User Guide
Plaza DS •100
freesat digital TV receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
FURTHER INFORMATION
When installed and used correctly, this
equipment should provide many years of FREESAT
trouble-free entertainment in your home. You can get more information and help from
the freesat website at
carefully before installing or using the unit, and
keep it for future reference.
MANHATTAN
You can get more information on us from our
If you experience any difficulties connecting website at
Troubleshooting section at the end of this or you can phone us on 020 8450 0005
guide before contacting us.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Using the programme guide
Interactive TV services
Recording freesat programmes
25
27
28
In The Box
Your receiver
Remote control
5
6
8
1
2
Advanced Use
TV screen size
TV/DTV
Using the menu
The lock code
Changing the channel list
Using the favourite channels list
Settings
29
29
30
30
31
31
33
35
4
5
Preparation
The satellite dish
Connecting your receiver
Switching on
10
11
14
15
Tuning in
Everyday Use
Turning on the receiver
Changing channels
Changing the receiver’s language 39
Receiver information
18
18
20
20
21
21
23
24
40
3
Non-Freesat Channels
Tuning in non-freesat channels
Watching non-freesat channels
Appendix A - Safety
Appendix B - Troubleshooting
Appendix C - Specifications
41
41
42
43
46
48
Information bar
Changing the volume
Subtitles and audio description
Browsing channels
Using the channel list
Regional channels
4
Download from Www.Somanuals.com. All Manuals Search And Download.
In The Box
In your Plaza DS•100 freesat receiver
1
pack you should find the following
items.
Plaza DS•100 receiver
Remote control
Batteries for the remote control
SCART lead to connect to the TV
Quick-start guide
User guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
YOUR RECEIVER
Manhattan Plaza DS•100
Open the receiver’s front cover by gently
pulling forward at the sides.
Power indicator light.
Front
–
CH
+
CH
–
+
VOL VOL
VOL- / VOL+
Turn the volume up and down.
CH- / CH+
Switch to the next or previous channel.
POWER
Switch the receiver on and off.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Manhattan Plaza DS•100
Mains power output for connecting to the
mains supply.
Back
TV SCART
Output for connecting to the TV.
VCR SCART
Output/input for connecting to a video casette
recorder or DVD recorder.
LNB IN
Input for connecting to the satellite dish.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
Manhattan Plaza DS•100
Standby - switches the receiver on and
off.
Mute - silences the receiver’s sound.
0, 1 … 9 - buttons to choose channels and
so on, and to enter your postcode.
Switches to the last channel watched,
and switches between freesat and non-freesat
channel lists.
Switches to the next channel in the
favourite channels list.
Displays (and exit) the main menu screen.
Displays channel and programme
information.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Up, down, left, right - moves the
highlight bar in menus and in the EPG.
Allows you to browse the channels and
programmes.
Turns the volume up and down.
Switches to the next or previous channel.
Moves one page up or down the channel
list.
Chooses the option in the menu.
Displays the channel list.
Switches audio description on and off.
Switches between widescreen display
Displays the electronic programme guide
(EPG).
formats on a conventional TV.
Exits a menu and returns to the main
menu.
Switches subtitles on and off.
Displays the interactive and digital text
services (where available).
Exits a menu and returns to normal TV
viewing.
Red, green, yellow, blue -
Switches between freesat and the TV’s
tuner.
chooses options within menus.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
THE SATELLITE DISH
PREPARATION
To receive freesat you must connect your Plaza
DS•100 receiver to an appropriate satellite dish,
fixed in position and accurately pointed at 28.2°
East.
This section explains how to set up
your Plaza DS•100 to receive freesat.
2
For safety reasons and to provide reliable
reception, we strongly recommend that you
have your dish installed by a professional. You
may be able to use a satellite dish already
installedatyourhome.Ifyouhaveanyquestions
about the dish, please consult your installer.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING YOUR RECEIVER
Place your Plaza DS•100 receiver on a firm,
level surface close to the television, an electric
socket, and the cable from the dish. (See
Appendix A - Safety.)
HINT: The ‘F-connector’ used for
connecting the satellite dish cable to the
receiver has a central wire that is inserted
into the hole in the LNB IN socket while
the collar is screwed onto the socket.
When screwing the collar on make sure the
central wire goes into the socket hole and
is not bent to one side.
Connect the cable from your dish to the LNB IN
socket at the back of the receiver (if the dish
cable is fitted with a wall socket inside your
home, you will need a connecting cable, which
you can get from your installer).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING YOUR RECEIVER (continued)
Turn off your TV and connect the SCART lead
between the TV SCART socket on the back of
your Plaza DS•100 receiver and a SCART socket
on your television (usually labelled AV). There
may be more than one SCART socket on your
television. If you are not sure which to use,
check the manual for your TV.
