Quick Installation Guide
Introduction
Your Marantz Professional DVDVideo player will playback digital
video discs, conforming to the universal DVDVideo standard.This
product has been modified to represent a region setting of 0 in
order to ensure its compatibility for commercial installations,
education applications, and international use.The unique features
of DVDVideo, such as selection of sound track, subtitle languages
and different camera angles (disc dependent), are all supported.
In addition to DVDVideo discs, you will be able to playback all
Video CDs, SVCDs, and Audio CDs.
UNPACKING
First check and identify the contents of your DVDVideo player package.
You should have the following items:
• DVDVideo player
• Instructions for use/ Quick installation guide
• CD-Rom owner’s manual
• Remote Control with batteries
• Rack kit
• Audio cable (stereo)
• SCART to 4-BNC Cable
• S-Video cable/Y/ C
If any item is damaged or missing, contact your retailer.
Keep the packaging materials for future transportation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Installation Guide
General Information
SAFETY PRECAUTIONS
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
C AUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
USA
C
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
LASER
Type
Wave lenght
LASER SAFETY
Semiconductor laser GaAlAs
650 nm (DVD)
780 nm (VCD/CD)
7 mW (DVD)
10 mW (VCD/CD)
60 degree.
This unit employs a laser. Only a qualified service person should remove the cover or
attempt to service this device, due to possible eye injury.
CLASS 1
LASER PRODUCT
Output Power
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
Beam divergence
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM (WARNING LOCATION: INSIDE ON LASER COVERSHIELD)
Functional Overview
FRONT OF PLAYER
1. ON/OFF
STOP
PLAY
2. Disc tray (behind door)
3. Tray OPEN/CLOSE key
4. Display
PAUSE
OPEN/CLOSE
5. STOP
ON/OFF
6. Previous title/chapter/track
7. PAUSE/Still/Step
8. Next title/chapter/track
9. Play
1
2
3
4
5
6
7
8
9
REAR OF PLAYER
1. Power supply
2. Digital audio output
3. Optical (Digital audio output)
4. Audio R; Audio output R
Audio L; Audio output L
5. Video (CVBS); Video output
6. A/V Euroconnector (Europe)
7. S-Video (USA)
20
18
16
14
12
10
8
6
4
2
21
19
17
15
13
11
9
7
5
3
1
8. I/O Port
1
2
3
4
5
6
7
8
REMOTE CONTROL
+
1.
OSD
(On-Screen Display) on/off
OSD
1
2
9
2.
Angle
select DVD camera angle
ANGLE
SUBTITLE
AUDIO
....
Subtitle language selector or subtitling on/off
1
4
2
5
8
0
3
6
9
Audio
spoken language selector
numeric key pad
3
4
5
3. 0-9
4. T-C
5. MENU
OK
title/chapter mode selector
select DVD defined menu
acknowledge menu selection
up/down/left/right cursor movement
previous chapter or track/ search back
next chapter or track/ search forward
play
7
T-C
RETURN
8
MENU
OK
6.
pause or still frame/ step frame
slow motion (1/2, 1/4, 1/8 speed
stop
select player settings menu (in stop mode only)
REPEAT*/A-B REPEAT chapter, track, title, disc
SHUFFLE/SCAN* shuffle or scan on/off
go back to previous menu step
6
7
SETUP
A-B REPEAT
SHUFFLE
SCAN
7. SETUP
8. RETURN
9.
Standby/Power ON
* Press key for about 1 second
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Installation Guide
Set Up
SETUP HIGHEST QUALITY A/V CONNECTION (EUROPE)
Connection to a TV with an A/V Euroconnector jack.
1. Connect the A/V Euroconnector on the rear of the player to the
corresponding connector on the TV using the cable supplied.
2. You can also opt to connect the audio Left and Right channel jacks on the
rear of the player to the corresponding jacks on your stereo system.
TV
20
18
16
14
12
10
8
6
4
2
21
19
17
15
13
11
9
7
5
3
1
Note:
A/V EUROCONNECTOR CABLE
Do not connect your DVD-player via your VCR, because the video quality
could be distorted by the copy protection system.
HIGHEST QUALITY A/V CONNECTION (USA)
Connection to a TV with an S-Video jack.
1. Connect the S-Video on the rear of the player to the corresponding
connector jack on the TV using the cable supplied.
S-VIDEO AUDIO
IN
IN
TV
2. Connect the audio Left and Right channel jacks on the rear of the player
to the corresponding jacks on the TV using the cable supplied. Alternatively,
you can use the same cable to connect the audio Left and Right jacks
on the rear of the player to the corresponding jacks on your stereo system.
20
18
16
14
12
10
8
6
4
2
21
1
15
11
9
5
3
S-VIDEO CABLE
AUDIO CABLE
EXCELLENT A/V CONNECTION
Connection to a TV with a video (CVBS) jack.
1. Connect the Video jack on the rear of the player to the corresponding jack
on the TV using the cable supplied.
2. Connect the audio Left and Right channel jacks on the rear of the player to
the corresponding jacks on the TV using the cable supplied. Alternatively, you
can use the same cable to connect the audio Left and Right jacks on the rear
of the player to the corresponding jacks on your stereo system.
S-VIDEO AUDIO
IN
IN
TV
1
16
12
10
6
4
21
17
1
11
5
Caution:
Do not connect the player’s audio output to the phono input of your
stereo system.
VIDEO CABLE
AUDIO CABLE
CONNECTIONTHE POWER SUPPLY
1. Plug the feed end of the power cord supplied into the Power connector
on the rear of the player.
2. Plug the supply end of the cord into an AC outlet.
Note
The player automatically adjusts to the local AC voltage.
Caution
Only qualified service personnel should remove the cover or attempt
to service this appliance.
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Installation Guide
Starting Up
INFRARED REMOTE CONTROL
Loading the batteries
1. Open the battery compartment cover.
2. Insert two ‘AAA’ (R03) batteries as indicated inside the battery compartment.
3. Customise your DVD-Video player in the Set-up menu.
4. Close the cover.
Caution
Do not mix old and new batteries and NEVER mix different types of
batteries (standard, alkaline, rechargeables, etc.).
OPERATION
Note
• Unless indicated otherwise, all operations can be performed using the
remote control. Always point the remote control directly at the player, making
sure there are no objects obstructing the path of the infrared beam.
• When there are corresponding keys on the front panel, these can also be used.
SWITCHING ON
1. Switch on the TV and select the video input for your DVD-Video player.
2. 2. To enjoy sound through your stereo system, turn on the system and select
the source input for the DVD-Video player, or: To enjoy DVD-Video with
multichannel (surround) sound, switch on the Home Theatre system and select
the source input for your DVD-Video player.
3. On the front of the DVD-Video player, press ON/OFF. The player display
will light up, and the OSD invites you to insert a disc.
INSERTING A DISC
1. Press Open/Close on the front of the player. The disc tray will open.
2. Put the disc you have selected into the tray, label side up.
Make sure it fits properly into the correct recess.
3. Gently push the tray, or press Open/Close, to close the tray.
• When Autoplay is ON (the factory setting), play starts.
Technical Support
Download from Www.Somanuals.com. All Manuals Search And Download.
|