Model LC3050 User Guide
LCD TV
Download from Www.Somanuals.com. All Manuals Search And Download.
NEDERLANDS
WAARSCHUWINGEN
- Stel het apparaat niet bloot aan regen of vocht.
- Verwijder de afdekplaat van het apparaat niet.
- Duw niets door de ventilatieopeningen in het apparaat.
- Raak het netsnoer niet met natte handen aan.
- Bedek de ventilatieopeningen niet met enige voorwerpen, zoals tafelkleden,
kranten, gordijnen, enz.
- Plaats geen brandende voorwerpen, zoals kaarsen, op het apparaat.
- Volg bij het weggooien van verbruikte batterijen de overheidswetgeving of
milieuvoorschriften op die van kracht zijn in het land of de regio waarin u zich
bevindt.
- Zorg dat er tenminste 1 meter vrije ruimte boven het toestel is.
- Zorg dat er 0,2 meter vrije ruimte rond het toestel is.
ESPAÑOL
ADVERTENCIAS
- No exponga el equipo a la lluvia ni a la humedad.
- No extraiga la tapa del equipo.
- No introduzca nada en el interior del equipo a través de los orificios de ventilación.
- No maneje el cable de alimentación con las manos mojadas.
- No cubra la ventilación con objetos como manteles, periódicos, cortinas, etc.
- No deben colocarse sobre el equipo elementos con fuego, por ejemplo velas
encendidas.
- Cuando se eliminen baterías usadas, deben cumplirse las reglamentaciones
oficiales o las normas de protección medioambiental aplicables en su país o en su
zona.
- No ponga nada a menos de 1 metro por encima del panel superior.
- Deje un espacio de unos 0,2 metro alrededor de la unidad.
ITALIANO
AVVERTENZE
- Non esporre l’apparecchio alla pioggia o all’umidità.
- Non rimuovere il coperchio dell’apparecchio.
- Non introdurre oggetti all’interno dell’apparecchio attraverso i fori di ventilazione.
- Non toccare il cavo di alimentazione con le mani bagnate.
- Non coprire le fessure di ventilazione con tovaglie, giornali, tende od oggetti
analoghi.
- Non posare sull'apparecchio sorgenti di fiamme scoperte quali candele accese.
- Smaltire le pile usate in conformità alle norme governative o disposizioni
ambientali vigenti nel proprio paese o zona.
- Non posare nulla per circa un metro sopra il pannello superiore.
- Lasciare 0,2 metro liberi tutto intorno l'unità.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings
Warnings
Location
Position your TV so that no bright light or sunlight will shine directly on the screen. Do
not expose the TV to vibration, moisture, dust or heat. Also ensure that the TV is
placed in a position that allows a free flow of air. Do not cover the ventilation openings
on the back cover. You can place it on a table-top.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING :
Cleaning
To reduce the risk of electric shock do not remove cover (or back).
Unplug the TV before cleaning the face of the LCD Screen. Dust the TV by wiping the
screen and cabinet with a soft, clean cloth. If the screen requires additional cleaning,
use a clean, damp cloth. Do not use liquid or aerosol cleaners.
No user serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING :
To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not rub
or strike the Active Matrix LCD with anything hard as this may scratch, mar, or
damage the Active Matrix LCD permanently.
CAUTION:
Do not attempt to modify this product in any way without written authorization.
Unauthorized modification could void the user’s authority to operate this product.
Power
This set operates on a DC supply provided by the AC-DC adaptor, the voltage is as
indicated on the label on the back cover. Use only the AC-DC adaptor supplied with
the set and never apply an AC mains to the set directly. The AC-DC adaptor operates
on an AC mains supply, the voltage is as indicated on the label of the AC-DC adaptor.
a. Connect the DC plug of the AC-DC adaptor to the 24V socket of the set.
b. Connect the AC-DC adaptor and its power cord.
c. Connect the power cord to AC mains.
In the event of thunderstorms or power cuts, please pull out the mains plug of the AC-
DC adaptor and the aerial plug. Do not allow anything to rest upon or roll over the
power cord, and do not place the set where the power cord is subject to damage.
Service
Never remove the back cover of the TV, this can expose you to high voltage and other
hazards. If the TV does not operate properly, unplug it and call your dealer. Antenna
Connect the antenna cable to the connection marked Ant. (on the rear). For best
reception, use an outdoor antenna.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
CONTENTS
Before operating the set, please read this manual carefully.
SUPPLIED ACCESSORIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
EXTERNAL EQUIPMENT CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Battery installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Antenna connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
SCART 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
SCART 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
S-VIDEO input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Headphone jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Sub woofer output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Input terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Remote controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BASIC OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
CONNECTING PC AS MONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Turning the TV On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Picture adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PC/DTV INPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Programme selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Volume adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Last channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Sound mute function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
On screen menu language selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PRODUCT SPEC.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
ON SCREEN MENUS AND DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
SETTING UP TV PROGRAMME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Auto Programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Manual Programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Programme edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PICTURE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Manual Picture Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Auto Picture Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
SOUND CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Auto Sound Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
OTHER FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Auto sleep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Blue back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Auto wide (Aspect Ratio Control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Sound output selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PIP function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Calling the programme list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
TELETEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
TEXT On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
TOP text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
FLOF text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Special TELETEXT functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1
Download from Www.Somanuals.com. All Manuals Search And Download.
