R
Model LC1500 User Guide
LCD TV/Monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Important safeguards for you and your new product
Your product has been manufactured and tested with your safety in mind. However, improper use
can result in potential electrical shock or fire hazards. To avoid defeating the safeguards that have
been built into your new product, please read and observe the following safety points when
installing and using your new product, and save them for future reference.
Observing the simple precautions discussed in this booklet can help you get many years of enjoy-
ment and safe operation that are built into your new product.
This product complies with all applicable U.S. Federal safety requirements, and those of the
Canadian Standards Association.
1. Read Instructions
9. Attachments
Do not use attachments not recommended by
the product manufacturer as they may cause
hazards.
All the safety and operating instructions should
be read before the product is operated.
2. Follow Instructions
10. Ventilation
All operating and use instructions should be fol-
lowed.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from overheating,
and these openings must not be blocked or cov-
ered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other
similar surface. This product should not be
placed in a built-in installation such as a book-
case or rack unless proper ventilation is provid-
ed or the manufacturer’s instructions have been
adhered to.
3. Retain Instructions
The safety and operating instructions should be
retained for future reference.
4. Heed Warnings
All warnings on the product and in the operating
instructions should be adhered to.
5. Cleaning
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
11. Power Sources
This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply to your home, consult your product deal-
er or local power company. For products intend-
ed to operate from battery power, or other
sources, refer to the operating instructions.
6. Water and Moisture
Do not use this product near water - for exam-
ple, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swim-
ming pool.
7. Accessories
Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult,
and serious damage to the product. Use only
with a cart, stand, tripod, bracket, or table rec-
ommended by the manufacturer, or sold with the
product. Any mounting of the product should fol-
low the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer.
12. Line-Cord Polarization
This product is equipped with a three-wire
grounding type alternating-current line plug (a
plug having one blade wider than the other).
This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, contact your
electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized
plug.
8. Transporting Product
13. Power-Cord Protection
A product and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product
and cart combination to overturn.
Power-supply cords should be routed so that
they are not likely to be walked on or pinched by
items placed upon or against them, paying par-
ticular attention to cords at plugs, convenience
receptacles, and the point where they exit from
the product.
(Continued on next page)
PORTABLE CART WARNING
206-3652
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
(Continued from previous page)
18. Object and Liquid Entry
14. Outdoor Antenna Grounding
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of
any kind on the product.
If an outside antenna or cable system is con-
nected to the product, be sure the antenna or
cable system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Article 810 of the National
Electrical Code (U.S.A.), ANSI/ NFPA 70 pro-
vides information with regard to proper ground-
ing of the mast and supporting structure,
grounding of the lead-in wire to an antenna dis-
charge unit, size of grounding conductors, loca-
tion of antenna-discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode.
19. Servicing
Do not attempt to service this product yourself
as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
20. Damage Requiring Service
Unplug this product from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
a. If the power-supply cord or plug is damaged.
Example of Grounding According to National
Electrical Code Instructions
b. If liquid has been spilled, or objects have fall-
en into the product.
Ground Clamp
c. If the product has been exposed to rain or
water.
Antenna Lead in Wire
d. If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation.
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Electric Service
Equipment
Ground Clamps
Power Service Grounding
Electrode System (NEC
Art 250, Part H)
e. If the product has been dropped or the cabi-
net has been damaged.
NEC - National Electrical Code
f. If the product exhibits a distinct change in
performance.
21. Replacement Parts
When replacement parts are required, be sure
the service technician has used replacement
parts specified by the manufacturer or have the
same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
15. Lightning
For added protection for this product (receiver)
during a lightning storm, or when it is left unat-
tended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent dam-
age to the product due to lightning and power-
line surges.
22. Safety Check
16. Power Lines
Upon completion of any service or repairs to this
product, ask the service technician to perform
safety checks to determine that the product is in
proper operating condition.
An outside antenna system should not be locat-
ed in the vicinity of overhead power lines or
other electric light or power circuits, or where it
can fall into such power lines or circuits. When
installing an outside antenna system, extreme
care should be taken to keep from touching
such power lines or circuits as contact with them
might be fatal.
23. Wall or Ceiling Mounting
The product should be mounted to a wall or ceil-
ing only as recommended by the manufacturer.
24. Heat
17. Overloading
The product should be situated away from heat
sources such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat.
Do not overload wall outlets and extension cords
as this can result in a risk of fire or electric
shock.
206-3652
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety warnings
Important safety instructions
Controls
2
3
6
1
2
Basic composition of LCD TV
10
Connecting antenna
13
14
16
17
Connecting external equipment
Connecting DVD player
Connecting DTV
CONTENTS
INDEX
Connecting PC as monitor
Function checking in PC mode
18
20
3
4
Using remote control
Turning on the set
21
23
24
25
26
30
32
Function checking in TV mode
Setting language
Closed caption function
Parental control function
Programming / Erasing channels
Setting current time
34
36
38
40
5
Setting Off-Timer function
Setting On-Timer function
Setting sleep time function
Before operating the
set, please read this
manual carefully.
Adjusting audio condition
Adjusting video condition
41
44
6
7
Product specifications
46
206-3652
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Front of the set
On indicator
Power button
Remote control sensor
* Remove vinyl coating for protection from staining before using.
Back of the set
206-3652
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front control panel
Volume buttons
Menu button
Power button
On indicator
TV/Video button
Enter button
Channel buttons
Remote control sensor
Connecting ports
DC 12V
ANT IN
+75 Ω
PC/DTV INPUT
H/P
S-VIDEO
COMPONENT INPUT(480i)
CB CR
VIDEO (MONO)
L
AUDIO
R
IN
Audio/Video
input
Power input
Headphone
jack
PC / D-TV input
Antenna input
S-Video input
Component input
206-3652
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Remote Control
POWER BUTTON
NUMBER BUTTONS
FLASHBK BUTTON
MENU BUTTON
CHANNEL (
) BUTTONS
5,∞
TV/PC BUTTON
G Press the FLASHBK button to view the last
programme you were watching.
206-3652
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TV/VIDEO button
on Remote Control
TV/VIDEO BUTTON
PAGE 15~19
* Each press of this button changes the mode
as below.
