Marantz CD Player SA 15S1 User Manual

Model SA-15S1 User Guide  
Super Audio CD Player  
CLASS 1 LASER PRODUCT  
LUOKAN LASERLAITE  
KLASS 1 LASERAPPARAT  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY  
INSTRUCTIONS  
READ BEFORE OPERATING EQUIPMENT  
This product was designed and manufactured to meet strict quality and safety standards. There  
are, however, some installation and operation precautions which you should be particularly aware  
of.  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the manufacture's  
instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has  
two blades with one wider than the other. A grounding type plug has two blades and a third  
grounding prong. The wide blade or the third prong are provided for your safety. If the provided  
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold  
with the apparatus. When a cart is used, use caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has  
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been  
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or  
moisture, does not operate normally, or has been dropped.  
Additional Safety Information!  
This product should not be placed in a built-in installation such as a bookcase or rack unless  
proper ventilation is provided or the manufacturers instructions have been adhered to.  
Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,  
such as vases, shall not be placed on the apparatus.  
When the switch is in the OFF position, the apparatus isnt completely switched-off from the  
MAINS.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE:  
aged to try to correct the interference by one or more of  
the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV tech-  
nician for help.  
This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interfer-  
ence in a residential installation. This equipment gen-  
erates, uses and can radiate radio frequency energy  
and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that  
interference will not occur in a particular installation. If  
this equipment does cause harmful interference to  
radio or television reception, which can be determined  
by turning the equipment off and on, the user is encour-  
NOTE:Changes or modifications may cause this unit  
to fail to comply with Part 15 of the FCC Rules and may  
void the user's authority to operate the equipment.  
This Class B digital apparatus complies  
with Canadian ICES-003.  
Cet appareil numérique de la Classe B est  
conforme á la norme NMB-003 du Canada.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
INTRODUCTION ................................................................................................................................... 2  
PRODUCT FEATURES.......................................................................................................................................2  
ABOUT SUPER AUDIO ......................................................................................................................................2  
PLAYING CD-RW DISCS....................................................................................................................................2  
APPLICABLE DISCS TO THE UNIT ...................................................................................................................2  
BEFORE USING .................................................................................................................................... 3  
NOTES ABOUT THE DISCS ..............................................................................................................................3  
INAPPROPRIATE PLACES FOR INSTALLATION ..............................................................................................3  
PRECAUTIONS ..................................................................................................................................................4  
USING REMOTE CONTROL UNIT.....................................................................................................................4  
LOADING BATTERIES .......................................................................................................................................4  
NAMES AND FUNCTIONS.................................................................................................................... 5  
FRONT PANEL ...................................................................................................................................................5  
REMOTE CONTROLLER ...................................................................................................................................6  
REAR PANEL .....................................................................................................................................................8  
DISPLAY .............................................................................................................................................................9  
CONNECTIONS .................................................................................................................................. 10  
OPERATION ........................................................................................................................................ 11  
CONNECTING THE POWER SUPPLY.............................................................................................................11  
NORMAL PLAYBACK .......................................................................................................................................11  
START SOUND MODE .....................................................................................................................................13  
PLAYING YOUR FAVORITE TRACKS OF A DISC ...........................................................................................14  
PLAYING YOUR FAVORITE PARTS OF A DISC (SEARCH) ............................................................................14  
REPEATED DISC PLAY(REPEAT PLAY) .........................................................................................................14  
PLAYING TRACKS IN A RANDOM SEQUENCE (RANDOM PLAY) ................................................................15  
PLAYING TRACKS IN A SPECIFIC SEQUENCE (PROGRAM PLAY) .............................................................15  
SEARCHING YOUR FAVORITE TRACKS (AMS (AUTOMATIC MUSIC SCAN) PLAY)....................................16  
QUICK REPLAY ................................................................................................................................................17  
ABOUT THE TEXT INFORMATION DISPLAY ..................................................................................................17  
TURNING OFF THE DISPLAY AND ILLUMINATION (DISPLAY OPERATION) ...............................................18  
TIMER PLAY .....................................................................................................................................................18  
TROUBLE SHOOTING ........................................................................................................................ 19  
SPECIFICATIONS  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Thank you for selecting the Marantz SA-15S1 Super Audio  
CD Player for your Audio system.  
APPLICABLE DISCSTO THE UNIT  
This Player incorporates a number of features designed to  
enhance the listening of your favorite audio sources.  
Please read these operating instructions carefully. We  
recommend that you read the entire user guide before you  
attempt to connect or operate the player.  
1. Super Audio CD  
After you have reviewed the contents of this manual,we suggest  
that you make all system connections before you attempt to  
operate the unit.  
There are three types of Super Audio CDs.  
Single-layer Disc  
Dual-layer Disc  
Hybrid-layer Disc  
PRODUCT FEATURES  
This unit can playback the outstanding sound performance in  
Disc Types  
Hybrid-layer Disc  
Dual-layer Disc  
Super Audio CD. This unit has the following unique features.  
Single-layer Disc  
Low-noise low-distortion filter circuit and high-speed  
current-feedback-type output amplifier with the differential  
input type HDAM.  
HD layer  
HD layer  
CD layer  
HD layer  
Text information display function that can display disc titles,  
track titles etc. in Super Audio CD.  
CD-R/CD-RW discs can be played.  
And each type may contain two areas of recorded information.  
High quality stereo area  
High quality multi-channel area**  
Single Layer Disc  
It can contain both high quality stereo area and high quality  
multi-channel area** information.  
ABOUT SUPER AUDIO  
The Super Audio standard is based on Direct Stream Digital  
(DSD) technology. This new direct-stream digital format  
comprises a 1-bit system that has a digital sampling frequency  
that is 64 times higher than that of conventional audio CD.The  
results are spectacular: a frequency response of over 100k  
Hz and a 120 dB dynamic range over the entire audible  
spectrum. Mixed with as many of the original frequencies as  
possible, the audio information audible for human ears sounds  
much more natural.  
Dual Layer Disc  
It can contain both high quality stereo area and high quality  
multi-channel area** information. And a double amount of  
information can be stored on the disc thanks to the second  
layer.  