SUPPLIED ACCESSORIES
CONTROLS
L Make sure the following accessories are provided with Product.
Front Panel
1. ON/OFF Switches TV set on or off.
2. MENU
1. AC/DC adaptor
2. AC cord
Displays a menu.
3. + CH - (Channel Up/Down)
Selects a programme or a menu item.
4. + VOL - (Volume Up/Down)
Adjusts the volume./ Adjusts menu settings.
5. TV/AV Selects TV, SCART1, SCART2, S-VIDEO, PC-ANALOG or
PC-DIGITAL mode./ Clears the menu frorn the screen.
6. Power Indicator
4. Batteries (2EA)
5. User Guide
3. Remote controller
P
P
R
G
Y
B
6. PC ANALOG IN cable
LIST
Illuminates in red when the TV is in standby mode./ Illuminates in green when the
TV is switched on. Illuminates in blinked when the power save mode(only PC mode).
7. Remote control sensor
TV/AV
TV/PC
MENU
OK
Accepts the IR signal of remote controller.
MUTE
CH
VOL.
7. PC DIGITAL IN cable
1
2
5
8
0
3
6
9
4
7
PIP
CH
RC3050LC
1
2
3
8. PC AUDIO IN cable
4
5
Battery installation
6
7
L Inserting batteries
1. Remove the battery cover by pulling it upward in the direction shown by the arrow.
2. Insert the batteries with correct polarity ( "+" to "+", and "-" to "-" ).
3. Replace the battery compartment cover.
Input terminals
10
1
2
3
4
5
6
7
8
9
→
→
1. DC IN-24V
2. PC ANALOG IN (D-SUB)
3. PC DIGITAL IN (DVI-I)
4. PC AUDIO IN
*Install two high-quality 1.5V "AAA" alkaline batteries. Don't mix old batteries with new
batteries.
*Remove batteries when you won't use the remote controller for long time. Liquid
leakage from old batteries may cause operation failure.
Connect the audio cable from the PC to the PC AUDIO IN of the set.
5. H/P (Headphone out)
Connect a headphone to this socket.
6. S-VIDEO IN
Connect the output of an S -VIDEO VCR to the S-VIDEO input.
L Notes for using remote controller
Connect the audio outputs of an S-VIDEO VCR to the Audio IN (L(MONO), R).
7. SCART2
8. SCART1
Connect the Audio/Video outputs of external equipment to scart jack.
9. Sub woofer OUT
Connect the cable from the Sub woofer to the Sub woofer OUT of the set.
10. Ant. (Antenna input)
• Make sure there are no objects between the remote controller and its sensor.
• Don't place the remote control near a heater or in damp place. Strong impact to the
remote control may cause operation failure.
• Signal from the remote control may be disturbed by sun light or other bright light. In
this case, darken the room or move the TV.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS
CONTROLS
All the functions can be controlled with the remote controller. Some functions can also
be adjusted with the buttons on the front panel of the set.
12. OK
Accepts your selection or displays the current mode.
Remote controller
13.
(Picture effect)
Before you use the remote controller, please
install the batteries.
Recalls your preferred picture setting
14. I-II (Language select)
Selects the language during dual language broadcast.
Selects the sound output.
1
2
5
1.
(Power)
P P
R
G
Y
B
Turns the TV on from standby or off to standby
mode.
3
4
LIST
15.
(Sound effect)
Recalls your preferred sound setting
2.
(Sleep)
Sets the sleep timer.
16. +CH– (Channel up/down)
6
7
8
TV/AV
TV/PC
MENU
Selects next programme or a menu item.
2
3. P P (Last channel)
9
Returns to the previously viewed programme.
17. +VOL– (Volume up/down)
Adjusts the sound level.
Note: In TELETEXT mode,
2
The P P button is used for TELETEXT
Adjusts menu settings.
11
function.
OK
10
18.
MUTE
4. LIST
Turns the sound on and off.
12
15
Displays the programm list menu.
13
14
19. NUMBER buttons
5. TELETEXT Buttons
These buttons are used for TELETEXT.
For further details, see the ‘TELETEXT’
section.
Selects programme numbers.
MUTE
20. PIP
CH
VOL.
17
18
16
Displays a PIP(Picture In Picture) screen.
6.
(Aspect ratio)
1
2
5
8
0
3
6
9
21.
(Position)
Selects a screen mode- 16:9, 14:9, ZOOM 1:1
and Auto Wide.
Selects a position of PIP screen.