HINT: If your TV has different connectors,
you will need an adapter or special cable.
Ask your dealer or check the manual for
your TV.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
You may have other equipment, such as a DVD
player, to connect to the receiver.
You can connect a VCR (video cassette recorder)
or DVD recorder to your Plaza DS•100 receiver
to record freesat programmes and play them
back. You will need to connect a second SCART
cable (not supplied) between the VCR SCART
socket on the back of the receiver and a SCART
socket on the VCR or DVD recorder. Check the
VCR or DVD recorder’s manual for guidance.
You could connect the Plaza DS•100 receiver to
a stereo or surround sound system instead, so
that you can listen to the sound through the
sound system instead of (or as well as) the
television’s speakers. You could use the VCR
Scart socket on the back of the receiver, but
you will need an adapter or special cable to suit
the connections of the sound system.
HINT: You cannot connect the receiver to
a VCR or DVD recorder and a sound system
at the same time.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SWITCHING ON
channel for the receiver (you usually do this
by pressing an ‘AV’ button on your TV remote
control, but check your TV manual for guidance).
Plug the receiver in and switch it on. After a few
seconds, the set-up screen shown below will
appear on your TV.
Take the battery compartment cover off the
back of the Plaza DS•100 remote control by
lifting it up while pushing the catch. Insert the
two AAA batteries supplied, as shown on the
inside of the compartment, and replace the
compartment cover.
HINT: If you do not see this screen on
your TV, see ‘Troubleshooting’ on page
46.
Turn your TV set on and choose the correct
14
Download from Www.Somanuals.com. All Manuals Search And Download.
The set-up screen shows the strength of the
freesat signal received from the satellite dish.
If the signal strength is below 50%, you should
check the satellite dish connection at the back
of the receiver (switch the receiver off and
reconnect the cable if necessary). If the connection
is OK, consult your dealer or installer.
HINT: The Network ID and Transport
ID are in the freesat signal and are
used to allow the receiver to identify
the satellite dish and freesat network,
to make sure the dish is receiving the
correct satellite signals.
When the signal strength shown on the set-up
When the Network ID and Transport ID have
been found and displayed, press the
on the remote control to display the following
postcode screen.
button
screen is 50% or more, you can tune the receiver
in.
TUNING IN
Because this is the first time that the receiver
has been used, there are no channels stored
in it’s memory. The receiver will automatically
find and store channels.
Press the
button on the remote control to
search for the ‘Network ID’ and ‘Transport ID’.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNING IN (continued)
Enter your postcode using the number buttons
on the remote control followed by the
button.
Thenusethe or buttonstochoosethescreen
format used by your TV (a 16:9 widescreen TV
or a squarer 4:3 TV), then press
channel search.
to start the
HINT: Enter your postcode by pressing the
correct number button a number of times
to produce the relevant letter (as printed
above each button) or number, in the same
way as ‘texting’ with a mobile phone. For
7
example, for an ‘s’ you would press
five
times. You do not need to enter a space. If
you make a mistake, the button deletes
the last letter or number you entered.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Your Plaza DS•100 receiver will take a few
seconds to find and store the available freesat
channels, displaying the names of the channels
as they are found. When it is finished, the
receiver will display the total number of freesat
channels it has found.
Your Plaza DS•100 receiver is now ready for
you to receive freesat digital TV and radio.
HINT: When new freesat channels become
available, you do not need to tune your
Plaza DS•100 receiver again because it is
automatically updated.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
HINT: You should leave the Plaza DS•100
receiver plugged in, with the socket switched
on,atalltimes(exceptwhenthereislightning
– see appendix A). If you are not using the
receiver, put it in standby by pressing the
button on the remote control or the
EVERYDAY USE
This section describes the day-to-day
use of your Plaza DS•100 receiver –
how to choose the channel you want
to watch and how to control the basic
features of your Plaza DS•100 receiver.
3
button on the front of the receiver.
TURNING ON THE RECEIVER
You turn on the Plaza DS•100 receiver by
CHANGING CHANNELS
pressing the
control or the
button on the remote
button on the front of the
Flick through channels by pressing the
buttons on the remote control (or the
and
CH
–
receiver. The power light on the front of the
receiver changes from red to blue when the
receiver is on.
+
CH
flap
buttons behind the fold-down
and
on the front of the Plaza DS•100 receiver).
