Marantz DVD Player VC4400 User Manual

Model VC4400 User Guide

5 Disc DVD Changer

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL.

AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

This product has been designed and manufactured to assure personal safety. Improper use can result in electric

shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following proce-

dures for installation, use, and servicing.

This product does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

1. Read these instructions. - All these safety and oper-

ating instructions should be read before the product is

operated.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the product.

2. Keep these instructions. - The safety, operating and

use instructions should be retained for future refer-

ence.

11. Only use attachments/accessories specified by

the manufacturer.

3. Heed all warnings. - All warnings on the product and

in the operating instructions should be adhered to.

4. Follow all instructions. - All operating and use

instructions should be followed.

5. Do not use this product near water. – For example:

near a bath tub, wash bowl, kitchen sink, laundry tub,

in a wet basement; or near a swimming pool; and

other areas located near water.

12. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

apparatus. When a cart is used, use caution

when moving the cart/product combination to

avoid injury from tip-over.

6. Clean only with dry cloth. – Unplug this product from

the wall outlet before cleaning. Do not use liquid

cleaners.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions. -

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over-heating. The open-

ings should never be blocked by placing the product

on a bed, sofa, rug or other similar surface. This prod-

uct should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is pro-

vided or the manufacturer’s instructions have been

adhered to.

13. Unplug this product during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the product has been

damaged in any way, such as power-supply cord

or plug is damaged, liquid has been spilled or

objects have fallen into the product, the product

has been exposed to rain or moisture, does not

operate normally, or has been dropped.

8. Do not install near any heat sources such as radi-

ators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A ground-

ing type plug has two blades and a third ground-

ing prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Operation with Audio CD and MP3/WMA Disc . . 20-21

Playing an Audio CD and MP3/WMA Disc . . . . . 20

Notes on MP3/WMA Recordings . . . . . . . . . . . . 20

ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

ꢀ Moving to another Track . . . . . . . . . . . . . . . 21

ꢀ Repeat Track/ All/ Off. . . . . . . . . . . . . . . . . . 21

ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 21

ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 21

ꢀ Changing the Audio Channel . . . . . . . . . . . . 21

ꢀ Repeat Track/Disc/All/Off . . . . . . . . . . . . . . . 21

Operation with JPEG Disc. . . . . . . . . . . . . . . . . . . 22

Viewing a JPEG disc . . . . . . . . . . . . . . . . . . . . . 22

ꢀ Moving to another File . . . . . . . . . . . . . . . . . 22

ꢀ Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . 22

ꢀ To flip the picture . . . . . . . . . . . . . . . . . . . . . 22

ꢀ To rotate picture. . . . . . . . . . . . . . . . . . . . . . 22

ꢀ Notes on JPEG Recordings . . . . . . . . . . . . . 22

Programmed Playback . . . . . . . . . . . . . . . . . . . 23-24

Programmed Playback with Audio CD . . . . . . . . 23

Programmed Playback with MP3/WMA disc . . . . 23

Programmed Playback with Video CD . . . . . . . . 23

ꢀ Repeat Programmed Tracks . . . . . . . . . . . . 24

ꢀ Erasing a Track from Program List. . . . . . . . 24

ꢀ Erasing the Complete Program List . . . . . . . 24

Additional Information . . . . . . . . . . . . . . . . . . . . . 25

Screen Saver. . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 25

Setting Remote control codes of DVD player . . . 25

Introduction

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 6

About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Front Panel and Display Window . . . . . . . . . . . . . . 7

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Preparation

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11

Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . 10

Connecting to Optional Equipment . . . . . . . . . . . 11

Before Operation . . . . . . . . . . . . . . . . . . . . . . . 12-15

General Explanation. . . . . . . . . . . . . . . . . . . . . . 12

On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 12

Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 13-15

ꢀ Initial Settings General Operation. . . . . . . . . 13

ꢀ Language . . . . . . . . . . . . . . . . . . . . . . . . . . 13

ꢀ Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

ꢀ Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

ꢀ Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

ꢀ Parental Control. . . . . . . . . . . . . . . . . . . . . . 15

Operation

Operation with DVD and Video CD . . . . . . . . . 16-19

Playing a DVD and Video CD. . . . . . . . . . . . . . . 16

ꢀ Exchanging discs during playback . . . . . . . . 16

ꢀ Skipping discs . . . . . . . . . . . . . . . . . . . . . . . 16

ꢀ Exchanging the disc and starting playback. . 16

General Features. . . . . . . . . . . . . . . . . . . . . . . . 17

ꢀ Moving to another TITLE . . . . . . . . . . . . . . 17

ꢀ Moving to another CHAPTER/TRACK . . . . . 17

ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

ꢀ Still Picture and Frame-by-Frame Playback . 17

ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 17

ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 18

ꢀ Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

ꢀ Time Search . . . . . . . . . . . . . . . . . . . . . . . . 18

ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 18

ꢀ Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

ꢀ Marker Search. . . . . . . . . . . . . . . . . . . . . . . 19

Special DVD Features . . . . . . . . . . . . . . . . . . . . 19

ꢀ Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 19

ꢀ Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 19

ꢀ Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 19

ꢀ Changing the Audio Language. . . . . . . . . . . 19

ꢀ Changing the Audio Channel . . . . . . . . . . . . 19

ꢀ Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Reference

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Language Code List . . . . . . . . . . . . . . . . . . . . . . . 27

Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . 28

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

About the symbols for instructions

Indicates hazards likely to cause harm to the unit

itself or other material damage.

Indicates special operating features of this unit.

Indicates tips and hints for making the task easier.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use

Disc-related terms

Playable Discs

Title (DVD only)

DVD

The main film content or accompanying feature content

or additional feature content, or music album.

Each title is assigned a title reference number enabling

you to locate it easily.

(8 cm / 12 cm disc)

Video CD (VCD)

(8 cm / 12 cm disc)

Chapter (DVD only)

Audio CD

Sections of a picture or a musical piece that are smaller

than titles. A title is composed of one or several chap-

ters. Each chapter is assigned a chapter number,

enabling you to locate the chapter you want. Depending

on the disc, chapters may not be recorded.

(8 cm / 12 cm disc)

In addition, this unit can play a DVD-R, DVD RW,

Kodak PICTURE CD, SVCD, and CD-R or CD-RW that

contains audio titles, MP3, WMA or JPEG files.

Notes

Track (Video CD and audio CD only)

– Depending on the conditions of the recording equip-

ment or the CD-R/RW (or DVD-R/ RW) disc itself,

some CD-R/RW (or DVD-R/ RW) discs cannot be

played on the unit.

Sections of a picture or a musical piece on a video CD

or an audio CD. Each track is assigned a track number,

enabling you to locate the track you want.

– Do not attach any seal or label to either side (the

labeled side or the recorded side) of a disc.

Scene

On a video CD with PBC (Playback control) functions,

moving pictures and still pictures are divided into sec-

tions called “Scenes”. Each scene is displayed in the

menu screen and assigned a scene number, enabling

you to locate the scene you want.

–

Do not use irregularly shaped CDs (e.g., heart-shaped

or octagonal). It may result in malfunctions.

Notes on DVDs and Video CDs

A scene is composed of one or several tracks.

Some playback operations of DVDs and Video CDs

may be intentionally fixed by software manufacturers.

As this unit plays DVDs and Video CDs according to

disc content designed by the software manufacturer,

some playback features of the unit may not be available

or other functions may be added.

Refer also to the instructions supplied with the DVDs

and Video CDs. Some DVDs made for business pur-

poses may not be played on the unit.

Types of video CDs

There are two types of video CDs:

Video CDs equipped with PBC (Version 2.0)

PBC (Playback control) functions allow you to interact

with the system via menus, search functions, or other

typical computer-like operations. Moreover, still pictures

of high resolution can be played if they are included in

the disc.

Regional code of the DVD player and DVDs

This DVD player is designed and manufactured

Video CDs not equipped with PBC (Version 1.1)

Operated in the same way as audio CDs, these discs

allow playback of video pictures as well as sound, but

they are not equipped with PBC.

for playback of region “1” encoded DVD soft-

ware. The region code on the labels of some

DVD discs indicates which type of player can play those

discs. This unit can play only DVD discs labeled “1” or

“ALL”. If you try to play any other discs, the message

“Check Regional Code” will appear on the TV screen.

Some DVD discs may not have a region code label even

though their playback is prohibited by area limits.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use (Continued)

Precautions

Notes on Discs

Handling discs

Handling the unit

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not

get on the surface.

When shipping the unit

The original shipping carton and packing materials

come in handy. For maximum protection, re-pack the

unit as it was originally packed at the factory.

Do not stick paper or tape on the disc.

When setting up the unit

The picture and sound of a nearby TV, VCR, or radio

may be distorted during playback. In this case, position

the unit away from the TV, VCR, or radio, or turn off the

unit after removing the disc.

Storing discs

To keep the exterior surfaces clean

After playing, store the disc in its case.

Do not expose the disc to direct sunlight or sources of

heat, or leave it in a parked car exposed to direct sun-

light, as there may be a considerable temperature

increase inside the car.

Do not use volatile liquids, such as insecticide spray,

near the unit. Do not leave rubber or plastic products in

contact with the unit for a long period of time. They will

leave marks on the surface.

Cleaning the unit

Cleaning discs

To clean the cabinet

Fingerprints and dust on the disc can cause poor pic-

ture quality and sound distortion. Before playing, clean

the disc with a clean cloth. Wipe the disc from the cen-

ter out.

