Model DV4200 User Guide
DVD Player
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
PAGE 3
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL
AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire
hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation,
use and servicing.
This unit is fully transistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read owner’s manual
6. Water and Moisture
After unpacking this product, read the owner’s
manual carefully, and follow all the operating and
other instructions.
Do not use this product near water-for example,
near a bath tub, wash bowl, kitchen sink. or laundry
tub; in a wet basement; or near a swimming pool
and the like.
2. Power Sources
This product should be operated only from the type
of power source indicated on the marking label. If
you are not sure of the type of power supply in your
home, consult your product dealer or local power
company. For products intended to operate from
battery power, or other sources, refer to the
operating instructions.
7. Cleaning
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
8. Power-Cord Protection
Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, playing particular
attention to cords at plugs, convenience receptacles,
and the point where they exit from the product.
3. Grounding or Polarization
This product is equipped with a polarized alternating
current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only
one way. This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
9. Overloading
Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result
in a risk of fire or electric shock.
10. Lightning
For added protection of this product during storms, or
when it is left unattended and unused for long
periods of time, unplug it from the wall outlet.
This will prevent damage to the product due to
lightning and power-line surges.
AC POLARIZED PLUG
4. Ventilation
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from overheating. These
openings must not be blocked or covered. The
openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s
instructions have been adhered to.
11. Object and Liquid Entry
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result in
a fire or electric shock. Never spill liquid of any kind
on the product.
12. Attachments
Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
5. Heat
The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 4 INTRODUCTION
IMPORTANT SAFETY INSTRUCTIONS (Cont’d)
13. Accessories
20. Laser Beam
Do not place this product on
an unstable cart, stand, tripod,
bracket, or table. The product
Do not look into the opening of the disc tray or venti-
lation opening of the product to see the source of
the laser beam. It may cause sight damage.
may fall, causing serious
injury to a child or adult, and
21. Disc
serious damage to the
product. Use only with a cart,
stand, tripod, bracket, or table
Do not use a cracked, deformed, or repaired disc.
These discs are easily broken and may cause seri-
ous personal injury and product malfunction.
recommended by the manufacturer, or sold with the
product. Any mounting of the product should follow
the manufacturer’s instructions, and should use a
mounting accessory recommended by the
manufacturer. A product and cart combination should
be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product and
cart combination to overturn.
22. Damage Requiring Service
Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
a) When the power-supply cord or plug is
damaged.
b) If liquid has been spilled, or objects have fallen
into the product.
14. Disc Tray
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation.
e) If the product has been dropped or damaged in
any way.
Keep your fingers well clear of the disc tray as it is
closing. It may cause serious personal injury.
15. Burden
Do not place a heavy object on or step on the
product. The object may fall, causing serious
personal injury and serious damage to the product.
16. Connecting
When you connect the product to other equipment,
turn off the power and unplug all of the equipment
from the wall outlet. Failure to do so may cause an
electric shock and serious personal injury. Read the
owner’s manual of the other equipment carefully and
follow the instructions when making any
connections.
f) When the product exhibits a distinct change in
performance-this indicates a need for service.
23. Servicing
Do not attempt to service this product yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
17. Sound Volume
Reduce the volume to the minimum level before you
turn on the product. Otherwise, sudden high volume
sound may cause hearing or speaker damage.
24. Replacement parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or
other hazards.
18. Sound Distortion
Do not allow the product to output distorted sound
for a longtime. It may cause speaker overheating
and fire.
25. Safety Check
19. Headphones
Upon completion of any service or repairs to this
product, ask the service technician to perform safety
checks to determine that the product is in proper
operating condition.
When you use the headphones, keep the volume at
a moderate level. If you use the headphones
continuously with high volume sound, it may cause
hearing damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
PAGE 5
Table of Contents
Introduction
Operation Using GUI Menu Icons
❏ General Information about GUI Menu Icons . . . . 22
❏ Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . 2
❏ IMPORTANT SAFETY INSTRUCTIONS . . . . . . 3-4
❏ Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . 5
❏ Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
❏ Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 7
❏ Identification of Controls . . . . . . . . . . . . . . . . . 8-11
Front Panel/Display Window . . . . . . . . . . . . . . . . . . . . 8
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Preparing the Remote Control . . . . . . . . . . . . . . . . . . 11
Operating with the Remote Control . . . . . . . . . . . . . . 11
❏ Detailed Description of each GUI Menu Icon . . . 23
Advanced Operation
❏ Using a Title Menu. . . . . . . . . . . . . . . . . . . . . . . 24
❏ Using a DVD Menu . . . . . . . . . . . . . . . . . . . . . . 24
❏ Changing Subtitle Language . . . . . . . . . . . . . . . 25
❏ Changing Audio Soundtrack Language. . . . . . . . 25
❏ Viewing from another Angle . . . . . . . . . . . . . . . . 26
❏ Producing a 3D Surround Effect. . . . . . . . . . . . . 26
❏ Repeat Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
❏ Storing Markers in Memory to be Viewed
Connections
(Listened to) again . . . . . . . . . . . . . . . . . . . . . . . 28
❏ Zoom Feature . . . . . . . . . . . . . . . . . . . . . . . . . . 29
❏ Random Play . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
❏ Program Play. . . . . . . . . . . . . . . . . . . . . . . . . . . 30
❏ Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . 12
❏ Connecting to an Audio System . . . . . . . . . . . . . 13
❏ Connecting to Optional Audio System . . . . . . 14-16
Enjoying Dolby Digital Sound. . . . . . . . . . . . . . . . . . . 14
Enjoying Dolby Pro Logic Surround Sound. . . . . . . . . 15
Enjoying 2 Channel Digital Stereo Sound. . . . . . . . . . 16
Enjoying DTS Sound . . . . . . . . . . . . . . . . . . . . . . . . . 16
❏
Playback with MP3 . . . . . . . . . . . . . . . . . . . . 31-32
Initial Settings
❏ Selection of Initial Settings . . . . . . . . . . . . . . . . . 33
❏ Selecting Disc Languages . . . . . . . . . . . . . . . . . 34
❏ Selecting Rating Level and Password . . . . . . 35-36
❏ Selecting TV Aspect. . . . . . . . . . . . . . . . . . . . . . 37
❏ Selecting Menu Language . . . . . . . . . . . . . . . . . 38
❏ Setting Remote Control Codes. . . . . . . . . . . . . . 38
❏ Selecting Digital Audio Output . . . . . . . . . . . . . . 39
❏ Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
❏ Table of Languages and Their Abbreviations. . . . 41
Basic Operation
❏ Basic Playback . . . . . . . . . . . . . . . . . . . . . . . 17-19
Stopping Play. . . . . . . . . . . . . . . . . . . . . . . . . . 19
Resume Play . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Last Scene Memory . . . . . . . . . . . . . . . . . . . . . 19
Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . 19
❏ Special Playback. . . . . . . . . . . . . . . . . . . . . . 20-21
Still Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Frame Advance . . . . . . . . . . . . . . . . . . . . . . . . 20
Skipping Chapters and Tracks Forward or Back . 20
To Scan at Fast Forward or Fast Reverse Playback . 21
Playing in Slow-Motion . . . . . . . . . . . . . . . . . . . 21
Reference
❏ Disc Requirements/Copyright Information. . . . . . 42
❏ Before Calling Service Personnel . . . . . . . . . . . . 43
❏ Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 6 INTRODUCTION
Precautions
Notes on handling
Notes on Moisture Condensation
❏
❏
❏
When shipping the DVD player, always use the
original shipping carton and packing materials.
For maximum protection, repack the unit as it was
originally packed at the factory.
Do not use volatile liquids, such as insect spray, near
the DVD player. Do not leave rubber or plastic
products in contact with the DVD player for a long
time. They will leave marks on the finish.
Moisture condensation damages the DVD player.
Please read the following carefully.
Moisture condensation occurs, for example, when
you pour a cold drink into a glass on a warm day.
Drops of water form on the outside of the glass. In
the same way, moisture may condense on the opti-
cal pick-up lens inside this unit, one of the most cru-
cial internal parts of the DVD player.
The top and rear panels of the DVD player may
become warm after a long period of use. This is
normal and not a malfunction.
n
❏
❏
When the DVD player is not in use, be sure to
remove the disc and turn off the power.
If you do not use the DVD player for a long period, the
unit may not function properly in the future. Turn on
and use the DVD player occasionally.
Moisture condensation occurs during the following
cases.
❏
❏
When you bring the DVD player directly from a cold
place to a warm place.
Notes on Locating
When you use the DVD player in a room where you
just turned on the heater, or a place where the cold
wind from the air conditioner directly hits the unit.
In summer, when you use the DVD player in a hot
and humid place just after you move the unit from
an air conditioned room.
❏
When you place this DVD player near a TV, radio, or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, move the DVD
player away from the TV, radio, or VCR.
❏
❏
When you use the DVD player in a humid place.
Notes on Cleaning
Use a soft, dry cloth for cleaning.
❏
For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry. Do not use any type of solvent, such as thinner
and benzine, as they may damage the surface of the
DVD player.
❏
Do not use the DVD player when moisture con-
densation may occur.
❏
If you use a chemical saturated cloth to clean the
unit, follow that product’s instructions.
If you use the DVD player in such a situation, it may
damage discs and internal parts. Remove the disc,
connect the power cord of the DVD player to the wall
outlet, turn on the DVD player and leave it “ON” for
two or three hours. After two or three hours, the
DVD player will have warmed up and evaporated
any moisture. Keep the DVD player connected to
the wall outlet and moisture condensation will sel-
dom occur.
Warning: Cleaning and adjustment of lenses
and/or other components of playback mechanism
should be performed by a qualified service
technician.
To Obtain a Clear Picture
The DVD player is a high technology, precision device. If
the optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality becomes poor. To obtain
a clear picture, we recommend regular inspection and
maintenance (cleaning or parts replacement) every
1,000 hours of use depending on the operating
environment. For details, contact your nearest dealer.
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
PAGE 7
Notes on Discs
This section shows you how to handle, clean, and store discs.
On Handling Discs
On Storing Discs
❏
Do not touch the playback side of the disc.
❏
❏
Do not store discs in a place subject to
direct sunlight or near heat sources.
Do not store discs in places subject to
moisture and dust such as a bathroom or
near a humidifier.
❏
Store discs vertically in a case. Stacking or
placing objects on discs outside of their
case may cause warping.
❏
Do not attach paper or tape to discs.
On Cleaning Discs
About This Owner’s Manual
❏
❏
❏
Fingerprints and dust on the disc cause
picture and sound deterioration. Wipe the
disc from the center outward with a soft
cloth. Always keep the disc clean.
If you cannot wipe off the dust with a soft
cloth, wipe the disc lightly with a slightly
moistened soft cloth and finish with a dry
cloth.
Do not use any type of solvents such as
thinner, benzine, commercially available
cleaners or anti-static spray for vinyl LPs.
