BD5004
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL FRANÇAIS ENGLISH
ⅥNote on use / Observations relatives a l’utilisation / Notas sobre el uso
CLASS 1
LASER PRODUCT
ⅥCopyrights / Droits d’auteur / Derechos de Autor
• It is prohibited by law to reproduce, broadcast, rent or play discs
in public without the consent of the copyright holder.
• La reproduction, la diffusion, la location, le prêt ou la lecture
publique de ces disques sont interdits sans le consentement du
détenteur des droits d’auteur.
• De acuerdo con las leyes está prohibido reproducir, emitir,
alquilar o interpretar discos en público sin la autorización del
propietario de los derechos de autor.
•
•
•
Keep the apparatus free from moisture, water, and
dust.
Protéger l’appareil contre l’humidité, l’eau et
lapoussière.
Mantenga el equipo libre de humedad, agua y
polvo.
•
•
•
Do not let foreign objects into the apparatus.
Ne pas laisser des objets étrangers dans l’appareil.
No deje objetos extraños dentro del equipo.
•
•
•
Avoid high temperatures.
Allow for sufficient heat dispersion when installed
in a rack.
Eviter des températures élevées
Tenir compte d’une dispersion de chaleur suffisante
lors de l’installation sur une étagère.
Evite altas temperaturas
Permite la suficiente dispersión del calor cuando
está instalado en la consola.
•
•
Unplug the power cord when not using the
apparatus for long periods of time.
Débrancher le cordon d’alimentation lorsque
l’appareil n’est pas utilisé pendant de longues
périodes.
•
•
•
Do not let insecticides, benzene, and thinner come
in contact with the apparatus.
Ne pas mettre en contact des insecticides, du
benzène et un diluant avec l’appareil.
No permita el contacto de insecticidas, gasolina y
diluyentes con el equipo.
•
Desconecte el cordón de energía cuando no utilice
el equipo por mucho tiempo.
•
•
•
Handle the power cord carefully.
Hold the plug when unplugging the cord.
Manipuler le cordon d’alimentation avec précaution.
Tenir la prise lors du débranchement du cordon.
Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el cordón
de energía.
* (For apparatuses with ventilation holes)
•
Never disassemble or modify the apparatus in any
way.
•
•
•
Do not obstruct the ventilation holes.
Ne pas obstruer les trous d’aération.
No obstruya los orificios de ventilación.
•
•
Ne jamais démonter ou modifier l’appareil d’une
manière ou d’une autre.
Nunca desarme o modifique el equipo de ninguna
manera.
II
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Contents
Virtual Surround ................................................................................... 25
Pure Direct Mode ................................................................................. 25
Playing Back an Audio CD or a Disc with DivX®/MP3/
Kodak Picture CD ................................................................................. 28
Introduction
Cleaning Discs ......................................................................................... 3
Unplayable Discs .................................................................................... 5
Color Systems .......................................................................................... 5
Region Codes ........................................................................................... 5
Loading the Batteries ............................................................................ 6
Front Panel ............................................................................................... 7
Rear Panel ................................................................................................. 7
Remote Control ....................................................................................... 8
Front Panel Display ................................................................................ 9
Adjusting the Brightness of the Display ........................................ 9
Examples of Displays during Operation .......................................10
Connecting to a TV ...............................................................................12
Connecting to a Display Device and an Amplifier/
HDMI Output Mode and Actual Output Signals ........................13
Audio Setting .........................................................................................13
Decoder .................................................................................................14
Audio Inputs ........................................................................................15
Connection Test ................................................................................... 39
Enable(Easy) ........................................................................................... 39
Enable(Custom) .................................................................................... 39
Disable ..................................................................................................... 41
A-B Repeat ...............................................................................................20
Random Playback .................................................................. 21
Zoom ....................................................................................... 21
Camera Angle ......................................................................... 22
Search ..................................................................................... 22
On-Screen Display .................................................................. 23
Index ........................................................................................46
Troubleshooting .....................................................................47
Language Code .......................................................................48
Specifications ..........................................................................49
1
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
• Noise or disturbance tends to occur particularly when using
indoor antennas or 300Ω/ohms feeder wires. We recommend
using outdoor antennas and 75Ω/ohms coaxial cables.
Important
Dew Warning
Moisture condensation may occur inside the unit when it is
moved from a cold place to a warm place, or after heating a cold
room or under conditions of high humidity. Do not use the unit at
least for 2 hours until its inside is dry.
Use only discs marked with logos listed on page 4.
Power Supply
Note
• For heat dispersal, do not install this equipment in a
confined space such as a book case or similar unit.
The main power supply is engaged when the main plug is
plugged in a 120V, 60Hz AC outlet. To operate the unit, press
[POWER ON] or <POWER ON/STANDBY> to turn on the unit.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the AC cord with wet hands.
• Do not pull on the AC cord when disconnecting it from AC wall
outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug the AC cord
immediately and take the unit to our authorized service center
for servicing.
Warning
To avoid fire or electric shock, do not expose this unit to rain or
moisture.
10 cm or more
WARNING:
LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.
Before Using
Pay attention to the following before using this unit:
●Moving the unit.
Installation Location
For safety and optimum performance of this unit:
To prevent short-circuits or damaged wires in the connection
cables, always unplug the power supply cord and disconnect the
connection cables between all other audio components when
moving the unit.
• Do not stand the unit up vertically. Install the unit in a horizontal
and stable position. Do not place anything directly on top of the
unit. Do not place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from sources of
intense heat. Avoid dusty or humid places. Avoid places with
insufficient ventilation for proper heat dissipation. Do not block
the ventilation holes on the sides of the unit. Avoid locations
subject to strong vibration or strong magnetic fields.
• Be sure to remove a disc and unplug the AC cord from the outlet
before carrying the unit.
●Store the user guide in a safe place.
After reading the user guide, store it in a safe place as it could
come in handy in the future.
●Whenever <POWER ON/STANDBY> is in the STANDBY state,
the unit is still connected to AC line voltage.
Please be sure to unplug the cord when you leave home for, say,
a vacation.
Wall
Cautions on Handling
●Cautions on using mobile phones.
Using a mobile phone near this unit may result in noise. If so,
move the mobile phone away from this unit when it is in use.
●Before turning the power operation button on.
Check once again that all connections are correct and that there
are no problems with the connection cables. Always set the
power operation button to the standby position before
connecting and disconnecting connection cables.
●Sufficiently ventilate the place of installation.
If the unit is left in a room full of the smoke from cigarettes, etc.,
for long periods of time, the surface of the optical pickup could
get dirty, in which case it will not be able to read the signals
properly.
●Note that the illustrations in these instructions may differ
from the actual unit for explanation purposes.
Non-use periods - Turn off the unit when it is not in use. Unplug
the unit from the household AC outlet if it is not to be used for a
long time. Unplug the unit during lightning storms.
About Copyright
Unauthorized copying, broadcasting, public performance and
lending of discs are prohibited.
This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is prohibited.
Please read this user guide carefully before using the unit, and
keep it for future reference.
Cautions on Installation
Noise or disturbance of the picture may be generated if this unit or
any other electronic equipment using microprocessors is used
near a tuner or TV.
If this happens, take the following steps:
U. S. Patent No’s, 6,836,549; 6,381,747; 7,050,698;
6,516,132 and 5,583,936.
• Install this unit as far as possible from the tuner or TV.
• Set the antenna wires from the tuner or TV away from this unit’s
AC cord and input/output connection cords.
2
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
Introduction
●BD-Live
Features
About Discs
BD-Live (BD-ROM version 2 Profile 2.0) that allows interactive
functions to be used when this unit is connected to the Internet
in addition to the BONUSVIEW function. The various functions
differ depending on the disc.
●PIP (Picture in Picture) (BONUSVIEW) Setting
Some BD-Video have the PIP (picture-in-picture) function which
enables you to display the secondary video in the primary video.
You can call up the secondary video by pressing [MODE]
whenever the scene contains the secondary video.
●Pure Direct
The sound quality of analog audio output is improved by stop
output of video signals, etc.
●On-Screen Display
Information about the current operation can be displayed on a
screen, allowing you to confirm the currently active functions
(such as program playback) using the remote control.
●Picture Control
●DRC (Dynamic Range Control)
Use this procedure to set the dynamic range of the output
signals when playing back BD/DVD/AVCHD recorded in Dolby
Digital/Dolby Digital Plus/Dolby TrueHD.
Disc Handling
• Handle the discs so that fingerprints and dust do not adhere to
the surfaces of the discs.
• Always store the disc in its protective case when it is not used.
• Note that discs with special shapes cannot be played on this
product. Do not attempt to play back such discs, as they may
damage the unit.
●x.v.Color
This unit supports playback of video contents on discs recorded
with “x.v.Color” technology. To watch this video content with the
“x.v.Color” space, a TV or other display device supporting both
video image reproduction using “x.v.Color” standard and
capability of manual switching of its color space setting is
required. Please refer to the user guide of your display device for
further information.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe
the disc from the center to out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analog records.
Supplied Accessories
Please check to make sure the following items are included with
the main unit in the carton.
remote control (RC004BD)
AC cord (5.2ft/1.6m)
warranty card
“AA” (R6) batteries x2
●Playing Back the Contents in SD Memory Card
• You can playback AVCHD, MP3, Windows Media™ Audio, or
JPEG stored in an SD Memory Card.
Memory Card and playback with the BD-ROM.
user guide
●Playing Back AVCHD Files
This unit supports playback of AVCHD format files (new format
for high definition video camcorders) recorded on disc/SD card.
Your high definition personal archive is playable in HD quality.
●Playing Back DivX® File
You can enjoy DivX® files which are recorded on BD-RE/-R,
DVD-RW/-R or CD-RW/-R.
RCA audio cable (3.2ft/1.0m)
• Official DivX® Certified product
• Plays all versions of DivX® video (including DivX® 6/DivX® HD)
with standard playback of DivX® media files.
●Playing Back an MP3 File
You can enjoy MP3 files which are recorded on BD-RE/-R,
DVD-RW/-R, CD-RW/-R or SD Memory Card.
●Playing Back Windows Media™ Audio File
You can enjoy Windows Media™ Audio files which are recorded
on BD-RE/-R, DVD-RW/-R, CD-RW/-R or SD Memory Card.
●Displaying a JPEG picture
Kodak Picture CD can be played back. Still images stored in JPEG
format on BD-RE/-R, DVD-RW/-R, CD-RW/-R or SD Memory Card
can also be played back.
RCA video cable (3.2ft/1.0m)
●BD-J Application
• With some BD that supports Java applications (BD-J), you can
enjoy interactive function (e.g. game).
3
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
Introduction
Playable files
Logos
Media
Readable cards
Playable files / data
Playable Discs and Files
DVD-RW/-R
SD Memory Card (8MB - 2GB) AVCHD, MP3, Windows Media™
This unit is compatible to play back the following discs.
To play back a BD or DVD, make sure that it meets the
requirements for region codes and color systems as described on
page 5. You can play back discs that have the following logos on
the disc. Other disc types are not guaranteed to play back.
SD Memory Card
(including SDHC)
miniSD Card
Audio, JPEG, Picture-in-picture
SDHC Memory Card (4GB - 8GB)
miniSD Card (8MB - 2GB)
AVCHD
commentary, subtitles or other
extras for BD-ROM ver. 2 (Profile
microSD Card
microSD Card (8MB - 2GB)
2.0/ Profile 1.1)
Playable discs
Blu-ray Disc
Logos
BD-RE/-R
DVD-RW/-R
CD-RW/-R
Note for SD Memory Cards
DivX®
MP3
- BD-Video
• Do not remove the SD Memory Card or turn the unit to the
standby mode while the contents of the card is in playback. It
may result in malfunction or loss of the card’s data.
• Please keep the SD Memory Cards in their cases when you are
not using them.
- BD-RE (ver.2.1)
(Recorded in BDMV format)
- BD-R (ver.1.1/1.2/1.3)
(Recorded in BDMV format)
(Unclosed discs may not be played back.)
—
—
BD-RE/-R
DVD-RW/-R
• Do not try to open or modify the card.
CD-RW/-R
Windows Media™
Audio
• Do not touch the terminal surface with your fingers or any
SD Memory Card
(including SDHC)
miniSD Card
microSD Card
DVD-Video
metals.
• Do not attach additional labels or stickers to cards.
• Do not remove the label of the SD Memory Cards.
• This unit supports SD Memory Card with FAT12/FAT16 file
system, and SDHC Memory Card with FAT32 file system.
• This unit may not read the SD Memory Cards formatted on
computer. If that is the case, please reformat the SD Memory
Cards on this unit and try again.
JPEG
DVD-RW
(Finalized discs only)
(Finalized discs only)
Note
DVD-R
DVD-R DL
• ABOUT DIVX VIDEO: DivX® is a digital video format created by
DivX, Inc. This is an official Divx Certified device that plays
software tools to convert your files into DivX video.
• This unit does not support mini SDHC and micro SDHC
Memory Card.
CD-DA (audio CD)
CD-RW
• For miniSD Card and microSD Card adapter is necessary.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device
must be registered in order to play DivX Video-on-Demand
(VOD) content. To generate the registration code, locate the
DivX VOD section in the device setup menu. Go to
miniSD Card
microSD Card
Adapter
Adapter
miniSD Card
microSD Card
vod.divx.com with this code to complete the registration
process and learn more about DivX VOD.
CD-R
• Discs containing the DivX® files with the DivX® GMC (Global
Motion Compensation) playback feature, which is DivX®
supplemental function, cannot be played back on this unit.
• Portions of this product are protected under copyright law
and are provided under license by ARIS/SOLANA/4C.
Kodak Picture CD
• This unit cannot play back the disc contents protected by
Windows Media™ Digital Rights Management (DRM).
• “WMA” (Windows Media™ Audio) is an audio codec
developed by Microsoft® in the United States of America.
—
DTS-CD (5.1 Music Disc)
4
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
Introduction
Unplayable Discs
Region Codes
Symbols Used in this User Guide
BD-Video
The following discs will not play back on this unit.
• BD-RE (ver.1.0) (BD-disc with cartridge)
• BD-RE (ver.2.1) (Recorded in BDAV format)
• BD-R (ver.1.1/1.2/1.3) (Recorded in BDAV format)
This unit has been designed to play back BD with
region A and DVD-Video with region 1. You cannot
play back BD or DVD-Video that are labeled for other
regions. Look for the symbols on the right on your BD
or DVD-Video. If these region symbols do not appear
on your BD or DVD-Video, you cannot play back the
disc in this unit. The letter or number inside the
globe refers to region of the world. A BD or
To specify for which media type each function is, we put the
following symbols at the beginning of each item to operate.
Symbol
Description
Description refers to BD-Video and BD-RE (ver. 2.1)/
BD-R (ver.1.1/1.2/1.3) recorded in BDMV format
DVD-Video
BD-V
• Multi-session burn BD/DVD with DivX® files
Description refers to DVD-Video and DVD-RW/-R
recorded in video mode
• Multi-session burn BD-RE/-R with MP3/Windows Media™ Audio/
JPEG files
• BD/DVD hybrid disc (e.g. Total Hi Def hybrid disc)
• BD-Video that does not include “A” on its region code.
DVD-V
DVD-Video labeled for a specific region can only play
back on the unit with the same region code.
Description refers to DVD-RW/-R recorded in VR mode
Description refers to audio CD and DTS-CD
DVD-VR
CD
• DVD-Video that does not include either “1” nor “ALL” on its
region code.
Description refers to DVD-RW/-R and SD Card with
AVCHD files
5.x and 6.x can be played)
AVCHD
Structure of Disc/SD Memory Card Contents
Description refers to BD-RE/-R, DVD-RW/-R and
CD-RW/-R with DivX® files
The contents of disc are generally divided into titles. Titles may be
further subdivided into chapters.
• DVD-RW/-R recorded in non-compatible recording format
• CD-ROM (Data files in DivX® 3.11, 4.x, 5.x and 6.x can be played)
• CDV (Only the audio part can be played)
• CD-G (Only the audio signals can be output)
• Compact Disc-Interactive (CD-I)
• Video Single Disc (VSD)
• Super audio CD (Only the sound on the CD layer can be heard.
The sound on the high-density super audio CD layer cannot be
heard.)
®
DivX
BD/DVD/AVCHD
Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R
and SD Memory Card with MP3 files
Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R
and SD Memory Card with Windows Media™ Audio
files
title 1
title 2
MP3
WMA
JPEG
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R
and SD Memory Card with JPEG files
Audio CDs are divided into tracks.
Audio CD
track 3
• DVD-Audio
• HD DVD
track 1
track 2
track 4
track 5
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
• Disc with recording area less than 55mm in diameter
• Unauthorized disc (Pirated disc)
Data discs or SD Memory Cards containing DivX® (in discs only)/
MP3/Windows Media™ Audio/JPEG are divided into folders, and
the folders are subdivided into files.
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Color Systems
DivX®/MP3/Windows Media™ Audio/JPEG
folder (group) 1
folder (group) 2
BD and DVD are recorded in different color systems throughout
the world. The most common color system is NTSC (which is used
primarily in the United States and Canada).
Buttons on the main unit and remote control
file (track) 1 file (track) 2 file (track) 3 file (track) 4 file (track) 5
This unit uses NTSC, so BD or DVD you play back must be recorded
in the NTSC system. You cannot play back BD or DVD recorded in
other color systems.
5
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
Introduction
• At this point the new signal code of the unit is effective. Please
change the signal code of the remote control to match to the
signal code of the unit with following procedure.
About the Remote Control
Using a Remote Control
Keep in mind the following when using the remote control:
Loading the Batteries
• Make sure that there are no obstacles between the remote
control and infrared sensor window on the unit.
• Remote operation may become unreliable if strong sunlight or
fluorescent light is shining on infrared sensor window of the
unit.
ⅥChange the signal code of the remote control
Set to “BD1”:
A Open the battery
B Insert two “AA” (R6)
batteries, with each one
oriented correctly.
compartment cover.
