Marantz DVD Player VC5400 User Manual

Model VC5400 User Guide  
5 Disc DVD Changer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNERS MANUAL.  
AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.  
This product has been designed and manufactured to assure personal safety. Improper use can result in electric  
shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following proce-  
dures for installation, use, and servicing.  
This product does not contain any parts that can be repaired by the user.  
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER  
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.  
1. Read these instructions. - All these safety and oper-  
ating instructions should be read before the product is  
operated.  
10. Protect the power cord from being walked on or  
pinched particularly at plugs, convenience  
receptacles, and the point where they exit from  
the product.  
2. Keep these instructions. - The safety, operating and  
use instructions should be retained for future refer-  
ence.  
11. Only use attachments/accessories specified by  
the manufacturer.  
3. Heed all warnings. - All warnings on the product and  
in the operating instructions should be adhered to.  
4. Follow all instructions. - All operating and use  
instructions should be followed.  
5. Do not use this product near water. – For example:  
near a bath tub, wash bowl, kitchen sink, laundry tub,  
in a wet basement; or near a swimming pool; and  
other areas located near water.  
12. Use only with the cart, stand, tripod, bracket, or  
table specified by the manufacturer, or sold with  
apparatus. When a cart is used, use caution  
when moving the cart/product combination to  
avoid injury from tip-over.  
6. Clean only with dry cloth. – Unplug this product from  
the wall outlet before cleaning. Do not use liquid  
cleaners.  
7. Do not block any ventilation openings. Install in  
accordance with the manufacturers instructions. -  
Slots and openings in the cabinet are provided for  
ventilation and to ensure reliable operation of the  
product and to protect it from over-heating. The open-  
ings should never be blocked by placing the product  
on a bed, sofa, rug or other similar surface. This prod-  
uct should not be placed in a built-in installation such  
as a bookcase or rack unless proper ventilation is pro-  
vided or the manufacturer’s instructions have been  
adhered to.  
13. Unplug this product during lightning storms or  
when unused for long periods of time.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the product has been  
damaged in any way, such as power-supply cord  
or plug is damaged, liquid has been spilled or  
objects have fallen into the product, the product  
has been exposed to rain or moisture, does not  
operate normally, or has been dropped.  
8. Do not install near any heat sources such as radi-  
ators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized  
or grounding-type plug. A polarized plug has two  
blades with one wider than the other. A ground-  
ing type plug has two blades and a third ground-  
ing prong. The wide blade or the third prong are  
provided for your safety. If the provided plug does  
not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Operation with Audio CD and MP3/WMA Disc . 23- 24  
Playing an Audio CD and MP3/WMA Disc . . . . . 23  
Notes on MP3/WMA Recordings . . . . . . . . . . . . 23  
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Moving to another Track . . . . . . . . . . . . . . . 24  
Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Random with MP3/WMA Disc . . . . . . . . . . . 24  
Repeat Track/ All/ Off. . . . . . . . . . . . . . . . . . 24  
Random with Audio CD . . . . . . . . . . . . . . . . 24  
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 24  
3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 24  
Changing the Audio Channel . . . . . . . . . . . . 24  
Repeat Track/Disc/All/Off . . . . . . . . . . . . . . . 24  
Operation with JPEG Disc. . . . . . . . . . . . . . . . . . . 25  
Viewing a JPEG disc . . . . . . . . . . . . . . . . . . . . . 25  
Moving to another File . . . . . . . . . . . . . . . . . 25  
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . 25  
To flip the picture . . . . . . . . . . . . . . . . . . . . . 25  
To rotate picture. . . . . . . . . . . . . . . . . . . . . . 25  
Notes on JPEG Recordings . . . . . . . . . . . . . 25  
Programmed Playback . . . . . . . . . . . . . . . . . . . 26-27  
Programmed Playback with Audio CD . . . . . . . . 26  
Programmed Playback with MP3/WMA disc . . . . 26  
Programmed Playback with Video CD . . . . . . . . 26  
Repeat Programmed Tracks . . . . . . . . . . . . 27  
Erasing a Track from Program List. . . . . . . . 27  
Erasing the Complete Program List . . . . . . . 27  
Additional Information . . . . . . . . . . . . . . . . . . . . . 28  
Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 28  
HDCD Playback. . . . . . . . . . . . . . . . . . . . . . . . . 28  
Setting Remote control codes of DVD player . . . 28  
Introduction  
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2  
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3  
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6  
Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Front Panel and Display Window . . . . . . . . . . . . . . 7  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Preparation  
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12  
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . 10  
Connecting to Optional Equipment. . . . . . . . . 11-12  
Before Operation . . . . . . . . . . . . . . . . . . . . . . . 13-17  
General Explanation. . . . . . . . . . . . . . . . . . . . . . 13  
On-Screen Display . . . . . . . . . . . . . . . . . . . . 13-14  
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 15-17  
Initial Settings General Operation. . . . . . . . . 15  
Language . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Parental Control. . . . . . . . . . . . . . . . . . . . . . 17  
Operation  
Operation with DVD and Video CD . . . . . . . . . 18-22  
Playing a DVD and Video CD. . . . . . . . . . . . . . . 18  
Exchanging discs during playback . . . . . . . . 18  
Skipping discs . . . . . . . . . . . . . . . . . . . . . . . 18  
Exchanging the disc and starting playback. . 18  
General Features. . . . . . . . . . . . . . . . . . . . . . . . 19  
Moving to another TITLE/GROUP . . . . . . . . 19  
Moving to another CHAPTER/TRACK . . . . . 19  
Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Still Picture and Frame-by-Frame Playback . 19  
Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 19  
Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Time Search . . . . . . . . . . . . . . . . . . . . . . . . 20  
3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 20  
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Marker Search. . . . . . . . . . . . . . . . . . . . . . . 21  
Special DVD Features . . . . . . . . . . . . . . . . . . . . 21  
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 21  
Changing the Audio Language. . . . . . . . . . . 21  
Changing the Audio Channel . . . . . . . . . . . . 21  
Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . . . . 22  
Reference  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Speaker Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Language Code List . . . . . . . . . . . . . . . . . . . . . . . 31  
Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
About the symbols for instructions  
Indicates hazards likely to cause harm to the unit  
itself or other material damage.  
Indicates special operating features of this unit.  
Indicates tips and hints for making the task easier.  
Moving to another GROUP . . . . . . . . . . . . . . 22  
Viewing another PAGE. . . . . . . . . . . . . . . . . 22  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use  
Chapter (DVD video discs only)  
Playable Discs  
Sections of a picture or a musical piece that are smaller  
than titles. A title is composed of one or several chap-  
ters. Each chapter is assigned a chapter number,  
enabling you to locate the chapter you want. Depending  
on the disc, chapters may not be recorded.  
DVD video discs  
(8 cm / 12 cm disc)  
DVD audio discs  
(8 cm / 12 cm disc)  
Group (DVD audio discs only)  
Video CD (VCD)  
(8 cm / 12 cm disc)  
The main audio content or accompanying feature  
content or additional feature content, or music album.  
Each group is assigned a group reference number  
enabling you to locate it easily.  
Audio CD  
(8 cm / 12 cm disc)  
In addition, this unit can play a HDCD, DVD-R,  
DVD RW, Kodak PICTURE CD, SVCD, and CD-R or  
CD-RW that contains audio titles, MP3, WMA or JPEG  
files.  
Track (DVD audio discs, Video CD and audio CD  
only)  
Sections of a picture or a musical piece on a video CD  
or an audio CD. Each track is assigned a track number,  
enabling you to locate the track you want.  
Notes  
Scene  
– Depending on the conditions of the recording equip-  
ment or the CD-R/RW (or DVD-R/ RW) disc itself,  
some CD-R/RW (or DVD-R/ RW) discs cannot be  
played on the unit.  
– Do not attach any seal or label to either side (the  
labeled side or the recorded side) of a disc.  
On a video CD with PBC (Playback control) functions,  
moving pictures and still pictures are divided into sec-  
tions called “Scenes”. Each scene is displayed in the  
menu screen and assigned a scene number, enabling  
you to locate the scene you want.  
A scene is composed of one or several tracks.  
Do not use irregularly shaped CDs (e.g., heart-shaped  
or octagonal). It may result in malfunctions.  
Types of video CDs  
There are two types of video CDs:  
Notes on DVDs and Video CDs  
Video CDs equipped with PBC (Version 2.0)  
PBC (Playback control) functions allow you to interact  
with the system via menus, search functions, or other  
typical computer-like operations. Moreover, still pictures  
of high resolution can be played if they are included in  
the disc.  
Some playback operations of DVDs and Video CDs  
may be intentionally fixed by software manufacturers.  
As this unit plays DVDs and Video CDs according to  
disc content designed by the software manufacturer,  
some playback features of the unit may not be available  
or other functions may be added.  
Refer also to the instructions supplied with the DVDs  
and Video CDs. Some DVDs made for business pur-  
poses may not be played on the unit.  
Video CDs not equipped with PBC (Version 1.1)  
Operated in the same way as audio CDs, these discs  
allow playback of video pictures as well as sound, but  
they are not equipped with PBC.  
Regional code of the DVD player and DVDs  
This DVD player is designed and manufactured  
for playback of region “1” encoded DVD soft-  
®
1
HDCD (High Definition Compatible Digital )  
HDCD® (High Definition Compatible Digital®) is a  
recording system that has improved audio CD sound in  
dynamic range, sound field reproducibility and vocal  
acoustics.  
This DVD player is equipped with an HDCD decoder.  
The HDCD indicator illuminates when playing an  
HDCD-encoded audio CD.  
ware. The region code on the labels of some DVD discs  
indicates which type of player can play those discs. This  
unit can play only DVD discs labeled “1” or “ALL”. If you  
try to play any other discs, the message “Check Regional  
Code” will appear on the TV screen. Some DVD discs  
may not have a region code label even though their play-  
back is prohibited by area limits.  
, HDCD®, High Definition Compatible Digital® and  
Pacific Microsonicsare either registered trademarks or  
trademarks of Pacific Microsonics, Inc. in the United States  
and/or other countries. HDCD system manufactured under  
license from Pacific Microsonics, Inc. This product is cov-  
ered by one or more of the following patents: United States:  
5,479,168, 5,638,074, 5,640,161, 5,808,574, 5,838,274,  
5,854,600, 5,872,531 and 5,864,311. Australia: 669114.  
Other patents pending.  
Disc-related terms  
Title (DVD video discs only)  
The main film content or accompanying feature content  
or additional feature content, or music album.  
Each title is assigned a title reference number enabling  
you to locate it easily.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Use (Continued)  
Precautions  
Notes on Discs  
Handling discs  
Handling the unit  
Do not touch the playback side of the disc.  
Hold the disc by the edges so that fingerprints will not  
get on the surface.  
When shipping the unit  
The original shipping carton and packing materials  
come in handy. For maximum protection, re-pack the  
unit as it was originally packed at the factory.  
Do not stick paper or tape on the disc.  
When setting up the unit  
The picture and sound of a nearby TV, VCR, or radio  
may be distorted during playback. In this case, position  
the unit away from the TV, VCR, or radio, or turn off the  
unit after removing the disc.  
Storing discs  
To keep the exterior surfaces clean  
After playing, store the disc in its case.  
Do not expose the disc to direct sunlight or sources of  
heat, or leave it in a parked car exposed to direct sun-  
light, as there may be a considerable temperature  
increase inside the car.  
Do not use volatile liquids, such as insecticide spray,  
near the unit. Do not leave rubber or plastic products in  
contact with the unit for a long period of time. They will  
leave marks on the surface.  
Cleaning the unit  
Cleaning discs  
To clean the cabinet  
Fingerprints and dust on the disc can cause poor pic-  
ture quality and sound distortion. Before playing, clean  
the disc with a clean cloth. Wipe the disc from the cen-  
ter out.  
Use a soft, dry cloth. If the surfaces are extremely dirty,  
use a soft cloth lightly moistened with a mild detergent  
solution. Do not use strong solvents such as alcohol,  
benzine, or thinner, as these might damage the surface  
of the unit.  
