.REV
button to tab through minutes. When the
minute is correct*, press and release the
2. With Preset flashing, press and release the
F.FWD/+ button
repeatedly
until Date Form
is displayed.
ENTER button
.
Date/Time will
be flashing.
3. Press and release the ENTER button
again. The M/D/
Y choice will
flash.
*To set time correct to the second, set to the next minute and
wait for that minute to begin before pressing the ENTER
button
.
4. Press and release the F.FWD/+ button
the -/F.REV
or
9. Press and release the MENU/STORE
button. If you have made changes to the
button
to
toggle between
M/D/Y and D/M/Y.
date and/or time,
Stored will be
displayed briefly.
5. When the desired form appears, press and
release the ENTER button
The display
returns to Date
.
The display will return to stop mode.
Note:
Form flashing.
The date and time settings will remain for about 5 years if
the AC Adapter is not plugged in and no batteries are
installed.
You can:
•
•
•
Press and release the F.FWD/+ button
F.REV button to tab to another menu choice, or
Press and release the MENU/STORE button to
write the menu changes and return to stop mode, or
Press and release the CANCEL button
menu changes and return to stop mode.
or the -/
Date Form
to cancel all
The Date Form is the date order month/day/year
or day/month/year.
The US default is M/D/Y (month/day/year).
The Europe default is D/M/Y (day/month/year).
- 27 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Beep
5. When the desired state appears press and
release the ENTER button
The display returns to Beep flashing.
When battery charge can provide no more than
1-3 minutes of recording or playback and Beep is
set to On, the CHARGE indicator, REC indicator
and the battery indicator in the display will flash,
and the PMD671 will beep through the head-
phones or speaker.
.
Example
display
You can:
•
•
•
Press and release the F.FWD/+ button
F.REV button to tab to another menu choice, or
Press and release the MENU/STORE button to write
the menu changes and return to stop mode, or
or the -/
If the PMD671 is not operated for 30 minutes
during stop or play pause, power can be auto-
matically shut off to conserve battery life. (See
A.PowOFF.) If A.PowOFF is set to Yes, and Beep
is set to ON, the PMD671 will beep to alert you
that the power is shutting off.
Press and release the CANCEL button
menu changes and return to stop mode.
to cancel all
Automatic Power Off
If the PMD671 is not operated for 30 minutes
during stop or play pause, power is automatically
shut off to conserve battery life when A.PowOff is
set to Yes.
Default is Beep On.
How to set or change the Beep
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
Default is A.PowOFF Yes
Press F.FWD/+
Press ENTER
Press F.FWD/+
Press ENTER
3X................................ Beep
................................ Off or On
.............................. Off or On
....................................... Beep
How to set or change Automatic Power Off
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
Press MENU/STORE .................... store & exit
Press F.FWD/+
Press ENTER
Press F.FWD/+
Press ENTER
4X......................... A.PowOff
................................Yes or No
..............................Yes or No
................................ A.PowOff
1. From stop, press and hold the MENU/
STORE button for about 2 seconds. Preset
will appear (flashing) in the display.
Press MENU/STORE .................... store & exit
Example
display
1. From stop, press and hold the MENU/
STORE button for about 2 seconds. Preset
will appear (flashing) in the display.
2. While Preset is flashing, press and release
the F.FWD/+ button
is displayed.
repeatedly until Beep
Example
display
Example
display
2. While Preset is flashing, press and release
the F.FWD/+ button
repeatedly until
3. Press and release the ENTER button
The On-Off choice will flash.
.
A.PowOff is displayed.
Example
display
Example
display
3. Press and release the ENTER button
The Yes-No choice will flash.
.
4. Press and release the F.FWD/+ button
or
the -/F.REV button
On and Off.
to toggle between
Example
display
Example
display
- 28 -
Download from Www.Somanuals.com. All Manuals Search And Download.
1. From stop, press and hold the MENU/
STORE button for about 2 seconds. Preset
will appear (flashing) in the display.
4. Press and release the F.FWD/+ button
the -/F.REV
or
button
to
toggle between
Yes and No.
Example
display
5. When the desired state appears, press and
release the ENTER button
returns to
A.PowOff
.The display
2. With Preset flashing, press and release the
F.FWD/+ button
repeatedly
flashing.
until Batt type is
displayed.
You can:
•
•
•
Press and release the F.FWD/+ button
F.REV button to tab to another menu choice, or
Press and release the MENU/STORE button to write
the menu changes and return to stop mode, or
or the -/
3. Press and release the MENU button
.
The Batt type
choice will flash.
Press and release the CANCEL button
menu changes and return to stop mode.
to cancel all
4. Press and release the F.FWD+ button
to
Battery Type
tab through the
Battery type
choices.
The PMD671 can operate on 8 standard AA size
Alkaline, Ni-Cd or Ni-MH batteries.
5. With the desired battery type displayed, press
An optional Ni-Cd battery pack (Model RB1100
available from Marantz Professional) will be
charged by the built-in charger when the AC
adaptor is plugged in.
and release the ENTER button
display returns to
Batt type flash-
.The
ing.
An optional Ni-MH battery pack (Model RB1651
available from Marantz Professional) will be
charged by the built-in charger when the AC
adaptor is plugged in.
You can:
•
•
•
Press and release the F.FWD/+ button
F.REV button
Press and release the
the menu changes and return to stop mode, or
Press and release the CANCEL button
menu changes and return to stop mode.
or the -/
to tab to another menu choice, or
MENU/STORE button to write
to cancel all
The Battery Type setting is used for the battery
indicator in the display and "Low Battery" warn-
ing. If the setting does not match installed batter-
ies the PMD671 will not show the appropriate
battery status.
Default is Alkaline.
How to set or change Battery Type
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
Press F.FWD/+
Press ENTER
Press F.FWD/+
Press ENTER
5X.......................... Batt type
............... battery type flashing
........... tab thru battery types
................................. Batt type
Press MENU/STORE .................... store & exit
- 29 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Rec Format
The PMD671 can record from analog or digital
inputs, on one channel (mono) or two (stereo), in
PCM at 24 or 16 bits, and in MP2 or MP3 com-
pression formats.
Fs kHz and
(Bit rate kbps)
Audio
Format
Channel(s)
File ext.
wav/bwf
mpg/bwf
BWF ext.
24 bit
96, 88.2, 48, 44.1
PCM
For given channels and formats the PMD671 can
record at several bit rates and sample frequen-
cies.
48, 44.1, 32, 24, 22.05,
16, 12, 11.025, 8
16 bit
Stereo
48, 44.1, 32
(384, 256, 192, 128, 96, 64)
MP2
48, 44.1, 32
(320, 256, 160, 128, 80, 64)
mp3/bwf
mp3/bwf
The file extension (.wav, .mpg, .mp3) is set by the
file format chosen (PCM, MP2, MP3) except for
BWF files (Broadcast Wave Format). The BWF
file extension can be either .wav, or .bwf.
MP3
24, 22.05, 16
(160, 128, 80, 64, 40, 32)
wav/bwf
96, 88.2, 48, 44.1
24 bit
16 bit
wav/bwf
PCM
48, 44.1, 32, 24, 22.05,
16, 12, 11.025, 8
Mono
As audio quality goes up (more bits, less com-
pression, higher sampling frequency, greater bit
rate), the amount of information recorded in-
creases so the amount of time that can be re-
corded on a CF card of a specific size goes
down. See Recording time chart on page 57.
48, 44.1, 32
(192, 128, 96, 64, 48, 32)
MP2
MP3
mpg/bwf
mp3/bwf
mp3/bwf
48, 44.1, 32
(160, 128, 80, 64, 40, 32)
24, 22.05, 16
(80, 64, 40, 32, 24, 16)
The RecFormat setting procedure is usually
unnecessary for Digital Input. See page 34. The
following applies to inputs from MIC, LINE IN,
and the Internal mic.
The PMD671 has a sizeable range of file format
parameter choices available, but it does not
present you with every possible combination.
Channel(s)
Your decisions about which File Format param-
eters to use will depend on the quality level you
need for the purpose(s) of your recording versus
limitations in recording time.
Choose between Stereo and Mono recording
(two or one channel). For PCM recording, Stereo
is about twice as time intensive as Mono.
Format
Choose between PCM (16 or 24 bit) or a com-
pression format (MP2 or MP3).
Note:
At very high audio quality levels, processor power also
becomes a limitation. The RAW (Read After Write) and Time
Shift features are processor intensive, so in some instances
the MONITOR and Verify features and 24-bit recording
cannot be used simutaneously. See charts on page 14.
Fs (Sampling Frequency)
Choose the Sample Frequency (in kHz).
The File Format chart below follows the PMD671
File Format menu setting procedure as you read
columns from left to right.
Bit rate
You can select a bit rate in kilobits per second
(kbps) for a compression format (MP2 or MP3).
Note
A full size copy of this chart is on page 58.
File ext. (File extension)
In most cases, you have chosen the file exten-
sion by choosing the Format. If you desire a
BWF file choose between .wav and .bwf for the
file extension.
Rec Format Chart
- 30 -
Download from Www.Somanuals.com. All Manuals Search And Download.
How to set or change the Rec Format param-
eters.
3. Press and release the ENTER button
.
kbps
Mono or Stereo
will be flashing.
kHz
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
Note
The circled items in the chart below reflect the settings in the
example.
Double Click ENTER
.................. RecFormat
Press ENTER
Press F.FWD/+
Press ENTER
Press F.FWD/+
...................... Mono or Stereo
.................... Mono or Stereo
................. PCM, MP2 or MP3
............... PCM, MP2 or MP3
Fs kHz and
(Bit rate kbps)
Audio
Format
Channel(s)
File ext.
wav/bwf
mpg/bwf
BWF ext.
24 bit
96, 88.2, 48, 44.1
If MP2 or MP3 ................................................khz
PCM
Press F.FWD/+
Press ENTER
Press F.FWD/+
Press ENTER
Press F.FWD/+
.......................... select khz
.....................................kbps
........................ select kbps
............. select file extension
.......... mp3, mpg, wav, bwf
48, 44.1, 32, 24, 22.05,
16, 12, 11.025, 8
16 bit
Stereo
48, 44.1, 32
(384, 256, 192, 128, 96, 64)
MP2
48, 44.1, 32
(320, 256, 160, 128, 80, 64)
mp3/bwf
mp3/bwf
MP3
24, 22.05, 16
(160, 128, 80, 64, 40, 32)
wav/bwf
If bwf....................................Exten (.bwf, wav)
Press F.FWD/+ .......................... bwf, wav
If PCM ............................................... 24 or 16 bit
96, 88.2, 48, 44.1
24 bit
16 bit
wav/bwf
PCM
48, 44.1, 32, 24, 22.05,
16, 12, 11.025, 8
Press F.FWD/+
Press ENTER
Press F.FWD/+
Press ENTER
Press F.FWD/+
........................ 24 or 16 bit
.......................................khz
.......................... select khz
............. select file extension
............................ wav, bwf
Mono
48, 44.1, 32
(192, 128, 96, 64, 48, 32)
MP2
MP3
mpg/bwf
mp3/bwf
mp3/bwf
48, 44.1, 32
(160, 128, 80, 64, 40, 32)
24, 22.05, 16
(80, 64, 40, 32, 24, 16)
continues
If bwf....................................Exten (.bwf, wav)
Press F.FWD/+
Press ENTER
.......................... bwf, wav
............................. RecFormat
Press MENU/STORE .................... store & exit
1. Press and hold
the MENU/
STORE button.
