Model VC6001 User Guide
5 Disc Super Audio CD/
DVD Changer
CLASS 1 LASER PRODUCT
LUOKAN LASERLAITE
KLASS 1 LASERAPPARAT
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Safety Information!
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
•
This product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have been
adhered to.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
•
•
Apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
When the switch is in the OFF position, the apparatus
isn’t completely switched-off from the MAINS.
7) Do not block any ventilation openings, Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience
receptacles, and the point where
they exit from the apparatus.
11) Only use attachments/accessories
specified by the manufacturer.
12) Use only with cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
- Do not place anything about 0.1 meter above
the top panel.
FCC NOTE (for U. S. A only):
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reason-
able protection against harmful interference in a residential
installation. This equipment generates, uses and can radi-
ate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures.
- Make a space of about 0.1 meter around the
unit.
- No objects filled with liquids, such as vases,
shall be placed on the apparatus.
- When the switch is in the OFF position, the
equipment is not completely switched off from
MAINS.
- The equipment shall be installed near the
power supply so that the power supply is
easily accessible.
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and re-
ceiver.
•
•
Connect this equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
WARRANTY
For warranty information, contact your local Marantz
distributor.
RETAINYOUR PURCHASE RECEIPT
NOTE: Changes or modifications may cause
this unit to fail to comply with Part 15 of the
FCC Rules and may void the user’s authority to
operate the equipment.
Your purchase receipt is your permanent record of a valua-
ble purchase. It should be kept in a safe place to be referred
to as necessary for insurance purposes of when corre-
sponding with Marantz.
IMPORTANT
This Class B digital apparatus complies with
Canadian ICES-003.
When seeking warranty service, it is the responsibility of the
consumer to establish proof and date of purchase. Your pur-
chase receipt or invoice is adequate for such proof.
Cet appareil numérique de la Classe B est
conforme á la norme NMB-003 du Canada.
FOR U.K. ONLY
This undertaking is in addition to a consumer’s statutory
rights and does not affect those rights in any way.
This product satisfies FCC regulations when shielded cables
and connectors are used to connect the unit to other equip-
ment. To prevent electromagnetic interference with electric
appliances, such as radios and televisions, use shielded
cables and connectors for connections.
Disc Storage
Be careful not to harm the disc because the data on these
discs is highly vulnerable to the environment.
•
•
•
•
Do not keep under direct sunlight.
Keep in a cool ventilated area.
Store vertically.
Keep in a clean protection jacket.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord
from the AC outlet.
CE marking (for Europe only)
•
Do not use benzene, thinner, or other solvents for clean-
ing.
Wipe the cabinet with a soft cloth.
This product is in conformity with the
EMC directive and low-voltage directive.
•
WARNINGS
- Do not expose the equipment to rain or mois-
ture.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable
and can be reused. This product and the
accessories packed together are the applicable
product to the WEEE directive except batteries.
Please dispose of any materials in accordance
with your local recycling regulations.
- Do not remove the cover from the equipment.
- Do not insert anything into the equipment
through the ventilation holes.
- Do not handle the mains lead with wet hands.
- Do not cover the ventilation with any items
such as tablecloths, newspapers, curtains, etc.
When discarding the unit, comply with your local
rules or regulations.
- No naked flame sources, such as lighted can-
dles, should be placed on the equipment.
Batteries should never be thrown away or
incinerated but disposed of in accordance with
your local regulations concerning chemical
wastes.
- When disposing of used batteries, please
comply with governmental regulations or envi-
ronmental public instruction’s rules that apply
in your country or area.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table Of Contents
6
7
DVD Setup Menu
1
2
Before You Start
Setting up the GENERAL SETUP page.............................. 35
Setting up the AUDIO SETUP page.................................. 38
Setting up the VIDEO SETUP page................................... 43
Setting up the PREFERENCE page..................................... 48
Features.......................................................................................6
What’s in the box......................................................................7
Putting the batteries in the remote control........................7
Using the remote control .......................................................7
Discs compatible with this player.........................................8
DVD-Video regions...................................................................9
General information.................................................................9
MP3 compatibility information .............................................9
WMA compatibility information............................................9
JPEG compatibility information .............................................9
DivX compatibility information .............................................9
Additional Information
Language Codes .................................................................... 52
Handling discs........................................................................ 53
Storing discs........................................................................... 53
Discs to avoid......................................................................... 53
Cleaning the pickup lens...................................................... 53
Problems with condensation............................................... 53
Connecting Up
Hints on installation.............................................................. 54
Moving the player.................................................................. 54
Precautions on using the power cord............................... 54
Troubleshooting..................................................................... 55
Specifications ......................................................................... 58
Easy setup................................................................................10
Home theater video connections .......................................11
Home theater audio connections.......................................12
3
4
Controls & Displays
Front panel...............................................................................13
Remote control .......................................................................14
Getting Started
Playing discs ............................................................................15
Basic playback controls.........................................................16
Resuming playback from the last stopped point.............16
Navigating DVD disc menus.................................................17
Navigating Video CD PBC menus .......................................17
5
Playing Discs
Introduction.............................................................................18
Preview function......................................................................18
Fast Forward/Fast Reversed................................................. 20
Still Frame/Slow Play/Frame Advance Playback...............21
Using the page....................................................................... 22
Using the Repeat Play .......................................................... 22
Looping a section of a disc ................................................. 23
Using the Random (SHUFFLE) Play................................... 23
Switching Camera Angles..................................................... 24
Switching the Subtitle Language ....................................... 24
Switching the Audio Language ......................................... 25
Switching the audio channel............................................... 25
Switching Super Audio CD Playback layer....................... 25
Switching Super Audio CD Playback area........................ 25
Using the Zoom Function.................................................... 25
Play back Information........................................................... 26
Playing a JPEG image file (slide show) .............™................. 30
Playing an MP3/DivX/JPEG/Windows Media
Audio disc ............................................................................... 29
Playing MP3/WMA music and JPEG pictures
simultaneously.........................................................................31
Playing a DivX disc................................................................ 32
Using the Setup Menu ......................................................... 33
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Before You Start
Superlative audio performance with
Super Audio CD, DVD-Audio, Dolby*
Features
4
1
An HDCP-compatible HDMI*
5
Digital and DTS* software
terminal is provided for fully digital
transmission that ensures the very
highest picture and digital sound
quality.
Logos:
The VC6001 delivers breathtaking sound
quality with Super Audio CD, DVD-Audio,
Dolby Digital and DTS discs.
This unit comes with a High-Definition
Multimedia Interface (HDMI) jack; an
extended DVI interface for next-generation
televisions. This interface allows transfers
of uncompressed digital video and digital
audio (audio streams such as Dolby Digital
and DTS as well as linear PCM) with a
single connector. HDMI standard Ver. 1.1
6
DivX
*
®
You can enjoy DivX files which are
recorded on DVD R/RW or CD-R/RW.
Plays DivX5.2, DivX4, DivX3 and DivX
VOD Video content (see pages 29, 32).
• This player supports Quarter Pixel.
compatibility means the unit can also
transfer DVD-Audio multi-channel audio
over HDMI.
• This player supports GMC.
7
MP3 and WMA*
compatibility
End-to-end full-digital transfers with all
digital processing allow the enjoyment
of realistic video without any image
This player is compatible with CD-R, CD-
RW and CD-ROM discs that contain MP3
and WMA audio tracks (see pages 29, 31).
degradation caused by AD/DA conversions.
And the unit can up-convert 480p video
signals to 720p, 1080i, and 1080p video
output signals using the scaling function
and the HDMI jack (see pages 11, 46).
JPEG compatibility
This player is compatible with CD-R, CD-
RW and CD-ROM discs that contain JPEG
data (see pages 29, 30, 31).
High quality 12-bit/216 MHz Video
2
D/A converter*
1
*
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
The unit uses a Video D/A converter that
performs D/A conversion of all video
signals in 12-bits and can perform 8x over-
sampling to let you enjoy beautiful video
possible with DVD. Furthermore, NSV
technology suppresses noise during DA
conversion.
2
3
4
*
*
*
“NSV” is a registered trademark of Analog Device
Co. Ltd.
“DCDi” is a registered trademark of Fraoudja, a
division of Genesis Microchip, Inc.
Manufactured under license from Dolby
Laboratories. “Dolby” “Pro Logic” and the
double-D symbol are trademarks of Dolby
3
DCDi
*
Laboratories.
5
6
*
“DTS” and “DTS Digital Surround” are registered
DCDi (Directional Correction
trademarks of DTS, Inc.
Deinterlacing) computes and tracks the
angle of the screen edge to fill in the
missing pixels on the TV screen. DCDi
significantly optimizes the image quality,
especially during slow motion playback.
This function is available only for
progressive scan output.
*
“DivX”, and “DivX Ultra” Certified, and associated
logos are trademarks of DivX, Inc. and are used
under license.
7
*
Windows Media and the Windows logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
High quality 24-bit/192 kHz DAC
The high specification 24-bit/192 kHz DAC
delivers dynamic, smooth and expansive
analog sound from CDs and DVDs.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start
1
What’s in the box
Using the remote control
Thank you for buying this MARANTZ
Keep in mind the following when using the
remote control:
product. Please confirm that the following
accessories are in the box when you open
•
•
Make sure that there are no obstacles between
the remote control and the remote sensor on the
unit.
it.
•
•
•
•
•
•
•
Remote control
Use within the operating range and angle, as
AAA/R03 dry cell batteries x2
Audio/Video cable (yellow/red/white)
System control cable
Power cable
shown.
5m (16 feet)
User Guide (this manual)
Warranty card
30
30
•
•
•
Remote operation may become unreliable if
strong sunlight or fluorescent light is shining on
the unit’s remote sensor.
Putting the batteries in the remote
control
Remote controllers for different devices can
interfere with each other. Avoid using remotes for
other equipment located close to this unit.
1
2
Open the battery
compartment cover on
the back of the remote
control.
Replace the batteries when you notice a fall off in
the operating range of the remote control.
Note
Insert two AAA/R03
batteries into the battery
compartment following
ª ·
•
When using this player independently, set the
REMOTE CONTROL switch on the rear panel to
INT. (INTERNAL) (see page 10).
the indications (
,
)
inside the compartment.
Close the cover.
3
Note
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the following:
•
•
Don’t mix new and old batteries together.
Don’t use different kinds of battery together.
Although they may look similar, different batteries
may have different voltages.
•
•
Make sure that the plus and minus ends of each
battery match the indications in the battery
compartment.
Remove batteries from equipment that isn’t going
to be used for a month or more.
When disposing of used batteries, please comply
with governmental regulations or environmental
bylaws that apply in your country or area.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Before You Start
Super Audio CD compatibility:
Discs compatible with this player
Any disc that displays one of the following
logos should play in this player. Other
formats, including DVD-RAM, DVD-ROM,
CD-ROM (except those that contain MP3/
DivX/WMA/JPEG files) and Photo CD will
not play.
•
Logo:
•
•
•
Single layer, dual layer or Hybrid layer
12cm (5in.) or 8cm (3in.) discs
Digital audio (DSD)
Super Audio CDs are divided into tracks.
Audio CD compatibility:
DVD-Video compatibility:
•
Logos:
•
Logos:
•
•
•
12cm (5in.) or 8cm (3in.) discs
•
•
•
Single-sided or double-sided discs
Single layer or dual layer discs
Linear PCM digital audio
Audio CD, CD-R* and CD-RW* formats
Dolby Digital, DTS, MPEG or Linear PCM digital
CDs are divided into tracks.
audio
*This unit can play CD-R and CD-RW discs recorded
in Audio CD or Video CD format, or with MP3 audio
files or Windows Media audio files or picture files or
DivX files.
•
MPEG-2 digital video
Discs are generally divided into one or more titles.
Titles may be further subdivided into chapters.
*Some copy-controlled CDs may not conform to
DVD-Audio compatibility:
official CD standards. They are special discs and may
not play on the VC6001.
•
Logos:
*The VC6001 does not support the non-DVD side
•
•
•
•
Single sided discs
of a Dual Disc.
Single layer or dual layer discs
Video CD compatibility:
Linear or packed PCM digital audio
Some discs may contain MPEG-2 video, and
•
Logo:
Dolby Digital, DTS or MPEG digital audio
•
•
•
12cm (5in.) or 8cm (3in.) discs
Discs are generally divided into one or more groups.
Groups may be further subdivided into tracks.
MPEG-1 digital audio
MPEG-1 digital video
DVD-R compatibility:
Video CDs are divided into tracks.
This unit can play DVD-R discs. Please note the
following points when using these discs:
Super VCD compatibility:
•
Logo:
•
Logo:
•
This unit can play DVD-R discs recorded as DVD-
Video format.
•
•
•
12cm (5in.) or 8cm (3in.) discs
MPEG-1 digital audio
MPEG-2 digital video
DVD-RW compatibility:
Super VCDs are divided into tracks.
This unit can play DVD-RW discs. Please note the
following points when using these discs:
•
Logo:
•
This unit can play DVD-RW discs recorded as
DVD-Video format, and DVD-VR format.
•
DVD-RW discs that were recorded with copy-
once only permission can be played.
DVD+R/+RW compatibility:
•
•
Logo:
This unit can play DVD+R/+RW discs. Please
note the followings points when using these
discs.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start
1
•
This player can not play the disc contents
protected by Windows Media Digital Right
Management (DRM).
DVD-Video regions
JPEG compatibility information
•
•
While this player is designed to be able to
handle image data recorded in JPEG format,
no assurances are given that the player will be
able to display image data recorded in all JPEG
formats.
This player can not display progressive JPEG
images.
All DVD-Video discs carry a region mark
on the case somewhere that indicates
which region(s) of the world the disc is
compatible with. Your DVD player also has
a region mark, which you can find on the
rear panel. Discs from incompatible regions
will not play in this player. Discs marked
ALL will play in any player.
•
•
This player can not display HD JPEG images.
Always be sure to specify a file extension of “.JPG”
or “JPEG” for JPEG files. The file will not be able
to be displayed if a file extension other than “.JPG”
or “JPEG” is specified or if no file extension is
assigned to the file. (Note that this means that
JPEG files created on a Macintosh will not be able
to be displayed as is.)
•
Depending on the file size and compression
ratio, some JPEG pictures cannot be displayed
correctly.
General information
•
•
•
This player can recognize in total about 650 files
per folders and 300 folder per disc for MP3/
DivX/WMA.
