Marantz Flat Panel Television PDxx01 User Manual

PDxx01 RS-232C Control  
Specification : Rev.1.0  
PDxx01  
RS-232C Control Specification  
Category  
:
:
Plasma Display  
1.0  
Document Version  
Author(s)  
Date  
:
:
:
Marantz America, Inc.  
2006/12/07  
49  
Number of Page  
Marantz America, Inc. 2006  
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of copyright.  
All specifications might be subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 3 / 49  
Document Version [1.0]  
5-38. HD Select..................................................................................................................................................... 26  
5-39. LANGUAGE Select...................................................................................................................................... 26  
5-40. COLOR SYSTEM Select............................................................................................................................. 27  
5-41. FREQUENCY Request (SIGNAL INFORMATION)..................................................................................... 27  
5-42. Input MODE Request .................................................................................................................................. 29  
5-43. VIDEO ADJ. Request .................................................................................................................................. 29  
5-44. Audio Select Request.................................................................................................................................. 31  
5-45. Failure Mode Request ................................................................................................................................. 32  
5-46. MODEL NAME Request.............................................................................................................................. 33  
5-47. LOW TONE (50inch only)............................................................................................................................ 34  
5-48. COLOR TUNE ............................................................................................................................................. 34  
5-49. GAMMA GAIN Data..................................................................................................................................... 35  
5-50. Running Sense............................................................................................................................................ 35  
5-51. OSM ORBITER ........................................................................................................................................... 36  
5-52. Input Skip..................................................................................................................................................... 36  
5-53. SERIAL No. Request................................................................................................................................... 36  
5-54. S1/S2 SELECT............................................................................................................................................ 37  
5-55. SOFT FOCUS.............................................................................................................................................. 37  
5-56. BLACK LEVEL SELECT.............................................................................................................................. 37  
5-57. MULTI (SPRIT) SCREEN Select................................................................................................................. 38  
5-58. SUB PICTURE DETECT SELECT.............................................................................................................. 39  
5-59. ZOOM NAVIGATION SELECT.................................................................................................................... 40  
5-60. PICTURE FREEZE SELECT....................................................................................................................... 40  
5-61. PICTURE FREEZE (Pause) Command ...................................................................................................... 41  
5-62. OSM CONTRAST SELECT......................................................................................................................... 41  
5-63. CC (Closed caption) SELECT..................................................................................................................... 41  
5-64. CC (Closed caption) CONTRAST SELECT ................................................................................................ 42  
5-65. PICTURE MEMORY Select......................................................................................................................... 42  
5-66. PICTURE MEMORY Set ............................................................................................................................. 43  
5-67. PICTURE MEMORY NOTE WRITE Set...................................................................................................... 43  
5-68. SET UP LEVEL SELECT............................................................................................................................. 44  
5-69. BACK GROUND SELECT........................................................................................................................... 44  
5-70. PDP SAVER AUTO Select........................................................................................................................... 45  
5-71. Audio HDMI Request................................................................................................................................... 45  
5-72. POWER ON MODE (INPUT)....................................................................................................................... 45  
5-73. POWER ON MODE (VOLUME).................................................................................................................. 46  
5-74. 74. SUB PICTURE RATE set ...................................................................................................................... 46  
5-75. MULTI (SPRIT) SCREEN POWER ON MODE SET................................................................................... 47  
5-76. REMOTE CODE SETTING ......................................................................................................................... 48  
5-77. VOLUME Gain Data REQUEST.................................................................................................................. 48  
5-78. UNDER SCAN SETTING ............................................................................................................................ 48  
6. Revision history ................................................................................................................................ 49  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 4 / 49  
Document Version [1.0]  
1. Application  
These specifications are applicable to plasma monitors and communications control from external equipment.  
"Please also support the command of VP series and refer to the manual of the conventional model about  
specification."  
2. Connections  
Connections should be made as described below.  
External equipment  
plasma monitor  
e.g., Personal computer  
2-1.Connector on the plasma monitor side: EXTERNAL CONTROL connector.  
Type of connector: D-Sub 9-pin male  
No. Pin Name  
1
2
3
4
5
6
7
8
9
No Connection  
RXD (Receive data)  
TXD (Transmit data)  
DTR (DTE side ready)  
GND  
DSR (DCE side ready)  
RTS (Ready to send)  
CTS (Clear to send)  
No Connection  
2-2.Connector on the external equipment side: Serial port (RS-232C) connector.  
See the specifications of the equipment that is to be connected for the type of connector and pin assignment.  
2-3.Wiring  
Use a crossed (reverse) cable.  
Wire the cable so that each pair of data lines crosses between the two devices. These data line pairs are RXD (Receive data)  
and TXD (Transmit data), DTR (DTE side ready) and DSR (DCE side ready), and RTS (Ready to send) and CTS (Clear to  
send).  
2-4.Communication Parameters  
(1) Communication system Asynchronous  
(2) Interface  
RS-232C  
9600 bps  
8 bits  
(3) Baud rate  
(4) Data length  
(5) Parity  
Odd  
(6) Stop bit  
1 bit  
(7) Communication code  
Hex  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 5 / 49  
Document Version [1.0]  
3. Communication Format  
8bit  
8bit 8bit  
8bit  
8bit  
8bit  
8bit  
8bit  
Command 1  
Unit ID 1  
Unit ID 2  
Command 2  
Data length  
Data  
Check sum  
3-1.Command1  
Command 1, along with command 2, is a number used to distinguish each command.  
Bit1, Bit0: 11Bor 10B :Usually, a form  
In the case of ACK, when the lower order 4 bits is FH (as in 3FH and 7FH), this indicates that the commands and data of the  
supported equipment have been received. When the lower order 4 bits is BH (as in 3BH and 7BH), this indicates that  
unsupported commands and data have been received.  
3-2.Unit ID1,2 (UA1,UA2)  
Unit ID 1 and unit ID 2 are numbers used to identify the equipment that is to be connected.  
60H is used for the plasma monitor and 80H is used for external control equipment such as a personal computer.  
3-3.Command 2  
Command 2, along with command 1, is a number used to distinguish each command.  
3-4.Check Sum (CKS), Error Processing, and ACK  
1) The check sum described below and RS-232C odd parity are used together for a check of the received data. The check  
sum is the lower order 8 bits of one frame of sent or received data comprising the sum total of Command 1, Unit ID 1 and  
2, Command 2, Data Length, and Data.  
Check Sum Example  
DFH  
80H  
60H  
47H  
01H  
01H  
08H  
Command1 Unit ID1  
Unit ID2  
Command2  
Data Length  
Data  
Check Sum  
Total 208H  
2) Error Processing  
• When the communication interval is vacant for more than 4 ms, thereafter a received Command 1 will be recognized. If,  
at this time, meaningful data cannot be recognized, that data will not be recognized (as valid data).  