Hybrid Layer Disc  
Not only does this disc contain both high sound quality  
stereo area and high sound quality multi-channel area**  
information, it also has a CD layer in the second layer, so it  
can be played on a CD player.  
All audible frequencies are, after all, embedded in the frequency  
range as emitted by the sound source. A better reproduction  
does not exist! For the first time your ears will relive reality.  
Hybrid Super Audio CD Disc  
PLAYING CD-RW DISCS  
This unit can play back the CD-RW (ReWritable) discs as well  
1
CD layer that plays on any of your  
existing CD players  
as ordinary Audio CD and CD-R (Recordable) discs.  
High-Density layer containing:  
- High sound quality stereo  
The CD-R and CD-RW discs should contain properly-recorded  
TOC information so that they can be played back. In CD  
recorders, the task of writing TOC information is referred to as  
finalizing the disc. Discs that are not finalized cannot be properly  
recognized as an Audio CD and played back by regular CD  
players and Super Audio CD players. For details, please read  
the instruction manual provided with a CD recorder.  
* TOC stands for Table Of Contents and contains  
information such as the total number of tracks and total  
playing time of the disc.  
2
3
-
High sound quality multi-channel**  
The number of tracks recorded may vary per layer. It will be  
shown on the display window of the unit.  
** This unit is a stereo-only player, and so it cannot play  
high-quality multi-channel audio areas. (It does not  
recognize multi-channel areas.)  
This unit can play only the discs recorded in the CD-DA  
format designed for music reproduction. Do not attempt to  
play a disc containing other data, such as a CD-ROM for  
PCs, on this unit.  
2. Audio CD (CDDA)  
As the playback of a CD-RW disc necessitates partial  
change of the player setup, it may take longer time for  
reading the TOC information than when an Audio CD or  
CD-R disc is played.  
Audio CDs contain music tracks only.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE USING  
NOTES ABOUT THE DISCS  
INAPPROPRIATE PLACES FOR  
INSTALLATION  
* Handle the discs carefully so as not to scratch their  
surfaces.  
* Keep the surfaces of the discs clean at all times.  
When cleaning the surfaces of discs, always be sure to use  
the special cleaner and wipe the surfaces in the directions  
shown in the figure below.  
To keep your player in perfect working order for the longest  
possible time, avoid installing the player in the following  
locations.  
Wherever it will be exposed to direct sunlight  
Wherever it will be close to a heater or other heat-radiating  
appliance  
Wherever the humidity is high or ventilation is poor  
Wherever it is very dusty  
Wherever it will be subject to vibration  
On top of a rickety stand or in an unstable location which is  
tilted at an angle  
In an audio rack with little space at the top and bottom or  
other location where the heat dissipation will be obstructed  
To ensure proper heat dissipation, install the player while  
leaving clearances between the player and wall or other  
components, as shown in the figure below.  
On top of an amplifier or other component which dissipates  
a great deal of heat  
Wipe the surface radially Do not wipe the surface in  
from the center.  
the circumferential direction.  
* Do not attach pieces of paper or stickers to the label  
surfaces of the discs.  
When a disc has a piece of plastic tape or rental CD label  
with paste protruding from the edge or when a disc still bears  
traces of sticky tape or adhesive labels, do not attempt to  
play it. If such a disc is played on the CD player, you may  
find that you cannot remove it or that some other kind of  
malfunctioning may occur.  
* The quality of the laser and other components can be  
harmed if the player is placed directly on top of an  
amplifier or other device which generates heat.  
0.1 m or more  
0.1 m or more  
0.1 m or more  
0.1 m or more  
SUPER AUDIO CD PLAYER SA-15S1  
OPEN/  
CLOSE  
PLAY  
DISPLAY OFF  
STOP  
SOUND  
MODE  
POWER ON/OFF  
PHONES  
LEVEL  
PAUSE  
-
+
* Do not use discs which come in special shapes.  
Do not attempt to play heart-shaped or octagonal discs or  
discs with any other special shapes. You may find that you  
cannot remove them or that some other kind of malfunctioning  
may occur in the player.  
7
Do not place objects on top  
Refrain from placing any objects on top of the player.  
7 Cautions on handling power cord  
* Use discs which satisfy the CD standards such as those  
Do not touch the power cord with wet hands.  
When disconnecting the power cord, always make sure  
that you take hold of the plug. Yanking out or bending the  
cord can damage it and/or cause electric shocks or a fire.  
Get into the habit of disconnecting the power plug before  
leaving home.  
with the “CD logo” or “  
surfaces.  
” mark on their disc label  
No guarantees are made for playback if discs which do not  
satisfy the appropriate CD standards are used.  
Similarly, no guarantees are made for their sound quality even  
if it is possible to play such discs.  
* To protect your discs from damage, avoid placing them  
in the following locations.  
7 Do not attempt repairs yourself  
Where they will be exposed to direct sunlight or where they  
will be close to a heater or other heat-radiating appliance  
Where the humidity level is high or it is very dusty  
Near a window or other such location where they may be  
exposed to rain  
Refrain from lubricating the player: doing so can cause  
malfunctioning.  
Only qualified engineers with specialized expertise are  
authorized to repair the pick-up and parts inside the player.  
* Get into the habit of putting the discs back in their cases  
after use.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE USING  
PRECAUTIONS  
LOADING BATTERIES  
In winter, droplets of water form on the insides of the  
windows of a heated room: this is called condensation. This  
player uses an optical lens, so the condensation may form  
in the following cases.  
- In a room immediately after the heating has been turned  
on  
- In a room where the humidity level is high  
- When the player has been suddenly brought from a cold  
location into a warm room  
Batteries in this remote control unit have a life of approximately  
1 year under normal operating conditions. If the remote control  
unit is not going to be used for an extended period of time,  
remove the batteries. Also, if you notice that the batteries are  
starting to run down, replace them as soon as possible.  
q Remove the battery cover.  
Since, in cases like this, the track numbers may not be  
read and the player is prevented from operating properly,  
wait about 30 minutes, and then operate the player.  
This player may cause interference on a tuner or TV set. If  
this is the case, place it further away from the tuner or TV  
set.  
