Marantz CD Player CD5003 User Manual

ESPAÑOL

FRANÇAIS

ENGLISH

CD Player

CD5003

Download from Www.Somanuals.com. All Manuals Search And Download.

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and

receiver.

- Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV

technician for help.

NOTE:

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

NOTE:

Changes or modiﬁcations may cause this unit to fail to

comply with Part 15 of the FCC Rules and may void

the user's authority to operate the equipment.

This Class B digital apparatus complies with Canadian

ICES-003.

Cet appareil numerique de la Classe B est conforme a

la norme NMB-003 du Canada.

DECLARATION OF CONFORMITY

This device complies with Part 15 of the FCC rules. Operation is subject to the

following conditions: (1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause

undesired operation.

U.S. Responsible Party: Marantz America, Inc.

100 Corporate Drive,

Mahwah, NJ, 07430, U.S.A.

TEL: 201-762-6500

Type of Product:

Model:

CD player

CD5003

OPT_080602U2

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

INTRODUCTION

CONTENTS

Thank you for selecting the Marantz CD5003 CD Player for your A/V system.

This Compact Disc Player incorporates a number of features designed to enhance the listening of your

favorite audio sources.

Please read these operating instructions carefully.We recommend that you read the entire user guide before

you attempt to connect or operate the player.

PROGRAM PLAY (PLAYING TRACKS IN THE

PREFERRED SEQUENCE) ...........................16

FEATURES ..........................................2

BEFORE USING ..................................3

EQUIPMENT MAINS WORKING SETTING.....3

DELETE PROGRAM PLAY (PLAY WITH

UNDESIRED TRACKS SKIPPED) .................17

CD-TEXT........................................................20

After you have reviewed the contents of this manual,we suggest that you make all system connections

before you attempt to operate the unit.

INAPPROPRIATE PLACES FOR

PITCH CONTROL (CHANGING THE PLAY

INSTALLATION.................................................3

SPEED) ..........................................................21

DO NOT PLACE OBJECTS ON TOP...............3

CAUTIONS ON HANDLING MAINS CORD .....3

DO NOT ATTEMPT REPAIRS YOURSELF ......3

PRECAUTIONS................................................3

PEAK SEARCH (SEARCHING FOR THE

• Remote control connecting cord

Checking the accessories

After opening the cover of the packing box, check

LOUDEST PASSAGE)....................................21

EDITING (RECORDING A DISC ON A TAPE)22

MENU.............................................................24

DIGITAL OUTPUT OFF ..................................24

AUDIO EX SELECTION .................................24

PLAYBACK ORDER OF MP3/WMA FILES....25

MP3/WMA PLAYBACK MODE SELECTION..26

PLAYING MP3/WMA FILES ...........................26

SELECTING THE FOLDER TO LISTEN TO...26

PLAYING A SPECIFIC FILE...........................27

that the following accessories are included.

• Remote controller

NAMES AND FUNCTIONS..................5

FRONT PANEL.................................................5

DISPLAY...........................................................6

REMOTE CONTROLLER.................................7

REAR PANEL ...................................................8

• User Guide

BASIC CONNECTIONS.......................9

CONNECTING TO AN AMPLIFIER..................9

CONNECTING THE POWER SUPPLY ............9

PLAYING A SPECIFIC PART OF A SPECIFIC

FILE................................................................27

BASIC OPERATIONS –AUDIO CD– 10

PLAYING CDS................................................10

PLAYING A SPECIFIC TRACK.......................10

REPEAT PLAY (PLAYING THE SAME FILES

REPEATEDLY)................................................27

• Warranty Card (USA x 1, Canada x 1)

RANDOM PLAY (PLAYING FILES IN A

PLAYING A SPECIFIC PART OF A SPECIFIC

TRACK............................................................11

RANDOM SEQUENCE) .................................28

• Size “AAA” batteries x 2

AMS PLAY (SEARCHING FOR A SPECIFIC

FILE)...............................................................29

ADVANCED CONNECTIONS............12

CONNECTING TO A DIGITAL AUDIO

COMPONENT ................................................12

TROUBLESHOOTING .......................30

OTHERS.............................................31

NOTES ABOUT THE DISCS..........................33

ABOUT PLAYING COPY-CONTROLLED CDS ...33

REMOTE CONTROL CONNECTION.............13

FLASHER INPUT CONNECTOR ...................13

• AC Power cord

ADVANCED OPERATIONS –AUDIO CD–..14

REPEAT PLAY (PLAYING THE SAME TRACKS

REPEATEDLY)................................................14

RANDOM PLAY (PLAYING TRACKS IN A

RANDOM SEQUENCE) .................................14

AMS PLAY (SEARCHING FOR A SPECIFIC

TRACK) ..........................................................15

• Audio connecting cord

WHILE PLAYING, REPLAY A SMALL TRACK

PORTION AND LISTEN AGAIN (QUICK

REPLAY).........................................................15

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

FEATURES

•

Using Marantz original HDAM^®SA2 • High grade headphone circuit

• Quick replay function

(Audio CDs only)

By a single-action operation, the “quick replay”

function enables play to be moved back from the

current play position for the time equivalent to the

setting (setting range: 5 to 60 seconds) and play to

The unit uses an HDAM^®SA2, whose quality has

The high-grade headphone circuit incorporates a

high-speed buffer amplifier to enable headphone

listening of high quality sound reproduction, late at

night or in other such situations.

been proved in Super Audio CD players and high-

end amplifiers, as a high-speed buffer amplifier.

You can enjoy the high speed and high-quality

sound like that produced by high-end equipment.

• Supports MP3 and WMA file be resumed.

•

Incorporates a Cirrus Logic

advanced D/A converter, CS4392

This function makes it possible to return to a part

playback

MP3 and WMA files that have been recorded onto

CD-R or CD-RW discs can be played back on this

CD player. (page 25)

of the track that was just played so it can be heard

again. (page 15)

The unit adopts CS4392 corresponding to Cirrus

Logic 192 kHz/24 bit in a D/A converter, which is

the important element for deciding sound quality,

the same with the highly reputed Marantz Super

Audio CD player. The Cirrus Logic converter is a

high quality device that supports Super Audio CD

and DVD-Audio content.

• Supports CD-Text display

CD-Text is an extension to the existing audio CD

standard that enables text information, such as the

name of the artist, album title and song titles to be

stored on an audio CD.

• Pitch control function

(Audio CDs only)

The “pitch control” function enables the play speed

(pitch) to be varied over a ±12 step. (page 21)

(This model is only suitable for reproduction of

Audio CDs or MP3/WMA files)

CDs with the following logos support this function.

CD TEXT

• Audio EX function

TEXT

Audio EX mode, which allows setting of pitch

control, digital output, and display function to OFF,

is provided in order for you to enjoy higher quality

sound. (page 24)

Text information is recorded on the parts that are not

used in the conventional Audio CDs.

This CD player enables the text information stored

on a CD-Text CD to be read (applies only to English

alphanumeric text).

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

BEFORE USING

This section must be read before any connection is

made to the mains supply.

PRECAUTIONS

INAPPROPRIATE PLACES

FOR INSTALLATION

DO NOT PLACE OBJECTS

ON TOP

• In winter, droplets of water form on the insides

of the windows of a heated room: this is called

condensation. This CD player uses an optical

lens, so the condensation may form in the

following cases.

To keep your player in perfect working order for the

longest possible time, avoid installing the player in

the following locations.

• Refrain from placing any objects on top of the

player.

EQUIPMENT MAINS

WORKING SETTING

• Wherever it will be exposed to direct sunlight

Your Marantz product complies with the household

power and safety requirements in your area.

This product can be powered by 120 V AC only.

- In a room immediately after the heating has

been turned on

• Wherever it will be close to a heater or other

heat-radiating appliance

CAUTIONS ON HANDLING

MAINS CORD

- In a room where the humidity level is high

• Wherever the humidity is high or ventilation is

poor

- When the player has been suddenly brought

from a cold location into a warm room

• Do not touch the mains cord with wet hands.

• Wherever it is very dusty

• When disconnecting the mains cord, always

make sure that you take hold of the plug. Yanking

out or bending the cord can damage it and/or

cause electric shocks or a fire.

Since, in cases like this, the track numbers may

not be read and the player is prevented from

operating properly, wait about 30 minutes, and

then operate the player.

• Wherever it will be subject to vibration

Recording and playback of any material may

require consent. For further information refer to the

following:

• On top of a rickety stand or in an unstable

location which is tilted at an angle

• Get into the habit of disconnecting the power

plug before leaving home.

— Copyright Act 1956

• On top of an amplifier or other component which

dissipates a great deal of heat

• This player may cause interference on a tuner or

TV set. If this is the case, place it further away

from the tuner or TV set.

— Dramatic and Musical Performers Act 1958

— Performers Protection Acts 1963 and 1972

• In an audio rack with little space at the top

and bottom or other location where the heat

dissipation will be obstructed

To ensure proper heat dissipation, install the

player while leaving clearances between the

player and wall or other components, as shown

in the figure below.

• Compact discs have much less noise than

analog records and hardly any noise is heard

before play starts. Bear in mind, therefore,

that if the volume control on the amplifier is set

too high, you will risk damaging other audio

components.

— any subsequent statutory enactments and

orders

DO NOT ATTEMPT REPAIRS

YOURSELF

• Refrain from lubricating the player: doing so can

cause malfunctioning.