They may damage the disc.
❏
❏
This owner’s manual explains the basic
instructions of this DVD player.
Some DVD video discs have functions that
may not be explained in this owner’s manual.
Therefore, some instructions may differ from
this owner’s manual, and there may be extra
instructions. In this case, follow the instructions
displayed on the TV screen or package.
❏
“
” may appear on the TV screen
during operation. This icon means the
function explained in this owner’s manual is
not available on that specific DVD video
disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 8 INTRODUCTION
Identification of Controls
Front Panel
PLAY button
PAUSE button
STOP button
OPEN/CLOSE button
Disc tray
POWER indicator
DVD PLAYER DV4200
OPEN/CLOSE
STOP
PLAY
STANDBY
STANDBY/ON
POWER
PAUSE
Display window
POWER button
Remote sensor
SKIP/SCAN buttons
Display Window
PROGRAM indicator
Operating status indicator
RANDOM indicator
CD indicator
DVD indicator
Repeat playback
mode indicators
MP3
CD DVD
TITLE
CHP/TRK
PROG.
RANDOM ALL
A
B
MP3 indicator
Angle icon indicator
Total playing time/elapsed time indicators
Chapter/Track number indicator
Title number indicator
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
PAGE 9
Identification of Controls (Cont’d)
Rear Panel
*REMOTE CONTROL IN/OUT jacks
AUDIO OUT 2 (L/R) jacks
COMPONENT VIDEO OUT jacks
AUDIO OUT 1 (L/R) jacks
COAXIAL DIGITAL AUDIO OUT jack
VIDEO OUTPUT SELECT Switch
DIGITAL
OUT
REMOTE
CONTROL
AUDIO
OUT2
COMPONENT
VIDEO OUT
AUDIO
OUT1
IN
L
L
COAXIAL
C
C
B
R
S-VIDEO
OUT
R
R
EXTERNAL INTERNAL
REMOTE CONTROL
COMPONENT
VIDEO
OUTPUT
VIDEO
OUT
S-VIDEO
OUT
Y
S-VIDEO OUT jack
VIDEO OUT jack
**REMOTE CONTROL INTERNAL/EXTERNAL Switch
POWER CORD
Connect to an AC 120V, 60Hz outlet only.
*REMOTE CONTROL IN/OUT jacks
By connecting this DVD player to another Marantz audio component using a supplied System Control cable, you can
remotely operate the components as a single system.
• When connecting to component with a remote sensor (such as the SR-14, SR-18, SR-19), be sure to connect the
"REMOTE CONTROL IN" jack of this DVD player to the "REMOTE CONTROL OUT" jack of the component with the
remote sensor.
• When connecting to component which is not equipped with a remote sensor, be sure to connect the component to
the "REMOTE CONTROL OUT" jack of this DVD player.
**Remote switch
• When using this DVD player independently, set this switch to "INTERNAL". When using this DVD player in a sys-
tem with a Marantz tuner or timer equipped with a remote sensor, set the switch to "EXTERNAL".
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 10 INTRODUCTION
Identification of Controls (Cont’d)
REMOTE CONTROL
You will find instructions for each of the remote control functions in the appropriate sections of this
instruction manual.
OPEN/CLOSE button
A-B button
POWER button
REPEAT button
SETUP button
POWER
OPEN/CLOSE
RANDOM button
ANGLE button
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
SUBTITLE button
AUDIO button
SUBTITLE ANGLE
SURR. button
TOP MENU
MENU
*MENU button
***TOP MENU button
SELECT/ENTER button
OSD button
**ARROW buttons
RETURN button
MARKER-SEARCH buttons
PLAY button
SELECT
/ENTER
OSD
RETURN
ZOOM button
ZOOM
SCAN
MARKER — SEARCH
SCAN (
/
) buttons
SKIP
PLAY
SKIP (
/
) buttons
) buttons
G
STOP button
STOP
PAUSE
SLOW
SLOW (
/
PAUSE button
Number buttons
CLEAR button
F
V
V
PROGRAM button
1
4
7
2
5
8
0
3
6
9
*MENU button
CLEAR
PROGRAM
Use the MENU button to display the
menu screen included on DVD video
discs. To operate a menu screen,
follow the instructions in “Using a DVD
Menu” (page 24).
***TOP MENU button
Use the TOP MENU button to display
the title screen included on DVD video
discs. To operate a menu screen,
follow the instructions in “Using a Title
Menu” (page 24).
** Directional arrow buttons
(up, down, left, right) for use in
highlighting a selection on a GUI menu
screen, TITLE and MENU screen.
• This remote control supports two remote control codes: C1 and C2.
• When the unit is shipped from the factory, the remote control is set to C1.
• To set the remote control to C2, hold down both the STOP button and "2" number button on the remote control
for at least five seconds. (If the batteries in the remote control are replaced while the remote control is set to C2,
the setting will revert C1.)
• To set the remote control back to C1, hold down both the STOP button and "1" number button on the remote
control for at least five seconds.
• Also set the remote control codes of the player to the same setting as the remote control. (This setting is set to
C1, when the unit is shipped from the factory.)
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
PAGE 11
Identification of Controls (Cont’d)
Preparing the Remote Control
Operating with the Remote Control
Insert the batteries into the remote control so you can
use it to operate the DVD player.
This section shows you how to use the remote control.
Point the remote control at the
remote sensor and press the
buttons.
Open the battery cover.
1
DVD PLAYER DV4200
OPEN/CLOSE
STOP
PLAY
STANDBY
STANDBY/ON
POWER
PAUSE
Insert batteries (AAA size).
2
30° 30°
Within about 17 ft (about 5 m)
POWER
OPEN/CLOSE
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
SUBTITLE ANGLE
TOP MENU
MENU
❏ Make sure to match the + and - on the batteries to
SELECT
/ENTER
the marks inside the battery compartment.
Distance: About 17 ft (5 m) from the front of the remote
sensor
Close the cover.
3
Angle:
About 30° in each direction of the front of the
remote sensor
*
Do not expose the remote sensor of the DVD
player to a strong light source such as direct
sunlight or illumination. If you do so, you may not
be able to operate the DVD player with the remote
control.
Notes on batteries
Notes on the remote control
❏
❏
❏
❏
❏
❏
❏
Improper use of batteries may cause battery leakage and
corrosion.
To operate the remote control correctly, follow the
❏
Point the remote control at the remote sensor on the
DVD player.
Do not drop or give the remote control a shock.
Do not leave the remote control near an extremely hot or
humid place.
Do not spill water or put anything wet on the remote con-
trol.
Do not disassemble the remote control.
❏
❏
instructions.
Do not insert the batteries into the remote control in the
wrong direction.
Do not charge, heat, open, or short-circuit the batteries.
Do not throw the batteries into fire.
Do not leave dead or exhausted batteries in the remote
control.
Do not use different types of batteries together, or mix
old and new batteries.
If you do not use the remote control for a long period of
time, remove the batteries to avoid possible damage
from battery corrosion.
❏
❏
❏
If the remote control does not function correctly or if the
operating range becomes reduced, replace all batteries
with new ones.
❏
❏
If battery leakage occurs, wipe the battery liquid from the
battery compartment, then insert new batteries.
The batteries should last about one year with normal
use.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 12 CONNECTIONS
Connecting to a TV
Connect the DVD player to your TV.
VIDEO OUTPUT
SELECT switch
Audio/Video cable (supplied)
DIGITAL
OUT
REMOTE
CONTROL
AUDIO
OUT2
COMPONENT
VIDEO OUT
AUDIO
OUT1
IN
L
L
COAXIAL
C
C
B
R
S-VIDEO
OUT
R
R
To AUDIO OUT (L/R)/VIDEO OUT
COMPONENT
VIDEO
OUTPUT
VIDEO
OUT
S-VIDEO
OUT
Y
To S-VIDEO OUT
To COMPONENT
VIDEO OUT
When using COMPONENT VIDEO OUT jack, set the VIDEO
OUTPUT switch to COMPONENT or when using S-VIDEO
OUT jack, set the VIDEO OUTPUT switch to S-VIDEO.
To video input
To audio inputs
Video cable (Y, CB, CR) (not supplied)
S-video cable (not supplied)
To S-video input
If the TV has an S-video input, connect
the DVD player with the S-video cable.
TV or monitor with
audio/video inputs
Notes
❏
❏
Refer to the owner’s manual of your TV as well.
Before you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
❏
Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback picture will be distorted
because DVD video discs are copy protected.
Warning
Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL OUT jack of this
DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well
as the speakers (Refer to “Selecting Digital Audio Output” on page 39).
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
PAGE 13
Connecting to an Audio System
You can listen to the sound of audio CDs and DVD video discs in stereo.
S-video cable (Not supplied)
DIGITAL
OUT
REMOTE
CONTROL
AUDIO
OUT2
COMPONENT
VIDEO OUT
AUDIO
OUT1
To S-VIDEO OUT
IN
L
L
COAXIAL
C
C
B
R
If the TV has an S-video input, connect
the DVD player with the S-video cable.
S-VIDEO
OUT
R
R
COMPONENT
VIDEO
OUTPUT
VIDEO
OUT
S-VIDEO
OUT
Y
To AUDIO OUT (L/R)
To VIDEO OUT
To S-video input
To video input
Video cable (Supplied)
TV or monitor with
audio/video inputs
To audio inputs
Audio cable (Supplied)
Audio system
Notes
❏
❏
Refer to the owner’s manual of your audio system as well.
Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
❏
❏
❏
If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, move the DVD
player away from the tuner and radio.
The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the
speakers may be damaged.
Warning
Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL OUT jack of this DVD
player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the
speakers (Refer to “Selecting Digital Audio Output” on page 39).
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 14 CONNECTIONS
Connecting to Optional Audio System
Enjoying Dolby Digital Sound
You can enjoy the high quality dynamic sound of Dolby Digital, Dolby Pro Logic, and 2 Channel Digital Stereo.
Dolby Digital
Dolby Digital is the surround sound technology used in theatres showing the latest movies, and is now available to
reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this
dynamic realistic sound by connecting the DVD player to a 6 channel receiver equipped with a Dolby Digital decoder
or Dolby Digital processor.
DIGITAL
OUT
REMOTE
CONTROL
AUDIO
OUT2
COMPONENT
VIDEO OUT
AUDIO
OUT1
IN
L
L
COAXIAL
C
C
B
R
S-VIDEO
OUT
R
R
COMPONENT
VIDEO
OUTPUT
VIDEO
OUT
S-VDEO
OUT
Y
To DIGITAL OUT
To S-VIDEO OUT
or VIDEO OUT
S-Video cable
or Video cable
75 ohm coaxial cable
Receiver equipped
with a Dolby Digital
decoder
Connection
example
To digital
audio input
To S-video Input
or Video Input
To enjoy Dolby Digital sound
from this DVD player you need
the following:
Front speaker
(right)
Front speaker
(left)
Center
speaker
❏
❏
DVD recorded in Dolby Digital
6 channel receiver equipped
with a Dolby Digital decoder,
or Dolby Digital processor and
power receiver
Sub woofer
Rear speaker
(left surround)
Rear speaker
(right surround)
❏
5 speakers and 1 sub woofer
* Manufactured under license from Dolby Laboratories.