4
7
19
22.
(Mode)
7. TV/AV
PIP
Selects a PIP screen mode. – 16:1, 9:1, double window and scan mode
22
25
20
21
23
Selects TV, SCART1, SCART2, S-VIDEO, PC-
Analog or PC-Digital mode.
Clears the menu from the screen.
23.
(Swap)
CH
Switches a main picture for sub picture in PIP mode.
8. TV/PC
24
24.
(Input)
RC3050LC
Selects TV or PC mode directly.
Selects the AV source of sub picture in PIP mode.
9. MENU
5 ∞
25. CH (PIP channel up/down)
Displays a main menu.
Selects a programme when RF signal is displayed in PIP mode.
5∞
10.
Selects a menu item.
23
11.
Adjusts menu settings.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
ON SCREEN MENUS AND DISPLAY
1. Press the MENU button to display main menu.
Turning the TV On and Off
5∞
2. Press the
button to select menus-Picture, Sound, Special, Setup.
Standby Setup: The AC-DC adopter and the AC power cord
must be set up and connected to have the TV in standby mode
23
3. Adjust each menu with the
button.
Equalizer
Flat
P
P
R
G
Y
B
4. Press the MENU button to return to preceding menu.
5. Press the TV/AV button to finish adjusting menu.
ready to be turned on. Press the
POWER button on the
LIST
side panel of the TV to go into standby mode.
1. If the TV is in standby mode, press the
Music
Movie
Speech
User
button on the
remote controller or the TV itself to turn the TV on.
2. Press the button again on the remote controller or
the TV itself to turn the TV off.
Picture
Main menu
Contrast
Brightness
Colour
90
75
75
50
0
3
3
3
3
Picture
Sound
Special
Setup
TV/AV
TV/PC
MENU
0.1 0.5 1.5 5.0 10kHz
5∞ 23
Sharpness
Tint
MENU TV/AV
Note : If the TV is on and the
button is pressed
to turn the TV off, the TV goes into standby mode.
OK
Auto programme
System
BG
1
Programme selection
5∞ 23
5∞ 23
Storage from
Start
MENU TV/AV
MENU TV/AV
You can select a Programme number with the CH+ – button or
NUMBER buttons.
MUTE
Sound
CH
VOL.
Equalizer
Balance
AVL
3
0
P
P
R
G
Y
B
Volume adjustment
5∞ 23
MENU TV/AV
Off
1
2
5
8
0
3
6
9
Press the VOL.+ – button to adjust the sound level.
LIST
Surround
Volume
Sub woofer
Off
30
0
4
7
Manual programme
System
BG
5
PIP
Last channel
Channel
Fine
V/UHF
TV/AV
TV/PC
MENU
2
Press the P P button to view the last channel you were
333
watching.
CH
5∞ 23
MENU TV/AV
333
Search
Name
Storage
1
OK
RC3050LC
Sound mute function
Special
5∞ 23
Press the
MUTE button. The sound is switched off and the
OK MENU TV/AV
Input
TV
mute display
appears.
Auto sleep
Blue back
Auto wide
Off
On
Off
To cancel mute mode, press the
VOL.+ – or button.
MUTE button again,
Programme edit
0 -----
5
1
2
3
4
6
MUTE
CH
VOL.
7
8 -----
9 -----
On screen menu language selection
The menu can be displayed on the screen in desired
language.
5∞ 23
MENU TV/AV
1
2
5
8
0
3
6
9
¶
¶
Copy
Delete
Language
English
4
7
¶
¶
Skip
Move
First select your language.
1. Press the MENU button.
2. Select the Setup menu.
3. Select the Language.
Setup
Deutsch
Français
Italiano
PIP
3
3
3
3
Auto programme
Manual programme
Programme edit
Language
Language
English
CH
Español
5∞
4. Press the
button to select your desired language.
Deutsch
Français
Italiano
5. Press the TV/AV button.
All the on screen menu will appear in the selected language.
RC3050LC
5∞
MENU TV/AV
Español
5∞ 23
MENU TV/AV
5∞
MENU TV/AV
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP TV PROGRAMME
SETTING UP TV PROGRAMME
Once you have preset the programme, you will be able to
use the CH+ – or NUMBER buttons to scan the
programme you programmed.
Programme can be tuned using Auto or Manual
programme menu.
Manual Programme
Manual programme
Auto programme
Manual Programme lets you manually tune and arrange
the programme in whatever order you desire. Also you can
assign a programme name with 5 characters to each
programme number.
System
Channel
Fine
BG
5
System
BG
1
V/UHF
Storage from
Start
333
333
Search
Name
1. Press the MENU button.
2. Select the Setup menu.
3. Select Manual programme menu.
Auto Programme
Storage
1
All programme that can be received are stored by this
method. It is recommended that you use Auto programme
during installation of this set.