• Only qualified engineers with specialized

expertise are authorized to repair the pick-up

and parts inside the player.

• This audio player is for the exclusive playing

of Audio CDs (Compact Discs) and MP3/WMA

compressed data files.

4 inchs (0.1 m)

or more

4 inchs (0.1 m)

or more

4 inchs (0.1 m)

or more

CD PLAYER CD5003

MP3/WMA

STANDBY

POWER ^ON/STANDBY

DISPLAY

OFF

PHONES

LEVEL

It cannot play CD-ROMs used with personal

computers, game CDs, video CDs, DVDs (video/

audio) or DTS-CDs.

4 inchs (0.1 m)

or more

• We do not recommend the use of lens cleaners.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

BEFORE USING

Loading batteries

Cautions on handling batteries

Usage of remote controller

Before using the remote controller for the first time,

load the batteries in the remote controller. The

batteries provided are used to verify the operations

of the remote controller only.

Misuse of the batteries can result in electrolyte

leakage, rupturing, corrosion, etc.

Bear in mind the following points when using

batteries.

Operational range

Operate the unit with the remote controller within

the range of the illustration below.

• Remove the batteries from the remote control

unit if the unit is not going to be used for a

prolonged period (a month or more).

Remove the battery cover.

• Do not use an old battery together with a new

one.

• Insert the batteries while ensuring that their

ª and · poles are properly aligned with the

corresponding markings on the remote control

unit.

60°

• Batteries with the same shape may have different

voltages. Do not use different types of batteries

together.

Precautions

Insert the batteries with correct +/– orientation.

• If electrolyte has leaked, thoroughly wipe the

inside of the battery compartment, and then

insert new batteries.

• Donotallowdirectsunlight,aninverterfluorescent

light or other strong source of light to shine onto

the player’s infrared signal reception window

(remote sensor). Otherwise, the operation of the

remote control unit may be disabled.

• When batteries which are no longer required

are to be discarded, follow the directions

(regulations) laid down by the local authorities in

the area concerned for their disposal.

• Bear in mind that operating the remote control

unit may cause other devices operated by

infrared rays to be operated by mistake.

• The remote control unit cannot be operated if the

space between the controller and the player’s

remote sensor is obstructed.

Close the battery cover until it clicks shut.

• Do not place any objects on top of the remote

control unit. Doing so may cause one or more

buttons to be held down which will cause the

batteries to run down.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

NAMES AND FUNCTIONS

FRONT PANEL

w er

u io

CD PLAYER CD5003

MP3/WMA

STANDBY

DISPLAY

OFF

POWER ^ON/STANDBY

PHONES

LEVEL

q POWER ON/STANDBY switch and r 4/1 (previous track/search i 7(STOP) button

! MP3/WMA Indicator

Standby indicator

backward) button

This is used to stop play.

This lights up when an MP3/WMA file is being

played.

This is used to turn the player’s power ON and

STANDBY. When it is pressed, the display lights

and the power is turned on; when it is pressed

again, the power is turned off and STANDBY

indicator lights.

When this button is pressed, play returns to the

start of the track now being played. The same

number of tracks as the number of times the

button is pressed can be skipped in the reverse

direction. When the button is held down, tracks

are searched (fast backward).

o 8(PAUSE) button

! DISPLAY OFF indicator

This is used to temporarily suspend play.

This lights in the DISPLAY OFF mode (when the

display is off).

! PHONES LEVEL control

This is used to adjust the headphones volume

level. The level increases when it is turned

clockwise.

w 0(OPEN/CLOSE) button

t Disc tray

This is used to open and close the disc tray.

When it is pressed, the disc tray opens; when it

is pressed again, it closes.

This is where the CD to be played is placed.

! PHONES jack

y Display

The headphones are connected to this jack.

Use headphones that come with a standard

plug.

e ¡/¢(search forward/next track)

This shows the settings, play status, text

information, etc.

button

The same number of tracks as the number of

times the button is pressed are skipped in the

forward direction.When the button is held down,

tracks are searched (fast forward).

u 3(PLAY) button

! Remote sensor

This is used to start play.

This senses the infrared control signals sent

from the remote control unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

NAMES AND FUNCTIONS

DISPLAY

d f g

j k

¡ ¡¡ ¡

DISC

TTL

RNDM

TRK

PROG

–

RPT 1 PITCH

EDIT

PEAK

TTL

TIME

TEXT

10 11 12 13 14 15 16 17 18 19 20

a Main display

k TRK (track) indicator

¡ TTL (total time) indicator

This displays the time information and text

information of the disc played, the setting

menus, etc.

This lights above the display of the number of

the track being played, etc.

When the total remaining time or total program

time is displayed, this lights above that display.

l PROG (program) indicator

¡ TIME indicator

s TEXT indicator

This lights during program play.

This lights while the elapsed time or other such

time is displayed.

This lights when a disc supporting CD-TEXT

has been loaded.

¡ A-B (A-B repeat) indicator

¡ 1 - 20,

(music calendar)

This lights during A-B repeat play.

d 8(pause) indicator

This displays the track numbers recorded on

the disc, the track numbers still to be played,

and the track numbers programmed for program

play. (Audio CD only)

This lights when play is temporarily suspended.

¡ RPT (repeat) indicator

This lights up or flashes when the playback is

set to REPEAT.

f 3(play) indicator

This lights during play.

¡ 1 (1-track repeat) indicator

g DISC indicator

This lights during 1-track repeat play.

This flashes during readout of the table of

contents (TOC) information on the disc.

¡ PITCH (pitch control) indicator

Lights up when the pitch control function is set

and active.

h TTL (total track) indicator

This lights above the display of the total number

of tracks recorded on the disc.

¡ EDIT indicator

This lights during edit mode.

j RNDM (random) indicator

This lights during random play.

¡ PEAK indicator

This lights during peak search and playback of

the peak.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

NAMES AND FUNCTIONS

REMOTE CONTROLLER

z POWER button

, 5, ∞(volume) button

%, ﬁ(input) button

MUTE button

⁄ 3(play) button

This is used to switch the player’s power ON

and STANDBY. (page 10)

This is used to start play.

⁄ REPEAT button

These are used to operate the corresponding

functions of a Marantz integrated amplifier. For

details, refer to User Guide supplied with the

Integrated Amplifier.

x A-B (A-B repeat) button

This is used to play one track or all the tracks on

the disc repeatedly. (page 14, 27, 28)

This is used to set start point (A) and end point

(B) when a particular section is to be played

repeatedly. (page 14, 28)

⁄ PITCH -/RESET/+ (pitch control

. Q. REPLAY button

down/reset/up) buttons

c CANCEL button

Jump back a set time before the current playing

position and resume play. (page 15)

These are used to adjust the play speed (pitch)

with a ±12 step. (Audio CD only) (page 21)

These buttons are also used to select MP3/

WMA folders. (page 26)

This is used to cancel the programmed tracks.

(page 18, 19)

⁄ 8(pause) button

⁄

v RANDOM button

This is used to temporarily suspend play.

⁄ DISPLAY button

This is used to play the tracks in a random

sequence. (page 14, 28)

This is used to turn off the display (DISPLAY

OFF mode).(The display is turned off only

during play.)

⁄ 7(stop) button

This is used to stop the play.

b SCROLL/RECALL button

This is used to scroll the text display when text

is displayed.

When it is pressed during program play, it

is possible to check which tracks have been

programmed. (page 19)

⁄ MENU, ENTER button

¤ PROGRAM button

MENU button:

This button displays the various settings. (page

23)

⁄

This is pressed to initiate program play.

(page 16)

ENTER button:

Saves the current settings.

¤ AMS (auto music scan) button

⁄

n TEXT button

⁄

This is used to play the intros of all the tracks

in sequence starting from the first track for the

duration equivalent to the setting.

(page 15)

This is used to switch the main display from

the time display to the text display. (page 20,

25, 17)

⁄ Numeric buttons (0 to 9)

These are used to specify the numbers of the

tracks to be played.

m TIME button

¤ SOUND MODE button

⁄ 1, ¡(search) buttons

This switches the main display from the text

display to the time display.

It can also switch the time display during play.

(page 17)

This is used to switch Audio EX mode (page

24), and to set use of pitch control (page 21).

1 : This button is used to search backward

when it is held down during play.

⁄

¡ : This button is used to search forward

¤ 0OPEN/CLOSE button

CD:

when it is held down during play.

This is used to open and close the disc tray.

When it is pressed, the disc tray opens; when it

is pressed again, it closes.

It can display how much time has elapsed and

how much play time remains for the current

track as well as how much play time remains for

the whole disc.

⁄ 4, ¢(track skip) buttons

4 : Use this to return to the start of the track

now playing or return to the start of the

previous track.

MP3/WMA:

The elapsed time and time remaining for the file

can be displayed.

¢ : Use this to advance to the start of the

subsequent track.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

NAMES AND FUNCTIONS

REAR PANEL

AC IN

FLASHER IN

MODEL NOO. CD5003

ANALOG OUTPUT

DIGITAL AUDDIO OUT

REMOTE CONTROL

COAXIAL

OPTICAL

EXTERNAL

INTERNAL

OUT

e r

q ANALOG OUT (analog output)

r REMOTE CONTROL IN and OUT u Power cord connector socket

connectors

The music signals during play are output from

these connectors.

connectors

Use the supplied power cord to connect to a

standard household power supply outlet.

