Model DV6400 User Guide
Super Audio CD/DVD Player
CLASS 1
LASER PRODUCT
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
17. Power Lines – An outside antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
18. Overloading – Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
19. Object and Liquid Entry – Never push objects of any kind into this product
through openings as they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
This product was designed and manufactured to meet strict quality and
safety standards. There are, however, some installation and operation
precautions which you should be particularly aware of.
1. Read Instructions – All the safety and operating instructions should be read
before the product is operated.
2. Retain Instructions – The safety and operating instructions should be retained
for future reference.
3. Heed Warnings – All warnings on the product and in the operating instructions
should be adhered to.
4. Follow Instructions – All operating and use instructions should be followed.
Never spill liquid of any kind on the product.
5. Cleaning – Unplug this product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
20. Servicing – Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
21. Damage Requiring Service – Unplug this product from the wall outlet and
refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
6. Attachments – Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
7. Water and Moisture – Do not u se this product near water-for example, near
a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near
a swimming pool, and the like.
8. Accessories – Do not place this product on an unstable cart, stand, tripod,
bracket, or table. The product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold with the product.
Any mounting of the product should follow the manufacturer’s instructions,
and should use a mounting accessory recommended by the manufacturer.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as
an improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the product to its
normal operation.
e. If the product has been dropped or damaged in any way, and
9. CART – A product and cart combination should be
moved with care. Quick stops, excessive force, and
f.
When the product exhibits a distinct change in performance – this indicates
a need for service.
uneven surfaces may cause the product and cart
22. Replacement Parts - When replacement parts are required, be sure the
service technician has used replacement parts specified by the manufacturer
or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
23. Safety Check – Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to determine that the
product is in proper operating condition.
combination to overturn.
10. Ventilation – Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and toprotect it from overheating,
andthese openings must not beblocked or covered. The openings should never
be blocked byplacing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such asa bookcase
or rack unless proper ventilation is provided or themanufacturer’s instructions
have been adhered to.
24. Wall or Ceiling Mounting – The product should be mounted to a wall or
ceiling only as recommended by the manufacturer.
11. Power Sources – This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the
operating instructions.
25. Heat – The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
12. Grounding or Polarization – This
product may be equipped with a
polarized alternating-current line
FIGURE 1
AC POLARIZED PLUG
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
plug (a plug having one blade
wider than the other). This plug will fit into the power outlet only one way. This
is a safety feature. If you are unable to insert theplug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
ANTENNA
LEAD IN
WIRE
13. Power-Cord Protection – Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
Protective Attachment Plug – The product is equipped with an attachment plug
having overload protection. This is a safety feature. See Instruction Manual for
replacement or resetting of protective device. If replacement of the plug is
required, be sure the service technician has used a replacement plug specified by
the manufacturer that has the same overload protection as the original plug.
14.
ELECTRIC
SERVICE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
EQUIPMENT
GROUND CLAMPS
POWER SERVICE GROUNDING
Outdoor Antenna Grounding – If an outside antenna or cable system is connected
to the product, be sure the antenna or cable systemm is grounded so as to provide
some protection against voltage surges and built-up static charges. Article 810 of
the National Electrical Code, ANSI/NFPA 70, provides information with regard to
proper grounding of the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding conductors, location of
antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode. See Figure 1.
15.
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
16. Power-Cord Protection – Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme à la norme
NMB-003 du Canada.
EN
–
–
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
■
■
■
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . 3
DVD SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Display Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Audio Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Speaker Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Parental Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
PARENTAL LEVEL. . . . . . . . . . . . . . . . . . . . . . . . . . 27
IF YOU FORGET THE PASSWORD . . . . . . . . . . . . . 27
CONTROL LEVELS. . . . . . . . . . . . . . . . . . . . . . . . . 27
INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Symbols Used in this Manual. . . . . . . . . . . . . . . . . . . . . 5
■
ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Disc Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
■
■
■
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . . 30
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
■
■
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . 8
FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tour of the remote control . . . . . . . . . . . . . . . . . . . . . . . 9
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Displays During Operation . . . . . . . . . . . . . . . . . . . . . . 11
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . 11
Loading the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . 11
■
■
HOOK UPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Description - rear panel . . . . . . . . . . . . . . . . . . . . . . . . 12
Connection to an audio system . . . . . . . . . . . . . . . . . . 13
Connection to 5.1-channel Surround Sound system . . . 14
Connection to a TV (for video) . . . . . . . . . . . . . . . . . . . 15
PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
CANCELLING AND CALLING BACK
PBC FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
General Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
AUDIO-EX Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Disc Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
CALLING UP A MENU SCREEN DURING
PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . 17
Resume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Fast Forward / Reverse Search . . . . . . . . . . . . . . . . . . 17
Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . . 17
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . 18
Page Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Playing From a Desired Group. . . . . . . . . . . . . . . . . . . 18
Playback of the Bonus Group. . . . . . . . . . . . . . . . . . . . 18
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
REPEAT TITLE / CHAPTER. . . . . . . . . . . . . . . . . . . 19
REPEAT TRACK . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Program (CD/Super Audio CD/DVD-A). . . . . . . . . . . . . 19
Playback of All Groups. . . . . . . . . . . . . . . . . . . . . . . . . 20
Random Playback (CD/Super Audio CD/DVD-A) . . . . . 20
MP3 / JPEG / WMA Playback . . . . . . . . . . . . . . . . . . . 20
Slide Show Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
On-Screen Information. . . . . . . . . . . . . . . . . . . . . . . . . 21
Track Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Random Playback (MP3/JPEG/WMA) . . . . . . . . . . . . . 22
Program (MP3/JPEG/WMA). . . . . . . . . . . . . . . . . . . . . 22
Audio Language or Sound Mode . . . . . . . . . . . . . . . . . 22
Stereo Sound Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Changing the On-Screen Display . . . . . . . . . . . . . . . . . 23
Marker Setup Screen. . . . . . . . . . . . . . . . . . . . . . . . . . 24
Black Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
EN
–
–
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
The serial number of this product may be found on the back of the DVD player. No others have the
same serial number as yours. You should record the number and other vital information here and
retain this book as a permanent record of your purchase to aid identification in case of theft. Serial
numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
About Copyright
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineer-
ing or disassembly is prohibited.
Apparatus Claimas of U. S. Patent Nos, 4,631,603, 4,577,216, 4,819,098, and 4,907,093 licensed for limited
viewing uses only.
Supplied Accessories
Please check to make sure the following items are included with the main unit in the carton.
Remote
Operating
Instruction
Warranty Card
Audio
Video
cable
“AA” (R6P)
• • • • • • • •
• • • •
• • • • • •
control
1
• • • • • • • • •
• • • • • • • • •
1
for USA
Warranty Card
• • •
1
cable
1
1
• • • • • •
batteries
2
for Canada
1
Symbols Used in this Manual
The following symbols appear below in some headings and notes in this manual, with the following meanings.
:
:
Description refers to playback of DVD-Audio discs.
Description refers to playback of DVD-Video discs.
Description refers to playback of Audio CDs.
DVD-A
DVD-V
CD
:
SUPER
:
:
:
:
:
Description refers to playback of Super Audio CDs.
Description refers to playback of discs formatted with MP3.
Description refers to playback of Video CDs.
AUDIO CD
MP3
VCD
Description refers to viewing of JPEG discs.
JPEG
WMA
Description refers to playback of discs formatted with WMA.
Description refers to the items to be set in the QUICK mode.
:
QUICK
EN
–
–
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT THE DISCS
Playable Discs
The following discs can be played back on this
DVD player.
Disc Types
]
[
DVD-Audio
DVD-Audios are divided into several large sections called
“groups” and smaller sections called “tracks.” Numbers are
alloted to these sections. These numbers are called “group
numbers” and “track numbers.”
Usable
discs
Recorded
signals
Mark (logo)
Disc Size
Example
Group 1
Group 2
DVD-Audio
Track 1
Track 2
Track 3
Track 4
Track 1
Track 2
12 cm
DVD-Video
(NOTE 1)
Digital video
(MPEG2)
DVD-R
DVD-RW
(NOTE 2)
8 cm
[
]
DVD-Video
Data on a DVD is divided into sections called "titles," and
then into subsections called "chapters," each of which is
given a title or chapter number. Playback conditions are
preset on some DVD-Video discs, and these playback
conditions take priority over user operations on this player.
If a function you selected does not run as desired, refer to
Digital audio
MP3
WMA (NOTE 4)
Digital picture
(JPEG)
12 cm
8 cm
CD
CD-R
CD-RW
(NOTE 3)
the manual accompanying the disc
.
Super Audio
CD
Digital audio
12 cm
12 cm
Example
Title 1
Title 2
Sound
and
Pictures
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
Video
CD
DIGITAL VIDEO
8 cm
(Singles)
[
]
Audio CD, Video CD, Super Audio CD
Picture CD
JPEG
12 cm
Data on an Audio CD, a Super Audio CD, or a Video CD is
divided into sections called “tracks,” each of which is given a
track number.
NOTE 1: Some DVD-Video discs do not operate as described in this
manual due to the intentions of the discs’ producers.
NOTE 2: Playing DVD-R and DVD-RW discs
Example
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
DVD-R and DVD-RW discs on a DVD recorder can be played.
Discs that have not be finalized cannot be played.
Depending on the disc’s recording status, the disc may not be
accepted or may not be played normally (the picture or sound
may be not be smooth, etc.).
NOTE 3: Some of CD-R/CD-RW discs may be incompartible because
of “scratch and stain of disc”, “Recording condition”, and
“Characteristic of Recorder”.
NOTE 4:
Windows Media and the Windows logo are
trademarks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
ABOUT THE PBC FUNCTION OF VIDEO CD
This unit conforms to ver.1.1 and ver.2.0 of Video CD stan-
dard, with PBC function.
Ver.1.1 (without PBC function): You can enjoy playback picture
This player conforms to the NTSC color system. You as well as music CD.
cannot play discs recorded in other color systems such
as PAL.
Ver.2.0 (with PBC function): While using a Video CD with PBC
function, “PBC” appears on the screen and the display.
¡Some discs include region codes as shown below.
What is PBC? “PBC” stands for the Playback Control.You
can play interactive software using menu screens. Refer to
instructions in the Video CD.
NOTE:
When playing Video CDs with PBC function, some operations
(e.g., select and repeat tracks) cannot be performed unless the
function is cancelled temporarily (refer to page 16).