• An ACK will not be returned unless the receive data error, the check sum error, and the receive data are all taken in.  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 6 / 49  
Document Version [1.0]  
4. Command Reference List  
CMD1  
9FH  
9FH  
DFH  
DFH  
9FH  
9FH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
1FH  
DFH  
DFH  
DFH  
DFH  
DFH  
1FH  
1FH  
1FH  
1FH  
1FH  
1FH  
DFH  
DFH  
DFH  
1FH  
DFH  
5FH  
1FH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
CMD2  
4EH  
4FH  
47H  
7FH  
3EH  
3FH  
7FH  
7FH  
7FH  
7FH  
7FH  
0AH  
00H  
7FH  
7FH  
7FH  
C0H  
7FH  
7FH  
7FH  
51H  
7FH  
7FH  
7FH  
7FH  
7FH  
7FH  
7FH  
1AH  
1AH  
C6H  
C1H  
6BH  
C8H  
54H  
70H  
8BH  
8AH  
5BH  
5CH  
26H  
41H  
45H  
6FH  
3FH  
17H  
0CH  
0DH  
13H  
88H  
5FH  
61H  
15H  
89H  
65H  
8FH  
07H  
7AH  
7BH  
LEN  
00H  
00H  
01H  
03H  
00H  
00H  
03H  
03H  
03H  
03H  
03H  
01H  
01H  
04H  
04H  
04H  
01H  
03H  
03H  
03H  
01H  
03H  
03H  
03H  
03H  
03H  
03H  
03H  
02H  
02H  
01H  
01H  
03H  
04H  
00H  
02H  
01H  
01H  
01H  
01H  
00H  
00H  
00H  
00H  
00H  
00H  
01H  
08H  
04H  
00H  
01H  
01H  
00H  
01H  
01H  
01H  
01H  
01H  
01H  
01  
02  
03  
04  
05  
06  
07  
08  
09  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
Power ON  
Power OFF  
Input Switch Change  
VOLUME Gain Data  
AUDIO Mute ON  
AUDIO Mute OFF  
CONTRAST Gain Data  
BRIGHT Gain Data  
SHARPNESS Gain Data  
Color Gain Data  
TINT Gain Data  
PICTURE MODE Select  
COLOR TEMP SELECT  
RED Gain Data  
GREEN Gain Data  
BLUE Gain Data  
NR MODE Set  
BASS Gain Data  
TREBLE Gain Data  
BALANCE Gain Data  
SCREEN MODE Select  
V.POSITION Gain Data  
H.POSITION Gain Data  
V-HEIGHT Gain Data  
H-WIDTH Gain Data  
AUTO PICTURE Select  
PHASE Gain Data (FINE PICTURE Set)  
CLOCK Gain Data (PICTURE ADJUST Set)  
OSM ADJ. position Data  
POWER MGT Select  
GRAY LEVEL Set  
CINEMA MODE Set  
LONG LIFE Set (PDP SAVER Set)  
SCREEN WIPER Set  
ALL RESET  
Audio Select Set  
RGB Select  
HD Select  
LANGUAGE Select  
COLOR SYSTEM Select  
FREQUENCY Request  
Input MODE Request  
VIDEO ADJ Request  
Audio Select Request  
Failure Mode Request  
MODEL NAME Request  
LOW TONE  
COLOR TUNE  
GAMMA Gain Data  
Running Sense  
OSM OBITER  
Input Skip  
SERIAL No. Request  
S1/S2 SELECT  
SOFT FOCUS  
BLACK LEVEL (DIGITAL SIGNAL LEVEL)  
MULTI(SPRIT) SCREEN Select  
SUB.P DETECT  
ZOOM NAV  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 7 / 49  
Document Version [1.0]  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
PICTURE FREEZE  
PAUSE COMMAND  
OSM CONTRAST  
CLOSED CAPTION  
CAPTION CONTRAST  
PICTURE MEMORY Select  
PICTURE MEMORY Set  
PICTURE MEMORY NOTE WRITE  
SET UP LEVEL  
BACK GROUND  
PDP SAVER AUTO select  
Audio HDMI Request  
POWER ON MODE (INPUT)  
POWER ON MODE (VOLUME)  
SUB PICTURE RATE set  
MULTI (SPRIT) SCREEN POWER ON MODE SET  
REMOTE ID CODE SETTING  
VOLUME Gain Request  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
DFH  
1FH  
DFH  
DFH  
DFH  
DFH  
DFH  
1FH  
DFH  
7CH  
7DH  
37H  
3CH  
3DH  
38H  
25H  
2DH  
35H  
36H  
2CH  
3AH  
63H  
0FH  
DAH  
33H  
2BH  
0EH  
22H  
01H  
01H  
01H  
01H  
01H  
01H  
02H  
0CH  
01H  
01H  
01H  
00H  
04H  
01H  
02H  
04H  
01H  
00H  
01H  
UNDER SCAN SETTING  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 8 / 49  
Document Version [1.0]  
5. Command  
5-1.Power ON  
Function  
The external control equipment switches on the power of the plasma monitor.  
Transmission Data  
9FH 80H 60H 4EH 00H CKS  
ACK  
The plasma monitor returns the following ACK when the power is switched on.  
3FH 60H 80H 4EH 00H CKS  
NOTE: Do not set the Power ON or Power OFF command continuously.  
5-2.Power OFF  
Function  
The external control equipment switches off the power of the plasma monitor.  
Transmission Data  
9FH 80H 60H 4FH 00H CKS  
ACK  
The plasma monitor returns the following ACK when the power is switched off.  
3FH 60H 80H 4FH 00H CKS  
NOTE: Do not set the Power ON or Power OFF command continuously.  
5-3.Input Switch Change  
Function  
The external control equipment switches the input of the plasma monitor.  
Transmission Data  
DFH 80H 60H 47H 01H DATA00 CKS  
DATA00 : Input Select  
01H : Video1  
02H : Video2  
05H : DVD/HD1  
06H : DVD/HD2  
07H : PC/RGB  
0EH : DVD/HD3(HDMI)  
1AH : DVD/HD4(HDMI)  
ACK  
The plasma monitor returns the following ACK when the input is switched.  
3FH 60H 80H 47H 00H CKS  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 9 / 49  
Document Version [1.0]  
5-4.VOLUME Gain Data  
Function  
The external control equipment changes the VOLUME gain data of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS  
DATA00: USER SOUND Gain Flag  
DATA01: VOLUME Gain Flag  
DATA02: VOLUME Gain  
05H  
01H  
00H: Step0  
:
0AH: Step10 (Default)  
:
2AH: Step42  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER SOUND Gain Flag  
DATA01: VOLUME Gain Flag  
05H  
01H  
5-5.AUDIO Mute ON  
Function  
The external control equipment switches on AUDIO Mute of the plasma monitor.  
Transmission Data  
9FH 80H 60H 3EH 00H CKS  
ACK  
3FH 60H 80H 3EH 00H CKS  
5-6.AUDIO Mute OFF  
Function  
The external control equipment switches off AUDIO Mute of the plasma monitor.  
Transmission Data  
9FH 80H 60H 3FH 00H CKS  
ACK  
3FH 60H 80H 3FH 00H CKS  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 10 / 49  
Document Version [1.0]  
5-7.CONTRAST Gain Data  
Function  
The external control equipment changes the CONTRAST gain data of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: CONTRAST Gain Flag  
DATA02: CONTRAST Gain  
01H  
07H  
CCH: -52  
:
FFH: -01  
00H: 0  
01H: +01  
:
14H: +20  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: CONTRAST Gain Flag  
01H  
07H  
5-8.BRIGHT Gain Data  
Function  
The external control equipment changes the BRIGHT gain data of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: BRIGHT Gain Flag  
DATA02: BRIGHT Gain  
01H  
08H  
E0H: -32  
:
FFH: -01  
00H: 0  
01H: +01  
:
20H: +32  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: BRIGHT Gain Flag  
01H  
08H  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 11 / 49  
Document Version [1.0]  
5-9.SHARPNESS Gain Data  
Function  
The external control equipment changes the SHARPNESS gain data of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: SHARPNESS Gain Flag  
DATA02: SHARPNESS Gain  
01H  
06H  
F0H: -16  
:
FFH: -01  
00H: 0  
01H: +01  
:
10H: +16  
Only when a RGB signal is connected  
DATA02 : SHARPNESS Gain  
01H: 1  
02H: 2  
03H: 3  
04H: 4  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: SHARPNESS Gain Flag  
01H  
06H  
5-10. COLOR Gain Data  
Function  
The external control equipment changes the COLOR gain data of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: COLOR Gain Flag  
DATA02: COLOR Gain  
01H  
04H  
E0H: -32  
:
FFH: -01  
00H: 0  
01H: +01  
:
20H: +32  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: COLOR Gain Flag  
01H  
04H  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 12 / 49  
Document Version [1.0]  
5-11. TINT Gain Data  
Function  
The external control equipment changes the TINT gain data of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: TINT Gain Flag  
DATA02: TINT Gain  
01H  
05H  
E0H: -32  
:
* TINT Gain is from -22 (EAH) to  
+22 (16H) only during video.  
FFH: -01  
00H: 0  
01H: +01  
:
20H: +32  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: TINT Gain Flag  
01H  
05H  
5-12. PICTURE MODE Select  
Function  
The external control equipment sets the picture mode of the plasma monitor.  
Transmission Data  
DFH 80H 60H 0AH 01H DATA00 CKS  
DATA00: 01H: NORMAL  
02H: THEATER1 (It cannot choose in the still picture input of a personal computer.)  
03H: THEATER2 (It cannot choose in the still picture input of a personal computer.)  
04H: Default  
05H: Bright  
ACK  
7FH 60H 80H 0AH 01H DATA00 CKS  
DATA00: 01H: NORMAL  
02H: THEATER1  
03H: THEATER2  
04H: Default  
05H: Bright  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 13 / 49  
Document Version [1.0]  
5-13. COLOR TEMP SELECT  
Function  
The external control equipment changes the COLOR TEMP of the plasma monitor.  
