Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL FRANÇAIS ENGLISH
Introduction
Introduction
ⅥNote on use / Observations relatives a l’utilisation / Notas sobre el uso
FCC INFORMATION (For US customers)
1. PRODUCT
This product complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this product may not cause harmful
interference, and (2) this product must accept any interference received,
including interference that may cause undesired operation.
2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions contained in
this manual, meets FCC requirements. Modification not expressly
approved by Marantz may void your authority, granted by the FCC, to use
the product.
•
•
•
Keep the apparatus free from moisture, water, and
dust.
Protéger l’appareil contre l’humidité, l’eau et
lapoussière.
Mantenga el equipo libre de humedad, agua y
polvo.
3. NOTE
•
•
•
Do not let foreign objects into the apparatus.
Ne pas laisser des objets étrangers dans l’appareil.
No deje objetos extraños dentro del equipo.
This product has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation.
•
•
•
Avoid high temperatures.
Allow for sufficient heat dispersion when installed
in a rack.
Eviter des températures élevées
Tenir compte d’une dispersion de chaleur suffisante
lors de l’installation sur une étagère.
Evite altas temperaturas
Permite la suficiente dispersión del calor cuando
está instalado en la consola.
This product generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this product does cause harmful interference to radio or television
reception, which can be determined by turning the product OFF and ON,
the user is encouraged to try to correct the interference by one or more
of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the product into an outlet on a circuit different from that
to which the receiver is connected.
•
•
Unplug the power cord when not using the
apparatus for long periods of time.
Débrancher le cordon d’alimentation lorsque
l’appareil n’est pas utilisé pendant de longues
périodes.
•
•
•
Do not let insecticides, benzene, and thinner come
in contact with the apparatus.
Ne pas mettre en contact des insecticides, du
benzène et un diluant avec l’appareil.
No permita el contacto de insecticidas, gasolina y
diluyentes con el equipo.
•
Consult the local retailer authorized to distribute this type of
product or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
•
Desconecte el cordón de energía cuando no utilice
el equipo por mucho tiempo.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT.
•
•
•
Handle the power cord carefully.
ATTENTION:
Hold the plug when unplugging the cord.
Manipuler le cordon d’alimentation avec précaution.
Tenir la prise lors du débranchement du cordon.
Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el cordón
de energía.
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME
LA PLUS LARGE DE LAFICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
* (For apparatuses with ventilation holes)
•
Never disassemble or modify the apparatus in any
way.
•
•
•
Do not obstruct the ventilation holes.
Ne pas obstruer les trous d’aération.
No obstruya los orificios de ventilación.
ⅥCopyrights / Droits d’auteur / Derechos de Autor
•
•
Ne jamais démonter ou modifier l’appareil d’une
manière ou d’une autre.
Nunca desarme o modifique el equipo de ninguna
manera.
• It is prohibited by law to reproduce, broadcast, rent or play discs
in public without the consent of the copyright holder.
• La reproduction, la diffusion, la location, le prêt ou la lecture
publique de ces disques sont interdits sans le consentement du
détenteur des droits d’auteur.
• De acuerdo con las leyes está prohibido reproducir, emitir,
alquilar o interpretar discos en público sin la autorización del
propietario de los derechos de autor.
II
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
Introduction
Contents
Introduction
You can enjoy clearer video output when connecting this unit to
a display device with an HDMI-compatible port.
Features .................................................................................... 1
Supplied Accessories ............................................................... 3
Disc Handling ...........................................................................................4
Cleaning Discs ..........................................................................................4
Unplayable Discs .....................................................................................5
Color Systems ...........................................................................................5
Region Codes ...........................................................................................5
Structure of Disc/SD Memory Card Contents ...............................5
About the Remote Control ...................................................... 6
Front Panel ................................................................................................7
Rear Panel ..................................................................................................7
Remote Control .......................................................................................8
Front Panel Display ................................................................................9
Adjusting the Brightness of the Display .........................................9
Playback in slightly faster speed while keeping the sound
Dialog speed is available only on discs recorded in the Dolby
A-B Repeat ..............................................................................................17
Virtual Surround ...................................................................................23
Pure Direct Mode .................................................................................23
Playing Back an MP3, Windows Media™ Audio,
Various playback modes are available including still pictures, fast
forward/reverse, slow motion and step frames.
The resolution of pictures while in the still (pause) mode can be
This unit can shuffle the playback order of tracks/files.
You can program the playback order of tracks/files in a desired
You can display BD/DVD menus in a desired language, if
The power turns off automatically if there is no activity at the
unit or its remote control for more than 30 minutes (refer to page
You can select a desired language for subtitles if that language is
Kodak Picture CD ..................................................................................27
sequences recorded from different angles.
You can select a desired audio language and sound mode if
different languages and modes are available on a disc.
Connections
Connecting to a TV .............................................................................. 10
Connecting to a Display Device with HDMI Cable ................... 10
Connecting to a Display Device and an Amplifier/
HDMI Output Mode and Actual Output Signals ....................... 11
Audio Setting ........................................................................................ 11
Digital Connection to an AV Amplifier with
Custom ...................................................................................29
Initialize ..................................................................................37
You can set the control level to limit playback of discs which may
●Automatic Detection of Discs
This unit automatically detects if a loaded disc is BD, DVD, audio
CD, MP3, JPEG, Windows Media™ Audio or DivX®.
●Pure Direct
The sound quality of analog audio output is improved by stop
output of video signals, etc.
Others
Built-in Decoder ................................................................................ 12
Connection to a Device with 2-channels of Analog Audio
Inputs .................................................................................................... 13
Troubleshooting .....................................................................38
Language Code .......................................................................39
Specifications .........................................................................40
1
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
Introduction
●Playing Back Windows Media™ Audio File
You can enjoy Windows Media™ Audio files which are recorded
on DVD-RW/-R, CD-RW/-R or SD Memory Card.
●Playing Back an MP3 File
●On-Screen Display
Warning
Information about the current operation can be displayed on a
screen, allowing you to confirm the currently active functions
(such as program playback) using the remote control.
●Dimmer
To avoid fire or electric shock, do not expose this unit to rain or
moisture.
You can enjoy MP3 files which are recorded on DVD-RW/-R,
CD-RW/-R or SD Memory Card.
WARNING:
LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.
The brightness of the front panel display can be adjusted.
●Screen Saver
●Playing Back DivX® File
You can enjoy DivX® files which are recorded on DVD-RW/-R or
CD-RW/-R.
The screen saver program starts if there is no activity at the unit or its
remote for more than 5 minutes. The brightness of the display is
darken by 75%. The program is deactivated when there is any activity.
●Picture Control
• Official DivX® Certified product
Installation Location
For safety and optimum performance of this unit:
• Plays all versions of DivX® video (including DivX® 6) with
standard playback of DivX® media files.
Picture control adjusts black level and noise reduction of the
specific display.
• Do not stand the unit up vertically. Install the unit in a horizontal
and stable position. Do not place anything directly on top of the
unit. Do not place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from sources of
intense heat. Avoid dusty or humid places. Avoid places with
insufficient ventilation for proper heat dissipation. Do not block
the ventilation holes on the sides of the unit. Avoid locations
subject to strong vibration or strong magnetic fields.
• Be sure to remove a disc and unplug the AC cord from the outlet
before carrying the unit.
●Playing Back the Contents in SD Memory Card
●Search
• You can playback MP3, Windows Media™ Audio, or JPEG stored
in an SD Memory Card.
Chapter search: Search for a desired chapter.
Title search:
Track search:
Time search:
Search for a desired title.
Search for a desired track/file.
Search for a desired time point or a title or a
track/file.
• You can store picture-in-picture commentary, subtitles or other
extras for BD-ROM Profile 1.1 files in an SD Memory Card and
playback with the BD-ROM.
●BD-J Application
●Repeat
Chapter:
Title:
Track:
All:
• With some BD that supports Java applications (BD-J), you can
Repeated playback of a chapter of the disc.
Repeated playback of a title of the disc.
Repeated playback of a track/file of the disc.
Repeated playback of the entire disc.
(not available for BD, DVD-video)
Repeated playback of a part between two points.
Repeated playback of a folder of the MP3/JPEG/
Windows Media™ Audio/DivX® disc being played
back is possible.
enjoy interactive function (e.g., game).
●Analog 7.1ch Surround Output
This player is equipped with analog 7.1-channel surround audio
out jacks for playback.
Non-use periods - Turn off the unit when it is not in use. Unplug
the unit from the household AC outlet if it is not to be used for a
long time. Unplug the unit during lightning storms.
A-B:
Group:
Important
Use only discs marked with logos listed on page 4.
Please read this operating instructions carefully before using the
unit, and keep it for future reference.
●Zoom
Power Supply
x1.2, x1.5, x2.0, x4.0 magnified image can be displayed. (not
The main power supply is engaged when the main plug is
plugged in a 120V, 60Hz AC outlet. To operate the unit, press
<ON / OFF> to turn on the unit.
available for BD)
●Marker
Cautions on Installation
Noise or disturbance of the picture may be generated if this unit or
any other electronic equipment using microprocessors is used
near a tuner or TV.
Electric reference points designated by user can be called back.
●Resume Playback
User can resume playback from the point at which the playback
has been stopped even if the power is turned off.
●Bit Rate Indication
If this happens, take the following steps:
• Install this unit as far as possible from the tuner or TV.
• Set the antenna wires from the tuner or TV away from this unit’s
AC cord and input/output connection cords.
• Noise or disturbance tends to occur particularly when using
indoor antennas or 300Ω/ohms feeder wires. We recommend
using outdoor antennas and 75Ω/ohms coaxial cables.
The bit rate (the amount of video data currently being read) can
be displayed during the playback of video contents. (not
available for BD)
●DRC (Dynamic Range Control)
Use this procedure to set the dynamic range of the output
signals when playing back DVD/BD recorded in Dolby Digital/
Dolby Digital Plus/Dolby TrueHD.
Note
●Displaying a JPEG picture
• For heat dispersal, do not install this equipment in a
confined space such as a book case or similar unit.
Kodak Picture CD can be played back. Still images stored in JPEG
format on DVD-RW/-R, CD-RW/-R or SD Memory Card can also be
played back.
2
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
Introduction
Before Using
Supplied Accessories
Pay attention to the following before using this unit:
●Moving the unit.
Please check to make sure the following items are included with
the main unit in the carton.
10 cm or more
To prevent short-circuits or damaged wires in the connection
cables, always unplug the power supply cord and disconnect the
connection cables between all other audio components when
moving the unit.
remote control (RC001BD)
“AA” (R6P) batteries x2
user guide
●Store the operating instructions in a safe place.
After reading the operating instructions, store them in a safe
place as they could come in handy in the future.
●Whenever <ON/STANDBY> is in the STANDBY state, the unit
is still connected to AC line voltage.
AC cord
Please be sure to press <ON / OFF> to turn off the power or
unplug the cord when you leave home for, say, a vacation.
●Note that the illustrations in these instructions may differ
from the actual unit for explanation purposes.
Wall
RCA audio cable
warranty card
The serial number of this product may be found on the back of
the unit. No others have the same serial number as yours. You
should record the number and other vital information here and
retain this book as a permanent record of your purchase to aid
identification in case of theft.
Caution on Handling
●Cautions on using mobile phones.
Using a mobile phone near this unit may result in noise. If so,
move the mobile phone away from this unit when it is in use.
●Before turning the power operation button on.
Check once again that all connections are correct and that there
are not problems with the connection cables. Always set the
power operation button to the standby position before
connecting and disconnecting connection cables.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
RCA video cable
●Sufficiently ventilate the place of installation.
Serial No.
Trademark Information
If the unit is left in a room full of the smoke from cigarettes, etc., for
long periods of time, the surface of the optical pickup could get
dirty, in which case it will not be able to read the signals properly.
About Copyright
Unauthorized copying, broadcasting, public performance and
lending of discs are prohibited.
Dew Warning
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC.
This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is prohibited.
Moisture condensation may occur inside the unit when it is
moved from a cold place to a warm place, or after heating a cold
room or under conditions of high humidity. Do not use the unit at
least for 2 hours until its inside is dry.
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the AC cord with wet hands.
• Do not pull on the AC cord when disconnecting it from AC wall
outlet. Grasp it by the plug.
U.S. Patent Nos. 6,836,549; 6,381,747;
7,050,698; 6,516,132; and 5,583,936.
• If, by accident, water is spilled on this unit, unplug the AC cord
immediately and take the unit to our authorized service center
for servicing.
Manufactured under license under U.S. Patent #’s: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS and DTS Digital Surround
are registered trademarks and the DTS logos and Symbol are
trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.
3
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
Introduction
Playable Discs and Files
Note
This unit is compatible to play back the following discs.
To play back a BD or DVD, make sure that it meets the requirements
for region codes and color systems as described on page 5. You can
play back discs that have the following logos on the disc. Other disc
types are not guaranteed to play back.
• Discs containing the DivX® files with the DivX® GMC (Global
Motion Compensation) playback feature, which is DivX®
supplemental function, cannot be played back on this unit.
• This unit cannot play back the disc contents protected by
Windows Media™ Digital Rights Management (DRM).
• “WMA” (Windows Media™ Audio) is an audio codec
developed by Microsoft® in the United States of America.
• This unit supports AAC as an audio format recorded with
video contents for BD-R, BD-RE. This unit does not support
AAC as an independent audio file.
Playable discs
Logos
Blu-ray Disc
Java and all other trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the United
States and/or other countries.
- BD-video
- BD-RE (ver.2.1)
- BD-R (ver.1.1)
(Unclosed discs may not be played back.)
Readable cards
Playable files / data
DVD-video
DivX, DivX Certified, and associated logos are trademarks of DivX,
Inc. and are used under license.
SD Memory Card (8MB - 2GB)
SDHC Memory Card (4GB)
miniSD Card (8MB - 2GB)
microSD Card (8MB - 2GB)
MP3, Windows Media™ Audio,
JPEG, Picture-in-picture
commentary, subtitles or other
extras for BD-ROM Profile 1.1
DVD-RW
(Finalized discs only)
(Finalized discs only)
DVD-R
DVD-R DL
Windows Media and the Windows logo are trademarks or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
Note for SD Memory Cards
• Do not remove the SD Memory Card or turn off the unit while
the contents of the card is in playback. It may result in
malfunction or loss of the card’s data.
CD-DA (audio CD)
CD-RW
“Blu-ray Disc” and
are trademarks.
• Please keep the SD Memory Cards in their cases when you are
is a trademark of DVD Format/Logo Licensing Corporation.
not using them.
• Do not try to open or modify the card.
is trademark of Eastman Kodak Company.
• Do not touch the terminal surface with your fingers or any metals.
• Do not attach additional labels or stickers to cards.
• Do not remove the label of the SD Memory Cards.
• This unit supports SD Memory Card with FAT12/FAT16 file
system, and SDHC Memory Card with FAT32 file system.
• This unit may not read the SD Memory Cards formatted on
computer. If that is the case, please reformat the SD Memory
Cards on this unit and try again.
About Discs
CD-R
Disc Handling
• Handle the discs so that fingerprints and dust do not adhere to
the surfaces of the discs.
• Always store the disc in its protective case when it is not used.