Press and hold down both C and [1] on the remote control for at
least five seconds.
Set to “BD2”:
• Remote control for different devices can interfere with each
other. Avoid using remote control for other equipment located
close to the unit.
Press and hold down both C and [2] on the remote control for at
least five seconds.
• Replace the batteries when you notice a fall off in the operating
range of the remote control.
• The maximum operable ranges from the unit are as follows.
• If the signal code does not match, the signal code of the remote
control will be displayed on the front panel display.
• The default setting and the setting after you change the
batteries is “BD1”.
- Line of sight:
approx. 16 feet (5m)
- Either side of the center: approx. 16 feet (5m) within 30°
• If the code setting on the unit is “BD1”, and the setting on the
remote control is “BD2”, “BD2” is shown on the front panel
display.
C Close the cover.
Cautions on Batteries
30°
30°
• Use “AA” (R6) batteries in this remote control.
• Replace the batteries with new ones approximately once a
year, though this depends on the frequency with which the
remote control is used.
T Button illustrations used in this manual for operation
explanation are for the Remote Control Unit.
You can operate the unit using the button of the same
name on the front panel of the unit.
16 feet (5m) 30°
16 feet (5m)
16 feet (5m) 30°
• If the remote control does not operate within a close
proximity of the main unit, replace the batteries with new
ones, even if less than a year has passed.
• The included batteries serve only for verifying operation.
Replace them with new batteries as soon as possible.
• When inserting the batteries, be careful to do so in the
proper direction, following the and marks in the remote
control’s battery compartment.
Changing the Signal Code of a Remote Control
To avoid the other Marantz’s BD players responding the remote
signal of this unit, you can change the signal code of the remote
control. If the signal code of the remote control does not match to
the signal code of the unit, you cannot control the unit with the
remote control.
• To prevent damage or battery fluid leakage:
- Do not mix a new battery with an old one.
- Do not mix two different types of batteries such as alkaline
and manganese.
ⅥChange the signal code of the unit
1) In stop mode, press [SETUP].
2) Use [Y / Z] to select
, then press [ENTER].
- Do not short-circuit, disassemble, heat or dispose of
3) Use [Y / Z] to select
, then press [ENTER].
batteries in flames.
• Remove the batteries when not planning to use the remote
control for a long period of time.
• If the batteries should leak, carefully wipe off the fluid from
the inside of the battery compartment, then insert new
batteries.
4) Use [U / V] to select “Remote Control Setting”.
5) Press [ENTER] to select “BD1” or “BD2”.
Others
Remote Control Setting BD1
HDMI CEC
On
Media Select
Disc
Network Connection
Network Update
Enable(Easy)
6) Press [SETUP] to exit.
6
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
Introduction
Part Names and Functions
Front Panel
Rear Panel
1
2
3
4
5
6
7 8
9
10 11 12
DIGITAL OUT
COMPONENT VIDEO OUT VIDEO OUT
FLASHER
AC IN
IN
OUT
COAXIAL
2ch AUDIO OUT
R
L
NETWORK
HDMI OUT
7
8
3 4
5
6
2
1
The unit can also be turned on by pressing the buttons with circled numbers.
1. STANDBY indicator
8. A (OPEN/CLOSE) button
Press to open or close the disc tray.
9. Disc tray
Place a disc when opening the disc tray.
10. B (PLAY) button
Press to start or resume playback.
11. C (STOP) button
1. AC IN Terminal
6. 2ch AUDIO OUT jacks
This indicator lights up in red in standby
2. POWER ON/STANDBY button
Use to connect the AC cord to supply the
power.
Use an RCA audio cable to connect these
jacks to the 2-channel audio input jacks of
your amplifier with 2- channel input
terminals.
2. DIGITAL OUT (COAXIAL) jack
Use digital audio coaxial cable to connect to
an AV receiver, Dolby Digital decoder or
other device with a digital audio coaxial
input jack.
3. COMPONENT VIDEO OUT jacks
Use a component video cable to connect to
a display device with component input jacks.
4. VIDEO OUT jack
Press to turn on the unit, or to turn the unit
to the standby mode. (In standby mode, this
unit still consumes small amount of power.
To completely shut down the unit, you must
unplug the AC cord.)
7. NETWORK Terminal
Use to connect a telecommunications
equipment with LAN cable.
Press to stop playback.
12. F (STILL/PAUSE) button
8. HDMI OUT jack
3. HDMI RESOLUTION button
Press to pause playback.
Use an HDMI cable to connect to a display
with an HDMI input jack.
Press to set the HDMI jack’s video signal
output mode.
4. Infrared sensor window
Use an RCA video cable to connect to a TV
monitor, AV receiver or other device.
5. FLASHER IN / OUT jacks
Receives signals from your remote control so
that you can control the unit from a distance.
5. Display
Refer to “Front Panel Display” on page 9.
6. SD card slot
Note
• Do not touch the inner pins of the jacks on
the rear panel. Electrostatic discharge may
cause permanent damage to the unit.
This Input terminal is equipped for
controlling this unit by the external Infrared
(IR) control device. Connect the IR control
signal from a Keypad, IR repeater, etc. The
Output terminal repeats the IR signal which
was fed into the IR Flasher Input terminal for
another device.
Insert an SD Memory Card, and play back the
contents in it.
7. H / G (SKIP DOWN/UP) button
Press to skip down/up titles/chapters/tracks/
files.
7
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
Introduction
Remote Control
1. POWER ON button
19. STOP C button
• Press to turn the unit on.
• Press to stop playback.
• Press to exit from the title menu.
20. REW h button
2. POWER OFF button
• Press to turn the unit to standby mode.
3. A-B REPEAT button
• Press to mark a segment between A and B for A-B repeat
playback.
4. REPEAT button
• Press to select the repeat mode.
5. RANDOM button
• Press to display the random playback screen for shuffling the
playback order of tracks/files.
6. ZOOM button
• During playback, press to enlarge the picture on the screen.
7. CLEAR button
34
32
• During playback, press to fast reverse the playback.
21. HDMI RESOLUTION button
• Press to set the HDMI jack’s video signal output mode.
22. INPUT U / V buttons
• These buttons are used to switch the input when using one
of the supported Marantz amplifiers. However, this function
may not work with some of the older models.
23. VOLUME +/– buttons
33
31
1
2
3
4
5
• This button can be used to adjust the volume of devices
compatible with Marantz amplifiers that come with a remote
controller.
6
7
8
• Press to clear the information once entered, to clear the
marker settings, or to cancel the programming for CD, etc.
8. RED/GRN/BLU/YEL button
• Press to select item on some BD menus.
• When file list / thumbnail list is shown, press to switch
between pages.
24. STILL/PAUSE F button
30
28
9
• Press to pause playback.
10
• When playback is in pause, press repeatedly to forward the
playback step by step.
25. FFW g button
• During playback, press to fast forward the playback.
• When playback is in pause, press to slow forward the playback.
26. PLAY B button
• Press to start playback or resume playback.
27. MODE button
11
12
9. TOP MENU button
• Press to display the top menu.
10. Cursor U / V / Y / Z buttons
• Press to select items or settings.
11. ENTER button
29
27
13
14
• During playback, press to display the picture adjustment
menu, and dialog speed.
• During the JPEG playback, press to display menus for
changing the visual effect for switching the image or
changing the size of the image.
• Press to confirm or select menu items.
12. SETUP button
• Press to display the setup menu.
13. SUBTITLE button
• Press to display the subtitle menu.
14. ANGLE button
15
16
17
18
• In stop mode with BD inserted, press to display a menu for
19
20
26
24
setting the BD audio mode.
25
• During playback of BD, DVD, audio CD, AVCHD, DivX®, MP3
or Windows Media™ Audio, press to display a menu for
setting the virtual surround.
• Press to access various camera angles on the disc.
• Press to rotate the JPEG/Kodak Picture images clockwise by
90 degrees.
• During BD playback, press to turn the picture-in-picture
feature on or off (only applicable to BD-Video which
supports the PIP (BONUSVIEW) function).
• In stop mode with audio CD, or disc with MP3, Windows
Media™ Audio, JPEG files inserted, press to display menus for
program and random playback.
21
22
15. PURE DIRECT button
• Press to stop output of video signals, etc., and output only
the analog audio signals to achieve high quality sound from
analog audio outputs.
23
16. DISPLAY button
• Press to display the On-Screen display menu.
17. SKIP H button
28. AUDIO button
• Press to display the audio menu.
• During playback, press to return to the beginning of the
current title, chapter, track or file.
18. SKIP G button
29. RETURN button
• Press to return to the previously displayed menu screen.
The unit can also be turned on by pressing the buttons with
circled numbers.
• During playback, press to skip the next chapter, track or file.
8
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
Introduction
30. POP UP MENU / MENU button
• Press to display the pop-up menu/disc menu/file list.
• Press to change “Original” and “Playlist” on the TV screen.
31. SEARCH MODE button
Front Panel Display
1
2
• Press to display the search menu.
32. Number buttons
33. OPEN/CLOSE A button
• Press to open or close the disc tray.
34. DIMMER button
• Press to adjust the brightness of the front panel display.
* Brightness of the display can be adjusted. Refer to “Panel Display” in “Function Setup” on page 37.
Note
• [ZOOM] is not available for BD and AVCHD.
1) Displays playback status icon. Refer to the table below.
2) Displays various kinds of information such as title number, elapsed time, repeat mode, etc.
Playback status icon
Mode
Disc
SD Memory Card
Playback is in progress
Stop mode
Pause mode
Fast forward mode
Fast reverse mode
Slow forward mode
(for AVCHD only)
Appears while repeat function is set
Adjusting the Brightness of the Display
You can adjust the brightness of the display by the pressing [DIMMER] repeatedly. The brightness
changes as bright A dimmer A auto each time you press [DIMMER]. If you select auto, the display
gets dimmer during playback.
Note
• [DIMMER] is not available when the setup menu is displayed.
9
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Introduction
Introduction
Examples of Displays during Operation
Display
Description
Power on
Standby mode
Tray open
Tray is closing
Loading the disc
No disc inserted
This unit cannot read the disc or SD Memory Card inserted.
Stop mode
HDMI output mode (480i) is selected.
HDMI output mode (480p) is selected.
HDMI output mode (720p) is selected.
HDMI output mode (1080i) is selected.
HDMI output mode (1080p) is selected.
HDMI output mode (1080p24 frame) is selected.
HDMI output mode (Source Direct) is selected.
Pure direct mode is set to pure direct off.
Pure direct mode is set to video signal off.
Pure direct mode is set to front panel display off.
Pure direct mode is set to video signal and front panel display off.
Appears when the connected display device or other device does
not support HDCP.
Note
• When playing back the disc that contains more than 100 titles, display of the chapter and time
on the front panel display will be moved a few dots to the right.
10
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Connections
Connect the BD5004 as follows before using. Make connections according to the equipment you are connecting.
Some BD5004 settings may be necessary depending on the connection method. Check each connection item for more information.
1 - Playing back using multi-channel system
Playing back with a direct connection to a TV
Using BD-Live function or updating the software
version of BD5004
2
4
Audio + Video
BD5004
• Connecting to a Display Device with
HDMI Cable
: page 12
BD5004
• NETWORK connection
“Network Connection with LAN” (page 15)
• Connecting to a TV (2ch AUDIO OUT)
: page 12
: page 12
Video
Multi-channel Audio + Video
• Connecting the AC cord
: page 16
• Connecting to a TV
(VIDEO OUT/COMPONENT VIDEO OUT)
“Connecting to a Display Device and an Amplifier/
Receiver with HDMI Cable” (page 12)
or
Playing back 2-channel audio
3
Multi-channel Audio
BD5004
• Digital audio connection
“Digital Connection to an AV Amplifier with Built-in
Decoder” (page 14)
Video
• Connecting to a TV
(VIDEO OUT/COMPONENT VIDEO OUT)
: page 12
• 2ch audio connection
“Connection to a Device with 2-channels of Analog
Audio Inputs” (page 15)
11
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Connections
Connections
Connecting to a TV
Connecting to a Display Device with HDMI Cable
Connecting this unit to device with an HDMI jack using an HDMI cable enables digital transfer of both
digital video signals and multi-channel audio signals.
Make one of the following connections, depending on the capabilities of your existing device.
After making the connection, please make HDMI settings on setup menu according to your display
Method 1
standard picture
Method 2
better picture
device. Refer to pages 31-33.
this unit
analog audio
display device
Method 3
best audio and picture
DIGITAL OUT
COAXIAL
COMPONENT VID
AC IN
COMPONENT
VIDEO IN
AUDIO IN
VIDEO
IN
R
L
NETWORK
HDMI OUT
Y
display device
(Green)
A display device
PB/CB
with an HDMI
(Blue)
compatible port
PR/CR
(Red)
To HDMI Input jack
RCA
audio
cable
RCA video
cable
component video
cable
HDMI cable
and
or
Cables not included.
Please purchase the necessary cables at your local store.
Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the
HDMI connector.
this unit
(Red)
(Blue)
(Green)
FLASHER
OUT
2ch AUDIO OUT
L
N
VIDEO OUT
R
2ch AUDIO OUT
R
L
COMPONENT VIDEO OUT
Normal playback may not be possible when using a cable other than one on which the HDMI logo
is indicated (a non-HDMI-certified product).
P
R/CR
PB/CB
Y
COMPONENT VIDEO OUT
2ch AUDIO OUT
VIDEO OUT
Connecting to a Display Device and an Amplifier/Receiver with HDMI Cable
Connecting this unit to display device and an amplifier/receiver with an HDMI jack using HDMI cables
enables digital surround sound with high quality video.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Front Speaker (left)
Front Speaker (right)
Center
Speaker
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
this unit
Note
amplifier
display device
DIGITAL OUT
COMPONENT VID
AC IN
HDMI IN
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR,
pictures may be distorted due to the copy protection system.
COAXIAL
HDMI IN
HDMI OUT
NETWORK
HDMI OUT
• If the display device to which the player is to be connected is compatible with progressive scan
video, connect to the component video input.
• This unit’s COMPONENT VIDEO OUT jacks are compatible for 480i/480p/720p/1080i video
resolution. If the connected display device is not compatible for 480p/720p/1080i video
resolution, set “Component Output” to “480i”.
• If the picture is not output properly to the display device because of the “HDMI Video
Resolution” or “Component Output” setting, press and hold B on the front panel for more than
5 seconds. The “HDMI Video Resolution” setting will be reset to the default automatically.
• If you are using HDMI connection and set “HDMI Video Resolution” to “Source Direct”, “1080p” or
“1080p24”, picture may not be output properly to the display device. In that case, set “HDMI
Video Resolution” to “480i”, “480p”, “720p” or “1080i”.
HDMI cable
HDMI cable
Subwoofer
Surround
back (For
Surround
back (For
7.1-channel) 7.1-channel)
(left)
(right)
Surround Speaker (left)
Surround Speaker (right)
Cables not included.
Please purchase the necessary cables at your local store.
12
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Connections
Connections
HDMI Output Mode and Actual Output Signals
Audio Setting
Press [HDMI RESOLUTION] to select the HDMI output mode. HDMI video resolution changes as
following.
When using HDMI connections make the “HDMI Audio Out” settings in the “Audio” menu on the
setup menu according to the specifications of the device or monitor to be connected.
Front Panel Display
HDMI Video Resolution
480 Interlaced
Device to be connected
“HDMI Audio Out” setting
HDMI Multi(Normal)
Output HDMI audio signal
Device compatible with DTS,
DTS-HD, Dolby Digital, Dolby
Digital Plus or Dolby TrueHD
decoding
Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS, or DTS-HD
bitstream are output from HDMI
OUT. Make the speaker settings on
the connected AV amplifier, etc.
Multi-channel audio signals are
output from the HDMI OUT. Make
the speaker settings with the
speaker setting items appear after
you select “HDMI Multi(LPCM)”.
Refer to page 33.
Down-mixed 2-channel audio
signals are output from HDMI
OUT.
HDMI audio will be muted, and
Dolby Digital/DTS bitstream or
PCM will be output from DIGITAL
OUT depending on the “Digital
Out” setting. Refer to page 14.
Press [HDMI RESOLUTION]
480 Progressive
Press [HDMI RESOLUTION]
720 Progressive
Press [HDMI RESOLUTION]
1080 Interlaced
Press [HDMI RESOLUTION]
1080 Progressive
Press [HDMI RESOLUTION]
1080 Progressive 24 frame
Press [HDMI RESOLUTION]
Source Direct
Press [HDMI RESOLUTION]
Device compatible with 3 or
more channels of audio inputs
(not DTS, DTS-HD, Dolby Digital,
Dolby Digital Plus or Dolby
TrueHD compatible)
HDMI Multi(LPCM)
Device compatible with
2-channel audio input or device
not compatible with audio input
HDMI connection to a display
device, and digital audio
connection (coaxial) to an AV
amplifier.
HDMI 2ch
Audio Mute
ⅥAudio signals output from HDMI OUT
Disc type Audio recording
format
“HDMI Audio Out” setting
HDMI Multi(Normal) HDMI Multi(LPCM)
Note
HDMI 2ch
• You can change the HDMI output mode with [HDMI RESOLUTION] during playback as well. (This
is not available during BD/AVCHD playback.)
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
Dolby Digital
Dolby Digital Plus*1
Dolby TrueHD*2
DTS
DTS-HD*3
Multi PCM
Dolby Digital
DTS
Multi PCM
Multi PCM*4
Multi PCM*5
Multi PCM
Multi PCM*6
Multi PCM
Multi PCM
Multi PCM
2ch PCM
2ch Downmix PCM
2ch Downmix PCM*4
2ch Downmix PCM*5
2ch Downmix PCM
2ch Downmix PCM*6
2ch Downmix PCM
2ch Downmix PCM
2ch Downmix PCM
2ch PCM
• You can also change the HDMI output mode from “HDMI Video Resolution” in the “Video” menu
on the setup menu. Refer to page 32.