To enjoy Dolby Digital sound
You need to select “Dolby Digital”
on the SETUP menu.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
Notes
❏
❏
Refer to the owner’s manual of your audio equipment as well.
Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from
the wall outlet before making any connections.
❏
❏
The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the
speakers may be damaged.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
PAGE 15
Connecting to Optional Audio System (Cont’d)
Enjoying Dolby Pro Logic Surround Sound
Dolby Pro Logic Surround
You can still enjoy the excitement of Surround Sound even if your A/V receiver does not offer Dolby Digital decoding.
If your A/V receiver has a Dolby Pro Logic decoder, refer to the following connection diagram.
DIGITAL
OUT
REMOTE
CONTROL
AUDIO
OUT2
COMPONENT
VIDEO OUT
AUDIO
OUT1
IN
L
L
COAXIAL
C
C
B
R
S-VIDEO
OUT
R
R
COMPONENT
VIDEO
OUTPUT
VIDEO
OUT
S-VIDEO
OUT
Y
Connect one or two rear speakers.
The output sound from the rear speakers
will be monaural even if you connect two
rear speakers.
To VIDEO OUT
Video cable
To AUDIO OUT
Audio cable
To audio input
Connection example
Receiver equipped
with Dolby Pro
Logic Surround
To video input
Center speaker
Front
speaker
(left)
Front
speaker
(right)
TV
Rear speaker
(left)
Rear speaker
(right)
❏
With a receiver equipped with Dolby Digital
Connect the equipment the same way as described in “Enjoying Dolby Digital Sound” on the previous page. Refer to that
receiver’s owner’s manual and set the receiver so you can enjoy Dolby Pro Logic Surround sound.
Warning
Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL OUT jack of this DVD
player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the
speakers (Refer to “Selecting Digital Audio Output” on page 39).
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 16 CONNECTIONS
Connecting to Optional Audio System (Cont’d)
Enjoying 2 Channel Digital Stereo Sound
2 Channel Digital Stereo
You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver equipped with a
digital audio input and speaker system (right and left front speakers).
Connection example
Receiver equipped with a
digital audio input
75 ohm coaxial cable
To digital audio input
To S-video Input
or Video Input
S-Video cable
or Video cable
Front speaker
(left)
Front speaker
(right)
To S-VIDEO OUT
or VIDEO OUT
To DIGITAL OUT
DIGITAL
OUT
REMOTE
CONTROL
AUDIO
OUT2
COMPONENT
VIDEO OUT
AUDIO
OUT1
TV
IN
L
L
COAXIAL
C
C
B
R
S-VIDEO
OUT
R
R
COMPONENT
VIDEO
OUTPUT
VIDEO
OUT
S-VIDEO
OUT
Y
Enjoying DTS Sound
Introducing DTS Digital SurroundTM...the finest technology ever invented to transform existing "home theatre" systems into six
discrete channels of exceptionally clear, better-than-compact disc, digital audio performance. And DTS Digital Surround is the
only 5.1 surround sound format that can deliver this revolutionary 3-dimensional experience through new music recordings on
compact discs, original 5.1 soundtracks on motion picture laserdiscs, and soon, a wide variety of products on DVD.
Connection example
Receiver equipped
with a DTS decoder
75 ohm coaxial cable
To digital audio input
To S-video Input
or Video Input
S-Video cable
or Video cable
Front speaker
(right)
Front
speaker
(left)
To S-VIDEO OUT
or VIDEO OUT
Center
speaker
To DIGITAL OUT
DIGITAL
OUT
REMOTE
CONTROL
AUDIO
OUT2
COMPONENT
VIDEO OUT
AUDIO
OUT1
IN
L
L
COAXIAL
C
C
B
R
Sub woofer
S-VIDEO
Rear speaker
(left surround)
Rear speaker
(right surround)
OUT
R
R
COMPONENT
VIDEO
OUTPUT
VIDEO
OUT
S-VIDEO
OUT
Y
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Notes
❏
Refer to the owner’s manual of your receiver as well.
❏
❏
❏
❏
Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listen-
ing level. Otherwise, the speakers may be damaged by a sudden high volume sound.
Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the
speakers may be damaged.
When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo
jacks. To avoid possible damage to the audio system, you should take proper precautions when the AUDIO OUT jacks of the
DVD video player is connected to an amplification system. To enjoy DTS Digital Surround playback, an external 5.1 channel
DTS Digital Surround decoder system must be connected to the DIGITAL OUT jack of the DVD video player.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
PAGE 17
Basic Playback
This section shows you the basics on how to play back a DVD video disc.
Preparations
❏
❏
When you want to play back DVD video discs, turn on the TV and
select the video input source connected to the DVD player.
When you want to enjoy the sound of DVD video discs or audio
CDs from the audio system, turn on the audio system and select
the input source connected to the DVD player.
DVD PLAYER DV4200
OPEN/CLOSE
STOP
PLAY
STANDBY
STANDBY/ON
POWER
PAUSE
❏
❏
For connection details, see pages 12 through 16.
Set the playback picture size according to the aspect ratio of the
connected TV via the SETUP menu (TV Aspect).
If you do not have the necessary equipment to enjoy Dolby Digital
sound, set the Digital Audio Output (via the SETUP menu) to
“PCM”.
3
❏
POWER
OPEN/CLOSE
Press POWER.
The DVD player turns on and the power indicator
lights.
1
4
1
2
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
SUBTITLE ANGLE
TOP MENU
MENU
Press OPEN/CLOSE.
The disc tray opens.
You can open the disc tray by pressing this button even if the
2
❏
DVD player is in standby mode.
SELECT
/ENTER
Place a disc on the disc tray with the
playback side down.
There are two different disc sizes. Place the disc in the
correct guide on the disc tray. If the disc is out of the guide,
it may damage the disc and cause the DVD player to
malfunction.
3
OSD
RETURN
❏
ZOOM
SCAN
MARKER — SEARCH
SKIP
PLAY
STOP
❏
Do not place anything except 3” discs or 5” discs on the disc
tray.
PAUSE
SLOW
Press PLAY.
The disc tray is automatically closed and playback
4
1
4
7
2
5
8
0
3
begins.
6
❏
If the disc is placed in upside down (and it is a single sided
disc), “NO DISC” or “DISC ERROR” appears on the TV
screen.
9
CLEAR
PROGRAM
MP3
CD DVD
TITLE
CHP/TRK
PROG.
RANDOM ALL
A
B
Operating status indicator
❏
❏
If you insert an audio CD, the CD indicator lights up on the
display. The title number does not appear.
After playing back all of the chapters in the title, the DVD player
automatically stops and returns to the menu screen.
When a menu screen appears on the TV screen.
In case of interactive DVDs with control, a menu screen appears on
the TV screen. Perform step 5 on page 18 to start play.
Example of interactive
DVD On-Screen Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 18 BASIC OPERATION
Basic Playback (Cont’d)
Press / / /
press the numeric button(s), to select the
D E F G
and press SELECT/ENTER, or
5
desired item.
Playback of the selected item begins.
1
2
POWER
OPEN/CLOSE
OR
3
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
4
SUBTITLE ANGLE
Example of interactive DVD On-Screen Menu
TOP MENU
MENU
❏
For further information, refer to the disc jacket of the disc
you are playing.
SELECT
/ENTER
5
After operation
When the unit is not in use, remove the disc and press
POWER to turn off the DVD player.
OSD
RETURN
ZOOM
SCAN
MARKER — SEARCH
Notes
SKIP
PLAY
❏
❏
Do not move the DVD player during playback. Doing so may
damage the disc and the DVD player.
Use the OPEN/CLOSE button on the remote control or DVD
player to open and close the disc tray. Do not push the disc tray
while it is moving. Doing so may cause the DVD player to
malfunction.
Do not push up the disc tray or put any objects other than discs
on the disc tray. Doing so may cause the DVD video
player to malfunction.
Keep your fingers well clear of the disc tray as it is closing. Be
especially careful with children’s fingers around the
closing disc tray as there is a risk of personal injury.
STOP
PAUSE
SLOW
1
4
7
2
5
8
0
3
6
9
❏
❏
CLEAR
PROGRAM
❏
❏
When “
” appears on the TV screen while a button is
pressed, it means that this function is not available on the disc
you are playing.
Depending on the DVD disc, some operations may be different
or restricted. Refer to the jacket or case of the disc you are
playing.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
Stopping Play
PAGE 19
Basic Playback (Cont’d)
POWER
OPEN/CLOSE
Press STOP during playback.
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
Resume Play
SUBTITLE ANGLE
❏ When play is stopped, the unit records the point where
STOP was pressed (RESUME function).
TOP MENU
MENU
Press PLAY and play will resume from this point.
Notes
SELECT
/ENTER
❏
❏
❏
This operation works only with discs for which the elapsed play-
ing time appears in the DVD display window during stop.
Resume function will be cleared when the STOP is pressed on
the STOP mode.
OSD
RETURN
The Resume function may not be available on some DVD discs.
ZOOM
SCAN
MARKER — SEARCH
SKIP
PLAY
PLAY
Last Scene Memory
STOP
STOP
This player memorizes last scene for the last disc you have
watched. Settings remain in memory even if you remove the
disc from the player or switch off the player. If you load a disc
that has its settings memorized, Latest Stop Position is
automatically recalled.
PAUSE
SLOW
1
4
7
2
5
8
0
3
6
9
Notes
CLEAR
PROGRAM
❏
❏
❏
Settings are stored in memory for use any time.
Switching of the audio mode, etc., is automatic on some discs.
This player does not memorize if you switch off the player when
a DVD or title menu appears on the TV screen.
❏
The last scene memory function will be cleared when the STOP
is pressed on the STOP mode.
Screen Saver
The screen saver is useful to prevent your display from becom-
ing damaged.
The screen saver picture appears when you leave the DVD
player in stop mode for about 5 minutes.
Automatic power off function
After the Screen Saver has been engaged for about 5 minutes,
the DVD player will automatically turn itself off.
Screen Saver
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 20 BASIC OPERATION
Special Playback
Still Picture (Pause)
Press PAUSE during playback.
❏
DVD
The player will be placed in the still picture mode.
CD
❏
The player will be placed in the pause mode.
Frame Advance (DVD only)
Press PAUSE during still playback.
(Each time you press PAUSE, the picture advances one
frame)
POWER
OPEN/CLOSE
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
To resume normal playback, press PLAY.