• Note that discs with special shapes cannot be played on this
product. Do not attempt to play back such discs, as they may
damage the unit.
Kodak Picture CD
• This unit does not supports mini SDHC and micro SDHC
—
DTS - CD (5.1 Music Disc)
Memory Card.
• For miniSD Card and microSD Card adapter is necessary.
Playable files
Logos
—
Media
miniSD Card
microSD Card
Adapter
MP3
DVD-RW/-R
CD-RW/-R
SD Memory Card
(including SDHC)
miniSD Card
microSD Card
Cleaning Discs
Adapter
miniSD Card
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe
the disc from the center to out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analog records.
Windows Media™
Audio
microSD Card
• Portions of this product are protected under copyright law
and are provided under license by ARIS/SOLANA/4C.
—
JPEG
DVD-RW/-R
CD-RW/-R
DivX®
4
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
Introduction
Unplayable Discs
Color Systems
Symbols Used in this Operating Instructions
The following discs will not play back on this unit.
• BD-RE Ver.1.0 (BD-disc with cartridge)
BD and DVD are recorded in different color systems throughout
the world. The most common color system is NTSC (which is used
primarily in the United States and Canada).
This unit uses NTSC, so BD or DVD you play back must be recorded
in the NTSC system. You cannot play back BD or DVD recorded in
other color systems.
To specify for which media type each function is, we put the
following symbols at the beginning of each item to operate.
• BD-R Ver.1.2 (HTL 4x or LTH 2x)
Symbol
Description
• BD contains MP3/ Windows Media™ Audio/ JPEG/ DivX® files
• BD/DVD hybrid disc (e.g., Total Hi Def hybrid disc)
• BD-video that does not include "A" on its region code.
Description refers to BD-video and BD-RE (ver. 2.1)/
BD-R (ver.1.1) recorded in BDMV mode
BD-V
Description refers to BD-RE (ver.2.1)/BD-R (ver1.1)
recorded in BDAV mode
Description refers to DVD-video and DVD-RW/-R
recorded in video mode
• DVD-video that does not include either "1" nor "ALL" on its
BDAV
DVD-V
Region Codes
region code.
• DVD-ROM/RAM (For DVD-ROM discs, data files in DivX® 3.11, 4.x,
5.x and 6 can be played)
BD-video
This unit has been designed to play back BD with
region A and DVD-video with region 1. You cannot
play back BD or DVD-video that are labeled for other
regions. Look for the symbols on the right on your BD
• DVD-RW/-R recorded in non-compatible recording format
• CD-ROM (Data files in DivX® 3.11, 4.x, 5.x and 6 can be played)
• CDV (Only the audio part can be played)
• CD-G (Only the audio signals can be output)
• CompactDisc-Interactive (CD-I)
• Video Single Disc (VSD)
• Video CD, Super Video CD
• Super audio CD (Only the sound on the CD layer can be heard. The
sound on the high-density super audio CD layer cannot be heard.)
Description refers to DVD-RW/-R recorded in VR mode
Description refers to audio CD and DTS-CD
DVD-VR
or DVD-video. If these region symbols do not appear
on your BD or DVD-video, you cannot play back the
DVD-video
CD
disc in this unit. The letter or number inside the
globe refers to region of the world. A BD or
DVD-video labeled for a specific region can only play
back on the unit with the same region code.
Description refers to DVD-RW/-R, CD-RW/-R and
SD Memory Card with MP3 files
Description refers to DVD-RW/-R, CD-RW/-R and
SD Memory Card with Windows Media™ Audio files
Description refers to DVD-RW/-R, CD-RW/-R and
SD Memory Card with JPEG files
MP3
WMA
JPEG
• DVD-audio
• HD DVD
Structure of Disc/SD Memory Card Contents
Description refers to DVD-RW/-R and CD-RW/-R with
DivX® files
®
DivX
• Disc with recording area less than 55mm in diameter
• Unauthorized disc (Pirated disc)
• Unfinalized disc
The contents of BD / DVD are generally divided into titles. Titles
may be further subdivided into chapters.
BD/DVD
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
title 1
title 2
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Audio CDs are divided into tracks.
Audio CD
Buttons on the main unit and remote control
track 1
track 2
track 3
track 4
track 5
Data discs or SD Memory Cards contains MP3/Windows Media™
Audio/JPEG/DivX® is divided into folders, and the folders are
subdivided into files.
MP3, Windows Media™ Audio, JPEG, DivX®
folder (group) 1
goupfolder1
folder (group) 2
groupfolder2
file (track) 1 file (track) 2 file (track) 3 file (track) 4 file (track) 5
5
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
Introduction
About the Remote Control
Using a Remote Control
Changing the Signal Code of a Remote Control
Keep in mind the following when using the remote control:
To avoid the other Marantz’s BD players responding the remote
signal of this unit, you can change the signal code of the remote
control. If the signal code of the remote control does not match to
the signal code of the unit, you cannot control the unit with the
remote control.
Loading the Batteries
• Make sure that there are no obstacles between the remote
control and infrared sensor window on the unit.
• Remote operation may become unreliable if strong sunlight or
fluorescent light is shining on infrared sensor window of the
unit.
A Open the battery
B Insert two “AA” (R6P)
batteries, with each one
oriented correctly.
compartment cover.
• Remote control for different devices can interfere with each
other. Avoid using remote control for other equipment located
close to the unit.
ⅥChange the signal code of the unit
1) In stop mode, press [SETUP].
• Replace the batteries when you notice a fall off in the operating
2) Use [Y / Z] to select
, then press [ENTER].
range of the remote control.
• The maximum operable ranges from the unit are as follows.
3) Use [Y / Z] to select
, then press [ENTER].
- Line of sight:
approx. 16 feet (5m)
4) Use [U / V] to select “Remote Control Setting”.
5) Press [ENTER] to select “BD1” or “BD2”.
- Either side of the center: approx. 16 feet (5m) within 30°
C Close the cover.
Others
Cautions on Batteries
Power Saving
Remote Control Setting BD1
Media Select Disc
On
30°
30°
• Use “AA” (R6P) batteries in this remote control.
• Replace the batteries with new ones approximately once a
year, though this depends on the frequency with which the
remote control is used.
16 feet (5m) 30°
16 feet (5m)
16 feet (5m) 30°
6) Press [SETUP] to exit.
• If the remote control does not operate within a close
proximity of the main unit, replace the batteries with new
ones, even if less than a year has passed.
• The included batteries serve only for verifying operation.
Replace them with new batteries as soon as possible.
• When inserting the batteries, be careful to do so in the
proper direction, following the and marks in the remote
control’s battery compartment.
• To prevent damage or battery fluid leakage:
- Do not mix a new battery with an old one.
- Do not mix two different types of batteries such as alkaline
and manganese.
• At this point the new signal code of the unit is effective. Please
change the signal code of the remote control to match to the
signal code of the unit with following procedure.
ⅥChange the signal code of the remote control
Set to “BD1”:
Press hold down both C and [1] on the remote control for at least
five seconds.
Set to “BD2”:
Press hold down both C and [2] on the remote control for at least
- Do not short-circuit, disassemble, heat or dispose of
batteries in flames.
five seconds.
• Remove the batteries when not planning to use the remote
control for a long period of time.
• If the batteries should leak, carefully wipe off the fluid from
the inside of the battery compartment, then insert new
batteries.
• If the signal code does not match, the signal code of the remote
control will be displayed on the front panel display.
• The default setting and the setting after you change the
batteries is “BD1”.
6
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
Introduction
Part Names and Functions
Front Panel
Rear Panel
8
11 12 13
10
9
1
6
9
14
2
3 4
5 7
8
10
3
4 5
6
7
16 15
1 2
The unit can also be turned on by pressing the buttons with circled numbers.
1. DIGITAL OUT jack
8. REMOTE CONTROL OUT/ IN jacks
By connecting this Blu-ray player to another
Marantz component, you can remotely
operate the components as a single system.
For connections, use the control adaptor
cable. (Mini Jack to RCA)
9. CONTROL CONNECTOR (RS-232C)
This is a terminal for future system extension.
10. AC IN Terminal
1. STANDBY indicator
8. Disc tray
Place a disc when opening the disc tray.
9. A OPEN/CLOSE button
Press to open or close the disc tray.
10. B PLAY button
Press to start or resume playback.
11. C STOP button
Press to stop playback.
12. H / G (SKIP DOWN/UP) button
Press to skip down/up titles/chapters/tracks/files.
13. h / g (FAST FORWARD/REVERSE)
button
Use digital audio coaxial/optical cable to
connect to an AV receiver, Dolby Digital
decoder or other device with a digital audio
coaxial/optical input jack.
This indicator lights up in green when the
power is on, and lights up in red in standby
mode.
2. ON/STANDBY button
Press to turn the unit to standby mode. In
standby mode, this unit still consumes small
amount of power.
2. 7.1ch AUDIO OUT jacks
Use an RCA audio cable to connect these jacks
to the 7.1-channel audio input jacks of your
amplifier with 7.1-channel input terminals.
3. 2ch AUDIO OUT jacks
3. ON / OFF (POWER) switch
Press to turn the unit on and off. If you turn
off the unit using this switch, the unit does
not consume power. In this condition, this
unit does not accept any button except this
switch.
Use to connect the AC cord to supply the
power.
Use an RCA audio cable to connect these
jacks to the 2-channel audio input jacks of
your amplifier with 2- channel input
terminals.
Press to search forward / backward through
a disc.
Note
4. VIDEO NR indicator
14. F PAUSE button
4. VIDEO OUT jack
• Do not touch the inner pins of the jacks on
the rear panel. Electrostatic discharge may
cause permanent damage to the unit.
Indicates that video signals of a BD, DVD,
etc., are being processed digitally with the
DNR (Digital Noise Reduction) processing.
5. Infrared sensor window
Receives signals from your remote control so
that you can control the unit from a distance.
6. Display
Press to pause playback.
Use an RCA video cable to connect to a TV
monitor, AV receiver or other device.
5. S VIDEO OUT jack
Use an S-video cable to connect to the
S-video input jack of external device.
6. HDMI OUT jack
Use an HDMI cable to connect to a display
with an HDMI input jack.
7. COMPONENT VIDEO OUT jacks
Use a component video cable to connect to
a display device with component input jacks.
Press repeatedly to reduce the overall level of
noise on the picture (DNR). Each time you
press the button, the level of the DNR switches
“Off”
A
“+1”
A
“+2”
A
“+3”
A
“Off”.
16. HDMI (RESOLUTION) button
Refer to “Front Panel Display” on page 9.
7. SD CARD slot
Press to set the HDMI jack’s video signal
output mode.
Insert an SD Memory Card, and play back the
contents in it.
7
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
Introduction
Remote Control
The unit can also be turned on by pressing the buttons with
circled numbers.
19. STOP C button
• Press to stop playback.
• Press to exit from the title menu.
20. REW h button
• During playback, press to fast reverse the playback.
21. STILL/PAUSE F button
• Press to pause playback.
• When playback is in pause, press repeatedly to forward the
playback step by step.
22. FFW g button
• During playback, press to fast forward the playback.
• When playback is in pause, press to slow forward the playback.
23. PLAY B button
1. POWER ON button
• Press to turn the unit on.
2. POWER OFF button
• Press to turn the unit to standby mode.
3. A-B REPEAT button
• Press to mark a segment between A and B for A-B repeat
playback.
4. REPEAT button
• Press to select the repeat mode.
5. RANDOM button
• Press to display the random playback screen for shuffling the
playback order of tracks/files.
6. ZOOM button
• During playback, press to enlarge the picture on the screen.
7. CLEAR button
• Press to clear the information once entered, to clear the
marker settings, or to cancel the programming for CD, etc.
8. RED/GRN/BLU/YEL button
31
29
30
28
1
2
3
4
5
6
7
• Press to start playback or resume playback.
24. MODE button
8
• During playback, press to display the picture adjustment
menu, and rapid playback.
• During the JPEG playback, press to display menus for
changing the visual effect for switching the image or
changing the size of the image.
• In stop mode with BD inserted, press to display a menu for
setting the BD audio mode.
• In stop mode with BD or DVD inserted, press to display a
menu for setting the virtual surround.
• In stop mode with audio CD, or disc with MP3, Windows
Media™ Audio, JPEG files inserted, press to display menus for
program and random playback.
27
25
9
10
11
12
• Press to select item on some BD menus.
9. TOP MENU button
• Press to display the top menu.
10. Cursor U / V / Y / Z buttons
• Press to select items or settings.
11. ENTER button
26
24
13
14
15
• Press to confirm or select menu items.
12. SETUP button
16
25. AUDIO button
• Press to display the audio menu.
26. RETURN button
• Press to return to the previously displayed menu screen.
27. POP UP MENU / MENU button
• Press to display the disc menu.
28. SEARCH MODE button
• Press to display the search menu.
29. Number buttons
• Press to enter the title/chapter/track/file numbers.
30. OPEN/CLOSE A button
• Press to open or close the disc tray.
31. DIMMER button
17
18
• Press to display the setup menu.
13. ANGLE button
• Press to access various camera angles on the disc.
• Press to rotate the JPEG/Kodak Picture images.
14. SUBTITLE button
19
23
21
20
22
• Press to display the subtitle menu.
15. PURE DIRECT button
• Press to stop output of video signals, etc., and output only
the analog audio signals to achieve high quality sound from
analog audio outputs.
16. DISPLAY button
• Press to display the On-Screen display menu.
17. SKIP H button
• Press to adjust the brightness of the front panel display.
• During playback, press to return to the beginning of the
current title chapter, track or file.
18. SKIP G button
Note
• [ZOOM] and [RANDOM] are not available for BD.
• During playback, press to skip the next chapter, track or file.
8
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
Introduction
Front Panel Display
Examples of Displays during Operation
Display
Description
12
13 11
10
9
8
7
Power on
ER AUD
HDMI GROUP TITLE TRACK CHAP TOTAL SING
REM
2 CH MULTI
DIGITAL DTS
Standby mode
Tray open
HD DVD
VCD
TrueHD DTS-HD MSTR
VSS MP3 WMA
AΑC
BD SD USB NET
1A-B
PL x HDCANGLE
L. PCM MPEG .MIX
1
PROG RAND
Tray is closing
Loading the disc
No disc inserted
2
3 4
14
5
6
1. B : Appears when playing back a disc.
F : Appears when playback is paused.
2. Appears during program playback.
3. Appears during random playback.
4. Appears during repeat playback.
5. These indicate the format being decoded.
• This is not a indication of the recorded
format or the format that will be output.
6. Appears when playing back a multi angle
disc.
10. These indicate the type of the different
sections of the currently playing disc.
11. Appears when HDMI video or audio signals
are being output.
No SD Memory Card inserted
This unit cannot read the disc or SD Memory Card inserted.
Stop mode.
Does not appear when HDMI connection is
not verified.
HDMI output mode(480p) is selected.
12. Indicates the type of the currently playing
disc.
13. Appears when inserting an SD Memory Card.
14. Appears various type of information on the
disc, the elapsed playing time, etc.
HDMI output mode(720p) is selected.
HDMI output mode(1080i) is selected.
HDMI output mode(1080p) is selected.
HDMI output mode(1080p24 frame) is selected.
Pure direct mode is set to pure direct off.