TV programs
VIDEO
/ Cable TV
PAGE 28
PAGE 43
CC BUTTON
S-VIDEO
DVD
MUTE BUTTON
ENTER BUTTON
* VIDEO, S-VIDEO, DVD : Select each mode
for watching the corresponding external
equipment.
VOLUME ( , ) BUTTONS
2 3
SLEEP BUTTON
PAGE 40
206-3652
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic composition of LCD TV
Accessories
Hole
Table style stand
AC Adaptor
Remote Control
RC1500LC
Batteries
Power cord
PC signal cable
User guide
Warranty Card
(For USA)
Warranty Card
(For CANADA)
206-3652
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV programs
* Please make sure to connect the power plug to the wall outlet socket after connecting the TV to the adaptor.
a. Install the LCD TV in the correct using the installation accessories. Refer to page 12, 13.
b. Connect the antenna cable to the antenna input port of the set.
c. Connect the adaptor to the power input port of the set.
d. Connect the power plug to the wall outlet socket after connecting the power cord to the adaptor.
a
b
d
c
Note : If TV/monitor is cold, there may be a small “flicker” when turned on.
This is normal, there is nothing wrong with TV/monitor.
206-3652
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic composition of LCD TV
Installations
* For safety, use with table style stand only.
a. Place the table stand in the position you wish to install the set.
b. Put the set in the table stand.
*
When you assemble the TV set with table style stand, please match the stick of TV set to the hole of the
table style stand so as not to allow movement of the joint.
206-3652
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting antenna
* To get better picture quality, adjust the direction of antenna.
Connecting to wall antenna socket
G In case of wall antenna socket in apartment houses, connect the antenna cable as shown below.
(Use the correct type of antenna cable to the type of wall antenna socket.)
Turn clock arise to
tighten.
75Ω round cable
DC 12V
bronze wire
PC/DTV INPUT
ANT IN
C
+75
Ω
300Ω flat cable
antenna
converter
antenna input port
wall connecting port
Apartments
* In case of 75Ω round cable, insert the bronze wire and then tighten the connecting nut.
And in case of 300Ω flat cable, connect the twisted wire to the antenna converter and
then connect the converter to the antenna input port.
* When using 75Ω round cable, do not bend bronze. It may cause poor picture quality.
Connecting to outdoor antenna
G This type of antenna is usually used at common private houses.
Turn clock arise to
tighten.
VHF antenna
75Ω round cable
UHF
bronze wire
DC 12V
PC/DTV INPUT
ANT IN
+75
C
Ω
antenna
300Ω flat cable
antenna
converter
Private house
antenna input port
* In poor signal area, you can get better
picture quality if you install the anten-
na like the figure as shown right.
* If an antenna is divided to two TV
sets, use “signal divider” for connect-
ing.
DC 12V
VHF
UHF
PC/DTV INPUT
ANT IN
C
+75
Ω
signal
amplifier
206-3652
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting external equipment
* TV screen is automatically converted to TV mode by pressing the channel (
buttons (0~9) when using VIDEO.
* Please connect to other AV equipment by using input ports of the set.
) buttons, flashbk or number
5,∞
Connecting VCR
How to connect
1
G Connect the audio/video output ports of VCR to the corresponding input ports of the set.
DC 12V
PC/DTV INPUT
H/P
S-VIDEO
ANT IN
+75
COMPONENT INPUT(480i)
CR
VIDEO (MONO)
L
AUDIO
R
Ω
CB
IN
Antenna cable
shapes
2
or
Antenna
Direct
converter
connection
S-VIDEO
ANT IN
OUT
IN
ANT OUT
< Back panel of VCR >
CH3
CH4
(R) AUDIO (L)
VIDEO
1
How to use
2
Watching TV programs
Turn the set on and select the channel you want.
Watching VCR
a. Press tv/video button of the remote control to select [VIDEO].
1
* Select the channel 3 or 4 if you use only connection
.
* Select VIDEO if you use connection 2.
b. Insert a video tape into the VCR and press the PLAY button.
206-3652
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Only watching external AV source
How to connect
1
G Connect the audio/video output ports of external A/V equipment to the corresponding input ports of
the set.
DC 12V
PC/DTV INPUT
H/P
S-VIDEO
ANT IN
+75
COMPONENT INPUT(480i)
CR
VIDEO (MONO)
L
AUDIO
R
Camcorder
Ω
C
B
IN
< TV connection panel >
VCR
Video Game set
< Back panel of
external equipment >
R
AUDIO
L
VIDEO
DVD
How to use
2
G Turn the set on and press TV/VIDEO button to select [VIDEO].
VIDEO
< On remote control >
G Try this after turning on the external AV equipment.
206-3652
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting DVD player
G Connect component video inputs to Y, CB, CR (480i) and audio inputs to right and left port of AV ports.
How to connect
1
DC 12V
PC/DTV INPUT
H/P
S-VIDEO
ANT IN
+75 Ω
COMPONENT INPUT(480i)
CR
VIDEO (MONO)
L
AUDIO
R
C
B
IN
< TV connection panel >
AUDIO
R
L
< Back panel of DVD >
How to use
2
G Turn the set on and press TV/VIDEO button to select [DVD].
DVD
< On remote control >
G Try this after turning on the DVD set.
206-3652
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting DTV
* Make sure to select PC mode before operating.
How to connect
1
DC 12V
PC/DTV INPUT
ANT IN
+75 Ω
H/P
S-VIDEO
COMPONENT INPUT(480i)
CR
VIDEO (MONO)
L
AUDIO
R
CB
IN
< TV connection panel >
or
AUDIO
L
R
R
AUDIO
L
H
V
R
G
B
< Back panel of DTV >
How to use
2
G Turn the set on and press TV/PC button to select [PC].
PC
< On remote control >
G Try this after turning on the DTV set.
206-3652
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting PC as monitor
* Make sure to select PC mode on before operating.
How to connect
1
G Make sure to set resolution of the PC to be available before connecting. Refer to page 19.
G Connect the set to the PC with PC signal cable.
G Connect the audio ports to the PC to get PC sound.
DC 12V
PC/DTV INPUT
H/P
S-VIDEO
ANT IN
+75
COMPONENT INPUT(480i)
CR
VIDEO (MONO)
L
AUDIO
R
Ω
C
B
IN
< TV connection panel >
< PC >
< Accessories >
206-3652
18
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use
2
G Turn the set on and press TV/PC button to select [PC].