• In order to get natural and high quality film reproduction of 24-frame film material, use HDMI
cable (High Speed HDMI cable is recommended) and select “1080p24”, “Auto” or “Source Direct”
if the connected display device is compatible with 1080p24 frame input.
• For AVCHD and DivX®, 24-frame film material will be output as 60 frame, even if the connected
device is compatible with 1080p24 frame input and “HDMI Video Resolution” is set to “1080p24”,
“Auto” or “Source Direct”.
• When “HDMI Video Resolution” is set to “1080p”, “1080p24” or “Source Direct”, the “Component
Output” will be set to “480i” automatically.
• If the video is not properly from HDMI OUT jack after you set the “HDMI Video Resolution” setting,
change the HDMI video resolution to the compatible resolution by pressing
[HDMI RESOLUTION] or press and hold B on the front panel for more than 5 seconds to reset
the setting.
• “HDMI Deep Color” is available only when the display device is connected by HDMI cable and
supports HDMI Deep Color.
• For “Auto” in “HDMI Deep Color”, using the High Speed HDMI cable is recommended.
BD-Video
DTS-HD
PCM
Dolby Digital
DVD-Video DTS
PCM
DTS-CD
2ch PCM
DTS
Multi PCM
Multi PCM
Multi PCM
Multi PCM
2ch PCM
2ch Downmix PCM
2ch Downmix PCM
2ch Downmix PCM
2ch Downmix PCM
2ch PCM
Dolby Digital
PCM
Dolby Digital
MP3/ MP2
Dolby Digital
Multi PCM
Dolby Digital
2ch PCM
AVCHD
DivX®
audio CD/ MP3/ Windows
Media™ Audio
2ch PCM
2ch PCM
2ch PCM
13
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Connections
Connections
• If “BD Audio Mode” is set to “HD Audio Output” or the BD title does not have secondary or
interactive audio, the audio will be output as shown in the table.
• If the “BD Audio Mode” is set to “Mix Audio Output” and the BD title has secondary or interactive
audio, the audio will be output as follows:
When HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio Out” setting, the audio
signals output from DIGITAL OUT changes depending on the “Digital Out” setting. Refer to the
following table.
To set “Digital Out”, press [SETUP], then select “Quick” A “HDMI Audio Out” A “Audio Mute” or
*1 Dolby Digital or Multi PCM (Only the independent substream is decoded.)
*2 Dolby Digital or Multi PCM (Only the Dolby Digital substream is decoded.)
*3 DTS or Multi PCM (Only the core substream is decoded.)
“Custom” A “Audio” A “HDMI Audio Out” A “Audio Mute”.
Disc type
Audio recording format
“Digital Out” setting
Bitstream LPCM
Dolby Digital
*4 As shown in the table (Only the independent substream is decoded.)
*5 As shown in the table (Only the Dolby Digital substream is decoded.)
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
2ch Downmix PCM
2ch Downmix PCM*1
2ch Downmix PCM*2
2ch Downmix PCM
2ch Downmix PCM*3
2ch Downmix PCM
2ch Downmix PCM
2ch Downmix PCM
2ch PCM
*6 As shown in the table (Only the core substream is decoded.)
Dolby Digital
Dolby Digital
DTS
• If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as Multi
PCM or 2ch Downmix PCM depending on the capability of the connected device, even if you select
“HDMI Multi(Normal)” in“HDMI Audio Out” setting. Refer to page 33.
BD-Video
DTS-HD
DTS
Copyright protection system
PCM
Dolby Digital
DTS
2ch Downmix PCM
Dolby Digital
DTS
To play back the digital video images of a BD/DVD via an HDMI connection, it is necessary that both
the unit and the display device (or an AV amplifier) support a copyright protection system called
HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that
comprises data encryption and authentication of the connected AV device. This unit supports HDCP.
Please read the user guide of your display device (or AV amplifier) for more information.
DVD-Video
PCM
2ch PCM
DTS-CD
AVCHD
DTS
2ch Downmix PCM
2ch Downmix PCM
2ch Downmix PCM
2ch Downmix PCM
2ch PCM
* HDMI: High-Definition Multimedia Interface
Dolby Digital
PCM
Dolby Digital
MP3/ MP2
Dolby Digital
2ch Downmix PCM
Dolby Digital
2ch PCM
Note
• When using HDCP-incompatible display device, the image will not be viewed properly.
• The audio signals from the HDMI jack (including the sampling frequency, the number of
channels and bit length) maybe limited by the device that is connected.
DivX®
audio CD/ MP3/ Windows Media™ Audio
2ch PCM
2ch PCM
• Among the monitors that support HDMI, some do not support audio output (e.g. projectors). In
connections with device such as this unit, audio signals are not output from the HDMI output jack.
• This table applies only when HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio
Out” setting.
• If “BD Audio Mode” is set to “HD Audio Output” or the BD title does not have secondary or
interactive audio, the audio will be output as shown in the table.
• If the “BD Audio Mode” is set to “Mix Audio Output” and the BD title has secondary or interactive
audio, the audio will be output as follows:
Digital Connection to an AV Amplifier with Built-in Decoder
digital audio coaxial cable
*1 Only the independent substream is decoded.
*2 Only the Dolby Digital substream is decoded.
*3 Only the core substream is decoded.
audio
DIGITAL AUDIO INPUT
COAXIAL
DIGITAL OUT
DIGITAL OUT
COAXIAL
COMPONENT VIDEO OUT VIDEO OUT
FLASH
IN
AC IN
Note
NETWORK
HDMI OUT
• In order to output PCM signal from DIGITAL OUT jack while outputting the HDMI audio signal,
set “BD Audio Mode” to “Mix Audio Output” and set “HDMI Audio Out” to “HDMI Multi(LPCM)”.
COAXIAL
digital audio coaxial
input jack
this unit
Cables not included.
Please purchase the necessary cables at your local store.
ⅥAudio signals output from DIGITAL OUT (COAXIAL)
When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently output
from the HDMI OUT will be output from the DIGITAL OUT jack as well, except that HDMI 2ch signal
will be output from HDMI OUT jack, when connected device does not support Dolby Digital and DTS.
< When HDMI is not connected or “Audio Mute” is selected···>
14
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Connections
Connections
Connection to a Device with 2-channels of Analog Audio Inputs
Network Connection with LAN
• You can use a disc which offers BD-Live function by connecting the unit to the Internet.
(For BD-Live information, please refer to page 29.)
RCA audio cable
audio
Stereo component
Telecommunications
equipment (modem, etc.)
this unit
AUDIO IN
L
2ch AUDIO OUT
L
R
UT
FLASHER
IN
OUT
AC IN
R
Hub or broadband router
2ch AUDIO OUT
R
L
NETWORK
HDMI OUT
WAN
LAN
LAN
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
5
4
3
2
1
LAN cable
Note
LAN cable
• When connecting to a 2-channel audio stereo device, use the 2ch AUDIO OUT jacks. For software
recorded in multi-channel, analog signals that have been down-mixed into 2 channels are
output.
Internet
this unit
NETWORK
DIGITAL OUT
COAXIAL
COMPONENT VIDEO OUT VIDEO OUT
FLASHER
IN
OUT
AC IN
2ch AUDIO OUT
R
L
NETWORK
HDMI OUT
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
Note
• After connecting to the Internet, set up necessary network settings.
• Do not insert any cable other than a LAN cable to the NETWORK terminal to avoid damaging the
unit.
• If your telecommunications equipment (modem, etc.) does not have broadband router
functions, connect a broadband router.
• If your telecommunications equipment (modem, etc.) has broadband router functions but there
is no vacant port, use a hub.
• For a broadband router, use a router which supports 10BASE-T/100BASE-TX.
• Do not connect your PC directly to the NETWORK terminal of this unit.
15
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Connections
Connections
Connecting the AC cord
After you made all necessary connections, connect the AC cord to the AC IN. Then connect the AC
cord to the AC outlet.
AC outlet
DIGITAL OUT
COMPONENT VIDEO OUT
AC IN
AC 120V, 60 Hz
COAXIAL
AC cord
NETWORK
HDMI OUT
Supplied cables used in this connection are as follows:
• AC cord x 1
Note
• Insert the plugs securely. Incomplete connections will result in the generation of noise.
16
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
[POWER OFF]
Direct Playback
Disc playback
Ⅵ Direct Playback (BD/DVD-Video/AVCHD) : page 17
BD-V
AVCHD
DVD-V DVD-VR
[POWER ON]
A
Turn on the power of this unit. (Refer to “Turning
the Power On” on this page.)
Ⅵ Playing Back an Audio CD or a Disc with
DivX®/MP3/Windows Media™ Audio/JPEG
File
: page 18
1
: page 26
Turn on the display device and select the
appropriate input on the device to which the unit
is connected.
Ⅵ Kodak Picture CD
2
3
4
[U / V / Y / Z]
SD Card playback
Press A to open the disc tray.
: page 28
: page 18
[ENTER]
Place the disc on the disc tray with its label side
facing up.
Operations Using Disc Menu, Title Menu,
and Popup Menu
NOTE
•
may appear at the top-right on the screen when the
B
C
• During the playback of 2-layered disc, pictures may stop
for a moment. This happens when the 1st layer switches
to the 2nd layer. This is not a malfunction.
• The operation may vary when you play back with disc
menu. Refer to the manual accompanying the disc for
details.
Align the disc to the
disc tray guide.
Turning the Power On
Press [POWER ON] or <POWER ON/STANDBY> to turn on the
unit.
The power indicator turns off when the power is on.
Press A to close the disc tray.
5
It may take a while to load
the disc.
ⅥTurning the unit to the standby mode
Press [POWER OFF] or <POWER ON/STANDBY> to turn the unit
to the standby mode.
B C
Some discs may start playback automatically.
Press B to start playback.
The power indicator lights red.
Menu screen may appear.
6
7
In this case, use [U / V / Y / Z] to select the desired
item, then press [ENTER].
Note
• Power continues to be supplied to some of the circuitry even
when the power is in the standby mode. When leaving home
for long periods of time or when traveling, unplug the AC
cord from the AC outlet.
Press C once to stop playback temporarily.
Refer to “Resume Playback” on page 18.
To eject the disc:
Press A to open the disc tray, then remove the disc
before turning the unit to the standby mode.
<POWER ON/STANDBY>
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control
Button name only:
Buttons on the main unit and remote control
17
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
Pause
[POP UP MENU /
MENU]
Note
1) During playback, press F.
• If the feature is not available,
screen.
may appear on the TV
[TOP MENU]
[U / V / Y / Z]
Playback will be paused.
• Contents of menus and corresponding menu operations may
vary among discs. Refer to the manual accompanying the
disc for details.
F
[ENTER]
• BD/DVD/AVCHD menu varies depending on discs.
Playing Back a VR mode DVD-RW/-R
Note
B
g
C
• For BD, DVD and DivX®, set “Still Mode” to “Field” in the
“Video” menu if pictures in the pause mode are blurred (refer
to page 32).
DVD-VR
h
F
When you are playing back a VR mode DVD-RW/-R, you can
choose “Original” or “Playlist” if the disc contains a “Playlist”.
1) In stop mode, press [POP UP MENU / MENU] to call up the
DVD menu.
2) Use [Y / Z] to select “Original” or “Playlist”.
Operations Using Disc Menu, Title Menu, and Popup
Menu
Resume Playback
1) During playback, press C.
• Resume message will appear on the screen.
DVD-VR
BD-V DVD-V AVCHD
CH2 LP
Many of BD and DVD disc contains Disc menu (DVD), Title menu
(BD/DVD/AVCHD) or Pop-up menu (BD-Video) which describes
the contents of the disc, or a disc menu, which guides you through
the available functions in the disc. The contents of the menus may
differ depending on the discs.
Resume ON
Original
Playlist
Press 'PLAY' to play from here.
To play from the beginning,
press 'STOP' first and then 'PLAY'.
8. CH2 LP
9. CH2 LPS
10. JAN/ 1/09 12:13AM 35-16 SP
11. JAN/ 1/09 12:15AM 35-16 SP
12. JAN/ 1/09 12:03AM 35-16 SP
13. JAN/ 1/09 12:08AM 35-16 SP
14. JAN/ 1/09 12:12AM 35-16 SP
Title Info
∗∗:∗∗:∗∗
∗∗/∗∗/∗∗(∗∗∗)
∗∗:∗∗ ∗∗
Time
Date
Start
:
:
:
2/
2
<Example: BD>
Page Up
Page Down
Disc menu (DVD)
1) Press [POP UP MENU / MENU].
• The disc menu will appear.
2) Press B.
3) Use [U / V] to select desired title, then press B or [ENTER].
In a few seconds, playback will resume from the point at which
it stopped last. To cancel the resume playback and start
playing back the disc from the beginning, press C again while
the playback is stopped.
2) Use [U / V / Y / Z] to select an item, then press [ENTER].
Note
Title menu (BD/DVD/AVCHD)
1) Press [TOP MENU].
2) Use [U / V / Y / Z] to select an item, then press [ENTER].
• “Original” is the title which is actually recorded on the disc.
• Playlist is edited version of the Original.
• If the disc does not contain Playlist, Playlist will not be
displayed on the DVD menu.
Note
• For MP3, Windows Media™ Audio or JPEG, playback will
resume from the beginning of the current file.
• The resume information will be saved even when the power
is in standby mode.
Pop-up menu (BD-Video)
• This is a special feature available for some BD. When you
press [POP UP MENU / MENU], a menu pops out on the
screen while the contents still play back.
• If you open the disc tray or press C again in stop mode, the
resume information will be cleared.
• Resume playback may not be available for the BD that
supports Java applications (BD-J).
1) During BD playback, press [POP UP MENU / MENU].
2) Use [U / V / Y / Z] to select an item, then press [ENTER].
• In the “SD Card” mode, the resume information will be
cleared when:
- the SD Memory Card is removed.
- the unit is turned to the standby mode.
18
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
Fast Forward / Fast Reverse Playback
BD-V DVD-V DVD-VR CD AVCHD
Step by Step Playback
Dialog Speed
®
®
DivX
DivX
BD-V DVD-V DVD-VR AVCHD
AVCHD
DVD-V DVD-VR
BD-V
1) During playback, press F.
This function plays back approximately at 1.3 times of normal
playback while keeping the sound output. This function is
available only on discs recorded in the Dolby Digital format.
MP3
WMA
• Playback will pause and sound will be muted. The disc
advances frame by frame each time F is pressed.
1) During playback, press h or g repeatedly to select a
desired forward or reverse speed.
h Button
1) During playback, press [MODE] repeatedly until the dialog
speed setting appears.
F
1
2
2
3
3
4
4
5
5
g Button
Off
1
2) Press B to return to normal playback.
2) Press [ENTER] or [Y / Z] to switch
(x1.3), or off.
2) Press B to return to normal playback.
Note
“Off” : Plays back in normal speed.
• For BD, DVD and AVCHD, speed changes in 5 different levels.
speed changes in 3 different levels.
• For audio CD, MP3 and Windows Media™ Audio, sound will
be output at any speed of fast forward and reverse search.
• Set “Still Mode” to “Field” in the “Video” menu if pictures in
the pause mode are blurred (refer to page 32).
• Only step by step forward is available.
: Plays back approximately at 1.3 times of normal
playback.
“
”
3) Press B to return to normal playback.
Note
Note
• Every time you press
C, the setting will be turned “Off”.
[A-B REPEAT]
[REPEAT]
• For MP3 and Windows Media™ Audio, fast forward/fast
reverse search between different files are not available.
different tracks are not available during the program and
random playback.
• Subtitle can be viewed during this function.
• Picture adjustment, and audio language setting cannot be
changed during this function.
• Virtual surround does not function during this function.
• This function may not work at some points on a disc.
• During this function, Muilti/2ch PCM will be output from
HDMI output, 2ch PCM will be output from digital audio
output, or 2ch analog sound will be output from analog
audio out.
[RANDOM]
[BLU]
• For some DivX® files, fast forward/fast reverse search may not
function.
[YEL]
[CLEAR]
[U / V / Y / Z]
Slow Forward Playback
[ENTER]
[RETURN]
®
DivX
1) During playback, press F.
2) Press g.
[MODE]
• Slow motion playback will begin and sound will be muted.
3) Press g repeatedly to select a desired speed.
• Slow forward speed changes in 3 different levels.
g Button
C
B
1
2
3
4) Press B to return to normal playback.
Note
• Set “Still Mode” to “Field” in the “Video” menu if pictures in
the slow playback mode are blurred (refer to page 32).
• Slow reverse is not available.
19
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
3) Press B to start program playback.
Repeat Playback
Available repeat function may vary depending on the discs.
• Program playback will start.
Note
• The chapter/title/track/group repeat setting will be cleared
when moving to other chapter, title, track/file or folder.
• Repeat playback does not function during A-B repeat
playback.
Note
1) During playback, press [REPEAT] repeatedly until desired
repeat mode appears on the screen.
• During the program playback, press C once to set the resume
point, and then press B to resume the program playback
from where C was pressed (audio CD) or from beginning of
the file where C was pressed (MP3, Windows Media™ Audio,
or JPEG).
twice to display the
program screen. To go back to the normal program playback,
The following repeat modes are available.
• Repeat chapter/title is not available with some scenes.
• A-B Repeat can only be set within the current title or current
track/file.
Repeat mode
Chapter repeat
Available media
BD-V DVD-V DVD-VR
AVCHD
• During the program playback, press
C
• A-B Repeat is not available with some scenes.
• To cancel the A point which was set, press [CLEAR].
• A-B Repeat playback does not function during chapter, title,
track, group or all repeat playback.
The current chapter will be
played back repeatedly.
press [RETURN] to exit from the program screen, then press
• Your program is still stored until either the disc tray is open or
power is turned to the standby mode.
B.
Title repeat
BD-V DVD-V DVD-VR
AVCHD
• For some DivX® files, A-B Repeat playback may not function.
The current title will be
played back repeatedly.
• Up to 99 tracks/files can be entered.
• To repeat the current track/file in the program, press
[REPEAT] repeatedly until “
back. To repeat the entire program press [REPEAT]
repeatedly until “ All” appears during playback.