Use a soft, dry cloth. If the surfaces are extremely dirty,

use a soft cloth lightly moistened with a mild detergent

solution. Do not use strong solvents such as alcohol,

benzine, or thinner, as these might damage the surface

of the unit.

To obtain a clear picture

The DVD player is a high-tech, precision device. If the

optical pick-up lens and disc drive parts are dirty or

worn, the picture quality will be poor.

Regular inspection and maintenance are recommended

after every 1,000 hours of use. (This depends on the

operating environment.)

Do not use strong solvents such as alcohol, benzine,

thinner, commercially available cleaners, or anti-static

spray intended for older vinyl records.

About Symbols

For details, please contact your nearest dealer.

About the

symbol display

Remote Control Operation Range

“

” may appear on the TV screen during operation.

Point the remote control at the remote sensor and

press the buttons.

^ꢀDistance: About 16 ft (5 m) from the front of the

remote sensor.

^ꢀAngle: About 30° in each direction of the front of the

remote sensor.

This icon means the function explained in this owner’s

manual is not available on that specific DVD video disc.

About the disc symbols for instructions

A section whose title has one of the following symbol is

applicable only to the disc represented by the symbol.

Remote control battery installation

DVD DVD

VCD2.0

VCD1.1

Video CDs with the PBC (playback control)

function.

Detach the battery cover on the rear of

the remote control, and insert two R03

Video CDs without the PBC (playback control)

function.

(size AAA) batteries with

aligned correctly.

and

Audio CDs.

Caution

MP3 MP3 discs.

Do not mix old and new batteries. Never mix different

types of batteries (standard, alkaline, etc.).

WMA discs.

JPEG discs.

WMA

JPEG

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel and Display Window

STANDBY

Lights red when the

DVD player is standby.

Disc Tray

Insert a disc here.

Display window

Shows the current

status of the player.

OPEN/CLOSE (

)

Opens or closes the

disc tray.

DISC SKIP

Moves to the next

Remote Sensor

POWER

available disc tray.

ON/STANDBY

Switches the

player ON and

STANDBY.

Reverse Skip/Scan (

)

Go to beginning of current

chapter/track or to PREVIOUS

chapter/track.

Press and hold for two seconds for a

fast reverse search.

Forward Skip/Scan (

)

Go to NEXT chapter/track.

Press and hold for two seconds for

a fast forward search.

PLAY ( 2)

Starts playback.

DISC EX-CHANGE

Changes a disc (other than the

one playing) during playback

STOP ( 9)

Stops playback.

PAUSE ( ; )

Pause playback temporarily/ press repeatedly

for frame-by-frame playback.

ANGLE Lights when multi angles are

present.

A light will appear if a disc is in the

disc tray. The current disc tray flashes.

TITLE Indicates current title number

DVD

DVD inserted

CHP/TRK Indicates current chapter or track number

Indicates total playing time/elapsed time

PROG. Programmed playback active

CD Audio CD inserted

VCD Video CD inserted

MP3 MP3 or WMA disc inserted

RANDOM RANDOM

playback active

Indicates current player function:

Playback, Pause, etc.

Indicates repeat

mode

MP3 VCD

CD DVD

TITLE

CHP/TRK

PROG.

RANDOM ALL

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

MARKER •

OPEN/CLOSE

Marks any point during playback.

Opens and closes the disc tray.

SEARCH •

ANGLE

Displays MARKER SEARCH menu.

Selects a DVD camera angle if

available

POWER

Switches DVD Player ON and OFF.

RANDOM

Plays tracks in random order.

AUDIO

Selects an audio language (DVD) or

an audio channel (CD).

PROGRAM

Enters to the program edit mode or

exits from that.

SUBTITLE

Selects a subtitle language.

CLEAR

Removes a track number on the

program list or a mark on the

MARKER SEARCH menu.

0-9 number buttons

Selects numbered items in a menu.

Reverse SKIP/SCAN ( S ) •

Search backward*/ go to beginning

of current chapter or track or go to

previous chapter or track.

• ZOOM

Enlarges video image.

• STOP ( 9)

Stops playback.

* Press and hold button for about

two seconds.

• PAUSE/STEP ( ;)

Pauses playback temporarily/ press

repeatedly for frame-by-frame

playback.

PLAY ( 2) •

Starts playback.

Forward SKIP/SCAN ( T ) •

Search forward*/ go to next chap-

ter or track.

SELECT/ENTER

Acknowledges menu selection.

SLOW ( , / . )

Reverse/ Forward slow playback.

OSD

Accesses On-Screen display.

1/2/3/4 (left/right/up/down)

- Selects an item in the menu.

Accesses menu on a DVD disc.

• REPEAT

Repeat chapter, track, title all.

TOP MENU •

Displays the discs Top menu, if

available.

• A-B

Repeat sequence.

SETUP •

Accesses or removes setup menu.

• DISC SKIP

Moves to the next available disc tray.

RETURN •

- Removes the setup menu.

- Displays the menu of a video

CD with PBC.

Setting Remote control codes of Remote control

• This remote control supports two remote control codes: C004 and C044.

• When the unit is shipped from the factory, the remote control is set to C004.

• To set the remote control to C044, hold down both the STOP button and "2" number button on the remote control

for at least five seconds.

• You can change the code of remote control only when NO DISC appears in the display window.

• To set the remote control back to C004, hold down both the STOP button and "1" number button on the

remote control for at least five seconds.

• Also set the remote control codes of the player to the same setting as the remote control.

(This setting is set to C004, when the unit is shipped from the factory.) (page 25)

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel

OPTICAL (Digital audio out jack)

Connect to digital (optical) audio equipment.

COAXIAL (Digital audio out jack)

Connect to digital (coaxial) audio equipment.

COMPONENT VIDEO OUT (Y, CB/PB, CR/PR)

Connect to a TV with Y, CB/PB, CR/PR inputs.

AUDIO OUT1 (Left/Right)

Connect to an amplifier, receiver,

or stereo system.

VIDEO OUT

Connect to a TV with video inputs.

AUDIO OUT2 (Left/Right)

Connect to an amplifier, receiver,

or stereo system.

S-VIDEO OUT

Connect to a TV with S-Video inputs.

AC Power Cord

Plug into the power source.

Caution

Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent

damage to the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Progressive Scan (Color Stream pro) connection

Tips

^ꢀIf your television is a high-definition or “digital ready”

television, you may take advantage of the DVD

Player’s progressive scan output for the highest

video resolution possible.

^ꢀDepending on your TV and other equipment you wish

to connect, there are various ways you could connect

the player. Use only one of the connections

described below.

^ꢀIf your TV does not accept the Progressive Scan for-

mat, the picture will appear scrambled if you try

Progressive Scan on the DVD Player.

^ꢀPlease refer to the manuals of your TV, VCR, Stereo

System or other devices as necessary to make the

best connections.

^ꢀFor better sound reproduction, connect the player’s

AUDIO OUT jacks to the audio in jacks of your

amplifier, receiver, stereo or audio/video equipment.

See “Connecting to Optional Equipment”

on page 11.

Connect the COMPONENT VIDEO OUT jacks on

the DVD Player to the corresponding in jacks on

the TV using an optional Y, CB/PB, CR/PR cable (C).

Connect the Left and Right AUDIO OUT jacks of

the DVD Player to the audio left/right in jacks on the

TV (A) using the supplied audio cables.

Caution

–

Make sure the DVD Player is connected directly to the

TV. Tune the TV to the correct video input channel.

– Do not connect the DVD Player’s AUDIO OUT jack to

the phono in jack (record deck) of your audio system.

– Do not connect your DVD Player via your VCR. The

DVD image could be distorted by the copy protection

system.

Notes

– Set the Progressive to “On” on the setup menu for

progressive signal, see page 13.

– Progressive scan does not work with the analog video

connections (yellow VIDEO OUT and S-VIDEO OUT

jack). (See “Video mode setting”, page 25)

Connecting to a TV

^ꢀMake one of the following connections, depending on

the capabilities of your existing equipment.

Rear of TV

S-VIDEO

INPUT

COMPONENT VIDEO /

PROGRESSIVE SCAN INPUT

VIDEO

INPUT

AUDIO INPUT

Video connection

Connect the VIDEO OUT jack on the DVD Player to

the video in jack on the TV using the video cable (V).

Connect the Left and Right AUDIO OUT jacks of

the DVD Player to the audio left/right in jacks on the

TV (A) using the audio cables.

S-Video connection

Connect the S-VIDEO OUT jack on the DVD Player

to the S-Video in jack on the TV using the S-Video

cable (S).

Connect the Left and Right AUDIO OUT jacks of

the DVD Player to the audio left/right in jacks on the

TV (A) using the audio cables.

Component Video (Color Stream ) connection

Connect the COMPONENT VIDEO OUT jacks on

the DVD Player to the corresponding in jacks on

the TV using an Y, CB/PB, CR/PR cable (C).

Connect the Left and Right AUDIO OUT jacks of

the DVD Player to the audio left/right in jacks on the

TV (A) using the audio cables.

Rear of DVD player

Notes

– Refer to the owner’s manual of your TV as well.

– Before you connect the DVD player to your TV, be

sure to turn off the power and unplug both units from

the wall outlet before making any connections.