5∞ 23
5∞ 23
OK MENU TV/AV
MENU TV/AV
5∞
4. Press the
5. Select a TV system with the
BG : (West Europe/Asia/M.East/Africa/Australia)
: (UK/Hong Kong/South Africa)
button to select System.
23
button.
1. Press the MENU button.
2. Select the Setup menu.
3. Select the Auto programme menu.
5∞
I
DK : (Russia/China/East Europe)
L
: (France)
5∞
P
P
R
G
Y
B
P
P
R
G
Y
4. Press the
button to select System.
6. Press the
7. Press the
button to select Channel.
LIST
LIST
23
5. Select a TV system with the
BG : (West Europe/Asia/M.East/Africa/Australia)
: (UK/Hong Kong/South Africa)
DK : (Russia/China/East Europe)
: (France)
5∞
button;
23
button to select V/UHF or Cable as
required. If possible, select the programme number
directly with the number buttons.
I
B
5∞
8. Press the
button to select Search. Press the
TV/AV
TV/PC
MENU
TV/AV
TV/PC
MENU
L
2 3
button to commence searching. If a channel
6. Press the
button to select Storage from.
is found the search will stop.
7. Select the beginning programme number with the
CH+ – button or NUMBER buttons.
8. Start Auto programme, press the MENU button to
finish auto programme
9. Press the TV/AV button to finish Auto programme.
10. Press the TV/AV button to return to normal TV
viewing.
5∞
9. If this programme is the one required, press the
button to select Storage. Select the desired
programme number with the
NUMBER buttons.
10. Press the OK button to store it. The display Stored
will appear.
OK
OK
23
button or
To store another programme, repeat steps 5 to 10.
MUTE
MUTE
CH
VOL.
CH
VOL.
1
2
5
8
0
3
6
9
1
2
5
8
0
3
6
9
4
7
4
7
PIP
PIP
CH
CH
RC3050LC
RC3050LC
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP TV PROGRAMME
PICTURE CONTROL
You can adjust picture Contrast, Brightness, Colour, Sharpness and Tint to the levels
you prefer.
Programme edit
Programme edit
This function enables you to delete, copy, move or skip or
skip the stored programme.
0 -----
5
1
2
3
4
¶
6
Also you can move some programme to other programme
numbers or insert a blank programme data into the
selected programme number.
Picture
Manual Picture Control
7
Contrast
Brightness
Colour
90
75
75
50
0
1. Press the MENU button.
2. Select the Picture.
5∞
8 -----
9 -----
¶
Copy
1. Press the MENU button.
Delete
3. Press the
4. Press the
buttons to select a picture item.
buttons to adjust the picture condition
Sharpness
Tint
¶
Move
¶
Skip
2. Select the Setup menu.
23
5∞
3. Press the
button select Programme edit.
as you want.
5. Press the TV/AV button to store for the picture User.
5∞
23
Select the programme name to edit with the
and
.
Deleting a programme
5∞ 23
MENU TV/AV
5∞
1. Select a programme to be deleted with the
or
Selected Item
Contrast
Brightness
Color
Setting Change
23
button.
P
P
R
G
Y
B
R
2. Press the
(Red) button twice.
LIST
The selected programme is deleted, all the
following programme is shifted up one position.
2
3
More darkness
0~100
More light
P
P
R
G
Y
B
2
3
Less bright
0~100
More bright
Copying a programme
TV/AV
TV/PC
MENU
LIST
5∞
1. Select a programme to be copied with the
or
2 3
button.
2
3
Lower color intensity
0~100
Higher color intensity
G
2. Press the
(Green) button.
All the following programmes are shifted down one
position.
TV/AV
TV/PC
MENU
OK
2
3
Sharpness
Tint
Soft picture
0~100
Hard picture
Moving a programme
2
3
More purple 50~50 More green
5∞
1. Select a programme to be moved with the
or
OK
23
button.
Y
2. Press the
(Yellow) button.
MUTE
CH
VOL.
3. Move the programme to desired programme
5∞ 23
Auto Picture Control
number with the
4. Press the
function.
or
button.
Y
(Yellow) button again to release this
1
2
5
8
0
3
6
9
Picture effect
MUTE
4
7
CH
VOL.
1. Press the
2. Press the
button.
button repeatedly to select [PSM].
Each press of the button changes the screen display as
below.
Skipping a programme number
1. Select a programme number to be skipped with the
5∞ 23
PIP
1
2
5
8
0
3
6
9
or
button.
4
7
CH
B
2. Press the
(Blue) button. The skipped
Dynamic → Standard → Mild → Game → User
programme turns to blue.
3. Press the
skipped programme.
PIP
B
(Blue) button again to release the
RC3050LC
CH
Note: When a programme number is skipped it
means that you will be unable to select it using the
CH+ – button during normal TV viewing. If you want to
select the skipped programme, directly enter the
programme number with the NUMBER buttons or
select it in the programme edit or table menu.