DivX compatibility information
When writing MP3/WMA/JPEG/DivX files to CD-
•
A file with an extension of “.avi” or “.divx” is called
a DivX file.
R/RW discs, always be sure to set the writing
format to ISO 9660 Level 1.
•
Maximum 30 characters can be displayed on the
display on the Front panel and TV screen.
For MP3 and WMA files recorded in Variable Bit
Rate (VBR), the unit may not display the actual
elapsed time.
•
CaMutaxioimnu!m 4 Gbyte of file size can be displayed.
•
File should be MPEG1 Audio Layer 3 format and
MPEG2 format.
MP3 compatibility information
•
•
•
Files should be MPEG1 Audio Layer 3 format.
The sampling rate is 8 kHz to 48 kHz, but it is
depends on the bit rate. Incompatible files will
not play.
•
•
DVD R/RW and CD-R/RW discs recorded using
a personal computer or a DVD or CD recorder
may not play if the disc is damaged or dirty, or if
there is dirt or condensation on the player’s lens.
Audio encoded at 128 kbps should sound close
to regular audio CD quality. Although this player
will play 32 kbps to 320 kbps, but it is depends
on the sampling rate.
If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play because
This player is compatible with ID3 ver.1.1 Tag.
of the settings of the application software used
But the information display on the display on the
to create the disc. (Check with the software
publisher for more detailed information.)
Front panel and TV screen is only ID3 ver. 1.0
Tag.
•
There may be times when it is impossible
•
•
•
•
Maximum 30 characters can be displayed on the
display on the Front panel and TV screen.
to replay a CD-R/RW disc because of the
characteristics of the disc being used or because
of dirt or scratches on the disc.
This player cannot play DVD-R/RW discs with
recorded MP3 music data.
•
•
•
Unfinalized DVD-R/RW discs cannot be played.
This player only plays tracks that are named
containing the file extension “.mp3” or “.MP3”.
Unfinalized CD-R/RW discs cannot be played.
For more information on using DVD-R/RW and
This player is not compatible with multi-session
CD-R/RW discs, see “Handling discs” on page
discs. If you try and play a multi-session disc,
53.
only the first session will be played.
•
Never try to replay anything other than a music
CD (CDA format) or a CD-R/RW on which MP3
and/or JPEG files have been stored. Depending
on the type of file, there may be times when
doing so will result in problems or erroneous
operation.
WMA compatibility information
•
•
The sampling rate is 44.1 kHz (bit rate: 64
kbps-192 kbps) and 48 kHz (bit rate: 128
kbps-192 kbps).
This player only plays tracks that are named with
the file extension “.wma” or “.WMA”.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Connecting Up
Easy setup
Important
While a connected component is turned on,
do not unplug the power cord of this DVD
player from the wall outlet. The speaker may be
damaged.
This easy setup is the minimum set of
connections you need to start watching
DVD-Video discs. Both sound and picture
are fed directly to your TV using the
supplied audio/video cables. For other
possible connections, see pages 11 and 12.
•
•
Before making or changing any rear panel
connections, make sure that all components are
switched off and unplugged from the wall outlet.
Connect to a
Connect to a pair of stereo
RS-232C terminal/
1
2
composite video
audio inputs on your TV using
FLASHER IN
input on your TV
the supplied Audio/Video cable.
Control terminal
using the supplied
You can connect a subwoofer to
the SUBWOOFER Jack.
for use by custom
installers.
Audio/Video
cable.
CENTER
L
L
R
R
COAX.
OPT.
AC IN
REMOTE CONTROL
FRONT
HDMI
SUB W.
SURR.
MIXED 2CH
AUDIO OUT
DIGITAL
IN
RS-232C
FLASHER
IN
INT. EXT.
OUT
VIDEO
VIDEO OUT
S1
CR
CB
Y
Ver1.1
COMPONENT
See Note:
Plug into a
standard AC wall
outlet.
EXT.
INT.
3
Remote Switch
Connecting audio/video cables
Note
Be sure to insert each
•
•
When connecting to a standard TV, select
plug fully for the best
4:3 LETTER BOX or 4:3 PAN SCAN in the TV
Aspect setting (see page 44).
connection. The plugs
and jacks are color-coded
to make connection
easier.
Connect the video output of the player directly
to your TV. Because the player is designed
to support an Analog Protection System copy
protection, there are cases when proper playback
will not be possible if the player is connected to
the TV through a VCR and images are recorded
and played on the VCR.
Connecting system control cables
By connecting this DVD player to another
Marantz audio component using a supplied
system control cable, you can remotely
operate the components as a single system.
•
•
The player’s video output and S1 output are not
be progressive.
Remote switch
When using this DVD player independently, set
this switch to INT. (INTERNAL). When using this
DVD player in a system with a Marantz receiver
equipped with a remote sensor, set the switch to
EXT. (EXTERNAL). Change the switch setting
using a pen with a sharp tip etc.
•
•
When connecting to a component with a
remote sensor, be sure to connect the REMOTE
CONTROL IN jack of this DVD player to
the REMOTE CONTROL OUT jack of the
component with the remote sensor.
When connecting to component which is
not equipped with a remote sensor, be sure
to connect the component to the REMOTE
CONTROL OUT jack of this DVD player.
•
Flasher Input
This is used when controlling components
from different rooms with a keypad or other
input device. Set the remote switch to EXT.
(EXTERNAL) when using a flasher input.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Up
2
Home theater video connections
This player outputs video in a number
of different ways. Choose the one most
suitable for your system using the guide
below.
Important
•
•
Before making or changing any rear panel
connections, make sure that all components are
switched off and unplugged from the wall outlet.
While a connected component is turned on,
do not unplug the power cord of this DVD
player from the wall outlet. The speaker may be
damaged.
If your TV has a component video input, we
1
recommend using it to connect directly to the
COMPONENT VIDEO OUT of this player.
Use the standard 3-jack component video
output.
CENTER
L
L
R
R
COAX.
OPT.
AC IN
REMOTE CONTROL
RS-232C
FRONT
HDMI
SUB W.
SURR.
MIXED 2CH
AUDIO OUT
DIGITAL
IN
FLASHER
IN
INT. EXT.
OUT
VIDEO
VIDEO OUT
S1
CR
CB
Y
Ver1.1
COMPONENT
If a component input
If your TV and projector have
Plug into a standard
AC wall outlet.
3
4
2
is not available to you,
a HDMI terminal for Video and
connect this player to
Audio Input, we recommend
your TV or AV receiver
using it to connect directly to
the HDMI out of this player.
using either the VIDEO
or S1 jacks.
S-Video or composite video?
Note
S-Video should give a better picture, so if
you have an S-Video input, use it. S-Video
cables are available from any good audio/
visual dealer.
•
The HDMI output of this unit can be connected
to a DVI jack on a TV or other device using a
conversion adapter. In this case, it is necessary
to use a TV or display with an HDCP-compatible
DVI input.
•
•
•
There may be no image output if connected to
Connecting HDMI cables
a TV or display that is not compatible with the
above format.
With an HDMI cable, both uncompressed
video data and digital audio data (e.g.,
LPCM or bit stream data such as Dolby
Digital, DTS, MPEG data or DVD Audio
Multi channel) can be transmitted with just
a single connector.
Refer to the instruction manual of the TV or
display to be connected to this unit for detailed
information regarding the HDMI terminal.
When connecting a progressive input TV with the
component output of the player, select ON in
the Progressive setting (see page 44).
By transmitting DVD image data directly as
digital data without it being first converted
into analog format, it becomes possible to
provide the very finest in image quality (see
pages 6, 40, 41, 46).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Connecting Up
Home theater audio connections
This player outputs multi-channel audio
in digital form. Check the manual for your
amplifier/receiver to see what equipment it
is compatible with (especially which digital
formats such as Dolby Digital, DTS, etc. It
can decode).
Important
•
•
Before making or changing any rear panel
connections, make sure that all components are
switched off and unplugged from the wall outlet.
While a connected component is turned on,
do not unplug the power cord of this DVD
player from the wall outlet. The speaker may be
damaged.
If your amplifier has 5.1 channel analog
If your amplifier has stereo inputs only,
1
2
inputs, connect them here. Connect
connect them here. You can connect a
subwoofer to the SUBWOOFER Jack.
to the L (left)/R (right), SURR.L/.R
(SURROUND L/R), CENTER and SUB
WOOFER inputs of your amplifier.
CENTER
L
L
R
R
COAX.
OPT.
AC IN
REMOTE CONTROL
IN
FRONT
HDMI
SUB W.
SURR. MIXED 2CH
AUDIO OUT
DIGITAL
RS-232C
FLASHER
IN
INT. EXT.
OUT
VIDEO
VIDEO OUT
S1
CR
CB
Y
Ver1.1
COMPONENT
Plug into a standard
AC wall outlet.
Connect to the coaxial or
4
3
optical input of your amplifier
if it has digital inputs.
the protective shutter will open and you
should hear it click into position when fully
inserted. Be careful that you do not force
the plug, because this could result in dam-
Connecting analog audio cables
Be sure to fully insert each plug for the
best connection. The plugs and jacks are
color-coded to make connection easier.
age to the protective shutter, the cable, or
the unit itself.
Connecting coaxial cables
Use an interconnector with a pin-type
(also called RCA
Note
COAX
•
If you listen to multichannel DVD-Audio through
one of the digital outputs, it will be downmixed
to stereo. Also, high sampling rate DVD-Audio
or phono) plug on
each end to connect
up digital coaxial-
(192 kHz or 176.4 kHz) will be downsampled
to 96 kHz, 88.2 kHz, 48 kHz or 44.1 kHz,
type jacks. Make
depending on the disc. Multi channel and high
sampling rate DVD-Audio are only available
through the analog outputs.
sCuorentnhaetctthienpgluogpistical cables
pushed fully home.
•
All DVD-Audio and all Super Audio CD audio are
output only through the analog outputs. (see
page 39)
Optical intercon-
OPT
nects only plug in
one way, so make
sure the plug is
correctly lined up
with the jack before
insertion. When
inserting the plug,
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Controls & Displays
1
Front panel
4
2
3
SUPER AUDIO CD/DVD CHANGER VC6001
OPEN/CLOSE
STANDBY
POWER ON/STANDBY
DISC
3
PLAY
STOP
PAUSE
1
2
4
5
SA-CD
MULTI CH
HDMI
DVD AUDIO
AUDIO EX.
5
6
7 8
9
0 -= ~ !
@
#
$
1
2
3
STANDBY indicator
11 HDMI indicator
•
Lights when the unit is in standby.
•
When the connected device is HDMI/DVI
compatible, the light flashes red.
Disc tray
12 HDMI – page 46
•
Place the disc here.
•
•
The HDMI on/off state toggles when pressed
MULTI-CH indicator
for three seconds or more. When on, the HDMI
indicator is lit.
•
Lights when playing a multi-channel audio source.
0
4
5
(OPEN/CLOSE)
Pressing this button while HDMI is enabled
displays the current resolution. Pressing this
button again while the resolution is displayed
allows you to select the resolution in the
sequence below:
•
Press to open and close the disc tray.
POWER ON/STANDBY
•
Press to turn the power on, and press it again to
enter STANDBY mode.
6
DISC (1, 2, 3, 4, 5)/LEDs – page 15
480p 576p 720p 1080 i 1080 p
Æ
Æ
Æ
Æ
Æ
•
Use to select and directly play back the preferred
480p
disc.
4 1
13
14
/
•
Each LED flashes green when the button is
selected.
•
Press to skip reverse title/group, chapter, or track.
You can also press and hold this button for Fast
Reversed.
7
8
9
SA-CD indicator
•
Lights when the player detects a Super Audio CD
¡ ¢
/
signal.
•
Press to skip forward title/group, chapter, or
DVD-AUDIO indicator
track. You can also press and hold this button for
•
Lights when the player detects a DVD-AUDIO
Fast Forward.
signal.
3
•
15
16
17
(PLAY)
Display
Begins playing the disc play.
•
Operation indications are displayed here.
7
•
(STOP)
10 AUDIO EX
Stops playing the disc play.
(PAUSE)
•
•
Lights when the AUDIO EX is activated using the
8
•
AUDIO EX button on the remote control.
Pauses playing the disc play.
The sound quality of analog audio output is
improved by turning off analog video signal
output and the front panel display.
•
It is applied to CDDA, Super Audio CD, DVD
Audio and DTS CD in Play mode.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Controls & Displays
1
5
REPEAT – pages 22, 29
Remote control
A–B – page 23
6
7
ANGLE – pages 24, 30
% fi
INPUT ( / ) button – These buttons can
switch between devices compatible with
MARANTZ receivers. Refer to the receiver
instruction manual for further details.
2
3
4
!
@
#
•
Applicable models: PM-11S1, PM-15S1,
5
$
PM6001, PM7001, PM8001, SR9600.
(These models may not be handled depending on
the area.)
6
%
^
Non-applicable models: MARANTZ Amplifiers
and receivers which had released before 2006,
including PM-14, PM-17 and PM4001 except
above models.
&
7
8
*
(
)
_
4
¢
8
9
(PREV.)/
(NEXT)– Skip – pages
) for Fast Forward.
16, 17, 19, 20, 29, 30, 50
•
Allows you to search forward/backward through a
disc. Use to skip the title, chapter or track.
4
9
0
Press and hold (
) for Fast Reversed.
•
•
+
¢
Press and hold (
SCAN – pages 18, 19
-
=
10 TOP MENU (TOP-M)/RETURN – page 17
2 3 5 ∞
11 Cursor (
/
/
/ ) / ENTER button
¡
™
12 DISPLAY (DISP.) – page 26
13 DISC SKIP – Selects another disc – page 15
14 POWER – Switches the player on or into
standby – page 15
15 SOUND MODE– Selects Audio out mode
and change the Super Audio CD Play back
~
area – pages 25, 38
16 PAGE – Turns the pages of DVD-Audio still
pictures – page 22
17 RANDOM – page 23
18 AU D I O – Changes the Hybrid Super Audio
CD Play back layer – page 25
19 SUBTITLE – pages 24, 32
5 ∞
20 VOLUME ( / ) button – These buttons
1
2
AUDIO EX – Press to turn AUDIO EX off
can adjust the volume of devices compatible
with MARANTZ receivers. Refer to the
receiver instruction manual for further
details.
and on
•
•
The sound quality of analog audio output is
improved by turning off analog video signal
output and the front panel display.