Transmission Data  
DFH 80H 60H 00H 01H DATA00 CKS  
DATA00:  
00H: low  
01H: middle  
02H: high  
03H: middle low  
ACK  
7FH 60H 80H 00H 01H DATA00 CKS  
DATA00:  
00H: low  
01H: middle  
02H: high  
03H: middle low  
5-14. RED Gain Data  
Function  
The external control equipment changes the RED Gain Data of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 04H DATA00 to DATA03 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: RED Gain Flag  
DATA02: RED Gain 1(Bias)  
01H  
01H  
D8H : -40  
:
FFH : -01  
00H : 0  
01H : +01  
:
1EH : +30  
D8H : -40  
:
DATA03: RED Gain 2(Drive)  
FFH : -01  
00H : 0  
01H : +01  
:
1EH : +30  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: RED Gain Flag  
01H  
01H  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 14 / 49  
Document Version [1.0]  
5-15. GREEN Gain Data  
Function  
The external control equipment changes the GREEN Gain Data of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 04H DATA00 to DATA03 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: GREEN Gain Flag  
01H  
02H  
DATA02: GREEN Gain1 (Bias)  
D8H: -40  
:
FFH: -01  
00H: 0  
01H: +01  
:
1EH: +30  
D8H : -40  
:
DATA03: GREEN Gain2(Drive)  
FFH: -01  
00H: 0  
01H: +01  
:
1EH: +30  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: GREEN Gain Flag  
01H  
02H  
5-16. BLUE Gain Data  
Function  
The external control equipment changes the BLUE Gain Data of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 04H DATA00 to DATA03 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: BLUE Gain Flag  
01H  
03H  
DATA02: BLUE Gain1 (Bias)  
D8H :-40  
:
FFH: -01  
00H: 0  
01H: +01  
:
1EH: +30  
D8H:-40  
:
DATA03: BLUE Gain2 (Drive)  
FFH: -01  
00H: 0  
01H: +01  
:
1EH: +30  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: BLUE Gain Flag  
01H  
03H  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 15 / 49  
Document Version [1.0]  
5-17. NR MODE Set  
Function  
The external control equipment sets the NR (Noise Reduction) mode of the plasma monitor.  
Transmission Data  
DFH 80H 60H C0H 01H DATA00 CKS  
DATA00: 01H: NR OFF  
02H: NR-1  
03H: NR-2  
04H: NR-3  
ACK  
7FH 60H 80H C0H 01H DATA00 CKS  
DATA00: 01H: NR OFF  
02H: NR-1  
03H: NR-2  
04H: NR-3  
5-18. BASS Gain Data  
Function  
The external control equipment changes the BASS gain data of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: BASS Gain Flag  
DATA02: BASS Gain  
05H  
03H  
F3H: -13  
:
FFH : -01  
00H: 0  
01H: +01  
:
0DH : +13  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: BASS Gain Flag  
05H  
03H  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 16 / 49  
Document Version [1.0]  
5-19. TREBLE Gain Data  
Function  
The external control equipment changes the TREBLE gain data of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA0 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: TREBLE Gain Flag  
DATA02: TREBLE Gain  
05H  
04H  
F3H: -13  
:
FFH: -01  
00H: 0  
01H: +01  
:
0DH: +13  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: TREBLE Gain Flag  
05H  
04H  
5-20. BALANCE Gain Data  
Function  
The external control equipment changes the BALANCE gain data of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: BALANCE Gain Flag  
DATA02: BALANCE Gain  
05H  
02H  
EAH: -22  
:
FFH: -01  
00H: 0  
01H: +01  
:
16H: +22  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER PICTURE Gain Flag  
05H  
DATA01: BALANCE Gain Flag  
02H  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 17 / 49  
Document Version [1.0]  
5-21. SCREEN MODE Select  
Function  
The external control equipment switches the screen mode of the plasma monitor.  
Transmission Data  
DFH 80H 60H 51H 01H DATA00 CKS  
DATA00 02H: STADIUM  
03H: ZOOM  
04H: NORMAL  
05H: ANAMORHIC (FULL)  
06H: REAL  
08H: UNDERSCAN  
09H: 14:9  
0AH: 2.35:1  
ACK  
7FH 60H 80H 51H 01H DATA00 CKS  
DATA00 02H: STADIUM  
03H: ZOOM  
04H: NORMAL  
05H: ANAMORHIC(FULL)  
06H: REAL  
08H: UNDERSCAN  
09H: 14:9  
0AH: 2.35:1  
*If it selects DATA00 “08: UNDERSCAN”, it need to set No.78 UNDERSCAN setting ON.  
5-22. V. POSITION Gain Data  
Function  
The external control equipment changes the V. POSITION gain data of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: V.POSITION Gain Flag  
DATA02: V.POSITION Gain  
03H  
01H  
C0H: -64  
:
FFH: -01  
00H: 0  
01H: +01  
:
40H: +64  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER PICTURE Gain Flag  
03H  
DATA01: V.POSITION Gain Flag  
01H  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 18 / 49  
Document Version [1.0]  
5-23. H. POSITION Gain Data  
Function  
The external control equipment changes the H. POSITION gain data of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: H.POSITION Gain Flag  
DATA02: H.POSITION Gain  
03H  
02H  
80H: -128  
:
FFH: -01  
00H: 0  
01H: +01  
:
7FH: +127  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER PICTURE Gain Flag  
03H  
DATA01: H.POSITION Gain Flag  
02H  
5-24. V. HEIGHT Gain Data  
Function  
The external control equipment changes the V-HEIGHT gain data of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: V-HEIGHT Gain Flag  
DATA02: V-HEIGHT Gain  
03H  
07H  
00H: 0  
:
40H: +64  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER PICTURE Gain Flag  
03H  
DATA01: V-HEIGHT Gain Flag  
07H  
5-25. H. WIDTH Gain Data  
Function  
The external control equipment changes the H-WIDTH gain data of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: H-WIDTH Gain Flag  
DATA02: H-WIDTH Gain  
03H  
08H  
00H: 0  
:
40H: +64  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER PICTURE Gain Flag  
03H  
DATA01: H-WIDTH Gain Flag  
08H  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 19 / 49  
Document Version [1.0]  
5-26. AUTO PICTURE Select  
Function  
The external control equipment switches on or off the AUTO PICTURE of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: AUTO PICTURE Select Flag  
DATA02 00H: ON  
03H  
09H  
01H: OFF  
ACK  
7FH 60H 80H 7FH 03H DATA00 DATA01 DATA02 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: AUTO PICTURE Select Flag  
DATA02 00H: ON  
03H  
09H  
01H: OFF  
5-27. PHASE (FINE PICTURE) Gain Data  
Function  
The external control equipment changes the PHASE gain data (Phase) of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: PHASE Gain Flag  
DATA02: PHASE Gain  
03H  
03H  
00H: 0  
:
40H: +64 :  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER PICTURE Gain Flag  
03H  
DATA01: PHASE Gain Flag  
03H  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 20 / 49  
Document Version [1.0]  
5-28. CLOCK (PICTURE ADJUST) Gain Data  
Function  
The external control equipment changes the CLOCK gain data (ratio of frequency division) of the plasma monitor.  
Transmission Data  
DFH 80H 60H 7FH 03H DATA00 DATA01 DATA02 CKS  
DATA00: USER PICTURE Gain Flag  
DATA01: CLOCK Gain Flag  
DATA02: CLOCK Gain  
03H  
04H  
C0H: -64  
:
FFH: -01  
00H: 0  
01H: +01  
:
40H: +64  
ACK  
7FH 60H 80H 7FH 02H DATA00 DATA01 CKS  
DATA00: USER PICTURE Gain Flag  
03H  
DATA01: CLOCK Gain Flag  
04H  
5-29. OSM ADJ. POSITION Data  
Function  
The external control equipment sets the position of the OSM menu of the plasma monitor.  
Transmission Data  
DFH 80H 60H 1AH 02H DATA00 DATA01 CKS  
DATA00: OSM ADJ. Gain Flag  
DATA01  
02H  
01H: 1(TOP LEFT)  
02H: 2(TOP CENTER)  
03H: 3(TOP RIGHT)  
04H: 4(BOTTOM LEFT)  
05H: 5(BOTTOM CENTER)  
06H: 6(BOTTOM RIGHT)  
ACK  
7FH 60H 80H 1AH 01H DATA00 CKS  
DATA00: OSM ADJ. Gain Flag  
02H  
5-30. POWER MGT Select  
Function  
The external control equipment switches on or off the POWER MANAGEMENT of the plasma monitor.  