Compact discs have much less noise than analog records  
and hardly any noise is heard before play starts. Bear in  
mind, therefore, that if the volume control on the amplifier  
is set too high, you will risk damaging other audio  
components.  
w Insert the batteries with correct +/orientation.  
Two AAA-size (R03) batteries  
This player is designed to play Super Audio CD and normal  
Audio CDs only. It cannot play CD-ROMs used with  
personal computers, game CDs, video CDs or DVDs (video/  
audio).  
We do not recommend the use of lens cleaners.  
e Close the battery cover until it clicks shut.  
USING REMOTE CONTROL UNIT  
Cautions on handling batteries  
Misuse of the batteries can result in electrolyte leakage,  
rupturing, corrosion, etc.  
Bear in mind the following points when using batteries.  
7 Remote control  
Operate the remote control unit (RC-11SAS1) within a distance  
of approx. 5 m from the infrared signal reception window  
(remote sensor) on the front of the Super Audio CD player.  
Remote control operation may not be possible if the remote  
control units transmitter is not pointing in the direction of the  
remote sensor or if there is an obstruction between the  
transmitter and the remote sensor.  
Remove the batteries from the remote control unit if  
the unit is not going to be used for a prolonged period  
(a month or more).  
Do not use an old battery together with a new one.  
Insert the batteries while ensuring that their  
and  
poles are properly aligned with the corresponding  
markings on the remote control unit.  
Remote control operating range  
Batteries with the same shape may have different  
voltages. Do not use different types of batteries  
together.  
If electrolyte has leaked, thoroughly wipe the inside  
of the battery compartment, and then insert new  
batteries.  
Approx. 5m  
When batteries which are no longer required are to  
be discarded, follow the directions (regulations) laid  
down by the local authorities in the area concerned  
for their disposal.  
60°  
Remote control unit (RC-11SAS1)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMES AND FUNCTIONS  
FRONT PANEL  
SUPER AUDIO CD PLAYER SA-15S1  
OPEN/  
CLOSE  
PLAY  
DISPLAY OFF  
STOP  
SOUND  
MODE  
POWER ON/OFF  
PHONES  
LEVEL  
PAUSE  
2
0
n b⁄  
1
c
zxv ⁄  
3
4
m , .  
zPOWER ON/OFF switch  
m
,
PAUSE button  
Press this button to pause playback. If pressed again, the  
unit returns to playback.  
This switch is used to turn the power ON and OFF. When  
it is pressed, the display window lights up, and the power  
comes on. When it is pressed again, the display window is  
extinguished, and the power goes off.  
STOP button  
Press this button to stop playback. Also this button is used  
to clear all programs.  
xDisc tray  
The disc to be played is placed on the tray.  
* Close the tray by pressing the operation button, not by  
pressing it in with your hand.  
.
PLAY button  
Press this button to start playback.  
cRemote sensor  
OPEN/CLOSE  
0
1
2
button  
The infrared control signal emitted from the remote control  
unit are sensed here.  
Press this button to open the tray. Put on a disk label side  
up. Press the button again to close the tray.  
vLCD  
DISPLAY OFF indicator  
This indicator turns on when the LCD screen is turned off  
(Off mode).  
This screen shows the operating status.  
SOUND MODE  
b
n
button  
Press this button to select the Super Audio CD sound mode.  
Super Audio CD (stereo) or Audio CD (if discs are sup-  
ported) (See page 12)  
Illumination lamp  
This lamp lights when the display window lights.  
This lamp may always remain off for certain settings. (See  
page 18)  
,
(Track Skip/Search buttons)  
These buttons can be used as both track skip and track  
search buttons. (The buttons on the main unit only.)  
3
4
PHONES (headphone) jack  
The headphones are connected to this jack. Use head-  
phones with a standard plug.  
: Each time this button is pressed, the track being  
played is skipped forward. When this button is  
held down, tracks are searched forward (Fast  
Forward).  
LEVEL (headphone volume) control  
This control is used to adjust the headphone volume. Turn  
it clockwise to increase the headphone volume.  
: When this button is pressed, the unit goes back  
to the beginning of the current track. If the button  
is pressed more times, the track being played  
is skipped back.When this button is held down,  
tracks are searched backward (Fast Rewind).  
In program play, Fast Forward and Fast Rewind can be  
done in the playing track only.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMES AND FUNCTIONS  
TIME  
5
button  
REMOTE CONTROLLER  
This button is used to switch from the text display to the  
time display when using a text-compatible Super Audio CD.  
It is also used to change the time display. Each time that it  
is pressed, the displayed time cycles from track elapsed  
time track remaining time total remaining time →  
track elapsed time . (See page 12)  
OPEN/  
CLOSE  
SOUND  
MODE  
b
¤
DISPLAY  
MENU  
TIME  
TEXT  
¤
RECALL  
SCROLL  
ENTER  
TEXT  
6
7
button  
INPUT  
AMP  
VOLUME  
This button is pressed to switch the main screen from the  
time display to the text display when using a text-compat-  
ible Super Audio CD. (See page 17)  
m
.
DISPLAY  
button  
This button switches the display screen on and off.  
¤
,
¤
The indicator turns on when Display Off is set. (See  
1
page 18)  
QUICK  
¤
8
9
0
-
(Numerical buttons)  
0
9
REPLAY  
¤
¤
¤
¤
¤
¤
A-B  
REPEAT  
Use these buttons to select tracks directory.  
AMS  
CANCEL  
2
RANDOM  
3
PROG  
1
PROG.  
button  
4
7
5
8
0
6
9
This button is for program play. (See page 15)  
,
(Track skip buttons)  
NOISE  
Function not  
available with  
SA-15S1  
SHAPER DC FILTER  
FILTER  
: When this button is pressed, the unit goes back to  
the beginning of the current track. If the button is  
pressed more times, the track being played is  
skipped back.  
DIGITAL OUT  
: Each time this button is pressed, the track being  
played is skipped forward.  
* Search buttons are provided separately for the remote  
control unit. Use ¤Search buttons for search function.  
RC-11SAS1  
¤
¤
1
2
,
(Search buttons)  
: While this button is pressed during playback, tracks  
are searched backward.  
: While this button is pressed during playback, tracks  
are searched forward.  