Caution

–

Do not set the Digital Audio Output of this DVD player to

“Dolby Digital” unless you are connecting the DIGITAL

OUT jack of this DVD player to an AV decoder that has

the Dolby Digital decoding function. High volume sound

may damage your hearing as well as the speakers.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Continued)

Connecting to Optional Equipment

Rear of DVD player

Connecting to an amplifier equipped with two

channel analog stereo or Dolby Pro Logic ll/

Pro Logic

Connect the Left and Right AUDIO OUT jacks on the

DVD Player to the audio left and right in jacks on your

amplifier, receiver, or stereo system, using the audio

cables (A).

Connecting to an amplifier equipped with two

channel digital stereo (PCM) or to an Audio/

Video receiver equipped with a multi-channel

decoder (Dolby Digital™, MPEG 2, or DTS)

Connect one of the DVD Player’s DIGITAL AUDIO

OUT jacks (OPTICAL O or COAXIAL X) to the cor-

responding in jack on your amplifier. Use an option-

al digital (optical O or coaxial X) audio cable.

OPTICAL

COAXIAL

DIGITAL INPUT

AUDIO INPUT

You will need to activate the player’s digital output.

(See “Digital Audio Output” on page 14).

Amplifier (Receiver)

Digital Multi-channel sound

A digital multi-channel connection provides the best

sound quality. For this you need a multi-channel

Audio/Video receiver that supports one or more of the

audio formats supported by your DVD Player (MPEG 2,

Dolby Digital and DTS). Check the receiver manual and

the logos on the front of the receiver.

Notes

– Refer to the owner’s manual of your audio system as

well.

– Before you connect the DVD player to other equip-

ment, be sure to turn off the power and unplug all of

the equipment from the wall outlet before making any

connections.

– If you place the DVD player near a tuner or radio, the

radio broadcast sound might be distorted. In this

case, move the DVD player away from the tuner and

radio.

– The output sound of the DVD player has a wide

dynamic range. Be sure to adjust the receiver’s vol-

ume to a moderate listening level. Otherwise, the

speakers may be damaged by a sudden high volume

sound.

Caution:

Due to the DTS Licensing agreement, the digital output

will be in DTS digital out when DTS audio stream is

selected.

Notes

–

If the audio format of the digital output does not match

the capabilities of your receiver, the receiver will

produce a strong, distorted sound or no sound at all.

– Six Channel Digital Surround Sound via digital con-

nection can only be obtained if your receiver is

equipped with a Digital Multi-channel decoder.

– To see the audio format of the current DVD in the on-

screen display, press AUDIO.

– Turn off the receiver before you connect or disconnect

the DVD player’s power cord. If you leave the receiv-

er power on, the speakers may be damaged.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation

Temporary Feedback Field Icons

General Explanation

This manual gives basic instructions for operating the

DVD Player. Some DVDs require specific operation or

allow only limited operation during playback. When this

TITLE

Repeat Title

CHAPT

Repeat Chapter

TRACK

Repeat Track (non-PBC Video CDs only)

occurs, the symbol

appears on the TV screen, indi-

ALL

Repeat All Tracks (non-PBC Video CDs only)

cating that the operation is not permitted by the DVD

Player or is not available on the disc.

Repeat A-B

OFF

Repeat Off

On-Screen Display

General playback status can be displayed on the TV

Resume play from this point

Action prohibited or not available

screen. Some items can be changed on the menu.

Notes

On-screen display operation

ꢀ Some discs may not provide all of the features on the

on-screen display example shown below.

ꢀ If no button is pressed for 10 seconds, the on-screen

display disappears.

Press OSD during playback.

Press 3/4to select an item.

The selected item will be highlighted.

Press 1/2to change the setting of an item.

The number buttons can be also be used for setting

numbers (e.g., title number). For some functions,

press SELECT/ENTER to execute the setting.

DVD

Items

Function (Press 3/4to select desired item)

Selection Method

Title Number

Shows the current title number and total number of

, or

1 /3

1 /12

titles, and skips to the desired title number.

Numbers, SELECT/ENTER

Chapter Number

Time search

Shows the current chapter number and total number of

chapters, and skips to the desired chapter number.

, or

Numbers, SELECT/ENTER

Shows the elapsed playing time, and

searches the point by the elapsed time directly.

0:20:09

Numbers, SELECT/ENTER

Audio language

and Digital Audio

Output mode

1 ENG

5.1 CH

Shows the current audio soundtrack language,

encoding method, and channel number, and

changes the setting.

, or

AUDIO

Subtitle language

Shows the current subtitles language, and

1 2

, or

SUBTITLE

ABC

OFF

1 /1

changes the setting.

Angle

Shows the current angle number and total number of

angles, and changes the angle number.

, or

ANGLE

Sound

Shows the current sound mode (NORMAL or 3D SUR-

ROUND), and changes the setting.

NORM.

VCD1.1

VCD2.0

Items

Function (Press 3/4to select desired item)

Selection Method

Track Number

Shows the current track number, total number of tracks

and PBC On mode, and skip to the desired track number.

, or

1 /4

Numbers, SELECT/ENTER

Time

Shows the elapsed playing time (Display only)

0:20:09

–

Audio Channel

Shows the audio channel, and

changes the audio channel.

, or

STER.

AUDIO

Sound

Shows the current sound mode (NORMAL or 3D SUR-

ROUND), and changes the setting.

NORM.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation (Continued)

Initial Settings

Picture

You can set your own Personal Preferences on the

player.

TV Aspect DVD

4:3 Letterbox: Select when a standard 4:3 TV is con-

nected. Displays theatrical images with masking bars

above and below the picture.

4:3 Panscan: Select when a conventional TV set is

connected. The video material formatted in the Pan &

Scan style is played back in that style (Both sides of the

picture are cut off).

Initial Settings General Operation

Press SETUP.

The setup menu appears.

Original

English

French

Disc Audio

Disc Subtitle

Disc Menu

16:9 Wide: Select when a 16:9 wide TV is connected.

German

Spanish

Italian

4:3 Letterbox

Disc Audio

Rating

4:3 Panscan

Disc Subtitle

Country Code

TV Aspect

16:9 Wide

Disc Menu

Chinese

Polish

Menu Language

Progressive Scan

Digital Audio Output

Rating

Country Code

Hungarian

Other – – – –

TV Aspect

Menu Language

Others

Progressive Scan

Digital Audio Output

Press 3/4to select the desired item.

Others

The screen will show the current setting for the

selected item, as well as alternate setting(s).

Progressive Scan DVD

While the desired item is selected, press 2, then

3/4to select the desired setting.

Progressive Scan Video provides the highest quality

pictures with less flickering.

If you are using the COMPONENT VIDEO OUT jacks,

but are connecting the DVD Player to a standard (ana-

log) television, set Progressive Scan to Off.

If you are using the Component Video jacks for

connection to a TV or monitor that is compatible with a

progressive scan signal, set Progressive Scan to On.

Press SELECT/ENTER to confirm your selection.

Some items require additional steps.

Press SETUP, RETURN, or PLAY to exit the

setup menu.

Language

Disc Language DVD

Select a language for the disc’s Menu, Audio, and

Subtitle.

Original : The original language set for the disc is selected.

Other : To select another language, press number buttons to

enter the corresponding 4-digit number according to the lan-

guage code list on page 27. If you enter the wrong language

code, press CLEAR.

4:3 Letterbox

4:3 Panscan

16:9 Wide

Disc Audio

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Original

English

French

Disc Audio

Others

Disc Subtitle

Disc Menu

German

Spanish

Italian

Rating

Country Code

TV Aspect

Caution

Chinese

Polish

Menu Language

Progressive Scan

Digital Audio Output

Once the setting for progressive scan output is entered, an

image will only be visible on a progressive scan compatible

TV or monitor. If you set Progressive Scan to On in error, you

must reset the unit. Press STOP to stop any disc that is play-

ing. Next, press STOP again and hold it for five seconds

before releasing it. The video output will be restored to the

standard setting, and a picture will once again be visible on a

conventional analog TV or monitor.

Hungarian

Other – – – –

Others

Menu Language

Select a language for the setup menu. This is the menu

you see when you press SETUP.

English

Spanish

French

Disc Audio

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation (Continued)

Sound

Others

Digital Audio Output

The DRC, Vocal, PBC and Auto Play settings can

be changed.

ꢀ Press 3/4to select the desired item and press

SELECT/ENTER. The setting of the selected item is

changed between On and Off.

Each DVD disc has a variety of audio output options.

Set the player’s Digital Audio Output according to the

type of audio system you use.

DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM”

if you connected the DVD Player’s DIGITAL OUT jack to

a Dolby Digital decoder (or an amplifier or other equip-

ment with a Dolby Digital decoder).

Stream/PCM: Select “Stream/PCM” if you connected

the DVD Player’s DIGITAL OUT jack to an amplifier or

other equipment with a DTS decoder, Dolby Digital

decoder or MPEG decoder.

Disc Audio

Disc Subtitle

Disc Menu

Rating

DRC

Off

Vocal

PBC

Auto Play

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

PCM: Select when connected to a 2-channel digital

stereo amplifier. The DVD player outputs sounds in the

PCM 2ch format when you play a DVD video disc

recorded on the Dolby Digital, MPEG1, or MPEG2

recording system.