Using the supplied remote control connecting

cable, these connectors enable this player

to be connected to a Marantz component

equipped with remote control connectors.

These connections make it possible to control

an entire system that centers on the amplifier or

other such component.

Connect the player so that the power cord can

be removed easily as a precaution against

possible accidents.

w DIGITAL AUDIO OUT COAXIAL

(digital coaxial output) connector

The music signals during play are output

digitally from this coaxial output connector.

t EXTERNAL/INTERNAL switch

Note:

• Digital signals are not output at some

settings. For details, see “DIGITAL OUTPUT

OFF” and “AUDIO EX SELECTION” (page

24).

The switch is set to INTERNAL, when first

purchased, enabling the player’s built-in signal

reception window to be used.

Before using the supplied connecting cable to

make the connection between the player and

the remote control connectors on a Marantz

equipment, set the switch to EXTERNAL.

e DIGITAL AUDIO OUT OPTICAL

(digital optical output) connector

Note:

The music signals during play are output

digitally from this optical output connector.

Signals cannot be received from the remote

control unit if the switch is kept at EXTERNAL

when the player is to be used on its own.

Note:

• Digital signals are not output at some

settings. For details, see “DIGITAL OUTPUT

OFF” and “AUDIO EX SELECTION” (page

24).

y Flasher input connector

This is used to control this unit using a keypad

from another room.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

BASIC CONNECTIONS

This CD player is connected to an amplifier, CD recorder and other components for use. To ensure that the

components are connected properly, refer to the instruction manuals that come with the components to be

connected.

CONNECTING THE POWER SUPPLY

1. Plug the power cord into AC IN jack on the back panel.

Before connecting the components, be absolutely sure to turn off their power.

AC IN

CONNECTING TO AN AMPLIFIER

CD5003

Use the audio connecting cord to connect the player with a stereo amplifier or AV amplifier.

When making the connections, insert the plugs securely into the connectors. Failure to insert the plugs

securely may result in noise.

Note:

Do not connect the player to the PHONO input connectors on the amplifier.

AC IN

FLASHER IN

MODEL NO.. CD5003

ANALOG OUTPUT

DIGITAL AUDDIO OUT

COAXIAL OPTICAL

REMOTE CONTROL

EXTERNAL

INTERNAL

OUT

2. Turn on the power switch of the audio unit (amplifier, etc.) that is connected with this unit. Set the selector

on the connected unit to this unit.

(White)

(Red)

3. Plug the power cord into an AC outlet.

Audio connecting cord (supplied)

Signal ﬂow

(White)

(Red)

SPEAKER SYSTEMS

SYSTEM A

PHONO

GND

MODEL NO. PM5003

REMOTE

CONTROL

PHONO

TUNER

CD AUX/DVD RECORDER 1 RECORDER 2

(

)

(

)

CD-R

MD/TAPE

OUT

AC IN

IN OUT IN OUT

SYSTEM B

Ampliﬁer

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

BASIC OPERATIONS –AUDIO CD–

3. Press the 0button to retract the disc tray. Once 7

Stopping play

PLAYING CDS

PLAYING A SPECIFIC TRACK

the disc tray has been retracted, “TOC Reading”

appears on the display, after which the total

number of CD tracks and total playing time are

displayed. In the case of a disc that supports

CD-TEXT, the album title is displayed, and then

the total number of CD tracks and total playing

time are displayed.

CD PLAYER CD5003

Specifying the number of a track

to be played (direct search)

Select the number of the track to be played directly

by pressing the numeric buttons (0 to 9) on the

remote control unit.

To select track number 10 or above, use the numeric

buttons to select the higher digit first and then select

the lower digit.

Once the number of the track is selected, play will

start automatically.

MP3/WMA

STANDBY

DISPLAY

OFF

PHONES

LEVEL

PHONES

LEVEL

1 2, 3

2, 3

4. Press the 3 button on the player or remote

control unit to start play. Adjust the volume level

at the amplifier.

Press the 7 button on the player or remote control

unit during play.

Pausing play

Example:To play track 3

Removing the CD

Press the “3” numeric button.

PHONES

LEVEL

MP3/WM

DISPLAY

OFF

During play, press the 8 button on the player or

remote control unit to temporarily suspend play.

To resume play from the place where it was

temporarily suspended, press the 3 button or 8

button on the player or the 3button or 8button on

the remote control unit.

Example:To play track 12

After play has finished, press the 0 button on the

player or on the remote controller to extend the disc

tray, and remove the CD.

After the CD has been removed, press the 0button

again to retract the disc tray. The disc tray should

always be retracted when the player is not in use.

1. Press the POWER button on the player or on

Press the “1” numeric button.

the remote controller to turn on the power.

2. Press the 0 button on the player or on the

remote controller. Place the CD to be played in

the extended disc tray while ensuring that the

label with the printed text is facing up.

Within 1.5 second, press the “2” numeric button.

In the case of a single (8 cm) CD, align it with

the indentation in the center of the tray.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

BASIC OPERATIONS –AUDIO CD–

Playing a previous or subsequent

PLAYING A SPECIFIC PART

track (track skip)

OF A SPECIFIC TRACK

Advancing to a subsequent track

Searching a specific part of a

track (search)

While listening to a track being played, it is possible

to search a specific part of that track by a forward or

backward search.

MP3/WM

DISPLAY

OFF

Forward searching through the track now

playing

Press the ¡/¢ button on the player or ¢

button on the remote control unit for the number of

times equivalent to the number of tracks through

which play is to be advanced.

MP3/WM

DISPLAY

OFF

Returning to the start of the track now

playing or a previous track

The search (forward search) mode is established

by holding down the ¡/¢ button on the player

or ¡button on the remote control unit.

Holding down the button initiates a forward search.

MP3/WM

DISPLAY

OFF

Backward searching through the track now

playing

When the 4/1 button on the player or 4

button on the remote control unit is pressed, play

returns to the start of the track now playing. Play

returns to the previous track which is equivalent to

the number of times the button was pressed.

MP3/WM

DISPLAY

OFF

The search (backward search) mode is established

by holding down the 4/1button on the player or

1button on the remote control unit.

Holding down the button initiates a backward

search. (Returns during backward searches are

not constant.)

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED CONNECTIONS

CONNECTING TO A DIGITAL AUDIO COMPONENT

The player has one digital optical output connector and one digital coaxial output connector.

You can enjoy digital recording when the player is connected to a CD recorder or other digital recording component.

Connecting the optical output connector

Use an optical digital connecting cable available on the market. Insert the plug firmly in until it clicks into

Connecting the coaxial output connector

Use a coaxial digital connecting cable available on the market.

place. Do not bend or bundle the optical digital connecting cable.

AC IN

FLASHER IN

MODEL NO.. CD5003

MODEL NOO. CD5003

ANALOG OUTPUT

DIGITAL AUDIO OUT

COAXIAL OPTICAL

REMOTE CONTROL

ANALOG OUTPUT

DIGITAL AUDDIO OUT

COAXIAL OPTICAL

REMOTE CONTROL

EXTERNAL

INTERNAL

EXTERNAL

INTERNAL

OUT

Optical digital connecting cable

(available on market)

Coaxial digital connecting cable

(available on market)

Signal ﬂow

: Signal ﬂow

ANALOG INN/OUT

DIGITAL IN/OUT

OPTICAL

REMOTE

CONTROL

DIGITAL IN/OUT

COAXIAL OPTICAL

ANALOG IN/OUT

OUT

MD COMMON CD

MD/CD

EXTERNAL

INTERNAL

OUTPUT

INPUT

OUTPUT

INPUT OUTPUT

INPUT OUTPUT INPUT OUTPUT

CD recorder, MD deck, AV ampliﬁer, etc.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED CONNECTIONS

REMOTE CONTROL CONNECTION

FLASHER INPUT CONNECTOR

By using the remote control cord provided, connecting this player to additional Marantz audio equipment

enables the connected equipment to be remote controlled as a single audio system.

• This is used to control this unit using a keypad from another room. Set this switch to “EXT.”

• If a flasher input connector is to be used, do not use the remote control input connector.

• When connecting equipment incorporating a remote sensor, connect the “remote control out” connector

of the equipment to the “remote control in” jack of the CD player.

When doing this, set this player’s switch to “EXTERNAL.” This will stop its remote control IR receiver

from operating and the player can now be controlled via the remote control IR receiver of the attached

equipment.

FLASHER IN

• When using this CD player alone, set the switch to “INTERNAL.”

DIGITAL AUDDIO OUT

REMOTE CONTROL

AC IN

FLASHER IN

MODEL NO. CD5003

COAXIAL

OPTICAL

ANALOG OUTPUT

DIGITAL AUDDIO OUT

COAXIAL OPTICAL

REMOTE CONTROL

EXTERNAL

INTERNAL

EXTERNAL

INTERNAL

OUT

Set to “EXTERNAL.”

Remote connector cord (supplied)

: Signal ﬂow

SPEAKER SYSTEMS

SYSTEM A

PHONO

GND

MODEL NO. PM5003

REMOTE

CONTROL

PHONO

TUNER

CD AUX/DVD RECORDER 1 RECORDER 2

(

)

(

)

CD-R

MD/TAPE

OUT

AC IN

IN OUT IN OUT

SYSTEM B

Ampliﬁer

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED OPERATIONS –AUDIO CD–

The “A-” indicator on the display now lights.