21 MUTE button – This button can activate the
mute function of devices compatible with
MARANTZ receivers. Refer to the receiver
instructions for further details.
3
HDMI video output cannot be switched off.
OPEN/CLOSE – Disc tray open/close –
page 15
3
4
ZOOM – pages 25, 30
22
23
24
(PLAY) – pages 15, 16, 20, 21, 29, 31, 32
(PAUSE) – pages 16, 21
HDMI – page 46
8
7
•
•
The HDMI on/off state toggles when pressed
for three seconds or more. When on, the HDMI
indicator is lit.
(STOP) – pages 16, 30, 31, 33, 48
25 MENU – pages 17, 19, 24
26 SETUP – pages 33, 35, 38, 43, 48
27 Number buttons
Pressing this button while HDMI is enabled
displays the current resolution. Pressing this
button again while the resolution is displayed
Note
allows you to select the resolution in the
sequence below:
•
•
HDMI ON is set when the unit is shipped from
the factory.
480p 576p 720p 1080i 1080 p
Æ
Æ
Æ
Æ
Æ
Set HDMI under the DVD Setup Menu to use
480p
HDMI functions (see pages 40, 41, 46).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
4
Playing discs
The basic playback controls for playing
discs are covered here. Further functions
are detailed in the next chapter.
Note
•
Throughout this manual, the term “DVD” means
DVD-Video, and DVD R/RW. If a function is specific
to a particular kind of DVD disc, it is specified.
1
Press the POWER ON/STANDBY button
on the front panel or POWER button on
the remote control.
If you are playing a DVD or Video CD, also turn on
your TV and make sure that it is set to the correct
video input.
2
3
Press OPEN/CLOSE to open the disc tray.
Load a disc.
Place the chosen discs in the tray, printed side up.
(If you’re loading a double-sided DVD disc, load it
with the side you want to play face down.)
3
4
Press (PLAY) to start playback.
The disc tray closes and playback starts automatically
and in sequence for all of the discs loaded in the tray.
To play back a specific disc directly, press DISC SKIP
repeatedly on the remote control or press DISC
(1, 2, 3, 4, 5) on the front panel (see page 13).
If you are playing a DVD or Video CD, a menu may
appear (see page 17).
Note
•
•
For one-sided, two-layer discs containing movies, etc.,
there may be a short image stoppage at the point
where the layers change. This is not a malfunction.
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Getting Started
Basic playback controls
Button
What it does
3
Starts playback.
In title menu, it functions as the Enter key.
8
Pauses a disc that’s playing.
Each time the button is pressed, a new
frame will appear.
7
4
Stops playback.
Skips to the start of the current track or
•
chapter, then to previous tracks/chapters.
Press and hold for Fast Reversed.
•
¢
Skips to the next track or chapter.
Press and hold for Fast Forward.
•
•
Numbers
Playback starts from the selected track/chapter
Resuming npumlabyerb. ack from the last
ENTER
Select the current menu option.
stopped point
This DVD system is able to resume disc
playback from its last stopped point (only
possible for the last 10 discs that were
recorded without a menu).
1
2
Load one of the last 10 discs played.
While “LOADING” appears on the display
3
start playback from
panel, press PLAY to
the last stop point.
To cancel the resume mode
7
•
Press twice.
Important
While using the DVD playback controls, you may see
the
mark displayed on-screen. The
mark means
that the operation is not allowed by the player and
disc.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
4
Navigating DVD disc menus
Many DVD discs contain menus. Sometimes
these are displayed automatically when you
start playback; others only appear when you
press MENU or TOP-M.
Note
•
Some DVD-Audio discs feature a “Bonus Group”. To
access this group you have to input a password that
you can find on the disc’s packaging (see page 35).
Button
What it does
TOP-M
Displays the “top menu” of a DVD disc. This
varies with the disc.
MENU
Displays a DVD disc menu—this varies with
the disc and may be the same as the “top
menu”.
RETURN
Returns to the previously displayed menu
screen.
Cursor
Moves the cursor around the screen.
Selects the current menu option.
2 3 5 ∞
(
/
/
/
)
ENTER
NNuamvbiegrsating Video CD PBC menus
Selects a numbered menu option
(some discs only).
Some Video CDs have menus from which you
can choose what you want to watch. These
are called PBC (Playback control) menus.
Press the MENU to turn the PBC function on
or off.
Note
•
Some discs don’t allow PBC menus.
Button
What it does
RETURN
Numbers
ENTER
4
Displays the PBC menu.
Selects a numbered menu option.
Selects the current menu option.
Displays the previous menu page
(if there is one).
¢
Displays the next menu page
(if there is one).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Playing Discs
Preview function
Video-CD
SVCD
DVD-Video
CD
1
2
Press SCAN.
SVCD
VCD
SELECT DIGEST TYPE
TRACK DIGEST
DISC INTERVAL
TRACK INTERVAL
DVD
SELECT DIGEST TYPE
TITLE DIGEST
TITLE INTERVAL
SELECT DIGEST TYPE
GROUP DIGEST
TRACK DIGEST
GROUP INTERVAL
TRACK INTERVAL
5 ∞
Use the
/
keys to select one of the
following options and press ENTER.
This option is only available during playback mode.
•
•
TRACK/TITLE/CHAPTER DIGEST – View six
different TRACK/TITLE/CHAPTER on one screen
each time. This allows you to have a quick glance
at all the TRACK/TITLE/CHAPTER on the disc.
DISC INTERVAL – View the whole disc in six
thumbnail pictures. It divides a disc into six
portions at regular intervals and displays them on
one screen.
•
•
TRACK INTERVAL – View the content of a single
track in six thumbnail pictures. It divides a single
track into six portions at regular intervals and
displays them on one screen.
Introduction
• Many of the functions covered in this
chapter apply to DVD discs, Video CDs
and CDs, although the exact operation
of some varies slightly with the kind of
disc loaded.
TITLE INTERVAL/CHAPTER INTERVAL – View
the content of a single TITLE/single CHAPTER in
six thumbnail pictures. It divides a single TITLE/
CHAPTER into six portions at regular intervals
and displays them on one screen.
• When playing DVD discs, if the icon
appears on-screen when you try to use
a particular function, either the player
or the disc doesn’t allow the use of that
function.
•
GROUP/TRACK DIGEST – GROUP/TRACK
DIGEST will playback the first 3 to 4 seconds of
every title/chapter available in the disc/current
title.
• When playing Video CDs, some of the
functions are not available in PBC mode.
If you want to use them, press the
MENU to turn the PBC function off (see
page 17).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
5
•
GROUP/TRACK INTERVAL – GROUP/TRACK
INTERVAL will divide the current title disc/chapter
time by 6 and playback the first 3 to 4 seconds of
each of these intervals.
2 3 5 ∞
• Use (
/
/
/ ) to select a track or use
the numeric buttons to enter the selected
track number.
• To go to the previous or next page, press
4 ¢
/
.
• Press ENTER on the selected thumbnail
picture to start playback from there.
• To return to the main menu, select MENU
on the screen and press ENTER.
3
To exit the preview menu, select EXIT on
the screen and press ENTER.
For CD
• At stop mode, press SCAN on the remote
control. Each track will be played for a few
seconds.
Note
”
•
•
You can select “Track Interval only during playback
with PBC off.
Some discs don’t allow the Scan mode.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Playing Discs
Fast Forward/Fast Reverse
DVD
MP3
Super Audio CD Video-CD
CD
DivX
WMA
The video images on DVD and VCD can be
viewed as a Fast Forward and Fast Reverse
with no sound.
In case of CD, the sound can be listened as a
Fast Forward and Fast Reverse with sound.
Viewing in Fast Forward/Fast Reversed
¢
Press and hold
(NEXT) during play.
• Fast Forward is engaged.
• During Fast Forward, the speed of play
back can be adjusted from x2 speed to
¢
x32 speed in 5 steps using
(NEXT).
4
Press and hold
(PREV) during play.
• Fast Reverse is engaged.
• During Fast Reverse, the speed of play
back can be adjusted from x2 speed to
4
x32 speed in 5 steps using
(PREV).
3
To return to normal play back press (PLAY)
to normal play back.
Note
•
The sound is muted during fast forward/reverse
scanning of DVD/VCD/Super Audio CD.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
5
Viewing a Paused Picture
8
Press (PAUSE).
Viewing slow playback
With this function, DVDs can be viewed in both forward
and reverse direction. Video CD can only be moved in
the forward direction.
∞
Press (down) during play.
•
•
Slow playback is engaged.
During slow playback, the speed of playback can be
adjusted from 1/2 normal
1/2 – 1/4 – 1/8 – 1/16
playback speed to 1/16
normal playback speed in
∞
4 steps using (down).
5
Press (up) during play.
•
•
Slow playback in the reverse direction is engaged.
During slow playback, the speed of playback can be
adjusted from 1/2 normal playback speed to 1/16
normal playback speed in
5
4 steps using (up).
1/2 – 1/4 – 1/8 – 1/16
To return to normal playback
When the picture is paused or during slow playback,
3
pfrreasmsineg at(aPLtAiYm) erestores normal playback operation.
Step Motion playback: Viewing one
With this function, DVDs and Video CDs can only be
moved in the forward direction.
8
Press (PAUSE).
Each time the button is pressed, a new frame will
appear.
To return to normal playback
3
When viewing Step Motion playback, pressing (PLAY)
restores normal playback operation.
Note
•
•
There is no sound picture playback is paused or
during slow playback, or when advancing one frame
at a time.
Still Frame/Slow Play/Frame Advance
Playback
Pausing picture, slow play, or Step Motion playback
DVD-Video Video-CD
may not be possible with certain titles. In this case,
the
mark is displayed.
The video images on DVD and Video CD
can be viewed as a still frame, played back
at slow speeds and even advanced frame by
frame (Forward only).
•
A short sound may be noticeable when switching to
slow playback.
8
•
When you press the (PAUSE) button during slow
playback, it may advance a few frames past the
frame where you want it to stop.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Playing Discs
Using the Repeat Play
DVD-Video DVD-Audio Super Audio CD Video-CD
CD
MP3
JPEG
DivX
WMA
You can set the player to repeat individual
tracks on CDs or Video CDs, chapters or
titles on DVD discs, or the whole disc. It’s
also possible to loop a section of a disc.
You can’t use any repeat mode or looped
play with a Video CD playing in PBC mode.
Note
•
Some discs don’t allow the Repeat function.
Press REPEAT during playback to select a
repeat mode.
Each press switches the repeat mode:
DVD-Video
•
•
•
•
CHAPTER REPEAT
TITLE REPEAT
DISC REPEAT (repeats the entire disc)
ALL DISC REPEAT (repeats all discs loaded in the
tray)
•
OFF
DVD-Audio
•
•
•
•
TRACK REPEAT
GROUP REPEAT
DISC REPEAT (repeats the entire disc)
ALL DISC REPEAT (repeats all discs loaded in the
tray)
•
OFF
Video-CD
CD
MP3
WMA
Super Audio CD
Using the page
JPEG
DivX
DVD-Audio
•
•
•
TRACK REPEAT
Some DVD-Audio discs contain
information pages for photo galleries,
artist biographies, lyrics, etc.
DISC REPEAT (repeats the entire disc)
ALL DISC REPEAT (repeats all discs loaded in the
tray)
Press the PAGE button on the remote
•
OFF
control during Playback. You may select the
image you want by moving the cursor button
2 3
Note
(
/
).
•
•
Any existing RANDOM or Repeat A-B mode will be
cancelled and Repeat mode will be activated.
When only one disc is available in the disc tray, it
will be continuously played when ALL DISC REPEAT
is selected.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
5
Note
•
•
There may be a slightly difference between point A
and the location where playback actually resumes
UsdinepgentdhinegRonatnhde odimsc. (SHUFFLE) Play
After Repeat A-B is exited, any existing Repeat or
RANDOM modes will be restored.
CD
MP3
DivX
WMA
JPEG
Use the random play function to play tracks
in a random order.
You can’t use random play with DVD-VR
mode.
During playback, press RANDOM (SHUFFLE)
repeatedly to select between SHUFFLE DISC,
SHUFFLE ALL DISC and SHUFFLE OFF.
•
The selected mode appears in the display
for several seconds.
In SHUFFLE DISC mode, all tracks on the
disc currently playing are played in random
order.
•
For Hybrid Super Audio CDs, tracks on the Super
Audio CD layer are played by default.
In SHUFFLE ALL DISC mode, tracks from all
discs are played in random order:
•
•
If the disc currently playing is in Super Audio CD
®
(Super Audio CD layer), MP3, WMA or DivX ,
tracks on the disc currently playing are played in
random order. When all the tracks on that disc have
been played, shuffle playback continues with the
next disc.
If the disc currently playing is a CD layer of Super
Audio CD, the CD layer of Super Audio CD will be
played.
Looping a section of a disc
DVD
MP3
Super Audio CD Video-CD
CD
DivX
WMA
Note
•
•
Any existing Repeat or Repeat A-B modes will be
cancelled and RANDOM mode will be activated.
1
2
Press A-B once at the start of the section
you want to repeat, then again at the end.
Only discs of the same type are shuffled/played.
Playback immediately jumps back to the start point and
plays the loop round and round.
•
On a DVD disc, the start and end points of the
loop must be in the same title/chapter.
•
On a Video CD/CD disc, the start and end points
of the loop must be in the same track.
To resume normal playback, press A-B
again.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Playing Discs
Switching Camera Angles
DVD-Video
Some DVD-Video discs feature scenes shot
from two or more angles. Check the disc box
for details: it should be marked with a
icon if it contains camera-angle scenes.
•
To switch the camera angle, press ANGLE.
Note
•
Depending on the disc, this feature may not work.
Switching the Subtitle Language
DVD-Video
DivX
Many DVD-Video discs or DivX discs have
subtitles in one or more languages. The
disc box will usually tell you which subtitle
languages are available. You can switch the
subtitle language at anytime during playback.
•
•
To display/switch the subtitle language,
press SUBTITLE repeatedly.
The current subtitle language is shown on-screen.
To set subtitle preferences, see page 48.
Note
•
•
In some cases, a subtitle can not be turned off even
if you select “OFF”.