To obtain a clear picture  
The DVD player is a high-tech, precision device. If the  
optical pick-up lens and disc drive parts are dirty or  
worn, the picture quality will be poor.  
Regular inspection and maintenance are recommended  
after every 1,000 hours of use. (This depends on the  
operating environment.)  
Do not use strong solvents such as alcohol, benzine,  
thinner, commercially available cleaners, or anti-static  
spray intended for older vinyl records.  
About Symbols  
For details, please contact your nearest dealer.  
About the  
symbol display  
Remote Control Operation Range  
” may appear on the TV screen during operation.  
Point the remote control at the remote sensor and  
press the buttons.  
Distance: About 16 ft (5 m) from the front of the  
remote sensor.  
Angle: About 30° in each direction of the front of the  
remote sensor.  
This icon means the function explained in this owner’s  
manual is not available on that specific DVD video disc.  
About the disc symbols for instructions  
A section whose title has one of the following symbol is  
applicable only to the disc represented by the symbol.  
Remote control battery installation  
DVD-V DVD Video discs  
DVD-A DVD Audio discs  
Detach the battery cover on the rear of  
the remote control, and insert two R03  
VCD2.0  
VCD1.1  
CD  
Video CDs with the PBC (playback control)  
function.  
(size AAA) batteries with  
aligned correctly.  
and  
Video CDs without the PBC (playback control)  
function.  
Caution  
Audio CDs.  
Do not mix old and new batteries. Never mix different  
types of batteries (standard, alkaline, etc.).  
MP3 MP3 discs.  
WMA discs.  
JPEG discs.  
WMA  
JPEG  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel and Display Window  
STANDBY  
Lights red when the  
DVD player is standby.  
Disc Tray  
Insert a disc here.  
Display window  
Shows the current  
status of the player.  
/
OPEN/CLOSE (  
)
Opens or closes the  
disc tray.  
DISC SKIP  
Moves to the next  
Remote Sensor  
POWER  
available disc tray.  
ON/STANDBY  
Switches the  
player ON and  
STANDBY.  
Reverse Skip/Scan (  
S
/
Q
)
Go to beginning of current  
chapter/track or to PREVIOUS chap-  
ter/track.  
Press and hold for two seconds for a  
fast reverse search.  
Forward Skip/Scan (  
R
/
T
)
Go to NEXT chapter/track.  
Press and hold for two seconds for  
a fast forward search.  
PLAY ( 2)  
Starts playback.  
DISC EX-CHANGE  
Changes a disc (other than the  
one playing) during playback  
STOP ( 9)  
Stops playback.  
PAUSE ( ; )  
Pause playback temporarily/ press repeatedly  
for frame-by-frame playback.  
ANGLE Lights when multi angles are  
present.  
A light will appear if a disc is in the  
disc tray. The current disc tray flashes.  
TITLE Indicates current title number  
DVD  
DVD video disc inserted  
CHP/TRK Indicates current chapter or track number  
Indicates total playing time/elapsed time  
PROG. Programmed playback active  
DVD A  
DVD audio disc inserted  
CD Audio CD inserted  
VCD Video CD inserted  
HD CD HDCD disc inserted  
RANDOM RANDOM  
playback active  
MP3 MP3 or WMA disc inserted  
Indicates current player function:  
Playback, Pause, etc.  
Indicates repeat  
mode  
MP3 VCD HD CD DVD A  
TITLE  
CHP/TRK  
PROG.  
RANDOM ALL  
A
B
1
2
5
3
4
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
MARKER •  
OPEN/CLOSE  
Marks any point during playback.  
Opens and closes the disc tray.  
SEARCH •  
ANGLE  
Displays MARKER SEARCH menu.  
Selects a DVD camera angle if  
available  
POWER  
Switches DVD Player ON and OFF.  
RANDOM  
Plays tracks in random order.  
AUDIO  
Selects an audio language (DVD) or  
an audio channel (CD).  
PROGRAM  
Enters to the program edit mode or  
exits from that.  
SUBTITLE  
Selects a subtitle language.  
CLEAR  
Removes a track number on the  
program list or a mark on the  
MARKER SEARCH menu.  
0-9 number buttons  
Selects numbered items in a menu.  
Reverse SKIP/SCAN ( S ) •  
Search backward*/ go to beginning  
of current chapter or track or go to  
previous chapter or track.  
• ZOOM  
Enlarges video image.  
• STOP ( 9)  
Stops playback.  
* Press and hold button for about  
two seconds.  
• PAUSE/STEP ( ;)  
Pauses playback temporarily/ press  
repeatedly for frame-by-frame  
playback.  
PLAY ( 2) •  
Starts playback.  
Forward SKIP/SCAN ( T ) •  
Search forward*/ go to next chap-  
ter or track.  
SELECT/ENTER  
Acknowledges menu selection.  
SLOW ( , / . )  
Reverse/ Forward slow playback.  
OSD  
Accesses On-Screen display.  
1/2/3/4 (left/right/up/down)  
- Selects an item in the menu.  
MENU  
Accesses menu on a DVD disc.  
• REPEAT  
Repeat chapter, track, title, group,  
all.  
TOP MENU •  
Displays the discs Top menu, if  
available.  
• A-B  
Repeat sequence.  
SETUP •  
Accesses or removes setup menu.  
• DISC SKIP  
RETURN •  
- Removes the setup menu.  
- Displays the menu of a video  
CD with PBC.  
Moves to the next available disc tray.  
Setting Remote control codes of Remote control  
• This remote control supports two remote control codes: C004 and C044.  
• When the unit is shipped from the factory, the remote control is set to C004.  
To set the remote control to C044, hold down both the STOP button and "2" number button on the remote control  
for at least five seconds.  
You can change the code of remote control only when NO DISC appears in the display window.  
To set the remote control back to C004, hold down both the STOP button and "1" number button on the  
remote control for at least five seconds.  
• Also set the remote control codes of the player to the same setting as the remote control.  
(This setting is set to C004, when the unit is shipped from the factory.) (page 28)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear Panel  
OPTICAL (Digital audio out jack)  
Connect to digital (optical) audio equipment.  
COAXIAL (Digital audio out jack)  
Connect to digital (coaxial) audio equipment.  
COMPONENT VIDEO OUT (Y, CB/PB, CR/PR)  
Connect to a TV with Y, CB/PB, CR/PR inputs.  
AUDIO OUT (Left/Right)  
Connect to an amplifier, receiver,  
or stereo system.  
**REMOTE CONTROL  
EXTERNAL/INTERNAL  
Switch  
* REMOTE CONTROL IN/OUT jack  
VIDEO OUT  
Connect to a TV with video inputs.  
5.1 CHANNEL AUDIO OUT  
Connect to a 5.1 channel receiver  
– center speaker connection  
– subwoofer connection  
– front speakers connections  
– rear (surround) speakers connections  
S-VIDEO OUT  
Connect to a TV with S-Video inputs.  
RS232C Terminal  
Control terminal for use by  
custom installers.  
AC Power Cord  
Plug into the power source.  
* REMOTE CONTROL IN/OUT jacks  
By connecting this DVD player to another Marantz audio component using a supplied System Control cable, you  
can remotely operate the components as a single system.  
• When connecting to component with a remote sensor, be sure to connect the “REMOTE CONTROL IN” jack of  
this DVD player to the “REMOTE CONTROL OUT” jack of the component with the remote sensor.  
• When connecting to component which is not equipped with a remote sensor, be sure to connect the component to  
the “REMOTE CONTROL OUT” jack of this DVD player.  
** Remote switch  
• When using this DVD player independently, set this switch to “INTERNAL”. When using this DVD player in a  
system with a Marantz receiver equipped with a remote sensor, set the switch to “EXTERNAL”.  
Caution  
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent  
damage to the unit.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
®
Progressive Scan (Color Stream pro) connection  
Tips  
If your television is a high-definition or “digital ready”  
television, you may take advantage of the DVD  
Player’s progressive scan output for the highest  
video resolution possible.  
Depending on your TV and other equipment you wish  
to connect, there are various ways you could connect  
the player. Use only one of the connections  
described below.  
If your TV does not accept the Progressive Scan for-  
mat, the picture will appear scrambled if you try  
Progressive Scan on the DVD Player.  
Please refer to the manuals of your TV, VCR, Stereo  
System or other devices as necessary to make the  
best connections.  
For better sound reproduction, connect the player’s  
AUDIO OUT jacks to the audio in jacks of your  
amplifier, receiver, stereo or audio/video equipment.  
See “Connecting to Optional Equipment”  
on page 11-12.  
Connect the COMPONENT VIDEO OUT jacks on  
1
the DVD Player to the corresponding in jacks on  
the TV using an optional Y, CB/PB, CR/PR cable (C).  
Connect the Left and Right AUDIO OUT jacks of  
2
the DVD Player to the audio left/right in jacks on the  
TV (A) using the supplied audio cables.  
Caution  
Make sure the DVD Player is connected directly to the  
TV. Tune the TV to the correct video input channel.  
– Do not connect the DVD Player’s AUDIO OUT jack to  
the phono in jack (record deck) of your audio system.  
– Do not connect your DVD Player via your VCR. The  
DVD image could be distorted by the copy protection  
system.  
Notes  
– Set the Progressive to “On” on the setup menu for  
progressive signal, see page 15.  
– Progressive scan does not work with the analog video  
connections (yellow VIDEO OUT and S-VIDEO OUT  
jack). (See “Video mode setting”, page28)  
Connecting to a TV  
Make one of the following connections, depending on  
the capabilities of your existing equipment.  
Rear of TV  
S-VIDEO  
INPUT  
COMPONENT VIDEO /  
PROGRESSIVE SCAN INPUT  
VIDEO  
INPUT  
AUDIO INPUT  
Video connection  
Connect the VIDEO OUT jack on the DVD Player to  
the video in jack on the TV using the video cable (V).  
Y
Pr  
Pb  
R
L
L
1
Connect the Left and Right AUDIO OUT jacks of  
2
the DVD Player to the audio left/right in jacks on the  
TV (A) using the audio cables.  
S-Video connection  
Connect the S-VIDEO OUT jack on the DVD Player  
to the S-Video in jack on the TV using the S-Video  
cable (S).  
S
C
A
V
1
Connect the Left and Right AUDIO OUT jacks of  
the DVD Player to the audio left/right in jacks on the  
TV (A) using the audio cables.  
2
®
Component Video (Color Stream ) connection  
Connect the COMPONENT VIDEO OUT jacks on  
the DVD Player to the corresponding in jacks on  
the TV using an Y, CB/PB, CR/PR cable (C).  
1
Connect the Left and Right AUDIO OUT jacks of  
the DVD Player to the audio left/right in jacks on the  
TV (A) using the audio cables.  
2
Rear of DVD player  
Notes  
– Refer to the owner’s manual of your TV as well.  
– Before you connect the DVD player to your TV, be  
sure to turn off the power and unplug both units from  
the wall outlet before making any connections.  
Caution  
Do not set the Digital Audio Output of this DVD player to  
“Dolby Digital” unless you are connecting the DIGITAL  
OUT jack of this DVD player to an AV decoder that has  
the Dolby Digital decoding function. High volume sound  
may damage your hearing as well as the speakers.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections (Continued)  
Connecting to Optional Equipment  
Rear of DVD player  
Connecting to an amplifier equipped with two  
channel analog stereo or Dolby Pro Logic ll/  
Pro Logic  
Connect the Left and Right AUDIO OUT jacks on the  
DVD Player to the audio left and right in jacks on your  
amplifier, receiver, or stereo system, using the audio  
cables (A).  
Connecting to an amplifier equipped with two  
channel digital stereo (PCM) or to an Audio/  
Video receiver equipped with a multi-channel  
decoder (Dolby Digital™, MPEG 2, or DTS)  
O
X
A
Connect one of the DVD Player’s DIGITAL AUDIO  
1
OUT jacks (OPTICAL O or COAXIAL X) to the cor-  
responding in jack on your amplifier. Use an option-  
al digital (optical O or coaxial X) audio cable.  