PC
< On remote control >
G Try this after turning on the PC.
Displayable Monitor Specification
MODE
VGA
Resolution
Horizontal
Frequency(KHz)
Vertical
Frequency(Hz)
640x480
640x480
640x480
640x480
640x480
720x400
800x600
800x600
800x600
800x600
800x600
832x624
1024x768
1024x768
1024x768
1024x768
31.5KHz
35KHz
60Hz
67Hz
72Hz
75Hz
85Hz
70Hz
56Hz
60Hz
72Hz
75Hz
85Hz
75Hz
60Hz
70Hz
75Hz
85Hz
37.9KHz
37.5KHz
43.3KHz
31.5KHz
35.2KHz
37.9KHz
48.1KHz
46.9KHz
53.7KHz
49.7KHz
48.4KHz
56.5KHz
60.2KHz
68.7KHz
SVGA
(MAC)
XGA
Note : If TV/monitor is cold, there may be a small “flicker” when turned on.
This is normal, there is nothing wrong with TV/monitor.
206-3652
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Function checking in PC mode
* Make sure to select PC mode on before operating.
Press the MENU button. Each time you press the button you can see menus as below.
1
Contrast
Brightness
H-Poisition
V-Poisition
Clock
:
:
:
:
:
:
71
74
0
0
40
16
Phase
Auto
Reset
Use
And ENTER
5∞2 3
Press the channel ( ) buttons to select a function you want to use.
5,∞
2
206-3652
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using remote control
Inserting batteries
Pull the battery cover
upward in the arrow
direction to remove.
1
2
3
Insert the batteries
with correct polarity.
remote control
sensor
Replace the battery
compartment cover.
* Apply two 1.5V alkaline batteries of AAA type. Don’t mix the used batteries with new bat-
teries.
* Remove batteries when you don’t use the remote control for long time. Liquid leakage from
old battery may cause operation failure.
206-3652
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using remote control
Notes for using remote control
Don’t place the remote control
Signal from the remote con-
trol may be disturbed by sun
light or other strong light. In
this case, turn the set to other
direction.
Make sure these are no
objects between the
remote control and its sen-
sor.
near a heater or damp place.
Strong impact on remote con-
trol may cause operation fail-
ure.
206-3652
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning on the set
* First, connect antenna cable and power cord with the adaptor.
* Press the power button and you will get stable picture and sound in a few seconds.
Press the POWER button to turn the set on.
1
displayed only in
stereo signal
ST.
7
channel number
12:30 PM
displayed only if present
time display is set
Press the channel (
) or number buttons to select
5,∞
a channel you want after memorizing received broad-
casting signals in the local area.
2
G Direct selecting channels
Press number of the program as one or two digits with
number buttons.
ex: channel 7
7 or 07
G Refer to page 32 ~ 33 to memorize channels.
Adjust Volume level.
3
G Volume ( ) button increas-
3
es the level of sound.
G Volume ( ) button decreas-
2
Volume
3
es the level of sound.
206-3652
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Function checking in TV mode
Press the MENU button. Each time you press the button you can see menus shown
below.
1
Language
Captions
Caption/Text
Parental Ctl
English
Off
CC1
Auto Program
Manual Program
Fine
Use
And ENTER
Use
And ENTER
5∞2 3
5∞2 3
Contrast
Brightness
Color
Tint
Sharpness
APC
100
100
85
0
7
Clock
Off-Timer
On-Timer
TV 3 Vol 30 Run
Auto Off
--:--AM
--:--AM
--:--AM
Hold
: Hold
Clear
Use
And ENTER
5∞2 3
Use
And ENTER
5∞2 3
MTS
Strero
AVL
Off
DASP
Equalizer
User
Use
And ENTER
5∞2 3
Press the channel (
) buttons to select a function you want to use.
5,∞
2
206-3652
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting language
Language
Press the ENTER button.
Press the MENU button to select the
screen display as below.
1
2
3
Language
Captions
English
Off
Caption/Text
Parental Ctl
CC1
Use
And ENTER
5∞2 3
Press the channel (
select a language you want to adjust.
) buttons to
5,∞
Language
Captions
English
Off
Caption/Text
Parental Ctl
CC1
Use
And ENTER
5∞2 3
G Each press of volume ( , ) buttons
2 3
changes the screen display as below.
English
Español
Français
206-3652
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Closed caption function
Closed captioning is a process which converts the audio portion of a television program into written words which
then appear on the television screen in a form similar to subtitles. Closed captions allow viewers to read the dia-
logue and narration of television programs.
Using Closed Captions
Captions are the subtitles of the dialogue and narration of televi-
sion programs. For prerecorded programs, program dialogue can
be arranged into captions in advance. It’s possible to caption a live
program by using a process called real-time captioning, which
creates captions instantly. Real-time captioning is normally done
by professional reporters using a machine shorthand system and
computer for translation into English.
Captioning is an effective system for the hearing-impaired, and it
can also aid in teaching language skills.
FOLLOW ME
•
The picture at left shows a typical caption.
Caption Tips
•
•
Not all TV broadcasts include closed caption signals.
Sometimes TV stations broadcast four different caption signals on the same channel. By selecting FROM CC1
TO CC4, you can choose which signal you view. CC1 is usually the signal with the captions, while Another
mode might show demonstration or programming information.
•
Your TV might not receive caption signals normally in the following situations.
Poor reception conditions are encountered:
•
•
IGNITION:
Picture may flutter, drift, suffer from black spots or horizontal streaking. Usually caused by interference from
automobile ignition systems, neon lamps, electrical drills, and other electrical appliances.
GHOSTS:
Ghosts are caused when the TV signal splits and follows two paths. One is the direct path and the other is
reflected off tall buildings, hills or other objects. Changing the direction or position of the antenna may improve
reception.
•
SNOW:
If your receiver is located at the weak, fringe area of a TV signal, your picture may be marred by small dots.
It may be necessary to install a special antenna to improve the picture.
An old, bad, or illegally recorded tape is played.
Strong, random signals from a car or airplane interfere with the TV signal.
The signal from the antenna is weak.
The program wasn’t captioned when it was produced, transmitted, or taped.
206-3652
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the Caption
G Each time you press the volume ( , ) buttons,
2 3
Press the MENU button to select the
screen display as below.
the caption mode is displayed one by one as
shown below.