Preset flashing appears.
2. Double click the
ENTER button
so
RecFormat is
flashing.
Note
If another menu item is flashing, press and release the
F.FWD/+ button
repeatedly until RecFormat is dis-
played and flashing.
- 31 -
Download from Www.Somanuals.com. All Manuals Search And Download.
kbps
4. Press and
release the
F.FWD/+
kHz
Fs kHz and
(Bit rate kbps)
Audio
Format
Channel(s)
File ext.
wav/bwf
mpg/bwf
BWF ext.
24 bit
96, 88.2, 48, 44.1
button
toggle between Mono and Stereo. When
to
PCM
48, 44.1, 32, 24, 22.05,
16, 12, 11.025, 8
16 bit
correct, press and release the ENTER button
. The
Stereo
kbps
48, 44.1, 32
(384, 256, 192, 128, 96, 64)
MP2
kHz
display
48, 44.1, 32
(320, 256, 160, 128, 80, 64)
mp3/bwf
mp3/bwf
switches to
Format flash-
ing.
MP3
24, 22.05, 16
(160, 128, 80, 64, 40, 32)
wav/bwf
96, 88.2, 48, 44.1
24 bit
16 bit
Note
wav/bwf
PCM
In the example, the change from Mono to Stereo automati-
cally doubled the bit rate. The change is illustrated in the
chart below.
48, 44.1, 32, 24, 22.05,
16, 12, 11.025, 8
Mono
48, 44.1, 32
(192, 128, 96, 64, 48, 32)
MP2
MP3
mpg/bwf
mp3/bwf
mp3/bwf
48, 44.1, 32
(160, 128, 80, 64, 40, 32)
Fs kHz and
(Bit rate kbps)
Audio
Format
Channel(s)
File ext.
wav/bwf
mpg/bwf
BWF ext.
24, 22.05, 16
(80, 64, 40, 32, 24, 16)
24 bit
96, 88.2, 48, 44.1
PCM
6. Press and release the F.FWD/+ button
toggle between 16 bit and 24 bit PCM.
When correct,
to
48, 44.1, 32, 24, 22.05,
16, 12, 11.025, 8
16 bit
Stereo
48, 44.1, 32
(384, 256, 192, 128, 96, 64)
MP2
kHz
press and
release the
ENTER button
.
The display
48, 44.1, 32
(320, 256, 160, 128, 80, 64)
mp3/bwf
mp3/bwf
MP3
24, 22.05, 16
(160, 128, 80, 64, 40, 32)
wav/bwf
96, 88.2, 48, 44.1
24 bit
16 bit
kHz
wav/bwf
PCM
48, 44.1, 32, 24, 22.05,
16, 12, 11.025, 8
switches to the
next
Mono
48, 44.1, 32
(192, 128, 96, 64, 48, 32)
RecFormat menu choice flashing.
MP2
MP3
mpg/bwf
mp3/bwf
mp3/bwf
48, 44.1, 32
(160, 128, 80, 64, 40, 32)
Note
The chart below reflects the settings change.
24, 22.05, 16
(80, 64, 40, 32, 24, 16)
5. Press and release the F.FWD/+ button
to
Fs kHz and
(Bit rate kbps)
Audio
Format
Channel(s)
File ext.
wav/bwf
mpg/bwf
BWF ext.
tab through MP3, MP2 and PCM. Note that
other changes
kHz
24 bit
96, 88.2, 48, 44.1
occur when the
format
changes.
PCM
48, 44.1, 32, 24, 22.05,
16, 12, 11.025, 8
16 bit
Stereo
When correct, press and release the ENTER
.
48, 44.1, 32
(384, 256, 192, 128, 96, 64)
MP2
button
48, 44.1, 32
(320, 256, 160, 128, 80, 64)
mp3/bwf
mp3/bwf
The display
switches to the
next
kHz
MP3
24, 22.05, 16
(160, 128, 80, 64, 40, 32)
wav/bwf
96, 88.2, 48, 44.1
24 bit
16 bit
wav/bwf
RecFormat menu choice flashing.
PCM
48, 44.1, 32, 24, 22.05,
16, 12, 11.025, 8
Note
In our example, we chose PCM. The chart below reflects the
settings change.
Mono
48, 44.1, 32
(192, 128, 96, 64, 48, 32)
MP2
MP3
mpg/bwf
mp3/bwf
mp3/bwf
48, 44.1, 32
(160, 128, 80, 64, 40, 32)
24, 22.05, 16
(80, 64, 40, 32, 24, 16)
- 32 -
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Press and release the F.FWD/+ button
tab through the
to
Fs kHz and
(Bit rate kbps)
Audio
Format
Channel(s)
File ext.
wav/bwf
mpg/bwf
BWF ext.
kHz
available bit
rate settings.
When correct,
24 bit
96, 88.2, 48, 44.1
PCM
48, 44.1, 32, 24, 22.05,
16, 12, 11.025, 8
16 bit
press and release the ENTER button
.
Stereo
48, 44.1, 32
(384, 256, 192, 128, 96, 64)
MP2
The display
switches to the
next
48, 44.1, 32
(320, 256, 160, 128, 80, 64)
mp3/bwf
mp3/bwf
MP3
24, 22.05, 16
(160, 128, 80, 64, 40, 32)
wav/bwf
RecFormat
menu choice flashing.
96, 88.2, 48, 44.1
24 bit
16 bit
wav/bwf
PCM
48, 44.1, 32, 24, 22.05,
16, 12, 11.025, 8
Notes
In the example there is no choice of sample frequency so the
next RecFormat choice is displayed.
The chart below reflects the settings change.
Mono
48, 44.1, 32
(192, 128, 96, 64, 48, 32)
MP2
MP3
mpg/bwf
mp3/bwf
mp3/bwf
48, 44.1, 32
(160, 128, 80, 64, 40, 32)
24, 22.05, 16
(80, 64, 40, 32, 24, 16)
Fs kHz and
(Bit rate kbps)
Audio
Format
Channel(s)
File ext.
wav/bwf
mpg/bwf
BWF ext.
9. Press and release the F.FWD/+ button
toggle between
to
24 bit
96, 88.2, 48, 44.1
PCM
48, 44.1, 32, 24, 22.05,
16, 12, 11.025, 8
16 bit
a .wav and a
.bwf file exten-
sion.
Stereo
48, 44.1, 32
(384, 256, 192, 128, 96, 64)
MP2
48, 44.1, 32
(320, 256, 160, 128, 80, 64)
mp3/bwf
mp3/bwf
MP3
When correct, press and release the ENTER
button
24, 22.05, 16
(160, 128, 80, 64, 40, 32)
wav/bwf
.
96, 88.2, 48, 44.1
The display
returns to the
RecFormat
menu choice
flashing.
24 bit
16 bit
wav/bwf
PCM
48, 44.1, 32, 24, 22.05,
16, 12, 11.025, 8
Mono
48, 44.1, 32
(192, 128, 96, 64, 48, 32)
MP2
MP3
mpg/bwf
mp3/bwf
mp3/bwf
48, 44.1, 32
(160, 128, 80, 64, 40, 32)
You can:
24, 22.05, 16
(80, 64, 40, 32, 24, 16)
•
•
•
Press and release the F.FWD/+ button
F.REV button to tab to another menu choice, or
Press and release the MENU/STORE button to write
the menu changes and return to stop mode, or
Press and release the CANCEL button
menu changes and return to stop mode.
or the -/
8. Press and release the F.FWD/+ button
toggle between
a bwf file and
to
to cancel all
the other avail-
able file type.
When correct, press and release the ENTER
button
The display
.
switches to the
next RecFormat
menu choice flashing.
Notes
In the example bwf was chosen so the wav/bwf RecFormat
choice is displayed.
The chart below reflects this settings change.
- 33 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
•
Digi-IN Rec Format
An audio drop out of the monitoring signal may occur
during RAW during high bit rate MP3 recording.
RAW and 24-bit recording requires high CF card access
speed (see CARD CHECK page 22).
RAW is not available for 24-bit recording.
Verify is simultaneously available with RAW or Time
Shift for appropriate files (see charts on page 14).
Most of the RecFormat parameters recorded
from a digital input source are determined by the
input source. They are not changed because of
settings made in the RecFormat menu.
•
•
•
How to set or change the RAW Mode
The shaded areas in the chart below are set by
the input source and ignore RecFormat menu
settings.
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
Double Click ENTER
Press F.FWD/+
.................. RecFormat
Digi-IN RecFormat chart
........................... RAW Mode
Fs kHz and
Audio
Channel(s)
File ext.
BWF ext.
Press ENTER
Press F.FWD/+
Press ENTER
.................... Monitor/TimeShft
....... toggle Monitor/TimeShft
............................. RAW Mode
(Bit rate kbps)
96, 88.2, 44, 44.1
48 , 44.1
Format
24 bit
wav/bwf
PCM
16 bit
Stereo
48, 44.1
(384, 256, 192, 128, 96, 64)
Press MENU/STORE .................... store & exit
MP2
MP3
mpg/bwf
mp3/bwf
48, 44.1
(320, 256, 160, 128, 80, 64)
wav/bwf
1. From stop, press and hold the MENU/
STORE button for about 2 seconds. Preset
will appear (flashing) in the display.
24 bit
16 bit
96, 88.2, 44, 44.1
48 , 44.1
wav/bwf
PCM
Mono
48, 44.1
(192, 128, 96, 64, 48, 32)
MP2
MP3
mpg/bwf
mp3/bwf
Example
display
48, 44.1
(160, 128, 80, 64, 40, 32)
RAW Mode
2. While Preset is flashing, double click the
ENTER button
.
RAW (Read After Write) mode sets the operation
of the MONITOR switch.
Example
display
RAW is an electronic Read After Write. In all
modes except 24 bit recording, the PMD671 can
read a recording on the CF Card while simulta-
neously recording onto the CF Card.
A menu choice will be flashing.
3. Press and
release the
F.FWD/+
When RAW Mode is at Monitor and if the MONI-
TOR switch is at FILE when recording begins, the
monitoring signal sent to the PHONES jack and
LINE OUT jacks is read from the CF card a
maximum of 2 seconds after it is recorded. Thus,
the monitored signal is not the source but is the
recording.
button
until RAW Mode is displayed.