Some discs allow you to change subtitles only via
the disc menu. In that case, press the MENU button
and change the settings.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
5
Switching the audio channel
Depending on the disc, this feature may not
work.
Video-CD
On Video CDs you can switch between
stereo, just the left channel, just the right
channel or Mixed Mono.
•
To switch the audio channel, press AUDIO
repeatedly.
The current playback channel(s) are indicated on-
slacryeeenr.
Switching Super Audio CD Playback
Super Audio CD
•
On a hybrid disc (with Super Audio CD and CD layers),
the player will always start playing the Super Audio CD
layer.
•
To switch between the Super Audio CD layer and the
CD player, press AUDIO while playback is stopped.
Switching Super Audio CD Playback
area
Super Audio CD
•
To Switch between the Super Audio CD multi-channel
aUndsSinupgertAhuediZo CoDosmterFeounarceatsiobynpressing SOUND
MODE.
DVD-Video DVD-Audio Video-CD
JPEG
1
2
During play or pause mode, press the
ZOOM button on the remote control to
zoom in x2, x3, x4, x1/2, x1/3, x1/4,
Normal in order for DVD-Video or VCD and
100%, 125%, 150%, 200%, Normal in
order for JPEG.
Switching the Audio Language
DVD-Video DVD-Audio
When playing a DVD-Video disc recorded
with dialog in two or more languages, you
can switch the audio language at anytime
during playback.
5 ∞ 2 3
Use the cursor buttons ( / /
/
) to
•
•
To display/switch the audio language, press
AUDIO repeatedly.
select the part of the screen you want to
zoom in on.
The current audio language is shown on-screen.
To set audio language preferences, see page
Note
48.
•
•
•
Zoom play cannot be used on some discs.
Zoom will not operate properly for some scenes.
Zooming may cause image deterioration or shaking.
Note
•
•
Depending on the disc, there are cases in which the
audio language cannot be switched during play. In
this case, make changes using the DVD menu.
It may take a few seconds till a selected Audio
Language is audible.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Playing Discs
Play back Information
This DVD system can display the disc
playback information (for example, title
or chapter number, elapsed playing time,
audio/subtitle language) and a number of
operations can be done without interrupting
disc playback.
DVD-Video Video-CD
1
During playback, press DISP.
•
A list of available disc information appears
on the TV.
DVD
MENU
TITLE
01/07
01/30
2CH
CHAPTER
AUDIO
ENG
SUBTITLE
BITRATE 00
OFF
TITLE ELAPSED 0:00:23
Video-CD
SVCD
MENU
TRACK
DISC TIME
01/01
1:01:14
TRACK TIME 1:01:14
REPEAT
OFF
BITRATE 75
TOTAL ELAPSED 0:00:20
Title/Chapter/Track selection
DVD-Video Video-CD
5 ∞
1
2
Press
/
to highlight “Title” / “Chapter”
or “Track”, then press ENTER to access.
Use the numeric keypad (0-9) to enter a
valid number (e.g. 04/05).
Audio/Subtitle
DVD-Video
5 ∞
1
2
Press
Press
/
to highlight “Audio” or
to select one language, then
“Subtitle”, then press ENTER to access.
The Audio or Subtitle menu appears on the TV.
5 ∞
/
press ENTER to confirm.
The current audio or subtitle language will be changed
to the selected language.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
5
Angle
Time Search
DVD-Video
DVD-Video Video-CD
5 ∞
5 ∞
1
2
3
Press
/
to highlight “Angle”, then press
1
2
Press
/
to highlight “TT Time”/“CH
ENTER to access.
Time”/“Disc Time” or “Track Time”, then
press ENTER to access.
Use the numeric keypad (0-9) to enter in a
valid number.
Use the numeric keypad (0-9) to enter a
valid time (e.g. 0:34:27).
Press ENTER to confirm.
The playback skips to the chosen time.
Playback will go to the selected angle.
Repeat
Time Display
DVD-Video Video-CD
DVD-Video Video-CD
5 ∞
1
2
Press
/
to highlight “REPEAT”, then
5 ∞
1
Press
/
to highlight “Time Disp.”, then
press ENTER to access.
press ENTER to access.
5 ∞
Press
/
to select the desired repeat
The following display types appear on the TV,
depending on the disc in the player.
mode, then, press ENTER to access.
For DVD discs:
TITLE Elapsed - elapsed playing time of current Title;
TITLE Remain - remaining playing time of current Title;
CHAPTER Elapsed - elapsed playing time of current
Chapter;
CHAPTER Remain - remaining playing time of current
Chapter;
For VCD/SVCD discs:
Total Elapsed - elapsed playing time of current Disc;
Total Remain - remaining playing time of current Disc;
Single Elapsed - elapsed playing time of current Track;
Single Remain - remaining playing time of current Track;
5 ∞
2
Press
/
to select the desired time
display mode, then press ENTER to display
the selected item.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Playing Discs
Group/Track Selection and time search
Time
CD
DVD-Audio
Press DISPLAY (DISP.) repeatedly during
playback to change the displayed disc time
information.
Each time you press DISPLAY, the TV display
changes as follows, and the time display
changes as follows:
Display Example:
TOTAL ELAPSED
SINGLE REMAIN
TOTAL REMAIN
GROUP 01/05 TRACK 01/15 0:10:00
SINGLE ELAPSED
GROUP 01/05 TRACK 01/15
GROUP 01/05 TIME 0:10:00
TRACK 01/15 TIME 0:10:00
1
2
Displays the current group number/total
number, the current track number/total
number and elapsed playing time.
To select a track/group:
2 3
1
2
Use
/
to highlight GROUP or TRACK.
Enter a group/track number using the numeric
keypad (0-9).
3
Press ENTER to confirm the selection, or wait for
about 5 seconds without performing any operation.
3
4
To search for a time in a group:
Enter hours, minutes and seconds from left
to right using the numeric keypad (0-9).
To search for a time in a track:
Enter hours, minutes and seconds from left
to right using the numeric keypad (0-9).
Note
•
When searching for a time in a group/ track, if
you enter a time outside the total time for the
group/track currently being played back,
INVALID is displayed.
INPUT
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
5
00:00
001/014
00:00
MP3_files
Previous
MP3_MUSIC_1
MP3_MUSIC_2
MP3_MUSIC_3
2
3
If the disc main menu contains various
5 ∞
folders, use the
/
keys to select a
desired folder and press ENTER to open
the folder.
5 ∞
Use the
/
keys to select a track/file and
press ENTER to start playback.
•
Playback will start from the selected file
and continue through to the end of the
folder.
During playback, you can;
•
4 ¢
Press
/
to playback another
track/file in the current folder.
•
•
To select another folder from the current
5
disc, press to return to the root menu.
5 ∞
Use the
/
keys to make your selection
and press ENTER to confirm.
Press REPEAT repeatedly to access
various play modes.
•
•
OFF
TRACK REPEAT: One file will be played
repeatedly.
•
DISC REPEAT: All files in one folder will be
played repeatedly.
•
ALL DISC REPEAT: Repeats all discs loaded in
the tray.
Tip
Playing an MP3/DivX/JPEG/
•
•
To skip the folders menu when you load a MP3/
JPEG disc, set the MP3/JPEG NAV setting in the
Preference Setup Page to WITHOUT MENU.
™
Windows Media Audio disc
This DVD system can playback most of the
™
MP3, JPEG and Windows Media Audio files
recorded on a CD-R/RW disc or commercial
CD.
Note
Some discs cannot be played on this player due to
the configuration and characteristics of the disc,
1
Insert a disc.
or due to the condition of recording and authoring
software that was used.
•
The disc reading time may exceed 30
seconds due to the complexity of the
directory file configuration.
•
The disc menu appears on the TV.
•
Playback will start automatically. If not,
3
press (PLAY).
29
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Playing Discs
4 ¢
2
3
Press
/
to display the other pictures
on the previous/next page.
2 3 5 ∞
Use the
/
/
/
keys to highlight one
of the pictures and press ENTER to start
playback.
4
Press the MENU to return to Picture CD
menu.
Zoom picture
1
2
During playback, press ZOOM repeatedly
to select a different zoom factor.
2 3 5 ∞
Use the
/
/
/
keys to pan through the
zoomed image.
Tip
•
This feature is not applicable for DivX discs.
•
Zoom play cannot be used on some discs.
Rotating/flipping the picture
•
2 3 5 ∞
During playback, use the
/
/
/
keys
to rotate/flip the picture on the TV.
5
∞
: Flip the picture vertically
: Flip the picture horizontally
2
3
: Rotate the picture counter-clockwise
: Rotate the picture clockwise
Note
•
Rotate and Flip operations are not supported on
DVD-Audio disc.
Playing a JPEG image file (slide show)
Scan Effect
•
Insert a Picture disc (Kodak Picture CD,
JPEG).
•
Press ANGLE repeatedly to choose a scan effect.
•
Various scan effects appear in the top left corner of
the TV screen.
For a Kodak disc, the slide show will begin
automatically.
For a JPEG disc, the picture menu will appear on the
Note
3
TV. Press PLAY to start the slide-show playback.
Supported file format:
Note
•
•
The file extension has to be “*.JPG” and not “*.JPEG”.
Some discs don't allow the Picture menu.
It can only display DCF-standard still pictures
or JPEG pictures e.g. TIFF. It cannot play back
Preview function
moving pictures, Motion JPEG and other formats,
or pictures in formats other than JPEG, or pictures
associated with sound.
7
1
During playback, press
.
• 12 thumbnail pictures will be displayed on
•
It may require longer time for the DVD system to
the TV.
display the disc content on the TV due to the large
number of songs/pictures compiled into one disc.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
5
Playing MP3/WMA music and JPEG
pictures simultaneously
You can create a musical slide show if the
disc contains both the MP3/WMA music and
JPEG picture files.
1
2
3
Insert an MP3/WMA disc that contains
music and pictures.
Select an MP3/WMA track in the menu and
3
press PLAY to start playback.
During MP3/WMA music playback, use the
2 3 5 ∞
/
/
/
keys to select a picture folder
3
from the disc menu and press PLAY
.
• The picture files will be played back
through to the end of the folder.
4
To stop simultaneous playback, press
7
STOP
.
Tip
•
It is normal to experience an occasional “skip” while
listening to your MP3 disc.
•
It is normal to experience an occasional pixelation
during MP3/DivX playback due to poor clarity of
digital contents during internet downloading.
•
Only the first session of a multi-session CD will be
played back.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Playing Discs
Playing a DivX disc
This DVD system supports the playback of
DivX movies which you can copy from your
computer onto a CD-R/RW, DVD R/ RW
disc (see page 9 for more information).
1
2
Insert a DivX disc.
3
Press PLAY to start playback.
During playback, you can;
• If multilingual subtitles are embedded on
the DivX disc, you can press SUBTITLE
to change the subtitle language while
playing.
Tip
•
Subtitle files with the following file name extensions
(.srt, .smi, .sub, .ssa, .ass) are supported but do not
appear on the file navigation menu.
•
•
•
The subtitle file name has to be the same as the file
name of the movie.
The subtitle can only be displayed up to an average
of 42 characters.
The time search feature is not available during DivX
movie playback.
DviX compatibility information
•
•
•
Support for DivX 3.11, 4.x, 5.x.
Q-pel accurate motion compensation.
Global Motion Compensation (GMC) Playback.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
5
Using the Setup Menu
Before using the player, you should specify
the settings to be used in accordance with
the conditions under which the player is to
be used.
Note that once changed, the settings will be
saved and remain the same even after the
power has been turned off until the settings
are changed again.
The Setup menu gives you access to all the
player’s settings. Press SETUP to display/
leave the menu and the cursor and ENTER
buttons on the remote control to navigate
and select options.
Note
•
The language options shown in the on-screen
display illustrations on the following pages may not
correspond to those available in your country or
region.
1
Press the SETUP button on the remote
control. Select a tab using the cursor
2 3
buttons (
/
).
GENERAL SETUP: Setup of the GENERAL options
~
Ÿ
!
AUDIO SETUP: Setup of the audio options
VIDEO SETUP: Setup of the display and HDMI
Video options
PREFERENCE: Setup of the language, parental, and
⁄
several other options.
5 ∞
2
3
Use the cursor buttons ( / ) on the
remote control to access the different
features.
Press the ENTER button as many times as
necessary to select the desired option.
To make the setup screen disappear after
setting up, press the SETUP button again.
Note
•
Depending on the disc, some Setup Menu
selections may not work.
•
Some settings can not be selected during
playback and RESUME mode of DVD-Video.
7
In that case, press the (STOP) button once or
twice to stop playback completely.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
6
DVD Setup Menu
A black dot ( ) indicates the default setting
z
* It can be set only during STOP.
Page
35
OSD LANGUAGE ꢀENGLISH ESPANOL FRANCAIS
PLAYER MODE
DIVX(R) VOD CODE
DISC LOCK *
DISPLAY DIM
PROGRAM *
ꢀDVD AUDIO DVD VIDEO
35
36
36
36
36
37
37
37
LOCK ꢀUNLOCK
GENERAL
SETUP
ꢀ100% 70% 40%
FTS FDS
ꢀON OFF
SCREEN SAVER
SLEEP
15 MINS 30 MINS 45 MINS 60 MINS ꢀOFF
ꢀON OFF
AUTO STANDBY
Page
38
AUDIO OUT
2 CHANNEL VIRTUAL SURROUND ꢀ5.1 CHANNEL
DIGITAL AUDIO
DIGITAL OUT
40
OFF ꢀALL PCM
LPCM OUT
40
ꢀ48KHZ 96KHZ
HDMI AUDIO OUT
ꢀAUTO MULTI PCM 2CH PCM OFF
SPEAKER SETUP PAGE
40
SPEAKER SETUP
FRONT L/R
ꢀLARGE SMALL
CENTER
OFF ꢀLARGE SMALL
REAR LS/RS
OFF ꢀLARGE SMALL
AUDIO SETUP
LFE(SUBWOOFER) ꢀON OFF
SPEAKER LEVEL
41
FRONT LEFT FRONT RIGHT CENTER LFE REAR LEFT
REAR RIGHT
SPEAKER DISTANCE
FRONT LEFT FRONT RIGHT CENTER LFE REAR LEFT
REAR RIGHT
ꢀOFF 88.2KHZ(X2) 176.4KHZ(X4)
ON ꢀOFF
42
42
CD UPSAMPLING
AUDIO DRC
Page
43
44
44
45
TV SYSTEM
PAL NTSC MULTI
TV ASPECT
4:3 PAN SCAN 4:3 LETTER BOX ꢀ16:9 WIDE
ꢀOFF ON
PROGRESSIVE
PICTURE SETTING
ꢀSTANDARD BRIGHT SOFT
PERSONAL BRIGHTNESS SHARPNESS CONTRAST TINT
45
COLOR
ADV PICTURE
DCDI
OFF ꢀON
GAMMA
VIDEO SETUP
PREFERENCE
CHROMA DELAY
PSCAN FORMAT
HDMI VIDEO
45
46
47
SUPER WIDE 16:9 SQUEEZE ꢀOFF
480P 576P 720P 1080I 1080P
ꢀAUTO
DYNAMIC PICTURE
DVI OUTPUT RANGE ENHANCED ꢀSTANDARD
YCbCr ꢀRGB
47
47
47
COMPONENT
BLACK LEVEL
7. 5 IRE 0 IRE
ON ꢀOFF
CLOSED CAPTION
Page
AUDIO
ꢀENGLISH CHINESE (SIMP) FRENCH SPANISH etc.