Transmission Data  
DFH 80H 60H 1AH 02H DATA00 DATA01 CKS  
DATA00: POWER MGT Select  
DATA01  
03H  
01H: ON  
02H: OFF  
ACK  
7FH 60H 80H 1AH 02H DATA00 DATA01 CKS  
DATA00: POWER MGT Select  
DATA01  
03H  
01H: ON  
02H: OFF  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 21 / 49  
Document Version [1.0]  
5-31. GRAY LEVEL Set  
Function  
The external control equipment sets the GRAY LEVEL of the plasma monitor.  
Transmission Data  
DFH 80H 60H C6H 01H DATA00 CKS  
DATA00: GRAY LEVEL  
00H: 0  
:
0FH: 15  
ACK  
7FH 60H 80H C6H 01H DATA00 CKS  
DATA00: GRAY LEVEL  
00H: 0  
:
0FH: 15  
5-32. CINEMA MODE Set  
Function  
The external control equipment switches on or off the CINEMA MODE of the plasma monitor.  
Transmission Data  
DFH 80H 60H C1H 01H DATA00 CKS  
DATA00: CINEMA MODE Set  
ACK  
01H: ON  
02H: OFF  
7FH 60H 80H C1H 01H DATA00 CKS  
DATA00: CINEMA MODE Set  
01H: ON  
02H: OFF  
5-33. LONG LIFE Set (PDP SAVER Set)  
Function  
The external control equipment sets the PLE, ORBITER, and INVERSE (inverse of image brightness) or WHITE of the plasma  
monitor.  
Transmission Data  
DFH 80H 60H 6BH 03H DATA00 DATA01 DATA02 CKS  
DATA00: PLE  
01H: 100% (AUTO)  
02H: 75% (LOCK1)  
03H: 50% (LOCK2)  
04H: 25% (LOCK3)  
01H: INVERSE  
02H: OFF  
DATA01: INVERSE/WHITE  
03H: WHITE  
DATA02: ORBITER (PICTURE SHIFT)  
01H: AUTO1  
02H: OFF  
03H: AUTO2  
ACK  
The plasma monitor returns the following ACK when setting the PLE, ORBITER, and INVERSE (inverse of image brightness) or  
WHITE:  
3FH 60H 80H 6BH 00H CKS  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 22 / 49  
Document Version [1.0]  
5-34. SCREEN WIPER Set  
Function  
The external control equipment sets the SCREEN WIPER of the plasma monitor.  
Transmission Data  
DFH 80H 60H C8H 04H DATA00 to DATA03 CKS  
DATA00: SCREEN WIPER  
00H: No operation  
01H: ON  
02H: OFF  
DATA01:  
DATA02:  
DATA03:  
00H: fixed  
FFH: fixed  
01H: fixed  
ACK  
3FH 60H 80H C8H 00H CKS  
5-35. ALL RESET  
Function  
The external control equipment resets the user adjustment of the plasma monitor.  
Transmission Data  
1FH 80H 60H 54H 00H CKS  
ACK  
3FH 60H 80H 54H 00H CKS  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 23 / 49  
Document Version [1.0]  
5-36. Audio Select Set  
Function  
The external control equipment sets combinations of audio and video inputs for the plasma monitor.  
Transmission Data  
DFH 80H 60H 70H 02H DATA00 DATA01 CKS  
DATA00: AUDIO INPUT  
DATA01: VISUAL INPUT  
01H: AUDIO1  
02H: AUDIO2  
03H: AUDIO3  
04H: DVD/HD3 INPUT1  
05H: DVD/HD4 INPUT1  
01H: VIDEO1  
02H: VIDEO2  
05H: DVD/HD1  
06H: DVD/HD2  
07H: PC/RGB  
0EH: DVD/HD 3  
1AH: DVD/HD 4  
20H: DVD/HD INPUT HDMI  
21H: DVD/HD INPUT AUDIO INPUT1-3  
ACK  
The plasma monitor returns the following ACK when the input is switched.  
3FH 60H 80H 70H 00H CKS  
* The plasma monitor returns “Not Available” when selecting the video input same as the one set at one of the AUDIO 1 to 3.  
Example:  
The plasma monitor returns “Not Available” when selecting the VIDEO1 for AUDIO2 or VIDEO2 after VIDEO1 has been set to  
AUDIO1.  
* When selected 04H or 05H of Data00,it can be selected 20H or 21H of Data01.  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 24 / 49  
Document Version [1.0]  
5-37. RGB Select  
Function  
The external control equipment sets the RGB SELECT of the plasma monitor.  
Transmission Data  
DFH 80H 60H 8BH 01H DATA00 CKS  
DATA00  
01H: AUTO  
11H: type1  
12H: type2  
13H: type3  
14H: type4  
15H: type5  
16H: type6  
17H: type7  
18H: type8  
19H: type9  
1AH: type10  
ACK  
7FH 60H 80H 8BH 01H DATA00 CKS  
DATA00  
01H: AUTO  
11H: type1  
12H: type2  
13H: type3  
14H: type4  
15H: type5  
16H: type6  
17H: type7  
18H: type8  
19H: type9  
1AH: type10  
Correspond to Analog RGB.  
The type is following as below.  
HD_MODE1 :10KHz 以下  
HD_MODE2 :14.0~20.9KHz  
HD_MODE3 :21.0~26.4KHz  
HD_MODE4 :26.5~32.7KHz  
HD_MODE5 :32.8~36.6KHz  
HD_MODE6 :36.7~38.5KHz  
HD_MODE7 :38.6~45.9KHz  
HD_MODE8 :46.0~49.0KHz  
HD_MODE9 :49.1~55.0KHz  
HD_MODE10:55.1~76.9KHz  
HD_MODE11:77.0~83.5KHz  
HD_MODE12:83.6~115.0KHz  
HD_MODE13: other  
VD_MODE1:15.00~24.50Hz  
VD_MODE2:24.60~27.50Hz  
VD_MODE3:27.60~40.00Hz  
VD_MODE4:40.01~48.50Hz  
VD_MODE5:48.60~55.00Hz  
VD_MODE6:55.01~61.76Hz  
VD_MODE7:61.77~73.50Hz  
VD_MODE8:73.51~79.50Hz  
VD_MODE9:79.51~92.50Hz  
VD_MODE10:92.51~110.00Hz  
VD_MODE11:110.01~131.00Hz  
VD_MODE12: other  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 25 / 49  
Document Version [1.0]  
Type1  
848x480  
@50  
Type2  
640x480  
@50  
Type3  
Type4  
Type5  
Type6  
Type7  
Type8  
Type9  
Type10  
H mode:3  
V mode:5  
H mode:4  
V mode:5  
H mode:4  
V mode:6  
H mode:4  
V mode:7  
768×576  
@50  
1920×1080  
@50  
640×480  
@60_1  
720×400  
@70  
852×480  
@60  
848×480  
@60  
640×480  
@60_2  
640×480  
@60_3  
720×350  
@70  
1920×1035  
@60  
(1035I)  
1920×1080  
@60  
H mode:5  
V mode:6  
800×600  
@56  
(1080A)  
1920×1080  
@60  
(1080B)  
1280x768  
@60  
H mode:7  
V mode:6  
1280×768@5  
6.2  
1280×720  
@60  
1024*768  
@60_2  
H mode:8  
V mode:6  
1024×768  
@60_1  
1360×765  
@60  
1376×768  
@60  
1280×768  
@60_1  
1280×768  
@60_2  
Only DVI(PC)  
1152x864  
@60_1  
1024×768  
@60  
H mode:9  
V mode:6  
1280*800  
@60  
1280*854  
@60  
1152x864  
@60_2  
H mode10  
1080P  
1250P  
@50  
1920×1080  
@50  
V mode5  
@50  
1080P  
@60  
1366×768  
60  
1920×1080  
@60  
H mode10  
1280×1024  
@60  
1400×1050  
@60_1  
1920*1200  
@60  
1920*1200RB  
@60  
1600×1200  
@60  
1400x1050  
@60_2  
1680*1050  
@60  
V mode6  
H mode10  
1024×768  
@70  
1024x768  
@72  
1280x768  
@70  
1280x768  
@72  
“1920*1200RB@60” is Reduce blanking signal.  
Vmode7  
H mode10  
1024×768  
@75  
1152×864  
V mode8  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 26 / 49  
Document Version [1.0]  
5-38. HD Select  
Function  
The external control equipment sets the HD SELECT of the plasma monitor.  
Transmission Data  
DFH 80H 60H 8AH 01H DATA00 CKS  
DATA00  
01H: 1035I  
02H: 540P (1080A)  
03H: 1080I (1080B)  
ACK  
7FH 60H 80H 8AH 01H DATA00 CKS  
DATA00  
01H: 1035I  
02H: 540P (1080A)  
03H: 1080I (1080B)  
5-39. LANGUAGE Select  
Function  
The external control equipment sets the LANGUAGE SELECT of the plasma monitor.  