¡The number inside the symbol refers to a region of
the world, and a disc encoded in a specific region for-
mat can only be played back on DVD players with the
same region code.
[
]
MP3, JPEG, WMA
The following discs cannot be played back on this
DVD player.
Data on a MP3 is divided into sections called "groups," and
then into subsections called "tracks," each of which is given an
album or track number.
¡DVD with region codes other than 1 or ALL.
¡DVD-ROM
Example
¡DVD-RAM (Never play back, otherwise malfunc-
tion may result.)
Group 1
Group 2
Track 1
Track 2
Track 3
Track 4
Track 1
Track 2
¡CD-ROM
¡VSD
¡CDV (Only plays back the audio part.)
¡CD-G (Only plays back the sound.)
¡CD-R/CD-RW (Only plays back the discs which
Audio CD/MP3/JPEG/WMA is recorded.)
¡CD-I (Never play back, otherwise malfunction may
result.)
CAUTION:
¡
Use caution not to pinch your finger in the disc slot.
¡Photo CD (Never play back, otherwise malfunc-
tion may result.)
¡Be sure to remove a disc and unplug the AC power cord
from the outlet before carrying the DVD player.
Any other discs without compatibility indications.
EN
–
–
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
¡Analog 5.1-channel Dolby and DTS surround out- ¡Search
put
Group search: Search for the group designated by
This player is equipped with analog 5.1-channel
Dolby and DTS surround audio out jacks for play-
back.
user is possible.
Page search: Search for the page designated by
user is possible.
Chapter search:Search for the chapter designated by
user is possible.
¡Progressive Scan system
Unlike conventional interlace scanning, the progres-
sive scan system provides less flickering and images
in higher resolution than that of traditional television
signals.
Title search: Search for the title designated by user
is possible.
Track search: Search for the track designated by
user is possible.
¡Still/fast/slow/step playback
Time search: Search for the time designated by
user is possible.
Various playback modes are available including still
pictures, fast forward/reverse, slow motion and step
frames.
¡Repeat
Chapter:
Repeated playback of the chapter of
the disc being played is possible.
Repeated playback of the title of the
disc being played is possible.
Repeated playback of the track of the
disc being played is possible.
Repeated playback is possible.
(exclude DVD-Video)
¡Random playback for Audio CD, MP3, Super
Audio CD, JPEG, DVD-Audio, and WMA
This player can shuffle the order of tracks to play
them in random order.
¡Program playback for Audio CD, MP3, Super
Audio CD, JPEG, DVD-Audio, and WMA
You can program the order of tracks to play them in
any desired order.
¡DVD menus in a desired language
You can display DVD menus in a desired language, if
available on a DVD.
¡Auto standby
When the screen saver program is activated for 35
minutes, the power is automatically turned off.
¡Subtitles in a desired language
You can select a desired language for the display
subtitles, if that language is available on a disc.
¡Selecting a camera angle
You can select the desired camera angle, if a disc
contains sequences recorded from different angles.
¡Choices for audio language and sound mode
You can select the desired audio language and
sound mode, if different languages and modes are
available on a disc.
¡Parental lock
You can set the control level to limit playback of discs
which may not be suitable for children.
Title:
Track:
ALL:
A-B:
The part between A and B designated
by user is possible.
Group:
Repeated playback of the folder of
the MP3/JPEG/WMA/DVD-Audio disc
being played is possible.
¡Zoom
2-time or 4-time magnified screen can be displayed.
¡Marker
The part designated by user can be called back.
¡Resume Play
User can resume to playback from the part at which
the play was stopped even if the power turn off.
¡Component Video Out Jacks
Jacks located on the back of the DVD Player which
are used to send high-quality video to a TV via
Component Video In Jacks.
¡Bit rate indication
¡DRC (Dynamic range control)
You can control the range of sound volume.
¡Automatic detection of discs
¡Displaying a JPEG picture
This player automatically detects if a loaded disc is
DVD-Video, DVD-Audio, Super Audio CD, Audio CD,
MP3, JPEG, or WMA.
Kodak Picture CDs can be played. Still images stored
in JPEG format on CD-R/RW can also be played.
¡Reproducing WMA data
You can enjoy WMA files which are recorded on
CD-R/RW.
¡Playing an MP3 disc
You can enjoy MP3 files which are recorded on CD-
R/RW.
¡Direct Search
You can search the desired title, chapter, and track
with numeric button during playback or in stop mode.
¡On-screen display
Information about the current operation can be dis-
played on a TV screen, allowing you to confirm the
currently active functions (such as program play-
back), on the TV screen using the remote control.
¡AUDIO-EX Mode
You can enjoy higher quality audio by stopping the
video signal and display.
“Kodak Picture CD COMPATIBLE” is trademark of
Eastman Kodak Company.
“WMA” (Windows Media Audio) is a new audio
codec developed by Microsoft® in the United
States of America.
EN
–
–
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
FRONT PANEL
3
1
2
5
6 7
4
AUDIO
EX.
11
13
14
32 31
30
10 8
12
REMOTE CONTROL
1. POWER Button [page 16]
2. Disc loading tray
3. PLAY Button [page 16]
4. STOP Button [page 16]
5. PAUSE Button [page 16]
21
12
26
1
27
24
19
16
15
6. Cursor Buttons [page 16]
Use when making settings while watching the display on
a TV screen.
7. MENU Button [page 16]
8. ENTER Button [page 16]
9. SETUP Button [page 25]
10. G (SKIP UP/FWD) Button [page 18]
Plays back from the beginning of the next chapter or
track. Hold down to fast forward playback.
11. H (SKIP DOWN/REV) Button [page 18]
Plays back from the beginning of the current chapter or
track. Hold down to fast reverse playback.
12. OPEN/CLOSE Button [page 16]
13. AUDIO EX. Button [page 16]
28
10
18
5
22
3
11
23
4
14. Display, Remote Sensor Window
15. A-B REPEAT Button [page 19]
16. REPEAT Button [page 19]
7
9
29
6
17. ZOOM Button [page 17]
18. CLEAR Button [page 18]
19. ANGLE Button [page 23]
Press to change the camera angle to see the sequence
being played back from a different angle.
20. RETURN Button [page 16]
17
25
20
8
21. SEARCH MODE Button [page 18]
22. h (FR SEARCH) Button [page 17]
23. g (FF SEARCH) Button [page 17]
24. SUBTITLE Button [page 23]
Press to select a desired subtitle language.
25. TOP MENU Button [page 16]
26. DISPLAY Button [page 21]
27. AUDIO Button [page 22]
Press to select a desired audio language or sound mode.
28. Numeric Buttons [page 18]
29. MODE Button [page 19]
30. AUDIO EX. Indicator
This indicator lights when the AUDIO EX. button is ON.
31. SUPER AUDIO CD Indicator
The buttons with circled numbers can only be
operated with the remote control.
This indicator lights when playing a Super Audio CD.
32. STANDBY Indicator
This indicator lights when the DVD player turns off.
EN
–
–
8
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Tour of the remote control
Buttons on remote control work in different ways for DVD, VCD, and CD :
Refer to the following table for correct use.
DVD
VCD
CD
POWER
• Press this to switch the power • Press this to switch the power
•
Press this to switch the power
between on and standby.
between on and standby.
between on and standby.
A-B REPEAT Button
REPEAT Button
•
•
Marks a segment to repeat
between A and B.
• Marks a segment to repeat
between A and B.
• Marks a segment to repeat
between A and B.
Allows you to repeat play a
Group (For DVD-Audio), Title,
or Chapter.
• Allows you to repeat play a
Track or Disc.
• Allows you to repeat play a
Track or Disc.
•
Allows you to program a specific
order or random playback.
• To set black level on/off.
• To activate the 3D sound
(Virtual surround system).
MODE Button
•
•
To set black level on/off.
To activate the 3D sound (Virtual
surround system).
• To activate the 3D sound
(virtual surround system).
ZOOM Button
ANGLE Button
• To magnify part of picture
(x2).
• To magnify part of picture
(x2/x4).
•
Accesses various camera angles
on a disc.
SUBTITLE Button
AUDIO Button
• Accesses various subtitles on
a disc.
•
To select STEREO, L-CH or R-CH.
•
Accesses various audio functions
on a disc.
•
•
To select STEREO, L-CH or R-CH.
Displays the current disc mode.
DISPLAY Button
• Displays the current disc
mode.
• Displays the current disc mode.
SEARCH MODE Button
• To search track or time.
• To rapidly return to a location
of disc.
• To search chapter, title, or time.
• To rapidly return to a location
of disc.
• To search track or time.
• To rapidly return to a location
of disc.
OPEN/CLOSE Button
NUMERIC Buttons
• To open or close the disc tray.
• To open or close the disc tray.
• To open or close the disc tray.
• To select track directly.
• To select chapter directly.
• To select track directly.
CLEAR Button
• Clear the markers.
• Removes status No. in
program input.
• Clear the markers.
• Clear the markers.
EN
–
–
9
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Tour of the remote control
DVD
• Brings up the Menu on a disc.
VCD
CD
MENU Button
TOP MENU Button
•
Brings up the Top Menu on a disc.
ENTER, CURSOR Buttons
•
Moves the cursor and determines
its position.
•
Moves the cursor and determines
its position.
•
Moves the cursor and determines
its position.
RETURN Button
• Returns to a previous menu.
• Returns to a previous menu.
SETUP Button
SKIP Buttons
•
Brings up the DVD player’s Setup menu.
•
Brings up the DVD player’s Setup menu.
•
Brings up the DVD player’s Setup menu.
• To skip Chapters
• To skip Tracks (For DVD-Audio).
• To skip Tracks.
• To skip Tracks.
SEARCH Buttons
• Allows you to search forward/backward
through a disc (x2. x8. x30).
•
Allows you to search forward/backward
through a disc (x2. x8. x50. x100).
•
Allows you to search forward/backward
through a disc (x16).
STOP Button
PLAY Button
PAUSE Button
• To stop playback.
• To stop playback.
• To stop playback.
• Begin disc play.
• Pause disc play.
• Begin disc play.
• Begin disc play.
•
•
Pause disc play.
Advances playback one frame at a time.
•
•
Pause disc play.
Advances playback one frame at a time.
EN
–
–
10
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Display
Stays on when repeat chapter function is on.
Stays on when repeat track function is on.
Stays on when repeat
title function is on.