48
48
49
SUBTITLE
DISC MENU
PARENTAL
ꢀOFF ENGLISH CHINESE (SIMP) FRENCH SPANISH etc.
ꢀENGLISH CHINESE (SIMP) FRENCH SPANISH etc.
1 KID SAFE 2 G 3 PG 4 PG13 5 PGR 6 R 7 NC17
49
ꢀ8 ADULT
PBC
ꢀON OFF
49
49
49
50
50
51
MP3/JPEG NAV
VR LIST
WITH MENU ꢀWITHOUT MENU
ꢀORIGINAL LIST PLAY LIST
CHANGE
PASSWORD
DIVX SUBTITLE
DEFAULT
ꢀSTANDARD CYRILLIC
RESET
34
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu
6
5 ∞
3
Use the cursor buttons ( / ) to select the
3
desired item, then press the cursor ( ) or
ENTER button.
GENERAL SETUP PAGE
OSD LANGUAGE
PLAYER MODE
DIVX(R) VOD CODE
DISC LOCK
DISPLAY DIM
PROGRAM
SCREEN SAVER
SLEEP
AUTO STANDBY
Note
2
•
Press to go back to the previous menu item.
Press SETUP to exit the menu.
OSD LANGUAGE
The language options are different
depending on your country or region, and
may not match the illustrations shown in the
user manual.
• Default setting: ENGLISH
The OSD (On-Screen Display) language for
this DVD system will remain as you have set
it, regardless of the changes made to the
DVD disc language.
Selects the preferred language for the DVD
system on-screen display menu.
PLAYER MODE
• Default setting: DVD AUDIO
•
•
DVD Audio
Should be selected when the player is to be used as
a DVD audio player.
DVD Video
Should be selected when the player is to be used as
a DVD video player.
Note
•
~
Some DVD-Audio discs contain bonus groups that
are accessible by a four-digit password. In this case,
consult the disc jacket and other packaging for
information.
During play, press DISPLAY twice.
•
The group and track list is displayed on the TV
Setting up the GENERAL SETUP page
Press the SETUP button.
screen.
2 3
Press
/
to select a bonus group, then press
Ÿ
!
⁄
1
2
ENTER.
Enter a four-digit password using the numeric
Select GENERAL SETUP PAGE using the
keypad (0-9), then press ENTER.
2 3
cursor buttons (
/
), then press the
Set will start to playback the bonus group.
ENTER button.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
6
DVD Setup Menu
DivX(R) VOD CODE
PROGRAM
®
MARANTZ provides you with the DivX VOD
Program: Track (FTS)
(Video On Demand) registration code that
DVD-Video DVD-Audio Video-CD
CD
allows you to rent and purchase videos using
®
3
You can play the contents of the disc in the
order you want by programming the playing
order of the tracks. You can store up to 20
tracks.
the DivX VOD service. Press to see the
registration code and press ENTER to exit.
Use the registration code to purchase or
®
rent the videos from the DivX VOD service
and copy the video from your computer onto
a CD-R/RW disc for playback on this DVD
system.
PROGRAM TT(07)/CH(- -)
1
2
3
4
5
TT: CH:
TT: CH:
TT: CH:
TT: CH:
TT: CH:
6
7
8
9
TT: CH:
TT: CH:
TT: CH:
TT: CH:
10 TT: CH:
NEXT
Note
•
•
Any video the downloaded from DivX VOD can
1
2
Use the numeric keypad (0-9) to enter a
valid track/chapter number.
only be played back on this DVD system. For more
The time search function is not available during
2 3 5 ∞
Use the
/
/
/
keys to move the cursor
DivX movie playback.
to the next position.
• If there are more than ten total
programme tracks, select NEXT on the
¢
DISC LOCK
• Default setting: UNLOCK
screen (or press
on the remote
Not all discs are rated or coded by the disc
maker. You can prevent a specific disc from
playing by locking the disc. Up to 40 discs
can be locked.
control) and press ENTER to access the
next programming page.
3
To remove the track/chapter from the
programming menu, select the track/
chapter and press ENTER.
• LOCK – Selects this to block the playback
of the current disc. Subsequent access to
a locked disc requires a six-digit password.
The default password is “111111 ”.
Program: Disc (FDS)
You can playback discs in the order you want
• UNLOCK – All discs can be played.
by programming the discs to be played. You
can store up to 5 discs.
DISPLAY DIM
• Default setting: 100%
To input your favorite discs
Selects the brightness of the DVD system
display panel.
1
2
Use the numeric keypad (0-9) to enter a
valid disc number.
• 100% – Full brightness.
• 70% – Medium brightness.
• 40% – Dimmest display.
2 3 5 ∞
Use the
/
/
/
to move the cursor to
the next position.
To remove a disc
2 3 5 ∞
3
4
5
Use the
/
/
/
to move the cursor to
the disc you want to remove.
Press 0 on the numeric keypad (0-9) to
remove this disc from the program menu.
Once complete, select START on the screen
and press ENTER to start playback.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu
6
• Playback will start from the selected track
under the programmed sequence.
6
To exit the programme menu, select EXIT in
the menu and press ENTER.
Note
•
•
•
•
On Super Audio CD discs, you can program tracks
on the CD layer.
When playing back to program, previous RANDOM
and repeat modes are all cancelled.
When in VCD 2.0 mode (PBC ON mode), this
function does not work.
DVD-VR can not be programmed.
•SCDRVEDE-ANudSioABVoEnuRs Group/Tracks can not be
programmed.
• Default setting: ON
The screen saver prevents damage to the TV
screen by avoiding exposure to a static image
for too long.
• ON – Switches to TV screen saver mode
when playback has been stopped or
paused for more than 15 minutes.
• OFF – Turns off the screen saver function.
SLEEP
• Default setting: OFF
This feature automatically sets the DVD
player in standby mode after the period you
set has elapsed.
You can select from 15, 30, 45, and 60
minutes. Select OFF to cancel the sleep timer
function.
Press ENTER to confirm your selection.
AUTO STANDBY
•
Default setting: ON
If ON is selected, the standby mode is
automatically selected to save power if the
player is left in the Stop mode for about 30
minutes.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
6
DVD Setup Menu
5 ∞
3
Use the cursor buttons ( / ) to select the
3
desired item, then press the cursor ( ) or
ENTER button.
AUDIO SETUP PAGE
AUDIO OUT
DIGITAL AUDIO
HDMI AUDIO OUT
CD UPSAMPLING
AUDIO DRC
Note
2
Press to go back to the previous menu item.
•AUDIO OUT
Press SETUP to exit the menu.
If you connected this player to your amplifier
using the 5.1 channel analog outputs (front,
surround, center and subwoofer outs), set
this to 5.1 Channel; if you connected only
the stereo outputs, set to 2 Channel.
• Default setting: 5.1 CHANNEL
• 2 CHANNEL – Select this to change
the channel output to stereo, which
only delivers sound from the two front
speakers and a subwoofer.
• VIRTUAL SURR – Select this to virtually
reproduce the surround channels.
• 5.1 CHANNEL – Select this setting
when using a multichannel audio/(video)
receiver with 6 channel inputs. In this
mode, the player performs DTS decoding
or Dolby Digital 5.1-channel decoding
when applicable, and Dolby Pro Logic
decoding on DVD-Video, Video-CD and
Audio CD discs with 2-channel sound
tracks. No Dolby Pro Logic decoding is
done with Super Audio CD discs.
Note
•
•
You can also select it using the SOUND MODE
buttons on the remote control.
Some DVD-Audio discs don’t allow downmixing of
audio.
Setting up the AUDIO SETUP page
Press the SETUP button.
1
2
Select AUDIO SETUP PAGE using the cursor
2 3
buttons (
/
), then press the ENTER
button.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu
6
About source audio output
When the source output mode has been switched among 2CH, Virtual Surround and 5.1 CH
mode setting using the Audio Out setting, audio output for each source will be as shown in the
following table.
Audio Contents
Audio Out Setting
2 CH
Mixed 2ch output
5.1CH output
2ch L/R
Digital output
2ch L/R
Dolby Digital
PCM (Digital out is PCM)
Virtual Surround
2ch L/R
2ch+Vsurround
(2CH)
Bitstream (Digital out is All)
5.1 CH
2 CH
2ch L/R
Dolby Pro Logic ll
Mixed 2ch (L0/R0)
Mixed 2ch+Vsurround
Mixed 2ch (L0/R0)
PCM Mixed 2CH
Dolby Digital
Virtual Surround
Mixed 2ch (Lt/Rt)
(Digital out is set to PCM)
(Multi CH)
Bitstream (Digital out is set to All)
5.1 CH
2 CH
Mixed 2ch (Lt/Rt)
Multi CH
2ch L/R
2ch L/R
PCM 2ch 44.1/48KHz
LPCM
Virtual Surround
2ch L/R
2ch+Vsurround
(88.2/96KHz if LPCM OUT is set
(2CH)
to 96KHz.)
5.1 CH
2 CH
2ch L/R
2ch L/R
2ch L/R
Dolby Pro Logic ll
2ch L/R
DTS, DVD-
Video/Audio
(2CH), CD
PCM (Digital out is PCM)
Bitstream (Digital out is All)
Virtual Surround
2ch+Vsurround
5.1 CH
2 CH
2ch L/R
2ch L/R
DVD
Mixed 2ch (L0/R0)
Mixed 2ch (Lt/Rt)
Mixed 2ch (L0/R0)
Mixed 2ch+Vsurround
PCM Mixed 2CH
DTS,
Virtual Surround
(Digital out is set to PCM)
DVD-Audio
(Multi)
Bitstream (Digital out is set to All)
5.1 CH
2 CH
Mixed 2ch (Lt/Rt)
Mixed 2ch (L0/R0)
Mixed 2ch (Lt/Rt)
Multi CH
Mixed 2ch (L0/R0)
Mixed 2ch+Vsurround
MPEG
PCM (Digital out is PCM)
Virtual Surround
(MULTI)
Bitstream (Digital out is All)
5.1 CH
2 CH
Mixed 2ch (Lt/Rt)
Multi CH
2ch L/R
2ch L/R
2ch L/R
DVD-Audio
PCM 2CH
Virtual Surround
2ch L/R
(see page 41)
(2CH)
5.1 CH
2 CH
2ch L/R
2ch L/R
2ch (Lf/Rf)
2ch (Lf/Rf)
DVD-Audio
(Multi)
PCM 2CH (Lf/Rf)
Virtual Surround
2ch (Lf/Rf)
2ch (Lf/Rf)+Vsurround
(see page 41)
5.1 CH
2 CH
2ch (Lf/Rf)
2ch L/R
Multi CH
2ch L/R
Virtual Surround
2ch L/R
2ch+Vsurround
CD
PCM 2ch 44.1KHz
5.1 CH
2 CH
2ch L/R
2ch L/R
---
Dolby Pro Logic ll
2ch L/R
OFF
2ch
Multi
Virtual Surround
---
OFF
Super
Audio
CD
5.1 CH
---
---
OFF
2 CH
---
---
OFF
OFF
Virtual Surround
5.1 CH
---
---
Mixed 2ch (Lt/Rt)
2ch L/R
2ch+Vsurround
Mixed 2ch
2ch L/R
2ch L/R
2ch L/R
Multi CH
2ch L/R
OFF
2 CH
PCM 2ch 44.1KHz
PCM 2ch 44.1KHz + Vsurround
PCM 2ch 44.1KHz
Video CD
Virtual Surround
5.1 CH
2ch+Vsurround
Dolby Pro Logic ll
2ch L/R
SVideo CD 2ch
MP3/DivX,WMA
2 CH
Virtual Surround
2ch+Vsurround
Dolby Pro Logic ll
PCM 2CH
5.1 CH
Note
•
•
No Dolby Pro Logic ll is allowed on DTS, DVD-Audio and Super Audio CD audio track.
LFE (Subwoofer) will always carry the LFE channel.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
6
DVD Setup Menu
DIGITAL OUT
HDMI AUDIO OUT
• Default setting: ALL
• Default setting: AUTO
Set the Digital output according to your
• AUTO – In this mode, when discs
optional audio equipment connection.
recorded in Dolby Digital, DTS, or MPEG
are played, the respective bit stream signal
is output. When DVD-Video/DVD-Audio
discs with multi-channel audio are played,
the multi-channel signal is output. When
discs recorded in 2-channel PCM or other
2-channel format are played, the audio
• OFF – Turn off the digital output.
• ALL – If you have connected your DIGITAL
AUDIO OUT to a multi-channel decoder/
receiver.
• PCM ONLY – Only if your receiver is not
capable of decoding multi-channel audio.
is output as 2-channel PCM. The output
formats are limited by the capabilities of
the connected component. For example,
if the disc is recorded in Dolby Digital
but the connected component does not
support Dolby Digital, the audio is output
as multi-channel PCM. If the connected
component does not support multi-
channel PCM either, the audio is output
as 2-channel PCM.
Note
•
If HDMI is activated, DIGITAL OUT is muted. HDMI
audio out is related to the “DIGITAL OUT” setting.
If set the “ALL” is set, HDMI Audio out is follows the
EDID. If set the “PCM” is set, HDMI Audio out is
always PCM.
•
If you set to “ALL” with a non-DTS compatible
amplifier, noise will be output when you play a DTS
disc.