R
L
OPTICAL  
COAXIAL  
DIGITAL INPUT  
AUDIO INPUT  
You will need to activate the player’s digital output.  
2
(See “Digital Audio Output” on page 16).  
Amplifier (Receiver)  
Digital Multi-channel sound  
A digital multi-channel connection provides the best  
sound quality. For this you need a multi-channel  
Audio/Video receiver that supports one or more of the  
audio formats supported by your DVD Player (MPEG 2,  
Dolby Digital and DTS). Check the receiver manual and  
the logos on the front of the receiver.  
Caution:  
Due to the DTS Licensing agreement, the digital output  
will be in DTS digital out when DTS audio stream is  
selected.  
Notes  
If the audio format of the digital output does not match  
the capabilities of your receiver, the receiver will  
produce a strong, distorted sound or no sound at all.  
– Six Channel Digital Surround Sound via digital con-  
nection can only be obtained if your receiver is  
equipped with a Digital Multi-channel decoder.  
To see the audio format of the current DVD in the on-  
screen display, press AUDIO.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections (Continued)  
Connecting to Optional Equipment  
(Contimued)  
Notes  
– Refer to the owner’s manual of your audio system as  
well.  
– Before you connect the DVD player to other equip-  
ment, be sure to turn off the power and unplug all of  
the equipment from the wall outlet before making any  
connections.  
– If you place the DVD player near a tuner or radio, the  
radio broadcast sound might be distorted. In this  
case, move the DVD player away from the tuner and  
radio.  
– The output sound of the DVD player has a wide  
dynamic range. Be sure to adjust the receiver’s vol-  
ume to a moderate listening level. Otherwise, the  
speakers may be damaged by a sudden high volume  
sound.  
– Turn off the receiver before you connect or disconnect  
the DVD player’s power cord. If you leave the receiv-  
er power on, the speakers may be damaged.  
– When playing DTS-encoded discs (DVD video discs  
and audio CDs), excessive noise may be output from  
the analog stereo jacks.  
Analog connection to a multi-channel A/V receiver  
with 6 Channel connectors (Dolby Digital)  
This DVD Player contains a multi-channel decoder. This  
enables playback of DVDs recorded in Multi-channel  
Surround without the need for an optional decoder.  
Connect the CENTER and SUB WOOFER jacks for  
1
the Center speaker and the Subwoofer (C) to the  
corresponding in jacks on your receiver.  
Connect the Left and Right FRONT speaker jacks  
2
(F) to the corresponding in jacks on your receiver.  
Connect the Left and Right REAR speaker jacks  
3
(R) to the corresponding in jacks on your receiver.  
Make the appropriate Sound settings for Analog  
4
Output and Speaker Settings in the setup menu.  
See page 30.  
To avoid possible damage to the audio system, you  
should take proper precautions when the AUDIO OUT  
jacks of the DVD video player is connected to an  
amplification system. To enjoy DTS Digital Surround  
playback, an external 5.1 channel DTS Digital  
Surround decoder system must be connected to the  
DIGITAL OUT jack of the DVD video player.  
Rear of DVD player  
Caution  
Do not set the Digital Audio Output of this DVD  
player to “Dolby Digital” unless you are connecting  
the DIGITAL OUT jack of this DVD player to an AV  
decoder that has the Dolby Digital decoding func-  
tion. High volume sound may damage your hearing  
as well as the speakers.  
F
C
R
Center Subwoofer  
Front R  
Rear R  
Front L  
Rear L  
ANALOG 5.1CH  
AUDIO INPUT  
Amplifier (Receiver)  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation  
Temporary Feedback Field Icons  
General Explanation  
This manual gives basic instructions for operating the  
DVD Player. Some DVDs require specific operation or  
allow only limited operation during playback. When this  
TITLE  
Repeat Title  
CHAPT  
Repeat Chapter  
GROUP  
Repeat Group (DVD audio discs only)  
occurs, the symbol  
appears on the TV screen, indi-  
TRACK  
Repeat Track (non-PBC Video CDs and DVD  
cating that the operation is not permitted by the DVD  
Player or is not available on the disc.  
audio discs only)  
ALL  
Repeat All Tracks (non-PBC Video CDs only)  
On-Screen Display  
A
B
Repeat A-B  
General playback status can be displayed on the TV  
screen. Some items can be changed on the menu.  
OFF  
Repeat Off  
Resume play from this point  
Action prohibited or not available  
On-screen display operation  
Press OSD during playback.  
Notes  
1
2
Some discs may not provide all of the features on the  
on-screen display example shown below.  
If no button is pressed for 10 seconds, the on-screen  
display disappears.  
Press 3/4to select an item.  
The selected item will be highlighted.  
Press 1/2to change the setting of an item.  
3
The number buttons can be also be used for setting  
numbers (e.g., title number). For some functions,  
press SELECT/ENTER to execute the setting.  
DVD-V  
Items  
Function (Press 3/4to select desired item)  
Selection Method  
Title Number  
Shows the current title number and total number of  
1
/
2
, or  
1 /3  
1 /12  
titles, and skips to the desired title number.  
Numbers, SELECT/ENTER  
Chapter Number  
Time search  
Shows the current chapter number and total number of  
chapters, and skips to the desired chapter number.  
1
/
2
, or  
Numbers, SELECT/ENTER  
Shows the elapsed playing time, and  
searches the point by the elapsed time directly.  
0:20:09  
Numbers, SELECT/ENTER  
Audio language  
and Digital Audio  
Output mode  
1 ENG  
D
5.1 CH  
Shows the current audio soundtrack language,  
encoding method, and channel number, and  
changes the setting.  
1
/
2
, or  
AUDIO  
Subtitle language  
Shows the current subtitles language, and  
1 2  
, or  
SUBTITLE  
/
ABC  
OFF  
1 /1  
changes the setting.  
Angle  
Shows the current angle number and total number of  
angles, and changes the angle number.  
1
/
2
, or  
ANGLE  
Sound  
Shows the current sound mode (NORMAL or 3D SUR-  
ROUND), and changes the setting.  
1
/
2
NORM.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation (Continued)  
On-Screen Display (Continued)  
d
DVD-A  
Items  
Function (Press 3/4to select desired item)  
Selection Method  
Group Number  
Shows the current group number and total number  
1
/
2
, or  
2 /6  
1 /12  
of groups, and skips to the desired group number.  
Numbers, SELECT/ENTER  
Track Number  
Time search  
Shows the current track number and total number  
of tracks, and skips to the desired track number.  
1
/
2
, or  
Numbers, SELECT/ENTER  
Shows the elapsed playing time.(Display only)  
0:10:15  
_
DVD Audio  
Output mode  
Shows the current encoding method, and channel  
number, and changes the setting.  
1
1
/
2
, or  
PPCM  
5 CH  
AUDIO  
Shows the current subtitles language, and  
1 2  
, or  
SUBTITLE  
/
Subtitle language  
Page (or Angle)  
ABC  
OFF  
changes the setting.  
Shows the current page (or angle) number and total number  
of pages (or angle), and changes the page (or angle) number.  
1
/
2
, or  
1 /12  
or  
ANGLE  
1 /1  
VCD1.1  
VCD2.0  
Items  
Function (Press 3/4to select desired item)  
Selection Method  
Track Number  
Shows the current track number, total number of tracks  
and PBC On mode, and skip to the desired track number.  
1
/
2
, or  
1 /4  
Numbers, SELECT/ENTER  
Time  
Shows the elapsed playing time (Display only)  
0:20:09  
Audio Channel  
Shows the audio channel, and  
changes the audio channel.  
1
/
2
, or  
STER.  
AUDIO  
Sound  
Shows the current sound mode (NORMAL or 3D SUR-  
ROUND), and changes the setting.  
1
/
2
NORM.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation (Continued)  
Initial Settings  
Picture  
You can set your own Personal Preferences on the  
player.  
TV Aspect  
DVD-V  
DVD-A  
4:3 Letterbox: Select when a standard 4:3 TV is con-  
nected. Displays theatrical images with masking bars  
above and below the picture.  
4:3 Panscan: Select when a conventional TV set is  
connected. The video material formatted in the Pan &  
Scan style is played back in that style (Both sides of the  
picture are cut off).  
Initial Settings General Operation  
Press SETUP.  
The setup menu appears.  
1
Original  
English  
French  
Disc Audio  
Disc Subtitle  
Disc Menu  
16:9 Wide: Select when a 16:9 wide TV is connected.  
German  
Spanish  
Italian  
4:3 Letterbox  
4:3 Panscan  
16:9 Wide  
Rating  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
Country Code  
TV Aspect  
Chinese  
Polish  
Menu Language  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
Country Code  
Hungarian  
Other – – – –  
TV Aspect  
Menu Language  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
Press 3/4to select the desired item.  
2
The screen will show the current setting for the  
selected item, as well as alternate setting(s).  
Progressive Scan  
DVD-V  
DVD-A  
While the desired item is selected, press 2, then  
3/4to select the desired setting.  
Progressive Scan Video provides the highest quality  
pictures with less flickering.  
If you are using the COMPONENT VIDEO OUT jacks,  
but are connecting the DVD Player to a standard (ana-  
log) television, set Progressive Scan to Off.  
If you are using the Component Video jacks for  
connection to a TV or monitor that is compatible with a  
progressive scan signal, set Progressive Scan to On.  
3
4
5
Press SELECT/ENTER to confirm your selection.  
Some items require additional steps.  
Press SETUP, RETURN, or PLAY to exit the  
setup menu.  
Language  
Disc Language  
DVD-V  
DVD-A  
Off  
On  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
Select a language for the disc’s Menu, Audio, and  
Subtitle.  
Original : The original language set for the disc is selected.  
Other : To select another language, press number buttons to  
enter the corresponding 4-digit number according to the lan-  
guage code list on page 31. If you enter the wrong language  
code, press CLEAR.  
Country Code  
TV Aspect  
Menu Language  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
Original  
English  
French  
Disc Audio  
Disc Subtitle  
Disc Menu  
German  
Spanish  
Italian  
Rating  
Country Code  
TV Aspect  
Caution  
Chinese  
Polish  
Menu Language  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
Once the setting for progressive scan output is entered, an  
image will only be visible on a progressive scan compatible  
TV or monitor. If you set Progressive Scan to On in error, you  
must reset the unit. Press STOP to stop any disc that is play-  
ing. Next, press STOP again and hold it for five seconds  
before releasing it. The video output will be restored to the  
standard setting, and a picture will once again be visible on a  
conventional analog TV or monitor.  
Hungarian  
Other – – – –  
Menu Language  
Select a language for the setup menu. This is the menu  
you see when you press SETUP.  
English  
Spanish  
French  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
Country Code  
TV Aspect  
Menu Language  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation (Continued)  
Sound  
Others  
Digital Audio Output  
The DRC, Vocal, PBC and Auto Play settings can  
be changed.  
Press 3/4to select the desired item and press  
SELECT/ENTER. The setting of the selected item is  
changed between On and Off.  
Each DVD disc has a variety of audio output options.  
Set the player’s Digital Audio Output according to the  
type of audio system you use.  
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM”  
if you connected the DVD Player’s DIGITAL OUT jack to  
a Dolby Digital decoder (or an amplifier or other equip-  
ment with a Dolby Digital decoder).  
Stream/PCM: Select “Stream/PCM” if you connected  
the DVD Player’s DIGITAL OUT jack to an amplifier or  
other equipment with a DTS decoder, Dolby Digital  
decoder or MPEG decoder.  