Light up

Playing one track repeatedly

(1-track repeat)

RANDOM PLAY (PLAYING

TRACKS IN A RANDOM

SEQUENCE)

REPEAT PLAY (PLAYING THE

SAME TRACKS REPEATEDLY)

This function repeatedly plays one track only. Even

during random play or program play, it repeats the

track being played.

Press the REPEAT button on the remote control unit

twice while the track to be repeated is playing.

TTL

TRK

–

TIME

Playing all tracks repeatedly (all-

track repeat)

This function repeatedly plays all the tracks. Repeat

play is possible even during random play or program

play.

This function rearranges the tracks into a random

sequence and it then plays all the tracks in this

random sequence. If it is used together with repeat

play, the same tracks can be repeatedly played but

in a different sequence every time.

10 11 12 13 14 15 16 17 18

2. Press the A-B button on the remote control unit

at the end point of the part to be repeated.

Press the REPEAT button on the remote control

unit.

During play or stop, press the RANDOM button on

the remote control unit.

The “RPT” and “1” indicators light, and track now

playing is repeated.

The “A-B” indicator on the display now lights,

and the designated part (from point A to point

B) is played repeatedly.

Light up

TTL

TRK

RPT

TIME

The “RPT” indicator on the display lights, and the

repeat play of all the tracks starts.

The items on the music calendar appear on the

display one after the other, and the“RNDM”indicator

lights.

Light up

10 11 12 13 14 15 16 17 18

Light up

TTL

TRK

–

TIME

To stop 1-track repeat play and resume normal play,

press the REPEAT button on the remote control unit

to turn off the “RPT” indicator on the display.

Light up

TTL

TRK

RPT

TIME

10 11 12 13 14 15 16 17 18

RNDM

10 11 12 13 14 15 16 17 18

10 11 12 13 14

To stop all-track repeat play and resume normal

play, press the REPEAT button on the remote

control unit twice. The “RPT” indicator on the

display goes off.

To stop A-B repeat play and resume normal play,

press the A-B button on the remote control unit to

turn off the “A-B” indicator on the display.

Playing a speciﬁc part repeatedly

(A-B repeat)

Random play now starts.

Light up

This function repeatedly plays a specific part of a

track that you want to hear.

Note:

TTL

RNDM

TRK

TIME

The A-B repeat play function cannot be used

during random play.

1. During play, press the A-B button on the remote

control unit at the start point of the part to be

repeated.

10 11 12 13 14 15 16 17

To stop random play and resume normal play, press

the RANDOM button on the remote control unit.

The “RNDM” indicator on the display goes off.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED OPERATIONS –AUDIO CD–

Skipping tracks during random

How to set the Quick Replay time

WHILE PLAYING, REPLAY A

SMALL TRACK PORTION AND

LISTEN AGAIN (QUICK REPLAY)

AMS PLAY (SEARCHING

play to search other tracks

1. If there is a disc in the disc tray, remove the disc

FOR A SPECIFIC TRACK)

and close the tray.

When the ¡/¢ button on the player or ¢

button on the remote control unit is pressed during

random play, the next track is selected at random

and played.

All track intros, from the first track onward, are

played back in sequence, which is useful when

searching for a desired track.

2. Press the MENU button on the remote controller

once then the 7button four times.

The display will indicate “Quick Replay.”

You can choose whether to play 10, 20 or 30

seconds of each track.

Conversely, when the 4/1 button on the player

or 4 button on the remote control unit is pressed

during random play, play returns to the start of the

track now playing.

During stop or play, press the AMS (auto music

scan) button on the remote control unit.

If the Q.REPLAY button is pressed during playback,

the play position will jump back by the length of time

set in MENU, and then resume.

Note:

Jump back cannot go beyond the beginning of

the current track.

Press the AMS button repeatedly to switch through

the different scan modes.

When the Q.REPLAY button is pressed, if the

total length of the track being played is shorter

than the time set for quick replay, or if the track

elapsed playing time is shorter than the time set

for quick replay, the play position will return to the

beginning of the track and resume playing.

“

”, “

”... (

aborts the scan

function) light on the display, and the “3” indicator

flashes.

3. Press the ENTER button of the remote control.

Flashes

10 11 12 13 14 15 16 17 18

All track intros, from the first track onward, are played

back in sequence, for the amount of time they have

been preset (10 sec. when first purchased).

The currently time setting will be displayed

(at the time of purchase, this is set to 10

seconds).

Flashes

TTL

TRK

TIME

10 11 12 13 14 15 16 17 18

Once the track you want to hear has been found,

press the 3 button. The “3” indicator now lights,

and the track found and whatever comes after that

track will now be played normally.

When the RANDOM button on the remote control

unit is pressed during AMS play, the AMS play

function is released, and the random play mode is

established.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED OPERATIONS –AUDIO CD–

The PROG indicator flashes, and the program

mode is established.

4. Set the desired time with the 4or ¢buttons

4. Once all the tracks have been programmed,

press the 7 button on the player or remote

control unit or press the PROGRAM button on

the remote control unit.

PROGRAM PLAY

(PLAYING TRACKS IN THE

PREFERRED SEQUENCE)

(5 - 60 s).

Flashes

TTL

PROG

TTL

TIME

The order in which the CD tracks are played can

be rearranged into the sequence desired. Up to 30

tracks can be programmed.

TEXT

2. Press the numeric buttons on the remote

control unit the tracks can also be selected

using the 4 and ¢ buttons on the remote

control unit or 4/1and ¡/¢buttons on

the player. To select track number 10 or above,

use the numeric buttons to select the higher

digit first and then select the lower digit.

5. After setting the time, press the ENTER button. 7

Program play in the time display

mode

PHONES

LEVEL

The display will return to normal.

In the case of a CD-TEXT disc, first press the TIME

button on the remote control unit to set the main

display to the time display mode.

The PROG indicator stops flashing and lights

up instead, and the program is entered.

Light up

Note:

TTL

PROG

TTL

TIME

• If there is a period of more than 4 seconds during

this procedure in which a key is not pressed, the

setting at that time will be set, and the display will

return to displaying the time.

TEXT

TTL

TIME

TEXT

10 11 12 13 14 15 16 17 18

5. Press the 3 button on the player or remote

control unit. Play now starts in the programmed

sequence.

Display example: When track 2 has been

selected

1. During stop, press the PROGRAM button on the

Program play will start even when step 4 is

omitted.

remote control unit.

Flashes

TTL

TRK

PROG

TTL

TIME

TEXT

3. Repeat step 2 to program the desired tracks in

sequence. At each step of the programming,

the number of tracks programmed and their

total time appear on the main display. Up to 30

tracks can be programmed.

“Program” appears for an instant on the main

display.

Flashes

PROG

Flashes

TEXT

TTL

TRK

PROG

TTL

TIME

TEXT

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED OPERATIONS –AUDIO CD–

The PROG indicator stops flashing and lights

up instead, and the program is entered.

2. Press the 4 and ¢ buttons on the remote

Program play in the text display

mode

DELETE PROGRAM PLAY

(PLAY WITH UNDESIRED

TRACKS SKIPPED)

control unit or 4/1and ¡/¢buttons on

the player to select the track. (The track can

also be selected using the numeric buttons on

the remote control unit but in this case the title

is not displayed).

Light up

In the case of a CD-TEXT disc, tracks can be

selected by title for program play.

TTL

PROG

TTL

TIME

This function makes it possible to skip those tracks

that you do not want to hear during CD play. Up to

30 tracks can be deleted from the program.

If the main display is set to the time display mode,

press the TEXT button on the remote control unit to

establish the text display mode.

TEXT

5. Press the 3 button on the player or remote

control unit. Play of the selected tracks now

starts in the programmed sequence.

Delete program play in the time

display mode

MP3/WM

DISPLAY

OFF

In the case of a CD-TEXT disc, first press the TIME

button on the remote control unit to set the main

display to the time display mode.

Program play will start even when step 4 is

omitted.

The title of each selected track is scrolled, and

once it has been scrolled, it is programmed

automatically. If you do not want to program the

track, select another track before the scrolling is

completed.

Note:

Programming in the text display mode cannot

be performed for tracks which have no text

information for their titles.

TEXT

10 11 12 13 14 15 16 17 18 19

1. During stop, press the PROGRAM button on the

TTL

TIME

remote control unit.

TEXT

10 11 12 13 14 15 16 17 18 19

TEXT

10 11 12 13 14 15 16 17 18

3. Repeat step 2 to program the desired

tracks in sequence. Up to 30 tracks can be

programmed.

1. During stop, press the PROGRAM button on

the remote control unit, and then press the

CANCEL button.

4. Once all the tracks have been programmed,

press the 7 button on the player or remote

control unit or press the PROGRAM button on

the remote control unit.

“Program” appears for an instant on the main

display. Then the PROG indicator flashes, and

the program mode is established.

Flashes

PROG

“Delete Prog.” appears for an instant on the

main display.

TEXT

Flashes

PHONES

LEVEL

PROG

TEXT

10 11 12 13 14 15 16 17 18 19

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED OPERATIONS –AUDIO CD–

The total number of CD tracks and the total play

The total number of CD tracks and the total

playing time appear on the main display, the

PROG indicator flashes, and the delete program

mode is established.

3. Repeat step 2, and upon completion of the 7

Delete program play in the text

display mode

time appear on the main display, the PROG

indicator flashes, and the delete program mode

is established.

programming, press the 7 button on the player

or remote control unit or press the PROGRAM

button on the remote control unit.