• Multi PCM – In this mode, when discs
recorded in Dolby Digital, DTS, MPEG,
or DVD-Video/DVD-Audio are played,
a multi-channel signal is output. When
discs recorded in 2-channel PCM or other
2-channel format are played, the audio
is output as 2-channel PCM. The output
formats are limited by the capabilities of
the connected component. For example,
if the disc is recorded in Dolby Digital
but the connected component does not
support Dolby Digital, the audio is output
as 2-channel PCM.
LPCM OUT
• Default setting: 48kHz
If you connect the DVD Player to a PCM
compatible receiver via digital terminals,
coaxial or optical, you may need to adjust
“LPCM Output”. Discs are recorded at
a certain sampling rate. The higher the
sampling rate, the better the sound quality.
• 48kHz – Playback a disc recorded at the
sampling rate of 48 kHz. A 96 kHz (if
available on disc) PCM data stream will be
converted to 48 kHz.
• 2ch PCM – In this mode, audio is output
as 2-channel PCM for all discs. Select this
mode when the unit is connected to a TV
or projector.
• 96kHz – Playback a disc recorded at the
sampling rate of 96 kHz. If the 96 kHz
disc is copy-protected, the digital output
will automatically be converted to a
sampling rate of 48 kHz.
• Off – Audio signals are not output from
the HDMI jack.
Note
Note
•
High sampling rate DVD-Audio discs (192 kHz or
176.4 kHz) always output audio that has been
down sampled to 96 kHz or 88.2 kHz through the
digital outputs, when LPCM OUT is set to 96 kHz.
•
When audio signals are being output by HDMI-
compatible components, digital output signals are
muted.
•
If HDMI is activated, DIGITAL OUT is muted. HDMI
audio out is related to the “DIGITAL OUT” setting.
If set to “ALL”, HDMI Audio out is follows the EDID.
If set to “PCM”, HDMI Audio out is always PCM.
•
Audio is not output when the player is connected
to a device with an HDCP-compatible DVI jack.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu
6
HDMI Audio Output
HDMI Setting (Audio)
Auto formats
1
2
Auto*
Multi PCM*
2 ch PCM
Off
Dolby Digital
Dolby Digital
Multi channel PCM
Multi channel PCM
Multi channel PCM
Multi channel PCM
Left/Right
2 Channel DOWNMIX
2 Channel DOWNMIX
2 Channel DOWNMIX
2 Channel DOWNMIX*
Not Output
Not Output
Not Output
Not Output
Not Output
Not Output
Not Output
DVD
Linear PCM
Multi channel PCM
DTS
DTS
3
DVD-Audio
Multi channel PCM
4
CD/MP3/Super Audio CD*
DTS CD
DTS
Multi channel PCM
Left/Right
2 Channel DOWNMIX
Video CD
1
* : The order of priority in Auto mode is: Bit Stream, Multi PCM, 2ch PCM.
The output format is limited by the capabilities of the connected component.
2
* : The order of priority in Multi PCM mode is: Multi PCM, 2ch PCM.
The output format is limited by the capabilities of the connected component.
3
* : Audio is not output from discs that prohibit downmixing.
4
* : Audio is not output from Super Audio CDs. Audio is only output when a CD layer is played.
SPEAKER LEVEL
SPEAKER SET UP
Volume level setting for individual speakers
You can adjust the delay times (for center
(–6 dB to +6 dB).
and surround speakers only) and the
volume level for individual speakers. These
adjustments let you optimize the sound of
your system to best suit your surroundings
and setup.
SPEAKERS LEVEL SETUP
FRONT LEFT
FRONT RIGHT
CENTER
LFE
REAR LEFT
REAR RIGHT
0dB
0dB
0dB
0dB
0dB
0dB
IMPORTANT
Speaker settings are only available for multi-channel
audio output.
•
SPEAKER DISTANCE
FRONT SPEAKER, CENTER SPEAKER,
Delay time settings in relation to the listening
position/distance for individual speakers (1.0
MS to 9.0 MS).
REAR SP
• OFF (only for CENTER and REAR
speakers) – Select when no speakers are
connected.
• LARGE – Select if the main speaker cone
SPEAKERS DISTANCE SETUP
is 12 cm or more.
FRONT LEFT
FRONT RIGHT
CENTER
LFE
REAR LEFT
REAR RIGHT
3.0M
3.0M
3.0M
3.0M
3.0M
3.0M
• SMALL – Select if the main speaker cone
is less than 12 cm.
LFE (SUBWOOFER)
• ON – Select when a subwoofer is
connected.
• OFF – Select when no subwoofer is
connected.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
6
DVD Setup Menu
AUDIO DRC
Note
• Default setting: OFF
•
•
Use a longer delay time setting when the surround
speakers are closer to the listener than the front
speakers.
This mode optimizes playback of sound at
low volume. High volume outputs will be
softened and low volume outputs will be
A test tone will be automatically generated to help
you judge the sound level of each
speaker.
enhanced to an audible level. This feature
is only applicable for DVD video discs with
Dolby Digital mode.
CD UPSAMPLING
• Default setting: OFF
• ON – Turns on AUDIO DRC mode.
This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
• OFF – Turns off AUDIO DRC mode.
Select this to enjoy the sound with its full
dynamic range.
better sound quality. If you have activated
the upsampling function, the player will
automatically switch to stereo mode.
Note
•
Audio DRC is only effective with Dolby Digital
Audio sources.
• OFF – Select this to disable CD
upsampling.
• 88.2kHz (X2) – Select this to convert
the sampling rate of CDs to twice that of
the original.
• 176.4kHz (X4) – Select this to convert
the sampling rate of CDs to four times
that of the original.
Note
•
•
•
This setting is only valid for signals output from the
analog jacks.
CD upsampling is switched to OFF, if AUDIO OUT
is set to Vsurround and 5.1CH.
AUDIO OUT is switched to 2CH, if CD upsampling
is set to 88.2 kHz or 176.4 kHz.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu
6
Setting up the VIDEO SETUP page
Press the SETUP button.
1
2
Select VIDEO SETUP PAGE using the cursor
2 3
buttons (
/
), then press the ENTER
button.
5 ∞
3
Use the cursor buttons ( / ) to select the
3
desired item, then press the cursor ( ) or
ENTER button.
VIDEO SETUP PAGE
TV SYSTEM
TV ASPECT
PROGRESSIVE
PICTURE SETTING
HDMI SETUP
COMPONENT
BLACK LEVEL
CLOSED CAPTION
Note
2
to go back to the previous menu item.
•TVPSreYssSTEM
Press SETUP to exit the menu.
• Default setting: NTSC (USA model)
PAL (Europe model)
The colour system of the DVD system,
DVD and TV should match: only then will it
be possible to play a DVD on this system.
Before changing the TV system, determine
the colour system of your TV.
• PAL – Select this if the connected TV has
the PAL colour system. It will change the
video signal of an NTSC disc and output
it to PAL format.
• NTSC – Select this if the connected
TV has the NTSC colour system. It will
change the video signal of a PAL disc and
output it to NTSC format.
• MULTI – Select this if the connected TV
is compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
Select one of the options and press ENTER
to confirm.
• Follow the instructions shown on the TV
to confirm the selection (if any).
• If a blank/distorted TV screen appears,
wait for 15 seconds for the auto recovery.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
6
DVD Setup Menu
• 16:9 WIDE – Select this if you have a
CHANGING PAL TO NTSC
1.ENSURE THAT YOUR TV SYSTEM SUPPORTS
NTSC STANDARD.
2.IF THERE IS A DISTORTED PICTURE
DISPLAYED ON THE TV.WAIT IS SECONDS
FOR AUTO RECOVER
wide-screen TV.
OK
CANCEL
Select one of the options and press ENTER
to confirm.
Video output format when progressive is
"ON".
Note
•PRSOomGeRdEisScsSwIVillEnot allow you to change the aspect
Disc
TV
Output Format
ratio.
Format
system
YCbCr
Video/S-Video
NTSC
NTSC
NTSC
PAL
NTSC
PAL
PAL
PAL Progressive
NTSC NTSC Progressive
• Default setting: OFF
MULTI NTSC Progressive
PAL
PAL Progressive
Progressive scanning displays twice the
number of frames per second as interlaced
NTSC NTSC Progressive
PAL
MULTI PAL Progressive
PAL
scanning (ordinary normal TV system).
With nearly double the number of lines,
progressive scanning offers higher picture
resolution and quality.
If progressive is "OFF", Video Output Format
follow the TV SYSTEM with Interlace.
To change the TV system manually:
Before you start...
0
Press OPEN CLOSE to open the disc tray
~
Ensure that you have connected this DVD
system to a progressive scan TV using the
YCbCr connection (see page 11 “Home
theater video connections”).
without HDMI connected.
3
Press (RIGHT) on the remote control.
Ÿ
!
Press AUDIO on the remote control to change
the TV system setting.
PAL NTSC
Æ
NTSC PAL
• ON – Turns on progressive scan mode.
Æ
MULTI depends on the disc
Æ
The instruction menu appears on the TV.
ACTIVATING PROGRESSIVE SCAN:
TV ASPECT
1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.
2. CONNECT USING YPBPR (GBR) VIDEO CABLE.
3. IF THERE IS A DISTORTED PICTURE, WAIT
15 SECONDS FOR AUTO RECOVERY.
• Default setting: 16:9 WIDE
Set the aspect ratio of the DVD system
according to the TV type you have
OK
CANCEL
connected. The format you select must be
available on the disc.
2
Press to highlight “OK” in the menu and press
~
Ÿ
If it is not, the setting
for TV display will
ENTER to confirm.
The picture on your TV will remain distorted in
this state until you turn on the progressive scan
mode on your TV.
not affect the picture
during playback.
Turn on your TV's progressive scan mode
(refer to the user manual for your TV.)
The following menu appears on the TV.
• 4:3 PAN SCAN – Select this if you have
a conventional TV and want both sides
of the picture to be
trimmed or formatted to
fit your TV.
CONFIRM AGAIN TO USE PROGRESSIVE
SCAN. IF PICTURE IS GOOD,
PRESS OK BUTTON ON REMOTE.
• 4:3 LETTER BOX –
Select this if you have
OK
CANCEL
a conventional TV. In this case, a wide
picture with black bands on the upper and
lower portions of the TV will be displayed.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu
6
2
Press to highlight OK in the menu and press
!
ADV PICTURE
ENTER to confirm.
This player allows you to fine-tune the
The set-up is complete now and you can start to
following video parameters.
enjoy the high quality picture.
We recommend setting the aspect ratio on
your TV if the function is available.
• OFF – Disables the progressive scan
mode.
To deactivate Progressive manually:
DCDi
0
Press OPEN CLOSE to open the disc tray
~
• Default setting: ON
without HDMI connected.
DCDi (Directional Correction Deinterlacing)
computes and tracks the angle of the screen
edge to fill in missing pixels on the TV
2
Press (LEFT) on the remote control. Press
Ÿ
AUDIO on the remote control.
The DVD background screen appears on the TV.
screen. DCDi will optimize the image quality
significantly, especially during slow motion
playback. This function is available only for
progressive scan output.
Tip
•
There are some progressive scan TVs and high-
definition TVs that are not fully compatible with
this unit, resulting in an unnatural picture when
• OFF – Select to deactivate this function.
playing back a DVD Video disc in the progressive
scan mode. In this case, turn off the progressive
scan feature on both the DVD system and your TV.
• ON – Select to activate this function.
GAMMA
PICTURE SETTING
Enables you to non-linearly adjust the intensity
of the picture. A positive value enables you to
bring out low level detail in dark scenes, while
a negative value emphasizes contrast. This
function is not available when using an HDMI
compatible component.
• Default setting: STANDARD
This DVD system provides three predefined
sets of picture colour settings and one
personal setting which you can define
yourself.
-7 to +7
• STANDARD – Original colour setting.
• BRIGHT – Vibrant colour setting.
• SOFT – Warm colour setting.
CHROMA DELAY
The chroma (color) and luminance (brightness)
signals are not synchronized. The Chroma
Delay setting allows you to adjust the advance
delay of the chroma signal to yield a perfectly
clear picture. This function is not available
when using an HDMI-compatible component.
• PERSONAL – Selects this to personalize
2 3
the picture colour setting. Use the
/
keys to select to the setting that best
suits your personal preference and press
ENTER to confirm. For an average setting,
select 0.
-3 to +3
• BRIGHTNESS – Increase the value to
PSCAN FORMAT
brighten the picture or vice versa.
• Default setting: OFF
• SHARPNESS – Increase the value to
Set the aspect ratio of the projected images on
the screen. This function is only available for
progressive scan and HDMI video output.
sharpen the picture or vice versa.
• CONTRAST – Increase the value to
sharpen the picture or vice versa.
• SUPER WIDE – Select this to display a
4:3 picture disc on a wide-screen TV with
non-linear stretching (the centre position
of the screen is stretched less than the
side).
• TINT – Increase the value to darken
the picture or vice versa.
• COLOR – Increase the value to
enhance the color in your picture or
vice versa.
• 16:9 SQUEEZE – Select this to display
a 4:3 picture disc on a widescreen TV
without stretching. Black bars will be
shown on the both sides of the TV screen.
• OFF – No aspect ratio adjustment is
made when this option is selected.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
6
DVD Setup Menu
HDMI VIDEO
• Default setting: AUTO
Selects a suitable video resolution depending on the capability of the connected TV/device to
enhance the HDMI video output.
• 480P – Progressive output in 480 lines for NTSC TV
• 576P – Progressive output in 576 lines for PAL TV
• 720P – Progressive output upscaled to 720 lines
• 1080i – Interlaced output upscaled to 1080 lines
• 1080P – Progressive output upscaled to 1080 lines
• AUTO – The video output will automatically follow the display’s supported resolution
Note
•
If no display appears on the TV due to an unsupported resolution, use the composite video cable to connect the
DVD system and your TV. Turn on your TV to the correct input channel for the composite video and adjust the
resolution setting to 480P/576P.
•
•
•
•
•
The resolution can also be set with the HDMI button on the front panel.
In general, the larger the number, the higher the resolution.
When the resolution is changed, the image may be corrupted or the output may take longer than normal.
(see pages 13, 14)
Pressing the HDMI button for three seconds or more toggle the HDMI on/off state
720P/1080i/1080P only supports 60 Hz Video signal.
