Makita Power Hammer HM1306 User Manual

INSTRUCTION MANUAL  
Demolition Hammer  
HM1306  
008264  
WARNING:  
For your personal safety, READ and UNDERSTAND before using.  
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
12. Secure work.  
Use clamps or a vice to hold the work. It is safer  
than using your hand and it frees both hands to  
operate the tool.  
13. Do not overreach.  
22. Have your tool repaired by a qualified person.  
This electric tool is in accordance with the relevant  
safety requirements. Repairs should only be  
carried out by qualified persons using original  
spare parts, otherwise this may result in  
Keep proper footing and balance at all times.  
14. Maintain tools with care.  
considerable danger to the user.  
ENB049-3  
Keep cutting tools sharp and clean for better and  
safer performance. Follow instructions for  
lubrication and changing accessories. Inspect tool  
cord periodically and if damaged have it repaired  
by an authorized service facility. Inspect extension  
cords periodically and replace, if damaged. Keep  
handles dry, clean and free from oil and grease.  
15. Disconnect tools.  
ADDITIONAL SAFETY RULES  
1.  
2.  
3.  
Wear ear protectors. Exposure to noise can  
cause hearing loss.  
Use auxiliary handles supplied with the tool.  
Loss of control can cause personal injury.  
Hold tool by insulated gripping surfaces when  
performing an operation where the cutting tool  
may contact hidden wiring or its own cord.  
Contact with a "live" wire will make exposed metal  
parts of the tool "live" and shock the operator.  
Wear a hard hat (safety helmet), safety glasses  
and/or face shield. It is also highly  
recommended that you wear a dust mask and  
thickly padded gloves.  
When not in use, before servicing and when  
changing accessories such as blades, bits and  
cutters.  
4.  
16. Remove adjusting keys and wrenches.  
Form the habit of checking to see that keys and  
adjusting wrenches are removed from the tool  
before turning it on.  
5.  
6.  
Be sure the bit is secured in place before  
operation.  
17. Avoid unintentional starting.  
Do not carry a plugged-in tool with a finger on the  
switch. Ensure switch is off when plugging in.  
18. Use outdoor extension leads.  
When tool is used outdoors, use only extension  
cords intended for outdoor use.  
19. Stay alert.  
Under normal operation, the tool is designed  
to produce vibration. The screws can come  
loose easily, causing a breakdown or accident.  
Check tightness of screws carefully before  
operation.  
7.  
In cold weather or when the tool has not been  
used for a long time, let the tool warm up for a  
while by operating it under no load. This will  
loosen up the lubrication. Without proper  
warm-up, hammering operation is difficult.  
Always be sure you have a firm footing.  
Be sure no one is below when using the tool in  
high locations.  
Watch what you are doing. Use common sense.  
Do not operate tool when you are tired.  
20. Check damaged parts.  
Before further use of the tool, a guard or other part  
that is damaged should be carefully checked to  
determine that it will operate properly and perform  
its intended function. Check for alignment of  
moving parts, free running of moving parts,  
breakage of parts, mounting and any other  
conditions that may affect its operation. A guard or  
other part that is damaged should be properly  
repaired or replaced by an authorized service  
center unless otherwise indicated in this  
instruction manual. Have defective switches  
replaced by an authorized service facility. Do not  
use the tool if the switch does not turn it on and  
off.  
8.  
9.  
Hold the tool firmly with both hands.  
10. Keep hands away from moving parts.  
11. Do not leave the tool running. Operate the tool  
only when hand-held.  
12. Do not point the tool at any one in the area  
when operating. The bit could fly out and  
injure someone seriously.  
13. Do not touch the bit or parts close to the bit  
immediately after operation; they may be  
extremely hot and could burn your skin.  
14. PROPER GROUNDING. This tool should be  
grounding while in use to protect the operator  
from electric shock.  
21. Warning.  
The use of any accessory or attachment, other  
than those recommended in this instruction  
manual or the catalog, may present a risk of  
personal injury.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
15. EXTENSION CORDS. Use only three-wire  
Installing or removing the bit  
extension cords which have three-prong  
1. Bull point  
grounding-type  
plugs  
and  
three-pole  
2. Notched portion  
3. Tool retainer  
4. Tool holder  
1
2
3
receptacles which accept the tool’s plug.  