1
2
Language
Captions
Caption/Text
Parental Ctl
English
Off
CC1
CAPTION CC1
CAPTION CC2
Use
And ENTER
5∞2 3
CAPTION CC3
CAPTION CC4
Press the channel (
) buttons to
5,∞
select [
].
Caption/Text
CAPTION TEXT1
CAPTION TEXT2
CAPTION TEXT3
CAPTION TEXT4
Language
Captions
Caption/Text
Parental Ctl
English
Off
CC1
Use
And ENTER
5∞2 3
Press the volume ( ) button.
3
3
Language
Captions
English
Off
Caption/Text
Parental Ctl
CC1
Press the ENTER button.
4
Use
And ENTER
5∞2 3
G This TV is programmed to remember which
mode it was last set to, even if you switch the
POWER off.
206-3652
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Closed caption function
Operating the Caption
Press the CC button to select
[
].
Captions
1
2
Captions
Off
And ENTER
Use
2 3
Press the volume ( , ) buttons to select [On] and press the ENTER button.
2 3
G Each press of volume (
,
2 3
) buttons changes the screen display as below.
EZ Mute
Off
On
G Captions function setting is Completed.
206-3652
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Text Function
Text services give a wide variety of information on all kind of subjects (ex. captioned pro-
gram lists, weather forecasts, stock exchange topics, news for hearing-impaired---) through
the half TV screen.
But not all stations offer text services, even though they might offer captioning.
Repeat the steps 1-2 at page 27.
1
Press the volume ( , ) buttons to select [Text 1], [Text 2], [Text 3] or [Text 4].
2 3
2
Language
Captions
English
Off
Caption/Text
Parental Ctl
Text1
Use
And ENTER
5∞2 3
Press the ENTER button.
3
G In the event you receive a poor signal, an empty black box may appear and disappear, even when the text
mode is selected. This is normal function in such an event.
206-3652
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental control function
The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the
broadcast station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the
type of program and by the categories chosen to be blocked. It is also possible to block all program viewing
for a time period. To use the Parental Control Function, the following must be set :
1. Ratings and categories to be blocked.
2. Number of hours to lock the television viewing control
3. Set a password
4. Enable the lock
V-Chip rating and categories
Rating guidelines are provided by broadcast stations. Most television programs and television movies can
be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-
to-video movies use the Movie Rating System(MPAA) only.
For Movies previously shown in theaters:
Movie Ratings:
* Unblocked
* G and Above
(general audience)
* PG and Above
(parental guidance suggested)
* PG-13 and Above (13 years and up)
* R and Above (restricted)
* NC-17 and Above (18 years and up)
* X (adult)
If you set PG-13 and Above ; G and PG movies will be available, PG-13, R, NC-17 and X will be
blocked.
For Television programs including made-for-TV movies:
General TV Ratings:
* Unblocked
* TV-G and Above
* TV-PG and Above
* TV-14 and Above
* TV-MA
(general audience) (individual categories do not apply)
(parental guidance suggested)
(14 years and up)
(mature audience)
Children TV Ratings:
* Unblocked
* TV-Y and Above
* TV-Y7
(youth) (individual content categories do not apply)
(youth, 7 years and up)
Content Categories:
* Dialog - sexual dialogue
(applies to TV-PG and Above, TV-14 and Above)
* Language - adult language
* Sex scenes - sexual situations
* Violence
* F Violence - fantasy violence
* No Rating
(applies to TV-PG and Above, TV-14 and Above, TV-MA)
(applies to TV-PG and Above, TV-14 and Above, TV-MA)
(applies to TV-PG, TV-14 and TV-MA)
(applies only to TV-Y7)
(blocks all viewing)
206-3652
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Blocking
Press the channel (
) buttons to
5,∞
Press the MENU button to select the
select the types of blocking to be set.
screen display as below.
1
2
4
5
Press the volume ( , ) buttons to
2 3
select the types of ratings to block.
Language
Captions
English
Off
G [MPAA], [Age] and/or [Content block] may
Caption/Text
Parental Ctl
CC1
be set.
Press the MENU button to return from
[Age Block] or [Content Blk] setting
screens.
Use
And ENTER
5∞2 3
Press the channel (
) buttons to
5,∞
Press the channel (
select [Set Hours].
) buttons to
5,∞
select [
].
Parental Ctl
Press the volume ( , ) buttons to set
2 3
the number of hours for the block-
ing.(Up to 99)
Language
Captions
English
Off
Press the channel (
select [Set Password].
) buttons to
5,∞
Caption/Text
CC1
Parental Ctl
Enter a four digit password. Enter it
again when requested.
Use
And ENTER
5∞2 3
G A new password may be chosen each time
blocking is set up.
Press the volume ( ) button.
3
3
Press the channel (
select [Lock On/Off].
) buttons to
5,∞
Aux. Block
MPAA
Age Block
Content Blk
Set Hours
Set Password
Lock On/Off
Sources Unblocked
Unblocked
6
Press the volume ( , ) buttons to set
2 3
the lock [On].
00 Hours
Press the MENU button to save the
blocking setup and exit.
To Set
2 3
Must Set Hours
Use
And ENTER
5∞2 3
G If parental control is already set then enter
the password when requested.
206-3652
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming / Erasing channels
Auto programming channels
* This function can be operated only when the set can receive input sig-
nal from broadcasting stations and the antenna cable is connected.
* [Auto programming] function memorizes all the receiving channels of
terestrial TV signals or cable TV programs.
* If channels of general wireless TV and cable TV are duplicated,
press the number buttons (0 ~ 9) to change as
general wirelessTV
CableTV
Press the MENU button to select the screen display
as below.
1
2
Auto Program
Manual Program
Fine
Use
And ENTER
5∞2 3
Press the volume ( ) button.
3
Auto Program
TV 7
89%
Scanning channel number
is displayed.
Stop ENTER
* Press the channel (
) buttons to check the memo-
5,∞
rized channels after auto programming is finished.
* If you press the ENTER button in auto programming,
the function will stop and only channels programming
up to that time will remain.
* Auto programming function can memorize only the
channels which are being received at that time.
206-3652
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Memorizing / Erasing current channel
*You can select [Add] or [Del] for the current channel.