+
CH
Pressing the
or
button will select the
next channel in the channel list. Pressing the
You turn the Plaza DS•100 receiver off, so it goes
–
CH
or
button will select the previous channel in
into standby, by pressing the
button on the
remote control or the
button on the receiver. the list. When you have chosen the last channel
+
CH
When the receiver is in standby, the power light
on the front of it glows red. The Plaza DS•100
uses less power when it is in standby.
in the list, pressing the
or
button will
select the first channel in the list. Similarly,
when you are on the first channel, pressing the
18
Download from Www.Somanuals.com. All Manuals Search And Download.
–
CH
or
button will go to the last channel in • Use the electronic programme guide (see
the channel list.
page 25).
If you know the channel number, you can go
directly to the channel you want using the
number buttons on the remote control. The
channel numbers have three digits, and the
first channel in the list is 101. As you put in a
channel number, each digit appears in the top
left of the screen to show the number you have
pressed. The radio stations are stored from
channel 700 onwards.
HINT: The channel numbers are set by
freesat. Because there are spaces left for
future channels to join freesat, there are
some numbers missing in the channel list.
SWAP
Press the
button on the remote control
to switch from the channel you are currently
watching to the channel you were watching
before.
There are several other ways to change channel.
• Use the browsing bar at the bottom of the
TV screen (see page 21).
HINT: If you enter a number which is not
an available channel, the channel you are
watching will not change.
• Use the on-screen channel list (see page 23).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION BAR
Whenever you change channel, the Plaza
DS•100 displays an information bar at the
bottom of the screen. This stays on the screen
for about three seconds.
HINT: If the channel you have chosen is not
on at that time, the normal information
bar is replaced by one that says ‘Service
not currently available’.
CHANGING THE VOLUME
You can turn the volume up or down using the
and
buttons on the remote control or
+
–
VOL
VOL
the
and
buttons behind the flap on the
front of the Plaza DS•100’s receiver. You can
turn the sound off completely by pressing the
button on the remote control. To put the
sound back on at the previous volume, press
the
button again.
The information bar shows:
• the name of the programme you are
watching, and the time it is on from and to;
• the name of the next programme on that
channel, and the time it is on from and to;
• the channel number and name; and
• the time.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
BROWSING CHANNELS AND PROGRAMMES
HINT: The volume and mute buttons also
affect the sound supplied to the VCR
SCART socket, so using these buttons
while you are recording a programme will
affect the recording.
You can see what is on the other freesat
channels by using the Plaza DS•100 receiver’s
browsing facility. Press
on the remote
control to display the browsing bar.
SUBTITLES AND AUDIO DESCRIPTION
Many freesat programmes are broadcast with
subtitles for people who are deaf or hard of
hearing. You display subtitles by pressing the
button, and turn them off by pressing the
button again. Some programmes have an
extra soundtrack to tell people who are blind or
partially sighted what is happening on screen.
When this soundtrack is available, you need to
turntheaudiodescriptionfunctiononbypressing
The browsing bar shows the name and number
of the current channel, the time, and the name
and times of the programme currently showing.
You can use the button to see the details of
the next programme on that channel. Press the
button to go back.
the
button on the remote control. Pressing
the button again turns the audio description off.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
BROWSING CHANNELS AND PROGRAMMES
(continued)
of the programme on now or next (whichever
you choose) and symbols to say whether the
Pressing
or
changes the browsing bar to channel has audio description, subtitles, or
show the details of the next channel up or down digital text and whether it is broadcast in high
the channel list, while you are still watching the definition or Dolby Digital sound (not available
current channel. By repeatedly pressing the
or buttons, you can see what is showing on
any of the other freesat channels. If you want
to watch the channel displayed in the browsing
with the Plaza DS•100 receiver). Pressing the
button again removes the extra information
from the browsing bar.
bar, press
press
, or to remove the browsing bar
.
HINT: You can also display the browsing
bar by pressing the or buttons. You
can browse through the channels more
quickly by pressing just these buttons.
While the browsing bar is displayed, pressing
the
button again will display more details
about the channel, including a short summary
22
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE CHANNEL LIST
Or you can return to the channel that you
You can display the channel list by pressing the
button on the remote control. This lists the were watching before using the channel list by
channels on the left-hand side of the screen, pressing the
in number order, with the current channel (as
button.
shown in the window on the right-hand side of
HINT: You can move through the channel
list more quickly by using the and
the screen) highlighted with an orange bar.
buttons, which move the orange highlight
bar through the list one page (11 channels)
at a time.
Use the
and
buttons on the remote
control to move the orange bar up or down
through the channel list to highlight the channel
you want to watch. Then press
channel list.
to close the
23
Download from Www.Somanuals.com. All Manuals Search And Download.