4. With RAW Mode flashing, press and release
the ENTER
button
The RAW
Mode menu choice is flashing.
.
When RAW Mode is at TimeShft and if the MONI-
TOR switch is at FILE when recording begins, the
monitoring signal sent to the PHONES jack and
LINE OUT jacks is the same as the source until a
playback button is activated. (PLAY/PAUSE,
TRACK JUMP, F.FWD or F.REV) The recording
before the playback button was activated, and
previously recorded tracks, can then be moni-
tored and reviewed using normal playback con-
trols while recording continues.
5. Press and release the F.FWD/+ button
to
toggle between
Monitor and
TimeShft.
6. When the desired state is displayed, press
and release the
ENTER button
.
- 34 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press and release
the F.FWD/+
The display returns to RAW Mode flashing.
You can:
button until
Verify is displayed.
•
•
•
Press and release the F.FWD/+ button
F.REV button to tab to another menu choice, or
Press and release the MENU/STORE button to
write the menu changes and return to stop mode, or
or the -/
4. With Verify flash-
ing, press and
release the
Press and release the CANCEL button
menu changes and return to stop mode.
to cancel all
ENTER button
Verify menu choice is flashing.
.
Verify
5. Press and re-
lease the F.FWD/
Verify is an automatic, electronic, Read After
Write check. With Verify On, the PMD671 con-
tinually reads the CF card about one second
after the recording. It compares what is recorded
to the source signal. A mismatch results in an
error message.
+ button
toggle between On and Off.
to
6. When the desired state is displayed, press
and release the
ENTER button
.
Verify does not depend on the position of the
MONITOR switch.
The display returns to Verify flashing.
Verify does not function during MP2 record-
ing.
You can:
•
•
•
Press and release the F.FWD/+ button
F.REV button to tab to another menu choice, or
Press and release the MENU/STORE button to
write the menu changes and return to stop mode, or
or the -/
See charts on page 14.
Press and release the CANCEL button
menu changes and return to stop mode.
to cancel all
How to set or change Verify
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
PupPreRec
Double Click ENTER
Press F.FWD/+
.................. RecFormat
Power Up Pre Record buffers (remembers) audio
during REC PAUSE. When you slide the REC
switch to engage record, CONT? is displayed.
until ............................ Verify
Press ENTER
Press F.FWD/+
Press ENTER
.....................................Off/On
........................ toggle Off/On
...................................... Verify
• Press and release the PLAY button
record the buffered audio and continue
recording.
to
Press MENU/STORE .................... store & exit
• Slide and release the REC switch again to
discard the buffered audio and continue
recording from that point.
1. From stop, press and hold the MENU/
STORE button for about 2 seconds. Preset
will appear (flashing) in the display.
• Press and release the STOP button
to
discard the buffered audio and stop record-
ing.
2. While Preset is
flashing, double
click the EN-
Note:
If there is less than 5 minutes of REC REMAIN time
PupPreRec does not work.
TER button
Example display
.
A menu choice will be flashing.
- 35 -
Download from Www.Somanuals.com. All Manuals Search And Download.
How to set or change PupPreRec
St Mode
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
Stereo Mode determines which input channels
are recorded onto the Left and Right channels.
Double Click ENTER
Press F.FWD/+
.................. RecFormat
until ................... PupPreRec
There are three Stereo Modes:
Press ENTER
Press F.FWD/+
.....................................Off/On
........................ toggle Off/On
Stereo - The Left input channel is recorded onto
the Left channel, and the Right input channel is
recorded onto the Right channel.
L-Stereo - The Left input channel is recorded
onto the Left channel, and onto the Right channel.
0-20dB - For secure recording, the Left channel is
recorded at the normal record level and the Right
channel is reduced by 20dB.
1. From stop, press
and hold the
MENU/STORE
button for about 2
seconds.
Example display
Notes:
•
If the input is set to INT MIC and St Mode is set to 0-
20dB, the St Mode of the recording is automatically
switched to L-Stereo.
If a mono source input (INT MIC or L channel only) the
mono input is also recorded on the R channel reduced
by 20dB.
2. With Preset
flashing in the
display, double
click the ENTER
•
button
.
How to set or change St Mode
3. Press and release
the F.FWD/+
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
button until
PupPreRec is displayed.
Double Click ENTER
Press F.FWD/+
.................. RecFormat
until ........................ St Mode
4. With PupPreRec
flashing, press
and release the
Press ENTER
Press F.FWD/+
Press ENTER
......... Stereo/L-Stereo/0-20dB
..................... tab thru modes
.................................. St Mode
ENTER button
.
PupPreRec menu choice is flashing.
Press MENU/STORE .................... store & exit
5. Press and release
the F.FWD/+
1. From stop, press
and hold the
button
toggle between On and Off.
to
MENU/STORE
button for about 2
seconds.
6. When the desired state is displayed, press
and release the
ENTER button
2. With Preset
flashing in the
display, double click the ENTER button
.
The display returns to PupPreRec flashing.
.
You can:
3. Press and release the F.FWD/+ button
until St Mode is
displayed.
•
•
•
Press and release the F.FWD/+ button
F.REV button to tab to another menu choice, or
Press and release the MENU/STORE button to write
the menu changes and return to stop mode, or
Press and release the CANCEL button
menu changes and return to stop mode.
or the -/
to cancel all
4. With St Mode
flashing, press
and release the
ENTER button
St Mode menu choice is flashing.
.
- 36 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press and release the F.FWD/+ button
until Mono Mode
is displayed.
5. Press and release
the F.FWD/+
button to tab
through Stereo, L-Stereo and 0-20db.
4. With Mono Mode
flashing Press
and release the
6. When the desired
mode is displayed,
press and release
ENTER button
Mono Mode menu choice flashing.
.
the ENTER button
The display returns to St Mode flashing.
.
5. Press and release
the F.FWD/+
You can:
•
•
•
Press and release the F.FWD/+ button
F.REV button to tab to another menu choice, or
Press and release the MENU/STORE button to write
the menu changes and return to stop mode, or
Press and release the CANCEL button
menu changes and return to stop mode.
or the -/
button
to
toggle between Mono and LRMono.
to cancel all
6. When the desired
mode is dis-
played, press and
Mono Mode
release the ENTER button .
The display returns to Mono Mode flashing.
Mono Mode determines which input channel(s)
are recorded as the mono channel.
You can:
•
•
•
Press and release the F.FWD/+ button
F.REV button to tab to another menu choice, or
Press and release the MENU/STORE button to write
the menu changes and return to stop mode, or
or the -/
There are two Mono Modes:
Mono - The Left input channel is recorded as the
mono channel.
LR Mono - The Left input channel and the Right
input channel are mixed (combined) and recorded
[(L+R)/2] as the mono channel.
Press and release the CANCEL button
menu changes and return to stop mode.
to cancel all
Auto Mark
How to set or change Mono Mode
Auto Mark turns the automatic EDL mark feature
on or off.
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
On - During record after a REC PAUSE, an EDL
mark is added to the track.
Double Click ENTER
Press F.FWD/+
.................. RecFormat
As recording is resumed and the EDL mark is
added, the following appear for a few seconds.
until .................. Mono Mode
Press ENTER
Press F.FWD/+
Press ENTER
........................Mono/LRmono
..................... tab thru modes
............................ Mono Mode
TRACK TIME
L
00
40
20
12
6
2
0
over
-dB
R
Example
display
-dB
MARK
Press MENU/STORE .................... store & exit
a
b
c
1. From stop, press
and hold the
MENU/STORE
MARK (a) is displayed to indicate that the number
(b) is the EDL mark number. "In Total" (c) reminds
you that EDL marks are counted from the begin-
ning of the CF card, not the beginning of the
current track.
button for about 2 seconds.
2. With Preset
flashing in the
display double
Off - Pause during record does not add an EDL
mark to the track.
click the ENTER button
.
- 37 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual TR
How to set or change Auto Mark
When Manual track incrementing is on, slide and
release the REC switch during recording to
increment the track. A new track is created at that
point. There is no break in recording. When
Manual track incrementing is off, sliding and
releasing REC switch during recording does
nothing.
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
Double Click ENTER
Press F.FWD/+
.................. RecFormat
until ..................... Auto Mark
Press ENTER
Press F.FWD/+
Press ENTER
.....................................Off/On
........................ toggle Off/On
............................... Auto Mark
Press MENU/STORE .................... store & exit
Default setting is On.
How to set or change Manual TR
1. From stop, press
and hold the
MENU/STORE
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
button for about 2 seconds.
Double Click ENTER
Press F.FWD/+
.................. RecFormat
until ....................Manual TR
2. With Preset
flashing in the
display double
Press ENTER
Press F.FWD/+
Press ENTER
.....................................Off/On
........................ toggle Off/On
..............................Manual TR
click the ENTER button
.
Press MENU/STORE .................... store & exit
3. Press and re-
lease the F.FWD/
1. From stop, press
and hold the
MENU/STORE
+ button until
Auto Mark is displayed.
4. With Auto Mark
flashing. press
and release the
ENTER button
.
button for about 2 seconds.
2. With Preset
flashing in the
display, double
click the ENTER button
.
Auto Mark menu choice is flashing.
3. Press and release the F.FWD/+ button
until Manual TR is
displayed.
5. Press and re-
lease the F.FWD/
+ button
to
toggle between
On and Off.
4. With Manual TR
flashing, press
and release the
6. When correct,
press and re-
lease the ENTER
ENTER button
. Manual TR menu choice is flashing.
button .
The display returns to Auto Mark flashing.
5. Press and release
the F.FWD/+
button
toggle between On and Off.
to
You can:
•
•
•
Press and release the F.FWD/+ button
F.REV button to tab to another menu choice, or
Press and release the MENU/STORE button to
write the menu changes and return to stop mode, or
Press and release the CANCEL button
menu changes and return to stop mode.
or the -/
6. When correct,
press and release
the ENTER button
to cancel all
.
The display returns to Manual TR flashing.
- 38 -
Download from Www.Somanuals.com. All Manuals Search And Download.
You can:
1. From stop, press
and hold the
MENU/STORE
•
•
•
Press and release the F.FWD/+ button
F.REV button
Press and release the
the menu changes and return to stop mode, or
Press and release the CANCEL button
menu changes and return to stop mode.
or the -/
to tab to another menu choice, or
MENU/STORE button to write
button for about 2 seconds.
to cancel all
2. With Preset
flashing in the
display, double
Auto TRK
During recording, Auto Track Incrementing breaks
the recording into multiple tracks of a preset
length of time. At the preset time, the next track
number is begun without stopping recording.
click the ENTER button
.
3. Press and release the F.FWD/+ button
until Auto TRK is
displayed.
Timed tracks are helpful when recording long
sessions such as meetings, speeches, surveil-
lance sessions, or recordings for transcription.
During playback, timed tracks make finding a
particular passage easy because of the relation-
ship between track numbers and time.