Press the MENU button to select the
Press the channel (
) buttons to
5,∞
screen display as below. Then press
select a channel you want and then
1
3
the channel (
) buttons to select
5,∞
press the volume ( , ) buttons to
2 3
[Manual Program].
select [Memory] or [ Erase ].
Manual Program
TV
7
Memory
Erase
Auto Program
Manual Program
Fine
Use
And ENTER
5∞2 3
Use
And ENTER
5∞2 3
G Each time you press the volume ( , ) but-
2 3
tons, you can select as below alternative-
ly.
Erase
Memory
Press the volume ( , ) buttons.
2 3
2
Press the ENTER button.
The current channel number is displayed.
4
G The current channel is to be added /
deleted.
Manual Program
TV
7
Memory
Use
And ENTER
5∞2 3
206-3652
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting current time
* If current time setting is erased by power failure or TV is unplugged, reset it.
To set current time as 10:30 AM
Press the MENU button to select the screen display
as below.
1
Clock
--:--AM
--:--AM
--:--AM
Off-Timer
On-Timer
Hold
TV 3 Vol 30 Run
Auto Off
: Hold
Use
And ENTER
5∞2 3
Press the channel (
) buttons to select [Clock ].
5,∞
2
Clock
Off-Timer
On-Timer
--:--AM
--:--AM
--:--AM
Hold
TV 3 Vol 30 Run
Auto Off : Hold
Use
And ENTER
5∞2 3
Press the volume ( ) button.
3
3
Clock
Off-Timer
On-Timer
00:00 AM
--:--AM
--:--AM
Hold
TV 3 Vol 30 Run
Auto Off
: Hold
Use
And ENTER
5∞2 3
206-3652
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the channel (
select current hour.
) buttons to
5,∞
To check current channel, time and
sound status (stereo or dual)
4
5
GIf you hold the button, the hour display is
3
changed in the sequence of AM 1 ➔ AM 2
➔ ....PM12 ➔ PM 1 .... ➔ AM 12, and
changed in the reverse sequence for but-
ton.
G Press the ENTER button.
∞
current channel
ST.SAP
7
G Select [AM 10].
current sound
status
Press the volume ( ) button.
3
10:30AM
current time
Clock
Off-Timer
On-Timer
10:00AM
--:--AM
--:--AM
Hold
G Press the ENTER button again to release.
TV 3 Vol 30 Run
Auto Off
: Hold
Use
And ENTER
5∞2 3
* Current time is not displayed if current
time is not set.
* Stereo or dual sound is displayed only
when receiving the correspondent input
signal.
* Above displays disappear after a few sec-
onds.
Press the channel (
) buttons to
5,∞
select current minute. And press the
6
ENTER button.
G If you hold the button, the minute display
3
is changed in the sequence of 00 ➔ 01 ➔ 02
...58 ➔ 59, and changed in the reverse
sequence for button.
3
G Select [30] and press the ENTER button to
complete the setting.
G Time is progressed from the point of press-
ing the ENTER button.
G Press the ENTER button again and the
screen display is disappears.
206-3652
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Off-Timer function
*Timer function can be operated only if current time has been already set.
*Off-timer function is prior to on-timer function if they are set to the same time.
Turning off at 11:30 PM by off-timer function
Press the MENU button to select the screen display
as below.
1
Clock
10:30AM
--:--AM
--:--AM
Off-Timer
On-Timer
Hold
TV 3 Vol 30 Run
Auto Off
: Hold
Use
And ENTER
5∞2 3
Press the channel (
Timer].
) buttons to select [Off-
5,∞
2
Clock
10:30AM
--:--AM
Off-Timer
Hold
--:--AM
On-Timer
TV 3 Vol 30 Run
Auto Off
: Hold
Use
And ENTER
5∞2 3
Press the volume ( ) button.
3
3
Clock
10:30AM
--:--AM
Off-Timer
Hold
--:--AM
On-Timer
TV 3 Vol 30 Run
Auto Off
: Hold
Use
And ENTER
2 3 5∞
206-3652
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the channel (
) buttons to
Press the volume ( ) button to select
5,∞
3
select hour you want to set.
[Hold] or [Run].
4
7
8
G If you hold the button, the hour display is
5
changed in the sequence of AM 1 ➔ AM 2
➔ ....PM12 ➔ PM 1 .... ➔ AM 12, and
changed in the reverse sequence for but-
ton.
∞
G Select [PM 11].
Press the channel (
select [Run].
) buttons to
5,∞
Clock
Off-Timer
On-Timer
10:30AM
11:00PM
--:--AM
Hold
Press the volume ( ) button.
3
TV 3 Vol 30 Run
5
6
Auto Off
: Hold
Clock
10:30AM
11:00PM
Use
And ENTER
5∞2 3
Off-Timer
Hold
--:--AM
On-Timer
TV 3 Vol 30 Run
Auto Off
: Hold
Press the ENTER button.
Use
And ENTER
2 35∞
G Each press of channel (
changes the screen display as below.
) button
5,∞
9
Press the channel (
select minute you want to set.
) buttons to
5,∞
Run
Hold
G The screen display will disappear if you
press the ENTER button once more.
G The screen display of [ Sleep ] appears
on the screen for one minute untill TV
automatically turns off.
G If you hold the button, the minute display
is changed in the sequence of 00 ➔ 01 ➔
02 ...58 ➔ 59, and changed in the reverse
sequence for button.
5
∞
G Select [30].
* When [Auto Off] is set to [RUN] with
5∞2 3
Clock
Off-Timer
On-Timer
TV 3 Vol 30 Run
Auto Off
10:30AM
--:--AM
Hold
--:--AM
and ENTER buttons, the TV is switched to
standby mode automatically in 10 minutes if
there is no inptsignal.
: Run
206-3652
Use
And ENTER
5∞2 3
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting On-Timer function
*Timer function can be operated only if current time has been already set.
Turning on at 7:10 AM with volume 40 on channel 8 by on-timer function
Press the MENU button to select the
screen display as below.
Press the channel (
select hour you want.
) buttons to
5,∞
1
2
4
5
6
G If you hold the button, the hour display is
changed in the sequence of AM 1 ➔ AM 2
➔ ....PM12 ➔ PM 1 .... ➔ AM 12, and
5
Clock
Off-Timer
On-Timer
TV 3 Vol 30 Run
Auto Off
10:30AM
--:--AM
--:--AM
Hold
changed in the reverse sequence for but-
∞
ton.