PCM: Select when connected to a 2-channel digital  
stereo amplifier. The DVD player outputs sounds in the  
PCM 2ch format when you play a DVD video disc  
recorded on the Dolby Digital, HDCD, MPEG1, or  
MPEG2 recording system.  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
DRC  
On  
On  
On  
Off  
Vocal  
PBC  
Auto Play  
Country Code  
TV Aspect  
Menu Language  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
Dynamic Range Control (DRC)  
DVD-V  
With the DVD format, you can hear a program’s sound-  
track in the most accurate and realistic presentation  
possible, thanks to digital audio technology. However,  
you may wish to compress the dynamic range of the  
audio output (the difference between the loudest sounds  
and the quietest ones). Then, you may listen to a movie  
at a lower volume without losing clarity of sound. Set  
DRC to On for this effect.  
DOLBY  
Disc Audio  
Disc Subtitle  
Disc Menu  
Rating  
DIGITAL /PCM  
Stream/PCM  
PCM  
Country Code  
Sample Freq.  
48 KHz  
TV Aspect  
Menu Language  
96KHz  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
Vocal  
DVD-V  
Set Vocal to On only when a multi-channel karaoke  
DVD is playing. The karaoke channels on the disc will  
mix into normal stereo sound.  
Sample Frequency  
To change the Sample Frequency setting, first select  
the desired Digital Audio Output as indicated as above.  
If your receiver or amplifier is NOT capable of handling  
96KHz signals, select 48KHz. When this choice is  
made, this unit will automatically convert any 96KHz  
signals to 48KHz so your system can decode them.  
If your receiver or amplifier is capable of handling  
96KHz signals, select 96KHz. When this choice is  
made, this unit will pass each type of signal through  
without any further processing.  
VCD2.0  
PBC  
Set Playback Control (PBC) to On or Off.  
On: Video CDs with PBC are played according to the PBC.  
Off: Video CDs with PBC are played the same way as Audio  
CDs.  
Auto Play  
DVD-V  
You can set up the DVD Player so a DVD disc automat-  
ically starts playing whenever the DVD is inserted.  
If Auto Play mode is set to On, this DVD player will  
search a title that playback time is long most and then  
play back the title automatically.  
On: Auto Play function is activated.  
Off: Auto Play function is not activated.  
5.1 Speaker settings  
DVD-V  
DVD-A  
Select speaker settings, including volume balance and  
delay time, or test the speaker settings.  
Speaker settings are only active on the Analog Multi-  
Channel Output. (See “Speaker Settings”, page 30.)  
Disc Audio  
Disc Subtitle  
R
R
Disc Menu  
Rating  
Note  
Front L  
Volume  
Size  
The Auto Play function may not work for some DVDs.  
Country Code  
0 dB  
Large  
1 ft  
TV Aspect  
Menu Language  
Distance  
Test  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
Return  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Operation (Continued)  
Parental Control  
DVD-V  
Country Code  
Enter the code of a country/area whose standards were  
used to rate the DVD video disc, referring to the list  
(See “Country Code List”, page 32.).  
Rating  
DVD-V  
Movies on DVDs may contain scenes not suitable for  
children. Therefore, discs may contain Parental Control  
information that applies to the complete disc or to  
certain scenes on the disc. These scenes are rated  
from 1 to 8, and alternatively, more suitable scenes are  
available for selection on some discs. Ratings are  
country-dependent. The Parental Control feature allows  
you to prevent discs from being played by your children  
or to have certain discs played with alternative scenes.  
Disc Audio  
Code Set  
Disc Subtitle  
Disc Menu  
U
S
Rating  
Country Code  
TV Aspect  
Menu Language  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
8
Disc Audio  
7
Disc Subtitle  
6
Disc Menu  
Select Country Code using the 3/4buttons on  
the setup menu.  
5
Rating  
1
4
Country Code  
3
TV Aspect  
2 While Country Code is selected, press 2.  
2
Menu Language  
1
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
Unlock  
Change  
3 Follow step 3 of “Rating” on left.  
4 Select the first character using the 3/4buttons.  
Select “Rating” on the Setup menu using the  
1
3/4buttons.  
Shift the cursor using 2 button and select the  
5
6
second character using 3/4buttons.  
2 While “Rating” is selected, press 2.  
Press SELECT/ENTER to confirm your country  
code selection, then press SETUP to exit the  
menu.  
When you have not entered a password yet.  
3
Enter a 4-digit password using the numbered but-  
tons to create a personal 4-digit security password.  
then press SELECT/ENTER. Enter the 4-digit pass-  
word again and press SELECT/ENTER to verify.  
When you have already entered a password;  
Enter a 4-digit password using the numbered but-  
tons to confirm the personal 4-digit security pass-  
word, then press SELECT/ENTER.  
Note  
Confirmation of the 4-digit password is necessary when  
the code is changed (see “Changing the 4-digit code”  
below.).  
Changing the 4-digit code  
1 Follow Steps 1-2 as shown above to the left (Rating).  
2 Enter the old code, then press SELECT/ENTER.  
3 Select Change using 3/4buttons then press  
SELECT/ENTER.  
4 Enter the new 4-digit code, then press  
SELECT/ENTER.  
If you make a mistake before pressing SELECT/ENTER,  
press CLEAR and enter 4-digit security password again.  
Select a rating from 1 to 8 using the 3/4but-  
tons. One (1) has the least playback restrictions.  
Eight (8) has the most playback restrictions.  
Unlock: If you select Unlock, Parental Control is  
not active. The disc will play in full.  
4
5 Enter exactly the same code a second time and veri-  
fy by pressing SELECT/ENTER.  
Ratings 1 to 8: Some discs contain scenes not  
suitable for children. If you set a rating for the play-  
er, all disc scenes with the same rating or lower will  
be played. Higher rated scenes will not be played  
unless an alternative scene is available on the disc.  
The alternative must have the same rating or a  
lower one. If no suitable alternative is found, play-  
back will stop. You must enter the 4-digit password  
or change the rating level in order to play the disc.  
6 Press SETUP to exit the menu.  
If you forget your 4-digit code  
If you forget your password, to clear the current pass-  
word, follow the procedure below.  
1 Press SETUP to display the setup menu.  
2 Use the Number buttons to enter the 6-digit number  
“210499”.  
The 4-digit password is cleared. “P CLr” appears on the  
display for a moment.  
Enter a new code as shown above to the left (Rating).  
Press SELECT/ENTER to confirm your rating  
5
selection, then press SETUP to exit the menu.  
3
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with DVD and Video CD  
Playing a DVD and Video CD  
Notes  
If Parental Control is set and the disc is not within the  
Rating settings (not authorized), the 4-digit code must  
be entered and/or the disc must be authorized (see  
“Parental Control, on page 17).  
VCD2.0  
VCD1.1  
Playback Setup  
DVD-V  
DVD-A  
Turn on the TV and select the video input source con-  
nected to the DVD player.  
Audio system: Turn on the audio system and select  
the input source connected to the DVD player.  
DVDs may have a region code.  
Your player will not play discs that have a region code  
different from your player. The region code for this  
player is 1 (one).  
Press OPEN/CLOSE to open the disc tray.  
1
2
Exchanging discs during playback  
Load your chosen disc in the tray, with the  
playback side down.  
Press DISC EX-CHANGE on the front panel during  
playback to open the disc tray.  
Press DISC SKIP to rotate the disc trays to the  
desired position. The carousel will rotate clockwise by  
one disc increments.  
Do not load a disc in the  
left and light side position.  
Center position  
Exchange the discs and press DISC EX-CHANGE or  
OPEN/CLOSE to close the disc tray.  
• Discs can be loaded one at a time by pressing  
DISC SKIP to rotate the carousel.  
Note  
The disc tray presently loaded in the play position can  
not be exchanged.  
Press OPEN/CLOSE to close the tray.  
3
READING appears on the TV screen, and playback  
starts automatically. If playback does not start,  
press PLAY.  
Skipping discs  
Press DISC SKIP during play or when playback is stopped.  
In some cases, the disc menu might appear  
instead.  
Notes  
When DISC SKIP is pressed, the disc tray rotates and  
playback begins from the beginning of the next disc.  
If there is no disc on the next disc tray, the following  
disc tray will be selected.  
When DISC SKIP is pressed during playback of disc  
5, playback of disc 1 will start.  
If a menu screen is displayed  
The menu screen may be displayed first after loading a  
DVD or Video CD which offer a menu.  
DVD-V  
Exchanging the disc and starting playback  
1.Press OPEN/CLOSE during playback or when play-  
back is stopped.  
Play stops (if pressed during playback), the disc tray opens  
and the disc that was in the play position comes to the front.  
2.Exchange the disc.  
3.Press OPEN/CLOSE or PLAY again.  
The tray closes and playback begins (with the disc  
that was in front).  
Use the 1/2/3/4 buttons to select the title/chapter you  
want to view, then press SELECT/ENTER to start play-  
back.  
Press TOP MENU or MENU to return to the menu  
screen.  
DVD-A  
Use the 1/2/3/4 buttons to select an option you want,  
then press SELECT/ENTER to view the option.  
After operation  
VCD2.0  
When the unit is not in use, remove the disc and press  
POWER to turn off the DVD player.  
Use the number buttons to select the track you want  
to view.  
Press RETURN to return to the menu screen.  
Menu setting and the exact operating procedures for  
using the menu may differ depending on the disc.  
Follow the instructions on the each menu screen.  
You also may set PBC to Off under setup. See page  
16.  
Notes  
Do not move the DVD player during playback. Doing  
so may damage the disc and the DVD player.  
Use the OPEN/CLOSE button on the remote control  
or DVD player to open and close the disc tray. Do not  
push the disc tray while it is moving. Doing so may  
cause the DVD player to malfunction.  
Caution  
Do not push up the disc tray or put any objects other  
than discs on the disc tray. Doing so may cause the  
DVD video player to malfunction.  
Keep your fingers well clear of the disc tray as it is  
closing. Be especially careful with children’s fingers  
around the closing disc tray as there is a risk of  
personal injury.  
Do not touch the loading drawer and carousel while  
they are in motion, and do not attempt to rotate the  
carousel by hand; doing so could result in incorrect  
operation of the player and/or damage to the discs.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with DVD and Video CD  
General Features  
Still Picture and Frame-by-Frame playback  
VCD2.0  
VCD1.1  
DVD-V  
DVD-A  
1 Press PAUSE/STEP during playback.  
The player will now go into PAUSE mode.  
2 You can advance the picture frame-by-frame by  
pressing PAUSE/STEP repeatedly on the remote con-  
trol.  
Note  
Unless stated otherwise, all operations described use  
the remote control. Some features may also be  
available on the Setup menu.  
Moving to another TITLE/GROUP  
Note  
1 /3  
1/6  
DVD-V  
DVD-A  
When using a DVD audio disc that includes pictures,  
this operation may be permitted in some picture  
segments.  
When a disc has more than one title/group, you can  
move to another title/group as follows:  
Press OSD, then press the appropriate numbered  
button (0-9) to select a title/group number.  
VCD2.0  
VCD1.1  
Slow Motion  
DVD-V  
DVD-A  
1 Press SLOW t or T during playback.  
The player will enter SLOW mode.  
Moving to another CHAPTER/TRACK  
VCD1.1  
2 Use the SLOW t or T to select the required speed:  
t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or  
T 1/16, T 1/8, T 1/4 or T 1/2 (forward).  
3 To exit slow motion mode, press PLAY.  
DVD-V  
DVD-A  
1 /12  
1 /3  
1 /12  
When a title on a disc has more than one chapter or a  
disc has more than one track, you can move to another  
chapter/track as follows:  
Notes  
Press SKIP/SCAN . or > briefly during  
playback to select the next chapter/track or to return  
to the beginning of the current chapter/track.  
Press . twice briefly to step back to the previous  
chapter/track.  
To go directly to any chapter/track during DVD  
playback, press OSD. Then, press 3/4to select the  
chapter/track icon. Then, enter the chapter/track  
number using the numbered buttons (0-9).  
Slow motion playback in reverse is not applicable for  
Video CD.  
When using a DVD audio disc that includes pictures,  
this operation may be permitted in some picture  
segments.  