4. With Auto TRK
flashing, press
and release the
ENTER button
On/Off menu choice is flashing.
.
Auto Track Incrementing can be On or Off. If On,
the time interval can be set to: 1, 5, 10, 15 or 30
minutes; or 1, 2, 6, 8, 12 or 24 hours.
5. Press and
release the
F.FWD/+ button
For example, if Minute Track is recorded (a new
track every minute) you can select track 3 to play
approximately the 3rd minute of recording. To go
directly to the beginning of the 10th minute, select
track 10, etc.
to toggle between On and Off.
6. When correct,
press and
release the
ENTER button
ing.
. Duration choice is flash-
The table below shows the relationship between
time and tracks in Minute Track.
Track
#
Recording time
minutes:seconds
7. Press and release the F.FWD/+ button
to
tab through the
duration
choices.
1 ............................... 0:00 - 0:59
2 ................................ 1:00-1:59
3 ................................ 2:00-2:59
.
.
.
.
8. When correct,
press and
80 ............................. 79:00-79:56
.
.
release the
ENTER button
How to set or change Auto TRK
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
.
The display returns to Auto TRK flashing.
Double Click ENTER
Press F.FWD/+
.................. RecFormat
You can:
until ......................Auto TRK
•
•
•
Press and release the F.FWD/+ button
F.REV button
Press and release the
the menu changes and return to stop mode, or
Press and release the CANCEL button
menu changes and return to stop mode.
or the -/
to tab to another menu choice, or
Press ENTER
Press F.FWD/+
Press ENTER
Press F.FWD/+
Press ENTER
.....................................Off/On
........................ toggle Off/On
.................................. duration
.......................... tab duration
................................Auto TRK
MENU/STORE button to write
to cancel all
Press MENU/STORE .................... store & exit
- 39 -
Download from Www.Somanuals.com. All Manuals Search And Download.
You can:
Seamless Play.
•
•
•
Press and release the F.FWD/+ button
F.REV button
Press and release the MENU/STORE button to write
the menu changes and return to stop mode, or
Press and release the CANCEL button
menu changes and return to stop mode.
or the -/
to tab to another menu choice, or
When Seamless Play is On during playback,
multiple tracks will be played back in sequence
without any break (space) between the tracks.
When Seamless Play is Off during playback,
multiple tracks will be played back in sequence
with breaks (brief periods of silence) between the
tracks.
to cancel all
Silent Skip.
When set to On, Silent skip automatically pauses
recording when there is a period of silence and
continues recording when sound resumes. Silent
Skip looks for sound below a preset level for a
preset period of time. When that occurs, the
PMD671 switches to record pause. When a
signal exceeding the dB level you set is input,
recording resumes. If set to TR, a new track is
started when recording resumes.
Default setting is Off.
How to set or change SeamlsPly
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
Double Click ENTER
Press F.FWD/+
.................. RecFormat
until .................... SeamlsPly
You can set the preset time for 01, 02, 03, 04 or
05 seconds.
Press ENTER
Press F.FWD/+
Press ENTER
.....................................Off/On
........................ toggle Off/On
.............................. SeamlsPly
You can set the decibel level (dB) to- 20, -25, -30,
-35, -40, -45, -50, -55 or -60 dB.
Press MENU/STORE .................... store & exit
For example, if you are both the recorder and
master of ceremonies for an event, you can
preset the PMD671 for recording and automati-
cally start recording when you start speaking into
the microphone.
1. From stop, press and hold the MENU/
STORE button
for about 2
seconds.
2. With Preset flashing in the display, double
click the ENTER
When the Auto Mark feature is at On, resumption
of recording after a record pause by Silent Skip
adds an EDL mark.
button
.
S.SKIP
TRACK TIME
The S.SKIP icon
L
3. Press and release the F.FWD/+ button
until SeamlsPly
is displayed.
00
20
12
0
over
40
6
2
-dB
R
appears in the
display while Silent
Skip is On.
S.SKIP
-dB
TRACK
TRACK TIME
L
-dB
00
20
12
0
40
6
2
over
4. With SeamlsPly
flashing, press
and release the
ENTER button
On/Off menu choice is flashing.
5. Press and
The S.SKIP icon is
flashing during a
R
S.SKIP
-dB
INT
MIC
TRACK
Silent Skip record pause.
.
TRACK TIME
L
-dB
R
Manual overrides:
Pause During
recording press and
00
40
20
12
6
2
0
over
-dB
S.SKIP
INT
MIC
TRACK
release the
F.FWD/+ button
release the REC PAUSE button to force a record-
ing pause. S.SKIP icon is steady. Slide the REC
Button to resume recording.
to toggle between On and Off
6. When correct,
press and
release the
Resume During Silent Skip pause, slide the REC
Button to resume recording. Silent Skip remains
active.
ENTER button
.
The display returns to SeamlsPly flashing.
- 40 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
If you don't want to change the seconds or dB settings press
How to set or change SilentSkp continued
Default settings are Off, 03 seconds and -40 dB.
How to set or change SilentSkp
and release the ENTER button
SilentSkp flashing.
several times to tab to
7. Press and re-
lease the F.FWD/
-dB
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
+ button
tab through seconds.
to
Double Click ENTER
Press F.FWD/+
.................. RecFormat
until ...................... SilentSkp
8. When correct, press and release the ENTER
button
Press ENTER
Press F.FWD/+
Press ENTER
Press F.FWD/+
Press ENTER
Press F.FWD/+
Press ENTER
............................... Off/On/TR
....................... tab Off/On/TR
.................................. seconds
.......................... tab seconds
.................................. decibels
.......................... tab decibels
................................ SilentSkp
.
-dB
Decibel choice
flashing.
9. Press and re-
lease the F.FWD/
-dB
+ button
tab through decibel choices.
to
Press MENU/STORE .................... store & exit
10. When correct, press and release the ENTER
button
The display
returns to
SilentSkp flashing.
.
1. From stop, press
and hold the
MENU/STORE
-dB
button for about 2 seconds.
You can:
•
•
•
Press and release the F.FWD/+ button
F.REV button to tab to another menu choice, or
Press and release the MENU/STORE button to
write the menu changes and return to stop mode, or
or the -/
2. With Preset
flashing in the
display, double
Press and release the CANCEL button
menu changes and return to stop mode.
to cancel all
click the ENTER button
.
3. Press and release the F.FWD/+ button
until SilentSkp is
displayed.
Auto Cue
Auto Cue skips the silence at the beginning of an
audio track and pauses playback at the point
where the audio begins (sound is loud enough for
long enough). You can adjust how loud (dB's) and
how long (milliseconds) the audio has to be
before playback is cued.
-dB
4. With SilentSkp
flashing, press
and release the
-dB
ENTER button .
On/Off/TR menu choice is flashing.
If Single Play is selected, Auto Cue pauses
playback and cues to the sound of the next track
when the end of the track is reached.
5. Press and re-
lease the F.FWD/
-dB
The Auto Cue Menu settings permit:
• turning Auto Cue On or Off.
+ button
tab between On, Off and TR.
to
• adjusting the millisecond period in 5 millisec-
ond intervals from 5 to 95 milliseconds.
• adjusting the margin sound level that defines
where audio begins in -5 dB increments from
-20 to -60 dB.
6. When correct,
press and
release the
-dB
ENTER button
ing.
. Seconds choice is flash-
Default settings are Off, 20 milliseconds, and -40
dB.
- 41 -
Download from Www.Somanuals.com. All Manuals Search And Download.
How to set or change Auto Cue
7. Press and
release the
F.FWD/+ button
-dB
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
to tab
through milliseconds.
Double Click ENTER
Press F.FWD/+
.................. RecFormat
until ...................... Auto Cue
8. When correct, press and release the ENTER
Press ENTER
Press F.FWD/+
Press ENTER
Press F.FWD/+
Press ENTER
Press F.FWD/+
Press ENTER
.....................................Off/On
........................ toggle Off/On
............................milliseconds
....................tab milliseconds
.................................. decibels
.......................... tab decibels
................................ Auto Cue
button
.
-dB
Decibel choice
flashing.
9. Press and
release the
F.FWD/+ button
-dB
to tab through decibel choices.
Press MENU/STORE .................... store & exit
1. From stop, press
and hold the
MENU/
10. When correct,
press and re-
lease the EN-
TER button
-dB
STORE button for about 2 seconds.
.
The display returns to Auto Cue flashing.
2. With Preset
flashing in the
display, double
You can:
•
•
•
Press and release the F.FWD/+ button
F.REV button
Press and release the
or the -/
to tab to another menu choice, or
click the ENTER button
.
MENU/STORE button to write
the menu changes and return to stop mode, or
Press and release the CANCEL button
menu changes and return to stop mode.
to cancel all
3. Press and release the F.FWD/+ button
until Auto Cue is
displayed.
-dB
S.Monitor
Stop Monitor lets you monitor the source signal
when in stop as well as during record. The
source signal is available at the PHONES jack
or Internal Speaker.
4. With Auto Cue
flashing, press
and release the
-dB
ENTER button
On/Off menu choice is flashing.
.
Default setting is Off.
5. Press and re-
lease the F.FWD/
-dB
How to set or change S.Monitor
+ button
toggle between On and Off.
to
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
6. When correct,
press and
release the
Double Click ENTER
Press F.FWD/+
.................. RecFormat
-dB
until ...................... S.Monitor
Press ENTER
Press F.FWD/+
Press ENTER
.....................................Off/On
........................ toggle Off/On
................................ S.Monitor
ENTER button
. Milliseconds choice flashing.
Note
If you don't want to change the Milliseconds or dB settings
Press MENU/STORE .................... store & exit
press and release the ENTER button
tab to Auto Cue flashing.
several times to
1. From stop, press and hold the MENU/
STORE button
for about 2
seconds.
- 42 -
Download from Www.Somanuals.com. All Manuals Search And Download.
2. With Preset
flashing, in the
How to set or change SinglePly
display, double
click the ENTER button
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
.
Double Click ENTER
Press F.FWD/+
.................. RecFormat
3. Press and release the F.FWD/+ button
until S.Monitor is
displayed.
until ...................... SinglePly
Press ENTER
Press F.FWD/+
Press ENTER
.....................................Off/On
........................ toggle Off/On
................................ SinglePly
4. With S.Monitor
flashing, press
and release the
Press MENU/STORE .................... store & exit
1. From stop,
ENTER button
On/Off menu choice is flashing.
.
press and hold
the MENU/
STORE button for about 2 seconds.
5. Press and re-
lease the F.FWD/
+ button
to
2. With Preset
flashing in the
display, double
toggle between On and Off.
click the ENTER button
.
6. When correct,
press and
release the
3. Press and
release the
F.FWD/+ button
ENTER button .
The display returns to S.Monitor flashing.
until SinglePly is displayed.