Stays on when
the repeat function is on.
Lights up when a DVD is
inserted into the tray.
Stays on when
the A-B repeat
function is on.
CD:
Lights up when a CD is inserted
into the tray. (The SUPER AUDIO CD
Indicator also lights up when playing a
Stays on when the inserted
disc is being played back.
Lights up when a
playback control
is activated.
Super Audio CD.)
VCD:
Lights up when the
inserted disc comes
to a pause.
Lights up when a Video CD is
inserted into the tray.
Displays how long a current title or track has been
played back. When a chapter or track has switched,
the number of a new title, chapter or track is displayed.
Displays During Operation
Power on
Loading the Batteries
1. Open the battery compartment cover.
No disc inserted
Tray open
2. Insert two “AA” (R6P) batteries, with each
one oriented correctly.
Tray closed
3. Close the cover.
Loading the Disc
Power off
NOTES
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
Using the remote control
Cautions On Batteries
• Use “AA” (R6P) batteries in this remote control unit.
• Replace the batteries with new ones approximately
once a year, though this depends on the frequency
with which the remote control unit is used.
• If the remote control unit does not operate from
close to the main unit, replace the batteries with
new ones, even if less then a year has passed.
• The included battery is only for verifying operation.
Replace it with a new battery as soon as possible.
• When inserting the batteries, be careful to do so in
Keep in mind the following when using the remote
control:
• Make sure that there is no obstacle between the
remote and the remote sensor on the unit.
• Use within the operating range and angle, as shown.
the proper direction, following the
and
marks
in the remote control unit’s battery compartment.
• To prevent damage or battery fluid leakage:
• Do not use a new battery with an old one.
• Do not use two different types of batteries.
• Do not short-circuit, disassemble, heat or dispose
of batteries in flames.
• Remove the batteries when not planning to use the
remote control unit for a long period of time.
• If the batteries should leak, carefully wipe off the
fluid from the inside of the battery compartment,
then insert new batteries.
EN
–
–
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOK UPS
Description - rear panel
2
1
3
4
5
6
7
1. DIGITAL OUT JACKS
Use either an optical or coaxial digital cable to connect to an AV amplifier with a built-in decoder (AV control center).
2. 2ch AUDIO OUT JACKS
Connect to the Audio input jacks of A/V-compatible TV or wide screen TV, Stereo system.
(The sound of Super Audio CD discs is not output.)
3. VIDEO OUT JACK
Use a video cable to connect one of the jack to Video input on your A/V-compatible TV or wide screen TV, Stereo system.
4. COMPONENT VIDEO OUT JACKS
B
B
R
R
Use these jacks if you have a TV with Component Video in jacks. These jacks provide C /P , C /P and Y video. Along
with S-Video, Component Video provides the best picture quality.
5. S-VIDEO OUT JACK
Use the S-Video cable to connect this jack to the S-Video jack on your A/V-compatible TV or wide screen TV for a higher
quality picture.
6. PROGRESSIVE switch
7. 5.1ch AUDIO OUT JACKS
Use the speaker cables to connect these jacks to the 5.1ch AUDIO IN jacks on your AV amplifier with 5.1-channel input
terminals.
Selecting Progressive Scan (480p or Interlaced 480i) Playback
¡If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output jacks of the DVD
player and set the Progressive switch on the back of the DVD player to “PROGRESSIVE”. Next, set your TV to the progres-
sive scan mode.
If your TV is not compatible with progressive scan, keep the Progressive switch to “INTERLACE”.
¡Use a commercially available adaptor if the video input jacks of your TVs or monitors are the BNC type.
What is Progressive Scanning?
¡Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution
than that of traditional (480i) television signals.
NOTE
• When the Progressive switch is set to "PROGRESSIVE", no video signal will be output from the VIDEO OUT or S-VIDEO
OUT jack.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks
of Dolby Laboratories.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674,
5,974,380, 5,978,762 and other world-wide patents issued and pending. “DTS” and “DTS Digital
Surround” are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital
Theater Systems, Inc. All Rights Reserved.
EN
–
–
12
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOK UPS
The following show examples of connections commonly used to connect the DVD player either TV and other
components.
If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround or DTS surround format, the
DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL AUDIO OUT
jacks. 5.1 channel Dolby Digital Surround sound and DTS sound can also be output from the 5.1 CH OUTPUT
jacks. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic
ambience with powerful and high-quality surround sound of a professional standard, which can be heard in
movie theaters. Use an audio coaxial or optical digital cable (not included) for the audio connections. Use audio
cables (commercially available ) for the 5.1 CH audio connection.
Notes
¡Be sure to turn off the power to all components in the system before connecting another component.
¡Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the
DVD player.
Connection to an audio system
Method 1
Method 2
Dolby Digital decoder
or
Stereo system
DTS decoder
Digital Audio Input
Jacks
Audio Input Jacks
AUDIO
Analog Audio Out
Digital Audio Out
DVD
• Method 1 DVD Player + Stereo system
• Method 2 DVD Player + Dolby Digital decoder or DTS decoder
NOTES
• If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to ON for audio output in the setup
mode. (See page 26)
• If output DTS audio, connect to a DTS decoder, and set DTS to “DTS” for audio output in the setup mode. (See page 26)
•
Unless connected to a Dolby Digital decoder or a DTS decoder, set Dolby Digital to “OFF”, or DTS to “PCM” for audio output in
the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
(See page 26)
• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or
DAT deck.
•
Set Dolby Digital “OFF” and set DTS to “PCM” for audio output in the setup mode for method 1 only. Playing a DVD using incor-
rect settings may generate noise distortion, and may also damage the speakers. (Refer to page 26 to set Dolby Digital “ON”
and to set DTS to “DTS”)
•
•
Super Audio CD sound is not output from the 2ch AUDIO OUT jacks.
Super Audio CD sound is not output as digital sound.
Optical cable (not supplied)
• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diame-
ter of 15 cm or more when storing them.
• Use a cable which is 3m or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.
EN
–
–
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOK UPS
Connection to 5.1-channel Surround Sound system
Analog 5.1-channel audio signals can be output from the DVD player.
The multichannel audio signals recorded in packed PCM can be played when an AV amplifier equipped with
analog 5.1-channel audio inputs is connected.
Center speaker
Method 1
Front speaker
(left)
Front speaker
(right)
Subwoofer
Surround
speaker
(right)
Surround
speaker
(left)
AV amplifier
with
5.1-channel input terminals
AUDIO
To 5.1ch Audio IN
Jacks
DVD
5.1ch Audio OUT
EN
–
–
14
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOK UPS
Connection to a TV (for video)
Method 1
Method 2
Method 3
Basic Audio
Good picture
Better picture
Best picture
COMPONENT
VIDEO IN
R
L
VIDEO IN
S-VIDEO IN
CR
Y
CB
TV
PR
Y
PB
Audio cable
Video cable
S-Video
cable
Component Video
cable
DVD
Analog Audio out
Video out
S-Video out
Component Video out
• Method 1 DVD Player + TV with Video Input Jack
• Method 2 DVD Player + TV with S-Video Input Jack
• Method 3 DVD Player + TV with Component Video Jacks
NOTES
• If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output jacks of the DVD
player. Refer to page 12.
• Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the
copy protection system.
• S-Video output connector
The video signals are divided into color (C) and brightness (Y) signals, achieving a clearer picture.
If the TV is equipped with a S-Video input connector, we recommend connecting it to the this product’s S-Video output con-
nector using a commercially available S-Video connection cord.
• Super Audio CD sound is not output from the 2ch AUDIO OUT jacks.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD
player to your TV’s 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator, not includ-
ed. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and
then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna termi-
nal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that
cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator
(usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna
terminal as described above.
NOTE
• The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal
through an RF Modulator.
EN
–
–
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
Basic Playback
NOTES:
• In SETUP menu, the AUDIO-EX mode is not available.
SUPER
AUDIO CD
•
The AUDIO-EX mode will be released when you press
the buttons listed below.
DVD-A DVD-V VCD
CD
Getting started
OPEN/CLOSE button (on both the remote and the front
panel), SETUP, POWER or DISPLAY button (on the
remote), ON/STANDBY or AUDIO EX. button (on the
front panel).
•
•
Turn on the power of the TV, amplifier and any other com-
ponents which are connected to the DVD.
Make sure the TV and audio receiver (commercially avail-
able) are set to the correct channel.
• AUDIO EX. button does not function during displaying
SETUP menu.
1
2
3
Press the POWER button.
• “P-ON” will appear briefly on the display panel.
Press the OPEN/CLOSE button to open disc load-
ing tray.
Pause
Place the disc in the tray, with the
label facing up.
DVD-A DVD-V VCD
CD
SUPER
MP3 WMA
AUDIO CD
1
2
During playback, press the
PAUSE button.
F
4
Press the PLAY button.
• Playback will pause and sound
will be muted.
To continue playback, press the
PLAY button.
• The tray will close automatically, and playback will then
start from the first chapter or track of the disc. If the
playback does not start automatically, press the PLAY
button.
• When you playback the DVD with a title menu, it may
appear on the screen. In this case, refer to “TITLE
MENU”.
5
Press the STOP button to stop playback.
Disc Menus
NOTES:
• A “prohibited icon” may appear at
DVD-V
the top-right on the TV screen
1
Press the MENU button.
during operation, warning that a
prohibited operation has been
• The DVD main menu will appear.
If the feature is not available,
appear on the TV screen.
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
Press the cursor buttons ( L / K / B / s ) to select
an item, and the ENTER button to confirm selec-
tion.
encountered by the DVD player or
2
3
symbol may
the disc.
• With DVDs that use some titles
for playback program signals, playback may start from
the second title, or it may skip these titles.
• During the playback of two layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• The operation may vary when you playback DVDs with
disc menu or Video CDs with PBC. Refer to the manual
accompanying the disc for details.
4
Title Menu
CANCELLING AND CALLING BACK PBC FUNCTION
DVD-A DVD-V
Press the TOP MENU button.
VCD
1
1
2
3
Insert a Video CD.
• The title menu will appear.
If the feature is not available,
appear on the TV screen.
Press the STOP button.
2
3
symbol may
Press the numeric buttons to enter the desired
Track number.
Press the cursor buttons ( L / K / B / s ) to select
an item, and the ENTER button to confirm selec-
tion.
• PBC function is now cancelled and the playback of the
Video CD will start.