VCD2.0  
VCD1.1  
Random Karaoke DVD  
1 Press RANDOM during playback or in stop mode.  
The unit automatically begins Random Playback and  
“RANDOM(1-3)” appears on the display window.  
• RANDOM1: Plays all the tracks on a single disc in random  
order and then stops.  
Note  
For two-digit numbers, press the numbered buttons  
(0-9)in rapid succession.  
• RANDOM2: Plays all the tracks on current disc in  
random order and then plays all the tracks on each suc-  
ceeding disc in random order and then stops.  
• RANDOM3: Plays 2 tracks randomly from a disc and then  
plays 2 tracks randomly from a different disc until all  
tracks on all discs have been played.  
VCD2.0  
VCD1.1  
Search  
DVD-V  
DVD-A  
1 Press and hold SKIP/SCAN . or > for about  
two seconds during playback.  
The player will now go into SEARCH mode.  
2 Press and hold SKIP/SCAN . or > repeatedly  
to select the required speed: mX2, mX4, mX16,  
mX100 (backward) or MX2, MX4, MX16,  
MX100 (forward).  
2 To return to normal playback, press RANDOM until  
“RANDOM” disappears on the display window.  
Tips  
With a Video CD, the Search speed changes: mX2,  
mX4, mX8, (backward) or MX2, MX4, MX8,  
(forward).  
By pressing SKIP/SCAN > during Random playback,  
the unit selects another title (track) and resumes  
Random playback.  
3 To exit SEARCH mode, press PLAY.  
Note  
Notes  
When using a DVD audio disc that includes pictures,  
this operation may be permitted in some picture  
segments.  
This function only works with DVD Karaoke discs and  
video CD without PBC.  
DVD karaoke works only RANDOM 1 function.  
On a Video CD with PBC, you must set PBC to Off on  
the setup menu to use the Random function. See  
page 16.  
VCD2.0  
VCD1.1  
Pause  
DVD-V  
DVD-A  
1 Press PAUSE/STEP during playback.  
2 To return to playback, press PLAY.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with DVD and Video CD  
General Features (continued)  
0:20:09  
-:--:--  
Time Search  
DVD-V  
VCD2.0  
VCD1.1  
Repeat A-B  
DVD-V  
DVD-A  
The Time Search function allows you to start playing at  
any chosen time on the disc.  
A
*
A
B
OFF  
1 Press OSD during playback. The on-screen display  
appears on the screen.  
The Time Search box shows the elapsed playing time of the  
current disc.  
To repeat a sequence in a title or group:  
1 Press A-B at your chosen starting point.  
“ A * ” appears briefly on the TV screen.  
2 Within 10 seconds, press 3/4to select the Time  
Search icon in the on-screen display.  
The “-:--:--” appears in the Time Search box.  
2 Press A-B again at your chosen end point.  
“A B” appears briefly on the TV screen, and the repeat  
sequence begins (“AsB” appears the display window).  
3 Within 10 seconds, use the number buttons to enter  
the required start time. Enter hours, minutes, and sec-  
onds from left to right in the box.  
If you enter the wrong numbers, press CLEAR to remove the  
numbers you entered. Then enter the correct numbers.  
3 To cancel the sequence, press A-B.  
VCD2.0  
VCD1.1  
Repeat  
DVD-V  
DVD-A  
TITLE  
GROUP  
TRACK  
CHAPT  
ALL  
OFF  
4 Within 10 seconds, press SELECT/ENTER to confirm  
the start time.  
Playback starts from the selected time on the disc. If you enter  
an invalid time, playback will continue from the current point.  
DVD Video Discs - Repeat Chapter/Title/All/Off  
1 To repeat the currently playing chapter, press  
REPEAT.  
The Repeat Chapter icon appears on the TV screen.  
3D SUR  
NORM.  
VCD2.0 VCD1.1  
DVD-V  
3D Surround  
2 To repeat the title currently playing, press REPEAT a  
second time.  
The Repeat Title icon appears on the TV screen.  
This unit can produce a 3D Surround effect, which  
simulates multi-channel audio playback from two  
conventional stereo speakers, instead of the five or  
more speakers normally required to listen to multi-  
channel audio from a home theater system.  
3
To repeat entire all disc contents, press REPEAT a third time.  
The Repeat All icon appears on the TV screen.  
4 To exit Repeat mode, press REPEAT a fourth time.  
The Repeat Off icon appears on the TV screen.  
1 Press OSD during playback.  
2 Press 3 or 4 to select the sound option.  
DVD Audio Discs - Repeat Track/Group/All/Off  
The sound option will be highlighted.  
1 To repeat the currently playing track, press REPEAT.  
The Repeat Track icon appears on the TV screen.  
3 Press 1 or 2 to to select “3D SUR”.  
To turn off the 3D Surround effect, select “NORM”.  
2 To repeat the group currently playing, press REPEAT  
a second time.  
The Repeat Group icon appears on the TV screen.  
VCD2.0  
VCD1.1  
Zoom  
DVD-V  
DVD-A  
3
To repeat entire all disc contents, press REPEAT a third time.  
The Repeat All icon appears on the TV screen.  
The Zoom function allows you to enlarge the video  
image and to move through the enlarged image.  
4 To exit Repeat mode, press REPEAT a fourth time.  
The Repeat Off icon appears on the TV screen.  
1 Press ZOOM during playback or still playback to acti-  
vate the Zoom function.  
If you press ZOOM repeatedly, the magnification level  
increases up to six steps.  
Video CDs - Repeat Track/Disc/All/Off  
1 To repeat the track currently playing, press REPEAT.  
The Repeat Track icon appears on the TV screen.  
2 Use the 1/2/3/4buttons to move through the  
zoomed picture.  
2 To repeat the disc currently playing, press REPEAT a  
second time.  
The Repeat Disc icon appears on the TV screen.  
3 Press CLEAR to resume normal playback or return to  
the paused image.  
3
To repeat entire all disc contents, press REPEAT a third time.  
The Repeat All icon appears on the TV screen.  
Note  
The zoom function may not work for some DVDs.  
4 To exit Repeat mode, press REPEAT a fourth time.  
The Repeat Off icon appears on the TV screen.  
Note  
On a Video CD with PBC, you must set PBC to Off on the  
setup menu to use the Repeat function. See page 16.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with DVD and Video CD  
General Features (continued)  
DVD-V  
DVD-A  
Special DVD Features  
VCD2.0  
VCD1.1  
DVD-V  
Marker Search  
Checking the contents of DVD discs:  
Menus  
DVDs may offer menus that allow you to access special  
features. To use the disc menu, press MENU. Then,  
press the appropriate number button to select an option.  
Or, use the 1/2/3/4buttons to highlight your selection,  
then press SELECT/ENTER.  
MARKER SEARCH  
1/9  
You can start playback from a memorized point. Up to  
nine points can be memorized.  
To enter a mark, follow these steps.  
1 During disc playback, press MARKER when  
playback reaches the spot that you want to  
memorize.  
The Marker icon will appear on the TV screen briefly.  
Title Menu  
DVD-V  
DVD-A  
2
Repeat step 1 to enter up to nine Marker points on a disc.  
1 Press TOP MENU.  
To Recall a Marked Scene  
1 During disc playback, press SEARCH.  
The MARKER SEARCH menu will appear on the screen.  
If the current title has a menu, the menu will appear on the  
screen. Otherwise, the disc menu may appear.  
2 The menu can list camera angles, spoken language  
and subtitle options, and chapters for the title.  
2 Within 10 seconds, press 1/2 to select a Marker  
number that you want to recall.  
3 To remove the title menu, press TOP MENU again.  
3 Press SELECT/ENTER.  
Playback will start from the Marked scene.  
Disc Menu  
DVD-V  
DVD-A  
1 Press MENU.  
4 To remove the MARKER SEARCH menu, press  
SEARCH.  
The disc menu is displayed.  
2 To remove the disc menu, press MENU again.  
To clear a Marked Scene  
1 /1  
1 During disc playback, press SEARCH.  
DVD-V  
DVD-A  
Camera Angle  
The MARKER SEARCH menu will appear on the screen.  
If the disc contains scenes recorded at different camera  
angles, you can change to a different camera angle  
during playback.  
2 Press 1/2 to select the Marker number that you want  
to erase.  
3 Press CLEAR.  
Press ANGLE repeatedly during playback to select a  
desired angle.  
The Marker number will be erased from the list.  
4 Repeat steps 2 and 3 to erase additional Marker  
The number of the current angle appears on the display.  
numbers.  
Changing the Audio Language  
5 To remove the MARKER SEARCH menu, press  
1
1 ENG  
D
SEARCH.  
PPCM  
5 CH  
5.1 CH  
DVD-V  
DVD-A  
Press AUDIO repeatedly during playback to hear a dif-  
ferent audio language or audio track.  
VCD2.0  
VCD1.1  
Changing the Audio Channel  
Press AUDIO repeatedly during playback to hear a dif-  
ferent audio channel (STER., LEFT or RIGHT).  
ABC  
1 ENG  
DVD-V  
DVD-A  
Subtitles  
Press SUBTITLE repeatedly during playback to see the  
different subtitle languages.  
Note  
If  
appears, the feature is not available on the disc.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with DVD and Video CD  
DVD-A  
DVD Audio Discs  
1 /12  
Viewing another PAGE  
DVD-A  
Since DVD Audio discs can hold a lot of content, there  
are various ways to see what’s available on the disc.  
1 Press OSD during playback.  
DVD Audio is a new disc format building on the success  
of DVD to provide high quality, uncompressed, multi-  
channel audio for a new experience in audio quality. A  
DVD Audio disc can be identified by the DVD audio logo  
on the disc jacket or on the disc itself.  
2 Press 3/4to select Page icon.  
3 Press 1/2 to select a page number.  
What appears on the screen will vary from disc to disc  
because the information available depends upon the way the  
disc was created.  
DVD Audio can provide higher quality stereo than Audio  
CDs with a sampling rate of up to 192kHz (compared to  
44.1kHz for CDs). DVD Audio digital sound can be  
delivered with up to 24 bits of data (compared to 16 bits  
for a standard CD).  
Note  
Since the authoring of DVD Audio Discs varies, some of  
the on-screen display choices might not be available for  
the disc you’re playing.  
A typical DVD Audio disc contains up to seven times the  
data capacity of a CD. This additional space is used for  
music, either Advanced Resolution multi-channel sound  
quality that is closer to the artist’s master recording or  
for longer recordings. Many DVD Audio discs contain  
on-screen text, such as artist biographies, playlists, or  
lyrics. Some DVD Audio discs contain photo galleries or  
video clips.  
Note  
To enjoy maximum sound quality and surround effect of  
DVD Audio, you must use 5.1 channel analog audio output  
(5.1CH AUDIO OUT jacks on the DVD Player). If you use  
the DIGITAL OUT (OPTICAL or COAXIAL) for your audio  
connection, the sound will only be similar to CD-quality  
sound even though you’re playing a DVD Audio disc.  
1/6  
Moving to another GROUP  
DVD-A  
Some DVD Audio discs divide content into different  
groups. Your player enables you to quickly access dif-  
ferent groups during playback via the on-screen display.  
1 Press OSD during playback on in stop mode.  
2 Press 3/4to select Group icon.  
3 Press 1/2 or the numbered buttons (0-9) to select a  
group number.  
Note  
Sometimes the author of the disc creates hidden con-  
tent that can only be accessed by entering a password.  
If the lock icon appears on the TV screen, enter the  
password (sometimes you’ll find it on the disc’s jacket  
cover or on a web site). This password control isn’t dic-  
tated by your DVD Player — it is a function of the disc.  
Since the authoring of DVD Audio Discs varies, some of  
the on-screen display choices might not be available for  
the disc you’re playing.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with Audio CD and MP3/WMA Disc  
Notes on MP3/WMA Recordings  
Playing an Audio CD and MP3/WMA Disc  
About MP3  
CD  
MP3  
WMA  
An MP3 file is audio data compressed by using the  
MPEG1 audio layer-3 file-coding scheme. We call  
files that have the “.mp3” file extension “MP3 files”.  