: Hold
G Select [AM 7].
Use
And ENTER
5∞2 3
Press the channel (
select [On-Timer].
) buttons to
5,∞
Press the volume ( ) button.
3
Clock
Off-Timer
On-Timer
TV 3 Vol 30 Run
Auto Off
10:30AM
--:--AM
Clock
Off-Timer
On-Timer
10:30AM
--:--AM
7:--AM
Hold
Hold
--:--AM
TV 3 Vol 30 Run
: Hold
Auto Off
: Hold
Use
And ENTER
2 35∞
Use
And ENTER
5∞2 3
Press the volume ( ) button.
3
Press the channel (
) buttons to
5,∞
select minute you want.
3
G If you hold the button, the minute display
5
Clock
Off-Timer
On-Timer
10:30AM
--:--AM
is changed in the sequence of 00 ➔ 01 ➔
02 ...58 ➔ 59, and changed in the reverse
Hold
--:--AM
TV 3 Vol 30 Run
sequence for button.
G Select [10].
∞
Auto Off
: Hold
Use
And ENTER
2 35∞
206-3652
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the volume ( ) button.
3
Press the volume ( ) button.
3
7
11
Clock
Off-Timer
On-Timer
TV 3 Vol 30 Run
Auto Off
10:30AM
--:--AM
7:10AM
Clock
Off-Timer
On-Timer
TV 8 Vol 40 Run
Auto Off
10:30AM
--:--AM
Hold
Hold
7:10AM
: Hold
: Hold
Use
And ENTER
5∞2 3
Use
And ENTER
5∞2 3
Press the channel (
) buttons to
5,∞
Press the channel (
) buttons to
5,∞
select [Run] and press the ENTER
select the channel you want .
12
8
9
button.
G Each press of volume (
, ) buttons
2 3
changes the screen display as below.
Run
Hold
Press the volume ( ) button.
3
G On-Timer function setting is complet-
ed.
G If you press the ENTER button once
more, the screen display disappear
and the set will be turned automatical-
ly on with volume level 40 on channel
8 at 7:10 AM.
Clock
Off-Timer
On-Timer
10:30AM
--:--AM
7:10AM
Hold
TV 8 Vol 30 Run
Auto Off
: Hold
Use
And ENTER
5∞2 3
Press the channel (
) buttons to
5,∞
select the volume you want .
10
* If on-timer function is active, the current channel will change to the set channel when on-timer
is activated.
* Unless any button is pressed within two hours after turning on the TV by on-timer function, the
set is automatically turned off.
206-3652
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting sleep time function
* This function will automatically turn the set off after a set time.
Press the SLEEP button to set sleep time function.
1
G Each press of the button changes setting time status as
below.
Sleep ---
Use
And ENTER
2 3
10
20
30
60
- - -
240
180
120
90
G To release sleep time setting, press the SLEEP button
repeatedly to select [ --- ].
G The screen display of [ Sleep ] appears on the screen for
one minute untill automatically turning off.
* When a sleep time you want is displayed on the
screen, don’t press the SLEEP button.The screen
display disappears and sleep time is to be set.
* To check remaining sleep time after setting, press
the SLEEP button just once.
* To change sleep time setting, press the SLEEP
button repeatedly to select time setting you want.
* If you turn the set off after setting sleep time, the
setting will be erased. Set it again.
206-3652
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting audio condition
Adjusting audio condition by user
Press the MENU button to select the
screen display as below.
Press the volume ( , ) buttons to
2 3
adjust the audio condition as you want.
1
3
4
MTS
AVL
DASP
Equalizer
Strero
Off
User
MTS
Strero
AVL
Off
DASP
Equalizer
User
Use
And ENTER
Use
And ENTER
2 35∞
2 35∞
Press the channel (
select a audio item you want to adjust.
) buttons to
5,∞
Press the ENTER button.
2
MTS :
G Refer to page 42 for the details.
AVL (Auto Volume Level) :
G This function keeps the volume at the same
level even when the channels are changed.
DASP (Digital Audio Signal Process) :
G This function makes it possible for the user
to adjust the audio characteristics in each
mode (Cinema, Music or Sports) just as he
or she desires.
Equalizaer :
G This function enables the user to make
adjustments to the frequency bands listed
below just as he or she desires.
100Hz, 500Hz, 1.5kHz, 5kHz, 10kHz.
206-3652
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting audio condition
Selecting bilingual signals
Screen display in stereo signal
: Stereo
Screen display in bilingual signal : SAP
* Bilingual (dual language) signal
G This signal contains the secondary language signal in addition to the primary language.
G There are the primary and secondary language and stereo modes in bilingual signal.
G [Mono] : The primary language is output from left and right speaker. Signal mode is mono.
G [Stereo] : The primary language is output from left and right speaker. Signal mode is stereo.
G [SAP] : The secondary language is output from left and right speaker.
Press the MENU button to select the
Press the volume ( , ) buttons to
2 3
screen display as below.
select an audio mode you want.
1
3
MTS
AVL
Strero
Off
MTS
Strero
AVL
Off
DASP
Equalizer
User
DASP
Equalizer
User
Use
And ENTER
5∞2 3
Use
And ENTER
5∞2 3
G Each press of volume ( , ) buttons
2 3
changes the screen display as below.
Mono
Stereo
SAP
Press the channel (
select [MTS].
) buttons to
5,∞
2
Press the ENTER button.
4
* If some strange sound is heard when watching TV programs on stereo mode in poor signal
areas, or if in non-dual signal service area, make sure to select mono mode.
* [Stereo] or [Mono] mode can be available only when broadcasting signal contains the data.
206-3652
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Mute
* This function cuts off speaker sound. It’s convenient when getting phone
calls.
Press the MUTE button.
1
Mute
G To release muted sound, press the MUTE button or volume ( ,
2
) buttons.
3
G If muted sound is released, volume level is displayed on the
screen.
Using headphone
G Headphone is an optional item.
G You can adjust headphone sound with volume( , ) buttons. While you
2 3
are listening to sound through headphone, speaker sound is cut off.
INPUT
H/P
S-VIDEO
COMPONENT INPUT(480i)
CB CR
VIDEO (MONO)
L
A
IN
206-3652
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting video condition
APC (Auto Picture Control)
Press the MENU button to select the screen display
as below.