You can:
4. With SinglePly
•
•
•
Press and release the F.FWD/+ button
F.REV button to tab to another menu choice, or
Press and release the MENU/STORE button to
write the menu changes and return to stop mode, or
Press and release the CANCEL button
menu changes and return to stop mode.
or the -/
flashing, press
and release the
ENTER button
.
to cancel all
On/Off menu choice flashing.
5. Press and
release the
F.FWD/+ button
SinglePly
Off - During playback, when Single Play and
Auto Cue are Off and the end of a track is
reached, the next track automatically starts
playing.
to toggle
between On and Off.
6. When correct, press and release the ENTER
On - During playback, when Single Play is On
and the end of a track is reached, the PMD671
automatically pauses. If Auto Cue is also On in
play cues to start of audio.
button
The display
returns to
SinglePly flashing.
.
You can:
Default setting is Off.
•
•
•
Press and release the F.FWD/+ button
F.REV button to tab to another menu choice, or
Press and release the MENU/STORE button to write
the menu changes and return to stop mode, or
or the -/
Press and release the CANCEL button
menu changes and return to stop mode.
to cancel all
- 43 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Mode (REMOTE1 jack only)
Use a wired remote (not supplied) to control the
PMD671. There are five remote modes:
• StartPause – during recording or playback,
switch off to pause and on to resume (record-
ing on the same track).
3. Press and release the ENTER button
accept the
Remote choice
to
and switch to
RemoteMode choices.
• StrtStp TR - during recording, switch off to
pause recording and on to start recording a
new track.
• EDL Mark – during recording, switch remote
to on to add an EDL mark.
• PWR REC – during power off, switch remote
on to turn power on and begin recording.
During recording, switch remote off to stop
recording and power off.
• Manual TRK – during recording, switch
remote on to increment the track. Recording
continues with a new track created at that
point.
4. Press and release the F.FWD/+ button
the -/F.REV
or
button
to tab
through the
RemoteMode choices: StartPause, StartStp
TR, EDL Mark, PWR REC, or Manual TRK.
5. When correct,
press and release
the ENTER
button
to switch to RemoteMode flashing.
You can:
•
•
•
Press and release the F.FWD/+ button
F.REV button to tab to another menu choice, or
Press and release the MENU/STORE button to write
the menu changes and return to stop mode, or
or the -/
Default is StartPause.
How to set or change the Remote Mode
Press and release the CANCEL button
menu changes and return to stop mode.
to cancel all
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
Broadcast Wave ID numbers
Broadcast Wave Format (.bwf) has three identifi-
cation numbers in the header (Extension Chunk):
Description, Originator, and Originator Reference.
For example, if the IDs are used for a broadcast
station ID1 could be the identifier of the station,
ID2 could be used for the department code, and
ID3 for the badge number of the reporter.
Double Click ENTER
Press F.FWD/+
.................. RecFormat
until .........................Remote
Press ENTER ...........StartPause/StrtStp TR/
............... EDL Mark/PWR REC/Manual TRK
Press F.FWD/+
Press ENTER
............... tab Remote Modes
...................................Remote
Press MENU/STORE .................... store & exit
Default is all ID numbers at 000000.
1. Select the RemoteMode menu choice:
How to set or change ID numbers
a. From stop, press and hold the MENU
button for about 2 seconds. Preset will appear
(flashing) in the
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
display.
Double Click ENTER
Press F.FWD/+
.................. RecFormat
b. While Preset is flashing, double click the
until ..................... ID1Dscrpt
ENTER button
The last Menu
choice selected
will appear.
.
.................................ID2Origin or ID3OrgRef
Press ENTER
..................... 1st digit flashing
.............................. tab 0-9
................. save & next digit
a Press F.FWD/+
b Press ENTER
2. Press and release the F.FWD/+ button
Repeat a, b until ................................ 6th digit set
Press ENTER ............................... ID1Dscrpt
repeatedly until
Remote is dis-
played and
.................................ID2Origin or ID3OrgRef
Press MENU/STORE .................... store & exit
flashing.
- 44 -
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Select the ID1 menu choice:
Repeat steps 5 and 6 until all six digits are
set.
a. From stop, press
and hold the
MENU button
7. Press and release the ENTER button
switch to ID#
flashing.
to
for about 2 seconds. Preset will appear (flash-
ing) in the display.
b. While Preset is flashing, double click the
8. Press and release the F.FWD/+ button
switch to the next ID#.
to
ENTER button
The last Menu
choice selected
will appear.
.
9. Repeat 5 - 8 for all three ID numbers.
10. When the upper display is flashing, press
2. Press and release the F.FWD/+ button
repeatedly until an
ID choice is
and release the F.FWD/+ button
to
switch to another menu choice, or press and
release the MENU/STORE button to write
the menu change(s) and return to stop mode.
displayed and
flashing.
Menu Default
3. Press and release the F.FWD/+ button
the -/F.REV
or
The Default menu choice resets all Menu items to
their defaults. This is convenient if you are setting
up a new configuration because you don't have to
check all the settings, you know they are at the
default.
button
tab through the
ID choices.
to
When correct press and release the ENTER
button to
accept the ID#
choice and
switch to the highest number position.
Defaults are listed for each menu item.
Note:
US defaults are used for illustration. See page 59 for a table
of menu defaults.
4. Press and release the F.FWD/+ button
the -/F.REV
or
Quick instructions
Press & hold MENU/STORE 2 sec ....... Preset
button
to tab
Double Click ENTER
Press F.FWD/+
.................. RecFormat
through the digits
0 through 9.
until .......................... Default
Press ENTER
Press ENTER
.................................. Execute
.......................... EXECUTING
............................................................... exits
5. When correct, press and release the ENTER
button to
switch to the
next digit.
1. From stop, press and hold the MENU/
STORE button for
about 2 seconds.
Preset is flashing.
6. Press and release the F.FWD/+ button
the -/F.REV
or
2. With Preset flashing in the display, double
click the ENTER
button
to
tab through the
digits 0 through
9.
button . Menu
item is flashing.
- 45 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Connections
Top continued
3. Press and release the F.FWD/+ button
until Default is
displayed.
SOLID STATE RECORDER PMD671
STEREO
0dB
-20dB
SOURCE
FILE
L
R
MIC ATTEN
FLAT
MONITOR
OFF ON
AUDIO OUT
SINGLE
ALL
OFF
PRE REC
OFF
ON
ANC
LIMITER
MANUAL
OFF
ON
ALC
INPUT LOCK
EDL PLAY
LEVEL CONT.
EDIT
4. With Default flashing, press and release the
INPUT
A-B REPEAT
MARK
TRACK JUMP
-
/
REW
FWD
/
+
REC
UNDO
MARGIN RESET
PLAY
/
PAUSE
STOP
POWER
USB MENU/STORE
ENTER
CANCEL
ENTER button
. Execute
will be flashing*.
-
/
F.REV
F.FWD
/
+
TRACK JUMP
MARGIN RESET
5. Press and release the ENTER button
EXECUTING is
displayed briefly.
.
REC
UNDO
PLAY / PAUSE
STOP
ENTER
CANCEL
USB MENU/STORE
The PMD671 returns to stop mode.
24
25
*Press and release the STOP button
changing your Menu settings.
to exit without
PLAY / PAUSE
24. PLAY/PAUSE but-
ton (playback)
ENTER button
(menu)
ENTER
PLAY/PAUSE button
From stop, press and release to begin playback.
During playback, press and release to pause
playback.
During playback pause, press and release to
resume playback.
PLAY / PAUSE
ENTER button
During menu functions, press
and release to accept the
current setting and switch to
ENTER
the next menu item to be set.
STOP
25. STOP/CANCEL button
During recording, press and
release to stop recording and
end the track (file).
CANCEL
During playback, press and release to stop
playback and end the playback session. When
you resume, playback starts at the beginning of
the first track.
During menu operations, press and release to
cancel all entries made and return to stop mode.
- 46 -
Download from Www.Somanuals.com. All Manuals Search And Download.
A REC PAUSE does not increment the track.
Front
If the AUTO MARK switch is at ON, after a REC
PAUSE an EDL mark is added when recording is
resumed. The following is displayed for a couple
of seconds.
1
2
3 4
5
6
REC PAUSE
REC
L
HP/SPK VOLUME
PHONES
R
REC
LEVEL
DISPLAY
LIGHT
KEY LOCK
TRACK TIME
L
-dB
R
00
20
12
0
over
40
6
2
-dB
MARK
1. HP/SPK VOLUME control
Turn to adjust the volume of
headphones plugged into the
PHONE jack or the built-in
speaker.
d
e
f
HP/SPK VOLUME
MARK (d) is displayed to indicate that the num-
ber (e) indicates the count of EDL marks.
"inTotal" (f) reminds you that EDL marks are
counted from the beginning the Flash memory
card, not the beginning of the current track.
During playback, what is heard on the L or R
headphone depends on the recording. For a
Stereo or Dual Mono recording, the setting of the
AUDIO switch determines what is heard on
headphones.
4. REC indicator
Red indicator light is lit
and steady during
REC
TOTALTRACKTIME
REC REMAIN kbps
A-B
2. Display
See Display on
L
-dB
R
00
20
12
0
over
40
6
2
kHz
AM
PM
S.SKIP
-dB
INT
MIC
LINE
TRACK
MARK
Record and flashing during Record pause.
page 55 for
details.
REC
5. REC switch
From Stop, slide to the
right and release to start
recording.
REC PAUSE
3. REC PAUSE button
During recording, push and
release to pause.
From REC PAUSE, slide to the right and release
to resume recording.
If Manual TR is on during recording, slide to the
right and release to increment the track (start a
new audio file).
When paused, the REC indicator will flash.
TRACK TIME
L
00
20
12
0
40
6
2
over
-dB
R
Example
display
-dB
INT
MIC
TRACK
To stop recording, press and release STOP
.
b
a
c
6. REC LEVEL controls
Turn to adjust the
The Pause symbol (a) will be displayed.
The Record symbol (b) will flash in the display
L
record level when the
LEVEL CONT. switch
is at MANUAL.
R
The Level meter (c) will remain active.
REC
LEVEL
To resume recording, slide the REC switch to the
right and release.
The inside control (Right channel) and outside
control (Left channel) turn together unless you
hold one while turning the other.
The optimum record level is when the level meter
goes as close to 0dB as possible but not OVER.
- 47 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Front continued
sampling frequency
bit rate
After the third
press, file
parameters are
displayed.
L
-dB
R
kbps
00
20
12
0
REC PAUSE
DISPLAY
40
6
2
over
REC
kHz
L
-dB
HP/SPK VOLUME
PHONES
R
REC
LEVEL
LIGHT
KEY LOCK
compression
algorithm
recording type
7
8
9
PHONES
7. PHONES jack
Plug stereo head-
phones in this jack.