The player can not read an MP3 file that has a file  
extension other than “.mp3”.  
The DVD Player can play MP3/WMA formatted record-  
ings on CD-ROM, CD-R or CD-RW discs.  
Before playing MP3/WMA recordings, read the notes on  
MP3/WMA Recordings on right.  
Insert a disc and close the tray.  
About WMA(Window Media Audio)  
An WMA file is a Microsoft audio compression  
technology.  
WMA(Windows Media Audio) offers double the audio  
compression of the MP3 format.  
1
Audio CD; Audio CD menu appears on the TV  
screen go to step 4.  
MP3/WMA disc; The MP3/WMA-JPEG choice  
menu appears on the TV screen. Go to step 2  
MP3 WMA  
JPEG  
Microsoft, Windows Media, and the Windows  
Logo are trademarks or registered trademarks  
of Microsoft Corporation in both the United  
States and other countries  
Press 3/4to select the MP3/WMA then press  
2
SELECT/ENTER.  
MP3/WMA Disc compatibility with this player is  
The MP3/WMA menu appears on the TV screen.  
Press RETURN to move to the MP3/WMA-JPEG  
choice menu.  
limited as follows:  
1. Sampling Frequency / only at 44.1kHz (MP3),  
22.05 - 44.1kHz (WMA)  
2. Bit rate / within 32 - 320kbps (MP3),  
32 - 128kbps (WMA)  
Program  
MP3/WMA  
TRACK 1.mp3  
TRACK 2.mp3  
TRACK 3.mp3  
TRACK 4.mp3  
TRACK 5.mp3  
TRACK 6.mp3  
TRACK 7.mp3  
TRACK 8.mp3  
3. CD-R physical format should be “ISO 9660”  
4. If you record MP3/WMA files using the software  
which cannot create a FILE SYSTEM, for example  
“Direct-CD” etc., it is impossible to playback  
MP3/WMA files. We recommend that you use “Easy-  
CD Creator”, which creates an ISO9660 file system.  
5. A single session disc requires MP3/WMA files in the  
first track. If there is no MP3/WMA file in the 1st  
track, it cannot playback MP3/WMA files. If you wish  
to playback MP3/WMA files, format all the data in  
the disc or use a new one.  
6. File names should be named using 8 letters or less  
and must incorporate “.mp3” or “.wma” extension  
e.g. “********.MP3” or “********.WMA”.  
7. Do not use special letters such as “/ : * ? “ < > ” etc.  
8. Total number of files on the disc should be less than  
650.  
Clear All  
OFF  
2
00:00  
1
Press 3/4 to select a folder, and SELECT/ENTER.  
A list of files in the folder appears.  
3
4
Press 3/4to select a track then press PLAY or  
SELECT/ENTER.  
Playback starts.  
During playback, the current track’s elapsed playing  
time will appear on the display window and menu.  
Playback will stop at the end of the disc.  
Press TOP MENU to move to the next page.  
Press MENU to move to the previous page.  
This DVD player requires discs/recordings to meet  
certain technical standards in order to achieve optimal  
playback quality. Pre-recorded DVDs are automatically  
set to these standards. There are many different types  
of recordable disc formats (including CD-R containing  
MP3 or WMA files). That require certain pre-existing  
conditions (see above) to insure compatible playback.  
Program  
CD  
1
Program  
MP3/WMA  
2
3  
4
5
TRACK 1.mp3  
TRACK 01  
TRACK 02  
TRACK 03  
TRACK 04  
TRACK 05  
TRACK 06  
TRACK 07  
TRACK 2.mp3  
TRACK 3.mp3  
TRACK 4.mp3  
TRACK 5.mp3  
TRACK 6.mp3  
TRACK 7.mp3  
TRACK 8.mp3  
Clear All  
OFF  
Clear All  
NORM.  
2
3
0: 56: 18  
STER.  
00:00  
1
Customers should also note that permission is  
required in order to download MP3/WMA files and  
music from the Internet. Our company has no right  
to grant such permission. Permission should  
always be sought from the copyright owner.  
Audio CD menu  
MP3/WMA menu  
Tip  
If you are in a file list and want to return to the Folder  
list, use the 3/4to highlight and press  
SELECT/ENTER to return to the previous menu screen.  
Caution  
If you record a disc using a personal computer, even if it  
is recorded in a compatible format, there are cases in  
which it may not play because of the settings of the  
application software used to create the disc. (Check with  
the software publisher for more detailed information.)  
5 To stop playback at any other time, press STOP.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with Audio CD and MP3/WMA Disc (Continued)  
CD  
MP3  
CD  
WMA  
Pause  
Random with Audio CD  
1 Press PAUSE/STEP during playback.  
2 To return to playback, press PLAY or press  
PAUSE/STEP again.  
1 Press RANDOM during playback or in stop mode.  
The unit automatically begins Random Playback and  
“RANDOM(1-3)” appears on the display window.  
• RANDOM1: Plays all the tracks on a single disc in random  
order and then stops.  
• RANDOM2: Plays all the tracks on current disc in  
random order and then plays all the tracks on each suc-  
ceeding disc in random order and then stops.  
CD  
MP3  
WMA  
Moving to another Track  
Press SKIP/SCAN . or > briefly during  
playback to go to the next track or to return to the  
beginning of the current track.  
Press SKIP/SCAN . twice briefly to step back to  
the previous track.  
• RANDOM3: Plays 2 tracks randomly from a disc and then  
plays 2 tracks randomly from a different disc until all  
tracks on all discs have been played.  
2 To return to normal playback, press RANDOM until  
“RANDOM” disappears on the display window.  
In case of audio CD, to go directly to any track, enter  
the track number using the numbered buttons (0-9)  
during playback.  
CD  
Repeat A-B  
CD  
MP3  
WMA  
Search  
To repeat a sequence.  
1 During disc playback, press A-B at your chosen start-  
1 Press and hold SKIP/SCAN . or > for about  
two seconds during playback.  
The player will now go into SEARCH mode.  
ing point.  
The Repeat icon and “ * ” appears on the menu screen.  
A
2 Press A-B again at your chosen end point.  
The Repeat icon and “A B” appears on the menu screen,  
and the sequence begins to play repeatedly.  
2 Press and hold SKIP/SCAN . or > repeatedly  
to select the required speed: mX2, mX4, mX8  
(backward) or MX2, MX4, MX8 (forward).  
Search speed and direction are indicated on the menu  
screen.  
3 To exit the sequence and return to normal play, press  
A-B again.  
The Repeat icon and “OFF” appears on the menu screen.  
3 To exit SEARCH mode, press PLAY.  
CD  
3D Surround  
MP3  
WMA  
Random with MP3/WMA Disc  
This unit can produce a 3D Surround effect, which  
simulates multi-channel audio playback from two  
conventional stereo speakers, instead of the five or  
more speakers normally required to listen to multi-  
channel audio from a home theater system.  
1 Press RANDOM during playback or when playback is  
stopped.  
The unit automatically begins Random Playback and  
RANDOM or “RAND.” appears on the display window  
and menu screen.  
1 Press OSD during playback.  
2 Use 1 or 2 to select the sound option.  
2 To return to normal playback, press RANDOM repeat-  
edly until RANDOM or “RAND.” disappears on the  
display window and menu screen.  
The sound option will be highlighted.  
3 Use 3 or 4 to to select “3D SUR”.  
To turn off the 3D Surround effect, select “NORM”.  
MP3  
WMA  
Repeat Track/All/Off  
1 To repeat the track currently playing, press REPEAT.  
The Repeat icon and “TRACK” appears on the menu  
screen.  
CD  
Changing the Audio Channel  
Press AUDIO repeatedly during playback to hear a  
different audio channel (STER., LEFT, or RIGHT).  
2 To repeat all tracks on a disc, press REPEAT a sec-  
ond time.  
The Repeat icon and “ALL” appears on the menu screen.  
CD  
Repeat Track/Disc/All/Off  
3 To cancel Repeat mode, press REPEAT a third time.  
The Repeat icon and “OFF” appears on the menu screen.  
1.To repeat the track currently playing, press REPEAT.  
The Repeat icon and “TRACK” appear on the menu screen.  
2.To repeat all tracks on a disc, press REPEAT a  
second time.  
The Repeat icon and “DISC” appear on the menu screen.  
3.To repeat entire all disc contents, press REPEAT third  
time.  
The Repeat icon and “All” appears on the menu screen.  
4.To cancel Repeat mode, press REPEAT a fourth time.  
The Repeat icon and “OFF” appear on the menu screen.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with JPEG Disc  
JPEG  
Moving to another File  
Viewing a JPEG disc  
Press SKIP/SCAN . or > once during viewing a  
This DVD Player can play discs with JPEG files and  
Kodak picture CD. Before playing JPEG recordings,  
read the notes on JPEG Recordings on right.  
picture to advance to the next file or to the previous file.  
Still Picture  
1 Press PAUSE/STEP during slide show.  
The player will now go into PAUSE mode.  
2 To return to the slide show, press PLAY or press  
PAUSE/STEP again.  
Insert a disc and close the tray.  
The MP3/WMA-JPEG choice menu appears on the  
TV screen.  
1
MP3 WMA  
JPEG  
To flip the picture  
Press 3/4during showing a picture to flip the  
picture horizontally or a vertically.  
Press 3/4to select the JPEG then press  
2
SELECT/ENTER.  
The JPEG menu appears on the TV screen.  
To rotate picture  
Press 1/2 during showing a picture to rotate the  
picture clockwise or counter clockwise.  
JPEG  
Folder1  
Folder2  
Folder3  
Folder4  
Folder5  
Folder6  
Folder7  
Folder8  
Notes on JPEG Recordings  
Off  
Slide Speed  
Depending upon the size and number of the JPEG  
files, it could take a long time for the DVD player to  
read the disc’s contents. If you don’t see an on-  
screen display after several minutes, some of the files  
are too big — reduce the resolution of the JPEG files  
to less than 2 mega pixels and burn another disc.  
Press 3/4 to select a folder, and SELECT/ENTER.  
A list of files in the folder appears.  
Press RETURN to move to the MP3/WMA-JPEG  
choice menu.  
3
Total number of files and folders on the disc should  
be less than 650.  
Tip  
If you are in a file list and want to return to the Folder  
list, use the 34 buttons on the remote to highlight  
Some disc may be incompatible due to different  
recording format or condition of disc.  
and press SELECT/ENTER to return to the  
previous menu screen.  
When you are using software such as “Easy CD  
Creator” to burn the jpeg files into the CD-R, ensure  
that all the selected files have the “.jpg” extensions  
when copying into the CD layout.  
If you want to view a particular file, press 3/4to  
highlight a file and press SELECT/ENTER or  
PLAY.  
4
If the files have “.jpe” or “.jpeg” extensions, please  
rename them as “.jpg” files.  
Viewing the file proceeding starts.  
During viewing a file, press RETURN to move to  
the previous menu (JPEG menu).  
Press TOP MENU to move to the next page.  
Press MENU to move to the previous page.  
File names without “.jpg” extension will not be able to  
be read by this DVD player. Even though the files are  
shown as JPEG image files in windows explorer.  
Folder1  
JPEG  
Picture1.jpg  
Picture2.jpg  
Picture3.jpg  
Picture4.jpg  
Picture5.jpg  
Picture6.jpg  
Picture7.jpg  
Caution  
If you record a disc using a personal computer, even if it  
is recorded in a compatible format, there are cases in  
which it may not play because of the settings of the  
application software used to create the disc. (Check with  
the software publisher for more detailed information.)  
5/32  
1024X768 Picture5.jpg  
Off  
5/32  
1024X768  
Slide Speed  
Tip  
There are three viewing Slide Speed options: Fast,  
Normal, Slow, and Off. Press 1/2 to highlight the Slide  
Speed then press 3/4 to select the option you want to  
use, and press SELECT/ENTER.  
To stop viewing at any other time, press STOP.  