SUBTITLE ANGLE
TOP MENU
MENU
Skipping Chapters and Tracks
Forward or Back
Skipping forward
SELECT
/ENTER
Press SKIP
during playback.
A chapter (DVD) or a track (CD) is skipped each time the but-
OSD
RETURN
ton is pressed.
ZOOM
SCAN
MARKER — SEARCH
Skipping back
SKIP
PLAY
Press SKIP
during playback.
PLAY
STOP
SKIP
STOP
❏
When the button is pressed once midway through a
chapter/track, the player returns to the start of that
chapter/track. When it is pressed again, a chapter/track is
skipped each time the button is pressed.
(
/
)
PAUSE
SLOW
PAUSE
1
4
7
2
5
8
0
3
6
9
CLEAR
PROGRAM
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
PAGE 21
Special Playback (Cont’d)
You can play back discs at various speeds.
To Scan at Fast Forward or Fast
Reverse Playback.
Press the SCAN
playback.
or
button during
POWER
OPEN/CLOSE
[TV screen]
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
FF
GG
X2
X2
SUBTITLE ANGLE
TOP MENU
MENU
❏
❏
The speed of advance (reverse) is relatively slow at first.
SELECT
/ENTER
When the button is pressed again, the speed becomes
faster. (Each time the button is pressed, the speed
increases up to 4 steps (DVD) or 3 steps (CD).)
The speed will be retained even after the button is
released.
OSD
RETURN
ZOOM
SCAN
MARKER — SEARCH
SKIP
PLAY
PLAY
To return to normal playback, press PLAY.
Note
STOP
SCAN
PAUSE
SLOW
(
/
)
SLOW
❏
The DVD player does not play back sound during the high
speed reverse and forward playback of DVD video discs.
However, the DVD player plays back sound during fast forward
or fast reverse playback of audio CDs.
(
F
/
)
G
V
V
1
4
7
2
5
8
0
3
6
9
❏
Subtitles do not appear on the screen during scan playback.
CLEAR
PROGRAM
Playing in Slow-Motion (DVD only)
Press SLOW
or
during playback.
F
V
V
G
The playback speed becomes 1/16 (DVD) of the normal
speed.
[TV screen]
V
G
F
V
1/16
1/16
❏
❏
The speed of slow-motion is slow at first. When the button
is pressed again, the speed becomes faster. (Each time
the button is pressed, the speed increase up to 4 steps.)
The speed will be retained even after the button is
released.
To return to normal playback, press PLAY.
Notes
❏
❏
The sound is muted during slow-motion playback.
The DVD player can not play back Audio CDs in slow motion.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 22 OPERATION USING GUI MENU ICONS
General Information about GUI Menu Icons
This unit features GUI Menu Icons showing disc
Common procedures
information (title/chapter/track number, elapsed playing
time, audio/subtitle language, angle, and sound) and
player information (repeat play, play mode, marker,
etc.). Some icons only show the indicated information.
Other icons allow the settings to be changed.
Press OSD during playback.
1
❏
Title function can be accessed from the stop mode.
Press
/
to select the desired item.
D E
2
❏
The current selected item is indicated by a yellow
frame on its GUI menu icons.
POWER
OPEN/CLOSE
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
SUBTITLE ANGLE
Press
/
to select the desired setting.
F G
3
TOP MENU
MENU
❏
When numbers are displayed (e.g. title number),
the numeric buttons can also be used for setting
instead of F/G.
SELECT
/ENTER
2, 3
❏
For some functions, the setting will be registered
immediately; for others, SELECT/ENTER must be
pressed.
OSD
RETURN
1
ZOOM
SCAN
MARKER — SEARCH
SKIP
PLAY
To clear the GUI Menu Icons, press OSD
again.
STOP
PAUSE
SLOW
Examples of GUI Menu Icons.
(The screens may differ depending on the disc contents.)
1
1
1/9
0:16:57
1
ENG
D
6 CH
CHAPT
1
0:16:57
OFF
1
A
B
STER.
OFF
NORM.
NORM.
(DVD and CD GUI)
(DVD GUI)
(CD GUI)
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION USING GUI MENU ICONS PAGE 23
Detailed Description of each GUI Menu Icon
You can view information about a disc and its operational status on the TV screen.
Press OSD during
FUNCTION
SELECTION
METHOD
playback.
(Press D/E to select desired item)
[TV screen] DVD GUI
To show the current title number
and to jump to the desired title number
/ , or
Numeric
F G
1
SELECT/ENTER
/
, or Numeric
To show the current chapter number
and to jump to the desired chapter number
F G
1
SELECT/ENTER
SKIP
To show the elapsed time
Numeric
SELECT/ENTER
and directly select scenes by the desired time.
0:16:57
To show the current audio soundtrack language,
encoding method, channel number
and to change the settings.
/ ,
1 ENG
D
6 CH
F G
AUDIO
To show the current subtitles language
/ ,
F G
SUBTITLE
OFF
1
and to change the setting.
/ ,
To show the current angle number
F G
ANGLE
and to change the angle.
/ ,
SURR.
F G
To show the current sound (NORMAL or 3D SURROUND)
NORM.
and to change the setting.
Press OSD during
playback.
[TV screen] CD GUI
SELECTION
METHOD
FUNCTION
(Press D/E to select desired item)
To show the current track number
/
, or Numeric
F G
SELECT/ENTER
SKIP
and to jump to the desired track number
1
To show the elapsed time.
(Display only)
0:16:57
To show the current audio (STEREO, LEFT, RIGHT)
/ ,
F G
STER.
and to select to the desired audio channel.
AUDIO
To show the current sound (NORMAL or 3D SURROUND)
and to change the setting (Audio CD only).
/ ,
SURR.
F G
NORM.
Note
❏
Some DVD discs may not provide all of the above GUI menu icons.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 24 ADVANCED OPERATION
Using a Title Menu
Some movie discs may contain two or more
titles. If the disc has a title menu recorded on it,
the TOP MENU button can be used to select the
movie title. (The details of operation differ
depending on the disc used.)
Press TOP MENU.
A list of the titles on the disc is displayed.
1
❏ Selecting a title may not be possible on
certain DVD discs.
Pressing TOP MENU again to resume play from the
scene when TOP MENU was first pressed.
TOP MENU
MENU
• Resume play may not be possible on certain discs.
1
SELECT
/ENTER
Press / / / and press SELECT/ENTER or
D E F G
2
2
2
PLAY, or press the numeric button(s), to
select desired title.
OSD
RETURN
ZOOM
SCAN
MARKER — SEARCH
SKIP
PLAY
STOP
PAUSE
SLOW
The selected title now starts playing.
Using a DVD Menu
Some DVDs have unique menu structures called
DVD menus. For example, DVDs programmed
with complex contents provide guide menus, and
those recorded with various languages provide
menus for audio and subtitle language. Although
the DVD menu’s contents and operation differ
from disc to disc, the following explains the basic
operation when this feature is used.
Press MENU during play.
The DVD menu available on the disc is now displayed.
1
1
2
3
4
TOP MENU
MENU
1
2
Pressing MENU again resumes play from the scene
when MENU was first pressed.
• Resume play may not be possible on certain discs.
SELECT
/ENTER
OSD
RETURN
Press / / / and press SELECT/ENTER, or
press the numeric button(s), to select desired
item.
D E F G
2
ZOOM
SCAN
MARKER — SEARCH
SKIP
PLAY
STOP
PAUSE
SLOW
1
4
7
2
5
8
0
3
6
9
CLEAR
PROGRAM
The selected item is now executed.
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED OPERATION PAGE 25
Changing Subtitle Language
It is possible to change the subtitle language to a
different language from the one selected at the initial
settings. (See page 34 for further info.)
This operation works only with discs on which multiple
subtitle languages are recorded.
Press SUBTITLE during playback.
When no subtitles are recorded, “OFF” will be
displayed instead of the language number.
1
2
SETUP
REPEAT
A-B
RANDOM
OFF
AUDIO
SUBTITLE ANGLE
SURR.
1, 2
TOP MENU
MENU
Press SUBTITLE repeatedly until the
desired language is selected.
Number of the subtitle language being played
back is shown.
Notes
❏
❏
In some cases, the subtitle language is not changed to
the selected one immediately.
When a disc supporting the closed caption is played, the
subtitle and the closed caption may overlap each other
on the TV screen. In this case, turn the subtitle off.
When the desired language is not selected even after
pressing the button several times, it means that the
language is not available on the disc.
When the power is turned on or the disc is removed,
subtitles appears in the language selected at the initial
settings. If this language is not recorded on the disc, the
disc’s priority language appears.
1
ENG
❏
❏
To eliminate the On Screen Subtitles.
Press SUBTITLE repeatedly to select OFF at step 2.
Changing Audio Soundtrack Language
It is possible to change the audio soundtrack language
(or encoding method, channel number) to a different
language from the one selected at the initial settings in
case of DVD disc. (See page 34 for further info.) This
operation works only with discs on which multiple
audio soundtrack languages are recorded.
• DVD
Press AUDIO during play.
Number of the audio soundtrack language being
1
played back.
1
ENG
D
6 CH
And it is possible to change the audio channel in case
of audio CD.
Press AUDIO repeatedly until the
desired language (or encoding method,
channel number) is selected.
2
SETUP
REPEAT
A-B
RANDOM
AUDIO
SUBTITLE ANGLE
SURR.
1, 2
TOP MENU
MENU
2
FRE
D
6 CH
• CD
Press AUDIO during play.
1
Notes
❏
❏
When the desired language is not selected even after
pressing the button several times, it means that the
language is not available on the disc.
When the power is turned on or the disc is removed, the
language heard is the one selected at the initial settings.
If this language is not recorded on the disc, only the
available language on the disc will be heard.
STER.
Press AUDIO repeatedly until the
desired sound is selected.
2
❏
Some discs may not respond to Audio feature.
LEFT
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 26 ADVANCED OPERATION
Viewing from another Angle
Some DVDs may contain scenes which have been
shot simultaneously from a number of different angles.
For these discs, the same scene can be viewed from
each of these different angles using the ANGLE button.
(The recorded angles differ depending on the disc
used.)
Press ANGLE during playback.
1
Number of angle
1
being played back.
Press ANGLE repeatedly until the
desired angle is selected.
2
1
2
3
2
For your reference
•
The ANGLE indicator will blink in the DVD display win-
dow at scenes recorded at different angles to indicate
that angle switching is possible.
POWER
OPEN/CLOSE
•
The angle number can be programmed beforehand; the
angle will be switched to the selected number when the
ANGLE indicator blinks.
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
SUBTITLE ANGLE
1, 2
Note
TOP MENU
MENU
❏
This function only works for discs having scenes recorded
at different angles.
Producing a 3D Surround Effect
This unit can produce a 3D Surround effect, using 3D
Surround Sound technology, which simulates multi-chan-
nel audio playback from two conventional stereo speak-
ers instead of the five or more speakers normally
required to listen to multi-channel audio from a home
theatre. This feature works with DVD discs encoded with
Dolby Pro Logic and Dolby Digital audio tracks.