In the case of a CD-TEXT disc, the tracks that

are not desired can be selected by title for delete

program play.

Flashes

TTL

PROG

TTL

TIME

TTL

PROG

TTL

TIME

If the main display is set to the time display mode,

press the TEXT button on the remote control unit to

establish the text display mode.

TEXT

10 11 12 13 14 15 16 17 18

TEXT

10 11 12 13 14 15 16 17 18 19

PHONES

LEVEL

2. Press the numeric buttons on the remote control

unit that you do not want to hear (the track can

also be selected using the 4and ¢buttons

on the remote control unit or 4/1 and

¡/¢buttons on the player).

2. Press the 4 and ¢ buttons on the remote

control unit or 4/1and ¡/¢buttons on

the player to select the track which you do not

want to hear. (The tracks can also be selected

using the numeric buttons on the remote

control unit but in this case the titles will not be

displayed.)

The PROG indicator in the display stops

flashing and lights up instead, and the delete

program is entered. Up to 30 tracks can be

deleted from the program.

TEXT

10 11 12 13 14 15 16 17 18 19

Light up

TTL

PROG

TTL

TIME

1. During stop, press the PROGRAM button on

the remote control unit, and then press the

CANCEL button.

MP3/WM

DISPLAY

OFF

TEXT

Display example: When track 2 has been

selected

4. Press the 3 button on the player or remote

control unit. The CD is now played but with the

deleted tracks skipped.

Flashes

The title of each selected track is scrolled,

and once it has been scrolled, it is deleted

automatically. If you do not want to delete the

track, select another track before the scrolling is

completed.

TTL

TRK

PROG

TTL

TIME

TEXT

10 11 12 13 14 15 16 17 18

“Delete Prog.” appears for an instant on the

main display.

Flashes

PROG

TEXT

10 11 12 13 14 15 16 17 18 19

TEXT

10 11 12 13 14 15 16 17 18 19

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED OPERATIONS –AUDIO CD–

Canceling the deletion of tracks which were

deleted for delete program play

3. Repeat step 2, and upon completion of the 7

programming, press the 7 button on the player

or remote control unit or press the PROGRAM

button on the remote control unit.

Checking the program or delete

program contents

When the SCROLL/RECALL button on the remote

control unit is pressed during delete programming,

the deleted tracks are displayed one after the other

in sequence.

MP3/WM

DISPLAY

OFF

Assoonasthetrackwhosedeletionistobecanceled

has appeared, press the CANCEL button on the

remote control unit immediately. The number of the

track whose deletion was canceled is displayed in

the music calendar on the display.

During programming operation or program play,

press the SCROLL/RECALL button on the remote

control unit.

Alternatively, a program can be canceled when the

disc tray is opened by pressing the 0button on the

player or on the remote controller.

PHONES

LEVEL

With program play, the programmed tracks are

displayed one after the other in sequence on the

main display.

With delete program play, the deleted tracks are

displayed one after the other in sequence on the

main display.

Adding tracks to the program

Precautions for program and

delete program play

The PROG indicator in the display stops

flashing and lights up instead, and the delete

program is entered. Up to 30 tracks can be

deleted from the program.

• When using the numeric buttons to select tracks

1 to 9 on a CD with 10 or more tracks in total,

allow 1.5 seconds or so to elapse after the button

corresponding to the number of the previous

track was pressed before pressing the button

corresponding to the number of the next track.

Changing the program or delete

program contents

Light up

Press the PROGRAM button on the remote control

unit during stop. The status of the PROG indicator

in the display changes from lighted to flashing, and

more tracks can be added to the program.

TTL

PROG

TTL

TIME

• When using the numeric buttons to select track

10 or up on a CD with 10 or more tracks in

total, press the button corresponding to lower

digit within 1.5 seconds or so after the button

corresponding to the higher digit was pressed.

TEXT

4. Press the 3 button on the player or remote

control unit. The CD is now played but with the

deleted tracks skipped.

Returning program play to

normal play (canceling the entire

program)

Deleting tracks which were programmed

for program play

• When using the 4 and ¢ buttons for

programming, keep pressing one of these

buttons with less than half a second or so in

between until the number of the desired track is

displayed.

Note:

Delete programming in the text display mode

cannot be performed for tracks which have no

text information for their titles.

When the SCROLL/RECALL button on the remote

control unit is pressed during programming, the

programmed tracks are displayed one after the

other in sequence.

As soon as the track to be deleted from the program

has appeared, press the CANCEL button on the

remote control unit immediately. The number of the

deleted track is cleared from the music calendar on

the display.

• If the total time for a program exceeds 99

minutes 59 seconds, the time display will appear

as “– – : – –”.

PHONES

LEVEL

Press the 7 button on the player or remote control

unit twice during program play or once during stop.

The PROG indicator on the display goes off, and the

entire program is canceled.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED OPERATIONS –AUDIO CD–

During play

In the stop mode

CD-TEXT

Each time theTEXT button on the remote control unit

is pressed, the information items are displayed in

the following sequence. During play, the information

of track now playing is mainly displayed.

Each time the TEXT button on the remote control

unit is pressed, the information items are displayed

in the following sequence. When the 3 button

is pressed while “-- Title” is displayed, the track

concerned starts playing.

The text information recorded on a CD-TEXT disc

can be viewed on this player.

In the case of a CD-TEXT CD, the display window

will light up as shown in the diagram below.

The maximum of characters that can be displayed

is 64.

Title of track xx now playing

Time display

Display of player

Album Title

TTL

TIME

Album Title

TEXT

10 11 12 13 14 15 16 17 18 19 20

This lights when the disc that has been read is

identiﬁed as supporting CD-TEXT.

xx Title (title of track xx)

xx Artist (artist of track xx)

xx Songwriter (songwriter of track xx)

xx Composer (composer of track xx)

xx Arranger (arranger of track xx)

Time display

Album Artist

When the TEXT button on the remote control is

pressed, the CD-TEXT information will be displayed

as outlined in the diagram on the right.

-- Title (title of track --)

However, the recorded information differs from

one disc to another so that not all the information

given below will necessarily be displayed. Items

not recorded are automatically omitted and skipped

by the player, and only the existing items are

displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED OPERATIONS –AUDIO CD–

3. When peak search of the last passage is

completed, play will be repeated for

approximately 6 seconds with the volume at a

comparatively high level. Adjust the record level

of the cassette deck. (Please see the instruction

manual for the cassette deck.)

Reducing the play speed

Press the PITCH- button on the remote control

PEAK SEARCH

(SEARCHING FOR THE

LOUDEST PASSAGE)

PITCH CONTROL

(CHANGING THE PLAY SPEED)

unit.

During stop, press the SOUND MODE button on

the remote controller several times until "Audio EX

OFF" appears on the display.

If the cassette deck recording level is adjusted in

relation to the peak level on the disc, it is possible

to avoid distortion and noise in recording. This

facility allows the peak over the entire disc or in

the programmed to be detected tracks before

proceeding to editing.

Light up

TTL

TRK

PEAK

TIME

“PITCH” will light up and each time the button is

pressed, the playback speed will decrease (min

-12).

TEXT

10 11 12 13 14 15 16 17 18 19 20

4. Press the 7 button on the player or remote

1. With the player at stop, press the MENU button

on the remote control once. “Peak” will be

displayed.

Light up

control unit to stop the peak search operation.

PITCH

Note:

As a CD may contain several peaks, a different

peak may be found every time the auto peak

level search operation is performed.

The play speed (pitch) can be changed across a

±12 step.

10 11 12 13 14 15 16 17 18

Note:

Returning play to the normal speed

Press the PITCH RESET button on the remote

Digital signals are not output during pitch control.

(Signals are output when the pitch control is set

to 0).

control unit.

Increasing the play speed

Press the PITCH+ button on the remote control

2. Press the ENTER button on the remote

control.

unit.

The “PITCH” indicator on the display goes off and

“Pitch: 0” appears on the main display.

If the PITCH RESET button on the remote control

unit is pressed again, play returns to the previous

speed setting.

“PITCH” will light up and each time the button is

pressed, the playback speed will increase (max

+12).

“PEAK” will light up and the peak search

operation will begin from the first passage on

the disc.

10 11 12 13 14 15 16 17 18

Light up

PITCH

TTL

TRK

PEAK

TIME

10 11 12 13 14 15 16 17 18

TEXT

10 11 12 13 14 15 16 17 18 19 20

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED OPERATIONS –AUDIO CD–

• Use of ¡and 1buttons

(Example: When a disc with 28 tracks is

loaded)

4. Press the ENTER button again and set the

EDITING (RECORDING A

DISC ON A TAPE)

editing contents.

Light up

When recording from a compact disc to a tape, use

this function to match the tape length to the playing

time of the tracks to be recorded and to create 4-

second intervals between the tracks.

TTL

TRK

–

EDIT

TTL

TIME

EDIT

TEXT

10 11 12 13 14 15

TEXT

10 11 12 13 14 15 16 17 18 19 20

Total playing time of side A

Flashes

Light up

Number indicators of tracks assigned to side A light up.

Simple edit

This operation fits tracks into a specified tape length

Each press of the ¡ button allows you to

increase the recording time by 1 minute.

Total number of tracks on side A

EDIT

while keeping the tracks in their original order.

5. Start playing in accordance with “Edit recording”

Each press of the 1button allows to decrease

the recording time by 1 minute.