The JPEG menu appears.  
5
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCD2.0  
VCD1.1  
CD  
MP3  
WMA  
Programmed Playback  
The Program function enables you to store your favorite  
tracks from any disc in the player memory.  
Programmed Playback with MP3/WMA  
disc  
Program can contain 30 tracks.  
Follow step 1 of “Programmed Playback with  
Audio CD ” on left.  
1
Programmed Playback with Audio CD  
Select a track, then press SELECT/ENTER to  
Press PROGRAM during playback or in the stop  
mode to enter the Program Edit mode.  
2
3
place the selected track on the Program list.  
1
E
The  
mark will appear to the right of the word Program  
Repeat step 2 to place additional tracks on the  
Program list.  
on the right side of the menu screen.  
E
Program  
TRACK 8.mp3  
MP3/WMA  
Note  
TRACK 1.mp3  
TRACK 2.mp3  
TRACK 4.mp3  
TRACK 3.mp3  
TRACK 2.mp3  
TRACK 3.mp3  
TRACK 4.mp3  
TRACK 5.mp3  
TRACK 6.mp3  
TRACK 7.mp3  
TRACK 8.mp3  
Press PROGRAM to exit the Program Edit mode.  
E
The  
mark will disappear.  
Clear All  
OFF  
Move to the Disc number selection column by  
2
00:00  
3
2
pressing 3 repeatedly.  
MP3/WMA menu  
3 Select an audio disc number using 1/2.  
Follow steps 6-9 of “Programmed Playback with  
Audio CD ” on left.  
4
Select a track, then press SELECT/ENTER to  
4
place the selected track on the Program list.  
Programmed Playback with Video CD  
Note  
You must select a disc number of audio CD.  
If selected track is other kind of disc (DVD or MP3 etc.),  
the track skips during programmed playback.  
Note  
On a Video CD with PBC, you must set PBC to Off on the  
setup menu to use the Program function. See page 16.  
Repeat steps 2-4 to place additional tracks on  
the Program list.  
Insert Video CD and close the tray.  
5
1
2
Press PROGRAM while playback is stopped.  
The VCD Program menu will appear.  
E
CD  
1
Program  
3
2
4
5
2
2
1
3
TRACK 12  
TRACK 08  
TRACK 10  
TRACK 01  
TRACK 01  
TRACK 02  
TRACK 03  
TRACK 04  
TRACK 05  
TRACK 06  
TRACK 07  
E
VCD  
Program  
3
1
2
4
5
2
2
3
TRACK 04  
TRACK 03  
TRACK 01  
TRACK 01  
TRACK 02  
TRACK 03  
TRACK 04  
TRACK 05  
Clear All  
NORM.  
3
0: 56: 18  
STER.  
Audio CD menu  
Clear All  
NORM.  
3
0: 56: 18  
STER.  
Press 2.  
The programmed track you selected last is highlighted on  
the program list.  
6
7
Video CD menu  
Press 3/4to select the track you want to start  
playing.  
Press TOP MENU to move to the next page.  
Press MENU to move to the previous page.  
Note  
Press RETURN or PROGRAM to exit the Program menu.  
Follow steps 2-8 of “Programmed Playback with  
Audio CD ” on left.  
Press PLAY to start.  
3
Playback begins in the order in which you programmed  
the tracks and “PROG.” appears on the menu screen.  
Playback stops after all of the tracks on the Program list  
have played once.  
8
9
To resume normal playback from  
programmed playback, press PROGRAM.  
“PROG.” indicator disappears in the display window.  
4
To resume normal playback from programmed  
playback, select a track of CD list and then  
press SELECT/ENTER.  
“PROG.” indicator disappears on the menu screen.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCD2.0  
VCD1.1  
CD  
MP3  
WMA  
Programmed Playback  
Repeat Programmed Tracks  
To repeat the track currently playing, press REPEAT.  
The Repeat icon and “TRACK” appears on the menu  
screen.  
To repeat all tracks on the program list, press  
REPEAT a second time.  
The Repeat icon and “ALL” appears on the menu screen.  
To cancel Repeat mode, press REPEAT a third time.  
The Repeat icon and “OFF” appears on the menu screen.  
Erasing a Track from Program List  
1 Press PROGRAM during playback (Audio CD and  
MP3/WMA disc only) or in the stop mode to enter the  
Program Edit mode.  
E
The  
mark will appear.  
2 Press 2 to move to the Program list.  
3 Use 3/4to select the track that you wish to erase  
from the Program list.  
4 Press CLEAR.  
The track will be erased from the Program list.  
Erasing the Complete Program List  
1 Follow steps 1-2 of “Erasing a Track from Program  
List” as above.  
2 Use 3/4to select “Clear All”, then press  
SELECT/ENTER.  
The complete Program for the disc will be erased.  
The programs are also cleared when the disc is removed.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Screen Saver  
Setting Remote control codes of  
DVD player  
The screen saver picture appears when you leave the  
DVD Player in stop mode for about five minutes.  
After the Screen Saver has been engaged for about five  
minutes, the DVD Player will automatically turn itself off.  
• This DVD player support two remote control codes :  
C004 and C044.  
• When the unit is shipped from the factory, the remote  
code is set to C004.  
Video Mode Setting  
To set the code of the player to C044, press PAUSE  
then input “9872” using number buttons.  
VCD2.0  
VCD1.1  
DVD-V  
DVD-A  
With certain discs, the playback picture may be flick-  
ering or Dot Crawl is shown on straight lines. That  
means Vertical interpolation or De-interlace is not  
perfectly matched with the disc. In this case, the  
picture quality may be improved by changing the  
video mode.  
To set the code of the player to C004, press PAUSE  
then input “9871” using number buttons.  
You can change the code of the player only when  
NO DISC appears in the display window.  
• Changed Remote control codes is displayed in the  
Display window.  
To change the video mode, press and hold OSD  
about 3 seconds during disc playback. The new video  
mode number selected is displayed on the TV screen.  
Check whether the video quality has improved. If not,  
repeat the above procedure until picture quality is  
improved.  
• Set the remote control codes of the Remote control to  
the same setting (page 8).  
Notes  
Video mode change sequence:  
MODE1 MODE2 MODE3 MODE1  
This setting can not be used if a disc is playing.  
If a DVD has been loaded, be sure to press STOP  
twice before proceeding.  
If you turn off the power, the video mode will be back  
to initial state (MODE1).  
Detailed Descriptions for Video Modes  
MODE1: The source material of the DVD video (film material  
or video material) is determined from disc information.  
MODE2: Suitable for playing film based content or video based  
material recorded by the progressive scan method.  
MODE3: Suitable for playing video based content with compar-  
atively little motion.  
Note  
The video mode setting only works when the Progressive  
Scan mode is set to “On” in the Setup menu.  
HDCD Playback  
HDCD is a process that increases the fidelity of both  
specially encoded HDCD discs and standard CD audio  
discs. When an HDCD-encoded disc is playing, the spe-  
cial decoder is automatically activated and the HDCD  
Indicator lights. No user intervention is required.  
To enjoy the benefits of HDCD, your DVD Player must  
be connected to your A/V receiver via the Analog Audio  
Outputs. However, if your A/V receiver or surround  
processor is equipped with built-in HDCD decoding, you  
may also use a Coaxial or Optical digital audio connec-  
tion so that the HDCD processing is done there.  
(see “Sound”, page 16)  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Check the following guide for the possible cause of a problem before contacting service.  
Cause  
Correction  
Symptom  
No power.  
The power cord is disconnected.  
Plug the power cord into the wall outlet  
securely.  
No disc is inserted.  
Insert a disc. (Check that the DVD or,  
audio CD indicator in the display  
window is lit.)  
The power is on, but  
the DVD player does  
not work.  
The TV is not set to receive DVD signal Select the appropriate video input mode  
No picture.  
output.  
on the TV so the picture from the DVD  
player appears on the TV screen.  
The video cable is not connected  
Connect the video cable securely.  
securely.  
The connected TV power is turned off.  
Turn on the TV.  
No sound.  
The equipment connected with the  
audio cable is not set to receive DVD  
signal output.  
Select the correct input mode of the  
audio receiver so you can listen to the  
sound from the DVD player.  
The audio cables are not connected  
Connect the audio cable securely.  
securely.  
The power of the equipment connected  
with the audio cable is turned off.  
Turn on the equipment connected with  
the audio cable.  
The Digital Audio Output is set to the  
wrong position.  
Set the Digital Audio Output to the  
correct position, then turn on the DVD  
player again by pressing POWER.  
The playback picture is The disc is dirty.  
Clean the disc.  
poor.  
No disc is inserted.  
Insert a disc. (Check that the DVD, or  
audio CD indicator in the DVD display is  
lit.)  
The DVD player does  
not start playback.  
An unplayable disc is inserted.  
Insert a playable disc. (Check the disc  
type, color system, and Regional code.)  
The disc is placed upside down.  
The disc is not placed within the guide.  
Place the disc with the playback side  
down.  
Place the disc on the disc tray correctly  
inside the guide.  
The disc is dirty.  
Clean the disc.  
The Rating level is set.  
Cancel the Rating function or change  
the rating level.  
The remote control  
does not work properly.  
The remote control is not pointed at the  
remote sensor of the DVD player.  
Point the remote control at the remote  
sensor of the DVD player.  
The remote control is too far from the  
DVD player.  
Operate the remote control within 16 ft  
(5 m).  
There is an obstacle in the path of the  
Remove the obstacle.  
remote control and the DVD player.  
The batteries in the remote control are  
Replace the batteries with new ones.  
exhausted.  
Set the remote control codes of both  
DVD player and Remote control to the  
same setting.  
Remote control code is different  
between the DVD player and Remote  
control.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Speaker Settings  
Make the following settings for the built-in 5.1 channel  
surround decoder.  
Distance  
If you connected speakers to your DVD Player, setting  
the Distance lets the speakers know how far the sound  
has to travel to reach your set listening point. This  
allows the sound from each speaker to reach the listen-  
er at the same time. (1 ft = 30.48 cm)  
Disc Audio  
Disc Subtitle  
R
R
Disc Menu  
Rating  
Front L  
Volume  
Size  
Country Code  
0 dB  
Large  
1 ft  
TV Aspect  
Test  
Menu Language  
Distance  
Test  
Progressive Scan  
Digital Audio Output  
5.1 Speaker Setup  
Others  
Press SELECT/ENTER to test the signals of each  
speaker. Adjust the volume to match the volume of test  
signals memorized in the system.  
Return  
Front Left (L) Center Front Right (R)  
Rear Right (R) Rear Left (L)  
Select “5.1 Speaker Setup” using the 3/4but-  
tons on the setup menu.  
Return  
1
Press SELECT/ENTER to return to the previous menu.  
While “5.1 Speaker Setup” is selected, press 2  
2
3
button.  
Press 1/ 2buttons to select the desired speak-  
er.  
4 Adjust options by using 1/2/3/4buttons.  
Speaker selection  
Select a speaker that you want to adjust. (Front speak-  
ers (Left), Front speakers (Right), Center Speaker, Rear  
speakers (Left), Rear speakers (Right), or Subwoofer)  
Volume  
Press 1/ 2to adjust the output level of the selected  
speaker. (-10dB - 0dB)  
Size  
Press 1/ 2to set a mode. (Large, Small or None)  
If you have connected the system to a speaker with  
a low frequency of 100Hz or below, select “Large.”  
If you have connected the system to a speaker with-  
out a low frequency of 100Hz or below, select  
“Small.” If you have not connected a subwoofer,  
always select “Large” for Front speaker (L/R).  
When you do not have a certain speaker connected,  
select “None.”  
Front L/R speaker’s size can be set to “Large” or  
“Small.”  
If Front L/R speaker’s size is set to “Small,” Rear and  
Center speaker’s size can be set to “Small” or  
“None.”  
Subwoofer’s size can be set only to “Large” or  
“None”.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language Code List  
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”  
(See page 15).  