Pure direct mode is set to front panel display off.
Pure direct mode is set to video signal off.
Pure direct mode is set to video signal and front panel off.
7. Appears when playing back a multi-channel
audio disc.
8. Appears when playing back a 2-channel
audio disc.
9. Indicates the time display mode.
TOTAL : Appears when displaying the
total remain/elapsed time of
audio CD.
SING : Appears when sound data is
being played or sound data is
highlighted in program menu.
The total number of the track that has been registered for the
program playback and track number currently selected.
The total number of the files that has been registered for the
program playback and folder/file number currently selected.
REM : Appears when displaying
remaining time.
When the root folder is selected “ROOT” is displayed.
"All Clear" for program playback setting is selected.
Adjusting the Brightness of the Display
You can adjust the brightness of the display by the pressing [DIMMER] repeatedly. The brightness
changes as bright A dimmer A auto each time you press [DIMMER]. If you select auto, the display
gets dimmer during playback.
Note
• When playing back the disc that contains more than 100 titles, display of the chapter and time
on the front panel display will be moved a few dots to the right.
Note
• [DIMMER] is not available when the setup menu is displayed.
9
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Connections
Connections
Connecting to a TV
Connecting to a Display Device with HDMI Cable
Connecting this unit to device with an HDMI jack using an HDMI cable enables digital transfer of both
digital video signals and multi-channel audio signals.
Make one of the following connections, depending on the capabilities of your existing device.
After making the connection, please make HDMI settings on setup menu according to your display
Method 1
analog audio standard picture good picture
display device
Method 2
Method 3
better picture
device. Refer to page 30-32.
this unit
Method 4
HDMI OUT
best audio and picture
COMPONENT
VIDEO IN
AUDIO IN
COMPONENT
VIDEO IN
S-VIDEO IN
VIDEO
IN
R
L
Y
Y
(Green)
(Blue)
(Red)
(Green)
display device
PB
PR
PB/CB
PR/CR
(Blue)
(Red)
RCA
video
cable
S-video
cable
RCA
audio
cable
To HDMI Input jack
component
video cable
component
video cable
HDMI cable
A display device with an HDMI compatible port
and
or
or
or
this unit
Cables not included.
(Green)
(Red)
(Blue)
(Green)
(Red)
(Blue)
Please purchase the necessary cables at your local store.
R
L
2ch AUDIO OUT
S VIDEO OUT
VIDEO OUT
Connecting to a Display Device and an Amplifier/Receiver with HDMI Cable
Connecting this unit to display device and an amplifier/receiver with an HDMI jack using HDMI cables
enables digital surround sound with high quality video.
2ch AUDIO OUT
VIDEO OUT
S VIDEO OUT COMPONENT COMPONENT
VIDEO OUT
VIDEO OUT
Front Speaker (left)
Front Speaker (right)
(When RCA cable
connected)
(When BNC cable
connected)
Center
Speaker
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
amplifier
this unit
HDMI OUT
display device
HDMI IN
HDMI IN
HDMI OUT
Note
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR,
pictures may be distorted due to the copy protection system.
• If the display device to which the player is to be connected is compatible with progressive scan
video, connect to the component video input.
HDMI cable
HDMI cable
• This unit’s COMPONENT VIDEO OUT jacks are compatible for 480i/480p/720p/1080i video
resolution. If the connected display device is not compatible for 480p/720p/1080i video
resolution, set “Component Output” to “480i”. (For playing back BD, 480i video resolution is not
available.)
• If the picture is not output properly to the display device because of the “HDMI Video
Resolution” or “Component Output” setting, press and hold B on the front panel for more than
5 seconds. The “HDMI Video Resolution” setting will be reset to the default automatically.
• If you are using HDMI connection and set “HDMI Video Resolution” to “1080p” or “1080p24”,
picture may not be output properly to the display device. In that case, set “HDMI Video
Resolution” to “480p”, “720p” or “1080i”.
Subwoofer
Surround
back (For
7.1-channel) 7.1-channel)
(left)
(right)
Surround
back (For
Surround Speaker (right)
Surround Speaker (left)
Cables not included.
Please purchase the necessary cables at your local store.
10
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Connections
Connections
HDMI Output Mode and Actual Output Signals
Audio Setting
Press <HDMI (RESOLUTION)> to select the HDMI output mode. HDMI video resolution changes as
following.
When using HDMI connections make the “HDMI Audio Out” settings in the “Audio” menu on the
setup menu according to the specifications of the device or monitor to be connected.
Front Panel Display
HDMI Video Resolution
480 Progressive
Device to be connected
“HDMI Audio Out” setting
HDMI Multi(Normal)
Output HDMI audio signal
Device compatible with DTS,
DTS-HD, Dolby Digital, Dolby
Digital Plus or Dolby TrueHD
decoding
Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS, or DTS-HD
bitstream are output from HDMI
OUT. Make the speaker settings on
the connected AV amplifier, etc.
Multi-channel audio signals are
output from the HDMI terminal.
Make the speaker settings with the
speaker setting items appear after
you select “HDMI Multi(LPCM)”.
Refer to page 32.
Down-mixed 2-channel audio
signals are output from HDMI
OUT.
HDMI audio will be muted, and
Dolby Digital/DTS bitstream or
LPCM will be output from DIGITAL
OUT depending on the “Digital
Out” setting. Refer to page 12.
Press <HDMI (RESOLUTION)>
720 Progressive
Press <HDMI (RESOLUTION)>
1080 Interlaced
Press <HDMI (RESOLUTION)>
1080 Progressive
Press <HDMI (RESOLUTION)>
1080 Progressive 24 frame
Press <HDMI (RESOLUTION)>
Device compatible with 3 or
more channels of audio inputs
(not DTS, DTS-HD, Dolby Digital,
Dolby Digital Plus or Dolby
TrueHD compatible)
HDMI Multi(LPCM)
Device compatible with
2-channel audio input or device
not compatible with audio input
HDMI connection to a display
device, and digital audio
connection (coaxial/optical) to
an AV amplifier.
HDMI 2ch
Audio Mute
Note
• After you select a HDMI output mode, the supported HDMI video resolution will be output.
• Video and audio signals may be distorted temporarily when switching to/from the HDMI output
mode.
ⅥAudio signals output from HDMI OUT
• You can also change the HDMI output mode from “HDMI Video Resolution” in the “Video” menu
on the setup menu. In this menu, you can confirm what HDMI video resolutions are supported
by connected display device. Refer to page 31.
Disc type Audio recording
format
“HDMI Audio Out” setting
HDMI Multi(Normal) HDMI Multi(LPCM)
HDMI 2ch
• In order to get natural and high quality film reproduction of 24-frame film material, use HDMI
cable (High Speed HDMI cable is recommended) and select “1080p24” if the connected display
device is compatible with 1080p24 frame input.
Dolby Digital*1
Dolby Digital Plus*1
Dolby TrueHD*1
DTS*1
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
Multi LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch LPCM
Multi LPCM*2
Multi LPCM
Multi LPCM
• For BD, with the 1080p24 frame, you can enjoy natural and high quality film production of 24-
frame film material. If the connected display device is not compatible for 1080p24 frame, you
cannot set “HDMI Video Resolution” to “1080p24”.
BD-video
• Even when “HDMI Video Resolution” is set to “1080p24”, if “I/P Direct” is set to “Off” or for playing
back DVD, a video resolution supported by the disc and the display device will be output instead
of 1080p24 frame.
DTS-HD*1
Multi LPCM
AAC
Multi LPCM
Dolby Digital
DTS
Multi LPCM
Dolby Digital
2ch LPCM
Multi LPCM*3
Multi LPCM
Multi LPCM
Multi LPCM
Multi LPCM
Multi LPCM
Multi LPCM
Multi LPCM
2ch LPCM
DTS-HD
LPCM
• There is no output from VIDEO OUT, S VIDEO OUT and COMPONENT VIDEO OUT jacks when you
play back a BD that recorded 24-frame film material.
AAC
LPCM
BD-RE/BD-R
• COMPONENT VIDEO OUT jacks may not output any signals when you set “HDMI Select” to “RGB”
or “HDMI Deep Color” to “Auto”.
Dolby Digital
DVD-video DTS
LPCM
• When both HDMI OUT and COMPONENT VIDEO OUT jacks are connected to display device, and
HDMI output is “1080p”, the video signal may not be output properly from the COMPONENT
VIDEO OUT jacks.
• If you change the HDMI output mode with <HDMI (RESOLUTION)> during BD playback, it may
take 2 to 10 seconds to change, and while changing the HDMI output mode, sound and video
will be stopped.
Dolby Digital
MP3/MP2
DivX®
• “HDMI Deep Color” is available only when the display device is connected by HDMI cable and
supports HDMI Deep Color.
audio CD/ MP3/Windows
Media™ Audio
DTS-CD
2ch LPCM
2ch LPCM
2ch LPCM
• For “Auto” in “HDMI Deep Color” and for “1080p” or “1080p24” in “HDMI Video Resolution”, using
the High Speed HDMI cable is recommended.
DTS
Multi LPCM
2ch Downmix LPCM
11
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Connections
Connections
*1 If “BD Audio Mode” is set to “Mix Audio Output” audio will be output as Multi LPCM. Refer to page 23.
Disc type
Audio recording format
“Digital Out” setting
Bitstream LPCM
Dolby Digital
*2 Outputs audio signals decoded from independent substream.
*3 For DTS-HD Master Audio, outputs audio signals decoded from DTS-HD Master Audio stream, and
for DTS-HD High Resolution Audio, outputs audio signals decoded from DTS core stream.
• If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as Multi
LPCM or 2ch Downmix LPCM depends on the capability of the connected device even if you select
“HDMI Multi(Normal)” in“HDMI Audio Out” setting. Refer to page 32.
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch LPCM
Dolby Digital
Dolby Digital
DTS*1
DTS*1
2ch Downmix LPCM*1
BD-video
Copyright protection system
DTS-HD
To play back the digital video images of a BD/DVD via an HDMI connection, it is necessary that both
the unit and the display device (or an AV amplifier) support a copyright protection system called
HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that
comprises data encryption and authentication of the connected AV device. This unit supports HDCP.
Please read the operating instructions of your display device (or AV amplifier) for more information.
LPCM
AAC
LPCM
Dolby Digital
DTS
LPCM
AAC
BD-RE/BD-R
DVD-video
DivX®
2ch Downmix LPCM
Dolby Digital
DTS
2ch Downmix LPCM
Dolby Digital
2ch LPCM
* HDMI: High-Definition Multimedia Interface
Note
Dolby Digital
MP3/MP2
• When using HDCP-incompatible display device, the image will not be viewed properly.
• Among the devices that support HDMI, some devices can control other devices via the HDMI
jack, this unit cannot be controlled by another device via the HDMI jack.
audio CD/ MP3/Windows Media™ Audio
DTS-CD
2ch LPCM
DTS
2ch LPCM
• The audio signals from the HDMI jack (including the sampling frequency, the number of
channels and bit length) maybe limited by the device that is connected.
• Among the monitors that support HDMI, some do not support audio output (e.g, projectors). In
connections with device such as this unit, audio signals are not output from the HDMI output jack.
2ch Downmix LPCM
*1 For the BD title with secondary or interactive audio, these audio will be output as Dolby Digital
when all the conditions listed below are met:
• When “BD Audio Mode” is set to “Mix Audio Output”.
• When “HDMI Audio Out” is set to “Audio Mute”.
Digital Connection to an AV Amplifier with Built-in Decoder
• When “Digital Out” is set to “Bitstream”.
If the BD title does not have secondary or interactive audio, the audio will be output as shown in the table.
• This table applies only when HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio
digital audio coaxial/
audio
optical cable
Out” setting.
DIGITAL AUDIO INPUT
DIGITAL AUDIO INPUT
Note
OPTICAL
COAXIAL
or
• In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal,
set “BD Audio Mode” to “Mix Audio Output” and set “HDMI Audio Out” to “HDMI Multi(LPCM)”.
Note for Optical Cable
digital audio coaxial/
optical input jack
this unit
• Optical cable may be damaged when bent at sharp angles. Ensure cables are coiled in loops with
a diameter of 6 inches (15cm) or more when storing them.
• Use a cable which is 9.8 feet (3m) or shorter.
• Insert cable plugs firmly into the jacks when making connections.
• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a jack.
ⅥAudio signals output from DIGITAL OUT
When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently output from
the HDMI OUT will be output from the DIGITAL OUT jack as well, except that Dolby Digital signal will be
output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output instead of DTS-HD.
< When HDMI is not connected or “Audio Mute” is selected···>
Cables not included.
Please purchase the necessary cables at your local store.
When HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio Out” setting, the audio signals
output from DIGITAL OUT changes depending on the “Digital Out” setting. Refer to the following table.
To set “Digital Out”, press [SETUP], then select “Quick” A “HDMI Audio Out” A “Audio Mute” or
“Custom” A “Audio” A “HDMI Audio Out” A “Audio Mute”.
12
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Connections
Connections
Connection to a Device with 2-channels of Analog Audio Inputs
Note
• If you connect to 5.1-channel surround system, do not connect to SBR/SBL (surround back R/L)
jacks, then set “Surround Back” in “Speaker Configuration” to “None”.
RCA audio cable
audio
Stereo component
AUDIO IN
L
this unit
Connecting the AC cord
R
After you made all necessary connections, connect the AC cord to the AC IN. Then connect the AC
cord to the AC outlet.
AC outlet
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
AC 120V, 60 Hz
AC cord
Note
• When connecting to a 2-channel audio stereo device, use the 2ch AUDIO OUT jacks. If the 7.1ch
AUDIO OUT jacks are used, set “7.1ch Audio Out” in the “Audio” menu to “2 Channel” (Refer to
page 33). For software recorded in multi-channel, analog signals that have been down-mixed
into 2 channels are output. (For sources which are prohibited from down-mixing, only the FL/FR
signals are output.)
Supplied cables used in this connection are as follows:
• AC cord x 1
Surround Connections to a Device with 7.1/5.1-channels of Analog Audio Inputs
Analog 7.1ch/5.1ch audio signals can be output from 7.1ch AUDIO OUT jacks.
audio
AV amplifier
Note
• Insert the plugs securely. Incomplete connections will result in the generation of noise.
this unit
FRONT
L
R
SURROUND
L
R
SURROUND
BACK
L
R
CENTER
SUB-
WOOFER
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
13
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
Place the disc on the disc tray with its label side
facing up.
<ON / OFF>
A
Turning the Power On
Press <ON / OFF>.
C
B
4
The power indicator lights red and the power is set to
1
2
the standby mode.
Press <ON/STANDBY> or [POWER ON].
The power indicator lights green and the power turns
Align the disc to the
disc tray guide.
on.
ⅥTurning the power off
Press <ON/STANDBY> or [POWER OFF].
• The power is set to the standby mode.
Press <ON / OFF> .
<ON/STANDBY>
Press A to close the disc tray.
[POWER OFF]
5
6
7
It may take a while to load
the disc.
• The power indicator turns off, and so does the power.
A
[POWER ON]
Some discs may start playback automatically.
Note
Press B to start playback.
For many of BD-video and DVD-video, a menu screen
may appear.