13 14

(page 23).

1. During stop, press the MENU button on the

remote controller then the 7 button. “Edit”

appears.

Last track on tape side B

Last track on tape side A

• Using the numeric buttons

The tape recording time display (90) appears.

This example shows that, when the tape

recording time is 90 minutes, track 15 is the

last track on tape side A and track 28 the last

track on tape side B. In other words, by using a

90-minute tape, all of the 28 disc tracks can be

accommodated by assigning tracks 1 to 15 on

tape side A and tracks 16 to 28 on tape side B.

3. To change the tape recording time, specify the

new tape recording time using the ¢ or 4

button or the numeric buttons (0 to 9).

When numeric buttons are used to specify a

C-46 tape, for example, press 4 then 6.

The arrow mark will flash.

(indicates that tracks after 17 will not be played.)

• Use of ¢and 4buttons

EDIT

TEXT

10 11 12 13 14 15 16 17 18 19 20

2. Press the ENTER button on the remote

This display example shows that, with a 46-

minute tape, tracks 1 to 8 will be recorded onto

tape side A and tracks 9 to 16 will be recorded

onto tape side B.

control.

Each press of the ¢ button allows you to

change the recording time in the order 90 =46

=54 =60 =74 =90.

Each press of the 4 button allows you to

change the recording time in the order 90 =74

=60 =54 =46 =90.

The blinking arrow on the right end of the

character display shows that tracks 17 and after

cannot be recorded on the tape.

“EDIT” will light up, the player will enter edit

mode, and the tracks will be divided up into

SIDE A and SIDE B.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED OPERATIONS –AUDIO CD–

Program edit

This procedure allows you to record tracks in any

desired order while fitting the tracks into a specified

tape length.

Delete program edit

Edit recording

When recording from a disc to a tape, this procedure

allows you to omit the tracks you do not want to

record, while fitting the tracks into a specified tape

length.

– Recording to a cassette deck

1. After setting up, setup the cassette deck to rec

pause state.

1. Program tracks according to “PROGRAM

PLAY” (page 16).

1. Program tracks according to “DELETE

2. Press 3or 8buttons of the player to start A side

program. The player sends out signal to start

recording and starts playing A side program

after 4 seconds.

PROGRAM PLAY” (page 17).

2. The rest of the program edit procedure is

the same as step 1 to 4 in the simple edit

procedure.

2. The rest of the delete program edit procedure

is the same as step 1 to 4 in the simple edit

procedure.

Note:

• During a simple edit, program edit or delete

program edit, only STOP, OPEN/CLOSE or

POWER ON/STANDBY button operations can

be performed. (Remote-controlled operation is

not possible)

PHONES

LEVEL

This is intended to prevent mistakes in recording

due to erroneous operation.

• The display is always in the time display mode

during edit play. It is not possible to switch to the

text display mode.

3. After A side program complete, player turns

to the pause state at the beginning of B side

program.

4. Turn the cassette tape over and start

recording.

5. Press 3 or 8 buttons of the player manually to

start B side recording. Player sends out signal

to restart recording and starts playing B side

program after 4 seconds.

PHONES

LEVEL

6. After B side program complete, player stops

playing and clears edit program automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED OPERATIONS

DIGITAL OUTPUT OFF

AUDIO EX SELECTION

The following functions can be selected and set.

During stop, press the MENU button on the remote

controller. Press the 7 or 8 button on the remote

controller to select the desired item.

If digital output is not to be used, turn digital output

OFF, and you can enjoy higher-quality sound.

For higher-quality sound, select the Audio EX setting, referring the table below.

Audio EX changes as shown below each time the SOUND MODE button on the remote controller is pressed

during stop.

Setting digital output ON or OFF

Audio EX OFF

1. During stop, press the MENU button on the

remote controller once then the 7 button three

times. “Digital Out” appears.

Peak (page 21)

Audio EX 1

Audio EX 2

(When first

purchased)

Edit (page 22)

Sound mode

Audio EX OFF:

A digital signal is output only when Usable

the pitch control setting is 0.

Pitch control

Digital output

Display

Yes (*1)

MP3/WMA Mode (page 26)

(when the pitch

control setting is

Yes

Audio EX 1:

When first purchased.

Audio EX 1 offers better sound.

Digital Out (page 24)

Not usable

Yes (*1)

Audio EX 2:

Audio EX 2 offers best sound from Not usable

analog outputs.

No (during play)

(*2)

Quick Replay (page 15)

2. Press the ENTER button on the remote

controller.

(*1) Setting of Digital Out on the MENU (page 24) takes priority.

(*2) Pressing the DISPLAY button on the remote controller shows the display for three seconds.

The current settings appear on the display.

(At the factory, digital output is set to ON.)

3. Press the ¢/4 buttons to switch digital

output ON or OFF.

4. Press the ENTER button after making a

setting.

Normal display is resumed.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED OPERATIONS – MP3, WMA FILES –

¶Display while the player is stopped

Displaying text information

PLAYBACK ORDER OF MP3/WMA FILES

Each time the TEXT button on the remote control is

pressed, the display will change in the order shown

below. During playback, mainly information about

the file currently playing will be displayed.

¶Example of MP3/WMA playback order

AAAA01.mp3

Root directory

BBBB02.mp3

Album 01

Number of files that can be played

File Name (currently playing)

Song Title

• Thedottedlineswitharrowsindicatetheplayback

order of files and folders.

Album 02

Album 06

• If there are any MP3/WMA files located

immediately below the root directory, i.e. that

are not in folders, they will be played before the

folder files.

aaaa03.mp3

yyyy.jpg

aaaa04.mp3

zzzz.doc

aaaa05.mp3

aaaa06.mp3

• The playback order will depend on the folder

names and file names with the order of

precedence being: numbers → alphabet upper

case → alphabet lower case.

Album 03

Album 07

bbbb07.mp3

dddd11.wma

bbbb08.mp3

dddd12.wma

Artist Name

• Album 01 - Album 10

The CD-ROM example illustrated in the diagram

has 10 albums (folders); however, the files in

Album 05 and Album 06 are not MP3/WMA files,

so will not be played.

Album 04

Album Name

Year (created)

Comment

Album 08

cccc09.mp3

eeee13.mp3

cccc10.mp3

eeee14.mp3

• AAAA01.mp3 - gggg17.mp3

The CD-ROM in the example illustrated in the

diagram has 17 MP3/WMA files, the first to play

will be “AAAA01” and the last file to be played will

be “gggg17.”

Album 05

Album 09

wwww.wav

xxxx.wav

Album 10

• It is possible that the playback order will be

different than that of the order displayed on a

personal computer. This order can also change

according to the CD writing software used.

ffff15.mp3

gggg16.mp3

gggg17.mp3

Time Display

• Depending on the MP3 or WMA file being

played, information may not be displayed.

¶Playback order

1 AAAA01.mp3

• Items that have no recorded display information

will be skipped.

7 bbbb07.mp3

13 eeee13.mp3

2 BBBB02.mp3

3 aaaa03.mp3

4 aaaa04.mp3

5 aaaa05.mp3

6 aaaa06.mp3

8 bbbb08.mp3

9 cccc09.mp3

10 cccc10.mp3

11 dddd11.wma

12 dddd12.wma

14 eeee14.mp3

15 ffff15.mp3

• Only alphanumeric characters can be displayed.

• When a CD is not playing, only the number

of files on the disc that can be played will be

displayed.

16 gggg16.mp3

17 gggg17.mp3

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED OPERATIONS – MP3, WMA FILES –

Note:

PLAYING MP3/WMA FILES

MP3/WMA PLAYBACK

MODE SELECTION

There are certain playback functions, such as

program playback and pitch control, that cannot

be used when MP3 and WMA files are being

played back.

CD PLAYER CD5003

The playback mode for MP3/WMA files can be

selected.

MP3/WMA

STANDBY

POWER ^ON/STANDBY

DISPLAY

OFF

PHONES

LEVEL

Cont. mode: All playable files on the disc will be

played (When first purchased).

Folder mode: All playable files in a selected folder

will be played.

SELECTING THE FOLDER

TO LISTEN TO

1 1, 2

3. When the 4/1, ¡/¢ button on the CD

1. During stop, press the MENU button on the

remote controller once then the 7 button twice.

“MP3/WMA Mode” will be displayed.

1. While not playing, select the folder using the +

player or the 4, ¢ button on the remote

or - buttons on the remote control.

control is pressed, the display will switch.

The folder name will be displayed.

1. Press the POWER button on the player to turn

Press the remote control ENTER button to

select.

on the power.

2. Press the ENTER button on the remote

control. The first file name in the folder will be

displayed.

2. On closing the disc tray, after “TOC Reading”

has displayed, the number of files that can be

played will be displayed.

3. Press the 3 button on the player or remote

control unit to start play. Adjust the volume level

at the amplifier.

Pausing or stopping playback or CD removal

are carried out in the same way as with an Audio

CD. (page 10)

The process is cancelled if the STOP button on

the player, or the STOP or CANCEL button on

the remote control, is pressed.

Note:

2. Press the remote control ENTER button. The

¶Display during playback

Normal or random playback, AMS play will play

the files set by the MP3/WMA playback mode.

currently set mode will be displayed.