SOUND MODE  
b
m
,
.
button  
PAUSE button  
RECALL/SCROLL  
button  
STOP button  
PLAY button  
OPEN/CLOSE  
Use this button to scroll text while displaying text informa-  
tion in a Super Audio CD disc that supports TEXT.  
This button is also used for checking the programmed tracks  
during a program or when a program is stopped. (See page  
16)  
0
button  
The buttons listed above are the same to the buttons on the  
front panel of the main unit.  
Please see the correspond items in Front Panelsection.  
* In this instruction manual, some operations can only be performed with the remote control. For operations that can be  
performed with buttons both on the main unit and on the remote control, the button names are shown in the mark.  
And for operations that can only be performed with buttons on the remote control, the button names are shown in the  
mark.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMES AND FUNCTIONS  
CANCEL  
DIGITAL OUT  
¤
¤
3
4
button  
0
1
2
button  
Use this button to cancel a programmed track. (See page  
16)  
This button is pressed to turn the digital output for the Au-  
dio CD signal on and off. (See page 13)  
A-B  
INPUT  
(A-B Repeat button)  
button  
This button is to determine starting and ending points for  
A-B repeat play. (See page 14)  
This button switches the input selector (INPUT) of the  
Marantz PM-15S1 amplifier.  
RANDOM  
VOLUME  
¤
¤
¤
5
6
7
button  
button  
This button is for random play. (See page 15)  
This button is used to increase or decrease the volume of  
the Marantz PM-15S1 amplifier.  
AMS  
(Automatic Music Scan button)  
Use this button for AMS play. (See page 16)  
REPEAT  
button  
This button is for repeat play. Each time this button is  
pressed, repeat mode changes as follows. All Repeat→  
Track RepeatRepeat Off(See page 14)  
MENU  
ENTER  
¤
¤
8
9
button and  
button (Menu  
setup)  
These buttons are used to set the time for quick replay.  
(See page 17)  
QUICK REPLAY  
(Quick replay) button  
This button is used to do quick replay of the tracks. (See  
page 17)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMES AND FUNCTIONS  
REAR PANEL  
A
ANALOG OUTPUTS connectors  
D REMOTE CONTROL IN, OUT (input and out-  
put) connectors  
These are the output jacks of the analog audio signals.  
The supplied analog connection cord can be connected to  
the CD, AUX, or other connectors on an amplifier. Be sure  
to connect the L and R channels correctly to the corre-  
sponding jacks.  
When the remote control connectors on the player and on  
a Marantz AV component are connected using the acces-  
sory remote control connecting cables, the components  
can be operated as a system by remote control.  
* Never connect to the PHONO connector on the amplifier.  
When connecting to a component which is equipped  
with remote control connectors, the players REMOTE  
CONTROL IN connector must always be connected to  
the REMOTE CONTROL OUT connector on the other  
component to be connected.  
B DIGITAL AUDIO OUT COAX.  
It outputs the playing Audio CD signal in digital format.This  
jack is to be connected with a recording device, amplifier,  
D/A converter, etc that has coaxial digital input using an  
optional coaxial digital cable.  
When connecting a component which is not equipped  
with an infrared remote sensor, this component must  
always be connected to the players REMOTE CON-  
TROL OUT connector.  
* Nothing is output when digital output is set to off.  
* No signal will be output when a Super Audio CD is played.  
E EXT./INT. (Ext./Internal switch)  
C DIGITAL AUDIO OUT OPT.  
When this unit is used as a standalone component, set  
this switch to the INT. side. When it is used connected to  
external component by a remote connecting cable and to  
audio component with a remote sensor that supports re-  
mote controls by Maranz, set this switch to the EXT. side.  
It outputs the playing Audio CD signal in digital format.This  
jack is to be connected with a recording device, amplifier,  
D/A converter, etc that has optical digital input using an  
optional square type optical digital cable.  
* Nothing is output when digital output is set to off.  
* If the unit is used as standalone and the switch is set  
to EXT. position, remote control unit cannot be used.  
* No signal will be output when a Super Audio CD is played.  
F AC POWER INPUT JACK  
Connect the supplied power cord to this jack and a house-  
hold AC power outlet.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
        
        
        
        
NAMES AND FUNCTIONS  
DISPLAY  
c d e fghi j  
k
l
m
n
a
b
a Main display  
h PROG (program) indicator  
The time display and text information of the disc to be played  
as well as the setting menus and other displays appear on  
the main display.  
This lights during program play.  
i RNDM (random) indicator  
This lights during random play.  
b 1-20,  
(music calendar)  
The number of tracks recorded on the disc to be played,  
the number of remaining tracks to be played, and the num-  
ber of tracks programmed by program play appear here.  
j AMS (auto music search) indicator  
This lights during AMS playback.  
light when 21 or more tracks have been recorded on  
k CD, SUPER AUDIO CD, STEREO Disc  
the disc.  
indicator  
This indicates the type of disc on the disc tray.  
c 3 (play) indicator  
This lights during disc play.  
l TOTAL (total time) indicator  
When the total remaining time or the total program time is  
displayed, this lights above the display.  
d 8 (pause) indicator  
This lights when play is paused (temporarily stopped).  
m REMAIN (remaining time) indicator  
e
, ALL, 1 (repeat) indicator  
This lights during repeat play.  
When the remaining playback time of a track is displayed,  
this lights above the display.  
f A-B (A-B repeat) indicator  
n D OFF (digital output off) indicator  
This lights during A-B repeat play.  
This lights when the digital output setting for the CD signal  
is set to off. (See page 13)  
g TRK (track) indicator  
This lights above the display of the track number now play-  
ing, for instance.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
Depending on your amplifier/receiver/Stereo System, there are various ways to connect to this player. For correct connection  
please refer to instruction manuals of stereo system to be connected.  
Caution: Do not connect output from this unit to PHONO input of your audio system.  
1. Connect the audio cable qto this units front speaker outputs and the stereo inputs on your amplifier, receiver or stereo system.  
2. Connect the optical cable w, coaxial cable eto the digital input on your AV amplifier, D/A converter, CD-R, etc..  
* Signal will be output from the digital audio out jacks (OPT./COAX.) only when an Audio CD disc is played. No signal is output  
when playing a Super Audio CD.  