Track repeat
Program Playback
®
CD
DivX
MP3
Track” appears during play
The current track or file will
be played back repeatedly.
CD
MP3
WMA JPEG
WMA JPEG
You can program the disc to play back in your desired order.
Group repeat
• Even if an inserted disc contains mixed MP3 and Windows
Media™ Audio files, program function allows 99 files in
combination of MP3 and Windows Media™ Audio files.
• The total number of selected tracks for the program playback
will be displayed in the front panel display.
• Playback from a desired track/ file and random playback are
not available during program playback.
®
DivX
MP3 WMA
1) In stop mode, press [MODE].
• The program screen will appear.
2) Use [U / V] to select a track/file, then press [ENTER].
The current folder will be
played back repeatedly.
JPEG
All repeat
- / 7
®
DivX
DVD-VR
CD
All titles, tracks or files in
the media will be played
back repeatedly.
Program
MP3
MP3 WMA JPEG
MP3_1
MP3_2
MP3_3
MP3_4
MP3_5
MP3_6
MP3_7
A-B Repeat
PIP (Picture in Picture) (BONUSVIEW) Setting
1/
2
1/
1
Page Down
BD-V
®
BD-V DVD-V DVD-VR CD AVCHD
DivX
Some BD-Video have the PIP (picture-in-picture) function which
Desired section can be played back repeatedly.
<Example : MP3>
enables you to display the secondary video in the primary video.
You can call up the secondary video by pressing [MODE]
repeatedly whenever the scene contains the secondary video.
1) Press [A-B REPEAT] at the desired starting point A.
2) Press [A-B REPEAT] at the desired ending point B.
• The repeat sequence begins.
• For MP3, Windows Media™ Audio, and JPEG, use [U / V] to
select a folder, then press [ENTER] first, and then use
[U / V] to select a track/file, then press [ENTER].
• Press [CLEAR] to erase the last track/file of the program.
• Select “All Clear” at the bottom of the list to erase all the
tracks/files in the program.
3) Press [A-B REPEAT] to exit the sequence.
• The programmed track/file is displayed in the right hand
screen.
primary video
• If the entire program cannot be displayed on the screen, “L”
or “K” appears.
• Use [Y / Z] to go back forward between the hierarchy of
folders.
secondary video
• If eight or more tracks/files were set in a program, use [BLU]/
[YEL] to see all the tracks/files.
20
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
1) During playback, press [MODE] repeatedly until the PIP
Zoom
setting appears.
• PIP information will appear.
2) Use [U / V] to select the secondary video you want.
• The secondary video will be displayed and the secondary
audio will be output.
Note
• During the random playback, press C once to set the resume
point, and then press B to resume the random playback from
where C was pressed (audio CD) or from beginning of the file
JPEG).
®
DVD-V DVD-VR
JPEG
DivX
This function allows you to enlarge the video image and to pan
through the zoomed image.
1) Press [ZOOM] during playback.
• Playback will continue.
• During the random playback, press C twice to display the
random playback screen. To cancel the random playback,
press [RANDOM] when the random playback screen is
displayed.
• To repeat the current track/file in the random selection, press
[REPEAT] repeatedly until “
Note
2) Press [ZOOM] repeatedly to select a desired zoom factor:
x1.2, x1.5, x2.0, x4.0 or off.
• The secondary audio will not be output when the secondary
audio is set to “Off” or when “BD Audio Mode” is set to “HD
Audio Output”. Refer to “Setting the BD Audio Mode” on
page 25.
• “x4.0” zoom is not available for DivX® and JPEG.
x1.2
x1.5
x2.0
Track” appears during
playback. To repeat the entire random selection press
[REPEAT] repeatedly until “
All” appears during
Random Playback
x4.0
playback.
CD
MP3
WMA JPEG
• You cannot go back to the previous track/file during random
playback.
This function shuffles the play back order of tracks/files.
3) Use [U / V / Y / Z] to move the zoomed picture across the
• For a disc containing mixed MP3 and Windows Media™ Audio
files, random playback of those files will be performed.
1) In stop mode, press [RANDOM].
screen.
- - / 14
Total
Random
CD-DA
0 : 59 : 28
1
2
3
4
5
6
7
3 : 40
5 : 38
3 : 06
4 : 38
3 : 28
3 : 12
5 : 09
[the Number buttons]
[ZOOM]
[CLEAR]
[SEARCH MODE]
1/
2
Page Down
[U / V / Y / Z]
<Example: audio CD>
[ENTER]
[RETURN]
4) Press [ZOOM] repeatedly to exit zoom mode.
[ANGLE]
G
H
21
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
ⅥUsing [SEARCH MODE]
By using the [SEARCH MODE], you can select following search
options.
ⅥMarker search
This feature allows you to assign a specific point on a title or track
to be called back later.
Note
• For BD and AVCHD, zoom function is not available.
• Zoom function does not work while disc menu is shown.
• Navigation screen is not available on JPEG.
• You cannot pan through the zoomed picture on some JPEG
files.
Search mode
Available media
1) During playback, press [SEARCH MODE] repeatedly until
marker setting appears.
2) Use [Y / Z] to select a marker number (1-9).
/
BD-V DVD-V DVD-VR
AVCHD
Title / Chapter search
• For some DVD, “x4.0” zoom is not available.
• For DivX® files with small image, zoom function is not
available.
: :
--- -- -- --
Track Search
®
CD DivX
MP3
• For DivX®, depending on the size of the image, some zoom
factor may not be available.
3) When the disc reaches the point you want to set a marker,
press [ENTER].
WMA JPEG
• For DivX®, when changing the zoom factor or moving the
zoom position, the screen may become black for a moment.
This is not a malfunction.
• The title or track and elapsed playback time will appear on
the screen.
Time Search
BD-V DVD-V DVD-VR
®
4) Press [SEARCH MODE] or [RETURN] to exit.
5) To return to the marker later, call the marker setting by
pressing [SEARCH MODE] repeatedly during playback or in
then press [ENTER].
CD AVCHD DivX
Marker Search
BD-V DVD-V DVD-VR
AVCHD
Camera Angle
BD-V DVD-V
1) Select a type of search by pressing [SEARCH MODE].
• Every time you press [SEARCH MODE], type of search
changes.
2) Enter the desired chapter, track, file, title number or time
to search for using [the Number buttons].
• Chapter, title, track or time search will start.
e.g.
Some BD and DVD contain scenes which have been shot
simultaneously from various angles. You can change the camera
Note
• Opening the disc tray, turning the unit to the standby mode
or selecting “AC” at step 2) and pressing [ENTER] will erase all
markers.
angle when
appears on the screen.
1) Press [ANGLE] during playback.
• The selected angle will be displayed on the display bar at the
top of the screen.
• To clear a marker, use [Y / Z] to select the marker number to
be cleared and press [CLEAR].
• You can mark up to 9 points.
• For BD-Video and AVCHD, marker search between different
titles is not available.
• For BD and AVCHD, you can return to the maker only during
playback.
• For the disc with less than 10 titles, press the title number
directly.
• For discs with 10 or more but less than 100 titles, to play back
a single-digit title, press [0] first, then the title number (e.g.
for title 3, press [0], [3]). To play back a double-digit title,
press the title number.
2) Use [U / V] to select your desired angle.
Note
• If the “Angle Icon” setting is “Off” in the “Others” menu,
will not appear. Refer to page 37.
• For discs with 100 or more titles, to play back a single or a
double-digit title, press [0] first, then the title number (e.g.
for title 3, press [0], [0], [3] and for title 26, press [0], [2], [6]).
To play back a triple-digit title, press the title number.
Search
ⅥUsing H / G
1) Press G to skip to the next chapter, track or file during
Note
playback.
• During program and random playback, search functions are
not available except the search using H / G.
• Time search function is available only in the same track, file or
title.
To go back to the previous chapter, track or file, press H
twice in quick successions.
Note
• If title contains no chapters, H / G changes the title.
• For some DivX® files, time search may not function.
• For BD and AVCHD, chapter and time search are available
only during playback.
22
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
ⅥBit rate information
WMA
[POP UP MENU /
MENU]
[TOP MENU]
OFF (File information (elapsed time)) A File name information
A Tag information (title name) A Tag information (artist name)
A OFF (File information (elapsed time))
1
[U / V / Y / Z]
[ENTER]
[AUDIO]
A
B L1
[SUBTITLE]
JPEG
OFF A File information A File name information A OFF
On-Screen Display
ⅥChapter information
<For VR mode DVD-RW/-R>
You can check information about the current disc by pressing
[DISPLAY].
11
To call the On-Screen Display, press [DISPLAY] during playback.
Depending on the media, available information varies.
AORG
A
B
2/5 0:00:00
BD-V AVCHD
OFF A Title/Chapter information A Title information (elapsed
time) A Title information (remaining time) A HDMI information
A OFF
I Bit rate (the amount of video data currently being read)
J Layer number (Only for 2-layered discs)
<Title / Chapter information for BD/AVCHD>
(L0: Layer 0 is played back. L1: Layer 1 is played back)
K Type of title (ORG: original, PL: playlist)
DVD-V DVD-VR
OFF A Chapter information (elapsed time)
ⅥTrack/File information
2/5
1
A Chapter information (remaining time) A Title information
(elapsed time) A Title information (remaining time)
A Bit rate information A HDMI information A OFF
12
13
14
15
2/5 0:00:00 SD
T
A Current chapter number/total number of chapters
B Elapsed time/remaining time of the current chapter
C Current repeat setting (Only when repeat setting is active)
(C: Chapter repeat, T: Title repeat, AB : A-B repeat)
D Indicates that the multi camera angle images are available
on the scene
CD
OFF (Track information (elapsed time)) A Track information
A Disc information* (remaining time) A OFF (Track information
(elapsed time))
L Current track (file) number/total number of track (file)
M Elapsed time/remaining time of the current track (file)
N Indication of SD Memory Card playback
(* not available during the program/random playback)
E Current playback status
F Current title number
O Current repeat setting (Only when repeat setting is active)
®
DivX
(T: Track/file repeat, G: Group repeat, A: All repeat)
OFF A File information (elapsed time) A File information
(remaining time) A File name information A HDMI information
A OFF
ⅥTitle information
ⅥDisc information
16
17
MP3
0:04:00
1/10
OFF (File information (elapsed time)) A File name information
A OFF (File information (elapsed time))
1/10 0:04:00
A
G Current title number/total number of titles
H Elapsed time/remaining time of the current title
P Current track number/Total number of tracks
Q Elapsed time/remaining time of the current disc
23
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
ⅥHDMI information
Ⅵ
®
DVD-V DVD-VR CD AVCHD DivX
1) During playback, press [AUDIO].
2) Use [U / V] to select your desired audio stream/channel.
ⅥFile name information
22
18
Video Info
Audio Info
Max Channel
:
:
:
YCbCr
/
1080i
1
ENG
Dolby D
3/2.1ch
48k
/4
MP3 MUSIC
23
4
Dolby Digital
6ch
• For audio CD, you can select following options.
“Stereo” : Both right and left channels are active (stereo)
“L-ch”
“R-ch”
3) Press [AUDIO] to exit.
: Only left channel is active
: Only right channel is active
U HDMI video format
V Resolution of the HDMI output image
W HDMI audio format
R Media icon and File name
DivX® file
:
: MP3 file
: JPEG file
Windows Media™
Audio file
X Maximum numbers of audio channels that can be
:
accepted by the connected device
Note
• For VR mode DVD-RW/-R with MTS (Multi-channel Television
Sound) system, you can switch between “1.Main” (main
audio), “1. Sub” (sub audio), and “1.Main/Sub” (main and sub
audio).
ⅥTag information
Note
• If HDMI is not connected, “---” will be displayed for HDMI
information.
19
• For some BD, secondary audio will be output even when sub-
picture is off.
• The sound mode cannot be changed during playback of discs
not recorded in multiple sound.
• Some discs allow to change audio language setting on the
disc menu. (Operation varies between discs. Refer to the
manual accompanying the disc.)
• Pressing [AUDIO] may not work on some discs with multiple
audio Streams/Channels (e.g. DVD which allow to change
audio setting on the disc menu).
TITLE
Selecting the Format of Audio and Video
Selecting Audio Streams/Channels
®
BD-V DVD-V DVD-VR CD AVCHD
DivX
Some discs or SD Cards with AVCHD files contain multiple audio
streams. Those are often in different audio languages or audio
formats. For BD available audio varies depending on the “BD
Audio Mode” setting. Refer to page 25 for more information.
[DISPLAY]
20
the code will be displayed every time you change the Audio
Language setting. If you choose any other Languages, “---”
will be displayed instead (refer to page 48).
• Audio Language selection cannot be made during dialog
speed (refer to page 19).
ARTIST NAME
Ⅵ
BD-V
1) During playback, press [AUDIO].
2) Use [U / V] to select “Primary” or “Secondary” audio to
set, then press [ENTER].
S Title name based on tag information of current Windows
Media™ Audio file
Primary
• If the disc has no audio language, “Not Available” will be
displayed.
T Artist name based on tag information of current Windows
1
ENG
Secondary
ENG
Dolby D
Multi-ch
Multi-ch
/3
/3
Media™ Audio file
• For discs with DivX® files, only MP3, MP2 or Dolby Digital
audio is displayed. Other audio will be displayed with “---”.
(Selecting audio streams or channels is not available.)
2
Dolby D+
“Primary”
: Sets the audio for the main picture.
“Secondary” : Sets the audio for the sub-picture. When
sub-picture is on, the “Secondary” audio will
be output with the sub-picture.
• In order to listen to the secondary audio, the “BD Audio Mode”
must be set to “Mix Audio Output”. Refer to page 25.
3) Use [U / V] to select your desire audio stream/channel.
4) Press [AUDIO] to exit.
24
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
Video / audio outputs for each mode
Selecting Subtitle Language
BD-V DVD-V ΑVCHD DivX
“Normal”
:
Normal playback mode (pure direct mode
is off).
®
[U / V / Y / Z]
BD, DVD-Video, AVCHD and DivX® may have subtitles in 1 or more
languages. Available subtitle languages can be found on the disc
case. You can switch subtitle languages anytime during playback.
“VideoOff”
“Disp.Off”
:
:
Video signal will not be output.
[ENTER]
[RETURN]
Circuitry for front panel display and
indicators will be shut down.
[MODE]
[PURE DIRECT]
Ⅵ
BD-V
“All Off”
:
Video signal will not be output and
circuitry for front panel display and
indicators will be shut down.
1) During playback, press [SUBTITLE].
2) Use [U / V] to select “Primary Subtitle”, “Secondary
Virtual Surround
Subtitle” or “Subtitle Style”, then press [ENTER].
Note
®
BD-V DVD-V DVD-VR CD AVCHD
DivX
Primary Subtitle
Secondary Subtitle
2 ENG/11
2 ENG/11
2/25
• If you turn off the unit or put this unit to standby mode, the
pure direct mode will go back to “Normal”.
• [PURE DIRECT] is not available when the setup menu is
displayed.
MP3
WMA
You can enjoy stereo phonic virtual space through your existing
2-channel stereo system.
“Primary Subtitle”: Sets the subtitle for the main picture.
“Secondary Subtitle”: Sets the subtitle for the sub-picture.
1) During playback, press [MODE] repeatedly until the virtual
surround setting appears.
“Subtitle Style”:
Sets style of the subtitle.
Setting the BD Audio Mode
3) Use [U / V] to select your desired subtitle.
4) Press [SUBTITLE] to exit.
Off
BD-V
BD audio mode is to choose between two ways; you could output
the secondary and interactive audio accompanied by the primary
audio or you could output the primary audio only. Depending on
the setting of the mode, Dolby Digital, DTS, Dolby Digital Plus,
Dolby TrueHD, or DTS-HD output changes between Multi PCM
and bitstream.
2) Use [U / V] to select “1” (Natural effect), “2” (Emphasized
effect) or “Off”.
Ⅵ
®
DivX
DVD-V AVCHD
3) Press [RETURN] to exit.
2) Use [U / V] to select your desired subtitle.
Note
1
ENG
/3
• Select virtual surround “Off” or lower the volume if the sound
1) In stop mode with BD inserted, press [MODE].
2) Use [U / V] to select desired setting.
Ⅵ“Mix Audio Output”
If it is available, BD-Video’s secondary and interactive audio will be
output with the primary audio.
3) Press [SUBTITLE] to exit.
is distorted.
• This function cannot be used during dialog speed (refer to
page 19).
Note
• For the virtual surround, audio signal will always be 2-channel
• Some discs will only allow you to change the subtitle from
the disc menu. Press [TOP MENU] or [POP UP MENU /
MENU] to display the disc menu.
• If 4-digit language code appears in the subtitle menu, refer to
“Language Code” on page 48.
PCM.
• The secondary audio is the audio for the sub picture
(Director’s comment etc.) and the interactive audio is the
audio for the interactive application (Button click sounds
etc.).
Pure Direct Mode
• If the disc has no subtitle language or subtitle style, “Not
Available” will be displayed.
®
BD-V DVD-V DVD-VR CD AVCHD
DivX
Ⅵ“HD Audio Output”
output Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD sound of BD through HDMI connection.
• For DivX®, the screen only displays the number of subtitle
languages.
MP3
WMA
Use this function to shut down unused circuitry to achieve high
quality analog sound.
1) Press [PURE DIRECT] repeatedly to select your desired pure
3) Press [RETURN] to exit.
direct mode.
• You can also set “BD Audio Mode” from the setup menu.
Refer to page 33.
• Each time you press [PURE DIRECT], the pure direct mode
changes as “Normal” A “VideoOff” A “Disp.Off” A “All Off”
A “Normal”. The modes will be displayed on the front panel
display.
Note
• Refer to pages 13 - 14 for more information of audio settings.
25
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
Playing Back an Audio CD or a Disc with DivX®/MP3/
Windows Media™ Audio/JPEG File
Adjustment range
(* : Default setting)
Off*
+1: Execute MPEG
noise reduction
which reduce the
block noise and
mosquito noise on
the subtitle on movie.