TRK

TIME

Folder number

File number currently playing

currently playing

¶Display while the player is stopped

The number of files that can be played

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED OPERATIONS – MP3, WMA FILES –

7 Repeatedly listen to the contents

PLAYING A SPECIFIC FILE

PLAYING A SPECIFIC PART

OF A SPECIFIC FILE

REPEAT PLAY (PLAYING THE

SAME FILES REPEATEDLY)

of one folder (Folder Repeat)

Advancing to a subsequent ﬁle

Repeatedly plays all the files in a folder.

Press the REPEAT button on the remote control

twice.

While listening to a file being played, it is possible

to search a specific part of that file by a forward or

backward search.

Playing all ﬁles repeatedly (all-ﬁle

repeat)

This function repeatedly plays all the files.

Forward searching through the ﬁle now

playing

MP3/WM

DISPLAY

OFF

Press the REPEAT button on the remote control

unit.

Press the ¡/¢ button on the player or ¢

button on the remote control unit for the number

of times equivalent to the number of files through

which play is to be advanced.

“RPT” will flash in the display window and all the

files in the folder will play repeatedly.

MP3/WM

DISPLAY

OFF

Flashing

TRK

RPT

TIME

The “RPT” indicator on the display lights, and the

repeat play of all the files starts.

Returning to the start of the ﬁle now playing

or a previous ﬁle

The search (forward search) mode is established

by holding down the ¡/¢ button on the player

or ¡button on the remote control unit.

Light up

To stop Folder Repeat and return to normal

playback, press the REPEAT button on the remote

control twice.

TRK

RPT

TIME

Holding down the button initiates a forward search.

The “RPT” indication will disappear from the display

window.

Backward searching through the ﬁle now

playing

To stop all-file repeat play and resume normal play,

press the REPEAT button on the remote control

unit third times. The “RPT” indicator on the display

goes off.

MP3/WM

DISPLAY

OFF

When the 4/1 button on the player or 4

button on the remote control unit is pressed, play

returns to the start of the file now playing. Play

returns to the previous file which is equivalent to the

number of times the button was pressed.

MP3/WM

DISPLAY

OFF

The search (backward search) mode is established

by holding down the 4/1button on the player or

1button on the remote control unit.

Holding down the button initiates a backward

search. (Returns during backward searches are

not constant.)

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED OPERATIONS – MP3, WMA FILES –

Playing one ﬁle repeatedly

(1-ﬁle repeat)

Playing a speciﬁc part repeatedly

(A-B repeat)

Skipping ﬁles during random play

to search other ﬁles

RANDOM PLAY (PLAYING

FILES IN A RANDOM

SEQUENCE)

This function repeatedly plays one file only.

Press the REPEAT button on the remote control unit

third times while the file to be repeated is playing.

This function repeatedly plays a specific part of a file

that you want to hear.

When the ¡/¢ button on the player or ¢

button on the remote control unit is pressed during

random play, the next file is selected at random and

played.

Conversely, when the 4/1 button on the player

or 4 button on the remote control unit is pressed

during random play, play returns to the start of the

file now playing.

This function rearranges the files into a random

sequence and it then plays all the files in this

random sequence. If it is used together with repeat

play, the same files can be repeatedly played but in

a different sequence every time.

1. During play, press the A-B button on the remote

control unit at the start point of the part to be

repeated.

During play or stop, press the RANDOM button on

the remote control unit.

Note:

The “RPT” and “1” indicators light, and file now

playing is repeated.

The selected files will be played in accordance

with the MP3/WMA playback mode (page 26).

The “A-” indicator on the display now lights.

Light up

TRK

RPT

TIME

TRK

–

TIME

The items on the music calendar appear on the

display one after the other, and the“RNDM”indicator

lights.

To stop 1-file repeat play and resume normal play,

press the REPEAT button on the remote control unit

to turn off the “RPT” indicator on the display.

2. Press the A-B button on the remote control unit

at the end point of the part to be repeated.

Light up

RNDM

Random play now starts.

Light up

The “A-B” indicator on the display now lights,

and the designated part (from point A to point

B) is played repeatedly.

RNDM

TRK

TIME

Light up

To stop random play and resume normal play, press

the RANDOM button on the remote control unit.

The “RNDM” indicator on the display goes off.

TRK

–

TIME

To stop A-B repeat play and resume normal play,

press the A-B button on the remote control unit to

turn off the “A-B” indicator on the display.

Note:

• The A-B repeat play function cannot be used

during random play.

• There are cases in which difficulties will be

experienced, when setting the B point, if the file’s

bit rate is low.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

ADVANCED OPERATIONS – MP3, WMA FILES –

Once the file you want to hear has been found,

AMS PLAY (SEARCHING

FOR A SPECIFIC FILE)

press the 3 button. The “3” indicator now lights,

and the file found and whatever comes after that file

will now be played normally.

When the RANDOM button on the remote control

unit is pressed during AMS play, the AMS play

function is released, and the random play mode is

established.

All track intros, from the first track onward, are

played back in sequence, which is useful when

searching for a desired track.

You can choose whether to play 10, 20 or 30

seconds of each file.

Note:

During stop or play, press the AMS (auto music

scan) button on the remote control unit.

The selected files will be played in accordance

with the MP3/WMA playback mode (page 26).

Press the AMS button repeatedly to switch through

the different scan modes.

“

”, “

”... (

aborts the scan

function) light on the display, and the “3” indicator

flashes.

Flashes

The intros of all the files starting from file 1 are

played in succession for the duration which has

been select. (10 sec. when first purchased)

Flashes

TRK

TIME

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

TROUBLESHOOTING

In a case of trouble, check the items below. Incorrect operations can sometimes be taken for trouble and

malfunctions. If the trouble persists even after the following points have been checked, consult your dealer

or nearest Marantz sales office or service center.

Symptoms

Causes

Action

The distance between the unit

and a remote controller is too

great.

Use the remote controller nearer the unit,

within the operational range. (page 4)

Symptoms

Causes

The power cable is not plugged Plug the power cable into an AC outlet.

in. (page 9)

The power to this unit is not Turn on the power to the unit.

Action

Some object is placed between

the unit and remote controller.

Remove the object. (page 4)

The remote controller The batteries in the remote Replace all the batteries with new ones.

cannot be operated.

controller are exhausted.

(page 4)

turned on.

(page 10)

The remote sensor of the unit is Avoid exposing the remote sensor to the

exposed to strong light.

Place the disc correctly.

(page 10)

strong light. (page 4)

The disc is not placed correctly.

The REMOTE CONTROL

switch on the rear panel is set to

EXTERNAL.

When the unit is to be used alone, set the

switch to INTERNAL. (page 13)

The disc is placed upside-down.

(The label of the disc is facing

down.)

Place the disc correctly.

(page 10)

A disc does not rotate.

The disc is placed upside-down. Place the disc correctly. (page 10)

Clean the recorded side of the disc. (page

33)

The recorded information is not

The disc is dirty.

A CD-R/CD-RW disc

cannot be played.

in a music (CD-DA) format. Or Record correct data appropriate for the

MP3/WMA files are not recorded unit. (page 32)

correctly.

A disc with many scratches may not be

playable. (page 33)

The disc is scratched.

The disc is warped.

A warped disc may not be playable.

(page 33)

Pitch control operation The unit is not set to Audio EX

cannot be performed.

Set the unit to Audio EX OFF. (page 24)

OFF.

An amplifier or speakers are not Connect the cables correctly. (Refer to

Digital output is set to OFF.

Set digital output to ON. (page 24)

connected correctly.

User Guide supplied with the amplifier.)

Digital signals are not Audio EX is set to Audio EX2.

output.

Set Audio EX to Audio EX1. (page 24)

Turn on the power to the amplifier.

(Refer to User Guide supplied with the

amplifier.)

Audio EX is set to Audio EX OFF, Set the pitch control setting to O. (page 21)

The power to the amplifier is not

turned on.

and the pitch control is used.

Or set Audio EX to Audio EX1. (page 24)

Set the function or the selector switch of

The function or the selector the amplifier to “CD” or “AUX” (as per your

switch of the amplifier is not set to connection setup).

The disc rotates, but there

is no sound output.

“CD” or “AUX” (according to your (Refer to User Guide supplied with the

current connection setup).

amplifier.)

The volume of the amplifier is set Adjust the volume of the amplifier. (Refer to

to minimum.

User Guide supplied with the amplifier.)

Clean the recorded side of the disc. (page

33)

The disc is dirty.

A disc with many scratches may not be

playable. (page 33)

The disc is scratched.

The disc is warped.

The disc stops rotating.

A warped disc may not be playable. (page

33)

The disc to be played is not a

music CD. Or MP3/WMA files are

not recorded on the disc.

A CD-ROM for a computer cannot be

played. (page 32)

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

OTHERS

Speciﬁcations

Dimensions (unit: inch (mm))

Audio characteristics

Channels ......................................................................................................................................2 channels

Frequency response...............................................................................................................2 Hz to 20 kHz

Dynamic range ...................................................................................................................................100 dB

Signal-to-noise ratio............................................................................................................................110 dB

Channel separation ............................................................................................................... 110 dB (1 kHz)

Harmonic distortion .............................................................................................................. 0.002% (1 kHz)

Wow & flutter ................................................................................................................... Precision of quartz

Audio output .....................................................................................................................2.25 V rms, stereo

Headphone output................................................................................ 18 mW/32 ohms (variable maximum)

Digital output

Coaxial output (pin jack).............................................................................................0.5 Vp-p, 75 ohms

Optical output (square optical connector) ..................................................................................-19 dBm

Optical readout system

Laser..........................................................................................................................AlGaAs semiconductor

Wavelength........................................................................................................................................ 780 nm

Signal system

Sampling frequency.........................................................................................................................44.1 kHz

Quantization ...................................................................................................................... 16-bit linear PCM

Power supply

U version ..............................................................................................................................AC 120 V 60 Hz

Power consumption ...............................................................................................................................14 W

Standby power consumption ................................................................................................................0.4 W

17-3/8 (440)

CD PLAYER CD5003

Cabinet, etc.