• Dynamic : Vivid Picture Appearance
• Standard : Standard Picture Appearance
• Mild : Softer Picture Appearance
• Game : External Video Game Picture Setup
• User : Manual Picture Setup
RC3050LC
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND CONTROL
OTHER FUNCTIONS
You can select your preferred sound setting; Flat, Music,
Movie or Speech and you can also adjust the sound
frequency of equalizer, balance. If you switch AVL to on,
the set automatically keeps on an equal volume level even
if you change programme.
TV, SCART1, SCART2 and S-VIDEO modes
(You can’t set PC mode in this menu. Use the TV/AV
button)
External equipment inputs:S-VIDEO mode are used for
video devices like VCRs, DVDs, etc.), SCARTmode is used
for SCART type devices.
Sound
Special
Equalizer
Balance
AVL
3
0
Input
TV
Off
On
Off
Auto sleep
Blue back
Auto wide
Off
Off
30
0
Surround
Volume
Sub woofer
1. Press the MENU button.
2. Select the Sound menu.
5∞
3. Press the
button to select the desired
Note : If a VCR is connected to the antenna jack, use TV
mode. See External Equipment Connection section.
1. Press the MENU button.
sound item; Equalizer, Balance, AVL, Surround,
Volume or Sub woofer.
5∞ 23
5∞ 23
MENU TV/AV
MENU TV/AV
23
4. Press the
5. Press the
button to make desired adjustment.
button in Equalizer to set the
2. Select the Special menu.
23
5∞
3. Press the
4. Press the
button to select Input.
button to select TV, SCART1, SCART2
Equalizer
Flat
Equalizer.
23
5∞
6. Press the
button to select your preferred setting
and S-VIDEO.
Music
Movie
Speech
User
; Flat, Music, Movie, Speech or User.
To set the Equalizer User.
5∞
P
P
R
SCART1 : AV device connected to the SCART1 jack.
a. Select User by pressing the
b. Select a sound band by pressing the
button.
c. Make appropriate sound level with the
button.
button.
G
Y
B
LIST
23
SCART2 : AV device connected to the SCART2 jack.
0.1 0.5 1.5 5.0 10kHz
MENU TV/AV
5∞
5∞ 23
S-VIDEO : S-VIDEO device connected to the TV's S-
TV/AV
TV/PC
MENU
VIDEO Input.
d. Press the MENU button to return to preceding
MENU and the TV/AV button to return to normal
TV viewing.
To return to TV mode, press the TV/AV button.
P
P
R
G
Y
B
7. Select the Balance menu and adjust the balance of
speakers.
8. Select the AVL (Automatic Volume Leveler) menu
On or Off
OK
Alternatively you can select the TV, SCART1, SCART2, S-
VIDEO, PC-ANALOG or PC-DIGITAL mode by pressing
the TV/AV button.
LIST
9. Select the Surround menu On or Off.
10. Select the Volume menu and adjust the volume
from headphone.
11. Select the Sub woofer menu to adjust the bass
volume.(It is possible when the Sub woofer is
connected to the set.)
Auto sleep
TV/AV
TV/PC
MENU
If you select Auto sleep On the set will automatically
switch itself to standby mode approximately ten minutes
after a TV Channel stops broadcasting.
1. Press the MENU button, select the Special menu.
5∞
MUTE
CH
VOL.
OK
1
4
2
5
8
0
3
6
9
2. Press the
3. Press the
button to select Auto sleep.
23
button to select On.
7
L The sound Flat, Music, Movie and Speech are
programmed for good sound reproduction at the factory
and cannot be changed.
4. Press the TV/AV button to return to normal TV
viewing.
PIP
CH
MUTE
Blue back
CH
VOL.
Programme without a program signal appear in blue.
Auto Sound Control
RC3050LC
1
4
2
5
8
0
3
6
9
Sound effect
Auto wide (Aspect Ratio Control)
1. Press the button.
Press the
button to select a desired picture format.
7
2. Press the
button repeatedly to select.
Each press of the
14:9, ZOOM, 1:1 and Auto wide mode.
button, selects Auto Wide, 16:9,
Each press of the button changes the screen display as
below.
PIP
CH
Flat → Music → Movie → Speech → User
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER FUNCTIONS
OTHER FUNCTIONS
Sleep timer
Calling the programme list
You can check the programmes stored in the memory
by displaying the programme list.
Programme list
You don’t have to remember to switch the set off before
you go to sleep. The sleep timer automatically switches
the set to standby after the preset time elapses.
0 -----
5
1
2
3
4
6
Displaying programme list
7
Press the
button to select the number of minutes. The
1. Press the LIST/
button to display the Programme
8 -----
9 -----
display will appear on the screen, followed by 0, 10, 20,
30, 60, 90, 120, 180 and 240. The timer begins to count
down from the number of minutes selected.
Note:
a. To view the remaining sleep time, press the
once.
list menu in TV mdoe. The programme list appears on
the screen.
0
One programme list contains ten programmes as right.
5∞ 23
OK MENU TV/AV
Note :
button
a. You may find some blue programmes.