Transmission Data  
DFH 80H 60H 5BH 01H DATA00 CKS  
DATA00: 01H: ENGLISH  
02H: GERMAN  
03H: FRENCH  
04H: SPANISH  
05H: ITALIAN  
06H: SWEDISH  
0BH: RUSSIAN  
0DH: PORTUGUESE  
ACK  
7FH 60H 80H 5BH 01H DATA00 CKS  
DATA00: 01H: ENGLISH  
02H: GERMAN  
03H: FRENCH  
04H: SPANISH  
05H: ITALIAN  
06H: SWEDISH  
0BH: RUSSIAN  
0DH: PORTUGUESE  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 27 / 49  
Document Version [1.0]  
5-40. COLOR SYSTEM Select  
Function  
The external control equipment sets the COLOR SYSTEM of the plasma monitor.  
Transmission Data  
DFH 80H 60H 5CH 01H DATA00 CKS  
DATA00: 01H: 3.58NTSC  
02H: 4.43NTSC  
03H: PAL  
04H: SECAM  
0AH: AUTO  
0BH: PAL60  
0DH: PAL-M  
0EH: PAL-N  
ACK  
7FH 60H 80H 5CH 01H DATA00 CKS  
DATA00: 01H: 3.58NTSC  
02H: 4.43NTSC  
03H: PAL  
04H: SECAM  
0AH: AUTO  
0BH: PAL60  
0DH: PAL-M  
0EH: PAL-N  
5-41. FREQUENCY Request (SIGNAL INFORMATION)  
Function  
The external control equipment inquires the Horizontal frequency, Vertical frequency, Horizontal sync polarity, Vertical sync polarity,  
Mode, and Resolution of the plasma monitor.  
Transmission Data  
1FH 80H 60H 26H 00H CKS  
ACK  
7FH 60H 80H 26H 0BH DATA00 to DATA0A CKS  
Horizontal frequency  
DATA00: Integer part  
00H: 0 (No signal: 00H)  
:
FFH: 255  
DATA01: One decimal place  
00H: 0 (No signal: 00H)  
:
09H: 9  
Vertical frequency  
DATA02: Integer part  
00H: 0 (No signal: 00H)  
:
FFH: 255  
DATA03: One decimal place  
00H: 0 (No signal: 00H)  
:
09H: 9  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 28 / 49  
Document Version [1.0]  
Horizontal sync polarity  
DATA04  
00H:  
-
01H: Positive  
02H: Negative  
Vertical sync polarity  
DATA05 00H:  
-
01H: Positive  
02H: Negative  
MODE  
DATA06  
00H  
: No signal  
-
01H to 80H  
81H  
: RGB signal  
Identification number of PC mode  
: Video signal  
3.58NTSC  
4.43NTSC  
PAL  
82H  
:
:
:
:
:
:
:
:
83H  
84H  
PAL-M  
PAL-N  
PAL60  
SECAM  
B/W60  
B/W50  
480I  
85H  
86H  
87H  
88H  
89H  
A0H : HD/DVD/DTV signal  
A1H  
A2H  
A3H  
A4H  
A5H  
A6H  
:
480P  
:
:
:
:
:
576I  
576P  
720P  
1035I  
1080I  
RESOLUTION  
DATA07: Dots (Low-order byte)  
DATA08: Dots (High-order byte)  
DATA09: Lines (Low-order byte)  
DATA10: Lines (High-order byte)  
00H: 0 (No signal: 00H)  
:
FFH 255  
00H: 257 (No signal: 00H)  
:
FFH  
00H: 0 (No signal: 00H)  
:
FFH: 255  
00H: 257 (No signal: 00H)  
:
FFH  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 29 / 49  
Document Version [1.0]  
5-42. Input MODE Request  
Function  
The display returns the current input information by the external control equipment’s request.  
Transmission Data  
1FH 80H 60H 41H 00H CKS  
ACK  
7FH 60H 80H 41H 01H DATA00 CKS  
DATA00: Input Select  
01H: Video1  
02H: Video2  
05H: DVD/HD1  
06H: DVD/HD2  
07H: PC/RGB  
0EH: DVD/HD3 (HDMI)  
1AH: DVD/HD4 (HDMI)  
5-43. VIDEO ADJ. Request  
Function  
The display returns the video adjustments information by the external control equipment’s request.  
Transmission Data  
1FH 80H 60H 45H 00H CKS  
ACK  
7FH 60H 80H 45H 0CH DATA00 to DATA0B CKS  
DATA00: RED Gain (Bias)  
DATA01: GREEN Gain (Bias)  
DATA02: BLUE Gain (Bias)  
D8H: -40  
:
FFH: -01  
00H: 0  
01H: +01  
:
1EH: +30  
D8H: -40  
:
FFH: -01  
00H: 0  
01H: +01  
:
1EH: +30  
D8H: -40  
:
FFH: -01  
00H: 0  
01H: +01  
:
1EH: +30  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 30 / 49  
Document Version [1.0]  
DATA03: COLOR Gain  
E0H: -32  
:
FFH: -01  
00H: 0  
01H: +01  
:
20H: +32  
DATA04: TINT Gain  
E0H: -32  
:
FFH: -01  
00H: 0  
01H: +01  
:
20H: +32  
DATA05: SHARPNESS Gain  
F0H: -16  
:
FFH: -01  
00H: 0  
01H: +01  
:
10H: +16  
DATA06: CONTRAST Gain  
CCH: -52  
:
FFH: -01  
00H: 0  
01H: +01  
:
14H: +20  
DATA07: BRIGHT Gain  
E0H: -32  
:
FFH: -01  
00H: 0  
01H: +01  
:
20H: +32  
DATA08: RED Gain (Drive)  
D8H: -40  
:
FFH: -01  
00H: 0  
01H: +01  
:
1EH: +30  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 31 / 49  
Document Version [1.0]  
DATA09: GREEN Gain (Drive)  
D8H: -40  
:
FFH: -01  
00H: 0  
01H: +01  
:
1EH: +30  
DATA0A: BLUE Gain (Drive)  
D8H: -40  
:
FFH: -01  
00H: 0  
01H: +01  
:
1EH: +30  
DATA0B: COLOR TEMP SELECT  
00H: low  
01H: middle  
02H: high  
03H: middle low  
5-44. Audio Select Request  
Function  
The external control equipment inquires the current combinations of audio and video inputs for the plasma monitor.  
Transmission Data  
1FH 80H 60H 6FH 00H CKS  
ACK  
The plasma monitor returns the following ACK:  
7FH 60H 80H 6FH 03H DATA00 DATA01 DATA02 CKS  
DATA00: AUDIO1  
01H-0CH: VISUAL INPUT DATA  
DATA01: AUDIO2  
01H-0CH: VISUAL INPUT DATA  
DATA02: AUDIO3  
01H-0CH: VISUAL INPUT DATA  
<VISUAL INPUT DATA>  
01H: VIDEO1  
02H: VIDEO2  
05H: DVD/HD1  
06H: DVD/HD2  
07H: PC/RGB  
0EH: DVD/HD3  
1AH: DVD/HD4  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 32 / 49  
Document Version [1.0]  
5-45. Failure Mode Request  
Function  
The external control equipment inquires the detection of failures of the plasma monitor.  
Transmission Data  
1FH 80H 60H 3FH 00H CKS  
ACK  
The plasma monitor returns the following ACK:  
7FH 60H 80H 3FH 02H DATA00 DATA01 CKS  
DATA00: FAILURE MODE 1  
Bit 0: PDP MODULE  
0: Abnormal  
1: Normal  
Bit 1: 1: fixed (backup)  
Bit 2: TEMPERATURE  
0: Abnormal  
1: Normal  
Bit 3: FAN  
0: Abnormal  
1: Normal  
Bit 4: TEMPERATURE SENSOR  
0: Abnormal  
1: Normal  
Bit 5: 1: fixed (backup)  
Bit 6: 1: fixed (backup)  
Bit 7: 1: fixed (backup)  
DATA01: FAILURE MODE 2  
Bit 0-7: 1: fixed (backup)  
Note: When 42 inch, “FAN” of DATA00-Bit3 is fixed “1”.  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 33 / 49  
Document Version [1.0]  
5-46. MODEL NAME Request  
Function  
The external control equipment inquires the product code of the plasma monitor.  