Current clock time
hours:minutes:seconds
After the fourth
press, Date and
Time informa-
tion is dis-
TIME
L
-dB
R
00
40
20
12
6
2
0
over
PM
-dB
Adjust headphone volume with the HP/SPK
volume control.
played.
After the fifth press, the display returns to the
default: remaining record time on the card.
Headphones are active during recording and
playback.
Record time on track
During playback, plugging in headphones mutes
the internal speaker.
During Record:
the default display
TRACK TIME
L
-dB
R
00
40
20
12
6
2
0
over
-dB
is Record time on
the current track.
TRACK
LINE
DISPLAY
8. DISPLAY button
Press and release to tab
through alternate infor-
mation displays.
The first press of the DISPLAY button switches
to remaining record time for the card.
The second press switches to file parameters.
The third press switches to date and time.
The fourth press returns to the default.
Displays are slightly different in Stop, Record and
Play.
remaining record time on card
During Stop:
TIME
L
-dB
R
REC REMAIN
Default display is
Remaining
00
40
20
12
6
2
0
over
-dB
MIC
playing time
During Playback:
the default display
record time for
the card.
Example display.
TRACK TIME
L
-dB
00
20
12
0
over
40
6
2
R
is playing time on
the current track.
-dB
TRACK
After the first press,
track information
is displayed.
L
00
20
12
0
over
40
6
2
-dB
R
The first press switches to file parameters.
-dB
TRACK
MIC
The second press switches to date and time.
The third press returns to the default.
Total tracks on CF card.
After the second
press, EDL mark
information is
displayed.
LIGHT
9. LIGHT button
L
-dB
R
00
40
20
12
6
2
0
over
Press and release to
momentarily turn the Dis-
play light on.
-dB
MARK
Total EDL marks on CF card.
Press and hold for three seconds to switch the
Display light on.
Press and release to switch the Display light
off.
- 48 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Door Open is
displayed.
Front continued
REC PAUSE
DISPLAY
REC
L
HP/SPK VOLUME
PHONES
R
The PMD671 automatically turns off.
REC
LEVEL
LIGHT
KEY LOCK
10
CF card slot
CF card door
Card eject
button
KEY LOCK
10. KEY LOCK switch
The KEY LOCK switch
secures the PMD671 in its
present state during
Record, Playback or Stop.
Card eject button
The Card eject button has two positions: click
out (a) and click in (b).
Slide the switch to the right to turn KEY LOCK on.
"Locked" is displayed for three seconds.
a
b
Only these controls will work:
Display LIGHT button.
POWER switch - Works during Playback or Stop.
PRE REC switch.
If you try to operate a button or switch that is
locked, "Locked" appears briefly in the display.
To eject a CF card:
1. If recording or in playback, push STOP
If other operations are in progress, cancel
.
TRACK TIME
L
00
40
20
12
6
2
0
over
-dB
R
Example display:
-dB
INT
MIC
them by pushing STOP
complete.
2. Open the CF card door*.
3. Push and release the Card eject button so it is
in the click out position (a).
or wait for them to
TRACK
Slide the switch to the right to turn KEY LOCK
off. "Unlocked" is displayed for three seconds.
4. Push the Card eject button from the click out
position to the click in position (b).
CHARGE
Left side
DIGITAL
IN
DC IN 15V
USB
OUT
*Opening the CF card door turns the PMD671 off. If recording
is in progress, opening the CF card door automatically stops
recording and writes critical track information to properly
close the file before turning off. Close the CF card door to re-
start the PMD671.
11
12
11. CHARGE indicator
CHARGE
The CHARGE indicator is
lit when an optional Ni-Cd
or
To insert a CF card:
1. Push and release the Card eject button so it is
in the click in posi-
tion (b above).
2. Fully insert the CF
card.
Ni-MH battery is charging.
12. CF card compartment
Pull the compartment door open to access the
CF card.
3. Close the CF card
door.
Note: If the CF card door won't latch, check that the Card
eject button is in the click in position (b above).
- 49 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Security
IN: Connect to the digital out of a digital audio
component. PCM audio data input at 44.1. 48,
88.2 and 96 kHz can be recorded.
Digi-IN must be selected using the INPUT button.
for the signal to be recorded. See page 18.
The supplied security screw
requires using a small Phillips
screwdriver to open the Memory
compartment door. The screw
(3mm x
10mm long)
reduces the possibility that the CF card will be mis-
placed or stolen.
OUT: Connect to the digital in of a digital audio
component.
• Only files with sampling frequencies of 44.1,
48, 88.2 or 96 kHz can be output.
• Digital audio is only output during normal or
EDL playback.
• The receiving component must be able to
accept audio in SPDIF (IEC-958-II) format.
• The receiving component must be able to
accept a sampling frequency of 44.1, 48, 88.2
or 96 kHz.
d
c
1. Remove the plastic pin (c) and then the
retainer (d).
DC IN 15V
2. Add the screw. Tighten the screw enough so
that the screw cannot be removed with a
fingernail.
14. DC IN 15V jack
Plug the supplied AC power
pack in this jack. The
power supplied is 1.0A at
15V AC.
The PMD671 automatically switches to adapter
power if it was running on battery power. If AC
power is interrupted by a power outage or un-
plugging the power pack, the PMD671 automati-
cally switches to battery power.
Left side continued
USB
13
15. USB port
Plug the supplied USB cable in
this port and connect the other
end to your computer (PC or
MAC).
CHARGE
DIGITAL
IN
DC IN 15V
USB
OUT
The USB (2.0) connection makes it easy to copy
audio files to your computer's hard drive or a CD.
This connection can only be made active when
the PMD671 is off (neither recording nor during
playback).
14 15
13. DIGITAL IN/OUT jacks
RCA jacks for connect-
DIGITAL
IN
ing the PMD671 to an
audio component that
accepts or outputs digital
OUT
audio signals.
- 50 -
Download from Www.Somanuals.com. All Manuals Search And Download.
A file titled PMD670.EDL and a folder (directory)
titled MPGLANG1 will appear on your computer.
Files within the MPGLANG1 folder are numbered
from 1001 through the number of tracks recorded
to a maximum of 1999. The file extension will be
.mp3, .wav, .bwf or .mpg depending on the Rec
Format parameters that were set for the record-
ing.
How to connect via the USB port
1
3
MARGIN RESET
2
POWER
i / O MENU/STORE
Root
PMD670.EDL
MPGLANG1
1. Connect the cable to the PMD671 and your
computer.
1001.MP3
2. Slide the PMD671's POWER switch to the
right and release to power off.
1002.MP3
3. Press and hold the USB MENU/STORE
button while you slide the POWER switch to
the right and release to power on.
1003.MP3
.
.
.
.
.
.
This display
appears:
1999.MP3
The CF card in the PMD671 appears as a re-
movable device on your computer. The audio
files are in a folder named MPGLANG1.
Diagram of file structure (assuming .mp3 files).
Changes made to file names or file structure on
your computer will prevent file recognition and
therefore playback in the PMD671.
CAUTION: Only copy audio files (tracks) to other
volumes. Do not modify or delete the EDL file. If
the EDL file is missing or damaged the PMD671
will be unable to recognize recorded tracks.
However, audio files from your computer that are
renamed using the file names and file structure
above may be playable on the PMD671. For
example, if you name an mp3 audio file
1234.MP3 and place it in the MPGLANG1 folder,
the PMD671 may play it.
See the enclosed CD for demo PMDEdit soft-
ware for computer audio file manipulation.
PMDEdit is a full featured software suite de-
signed for Marantz Professional digital recorders.
or by calling toll free (866) 405-2154.
Power off and power the PMD671 back on to
resume recording or playback.
- 51 -
Download from Www.Somanuals.com. All Manuals Search And Download.
microphone interviews. It attaches to
your microphone.
Right side
16
17 18
REMOTE
REMOTE
2
LINE
IN
L
PUSH
PUSH
R
MIC
PHANTOM
+48V
ON
REMOTE
2
LINE
IN
L
PUSH
PUSH
R
MIC
PHANTOM
+48V
ON
L
L
REMOTE
1
2
2
1
1
1
2
2
1
1
3
3
3
3
R
OFF
1
2
3
R
GND
HOT
COLD
OFF
1
2
3
GND
HOT
COLD
REMOTE 1
16. REMOTE1 jack
Plug a wired remote (not
supplied) in this jack.
The remote's four foot cord with a four contact
mini plug, plugs into the PMD671 while you carry
the PMD671 via its carry strap.
Wiring
diagram
The RC600 does not require any menu changes
for use. The RC600 includes:
A switch
connected to
the 2.5mm mini
jack off (open)
and on
(closed) does
the following,
depending on
a
a
An indicator light:
• (green) lit and steady
during standby or stop
• (red) lit and steady while
recording
b
c
d
2.5 mm jack
• (flashing red) during rec
pause
the RemoteMode setting:
• (orange) flashes for 1/2 second when an
over peak level signal is input during record-
ing or rec pause, then it goes back to red
• (green flash) for 2 seconds when an EDL
mark is added during recording
RemoteMode:
StartPause
From Rec or Playback Pause, switch remote
on to start recording. During record or play-
back, switch remote off to pause and on to
resume. If Auto Mark is On, an EDL mark is
added when recording resumes.
StrtStp TR
b press to pause recording
c
press to start/resume recording and to
manually increment tracks
d press to add an EDL mark while recording
Start or stop recording. When re-started, a
new track is begun.
18. LINE IN/OUT
jacks
EDL Mark
LINE
IN
LINE
OUT
During record or playback, switch remote to
on to add an EDL mark.
PWR REC
L
Plug external line
level audio devices
in these jacks.
During POWER off, switch remote to on to
turn power on and begin recording.
During recording, switch remote to off to stop
recording and power off.
R
LINE IN jacks
Plug Left and Right RCA audio cables in here to
connect to the output of an external unit.
Manual TRK
During recording, switch remote to on to
increment the track. A new track is created at
that point. There is no break in recording.
To record, mono, stereo, or LR mono LINE input
must be selected in the input select menu. See
INPUT button.
See page 44 for instructions on how to set or
change the Remote Mode.
REMOTE 2
17. REMOTE2 jack
The REMOTE2 jack is for the
optional RC600 remote.
The RC600 is designed for
- 52 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Dynamic microphone(s) can be used but do not
yield optimum audio quality recordings.
Right side continued
19
20
REMOTE
REMOTE
2
LINE
IN
L
PUSH
PUSH
R
MIC
PHANTOM
+48V
ON
Consult with your local dealer to select the
appropriate microphone(s) for your specific
application. They can demonstrate the various
performances and characteristics of microphones
for your use.
L
1
2
2
1
1
3
3
21
R
OFF
1
2
3
GND
HOT
COLD
LINE OUT jacks
Plug Left and Right RCA audio cables into these
jacks to connect to the input of an amplifier or
other external unit.
21. Carry studs
Attach the supplied carry
strap to these studs.