They have been set up to be skipped by auto
programming or in the programme edit mode.
b. Some programmes with the channel number
shown in the programme list indicate there is no
station name assigned.
b. To cancel the sleep time, Select 0 with the
button.
Sound output selection
P
P
R
G
Y
B
P
P
R
G
Y
B
In VIDEO mode, you can select output sound for the left and
right loudspeakers. Repeatedly press the I-II button to select
the sound output.
LIST
LIST
Selecting a programme in the programme list
5∞ 23
L+R : Audio signal from audio L input is sent to left
loudspeaker and audio signal from audio R input is sent
to right loudspeaker.
Select a progranne with the
or
button.
TV/AV
TV/PC
MENU
Then press the OK button.
The set switches to the chosen programme number.
TV/AV
TV/PC
MENU
L+L : Audio signal from audio L input is sent to left and right
loudspeakers.
Paging through a programme list
There are 10 programme table pages in which contain
100 programmes.
OK
R+R : Audio signal from audio R input is sent to left and right
loudspeakers.
OK
5∞ 23
Pressing the
the pages.
or
button repeatedly turns
PIP function
PIP will let you view two separate source inputs on your TV
screen at the same time.
MUTE
MUTE
CH
VOL.
CH
VOL.
Viewing the PIP picture
Press the PIP button. (Press the PIP button again, to turn
PIP off.)
1
2
5
8
0
3
6
9
1
2
5
8
0
3
6
9
4
7
4
7
Selecting the PIP picture mode
PIP
Press the
button to adjust the PIP picture mode.
PIP
Each press the
window and multi picture mode. ( Multi picture mode is
just available when the main picture is in AV mode.)
button, selects the 16:1, 9:1, double
CH
CH
RC3050LC
Moving the PIP picture
RC3050LC
Press the
button to adjust the position of sub picture in
PIP mode.
Switching the main and PIP picture
Press the
button to switch the main and sub picture in
PIP mode.
Viewing the external source input
Press the
Press the CH
picture.
button to select the input source of sub picture in PIP mode.
5∞
8
button to select the programme desired in TV mode of sub
Download from Www.Somanuals.com. All Manuals Search And Download.
TELETEXT
TELETEXT
Special TELETEXT functions
MENU
TEXT On/Off
Press the
button to switch to TELETEXT in TV mode.
Functions
The initial page or last selected page appears on the screen.
The first page number indicates your selection, while the
second shows the current page displayed.
Changes TELETEXT mode
P
P
R
G
Y
B
; Only TELETEXT mode, text mode superimposed on
the TV picture, TV mode.
TEXT/MIX
1. Press
pages. (TEXT)
2. Press
button once, displays the TELETEXT
LIST
button once more, displays the
Selects double height text.
TELETEXT pages superimposed on the TV picture.
(MIX)
3. Press the
more, Text mode is off, and TV mode appears.
If you press button displays are changed as below.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the
page.
TV/AV
TV/PC
MENU
SIZE
button to switch off TELETEXT once
Press this button again to return to the normal display.
OK
Stops the automatic page change, which will occur if a
TELETEXT page consists of 2 or more sub pages. The
number of sub pages and the sub page displayed is,
usually, shown on the screen below the time. When this
button is pressed the stop symbol is displayed at the
top left-hand corner of the screen and the automatic
page change is inhibited. To continue press this button
again.
TEXT → MIX → TV mode
HOLD
TOP text
MUTE
The user guide displays four fields-red, green, yellow and
blue at the bottom of the screen. The yellow field denotes the
next group and the blue field indicates the next block.
CH
VOL.
1
2
5
8
0
3
6
9
4
7
Group/block/page selection
B
1. With the
to block.
2. Use the
(Blue) button you can progress from block
Return to index page
INDEX
PIP
Y
(Yellow) button to proceed to the next
CH
group with automatic overflow to the next block.
G
3. With the
(Green) button you can proceed to the
Displays the TV picture on the screen while waiting for
the new TELETEXT page. The display will appear at
the top left hand corner of the screen. When the
updated page is available then display will change to
the page number.
next existing page with automatic overflow to the next
RC3050LC
5∞
group. Alternatively the
4. The
button can be used.
(Red) button permits to return to previous
5∞
UPDATE
R
selection. Alternatively the
button can be used.
Press this button to view the updated TELETEXT page.
FLOF text
The Teletext pages are colour coded along the bottom of the
screen and are selected by pressing the corresponding
coloured button.
When viewing a TV programme, press this button to
display the time at the top right hand corner of the
screen. Press this button again to remove the display.
In TELETEXT mode press this button to select and hold
or change a four-digit sub page number. This is
displayed along the bottom of the screen. Press this
button again to exit this function.
TIME
Page selection
1. Press the LIST/
button to select the index page.
2. You can select the pages, which are colour coded
along the bottom line with the same coloured buttons.