4
To call back PBC function, press the STOP button
twice, and then press the PLAY button.
• Title menu will appear on the display.
• Playback will begin at the selected Title.
VCD
1
2
When playing a Video CD with PBC func-
tion, the title menu will appear automatically.
Press the numeric buttons to select the desired
title.
General Features
DVD may contain menus to navigate the disc and access spe-
cial features. Press the appropriate numerical key or use the
cursor buttons ( L / K / B / s ) to highlight your selection in
the DVD main menu and press the ENTER button to confirm.
NOTE:
• Playback will begin at the selected title.
Press the RETURN button to go back to the title
menu.
3
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
CALLING UP A MENU SCREEN DURING PLAYBACK
DVD-V
AUDIO-EX Mode
•
•
Press the MENU button to call up the DVD main menu.
Press the TOP MENU button to call up the title menu.
1
Press the AUDIO EX. button on the front panel to
output analog audio signals only (No video signal will
be output, and the display will be turned off.).
NOTE:
• Contents of menus and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.
•
•
The AUDIO EX. indicator will light up.
The higher quality sound will be achieved.
EN
–
–
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
Step by Step Playback
Slow Forward / Slow Reverse
DVD-A
DVD-A
Only Moving
DVD-V VCD
Only Moving
Picture
DVD-V VCD
Picture
1
2
During playback, press the
1
During playback, press the
PAUSE button.
• Playback will pause and sound
will be muted.
F
PAUSE button.
Press the g or h button.
•
Slow motion playback will begin
and sound will be muted.
D
Button
1/16
1/8
3
Press the g or h button
repeatedly to select the
required speed: 1/16, 1/8, 1/2
2
3
The disc advances by one frame each time the
PAUSE button is pressed.
To exit step by step playback, press the PLAY but-
ton.
of the normal playback.
• If you are using g/G or
H/E on the front panel, press
and hold it for more than 1.5 sec
(the longer you hold it, the faster
the speed will be). When you
reach the desired speed,
1/2
Resume
release the button.
SUPER
AUDIO CD
4
To return to normal playback, press the PLAY button.
DVD-A DVD-V
CD
VCD
NOTE:
• Only Slow Forward is available when playing Video CD.
Forward speed can be selected from 1/16, 1/8, or 1/2.
1
2
During playback, press the
STOP button.
Resume ON
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
• Resume message will appear on
the TV screen.
Zoom
DVD-V VCD
The Zoom function allows you to enlarge
Press the PLAY button, playback will resume from
the point at which playback was stopped.
the video image and to pan through the enlarged image.
1
Press the ZOOM button during playback.
• Playback will continue.
• To cancel resume, press the STOP button twice.
NOTES:
2
Press the ZOOM button repeatedly to select the
• The resume playback takes a little longer to take place
required zoom factor: x2, x4 or OFF.
• Only x2 zoom is available on Video CDs.
compared to the normal playback.
• Some Video CDs with PBC function resume playback
from the beginning of the track.
• The resume information stays on even when the power
is switched off.
x2
x4
Fast Forward / Reverse Search
SUPER
AUDIO CD
DVD-A DVD-V VCD
CD
MP3 WMA
3
Use the cursor buttons ( L / K / B / s ) to move
the zoomed picture across the screen.
1
During playback, press the g or h button
repeatedly to select the required forward or reverse
speed: x2, x8, x50, x100.
• If you are using g/G or H/E on the front panel,
press and hold it for more than 1.5 sec (the longer you
hold it, the faster the speed will be). When you reach
the desired speed, release the button.
2
8
50
100
• For Video CDs, the playback speed is x2, x8 or x30.
• For Audio CDs, the speed is fixed at x16.
• For Super Audio CDs, the speed is fixed at x16.
• For MP3 and WMA the speed is fixed at x8.
To return to normal playback, press the PLAY but-
ton.
4
To exit zoom mode, press the ZOOM button to
2
OFF.
NOTES:
• Zooming function does not work while disc menu is
shown.
• x4 zoom is not available on some discs.
EN
–
–
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
Track
Page Selection
SUPER
DVD-A CD
VCD
DVD-A
AUDIO CD
Some DVD Audio discs that include still images are provided
with a selection of images you can choose from.
MP3 WMA
There are three ways to begin playback
1
Press the MODE button 3 times
1/12
on a DVD-Audio, Audio CD, Super Audio CD, Video CD, MP3
or WMA disc at a specific Track.
during playback.
By using the Numeric buttons
(Except for DVD-Audio)
2
3
Press the ENTER button.
1
Press the numeric buttons to enter the desired
Track number.
• Playback will start at the selected track.
• It is in the ready state for you to enter the page number.
Press the numeric buttons to select the image of
your choice.
• For single digit tracks (1-9), press a single number (eg.
track 3, press 3).
NOTE:
•
To play track 26, press +10, 2, 6 on the numerical button.
• Press the MODE button twice when 5.1CH is selected as
the audio channel in the audio setting of the setup menu.
By using the SEARCH MODE button
(DVD-Audio/Audio CD/Super Audio CD/Video CD)
Playing From a Desired Group
1
Press the SEARCH MODE button.
__/ 15
DVD-A
• The track search display appears.
1
2
During playback or in stop mode,
press the SEARCH MODE but-
ton twice.
Press the numeric buttons to
select a group.
• The Group will be located and
playback will start.
1/12
2
Within 30 seconds, select a desired track number using
the numeric buttons. For single digits press “0” first.
• Playback will start at the selected track.
NOTE:
Playback of the Bonus Group
DVD-A
• Playback must first be stopped (in resume mode) when
selecting tracks from DVD-Audio discs.
By using the SKIP buttons
H
G
Some discs are recorded with Bonus Group that can be play-
backed by entering a password. Refer to the disc jackets.
1
During playback, press the
G button to move to the next
SKIP
track. Press it repeatedly to skip subsequent tracks. Press the
H button to go back to the beginning of the current track.
In stop mode, press the SEARCH MODE button to
open the group search screen.
SKIP
Press it repeatedly to go to the previous tracks
Track number will appear briefly on the DVD display panel.
2
.
Press the numeric buttons to
DVD-AUDIO
select a bonus group number.
BONUS GROUP
4-digit password.
•
• If any SKIP button is pressed while the playback is
paused, the playback will be paused again after skip-
ping to the next track.
• The password popup window
appears.
Please enter
a
NOTE:
• The SKIP
H
G buttons are not available when play-
3
Press the numeric buttons to enter the 4-digit password.
• When the correct password is entered, playback starts
from the top of the bonus group.
back is stopped.
Title / Chapter Search
NOTES:
•
In some cases the password window is displayed on the menu
DVD-V
screen. Follow the instructions given on the screen.
Once the password is entered, it can be playbacked repeatedly
until the disc is removed from the disc tray.
•
By using the SEARCH MODE buttons
1
Press the SEARCH MODE button
once for the Chapter search,
twice for the Title search during
playback.
/2
Time Search
SUPER
AUDIO CD
DVD-A DVD-V
CD
VCD
1
2
During playback, press the SEARCH MODE button
three times (CD, Super Audio CD, VCD: twice) to
display the Time Search on the TV screen.
2
Enter the desired chapter/title
number with the numeric buttons.
Within 30 seconds, enter a
TOTAL
1 : 23 : 45
:
:
desired disc time with the
By using the SKIP buttons
H
G
numeric buttons.
• Playback will start at the specified
time.
During playback, press the
G button to move to the next
SKIP
chapter. Press it repeatedly to skip subsequent chapters. Press
the
H button to go back to the beginning of the current
3
SKIP
chapter. Press it repeatedly to go to the previous chapter
Press the CLEAR button to
.
erase the incorrect input.
EN
–
–
18
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
NOTES:
Repeat
•
The A-B repeat section can only be set within the current
title (for DVDs), or current track (for Audio CDs).
A-B Repeat is not available with some scenes in DVD.
To cancel the A point which was set, press the CLEAR button.
A-B Repeat playback does not function during title, chap-
ter, track or all repeat playback.
The REPEAT button is available only during playback.
•
•
•
REPEAT TITLE / CHAPTER
DVD-V
To activate the repeat function, press the
REPEAT button during playback.
Program
•
The repeat mode changes as described below every time
you press the button.
SUPER
CD
AUDIO CD
You may determine the order in which tracks will play.
OFF
CHAPTER
TITLE
1
In stop mode, press the MODE button.
(repeat off)
(current chapter repeat) (current title repeat)
• The PROGRAM screen will appear.
2
Press the cursor buttons
(▲ or ▼) to select a track, then
PROGRAM
TOTAL
press the ENTER button.
NOTES:
• Press the CLEAR button to erase
the most recently entered pro-
gram.
•
•
Repeat Title/Chapter is not available with some scenes.
he REPEAT setting will be cleared when moving to other
title or chapter.
ENTER
PLAY
CLEAR
3
Press the PLAY button to play
the programmed tracks.
REPEAT TRACK
SUPER
NOTES:
CD
VCD
AUDIO CD
•
While the program is being played back, the STOP button works as
follows.
To activate the repeat function, press the REPEAT button during
•
Press the STOP button once and then the PLAY button again,
playback will restart from the point where the STOP button
was pressed. (Program continued)
playback.
•
The repeat mode changes as described below every time
you press the button.
•
Press the STOP button twice and then the PLAY button again,
playback will restart from the track in the usual way. (Program
cleared)
OFF
(repeat off)
TRACK
(current track repeat)
ALL
•
•
Up to 99 programs can be entered.
(entire disc repeat)
I
f you wish to repeat the current track in the program, press
the REPEAT button repeatedly until
TRACK appears dur-
ing playback. If you wish to repeat the entire program press
NOTES:
the REPEAT button repeatedly until
ALL appears during
•
•
•
The REPEAT setting will be cleared when moving to other track.
playback.
Repeat playback does not function during A-B repeat playback.
Repeat playback is not available when playing the Video CD
with PBC function.
•
Refer to page 22 for program playback of MP3, WMA, and
JPEG.
DVD-A
DVD-A MP3 JPEG WMA
1
2
In stop mode, press the MODE
PROGRAM
button twice.
OFF
(repeat off)
TRACK
GROUP
ALL
• The group selection screen will
appear.
(current track
repeat)
(current folder
repeat)
(entire disc
repeat)
ENTER
PLAY
CLEAR
Press the cursor buttons (▲ or ▼) to select a
A-B REPEAT
group, then press the ENTER button.