REGIONAL CHANNELS
You can watch the ITV1 variation for a nearby
BBC and ITV broadcast different variations region by choosing channel number 977. All the
of their channels for different regions in the BBC1 and BBC2 regional variations are listed in
UK. With freesat you can see the variations the channel list from number 950.
available to other regions.
You can replace your regions variation of BBC1
The regional variations BBC1, BBC2, and ITV1 or BBC2 with that of another region by pressing
the
button while channel 101 or 102 is
you receive are based on the postcode that you
entered when you installed the Plaza DS•100.
Those variations are channel numbers 101, 102
and 103 in the channel list.
highlighted with the orange bar in the channel
list screen.
Choose the region that you want, from the list
on the right-hand side of the screen, by moving
the highlight bar through the list with the
and
buttons and then pressing
. Or you
can press the
button to leave the region
setting the same.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE PROGRAMME GUIDE
until it highlights the section you want, then
press
.
The Plaza DS•100 can display information
about programmes that are showing on all
freesat channels in the next seven days. You
can browse the full programme schedules with
the electronic programme guide, which you see
HINT: You can set the Plaza DS•100 receiver
to skip the section screen and always display
the programmes for all the channels. The
‘Advanced use’ section starting on page 29
explains how to do this.
by pressing the
button.
The programme guide screen shows a table of
the programmes, with each page showing on
eight channels over a two-hour period. On the
first page of the programme guide, the current
programme on the channel you were watching,
highlighted in the centre of the screen with
an orange bar. A summary of the highlighted
programme is shown above the programme
guide. The current date and time is shown at
the top of the screen, and an orange line down
through the table shows the present time in
the schedules.
First, choose the section of the programme
guide you want to look at – either all channels
or a specific channel genre.
Use the
,
,
and buttons to move the
orange highlight bar through the list of sections
25
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE PROGRAMME GUIDE (continued)
screen and, after a few seconds, the receiver
automatically switches to the relevant channel.
When a programme has a reminder set, a
clock symbol is shown next to its name in the
programme guide table.
You look through the scheduled programmes
using the
and
button to move through
the channels, and the and buttons to move
the orange highlight bar across to show the
programmes showing at different times. As you
move the highlight bar through the tables, the
programme summary shown above the table
changes to reflect the programme highlighted.
You can find details of any programme, on any
channel, for up to eight days ahead.
HINT: You can jump through the
programme guide more quickly using the
red and green buttons, which move to the
next or previous page of eight channels.
The yellow and blue buttons move the
highlight bar through the schedules a day
back or forward.
When you reach the last channel on a page of
the guide, pressing
moves to the next page.
Press to switch the receiver to the channel
and programme highlighted by the orange bar.
If the programme is on at the time, the receiver
will switch to that channel immediately.
If the programme is scheduled for later on, a
reminder is set so that when the programme
is about to start, a message is displayed on
26
Download from Www.Somanuals.com. All Manuals Search And Download.
INTERACTIVE TV SERVICES
Several freesat channels broadcast a range of
digital text and interactive services such as
news, weather, games, sports information and
video alongside normal TV.
You can use the interactive services by pressing
the
or the red button while watching the
TV channel. This will display a menu of services
available from that channel or broadcaster.
You can set up to eleven reminders but if you
try to set a reminder for a programme that is
on at the same time as one you have already
set a reminder for, a warning is displayed
on the screen. You can cancel a reminder by
highlighting the programme in the programme
guide and pressing
again.
You can leave the programme guide and return
to watching TV by pressing the
button.
or
27
Download from Www.Somanuals.com. All Manuals Search And Download.
INTERACTIVE TV SERVICES (continued)
If you have a recorder connected to the receiver,
you can record a programme even when you are
not at home. Highlight the programme in the
programme guide, make a note of the date and
When you have finished with the interactive
services, you can return to normal TV by
pressing
again or the
button.
time, and set a reminder with the
button.
Then set the recorder’s timer to record from its
SCART input on the date and times noted.
HINT: Different broadcasters provide
different interactive services, so we
recommend that you try out the interactive
options on different channels to discover
where the services that most appeal to
you are.
Please note that for the recorder’s timer to
work the Plaza DS•100 must not be in standby
mode and ‘auto standby’ must be disabled (see
page 36).
HINT: Do not use the channel list,
programme, interactive services, and so on
while recording a programme as the screen
displays associated with these functions
will also be recorded.
RECORDING FREESAT PROGRAMMES
You can record a programme by connecting a
VCR or DVD recorder to the VCR SCART socket
on the back of the Plaza DS•100. You will
need to choose the recorder’s SCART input for
recording. See your recorder’s manual for more
information.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED USE
The section explains how to get the
most out of your Plaza DS•100 receiver.