23
3. The
button can be used to select the preceding or
Press this button to display the concealed information,
such as solutions of riddles or puzzles.
Press this button again to remove the information from
the display.
following page.
REVEAL
9
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL EQUIPMENT CONNECTION
EXTERNAL EQUIPMENT CONNECTION
You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Examples are shown below.
S-VIDEO input
If using an S-VIDEO source, the picture
quality will be improved over a video
source.
Antenna connection
1. Connect RF out on the VCR to
the Antenna input on the rear of
the TV.
1. Connect the S-VIDEO output of a
VCR to the S-VIDEO input on the
TV.
2. Connect the audio cables from the
S-VIDEO VCR to the L (MONO) R
inputs on the TV.
3. Select S-VIDEO mode by pressing
the TV/AV button repeatedly.
4. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
DC24V
L
S-VIDEO
R
SCART2
SCART1
ANT.
2. Connect the antenna cable to
DC24V
the antenna in jack on the VCR.
3. Use the TV/AV button to select
TV mode.
S-VIDEO, L/R
(VCR)
SCART2
SCART1
ANT.
4. Press the PLAY button on the
VCR.
VCR
Headphone jack
SCART 1
Insert the headphone plug to the headphone jack on the TV. You can listen to the
1. Connect the A/V out jacks on
the AV device to SCART jack
on the TV.
sound through the headphone; no sound from the speaker on the TV. To adjust the
headphone volume, use the
Volume menu in the Sound menu.
Headphone
2. Use the TV/AV button to select
SCART1 mode.
DC24V
DC24V
3. Press the PLAY button on the
VCR.
SCART2
SCART1
ANT.
SCART2
SCART1
ANT.
The VCR playback picture
appears on the TV screen.
SCART
(VCR)
SCART 2
1. Connect the AV out jacks on the AV device to the SCART on the TV.
2. Use the TV/AV button to select
Sub woofer output
Connect the cable of the sub woofer to the sub woofer output on the TV.
SCART2 mode.
You can listen to the bass well. To adjust the bass volume, use the Sub woofer menu
in the sound menu.
DC24V
3. Press the PLAY button on the
DVD.
SCART2
SCART1
ANT.
Sub woofer
DC24V
SCART
(DVD)
SCART2
SCART1
ANT.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING PC AS MONITOR
CONNECTING PC AS MONITOR
Contrast
Picture adjustment
You can adjust picture Contrast, Brightness,
Temperature, Horizontal/Vertical position, Clock, Phase,
Auto and Reset as you prefer.
1. Press the TV/AV or TV/PC button to select the PC
mode.
PC/DTV INPUT
5
1. Connect the PC IN cable (D sub jack) from the monitor output socket of the PC
to the PC/DTV input socket of the set.
2
3
0
100
100
2. Connect the PC AUDIO IN cable from the PC to the PC AUDIO IN of the set.
3. Press the TV/AV or TV/PC button to select PC ANALOG IN mode.
4. Switch on the PC, and
the PC screen appears
on the set.
The set can be operated
as the PC monitor.
∞
1024 X 768
48.4KHz 60.0Hz
AUTO
2. Press the MENU button.
5∞
3. Press the
item.
4. Press the
button to select the desired picture
button to make appropriate
5∞ 23
MENU TV/AV
SCART2
SCART1
AN
23
adjustments.
PC AUDIO IN
PC ANALOG IN
Contrast
Clock
PC DIGITAL IN
DVI (Digital Visual Interface)
INPUT
Brightness
Temperature
H-position
V-position
Phase
AUTO
Auto
P
P
R
G
Y
B
1. Connect the DVI of PC to the DVI input on the TV.
Reset
2. Select PC-DIGITAL mode by pressing the TV/AV button repeatedly. (When DVI
source is connected, TV/AV mode converts PC to DVI mode.)
LIST
Contrast
Resolution
Mode
TV/AV
TV/PC
MENU
This function is to adjust picture to light/dark.
Brightness
Horizontal
Vertical
Resolution
frequency (KHz) frequency (Hz)
This function is to adjust brightness of picture.
Temperature
640X480
640X480
640X480
640X480
720X400
31.5 KHz
35 KHz
37.9 KHz
37.5 KHz
31.5 KHz
60 Hz
67 Hz
72 Hz
75 Hz
70 Hz
OK
Temperature is a measure of the warmth of the image color.
Horizontal Position/Vertical Position
This function is to adjust picture to left/right and up/down
as you prefer.
VGA
Clock
This function is to minimize any vertical bars or stripes visible
MUTE
CH
VOL.
800X600
800X600
800X600
800X600
35.2 KHz
37.9 KHz
48.1 KHz
46.9 KHz
56 Hz
60 Hz
72 Hz
75 Hz
on the screen background. And the horizontal screen size will
also change.
Phase
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
Auto
This function is for the automatic adjustment of the screen
position, clock and clock phase. The displayed image will
disappear for a few seconds while the Auto-configuration is in
process.