Others

Dynamic Range Control (DRC) DVD

With the DVD format, you can hear a program’s sound-

track in the most accurate and realistic presentation

possible, thanks to digital audio technology. However,

you may wish to compress the dynamic range of the

audio output (the difference between the loudest sounds

and the quietest ones). Then, you may listen to a movie

at a lower volume without losing clarity of sound. Set

DRC to On for this effect.

DOLBY

Disc Audio

Disc Subtitle

Disc Menu

Rating

_DIGITAL/PCM

Stream/PCM

PCM

Country Code

Sample Freq.

48 KHz

TV Aspect

Menu Language

96KHz

Progressive Scan

Digital Audio Output

Others

Vocal DVD

Set Vocal to On only when a multi-channel karaoke

DVD is playing. The karaoke channels on the disc will

mix into normal stereo sound.

Sample Frequency

To change the Sample Frequency setting, first select

the desired Digital Audio Output as indicated as above.

If your receiver or amplifier is NOT capable of handling

96KHz signals, select 48KHz. When this choice is

made, this unit will automatically convert any 96KHz

signals to 48KHz so your system can decode them.

If your receiver or amplifier is capable of handling

96KHz signals, select 96KHz. When this choice is

made, this unit will pass each type of signal through

without any further processing.

VCD2.0

PBC

Set Playback Control (PBC) to On or Off.

On: Video CDs with PBC are played according to the PBC.

Off: Video CDs with PBC are played the same way as Audio

CDs.

Auto Play DVD

You can set up the DVD Player so a DVD disc automat-

ically starts playing whenever the DVD is inserted.

If Auto Play mode is set to On, this DVD player will

search a title that playback time is long most and then

play back the title automatically.

On: Auto Play function is activated.

Off: Auto Play function is not activated.

Note

The Auto Play function may not work for some DVDs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation (Continued)

Parental Control

DVD

Country Code

Enter the code of a country/area whose standards were

used to rate the DVD video disc, referring to the list

(See “Country Code List”, page 28.).

Rating DVD

Movies on DVDs may contain scenes not suitable for

children. Therefore, discs may contain Parental Control

information that applies to the complete disc or to

certain scenes on the disc. These scenes are rated

from 1 to 8, and alternatively, more suitable scenes are

available for selection on some discs. Ratings are

country-dependent. The Parental Control feature allows

you to prevent discs from being played by your children

or to have certain discs played with alternative scenes.

Disc Audio

Code Set

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

Disc Subtitle

Disc Menu

Select Country Code using the 3/4buttons on

the setup menu.

Rating

Country Code

TV Aspect

2 ^{While Country Code is selected, press 2.}

Menu Language

Progressive Scan

Digital Audio Output

Unlock

Change

3 ^{Follow step 3 of “Rating” on left.}

Others

4 ^{Select the first character using the 3/4buttons.}

Select “Rating” on the Setup menu using the

3/4buttons.

Shift the cursor using 2 button and select the

second character using 3/4buttons.

2 ^{While “Rating” is selected, press 2.}

Press SELECT/ENTER to confirm your country

code selection, then press SETUP to exit the

menu.

When you have not entered a password yet.

Enter a 4-digit password using the numbered but-

tons to create a personal 4-digit security password.

then press SELECT/ENTER. Enter the 4-digit pass-

word again and press SELECT/ENTER to verify.

When you have already entered a password;

Enter a 4-digit password using the numbered but-

tons to confirm the personal 4-digit security pass-

word, then press SELECT/ENTER.

Note

Confirmation of the 4-digit password is necessary when

the code is changed (see “Changing the 4-digit code”

below.).

Changing the 4-digit code

1 Follow Steps 1-2 as shown above to the left (Rating).

2 Enter the old code, then press SELECT/ENTER.

3 Select Change using 3/4buttons then press

SELECT/ENTER.

4 Enter the new 4-digit code, then press

SELECT/ENTER.

If you make a mistake before pressing SELECT/ENTER,

press CLEAR and enter 4-digit security password again.

Select a rating from 1 to 8 using the 3/4but-

tons. One (1) has the least playback restrictions.

Eight (8) has the most playback restrictions.

Unlock: If you select Unlock, Parental Control is

not active. The disc will play in full.

5 Enter exactly the same code a second time and veri-

fy by pressing SELECT/ENTER.

Ratings 1 to 8: Some discs contain scenes not

suitable for children. If you set a rating for the play-

er, all disc scenes with the same rating or lower will

be played. Higher rated scenes will not be played

unless an alternative scene is available on the disc.

The alternative must have the same rating or a

lower one. If no suitable alternative is found, play-

back will stop. You must enter the 4-digit password

or change the rating level in order to play the disc.

6 Press SETUP to exit the menu.

If you forget your 4-digit code

If you forget your password, to clear the current pass-

word, follow the procedure below.

1 Press SETUP to display the setup menu.

2 Use the Number buttons to enter the 6-digit number

“210499”.

The 4-digit password is cleared. “P CLr” appears on the

display for a moment.

Enter a new code as shown above to the left (Rating).

Press SELECT/ENTER to confirm your rating

selection, then press SETUP to exit the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD and Video CD

Playing a DVD and Video CD

Notes

ꢀ If Parental Control is set and the disc is not within the

Rating settings (not authorized), the 4-digit code must

be entered and/or the disc must be authorized (see

“Parental Control”, on page 15).

VCD2.0

VCD1.1

Playback Setup DVD

ꢀ Turn on the TV and select the video input source con-

nected to the DVD player.

ꢀ Audio system: Turn on the audio system and select

the input source connected to the DVD player.

ꢀ DVDs may have a region code.

Your player will not play discs that have a region code

different from your player. The region code for this

player is 1 (one).

Press OPEN/CLOSE to open the disc tray.

Exchanging discs during playback

Load your chosen disc in the tray, with the

ꢀ Press DISC EX-CHANGE on the front panel during

playback to open the disc tray.

ꢀ Press DISC SKIP to rotate the disc trays to the

desired position. The carousel will rotate clockwise by

one disc increments.

playback side down.

Do not load a disc in the

left and light side position.

Center position

ꢀ Exchange the discs and press DISC EX-CHANGE or

OPEN/CLOSE to close the disc tray.

Note

• Discs can be loaded one at a time by pressing

DISC SKIP to rotate the carousel.

ꢀ The disc tray presently loaded in the play position can

not be exchanged.

Press OPEN/CLOSE to close the tray.

READING appears on the TV screen, and playback

starts automatically. If playback does not start,

press PLAY.

In some cases, the disc menu might appear

instead.

Skipping discs

Press DISC SKIP during play or when playback is

stopped.

Notes

ꢀ When DISC SKIP is pressed, the disc tray rotates and

playback begins from the beginning of the next disc.

ꢀ If there is no disc on the next disc tray, the following

disc tray will be selected.

ꢀ When DISC SKIP is pressed during playback of disc

5, playback of disc 1 will start.

If a menu screen is displayed

The menu screen may be displayed first after loading a

DVD or Video CD which offer a menu.

DVD

Use the 1/2/3/4 buttons to select the title/chapter you

want to view, then press SELECT/ENTER to start play-

back.

Press TOP MENU or MENU to return to the menu

screen.

Exchanging the disc and starting playback

1.Press OPEN/CLOSE during playback or when play-

back is stopped.

Play stops (if pressed during playback), the disc tray opens

and the disc that was in the play position comes to the front.

2.Exchange the disc.

3.Press OPEN/CLOSE or PLAY again.

The tray closes and playback begins (with the disc

that was in front).

VCD2.0

^ꢀUse the number buttons to select the track you want

to view.

Press RETURN to return to the menu screen.

^ꢀMenu setting and the exact operating procedures for

using the menu may differ depending on the disc.

Follow the instructions on the each menu screen.

You also may set PBC to Off under setup. See page

14.

After operation

When the unit is not in use, remove the disc and press

POWER to turn off the DVD player.

Notes

ꢀ Do not move the DVD player during playback. Doing

so may damage the disc and the DVD player.

ꢀ Use the OPEN/CLOSE button on the remote control

or DVD player to open and close the disc tray. Do not

push the disc tray while it is moving. Doing so may

cause the DVD player to malfunction.

ꢀ Do not push up the disc tray or put any objects other

than discs on the disc tray. Doing so may cause the

DVD video player to malfunction.

Caution

–

Do not touch the loading drawer and carousel while

they are in motion, and do not attempt to rotate the

carousel by hand; doing so could result in incorrect

operation of the player and/or damage to the discs.

ꢀ Keep your fingers well clear of the disc tray as it is

closing. Be especially careful with children’s fingers

around the closing disc tray as there is a risk of

personal injury.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD and Video CD

General Features

Still Picture and Frame-by-Frame playback

VCD2.0

VCD1.1

DVD

1 Press PAUSE/STEP during playback.

The player will now go into PAUSE mode.

2 You can advance the picture frame-by-frame by

pressing PAUSE/STEP repeatedly on the remote con-

trol.

Note

Unless stated otherwise, all operations described use

the remote control. Some features may also be

available on the Setup menu.

1 /3

DVD

Moving to another TITLE

VCD2.0

VCD1.1

Slow Motion DVD

When a disc has more than one title, you can move to

another title as follows:

^ꢀPress OSD, then press the appropriate numbered

button (0-9) to select a title number.

1 Press SLOW t or T during playback.

The player will enter SLOW mode.