In this case, use [U / V / Y / Z] to select the desired
• Power continues to be supplied to some of the circuitry even
when the power is in the standby mode. When leaving home
for long periods of time or when traveling, either press
<ON / OFF> to turn off the power, or unplug the AC cord
from the AC outlet.
[U / V / Y / Z]
Press C once to stop playback temporarily.
Refer to “Resume Playback” on page 16.
To eject the disc:
Press A to open the disc tray, then remove the disc
before turning off the unit.
Direct Playback
[ENTER]
BD-V
CD
BDAV DVD-V DVD-VR
Turn on the power of this unit. (Refer to “Turning
the Power On” on this page.)
1
2
3
B
C
Turn on the display device and select the
appropriate input on the device to which the unit
is connected.
Note
•
may appear at the top-right on the screen when the
operation is prohibited by the disc or this unit.
• During the playback of 2-layered disc, pictures may stop for a
moment. This happens when the 1st layer switches to the
2nd layer. This is not a malfunction.
• The operation may vary when you play back BD/DVD with
disc menu. Refer to the manual accompanying the disc for
details.
Press A to open the disc tray.
About the button names in this explanation
< >: Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Buttons on the main unit and remote control
14
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
C
B
Operations Using Disc Menu, Title Menu, and Popup
Menu
Playing Back a BDAV mode BD-RE/-R and a VR mode
DVD-RW/-R
BDAV DVD-VR
BD-V DVD-V
When you are playing back a BDAV mode BD-RE/-R and a VR mode
DVD-RW/-R, you can choose “Original” or “Playlist” if the disc
contains a “Playlist”.
Many of BD and DVD disc contains Disc menu (DVD), Title menu
(BD/DVD) or Pop-up menu (BD-video) which describes the
contents of the disc, or a disc menu, which guides you through the
available functions in the disc. The contents of the menus may
differ depending on the discs.
1) In stop mode, press [POP UP MENU / MENU] to call up BD/
DVD menu.
2) Use [Y / Z] to select “Original” or “Playlist”.
h
F
g
Disc menu (DVD)
1) Press [POP UP MENU / MENU].
• The disc menu will appear.
2) Use [U / V / Y / Z] to select an item, then press [ENTER].
Original
Playlist
1
2
3
CH2 SLP
06/2/8 AM11.03 1CH EP
4CH XP
Title menu (BD/DVD)
1) Press [TOP MENU].
2) Use [U / V / Y / Z] to select an item, then press [ENTER].
1/1
[POP UP MENU /
MENU]
Pop-up menu (BD-video)
3) Use [U / V] to select desired title, then press [ENTER].
• This is a special feature available for some BD. When you
press [POP UP MENU / MENU], a menu pops out on the
screen while the contents still play back.
[TOP MENU]
[U / V / Y / Z]
Note
• “Original” is the title which is actually recorded on the disc.
• Playlist is edited version of the Original.
• BD/DVD menu varies depending on discs.
• If the disc does not contain Playlist, Playlist will not be
displayed on the BD/DVD menu.
1) During BD playback, press [POP UP MENU / MENU].
2) Use [U / V / Y / Z] to select an item, then press [ENTER].
[ENTER]
Note
• If the feature is not available,
screen.
• Contents of menus and corresponding menu operations may
vary among discs. Refer to the manual accompanying the disc
for details.
may appear on the TV
C
B
Pause
h
g
F
1) During playback, press F.
Playback will be paused.
F
Note
About the button names in this explanation
• For BD, DVD and DivX®, set “Still Mode” to “Field” in the
“Video” menu if pictures in the pause mode are blurred (refer
to page 31).
< >: Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Buttons on the main unit and remote control
15
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
Fast Forward / Fast Reverse Playback
BD-V BDAV DVD-V DVD-VR CD
Step by Step Playback
Resume Playback
1) During playback, press C.
®
MP3
DVD-VR DivX
BD-V BDAV DVD-V
• Resume message will appear on the screen.
1) During playback, press F.
®
WMA DivX
• Playback will pause and sound will be muted. The disc
advances frame by frame each time F is pressed.
Resume ON
1) During playback, press h or g repeatedly to select a
desired forward or reverse speed.
Press 'PLAY' to play from here. To play the beginning,
press 'STOP' first and then 'PLAY'.
h Button
F
1
2
2
3
3
4
4
5
5
<Example: BD>
g Button
1
2) Press B.
2) Press B to return to normal playback.
In a few seconds, playback will resume from the point at which
it stopped last. To cancel the resume playback and start
playing back the disc from the beginning, press C again while
the playback is stopped.
2) Press B to return to normal playback.
Note
• For BD and DVD, speed changes in 5 different levels. For
audio CD, MP3, Windows Media™ Audio, and DivX®, speed
changes in 3 different levels.
• For audio CD, MP3 and Windows Media™ Audio, sound will
be output at any speed of fast forward and reverse search.
• Set “Still Mode” to “Field” in the “Video” menu if pictures in
the pause mode are blurred (refer to page 31).
• Only step by step forward is available.
Note
• For MP3, JPEG or Windows Media™ Audio, playback will
resume from the beginning of the current file.
• The resume information will be saved even when the power is
in standby mode.
Note
• For MP3 and Windows Media™ Audio, fast forward/fast
reverse search between different files are not available.
• For audio CD, fast forward/fast reverse search between
different tracks are not available during the program and
random playback.
• If you open the disc tray or press C again in stop mode, the
resume information will be cleared.
• If you switch between “Disc” mode and “SD Memory” mode,
the resume information will be cleared.
• Resume playback is not available for the BD that supports
Java applications (BD-J).
• For some DivX® files, fast forward/fast reverse search may not
function.
Slow Forward Playback
®
DVD-VR DivX
BD-V BDAV DVD-V
1) During playback, press F.
2) Press g.
• Slow motion playback will begin and sound will be muted.
3) Press g repeatedly to select a desired speed.
• Slow forward speed changes in 3 different levels.
g Button
1
2
3
4) Press B to return to normal playback.
Note
• Set “Still Mode” to “Field” in the “Video” menu if pictures in
the slow playback mode are blurred (refer to page 31).
• Slow reverse is not available.
16
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
Dialog Speed
Repeat Playback
H
C
G
B
BD-V
BDAV DVD-V DVD-VR
Available repeat function may vary depending on the discs.
This function plays back approximately at 1.3 times of normal
playback while keeping the sound output. This function is
available only on discs recorded in the Dolby Digital format.
1) During playback, press [REPEAT] repeatedly until desired
repeat mode appears on the screen.
The following repeat modes are available.
1) During playback, press [MODE] repeatedly until the dialog
speed setting appears.
Repeat mode
Available media
Chapter repeat
BD-V BDAV DVD-V
Off
The current chapter will be
played back repeatedly.
DVD-VR
2) Press [ENTER] or [Y / Z] to switch
(x1.3), or off.
Title repeat
BD-V BDAV DVD-V
“Off” : Plays back in normal speed.
The current title will be
played back repeatedly.
[A-B REPEAT]
: Plays back approximately at 1.3 times of normal
playback.
“
“
DVD-VR
Track repeat
[REPEAT]
3) Press B to return to normal playback.
CD
MP3 WMA
The current track or file will
be played back repeatedly.
[RANDOM]
Note
®
JPEG DivX
• Every time you press C, the setting will be turned “Off”.
[CLEAR]
Group repeat
[U / V / Y / Z]
• Subtitle can be viewed during this function.
• Picture adjustment, and audio language setting cannot be
changed during this function.
• Virtual surround does not function during this function.
• This function may not work at some points on a disc.
• During this function, Muilti/2ch LPCM will be output from
HDMI output, 2ch LPCM will be output from digital audio
output, or 2ch analog sound will be output from analog
audio out.
MP3 WMA JPEG
The current folder will be
played back repeatedly.
®
DivX
[ENTER]
[RETURN]
All repeat
BDAV DVD-VR
CD
All titles, tracks or files in
the media will be played
back repeatedly.
MP3 WMA JPEG
[MODE]
G
®
DivX
H
C
B
A-B Repeat
®
BD-V BDAV DVD-V DVD-VR CD DivX
Desired section can be played back repeatedly.
1) Press [A-B REPEAT] at the desired starting point A.
2) Press [A-B REPEAT] at the desired ending point B.
• The repeat sequence begins.
3) Press [A-B REPEAT] to exit the sequence.
About the button names in this explanation
< >: Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Buttons on the main unit and remote control
17
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
3) Press B to start program playback.
Random Playback
• Program playback will start.
Note
CD
MP3
WMA JPEG
• The chapter/title/track/group repeat setting will be cleared
when moving to other chapter, title, track/file or folder.
• Repeat playback does not function during A-B repeat
playback.
This function shuffles the play back order of tracks/files.
Note
• During the program playback, press C once to set the resume
point, and then press B to resume the program playback
from where C was pressed (audio CD) or from beginning of
the file where C was pressed (MP3, Windows Media™ Audio,
or JPEG).
1) In stop mode, press [RANDOM].
• Repeat chapter/title is not available with some scenes.
• A-B Repeat can only be set within the current title or current
track/file.
Random
CD-DA
Total
0:45:55
• During the program playback, press
C
twice to display the
• A-B Repeat is not available with some scenes.
• To cancel the A point which was set, press [CLEAR].
• A-B Repeat playback does not function during chapter, title,
track, group or all repeat playback.
Random Program
--no indication--
program screen. To go back to the normal program playback,
press [RETURN] to exit from the program screen, then press
• Your program is still stored until either the disc tray is open or
power is turned off.
B.
• For some DivX® files, A-B Repeat playback may not function.
<Example: audio CD>
• Up to 99 tracks/files can be entered.
• To repeat the current track/file in the program, press
2) Press B to start random playback.
Program Playback
[REPEAT] repeatedly until “
back. To repeat the entire program press [REPEAT]
repeatedly until “ All” appears during playback.
• Even if an inserted disc contains mixed MP3, JPEG and
Track” appears during play
Note
CD
MP3
WMA JPEG
• During the random playback, press C once to set the resume
point, and then press B to resume the random playback
fromwhere C was pressed (audio CD) or from beginning of
the file where C was pressed (MP3, Windows Media™ Audio,
or JPEG).
You can program the disc to play back in your desired order.
1) In stop mode, press [MODE].
• The program screen will appear.
2) Use [U / V] to select a track/file, then press [ENTER].
Windows Media™ Audio files, program function allows 99 files
in combination of MP3, JPEG and Windows Media™ Audio
files.
• The current selected number on the front panel display blinks
while setting the program playback.
• “F***” is displayed in the front panel display while selecting
the folder.( *** is folder number.), and file is displayed as
“-****”after the folder indication.
• Playback from a desired track/ file and random playback are
not available during program playback.
• During the random playback, press C twice to display the
random playback screen. To cancel the random playback,
press [RANDOM] when the random playback screen is
displayed.
Program
MY COLLECTION
ABC
DEF
GHI
All Clear
• To repeat the current track/file in the random selection, press
[REPEAT] repeatedly until “
Track” appears during
1/1
ABC
1/1
playback. To repeat the entire random selection press
[REPEAT] repeatedly until “
All” appears during
<Example : MP3>
playback.
• You cannot go back to the previous track/file during random
playback.
• For a disc containing mixed MP3, JPEG and Windows Media™
Audio files, random playback of those files will be performed.
• “RAND” is displayed on the front panel display.
• For MP3, Windows Media™ Audio, and JPEG, use [U / V] to
select a folder, then press [ENTER] first, and then use
[U / V] to select a track/file, then press [ENTER].
• Press [CLEAR] to erase the last track/file of the program.
• Select “All Clear” at the bottom of the list to erase all the
tracks/files in the program.
• The programmed track/file is displayed in the right hand
screen.
• If the entire program cannot be displayed on the screen, “L”
or “K” appears.
• Use [Y / Z] to go back forward between the hierarchy of
folders.
• If eight or more tracks/files were set in a program, use the
H / G to see all the tracks/files.
18
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
Zoom
Camera Angle
H
G
®
DivX
BD-V DVD-V
DVD-V DVD-VR
JPEG
This function allows you to enlarge the video image and to pan
through the zoomed image.
Some BD and DVD contain scenes which have been shot
simultaneously from various angles. You can change the camera
angle when
appears on the screen.
1) Press [ZOOM] during playback.
• Playback will continue.
1) Press [ANGLE] during playback.
top of the screen.
2) Use [U / V] to select your desired angle.
2) Press [ZOOM] repeatedly to select a desired zoom factor:
x1.2, x1.5, x2.0, x4.0 or off.
• “x4.0” zoom is not available for JPEG and DivX®.
Note
x1.2
x1.5
x2.0
• If the “Angle Icon” setting is “Off” in the “Others” menu,
will not appear. Refer to page 37.
x4.0
Search
[the Number buttons]
ⅥUsing H / G
[ZOOM]
[CLEAR]
[SEARCH MODE]
3) Use [U / V / Y / Z] to move the zoomed picture across the
1) Press G to skip to the next chapter, track or file during
screen.
[U / V / Y / Z]
playback.
To go back to the previous chapter, track or file, press H
twice in quick successions.
[ENTER]
Note
[RETURN]
[ANGLE]
• If title contains no chapters, H / G changes the title.
[DISPLAY]
H
G
ⅥUsing [SEARCH MODE]
By using the [SEARCH MODE], you can select following search
options.
Search mode
Available media
/
4) Press [ZOOM] to exit zoom mode.
BD-V BDAV DVD-V
Title / Chapter search
DVD-VR
Note
• For BD, zoom function is not available.
• Zoom function does not work while disc menu is shown.
• Navigation screen is not available on JPEG.
• You cannot pan through the zoomed picture on some JPEG
files.
Track Search
CD
MP3 WMA
®
JPEG DivX
About the button names in this explanation
< >: Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Time Search
BDAV
BD-V
DVD-V
®
• For some DVD, “x4.0” zoom is not available.
• For DivX® files with small image, zoom function is not
available.
CD DivX
DVD-VR
Buttons on the main unit and remote control unit
• For DivX®, depends on the size of the image, some zoom
factor may not available.
Marker Search
BDAV
BD-V
DVD-V
CD
DVD-VR
19
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
1) Select a type of search by pressing [SEARCH MODE].
On-Screen Display
ⅥChapter information
• Every time you press [SEARCH MODE], type of search
changes.
2) Enter the desired chapter, track, file, title number or time
to search for using [the Number buttons].
• Chapter, title, track or time search will start.
You can check information about the current disc by pressing
[DISPLAY].
To call the On-Screen Display, press [DISPLAY] during playback.
Each time you press [DISPLAY], the information changes.
Depending on the media, available information varies.
2/5 0:00:00
Note
• During program and random playback, search functions are
not available except the search using H / G.
• Time search function is available only in the same track, file or
title.
BD-V BDAV
OFF A Title/Chapter information A Title information(elapsed
time) A Title information(remaining time) A HDMI information
A OFF
<Title / Chapter information for BD>
• For some DivX® files, time search may not function.
• For BD, chapter and time search are available only during
playback.
DVD-V DVD-VR
OFF A Chapter information (elapsed time)
2/5
1
A
B
A Chapter information (remaining time) A Title information
(elapsed time) A Title information (remaining time)
A Bit rate information A HDMI information A OFF
ⅥMarker search
This feature allows you to assign a specific point on a title or track
to be called back later.