Press SURR. during playback.
Each time this button is pressed, the TV screen
display changes.
1
NORM.
Press SURR. repeatedly until the
desired sound is selected.
2
3D SUR
POWER
OPEN/CLOSE
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
Notes
❏
❏
This 3D Surround effect may not be available on some
DVD discs, such as those recorded with a mono audio
soundtrack.
Turn off the TV surround sound and other surround
effects when using this 3D surround effect.
For best 3D Surround effect using only two speakers it is
recommended that the two speakers be positioned
approximately 8’ to 10’ apart, and the listening
position should be 8’ to 10’ away from the speakers.
SUBTITLE ANGLE
1, 2
TOP MENU
MENU
❏
SELECT
/ENTER
OSD
RETURN
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED OPERATION PAGE 27
Repeat Play
Repeating viewing (listening)
Press REPEAT during playback.
Each time this button is pressed, the TV screen
changes as shown below and the disc will repeat a
chapter or title (DVD) or a track (CD).
Repeating sections between two
specific points (A-B repeat)
Press A-B during play at the point where
1
repeat play is to start (A).
A
*
• DVD
Repeat of
chapter being
played
• You can select “OFF” at this step by pressing
CLEAR.
CHAPT
Press A-B during play at the point where
repeat play is to be concluded (B).
TITLE
Repeat of title
being played
2
OFF
Cancel repeat mode
(normal play)
A
B
Repeat play of the selection between points A
and B starts.
• CD
Repeat of track
TRACK
being played
To return to normal play
Press A-B once “OFF” is displayed.
ALL
Repeat of entire
disc contents
OFF
OFF
Cancel repeat mode
(normal play)
Notes
❏
Repeat play works only with discs for which the elapsed
playing time appears in the DVD display window during
playback.
Repeat play may not work correctly with some DVDs.
A-B repeat play works only within a title DVD or a track
CD.
To enjoy program repeat play (CD)
If REPEAT is pressed during program play, repeat play
is operated as below.
❏
❏
Repeat of the
TRACK
current programmed
track
❏
Some subtitles recorded around point A or B may fail to
appear (DVD).
ALL
Repeat of all programs
OFF
Cancel repeat mode
(Program play)
To return to normal play
Press REPEAT several times until “OFF” is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 28 ADVANCED OPERATION
Storing Markers in Memory to be Viewed (Listened to) again
Storing a MARKER in the DVD memory is similar
to marking your page in a book. It allows you to
quickly return to any point on the disc.
Storing a marker in the memory
Press MARKER during play at the starting
point to be viewed (listened to) again.
1
1/9
Indicates “1/9” is stored in the memory.
Up to 9 marks can be stored in the memory.
Recalling/Clearing a marker
POWER
OPEN/CLOSE
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
Press SEARCH during playback.
The MARKER SEARCH menu will appear on the TV
2
SUBTITLE ANGLE
screen.
TOP MENU
MENU
MARKER SEARCH
1 2 3 4 5 6 7 8 9
4
3
SELECT
/ENTER
Press F/G to select the marker to be
recalled/cleared.
OSD
RETURN
3
ZOOM
SCAN
MARKER — SEARCH
1
4
2
SKIP
PLAY
Press SELECT/ENTER to recall a marker.
Or press CLEAR to clear a marker.
Play resumes from the point corresponding to the
selected marker, or the selected marker is cleared.
4
STOP
PAUSE
SLOW
1
4
7
2
5
8
0
3
6
9
Notes
❏
These operations work only with discs for which the elapsed
playing time appears in the DVD display window during playback
or stop.
Some subtitles recorded around the marker may fail to appear
(DVD).
All the markers are cleared when the power is turned off or the
disc is removed.
The marker is not stored when the DVD or title menu is
CLEAR
PROGRAM
❏
❏
❏
displayed on the TV screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED OPERATION PAGE 29
Zoom Feature
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
Press ZOOM during playback or still
1
playback to activate the Zoom function.
If you further press ZOOM repeatedly, the magnification
level increases (6 steps).
TOP MENU
MENU
Press D/E/F/G buttons to move through
the zoomed picture.
2
3
SELECT
/ENTER
2
1
Press CLEAR to resume normal play-
back.
OSD
RETURN
ZOOM
SCAN
MARKER — SEARCH
SKIP
PLAY
Notes
STOP
❏
❏
Some discs may not respond to the Zoom feature.
Zoom does not work on subtitles or menus included on
DVD video discs.
PAUSE
SLOW
1
4
7
2
5
8
0
3
6
9
CLEAR
PROGRAM
3
Random Play
Note: This function only works with karaoke DVD and
Audio CD. Random does not work with DVD movie
discs.
Random play (Karaoke DVD or CD)
Press RANDOM during normal playback
or stop mode.
1
You can playback titles or tracks in random order.
(Random playback)
The DVD player automatically selects the titles on a
DVD video karaoke disc only and plays them back
randomly.
The DVD player automatically starts random
playback and the RANDOM indicator in the DVD
display window appears.
To resume normal playback, press
RANDOM.
2
POWER
OPEN/CLOSE
The RANDOM indicator in the DVD display
window disappears.
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
1, 2
SUBTITLE ANGLE
Notes
TOP MENU
MENU
❏
❏
Random playback may not be possible on certain discs.
If you press the SKIP or button during random
playback, the DVD player goes to another track
randomly and starts playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 30 ADVANCED OPERATION
Program Play
The player plays the tracks on the disc in the
order you specify.
Press PROGRAM on the stop mode.
The program playback screen appears on the TV
screen.
1
Note: Program play function is possible only
with audio CDs. It does not work with DVD
movie discs.
Program
Step
1
Total Time
0:00:00
Clear All
• To exit the screen, press PROGRAM or RETURN.
POWER
OPEN/CLOSE
Press D/E/F/G and press the numeric
button(s), to select the desired track number.
2
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
SUBTITLE ANGLE
Program
TOP MENU
MENU
Step
Total Time
0:08:32
8
1
5
19
2, 3
SELECT
/ENTER
OSD
RETURN
Clear All
ZOOM
SCAN
MARKER — SEARCH
• Repeat step 2 to select another track.
SKIP
PLAY
• Up to 20 tracks can be programmed.
5
STOP
Press PLAY to exit the screen.
PAUSE
SLOW
3
The selected track is stored in the memory and play
now begins in the programmed sequence.
1
4
7
2
5
8
0
3
6
9
After playback of all tracks programmed
Play is stopped.
2, 3
1
CLEAR
PROGRAM
Clearing the program
❏ To clear the programmed tracks one by one
Press D/E/F/G to select the unwanted number and then
press CLEAR.
❏ To clear all the programmed tracks
Press D/E/F/G to select “Clear All” and then press
SELECT/ENTER. Press PROGRAM or RETURN to exit the
screen. (The programs are also cleared when the power is
turned off or the disc is removed.)
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED OPERATION PAGE 31
Playback with MP3
To play an MP3 file
TOP MENU
MENU
Load an MP3 disc.
The MP3 menu is displayed.
1
MP3
Program
SELECT
/ENTER
MP3-1
2
TRACK 1.mp3
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
TRACK 9.mp3
OSD
RETURN
ZOOM
SCAN
MARKER — SEARCH
SKIP
PLAY
2
STOP
Clear All
Press D/E button to select the desired MP3
file and then press PLAY to start playback of
the file.
2
To play an MP3 file repeatedly
❏
❏
❏
If you press REPEAT once during play, the
current MP3 file will play repeatedly.
If you press REPEAT twice during play, the all
MP3 files on the disc will play repeatedly.
If you press REPEAT three times, the repeat
play will be cancelled.
MP3
Program
MP3-1
TRACK 1.mp3
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
TRACK 9.mp3
MP3
MP3
Progr
Prog
MP3-1
MP3-1
Clear All
TRACK 1.mp3
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
TRACK 9.mp3
TRACK 1.mp3
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
TRACK 9.mp3
For your reference
•
Press SKIP
or SKIP
to play the next file or previous
file during playback.
•
•
Press OSD to move to the next page.
Press PAUSE to enter the pause mode, press PLAY or
PAUSE again to return to normal playback.
Press STOP to stop the playback.
REPEAT symbol
•
Notes
❏ The file name is only displayed in English.
❏ If there is an impossible code to display, it will be
displayed underlined (_) instead of English.
❏ This unit can play up to 200 files per disc. A disc
recorded with more than 200 files cannot be played.
❏ Disc format is compatible with ISO9660 only.
❏
If you record MP3 files using the software which cannot
create a FILE SYSTEM, for example “Direct-CD” etc., it
is impossible to playback MP3 files. We therefore
recommend that you use “Easy-CD Creator”, which
creates an ISO9660 file system.
❏ A single session disc requires MP3 files in the first
track. If there is no MP3 file in the 1st track, it cannot
playback MP3 files. If you wish to playback MP3 files,
format all the data in the disc or use a new one.
❏ If there are already data files which are not MP3 files
on the CD-R disc, please, do not use that disc; use a
new one instead. However, if the disc is a CD-RW disc,
this does not apply.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 32 ADVANCED OPERATION
Playback with MP3 (Cont’d)
To program play an MP3 file
TOP MENU
MENU
Load an MP3 disc.
The MP3 menu is displayed.
1
SELECT
/ENTER
4
Press STOP to stop playback
.
2
OSD
RETURN
Press PROGRAM to enter the Program Edition
ZOOM
SCAN
MARKER — SEARCH
3
mode in the stop mode.
SKIP
PLAY
E
The
mark appears on the right of the word Program
5
2
STOP
on the right side of MP3 menu.
Press RETURN to exit the Program Edition mode, the
PAUSE
SLOW
E
mark will disappear.
1
4
7
2
5
8
0
3
Press D/E to select the desired MP3 file and
then press SELECT/ENTER to add the MP3
file to the program list.
• Repeat steps 4 to select another track.
• Up to 60 files can be programmed.
4
6
9
CLEAR
PROGRAM
3
MP3
Program
E
MP3-1
TRACK 2.mp3
TRACK 7.mp3
TRACK 6.mp3
TRACK 9.mp3
TRACK 1.mp3
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
TRACK 9.mp3
To play an MP3 file repeatedly
❏
If you press REPEAT button once during play,
the current MP3 file will play repeatedly.
If you press REPEAT button twice during play,
the all MP3 files on the program list will play
repeatedly.
❏
Clear All
❏
If you press REPEAT button three times, the
repeat play will be cancelled.
Press PLAY to play.
The playback now begins in the programmed
5
Program
Program
sequence.