• The track selection screen will be displayed.
SUPER
AUDIO CD
DVD-A DVD-V
CD
VCD
• It takes approximately five seconds until the track
selection screen appears.
1
Press the A-B REPEAT button
at your
A -
3
4
Press the cursor buttons (▲ or ▼) to select a
track, then press the ENTER button.
• Press the s button to go back to the group selection
screen from the track selection screen.
Press the PLAY button to play the programmed
tracks.
chosen starting point.
•
•
A- appears briefly on the TV
screen.
2
3
NOTES:
A - B
Press the A-B REPEAT button
again at your chosen end point.
•
•
It may take time for all the respective track times to be displayed.
The programmed content is retained until the power is turned
off or the disc tray is opened.
If eight or more tracks have been set in a program, the user
can switch the right part of the screen with the SKIP button
H or G.
A-B appears briefly on the TV
screen, and the repeat sequence
begins.
•
OFF
To exit the sequence, press the
A-B REPEAT button.
EN
–
–
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
Playback of All Groups
Information on MP3, JPEG and WMA discs
• A file with an extension of “.mp3 (MP3)” is called an “MP3 file”.
• A file with an extension of “.jpg (JPG)” or “.jpeg (JPEG)” is
called a “JPEG file”.
The DVD player can run an image file conforming to the
Exif* specification.
* This is a file format, Exchangeable Image File format
established by Japanese Electronic Industry Development
Association (JEIDA).
DVD-A
1
2
In stop mode, press the MODE
button.
ALL GROUP
DVD-AUDIO
TOTAL 2:05:55
•
ALL GROUP screen appears.
All Group Playback
--no indication--
PLAY
• A file with an extension of “.wma (WMA)” is called a
“WMA file”.
Press the PLAY button to play.
• Files whose extension is other than “.mp3 (MP3)”, “.jpg
(JPG)”, “.jpeg (JPEG)” and “.wma (WMA)” will not be list-
ed in the MP3, JPEG, or WMA menu.
Random Playback
• If the file is not recorded in MP3, JPEG or WMA format, noise
may be produced even if the file extension is either of “.mp3
(MP3)”, “.jpg (JPG)”, “.jpeg (JPEG)” and “.wma (WMA)”.
SUPER
AUDIO CD
CD
This shuffles the playing order of tracks instead of playback
in the original sequence.
1
2
In stop mode, press the MODE
RANDOM
CD [AUDIO]
TOTAL 0:45:55
When a disc with MP3,JPEG or WMA files is inserted in the
DVD player, the track menu will appear on the TV screen,
and number of tracks is displayed on the front panel.
button twice.
•
RANDOM screen appears
.
RANDOM PROGRAM
--no indication--
PLAY
1
Place the disc in the tray with the label facing up.
Press the PLAY button to start
For discs on which MP3, JPEG or WMA tracks are
recorded:
random playback.
NOTES:
•
If you wish to repeat the current track in the random selection,
press the REPEAT button repeatedly until TRACK appears
• An MP3, JPEG or WMA track menu screen appears.
• A symbol of “ ” is shown on the top of the group name.
• A symbol of “ ” is shown on the top of MP3 files.
• A symbol of “ ” is shown on the top of JPEG files.
• A symbol of “ ” is shown on the top of WMA files.
• If the picture extends beyond the scope of screen, a down
arrow “L” appears, indicating that the user can view anoth-
er part of the picture on the next page. If an up arrow “K”
appears, it indicates that the user can view another part
on the previous page. The current page number and the
number of total pages are shown on the right of the down
arrow “L”.
during playback. If you wish to repeat the entire random selec-
tion press the REPEAT button repeatedly until
ALL
appears during playback.
•
Refer to page 22 for random playback of MP3, WMA, and
JPEG.
DVD-A
1
In stop mode, press the MODE
RANDOM
button three times.
•
The group selection screen will
appear.
ALL
1
2
1:02:25
1:03:30
• The system can recognize up to 255 groups (or folders)
and up to 256 tracks. (This applies to the case where
mixed MP3, JPEG and WMA files are recorded.)
• If no MP3, JPEG or WMA files are found in the group, the
group is not displayed.
• The DVD player can reproduce data recorded as per ISO
9660 Level 1, Level 2 or Joliet on the disc.
• It can also run a disk on which data is recorded in a multi-
session.
• For more details of recording systems, see the instruction
manual for the CD-R / CD-RW drive or the writing software.
PLAY
ALL
2
3
Press the cursor buttons (▲
or ▼) to select the desired
group to playback randomly,
then press the ENTER button.
RANDOM
ALL
TOTAL 4:04:10
RANDOM PROGRAM
--no indication --
•
RANDOM screen will appear.
PLAY
Press the PLAY button
• Random playback will start.
Applicable MP3 file
Remarks
• It is prohibited to record
MP3 sound on a digital
device when connection is
made digitally.
Sampling fre- 44.1kHz
quency
48kHz
MP3 / JPEG / WMA Playback
MP3 JPEG WMA
This DVD player can reproduce images and sounds from
data recorded in MP3, JPEG and WMA formats on CD-R
and CD-RW discs.
The DVD player can also run JPEG files stored on Kodak
picture CD.
The user can enjoy picture images on the television set by
reproducing picture CDs.
• MP3 files recorded at fixed
bit rate of 112 kbps or high-
er are recommended.
MPEG1
audio layer 3
Type
Applicable JPEG file
Remarks
Upper limit:
• A JPEG image that extends
Size of
image
6300x5100 dots beyond the screen is
Lower limit:
32x32 dots
reduced so that it will be
displayed within the screen.
* Picture CD is a service to convert a photograph taken by
conventional film camera into digital data and write the data
on a CD.
For details of Picture CD, contact a shop that deals with
developing service of Kodak Inc.
EN
–
–
20
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
Applicable WMA file
Remarks
Slide Show Mode
•
Those frequencies are
applicable to WMA version 8
only, not to WMA version 9.
Sampling fre- 44.1kHz
JPEG
quency
Bit rate
48kHz
You can switch to the slide show mode during playback.
1
Press the MODE button during playback.
• Ensure that the copyright
function is set to off when
preparing a WMA disc.
• A prohibition “disable” sym-
bol will appear if the user
• The slide show mode screen will appear.
48–192kbps
• The slide show mode cannot be switched when it is
stopped, or from the file list screen or the Picture CD
menu screen.
Type
WMA version 8 attempts to run a non-repro-
ducible file such as copy-
2
3
Press the ENTER button.
• The slide show mode will change.
1 The entire image appears in one time.
2 The image appears gradually and then disappears.
right-protected.
For discs of JPEG or Kodak picture CD:
• A JPEG or Kodak Picture CD menu appears.
• If all menu items cannot be displayed in the screen scope,
a prompt symbol “G” appears at the right bottom of the
screen, indicating that the user can view remaining items
on the next page. If another prompt symbol “H” appears,
it indicates that the user can view other items on the previ-
ous page. The track number of the currently highlighted
item and the total tracks are shown at the center bottom of
the screen.
• If a prompt symbol “G” is shown at the right bottom, use
the SKIP G button to view the next page. If another
prompt symbol “H” is shown at the left bottom, use the
SKIP H button to view the previous page.
Press the MODE button to exit.
On-Screen Information
MP3 JPEG WMA
You can check each file during playback.
1
Press the DISPLAY button.
TRACK 01
• The name of the file currently in
play will be displayed.
• It may take some time until all menu items are displayed
on the menu screen.
1
For JPEG, press the cursor buttons (K/L), or for
Kodak Picture CD, press the cursor buttons (s /
B / K / L), select a desired group or track to be
played, then press the PLAY or ENTER button.
<Example: MP3>
2
Press the DISPLAY button again to show the track
number, the elapsed time, the repeat status, and
the playback status at the top of the screen.
will be displayed when the
repeat play has been selected.
T - indicates Track repeat
G - indicates Group (folder) repeat
A - indicates Disc repeat
• If an MP3 or WMA file is selected, reproduction will start
from the selected track and go to the next one in turn.
• If a JPEG or Kodak picture CD file is selected, an image
will be reproduced from the selected track and go to the
next one in turn.
•
1/36 0:01:15
A track is displayed for five seconds and then the next
track is displayed.
Every press on the cursor button B will turn the image
clockwise by 90 degrees when an image is displayed.
A press on the cursor button s will turn the image coun-
terclockwise by 90 degrees.
3
Press the DISPLAY button
again to exit.
• During program or random playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button again to exit.
• If a group is selected, press the cursor button K/L to
select a desired group, then press the B, PLAY or ENTER
button to select a track.
If you press the PLAY or ENTER button, reproduction of
the picture will start.
Track Selection
MP3 JPEG WMA
Press the SEARCH MODE button during playback.
• The FILE LIST will appear.
Notes on MP3, JPEG and WMA:
• Select “FIRST PLAY” and press the PLAY button, playback
1
2
from the top of the disc in the order of tracks and groups.
• The ninth and deeper hierarchies cannot be played.
• The name of group and track can be displayed in up to 25
characters. Unrecognizable characters will be replaced
with asterisks.
• Un-reproducible groups or tracks may be displayed
depending on the recording conditions.
• If the TOP MENU button is pressed when a file list is dis-
played, “FIRST PLAY” will be highlighted.
Select a desired track using the cursor buttons
(L/K/B/s).
• Press the
B
button when you want to go to the next
hierarchy.
• Press the
s
button when you want to go back to the
previous hierarchy.
3
Press the PLAY button to start playing
NOTES:
•
•
Press the SEARCH MODE button to exit.
Some selections may require additional time to be recog-
nized.
2
Press the STOP button, to stop playback.
•
•
During play, a desired track can be directly searched. Just
type in the TRACK number with the numeric buttons.
If the typed TRACK number is not available, the “disable”
symbol appears and the direct search mode is cancelled.
Playback cannot be started from a desired time count.
Pressing the SKIP button G or H will play the next or
previous file.
Notes on Kodak picture CD:
• A press on the STOP button will highlight the previously
displayed track on the menu screen.
Press the STOP button again or press the TOP MENU
button, and the menu screen displays Tracks 1 to 6, where
Track 1 is highlighted.
•
•
•
The SEARCH button is not effective for Picture CD.