1. Current chapter number/total number of chapters
2. Elapsed time/remaining time of the current chapter
3. Indicates that the multi camera angle images are available
on the scene (For BDAV mode BD-RE/-R, the type of title
(ORG: original, PL: playlist) will be displayed)
4. Current playback status
5. Current title number
6. Current repeat setting (Only when repeat setting is active)
(C: Chapter repeat, T: Title repeat, AB : A-B repeat)
CD
1) During playback, press [SEARCH MODE] repeatedly until
marker setting appears.
2) Use [Y / Z] to select a marker number (1-9).
OFF A Track information (elapsed time) A Track information
(remaining time) A Disc information* (elapsed time)
A Disc information* (remaining time) A HDMI information
A OFF
(*not available during the program/random playback)
: :
-- -- -- --
3) When the disc reaches the point you want to set a marker,
press [ENTER].
MP3 JPEG
OFF A File name information A File information (elapsed time*)
A HDMI information A OFF
(*not available for JPEG)
ⅥTitle information
• The title or track and elapsed playback time will appear on
the screen.
4) Press [SEARCH MODE] or [RETURN] to exit.
5) To return to the marker later, call the marker setting by
pressing [SEARCH MODE] repeatedly during playback or in
stop mode, and use [Y / Z] to choose a desired marker,
then press [ENTER].
WMA
0:04:00
1/10
OFF A File name information A Tag information (title name)
A Tag information (artist name) A File information (elapsed time)
A HDMI information A OFF
Note
7. Current title number/total number of titles
8. Elapsed time/remaining time of the current title
• Opening the disc tray, turning off the power or selecting “AC”
at step 2 and pressing [ENTER] will erase all markers.
• To clear a marker, use [Y / Z] to select the marker number to
be cleared and press [CLEAR].
®
DivX
OFF A File name information A File information (elapsed time)
A File information (remaining time) A HDMI information A OFF
• You can mark up to 9 points.
• For BD-video, marker search between different titles is not
available.
• For audio CD, MP3, Windows Media™ Audio and JPEG, during the
program or random playback, the indication will be displayed
after the track/file information.
• For BD, you can return to the maker only during playback.
20
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
ⅥBit rate information
ⅥFile name information
1
18
MP3 MUSIC
A
B L1
18. Media icon and File name
<For VR mode DVD-RW/-R>
: MP3 file
: Windows Media™ Audio file
DivX® file
11
: JPEG file
:
AORG
ⅥTag information
19
9. Bit rate (the amount of video data currently being read)
10. Layer number (Only for 2-layered discs)
(L0: Layer 0 is played back. L1: Layer 1 is played back)
11. Type of title (ORG: original, PL: playlist)
TITLE
[POP UP MENU /
MENU]
[TOP MENU]
[U / V / Y / Z]
ⅥTrack/File information
[ENTER]
[AUDIO]
[SUBTITLE]
[DISPLAY]
12
13
14
15
[DISPLAY]
2/5 0:00:00 SD
T
20
ARTIST NAME
12. Current track (file) number/total number of track (file)
13. Elapsed time/remaining time of the current track (file)
14. Indication of SD Memory Card playback
15. Current repeat setting (Only when repeat setting is active)
(T: Track/file repeat, G: Group repeat, A: All repeat)
19. Title name based on tag information of current Windows
Media™ Audio file
20. Artist name based on tag information of current Windows
Media™ Audio file
ⅥDisc information
16
17
ⅥHDMI information
About the button names in this explanation
< >: Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
21
22
1/10 0:04:00
A
Video Info.
Audio Info.
Max Channel
:
:
:
YCbCr
/
1080i
Buttons on the main unit and remote control
23
Dolby Digital
6ch
16. Current track number/Total number of tracks
17. Elapsed time/remaining time of the current disc
21
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
21. HDMI video format
Ⅵ
Selecting Subtitle Language
®
BDAV DVD-V DVD-VR CD DivX
22. Resolution of the HDMI output image
23. HDMI audio format
24. Maximum numbers of audio channels that can be accepted
by the connected device
1) During playback, press [AUDIO].
2) Use [U / V] to select your desired audio stream/channel.
®
DivX
BD-V
DVD-V
BD, DVD-video and DivX® may have subtitles in 1 or more
languages. Available subtitle languages can be found on the disc
case. You can switch subtitle languages anytime during playback.
1
ENG
Dolby D
5.1ch
/3
Note
• For audio CD, you can select following options.
Ⅵ
BD-V
• If HDMI is not connected, “---” will be displayed for HDMI
information.
“Stereo” : Both right and left channels are active (stereo)
“L-ch”
“R-ch”
3) Press [AUDIO] to exit.
1) During playback, press [SUBTITLE].
2) Use [U / V] to select “Primary Subtitle”, “Secondary
: Only left channel is active
: Only right channel is active
Subtitle” or “Subtitle Style”, then press [ENTER].
Selecting the Format of Audio and Video
Selecting Audio Streams/Channels
Primary Subtitle
Secondary Subtitle
Subtitle Style
2.ENG/255
2.ENG/255
2/25
Note
• For BDAV mode BD-RE/-R and VR mode DVD-RW/-R with MTS
(Multi-channel Television Sound) system, you can switch
between “1.Main” (main audio), “1. Sub” (sub audio), and
“1.Main/Sub” (main and sub audio).
®
BD-V BDAV DVD-V DVD-VR CD DivX
“Primary Subtitle”: Sets the subtitle for the main picture.
“Secondary Subtitle”: Sets the subtitle for the sub-picture.
Some BD and DVD contain multiple audio streams. Those are
often in different audio languages or audio formats. For BD
available audio varies depends on the “BD Audio Mode” setting.
Refer to page 23 for more information.
“Subtitle Style”:
Sets style of the subtitle.
3) Use [U / V] to select your desired subtitle.
4) Press [SUBTITLE] to exit.
• For some BD, secondary audio will be output even when sub-
picture is off.
• The sound mode cannot be changed during playback of discs
not recorded in multiple sound.
• Some discs allow to change audio language setting on the
disc menu. (Operation varies between discs. Refer to the
manual accompanying the disc.)
• Pressing [AUDIO] may not work on some discs with multiple
audio Streams/Channels (e.g. DVD which allow to change
audio setting on the disc menu).
the code will be displayed every time you change the Audio
Language setting. If you choose any other Languages, “---”
will be displayed instead (refer to page 39).
• Audio Language selection cannot be made during dialog
speed (refer to page 17).
Ⅵ
®
DVD-V DivX
Ⅵ
BD-V
1) During playback, press [SUBTITLE].
2) Use [U / V] to select your desired subtitle.
1) During playback, press [AUDIO].
2) Use [U / V] to select “Primary” or “Secondary” audio to
set, then press [ENTER].
1
ENG
/3
Primary
3) Press [SUBTITLE] to exit.
1
ENG
Secondary
ENG
Dolby D
Multi-ch
Multi-ch
/3
/3
2
Dolby D +
Note
• Some discs will only allow you to change the subtitle from the
disc menu. Press [TOP MENU] or [POP UP MENU / MENU] to
display the disc menu.
“Primary”
: Sets the audio for the main picture.
“Secondary” : Sets the audio for the sub-picture. When
sub-picture is on, the “Secondary” audio will
• If 4 digit language code appears in the subtitle menu, refer to
“Language Code” on page 39.
be output with the sub-picture.
• If the disc has no audio language, “Not Available” will be
displayed.
• In order to listen to the secondary audio, the “BD Audio Mode”
must be set to “Mix Audio Output”. Refer to page 23.
3) Use [U / V] to select your desire audio stream/channel.
• If the disc has no subtitle language or subtitle style, “Not
Available” will be displayed.
• For discs with DivX® files, only MP3, MP2 or Dolby Digital
audio is displayed. Other audio will be displayed with “---”.
• For DTS-CD(5.1 music disc), selecting audio streams or
channels is not available.
• For DivX®, the screen only displays the number of subtitle
languages.
4) Press [AUDIO] to exit.
22
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
Virtual Surround
Setting the BD Audio Mode
BD-V
BD-V
BDAV DVD-V DVD-VR
BD audio mode is to choose between two ways; you could output
the secondary and interactive audio accompanied by the primary
audio or you could output the primary audio only. Depending on
the setting of the mode, Dolby Digital, DTS, Dolby Digital Plus,
Dolby TrueHD, or DTS-HD output changes between Multi LPCM
and bitstream.
You can enjoy stereo phonic virtual space through your existing
2-channel stereo system.
1) In stop mode, press [MODE] repeatedly until the virtual
surround setting appears.
Off
1) In stop mode with BD inserted, press [MODE].
2) Use [U / V] to select desired setting.
If it is available, BD video's secondary and interactive audio will be
output with the primary audio.
2) Use [U / V] to select “1” (Natural effect), “2” (Emphasized
effect) or “Off”.
3) Press [RETURN] to exit.
Note
• The secondary audio is the audio for the sub picture
(Director's comment etc.) and the interactive audio is the
audio for the interactive application (Button click sounds
etc.).
• Select virtual surround “Off” or lower the volume if the sound
is distorted.
• This function cannot be used during dialog speed (refer to page 17).
• For the virtual surround, audio signal will always be 2-channel LPCM.
Ⅵ“HD Audio Output”
Only the primary audio will be output. Set this mode in order to
output Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD sound of BD through HDMI connection.
Pure Direct Mode
[U / V / Y / Z]
BD-V BDAV DVD-V DVD-VR CD
MP3
[ENTER]
[RETURN]
3) Press [RETURN] to exit.
®
WMA DivX
• You can also set “BD Audio Mode” from the setup menu.
Refer to page 32.
Use this function to shut down unused circuitry to achieve high
quality analog sound.
[MODE]
[PURE DIRECT]
1) Press [PURE DIRECT] repeatedly to select your desired pure
Note
direct mode.
• In “Mix Audio Output” mode, even you set “HDMI
Multi(Normal)” in “HDMI Audio Out” setting, multi LPCM will
be output from HDMI OUT for BD audio. Refer to page 11.
• In “Mix Audio Output” mode with HDMI audio being output,
for BD audio.
• Each time you press [PURE DIRECT], the pure direct mode
changes as “Normal” A “Video Off” A “Display Off” A
“All Off” A “Normal”. The modes will be displayed on the
front panel display.
Video / audio outputs for each mode
“Normal”
:
Normal playback mode (pure direct mode
is off).
• In “Mix Audio Output” mode with “HDMI Audio Out” set to
“Audio Mute” and “Digital Out” set to “Bitstream”, DTS,
DTS-HD and LPCM will be output as Dolby Digital for BD
audio. Refer to page 12.
• In “Mix Audio Output” mode, from 7.1ch AUDIO OUT, Dolby
Digital Plus, Dolby TrueHD and DTS-HD will be output as
multi LPCM decoded from its corresponding core stream.
“Video Off”
:
:
Video signal will not be output.
“Display Off”
Circuitry for front panel display and
indicators will be shut down.
“All Off ”
:
Video signal will not be output and
circuitry for front panel display and
indicators will be shut down.
About the button names in this explanation
< >: Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Buttons on the main unit and remote control
Note
• If you turn off the unit or put this unit to standby mode, the
pure direct mode will go back to “Normal”.
23
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
ⅥGamma correction
Adjusting the Picture
• To adjust “Gamma Correction”, after selecting the item at step 3,
press [ENTER], then use [U / V / Y / Z] to adjust the setting.
• In the graph of gamma correction, the horizontal axis indicates
the brightness level of the image that is recorded on the disc,
and the vertical axis indicates the brightness level of the image
when it is output from this unit.
Memory 1
GO : 0 2 4
5. Gamma Correction
®
DVD-VR DivX
BD-V BDAV DVD-V
You can adjust the picture quality and store the setting you have
adjusted on memory 1-5.
255
1) During playback, press [MODE] repeatedly until the picture
adjustment menu appears.
• Picture adjustment menu:
Memory 1
GO : 0 2 4
5. Gamma Correction
0
Memory 1
0
255
255
2) Use [U / V] to select a memory from “Memory 1” to
“Memory 5” to store your setting, then press [ENTER].
3) Use [U / V] to select a item to be adjusted, then use [Y / Z]
to adjust the setting.
• When dark points of the disc side are adjusted to the “bright” of
the output side, the fine parts of the dark portion that normally
become hard to see, become an easily discerned image.
4) Press [RETURN] repeatedly to exit.
Memory 1
14.V_Position Control
1.Contrast
0
0
+1
0
Note
0
255
2.Brightnes
s
• This setting is not effective for the picture output from VIDEO
OUT and S VIDEO OUT jack.
• To reset to the default setting, press [RETURN], use [U / V]
to select “STD”, then press [ENTER].
• The setting remains even you turn off the unit.
• You cannot adjust the setting during the rapid playback, or
when the pure direct is set to “Video Off” or “All Off”.
• DNR can also be adjusted by pressing <VIDEO NR (NOISE
REDUCTION)> on the front panel. (refer to page 7.)
• When bright points of the disc side are adjusted to the “dark” of
the output side, the fine parts of the bright portion that normally
become hard to see, become an easily discerned image.
List of picture adjustment item/values
Item
Description
Adjustment range (default)
1. Contrast
Adjusts the difference between the bright and dark parts of the picture.
Adjusts the brightness of the picture.
-6 to +6 (0)
0 to +12 (0)
0 to +11 (0)
Off to +3 (Off)
2. Brightness
3. Enhancer*1
Strengthens the contours of the picture.
Reduces the overall level of noise on the picture.
Detailed adjustment of the picture’s brightness.
Adjusts the sharpness of the picture for the medium frequency range.
Adjusts the sharpness of the picture for the high frequency range.
Adjusts the balance between the green and red.
Adjusts the white level.
Adjusts the black level.
Adjusts the density of the colors.
Makes the black parts of the pictures brighter.
4. DNR*1
5. Gamma Correction
6. Sharpness Mid*2
7. Sharpness High*1
8. Hue*2
9. White Level
10.Black Level*1
11.Chroma Level
12.Setup Level
16 to 235 (G0=24/G1=32/G2=48/G3=64/ G4=80/G5=96/ G6=128/G7=160/ G8=192/G9=224)
-6 to +6 (0)
-6 to +6 (0)
-6 to +6 (0)
-5 to +5 (0)
-5 to +5 (0)
-6 to +6 (0)
0 IRE : Shows the original picture as recorded.
7.5 IRE : Makes the dark parts brighter.
(7.5 IRE)
-7 to +7 (0)
-7 to +7 (0)
13.H_Position Control*1
14.V_Position Control*1
Adjusts the left/right position.
Adjusts the top/bottom position.
*1 Effective for the video signal of COMPONENT VIDEO OUT (except for 480i) and HDMI OUT jacks.
*2 Not effective for the video signal of HDMI OUT jack.
24
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
It is recommended that files to be played back in this unit are
recorded under the following specifications:
Playing Back an MP3, Windows Media™ Audio, JPEG
and DivX® File
B
H
G
<MP3 / Windows Media™ Audio>
• Sampling frequency
• Constant bit rate
: 44.1 kHz or 48 kHz
®
DivX
MP3 WMA
JPEG
: 112 kbps - 320 kbps (MP3),
48 kbps - 192 kbps (Windows
Media™ Audio)
Insert a DVD-RW/-R or CD-RW/-R with MP3,
Windows Media™ Audio, JPEG, DivX® files.