To Analog Audio output  
(white)  
(red)  
To Digital Audio  
output  
w
(Optional)  
e
(Optional)  
Audio cable q  
(Supplied)  
Example)  
PM-15S1  
To audio input  
terminals on amplifier  
Connect to digital input  
terminals of receiver, D/A  
converter or CD recorder,  
etc..  
Left  
speaker  
Right  
speaker  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
* In this instruction manual, some operations can only be performed with the remote control. For operations that can be  
performed with buttons both on the main unit and on the remote control, the button names are shown in the  
mark.  
And for operations that can only be performed with buttons on the remote control, the button names are shown in the  
mark.  
CONNECTING THE POWER SUPPLY  
NORMAL PLAYBACK  
1 Plug the power cable into AC IN jack on the back panel.  
7 Super Audio CD player playback  
SUPER AUDIO CD PLAYER SA-15S1  
OPEN/  
CLOSE  
PLAY  
DISPLAY OFF  
STOP  
SOUND  
MODE  
POWER ON/OFF  
PHONES  
LEVEL  
PAUSE  
-
+
AC IN  
w, e  
q
r
qPress POWER switch to turn on.  
LCD  
2 Turn on the power switch of the audio unit (amplifier, etc.)  
that is connected with this unit. Set the selector on the  
connected unit to this unit.  
The display cycles from TOC Reading No Disc (when  
no disc is loaded) Super Audio CD (when the start sound  
mode setting is Super Audio CD).  
3 Plug the power cable into an AC outlet.  
wPress the OPEN/CLOSE button  
The disc tray comes out. Place the disc with label side up  
on the tray.  
To play a single (8cm) CD, place the disc with the  
indentation at the center of the tray.  
ePress OPEN/CLOSE button.  
rPress  
PLAY button.  
Disc type is automatically detected and playback is started.  
Track number and track elapsed time(minute, second)  
appear on the display.  
* For Super Audio CD/CD hybrid-layer discs (See page 2),  
the layer that is set in the start sound mode (See page  
SOUND MODE  
13) is played. To change the layer, use the  
button. (See page 12)  
(Exp.:Track 6, Elapsed time 2 min 8 sec)  
Number of current track  
Minutes  
Seconds  
Remaining track numbers  
Playback automatically stops at the end of the final track.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
To start playback form the first track  
7
Switching Sound Mode (Super Audio  
CD)  
Press  
PLAY button.  
To stop playback  
STOP  
Press  
button.  
SUPER AUDIO CD PLAYER SA-15S1  
OPEN/  
PLAY  
CLOSE  
DISPLAY OFF  
STOP  
To eject disc  
Press OPEN/CLOSE button to open the disc tray and take the  
disc off. Press the button again to close the tray.  
Disc tray must be closed when the unit is not be used.  
SOUND  
MODE  
POWER ON/OFF  
PHONES  
LEVEL  
PAUSE  
-
+
SOUND MODE  
Button  
To pause playback  
Press  
PAUSE indicator will light and playback is paused at the point  
that the button is pressed.To restart playback, press  
button again or press button.  
PAUSE button.  
SOUND MODE  
qPress  
button in stop mode (not  
PAUSE  
playing).  
PLAY  
The currently selected layer or area is shown on the LCD.  
(CD or Super Audio CD)  
To change time display  
Press the TIME button on the remote control.  
Each time TIME button is pressed, display will change in the  
following order. Track elapsed timeTrack remaining time”  
Total remaining timeTrack elapsed time.  
SOUND MODE  
If  
button is pressed again, a playable layer or  
area will be shown, and the layer or area will be switched  
to new one.  
* When layer or area is switched, TOC will be read again.  
* The sound mode cannot be changed for Audio CDs and  
discs with only a Super Audio CD area.  
Track remaining time  
* The sound mode on hybrid layer discs will be changed in  
the following order.  
Super Audio CD stereo area CD layer Super Audio  
CD stereo area  
(The remaining playing time from the playing point to  
the end of the current track)  
REMAIN”  
“–” is displayed  
is displayed  
* Sound mode can be selected while the tray is open.Select  
a desired layer or area and press  
button then  
PLAY  
the tray will close and playback will be started.  
SOUND MODE  
w
Press the  
button during playback.  
Total remaining time  
The currently selected layer or area is shown on the LCD.  
(CD or Super Audio CD)  
(The remaining playing time from the playing point to  
the end of the last track)  
SOUND MODE  
If  
button is pressed again, the playback is  
stopped, and the layer or area will be switched to new one.  
TOTAL REMAIN”  
When you want to listen at that area, press  
again. The playback will be started.  
button  
PLAY  
“–” is displayed  
is displayed  
* If TIME button is pressed when Super Audio CD disc that  
supports text is in use, time display is given priority and the  
text information will not be displayed afterward. To see the  
text information, press  
button.  
TEXT  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
START SOUND MODE  
7 Digital output off operation  
The digital output function is turned on and off by pressing the  
DIGITAL OUT  
When a Super Audio CD hybrid layer discs that has both a  
Super Audio CD high sound quality stereo area and an Audio  
CD area information are to be played, this player makes it  
possible to set the layer/area (Super Audio CD or Audio CD)  
to be preferentially played.  
button while the track is stopped. When digital  
output is turned off, the D OFF indicator lights up on the LCD.  
* When digital output is not used, setting to digital output off  
enables you to enjoy better sound quality.  
Note  
This setting can be made when the tray is closed and there is  
no disc in the disc tray.  
* The digital output off have a memory retention function where  
the settings remain stored and unchanged even when the  
disc is changed or the power is turned off.  
SOUND MODE  
qPress  
button on the player.  
The currently selected layer/area is displayed.  
If the Super Audio CD is selected  
If the Audio CD is selected : CD  
:
Super Audio CD  
SOUND MODE  
wPress the  
button again to display the layer/  
area to be played first, and then leave the setting for at  
least two seconds to register the setting for the start sound  
mode.  
Caution  
* Start sound mode has a memory retention function where  
the settings remain stored and unchanged even when the  
disc is changed or the power is turned off.  