Replace or repair damaged or worn cord  
immediately.  
16. Do not operate the tool at no-load  
unnecessarily.  
4
SAVE THESE INSTRUCTIONS.  
008266  
With the notched portion on the shank of the bit facing  
toward the tool retainer, insert the bit into the tool holder  
as far as it will go. Then pull out and turn the tool retainer  
180° to secure the bit. After installing, always make sure  
that the bit is securely held in place by trying to pull it  
out.  
FUNCTIONAL DESCRIPTION  
CAUTION:  
Always be sure that the tool is switched off and  
unplugged before adjusting or checking function on  
the tool.  
Side handle (auxiliary handle)  
Switch action  
1. Side handle  
1
1. Lock button  
2. Switch trigger  
1
2
008267  
008265  
The side handle swings around to either side, allowing  
easy handling of the tool in any position.  
CAUTION:  
Before plugging in the tool, always check to see  
that the switch trigger actuates properly and  
returns to the "OFF" position when released.  
OPERATION  
Chipping/Scaling/Demolition  
To start the tool, simply pull the switch trigger. Release  
the switch trigger to stop.  
For continuous operation, pull the switch trigger and  
then slide down the lock button.  
To stop the tool from the locked position, pull the switch  
trigger fully, then release it.  
ASSEMBLY  
008268  
CAUTION:  
Always be sure that the tool is switched off and  
unplugged before carrying out any work on the  
tool.  
Hold the tool firmly with both hands. Turn the tool on and  
apply slight pressure on the tool so that the tool will not  
bounce around, uncontrolled. Pressing very hard on the  
tool will not increase the efficiency.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Oiling  
MAINTENANCE  
1. Wrench  
2. Oil gauge  
CAUTION:  
1
2
Always be sure that the tool is switched off and  
unplugged before attempting to perform inspection  
or maintenance.  
Replacing carbon brushes  
1. Commutator  
2. Insulating tip  
3. Carbon brush  
008271  
2
1
1. Oil supply  
1
3
001146  
When the resin insulating tip inside the carbon brush is  
exposed to contact the commutator, it will automatically  
shut off the motor. When this occurs, both carbon  
brushes should be replaced. Keep the carbon brushes  
clean and free to slip in the holders. Both carbon  
brushes should be replaced at the same time. Use only  
identical carbon brushes.  
008272  
To replenish, remove the oil gauge with the wrench 23.  
Use only Makita genuine oil. The use of any other oil  
may harm the tool.  
To maintain product SAFETY and RELIABILITY, repairs,  
any other maintenance or adjustment should be  
performed by Makita Authorized Service Centers,  
always using Makita replacement parts.  
Use a hex-wrentch to remove the holder cap plates.  
1. Hex wrench  
2. Holder cap plate  
1
ACCESSORIES  
CAUTION:  
These  
accessories  
or  
attachments  
are  
2
recommended for use with your Makita tool  
specified in this manual. The use of any other  
accessories or attachments might present a risk of  
injury to persons. Only use accessory or  
attachment for its stated purpose.  
008269  
Use a screwdriver to remove the brush holder caps.  
Take out the worn carbon brushes, insert the new ones  
and secure the brush holder caps.  
If you need any assistance for more details regarding  
these accessories, ask your local Makita Service Center.  
1. Screwdriver  
2. Brush holder  
cap  
1
Bull point  
Cold chisel  
Scaling chisel  
Clay spade  
Rammer  
Oil supply  
Wrench 23  
Steel carrying case  
2
008270  
Reinstall the holder cap plates firmly.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Makita Corporation  
884757-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KVH Industries Telephone Accessories FB250 User Manual
Kyocera Telescope KD245 User Manual
Lincoln Automobile 2010 Navigator User Manual
Linksys Switch SD2005 User Manual
Listen Technologies Power Supply PS 6000 User Manual
Makita Portable Generator G2800R User Manual
Masterbuilt Fryer 20010106 User Manual
M Audio Microscope Magnifier MicroTrack 24 96 User Manual
Melissa Electric Shaver 638 018 User Manual
Mellerware Hot Beverage Maker 21405 User Manual