4
Full frame squeezes
the widescreen
The full widescreen
broadcast picture.
picture into the
TV SCREEN SIZE
screen of a 4:3 TV.
Thefreesatchannelsbroadcastusingawidescreen
16:9 format, designed for widescreen TVs.
Ifyouhavea squarer4:3television,thewidescreen
image cannot be displayed. You use the
button to choose how the Plaza DS•100 fits the
16:9 widescreen image onto your 4:3 screen.
Centre cutout
displays only the
centre of the
widescreen picture
on a 4:3 TV. This is
the factory setting.
Letterbox shows the
whole picture on a 4:3
TV with black bars
above and below.
Pressing the
button will take you through the
three options available:
• only the centre of the image is shown (centre
cutout);
HINT: The
button has no effect on the
picture if you have set the TV screen size
to ‘16:9 widescreen’ in the settings menu
(see page 36).
• the complete widescreen picture is squeezed
into the squarer format (full frame); or
• the complete, unaltered image is shown,
smaller and with black bars above and below it.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
TV/DTV
The
button switches your television from
menu option, it opens up another menu of
choices relating to that option.
displaying the freesat programmes through
the receivers SCART lead to regular broadcasts
you receive through the TV aerial. When the
Plaza DS•100 is turned on, some televisions
will automatically switch to their SCART lead
to display the freesat channel. You can use the
button to release that automatic switch
You open the Plaza DS•100’s main menu by
pressing the
button on the remote control.
This displays the four main menu options – TV
listings, settings, language and information.
without having to switch off or disconnect the
receiver. Pressing the
button switches the
channel displayed on the television between the
signal from the aerial (TV) and digital television
from freesat (DTV).
USING THE MENU SYSTEM
Many of the receivers everyday functions are
carried out by pressing a single button on the
remote control, but the functions used less
often are carried out by making a selection
from on-screen menus. When you choose one
You can choose any of these options by pressing
the relevant number on the remote control.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
HINT: At any time when using the menu
options you can return to the previous
menu screen by pressing the
button
or the button. Or, you can return to
watching TV by pressing the
button.
When you get the Plaza DS•100 the PIN is set
to 0000. You can change this to any four digit
number, as explained later in this section.
THE LOCK CODE
CHANGING THE CHANNEL LIST
The channel list contains all freesat channels
that the receiver found when it was first
installed, and may include some channels that
you do not watch, do not want to include in the
on-screen channel list, or do not want some
members of your family to watch.
Some of the Plaza DS•100 menu options are
locked to avoid accidental changes, and you
can lock particular channels to prevent some
people, such as children, from watching them.
To unlock options or channels you need to enter
a four-digit PIN using the remote control.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE CHANNEL LIST (continued)
To remove a channel from the channel list, move
the orange highlight bar through the channels
and
Go to the Plaza DS•100 main menu by pressing
the
button. Choose the TV listings menu
using the
and
buttons (or the
by moving the highlight bar to the TV listings
buttons to move a page at a time). When
the channel you want to remove is highlighted,
option in the menu and pressing
, or by
1
press the
channel.
to enter the PIN and delete the
pressing
(the number of the TV listings
option in the menu).
HINT: This is the same channel list screen
you would use to choose a channel.
HINT: You need to enter the PIN because,
once deleted, a channel cannot be restored.
easily. You will need to install the receiver
again from scratch.
You can prevent any channel from being viewed
without first entering the PIN by locking that
channel in the channel list. Move the orange
highlight bar through the channel list using the
and
buttons to highlight the channel
you want to lock, then press the blue button to
enter the PIN and lock that channel.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE FAVOURITE CHANNELS LIST
The favourite channels list makes it easier for
you to choose the channel you want to watch,
by limiting the on-screen list to just a few
channels, such as those you watch the most.
In the list of channels displayed, use the
and buttons (and the and buttons
to move a page at a time) to move the orange
highlight bar to a channel that you want to
include in your favourites. Press the red button
to add that channel to the favourite channels
list. A channel included in the favourite channels
list is shown with a tick against its name. When
you have added all the channels that you want
to your favourites, press the yellow button
again to stop editing the favourites list.
It takes a short time to set up the favourite
channels list. First, display the channel list by
choosing option 1 from the main menu or by
pressing the
button, then press the yellow
button to edit the favourite channels list.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE FAVOURITE CHANNELS LIST
(continued)
orange bar and press
to the main channel list by pressing the red
button.
. You can switch back
HINT: You can remove a channel from the
favourite channels list by highlighting the
channel and pressing the green button.