+2: Execute 3D noise
reduction which
detect and delete the
noise by comparing
each picture frames.
Adjusting the Picture
Item
Description
®
DivX
BD-V DVD-V DVD-VR AVCHD
You can adjust the picture quality and store the setting you have
adjusted on memory 1-5.
®
CD DivX
MP3 WMA
JPEG
Insert a disc with DivX®, MP3, Windows Media™
Audio, JPEG files.
1) During playback, press [MODE] repeatedly until the picture
adjustment menu appears.
1
2
• The file list will appear on the screen.
Noise
Reduction
(Not
available for
BD/AVCHD)
• Picture adjustment menu:
Use [U / V] to select a desired folder, file or title,
then press [ENTER]. Use [Y / Z] to go back and
forward between the hierarchies.
• If you press B or [ENTER] on the files, playback will
start.
Reduces the noise of the
playback picture.
Memory 1
2) Use [U / V] to select a memory from “Memory 1” to
“Memory 5” to store your setting, then press [ENTER].
3) Use [U / V] to select an item to be adjusted, then use
[Y / Z] to adjust the setting.
-- / 28
+3: Execute both
MPEG noise reduction
and 3D noise
2
File List
ABC
2.Brightness
1.Contrast
0
0
MP3_1
MP3_2
MP3_3
MP3_4
MP3_5
MP3_6
MP3_7
reduction.
6.Black Level
7.5 IRE
5
2/
3
[BLU]
Adjustment range
(* : Default setting)
Page Up
Page Down
Media Mode
Item
Description
[YEL]
Adjusts the difference
between the bright and
dark parts of the picture.
Adjusts the brightness of
the picture.
A Track/ file information
B Playback status
C Current disc or folder name will be displayed.
Contrast
-7 to +7 (0*)
[U / V / Y / Z]
[ENTER]
(For audio CD, “CD-DA” will be displayed.)
Brightness
Sharpness
0 to +15 (0*)
-6 to +6 (0*)
D List of the file/ folder names in the current folder/disc
E Current page/ total page number
F Operation guide
Adjusts the sharpness of
the picture.
Changes the amount of
gamma correction to
adjust overall brightness
of a picture. Make dark/
bright section easier to
see.
B
Icons:
Gamma
Correction
0 to +5 (0*)
-7 to +7 (0*)
: Folders
DivX® files
:
Adjusts the balance
between green and red.
Color
: MP3 files
0 IRE or 7.5 IRE
(7.5 IRE*)
Black Level *1
Adjusts the black level.
: Windows Media™ Audio files
: JPEG files
*1 Not effective for the video signal of COMPONENT VIDEO OUT
(480p/720p/1080i) and HDMI OUT jacks.
It is recommended that files to be played back in this unit are
recorded under the following specifications:
26
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
<DivX®>
Official DivX® Certified product
• Playable codec of AVI files
To Play Back the DivX® Subtitle Created by the
User.
product
• When you purchased or rented a DivX® file through the official
site of DivX® video which is called DivX® Video-On-Demand
(VOD) services, a registration code is required every time you get
the new file from the DivX® VOD services. Refer to “DivX(R) VOD”
on page 38.
DivX® 3.x, DivX® 4.x, DivX® 5.x,
DivX® 6.x
:
The subtitle created by the user can be displayed during DivX®
playback.
• Maximum size of image
: 1920 x 1080 @30 fps
1280 x 720 @60 fps
1) After selecting the DivX® file, use [U / V] to select the
file you want to playback, then press [BLU].
Subtitle list will appear.
• Sampling frequency of audio : 16 kHz - 48 kHz
• Audio type
• Some DivX® VOD files are
DivX(R) VOD Rental
: MPEG1 audio layer 3 (MP3),
restricted with the limited
MPEG1 audio layer 2,
Dolby Digital
- - / 11
This rental has
views left.
playable times (you cannot play
them back beyond the limit). If
your DivX® VOD file has such limit,
the playback confirmation screen
will appear.
Do you want to use one of your views now?
Subtitle List
55
<MP3 / Windows Media™ Audio>
• Sampling frequency
• Constant bit rate
[ Off
]
: 44.1 kHz or 48 kHz
[ SMI ]
[ SRT ]
[ SUB ]
Yes
No
: 112 kbps - 320 kbps (MP3),
48 kbps - 192 kbps (Windows
Media™ Audio)
• Use [Y / Z] to select “Yes” if you want to play back the file, or to
select “No” if you do not wish to play it back. Then, press [ENTER]
to confirm the selection.
File List
<JPEG>
• Upper limit
• If there is more than one extension, the extension selection
appears in the subtitle list.
: 2,560 x 1,900 dots
• You cannot play back the
(sub sampling is 4:4:4)
5,120 x 3,840 dots
(sub sampling is up to 4:2:2)
Rental Expired
DivX® VOD files, of which rental
2) Use [U / V] to select the desired extension of the
This rental is expired.
period has been expired. In such
subtitle file you want to display, then press [ENTER].
Please push ‘ENTER’.
case, press [ENTER] and select
other files that can be played
back.
• Lower limit
: 32 x 32 dots
• If you insert a BD-RE/-R, DVD-RW/-R, CD-RW/-R with DivX® files
that are mixed with MP3/Windows Media™ Audio/JPEG files, the
playback media selection screen will be displayed. Use [U / V]
to select your desired media to play back then press [ENTER].
• You cannot play back the
Note
Authorization Error
DivX® VOD files obtained with
• The system can recognize up to 255 folders/999 files for CD,
999 folders/9999 files for BD, DVD and SD Memory Card.
• The name of folder and file can be displayed up to 28
characters. Unrecognizable characters will be replaced with
asterisks.
This player is not authorized to play this video.
different registration codes on
Please push ‘ENTER’.
Please select the media to play back.
this unit. Press [ENTER] and select
other files that can be played
back.
Video
Audio
Picture
• The 9th and deeper hierarchies cannot be displayed for CD
and the 10th and deeper hierarchies cannot be displayed for
BD, DVD and SD Memory Card.
• You cannot playback the DivX®
Resolution Error
file that has the resolution which
• Files whose extension is other than “.avi/ .divx (DivX®)”, “.mp3
(MP3)”, “.wma (Windows Media™ Audio)” or “.jpg / .jpeg
(JPEG)” will not be listed.
This player does not support this video format.
this unit does not support. This
Please push ‘ENTER’.
• Press [YEL] to call up the playback media selection screen in stop
mode.
unit does not support the DivX®
files that have the image size that
exceeds 1920 x 1080 @30 fps or
1280 x 720 @60 fps.
• Some unplayable folders or files may be listed due to the
recording status.
• High-resolution JPEG files take longer to be displayed.
• Progressive JPEG files (JPEG files saved in progressive format)
cannot be played back on this unit.
• For DivX® files with audio format
Audio Format Error
other than MPEG1 audio layer 3
This player does not support this audio format.
• This unit recognize up to 8 characters of file name in the SD
Memory Card. Characters after 8th will not be displayed.
• If a disc contains AVCHD files, the playback of other files
which are in the same disc is not available.
(MP3), MPEG1 audio layer 2 and
Please push ‘ENTER’.
Dolby Digital, audio will not be
output and only the video will be
output.
• File list cannot be called up during playback of DivX® or JPEG
files.
27
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
What is DivX®?
Tips for JPEG/Kodak Picture Playback
• DivX® is a codec (compression/decompression) that can compress
images to a very small amount of data. The software can compress
video data from almost any devices to the size that can be sent on
the Internet without compromising visual quality of the images.
• A file with an extension of “.avi” and “.divx” is called an DivX®
file. All files with the DivX® extension are recognized as MPEG4.
• For more information for DivX®, please visit
• Every press on [ANGLE] will turn the image clockwise by 90
degrees when an image is displayed.
[U / V / Y / Z]
• To change the visual effect for switching the playback image,
press [MODE] once, then use [Y / Z] or [ENTER] to switch
between “Cut In/Out” and “Fade In/Out”. The size change
may have no effect on some files (e.g. files with a small
picture size).
• To change the size of the playback image, during the JPEG/
Kodak Picture playback. Press [MODE] twice, then use
[Y / Z] or [ENTER] to switch between “Normal” (100%) and
“Small” (93%). The size change may have no effect on some
files (e.g. files with a small picture size).
[ENTER]
[SETUP]
[ANGLE]
[RETURN]
[MODE]
Note for DivX®
• Even if the file has an extension of either “.avi” and “.divx”, this
unit cannot play it back if it is recorded in the format other
than DivX®.
C
B
• It may take a while for audio and images to be output after
you inserted a disc and pressed B.
• When playing back the files recorded in high bit rates, the
images can be interrupted in some occasions.
Kodak Picture CD
This unit can also run JPEG files stored on Kodak Picture CD. You
can enjoy picture images on the display device set by playing back
the Picture CD. This unit confirms to ver.7.0 of Kodak Picture CD.
For details of Kodak Picture CD, contact a shop that provides
developing service of Kodak Inc.
Reading the SD Memory Card
MP3
JPEG
WMA
AVCHD
• Although DivX® logo has been obtained for this unit, it may
not be able to play back some data, depending on the
characteristics, bit rates, or audio format settings, etc.
• A DivX® file whose file size exceeds 32 GB cannot be played back.
• If a large-sized DivX® file is selected, it may take awhile to start
the playback (over 20 seconds sometimes).
You can play back the AVCHD, MP3, Windows Media™ Audio and
JPEG files in an SD Memory Card. With the SD Memory Card, you
can also enjoy the special additional contents for BD-ROM Profile
1.1 which can be downloaded from the Internet. You can store the
contents on an SD Memory Card via computer and play them back
with the BD-Video. For more information about the special
additional contents, please refer to the instruction book that came
with the disc.
When Kodak Picture CD is inserted in this unit, Kodak
Picture CD menu appear automatically on the screen.
1
- - / 32
• If you try to playback the DivX® file that has the screen
resolution which this unit does not support, the playback will
be stopped and error message will appear.
Thumbnail
Pictures
Picture 1
Picture 2
Picture 5
Picture 3
Picture 6
• Some DivX® files cannot be played back on this unit due to
the configuration and characteristics of the disc, or due to the
condition of recording and authoring software.
Picture 4
• If DivX® files written on a CD-RW/-R or DVD-RW/-R cannot be
played back, rewrite them on a BD-RE/-R and try to play back.
2/
6
Page Prev
Page Next
Note for DivX® Subtitle
ⅥInserting the SD Memory Card and playback
Insert an SD Memory Card, with the label side
A File information
B Playback status
C Operation guide
• To utilize this function, the following conditions must meet.
- Playback file and the subtitle file must have the same name.
- Playback file and the subtitle file must locate in the same folder.
- Only the subtitle files with the following extensions are
supported; .smi (.SMI), .srt (.SRT), .sub (.SUB), .ass (.ASS), .ssa
(.SSA), .txt (.TXT). (.sub (.SUB) and .txt (.TXT) files may not be
recognized.)
facing up, into the SD card slot until it clicks.
If no disc is in operation, “Media Select” screen will
appear on the TV screen.
1
D Current page/ total page number
Use [U / V / Y / Z] to select a desired track to be
played back, then press B or [ENTER].
• An image will be played back from the selected track
and go to the next one in turn.
2
3
- The subtitles that exceeds the playback time of the DivX® file
will not be displayed.
SD Memory Card
Press C to stop playback.
Use [U / V] to select “SD Card”, then press
[ENTER].
The file list will appear.
2
28
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Playback
Playback
ⅥRemoving the SD Memory Card
Follow the step 2 in “Playing Back an Audio CD or
a Disc with DivX®/MP3/Windows Media™ Audio/
JPEG File” on page 26.
Enjoying BD-Live Discs with Internet
BD-V
3
In stop mode, push the SD Memory Card and then
slowly remove your finger.
You can enjoy the BD-Live functions which enable you to use the
interactive functions when the unit is connected to the Internet.
(For the Network connection, refer to page 39.)
1
ⅥSetting the media
selection, follow the following procedure to select the media to
playback.
Grasp the card and pull it out from the SD card
slot.
This will set the unit to “Disc” mode.
Examples for BD-Live interactive functions :
- Download the additional contents such as the movie’s trailer,
subtitles and BD-J, etc.
2
- While downloading, special video data may be played back.
Press [SETUP] in stop mode.
Compatible Cards:
- SD Memory Card (8MB - 2GB)
• Service and functions differ depending on the disc.
• Follow the instructions given by the disc when using the
BD-Live function.
• You must insert an SD Memory Card when using the BD-Live
function. (SD Memory Card of 1GB is recommended.)
• Do not remove the SD Memory Card when using the BD-Live
function.
1
- SDHC Memory Card (4GB - 8GB)
- miniSD Card (8MB - 2GB)
- microSD Card (8MB - 2GB)
Use [Y / Z] to select
, then press [ENTER].
2
3
4
• For miniSD Card and microSD Card, adapter will be required.
Use [U / V] to select “Media Select”.
Note
• The “Media Select” screen will disappear under the
conditions listed below:
Press [ENTER] repeatedly to select “SD Card”.
Note
- when the screen saver is activated.
- when [RETURN] is pressed.
- when the setup menu is called up.
• You must connect the unit to the Internet and set up
necessary settings in order to use the BD-Live function.
• For certain discs, setting for “BD-Live Setting” may need to be
changed.
• Do not remove the card during its playback.
• This unit supports SD Memory Card with FAT12/FAT16 file
system, and SDHC Memory Card with FAT32 file system.
• Do not delete the folders or files in the SD Memory Card with
your computer. This unit might not read the SD Memory
Card.
• This unit recognizes up to 8 characters of file name in the SD
Memory Card. Characters after 8th will not be displayed.
• If a folder or file name includes one of the following
unrecognizable characters, the folder or file name may not be
displayed correctly.
Quick
Media Select
SD Card
BD Audio Mode
HDMI Audio Out
HDMI Video Resolution
Component Output
OSD Language
Mix Audio Output
HDMI Multi(Normal)
Auto
480i
English
• Depending on your connection environment, it may take
time to connect to the Internet or the Internet may not be
connected.
• When BD-Live functions are used and the unit is connected to
the Internet, you may be charged for this communication.
• This will set the unit to “SD Card” mode. To play
back the contents in any discs, exit “SD Card” mode
by selecting “Disc”.
Note for AACS Online
• The player or disc IDs may be sent to the content provider
when playing back a disc with BD-Live function.
• If you save your viewing history on the server by using these
IDs, you will be introduced to other similar movies.
• You can save game score histories.
Press [SETUP] to exit.
5
- Unrecognizable characters :
. , " = + [ ] ; / \ : | ¥
• Even if you turn the unit to the standby mode in “SD Card”
mode, it will be in “Disc” mode the next time you turn it on.
29
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Use [U / V] to select setting items.
Follow the procedure below depending on the
setting items.
For setting item A :
Press [ENTER] repeatedly to change options.
For setting item B :
[the Number buttons]
[CLEAR]
3
4
5
6
Follow the procedure below depending on the
setting items.
For setting item A :
Press [ENTER] repeatedly to change options.
For setting item B :
1)Press [ENTER].
2)Use [U / V] to select options, then press [ENTER].
• Use [Y] or [RETURN] to go back to the previous
screen.
[RED / GRN / BLU /
YEL]
1) Press [ENTER].
2) Use [U / V] to select options, then press
[U / V / Y / Z]
[ENTER].
[ENTER]
• Use [Y] or [RETURN] to go back to the previous
screen.
[SETUP]
[RETURN]
Press [SETUP] to exit.
Press [SETUP] to exit.
B
5
Using the Setup Menu
In the setup menu, you can change the setting for audio, video,
language, etc. You cannot change the setting during playback.
Custom
Custom menu contains all the setting items.
Quick
Press [SETUP] in stop mode.
Quick setting menu contains setting items extracted from
custom setting menu which may be used frequently.
1
Press [SETUP] in stop mode.
Use [Y / Z] to select
, then press [ENTER].
1
2
2
3
Use [Y / Z] to select your desired setting category,
Use [Y / Z] to select
, then press [ENTER].
then press [ENTER].
: Language
: Video
: Audio
: Ratings
: Others
• For “Ratings”, follow the procedure on page 36.
Quick
Use [U / V] to select setting items.
• The setting items which are not available with current
situation of this unit will be displayed in gray and you
cannot select the items.
4
Media Select
Disc
BD Audio Mode
HDMI Audio Out
HDMI Video Resolution
Component Output
OSD Language
Mix Audio Output
HDMI Multi(Normal)
Auto
480i
English
30
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
Ⅵ
Video
Ⅵ
Language
Video
Video
Language
TV Aspect
16:9 Wide
YCbCr
Normal
Max
Progressive Mode
Still Mode
Auto
Dialog
Original
Off
HDMI Select
Auto
Subtitle
HDMI RGB Setting
HDMI Auto Format
HDMI Video Resolution
HDMI Deep Color
Component Output
Wall Paper
Picture
Disc Menu
OSD Language
DivX Subtitle
English
English
English
Auto
Auto
480i
• For how to select the setting items and options, refer to “Custom” on page 30.
• For how to select the setting items and options, refer to “Custom” on page 30.
Setting items Options
TV Aspect
Setting items
Options
16:9 Wide*:
Dialog
Sets the language for audio.
Original*/English/French/Spanish/German/Italian/
Swedish/Dutch/Russian/Chinese/Japanese/Korean/
Danish/Finnish/Norwegian/Icelandic/Hungarian/
Romanian/Turkish/Greek/Irish/Portuguese/Polish/
Czech/Slovak/Bulgarian/Other
Sets a picture size according to
aspect ratio of the connected
display device.
Select this when a wide-screen TV is connected.
Disc recorded in wide screen format is played over the
entire screen.
4:3 Pan & Scan:
Select this to play back the disc recorded in wide screen
format with 4:3 TV in the pan & scan mode (with the
sides of the picture cut off). Discs which pan & scan is
not specified are played in the letter box mode.