TRACK 2.mp3
TRACK 7.mp3
TRACK 6.mp3
TRACK 9.mp3
TRACK 2.mp3
TRACK 7.mp3
TRACK 6.mp3
TRACK 9.mp3
MP3
Program
MP3-1
TRACK 2.mp3
TRACK 7.mp3
TRACK 6.mp3
TRACK 9.mp3
TRACK 1.mp3
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
TRACK 9.mp3
Clear All
Clear All
REPEAT symbol
Clear All
Clearing the program
If you want to enter the main menu, press F button.
❏ To clear the program one by one
After playback all tracks programmed
Play is stopped.
In the Program Edition mode, press D/E/F/G to
select the unwanted MP3 file on the program list
and then press CLEAR.
❏ To clear all the programs
In the Program Edition mode, press D/E/F/G to
select the “Clear All” and press SELECT/ENTER.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS PAGE 33
Selection of Initial Settings
Once the initial settings have been completed,
the player can always be operated under the
same conditions (especially with DVD discs).
The settings will be retained in the memory until
they are changed, even if the power is switched
off.
Selection of initial settings
Press SETUP in the stop or playback mode.
The SETUP menu is displayed.
1
Original
English
Disc Audio
Disc Subtitle
Disc Menu
French
Rating
German
Spanish
Italian
Password
TV Aspect
Menu Language
Digital Audio Output
Chinese
Polish
Hungarian
Russian
Other — — — —
POWER
OPEN/CLOSE
Others
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
1
Press D/E to select the desired item.
The screen will show the current setting for the
selected item, and the alternate setting(s).
SUBTITLE ANGLE
2
TOP MENU
MENU
• Disc Audio (see page 34.)
• Disc Subtitle (see page 34.)
• Disc Menu (see page 34.)
• Rating (see page 35.)
SELECT
/ENTER
2, 3
OSD
RETURN
• Password (see page 36.)
• TV Aspect (see page 37.)
• Menu Language (see page 38.)
• Digital Audio Output (see page 39.)
• Others (see page 40.)
ZOOM
SCAN
MARKER — SEARCH
SKIP
PLAY
STOP
PAUSE
SLOW
Press G and then D/E to select the desired
setting and press SELECT/ENTER.
• Some items require additional steps. (See the
respective page.)
3
1
4
7
2
5
8
0
3
6
9
When the alternate setting is selected the screen returns to
the Initial Settings display.
CLEAR
PROGRAM
To exit SETUP menu
Press SETUP, RETURN or PLAY.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 34 INITIAL SETTINGS
Selecting Disc Languages
This is to select the audio soundtrack language,
subtitle language and the language used in title
menus or DVD menus which will always be used
for every disc to be played back.
At the setup screen, press D/E to select
1
“Disc Audio” and press G.
Original
English
Disc Audio
When you play back a DVD video disc, the DVD
player automatically displays the pre-selected
subtitle language if it is included on the disc.
Disc Subtitle
Disc Menu
French
Rating
German
Spanish
Italian
Password
TV Aspect
Menu Language
Digital Audio Output
Chinese
Polish
Hungarian
Russian
Other — — — —
Others
POWER
OPEN/CLOSE
Press D/E to select the desired language and
then press SELECT/ENTER.
2
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
SUBTITLE ANGLE
Original
English
Disc Audio
Disc Subtitle
Disc Menu
TOP MENU
MENU
French
Rating
German
Spanish
Italian
Password
SELECT
/ENTER
TV Aspect
1, 2
Menu Language
Digital Audio Output
Chinese
Polish
OSD
RETURN
Hungarian
Russian
Other — — — —
ZOOM
SCAN
MARKER — SEARCH
Others
SKIP
PLAY
Original :The original language of each disc will be selected.
English : The English will be Selected.
Other : Another language can be selected. You can input
4-digit language code. (Refer to the language
codes on page 41. Press CLEAR if an incorrect
language code is entered.)
STOP
PAUSE
SLOW
1
4
7
2
5
8
0
3
6
9
The “Disc Subtitle” and “Disc Menu” are selected by the
same method.
CLEAR
PROGRAM
Note
❏
If the language selected is not available on the disc, the original
language designated by each disc will be selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS PAGE 35
Selecting Rating Level and Password
This is to prohibit the playing of specified
DVDs which are unsuitable for children.
❏ Some DVD discs contain a restriction level
which enables parents to remove scenes or
prevent playback of discs by children. DVD
players are equipped with a password
designed to prevent children from changing
the level.
Selecting rating level (DVD only)
At the SETUP screen, press D/E to select
“Rating” and press G.
1
8
Disc Audio
Disc Subtitle
Disc Menu
7
6
Rating
5
Password
4
TV Aspect
3
Menu Language
Digital Audio Output
2
1
Unlock
POWER
OPEN/CLOSE
Others
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
SUBTITLE ANGLE
Press D/E to select the desired level and
press SELECT/ENTER.
2
TOP MENU
MENU
8 Blocked
Disc Audio
SELECT
/ENTER
Disc Subtitle
Disc Menu
7 Blocked
1, 2
6
Rating
5
OSD
RETURN
Password
4
TV Aspect
3
ZOOM
SCAN
MARKER — SEARCH
Menu Language
Digital Audio Output
.ekeep
2
SKIP
PLAY
1
Unlock
STOP
PAUSE
SLOW
Others
1
4
7
2
5
8
0
3
6
9
You cannot play DVD video discs rated higher than the level
you selected unless you cancel the parental lock function.
For example, when you select level 7, discs rated higher than
level 7 are blocked and cannot be played.
CLEAR
PROGRAM
The parent lock level is equivalent to the following USA movie
ratings.
Level 7: NC-17
Level 3: PG
Level 6: R
Level 1: G
Level 4: PG 13
• Some titles do not match with the rating level described as
above.
If you change the level and enter a password, playback of all
DVDs with ratings higher than your selection will be blocked,
unless the correct password is entered again. For example: if
you change the level to “5”, the DVD player will not play discs
with ratings of “6”, “7” or “8” unless the correct password is
entered on the remote control.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 36 INITIAL SETTINGS
Selecting Rating Level and Password (Cont’d)
Setting your password (DVD only)
If you change the rating level to “7” or lower, you must enter
a 4-digit “password” to prevent playback of discs with higher
ratings.
POWER
OPEN/CLOSE
At the SETUP screen, press E to select
1
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
“Password” and press G.
SUBTITLE ANGLE
New
Disc Audio
TOP MENU
MENU
Disc Subtitle
Disc Menu
— — — —
Rating
Password
TV Aspect
SELECT
/ENTER
1, 2
Menu Language
Digital Audio Output
OSD
RETURN
Others
ZOOM
SCAN
MARKER — SEARCH
SKIP
PLAY
Input a 4-digit password and press
SELECT/ENTER.
Example : 1234
2
3
STOP
PAUSE
SLOW
Do not forget your password.
Input the 4-digit password again and press
SELECT/ENTER to verify.
Setting is finished.
1
4
7
2
5
8
0
3
6
9
❏ The rating is locked. Any disc whose rating is higher than
the setting, cannot be played back unless the correct
password is entered.
CLEAR
PROGRAM
To change/clear memorized password
At the SETUP screen, press E to select
1
“Password” and press G.
Input your password and press
SELECT/ENTER.
2
To clear your 4-digit password
If you forget your password, to clear the
current password, follow the procedure below.
Change
Clear
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
1 Press SETUP.
TV Aspect
The SETUP menu is displayed.
Menu Language
Digital Audio Output
2 Enter 6-digit number “210499” by
pressing number buttons.
Others
The 4-digit password is cleared. “P CLr”
appears on the display.
To change or clear your password, press D/E
to select the “Change” or “Clear” and press
SELECT/ENTER.
3
3 Enter a new password.
Refer to “Setting your password” section on the
right.
To change the rating level/password, follow the steps on
page 35-36 again.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS PAGE 37
Selecting TV Aspect
Select the appropriate screen type according to
your TV set; conventional size screen (4:3) or
wide-screen (16:9).
At the SETUP screen, press D/E to select “TV
1
Aspect” and press G.
4:3 Letterbox
4:3 Panscan
16:9 Wide
Disc Audio
Disc Subtitle
Disc Menu
Rating
POWER
OPEN/CLOSE
Password
TV Aspect
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
Menu Language
Digital Audio Output
SUBTITLE ANGLE
TOP MENU
MENU
Others
SELECT
/ENTER
1, 2
Press D/E to select the desired Aspect and
press SELECT/ENTER.
2
OSD
RETURN
ZOOM
SCAN
MARKER — SEARCH
4:3 Letterbox
4:3 Panscan
16:9 Wide
Disc Audio
SKIP
PLAY
Disc Subtitle
Disc Menu
STOP
Rating
PAUSE
SLOW
Password
TV Aspect
Menu Language
Digital Audio Output
1
4
7
2
5
8
0
3
6
9
Others
CLEAR
PROGRAM
4:3 Letterbox : The video material not formatted in the Pan
& Scan style is played back in the letterbox style (black
bands appear at top and bottom of screen).
4:3 Panscan : Select when a conventional TV set is
connected. The video material formatted in the Pan & Scan
style is played back in that style (the left and right edges are
cut off).
16:9 Wide : Select when a wide-screen TV set is connected.
Played in “FULL” size. (Setting the wide-screen TV to “FULL”
mode is also necessary.)
4:3 Letterbox
Cut Off
* Each screen shows an example when the video material
for a wide-screen is played.
(This setting does not affect the video material for
conventional size.)
4:3 Panscan
16:9 Wide
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 38 INITIAL SETTINGS
Selecting Menu Language
Selects language for SETUP menus and displays
on the TV.
At the SETUP screen, press D/E to select
1
“Menu Language” and press G.
English
Spanish
French
Disc Audio
Disc Subtitle
Disc Menu
POWER
OPEN/CLOSE
Rating
Password
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
TV Aspect
Menu Language
Digital Audio Output
SUBTITLE ANGLE
TOP MENU
MENU
Others
SELECT
/ENTER
1, 2
Press D/E to select the desired Language and
press SELECT/ENTER.
2
OSD
RETURN
ZOOM
SCAN
MARKER — SEARCH
English
Spanish
French
Disc Audio
SKIP
PLAY
Disc Subtitle
Disc Menu
STOP
Rating
PAUSE
SLOW
Password
TV Aspect
Menu Language
Digital Audio Output
1
4
7
2
5
8
0
3
6
9
Others
CLEAR
PROGRAM
Setting Remote Control Codes
• This DVD player support two remote control codes : C1
and C2.
• When the unit is shipped from the factory, the remote code
is set to C1.
• To change the remote control cods, press and hold CLEAR
button for at least five seconds.
• Changed Remote control codes is displayed in the Display
window.
1
4
2
5
8
0
3
6
7
9
CLEAR
PROGRAM
CLEAR
• Set the remote control codes of the Remote control to the
same setting (page 10).
Note
❏
❏
This setting can not be used if a disc is playing.