You can also add and delete a channel from
You can also switch to a channel from the
favourite channels list, without going to the
channel list.
your favourites list using the
button.
Press the
button to switch to the next
channel in your favourite channels list (or to
the first in the list if you are currently watching
a channel that is not in the favourites list).
Press the
button again to switch to the
next channel in the list, and so on through your
favourites list.
HINT: The channels in the favourite channels
listarestoredinthesameorderastheyappear
in the normal channel list, regardless of the
order you added them to your favourites list.
If you want to see your favourite channels
list, go to the channel list and press the green
button. To view a channel, highlight it with the
34
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY BEEP
SETTINGS
The selections available from the settings
(option 2) in the main menu are concerned with
more advanced features of the Plaza DS•100.
We recommend that you take the time to read
this section carefully before you make changes
to the receiver from these menus.
The Plaza DS•100 can produce a small beep
through the TV speakers whenever a button on
the remote control is pressed. This is to confirm
that the button has been pressed and the Plaza
DS•100hasreceivedthecommand. Youcanturn
thisbeeponoroffbymovingtheorangehighlight
To make changes to any of the settings, first
go to the main menu with the
highlighting option 2, and pressing
button,
. Then
move the orange highlight bar to the setting
that you want to change, and press
display the options available.
to
you want and pressing
A confirmation of the setting is then shown
on-screen.
.
bar to the option
HINT: When the key beep option is on,
the beep can be heard through the TV
speakers even when the receiver’s volume
is turned down or muted. However, if the
TV’s volume is turned down or muted, you
will not be able to hear it.
HINT: When using the settings menu,
you can return to the main menu screen
by pressing the
button, or you can go back to watching TV
by pressing the button.
button or the
35
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO STANDBY
When you press the
button, you get a
screen that allows you to display all channels or
only channels of a certain genre (type, such as
sport, movies, music and so on). If you want to
automatically skip the selection screen and see
all channels listed in the programme guide, you
can turn off the genre setting. Move the orange
highlight bar to ‘off’ and press
is then confirmed on-screen.
. The setting
The Plaza DS•100 automatically goes into
standby if it is not used for a long time. If you
want to stop the receiver from doing this, use
the
and
buttons to move the orange
TV SCREEN SIZE
highlight bar to ‘disabled’ and press
setting is confirmed on-screen.
. This
GENRE SETTING
This option allows you to choose which screen
size is used when the Plaza DS•100 is turned
on. Use the
and
buttons to move the
36
Download from Www.Somanuals.com. All Manuals Search And Download.
SCART OUTPUT
orange highlight bar to the option you want,
then press
on-screen.
. The setting is then confirmed
This setting alters the signal your TV receives.
When you install the receiver, the SCART
output is set to RGB, but you can change it to
composite video. Use the
and
buttons
to move the orange highlight bar to the option
you want, then press
confirmed on-screen.
. The setting will be
HINT:The RGB setting will usually produce
the best quality picture, but a few
televisions cannot accept this signal. See
your TV manual for more guidance.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
PARENTAL SETTINGS
In the parental settings options you can change
the PIN by moving the orange highlight bar to the
‘change lock code’ option and pressing
. You
will need to enter your PIN (the factory setting is
0000) and then enter your new 4-digit PIN. You
will need to enter it a second time to confirm
your choice.
MENU TRANSPARENCY SETTINGS
The Plaza DS•100 can be set to prevent people You can turn this setting on so that the menu
watching adult channels. Move the highlight screens (and other on-screen information) are
bar to ‘hide adult channels’, press
and enter
displayed transparently so that you can see the
TV picture behind. Use the and buttons
to move the orange highlight bar to select ‘off’
(not transparent), or25%, 50% or75%, then press
. The setting will be confirmed on-screen.
your PIN. The adult category is then removed
from the selection screen in the channel list, the
adult channels are removed from the channel
list and programme guide, and they cannot
be selected by putting in the channel number
or by skipping through the channels with the
and
buttons. You can allow access to
adult channels again by choosing ‘show adult
channels’, pressing
, and entering your PIN.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE RECEIVER’S LANGUAGE
RECEIVER UPGRADE
The freesat channels can broadcast in a number
of languages or with subtitles available in a
number of languages. The Plaza DS•100 is set
to English-language soundtrack and English
subtitles, but you can change this setting using
the language menu.
When new software is made available for your
Plaza DS•100, it is automatically downloaded
to your receiver through your satellite dish. You
can choose to have the receiver updated with
new software automatically, or only when you
choose to download updates. Use the
and
buttons to move the orange highlight bar, to
select either ‘manual’ or ‘automatic’, then press
. The setting is then confirmed on-screen.