* At the time of shipment, the sound mode is set to Super  
Audio CD.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
PLAYING YOUR FAVORITE  
TRACKS OF A DISC  
REPEATED DISC PLAY  
(REPEAT PLAY)  
7 Specify track number to play  
(Direct Search)  
Specify track number with numerical buttons (0-9)  
7 All track repeat  
When  
button on the remote is pressed, “ ” ALL”  
REPEAT  
indicator will light up and all track repeat play begins.  
on the remote  
(example)  
To Return to Normal Play  
Press  
button two times. “ ” ALLindicator will  
REPEAT  
3
3rd track : Press  
12th track : Press  
.
disappear, repeat mode will be off and it returns to normal  
play mode.  
1
and then press  
2
(within  
approximately 1.5 seconds).  
REPEAT  
* If  
button is pressed when in program mode,  
If the first pressed number is only in the digit of ones and not  
in the digit of tens, search begins approximately 0.5 second  
after.  
programmed tracks are played repeatedly.  
7 One Track Repeat  
If a wrong number is pressed  
Press  
button on the remote two times.  
REPEAT  
, 1indicators will light and the track will be played  
Press correct number again.  
repeatedly.  
* If a track number that is not in the disc is specified, No Track”  
will be shown on the main display. Please specify a correct  
track.  
To Exit from One Track Repeat  
Press  
button.1indicator will disappear, repeat  
REPEAT  
mode will be off and it returns to normal play mode.  
7 Skipping to the previous or next  
track (Track Skip)  
7 A-B Repeat  
To listen to a track posterior to the current track  
AB  
q Press  
button on the remote at your chosen starting  
Press  
buttons on the main unit or  
button on the  
point. The A-indicator will blink.  
remote the number of times you want to proceed tracks.  
AB  
w
Press  
button again at your chosen end point. A-B“  
indicator will light up and the chosen section will be played  
repeatedly.  
To listen to a track prior to the current track  
Press  
remote go back to the beginning of the current track. Then  
press buttons on the main unit or button on the  
buttons on the main unit or  
button on the  
To Exit from A-B Repeat  
AB  
Press  
button on the remote. A-Bindicator will  
remote the number of times you want to go back.  
disappear, A-B repeat mode will be off and it returns to normal  
play mode.  
* A-B repeat cannot be done when random play is going on.  
PLAYINGYOUR FAVORITE  
PARTS OF A DISC (SEARCH)  
* The end point (where A-indicator is blinks) of the repeat  
section cannot be set before the time of the starting point  
(where A-Bindicator light up) of the repeat section.  
If  
,
buttons on the main unit or  
,
buttons on the remote are kept pressing during playback, track  
search begins. Release the button when the point you want to  
listen to gets close.  
* No sound is output during the search operation.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
PLAYING TRACKS IN A RANDOM  
SEQUENCE (RANDOM PLAY)  
PLAYING TRACKS IN A SPECIFIC  
SEQUENCE (PROGRAM PLAY)  
When  
and then  
button on the remote is pressed in stop mode,  
button is pressed, the unit shuffles track  
You can arrange and play tracks in a specific sequence. Up to  
30 tracks to be played can be programmed.  
RANDOM  
PLAY  
order automatically and plays all the tracks in the shuffled order.  
The RNDM (random) indicator lights.  
(Example:To program the 7th track after 15th track in  
a disc with 25 tracks)  
The gap between tracks will be approximately 2 seconds  
during random play.  
To Exit from Random Play and Return to Normal Play  
STOP  
Press the  
button, and then press the RANDOM button  
while playback is stopped.  
The RNDM (random) indicator goes off, and random play is  
released.  
PROG.  
q Press  
button on the remote in stop mode. PROG”  
indicator will blink and it goes to program mode.  
Lights up  
If  
buttons on the main unit or  
button on  
the remote are Pressed during Random Play  
It jumps to the next track of the shuffled order.  
If  
,
buttons on the main unit or  
,
w Choose a track to be programmed with numeric buttons  
buttons on the remote are Pressed during Ran-  
on the remote.  
dom Play  
Search will be done only in the current track. Search does not  
go to the previous or next track.  
(Example: The 15th track is chosen and its length is  
4min30sec)  
Lights up  
To Listen to Random Play Repeatedly  
Press  
play. Every time the order will be shuffled.  
If button is pressed during program play, the  
programmed tracks will be shuffled.  
button on the remote once during random  
REPEAT  
RANDOM  
1st track  
Only the numbers of  
programmed tracks light up  
programmed  
e With the sequence described in step w above, program  
another track. Repeat that sequence to program all the  
tracks you want.You can program up to 30 tracks.  
(Example:The 7th track is chosen and total length of  
7th and 15th is 7min50sec)  
Lights up  
Total programmed number  
Total playing time of  
programmed tracks  
PLAY  
r Press  
button to starts playback in programmed  
order.  
* When 21 or more tracks are programmed,  
instead of the track number indicator.  
will light up  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
To Check the Programmed Tracks  
Q&A  
Press the  
button on the remote control during  
RECALL/SCROLL  
the program or when the program is stopped (PROGlights  
How many tracks can be programmed?  
Up to 30 tracks can be programmed for program play.  
up).  
Every time press  
tracks will be displayed one after the other in order.  
button, the programmed  
RECALL/SCROLL  
Can I listen to program play repeatedly?  
Press  
button once. “ ” ALLindicator will  
REPEAT  
To Delete a Programmed Track  
light and program play will be repeated.  
q
Press  
button in stop mode when program has been  
CANCEL  
made (When PROGindicator is lighting up).  
Can I shuffle the programmed track order?  
Press  
button in stop mode.  
RANDOM  
w
Every time press button, the programmed tracks  
CANCEL  
are deleted in order from the last track programmed.  
Also, the deleted tracks track number indicator will  
disappear.  
To Clear Whole Program  
SEARCHINGYOUR FAVORITE TRACKS  
(AMS (AUTOMATIC MUSIC SCAN) PLAY)  
Press  
STOP button two times while in program play. In the  
stop mode, press  
STOP button once.  
Program can also be cleared by pressing  
to open the disc tray.  
key  
OPEN/CLOSE  
This feature is convenient to search where your favorite track  
is.  