1
2
• The file list will appear on the screen.
• If file list does not appear automatically, press
[POP UP MENU / MENU].
<JPEG>
• Upper limit
: 2,560 x 1,900 dots
(sub sampling is 4:4:4)
5,120 x 3,840 dots
(sub sampling is up to 4:2:2)
• Press [POP UP MENU / MENU] to exit and resume
the file list.
Use [U / V] to select a desired folder or file, then
press [ENTER]. Use [Y / Z] to go back and forward
between the hierarchies.
• Lower limit
• File size of image maximum : 12 MB
: 32 x 32 dots
• If you press [ENTER] on the files playback will start.
<DivX®>
Official DivX® Certified product
DivX® 3.x, DivX® 4.x, DivX® 5.x,
DivX® 6.0
1
• Playable codec of AVI files
:
[POP UP MENU /
MENU]
• Maximum size of image
: 720 x 480 @30 fps,
720 x 576 @25 fps
File List
DIGITAL_BIT
[TOP MENU]
[U / V / Y / Z]
01_E0C0O0
• Sampling frequency of audio : 8 kHz - 48 kHz
• Audio type
02_E0C0O1
03_E0C0O0
04_E0C0O1
05_E0C0O0
06_E0C0O1
07_E0C0O0
1/3
: MPEG1 audio layer 3 (MP3),
MPEG1 audio layer 2,
Dolby Digital
4
[ENTER]
01_E0C0O0
Note
• The system can recognize up to 255 folders/999 files for CD,
999 folders/9999 files for DVD and SD Memory Card.
• The name of folder and file can be displayed up to 28 characters.
Unrecognizable characters will be replaced with asterisks.
• The 9th and deeper hierarchies cannot be displayed for CD
and the 10th and deeper hierarchies cannot be displayed for
DVD and SD Memory Card.
G
B
H
1. Current folder name (Disc or SD Memory Card name will be
displayed for the top of the hierarchies.)
2. List of the file/folder names in the current folder/disc
3. Selected file/folder name
4. Current page / total page number
5. Indication of previous/next page
• Files whose extension is other than “.mp3(MP3)”
“.wma(Windows Media™ Audio)”, “.jpg / .jpeg(JPEG)” or “.avi/
.divx” will not be listed.
• Some unplayable folders or files may be listed due to the
recording status.
• High-resolution JPEG files take longer to be displayed.
• Progressive JPEG files (JPEG files saved in progressive format)
cannot be played back on this unit.
• This unit recognize up to 8 characters of file name in the SD
Memory Card. Characters after 9th will not be displayed.
• Use H / G to go back and forward between the pages.
• Press [TOP MENU] to return to the first item.
Icons:
: Folders
About the button names in this explanation
: MP3 files
< >: Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
: Windows Media™ Audio files
: JPEG files
Buttons on the main unit and remote control
DivX® files
:
25
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
product
What is DivX®?
To Play Back the DivX® Subtitle Created by the
User.
• DivX® is a codec (compression/decompression) that can compress
images to a very small amount of data. The software can compress
video data from almost any devices to the size that can be sent on
the Internet without compromising visual quality of the images.
• A file with an extension of “.avi” and “.divx” is called an DivX®
file. All files with the DivX® extension are recognized as MPEG4.
• For more information for DivX®, please visit
• When you purchased or rented a DivX® file through the official
site of DivX® video which is called DivX® Video-On-Demand
(VOD) services, a registration code is required every time you get
the new file from the DivX® VOD services. Refer to “DivX(R) VOD”
on page 37.
The subtitle created by the user can be displayed during DivX®
playback.
1) After selecting the DivX® file, the “Subtitle List” will
appear when “DivX Subtitle” is set to anything other
than “Off”. (Refer to page 30.)
• Some DivX® VOD files are
DivX(R) VOD Rental
restricted with the limited
2) Use [U / V] to select the desired extension you want to
Note for DivX®
This rental has
views left.
playable times (you cannot play
them back beyond the limit). If
your DivX® VOD file has such limit,
the playback confirmation screen
will appear.
Do you want to use one of your views now?
display, then press [ENTER].
• Even if the file has an extension of either “.avi” and “.divx”, this
unit cannot play it back if it is recorded in the format other
than DivX®.
Subtitle List
Yes
No
File :
File name1
[Off]
• It may take a while for audio and images to be output after
[ASS]
[SMI]
[SRT]
[SSA]
[SUB]
• Use [Y / Z] to select “Yes” if you want to play back the file, or to
select “No” if you do not wish to play it back. Then, press [ENTER]
to confirm the selection.
you inserted a disc and pressed B.
• When playing back the files recorded in high bit rates, the
images can be interrupted in some occasions.
File List : MENU
[TXT]
• You cannot play back the
• Although DivX® logo has been obtained for this unit, it may
not be able to play back some data, depending on the
characteristics, bit rates, or audio format settings, etc.
• A DivX® file whose file size exceeds 2 GB cannot be played back.
• If a large-sized DivX® file is selected, it may take awhile to start
the playback (over 20 seconds sometimes).
Rental Expired
DivX® VOD files, of which rental
DivX® with the subtitle starts playback. The subtitle cannot be
displayed when the setting is “Off”.
• If there is more than one extension, the extension selection
appears in the subtitle list.
This rental is expired. Please push ‘MENU’.
period has been expired. In such
case, press [POP UP MENU /
MENU] and select other files that
can be played back.
• If you insert a DVD-RW/-R, CD-RW/-R with DivX® files that are
mixed with MP3/Windows Media™ Audio/JPEG files, the
playback media selection screen will be displayed. Use [U / V]
to select your desired media to play back then press [ENTER].
• If you try to playback the DivX® file that has the screen
resolution which this unit does not support, the playback will
be stopped and error message will appear.
• You cannot play back the
Authorization Error
DivX® VOD files obtained with
• Some DivX® files cannot be played back on this unit due to
the configuration and characteristics of the disc, or due to the
condition of recording and authoring software.
unit.
This player is not authorized to play back this video.
different registration codes on
Please push ‘MENU’.
this unit. Press [POP UP MENU /
MENU] and select other files that
can be played back.
Please select the media to play back.
Video
Audio & Picture
Note for DivX® Subtitle
• You cannot playback the DivX®
Resolution Error
• To utilize this function, the following conditions must meet.
- “DivX Subtitle” must be activated in “Language” setting.
(Refer to “DivX Subtitle” on page 30.)
file that has the resolution which
This player does not support this video format.
this unit does not support. This
Please push ‘MENU’.
unit does not support the DivX®
- Playback file and the subtitle file must have the same name.
- Playback file and the subtitle file must locate in the same folder.
- Only the subtitle files with the following extensions are
supported; .smi (.SMI), .srt (.SRT), .sub (.SUB), .ass (.ASS), .ssa
(.SSA), .txt (.TXT). (.sub (.SUB) and .txt (.TXT) files may not be
recognized.)
files that have the image size that
exceeds 720 x 480 @ 30fps or
720 x 576 @ 25fps.
• Press [TOP MENU] to call up the playback media selection
screen in stop mode.
- The subtitles that exceeds the playback time of the DivX® file
will not be displayed.
26
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
Kodak Picture CD
Reading the SD Memory Card
C
B
MP3
JPEG
WMA
JPEG
You can play back the MP3, Windows Media™ Audio and JPEG files
in an SD Memory Card. With the SD Memory Card, you can also
enjoy the special additional contents for BD-ROM Profile 1.1 which
can be downloaded from the internet. You can store the contents
on an SD Memory Card via computer and play them back with the
BD-video. For more information about the special additional
contents, please refer to the instruction book that came with the
disc.
This unit can also run JPEG files stored on Kodak Picture CD. You
can enjoy picture images on the display device set by playing back
the Picture CD. This unit confirms to ver.7.0 of Kodak Picture CD.
For details of Kodak Picture CD, contact a shop that provides
developing service of Kodak Inc.
When Kodak Picture CD is inserted in this unit, Kodak
Picture CD menu appear automatically on the screen.
1
Picture1
Picture4
Picture2
Picture3
Picture6
Picture5
3/32
ⅥSetting the media mode
Press [SETUP] in stop mode.
1
[POP UP MENU /
MENU]
1. Current track number/the total number of tracks
2. Indication of previous/next page
[U / V / Y / Z]
Use [Y / Z] to select
, then press [ENTER].
• In stop mode, press [POP UP MENU / MENU] to call Kodak
Picture CD menu.
2
3
4
5
[SETUP]
[ANGLE]
[ENTER]
[MODE]
B
Use [U / V / Y / Z] to select a desired track to be
played back, then press B or [ENTER].
• An image will be played back from the selected track
and go to the next one in turn.
Use [Y / Z] to select
, then press [ENTER].
2
Use [U / V] to select “Media Select”.
C
Press C to stop playback.
3
Press [ENTER] repeatedly to select “SD Memory”.
Tips for JPEG/Kodak Picture Playback
• Every press on [ANGLE] will turn the image clockwise by 90
degrees when an image is displayed.
Others
• To change the visual effect for switching the playback image,
press [MODE] once, then use [U / V] or [ENTER] to switch
between “Cut In/Out” and “Fade In/Out”. The size change
may have no effect on some files (e.g. files with a small picture
size).
• To change the size of the playback image, during the JPEG/
Kodak Picture playback. Press [MODE] twice, then use
[U / V / Y / Z] or [ENTER] to switch between “Normal”
(100%) and “Small” (93%). The size change may have no effect
on some files (e.g. files with a small picture size).
Power Saving
Remote Control Setting BD1
Media Select
On
SD Memory
About the button names in this explanation
< >: Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
• This will set the unit to “SD Memory” mode. To play
back the contents in any discs, exit “SD Memory”
mode by selecting “Disc”.
Buttons on the main unit and remote control
Press [SETUP] to exit.
6
27
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
ⅥInserting the SD Memory Card and playback
Insert an SD Memory Card into the SD CARD slot
until it clicks with the label facing up.
File list will appear.
1
SD Memory Card
Follow the step 2 in “Playing Back an MP3,
Windows Media™ Audio, JPEG and DivX® File” on
2
page 25.
ⅥRemoving the SD Memory Card
In stop mode, push the SD Memory Card and then
slowly remove your finger.
1
Grasp the card and pull it out from the SD CARD
slot.
2
Compatible Cards:
- SD Memory Card (8MB - 2GB)
- SDHC Memory Card (4GB)
- miniSD Card (8MB - 2GB)
- microSD Card (8MB - 2GB)
• For miniSD Card and microSD Card, adapter will be required.
Note
• Do not remove the card during its playback.
• This unit supports SD Memory Card with FAT12/FAT16 file
system, and SDHC Memory Card with FAT32 file system.
• Do not delete the folders or files in the SD Memory Card with
your computer. This unit might not read the SD Memory Card.
• This unit recognizes up to 8 characters of file name in the SD
Memory Card. Characters after 9th will not be displayed.
28
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
Press [SETUP] to exit.
Using the Setup Menu
B
5
In the setup menu you can change the setting for audio, video,
language, etc. You cannot change the setting during playback.
Quick
Custom
Quick setting menu contains setting items extracted from
custom setting menu which may be used frequently.
Custom menu contains all the setting items.
Press [SETUP] in stop mode.
Press [SETUP] in stop mode.
1
1
Use [Y / Z] to select
, then press [ENTER].
Use [Y / Z] to select
, then press [ENTER].
2
3
2
[the Number buttons]
[CLEAR]
Use [Y / Z] to select your desired setting category,
then press [ENTER].
Quick
: Language
: Video
: Audio
: Ratings
: Others
BD Audio Mode
HDMI Audio Out
HDMI Video Resolution
Component Output
7.1ch Audio Out
OSD Language
TV Aspect
Mix Audio Output
HDMI Multi (Normal)
Auto
[U / V / Y / Z]
• For “Ratings”, follow the procedure on page 36.
[ENTER]
Use [U / V] to select setting items.
480i
[SETUP]
[RETURN]
Multi Channel
English
• The setting items which are not available with current
situation of this unit will be displayed in gray and you
cannot select the items.
4
5
16:9 Wide
Follow the procedure below depending on the
setting items.
For setting item A:
B
Use [U / V] to select setting items.
Press [ENTER] repeatedly to change options.
3
4
• For “DivX(R) VOD”, press [ENTER] to display your
registration code.
For setting item B:
Follow the procedure below depending on the
setting items.
For setting item A:
Press [ENTER] repeatedly to change options.
For setting item B:
1)Press [ENTER].
2)Use [U / V] to select options, then press [ENTER].
• Use [Y] or [RETURN] to go back to the previous
screen.
1) Press [ENTER].
2) Use [U / V] to select options, then press
[ENTER].
• Use [Y] or [RETURN] to go back to the previous
screen.
About the button names in this explanation
< >: Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Press [SETUP] to exit.
6
Buttons on the main unit and remote control
29
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
Ⅵ
Video
Ⅵ
Language
Video
Video
Language
TV Aspect
16:9 Wide
YCbCr
Normal
Max
Component Output
Progressive Mode
Audio/Video Sync
Still Mode
480i
Dialog
Original
Off
HDMI Select
Auto
HDMI
Auto
Full
Subtitle
HDMI RGB Setting
HDMI Auto Format
HDMI Video Resolution
HDMI Deep Color
I/P Direct
Disc Menu
English
English
Off
OSD Language
DivX Subtitle
Auto
TV Active Area
Wall Paper
Auto
Picture
Off
• For how to select the setting items and options, refer to “Custom” on page 29.
• For how to select the setting items and options, refer to “Custom” on page 29.
Setting items Options
TV Aspect
Setting items
Options
16:9 Wide*:
Dialog
Sets the language for audio.
Original*/English/French/Spanish/German/Italian/
Swedish/Dutch/Russian/Chinese/Japanese/Korean/
Danish/Finnish/Norwegian/Icelandic/Hungarian/
Romanian/Turkish/Greek/Irish/Portuguese/Polish/
Czech/Slovak/Bulgarian/Other
Select this when a wide-screen TV is connected.
Disc recorded in wide screen format is played over the
entire screen.
Sets a picture size according to
aspect ratio of the connected
display device.
4:3 Pan & Scan:
Select this to play back the disc recorded in wide screen
format with 4:3 TV in the pan & scan mode (with the
sides of the picture cut off). Discs which pan & scan is
not specified are played in the letter box mode.
Subtitle
Sets the language for subtitle.
Off*/English/French/Spanish/German/Italian/Swedish/
Dutch/Russian/Chinese/Japanese/Korean/Danish/
Finnish/Norwegian/Icelandic/Hungarian/Romanian/
Turkish/Greek/Irish/Portuguese/Polish/Czech/Slovak/
Bulgarian/Other
4:3 Letter Box:
Select this to play back the disc recorded in wide screen
format with 4:3 TV in the letter box mode. (with black
strips at the top and bottom).
4:3 Squeeze Auto:
When playing 4:3 images, the picture is displayed in the
center of the 16:9 screen with a 4:3 aspect ratio.
Disc Menu
Sets the language for disc menu.