2 Use the SLOW t or T to select the required speed:

t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or

T 1/16, T 1/8, T 1/4 or T 1/2 (forward).

3 To exit slow motion mode, press PLAY.

Moving to another CHAPTER/TRACK

1 /12

1 /3

VCD1.1

DVD

Notes

When a title on a disc has more than one chapter or a

disc has more than one track, you can move to another

chapter/track as follows:

Slow motion playback in reverse is not applicable for

Video CD.

ꢀ Press SKIP/SCAN . or > briefly during

playback to select the next chapter/track or to return

to the beginning of the current chapter/track.

^ꢀPress . twice briefly to step back to the previous

chapter/track.

^ꢀTo go directly to any chapter/track during DVD

playback, press OSD. Then, press 3/4to select the

chapter/track icon. Then, enter the chapter/track

number using the numbered buttons (0-9).

VCD2.0

VCD1.1

Random Karaoke DVD

1 Press RANDOM during playback or in stop mode.

The unit automatically begins Random Playback and

“RANDOM(1-3)” appears on the display window.

• RANDOM1: Plays all the tracks on a single disc in random

order and then stops.

• RANDOM2: Plays all the tracks on current disc in

random order and then plays all the tracks on each suc-

ceeding disc in random order and then stops.

Note

• RANDOM3: Plays 2 tracks randomly from a disc and then

plays 2 tracks randomly from a different disc until all

tracks on all discs have been played.

For two-digit numbers, press the numbered buttons

(0-9)in rapid succession.

VCD2.0

VCD1.1

Search DVD

2 To return to normal playback, press RANDOM until

“RANDOM” disappears on the display window.

1 Press and hold SKIP/SCAN . or > for about

two seconds during playback.

The player will now go into SEARCH mode.

2 Press and hold SKIP/SCAN . or > repeatedly

to select the required speed: mX2, mX4, mX16,

mX100 (backward) or MX2, MX4, MX16,

MX100 (forward).

Tips

By pressing SKIP/SCAN > during Random playback,

the unit selects another title (track) and resumes

Random playback.

With a Video CD, the Search speed changes: mX2,

mX4, mX8, (backward) or MX2, MX4, MX8,

(forward).

Notes

ꢀ This function only works with DVD Karaoke discs and

video CD without PBC.

3 To exit SEARCH mode, press PLAY.

ꢀ DVD karaoke works only RANDOM 1 function.

ꢀ On a Video CD with PBC, you must set PBC to Off on

the setup menu to use the Random function. See

page 14.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD and Video CD

General Features (continued)

0:20:09

-:--:--

Time Search DVD

VCD2.0

VCD1.1

Repeat A-B DVD

The Time Search function allows you to start playing at

any chosen time on the disc.

OFF

1 Press OSD during playback. The on-screen display

appears on the screen.

The Time Search box shows the elapsed playing time of the

current disc.

To repeat a sequence in a title :

1 Press A-B at your chosen starting point.

“ A * ” appears briefly on the TV screen.

2 Within 10 seconds, press 3/4to select the Time

Search icon in the on-screen display.

The “-:--:--” appears in the Time Search box.

2 Press A-B again at your chosen end point.

“A B” appears briefly on the TV screen, and the repeat

sequence begins (“AsB” appears the display window).

3 Within 10 seconds, use the number buttons to enter

the required start time. Enter hours, minutes, and sec-

onds from left to right in the box.

If you enter the wrong numbers, press CLEAR to remove the

numbers you entered. Then enter the correct numbers.

3 To cancel the sequence, press A-B.

VCD2.0

VCD1.1

Repeat DVD

TITLE

TRACK

CHAPT

ALL

OFF

4 Within 10 seconds, press SELECT/ENTER to confirm

the start time.

Playback starts from the selected time on the disc. If you enter

an invalid time, playback will continue from the current point.

DVD Video Discs - Repeat Chapter/Title/All/Off

1 To repeat the currently playing chapter, press

REPEAT.

The Repeat Chapter icon appears on the TV screen.

3D SUR

NORM.

VCD2.0 VCD1.1

DVD

3D Surround

2 To repeat the title currently playing, press REPEAT a

second time.

The Repeat Title icon appears on the TV screen.

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theater system.

To repeat entire all disc contents, press REPEAT a third time.

The Repeat All icon appears on the TV screen.

4 To exit Repeat mode, press REPEAT a fourth time.

The Repeat Off icon appears on the TV screen.

1 Press OSD during playback.

2 Press 3 or 4 to select the sound option.

Video CDs - Repeat Track/Disc/All/Off

The sound option will be highlighted.

1 To repeat the track currently playing, press REPEAT.

The Repeat Track icon appears on the TV screen.

3 Press 1 or 2 to to select “3D SUR”.

To turn off the 3D Surround effect, select “NORM”.

2 To repeat the disc currently playing, press REPEAT a

second time.

The Repeat Disc icon appears on the TV screen.

VCD2.0

VCD1.1

Zoom DVD

To repeat entire all disc contents, press REPEAT a third time.

The Repeat All icon appears on the TV screen.

The Zoom function allows you to enlarge the video

image and to move through the enlarged image.

4 To exit Repeat mode, press REPEAT a fourth time.

The Repeat Off icon appears on the TV screen.

1 Press ZOOM during playback or still playback to acti-

vate the Zoom function.

If you press ZOOM repeatedly, the magnification level

increases up to six steps.

Note

On a Video CD with PBC, you must set PBC to Off on the

setup menu to use the Repeat function. See page 14.

2 Use the 1/2/3/4buttons to move through the

zoomed picture.

3 Press CLEAR to resume normal playback or return to

the paused image.

Note

The zoom function may not work for some DVDs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with DVD and Video CD

General Features (continued)

DVD

Special DVD Features

VCD2.0

VCD1.1

DVD

Marker Search

Checking the contents of DVD discs:

Menus

DVDs may offer menus that allow you to access special

features. To use the disc menu, press MENU. Then,

press the appropriate number button to select an option.

Or, use the 1/2/3/4buttons to highlight your selection,

then press SELECT/ENTER.

MARKER SEARCH

1/9

You can start playback from a memorized point. Up to

nine points can be memorized.

To enter a mark, follow these steps.

1 During disc playback, press MARKER when

playback reaches the spot that you want to

memorize.

The Marker icon will appear on the TV screen briefly.

Title Menu DVD

1 Press TOP MENU.

Repeat step 1 to enter up to nine Marker points on a disc.

To Recall a Marked Scene

1 During disc playback, press SEARCH.

The MARKER SEARCH menu will appear on the screen.

If the current title has a menu, the menu will appear on the

screen. Otherwise, the disc menu may appear.

2 The menu can list camera angles, spoken language

and subtitle options, and chapters for the title.

2 Within 10 seconds, press 1/2 to select a Marker

number that you want to recall.

3 To remove the title menu, press TOP MENU again.

3 Press SELECT/ENTER.

Playback will start from the Marked scene.

Disc Menu DVD

1 Press MENU.

The disc menu is displayed.

4 To remove the MARKER SEARCH menu, press

SEARCH.

2 To remove the disc menu, press MENU again.

To clear a Marked Scene

1 During disc playback, press SEARCH.

1 /1

DVD

The MARKER SEARCH menu will appear on the screen.

Camera Angle

2 Press 1/2 to select the Marker number that you want

If the disc contains scenes recorded at different camera

angles, you can change to a different camera angle

during playback.

to erase.

3 Press CLEAR.

The Marker number will be erased from the list.

^ꢀPress ANGLE repeatedly during playback to select a

desired angle.

4 Repeat steps 2 and 3 to erase additional Marker

The number of the current angle appears on the display.

numbers.

5 To remove the MARKER SEARCH menu, press

Changing the Audio Language

SEARCH.

1 ENG

5.1 CH

DVD

Press AUDIO repeatedly during playback to hear a dif-

ferent audio language or audio track.

VCD2.0

VCD1.1

Changing the Audio Channel

Press AUDIO repeatedly during playback to hear a dif-

ferent audio channel (STER., LEFT or RIGHT).

ABC

1 ENG

DVD

Subtitles

Press SUBTITLE repeatedly during playback to see the

different subtitle languages.

Note

appears, the feature is not available on the disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with Audio CD and MP3/WMA Disc

Notes on MP3/WMA Recordings

Playing an Audio CD and MP3/WMA Disc

About MP3

MP3

WMA

^ꢀAn MP3 file is audio data compressed by using the

MPEG1 audio layer-3 file-coding scheme. We call

files that have the “.mp3” file extension “MP3 files”.

^ꢀThe player can not read an MP3 file that has a file

extension other than “.mp3”.

The DVD Player can play MP3/WMA formatted record-

ings on CD-ROM, CD-R or CD-RW discs.

Before playing MP3/WMA recordings, read the notes on

MP3/WMA Recordings on right.

Insert a disc and close the tray.

About WMA(Window Media Audio)

^ꢀAn WMA file is a Microsoft audio compression

technology.

^ꢀWMA(Windows Media Audio) offers double the audio

compression of the MP3 format.

Audio CD; Audio CD menu appears on the TV

screen go to step 4.

MP3/WMA disc; The MP3/WMA-JPEG choice

menu appears on the TV screen. Go to step 2

MP3 WMA

JPEG

Microsoft, Windows Media, and the Windows

Logo are trademarks or registered trademarks

of Microsoft Corporation in both the United

States and other countries

Press 3/4to select the MP3/WMA then press

SELECT/ENTER.

