Bluetooth
Stereo headSet
uSer MaNual
MODEL 175944
Download from Www.Somanuals.com. All Manuals Search And Download.
MAN-175944-UM-1106-02
operatioN
Charging the Battery
The battery is designed to provide power for eight hours each time it is charged. To recharge
the battery, plug the USB cable into the DC jack on the headset and connect the other end to
your PC.
NOTE: Before the first use of the headset, charge the battery fully for 10 hours.
Thereafter, recharging takes approximately 90 minutes.
Power/Link
LED
Charging
LED
DC jack
Mute
Turning the Headset On
on/off
To turn on the power to the headset, press and
hold the Power button (about 3 seconds) until the
Power LED lights blue.
Forward/
backward
Power
button
To turn off the power, press and hold the Power
button (about 3 seconds) until the Power LED turns off.
Volume
+/–
Reset
Battery
button
Low LED
• Blue LED: Power is on.
• Blue flashing LED: Connected to another device.
• Red LED: The battery is charging. (The red LED turns off when the battery is charged.)
• Red flashing LED: The battery is low. Recharge before the LED turns off.
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Headset with Your Bluetooth-Enabled Mobile Phone
1. Enable Bluetooth on your phone (refer to the phone’s user manual).
2. Turn on the headset. Check that no other device connects with the headset by confirming
that the Power/Link LED is not flashing.
3. In the phone’s Bluetooth menu, select "Devices."
4. Select "Stereo Headset."
5. Enter the PIN code “0000.”
To answer a call, push the Power button. To end a call, simply push the Power button again.
Using IVT BlueSoleil™
To use IVT’s BlueSoleil (application software that enables/supports many Bluetooth features),
first connect the Bluetooth Stereo Headset to your computer. Ensure that BlueSoleil is running on
your computer, then turn on your headset.
NOTE: IVT BlueSoleil software is not included with your Bluetooth headset. Refer to a
BlueSoleil user’s guide or IVT’s Web site (http://www.ivtcorporation.com) for further details and
support.
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Profiles
Bluetooth AV Service
Bluetooth Headset Service
To use the Headset Profile with Skype™:
To use the AV Profile to play audio:
1. Double-click the BlueSoleil icon in the task tray.
2. Press F5 to search for Bluetooth devices.
3. Double-click the "Stereo Headset" icon.
4. Click "Bluetooth AV Service" to create a
connection shortcut.
1. Double-click the BlueSoleil icon in the task tray.
2. Press F5 to search for Bluetooth devices.
3. Double-click the "Stereo Headset" icon.
4. Click "Bluetooth Headset Service" to create a
connection shortcut.
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel
Configuring BTAUDIO audio output
Sounds and Audio Devices Properties
1. Open "Control Panel" and
double-click "Sound and
Audio Devices."
BTAUDIO
BTAUDIO
2. Select the Audio tab.
3. Under "Sound playback,"
change the device to
"BTAUDIO."
4. Under "Sound recording,"
change the device to
"BTAUDIO."
My Bluetooth Places\Entire Bluetooth Neighborhood
5. Click "OK."
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using WidComm® Bluetooth Software
My Bluetooth Places\Entire Bluetooth Neighborhood
To use WidComm Bluetooth software, first connect the
Bluetooth Stereo Headset to your computer. Ensure that
WidComm is running on your computer, then turn on your
headset.
Audio Sink on Stereo Headset
Not Connected
NOTE: WidComm Bluetooth software is not included
with your Bluetooth headset.
Audio Sink on Stereo
Headset
To use the AV Profile to play audio:
Connected
1. Double-click the WidComm icon in the task tray.
2. Click "Search for devices in range."
3. Double-click the "Stereo Headset" icon.
4. Click "Audio Sink on Stereo Headset" to create a connection shortcut.
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring WidComm® Audio Output
Control Panel
1. Open "Control Panel"
and double-click "Sound
and Audio Devices."
2. Select the Audio tab.
Sounds and Audio Devices Properties
3. Under "Sound playback,"
change the device to
"Bluetooth High Quality
Audio."
Sound playback
Bluetooth High Quality Audio
Sound recording
4. Under "Sound recording,"
change the device to
"Bluetooth High Quality
Audio."
Bluetooth High Quality Audio
5. Click "OK."
ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring for Use with Computers
1. On the computer, go to Start ➞ Programs ➞
Bluetooth ➞ Bluetooth Settings.
Bluetooth Settings
2. On the headset, hold down the Power/Link
button until the Power/Link LED stays blue.
3. Click “New Connection.”
Add New Connection Wizard
Custom Mode
4. Select “Custom Mode”;
click “Next.”
ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
5. When “Select a device” appears, highlight
“Stereo Headset”; click “Next.”
Add New Connection Wizard
Device Name
Stereo Headset
6. In the field for PIN, enter “0000”; click “OK.”
Bluetooth Manager - Bluetooth Security
Bluetooth Passkey (PIN)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
7. On the Add New Connection Wizard screen,
select “Audio Sink”; click “Next.”
Add New Connection Wizard
Audio Sink
Add New Connection Wizard
Stereo Headset
8. In the “Connection Name” field, “Stereo
Headset” should appear as the default.
Select “Create a shortcut on the desktop”;
click “Next.”
Create a shortcut on the desktop
11
Download from Www.Somanuals.com. All Manuals Search And Download.
9. To enable the Bluetooth Headset, double-click the
Stereo Headset icon (or use the desktop shortcut
shown below).
Bluetooth Settings
Stereo
Headset
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
trouBleShootiNG
If the Bluetooth Stereo Headset does not work, try the following:
• Ensure that all connecting devices are sufficiently charged.
• Turn off all devices and then turn them on in the order shown in this manual.
• Ensure devices are within the 10-meter range.
• If the headset cannot be turned off, press the Reset button.
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
SpecificatioNS
General:
• Bluetooth standards: V 1.2, Class 2; A2DP profile (AV profile); Headset and hands-free profile
• Frequency Range: 2402 – 2480 MHz
• Compatibility: Support Bluetooth A2DP (AV profile), AVRCP, HS and HF profiles
• Effective range: 10 m (32 ft.)
Headset:
• Audio sample rate: 48 kHz (streaming format)
• S/N: > 85 dB
• Frequency response: 20 Hz – 22 kHz
• Output: 20 mW
• Battery type: built-in rechargeable lithium-polymer battery
• Charging time: 1.5 hours
• Playing time: up to 6 hours
• Dimensions: 100 x 75 x 70 mm (4 x 2.9 x 2.75 in.), folded; 65.2 g (2.3 oz.)
1ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Mobile phone compatibility (check other phones for interoperability):
• BlackBerry 7100t
• Fujitsu F900iT
• Motorola A768i, A780, E398, V3, V600, V710
• Nokia 3600, 3660, 6230, 6600, 6670, 6820, 7610, N-Gage
• Panasonic X70
• Siemens SX1, U15
• Sony-Ericsson P800, P900, T610, T68i, S700i, Z600, K700i
1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
www.manhattan-products.com
Are you completely satisfied with this product?
®
Please contact your MANHATTAN dealer with comments or questions.
Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
|