1
2
Contrast
Brightness
Color
Tint
Sharpness
APC
100
100
70
0
4
Clear
Use
And ENTER
5∞2 3
Press the channel (
) buttons to select [APC].
5,∞
Contrast
Brightness
Color
100
100
70
Tint
0
Sharpness
APC
4
Clear
Use
And ENTER
5∞2 3
G Each press of volume ( , ) buttons changes the screen
2 3
display as below.
Clear
User
Optimum
Soft
Press the ENTER button.
3
206-3652
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual picture control
Press the MENU button to select the
Press the volume ( , ) buttons to
adjust the picture condition as you
want.
2 3
screen display as below.
1
3
4
Contrast
Brightness
Color
100
100
70
0
Contrast
Brightness
Color
100
100
70
0
Tint
Tint
Sharpness
4
Sharpness
4
Use
And ENTER
Use
And ENTER
5∞2 3
5∞2 3
G [Contrast], [Brightness], [Color] are adjust-
ed from 0 to 100.
G [Tint] is adjusted from Red 50 to Green 50.
G [Sharpness] is adjusted from 0 to 10.
Press the channel (
) buttons to
5,∞
Press the ENTER button.
select a picture item you want to adjust.
2
Contrast :
G Adjust the different between the light and
dark levels of the picture..
Brightness :
* APC setting is to be released if
you use this function.
G Adjust the white or light of the overall
picture..
Sharpness:
G Adjust the levels of crispness in the
edges between the light and dark area of
the picture. The lower the level, the softer
the image.
Color:
G Adjust the richness of all colors.
Fine:
Auto Program
Manual Program
Fine
G This function is to adjust the picture to sta-
ble condition when it is poor, for example, a
horizontal stripe, twisted picture or no color
in brodcasting.
206-3652
45
Use
And ENTER
5∞2 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Product specifications
Model
:
:
LC1500
Main body
Horizontal size (mm)
Height (mm)
: 394
: 384
: 105.5
: 5.2
Thickness (mm)
Weight (kg)
Including table stand
:
:
Horizontal size (mm)
Height (mm)
: 394
: 413
: 194
: 7.9
Thickness (mm)
Weight (kg)
Power requirements
DC 12V/3A
* CAUTION : For use only with Model No. CAM-1230 AC Adaptor, manufactured
by Chang-Nam Electronics.
Television system
:
NTSC
Television channels
:
:
VHF : 2 ~ 13, UHF : 14 ~ 69
Cable : 01 ~ 125
Tube
:
:
LCD Panel
Power consumption
See the back of the set
75 Ω
External antenna impedance :
Audio output
:
:
:
1.0W + 1.0W
8 Ω X 2
Speaker outputs
External input ports
VIDEO input port set 1
S-VIDEO input 1
Headphone jack 1
PC/D-TV input 1
Component video input set 1
Power input 1
Antenna input 1
Adaptor (DC power)
:
In
: AC 100-240V ~ 1.3A-0.7A
50/60Hz, 85VA
Out
: DC 12V, 3A
* CAUTION : For use only with Model No. CAM-1230 AC Adaptor, manufactured
by Chang-Nam Electronics.
Power supply cordset
:
Standard North America three wire earth-grounding
with flexible cord SJT type or higher type.
* CAUTION : If replacement becomes necessary, replace it with an exact duplicate.
Contact any MARANTZ authorized service center.
206-3652
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
206-3652
Download from Www.Somanuals.com. All Manuals Search And Download.
COUNTRY
ALGERIE
ARMENIA
AUSTRALIA
AUSTRIA
BAHREIN
BANGLADESH
BELGIUM
BULGARIA
CANADA
COMPANY
Azur 2000
NGYIG Ltd.
Jamo Australia Pty. Ltd.,
Huber & Prohaska GmbH
Ambassador Stores
Target
Van der Heyden Audio N.V.
Ariescommerce GmbH
Lenbrook Industries Limited
ADDRESS
8, Lotissement Ben Hatadi, Alger, Algerie
47 A/75 St. Lalaiants, 375000 Yerevan, Armenia
24 Lionel Road, Mt. Waverley, VIC 3149, Australia
Taborstraße 95 / Ladestraße 1, Gebäude Hangartner, A-1200 Wien, Austria
P.O. Box 237,141, Government Avenue, Manama,Bahrein
1078, Ramjoy Mohanja Lane Asadgonj, Chittagong 4000, Bangladesh
Brusselbaan 278, 9320 Erembodegem, Belgium
Makedonia Blvd. 16, 1606 Sofia, Bulgaria
633 Granite Court, Pickering, Ontario
CHINA
Guang Chang Audio International Co., Ltd. No.38 Yushan Road, ShiQiao, Pan Yu, Guang Dong, China
CYPRUS
Empire Hifi systems Ltd.
Audio International
Audio Nord
P.O. Box 5604, Nicosia, Cyprus
Sokolska 41, 67902 Rajecko, OKR,Blansko, Czech Republic
Dali Allé 1, 9610 Noerager, Denmark
CZECH REPUBLIC
DENMARK
DUBAI
V.V.& SONS
P.O. Box 105, Dubai, U.A.E.
EGYPT
Solimco
9, El Attibaa St. Doki, Cairo, Egypt
ESTONIA
F.Y.R.O.M.
FINLAND
FRANCE
GERMANY
GREECE
HiFi Club Estonia
T.P. KODI
Audio Nord
Marantz France
Marantz Deutschland
Adamco S.A.
Ehte 4, 90503 Haapsalu, Estonia
ul.Cedomir Kantargiev 21a, Skopje, Former Yugoslavian Republic of Macedonija
Uudenmaankatu 4-6, Helsinki SF-00120, Finland
A division of Marantz Europe B.V., P.O. Box 301, 92 156 Suresnes Cedex, France
Hakenbusch 3, 49078 Osnabrück, Germany
188, Hippocratous Street, 11471 Athens, Greece
Building SFF-2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands
Unit 1706, Metroplaza II, 223 Hing Fong Road, Kwai Fong, N.T., Kowloon, Hong Kong
Terez Krt.31, 1067 Budapest, Hungary
HEADQUARTERS EUROPE: Marantz Europe B.V.