.
Setup Examples
Playback Disc
Resolution
Disc Recorded in Squeeze Ratio
Disc Recorded in 4:3 Ratio
(HDMI Setting)
TV ASPECT
16 :9 WIDE
Monitor Setting
TV ASPECT
PSCAN FORMAT
Monitor Setting
480P
Full/Squeeze
---
Standard
Normal
4:3
576P
16 :9 WIDE
SUPERWIDE
720P
16 :9 SQUEEZE
Normal/Through
1080i
Through
*1
1080P
OFF
The resolution is automatically selected to match the monitor you are using. Set TV SYSTEM, PSCAN
AUTO
FORMAT and your monitor setting to match the selected resolution.
Some monitors may use setting names that are different than those shown here.
*1
If the aspect ratio you desire is not available, select the most suitable setting from SUPERWIDE, 16:9 SQUEEZE and
OFF in “PSCAN FORMAT”.
Video Out format when HDMI is activated
YCbCr Output
HDMI Video
Video/S-Video output
Output
Progressive ON
Progressive OFF
480P
576P
720P
480P (NTSC progressive)
576P (PAL progressive)
Follow the Disc Source with Interlace.
(ex: NTSC disc play: NTSC interlace)
1080 i
No Video
1080P
46
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu
6
DYNAMIC PICTURE
BLACK LEVEL
Produces more dynamic picture by increasing
the picture contrast and the color intensity.
This function is available only for progressive
scan output.
• Default setting: 7.5 IRE (USA model)
0 IRE (European model)
If you set the TV type to NTSC, set the Black
level shift to 7.5 IRE. This will improve the
color contrast during playback. The black
0 to 5
level setting has no effect if the TV type is
set to PAL.
DVI OUTPUT RANGE
• Default setting: STANDARD
• 7. 5 IRE – Select this to enhance the black
level.
When connecting the DVI unit, black may
rise to the surface depending on the display.
• 0 IRE – Select this for the standard black
level setting.
• ENHANCED – Image data values between
0 (black) and 255 (white)
CLOSED CAPTION (USA Model only)
• STANDARD – Image data values between
• Default setting: OFF
16 (black) and 235 (white)
Closed captions are data hidden in the video
signals of specific discs, and are invisible
without the use of a special decoder. The
difference between subtitles and captions
is that subtitles are intended for hearing
persons and captions are for the hearing
impaired. Subtitles rarely show all of
COMPONENT
(Euro model only)
• Default setting: RGB
This setting allows you to toggle the output
of the video signal between RGB (on the A/V
EURO CONNECTOR) and YCbCr (on the
component).
the audio. For example, captions show
sound effects (e.g., “phone ringing” and
“footsteps”), while subtitles do not. Before
you select this function, please ensure that
the disc contains closed caption information
and your TV set also supports this function.
• YCbCr – Select this for YCbCr Pr
connection on component Video out.
• RGB – Select this for the A/V EURO
CONNECTOR.
• ON – Select this to enable the closed
To change the COMPONENT out manually:
caption function.
0
Press OPEN CLOSE to open the disc tray
~
• OFF – Select this to disable the closed
without HDMI connection.
caption function.
3
Press (RIGHT) on the remote control.
Ÿ
!
Press ANGLE on the remote control to change
the COMPONENT out.
Note
•
When the player is set to YCbCr, some TV may not
properly synchronize with the player on the A/V
EURO connector.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
6
DVD Setup Menu
Setting up the PREFERENCE page
7
1
2
Press (STOP) twice to stop playback (if
any), then press SETUP.
Select PREFERENCE PAGE using the cursor
2 3
buttons (
/
), then press the ENTER
button.
5 ∞
3
Use the cursor buttons ( / ) to select the
3
desired item, then press the cursor ( ) or
ENTER button.
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
VR LIST
PASSWORD
DIVX SUBTITLE
DEFAULT
Note
2
•
to go back to the previous menu item.
UsPinregssthe AUDIO, SUBTITLE and DISC
Press SETUP to exit the menu.
MENU language
You can select your preferred language
settings for DVD playback. If the selected
language is recorded on the DVD disc, the
DVD system will automatically play the
disc in that language. Otherwise, the disc’s
default language will be used instead.
AUDIO
Selects the preferred audio language for
DVD playback.
• Default setting: ENGLISH
If the language you want is not in the list,
select OTHERS, then use the numeric
keypad (0-9) on the remote to enter the
4-digit language code “XXXX” (see page 52
“Language Codes”) and press ENTER.
SUBTITLE
Selects the preferred subtitle language for
DVD playback.
• Default setting: OFF
48
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu
6
DISC MENU
PBC
Selects the preferred disc menu language for
DVD playback.
• Default setting: ON
The Play Back Control feature is applicable
• Default setting: ENGLISH
for VCD/SVCD only. It allows you to play
Video CDs (2.0) interactively, following the
menu on the display.
5 ∞
Use the
•
/
keys to select a language and
press ENTER to confirm.
• ON – The index menu (if available) will
Note
appear on the TV when you load a VCD/
SVCD.
For some discs, selection can be made using the
PADRVEDNmTeAnuL. In this case, press MENU to display the
• OFF – The VCD/SVCD will skip the index
DVD menu screen and then make your selection.
menu and playback directly from the
beginning.
• Default setting: 8 ADULT
MP3/JPEG NAV
Some DVDs may have a parental level
assigned to the complete disc or to certain
scenes on the disc. This feature lets you set a
playback limitation level.
• Default setting: WITHOUT MENU
MP3/JPEG Navigator can only be set if the
disc is recorded with a menu. It allows you
to select different display menus for easy
navigation.
The rating levels are from 1 to 8 and are
country dependent. You can prohibit the
playing of certain discs that are not suitable
for your children or play certain discs with
alternative scenes for certain discs.
• WITHOUT MENU – Displays all the files
contained in the MP3/Picture disc.
• WITH MENU – Displays the folder menu
of the MP3/Picture disc.
Note
PREFERENCE PAGE
AUDIO
1 KID SAFE
2 G
•
This DVD system can only display 650 files/folder
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
VR LIST
in the directory.
3 PG
4 PG 13
5 PGR
6 R
VR LIST
PASSWORD
DIVX SUBTITLE
DEFAULT
7 NC 17
8 ADULT
• Default setting: ORIGINAL LIST
There are two ways to play back a disc in VR
5 ∞
1
2
Press
/
to highlight a rating level for the
(Video Recording) format: ORIGINAL LIST
disc inserted and press ENTER.
and PLAY LIST. This feature is not available
with non-VR format discs.
• To disable parental controls and have all
discs play, select 8 ADULT.
• ORIGINAL LIST – Select this to play the
originally recorded titles on the disc.
Use the numeric keypad (0-9) to enter the
• PLAY LIST – Select this to play the
edited version of the disc. This feature is
only available when a play list has been
created.
six-digit password (see page 50).
• DVDs that are rated above the level you
selected will not play unless you enter the
six-digit password.
Note
•
•
VCD, SVCD, and CD have no level indication, so the
parental control function has no effect with these
types of discs. This also applies to most illegal DVD
discs.
Some DVDs are not encoded with a rating even
though the movie rating may be printed on the disc
cover. The rating level feature does not work for
such discs.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
6
DVD Setup Menu
Previewing VR format
PASSWORD
The password is used for both Parental
1
2
During playback, press SCAN.
Control and Disc Lock. Enter your six-digit
password to play a locked disc or when
prompted for a password. The default
password is “111111 ”. To change the password:
5 ∞
Press
/
to highlight either TITLE
DIGEST or TITLE INTERVAL.
SELECT DIGEST TYPE
TITLE DIGEST
1
2
Press ENTER to access the change password
menu.
TITLE INTERVAL
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
3
Press ENTER to select the function.
• TITLE DIGEST – This function will display
thumbnail pictures of titles on the screen.
OK
Up to six thumbnail pictures per page will
be displayed.
• In ORIGINAL LIST mode, the originally
recorded titles on the disc will be
displayed.
Use the numeric keypad 0-9 on the remote
control to enter your existing six-digit
password at OLD PASSWORD.
• In PLAY LIST mode, every title in the
play list will be displayed.
Note
• TITLE INTERVAL – This function will
divide and display the contents of each
title being played back in regular intervals,
making it easy to preview the recording.
•
When doing this for the first time or if you forget
your existing password, key in “111111 ”.
3
4
5
Enter the new six-digit password at NEW
PASSWORD.
Up to six thumbnail pictures per page will
be displayed.
Enter the new six-digit password again at
• If the title being played back is short,
CONFIRM PWD.
the TITLE DIGEST function will be
performed instead.
Press ENTER to confirm and exit the menu.
DIVX SUBTITLE
You can set the font type that supports the
recorded DivX subtitle.
• Default setting: STANDARD
STANDARD
(example for 6 thumbnail pictures display)
Albanian, Danish, Dutch, English, Finnish, French,
Gaelic, German, Italian, Kurdish (Latin), Norwegian,
Portuguese, Spanish and Swedish.
2 3 5 ∞
4
5
Use
/
/
/
to select a title, or use the
numeric buttons to enter the title number
CYRILLIC
next to SELECT.
Bulgarian, Belorussian, Macedonian, Moldavian,
Russian, Serbian and Ukrainian.
4 ¢
• Press
/
to access the previous/
next page.
Note
Press ENTER to confirm the selection.
•
Supported subtitle extensions for DivX are “.srt”,
“.smi”, “.sub”, “.ssa”, “.ass”.
To quit the preview function
2 3 5 ∞
•
Use
/
/
/
to highlight EXIT and press
ENTER to confirm.
To return to the preview menu
2 3 5 ∞
•
Use
/
/
/
to highlight MENU and press
ENTER to confirm.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu
6
DEFAULT
This feature enables you to reset all the
setup menu options and your personal
settings to the factory defaults, except your
password for Parental Control and Disc Lock.
Press ENTER to confirm the default reset.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Additional Information
Language Codes
This page is used to select other languages. This does not affect the options in AUDIO, SUBTITLE or
DISC MENU.
Abkhazian
6566
6565
6570
8381
6577
6582
7289
6583
6569
6589
6590
6665
6985
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
7889
7889
9072
9065
6785
6785
6786
7587
6779
7282
6783
6865
7876
6890
6978
6979
6984
7079
7074
7073
7082
7089
7168
7176
7565
6869
7573
6976
7178
7185
7265
7269
7290
7273
7279
7285
7383
Oromo
7977
7983
7983
8073
8065
7065
8076
8084
7967
8083
8185
8277
8279
8278
8285
8377
8371
8365
8367
7168
8382
8378
8368
8373
8375
8376
8379
8384
7882
6983
8385
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9065
9085
Ido
7379
7368
7365
7369
7385
7375
7165
7384
7465
7486
7576
7578
7583
7575
7577
7573
8287
7589
7586
7579
7574
7585
7574
7679
7665
7686
7666
7673
7673
7673
7678
7684
7666
7775
7771
7783
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7886
7868
7882
7871
7869
8369
7868
7879
7866
7878
7889
7878
7967
6785
6785
6785
7982
Afar
Ossetian; Ossetic
Ossetic; Ossetian
Pali
Indonesian
Afrikaans
Interlingua (International)
Albanian
Interlingue
Amharic
Panjabi
Inuktitut
Arabic
Persian
Inupiaq
Armenian
Assamese
Avestan
Polish
Irish
Portuguese
Provençal; Occitan (post)
Pushto
Italian
Japanese
Aymara
Javanese
Azerbaijani
Bashkir
Quechua
Raeto-Romance
Romanian
Rundi
Kalaallisut
Kannada
Basque
Kashmiri
Belarusian
Kazakh
Bengali
Russian
Khmer
Bihari
Samoan
Kikuyu; Gikuyu
Kinyarwanda
Kirghiz
Bislma
Sango
Bokmål, Norwegian
Bosnian
Sanskrit
Sardinian
Scottish Gaelic; Gaelic
Serbian
Komi
Breton
Korean
Bulgarian
Kuanyama; Kwanyama
Burmese
Shona
Kurdish
Castilian, Spanish
Sindhi
Kwanyama; Kuanyama
Catalan
Sinhalese
Lao
Chamorro
Chechen
Slovak
Latin
Slovenian
Somali
Latvian
Chewa; Chichewa; Nyanja
Chichewa; Chewa; Nyanja
Chinese
Letzeburgesch;
Limburgan; Limburger;
Limburger; Kimburgan;
Limburgish; Limburger;
Lingala
Sotho, Southern
South Ndebele
Spanish; Castilian
Sundanese
Swahili
Chuang; Zhuang
Church Slavic; Slavonic;
Church Slavonic; Church
Chuvash
Lithuanian
Swati
Luxembourgish;
Macedonian
Malagasy
Cornish
Swedish
Corsican
Tagalog
Croatian
Tahitian
Malay
Czech
Tajik
Malayalam
Danish
Tamil
Maltese
Dutch
Tatar
Manx
Dzongkha
Telugu
Maori
English
Thai
Marathi
Esperanto
Tibetan
Marshallese
Estonian
Tigrinya
Moldavian
Faroese
Tonga (Tonga Islands)
Mongolian
Fijian
Tsonga
Nauru
Finnish
Tswana
Navaho; Navajo
Navajo; Navaho
Ndebele; North
Ndebele; South
Ndonga
French
Turkish
Frisian
Turkirnen
Twi
Gaelic; Scotish Gaelic
Gallegan
Uighur
Georgian
Ukrainian
Urdu
Nepali
German
Northern Sami
North Ndebele
Norwegian
Gikuyu; kikuyu
Greek,
Uzbek
Vietnamese
Guarani
Volapük
Norwegian Bokmål; Bokmål
Norwegian Nynork
Nyanja; Chichewa; Chewa
Nynorsk; Norwegian;
Occitan (post 1500); Proven
Old Bulgarian; Old Slavonic;
Old Church Slavonic; Old
Old Slavonic; Church
Oriya
Gujarati
Walloon
Hausa
Welsh
Hebrew
Wolof
Herero
Xhosa
Hindi
Yiddish
Hiri Motu
Hungarian
Icelandic
Yoruba
Zhuang; Chuang
Zulu
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
7
Handling discs
Discs to avoid
When holding discs of any type, take care not to leave
Discs spin at high speed inside the player. If you can see
fingerprints, dirt or scratches on the disc surface. Hold
the disc by its edge or by the center hole and edge.
that a disc is cracked, chipped, warped, or otherwise
damaged, don't risk using it in your player. You could
end up damaging the unit.