EN
–
–
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
Random Playback
Audio Language or Sound Mode
DVD-V
MP3 JPEG WMA
The DVD player allows you to select
1
2
Press the MODE button twice
RANDOM
CD [DATA]
a language during DVD disc (if multi language available)
playback.
while playback is stopped.
RANDOM PROGRAM
--no indication --
1
2
Press the AUDIO button during playback.
Press the AUDIO button repeatedly to select your
desired language.
PLAY
1. ENG
DolbyD 5.1ch 48k/3
Press the PLAY button to play the tracks in random
order.
• Random play starts.
• For a disc containing mixed MP3, JPEG and WMA
files, random play of those files will be performed.
2. FRE
DolbyD 5.1ch 48k/3
Program
3. JPN
DolbyD 5.1ch 48k/3
MP3 JPEG WMA
This feature allows you to program a MP3 disc to play in a
desired sequence.
1
2
3
Press the MODE button while
PROGRAM
MP3 COLLECTION
-
playback is stopped.
FOLDER
MP3
WMA
JPEG
ALBUM01
ALBUM02
ALBUM03
ALBUM04
ALBUM05
ALBUM06
ALBUM07
• The PROGRAM screen will
appear.
Bon jour
HELLO
1/3
1/1
ENTER
PLAY
CLEAR
ALBUM01
Press the K or L button to
select a group, then press the
ENTER button.
NOTES:
PROGRAM
ALBUM01
FOLDER
MP3
WMA
JPEG
• The sound mode cannot be changed during playback
of discs not recorded in double sound.
TRACK08
TRACK09
TRACK10
TRACK11
TRACK12
TRACK13
TRACK14
TRACK11
• A track selection screen appears.
• Pressing the AUDIO button may not work on some
DVDs with multiple audio languages (e.g. DVDs which
allow audio language setting on the disc menu).
• The sound mode cannot be changed during playback
of a Super Audio CD. (It may be possible to switch the
sound mode when playing back discs including a CD
area.)
2/3
1/1
ENTER
PLAY
TRACK11
CLEAR
Press the K or L button to
select a track, then press the
ENTER, button to save it in a
program.
• Press the CLEAR button to
erase the incorrect input.
• The programmed track is dis-
played in the right-hand screen.
• If the entire program cannot be displayed at once on
the screen, “L” appears to go to the next page.
PROGRAM
FOLDER
ALBUM05
MP3
WMA
JPEG
TRACK48
TRACK49
TRACK50
TRACK51
TRACK52
TRACK53
TRACK54
TRACK11
TRACK81
TRACK31
TRACK22
TRACK03
DVD-A
TRACK53
TRACK25
1
2
Press the AUDIO button during playback.
Press the AUDIO button repeatedly to select your
desired sound.
2/3
2/3
ENTER
CLEAR
PLAY
TRACK51
NOTE:
• “2. PPCM 2.0ch 96k/2” can be displayed even if there is
no second sound. (The sound number during playback
remains as 1.)
• Pressing the s button will show a list of folders that
belong to the one-level upper hierarchy than the cur-
rently selected folder.
4
Press the PLAY button to start programmed play-
1.LPCM 5.1ch 96k/2
back.
• Programmed play starts.
NOTES:
2.PPCM 2.0ch 96k/2
• Press the CLEAR button, and the last-programmed
entry will be deleted.
• Press the RETURN button, and the STOP screen will
show up with the program contents in memory.
• Press the STOP button, and then press the PLAY but-
ton. Playback will restart from the beginning of the track
being played previously (Program cleared).
Stereo Sound Mode
• The program setting will be cancelled when the power
is turned off or the disc tray is opened.
CD
VCD
• Up to 99 tracks can be set in a program.
1
Press the AUDIO button repeatedly during play-
back to select between STEREO, L-CH or R-CH.
STEREO - both right and left channels are active (stereo)
• If a disc in inserted that contains mixed MP3, JPEG
and WMA files, program setting allows 99 tracks for
combination of MP3, JPEG and WMA files.
• If eight or more tracks have been set in a program, the
user can switch the right part of the screen with the
SKIP button H or G.
L-CH - only left channel is active
R-CH - only right channel is active
EN
–
–
22
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
STEREO
Camera Angle
Both right and left channels
are active (stereo).
DVD-V
L-CH
R-CH
Only the left channel
is active.
Some DVD discs contain scenes which have been shot simulta-
neously from various angles. You can change the camera angle
when the (
) mark appears on the screen.
1
Press the ANGLE button during playback.
Only the right channel
is active.
• The selected angle will be displayed on the display bar
at the top of the screen.
2
Press the ANGLE button repeatedly to select your
NOTES:
desired angle
.
•
If the Virtual Surround setting is ON, the sound mode will
be fixed to STEREO, and can not be changed.
Stereo sound mode will not be changed when playing DTS CD.
1 / 8
•
Angle 1
Angle 2
2 / 8
Subtitle Language
DVD-V
The DVD player allows you to select
a language for subtitle during DVD disc (if available) playback.
8 / 8
Angle 8
1
2
Press the SUBTITLE button during playback.
Press the SUBTITLE button repeatedly to select
your desired subtitle language.
• The selected language will be displayed on the display
bar at the top of the screen.
To turn off subtitles, press the SUBTITLE button
repeatedly until OFF appears.
Changing the On-Screen Display
3
DVD-V
1.ENG/6
You can check information about the current disc by pressing
the DISPLAY button on the remote control.
Subtitle 1
1
Press the DISPLAY button during
9/49
0:00:00 -0:00:00
playback to show current Chapter
.
2.FRE/6
• The elapsed and remaining play-
ing time of the current chapter
will be displayed.
Press the DISPLAY button again
to show current Title.
• The elapsed and remaining playing time of the current
title will be displayed.
Press the DISPLAY button the
third time.
Subtitle 2
2
3
OFF
OFF
T
IIII
NOTES:
• The BIT RATE and the current
repeat setting will be displayed.
•
•
•
Some discs allow audio language setting/subtitle language
setting on the disc menu. (Operation varies between discs,
so refer to the manual accompanying the disc.)
If the desired language is not shown after pressing the
SUBTITLE button several times, the disc does not have subtitles
in that language.
If you choose a Language that has a 3-letter language
code, the code will be displayed every time you change the
Subtitle language setting. If you choose any other lan-
guages, ‘---’ will be displayed instead. (Refer to page 28.)
• If you are playing a dual layered
disc, the layer number will also
be displayed ( L0: Layer 0 is playing. L1: Layer 1 is
playing).
Press the DISPLAY button the fourth time to remove
the display.
4
1
SUPER
AUDIO CD
CD
VCD
Press the DISPLAY button during playback, the
current Track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
Press the DISPLAY button again to show the Total Tracks.
• The elapsed and remaining playing time of the disc will
be displayed.
Press the DISPLAY button for the third time to
remove the display.
2
3
EN
–
–
23
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
Black Level Setting
DVD-A
You can check information about the current disc by pressing
the DISPLAY button on the remote control.
DVD-A DVD-V VCD
1
2
3
Press the DISPLAY button during playback to show cur-
Adjust the Black Level Settings to make
rent Track
.
the black parts of the picture as bright as you preferred.
• The elapsed and remaining playing time of the current
track will be displayed.
Press the DISPLAY button again to show current
Group.
• The elapsed and remaining playing time of the current
1
2
Press the MODE button during playback.
Press the ENTER button to switch ON/OFF
.
ON (Default) : Makes the dark
parts brighter.
ON
OFF : Shows the original pic-
ture as recorded.
group will be displayed.
Press the DISPLAY button for
the third time.
3
Press the MODE or RETURN
T
IIII
button to exit.
• The BIT RATE and the current
repeat setting will be displayed.
•
If you are playing a dual layered
disc, the layer number will also
be displayed ( L0: Layer 0 is
playing. L1: Layer 1 is playing).
Virtual Surround
DVD-A DVD-V VCD
4
Press the DISPLAY button for the fourth time to
You can enjoy stereophonic visual
space on your existing 2 channel
stereo system.
remove the display.
Hints for the
On-Screen Display
1
Press the MODE button twice
during playback
.
•
•
•
•
C - indicates Chapter repeat
- indicates Title or Track repeat
T
G - indicates Group (folder) repeat
A - indicates Disc repeat
• A B- indicates A-B repeat
2
3
Press the ENTER button to set it 1(Natural effect),
2(Emphasized effect) or OFF.
Press the RETURN button to exit.
Marker Setup Screen
SUPER
AUDIO CD
DVD-A DVD-V
CD
VCD
CD
MP3 WMA
Use markers to memorise
your favourite places on a disc.
1
2
Press the MODE button during playback
Press the ENTER button to set 1(Natural effect),
2(Emphasized effect) or OFF.
.
1
Press the SEARCH MODE
button four times (CD, Super
Audio CD, VCD: three times)
during playback.
• The display screen and Markers
will appear on the TV screen.
3
Press the RETURN button to exit.
NOTES:
• Select Virtual Surround OFF or adjust the volume down
if the sound is distorted.
• When 5.1CH is selected as the audio channel in the
audio setting of the setup menu, Virtual Surround does
not function. Details are on page 26.
• The Virtual Surround setting is not available for Super Audio
CDs. (It may be possible to use the Virtual Surround setting
when playing back discs that include a CD area.)
2
3
Press the s or B button to select 1, 2, 3, 4, 5, 6,
7, 8, 9, or 10 and ensure that “- : - - : - -” appears
in the display.
When reaches the desired point, press the ENTER
button.
• The Title or Track and elapsed playing time will appear
in the TV screen.
4
To return to the Marker later, press the SEARCH
MODE button four times (CD, Super Audio CD,
VCD: three times) during playback and the s or
button to choose the desired marker, then press
the ENTER button.
B
NOTES:
• Opening the disc tray or turning off the power or select
2
AC at step
all Markers.
and press the ENTER button will erase
• To clear a marker, using the s or B button, position
the cursor on to the marker number to be cleared and
press the CLEAR button.
• You can mark up to 10 points.
5
Press the SEARCH MODE or RETURN button to
exit.
EN
–
–
24
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP
In Setup menu, QUICK mode and CUSTOM mode are availale. QUICK mode consists of the set-
ting menus often needed, and you can make all settings required in CUSTOM mode.
You can make the settings of the items with QUICK mark in QUICK mode.
Language Setting
Display Setting
You can change certain aspects of the DVD display screens, on-screen
messages and the display panel on the front of the DVD player.