Subtitle
Sets the language for subtitle.
Off*/English/French/Spanish/German/Italian/Swedish/
Dutch/Russian/Chinese/Japanese/Korean/Danish/
Finnish/Norwegian/Icelandic/Hungarian/Romanian/
Turkish/Greek/Irish/Portuguese/Polish/Czech/Slovak/
Bulgarian/Other
4:3 Letter Box:
Select this to play back the disc recorded in wide screen
format with 4:3 TV in the letter box mode. (with black
strips at the top and bottom).
4:3 Squeeze Auto:
When playing 4:3 images, the picture is displayed in the
center of the 16:9 screen with a 4:3 aspect ratio.
Disc Menu
Sets the language for disc menu.
English*/French/Spanish/German/Italian/Swedish/
Dutch/Russian/Chinese/Japanese/Korean/Danish/
Finnish/Norwegian/Icelandic/Hungarian/Romanian/
Turkish/Greek/Irish/Portuguese/Polish/Czech/Slovak/
Bulgarian/Other
Auto/English*/Français/Español
OSD Language
Sets the language for OSD
(on-screen display).
4:3 Squeeze On:
The picture is displayed in the center of the 16:9 TV
screen with a 4:3 aspect ratio, regardless of the original
image size.
DivX Subtitle
Sets the language for DivX®
Subtitle.
English*/French/Spanish
Select an HDMI output mode
between “YCbCr” and “RGB”.
YCbCr*:
Component format video signals and audio signals are
output from the HDMI OUT.
• Settings with (*) are the default.
• Quick menu consists of the setting menus frequently used, and they are accompanied with
RGB:
mark.
RGB format video signals and audio signals are output
from the HDMI OUT.
• If you select “Other”, enter the 4-digit number code for the desired language (refer to “Language
Code” on page 48). Only the languages supported by the disc can be selected.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
31
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
Setting items
HDMI RGB Setting
Sets the digital RGB image range
(data range) output from the HDMI
OUT.
Options
Setting items
Progressive Mode
Sets the optimum progressive
mode for the image material
output from HDMI OUT jack and
COMPONENT VIDEO OUT jacks.
Options
Auto*:
Normal*:
The progressive mode will detect 24-frame film material
(movies) and automatically select appropriate
progressive mode.
Output as “16 (black)” to “235 (white)”.
Enhanced:
Output as “0 (black)” to “255 (white)”.
Depending on the display device you are using, the
black colors may seem to stand out when using HDMI
connections. If so, set to “Enhanced”.
Video:
Suited for playing video material discs (TV shows or
animation).
Auto*:
Still Mode
Adjusts picture resolution and
quality in still mode.
HDMI Auto Format
Makes the setting of the “Auto” for
“HDMI Video Resolution”.
Max*:
Automatically selects the best resolution setting
(“Frame” or “Field”) based on the data characteristics of
the pictures.
The maximum resolution that can be input to the
connected HDMI device is detected and the HDMI
output resolution is selected automatically.
Field:
Panel:
Stabilizes the pictures, although the picture quality may
become coarse due to the limited amount of data.
Select “Field” when the pictures are still unstable even if
“Auto” is selected.
The number of pixels of the connected HDMI device’s
panel is detected and the HDMI output resolution is
selected automatically.
Auto*:
Frame:
HDMI Video Resolution
HDMI video resolution will be selected automatically
depending on the connected HDMI device and setting
of the “HDMI Auto Format”.
Displays relatively motionless pictures in higher
resolution. “Frame” improves the picture quality,
although it may unstabilize the pictures due to alternate
output of 2-field data.
Sets the HDMI video resolution.
Source Direct:
HDMI video resolution will be set to the recorded
resolution of a playback media.
480i
480p
720p
1080i
1080p
1080p24:
Gives a natural and high quality film reproduction of 24-
frame film material. The connected display device has to
be compatible with 1080p24 frame input.
HDMI Deep Color
Auto*:
Sets whether output the picture
from HDMI with the Deep Color or
not.
The picture through the HDMI will be output with Deep
Color if the connecting device supports Deep Color.
Off:
The picture through the HDMI will be output without
Deep Color.
480i*
480p
720p
1080i
Component Output
Sets the video resolution for
component output.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
: Confirm the setting
: Return to previous menu
buttons
32
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
Setting items
Wall Paper
Sets the picture to be displayed on
the screen for stop mode or audio
playback mode.
Options
Ⅵ
Audio
Picture*
Blue
Black
Gray
Audio
• Quick menu consists of the setting menus frequently used, and they are accompanied with
BD Audio Mode
HDMI Audio Out
Down Sampling
DRC
Mix Audio Output
HDMI Multi(Normal)
mark.
Off
• For “HDMI RGB Setting”, select “Enhanced” if the black-white contrast is not clear. The setting is
effective only for HDMI RGB output.
Auto
• Even if “HDMI Video Resolution” is set to “1080p24”, for the BD that is not recorded by 1080p24
frame or for DVD, a video resolution supported by the disc and the display device will be output
instead of 1080p24 frame.
data characteristics.
• If the picture is not output properly to the display device because of the “HDMI Video
Resolution” or “Component Output” setting, press and hold B on the front panel for more than
5 seconds. Both settings will be reset to the default automatically.
• If “Component Output” is set to “480i”/“480p”, “4:3 Squeeze Auto” and “4:3 Squeeze On” in “TV
Aspect” are not available.
• For how to select the setting items and options, refer to “Custom” on page 30.
Setting items Options
BD Audio Mode
Output the secondary and interactive audio with
For BD, select whether to output
the secondary and interactive
audio with primary audio if it is
available or only the primary
audio. Refer to “Setting the BD
Audio Mode” on page 25.
primary audio if it is available.
• If HDMI is connected, for video resolution for the component output, you can only select video
resolution that currently output from HDMI OUT or 480i.
HD Audio Output:
Output only the primary audio. Set this mode in order to
output Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS or DTS-HD sound of BD through HDMI connection.
video resolution for the component output will be switched to current HDMI output resolution.
COMPONENT VIDEO OUT jacks may not output any signals depend on the disc material.
• If you play back copy-protected DVD-Video, 480p signal will be output from the COMPONENT
VIDEO OUT jacks, when “Component Output” is set to “720p” or “1080i”.
• The setting items which are not available with current situation of this unit will be displayed in
gray and you cannot select the items.
• Even if “HDMI Select” is set to “YCbCr”, if the display device does not support YCbCr, RGB will be
output.
“Component Output”.
HDMI Multi(Normal)*:
The multi-channel audio signals are output from the
HDMI OUT with a bitstream or PCM.
HDMI Audio Out
Sets the audio format for the audio
output from the HDMI OUT.
HDMI Multi(LPCM):
The multi-channel audio signals are output from the
HDMI OUT with a PCM.
• Refer to pages 34-36 for speaker setting options.
HDMI 2ch:
The audio signals are output from the HDMI OUT with a
downmixed to 2ch PCM.
Audio Mute:
Mutes the HDMI audio signal, and set the signal format
of the DIGITAL OUT.
• Refer to the “Digital Out Setting” on page 34 for setting
options.
• The default setting of the “BD Audio Mode” is “Mix Audio Output”. If you want to output only the
high quality primary audio, set “BD Audio Mode” to “HD Audio Output”.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
33
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
Setting items
Down Sampling
Sets the digital audio output when
playing BD or DVD recorded in
PCM.
Options
Bitstream*:
When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD, the corresponding core stream (Dolby Digital or DTS) are output.
On:
PCM signals are converted to 48 kHz for output.
• Set to “On” when using digital connections to an AV
amplifier that is not compatible with sampling
frequencies of 96 kHz.
LPCM:
Full decoded 2ch PCM signal will be output from DIGITAL OUT.
• This setting is not effective when the HDMI audio signal is output.
• When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently
Off*:
For BD or DVD recorded in PCM without copyright
protection, 2-channel audio signals up to 192 kHz are
output as PCM signals with no conversion.
signal will be output from HDMI OUT jack, when connected device does not support Dolby Digital
and DTS.
• When “BD Audio Mode” is set to “Mix Audio Output”, the audio output from DIGITAL OUT will follow
the setting in the “HDMI Audio Out”. (When outputting Multi PCM from HDMI OUT, 2ch Downmix
PCM will be output from DIGITAL OUT.)
DRC
Auto*:
Sets whether to compress the
range of sound volume (Dynamic
Range Control) when Dolby Digital, the disc and set the DRC setting of this unit to “On” or
Dolby Digital Plus or Dolby TrueHD
audio is played back.
When the discs that are recorded in the Dolby TrueHD
format is in playback, this unit detects DRC setting of
• Refer to pages 13 - 14 for more information of audio settings.
“Off” automatically.
Off
Speaker Setting
This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel
surround.
On
<Example of basic layout with 7.1ch surround system>
• Settings with (*) are the default.
• Quick menu consists of the setting menus frequently used, and they are accompanied with
mark.
• Under following circumstances, “HDMI Multi(Normal)”, “HDMI Multi(LPCM)” and “HDMI 2ch” is
not available.
Front speaker (left)
Front speaker (right)
- HDMI cable is not connected to HDMI OUT jack.
- Connected display device is off.
- Connected display device is not compatible with audio output.
Center speaker
Digital Out Setting
Subwoofer
When the “Audio Mute” is selected in “HDMI Audio Out” setting, audio signal of the HDMI is muted
and the audio signals output from DIGITAL OUT changes depending on the “Digital Out” setting.
Surround speaker (left)
Surround speaker (right)
<“Digital Out” setting>
Audio A HDMI Audio Out A Audio Mute
Surround back speaker (left)
Surround back speaker (right)
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
34
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
To make the most of its feature, set up your speakers appropriately by referring to the table below.
Speaker setting options are available in SETUP A Quick A HDMI Audio Out A HDMI Multi(LPCM) or
SETUP A Custom A Audio A HDMI Audio Out A HDMI Multi(LPCM)
• For “Speaker Configuration” setting, the settings of each speaker size may be adjusted
automatically corresponding to each setting. (e.g. If “Front” is set to “Small”, you cannot set
“Center”, “Surround” and “Surround Back” to “Large”.)
Menu
Setting items
Test Tone:
“Test Tone” is the test
tone which can be
output from the
speakers so that you
can adjust the volume
for each speaker.
Options
Off*
Descriptions
How to navigate through the “HDMI Multi(LPCM)” setting
1) Use [U / V] to select the menu item.
Channel Level
Tests or sets the
volume for each
speaker.
Select “Off” to deactivate
the “Test Tone” feature.
Select “Manual”, then
press [ENTER] to manually
set the volume for the
desired speaker.
Select “Auto”,then press
[ENTER] to automatically
output the test tone from
each speaker.
2) Use [U / V] to select setting items.
3) Use [Y / Z] to select desired options.(Except for “Test Tone” and “Default”.)
Manual
Auto
For “Test Tone”:
Use [Y / Z] to select “Manual” or “Auto”, then press [ENTER].
• The test tone will be output. If you select “Manual”, use [U / V] to select desired speaker, then use
[Y / Z] to adjust the volume. If you select “Auto”, use [Y / Z] to adjust the volume of the speaker
that output the test tone.
• If you want to stop the test tone, press [RETURN].
For “Default”:
Front Lch
0 dB to -12 dB If you have selected
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
Press [ENTER] to reset the “Speaker Configuration”, “Channel Level” or “Delay Time”
“Manual” in “Test Tone”,
select the desired speaker
to set and adjust the
volume for the selected
speaker.
If you have selected
“Auto” in “Test Tone”, test
tone will be output
automatically in order.
Adjust the volume of the
speaker that output the
test tone.
setting to the default.
Center
4) Press [SETUP] to exit.
Menu
Setting items
Front
Options
Large*
Descriptions
Front Rch
Speaker Configuration
Select the desired
speaker to set. Then
change the setting
appropriately by
referring to the
Large:
For the large speakers
with strong low frequency
reproduction capabilities.
Small:
For the small speakers
which do not provide
strong bass sound.
You cannot change the
setting of “Subwoofer”.
If connected device is not
compatible with
subwoofer, “Subwoofer”
will be displayed in gray.
Surround Rch
Surround Back Rch
Surround Back Lch
Surround Lch
Subwoofer
Small
Large*
Small
On*
Center
descriptions.
Subwoofer
Surround
Large*
Small
Large*
Small
0 dB to -12 dB
(0 dB*)
Surround Back
Default
Default
Select “Default”, then
press [ENTER] to reset the
“Channel Level” setting to
the default.
Select “Default”, then
press [ENTER] to reset the
“Speaker Configuration”
setting to the default.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
35
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
Ⅵ
Ratings
Menu
Delay Time
Setting items
Distance
Options
Feet*
Descriptions
Ratings control allows you to set a limit, which prevents your children from viewing inappropriate
materials. Playback will stop if the ratings exceed the levels you set, and it will require you to enter a
password before the disc will play back.
Set the desired measure
system. This measure system
will be used for “Delay Time”
setting. Press [ENTER] to
switch the setting.
This is a parameter
for optimizing the
timing at which the
sound is output from
the speakers
according to their
distance from the
listening position.
Meters
Front
0ft to 60ft (12ft*) Select the distance from the
(0m to 18m
(3.6m*))
0ft to 60ft (12ft*)
(0m to 18m
(3.6m*))
listening point to the
speaker to get the ideal
delay time.
Ratings
Center
BD Rating Level
DVD Rating Level
Password Change
All
All
Surround
Surround Back
Default
0ft to 60ft (10ft*)
(0m to 18m
(3.0m*))
0ft to 60ft (10ft*)
(0m to 18m
(3.0m*))
1) Use [Y / Z] to select
2) Press [the Number buttons] to enter your 4-digit password.
, then press [ENTER].
Select “Default”, then press
[ENTER], to reset the “Delay
Time” setting to the default.
For the first time use: Press [the Number buttons] to enter any 4-digit number (except for 4737),
then press [ENTER]. That number will be used as the password from the second time. Record your
password in case you forget it.
• Settings with (*) are the default.
• If you forgot the password, enter [4], [7], [3], [7]. The password will be cleared and rating level
will be set to “All”.
• For “Delay Time”, the difference between the value of the “Front”, “Surround” and “Surround
Back” setting cannot exceed 15 ft (4.5m), and the difference between the value of the “Front”
and “Center” setting cannot exceed 5 ft (1.5m).
• While you input the password, press [CLEAR] to clear the number, then re-enter the password.
• For “Delay Time”, the value of the “Center”, “Surround” and “Surround Back” setting cannot
exceed the value of the “Front” setting.
• For “Delay Time”, the setting of “Center”, “Surround” and “Surround Back” will be changed
automatically to the setting value of the “Front”. (e.g. If the “Front” is set to 60ft (18m), the setting
of “Center”, “Surround” and “Surround Back” will be changed to 60ft (18m) as well.)
• If you want to stop the test tone, press [RETURN].
Proceed to A – C
A) BD Rating Level
1) Use [U / V] to select “BD Rating Level”, then press [ENTER].
2) Use [U / V] to select your desired option, then press [ENTER].
“All”
: To release the limitation.
“Age Setting”: To set the age limitation.
• After selecting “Age Setting”, use [the Number buttons] to enter the age from 0 – 254.
(e.g. for age 15, press [0],[1],[5])
3) Press [SETUP] to exit.
B) DVD Rating Level
1) Use [U / V] to select “DVD Rating Level”, then press [ENTER].
2) Use [U / V] to select a desired level, then press [ENTER].
3) Press [SETUP] to exit.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
36
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
Setting items
Angle Icon
Options
Description
RATING EXPLANATIONS
• All
• 8 [Adult]
: Parental control is inactive; all discs can play back.
: DVD software of any grades (adult/general/children) can be played
back.
On
Off*
On:
The angle icon appears on the
screen when playback the scene
with various angle.
• 7 [NC-17]
• 6 [R]
• 5 [PGR]
• 4 [PG13]
• 3 [PG]
• 2 [G]
: No one under 17 admitted.
: Restricted; under 17 requires accompanying parent or adult guardian.
: Parental guidance recommended.
: Unsuitable for children under 13.
: Parental guidance suggested.
: General audience.
Off:
The angle icon disappears on the
screen.
On:
Screen Saver
On*
Off
If this unit is left with no activity
for more than 5 minutes, the
screen saver will be activated.
• 1 [Kid Safe] : Suitable for children.
C) Password Change
Off:
2) Enter a new 4-digit password, then press [ENTER].
3) Press [SETUP] to exit.
Sets off the screen saver.
On:
If this unit is left with no activity
for more than 30 minutes, this
unit turns to the standby mode
automatically.
Auto Power Off
On*
Off
Ⅵ
Others
Off:
Sets off the auto power off.
Panel Display
Sets the brightness of the
front panel display.
Bright*
Dimmer
Auto
Bright:
Others
Others
Front panel display gets brighter.
Dimmer:
Front panel display gets darker.
Auto:
Front panel display gets darker
during playback.
Remote Control Setting
HDMI CEC
BD1
Angle Icon
Off
On
Screen Saver
Auto Power Off
Panel Display
Slide Show
On
Media Select
Disc
On
Network Connection
Network Update
Enable(Easy)
Bright
5sec
DivX(R) VOD
Off
Slide Show
5sec*
10sec
Sets the display time for
the still picture (in JPEG
format) playback.
• For how to select the setting items and options, refer to “Custom” on page 30.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
37
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
Setting items
DivX(R) VOD
Options
Registration Code
Your registration code is:
cccccccccc
To learn more visit
Description
Setting items
HDMI CEC
Sets whether to utilize
the HDMI CEC function.
Options
Description
This menu item provides you with
the DivX® VOD registration code.
The DivX® registration code is
required when downloading the
DivX® VOD files from the Internet.
To learn more about DivX® VOD,
On*
Off
Disc*
SD Card
Disc:
Media Select
Select this when you play back a
Select the media to
playback.
disc.
SD Card:
Deactivation Code
Your deactivation code is:
cccccccc
To learn more visit
This menu item provides you with
the DivX® VOD deactivation code.