Accessories

MP3/WMA

STANDBY

DISPLAY

OFF

POWER ^ON/STANDBY

PHONES

LEVEL

Remote controller.................................................................................................................................. 1

AAA batteries........................................................................................................................................ 2

AC power cord....................................................................................................................................... 1

Audio connecting cord........................................................................................................................... 1

Remote control connecting cord ........................................................................................................... 1

Maximum outer dimensions

Width.................................................................................................................... 17-3/8 inchs (440mm)

Height.................................................................................................................. 4-1/8 inchs (104.5mm)

Depth................................................................................................................. 13-3/8 inchs (339.5mm)

Weight .................................................................................................................................................. 5.1kg

Allowable operating temperature................................................................................................+5 to +35°C

Allowable operating humidity............................................................................. 5 to 90% (no condensation)

CLASS 1 LASER PRODUCT

LUOKAN

LASERLAITE

KLASS 1 LASERAPPARAT

This player’s specifications and exterior are subject to change without notice for improvements.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

OTHERS

• The text information, such as ID3 tag information

and file names that are displayed during

playback of MP3s, support English alphanumeric

characters only.

Playing CD-R/CD-RW discs

Playing MP3 or WMA ﬁles

This CD player can be used to play CD-R or CD-RW

discs on which MP3 (MPEG Audio Layer-3) or WMA

(Windows Media Audio) format audio files have

been recorded.

• When playing variable bit rate files, it is possible

that the playing time may not be displayed

accurately.

This unit can play back the CD-RW (ReWritable)

discs as well as ordinary Audio CD and CD-R

(Recordable) discs.

Support for MP3 ID3 tags enables display of ID3

information, such as artist names, album titles,

track titles and the like, if this information has been

recorded with the tracks.

• When writing onto CD-R or CD-RW discs,

please use either ISO9660 mode 1 or ISO9660

mode 2-disc format. Multi-session recording is

also supported enabling the playing of data that

have been added to a disc.

• This unit can play back Audio CD format and CD-

R/CD-RW discs which contain MP3 music data.

However, some discs may have problems such

as unable to play, noise or sound distortion.

* For details, please read the instruction manual

provided with a CD recorder.

• MP3/WMA files that have been recorded by

“packet writing” cannot be played back.

• Windows Media and the Windows Logo are the

registered trademark and trademark of Microsoft

Corporation in the United States and other

countries.

• The CD-R and CD-RW discs should contain

properly-recorded TOC information so that they

can be played back. In CD recorders, the task of

writingTOC information is referred to as finalizing

the disc. Discs that are not finalized cannot be

properly recognized as an Audio CD and played

back by regular CD players and Super Audio CD

players. For details, please read the instruction

manual provided with a CD recorder.

• Depending on the condition of the recorded data,

it may take some time to read song information.

• In the case of an Enhanced or Mixed Mode CD

having combined audio format CD-DA along with

MP3/WMA files, only the CD-DA audio portion

will be played.

• Music that you have recorded that is subject

to copyright laws is for personal use only, and

cannot be used otherwise without the permission

of the copyright holder.

• The playback of WMA DRM (Digital Rights

Management) files is not supported by this

player.

Caution:

* TOC stands for Table Of Contents and contains

information such as the total number of tracks

and total playing time of the disc.

• The sound file specification supported by this

CD player is “MPEG-1 Audio Layer-3” (sampling

frequency fs 32 kHz, 44.1 kHz, 48 kHz). Other

specifications, such as MPEG-2 Audio Layer-3,

MPEG-2.5 Audio Layer-3, MP1 or MP2 are not

supported.

• This player can only be used to play Audio CD-

DA format discs or discs on which MP3 or WMA

audio data have been recorded. Do not attempt

to play a disc containing other data, such as a

CD-ROM for PCs, on this unit.

• Generally the higher the bit rate, the higher the

sound quality.

• As the playback of a CD-RW disc necessitates

partial change of the player setup, it may take

longer time for reading the TOC information than

when an Audio CD or CD-R disc is played.

MP3 bit rates are between 32 - 320 kb/s and for

WMA between 64 - 160 kb/s. It is recommended

that MP3/WMA recordings with a bit rate of at

least 128 kb/s be used.

• Ensure that MP3/WMA files have the extension

“.mp3” or “.wma.” Files with other file extensions

or without any extension at all cannot be played

on this player.

• Playlists are not supported.

• The maximum number of files supported on a

single disc is 255 and the maximum number of

folders is also 255.

• File and folder names up to a length of 32

characters can be displayed.

• This player supports MP3 ID3 tags.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

OTHERS

* Do not use discs which come in special

shapes.

Notes about the discs

About playing copy-controlled

CDs

On playing a DualDisc

* Handle the discs carefully so as not to

scratch their surfaces.

• On one side of a “DualDisc”, video and audio

signals conforming to DVD standards and on the

other side audio signals to be played on a CD

player are recorded.

Do not attempt to play heart-shaped or octagonal

discs or discs with any other special shapes. You

may find that you cannot remove them or that

some other kind of malfunctioning may occur in

the player.

Some copy-controlled CDs may not conform to

official CD standards. They are special discs and

may not play on the unit.

* Keep the surfaces of the discs clean at all

times.

• Signals recorded on the side for audio signals

only (the CD side) are not in conformity with the

general physical CD standards and may not be

playable on this player.

When cleaning the surfaces of discs, always

be sure to use the special cleaner and wipe the

surfaces in the directions shown in the figure

below.

• For details on the specifications and standards

of a “DualDisc”, refer to a dealer or distributor of

the disc.

* Use discs which satisfy the CD standards

such as those with the “CD logo”, “

” mark on their disc label surfaces.

” or

“

TEXT

No guarantees are made for playback if discs

which do not satisfy the appropriate CD

standards are used.

• Wipe the surface

radially from the

center.

• Do not wipe the

s u r fa c e i n t h e

c i r c u m fe r e n t i a l

direction.

Similarly, no guarantees are made for their

sound quality even if it is possible to play such

discs.

* Do not attach pieces of paper or stickers to

the label surfaces of the discs.

* To protect your discs from damage, avoid

placing them in the following locations.

When a disc has a piece of plastic tape or rental

CD label with paste protruding from the edge or

when a disc still bears traces of sticky tape or

adhesive labels, do not attempt to play it. If such

a disc is played on the CD player, you may find

that you cannot remove it or that some other kind

of malfunctioning may occur.

• Where they will be exposed to direct sunlight

or where they will be close to a heater or other

heat-radiating appliance

• Where the humidity level is high or it is very

dusty

• Near a window or other such location where

they may be exposed to rain

* Get into the habit of putting the discs back in

their cases after use.

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

OTHERS

The section describes the care and maintenance

tasks that must be performed to optimize the

operation of your Marantz equipment.

Repairs

Only the most competent and qualified service

technicians should be allowed to service the

factory-trained warranty station personnel have

the knowledge and special facilities needed for

repair and calibration of this precision equipment.

After the warranty period has expired, repairs will

be performed for a charge if the equipment can be

returned to normal operation.

Cleaning of equipment external

surfaces

The exterior finish of your unit will last indefinitely

with proper care and cleaning, Never use scouring

pads, steel wool, scourging powders or harsh

chemical agents (e.g., lye solution), alcohol, thinner,

benzine, insecticide or other volatile substances as

these wil mar the finish of the equipment. Likewise,

never use cloths containing chemical substances. If

the equipment get dirty, wipe the external surfaces

with a soft, lint-free cloth.

In the event of difficulty, refer to your dealer or write

directly to the nearest location to you that is listed

on the Marantz Authorized Service Station list. If

writing, please include the model and serial number

of the equipment together with a full description of

what you think is abnormal about the equipment’s

behaviour.

If the equipment becomes heavily soiled:

• dilute some washing up liquid in water, in a ratio

of one part detergent to six parts water.

• dip a soft, lint free in the solution and wring the it

is damp.

• wipe the equipment with the damp cloth.

• dry the equipment by wiping it with a dry cloth.

Using headphones

If the volume in the headphones is too high, it may

injure your ears. Do not set the sound volume too

high.

Download from Www.Somanuals.com. All Manuals Search And Download.

www.marantz.com

You can find your nearest authorized distributor or dealer on our website.

is a registered trademark.

Printed in China

06/2008 541110125024M mzh-d

Download from Www.Somanuals.com. All Manuals Search And Download.

Land Pride Brush Cutter RCS3510 User Manual
Lenmar Enterprises Battery Charger SoloXP User Manual
LevelOne Switch GSW 2476 User Manual
Lightolier Indoor Furnishings 1104F13ES User Manual
Linksys Network Card PAP2T User Manual
Makita Drill 6013BR User Manual
Marantz Microcassette Recorder PMD661 User Manual
Maytag Washer Dryer MDC1305AAW User Manual
Melissa Microwave Oven 653 066 User Manual
Meyer Sound Speaker MJF 212A User Manual