Code Language  
Code Language  
Code Language  
Code Language  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
Abkhazian  
Afar  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Fiji  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
8277  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
Lingala  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Singhalese  
Slovak  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Finnish  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Afrikaans  
Albanian  
Ameharic  
Arabic  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Malayalam  
Maltese  
Armenian  
Assamese  
Aymara  
Maori  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Marathi  
Azerbaijani  
Bashkir  
Moldavian  
Mongolian  
Nauru  
Tamil  
Basque  
Tatar  
Bengali; Bangla  
Bhutani  
Hebrew  
Hindi  
Nepali  
Telugu  
Thai  
Norwegian  
Oriya  
Bihari  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Tibetan  
Tigrinya  
Tonga  
Breton  
Panjabi  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Pashto, Pushto  
Persian  
Turkish  
Turkmen  
Twi  
Polish  
Italian  
Portuguese  
Quechua  
Rhaeto-Romance  
Rumanian  
Russian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
Ukrainian  
Urdu  
Chinese  
Corsican  
Croatian  
Czech  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Samoan  
Sanskrit  
Danish  
Dutch  
Korean  
Scots Gaelic  
Serbian  
Wolof  
English  
Kurdish  
Laothian  
Latin  
Xhosa  
Esperanto  
Estonian  
Faroese  
Serbo-Croatian  
Shona  
Yiddish  
Yoruba  
Zulu  
Latvian, Lettish  
Sindhi  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Country Code List  
Enter the appropriate code number for the initial setting “Country Code” (See page 17).  
Code Country  
Code Country  
Code Country  
Code Country  
AD  
AE  
AF  
AG  
AI  
Andorra  
ER  
ES  
ET  
FI  
Eritrea  
Spain  
Ethiopia  
Finland  
LC  
LI  
LK  
LR  
LS  
LT  
LU  
LV  
Saint Lucia  
Liechtenstein  
Sri Lanka  
Liberia  
Lesotho  
Lithuania  
Luxembourg  
Latvia  
Libya  
Morocco  
Monaco  
SC  
SD  
SE  
SG  
SH  
SI  
Seychelles  
Sudan  
Sweden  
Singapore  
Saint Helena  
Slovenia  
Svalbard and Jan Mayen  
Islands  
Slovak Republic  
Sierra Leone  
San Marino  
Senegal  
Somalia  
Suriname  
Saint Tome and Principe  
Former USSR  
El Salvador  
Syria  
Swaziland  
Turks and Caicos Islands  
Chad  
French Southern  
Territories  
Togo  
Thailand  
Tadjikistan  
Tokelau  
Turkmenistan  
Tunisia  
Tonga  
East Timor  
Turkey  
Trinidad and Tobago  
Tuvalu  
Taiwan  
Tanzania  
United Arab Emirates  
Afghanistan  
Antigua and Barbuda  
Anguilla  
Albania  
Armenia  
Netherlands Antilles  
Angola  
Antarctica  
Argentina  
American Samoa  
Austria  
Australia  
FJ  
Fiji  
AL  
FK  
FM  
FO  
FR  
FX  
Falkland Islands  
Micronesia  
Faroe Islands  
France  
France (European  
Territory)  
Gabon  
Great Britain  
Grenada  
Georgia  
French Guyana  
Ghana  
Gibraltar  
Greenland  
Gambia  
AM  
AN  
AO  
AQ  
AR  
AS  
AT  
AU  
AW  
AZ  
BA  
BB  
BD  
BE  
BF  
BG  
BH  
BI  
SJ  
LY  
SK  
SL  
SM  
SN  
SO  
SR  
ST  
SU  
SV  
SY  
SZ  
TC  
TD  
TF  
MA  
MC  
MD  
MG  
MH  
MK  
ML  
MM  
MN  
MO  
MP  
MQ  
MR  
MS  
MT  
MU  
MV  
GA  
GB  
GD  
GE  
GF  
GH  
GI  
GL  
GM  
GN  
GP  
GQ  
GR  
GS  
Moldavia  
Madagascar  
Marshall Islands  
Macedonia  
Mali  
Myanmar  
Mongolia  
Aruba  
Azerbaidjan  
Bosnia-Herzegovina  
Barbados  
Bangladesh  
Belgium  
Burkina Faso  
Bulgaria  
Bahrain  
Burundi  
Benin  
Bermuda  
Brunei Darussalam  
Bolivia  
Brazil  
Bahamas  
Bhutan  
Bouvet Island  
Botswana  
Belarus  
Belize  
Canada  
Cocos (Keeling) Islands  
Central African Republic  
Congo  
Switzerland  
Ivory Coast  
Cook Islands  
Chile  
Cameroon  
China  
Colombia  
Costa Rica  
Former Czechoslovakia  
Cuba  
Cape Verde  
Christmas Island  
Cyprus  
Czech Republic  
Germany  
Djibouti  
Denmark  
Dominica  
Dominican Republic  
Algeria  
Ecuador  
Estonia  
Egypt  
Western Sahara  
Macau  
Northern Mariana Islands  
Martinique (French)  
Mauritania  
Montserrat  
Malta  
Guinea  
Guadeloupe (French)  
Equatorial Guinea  
Greece  
S. Georgia & S. Sandwich  
Isls.  
Guatemala  
Guam (USA)  
Guinea Bissau  
Guyana  
Hong Kong  
Heard and McDonald  
Islands  
Honduras  
Croatia  
Haiti  
Hungary  
Indonesia  
Ireland  
Israel  
India  
British Indian Ocean  
Territory  
Iraq  
Iran  
Iceland  
Italy  
Jamaica  
TG  
TH  
TJ  
TK  
TM  
TN  
TO  
TP  
TR  
TT  
TV  
TW  
TZ  
UA  
UG  
UK  
UM  
BJ  
Mauritius  
Maldives  
BM  
BN  
BO  
BR  
BS  
BT  
BV  
BW  
BY  
BZ  
CA  
CC  
CF  
CG  
CH  
CI  
CK  
CL  
CM  
CN  
CO  
CR  
CS  
CU  
CV  
CX  
CY  
CZ  
DE  
DJ  
GT  
GU  
GW  
GY  
HK  
HM  
MW Malawi  
MX  
MY  
MZ  
NA  
NC  
NE  
NF  
NG  
NI  
NL  
NO  
NP  
NR  
NU  
NZ  
OM  
PA  
PE  
PF  
PG  
PH  
PK  
PL  
PM  
PN  
PR  
PT  
PW  
PY  
QA  
RE  
RO  
RU  
RW  
SA  
SB  
Mexico  
Malaysia  
Mozambique  
Namibia  
New Caledonia (French)  
Niger  
Norfolk Island  
Nigeria  
Nicaragua  
Netherlands  
Norway  
Nepal  
Nauru  
Niue  
New Zealand  
Oman  
Panama  
Peru  
Polynesia (French)  
Papua New Guinea  
Philippines  
Pakistan  
HN  
HR  
HT  
HU  
ID  
IE  
IL  
IN  
IO  
Ukraine  
Uganda  
United Kingdom  
USA Minor Outlying  
Islands  
United States  
Uruguay  
Uzbekistan  
Vatican City State  
Saint Vincent &  
Grenadines  
Venezuela  
Virgin Islands (British)  
Virgin Islands (USA)  
Vietnam  
Vanuatu  
Wallis and Futuna Islands  
Samoa  
Yemen  
Mayotte  
Yugoslavia  
South Africa  
Zambia  
Zaire  
Zimbabwe  
US  
UY  
UZ  
VA  
VC  
IQ  
IR  
IS  
IT  
JM  
JO  
JP  
KE  
KG  
KH  
KI  
KM  
KN  
KP  
KR  
KW  
KY  
KZ  
LA  
LB  
VE  
VG  
VI  
Jordan  
Japan  
Kenya  
Poland  
Saint Pierre and Miquelon  
Pitcairn Island  
Puerto Rico  
Portugal  
Palau  
Paraguay  
Qatar  
Reunion (French)  
Romania  
Russian Federation  
Rwanda  
Saudi Arabia  
Solomon Islands  
VN  
VU  
WF  
WS  
YE  
YT  
YU  
ZA  
ZM  
ZR  
ZW  
Kyrgyzstan  
Cambodia6  
Kiribati  
Comoros  
Saint Kitts & Nevis Anguilla  
North Korea  
South Korea  
Kuwait  
DK  
DM  
DO  
DZ  
EC  
EE  
EG  
EH  
Cayman Islands  
Kazakhstan  
Laos  
Lebanon  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
Power requirements  
Power consumption  
Dimensions (approx.)  
Mass (approx.)  
AC 120V , 60 Hz  
14W  
17.3 X 3.2 X 16.2 inches (440 X 80 X 410 mm) (w x h x d)  
11.2 lbs (5.1 kg)  
Operating temperature  
Operating humidity  
5˚C to 35˚C (41˚F to 95˚F)  
5 % to 90 %  
System  
Laser  
Semiconductor laser, wavelength 650 nm  
NTSC  
Signal system  
Frequency response  
DVD (DVD Audio 192 kHz): 8 Hz to 88 kHz  
DVD (PCM 96 kHz): 8 Hz to 44 kHz  
DVD (PCM 48 kHz): 8 Hz to 22 kHz  
CD: 8 Hz to 20 kHz  
Signal-to-noise ratio  
Harmonic distortion  
Dynamic range  
More than 100dB (ANALOG OUT connectors only)  
Less than 0.008%  
More than 100 dB (DVD)  
More than 95 dB (CD)  
Outputs  
Video output  
S-Video output  
1 Vp-p 75 , negative sync, RCA jack x 1  
(Y) 1.0 V (p-p), 75 , negative sync, Mini DIN 4-pin x 1  
(C) 0.3 V (p-p) 75 Ω  
Component Video output  
(Y) 1.0 V (p-p), 75 , negative sync, RCA jack x 1  
(CB/PB)/(CR/PR) 0.7 V (p-p), 75 , RCA jack x 2  
Audio output (coaxial)  
0.5 V (p-p), 75 , RCA jack x 1  
Optical connector x 1  
Audio output (optical)  
Audio output (analog 2ch)  
Audio output (analog 5.1ch)  
2.0 Vrms , 600 , RCA jack (L, R) x 1  
2.0 Vrms , 600 , RCA jack x 6  
Accessories  
Video cable . . . . . . . . . . . . . . . . . . . . . . .1  
Audio cable . . . . . . . . . . . . . . . . . . . . . . .1  
Remote cable . . . . . . . . . . . . . . . . . . . . .1  
Remote control unit (RC5400VC) . . . . . . .1  
Batteries (AAA size) . . . . . . . . . . . . . . . . .2  
Warranty card (for USA) . . . . . . . . . . . . .1  
Warranty card (for CANADA) . . . . . . . . . .1  
User Guide . . . . . . . . . . . . . . . . . . . . . . .1  
Design and specifications are subject to change without notice.  
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, “MLP Lossless”, and the double-D symbol are trade-  
marks of Dolby Laboratories.  
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You can find your nearest authorized distributor or dealer on our website.  
JAPAN  
U.S.A.  
Marantz Japan, Inc.  
Marantz America, Inc.  
Marantz Europe B.V.  
35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan  
1100 Maplewood Drive, Itasca, IL 60143, U.S.A.  
EUROPE  
P.O. Box 8744, 5605 LS Eindhoven, The Netherlands  
is a registered trademark.  
P/NO: 3834RS0062R  
Printed in China  
03/2003 MIT-lg 31AW851250  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Land Pride Lawn Mower FDR16 Series User Manual
Link electronic Network Router 861 XL818G User Manual
Linksys Switch PS2KVM2 User Manual
Linn Stereo Amplifier Klout User Manual
Master Bilt Refrigerator 48 User Manual
Maxtor Computer Drive 10K IV User Manual
Maytag Microwave Oven MMV5208WS User Manual
McCulloch Brush Cutter 248530 User Manual
Mellerware Hot Beverage Maker 22400 User Manual
Microtek Flat Panel Television MHP1 HD User Manual