If a DVD has been loaded, be sure to press STOP twice
before proceeding.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS PAGE 39
Selecting Digital Audio Output
Each DVD disc has a variety of audio output
options. Set the player’s Digital Audio Output
according to the type of audio system you use.
At the SETUP screen, press D/E to select
Digital Audio Output and press G.
1
DOLBY
DIGITAL /PCM
Stream/PCM
PCM
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
Sample Freq.
48 KHz
POWER
OPEN/CLOSE
TV Aspect
Menu Language
Digital Audio Output
96KHz
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
SUBTITLE ANGLE
Others
TOP MENU
MENU
Press D/E to select the desired output and
2
press SELECT/ENTER.
SELECT
/ENTER
1, 2
You can select Digital Audio Output or Sampling
Frequency item by pressing SELECT/ENTER.
OSD
RETURN
❏
Digital Audio Output
ZOOM
SCAN
MARKER — SEARCH
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM” if
an active digital output is supplied to a Dolby Digital decoder,
(or an amplifier or other equipment with Dolby Digital
decoder).
SKIP
PLAY
STOP
PAUSE
SLOW
Stream/PCM: Select “Stream/PCM” if an active
digital output is supplied to an amplifier or other
equipment with DTS decoder, Dolby Digital decoder and
MPEG decoder.
1
4
7
2
5
8
0
3
6
9
PCM: Select “PCM” if an active digital output is
supplied to an amplifier or other equipment with linear PCM
only (or MD recorder or DAT deck).
CLEAR
PROGRAM
❏
Sampling Frequency
To change the Sample Frequency setting, first select the
desired digital audio output type as indicated above.
If your A/V receiver or surround processor is NOT capable of
handling 96kHz signals, select the 48kHz option. When this
choice is made, this unit will automatically convert any 96kHz
signals to a 48kHz output so that your system is capable of
decoding them.
If your A/V receiver or surround processor is capable of
handling 96kHz signals, select the 96kHz option. When this
choice is made, this unit will pass each type of signal through
without any further processing.
OUTPUT
Playback
Disc
Stream/PCM
Dolby Digital/
PCM
PCM only
96 kHz
PCM
PCM
PCM
Linear PCM
DVD
Notes
DTS DVD
❏
❏
If an active digital audio output signal is supplied to a receiver or
other equipment without a corresponding digital decoding capa-
bility, a very loud noise may be produced which could
permanently damage the speakers.
The DTS DVD disc sound is played back only when the DVD
player is connected to a receiver with a DTS decoder.
DTS bit Stream
DTS bit Stream
DTS bit Stream
PCM
Dolby Digital
DVD
Dolby Digital
bit Stream
Dolby Digital
bit Stream
MPEG DVD
Audio CD
MPEG bit Stream PCM
PCM
PCM
PCM
PCM
DTS Audio CD
DTS bit Stream
DTS bit Stream
DTS bit Stream
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 40 INITIAL SETTINGS
Others
The DRC, Vocal and Video settings can be
changed.
At the SETUP screen, press D/E to select
1
“Others” and press G.
DRC Off
Vocal On
Disc Audio
Disc Subtitle
Disc Menu
POWER
OPEN/CLOSE
Video On
Rating
Password
SETUP
AUDIO
REPEAT
A-B
RANDOM
SURR.
TV Aspect
Menu Language
Digital Audio Output
5.pakr Setup
SUBTITLE ANGLE
TOP MENU
MENU
Others
SELECT
/ENTER
1, 2
Press D/E to select the desired items and
press SELECT/ENTER.
2
OSD
RETURN
The setting of the selected item are changed between
On and Off.
ZOOM
SCAN
MARKER — SEARCH
SKIP
PLAY
❏
DRC (Dynamic Range Compression) On/Off
On: Select this option to turn on the Dynamic Range
Compression circuitry so that the dialogue remains
clear even at low volume levels.
STOP
PAUSE
SLOW
Off: Select this option to turn off the Dynamic Range
Compression and have the soundtrack presented
exactly as it was created.
1
4
7
2
5
8
0
3
6
9
❏
❏
Vocal On/Off
Set to On only when a multi-channel karaoke DVD is
being played. The karaoke channels on the disc will then
be mixed into a normal stereo sound.
CLEAR
PROGRAM
Video On/Off
Setting this option to Off is one of the best ways to
achieve optimum sound quality from Audio CD playback
and video output will be cut.
Notes
About DRC (Dynamic Range Compression)
With the DVD format you have the opportunity to hear a
program’s soundtrack in the most accurate and realistic
presentation possible, thanks to the use of digital audio
technology. However, in certain instances you may wish to
slightly compress the dynamic range of the audio output
(the difference between the loudest sounds and the
quietest ones) so that you may listen to a movie at a lower
volume without losing dialogue intelligibility.
❏
❏
❏
The DRC function works only during playback of Dolby Digital
recorded discs.
The level of Dynamic Range Compression may differ depending
on the DVD disc.
When playing karaoke, connect appropriate audio equipment
(such as an amplifier) to the DVD video player.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS PAGE 41
Table of Language and Their Abbreviations
Enter the appropriate code number for the initial settings “Audio”, “Subtitle” and/or “Menu” (See page 34).
Code
Language
Code
Language
Code
Language
Code
Language
6565 Afar
7079 Faroese
7082 French
7089 Frisian
7678 Lingala
8375 Slovak
8376 Slovenian
8377 Samoan
8378 Shona
8379 Somali
8381 Albanian
8382 Serbian
8385 Sundanese
8386 Swedish
8387 Swahili
8465 Tamil
6566 Abkhazian
6570 Afrikaans
6577 Ameharic
6582 Arabic
7679 Laothian
7684 Lithuanian
7686 Latvian, Lettish
7771 Malagasy
7773 Maori
7165 Irish
7168 Scots Gaelic
7176 Galician
7178 Guarani
7185 Gujarati
7265 Hausa
6583 Assamese
6588 Aymara
6590 Azerbaijani
6665 Bashkir
6669 Byelorussian
6671 Bulgarian
6672 Bihari
7775 Macedonian
7776 Malayalam
7778 Mongolian
7779 Moldavian
7782 Marathi
7273 Hindi
7282 Croatian
7285 Hungarian
7289 Armenian
7365 Interlingua
7378 Indonesian
7383 Icelandic
7384 Italian
7783 Malay
8469 Telugu
8471 Tajik
6678 Bengali; Bangla
6679 Tibetan
6682 Breton
7784 Maltese
7789 Burmese
7865 Nauru
8472 Thai
8473 Tigrinya
8475 Turkmen
8476 Tagalog
8479 Tonga
8482 Turkish
8484 Tatar
6765 Catalan
6779 Corsican
6783 Czech
7869 Nepali
7876 Dutch
7387 Hebrew
7465 Japanese
7473 Yiddish
7487 Javanese
7565 Georgian
7575 Kazakh
7576 Greenlandic
7577 Cambodian
7578 Kannada
7579 Korean
7583 Kashmiri
7585 Kurdish
7589 Kirghiz
7879 Norwegian
7982 Oriya
6789 Welsh
6865 Danish
6869 German
6890 Bhutani
6976 Greek
8065 Panjabi
8076 Polish
8487 Twi
8083 Pashto, Pushto
8084 Portuguese
8185 Quechua
8277 Rhaeto-Romance
8279 Rumanian
8285 Russian
8365 Sanskrit
8368 Sindhi
8575 Ukrainian
8582 Urdu
6978 English
6979 Esperanto
6983 Spanish
6984 Estonian
6985 Basque
7065 Persian
7073 Finnish
7074 Fiji
8590 Uzbek
8673 Vietnamese
8679 Volapük
8779 Wolof
8872 Xhosa
8979 Yoruba
9072 Chinese
9085 Zulu
8372 Serbo-Croatian
8373 Singhalese
7665 Latin
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 42 REFERENCE
Disc Requirements/Copyright Information
Playable Discs
This DVD player can play back the following discs.
Disc mark
Contents
Disc size
Maximum playback time
Approx. 4 hours (single sided disc)
Approx. 8 hours (double sided disc)
Approx. 80 minutes (single sided disc)
Approx. 160 minutes (double sided disc)
74 minutes
12 cm
Audio+Video
(moving pictures)
DVD video discs
Audio CDs
8 cm
12 cm
8 cm
Audio
20 minutes
In addition, this unit can play back a CD-R or CD-RW that contains audio titles or MP3 files.
You cannot playback discs other than those listed above. (Video CD, HDCD, CD-ROM, CD-Extra, CD-G, photo CD,
and CD-i discs can not be played on this DVD player.)
Region Management Information
Region Management Information: This DVD Player is designed and manufactured to respond to the Region
Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does
not correspond to the Region number of this DVD player, this DVD player cannot play that disc.
1
The Region number of this DVD player is 1.
Notes on Unauthorized Discs
You may not be able to play back some DVD video discs on this player if they were purchased from outside your
geographic area or made for business purposes.
When you try to play back an unauthorized disc, “Check Regional Code” appears on the TV screen.
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, and rent copyrighted material
without permission.
DVD video discs are copy protected, and any recordings made from these discs will be distorted.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCE PAGE 43
Before Calling Service Personnel
Symptoms and Correction
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
Symptom
No power.
• The power cord is disconnected.
• Plug the power cord into the wall outlet
securely.
• No disc is inserted.
• Insert a disc. (Check that the DVD or,
audio CD indicator in the DVD display is
lit.)
The power is on, but
the DVD player does
not work.
• The TV is not set to receive DVD signal • Select the appropriate video input mode
No picture.
output.
on the TV so the picture from the DVD
player appears on the TV screen.
• The video cable is not connected
securely.
• Connect the video cable into the jacks
securely.
• The connected TV power is turned off.
• Turn on the TV.
No sound.
• The equipment connected with the
audio cable is not set to receive DVD
signal output.
• Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
• The audio cables are not connected
securely.
• Connect the audio cable into the jacks
securely.
• The power of the equipment connected
with the audio cable is turned off.
• Turn on the equipment connected with
the audio cable.
• The Digital Audio Output is set to the
wrong position.
• Set the Digital Audio Output to the correct
position, then turn on the DVD player
again by pressing the POWER button.
The playback picture is poor. • The disc is dirty.
• Clean the disc.
• No disc is inserted.
• Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display is
lit.)
The DVD player does
not start playback.
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc
type, color system and Regional code.)
• The disc is placed upside down.
• The disc is not placed within the guide.
• Place the disc with the playback side
down.
• Place the disc on the disc tray correctly
inside the guide.
• The disc is dirty.
• Clean the disc.
• A menu is on the TV screen.
• Press the SETUP button to turn off the
menu screen.
• The Rating level is set.
• Cancel the Rating function or change
the rating level.
The remote control
does not work properly.
• The remote control is not pointed at the • Point the remote control at the remote
remote sensor of the DVD player.
sensor of the DVD player.