Transmission Data  
1FH 80H 60H 17H 00H CKS  
ACK  
The plasma monitor returns the following ACK:  
7FH 60H 80H 17H 0CH DATA00 to DATA11 CKS  
DATA00: 1st character of the product code  
DATA01: 2nd character of the product code  
:
DATA11: 12th character of the product code  
Received data  
00H-09H : 0-9  
80H  
81H  
82H  
83H  
84H  
85H  
86H  
87H  
96H  
: - (Hyphen)  
: +  
:
: /  
: (  
: )  
: .  
: ‘  
:
Blank  
A
B
C
D
E
F
G
H
I
J
10H-29H  
: A-Z  
Corresponding  
character  
Received data (H) 10 11 12 13 14 15 16 17 18 19  
Corresponding  
character  
K
L
M
N
O
P
Q
R
S
T
Received data (H) 1A 1B 1C 1D 1E 1F 20 21 22 23  
Corresponding  
character  
U
V
W
X
Y
Z
Received data (H) 24 25 26 27 28 29  
If there are fewer than 12 characters in the product code, product code would be padded right with blanks.  
Example: If the product code of your plasma monitor is “PX-50XR5A”, the returned codes would be as follows.  
DATA00:1FH, DATA01:27H, DATA02:80H, DATA03:05H, DATA04:00H, DATA05:27H, DATA06:21H, DATA07:05H,  
DATA08:10H, DATA09:96H, DATA10:96H, DATA11:96H  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 34 / 49  
Document Version [1.0]  
5-47. LOW TONE (50inch only)  
Function  
The external control equipment sets the Low toned of the plasma monitor.  
Transmission Data  
DFH 80H 60H 0CH 01H DATA00 CKS  
DATA00:  
ACK  
01H: Mode1  
02H: Mode2  
7FH 60H 80H 0CH 01H DATA00 CKS  
DATA00:  
01H: Mode1  
02H: Mode2  
5-48. COLOR TUNE  
Function  
External control equipment can adjust RGB each color which a plasma monitor wants to emphasize.  
Transmission Data  
DFH 80H 60H 0DH 07H DATA00 to DATA06 CKS  
DATA00: RED  
00H: -32  
:
20H: 0  
:
40H: +32  
DATA01: GREEN  
DATA02: BLUE  
00H: -32  
:
20H: 0  
:
40H: +32  
00H: -32  
:
20H: 0  
:
40H: +32  
DATA03: YELLOW  
DATA04: MAZENTA  
DATA05: CYAN  
00H: -32  
:
20H: 0  
:
40H: +32  
00H: -32  
:
20H: 0  
:
40H: +32  
00H: -32  
:
20H: 0  
:
40H: +32  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 35 / 49  
Document Version [1.0]  
DATA06: RESET  
00H: OFF  
01H: ON  
ACK  
7FH 60H 80H 0DH 00H CKS  
5-49. GAMMA GAIN Data  
Function  
External control apparatus changes Gamma of a plasma monitor.  
Transmission Data  
DFH 80H 60H 13H 02H DATA00 DATA01 CKS  
DATA00: GAMMA FLAG  
DATA01: GAMMA  
01H: Gamma change  
00H: 1(GAMMA2.1)  
01H: 2(GAMMA2.2)  
02H: 3(GAMMA2.3)  
03H: 4(GAMMA2.4)  
ACK  
7FH 60H 80H 13H 01H DATA00 CKS  
DATA00: GAMMA FLAG  
01H: Gamma change  
5-50. Running Sense  
Function  
External control apparatus grasps the power supply state of a plasma monitor.  
A plasma monitor is made to recognize connection of PC CONTROL.  
Transmission Data  
1FH 80H 60H 88H 00H CKS  
ACK  
7FH 60H 80H 88H 01H DATA CKS  
DATA: Bit0: Connect Condition  
0: No connection  
1: Connected  
Bit1 0: Fixed  
1:-  
Bit2: Power Status  
0: POWER ON  
1: POWER OFF (STANBY)  
Bit3 0: Fixed  
Bit4 0: Fixed  
Bit5 0: Fixed  
Bit6 0: Fixed  
Bit7 0: Fixed  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 36 / 49  
Document Version [1.0]  
5-51. OSM ORBITER  
Function  
In order to decrease printing of a screen by OSM display, whenever it displays OSM, shift operation of the OSM is carried out.  
Transmission Data  
DFH 80H 60H 5FH 01H DATA00 CKS  
DATA00  
ACK  
01H: ORBITER ON  
02H: ORBITER OFF  
7FH 60H 80H 5FH 01H DATA00 CKS  
DATA00  
01H: ORBITER ON  
02H: ORBITER OFF  
5-52. Input Skip  
Function  
In a monitor's key "an input change", when there is no signal, it flies and shifts to the following channel.  
Transmission Data  
DFH 80H 60H 61H 01H DATA00 CKS  
DATA00  
ACK  
01H: ON  
02H: OFF  
7FH 60H 80H 61H 01H DATA00 CKS  
DATA00  
01H: ON  
02H: OFF  
5-53. SERIAL No. Request  
Function  
External control apparatus read the serial number of the set recorded by EEPROM of a plasma display.  
Transmission Data  
1FH 80H 60H 15H 00H CKS  
ACK  
7FH 60H 80H 15H 0CH DATA00 to DATA11 CKS  
Even DATA00-DATA11 is set up as follows.  
Setting value  
00H-09H  
96H  
:
:
0 - 9  
Blank  
10H-29H  
:
A-Z of Alphabet  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 37 / 49  
Document Version [1.0]  
5-54. S1/S2 SELECT  
Function  
External control apparatus sets up the S1/S2 detection of a plasma monitor.  
Transmission Data  
DFH 80H 60H 89H 01H DATA00 CKS  
DATA00  
01H: AUTO  
02H: OFF  
ACK  
7FH 60H 80H 89H 01H DATA00 CKS  
DATA00  
01H: AUTO  
02H: OFF  
5-55. SOFT FOCUS  
Function  
External control apparatus sets up the Soft Focus of a plasma monitor.  
Transmission Data  
DFH 80H 60H 65H 01H DATA00 CKS  
DATA00 01H: OFF  
02H: LEVEL1  
03H: LEVEL2  
04H: LEVEL3  
05H: LEVEL4  
ACK  
7FH 60H 80H 65H 01H DATA00 CKS  
DATA00 01H: OFF  
02H: LEVEL1  
03H: LEVEL2  
04H: LEVEL3  
05H: LEVEL4  
5-56. BLACK LEVEL SELECT  
Function  
External control apparatus sets up the black level (digital signal level) of a plasma monitor.  
Transmission Data  
DFH 80H 60H 8FH 01H DATA00 CKS  
DATA00  
01H: LOW  
02H: HIGH  
ACK  
7FH 60H 80H 8FH 01H DATA00 CKS  
DATA00 01H: LOW  
02H: HIGH  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 38 / 49  
Document Version [1.0]  
5-57. MULTI (SPRIT) SCREEN Select  
Function  
External control apparatus selects a screen mode from alternatives mentioned below, such as single mode, side by side,  
picture in picture, etc., of Plasma Monitor.  