Language options are not available with some discs.
1
2
Press the SETUP button in STOP mode.
Press the B button to select CUSTOM, then press the
ENTER button.
1
2
Press the SETUP button in STOP mode.
Press the B button to select CUSTOM, then press
the ENTER button.
• CUSTOM mode will appear.
•
CUSTOM mode will appear.
3
Press the s or B button to se-
3
Press the s or B button to se-
lect DISPLAY, then the ENTER
button to confirm.
lect LANGUAGE, then the EN-
TER button to confirm.
LANGUAGE
AUDIO
ENGLISH
ENGLISH
ENGLISH
ENGLISH
DISPLAY
SUBTITLE
DISC MENU
PLAYER MENU
TV ASPECT
PANEL DISPLAY
ANGLE ICON
16:9 WIDE
BRIGHT
ON
AUTO POWER OFF
ON
4
Press the K or L button to select the below items,
4
Press the K or L button to select the below items, then
press the ENTER button.
then press the ENTER button.
(Default : ENGLISH)
AUDIO
• Sets the audio language.
(Default : 16:9 WIDE)
TV ASPECT
LANGUAGE
AUDIO
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
QUICK
DISPLAY
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
• Press the K or L button for an
item selection, then press the EN-
TER button.
SWEDISH
(Default : ENGLISH)
SUBTITLE
•
Select 4:3 LETTER BOX for a
black bars appears on top and bottom of the screen.
• Sets the subtitle language.
LANGUAGE
SUBTITLE
• Select 4:3 PAN & SCAN for a full height picture with both
sides trimmed.
OFF
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
•
Select 16:9 WIDE if a wide-screen TV is connected to the
DVD player.
(Default : BRIGHT)
PANEL DISPLAY
(Default : ENGLISH)
DISC MENU
• Press the K or L button for an
item select BRIGHT, DIMMER
and AUTO, then press the ENTER
button.
• Sets the language for DVD Menu.
DISPLAY
PANEL DISPLAY
LANGUAGE
DISC MENU
BRIGHT
DIMMER
AUTO
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
DUTCH
• This adjusts the brightness of the
display panel with the factory de-
fault BRIGHT.
PLAYER MENU
•
When AUTO is selected, the display dims only during playback.
(Default : ENGLISH)
QUICK
LANGUAGE
PLAYER MENU
• Sets the language for the On-
Screen display.
ENGLISH
FRANCAIS
ESPANOL
(Default : ON)
ANGLE ICON
DISPLAY
• Press the ENTER button repeat-
edly to turn Angle mark ON or
OFF.
TV ASPECT
PANEL DISPLAY
ANGLE ICON
16:9 WIDE
BRIGHT
ON
AUTO POWER OFF
ON
5
Press the K or L button to select a setting, then
press the ENTER button.
• If OTHER is selected in the AUDIO, SUBTITLE or DISC
MENU screen, press four-digit number to enter the code
for the desired language. (Refer to the language code
list on page 28).
(Default :ON)
AUTO POWER OFF
DISPLAY
• Press the ENTER button repeat-
edly to turn Auto Power ON or
OFF.
TV ASPECT
PANEL DISPLAY
ANGLE ICON
16:9 WIDE
BRIGHT
ON
AUTO POWER OFF
ON
• Only the languages supported by the disc can be select-
ed.
• It will turn the DVD player to off au-
tomatically after 35 minutes of no
use.
6
Press the SETUP button to exit.
NOTE:
5
Press the SETUP button to exit.
•
Language Setting for Dialog and Subtitle is not available
with some discs. Then use the AUDIO and SUBTITLE but-
tons.
NOTE:
•
Be sure to press the SETUP button, or the setting will not work.
Details are on pages 22 and 23.
EN
–
–
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP
Audio Setting
Speaker Setting
When 5.1CH is selected for analog out, some speaker settings
will be required.
Choose the appropriate Audio settings for your equipment as it
only affect during the playback of DVD discs of the DVD player.
1
Press the K or L button to select 5.1CH, then
1
2
Press the SETUP button in STOP mode.
Press the B button to select CUSTOM, then press
the ENTER button.
press the ENTER button.
2
Press the K or L button to
AUDIO
5.1 CH
select the below items, then
SPEAKER SIZE
press the ENTER button.
• CUSTOM mode will appear.
DELAY TIME
BALANCE
3
Press the s or B button to
AUDIO
select AUDIO, then the ENTER
button to confirm.
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING ON
ANALOG
SACD
OFF
ON
PCM
2.0 CH
MULTI-CH
SPEAKER SIZE
• Press the K or L button to select
the speaker to set.
4
Press the K or L button to select the below items,
AUDIO
SPEAKER SIZE
then press the ENTER button.
DRC (Dynamic Range Control)
(Default : OFF)
FRONT (L/R)
CENTER
SUB WOOFER
LARGE
LARGE
ON
AUDIO
SURROUND (L/R) LARGE
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING ON
ANALOG
SACD
OFF
ON
PCM
• To compress the range of sound
volume.
2.0 CH
MULTI-CH
• Press Enter until the desired speaker size appears.
(Default : ON)
DOLBY DIGITAL
QUICK
FRONT(L/R), CENTER, SURROUND(L/R)
(Default: LARGE)
LARGE: Select this when the connected speaker is capable
of playing back sounds of 100Hz or less.
Set to ON when the player is con-
nected to Dolby Digital Decoder.
ON : Output by Dolby Digital
OFF: Convert the Dolby Digital to
PCM
AUDIO
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING ON
ANALOG
SACD
OFF
ON
PCM
SMALL: Select this when the connected speaker is not
capable of playing back sounds of 100Hz or less.
2.0 CH
MULTI-CH
OFF:
Select this when it is not connected. (It cannot be
set OFF on the FRONT speaker.)
SUB WOOFER (Default: ON)
DTS (Default : PCM)
DTS: Output by DTS sound
Set to DTS when the unit is
connected to DTS Decoder.
PCM: Convert the Dolby Digital to
PCM
ON:
OFF:
Select this when SUB WOOFER is connected.
Select this when it is not connected.
AUDIO
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING ON
ANALOG
SACD
OFF
ON
PCM
NOTES:
• “OFF” is not available for SUB WOOFER when
“SMALL” is selected for FRONT(L/R).
2.0 CH
MULTI-CH
• “SMALL” is not available for FRONT(L/R) when “OFF” is
selected for SUB WOOFER.
(Default : ON)
DOWN SAMPLING
• When in playback of DVD audio, the sound may not
come out as set due to restrictions in the disc or the
player.
• During DVD-Audio playback, the Low Pass Filter (which
filters out the sound with the sound wave frequency
over 100Hz) of the SUB WOOFER will be turned off
with the following speaker setting. Otherwise, the Low
Pass Filter will be turned on.
• Set to ON when outputting in
48kHz.
AUDIO
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING ON
ANALOG
SACD
OFF
ON
PCM
2.0 CH
MULTI-CH
When playing disc with copright Protection
• Even If you select OFF, copyright protection will be acti-
vated and sound will be down sampled at 48kHz.
FRONT(L/R): LARGE
CENTER: LARGE
(Default : 2.0 CH)
SUB WOOFER: ON
SURROUND(L/R): LARGE
ANALOG
2.0 CH : Output 2ch sound
5.1 CH : Output Multi channel sound
DELAY TIME
To enjoy 5.1-channel surround sound, the distance between the lis-
tening position and all speakers (excluding the Sub woofers) should
ideally be set at a uniform distance on a circle. If the speakers can-
not be set at this manner, the ideal listening position can be virtually
created with the delay time setting.
AUDIO
AUDIO
ANALOG
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING ON
ANALOG
SACD
OFF
ON
PCM
2.0 CH
5.1 CH
2.0 CH
MULTI-CH
K or L button to select the
setting item, then press the ENTER
Use the
SACD (Default : MULTI-CH)
2 CH : Playback a 2ch area.
AUDIO
DELAY TIME
button.
DISTANCE
FRONT(L/R)
CENTER
SURROUND
DEFAULT
FEET
10ft
10ft
10ft
ON
MULTI-CH : Playback a multi-ch area.
CD AREA : Playback a CD area.
• Press the K or L button to select
the speaker to set, then press
the ENTER button.
•
When choosing MULTI-CH, choose 5.1CH as well as the
audio channel in the audio setting of the setup menu.
DISTANCE (Default : FEET)
METERS(when the ENTER button is pressed):
The unit of distance is set to meters (“m”).
FEET(when the ENTER button is pressed):
The unit of distance is set to feet (“ft”).
AUDIO
AUDIO
SACD
DRC
DOLBY DIGITAL
DTS
OFF
ON
PCM
2 CH
MULTI-CH
CD AREA
DOWN SAMPLING ON
ANALOG
SACD
2.0 CH
MULTI-CH
5
Press the SETUP button to exit.
EN
–
–
26
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP
FRONT(L/R), CENTER, SUR-
Parental Control
ROUND(L/R) (Default : 10ft)
AUDIO
DELAY TIME
FRONT(L/R):
Ratings Control limits playback of discs with unsuitable audience
ratings. A four digit code established by the user will unlock the
parental lock.
This feature allows you to prevent discs with objectionable
scenes from being played by your children.
DISTANCE
FRONT(L/R)
CENTER
SURROUND
DEFAULT
FEET
10ft
10ft
10ft
ON
The distance can be set within the
range of 0 to 60 feet.
CENTER, SURROUND:
These are depends on the setting
value of FRONT(L/R).
PARENTAL LEVEL
AUDIO
FRONT(L/R)
Rating Level allows you to set the rating level of your DVD discs.
Playback will stop if the disc’s ratings exceed the level you set.
11ft
10ft
9ft
8ft
7ft
1
Press the SETUP button in STOP mode.
Press the B button to select CUSTOM, then press
the ENTER button.
6ft
5ft
2
NOTES:
3
4
Press the s or B button to se-
• It is not possible to adjust this item if CENTER and
SURROUND have been set to OFF in the SPEAKER
SIZE setting.
• When DEFAULT is selected and the ENTER button is
pressed, all the items are restored to their factory
default settings.
lect PARENTAL, then press the
PARENTAL
ENTER button.
Please enter
a
4-digit password.
Enter your four-digit password
then press the ENTER button.
BALANCE
5
Press the K or L button to se-
lect PARENTAL LEVEL, then
press the ENTER button.