• The remote control is too far from the
DVD player.
• Operate the remote control within about
17 ft (5 m).
• There is an obstacle in the path of the
• Remove the obstacle.
remote control and the DVD player.
• The batteries in the remote control are
• Replace the batteries with new ones.
exhausted.
• Remote control code is different
between the DVD player and Remote
control.
• Set the remote control codes of both
DVD player and Remote control to the
same setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 44 REFERENCE
Specifications
DVD player/Outputs/Supplied Accessories
Power supply
AC 120V, 60 Hz
Power consumption
Weight
16 W
7.1 lbs (3.2 kg)
External dimensions (W X H X D)
Signal system
17.3” X 3.5” X 10.0” (440 x 88 x 254 mm)
NTSC
Laser
Semiconductor laser, wavelength 650 nm (DVD), 780 nm (CD)
Frequency range (audio)
DVD: fs = 96 kHz 4 Hz - 44 kHz
fs = 48 kHz 4 Hz - 22 kHz
CD: 4 Hz - 20 kHz
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Wow and flutter
More than 105 dB (EIAJ)
More than 100 dB (EIAJ)
0.003 %
Below measurable level (less than + 0.001 % (W.PEAK)) (EIAJ)
Temperature: 41°F to 95°F, Operation status: Horizontal
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1
(C) 0.286 V (p-p), 75 Ω
Operating conditions
Video output
S-video output
Component video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(CB)/(CR) 0.7 V (p-p), 75 Ω
Audio output (digital audio)
Audio output (analog audio)
0.5 V (p-p), 75 Ω, RCA jack x 1
2.0 Vrms(1 KHz, 0 dB), 330 Ω, RCA jack (L, R) x 2
❏
❏
❏
❏
❏
Video cable ................................................................................................1
Audio cable ................................................................................................1
Syatem Control cable.................................................................................1
Remote control...........................................................................................1
Batteries.....................................................................................................2
❏❏Designs and specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
COUNTRY
ALGERIE
ARMENIA
AUSTRALIA
AUSTRIA
BAHREIN
BANGLADESH
BELGIUM
BULGARIA
CANADA
COMPANY
Azur 2000
NGYIG Ltd.
Jamo Australia Pty. Ltd.,
Huber & Prohaska GmbH
Ambassador Stores
Target
Van der Heyden Audio N.V.
Ariescommerce GmbH
Lenbrook Industries Limited
ADDRESS
8, Lotissement Ben Hatadi, Alger, Algerie
47 A/75 St. Lalaiants, 375000 Yerevan, Armenia
24 Lionel Road, Mt. Waverley, VIC 3149, Australia
Taborstraße 95 / Ladestraße 1, Gebäude Hangartner, A-1200 Wien, Austria
P.O. Box 237,141, Government Avenue, Manama,Bahrein
1078, Ramjoy Mohanja Lane Asadgonj, Chittagong 4000, Bangladesh
Brusselbaan 278, 9320 Erembodegem, Belgium
Makedonia Blvd. 16, 1606 Sofia, Bulgaria
633 Granite Court, Pickering, Ontario
CHINA
Guang Chang Audio International Co., Ltd. No.38 Yushan Road, ShiQiao, Pan Yu, Guang Dong, China
CYPRUS
Empire Hifi systems Ltd.
Audio International
Audio Nord
P.O. Box 5604, Nicosia, Cyprus
Sokolska 41, 67902 Rajecko, OKR,Blansko, Czech Republic
Dali Allé 1, 9610 Noerager, Denmark
CZECH REPUBLIC
DENMARK
DUBAI
V.V.& SONS
P.O. Box 105, Dubai, U.A.E.
EGYPT
Solimco
9, El Attibaa St. Doki, Cairo, Egypt
ESTONIA
F.Y.R.O.M.
FINLAND
FRANCE
GERMANY
GREECE
HiFi Club Estonia
T.P. KODI
Audio Nord
Marantz France
Marantz Deutschland
Adamco S.A.
Ehte 4, 90503 Haapsalu, Estonia
ul.Cedomir Kantargiev 21a, Skopje, Former Yugoslavian Republic of Macedonija
Uudenmaankatu 4-6, Helsinki SF-00120, Finland
A division of Marantz Europe B.V., P.O. Box 301, 92 156 Suresnes Cedex, France
Hakenbusch 3, 49078 Osnabrück, Germany
188, Hippocratous Street, 11471 Athens, Greece
Building SFF-2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands
Unit 1706, Metroplaza II, 223 Hing Fong Road, Kwai Fong, N.T., Kowloon, Hong Kong
Terez Krt.31, 1067 Budapest, Hungary
HEADQUARTERS EUROPE: Marantz Europe B.V.
HONG KONG
HUNGARY
ICELAND
INDIA
IRAN
IRELAND
ISRAEL
ITALY
IVORY COAST
JAPAN
KOREA
KUWAIT
LATVIA
Marantz Asia Ltd.
Infovox Ltd.
ID Electronics Ltd.
NOVA Audio Private
Home Co.
Marantz Ireland
Elmor Ltd.
Marantz Italy
Armula 38, 108 Reykjavik, Iceland
8,Punam Co-op.Society 29/30 Road#5, Union Park MUMBAI 400052, India
5th floor no 878 Philips Building Enghelab ave, P.O. 11365/7844 Tehran, Iran
Clonskeagh, Dublin 14, Ireland
52 Heh Beiyar Street, Kikar Hamedina, Tel Aviv, Israel
Via Casati 23, 20052 Monza (Milano), Italy, Servizio Consumatori 1678-20026, Numero Verde
B.P. 2428, Abidjan 01, Ivory Coast
35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan
121-210, 2F Shinhan Bldg., 247-17 Seokyo-dong, Mapo-ku, Seoul, Korea
P.O. Box 8196, Salmiah 22052, Kuwait
Hifivoir
Marantz Japan Inc.
Mk Enterprises Ltd.
alAlamiah Electronics Intl.
Ace Ltd.
61, LacPlesa Str., Riga LV 1011, Latvia
LEBANON
LITHUANIA
MALAYSIA
MALTA
AZ Electronics S.A., 1,
Accapella Ltd.
P.O. Box 11 2833, Beirut, Lebanon
Ausros, Vartu G/5, Pasazo SKG., 2001 Vilnius, Lithuania
Wo Kee Hong Electronics Sdn. Bhd. Suite 8.1, Level 8, Menara Genesis, No. 33, Jalan Sultan Ismail, 50250 Kuala Lumpur, Malaysia
Doneo Co Ltd.
78 The Strand, Sliema SLM07, Malta
MAURITIUS
SKR Electronics Ltd.
P.O. Box 685, Bell Village, Port Louis, Mauritius
MILITARY MARKET EUROPE PASCO GmbH
PO BOX 1280, Sandhausen 69200, Germany
NETHERLANDS
NEW ZEALAND
NORWAY
Marantz Domestic Sales
Wildash Audio Systems
Audio Nord
A division of Marantz Europe B.V., Building SFF2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands
14 Malvern Road, Mt. Albert, Auckland, New Zealand
Sandkerveien 64, Oslo 0483, Norway
OMAN
POLAND
PORTUGAL
PROFESSIONAL EUROPE
PROFESSIONAL U.S.A.
QATAR
REUNION
ROMANIA
RUSSIA
Mustafa & Jawad Trading CO.
Philips Polska Sp. z.o.o.
Corel2
Marantz Professional Products
Marantz Professional Products
Almana & Partners W.W.L.
Vision +
P.O. Box 1918, Ruwi, Oman
Al.Jerozolimskie 195b, 02 222 Warszawa, Poland
Comércio de Electrónica Lda., Av. Luís Bívar, No 85 A, 1050 Lisboa, Portugal
Kingsbridge House, Padbury Oaks, 575-583 Bath Road, Longford, Middlesex UB7 0EH, U.K.
Distributed by: Superscope Technologies Inc., 1000 Corporate Blvd. Ste.D, Aurora, Illino
P.O. Box 49, Doha, Qatar
180 Rue du Marechal Leclerc, 97400 Saint Denis, Ile de la Reunion
5, Zagazului Str. Bl.1G,apt.18, sector 1,Bucharest, Romania
7/2, Montazhnaya Street, 107497 Moscow, Russia
Nova Music Entertainment
Absolute Audio
SAUDI ARABIA
SINGAPORE
SLOVAKIA
SLOVENIA
SOUTH AFRICA
SPAIN
Adawlia Univ. Electr. Apl
P.O. Box 2154, Alkhobar 31952, Saudi Arabia
Wo Kee Hong Distribution PTE Ltd. 130 Joo Seng Road, #03-02 Olivine Building, Singapore 368357
Bis Audio s.r.o.
Bofex
Coherent Imports (PTY) Ltd.
Marantz Spain
The listening Room
Audio Nord
Nam. SNP 10, 96001 Zvolem, Slovakia
Smartinska 152, HALA V/3, 61000 Ljubljana, Slovenia
P.O. Box 1614, Alberton, 1450, South Africa
Martinez Villergas 2, Apartado 2065, Madrid 28027, Spain
Mezzanine Floor, The Landmark 385, Galle Road, Colombo - 3, Sri Lanka
Almedalsvagen 4, Gotenborg 402-23, Sweden
SRI LANKA
SWEDEN
SWITZERLAND
SYRIA
TAHITI
TAIWAN
THAILAND
TUNESIA
TURKEY
U.K.
U.S.A.
YUGOSLAVIA
EXPORT
Sound Company AG
Hamzeh & Partners
Covecolor
Pai-Yuing Co. Ltd.
MRZ Standard Co. Ltd.
Societe EDEVIG
Türk Philips Ticaret A.S.
Marantz Hifi UK Ltd.
Marantz America Inc.
ITM Company
Postfach, 8010 Zürich, Switzerland
Hafez Ibrahim Str. No 117, Damascus Shalan, Syria
Av. Prince Hinoi, Cours de l'union sacré, P.O. Box 2334, Papeete, Tahiti
6th No 148 Sung Kiang Road, Taipei 10429, Taiwan R.O.C.
746-750 Mahachai Road, Wangburapa, Bangkok 10200, Thailand
40, Avenue du Golfe Arabe, El Menzah, 1004, Tunesia
Yukari Dudullu Organize sanayi Bolgesi, 2.Cadde no.28, 81260 Umraniye-Istanbul, Turkey
Kingsbridge House, Padbury Oaks, 575-583 Bath Road, Longford, Middlesex UB7 0EH, U.K.
1100 Maplewood Drive Itasca, IL 60143, U.S.A.
Omladinskih Brigada 86, 11070 Belgrade, Yugoslavia
A division of Marantz Europe BV,Building SFF2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands
Marantz Domestic Sales
is a registered trademark.
P/NO: 3834RS0020N
Printed in China
304W851252
Download from Www.Somanuals.com. All Manuals Search And Download.
|