MP3/WMA Disc compatibility with this player is

The MP3/WMA menu appears on the TV screen.

Press RETURN to move to the MP3/WMA-JPEG

choice menu.

limited as follows:

1. Sampling Frequency / only at 44.1kHz (MP3),

22.05 - 44.1kHz (WMA)

2. Bit rate / within 32 - 320kbps (MP3),

32 - 128kbps (WMA)

Program

MP3/WMA

TRACK 1.mp3

TRACK 2.mp3

TRACK 3.mp3

TRACK 4.mp3

TRACK 5.mp3

TRACK 6.mp3

TRACK 7.mp3

TRACK 8.mp3

3. CD-R physical format should be “ISO 9660”

4. If you record MP3/WMA files using the software

which cannot create a FILE SYSTEM, for example

“Direct-CD” etc., it is impossible to playback

MP3/WMA files. We recommend that you use “Easy-

CD Creator”, which creates an ISO9660 file system.

5. A single session disc requires MP3/WMA files in the

first track. If there is no MP3/WMA file in the 1st

track, it cannot playback MP3/WMA files. If you wish

to playback MP3/WMA files, format all the data in

the disc or use a new one.

6. File names should be named using 8 letters or less

and must incorporate “.mp3” or “.wma” extension

e.g. “********.MP3” or “********.WMA”.

7. Do not use special letters such as “/ : * ? “ < > ” etc.

8. Total number of files on the disc should be less than

650.

Clear All

OFF

00:00

Press 3/4 to select a folder, and SELECT/ENTER.

A list of files in the folder appears.

Press 3/4to select a track then press PLAY or

SELECT/ENTER.

Playback starts.

During playback, the current track’s elapsed playing

time will appear on the display window and menu.

Playback will stop at the end of the disc.

Press TOP MENU to move to the next page.

Press MENU to move to the previous page.

This DVD player requires discs/recordings to meet

certain technical standards in order to achieve optimal

playback quality. Pre-recorded DVDs are automatically

set to these standards. There are many different types

of recordable disc formats (including CD-R containing

MP3 or WMA files). That require certain pre-existing

conditions (see above) to insure compatible playback.

Program

MP3/WMA

TRACK 1.mp3

TRACK 01

TRACK 02

TRACK 03

TRACK 04

TRACK 05

TRACK 06

TRACK 07

TRACK 2.mp3

TRACK 3.mp3

TRACK 4.mp3

TRACK 5.mp3

TRACK 6.mp3

TRACK 7.mp3

TRACK 8.mp3

Clear All

OFF

Clear All

NORM.

0: 56: 18

STER.

00:00

Customers should also note that permission is

required in order to download MP3/WMA files and

music from the Internet. Our company has no right

to grant such permission. Permission should

always be sought from the copyright owner.

Audio CD menu

MP3/WMA menu

Tip

If you are in a file list and want to return to the Folder

list, use the 3/4to highlight and press

SELECT/ENTER to return to the previous menu screen.

Caution

–

If you record a disc using a personal computer, even if it

is recorded in a compatible format, there are cases in

which it may not play because of the settings of the

application software used to create the disc. (Check with

the software publisher for more detailed information.)

5 ^{To stop playback at any other time, press STOP.}

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with Audio CD and MP3/WMA Disc (Continued)

MP3

WMA

Pause

Random with Audio CD

1 Press PAUSE/STEP during playback.

2 To return to playback, press PLAY or press

PAUSE/STEP again.

1 Press RANDOM during playback or in stop mode.

The unit automatically begins Random Playback and

“RANDOM(1-3)” appears on the display window.

• RANDOM1: Plays all the tracks on a single disc in random

order and then stops.

• RANDOM2: Plays all the tracks on current disc in

random order and then plays all the tracks on each suc-

ceeding disc in random order and then stops.

MP3

WMA

Moving to another Track

^ꢀPress SKIP/SCAN . or > briefly during

playback to go to the next track or to return to the

beginning of the current track.

^ꢀPress SKIP/SCAN . twice briefly to step back to

the previous track.

• RANDOM3: Plays 2 tracks randomly from a disc and then

plays 2 tracks randomly from a different disc until all

tracks on all discs have been played.

2 To return to normal playback, press RANDOM until

“RANDOM” disappears on the display window.

^ꢀIn case of audio CD, to go directly to any track, enter

the track number using the numbered buttons (0-9)

during playback.

Repeat A-B

MP3

WMA

To repeat a sequence.

1 During disc playback, press A-B at your chosen start-

1 Press and hold SKIP/SCAN . or > for about

two seconds during playback.

The player will now go into SEARCH mode.

ing point.

The Repeat icon and “ * ” appears on the menu screen.

2 Press A-B again at your chosen end point.

The Repeat icon and “A B” appears on the menu screen,

and the sequence begins to play repeatedly.

2 Press and hold SKIP/SCAN . or > repeatedly

to select the required speed: mX2, mX4, mX8

(backward) or MX2, MX4, MX8 (forward).

Search speed and direction are indicated on the menu

screen.

3 To exit the sequence and return to normal play, press

A-B again.

The Repeat icon and “OFF” appears on the menu screen.

3 To exit SEARCH mode, press PLAY.

3D Surround

MP3

WMA

Random with MP3/WMA Disc

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theater system.

1 Press RANDOM during playback or when playback is

stopped.

The unit automatically begins Random Playback and

RANDOM or “RAND.” appears on the display window

and menu screen.

1 Press OSD during playback.

2 Use 1 or 2 to select the sound option.

2 To return to normal playback, press RANDOM repeat-

edly until RANDOM or “RAND.” disappears on the

display window and menu screen.

The sound option will be highlighted.

3 Use 3 or 4 to to select “3D SUR”.

To turn off the 3D Surround effect, select “NORM”.

MP3

WMA

Repeat Track/All/Off

1 To repeat the track currently playing, press REPEAT.

The Repeat icon and “TRACK” appears on the menu

screen.

Changing the Audio Channel

Press AUDIO repeatedly during playback to hear a

different audio channel (STER., LEFT, or RIGHT).

2 To repeat all tracks on a disc, press REPEAT a sec-

ond time.

The Repeat icon and “ALL” appears on the menu screen.

Repeat Track/Disc/All/Off

3 To cancel Repeat mode, press REPEAT a third time.

The Repeat icon and “OFF” appears on the menu screen.

1.To repeat the track currently playing, press REPEAT.

The Repeat icon and “TRACK” appear on the menu screen.

2.To repeat all tracks on a disc, press REPEAT a

second time.

The Repeat icon and “DISC” appear on the menu screen.

3.To repeat entire all disc contents, press REPEAT third

time.

The Repeat icon and “All” appears on the menu screen.

4.To cancel Repeat mode, press REPEAT a fourth time.

The Repeat icon and “OFF” appear on the menu screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation with JPEG Disc

JPEG

Moving to another File

Viewing a JPEG disc

Press SKIP/SCAN . or > once during viewing a

This DVD Player can play discs with JPEG files and

Kodak picture CD. Before playing JPEG recordings,

read the notes on JPEG Recordings on right.

picture to advance to the next file or to the previous file.

Still Picture

1 Press PAUSE/STEP during slide show.

The player will now go into PAUSE mode.

2 To return to the slide show, press PLAY or press

PAUSE/STEP again.

Insert a disc and close the tray.

The MP3/WMA-JPEG choice menu appears on the

TV screen.

MP3 WMA

JPEG

To flip the picture

Press 3/4during showing a picture to flip the

picture horizontally or a vertically.

Press 3/4to select the JPEG then press

SELECT/ENTER.

The JPEG menu appears on the TV screen.

To rotate picture

Press 1/2 during showing a picture to rotate the

picture clockwise or counter clockwise.

JPEG

Folder1

Folder2

Folder3

Folder4

Folder5

Folder6

Folder7

Folder8

Notes on JPEG Recordings

Off

Slide Speed

^ꢀDepending upon the size and number of the JPEG

files, it could take a long time for the DVD player to

read the disc’s contents. If you don’t see an on-

screen display after several minutes, some of the files

are too big — reduce the resolution of the JPEG files

to less than 2 mega pixels and burn another disc.

Press 3/4 to select a folder, and SELECT/ENTER.

A list of files in the folder appears.

Press RETURN to move to the MP3/WMA-JPEG

choice menu.

^ꢀTotal number of files and folders on the disc should

be less than 650.

Tip

If you are in a file list and want to return to the Folder

list, use the 34 buttons on the remote to highlight

^ꢀSome disc may be incompatible due to different

recording format or condition of disc.

“

and press SELECT/ENTER to return to the

previous menu screen.

”

ꢀ When you are using software such as “Easy CD

Creator” to burn the jpeg files into the CD-R, ensure

that all the selected files have the “.jpg” extensions

when copying into the CD layout.

If you want to view a particular file, press 3/4to

highlight a file and press SELECT/ENTER or

PLAY.

ꢀ If the files have “.jpe” or “.jpeg” extensions, please

rename them as “.jpg” files.

Viewing the file proceeding starts.

During viewing a file, press RETURN to move to

the previous menu (JPEG menu).

Press TOP MENU to move to the next page.

Press MENU to move to the previous page.

ꢀ File names without “.jpg” extension will not be able to

be read by this DVD player. Even though the files are

shown as JPEG image files in windows explorer.