Damaged or dirty discs can affect playback performance.
Take care also not to scratch the label side of the disc.
Although not as fragile as the recorded side, scratches
can still result in a disc becoming unusable.
This unit is designed for use with conventional, fully
circular discs only. Use of shaped discs is not recom-
mended for this product.
Should a disc become marked with fingerprints, dust,
etc., clean using a soft, dry cloth, wiping the disc lightly
from the center to the outside edge as shown in the
diagram below.
Cleaning the pickup lens
The DVD player’s lens should not become dirty in normal
use, but if for some reason it should malfunction due to
dust or dirt, consult your nearest MARANTZ-authorized
service center. Although lens cleaners for CD players
Don’t wipe the disc surface
using circular strokes.
Wipe lightly from the
center of the disc using
straight strokes.
aPrreocobmlemmercsiawllyiatvhailcabolen,dweendosanottiorencommend using
them since some may damage the lens.
If necessary, use a cloth moistened in alcohol, or a
commercially available CD/DVD cleaning kit to clean a
disc more thoroughly. Never use benzene, thinner or
other cleaning agents, including products designed for
cleaning vinyl records.
Condensation may form inside the player if it is brought
into a warm room from outside, or if the temperature of
the room rises quickly. Although the condensation won’
t damage the player, it may temporarily impair its per-
formance. For this reason you should leave it to adjust
to the warmer temperature for about an hour before
switching on and using it.
Storing discs
Although CDs and DVD discs are more durable than
vinyl records, you should still take care to handle and
store discs correctly. When you're not using a disc,
return it to its case and store upright. Avoid leaving discs
in excessively cold, humid, or hot environments (including
under direct sunlight).
Don't glue paper or put stickers onto the disc, or use
a pencil, ball-point pen or other sharp-tipped writing
instrument. These could all damage the disc.
For more detailed care information, see the instructions
that come with discs.
Do not load more than one disc into the player.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Additional Information
ing a suitable location for it:
Hints on installation
Moving the player
If you need to move the player, first press the POWER
We Dwaont..y.ou to enjoy using this unit for years to come,
so please bear in mind the following points when choos-
ON/STANDBY button on the front panel to put the
player in standby, then unplug the power cord. Never lift
or move the unit during playback: discs rotate at high
speed and may be damaged.
Use in a well-ventilated room.
✓
Place on a solid, flat, level surface, such as a table,
✓
Precautions on using the power cord
shelf or stereo rack.
Handle the power cord by the plug part. Do not pull
out the plug by tugging the cord, and never touch the
power cord when your hands are wet, as this could
cause a short circuit or electric shock. Do not place the
unit, a piece of furniture, or other object on the power
cord or pinch the cord in any other way. Never make a
knot in the cord or tie it with other cords. The power
Don’t...
Use in a place exposed to high temperatures or
✗
humidity, including near radiators and other heat-
generating appliances.
Place on a window sill or other place where the
✗
player will be exposed to direct sunlight.
cords should be routed so that they are not likely to
be stepped on. A damaged power cord can cause a fire
or give you an electric shock. Check the power cord
once in a while. If you find it damaged, ask your nearest
MARANTZ authorized service center or your dealer for
a replacement.
Use in an excessively dusty or damp environment.
✗
Place directly on top of an amplifier, or other
✗
component in your stereo system that becomes
hot during use.
Use near a television or monitor as you may ex-
✗
perience interference, especially if the television
uses an indoor antenna.
Use in a kitchen or other room where the player
may be exposed to smoke or steam.
✗
✗
✗
Use on a thick rug or carpet, or cover with cloth:
this may prevent proper cooling of the unit.
Place on an unstable surface, or one that is not
large enough to support all four of the unit’s feet.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
7
Troubleshooting
Settings are canceled.
Incorrect operation is often mistaken for
trouble or malfunction. If you think that
there is something wrong with this unit,
check the points below. Sometimes the
trouble may lie in another component.
Inspect the other components and
electrical appliances being used. If
the trouble cannot be rectified after
checking the items below, ask your
nearest MARANTZ authorized service
center or your dealer to carry out repair
work.
•
When the power is cut due to a power failure or by
unplugging the power cord, settings will be canceled.
Before unplugging the power cord, press the POWER
button on the remote control and check that the
STANDBY indicator on the front panel is lit.
No picture/No color.
•
•
•
Incorrect video connections.
Check that connections are correct and that plugs are
inserted fully.
TV/monitor or AV amplifier settings are incorrect.
Check the instruction manual of the connected
equipment.
The PROGRESSIVE menu is set to ON but your TV/
monitor is not compatible with progressive scan.
The disc is ejected automatically after loading.
Reconnect the player to your TV using a composite
•
•
•
Dirty or damaged disc.
or S-Video cord and set the TV to the appropriate
input. Now choose the Interlace setting in the
PROGRESSIVE menu, then switch the TV input back
to the component input. (page 44)
See page 53 for disc care information.
Disc not seated properly in the disc guide.
Align the disc properly.
Incompatible region number.
Screen is stretched or aspect does not change.
If the region number on a DVD-Video disc does not
match the number on the player, the disc cannot be
used (page 9).
•
The TV ASPECT setting in the Setup menu is incorrect.
Set the TV ASPECT option to match the TV/monitor
you're using (page 44).
•
Condensation inside the player.
Allow time for condensation to evaporate. Avoid using
the player near an air-conditioning unit.
Picture disturbance during playback or dark.
•
•
This player is compatible with Macro-Vision System copy
guard. Some discs include a copy prevention signal, and
Playback is not possible.
when this type of disc is played back, stripes etc., may
appear on some sections of the picture depending on the
TV. This is not a malfunction.
•
Disc is loaded upside down.
Reload the disc with the label side face-up.
Discs respond differently to particular player functions.
This may result in the screen becoming black for a brief
instant or shaking slightly when the function is executed.
Cannot play DVD-R/RW disc.
•
Only a DVD-R/RW disc that has been finalized only can be
played.
These problems are largely due to differences between
discs and disc content and are not malfunctions of this
player.
mark appears on the screen.
•
When using progressive-scan
•
The operation is prohibited by the player.
If your TV is connected using the COMPONENT
•
The selected function does not operate for that disc.
VIDEO OUT jacks, set the PROGRESSIVE menu to
OFF (page 44).
Picture playback stops and the operation buttons can
not be used.
When recorded on a VCR or passed through an AV
selector, there is disturbance in the playback picture.
7
3
•
•
Press (STOP), then start playback again (PLAY).
•
Due to the player’s copy protection circuits, connection
of this device through a VCR or an AV selector may
prevent recording or cause picture problems. This is not a
malfunction.
Switch to standby once using the front panel POWER
ON/STANDBY and then switch on again using the front
panel POWER ON/STANDBY.
New settings made in the Setup screen menus while a
disc is playing are ineffective.
•
Some settings can be changed while a disc is playing, but
do not take effect until the disc is stopped then restarted.
This is not a malfunction.
Make the same setting when the player is stopped.
7
3
Press (STOP), then restart playback (PLAY).
Note that making settings in the Setup screen menus
may cancel the RESUME function.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Additional Information
The remote control doesn't seem to work.
Noticeable difference in DVD and CD volume.
•
•
The remote control is too far from the player, or the angle
with the remote sensor is too wide.
•
DVDs and CDs use different recording methods. This is
not a malfunction.
Use the remote control within its operating range (page
Cannot output 192 kHz or 176.4 kHz digital audio.
7).
The player does not output digital audio at these sampling
The batteries are exhausted.
rates.
Put in new batteries (page 7).
Cannot output 96 kHz or 88.2 kHz digital audio.
Cannot listen to high-sampling rate audio through the
•
Check that the LPCM OUT setting is not set to 96 kHz
digital output.
(page 40).
•
•
LPCM Out is set to 48 kHz.
•
Some discs are digital copy-protected and do not output
Set it to 96 kHz.
high sampling rate digital audio.
As a copy-protection measure, some DVDs do not output
96 kHz audio.
No DTS audio output.
In this case, even if 96 kHz is selected, the player
automatically outputs the audio at 48 kHz. This is not
a malfunction.
•
•
If this unit is connected to a non-DTS compatible amplifier
or decoder using a digital audio cable, set DIGITAL OUT
to PCM in the Setup menu. If you do not do this, noise
will be output if you try and play a DTS disc.
No audio, or audio is distorted.
•
•
•
Some DVD discs do not output digital audio.
Switch your amplifier to the player's analog outputs.
Dirt, dust, etc. on the disc.
If this unit is connected to a DTS-compatible amplifier or
decoder using a digital audio cable, check the amplifier
settings, and that the cable is properly connected.
Clean the disc (page 53).
Interconnectors are not fully inserted into the terminals (or
are not connected).
Check that all interconnectors are firmly inserted.
Dirty or oxidized plugs/terminals.
•
•
•
Clean the plugs/terminals.
Incorrect audio cable connection.
Check the audio connections (pages 10 to 12).
Player's output is connected to the amplifier's phono
(turntable) inputs.
Connect to any set of inputs except phono.
•
The disc is paused.
3
Press (PLAY) to exit the pause mode.
•
Incorrect amplifier settings.
Check that the volume is turned up, that the speakers
are on, the input function set correctly, etc.
The analog audio is OK, but there appears to be no
digital audio signal.
•
Incorrect AUDIO SETUP menu settings.
Make sure that the DIGITAL OUT setting is set to ALL
or PCM (page 40).
Check the amp's instruction manual.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
7
A disc containing the MP3 tracks won’t play.
•
If the disc is a recordable CD, make sure that the disc had
been finalized.
Check that the track(s) are in the MPEG1 Audio Layer
3 format.
Some MP3 tracks appear to be missing from a disc.
•
If a track name does not end in “.mp3” or “.MP3”, this
player will not recognize it as an MP3 track.
•
This player only recognizes about 650 files per folder and
300 folders per disc. If there are more titles than this, you
will not be able to play them.
•
This player is not compatible with multi-session discs.
If the disc is multi-session, you will only be able to play
tracks recorded onto the first session.
The unit is connected to an HDMI/DVI component but
the HDMI/DVI indicator on the display does not light.
•
•
•
Set the input selector on the connected TV or HDMI/DVI
component to this unit.
This unit cannot be connected to TVs or HDMI/DVI
components that do not support HDCP.
Reset this unit and the TV or HDMI/DVI component by
turning them off and on.
No video appears on the connected HDMI/DVI
component.
•
Can the connected TV or HDMI/DVI component use the
selected resolution?
Set the HDMI VIDEO under HDMI Setup. (page 46)
•
Set the input selector on the connected TV or HDMI/DVI
component to this unit.
•
TVs or HDMI/DVI components that do not support HDCP
cannot output video from this unit.
No audio is coming from the connected HDMI
component.
•
•
•
The unit will not output an audio signal if Audio has been
turned off under HDMI AUDIO OUT Setup. (page 40)
Some HDMI-compatible monitors do not support audio
output.
The unit will not output an audio signal if a DVI
component has been connected.
Unable to play DivX movies.
•
Check that the DivX files are encoded with “Home
Theater's mode with DivX” certified encoder.
No sound during DivX movies playback.
•
The audio codes may not be supported by the DVD player.
A DivX movie does not repeat.
•
Check that file size of the movies does not exceed the file
size of the CD disc during burning.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Additional Information
21-pin connector assignment
Specifications
(Europe model only)
AV connector output ........................ 21-pin connector
This connector provides the video and audio signals
for connection to a compatible color TV or monitor.
General
System
DVD-Video, DVD-Audio, DVD R/RW, Super Audio
CD, Video CD, CD, MP3 files, JPEG files, DviX and
WMA
20 18 16 14 12 10 8 6 4 2
Power requirements (U.S.A.).................... 120 V, 60Hz
Power requirements (Europe)...........230 V, 50/60Hz
Power consumption................................................. 25 W
Power consumption in standby mode................0.8 W
Weight.............................................5.8 kg (12 lb 13 oz)
Dimensions .............440 (W) x 78 (H) x 427 (D) mm
(17.3 (W) x 3.1 (H) x 16.8 (D) in.)
21 19 17 15 13 11 9 7 5 3 1
PIN no.
1
3
4
7
Audio 2/R out
Audio 1/L out
GND
15 R out
16 Blank
17 GND
Operating temperature
............................ +5 °C to +35 °C (+41 °F to +96 °F)
Operating humidity
B out
19 Video out
21 GND
8
Status
11 G out
....................................5 % to 85 % (no condensation)
S-Video output
Audio output
Y (luminance) - Output level...............1 Vp-p (75
C (color) - Output level................286 mVp-p (75
)
Ω
Ω
Output level
)
During audio output...................2 Vrms (1kHz, 0 dB)
Jacks..............................................................S-VIDEO jack
Number of channels ..................................................2/6
Jacks .................................................................... RCA jack
Video output
Audio characteristics
Output level ............................................1 Vp-p (75
)
Ω
Ω
Ω
Frequency response
Jacks .................................................................... RCA jack
...............................4 Hz to 44 kHz (DVD fs: 96 kHz)
S/N ratio ...............................................................110 dB
Dynamic range ....................................................100 dB
Total harmonic distortion..............................0.003 %
Wow and flutter: Limit of measurement ( 0.001 % W.
PEAK) or lower
B
R
Component video output (Y, C , C )
Output level.....................................Y: 1.0 Vp-p (75
)
B
B
R
R
C /P , C /P : 0.7 Vp-p (75
)
Jacks .................................................................. RCA jacks
HDMI output
Digital output
Output terminal .................................................... 19-pin
Coaxial digital output......................................RCA jack
Optical digital output................... Optical digital jack
Other terminals
Control in/out...................................................RCA jack
Flasher input...................................... Mini jack (3.5 )
ø
RS232C ...........................................................................1
Accessories
Remote control ..............................................................1
AAA/R03 dry cell batteries.........................................2
Audio/Video cable (yellow/red/white) ....................1
System control cable....................................................1
Power cable.....................................................................1
User Guide (this manual)
Warranty card
Note: The specifications and design of this product are
subject to change without notice, due to improvement.
(mm)
440
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
7
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in XXXXX
2006/XX PMC
00M18CW851250
Download from Www.Somanuals.com. All Manuals Search And Download.
|