The DivX® deactivation code is
required when re-downloading
the DivX® VOD files from the
Internet after deactivating. To
learn more about DivX® VOD, visit
This menu deactivates the
DivX® VOD files and provides you
with new registration code and
deactivation code in order to
download the DivX® VOD files
from the Internet.
Select this when you play back a
SD Memory Card.
Network Connection
Refer to “Network
Connection” on page 39
for more details of each
setting.
Connection Test
Enable(Easy)*
Perform the network connection
test to check if the network
settings are correctly made.
Set all the network settings to the
default settings. (In most cases,
you can connect to the Internet
without making any changes to
the default settings.)
Set the network settings manually
in accordance with your network
environment, if necessary.
Deactivate the network
connection.
Deactivation
Yes
No*
Enable(Custom)
Disable
Closed Caption
On
Sets whether to display
the closed caption or not
using the caption decoder
(commercially available ).
Off*
Network Update
Refer to “Network
Update” on page 41 for
more detail.
Yes
No*
You can update the firmware
version by connecting this unit to
the Internet.
Remote Control Setting
Changes the signal code
of a remote control. (Refer
to page 6.)
BD1*
BD2
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
38
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
If you want to set the network settings back to the default settings as above (except “BD-Live
Network Connection
Setting”), follow the procedure below.
1) Follow steps 1) to 4) in “Connection Test” on this page.
2) Use [U / V] to select “Enable(Easy)”, then press [ENTER].
Connection Test
• The unit will start the connection test automatically and the test result will appear right after the
test finishes.
• After the connection test finishes, press [ENTER] to go to network status confirmation screen.
3) Press [ENTER] to activate the network settings and set the network connection
automatically. Press [SETUP] to exit.
After you made IP address/DNS settings or when a LAN cable is connected, always perform the
connection test to check if the connection is correctly made.
2) Use [Y / Z] to select
, then press [ENTER].
3) Use [Y / Z] to select
, then press [ENTER].
4) Use [U / V] to select “Network Connection”, then press [ENTER].
5) Use [U / V] to select “Connection Test”, then press [ENTER].
Connection test will start automatically and the test result will appear right after the connection test
finishes.
Note
• The setting of “BD-Live Setting” will not be set back to the default, even if you follow the
procedure.
• “Testing...” : The test is in progress.
Enable(Custom)
• “Pass”
• “Fail”
: Connection test failed. Check the connection settings.
If you need to set specific settings manually in accordance with your network environment, select
“Enable(Custom)” to set each setting as necessary.
Press [ENTER] to go to the list of network status confirmation screen.
ⅥIP Address Setting
1) Follow steps 1) to 4) in “Connection Test” on this page.
2) Use [U / V] to select “Enable(Custom)”, then press [ENTER].
3) Use [U / V] to select “IP Address Setting”.
Connection Test
IP Address
∗∗∗
∗∗∗
∗∗∗
∗∗∗
.
.
.
.
.
∗∗∗
∗∗∗
∗∗∗
∗∗∗
∗∗∗
.
.
.
.
.
∗∗∗
∗∗∗
∗∗∗
∗∗∗
∗∗∗
.
.
.
.
.
∗∗∗
∗∗∗
∗∗∗
∗∗∗
∗∗∗
Subnet Mask
4) Press [ENTER] repeatedly to select the desired setting.
“Auto(DHCP)” : If your router has DHCP server function, select “Auto(DHCP)”.
Default Gateway
Primary DNS
Secondary DNS
“Manual”
: If your router does not have DHCP server function, select “Manual”.
then press ‘ENTER’.
If you select “Manual”, follow the following instruction to set the IP address.
Use [U / V] to select “IP Address”, then press [ENTER].
• IP address setting screen will appear. Enter IP address, subnet mask and default gateway with
[U / V / Y / Z] and [the Number buttons].
6) Press [ENTER] to go back to the previous screen or press [SETUP] to exit.
Note
• If the connection test passes, you can enjoy the BD-Live functions using the Internet without
IP Address Setting
• If the connection test fails, you may need to change the MAC address settings of your router.
You can check the MAC address of this unit at the bottom of the “Enable(Custom)” screen.
IP Address
∗∗∗
.
.
.
∗∗∗
.
.
.
∗∗∗
.
.
.
∗∗∗
Subnet Mask
∗∗∗
∗∗∗
∗∗∗
∗∗∗
∗∗∗
∗∗∗
∗∗∗
∗∗∗
Default Gateway
then press ‘ENTER’.
Enable(Easy)
Network settings are set to the following settings initially. (In most cases, you can connect to the
Internet without making any changes to the default settings.)
• Enter the IP address number after checking the specifications of your router.
• If the IP address number is unknown, check the IP address number of other devices.
(e.g. PC connected via LAN cable) and assign a different number from those of other devices.
After you enter all correctly, press [ENTER].
- IP Address Setting
- DNS Setting
- Proxy Setting
- Connection Speed
- BD-Live Setting
Auto(DHCP)
Auto(DHCP)
Do Not Use
Auto
• Confirmation message will appear.
Allow
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
39
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
ⅥProxy Setting
1) Follow steps 1) to 2) in “IP Address Setting” on page 39.
2) Use [U / V] to select “Proxy Setting”.
IP Address Setting
3) Press [ENTER] repeatedly to select the desired setting.
• For default settings, select “Do Not Use”.
Is Setting OK?
IP Address
∗∗∗
∗∗∗
∗∗∗
.
.
.
∗∗∗
∗∗∗
∗∗∗
.
.
.
∗∗∗
∗∗∗
∗∗∗
.
.
.
∗∗∗
∗∗∗
∗∗∗
Subnet Mask
Default Gateway
• Please use this setting when instructed by your Internet service provider.
If you select “Use”, follow the following instruction to set the proxy address and proxy port.
No
Yes
Proxy Address
Use [U / V] to select “Proxy Address”, then press [ENTER].
Enter proxy address.
• The keyboard screen will appear.
Use [U / V] to select “Yes”, then press [ENTER] to complete the setting.
5) Press [SETUP] to exit.
ⅥDNS Setting
1) Follow steps 1) to 2) in “IP Address Setting” on page 39.
2) Use [U / V] to select “DNS Setting”.
Proxy Address
3) Press [ENTER] repeatedly to select the desired setting.
“Auto(DHCP)” : If your router has DHCP server function select “Auto(DHCP)”.
∗∗∗∗∗∗∗∗∗∗∗∗_
1
a
k
2
b
l
3
4
d
n
x
5
e
o
y
6
f
7
g
q
.
8
h
r
9
i
0
c
j
t
“Manual”
: If your router does not have DHCP server function, select “Manual”.
m
w
p
z
s
_
If you select “Manual”, follow the following instruction to set the DNS.
u
v
-
OK
Use [U / V] to select “Primary DNS”, then press [ENTER].
Clear
All Clear
a/A/@
OK
• DNS setting screen will appear. Enter primary DNS and secondary DNS with [U / V / Y / Z]
and [the Number buttons].
[U / V / Y / Z] : Move the highlight.
[the Number buttons] : Enter number.
[ENTER] : Enter the highlighted number/word.
DNS Setting
[RED] : Clear the entered number or word.
[GRN] : Clear all the entered numbers or words.
[BLU] : Switch between abc ? ABC ? @!?
[YEL] : Set the entered number or word.
Primary DNS
∗∗∗
∗∗∗
.
.
∗∗∗
∗∗∗
.
.
∗∗∗
∗∗∗
.
.
∗∗∗
∗∗∗
Secondary DNS
then press ‘ENTER’.
After you enter all correctly, press [YEL].
• Confirmation message will appear.
• Enter the numbers instructed by your Internet provider.
• If the number is unknown, check the number of other devices (e.g. PC connected via LAN
cable) and assign the same number.
Proxy Address
After you enter all correctly, press [ENTER].
Is Setting OK?
************
• Confirmation message will appear.
No
DNS Setting
Yes
Is Setting OK?
Primary DNS
∗∗∗
∗∗∗
.
.
∗∗∗
∗∗∗
.
.
∗∗∗
∗∗∗
.
.
∗∗∗
∗∗∗
Use [U / V] to select “Yes”, then press [ENTER] to complete the setting and go back to the
Secondary DNS
proxy setting screen.
No
Yes
Use [U / V] to select “Yes”, then press [ENTER] to complete the setting.
4) Press [SETUP] to exit.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
40
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
“10BASE Full” : Set the connection speed to “10BASE Full”.
“100BASE Half” : Set the connection speed to “100BASE Half”.
Proxy Port
Use [U / V] to select “Proxy Port”, then press [ENTER].
• Proxy port setting screen will appear.
Enter proxy port number with [the Number buttons].
4) Press [RETURN] to go back to previous screen, or press [SETUP] to exit.
ⅥBD-Live Setting
Proxy Port
You can limit the Internet access from the BD-Live functions. (The default setting is “Allow”.)
Please select the input Proxy Port.
then press ‘ENTER’.
1) Follow steps 1) to 2) in “IP Address Setting” on page 39.
2) Use [U / V] to select “BD-Live Setting”, then press [ENTER].
3) Use [U / V] to select the desired setting, then press [ENTER].
∗∗∗∗∗
“Allow” : Internet access is permitted from all BD-Live contents.
“Limited Allow” : Internet access is permitted only for BD-Live contents which have content
owner certificates. Internet access without the certificates are prohibited.
After you enter all correctly, press [ENTER] to complete the setting.
4) Press [RETURN] to go back to previous screen, or press [SETUP] to exit.
Note
For IP Address Settings and DNS Settings:
Disable
• The range of input number is between 0 and 255.
You can deactivate all the network connection and settings by following the instructions below.
1) Follow steps 1) to 4) in “Connection Test” on page 39.
2) Use [U / V] to select “Disable”, then press [ENTER].
3) Press [RETURN] to go back to previous screen, or press [SETUP] to exit.
• If you enter a number larger than 255, the number will automatically be 255.
• The manually entered number will be saved even if you change the setting to “Auto(DHCP)”.
• When you enter a wrong number, press [CLEAR] to cancel. (The number will be back to “0”.)
• If the entered IP address or the default gateway or primary DNS number is same as the default
setting, IP address setting will be set to “Auto(DHCP)”. (The manually entered number will be
saved.)
• When IP address setting is set to “Manual”, the setting of DNS setting will automatically be
“Manual” and when IP address setting is set to “Auto(DHCP)”, you can set either “Auto(DHCP)” or
“Manual” for DNS setting.
Note
or “Enable(Custom)”.
Network Update
For Proxy Settings:
You can update the software by connecting the unit to the Internet.
1) Follow steps 1) to 3) in “Connection Test” on page 39.
2) Use [U / V] to select “Network Update”, then press [ENTER].
• Confirmation message will appear.
3) Use [U / V] to select “Yes”, then press [ENTER].
number larger than 65535, it will be regarded as 65535.)
network.
• This unit will start checking for the latest firmware version.
4) Confirmation message will appear.
ⅥConnection Speed
Use [U / V] to select “Yes”, then press [ENTER].
You can set connection speed as your preference. (The default setting is “Auto”.)
• The unit will start downloading the latest firmware version.
5) When the download completes, confirmation message will appear.
Press [ENTER].
1) Follow steps 1) to 2) in “IP Address Setting” on page 39.
2) Use [U / V] to select “Connection Speed”, then press [ENTER].
3) Use [U / V] to select the desired setting, then press [ENTER].
• The unit will start updating the firmware version.
“Auto” : Set the appropriate connection speed automatically, in accordance with your
network environment.
“10BASE Half” : Set the connection speed to “10BASE Half”.
• It may take a while to complete the updating. (Please wait until “100%” appears on the front
panel display.)
6) After updating finishes, this unit will restart and open the disc tray automatically.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
41
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Function Setup
Function Setup
Setting items
Erase Saved BD-ROM
Data (SD Card)
Options
Description
Note
Yes
No*
Yes:
• Please do not unplug the AC cord or LAN cable while executing the “Network Update”.
• All settings will remain the same even if you update the firmware version.
• The disc tray will open automatically after updating finishes. This is not a malfunction.
Re-format BD-ROM Data (SD Card)
used for BD-Java.
No:
Does not perform the initialization.
Network Settings
Yes
No*
Yes:
Initialize
Initialize all the network settings.
No:
Initialize the setting or SD Memory Card.
Does not perform the initialization.
1) Press [SETUP] in stop mode.
Initialize
2) Use [Y / Z] to select
, then press [ENTER].
3) Use [U / V] to select a desired option, then press [ENTER].
Setup
“Setup”
: All the settings except for the “Ratings” and “Network
Connection” setting will be reset to default.
: Initialize the SD Memory Card.
Format SD Card
Erase Saved BD-ROM Data (Player)
Erase Saved BD-ROM Data (SD Card)
Network Settings
“Format SD Card”
“Erase Saved BD-ROM Data (Player)” : BD-ROM data for Player used for BD-Java will be
initialized.
“Erase Saved BD-ROM Data (SD Card)” : BD-ROM data for SD Card (available only when an SD
Memory Card is inserted) used for BD-Java will be
initialized.
• For how to select the setting items and options, refer to “Custom” on page 30.
“Network Settings”
: Reset the network setting to the default.
Setting items
Setup
Options
Description
4) Confirmation message will appear. Use [U / V] to select “Yes”, then press [ENTER].
5) Press [SETUP] to exit.
Yes
Yes:
No*
Resets all settings in setup, except
for “Ratings” and “Network
Note
Connection”, to the factory default.
• Do not remove the SD Memory Card while executing the “Format SD Card” or “Erase Saved BD-
ROM Data (SD Card)”. It will damage the card.
No:
• “Format SD Card” and “Erase Saved BD-ROM Data (SD Card)” are not available when a Blu-ray
Disc is in the unit.
Does not perform the initialization.
Yes:
Format SD Card
Yes
No*
Re-format SD Card.
No:
Does not perform the initialization.
Erase Saved BD-ROM
Data (Player)
Yes
No*
Yes:
Re-format BD-ROM Data (Player)
used for BD-Java.
No:
Does not perform the initialization.
:
:
Displaying the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Remote control operation
buttons
: Confirm the setting
: Return to previous menu
42
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Others
Trademark Information
Explanation of Terms
Numerics
4:3 Letter Box
When a wide (16 : 9) disc is played back by connecting a 4 : 3 TV
and the BD5004, this function plays back the image with black
area at the top and bottom.
DivX®, DivX Certified®, and associated logos are trademarks of
DivX, Inc. and are used under license.
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
4:3 Pan-and-Scan
When a wide (16 : 9) disc is played back by connecting a 4 : 3 TV
and the BD5004, this function cuts left and right of the played
back image to the 4 : 3 size according to the disc’s control
information.
Manufactured under license under U.S. Patent #’s: 5,451,942;
7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide
patents issued & pending. DTS is a registered trademark and the
DTS logos, Symbol, DTS-HD and DTS-HD Master Audio | Essential
are trademarks of DTS, Inc. ©1996-2008 DTS, Inc. All Rights
Reserved.
Windows Media and the Windows logo are trademarks or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
A
Analog Audio
An electrical signal that directly represents sound. Compare this to
digital audio which can be an electrical signal, but is an indirect
representation of sound. See also “Digital Audio”.
“BONUSVIEW” is a trademark of Blu-ray Disc Association.
Aspect Ratio
This is the length and width ratio of the TV screen. The
conventional TV’s screen ratio is 4 : 3 and the wide screen TV’s
screen ratio is 16 : 9.
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC.
“BD-LIVE” logo is trademark of Blu-ray Disc Association.
AVCHD
“Blu-ray Disc” and
are trademarks.
AVCHD is a new format for high definition video camcorders
which can record and play high-resolution HD images.
“x.v.Color” and the “x.v.Color” logo are trademarks of Sony
Corporation.
is a trademark of DVD Format/Logo Licensing Corporation.
B
is trademark of Eastman Kodak Company.
BD-J (Java)
With BD-Videos, there are fun software with more interactive
functions (games) using Java applications.
BD-Live
BD-Live is a BD-Video (BD-ROM version 2 Profile 2.0) which
contains new functions (e.g. Internet connection), in addition to
the BONUSVIEW function.
Java and all other trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the United
States and/or other countries.
Bit Rate
This expresses the read amount per 1 second of video/audio data
recorded in a disc.
Blu-ray Disc
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic
Corporation and Sony Corporation.
This is one-side 1 layer disc having 25GB capacity and can record
high vision video movie and games.
43
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Others
BONUSVIEW
Others
Dolby Digital Plus
HDMI
Special images for BD-Videos. It includes comment of the movie
director, simultaneously developing sub-story, and images from
different angles.
This is an extension version of Dolby Digital and is a high sound
quality digital audio technology adopted as an optional audio for
Blu-ray disc.
This is an abbreviation of High-Definition Multimedia Interface,
which is an AV digital interface that can be connected to a TV or
amplifier. Video signal and audio signal can be connected using 1
cable.
Hub
Dolby TrueHD
C
This lossless coding technology is adopted as optional audio for
Blu-ray disc and supports 7.1 channels.
A device used for connecting multiple devices to the network.
Chapter
This is a break intended by a producer who organizes the title of
BD or DVD-Video. The chapter search function searches the
beginning of this break.
Downmix
I
This function converts the number of channels of surround audio
to less number of channels and plays back.
DTS
This is an abbreviation of Digital Theater System, which is a digital
audio system developed by DTS. When playing back audio by
connecting this system with a device such as DTS amplifier,
accurate sound field position and realistic sound effect as if you
are in a movie theater can be obtained.
Interactive Audio
Audio such as click sound that is generated during operation and
is recorded in the title of BD-Videos.
Interlacing (interlaced scanning)
This conventional method used to project images on a TV displays
1 frame of image in half and half, respectively as 2 fields.
Component Video Output
Each signal of luminance (Y) and component (PB/CB, PR/CR) is
independent to output so that you can experience picture color as
it is. Also, due to compatibility with progressive video (525p/
480p), you can experience higher-density picture than that in
interlace (525i/480i).