English*/French/Spanish/German/Italian/Swedish/
Dutch/Russian/Chinese/Japanese/Korean/Danish/
Finnish/Norwegian/Icelandic/Hungarian/Romanian/
Turkish/Greek/Irish/Portuguese/Polish/Czech/Slovak/
Bulgarian/Other
English*/Français/Español
OSD Language
Sets the language for OSD
(on-screen display).
4:3 Squeeze On:
The picture is displayed in the center of the 16:9 TV
screen with a 4:3 aspect ratio, regardless of the original
image size.
DivX Subtitle
Sets the language for DivX®
Subtitle.
Off* / English / French / Spanish
Select an HDMI output mode
between “YCbCr” and “RGB”.
YCbCr*:
Component format video signals and audio signals are
output from the HDMI OUT.
• Settings with (*) are the default.
• Quick menu consists of the setting menus frequently used, and they are accompanied with
RGB:
mark.
RGB format video signals and audio signals are output
from the HDMI OUT.
• If you select “Other”, enter the 4-digit number code for the desired language (refer to “Language
Code” on page 39). Only the languages supported by the disc can be selected.
30
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
Setting items
HDMI RGB Setting
Sets the digital RGB image range
(data range) output from the HDMI
OUT.
Options
Setting items
Component Output
Sets the video resolution for
component output.
Options
480i*
480p
720p
1080i
Auto*:
Normal*:
Output as “16 (black)” to “235 (white)”.
Enhanced:
Output as “0 (black)” to “246 (white)”.
Depending on the display device you are using, the
black colors may seem to stand out when using HDMI
connections. If so, set to “Enhanced”.
Progressive Mode
Sets the optimum progressive
mode for the image material
output from HDMI OUT jack and
COMPONENT VIDEO jacks.
The progressive mode will be selected automatically
depends on the material type (film or video).
Video1:
HDMI Auto Format
Makes the setting of the “Auto” for
“HDMI Video Resolution”.
Max*:
Suited for playing video material discs.
The maximum resolution that can be input to the
connected HDMI device is detected and the HDMI
output resolution is selected automatically.
Video2:
Suited for playing video material discs and 30-frame film
material discs.
HDMI*:
Panel:
Audio/Video Sync
Sets which video signal to
synchronize the audio signal with.
The number of pixels of the connected HDMI device’s
panel is detected and the HDMI output resolution is
selected automatically.
Synchronizes the audio with the video signal from HDMI
OUT.
Progressive:
Auto*:
HDMI Video Resolution
Synchronizes the audio with the progressive video
signal from COMPONENT VIDEO OUT.
HDMI video resolution will be selected automatically
depending on the connected HDMI device and setting
of the “HDMI Auto Format”.
Sets the HDMI video resolution.
Interlace:
Synchronizes the audio with the Interlace video signal
from COMPONENT VIDEO OUT(480i), VIDEO OUT or
S VIDEO OUT.
480p
720p
1080i
1080p
Other:
Select this when you want to view progressive,
interlaced and HDMI pictures simultaneously. The audio
signals are set to the optimum timing for the respective
pictures. (They are not synchronized.)
1080p24:
Gives a natural and high quality film reproduction of 24-
frame film material. The connected display device has to
be compatible with 1080p24 frame input.
Still Mode
Adjusts picture resolution and
quality in still mode.
Auto*:
HDMI Deep Color
Auto*:
Automatically selects the best resolution setting
(“Frame” or “Field”) based on the data characteristics of
the pictures.
Sets whether output the picture
from HDMI with the Deep Color or
not.
The picture through the HDMI will be output with Deep
Color if connecting device supports Deep Color.
Off:
The picture through the HDMI will be output without
Deep Color.
Off*:
Field:
Stabilizes the pictures, although the picture quality may
become coarse due to the limited amount of data.
Select “Field” when the pictures are still unstable even if
“Auto” is selected.
I/P Direct
Sets whether output the 24-frame
24 frame material will be converted to 60 frame and
material directly from the HDMI OUT output 1080p60 frame from the HDMI OUT.
Frame:
or not. This setting is for BD only.
On :
Displays relatively motionless pictures in higher
resolution. “Frame” improves the picture quality,
although it may unstabilize the pictures due to alternate
output of two field data.
24 frame material will be output directly 1080p24 frame
from the HDMI OUT.
31
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
Setting items
TV Active Area
Sets the horizontal display area for
interlace (480i) output.
Options
Ⅵ
Audio
Normal:
Select this if the image is not stable with connecting to
professional-use display.
Full*:
Audio
Audio
Select this for connecting to commonly-marketed
display.
Picture*
Blue
Black
Gray
BD Audio Mode
HDMI Audio Out
7.1ch Audio Out
Down Sampling
DRC
Mix Audio Output
Audio Adjust
0ms
Off
Wall Paper
HDMI Multi (Normal)
Virtual Surround
Sets the picture to be displayed on
the screen for stop mode or audio
playback mode.
Multi Channel
Off
Auto
Off
Source Direct
Bass Enhancer
Off
• Settings with (*) are the default.
• Quick menu consists of the setting menus frequently used, and they are accompanied with
mark.
• For how to select the setting items and options, refer to “Custom” on page 29.
Setting items Options
BD Audio Mode
• For “HDMI RGB Setting”, select “Enhanced” if the black-white contrast is not clear. The setting is
effective only for HDMI RGB output.
• Even if “HDMI Video Resolution” is set to “1080p24” and “I/P Direct” is set to “On”, for the BD that
is not recorded by 1080p24 frame or for DVD, a video resolution supported by the disc and the
display device will be output instead of 1080p24 frame.
• An individual picture on the screen is called as “Frame” , which consists of two separate images
called as “Field”. Some pictures may be blurred at the auto setting in “Still Mode” due to their
data characteristics.
• If the picture is not output properly to the display device because of the “HDMI Video
Resolution” or “Component Output” setting, press and hold B on the front panel for more than
5 seconds. Both settings will be reset to the default automatically.
• If “Component Output” is set to “480i”, “4:3 Squeeze Auto” and “4:3 Squeeze On” in “TV Aspect”
are not available.
Output the secondary and interactive audio with
For BD, select whether to output
the secondary and interactive
audio with primary audio if it is
available or only the primary
audio. Refer to “Setting the BD
Audio Mode” on page 23.
primary audio if it is available.
HD Audio Output:
Output only the primary audio. Set this mode in order to
output Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS or DTS-HD sound of BD through HDMI connection.
HDMI Multi(Normal)*:
The multi-channel audio signals are output from the
HDMI OUT with a bitstream or LPCM.
HDMI Audio Out
• If HDMI is connected, for video resolution for the component output, you can only select video
resolution that currently output from HDMI OUT or 480i.
Sets the audio format for the audio
output from the HDMI OUT.
• If the video resolution for the component output and HDMI video resolution does not match, the
video resolution for the component output will be switched to current HDMI output resolution.
COMPONENT VIDEO OUT jacks may not output any signals depend on the disc material.
• If you play back copy-protected DVD video, 480p signal will be output from the COMPONENT
VIDEO OUT jacks, when “Component Output” is set to “720p” or “1080i”.
• If connected display device does not support 1080p24 frame or “I/P Direct” is set to “Off”,
“1080p24” in “HDMI Video Resolution” will be displayed in gray and you can not select the item.
• For playing back BD, if you set “Component Output” to “480i”, 480p signal will be output from
the COMPONENT VIDEO OUT jacks.
HDMI Multi(LPCM):
The multi-channel audio signals are output from the
HDMI OUT with a LPCM.
• Refer to pages 34-35 for setting options.
HDMI 2ch:
The audio signals are output from the HDMI OUT with a
downmixed to 2ch LPCM.
• The setting items which are not available with current situation of this unit will be displayed in
gray and you cannot select the items.
• Even if “HDMI Select” is set to “YCbCr”, if the display device does not support YCbCr, RGB will be
output.
• If “HDMI Video Resolution” is set to “1080p” or “1080p24”, you cannot set “Component Output”.
Audio Mute:
Mutes the HDMI audio signal, and set the signal format
of the DIGITAL OUT.
• Refer to the “Digital Out Setting” on page 33 for setting
options.
• The default setting of the “BD Audio Mode” is “Mix Audio Output”. If you want to output only the
high quality primary audio, set “BD Audio Mode” to “HD Audio Output”.
32
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
Setting items
7.1ch Audio Out
Sets the audio format for the audio
output from the 7.1ch AUDIO OUT.
Options
Setting items
Virtual Surround
Sets to create a surround effect in
a system with 2 speakers
connected.
Options
Multi Channel*:
Off*:
The multi-audio signals are output from the 7.1ch
AUDIO OUT. Refer to pages 34-35 for setting options.
Virtual surround is set to off.
2 Channel:
1:
Down-mixed 2-channel audio signals are output from
the 7.1ch AUDIO OUT jacks.
A natural surround effect in a system with 2 speakers
connected.
Down Sampling
On:
2:
Sets the digital audio output when
playing BD or DVD recorded in
LPCM.
LPCM signals are converted to 48 kHz for output.
• Set to “On” when using digital connections to an AV
amplifier that is not compatible with sampling
frequencies of 96 kHz.
A stronger surround effect in a system with 2 speakers
connected than "1".
• Settings with (*) are the default.
• Quick menu consists of the setting menus frequently used, and they are accompanied with
mark.
Off*:
• If you set “Source Direct” to “On”, “HDMI Audio Out” to “HDMI 2ch” or “7.1ch Audio Out” to
“2 Channel”, “Bass Enhancer” is not available.
• Under following circumstances, “HDMI Multi(Normal)”, “HDMI Multi(LPCM)” and “HDMI 2ch” is
For BD or DVD recorded in LPCM without copyright
protection, 2-channel audio signals up to 192 kHz are
output as LPCM signals with no conversion.
not available.
DRC
Auto*:
- HDMI cable is not connected to HDMI OUT jack.
- Connected display device is off.
- Connected display device is not compatible with audio output.
• When “Source Direct” is set to “On”, “Bass Enhancer” and “Speaker Configuration” are not
available.
Sets whether to compress the
range of sound volume (Dynamic
Range Control) when Dolby Digital,
Dolby Digital Plus or Dolby TrueHD
audio is played back.
When the discs that are recorded in the Dolby TrueHD
format is in playback, this unit detects DRC setting of
the disc and set the DRC setting of this unit to “On” or
“Off” automatically.
Off
Digital Out Setting
When the “Audio Mute” is selected in “HDMI Audio Out” setting, audio signal of the HDMI is muted
and the audio signals output from DIGITAL OUT changes depending on the “Digital Out” setting.
On
Source Direct
On:
<“Digital Out” setting>
Audio A HDMI Audio Out A Audio Mute
Sets to output the audio without
adding speaker settings to the
audio signals from the disc.
Select this to output the audio without any effect of
speaker setting.
Off*:
Bitstream*:
When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD, the corresponding core stream (Dolby Digital or DTS) are output.
Select this to output the audio with the effect of
speaker setting.
Bass Enhancer
On:
LPCM:
Sets whether to output the
subwoofer when playing back
content that does not have LFE
(Low Frequency Effect) signal.
(e.g. content with only 2 channel
audio signal.)
Audio signal will be output from the subwoofer. (Please
set “Subwoofer” in the “Speaker Configuration” to
“On”.)
LPCM signal will be output from DIGITAL OUT.
• This setting is not effective when the HDMI audio signal is output.
• When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently
output from the HDMI OUT will be output from the DIGITAL OUT jack as well, except that Dolby
Digital signal will be output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be
output instead of DTS-HD.
• When “BD Audio Mode” is set to “HD Audio Output”, Dolby Digital Plus, Dolby TrueHD, or DTS-HD
will be output as core stream (Dolby Digital or DTS). If the audio source is Dolby Digital, DTS, or
LPCM, the same audio stream type set in the “HDMI Audio Out” will be output. (When outputting
Multi LPCM from HDMI OUT, 2ch Downmix LPCM will be output from DIGITAL OUT.)
• When “BD Audio Mode” is set to “Mix Audio Output”, the audio output from DIGITAL OUT will follow
the setting in the “HDMI Audio Out”. (When outputting Multi LPCM from HDMI OUT, 2ch Downmix
LPCM will be output from DIGITAL OUT.)
Off*:
No audio signal will be output from the subwoofer.
Audio Adjust
0ms to 200ms (0ms*)
The audio signal will be delayed for the amount of time
you set.
Sets the amount of the delay time
between the picture and audio
signal.
33
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Speaker Setting
Function Setup
How to navigate through the “HDMI Multi(LPCM)” and “Multi Channel” setting
1) Use [U / V] to select the menu item.
This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel
surround.
2) Use [U / V] to select setting items.
• Use [RETURN] to go back to the previous screen.
3) Use [Y / Z] to select desired options.(Except for “Test Tone” and “Default”.)
<Example of basic layout with 7.1ch surround system>
For “Test Tone”:
Use [Y / Z] to select “Manual” or “Auto”, then press [ENTER].
• The test tone will be output. If you select “Manual”, use [U / V] to select desired speaker, then use
[Y / Z] to adjust the volume. If you select “Auto”, use [Y / Z] to adjust the volume of the speaker
that output the test tone.
Front speaker (left)
Subwoofer
Front speaker (right)
• If you want to stop the test tone, press [RETURN].
For “Default”:
Press [ENTER] to reset the “Delay Time” setting to the default.
4) Press [SETUP] to exit.
Center speaker
Menu
Setting items
Front
Options
Large*
Descriptions
Speaker Configuration
Select the desired
speaker to set. Then
change the setting
appropriately by
referring to the
Large:
Surround speaker (left)
Surround speaker (right)
For the large speakers
with strong low frequency
reproduction capabilities.
Small:
For the small speakers
which do not provide
strong bass sound.
None:
Small
Center
Large*
Small/None
On*
Subwoofer
Surround
descriptions.
Surround back speaker (left)
Surround back speaker (right)
Off
Large*
No speakers.
For “Subwoofer” there is
only “On” or “Off”.
Small/None
Large*
To make the most of its feature, set up your speakers appropriately by referring to the table below.
Speaker setting options are available at the following locations;
<Speaker setting for the audio signal output from the HDMI OUT jack >
(Available when you have HDMI cable connected to the HDMI OUT jack)
Setup A Quick A HDMI Audio Out A HDMI Multi(LPCM)
Surround Back
Small/None
Crossover Freq:
For speakers set to
“Small”, the sound
with frequencies
below that of this
frequency are cut.
This bass sound that
has been cut is
40/60/80*/
100/120Hz
Select according to the
low frequency
reproduction capabilities
of the connected speaker.
Setup A Custom A Audio A HDMI Audio Out A HDMI Multi(LPCM)
<Speaker setting for the audio signal output from the 7.1ch AUDIO OUT jacks >
Setup A Quick A 7.1ch Audio Out A Multi Channel
Setup A Custom A Audio A 7.1ch Audio Out A Multi Channel
output from the
subwoofer or a
speaker for which
“Large” is set.
• For “Speaker Configuration”, the settings of each speaker sizes may be adjusted automatically
corresponding to each setting. (e.g. If the “Front” is set to “Small”, the “Subwoofer” will automatically
set to “On” and also you cannot set “Center”, “Surround”, and “Surround Back”, to “Large”.)
•
•
If you connect to 5.1-channel surround system, set “Surround Back” in “Speaker Configuration” to “None”.