Folder1

JPEG

Picture1.jpg

Picture2.jpg

Picture3.jpg

Picture4.jpg

Picture5.jpg

Picture6.jpg

Picture7.jpg

Caution

–

If you record a disc using a personal computer, even if it

is recorded in a compatible format, there are cases in

which it may not play because of the settings of the

application software used to create the disc. (Check with

the software publisher for more detailed information.)

5/32

1024X768 Picture5.jpg

Off

5/32

1024X768

Slide Speed

Tip

There are three viewing Slide Speed options: Fast,

Normal, Slow, and Off. Press 1/2 to highlight the Slide

Speed then press 3/4 to select the option you want to

use, and press SELECT/ENTER.

To stop viewing at any other time, press STOP.

The JPEG menu appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCD2.0

VCD1.1

MP3

WMA

Programmed Playback

The Program function enables you to store your favorite

tracks from any disc in the player memory.

Programmed Playback with MP3/WMA

disc

Program can contain 30 tracks.

Follow step 1 of “Programmed Playback with

Audio CD ” on left.

Programmed Playback with Audio CD

Select a track, then press SELECT/ENTER to

Press PROGRAM during playback or in the stop

mode to enter the Program Edit mode.

place the selected track on the Program list.

The

mark will appear to the right of the word Program

Repeat step 2 to place additional tracks on the

Program list.

on the right side of the menu screen.

Program

TRACK 8.mp3

MP3/WMA

Note

TRACK 1.mp3

TRACK 2.mp3

TRACK 4.mp3

TRACK 3.mp3

TRACK 2.mp3

TRACK 3.mp3

TRACK 4.mp3

TRACK 5.mp3

TRACK 6.mp3

TRACK 7.mp3

TRACK 8.mp3

Press PROGRAM to exit the Program Edit mode.

The

mark will disappear.

Clear All

OFF

Move to the Disc number selection column by

00:00

pressing 3 repeatedly.

MP3/WMA menu

3 ^{Select an audio disc number using 1/2.}

Follow steps 6-9 of “Programmed Playback with

Audio CD ” on left.

Select a track, then press SELECT/ENTER to

place the selected track on the Program list.

Programmed Playback with Video CD

Note

You must select a disc number of audio CD.

If selected track is other kind of disc (DVD or MP3 etc.),

the track skips during programmed playback.

Note

On a Video CD with PBC, you must set PBC to Off on the

setup menu to use the Program function. See page 14.

Repeat steps 2-4 to place additional tracks on

the Program list.

Insert Video CD and close the tray.

Press PROGRAM while playback is stopped.

The VCD Program menu will appear.

Program

TRACK 12

TRACK 08

TRACK 10

TRACK 01

TRACK 02

TRACK 03

TRACK 04

TRACK 05

TRACK 06

TRACK 07

VCD

Program

TRACK 04

TRACK 03

TRACK 01

TRACK 02

TRACK 03

TRACK 04

TRACK 05

Clear All

NORM.

0: 56: 18

STER.

Audio CD menu

Clear All

NORM.

0: 56: 18

STER.

Press 2.

The programmed track you selected last is highlighted on

the program list.

Video CD menu

Press 3/4to select the track you want to start

playing.

Press TOP MENU to move to the next page.

Press MENU to move to the previous page.

Note

Press RETURN or PROGRAM to exit the Program menu.

Follow steps 2-8 of “Programmed Playback with

Audio CD ” on left.

Press PLAY to start.

Playback begins in the order in which you programmed

the tracks and “PROG.” appears on the menu screen.

Playback stops after all of the tracks on the Program list

have played once.

To resume normal playback from

programmed playback, press PROGRAM.

“PROG.” indicator disappears in the display window.

To resume normal playback from programmed

playback, select a track of CD list and then

press SELECT/ENTER.

“PROG.” indicator disappears on the menu screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCD2.0

VCD1.1

MP3

WMA

Programmed Playback

Repeat Programmed Tracks

^ꢀTo repeat the track currently playing, press REPEAT.

The Repeat icon and “TRACK” appears on the menu

screen.

^ꢀTo repeat all tracks on the program list, press

REPEAT a second time.

The Repeat icon and “ALL” appears on the menu screen.

^ꢀTo cancel Repeat mode, press REPEAT a third time.

The Repeat icon and “OFF” appears on the menu screen.

Erasing a Track from Program List

1 Press PROGRAM during playback (Audio CD and

MP3/WMA disc only) or in the stop mode to enter the

Program Edit mode.

The

mark will appear.

2 Press 2 to move to the Program list.

3 Use 3/4to select the track that you wish to erase

from the Program list.

4 Press CLEAR.

The track will be erased from the Program list.

Erasing the Complete Program List

1 Follow steps 1-2 of “Erasing a Track from Program

List” as above.

2 Use 3/4to select “Clear All”, then press

SELECT/ENTER.

The complete Program for the disc will be erased.

The programs are also cleared when the disc is removed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Information

Screen Saver

Setting Remote control codes of

DVD player

The screen saver picture appears when you leave the

DVD Player in stop mode for about five minutes.

After the Screen Saver has been engaged for about five

minutes, the DVD Player will automatically turn itself off.

• This DVD player support two remote control codes :

C004 and C044.

• When the unit is shipped from the factory, the remote

code is set to C004.

Video Mode Setting

• To set the code of the player to C044, press PAUSE

then input “9872” using number buttons.

VCD2.0

VCD1.1

DVD

^ꢀWith certain discs, the playback picture may be flick-

ering or Dot Crawl is shown on straight lines. That

means Vertical interpolation or De-interlace is not

perfectly matched with the disc. In this case, the

picture quality may be improved by changing the

video mode.

• To set the code of the player to C004, press PAUSE

then input “9871” using number buttons.

• You can change the code of the player only when

NO DISC appears in the display window.

• Changed Remote control codes is displayed in the

Display window.

^ꢀTo change the video mode, press and hold OSD

about 3 seconds during disc playback. The new video

mode number selected is displayed on the TV screen.

Check whether the video quality has improved. If not,

repeat the above procedure until picture quality is

improved.

• Set the remote control codes of the Remote control to

the same setting (page 8).

Notes

^ꢀVideo mode change sequence:

MODE1 → MODE2 → MODE3 → MODE1

ꢀ This setting can not be used if a disc is playing.

ꢀ If a DVD has been loaded, be sure to press STOP

twice before proceeding.

^ꢀIf you turn off the power, the video mode will be back

to initial state (MODE1).

Detailed Descriptions for Video Modes

MODE1: The source material of the DVD video (film material

or video material) is determined from disc information.

MODE2: Suitable for playing film based content or video based

material recorded by the progressive scan method.

MODE3: Suitable for playing video based content with compar-

atively little motion.

Note

The video mode setting only works when the Progressive

Scan mode is set to “On” in the Setup menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Cause

Correction

Symptom

No power.

ꢀ The power cord is disconnected.

ꢀ Plug the power cord into the wall outlet

securely.

ꢀ No disc is inserted.

ꢀ Insert a disc. (Check that the DVD or,

audio CD indicator in the display

window is lit.)

The power is on, but

the DVD player does

not work.

ꢀ The TV is not set to receive DVD signal ꢀ Select the appropriate video input mode

No picture.

output.

on the TV so the picture from the DVD

player appears on the TV screen.

ꢀ The video cable is not connected

ꢀ Connect the video cable securely.

securely.

ꢀ The connected TV power is turned off.

ꢀ Turn on the TV.

No sound.

ꢀ The equipment connected with the

audio cable is not set to receive DVD

signal output.

ꢀ Select the correct input mode of the

audio receiver so you can listen to the

sound from the DVD player.

ꢀ The audio cables are not connected

ꢀ Connect the audio cable securely.

securely.

ꢀ The power of the equipment connected

with the audio cable is turned off.

ꢀ Turn on the equipment connected with

the audio cable.

ꢀ The Digital Audio Output is set to the

wrong position.

ꢀ Set the Digital Audio Output to the

correct position, then turn on the DVD

player again by pressing POWER.

The playback picture is ꢀ The disc is dirty.

ꢀ Clean the disc.

poor.

ꢀ No disc is inserted.

ꢀ Insert a disc. (Check that the DVD, or

audio CD indicator in the DVD display is

lit.)

The DVD player does

not start playback.

ꢀ An unplayable disc is inserted.

ꢀ Insert a playable disc. (Check the disc

type, color system, and Regional code.)

ꢀ The disc is placed upside down.

ꢀ The disc is not placed within the guide.

ꢀ Place the disc with the playback side

down.

ꢀ Place the disc on the disc tray correctly

inside the guide.

ꢀ The disc is dirty.

ꢀ Clean the disc.

ꢀ The Rating level is set.

ꢀ Cancel the Rating function or change

the rating level.

The remote control

does not work properly.

ꢀ The remote control is not pointed at the

remote sensor of the DVD player.

ꢀ Point the remote control at the remote

sensor of the DVD player.

ꢀ The remote control is too far from the

DVD player.

ꢀ Operate the remote control within 16 ft

(5 m).

ꢀ There is an obstacle in the path of the

ꢀ Remove the obstacle.

remote control and the DVD player.

ꢀ The batteries in the remote control are

ꢀ Replace the batteries with new ones.

exhausted.

ꢀ Set the remote control codes of both

DVD player and Remote control to the

same setting.