REMOTE
REMOTE
2
During playback, the output on the L or R channel
depends on the recording. For a Stereo or Dual
Mono recording, the setting of the AUDIO OUT
switch determines the output channel(s).
.
19. MIC IN jacks
REMOTE
2
Installing the carry strap
REMOTE
L
R
MIC
Plug external micro-
phones in these jacks.
MIC must be selected
using the INPUT
button.
1. Push the end of a strap
retainer with a round hole
onto a carry stud.
2
2
1
1
3
3
REMOTE
2
1
2
COLD
GND
3
HOT
2. Attach the carry
strap.
REMOTE
For mono recording. use the Left jack.
To record stereo with MIC input or LRmono with
MIC input, use both jacks.
3. Close the strap
retainer by 'buttoning'
the other end of strap
retainer over the
carry stud.
REMOTE
2
REMOTE
Notes:
•
•
XLR pin out is 1 ground, 2 hot and 3 cold.
Microphones with a PHONE jack can be used with an
adapter (not supplied) from
PHONE to XLR.
PHANTOM
4. Repeat 1-3 for other carry stud.
+48V
ON
20. PHANTOM +48V switch
Switch to ON to provide 48V
of power for a condenser
microphone(s).
22
ON: +48V is supplied to
OFF
power condenser
microphone(s).
OFF: No microphone power is supplied.
Bottom
22. Battery com-
partment
Microphone recommendations
Professional condenser microphone(s) (which
require additional power either from phantom
power from the PMD671 or another source) are
recommended because they provide greater
sensitivity and higher quality audio recording.
Press and slide
at arrow to open
the Battery
compartment.
- 53 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery power
The PMD671 can operate on several types of
battery power.
tab
Hint:
Keep fully charged batteries in the PMD671
when recording using AC power because as
much as 30 seconds of your recording could be
lost if AC power is interrupted.
ribbon
Eight AA alkaline batteries and the supplied
battery holder can be used. Alkaline batteries
can power recording or playback for about *6
hours.
Install the battery holder with tab as shown and
over the ribbon for easy battery holder removal.
Replace the battery compartment cover**.
AA size rechargeable Ni-Cd or Ni-MH batteries
can be used in the supplied battery holder, but
they cannot be recharged with the PMD671's
built in charger.
Installing an optional Ni-Cd or Ni-MH battery
An optional Ni-Cd battery model RB1100 can be
charged in the PMD671. Ni-Cd batteries can
power recording or playback for about *5 hours.
tab
An optional Ni-MH (Nickel metal hydride) battery
model RB1651 can be used and recharged with
the PMD671's built-in charger. Ni-MH batteries
can power recording or playback for about *7
hours.
ribbon
*Using compact flash media.
Install the battery with tab as shown and over
the ribbon for easy battery removal**.
Charging the optional Ni-Cd battery
• Load the Ni-Cd battery correctly in the
battery compartment.
Installing AA size batteries:
Power off and turn the PMD671 upside down.
• Connect the AC power pack and plug into
power supply.
• Select Ni-Cd in the Batt type menu (page
30).
• Power the PMD671 on, then off for the
charging cycle to begin.
Press and push in the direction of the arrow to
remove the battery
compartment
cover.
• The PMD671 must be off during battery
charging.
Install 8 AA size
batteries to the
While charging (about 3 hours), the CHARGE
indicator will be lit and steady.
When the Ni-Cd battery charge cycle is com-
plete, the CHARGE indicator will be off.
battery holder with the -
ends towards the
springs.
**When changing battery type, be sure you change
the Batt type menu setting for optimal battery
performance.
- 54 -
Download from Www.Somanuals.com. All Manuals Search And Download.
settings etc. Associated labels are display
items 1-7, 9 and 10.
Display
8
9 10 11 12 13 14
1
2 3 4 5 6 7
9. AM / PM label
Displays AM or PM when clock time is dis-
played.
TOTALTRACKTIME
REC REMAIN kbps
A-B
L
-dB
R
00
12
0
20
over
40
6
2
kHz
AM
PM
-dB
S.SKIP
INT
MIC
LINE
TRACK
MARK
10. kHz label
The kHz label appears to indicate that the
last five places in the upper alphanumeric
display show frequency in kilohertz.
15 16
17
1. REC label
The REC label appears to indicate TOTAL
REC TIME or REC TIME REMAINING dis-
played on the upper alphanumeric display.
11. L -dB R level meter labels
L is the label for the Left (upper) level meter.
-dB is the label for the center level meter
scale in decibels.
2. TOTAL label
R is the label for the Right (lower) level
meter.
The TOTAL label appears to indicate TOTAL
REC TIME or TOTAL REC TIME REMAINING
displayed on the upper alphanumeric display.
12. Upper level meter
The louder the sound input to the recorder on
the Left channel, the more bars are dis-
played.
3. TRACK label
The TRACK label appears with other labels in
this area to indicate TRACK TIME displayed
on the upper alphanumeric display.
13. Decibel scale
The scale in dB (decibels) for the upper and
lower level meters.
4. REMAIN label
The REMAIN label appears to indicate REC
TIME REMAINING or TOTAL REC TIME
REMAINING displayed on the upper alphanu-
meric display.
14. Lower level meter
The louder the sound input to the recorder on
the Right channel, the more bars are dis-
played.
5. TIME label
The TIME label appears to indicate REC TIME
REMAINING, TOTAL REC TIME REMAINING
or TRACK TIME displayed on the upper
alphanumeric display.
15. TRACK label
The TRACK label appears to indicate that the
number displayed on the left of the lower
alphanumeric display is the track number.
6. kbps label
16. MARK label
The kbps label appears to indicate that the
first five places in the upper alphanumeric
display are kilobytes per second.
The MARK label appears to indicate that the
number displayed on the left of the lower
alphanumeric display is the EDL Mark num-
ber.
7. A-B label
A- indicates that the beginning (A point) of an
A-B loop has been set.
A-B indicates that the ending (B point) of an
A-B loop has also been set.
17. Lower alphanumeric display
Displays a variety of information including
remaining recording algorithm, date, track
number, number of tracks on CF card, EDL
Mark number, number of EDL Marks on CF
card etc. Associated labels are display items
15 and 16.
8. Upper alphanumeric display
Displays a variety of information including
remaining recording time, clock time, menu
- 55 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TOTALTRACKTIME
REC REMAIN kbps
A-B
L
-dB
R
00
12
0
20
over
40
6
2
kHz
AM
PM
-dB
S.SKIP
INT
MIC
LINE
TRACK
MARK
18 19 20 21 22 23 24 25 26
flashing indicates that the battery has
18. MIC / INT MIC label
The MIC label appears when external micro-
phones are selected.
approximately 1 to 3 minutes of record or
playback time remaining.
The INT MIC label appears when input se-
lected for recording is the internal micro-
phone.
The CHARGE indicator light will flash. If
BEEP is set to On, the PMD671 will also
beep.
19. LINE label
The LINE label appears when input(s) se-
lected for recording is (are) the LINE IN jacks.
If the PMD671 continues to operate, it will
automatically shut down. If recording, it will
write track information, stop recording and
power off. If in playback, it will stop playback
and power off.
20. Record
The Record symbol appears when the
PMD671 is in record mode. It appears with
the Play symbol when recording. It appears
with the pause symbol and flashing when in
record pause.
indicates that the battery charge is de-
pleted.
24. S.SKIP label
The S.Skip label appears when Silent Skip is
enabled.
21. Play
The Play symbol appears when the PMD671
is in playback, playback pause, recording or
record pause.
25. Margin level
The Margin level is displayed. The PMD671
holds this display at the highest level
achieved during the current recording. If
more than 0 dB, OV is displayed. To reset
the Margin level, press and release the
MARGIN RESET button.
22. Pause
The Pause symbol appears when the
PMD671 is in playback pause or record
pause.
26. -dB label
23. Battery
The -dB label applies to the Peak level
display.
When on battery power, the Battery symbol
appears in most displays to indicate battery
charge.
Care and Maintenance
indicates that the battery charge is good.
indicates that the battery charge is getting
low and there is approximately 5 to 10 min-
utes of record or playback time available.
Use a soft cloth slightly moistened with mild
detergent solution.
- 56 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording time chart
The recording time available (Hours:Minutes:Seconds) on a CF card depends on the size of the card in mega-
bytes (MB), the recording type (PCM, MP2 or MP3), mono or stereo, bit rate, sample rate, and byte size (8, 16, or
24). This recording time chart lists approximate recording times based on those factors.
All times are approximate.
- 57 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Rec Format charts
Analog inputs
Fs kHz and
(Bit rate kbps)
Audio
Format
Channel(s)
File ext.
wav/bwf
mpg/bwf
BWF ext.
24 bit
96, 88.2, 48, 44.1
PCM
48, 44.1, 32, 24, 22.05,
16, 12, 11.025, 8
16 bit
Stereo
48, 44.1, 32
(384, 256, 192, 128, 96, 64)
MP2
MP3
48, 44.1, 32
(320, 256, 160, 128, 80, 64)
mp3/bwf
mp3/bwf
24, 22.05, 16
(160, 128, 80, 64, 40, 32)
wav/bwf
96, 88.2, 48, 44.1
24 bit
16 bit
wav/bwf
PCM
48, 44.1, 32, 24, 22.05,
16, 12, 11.025, 8
Mono
48, 44.1, 32
(192, 128, 96, 64, 48, 32)
MP2
MP3
mpg/bwf
mp3/bwf
mp3/bwf
48, 44.1, 32
(160, 128, 80, 64, 40, 32)
24, 22.05, 16
(80, 64, 40, 32, 24, 16)
Digital input (shaded values set by input source)
Fs kHz and
Audio
Format
Channel(s)
File ext.
BWF ext.
(Bit rate kbps)
96, 88.2, 44, 44.1
48 , 44.1
24 bit
wav/bwf
PCM
16 bit
Stereo
48, 44.1
(384, 256, 192, 128, 96, 64)
MP2
MP3
mpg/bwf
mp3/bwf
48, 44.1
(320, 256, 160, 128, 80, 64)
wav/bwf
24 bit
16 bit
96, 88.2, 44, 44.1
48 , 44.1
wav/bwf
PCM
Mono
48, 44.1
(192, 128, 96, 64, 48, 32)
MP2
MP3
mpg/bwf
mp3/bwf
48, 44.1
(160, 128, 80, 64, 40, 32)
- 58 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu defaults
- 59 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Cannot Time Shift (display says Cannot . . .)
• Read After Write/Time Shift features are not
available in 24 bit recording
TROUBLESHOOTING
Should faults occur, it is often unnecessary to consult
your dealer or technical service department. On the
basis of the following checks, you may be able to
rectify a number of conditions yourself without diffi-
culty. If the condition cannot be remedied after the
following check, please consult your dealer or contact
Marantz Professional toll free at (866) 405-2154.