HONG KONG
HUNGARY
ICELAND
INDIA
IRAN
IRELAND
ISRAEL
ITALY
IVORY COAST
JAPAN
KOREA
KUWAIT
LATVIA
Marantz Asia Ltd.
Infovox Ltd.
ID Electronics Ltd.
NOVA Audio Private
Home Co.
Marantz Ireland
Elmor Ltd.
Marantz Italy
Armula 38, 108 Reykjavik, Iceland
8,Punam Co-op.Society 29/30 Road#5, Union Park MUMBAI 400052, India
5th floor no 878 Philips Building Enghelab ave, P.O. 11365/7844 Tehran, Iran
Clonskeagh, Dublin 14, Ireland
52 Heh Beiyar Street, Kikar Hamedina, Tel Aviv, Israel
Via Casati 23, 20052 Monza (Milano), Italy, Servizio Consumatori 1678-20026, Numero Verde
B.P. 2428, Abidjan 01, Ivory Coast
35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan
121-210, 2F Shinhan Bldg., 247-17 Seokyo-dong, Mapo-ku, Seoul, Korea
P.O. Box 8196, Salmiah 22052, Kuwait
Hifivoir
Marantz Japan Inc.
Mk Enterprises Ltd.
alAlamiah Electronics Intl.
Ace Ltd.
61, LacPlesa Str., Riga LV 1011, Latvia
LEBANON
LITHUANIA
MALAYSIA
MALTA
AZ Electronics S.A., 1,
Accapella Ltd.
P.O. Box 11 2833, Beirut, Lebanon
Ausros, Vartu G/5, Pasazo SKG., 2001 Vilnius, Lithuania
Wo Kee Hong Electronics Sdn. Bhd. Suite 8.1, Level 8, Menara Genesis, No. 33, Jalan Sultan Ismail, 50250 Kuala Lumpur, Malaysia
Doneo Co Ltd.
78 The Strand, Sliema SLM07, Malta
MAURITIUS
SKR Electronics Ltd.
P.O. Box 685, Bell Village, Port Louis, Mauritius
MILITARY MARKET EUROPE PASCO GmbH
PO BOX 1280, Sandhausen 69200, Germany
NETHERLANDS
NEW ZEALAND
NORWAY
Marantz Domestic Sales
Wildash Audio Systems
Audio Nord
A division of Marantz Europe B.V., Building SFF2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands
14 Malvern Road, Mt. Albert, Auckland, New Zealand
Sandkerveien 64, Oslo 0483, Norway
OMAN
POLAND
PORTUGAL
PROFESSIONAL EUROPE
PROFESSIONAL U.S.A.
QATAR
REUNION
ROMANIA
RUSSIA
Mustafa & Jawad Trading CO.
Philips Polska Sp. z.o.o.
Corel2
Marantz Professional Products
Marantz Professional Products
Almana & Partners W.W.L.
Vision +
P.O. Box 1918, Ruwi, Oman
Al.Jerozolimskie 195b, 02 222 Warszawa, Poland
Comércio de Electrónica Lda., Av. Luís Bívar, No 85 A, 1050 Lisboa, Portugal
Kingsbridge House, Padbury Oaks, 575-583 Bath Road, Longford, Middlesex UB7 0EH, U.K.
Distributed by: Superscope Technologies Inc., 1000 Corporate Blvd. Ste.D, Aurora, IL
P.O. Box 49, Doha, Qatar
180 Rue du Marechal Leclerc, 97400 Saint Denis, Ile de la Reunion
5, Zagazului Str. Bl.1G,apt.18, sector 1,Bucharest, Romania
7/2, Montazhnaya Street, 107497 Moscow, Russia
Nova Music Entertainment
Absolute Audio
SAUDI ARABIA
SINGAPORE
SLOVAKIA
SLOVENIA
SOUTH AFRICA
SPAIN
Adawlia Univ. Electr. Apl
Wo Kee Hong Distribution PTE Ltd.
Bis Audio s.r.o.
P.O. Box 2154, Alkhobar 31952, Saudi Arabia
130 Joo Seng Road, #03-02 Olivine Building, Singapore 368357
Nam. SNP 10, 96001 Zvolem, Slovakia
Smartinska 152, HALA V/3, 61000 Ljubljana, Slovenia
P.O. Box 1614, Alberton, 1450, South Africa
Martinez Villergas 2, Apartado 2065, Madrid 28027, Spain
Mezzanine Floor, The Landmark 385, Galle Road, Colombo - 3, Sri Lanka
Almedalsvagen 4, Gotenborg 402-23, Sweden
Bofex
Coherent Imports (PTY) Ltd.
Marantz Spain
The listening Room
Audio Nord
SRI LANKA
SWEDEN
SWITZERLAND
SYRIA
TAHITI
TAIWAN
THAILAND
TUNESIA
TURKEY
U.K.
U.S.A.
YUGOSLAVIA
Sound Company AG
Hamzeh & Partners
Covecolor
Pai-Yuing Co. Ltd.
MRZ Standard Co. Ltd.
Societe EDEVIG
Türk Philips Ticaret A.S.
Marantz Hifi UK Ltd.
Marantz America Inc.
ITM Company
Postfach, 8010 Zürich, Switzerland
Hafez Ibrahim Str. No 117, Damascus Shalan, Syria
Av. Prince Hinoi, Cours de l'union sacré, P.O. Box 2334, Papeete, Tahiti
6th No 148 Sung Kiang Road, Taipei 10429, Taiwan R.O.C.
746-750 Mahachai Road, Wangburapa, Bangkok 10200, Thailand
40, Avenue du Golfe Arabe, El Menzah, 1004, Tunesia
Yukari Dudullu Organize sanayi Bolgesi, 2.Cadde no.28, 81260 Umraniye-Istanbul, Turkey
Kingsbridge House, Padbury Oaks, 575-583 Bath Road, Longford, Middlesex UB7 0EH, U.K.
1100 Maplewood Drive Itasca, IL 60143, U.S.A.
Omladinskih Brigada 86, 11070 Belgrade, Yugoslavia
EXPORT
Marantz Domestic Sales
A division of Marantz Europe BV,Building SFF2, P.O. Box 80002, 5600 JB Eindhoven, TheThe Netherlands
R
is a registered trademark.
Printed in Korea
07/2001
MITi
347W851210
Download from Www.Somanuals.com. All Manuals Search And Download.
|