To Add Tracks to Program  
If the AMS button is pressed while a track is stopped, the  
AMS indicator lights up, and the first ten seconds of each track  
on the disc will be played starting from the first track.  
Also, if the AMS button is pressed during playback, the AMS  
indicator lights up, and the program jumps to the next track  
after approximately 10 seconds elapses on the display time.  
Tracks can be added to the end of program when program is  
remaining (PROGindicator is lighting up) and in stop mode.  
However tracks cannot be added to the program when the  
RNDM (random) indicator is lit up.  
* Please be careful about the following matters.  
Light up  
When programming 1st through 9th tracks in a disc that  
has over 10 tracks by using numeric buttons. For instance,  
programming the 3rd track after programming the 1st track,  
press 3 button more than approximately 1.5 seconds after  
1 button is pressed. When a program is finalized, the time  
is updated.  
Once you find a song that you want to listen to, press the AMS  
PLAY  
button again or press the  
button. The AMS indicator  
Likewise, when programming a track at 10th or after. For  
example, to program 13th track, press 3 button within  
approximately 1.5 seconds after 1 button is pressed.  
When programming a track in a disc that has less than 9  
tracks. For instance, to program the 5th track after 4th track  
has been programmed, press 5 button more than  
approximately 0.5 second after 4 button is pressed.  
turns off, and normal playback resumes from the current track.  
* If the AMS button is pressed after the tracks are programmed,  
only the programmed tracks are played by AMS.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
QUICK REPLAY  
ABOUT THE TEXT  
INFORMATION DISPLAY  
QUICK REPLAY  
When  
button is pressed during playback, the  
unit goes back to the amount of time set by the MENU and  
starts playback from there.  
The following items of text information in Super Audio CD discs  
can be displayed by pressing TEXT button on the remote.  
Nevertheless, which items of information are recorded depends  
on discs so some information may not be displayed. This unit  
skips unrecorded information to display.  
* Playback that goes beyond the track is not allowed.  
Also, when the total time of the track being played is shorter  
than the time set for quick replay, or when the playback time  
QUICK REPLAY  
is shorter than the time set for quick replay, if  
button is pressed, the track will be goes back to the start of  
that track and playback is started from there.  
During playback  
When TEXT button is pressed on the remote, Track Titleof  
the currently playing will be displayed.  
To Set Quick Replay Time  
q If a disc is loaded in the disc tray, eject the disc and close  
In Stop Mode  
Each time TEXT button on the remote is pressed, text  
the tray.  
information will be displayed in the following order.  
w Press the  
button on the remote control.  
MENU  
Time Display  
Album Title  
Album Artist  
ENTER  
e Press the  
button on the remote control while Quick  
Replay is displayed (approx. 3 seconds).The current time  
setting appears on the LCD. (The default setting is 10  
seconds.)  
This unit can display 12 characters in one time. If  
information is longer than 12 characters, the display will  
scroll right to left.  
This unit can display only alphabets, numeric numbers and  
symbols. Chinese and Japanese characters cannot be  
displayed. If information is in Chinese and Japanese  
characters, the unit displays nothing.  
r Use the  
or  
button to set the time. (5 to 60 seconds)  
button twice.  
t After making the setting, press the  
MENU  
The LCD returns to the normal display.  
y The time setting is retained even when the power is turned  
off.  
Caution:  
* When there is no key input for about 3 seconds during this  
series of operations, the setting will be configured to the  
conditions at that time and the display will return the time  
display.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
TURNING OFF THE DISPLAY AND  
TIMER PLAY  
ILLUMINATION (DISPLAY OPERATION)  
This unit can perform timer play by cooperating with your audio  
timer.  
Connect this units power cord to the audio timers power socket  
and the timers power cord to power outlet.  
This function is used to turn the LCD and illumination lamps  
(blue) on and off. (Two display statuses are available.)  
* For connection to audio timer and its operation, please refer  
to the instruction manual of your audio timer.  
1. Mode where LCD and illumination lamp (blue) turn on  
Each time the DISPLAY button is pressed during playback,  
the LCD and illumination lamp (blue) switch on and off.  
When Display Off is set, the Display Off indicator (red) lights  
up.  
Audio Timer  
* When any related button is pressed (such as when the  
STOP  
button,  
button, or  
button is  
OPEN/CLOSE  
used), the display is automatically turned on, but the  
Display Off indicator (red) remains lit. If a track is started  
in this state, the display is automatically turned off two  
seconds later.  
* When a track is stopped, the Display Off indicator (red)  
and illumination lamp (blue) light up alternately.  
2. Setting for turning on only LCD (illumination lamp (blue)  
remains off)  
Setting method of Timer Play  
In the default state, the illumination lamp (blue) is lit. In this  
state, the illumination lamp (blue) remains off regardless  
of whether the LCD is turned on or off.  
q Press POWER switch to turn ON the power.  
w Insert the disc to be played.  
Changing procedure (Changes can be made when operation  
is stopped.)  
* In timer play mode, tracks are played normally.  
STOP  
q If playback is in progress, press the  
button to stop  
e Set the audio timer.  
DISPLAY  
playback. To make the setting, hold down the  
button for at least two seconds from the remote control  
(RC-11SAS1).  
w If the illumination lamp (blue) is lit, it is turned off and is set  
off. To change the setting from off to on, hold down the  
DISPLAY  
same operation  
to turn on.  
button for at least two seconds  
* The illumination lamp (blue) off setting is retained even when  
the power is turned off, and this setting remains until the  
setting is changed to the on setting.  
* The LCD display on/off setting is not retained when the power  
is turned off. (This enables you to enjoy operation each time  
you use it.)  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLE SHOOTING  
If you think a malfunction has occurred, first check the points listed below. The problem is likely to have been caused by a simple  
operational error or a connection problem. If the problem cannot be corrected even after carrying out the following checks, consult  
your dealer or nearest Marantz sales office or service counter.  
The disc fails to rotate.  
A Super Audio CD cannot be played.  