When the channel level differs from each speaker, the adjust-
ment can be made in the unit of dB (-12dB to 0dB).
TEST:
PARENTAL
PARENTAL LEVEL ALL
CHANGE
• Press the K or L button to select
TEST, then press the ENTER
button.
AUDIO
BALANCE
The test tone will output from
TEST
FRONT (L)
CENTER
FRONT (R)
SUB WOOFER
SURROUND (R)
SURROUND (L)
0dB
0dB
0dB
0dB
0dB
0dB
each speaker in turn.
6
7
Press the K or L button to se-
lect the desired level, then
press the ENTER button.
PARENTAL
PARENTAL LEVEL
ALL
8
7[NC-17]
6[R]
5
CHANNEL LEVEL:
4[PG13]
3[PG]
• Press the K or L button to select
the speaker to set, then press
the ENTER button.
Press the SETUP button to exit.
NOTES:
AUDIO
TEST
•
•
•
When doing this for the first time, enter any 4 digits. (except for
4737) That number will be used as the password from the sec-
ond time onward.
FRONT (L)
CENTER
FRONT (R)
SURROUND (R)
SURROUND (L)
0dB
0dB
-1dB
-2dB
-5dB
To change the password, press the K or L button to select
CHANGE at step
5
, then press the ENTER button. Enter the
four-digit password, then press the ENTER button.
With some DVDs, it may be difficult to find if they are compati-
ble with parental lock.Be sure to check if the parental lock func-
tion operates in the way that you have set.
Record the password in case you forget it.
The parental lock level is equivalent to the following USA movie
ratings.
• Press the K or L button to select
the desired level for each speak-
er, then press the ENTER but-
ton.
AUDIO
FRONT (L)
•
•
0dB
-1dB
-2dB
-3dB
-4dB
-5dB
-6dB
LEVEL 7: NC-17
LEVEL 6: R
LEVEL 4: PG13
NOTES:
LEVEL 3: PG
• While the test tone is being output, the channel bal-
ance adjustment cannot be made.
LEVEL 1: G
The parental lock levels for “CANADA” are included for future use.
Check the appropriate parental lock level when you buy a DVD
video disc equipped with the parental lock feature in the future.
• When TEST is selected, no test tone will be output
from SUBWOOFER.
• It is not possible to adjust this item for the speaker that
has been set to OFF in Speaker Size setting.
3
Press the SETUP button to exit.
IF YOU FORGET THE PASSWORD
1
Press 4, 7, 3, 7 at step 4.
•
Password will be cleared and rating level will be set to ALL.
2
Repeat steps 5-7 to re-establish the parental lock.
CONTROL LEVELS
•
ALL
Parental lock is cancelled.
Level 8
•
•
•
DVD software of any grade (adult/general/children) can
be played back.
Levels 7 to 2
Only DVD software intended for general use and chil-
dren can be played back.
Level 1
Only DVD software intended for children can be played back,
with those intended for adult and general use prohibited.
EN
–
–
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP
Language
A-B
Abkhazian
Afar
Code
Language
Frisian
Code
Language
Malay
Code
Language
Code
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
6561
5165
6567
6569
6568
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
Galician
Malayalam
Maltese
Maori
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Afrikaans
Albanian
Amharic
Marathi
Moldavian
Mongolian
Nauru
Arabic
Tagalog
Tajik
Tamil
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
Armenian
Assamese
Aymara
Nepali
Norwegian [NOR]
O-R
Occitan
Tatar
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Telugu
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
Thai
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Tibetan
Tigrinya
Tonga
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Tsonga
Turkish [TUR]
Turkmen
Twi
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Macedonian
Malagasy
5861
5847
5868
5860
5866
5957
5953
Faroese
5261
5256
5255
5264
Singhalese
Siswat
Slovak
Fiji
Finnish [FIN]
French [FRE]
Slovenian
If you choose a Language that has a 3-letter language code, the code will be displayed every time you change the Audio or Subtitle language
setting on pages 22 and 23. If you choose any other languages, ‘---’ will be displayed instead. (3-letter language code is written in bracket.)
EN
–
–
28
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasives.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular
motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, adrasive cleaning agents or
antistatic spray intended for analogue records.
Cleaning the disc lens
• If the player still does not perform properly when it is operated while referring to the relevant sections and to “TROU-
BLESHOOTING GUIDE” in this Operating Instruction, the laser optical pickup unit may be dirty. Consult your dealer or
an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
Disc Handling
• Use discs which have the following logos on them.
(Optical audio digital discs.)
• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not used.
• Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be
played on the this product. Do not attempt to play such discs, as they may damage the
player.
DIGITAL VIDEO
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
•
You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details.
EN
–
–
29
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
If the DVD player does not perform properly when operated as instructed in this Operating Instruction, check the player, con-
sulting the following checklist.
Problem
No power
Solution
–Check if the AC power cord is properly connected.
–Unplug the outlet once, and wait for 5-10seconds and then plug it in
again
No sound or picture
–Check if the TV is switched on.
–Check the video connection
–Check the VIDEO/AUDIO cable connections to the TV
(See Connecting to a TV)
–The sound of a Super Audio CD is not output from the 2ch AUDIO
OUT jacks. Connect an audio cable to the 5.1ch AUDIO OUT jacks
(FRONT L, R).
–Check if the progressive switch is set correctly according to your TV.
If your TV is not compatible with progressive scan, keep the
Progressive switch to “INTERLACE.”
Distorted picture
–Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
–Connect the player directly to the TV.
–Connect DVD player directly to the TV.
–Make sure the disc is compatible with the DVD player.
–Adjust the volume.
Completely distorted picture or
black/white picture with DVD
No sound or distorted sound
–Check that the speakers are connected correctly.
–Check the digital connections.
No audio at digital output
–Check if the audio format of the selected audio language matches
your receiver capabilities.
Picture freezes momentarily
during playback
–Check the disc for fingerprints/scratches and
clean with a soft cloth wiping from center to edge.
–Clean the disc
Disc can’t be played
–Clean the disc
–Ensure the disc label is facing up.
–Check if the disc is defective by trying another disc.
–Cancel the parental lock or change the control level.
–Insert a correct disc that plays on this player.
–Reset the player by switching the player off, then on again.
No return to start-up screen when
disc is removed
The player does not respond to
the remote control
–Aim the remote control directly at the sensor on the front of the player.
–Reduce the distance to the player.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
–To completely reset the player, unplug the AC
cord from the AC outlet for 5-10 seconds.
Buttons do not work or player stops
responding
Player does not respond to some
operating commands during playback
DVD player cannot read
CDs/DVDs
–Operations may not be permitted by the disc.
Refer to the instructions of the disc.
–Use a commonly available cleaning CD/DVD to
clean the lens before sending the DVD player for repair.
–The angle cannot be switched for DVDs which do not contain
multiple angles. In some cases multiple angles are only recorded
for specific scenes.
Angle does not switch
Playback does not start when the title is selected –Check the “PARENTAL” setting.
The password for rating level has been forgotten
–Enter the default password “4737”, then your forgotten password
will be cleared
No sound of Super Audio CD is output
–Check if an audio cable is connected to the 5.1ch AUDIO OUT
jacks (FRONT L,R).
NOTES:
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operating
Instruction for details on correct operations.
•
Playback from a desired track and random playback are not available during program playback.
EN
–
–
30
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
SIGNAL SYSTEM
DIGITAL AUDIO OUTPUT
NTSC color
Optical digital output: Optical connector, 1 set
Coaxial digital output: Pin jack, 1 set
APPLICABLE DISCS
(1) DVD-Audio/DVD-Video Discs
1-layer 12cm single-sided discs, 2-layer 12cm single-sided
discs, 2-layer 12cm double-sided discs (1 layer per side)
1-layer 8cm single-sided discs, 2-layer 8cm single-sided
discs, 2-layer 8cm double-sided discs (1 layer per side)
(2) Super Audio CD
(3) DVD-R/DVD-RW
(4) Compact discs (Audio CD, Video CD)
12cm discs, 8cm discs
POWER SUPPLY
AC 120V, 60Hz
POWER CONSUMPTION
16W (Standby: 0.4W)
MAXIMUM EXTERNAL DIMENSIONS
440 (width) x 75 (height) x 211 (depth) mm
(17-5/16” x 2-61/64” x 8-5/16”) (including protruding parts)
(5) CD-R/CD-RW
MASS
2.2Kg (4.9lbs)
S-VIDEO OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
C output level: 0.286Vp-p
Output connectors: S connectors, 1 set
REMOTE CONTROL UNIT
RC6400DV
Infrared pulse type
VIDEO OUTPUT
Output level: 1Vp-p (75Ω/ohms)
Supply: DC 3V, 2 R6P/AA batteries
Output connector: Pin jacks, 1 set
COMPONENT OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
CB/PB output level: 0.7Vp-p (75Ω/ohms)
CR/PR output level: 0.7Vp-p (75Ω/ohms)
Output connector: Pin jacks, 1 set
AUDIO OUTPUT
Output level: 2Vrms
2 channel (L, R) output connector: Pin jack, 1 set
Multi channel (FL, FR, C, SW, SL, SR) output connector: Pinjack, 1 set
AUDIO OUTPUT PROPERTIES
(1) Frequency response
1 DVDs (linear PCM) : 4Hz to 22kHz (48 kHz sampling)
: 4Hz to 44kHz (96 kHz sampling)
: 4Hz to 88kHz (192 kHz sampling)
2 CDs
3 Super Audio CD
(2) S/N ratio
: 4Hz to 20kHz
: 4Hz to 100kHz
: 115dB
(3) Total harmonic distortion : 1kHz CD: 0.003%
(4) Dynamic range
: DVD: 100dB
CD: 98dB
EN
–
–
31
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
You can find your nearest authorized distributor or dealer on our website.
JAPAN
U.S.A
Marantz Japan, Inc.
Marantz America, Inc.
Marantz Europe B.V.
35-1 Sagami Ohno 7-Chome, Sagamihara-shi, kanagawa 228-8505, Japan
1100 Maplewood Drive, Itasca, IL 60143, U.S.A.
EUROPE
P.O. Box 8744, 5605 LS Eindhoven, The Netherlands
is a registered trademark.
2003/10
MITi
45AW851250
Printed in China
0VMN03870
★★★★★
E57M5UD
Download from Www.Somanuals.com. All Manuals Search And Download.
|