IP Address
DTS-HD
D
A set of numbers which are assigned to devices participating in a
computer network.
This audio technology provides higher sound quality and
enhanced functionality than the conventional DTS and is adopted
as an optional audio for Blu-ray disc. This technology supports
multi-channel, high data transfer speed, high sampling frequency,
and lossless audio playback. Maximum 7.1 channels are supported
in Blu-ray disc.
Deep Color
J
This technology allows expression of more number of colors than
the conventional 8 bits and can reproduce colors close to natural
ones without color streak.
DHCP (Dynamic Host Configuration Protocol)
This mechanism automatically perform network configuration
such as IP address for network devices including BD5004, PC, and
broadband router.
JPEG (Joint Photographic Experts Group)
JPEG is a method of compressing still picture files. You can copy
JPEG files on disc or SD Memory Card from a computer and play
back the files on this unit.
Dynamic Range
The difference between the maximum undistorted sound level
and the minimum sound level that is discernible above the noise
L
Digital Audio
LAN (Local Area Network)
A group of computer networks covering a small area like a
company, school or home.
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals (44,100
times a second for CD audio) by an analog-to-digital converter,
generating a stream of numbers. On playback, a digital-to-analog
converter generates an analog signal based on these numbers.
See also “Sampling Frequency” and “Analog Audio”.
F
Finalize
Linear PCM
This is processing that enables playing back of disc of BD/DVD/CD,
which was recorded using a recorder, by other players.
This signal is uncompressed PCM (Pulse Code Modulation) signal.
This is the same system as the CD audio but this uses 192kHz,
96kHz, and 48kHz sampling frequencies in BD or DVD and
provides higher sound quality than CD.
G
DivX®
DivX® is a codec (compression/decompression) that can compress
pictures to a very small amount of data. The software can
compress video data from almost any devices to the size that can
be sent on the Internet without compromising visual quality of
the pictures.
Gateway
Local Storage
IP address of the electronic devices (such as router) which provide
Internet access.
A storage area of sub contents for playing virtual packages on
BD-Video.
H
M
DNS Server
HDCP
MPEG
A server which translates Internet domain names into IP
addresses.
Dolby Digital (5.1ch Surround)
This is a stereophonic effect developed by Dolby Laboratories.
This is maximum 5.1 channels of independent multi-channel
audio system.
When transmitting digital signals between devices, this copyright
protection technology encrypts the signals to prevent content
from being copied without authorization.
This is an abbreviation of Moving Picture Experts Group, which is
an international standard of the moving picture audio
compression method. Images of BD and DVD are recorded using
this method.
44
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Others
Others
P
S
PCM (Pulse Code Modulation)
Sampling Frequency
The most common system of encoding digital audio, found on CD The rate which sound is measured by a specified interval to turn
and DAT. Excellent quality, but requires a lot of data compared to
formats such as Dolby Digital and MPEG audio. For compatibility
with digital inputs, this unit can convert Dolby Digital and MPEG
audio to PCM. See also “Digital Audio”.
into digital audio data. The numbers of sampling in one second
defines as sampling frequency. The higher the rate, the better the
sound quality.
Secondary Audio
The audio signals recorded in the BONUSVIEW of BD-Video.
(e.g. Comment of movie director)
Picture-in-Picture
This BD-Video function allows you to view making or commentary
scenes in the secondary video while viewing the main story in the
primary video.
Subnet Mask
A mask which is used to determine what subnet an IP address
belongs to.
Popup Menu
T
menu can be displayed on the front of the screen and can be
operated.
Primary Audio
This audio signal is recorded in the main story in BD-Video.
Title
This is the unit of content that consists of chapters of BD or DVD-
Video. Some BD or DVD-Video may include multiple titles.
V
Progressive (sequential scanning)
This is a scanning system of video signal that displays 1 frame of
provides images with less flickering and bleeding.
Virtual Package
The function which copies data to other media (local storage)
from the Internet and play the secondary video, secondary audio
and the subtitle at the same time. The method of the playback
varies depending on discs.
Proxy Server
Proxy server is a server which acts as an intermediary between a
workstation user and the Internet to ensure security.
W
R
Windows Media™ Audio
Windows Media™ Audio is the audio compressing technology
developed by Microsoft. You can copy Windows Media™ Audio
files on disc or SD Memory Card from a computer and play them
back on this unit.
Rating
Depending on the age of the viewer, this function restricts playing
back of BD-Video or DVD-Video. BD5004 can be set to restrict
viewing in 1 to 254 level for BD-Video, and 1 to 8 level for DVD-
Video.
X
Region Code
x.v.Color
This code indicates country or region where the BD or DVD-Video
can be played back.
Router
A networking device which distinguishes the IP address assigned
to each device and routing and forwarding information in the
computer network.
“x.v.Color” is a promotion name given to the products that have
the capability to realize a wide color space based on the xvYCC
specifications and is a trademark of Sony Corporation.
45
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Others
Others
Index
Playback (Kodak Picture CD) ................................................................... 28
Playback (SD Card) ............................................................................... 28, 29
Popup menu .......................................................................................9, 18, 45
Program playback ....................................................................................... 20
Progressive .......................................................................................13, 32, 45
Pure direct mode .................................................................................. 10, 25
) A
page
) F
page
A-B Repeat ................................................................................................. 8, 20
AC cord ....................................................................................................... 3, 16
Angle .................................................................................................... 8, 22, 37
Aspect ratio .............................................................................................31, 43
Audio language ............................................................................................24
Audio signal .....................................................................................13, 14, 34
Audio stream/channel ...............................................................................24
AVCHD .................................................................................3, 4, 5, 13, 14, 43
Fast forward ......................................................................................... 8, 9, 19
Fast reverse ........................................................................................... 8, 9, 19
Format ..................................................................... 4, 13, 14, 27, 32, 33, 34
) H
page
) R
page
HDMI cable ................................................................................................7, 12
HDMI Deep Color ................................................................................. 32, 44
HDMI resolution .......................................................................................7, 13
Random playback ....................................................................................8, 21
RCA audio cable ...........................................................................3, 7, 12, 15
RCA video cable ..................................................................................3, 7, 12
Region code ...............................................................................................5, 45
Remote control ............................................................................... 6, 7, 8, 38
Repeat playback .......................................................................................8, 20
Resume playback ......................................................................................... 18
) I
page
) B
page
Initialize ............................................................................................................42
Interactive audio ............................................................................ 25, 33, 44
Interlace ............................................................................................ 13, 32, 44
BD audio mode ......................................................................................25, 33
BD-Live ...................................................................................3, 15, 29, 41, 43
BD-Video .........................................................................................4, 5, 13, 14
Brightness ........................................................................................... 9, 26, 37
) J
JPEG ........................................................................ 3, 4, 5, 26, 27, 28, 37, 44
) L page
page
) S
page
) C
page
SD Card ..............................................................................4, 7, 28, 29, 38, 42
Sharpness ....................................................................................................... 26
Slow forward .............................................................................................9, 19
Source Direct ...................................................................................10, 13, 32
Speaker setting ...............................................................................34, 35, 36
Step by step playback ................................................................................ 19
Subtitle language ........................................................................................ 25
Supplied accessories .....................................................................................3
CD-DA ................................................................................................................ 4
CD-RW/-R ......................................................................................................4, 5
Channel level .................................................................................................35
Chapter ..................................................................................5, 20, 22, 23, 44
Component video cable ....................................................................... 7, 12
Connections .......................................... 11, 12, 14, 15, 16, 38, 39, 40, 41
LAN cable ...................................................................................................7, 15
Language code ..................................................................................... 31, 48
) M
page
Marker ..............................................................................................................22
MP3 ................................................................................ 3, 4, 5, 13, 14, 26, 27
) D
page
) T
page
Dialog speed ..................................................................................................19
Dimmer ....................................................................................................... 9, 37
Disc menu ........................................................................................... 9, 18, 31
DivX® ........................................................ 3, 4, 5, 13, 14, 26, 27, 28, 31, 44
DivX® VOD ...............................................................................................27, 38
Dolby Digital .............................................................. 13, 14, 25, 33, 34, 44
Dolby Digital Plus .................................................... 13, 14, 25, 33, 34, 44
Dolby TrueHD ............................................................ 13, 14, 25, 33, 34, 44
DRC (Dynamic Range Control) ........................................................... 3, 34
DTS ......................................................................... 13, 14, 25, 33, 34, 43, 44
DTS-CD .............................................................................................4, 5, 13, 14
DTS-HD ................................................................. 13, 14, 25, 33, 34, 43, 44
DVD-RW/-R ............................................................................................4, 5, 18
DVD-Video ......................................................................................4, 5, 13, 14
page
Title .................................................................................. 5, 18, 20, 22, 23, 45
Top menu ..........................................................................................................8
Track .............................................................................................. 5, 20, 22, 23
Network update .................................................................................... 38, 41
Noise reduction .............................................................................................26
) O
On-screen display .............................................................................. 3, 8, 23
) P page
page
) V
Virtual surround ........................................................................................... 25
) W page
) X page
x.v.Color ...............................................................................................3, 43, 45
) Z page
Zoom ............................................................................................................8, 21
page
Parental .................................................................................................... 36, 37
Password ................................................................................................. 36, 37
Pause ...................................................................................................7, 8, 9, 18
Picture Adjustment ......................................................................................26
Picture control .................................................................................................3
Playback (BD/DVD/AVCHD) ................................................ 17, 18, 19, 20
Playback (DivX®/MP3/WMA/JPEG) ............................ 19, 20, 21, 26, 27
Playback (DVD-RW/-R) ........................................................................ 18, 21
46
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Others
Others
Troubleshooting
If the unit does not perform properly when operated as instructed in this user guide, check the unit, consulting the following checklist.
Problem
Solution
Page
Problem
Solution
Page
No power
- Check if the AC cord is properly connected.
- Unplug the AC cord once, and wait for 5-10 seconds and then plug it
in again.
–
–
stops responding
- To completely reset the unit, unplug the AC cord from the AC outlet
for 5-10 seconds.
–
operating commands during
playback
17
No sound or picture
- Check if the connected display device is turned on.
- Check the HDMI connection. (Check the status of the HDMI related
indications.)
- Check the RCA audio/video cable connections.
- Check if the pure direct mode is set to “VideoOff” or “All Off”. If it is
the case, set it to “Disp.Off” or “Normal”.
- Check whether the connected display device or other device
supports HDCP. (This unit will not output a video signal unless the
other device supports HDCP.)
- Check whether the output format of this unit (HDMI FORMAT)
matches the supported input format of other connected device.
- Check if the “HDMI Deep Color” is set to “Auto”. If it is the case, set it
to “Off”.
–
12
Refer to the instructions of the disc.
The unit cannot read BD/DVD/CD - Condensation? (Let sit 1 or 2 hours)
2
4
12, 15
25
marks on page 4.
- Wipe the dirt off the disc or replace the disc.
3
14
Angle does not switch
- The angle cannot be switched for BD/DVD which do not contain
multiple angles. In some cases multiple angles are only recorded for
specific scenes.
22
12, 31, 32
32
Playback does not start when the - Check the “Ratings” setting.
title is selected
36
36
The password for rating level has - Enter the default password “4737”, then your forgotten password will
been forgotten
Distorted picture
- Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
- Connect this unit directly to the TV. If the RCA audio/video cables are
connected to a VCR, pictures may be distorted due to the copy
protection system.
–
be cleared.
12
- Check if the LAN cable connection is properly made.
- Turn on the modem or broadband router.
- Check the network settings.
- Check if the broadband router and/or modem is correctly connected.
- Check the “BD-Live Setting”.
15
–
39
15
41
black/white picture with BD/DVD
- Make sure the disc is compatible with this unit.
4
network
- Check the content of your Internet service contract to see if your
Internet Service Provider prevents multiple terminals connecting at
the same time.
–
No sound or distorted sound
- Adjust the volume.
–
12, 14, 15
12
- Check that the speakers are connected correctly.
- Check the HDMI connections.
- Check the “Audio” settings.
33, 34
Cannot use the BD-Live function
- Use an SD card with enough space.
- Remove the write protection of an SD card.
–
Picture freezes momentarily during - Check the disc for fingerprints/scratches and clean with a soft cloth
playback
3
wiping from center to edge.
- Clean the disc.
The playback of BD-Video or
download of data does not
perform properly
- Check if an SD card is correctly inserted.
- Do not remove the card during playback as some BD-Videos require
an SD card during playback.
28
29
3
Disc cannot be played back
- Clean the disc.
- Ensure the disc label is facing up.
- Check if the disc is defective by trying another disc.
- Cancel the ratings control or change the control level.
- Insert a correct disc that can be played back on this unit.
3
17
–
36
4
“HDCP NOK” appears on the front “HDCP NOK” appears under the following conditions:
panel display
10
- When the connected device does not support HDCP.
- When the connected device is recognized as an HDCP incompatible
by HDMI SRM.
- When the connected device supports HDCP but cannot be
recognized as an HDCP compatible for some reason.
SD Memory Card cannot be read
- The format of the card does not match to this unit or the card is not
compatible.
–
–
6
No return to start-up screen when - Reset this unit by turning it off, then on again.
disc is removed
Note
The unit does not respond to the - Aim the remote control directly at infrared sensor window on the
remote control
front of the unit.
• Some functions are not available in specific modes, but this is not a malfunction. Read the
description in this user guide for details on correct operations.
• Some functions are prohibited on some discs.
- Reduce the distance to infrared sensor window.
- Replace the batteries in the remote control.
- Re-insert the batteries with their polarities (+/- signs) as indicated.
- Make the signal code of the remote control match to the signal code
of the unit.
–
6
6
6
47
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Others
Others
Language Code
Language
Esperanto
Estonian
Code
5161
5166
Language
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
Code
6469
5771
6460
5761
5767
Language
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Code
6367
6459
6461
6467
Language
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
Code
6655
6661
6665
6664
6657
6669
Language
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Code
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
F-H
Faroese
Fiji
Finnish [FIN]
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
L-N
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
Portuguese [POR]
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
U-Z
Arabic
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Slovak [SLO]
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Bulgarian [BUL]
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
5759
4947
7254
4961
5464
4965
5047
6058
5160
Swedish [SWE]
6149
6164
6159
6247
6265
5247
6258
6266
T
Irish [IRI]
Tagalog
Tajik
Tamil
Tatar
Telugu
6658
6653
6647
6666
6651
6654
4861
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Thai
Note
• If you choose a language that has a 3-letter-language code (written in bracket), the code will be
displayed every time you change the audio or subtitle language setting on pages 24-25. If you
choose any other languages, ‘---’ will be displayed instead.
48
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Others
Others
Specifications
ANALOG AUDIO OUTPUT
Output level: 2Vrms (10kΩ/kohms)
2 channel (L, R) output connector: Pin jacks, 1 set
SIGNAL SYSTEM
NTSC color
APPLICABLE DISCS
(1) BD/DVD-Video Discs
AUDIO OUTPUT PROPERTIES
(1) Frequency response
1-layer 12cm single-sided discs, 2-layer 12cm single-sided discs, 2-layer 12cm double-sided discs
(1 layer per side) / 1-layer 8cm single-sided discs (DVD)
(2) BD-RE/BD-R (Recorded in BDMV format)
1-layer 12cm single-sided discs, 2-layer 12cm single-sided discs
1-layer 8cm single-sided discs, 2-layer 8cm single-sided discs
(3) DVD-R
1-layer 12cm single-sided discs, 2-layer 12cm single-sided discs
(4) DVD-RW
1 BDs (linear PCM)
: 20Hz to 22kHz (48kHz sampling)
: 20Hz to 44kHz (96kHz sampling)
: 20Hz to 88kHz (192kHz sampling)
: 20Hz to 22kHz (48kHz sampling)
: 20Hz to 44kHz (96kHz sampling)
: 20Hz to 20kHz
2 DVDs (linear PCM)
3 CDs
(2) S/N ratio
(3) Total harmonic distortion : 1kHz 0.004%
: 115dB
(4) Dynamic range
: 100dB (BD/DVD) / 98dB (CD)
1-layer 12cm single-sided discs
1-layer 8cm single-sided discs
(5) Compact discs (audio CD)
12cm discs, 8cm discs
(6) CD-RW/-R
DIGITAL AUDIO OUTPUT
Coaxial digital output: Pin jack, 1 set
POWER SUPPLY
AC 120V, 60Hz
12cm discs, 8cm discs
POWER CONSUMPTION
30W (Standby: 0.6W)
APPLICABLE MEMORY CARDS
(1) SD Memory Card
(2) SDHC Memory Card
(3) miniSD Card
MAXIMUM EXTERNAL DIMENSIONS
W : 440mm (17-3/8")
H : 105mm (4-3/16")
(4) microSD Card
D : 324mm (12-13/16")
(including protruding parts)
VIDEO OUTPUT
Output connectors: Pin jack, 1 set
MASS
4.3 kg (9.5 lbs)
COMPONENT OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
PB/CB output level: 0.7Vp-p (75Ω/ohms)
PR/CR output level: 0.7Vp-p (75Ω/ohms)
Output connectors: Pin jacks, 1 set
REMOTE CONTROL
RC004BD
Infrared pulse type
Supply: DC 3V, 2 R6/AA batteries
External dimensions:
440.0 (17-3/8)
HDMI OUTPUT
W : 52mm (2-1/16")
H : 227mm (8-15/16")
D : 30mm (1-3/16")
Output jack: 19-pin HDMI terminal, 1 set
HDMI ver. 1.3a (Deep Color, Dolby Digital Plus, Dolby TrueHD, DTS-HD)
NETWORK TERMINAL
10BASE-T/ 100BASE-TX, 1 set
Mass: 138g (0.3 lbs) (including batteries)
• For purposes of improvement, specifications and design are subject to change without notice.
49
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
E5KB1UD / 1VMN27773A ★★★★
Printed in China
07/2009 541110331126M mzh-d
Download from Www.Somanuals.com. All Manuals Search And Download.
|