“None” for “Center”, “Surround” and “Surround Back” is not available for the speaker setting for the
audio signal output from the HDMI OUT jack .
• “Off” for “Subwoofer” is not available for the speaker setting for the audio signal output from the
HDMI OUT jack.
34
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
Menu
Delay Time
This is a parameter
for optimizing the
timing at which the
sound is output from
the speakers
according to their
distance from the
listening position.
Setting items
Distance
Options
Feet*
Meters
Descriptions
Menu
Setting items
Test Tone:
“Test Tone” is the test
tone which can be
output from the
speakers so that you
can adjust the volume
for each speaker.
Options
Off*
Descriptions
Set the desired measure
system. This measure system
will be used for “Delay Time”
setting. Press [ENTER] to
switch the setting.
Channel Level
Tests or sets the
volume for each
speaker.
Select “Off” to deactivate
the “Test Tone” feature.
Select “Manual”, then
press [ENTER] to manually
set the volume for the
desired speaker.
Select “Auto”,then press
[ENTER] to automatically
output the test tone from
each speakers.
Manual
Auto
Front Lch
0ft to 60ft (12ft*) Select the distance from the
(0m to 18m
(3.6m*))
listening point to the
speaker to get the ideal
delay time.
Front Rch
Center
0ft to 60ft (12ft*)
(0m to 18m
(3.6m*))
0ft to 60ft (12ft*)
(0m to 18m
(3.6m*))
0ft to 60ft (10ft*)
(0m to 18m
(3.0m*))
0ft to 60ft (10ft*)
(0m to 18m
(3.0m*))
Front Lch
0 dB to -12 dB If you have selected
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
“Manual” in “Test Tone”,
select the desired speaker
to set and adjust the
volume for the selected
speaker.
If you have selected
“Auto” in “Test Tone”, test
tone will be output
automatically in order.
Adjust the volume of the
speaker that output the
test tone.
Center
Surround Lch
Surround Rch
Front Rch
Surround Rch
Surround Back Rch
Surround Back Lch
Surround Lch
Subwoofer
Surround Back Lch 0ft to 60ft (10ft*)
(0m to 18m
(3.0m*))
Surround Back Rch 0ft to 60ft (10ft*)
0 dB to -12 dB
(0 dB*)
(0m to 18m
(3.0m*))
Set “On” to increases the
volume level that is output
from the subwoofer by 10
dB.
Subwoofer
Default
0ft to 60ft (12ft*)
(0m to 18m
(3.6m*))
SW + 10 dB
(Not available for HDMI)
On/Off*
Select “Default”, then press
[ENTER], to reset the “Delay
Time” setting to the default.
• Settings with (*) are the default.
• For HDMI, “None” and “Off” options for “Speaker Configuration” are not available.
• For “Delay Time”, the difference among the value of the each speaker cannot exceed 15 ft (4.5m).
• If you want to stop the test tone, press [RETURN].
35
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
Ⅵ
Ratings
RATING EXPLANATIONS
Ratings control allows you to set a limit, which prevents your children from viewing inappropriate
materials. Playback will stop if the ratings exceed the levels you set, and it will require you to enter a
password before the disc will play back.
• All
• 8 [Adult]
: Parental control is inactive; all discs can play back.
: DVD software of any grades (adult/general/children) can be played
back.
• 7 [NC-17]
• 6 [R]
• 5 [PGR]
• 4 [PG13]
• 3 [PG]
• 2 [G]
: No one under 17 admitted.
: Restricted; under 17 requires accompanying parent or adult guardian.
: Parental guidance recommended.
: Unsuitable for children under 13.
: Parental guidance suggested.
Ratings
: General audience.
BD Rating Level
DVD Rating Level
Password Change
All
All
• 1 [Kid Safe] : Suitable for children.
C) Password Change
1) Use [U / V] to select “Password Change”, then press [ENTER].
2) Enter a new 4-digit password, then press [ENTER].
3) Press [SETUP] to exit.
1) Use [Y / Z] to select
, then press [ENTER].
2) Press [the Number buttons] to enter your 4-digit password.
For the first time use: Press [the Number buttons] to enter any 4-digit number (except for 4737),
then press [ENTER]. That number will be used as the password from the second time. Record your
password in case you forget it.
• If you forgot the password, enter [4], [7], [3], [7]. The password will be cleared and rating level
will be set to “All”.
• While you input the password, press [CLEAR] to clear the number, then re-enter the password.
Proceed to A – C
A) BD Rating Level
1) Use [U / V] to select “BD Rating Level”, then press [ENTER].
2) Use [U / V] to select your desired option, then press [ENTER].
“All”
: To release the limitation.
“Age Setting”: To set the age limitation.
• After selecting “Age Setting”, use [the Number buttons] to enter the age from 0 – 254, then
press [ENTER].
(e.g. for age 15, press [0],[1],[5])
3) Press [SETUP] to exit.
B) DVD Rating Level
1) Use [U / V] to select “DVD Rating Level”, then press [ENTER].
2) Use [U / V] to select a desired level, then press [ENTER].
3) Press [SETUP] to exit.
36
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
Ⅵ
Others
Setting items
Closed Caption
Options
On
Sets whether display the closed
caption or not using the caption
decoder (commercially available ).
Off*
Others
Others
Power Saving
On*:
Lower the power consumption for
standby mode by denying the
command from RS-232C during
standby mode.
Denies the command from RS-232C when the power is
Power Saving
On
Angle Icon
Off
in standby mode.
Remote Control Setting
Media Select
BD1
Disc
Screen Saver
Auto Power Off
Panel Display
Slide Show
On
On
Off:
Bright
5sec
Accepts the command from RS-232C when the power is
in standby mode.
DivX(R) VOD
Closed Caption
Off
Remote Control Setting
Changes the signal code of a
remote control. (Refer to page 6)
Media Select
Select the media to playback.
BD1*
BD2
• For how to select the setting items and options, refer to “Custom” on page 29.
Setting items Options
Angle Icon
Disc*:
Select this when you play back a disc.
SD Memory:
Select this when you play back a SD Memory Card.
On:
The angle icon appears on the screen when playback
the scene with various angle.
Off*:
The angle icon disappears on the screen.
On*:
If this unit is left with no activity for more than 5
minutes, the screen saver will be activated.
Initialize
Screen Saver
Initialize the setting or SD Memory Card.
Off:
Sets off the screen saver.
On*:
Initialize
Auto Power Off
If this unit is left with no activity for more than 30
minutes, this unit turns off automatically.
Initialize?
No
Off:
Setup
Memory Device
Sets off the auto power off.
Panel Display
Sets the brightness of the front
panel display.
Bright*:
Front panel display gets brighter.
Dimmer:
1) Press [SETUP] in stop mode.
Front panel display gets darker.
Auto:
2) Use [Y / Z] to select “Initialize”, then press [ENTER].
3) Use [U / V] to select a desired option, then press [ENTER].
Front panel gets darker during playback.
5sec*
“No”
:Exit without any initialization.
“Setup”
:Reset the SETUP setting to the factory default.
Slide Show
Sets the display time for the still
picture (in JPEG format) playback
“Memory Device” :Initializes the SD Memory Card. After confirmation message appears, use
[U / V] to select “Yes”, then press [ENTER].
10sec
4) Press [ENTER]. (For “Setup” and “Memory Device” only)
5) Press [SETUP] to exit.
For more information about DivX® VOD visit
DivX(R) VOD
Provides DivX® VOD registration
code.
Note
• The setting for “Ratings” will not be reset.
37
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Others
Others
Troubleshooting
If the unit does not perform properly when operated as instructed in this Operating Instruction, check the unit, consulting the following checklist.
Problem
Solution
Page
Problem
Solution
Page
No power
- Check if the AC cord is properly connected.
- Unplug the AC cord once, and wait for 5-10 seconds and then plug it
in again.
–
–
stops responding
- To completely reset the unit, unplug the AC cord from the AC outlet
for 5-10 seconds.
–
operating commands during
playback
14
No sound or picture
- Check if the connected display device is turned on.
- Check the HDMI connection. (Check the status of the HDMI related
indications.)
- Check the RCA audio/video cable connections.
- Check if the pure direct mode is set to “Video Off” or “All Off”. If it is
the case, set it to “Display Off” or “Normal”.
- Check whether the connected display device or other device supports
HDCP. (This unit will not output a video signal unless the other device
supports HDCP.)
–
10
Refer to the instructions of the disc.
The unit cannot read BD/DVD/CD
- Condensation ? (Let sit 1 or 2 hours)
3
4
10, 13
23
marks on page 4.
- Wipe the dirt off the disc or replace the disc.
4
12
Angle does not switch
- The angle cannot be switched for BD/DVD which do not contain
multiple angles. In some cases multiple angles are only recorded for
specific scenes.
19
- Check whether the output format of this unit (HDMI FORMAT)
matches the supported input format of other connected device.
- Check if the “HDMI Deep Color” is set to “Auto”. If it is the case, set it to
“Off”.
10,30,31
31
Playback does not start when the
title is selected
- Check the “Ratings” setting.
36
36
- Check if the “I/P Direct” is set to “On”. If it is the case, set it to “Off”.
31
–
been forgotten
- Enter the default password “4737”, then your forgotten password will
be cleared.
Distorted picture
- Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
- Connect this unit directly to the TV. If the RCA audio/video cables are
connected to a VCR, pictures may be distorted due to the copy
protection system.
10
Note
description in this Operating Instructions for details on correct operations.
Completely distorted picture or
black/white picture with BD/DVD
- Make sure the disc is compatible with this unit.
4
No sound or distorted sound
- Adjust the volume.
–
10,12,13
10
- Check that the speakers are connected correctly.
- Check the HDMI connections.
- Check the “Audio” settings.
32,33
Picture freezes momentarily during - Check the disc for fingerprints/scratches and clean with a soft cloth
4
playback
wiping from center to edge.
- Clean the disc.
4
Disc cannot be played back
- Clean the disc.
4
14
–
36
4
- Ensure the disc label is facing up.
- Check if the disc is defective by trying another disc.
- Cancel the ratings control or change the control level.
- Insert a correct disc that can be played back on this unit.
SD Memory Card cannot be read.
- The format of the card does not match to this unit or the card is not
compatible.
–
–
6
No return to start-up screen when - Reset this unit by turning it off, then on again.
disc is removed
The unit does not respond to the
remote control
- Aim the remote control directly at infrared sensor window on the front
of the unit.
- Reduce the distance to infrared sensor window.
- Replace the batteries in the remote control.
- Re-insert the batteries with their polarities (+/- signs) as indicated.
- Make the signal code of the remote control match to the signal code
of the unit.
–
6
6
6
38
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Others
Others
Language Code
Language
Esperanto
Estonian
Code
5161
5166
Language
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
Code
6469
5771
6460
5761
5767
Language
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Code
6367
6459
6461
6467
Language
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
Code
6655
6661
6665
6664
6657
6669
Language
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Code
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
F-H
Faroese
Fiji
Finnish [FIN]
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
L-N
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
Portuguese [POR]
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
U-Z
Arabic
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Slovak [SLO]
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Bulgarian [BUL]
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
5759
4947
7254
4961
5464
4965
5047
6058
5160
Swedish [SWE]
6149
6164
6159
6247
6265
5247
6258
6266
T
Irish [IRI]
Tagalog
Tajik
Tamil
Tatar
Telugu
6658
6653
6647
6666
6651
6654
4861
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Thai
Note
• If you choose a language that has a 3-letter-language code (written in bracket), the code will be
displayed every time you change the audio or subtitle language setting on page 22. If you
choose any other languages, ‘---’ will be displayed instead.
39
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Others
Others
Specifications
ANALOG AUDIO OUTPUT
Output level: 2Vrms
SIGNAL SYSTEM
NTSC color
2 channel (L, R) output connector: Pin jacks,
Multi channel (FL, FR, C, SL, SR, SBL, SBR, SW): Pin jacks, 1set
APPLICABLE DISCS
(1) BD/DVD-video Discs
AUDIO OUTPUT PROPERTIES
1-layer 12cm single-sided discs, 2-layer 12cm single-sided discs, 2-layer 12cm double-sided discs
(1 layer per side)
(1) Frequency response
1 BDs (linear PCM)
: 4Hz to 22kHz (48kHz sampling)
: 4Hz to 44kHz (96kHz sampling)
: 4Hz to 88kHz (192kHz sampling)
: 4Hz to 22kHz (48kHz sampling)
: 4Hz to 44kHz (96kHz sampling)
: 4Hz to 20kHz
1-layer 8cm single-sided discs, 2-layer 8cm single-sided discs, 2-layer 8cm double-sided discs
(1 layer per side)
(2) BD-RE / BD-R
2 DVDs (linear PCM)
3 CDs
1-layer 12cm single-sided discs, 2-layer 12cm single-sided discs
1-layer 8cm single-sided discs, 2-layer 8cm single-sided discs
(3) DVD-R
1-layer 12cm single-sided discs, 2-layer 12cm single-sided discs
1-layer 8cm single-sided discs, 2-layer 8cm single-sided discs
(4) DVD-RW
(2) S/N ratio
: 125dB
(3) Total harmonic distortion : 1kHz 0.0008%
(4) Dynamic range
: 110dB
1-layer 12cm single-sided discs
1-layer 8cm single-sided discs
(5) Compact discs (audio CD)
12cm discs, 8cm discs
(6) CD-RW/-R
DIGITAL AUDIO OUTPUT
Optical digital output: Optical connector, 1 set
Coaxial digital output: Pin jack, 1 set
POWER SUPPLY
AC 120V, 60Hz
12cm discs, 8cm discs
POWER CONSUMPTION
APPLICABLE MEMORY CARDS
68W (Standby: 0.8W)
(1) SD Memory Card
(2) SDHC Memory Card
(3) miniSD Card
MAXIMUM EXTERNAL DIMENSIONS
W :440mm (17-3/8")
H :140mm (5-9/16")
D :402mm (15-13/16")
(including protruding parts)
(4) microSD Card
S-VIDEO OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
C output level: 0.286Vp-p
Output connectors: S connector, 1 set
VIDEO OUTPUT
MASS
10.5 kg (23.1 lbs)
REMOTE CONTROL
RC001BD
Infrared pulse type
Supply: DC 3V, 2 R6P/AA batteries
External dimensions:
W :52mm (2-1/16")
Y output level: 1Vp-p (75Ω/ohms)
Output connectors: Pin jack, 1 set
440.0
COMPONENT OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
PB/CB output level: 0.648Vp-p (75Ω/ohms)
PR/CR output level: 0.648Vp-p (75Ω/ohms)
Output connectors: BNC jacks, 1 set/Pin jacks, 1 set
H
D
:227mm (8-15/16")
:30mm (1-3/16")
Mass: 171g (0.4 lbs) (included batteries)
HDMI OUTPUT
Output jack: 19-pin HDMI terminal, 1 set
HDMI ver. 1.3a (Deep Color, Dolby Digital Plus, Dolby TrueHD, DTS-HD)
• For purposes of improvement, specifications and design are subject to change without notice.
40
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
04/2008 541110080022M mzh-d
E5E30UD/1VMN25597 (((((
Download from Www.Somanuals.com. All Manuals Search And Download.
|