1. Is the mains lead plugged in properly?  
2. Is the POWER switch ON?  
3. Is the disc placed in the correct position on the disc tray?  
4. Is the disc placed properly with the label side facing up?  
5. Is the disc dirty?  
1. Is the disc scratched, dirty or warped?  
2. Is the amplifiers input selector set to digital? (Digital audio  
signal will not be output when a Super Audio CD is played.)  
3. Is the disc a Super Audio CD multi-channel only disc? (This  
unit does not support Super Audio CD multi-channel.)  
6. Is the disc scratched?  
7. Is the disc warped?  
A CD-R/CD-RW disc cannot be played.  
1. Is the disc placed upside down?  
The disc is rotating but no sound is heard.  
2. Is the disc contains properly written TOC?  
3. Is the recorded information in an audio (CD-DA) format?  
1. Are the amplifier and speakers connected properly?  
2. Is the amplifier switch ON?  
3. Is the amplifiers function or selector switch set to CDor  
AUXor such (to whatever you have connected this unit  
to)?  
A specific CD cannot be played  
Copy control CDs (CDs with copy guard) are special discs  
that do not comply with current CD standards. Marantz  
cannot guarantee the ability to play such discs on your CD  
player.  
4. Is the amplifiers volume control set at the minimum level?  
The disc stops in mid-operation.  
The sound drops out or noise is heard.  
When normal CDs can be played without a problem and  
problems occur only when playing these special discs, it is  
not a problem with this unit.  
1. Is the disc dirty?  
2. Is the disc scratched?  
3. Is the disc warped?  
Please ask the seller of the copy control CD for detailed  
information regarding copy control CDs.  
* In the case of a CD-R or CD-RW disc, this problem may  
occur when the conditions under which its data was originally  
written were substandard or when the quality of the disc itself  
is poor.  
* This condition may occur in Mixed-Mode CDs, CD Extra,  
and other discs that have CDDA format mixed with other data.  
Noise may also be heard momentarily when skipping tracks.  
The unit makes a clicking sound when the tray closes  
This is the adhesion click of the clamper for securing the  
disc. This does not cause any problem in using the unit.  
While the disc is spinning, a spinning sound is heard  
or a slight vibration occur.  
Depending on the disc, a spinning sound may occur or the  
unit may vibrate slightly due to disc eccentricity or such.  
This is not a problem with this unit.  
Remote control operation is not possible.  
1. Is the transmitter of the remote control unit (RC-11SAS1)  
pointed correctly at the remote sensor on the front of the  
player (this unit)?  
Or is there an obstruction between the transmitter and the  
remote sensor?  
2. Are the batteries in the remote control unit exhausted?  
3. Is there another strong light (from a window, etc.) striking  
the Super Audio CD players remote sensor?  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Super Audio CD  
Audio CD  
Audio Characteristics  
Analog output  
Channels  
2channels  
2Hz — 100kHz  
2Hz — 50kHz (-3dB)  
111dB  
2channels  
2Hz — 20kHz  
2Hz — 20kHz  
100dB  
Frequency range  
Frequency characteristics  
Dynamic range  
THD (1kHz)  
0.002%  
0.002%  
wow & flutter  
Output level  
Precision of quartz  
2.1V RMS stereo  
Precision of quartz  
2.1V RMS stereo  
Digital output  
output level (cinch JACK)  
output level (optical)  
0.5Vp-p (75)  
-19dBm  
Optical Readout System  
Laser  
Wave length  
AlGaAs  
650nm  
AlGaAs  
780nm  
Signal format  
Sampling frequency  
1-bit DSD  
2.8224MHz  
16-bit linear PCM  
44.1kHz  
Power Supply  
U Version ...................................................................................................................... AC 120V 60Hz  
Power Consumption.......................................................................................................................22W  
Cabinet, etc.  
Dimensions (Width × Height × Depth).............. 17-5/16 × 4-13/16 × 16-1/2 ins. (440 × 123 × 419mm)  
Net weight .................................................................................................................. 29.8 lbs (13.5kg)  
Operating temperatures ..................................................................................................+5°C ~ +35°C  
Operating humidity ............................................................................................ 5 ~ 90% (without dew)  
Accessories  
• Remote control unit (RC-11SAS1).................................................................................................. 1  
Dimensions (Width × Height × Depth)................ 1-15/16 × 7/8 × 6 ins. (48.5 × 21.5 × 152.5mm)  
Net weight .......................................................................................................... 0.352 lbs (160g)  
• AAA (R03) Batteries ....................................................................................................................... 2  
• AC Power cord ............................................................................................................................... 1  
• Audio cable .................................................................................................................................... 1  
• Remote connection Cable .............................................................................................................. 1  
• User’s Guide ................................................................................................................................... 1  
• Warranty card for USA.................................................................................................................... 1  
• Warranty card for CANADA ............................................................................................................ 1  
Specifications subject to change without prior notice.  
I Dimensions  
16-7/16 ins.  
(418 mm)  
17-5/16 ins.  
(440 mm)  
SUPER AUDIO CD PLAYER SA-15S1  
OPEN/  
CLOSE  
PLAY  
D
I
S
P
L
A
Y
O
F
F
STOP  
SOUND  
MODE  
POWER ON/OFF  
PHONES  
LEVEL  
PAUSE  
-
+
Download from Www.Somanuals.com. All Manuals Search And Download.  
You can find your nearest authorized distributor or dealer on our website.  
U.S.A.  
Marantz America, Inc.  
Marantz Europe B.V.  
1100 Maplewood Drive, Itasca, IL 60143, U.S.A.  
EUROPE  
P.O. Box 8744, 5605 LS Eindhoven, The Netherlands  
is a registered trademark.  
Printed in Japan  
09/2005 00M24AK851250 mzh-g  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KWC Indoor Furnishings K28H31000099 User Manual
Lennox Hearth Indoor Fireplace ULC S610 User Manual
LG Electronics Projector Accessories 42SH7DB User Manual
LST Network Card M201E 240 User Manual
Makita Chainsaw DCS460 User Manual
Marshall Amplification Stereo Amplifier GV 2 User Manual
Mattel Baby Toy L3006 0920 User Manual
Memorex Cassette Player MKS 3001 User Manual
Memorex Clock Radio MMG CR3810 User Manual
MicroBoards Technology DVD Recorder QD MultiDrive User Manual