Transmission Data  
DFH 80H 60H 07H 01H DATA00 CKS  
DATA00: 00H: Single Screen  
01H: Side by Side 1 (Same Size Screen)  
02H: Side by Side 2R (Left Screen smaller)  
03H: Picture in Picture 1 (sub screen Bottom Left) with size1  
04H: Picturein Picture 2(sub screen Bottom Right) with size1  
05H: Side by Side 2L (Left Screen Bigger)  
06H: Picturein Picture 1(sub screen Bottom Left) with size2  
07H: Picturein Picture 2(sub screen Bottom Right) with size2  
08H: Picturein Picture 1(sub screen Bottom Left) with size3  
09H: Picturein Picture 2(sub screen Bottom Righ) with size3  
0AH: Picturein Picture 1(sub screen Bottom Left) with size4  
0BH: Picturein Picture 2(sub screen Bottom Right) withsize4  
41H: Picturein Picture 3(sub screen Top Right) with size1  
42H: Picturein Picture 3(sub screen Top Right) with size2  
43H: Picturein Picture 3(sub screen Top Right) with size3  
44H: Picturein Picture 3(sub screen Top Right) with size4  
45H: Picturein Picture 4(sub screen Top Left) with size1  
46H: Picturein Picture 4(sub screen Top Left) with size2  
47H: Picturein Picture 4(sub screen Top Left) with size3  
48H: Picturein Picture 4(sub screen Top Left) with size4  
49H: Side by Side 3 (Same Size Screen vertical expand)  
4AH: Side by Side 4R (Left Screen smaller vertical expand)  
4BH: Side by Side 4L (Left Screen Bigger vertical expand)  
10H: SWAP  
A0H: PIP OFF  
A1H: PIP ON  
In case of Side by Side mode;  
20H: Active Left  
21H: Active Right  
In case of Picture in picture mode;  
30H: Active Main  
31H: Active Sub  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 39 / 49  
Document Version [1.0]  
ACK  
7FH 60H 80H 07H 01H DATA00 CKS  
DATA00: 00H: Single Screen  
01H: Side by Side 1 (Same Size Screen)  
02H: Side by Side 2R (Left Screen smaller)  
03H: Picture in Picture 1 (sub screen Bottom Left) with size1  
04H: Picturein Picture 2(sub screen Bottom Right) with size1  
05H: Side by Side 2L (Left Screen Bigger)  
06H: Picturein Picture 1(sub screen Bottom Left) with size2  
07H: Picturein Picture 2(sub screen Bottom Right) with size2  
08H: Picturein Picture 1(sub screen Bottom Left) with size3  
09H: Picturein Picture 2(sub screen Bottom Righ) with size3  
0AH: Picturein Picture 1(sub screen Bottom Left) with size4  
0BH: Picturein Picture 2(sub screen Bottom Right) withsize4  
41H: Picturein Picture 3(sub screen Top Right) with size1  
42H: Picturein Picture 3(sub screen Top Right) with size2  
43H: Picturein Picture 3(sub screen Top Right) with size3  
44H: Picturein Picture 3(sub screen Top Right) with size4  
45H: Picturein Picture 4(sub screen Top Left) with size1  
46H: Picturein Picture 4(sub screen Top Left) with size2  
47H: Picturein Picture 4(sub screen Top Left) with size3  
48H: Picturein Picture 4(sub screen Top Left) with size4  
49H: Side by Side 3 (Same Size Screen vertical expand)  
4AH: Side by Side 4R (Left Screen smaller vertical expand)  
4BH: Side by Side 4L (Left Screen Bigger vertical expand)  
10H: SWAP  
A0H: PIP OFF  
A1H: PIP ON  
In case of Side by Side mode;  
20H: Active Left  
21H: Active Right  
In case of Picture in picture mode;  
30H: Active Main  
31H: Active Sub  
5-58. SUB PICTURE DETECT SELECT  
Function  
External control apparatus selects whether to display the sub picture or not, under picture in picture mode, of plasma monitor.  
Transmission Data  
DFH 80H 60H 7AH 01H DATA00 CKS  
DATA00 01H: OFF  
02H: AUTO  
ACK  
7FH 60H 80H 7AH 01H DATA00 CKS  
DATA00 01H: OFF  
02H: AUTO  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 40 / 49  
Document Version [1.0]  
5-59. ZOOM NAVIGATION SELECT  
Function  
External control apparatus selects digital zoom display of a plasma monitor, from the alternatives mentioned below;  
Transmission Data  
DFH 80H 60H 7BH 01H DATA00 CKS  
DATA00  
01H: OFF (single screen)  
02H: Side By Side (Left Screen smaller)  
03H: Picture in Picture1 (Sub Screen Bottom Left)  
04H: Picture in Picture2 (Sub Screen Bottom Right)  
05H: Picture in Picture3 (Sub Screen Top Right)  
06H: Picture in Picture4 (Sub Screen Top Left)  
ACK  
7FH 60H 80H 7BH 01H DATA00 CKS  
DATA00  
01H: OFF (single screen)  
02H: Side By Side2R (Left Screen smaller)  
03H: Picture in Picture1 (Sub Screen Bottom Left)  
04H: Picture in Picture2 (Sub Screen Bottom Right)  
05H: Picture in Picture3 (Sub Screen Top Right)  
06H: Picture in Picture4 (Sub Screen Top Left)  
5-60. PICTURE FREEZE SELECT  
Function  
External control apparatus selects the picture freeze function of a plasma monitor.  
Transmission Data  
DFH 80H 60H 7CH 01H DATA00 CKS  
DATA00  
01H: OFF (single screen)  
02H: Side By Side1 (Same Size Screen)  
03H: Picture in Picture1 (Sub Screen Bottom Left)  
04H: Picture in Picture2 (Sub Screen Bottom Right)  
05H: Picture in Picture3 (Sub Screen Top Right)  
06H: Picture in Picture4 (Sub Screen Top Left)  
07H: Side by Side 2 (Same Size Screen vertical expand)  
ACK  
7FH 60H 80H 7CH 01H DATA00 CKS  
DATA00  
01H: OFF (single screen)  
02H: Side By Side1 (Same Size Screen)  
03H: Picture in Picture1 (Sub Screen Bottom Left)  
04H: Picture in Picture2 (Sub Screen Bottom Right)  
05H: Picture in Picture3 (Sub Screen Top Right)  
06H: Picture in Picture4 (Sub Screen Top Left)  
07H: Side by Side2 (Same Size Screen vertical expand)  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 41 / 49  
Document Version [1.0]  
5-61. PICTURE FREEZE (Pause) Command  
Function  
External control apparatus sets picture freeze or remove picture freeze of a plasma monitor.  
Transmission Data  
DFH 80H 60H 7DH 01H DATA00 CKS  
DATA00  
01H: FREEZE  
02H: FREEZE OFF  
ACK  
7FH 60H 80H 7DH 01H DATA00 CKS  
DATA00  
01H: FREEZE  
02H: FREEZE OFF  
5-62. OSM CONTRAST SELECT  
Function  
External control apparatus selects the OSM contrast function of a plasma monitor.  
Transmission Data  
DFH 80H 60H 37H 01H DATA00 CKS  
DATA00  
01H: NORMAL  
02H: LOW  
ACK  
7FH 60H 80H 37H 01H DATA00 CKS  
DATA00  
01H: NORMAL  
02H: LOW  
5-63. CC (Closed caption) SELECT  
Function  
External control apparatus selects the Closed Caption function of a plasma monitor.  
Transmission Data  
DFH 80H 60H 3CH 01H DATA00 CKS  
DATA00  
00H: OFF  
01H: CC1 (closed caption1)  
02H: CC2 (closed caption2)  
03H: CC3 (closed caption3)  
04H: CC4 (closed caption4)  
05H: TEXT1  
06H: TEXT2  
07H: TEXT3  
08H: TEXT4  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 42 / 49  
Document Version [1.0]  
ACK  
7FH 60H 80H 3CH 01H DATA00 CKS  
DATA00  
00H: OFF  
01H: CC1 (closed caption1)  
02H: CC2 (closed caption2)  
03H: CC3 (closed caption3)  
04H: CC4 (closed caption4)  
05H: TEXT1  
06H: TEXT2  
07H: TEXT3  
08H: TEXT4  
5-64. CC (Closed caption) CONTRAST SELECT  
Function  
External control apparatus selects the Closed Caption Contrast function of a plasma monitor.  
Transmission Data  
DFH 80H 60H 3DH 01H DATA00 CKS  
DATA00  
01H: NORMAL  
02H: LOW  
ACK  
7FH 60H 80H 3DH 01H DATA00 CKS  
DATA00  
01H: NORMAL  
02H: LOW  
5-65. PICTURE MEMORY Select  
Function  
The external control equipment selects the Picture Memory function of a plasma monitor.  
Transmission Data  
DFH 80H 60H 38H 01H DATA00 CKS  
DATA00: MEMORY select  
00H: OFF  
01H: MEMORY1  
02H: MEMORY2  
03H: MEMORY3  
04H: MEMORY4  
05H: MEMORY5  
06H: MEMORY6  
ACK  
The plasma monitor returns the following ACK when the input is switched.  
7FH 60H 80H 38H 01H CKS  
DATA00:  
00H: OFF  
01H: MEMORY1  
02H: MEMORY2  
03H: MEMORY3  
04H: MEMORY4  
05H: MEMORY5  
06H: MEMORY6  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 43 / 49  
Document Version [1.0]  
5-66. PICTURE MEMORY Set  
Function  
The external control equipment ser and reset the Picture Memory function of a plasma monitor.  
Transmission Data  
DFH 80H 60H 25H 02H DATA00 DATA01 CKS  
DATA00:  
01H: SET  
02H: RESET  
DATA01: MEMORY select  
00H: OFF  
01H: MEMORY1  
02H: MEMORY2  
03H: MEMORY3  
04H: MEMORY4  
05H: MEMORY5  
06H: MEMORY6  
ACK  
The plasma monitor returns the following ACK when the input is switched.  