SVGA
XGA
1
2
5
8
0
3
6
9
4
7
1024X768
1024X768
1024X768
48.4KHz
56.5 KHz
60.2 KHz
60Hz
70 Hz
75 Hz
PIP
CH
WXGA
1280X768
47.7 KHz
60 Hz
Note: Some signal from some graphics boards may not
function properly.
If the results are unsatisfactory, adjust your monitor’s and
clock phase manually.
RC3050LC
Note:
a. If possible, use the VESA 1,024x768@60Hz video mode to obtain the best
image quality for your LCD monitor. If used under the other resolutions, some
scaled or processed pictures may appear on the screen. The set has been pre-
adjusted to the mode VESA 1,024x 768 @60Hz.
b. Some dot defects may appear on the screen, like Red, Green or Blue spots.
However, this will have no impact or effect on the monitor performance.
Reset
This function allows you to return to the good picture
reproduction programmed at the factory and cannot be
changed.
11
5. Press the TV/AV button to exit menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT SPEC.
TROUBLESHOOTING
Problem
Check item
Model
LC3050
• Insert the AC power cord plug securely in AC power
outlet.
• Make sure the remote control is not in the standby
mode (The POWER/Standby indicator is red.)
• Turn on the MAIN POWER button on the top of the
display.
Horizontal size 850 mm
Thickness 210 mm
Weight 15 kg
No picture on screen and no sound
from speakers.
Main body
Height
485 mm
Power requirements
Television system
Television programme
LCD Panel
DC 24V/6.0A
• Check the brightness setting of the display.
• Lamp may have malfunction.
• Make sure a cable with no VIDEO input signal is
connected to the S-VIDEO INPUT terminal.
No picture/No picture from AV
terminal.
PAL-BG, I, DK/ SECAM-BG, DK, L
VHF: 2~13 UHF: 21~69 Cable: S1~S41
30” wide TFT LCD panel
• Check the sound setting.
• Make sure the sound is not muted.
• Make sure the connectors of the optional speaker
system are securely inserted.
Picture is displayed, but no sound
from the speakers.
Power consumption
MAX. 130W
• Make sure the setting of AV OUTPUT terminal
External antenna impedance 75Ω
Picture is too light
Picture is too dark.
• Make sure COLOR and CONTRAST settings.
• Make sure BRIGHTNESS setting is not set too low.
• Check to see if BRIGHTNESS setting
• Lamp may have malfunction.
Audio output
10W + 10W
• DVI-IN 1*1
• S-VIDEO IN 1
• Change the batteries.
• HEADPHONE JACK 1
• PC AUDIO IN 1
• POWER IN 1
• PC IN 1
• Make sure the infrared transmitter window is not
receiving strong light such as light from fluorescent
lamps.
Remote control does not work.
External IN/OUT ports
• SCART 2
• ANTENNA IN 1
• Make sure AV INPUT is not set.
• Make sure the input source other than AV
No picture from AV OUT terminal.
• SUB WOOFER OUT 1
• The reception may be weak.
The picture is not sharp.
The picture moves.
AC 100-240V, 5.0A, 50/60Hz,
OUTPUT : 24VDC., 6.0A
• The state of the broadcast may also be bad.
• Make sure the antenna is facing the right direction.
• Make sure the outside antenna is not disconnected.
AC Power Adaptor
• Make sure the antenna is facing the right direction.
• There may be reflected electric waves from mountains
or buildings.
The picture is doubled or tripled.
The picture is spotted.
*1 Compatible with HDCP.
Supported Signals
• There may be interference from automobiles, trains,
high voltage lines, neon lights, etc.
• There may be interference between the antenna cable
and power cable. Try positioning them further apart.
•640 x 480P @ 60Hz
•1280 x 720P @ 50/60Hz
•1920 x 1080I @ 50/60Hz
•720 x 480P @ 60Hz
•720 x 576P @ 50Hz
• Is the unit receiving interference from other devices?
Transmission antennas of radio broadcasting stations
and transmission antennas of amateur radios and
cellular phones may also cause interference.
• Use the unit as far apart as possible from devices that
may cause possible interference.
Note: In some cases a signal on the LCD TV may not be displayed properly. The
problem may be an inconsistency with standards from the source equipment (DVD,
Set-top box, etc...). If you do experience such a problem please contact Marantz
Service Center, Inc. and also the manufacturer of the source equipment.
There are stripes on the screen or
colors fade.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
You can find your nearest authorized distributor or dealer on our website.
JAPAN
U.S.A.
Marantz Japan, Inc.
Marantz America, Inc.
Marantz Europe B.V.
35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan
1100 Maplewood Drive, Itasca, IL 60143, U.S.A.
EUROPE
P.O. Box 8744, 5605 LS Eindhoven, The Netherlands
is a registered trademark.
Printed in Japan
2004/04 ECMi
??AW851310
Download from Www.Somanuals.com. All Manuals Search And Download.
|