RESTORING ALL SETTINGS
To restore all settings to what they were
when you got the receiver, bring back deleted
channels, or retune the receiver if you move to a
different area, you can reinstall the Plaza DS•100
as though it were new from the factory. Press
and enter your PIN to start the installation
process, and follow the procedure set out in the
preparation and tuning in sections of this guide.
(see pages 10 and 15 ).
Display the main menu by pressing
and
3
press
to display the language menu. Move
the orange highlight bar to ‘audio language’
to alter the choice of language heard, or to
‘subtitle language’ to alter the language used
for subtitles, then press
.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE RECEIVER’S LANGUAGE
(continued)
and the software installed, and the postcode
you entered when you installed the receiver.
Move the orange highlight bar to the language
you want from the list of languages displayed,
Display the main menu by pressing
, and
4
press
to display the information screen.
then press
TV.
. Press
to return to watching
HINT: We recommend that you have this
screen displayed on your TV if you need to
phone the Plaza DS•100 helpline.
RECEIVER INFORMATION
The Plaza DS•100 can display a page of
information about your particular receiver
and your reception. This includes the signal
strength, the version of the receiver hardware
40
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNING IN NON-FREESAT CHANNELS
NON-FREESAT CHANNELS
This section explains how to set up
your Plaza DS•100 receiver to receive
channels that are not included with
freesat. As well as receiving the many
freesat channels, the Plaza DS•100 can
also be used to watch other satellite
channels as long as a channel is
broadcast from the same satellites as
freesat and is free.
5
Go to the settings menu by pressing
‘
2
followed by
, highlight the last option, add
non-freesat services’ and press
open the manual-tuning menu.
twice to
HINT: You have to tune in non-freesat
channels and they are less convenient to
switch to. Some functions of the Plaza
DS•100 are not available when viewing
non-freesat channels.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNING NON-FREESAT CHANNELS
(continued)
using the
and
buttons. All new channels
are stored automatically. Once you have tuned
in all the non-freesat channels you want, leave
the manual tuning menu and return to the
Use the
and
buttons to move between
the boxes for the ‘frequency’, ‘symbol rate’ and
‘LNB polarisation’ boxes, and in each enter the
relevant values with the number buttons or
the and buttons. The ‘level’ and ‘quality’
displays at the bottom of the screen show if
there is a signal present with those values.
settings menu by pressing
.
You should now choose the ‘show non-freesat
services’ option, move the orange highlight
bar to ‘yes’, and press
. This enables the
channel list to display the non-freesat channels
for selection and viewing.
HINT: The tuning information for
non-freesat channels may be given in
specialist magazines and on the particular
channel’s website.
WATCHING NON-FREESAT CHANNELS
Move the highlight bar to the ‘scan’ box and
press to start scanning for new channels. If
any new channels are found, the first of those
channels is displayed in the small preview Non-freesat channels are stored from channel
window
displayed number 3000 onwards, but they are not listed in
. You can change the channel
42
Download from Www.Somanuals.com. All Manuals Search And Download.
the programme guide and the
no information on the programmes showing.
button gives APPENDIX A - SAFETY
They cannot be added to your favourite channels POWER
list and you cannot choose them with the number The receiver should be plugged into a 230V to
buttons on the remote control.
240V AC, 50Hz supply.
You can only choose a non-freesat channel CABLES
from the channel list or by stepping from Make sure all cables are positioned so they are
another non-freesat channel using the
and buttons. Press to display the main
channel list and then the
to the non-freesat list. Choose the non-freesat
channel you want to watch by highlighting
not likely to be walked on, crushed or damaged
by things placed on or against them. Pay
particular attention to the power cable where it
goes into the socket and where it comes out of
the receiver. Do not connect or adjust cables to
the receiver when it is plugged in.
SWAP
button to switch
it with the orange bar using the
and
buttons, then press
.
TEMPERATURE AND MOISTURE
Do not use or leave the receiver in a hot, cold or
humid (moist) environment. Do not allow the
receiver to get wet – from drips or splashes – as
this is dangerous. Do not place vases or other
water-filled objects on top of the receiver.
HINT: There may be some non-Freesat
channels listed that you do not want, and
you can delete these in the normal way
using the button.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
VENTILATION
receiver is qualified to do so. Do not remove the
cover yourself – you could get an electric shock.
Slots and openings in the receiver’s cover are
for ventilation. Do not cover or block them as
this could lead to the receiver overheating.