7FH 60H 80H 25H 01H CKS  
DATA00:  
01H: SET  
02H: RESET  
NOTE: When “PICTURE MEMORY” selects “OFF”, this command is no support.  
5-67. PICTURE MEMORY NOTE WRITE Set  
Function  
External control apparatus writes to NOTE of PICTURE MEMORY of a plasma display.  
Transmission Data  
DFH 80H 60H 2DH 0FH DATA00 to DATA14 CKS  
Even DATA00-DATA14 is set up as follows.  
Setting value  
00H-09H : 0 - 9  
80H  
81H  
82H  
83H  
84H  
85H  
86H  
87H  
96H  
: - (Hyphen)  
: +  
:
: /  
: (  
: )  
: .  
: ‘  
: Blank  
10H-29H: A-Z of Alphabet  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 44 / 49  
Document Version [1.0]  
Corresponding  
character  
A
B
C
D
E
F
G
H
I
J
Received data (H) 10 11 12 13 14 15 16 17 18 19  
Corresponding  
character  
K
L
M
N
O
P
Q
R
S
T
Received data (H) 1A 1B 1C 1D 1E 1F 20 21 22 23  
Corresponding  
character  
U
V
W
X
Y
Z
Received data (H) 24 25 26 27 28 29  
ACK  
3FH 60H 80H 2DH 00H CKS  
NOTE)  
Please select the memory you like to write by “68.PICTURE MEMORY Select” before setting “PICTURE  
MEMORY NOTE WRITE”  
5-68. SET UP LEVEL SELECT  
Function  
External control apparatus selects the Set up level function of a plasma monitor.  
Transmission Data  
DFH 80H 60H 35H 01H DATA00 CKS  
DATA00  
01H: 0%  
02H: 3.75%  
03H: 7.5%  
ACK  
7FH 60H 80H 35H 01H DATA00 CKS  
DATA00  
01H: 0%  
02H: 3.75%  
03H: 7.5%  
5-69. BACK GROUND SELECT  
Function  
External control apparatus selects the Back ground function of a plasma monitor.  
Transmission Data  
DFH 80H 60H 36H 01H DATA00 CKS  
DATA00  
01H: Black  
02H: Gray  
ACK  
7FH 60H 80H 36H 01H DATA00 CKS  
DATA00  
01H: Black  
02H: Gray  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 45 / 49  
Document Version [1.0]  
5-70. PDP SAVER AUTO Select  
Function  
External control apparatus selects automatic or manual of the PDP saver function of a plasma monitor.  
Transmission Data  
DFH 80H 60H 2CH 01H DATA00 CKS  
DATA00  
01H: MANUAL  
02H: AUTO  
ACK  
7FH 60H 80H 2CH 01H DATA00 CKS  
DATA00  
01H: MANUAL  
02H: AUTO  
5-71. Audio HDMI Request  
Function  
The external control equipment inquires the current combinations of HDMI audio inputs for the plasma monitor.  
Transmission Data  
1FH 80H 60H 3AH 00H CKS  
ACK  
The plasma monitor returns the following ACK:  
7FH 60H 80H 6FH 02H DATA00 DATA01 CKS  
DATA00: DVD/HD3 INPUT  
01H: HDMI  
02H: AUDIO INPUT1-3  
01H: HDMI  
DATA01: DVD/HD4 INPUT  
02H: AUDIO INPUT1-3  
5-72. POWER ON MODE (INPUT)  
Function  
Power-on modes (input) are set up.  
Transmission Data  
DFH 80H 60H 63H 04H DATA00 to DATA03 CKS  
DATA00: Power ON mode(INPUT)  
00H: LAST  
01H: Video1  
02H: Video2  
05H: DVD/HD1  
06H: DVD/HD2  
07H: PC/RGB  
0EH: DVD/HD3 (HDMI)  
1AH: DVD/HD4 (HDMI)  
01H  
DATA01: FIX  
DATA02: FIX  
DATA03: FIX  
00H  
00H  
ACK  
7FH 60H 80H 63H 00H CKS  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 46 / 49  
Document Version [1.0]  
5-73. POWER ON MODE (VOLUME)  
Function  
Power-on modes (Volume) are set up.  
Transmission Data  
DFH 80H 60H 0FH 01H DATA00 CKS  
DATA00: Power ON mode (VOLUME)  
A0H: LAST  
00H: volume0  
:
2A H: volume42  
ACK  
7FH 60H 80H 0FH 00H CKS  
5-74. 74. SUB PICTURE RATE set  
Function  
Sub screen rate of PIP are set up.  
Transmission Data  
DFH 80H 60H DAH 02H DATA00 DATA01 CKS  
DATA00: Sub screen rate Gain flag  
DATA01: Sub screen rate Gain  
01H  
00H: 20%  
01H: 30%  
02H: 40%  
03H: 50%  
04H: 60%  
05H: 70%  
06H: 80%  
07H: 90%  
08H: 100%  
00H: NORMAL  
01H: FADE  
DATA02: FADE  
ACK  
7FH 60H 80H DAH 01H DATA00 CKS  
DATA00: Sub screen rate Gain flag  
01H  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 47 / 49  
Document Version [1.0]  
5-75. MULTI (SPRIT) SCREEN POWER ON MODE SET  
Function  
Power-on modes (Input) for sprit screen are set up.  
Transmission Data  
DFH 80H 60H 33H 04H DATA00 to DATA03 CKS  
DATA00 POWER ON MODE 01H: LAST  
02H: MULTI  
DATA01 MULTI MODE  
01H: Side By Side1 (Same Size Screen)  
02H: Side By Side2 (Left Screen Smaller)  
03H: Side By Side2 (Left ScreenBigger)  
04H: Picture in Picture1 (Sub screen bottom left)  
05H: Picture in Picture2 (Sub screen bottom right)  
06H: Picture in Picture3 (Sub screen top right)  
07H: Picture in Picture4 (Sub screen top left)  
DATA02 INPUT1 (Left or main)  
01H: Video1  
02H: Video2  
05H: DVD/HD1  
06H: DVD/HD2  
07H: PC/RGB  
0EH: DVD/HD3  
1AH: DVD/HD4  
DATA03 INPUT2 (Right or Sub)  
01H: Video1  
01H: Video1  
02H: Video2  
05H: DVD/HD1  
06H: DVD/HD2  
07H: PC/RGB  
0EH: DVD/HD3  
1AH: DVD/HD4  
ACK  
7FH 0H 80H 33H 00H CKS  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 48 / 49  
Document Version [1.0]  
5-76. REMOTE CODE SETTING  
Function  
Remotecontroler codes are set.  
Transmission Data  
DFH 80H 60H 2BH 01H DATA00 CKS  
DATA00  
00H: ALL  
01H: CODE1  
02H: CODE2  
03H: CODE3  
04H: CODE4  
ACK  
7FH 60H 80H 2BH 01H DATA00 CKS  
DATA00  
00H: ALL  
01H: CODE1  
02H: CODE2  
03H: CODE3  
04H: CODE4  
5-77. VOLUME Gain Data REQUEST  
Function  
The external control equipment inquires the volume gain for Plasma diaplay.  
Transmission Data  
1FH 80H 60H 0EH 00H CKS  
ACK  
DFH 60H 80H 0EH 01H DATA00 CKS  
DATA00: VOLUME Gain  
: 00H~2AH  
(00H: 00FH:1510H:161FH31・・・2AH:42)  
: FFH: MUTE  
5-78. UNDER SCAN SETTING  
Function  
Under scan are set up.  
Transmission Data  
DFH 80H 60H 22H 01H DATA00 CKS  
DATA00:  
00H  
OFF  
01H  
ON  
ACK  
7FH 60H 80H 22H 01H DATA00 CKS  
DATA00:  
00H  
OFF  
01H  
ON  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PDxx01  
RS-232C Control Specification  
Page: 49 / 49  
Document Version [1.0]  
6. Revision history  
Rev.  
Date  
Owner  
Change description  
1.0 12/06/06 Marantz America, Inc.  
Issued Revision1.0  
Company Restricted  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Krell Industries Stereo Receiver KPS 30i User Manual
Linear Vacuum Cleaner Central Vacuum User Manual
Linksys Network Card AM300 User Manual
Linn Speaker AKURATE Loudspeaker System User Manual
Lowrance electronic Fish Finder LMS 480DF User Manual
LST Smoke Alarm AW 55000 420 User Manual
Magnavox Clock Radio AJ3930 User Manual
Makita Saw JV2000 User Manual
Maxtor Computer Drive 100GB User Manual
Melissa Styling Iron 235 024 User Manual