PC cannot read files
• check if the files are MP2 or MP2 with a .wav file
extension. Some PC's cannot interpret this
combination. Try renaming the MP2 file so it has
a .mp2 or .mp3 file extension.
• check the capability of the PC program
Some playback and editing programs do not
support MP2/MP3, Broadcast Wave (.bwf) or 24-
bit formats. Consult the Marantz Professional web
support MP2/MP3 and Broadcast Wave Format.
The PMD671 does not turn on
Check power
• install fresh batteries
• check AC adaptor connections
The PMD671 turns on then turns itself off
• install fresh batteries
The rechargeable battery is not recharging
• check that the CHARGE indicator is lit and steady
during charging and off when charging is com-
plete
• check AC power pack connections
• check that Power is turned off on the PMD671
The PMD671 seems to record, but there is no sound
on playback
• check input setting (For example, if LINE input is
selected and no input is connected to the LINE IN
jacks, the PMD671 will record silence.)
The PMD671 will not playback
• check EDL switch, if ON switch to OFF
The rechargeable battery life is low
• make sure you fully charge and discharge the Ni-
Cd battery during each charge cycle
• replace battery
No audio playback through headphones or internal
speaker
• check HP/SPK VOLUME control setting
• check a different track or CF card
Media cards that are heavily used should be occa-
sionally reformatted to avoid audio problems due to
fragmentation.
The PMD671 will not record
• try a different CF card
• check that the maximum of 999 tracks have not
been recorded
• check that the PMD671 acknowledges the CF
card
If the PMD671 exhibits erratic behavior, the micropro-
cessor can be reset by, powering off, disconnecting
AC power and removing batteries.
Error Messages
Display
Description
No signal from microphone input
• check input selection
• check REC level control settings
• check if microphone(s) require Phantom power
CF Card
NO_CARD
UNFORMAT
FULL_CARD
No CF card inserted, or card is not detected.
Initializing of CF card failure or track information renewal failure.
Remaining capacity of CF card is less than a few kbytes.
"You Need
FormatOnPC"
CF card is not formatted.
Excessive noise
• check cable connections
• turn off power to the PMD671, unplug the AC
adapter, remove batteries, and then reinstate
power to the unit (Complete Reset).
Format Fail
NO_FILE
FULL_999
Can not…
Mark_255
No_Good
Others
Formatting failure.
Correct file does not exist.
The number of tracks on the CF card has reached the 999 maximum.
A track for which playback is not available was output.
The number of EDL marks on the card has reached the 255 maximum.
Accessing speed of the CF card is not suitable.
A corrupt digital audio signal was received during recording with digital input.
UnLock
Playback on a PC results in poor sound
• check quality of PC sound card and program
• check frequency conversion program*
Unsupport
A digital audio signal with a corrupt sample rate was received during recording with
digital input, or a corrupt file format is set up.
"NO_EDL
EDLERROR-A"
A or B point for EDL A-B loop was not found.
Verify Err
A verify error was detected during recording while the menu choice Verify is "On".
DSP ERROR
DSP processing error.
*The PMD671 records audio files with a sampling
frequency of 48kHz. Some PC programs convert
the files to 44.1kHz (using a sample rate con-
verter). Only high quality sample rate converters
should be used.
Can not… E1
Time Shift Playback is not available on the CF card which was recorded on the PMD660.
Can not… E2
Can not… E3
Time Shift Playback is not available between tracks having different sampling frequencies
or audio formats i.e. MP2 and MP3.
Read After Write is not available during recording with MP2, or 24 bits and
96/88.2 kHz PCM.
Verify is not available during recording with MP2, or 24 bits and 96/88.2kHz PCM
F.FWD/F.REV or Seek+/- search is not available on the VBR (Variable Bit Rate) file.
Cannot Card Check because there is too little remaining card capacity.
Wave format error was detected during PCM file playback.
Can not… E4
Can not… E5
Can not… E6
Can not… E7
Cannot Read After Write (display says Cannot . . ,)
- 60 -
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS*
Digital audio system
General
Headphone Output power............... 20 mW/32 ohms
Speaker Output power ...................... 70 mW/4 ohms
Phantom power......................................... +48V/7mA
Power consumption
Recording/Playback......................................... 6 W
Charging ................................................ 12 W max
Standby (battery driven) ............................ 2.9 mW
Battery life (Alkaline) ........................ 6 hours (typical)
Dimensions
System ........................................ Solid State Recorder
Usable Media ................. CF memory/Microdrive cards
Recording and media methods
.mp2.........................MPEG1 Layer II compression
.mp3........................MPEG1 Layer III compression
.mp3...................... MPEG2 Layer III compression*
*for all half sample rates.
PCM....................................... 16/24 bit linear PCM
Recording bit rate (selectable)
Width ............................................. 264 mm (10.4")
Height ................................................ 55 mm (2.0")
Depth ............................................... 185 mm (7.3")
Weight ....................................... 1.3 kg (2 lbs. 14 oz.)
Included accessories
MP2 mono .................. 192, 128, 96, 64, 48, 32 kbps
MP2 stereo ............... 384, 256,192,128, 96, 64 kbps
MP3 mono ...... 160, 128, 80, 64, 40, 32, 24, 16 kbps
MP3 stereo .. 320, 256, 160,128, 80, 64, 40, 32 kbps
Sampling frequency
AC adapter ...........................................................1
Battery holder .......................................................1
Carry strap ............................................................1
Carry strap retainers .............................................2
Screws (ISO 3x10 mm) ........................................3
Plastic pin and retainer .........................................1
USB cable.............................................................1
User Guide ...........................................................1
Analog
24bit PCM ........................... 96, 88.2, 48, 44.1 kHz
16bit PCM .....................................48, 44.1, 32, 24,
....................................22.05, 16, 12, 11.025, 8 khz
MP2 ............................................. 48, 44.1, 32 kHz
MP3 ..................... 48, 44.1, 32 , 24, 22.05, 16 kHz
Digital ..................................... 96, 88.2, 48, 44.1 kHz
Number of channels ...................... 2 (stereo), 1 (mono)
Frequency response ........... 44kHz (-0.5dB, fs=96kHz)
Signal-to-Noise Ratio
IEC-A weighted ....................................... LINE 92 dB
MIC 65 dB
Total Harmonic Distortion
at 0 VU (PCM)........................................ LINE 0.01%
MIC 0.03%
Dynamic Range................................................... 94 dB
Optional accessories** [availability]
Ni-Cd battery pack ..................................... RB1100
Ni-MH battery pack ....................................RB1651
Carrying cover (vinyl)................................ CLC670
Carrying bag [US, Europe, only] ............... PRC300
Professional reporter's bag
[US, Europe, only] .............................. PRC600
Attache carrying case [US only] ..................CA200
Inputs
MIC IN L/R
*Specifications subject to change without notice.
Type ....................... XLR (1:GND, 2:HOT, 3:COLD)
Input Sensitivity (MIC) ............ 1.2 mVrms/3 kohms
LINE IN L/R
Record setting recommendations
Type ......................................................... RCA jack
Input Sensitivity ................... 300 mVrms/22 kohms
DIGITAL IN
Recording a meeting
LEVEL CONT. switch at ALC.
ANC switch at
.
Type ......................................................... RCA jack
Input impedance ....................................... 75 ohms
Standard input level .................................. 0.5 Vp-p
Sampling frequency ............ 96, 88.2, 48, 44.1 kHz
Format .............................. SPDIF (IEC 958 TypeII)
Factory default settings.
Input: INT MIC mono or MIC mono
Menu settings:
Preset 2
Recording music
LEVEL CONT. switch at MANUAL.
ANC switch at FLAT.
Input: MIC stereo
Menu settings:
Preset 1
Outputs
LINE OUT L/R
Type ......................................................... RCA jack
Standard level...................... 2 Vrms max./2 kohms
DIGITAL OUT
Type ......................................................... RCA jack
Output impedance .................................... 75 ohms
Standard output level................................ 0.5 Vp-p
Sampling frequency ............ 96, 88.2, 48, 44.1 kHz
Format .............................SPDIF (IEC-958 Type II)
Menu settings (highest quality):
Preset 3
- 61 -
Download from Www.Somanuals.com. All Manuals Search And Download.
How You Can Get Service
LIMITED WARRANTY
1.
If your unit needs service in the USA, contact our
service referral at the appropriate telephone number
indicated below. We will advise you of the name and
location of one or more authorized service centers
from which service may be obtained. Please do not
return the unit directly to us.
You must pay any shipping charges if it is necessary to
ship the product for service. If the necessary repairs
are covered by the warranty, we will pay return
shipping charges to your location anywhere in the
United States or its territories.
Your Marantz Professional product is warranted against
manufacturer defects in material and workmanship for a
period of one year parts and labor.
Except as specified below, this warranty covers defects in
material and workmanship. The following are not covered
under warranty:
2.
3.
1. Damage, deterioration, malfunction or failure to meet
performance specifications resulting from:
a) Accidents, acts of nature, misuse, abuse, neglect or
unauthorized product modification.
Whenever warranty service is required, you must
present the original dated sales receipt or other proof
of date purchased.
b) Improper installation, removal or maintenance, or
failure to follow supplied instructions.
c) Repair or attempted repair by a non-Marantz
authorized agent.
Limitation of Implied Warranties
d) Any shipment (claims must be presented to the
carrier).
e) Any cause other than a defect of manufacturing.
All implied warranties, including warranties of merchantabil-
ity and fitness for a particular purpose, are limited in
duration to the length of this warranty.
2. Cleaning, check-ups with no fault found or changes
incurred for installation, removal or reinstallation of the
product.
Exclusion of Damages
Liability for any defective product is limited to repair or
replacement of the product at manufacturer’s option.
Manufacturer shall not be liable for damage to other
products caused by any defects in Marantz products,
damages based on inconvenience or loss of use of the
product, or any other damages, whether incidental, conse-
quential, or otherwise.
3. Any serialized product on which the serial number has
been defaced, modified or removed.
4. Batteries and battery chargers.
5. Accessories, including but not limited to: cables, mount-
ing hardware and brackets, cleaning accessories, power
cords and adapters, and carry cases.
Some States do not allow limitations on how long an implied
warranty lasts and/or do not allow the exclusion or limitation
of incidental or consequential damages, so the above
limitations and exclusions may not apply to you.
6. Products purchased outside of the United States, its
possessions or territories.
How State Law Relates to the Warranty
Non-transferable warranty
This warranty gives you specific legal rights, and you may
have other rights which may vary from State to State.
This Warranty may be enforced only by the original pur-
chaser.
Marantz Professional Service Number:
What We Will Pay For
Marantz Professional Factory Service (630) 741-0330, toll
free within the US (866) 405-2154.
We will pay for all labor and material expenses for items
covered by the warranty.
This warranty is enforceable only in the United States and
its possessions or territories.
- 62 -
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Marantz is a registered trademark.
2005/3
Download from Www.Somanuals.com. All Manuals Search And Download.
|