REPLACEMENT PARTS
If your receiver needs repairing, make sure the
person carrying out the repair uses parts which
are specified by us or which have the same
specifications as the original part. Other parts
may cause a fire, electric shock or other dangers.
CLEANING
Unplug the receiver before you clean it with
a lightly dampened cloth. Do not use liquid or
aerosol cleaners.
HEAT AND FLAMES
Do not place the receiver near to naked flames
or sources of intense heat, such as an electric
fire. Make sure that no flames, such as lighted
candles, are placed on top of the receiver.
LIGHTNING
If there is a storm or lightning, unplug the
receiver.
SERVICING
Make sure that anyone who services your
44
Download from Www.Somanuals.com. All Manuals Search And Download.
PROTECTING THE ENVIRONMENT
ELECTRICAL SAFETY Your receiver needs a
230V AC ~ 50Hz mains supply and is fitted with
a moulded plug. If the plug breaks or becomes
damaged, do not use it. If you change the
fuse in the plug, make sure you refit the fuse
cover. If the plug needs replacing, follow these
instructions. The wires in the mains lead are
coloured in line with the following code.
If you one day find that your receiver or remote
control needs replacing, or are of no further
use to you, do not throw them out with your
household waste. Under the Waste Electrical
and Electronic Equipment (WEEE) regulations,
your local council must provide a suitable
recycling centre.
Blue - Neutral
Brown - Live
NO CONNECTION
(EARTH)
Do not throw batteries in the bin or on a fire.
Make sure that you dispose of batteries safely
at a local recycling centre. You can also recycle
batteries at many supermarkets.
FUSE
BLUE
(NEUTRAL)
BROWN
(LIVE)
OUTER
CABLE
SLEEVE
GRIP
45
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX B – TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
WHAT TO DO
Power cable disconnected
Mains fuse blown
Check the power cable.
Power light off
Check the fuse.
Switch on the receiver, check the
power cable, the switch at the
socket and the fuse.
Check the SCART lead is connected
to the receiver and the TV.
Choose the TV’s SCART input (see
the TV manual for guidance).
Check the cable connections at the
receiver and the dish. Consult your
installer if necessary.
Receiver not switched on
No set up
screen
SCART lead disconnected
Television not switched to SCART input
Cable from the satellite dish
disconnected
Signal strength
below 50%
Replace the cable from the satellite
dish. Consult your installer if necessary.
Reinstall the dish. Consult your
installer if necessary.
Cable from the satellite dish faulty
Dish in the wrong position
Cable from the satellite dish
disconnected
Check the cable from the dish.
Consult your installer if necessary.
Check the dish. Consult your installer
if necessary.
‘No signal’
message
Dish damaged or in the wrong position
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Check the SCART lead connections at
the receiver and the TV.
SCART lead disconnected
TV not switched to SCART input
Mismatched screen format
Receiver in standby
No picture or
sound
Choose the TV’s SCART input channel.
Full picture not
visible
Choose the correct screen size to suit
your TV.
Switch the receiver on.
Remote control not aimed at the
receiver correctly
Aim the remote control at the receiver.
No response to
remote control
Remote sensor on the front of the
receiver is obstructed
Check for obstructions in front of the
receiver.
Batteries in the remote control need replacing Replace the batteries in the remote control.
Wrong channel number used
Choose the channel from Channel List.
Cannot view a
channel
Enter the PIN. If you have forgotten the PIN,
phone the helpline on 020 8450 0005.
Channel locked
Information on the channel not downloaded Wait for the download.
No information
for a channel in
the programme
guide
Tuned to non-freesat channel
Tune to a freesat channel
Connect a SCART lead from the
receiver to the recorder.
No connection to recorder
Can’t record a
channel
Select the recorder’s SCART input.
See the recorder’s manual for guidance.
Wrong recorder input selected
47
Download from Www.Somanuals.com. All Manuals Search And Download.
HELPLINE
020 8450 0005
APPENDIX C - SPECIFICATIONS
Input frequency
950~2150MHz
Input connector
F type, female 75 ohm
Tuner
14.0V / 19.0V (maximum.350mA), short-circuit
protected
LNB supply
Digital signal input level -25 to -65 dBm
Video
Audio
Aspect ratio
4:3, 16:9 and letter box
Video output
Two SCART sockets; TV (CVBS/RGB) & VCR (CVBS)
Audio left and right
Audio output
Mains input voltage
Power consumption
230-240VAC~ 50Hz
Power
Requirements
Maximum 10W (LNB with 200mA)
Dimensions
Width, depth and height Width: 258mm, x depth: 175mm, height: 44mm
v2.1
48
Download from Www.Somanuals.com. All Manuals Search And Download.
|