ꢀ Remote control code is different

between the DVD player and Remote

control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Code List

Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”

(See page 13).

Code Language

6566

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

6678

6890

6672

6682

6671

7789

6669

7577

6765

9072

6779

7282

6783

6865

7876

6978

6979

6984

7079

Abkhazian

Afar

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

7265

7387

7273

7285

7383

7378

7365

7165

7384

7465

7487

7578

7583

7575

7589

7579

7585

7679

7665

7686

Fiji

7678

7684

7775

7771

7783

7776

7784

7773

7782

7779

7778

7865

7869

7879

7982

8065

8083

7065

8076

8084

8185

8277

8279

8285

8377

8365

7168

8382

8372

8378

8368

Lingala

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

Singhalese

Slovak

Slovenian

Somali

Spanish

Sudanese

Swahili

Swedish

Tagalog

Tajik

Finnish

Lithuanian

Macedonian

Malagasy

Malay

Afrikaans

Albanian

Ameharic

Arabic

French

Frisian

Galician

Georgian

German

Greek

Malayalam

Maltese

Armenian

Assamese

Aymara

Maori

Greenlandic

Guarani

Gujarati

Hausa

Marathi

Azerbaijani

Bashkir

Moldavian

Mongolian

Nauru

Tamil

Basque

Tatar

Bengali; Bangla

Bhutani

Hebrew

Hindi

Nepali

Telugu

Thai

Norwegian

Oriya

Bihari

Hungarian

Icelandic

Indonesian

Interlingua

Irish

Tibetan

Tigrinya

Tonga

Breton

Panjabi

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Pashto, Pushto

Persian

Turkish

Turkmen

Twi

Polish

Italian

Portuguese

Quechua

Rhaeto-Romance

Rumanian

Russian

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kirghiz

Ukrainian

Urdu

Chinese

Corsican

Croatian

Czech

Uzbek

Vietnamese

Volapük

Welsh

Samoan

Sanskrit

Danish

Dutch

Korean

Scots Gaelic

Serbian

Wolof

English

Kurdish

Laothian

Latin

Xhosa

Esperanto

Estonian

Faroese

Serbo-Croatian

Shona

Yiddish

Yoruba

Zulu

Latvian, Lettish

Sindhi

Download from Www.Somanuals.com. All Manuals Search And Download.

Country Code List

Enter the appropriate code number for the initial setting “Country Code” (See page 15).

Code Country

Andorra

Eritrea

Spain

Ethiopia

Finland

Saint Lucia

Liechtenstein

Sri Lanka

Liberia

Lesotho

Lithuania

Luxembourg

Latvia

Libya

Morocco

Monaco

Seychelles

Sudan

Sweden

Singapore

Saint Helena

Slovenia

Svalbard and Jan Mayen

Islands

Slovak Republic

Sierra Leone

San Marino

Senegal

Somalia

Suriname

Saint Tome and Principe

Former USSR

El Salvador

Syria

Swaziland

Turks and Caicos Islands

Chad

French Southern

Territories

Togo

Thailand

Tadjikistan

Tokelau

Turkmenistan

Tunisia

Tonga

East Timor

Turkey

Trinidad and Tobago

Tuvalu

Taiwan

Tanzania

United Arab Emirates

Afghanistan

Antigua and Barbuda

Anguilla

Albania

Armenia

Netherlands Antilles

Angola

Antarctica

Argentina

American Samoa

Austria

Australia

Fiji

Falkland Islands

Micronesia

Faroe Islands

France

France (European

Territory)

Gabon

Great Britain

Grenada

Georgia

French Guyana

Ghana

Gibraltar

Greenland

Gambia

Moldavia

Madagascar

Marshall Islands

Macedonia

Mali

Myanmar

Mongolia

Aruba

Azerbaidjan

Bosnia-Herzegovina

Barbados

Bangladesh

Belgium

Burkina Faso

Bulgaria

Bahrain

Burundi

Benin

Bermuda

Brunei Darussalam

Bolivia

Brazil

Bahamas

Bhutan

Bouvet Island

Botswana

Belarus

Belize

Canada

Cocos (Keeling) Islands

Central African Republic

Congo

Switzerland

Ivory Coast

Cook Islands

Chile

Cameroon

China

Colombia

Costa Rica

Former Czechoslovakia

Cuba

Cape Verde

Christmas Island

Cyprus

Czech Republic

Germany

Djibouti

Denmark

Dominica

Dominican Republic

Algeria

Ecuador

Estonia

Egypt

Western Sahara

Macau

Northern Mariana Islands

Martinique (French)

Mauritania

Montserrat

Malta

Guinea

Guadeloupe (French)

Equatorial Guinea

Greece

S. Georgia & S. Sandwich

Isls.

Guatemala

Guam (USA)

Guinea Bissau

Guyana

Hong Kong

Heard and McDonald

Islands

Honduras

Croatia

Haiti

Hungary

Indonesia

Ireland

Israel

India

British Indian Ocean

Territory

Iraq

Iran

Iceland

Italy

Jamaica

Mauritius

Maldives

MW Malawi

Mexico

Malaysia

Mozambique

Namibia

New Caledonia (French)

Niger

Norfolk Island

Nigeria

Nicaragua

Netherlands

Norway

Nepal

Nauru

Niue

New Zealand

Oman

Panama

Peru

Polynesia (French)

Papua New Guinea

Philippines

Pakistan

Ukraine

Uganda

United Kingdom

USA Minor Outlying

Islands

United States

Uruguay

Uzbekistan

Vatican City State

Saint Vincent &

Grenadines

Venezuela

Virgin Islands (British)

Virgin Islands (USA)

Vietnam

Vanuatu

Wallis and Futuna Islands

Samoa

Yemen

Mayotte

Yugoslavia

South Africa

Zambia

Zaire

Zimbabwe

Jordan

Japan

Kenya

Poland

Saint Pierre and Miquelon

Pitcairn Island

Puerto Rico

Portugal

Palau

Paraguay

Qatar

Reunion (French)

Romania

Russian Federation

Rwanda

Saudi Arabia

Solomon Islands

Kyrgyzstan

Cambodia6

Kiribati

Comoros

Saint Kitts & Nevis Anguilla

North Korea

South Korea

Kuwait

Cayman Islands

Kazakhstan

Laos

Lebanon

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

General

Power requirements

Power consumption

Dimensions (approx.)

Mass (approx.)

AC 120V , 60 Hz

14W

17.3 X 3.2 X 16.2 inches (440 X 80 X 410 mm) (w x h x d)

11.2 lbs (5.1 kg)

Operating temperature

Operating humidity

5˚C to 35˚C (41˚F to 95˚F)

5 % to 90 %

System

Laser

Semiconductor laser, wavelength 650 nm

NTSC

Signal system

Frequency response

DVD (PCM 96 kHz): 8 Hz to 44 kHz

DVD (PCM 48 kHz): 8 Hz to 22 kHz

CD: 8 Hz to 20 kHz

Signal-to-noise ratio

Harmonic distortion

Dynamic range

More than 100dB (ANALOG OUT connectors only)

Less than 0.008%

More than 100 dB (DVD)

More than 95 dB (CD)

Outputs

Video output

S-Video output

1 Vp-p 75 Ω, negative sync, RCA jack x 1

(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1

Component Video output

(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1

(CB/PB)/(CR/PR) 0.7 V (p-p), 75 Ω, RCA jack x 2

Audio output (coaxial)

Audio output (optical)

Audio output (analog 2ch)

0.5 V (p-p), 75 Ω, RCA jack x 1

Optical connector x 1

2.0 Vrms , 600 Ω, RCA jack (L, R) x 2

Accessories

Video cable . . . . . . . . . . . . . . . . . . . . . . .1

Audio cable . . . . . . . . . . . . . . . . . . . . . . .1

Remote control unit (RC5400VC) . . . . . . .1

Batteries (AAA size) . . . . . . . . . . . . . . . . .2

Warranty card (for USA) . . . . . . . . . . . . .1

Warranty card (for CANADA) . . . . . . . . . .1

User Guide . . . . . . . . . . . . . . . . . . . . . . .1

^ꢀDesign and specifications are subject to change without notice.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby

Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Download from Www.Somanuals.com. All Manuals Search And Download.

www.marantz.com

You can find your nearest authorized distributor or dealer on our website.

JAPAN

U.S.A.

Marantz Japan, Inc.

Marantz America, Inc.

Marantz Europe B.V.

35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan

1100 Maplewood Drive, Itasca, IL 60143, U.S.A.

EUROPE

P.O. Box 8744, 5605 LS Eindhoven, The Netherlands

is a registered trademark.

P/NO: 3834RS0062W

Printed in China

03/2003 MIT-lg 31AW851250

Download from Www.Somanuals.com. All Manuals Search And Download.

Kuppersbusch USA Cooktop EKI 4070M User Manual
Lenmar Enterprises Battery Charger PRO290B User Manual
Lenovo Computer Hardware 0C22230 User Manual
Lexmark Printer X746de User Manual
LG Electronics IP Phone IP8540 User Manual
Makita Cordless Saw BLS820 User Manual
Makita Grinder 906H User Manual
M Audio Drums Drums User Manual
M Audio Music Mixer Mulitmixer 6 User Manual
Meyer Cable Box 8100 SERIES BOSS REAR UNLOAD FORAGE BOX User Manual