TVCR
CC13B1MG
CC19B1MG
Color TV with built-in VCR
Owner’s Ma nua l
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction 3
W elcom e to your TV/VCR owner’s m anual.
This manual describes two models: CC13B1MG and CC19B1MG. Although the models may have a differ-
ent appearance, both models operate exactly the same. The features described in this manual apply to
both models unless otherwise specified. The CC13B1MG is illustrated in this manual, but the CC19B1MG
has a similar appearance.
This manual has seven sections: Setting Up Your TV/VCR; Description of Controls; Basic Operations;
Recording Options; Playing Options; Additional Features; and Information You May Need. The instructions
explain all of the TV/VCR’s features, which are listed below.
Features
• Real-Time Counter
• Remote Control
• A-B Repeat Play
• Automatic Channel Setup
• Automatic Head Cleaner
• Automatic Operation Features
• Automatic Tracking Adjustment
• Blue Background
• Closed Caption
• Daylight-Savings Time
• High Quality (HQ) System
• On-screen displays in English or Spanish
• On-screen Menu Programming, accessible with
remote control or front panel buttons
• One-Touch Recording
• Repeat Play
• S-VHS Quasi Play Back (SQPB)
• ShowGuard™ - Indefinite Timer
Recording memory
• Sleep Timer
• SmartClockTM
• SmartLockTM
• Special Effects Playback: Forward and
Reverse Searching; Still
• Timer Recording
• Wake Up Timer
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this
equipment to rain or moisture.
Federal Communications Commission (FCC) Warning: Any unau-
thorized changes or modifications to this equipment void the
user’s authority to operate it.
This TV/VCR, equipped with a High Quality (HQ) system, is com-
patible with existing Video Home System (VHS) equipment.
Philips Consum er Electronics recommends that you use only
video cassette tapes that are labeled with the
mark. The
use of other tapes may result in poor picture quality and excessive
deposits on the video heads, which may not be covered by the
warranty if damage occurs.
Helpful Hints
Note to the Cable TV System Installer: This reminder is
provided to call the Cable TV system installer’s attention to
Article 820-40 of the National Electrical Code, which provides
guidelines for proper grounding – in particular, specifying that the
cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as possible.
• Before doing anything else, record
the TV/VCR’s model and serial num-
bers in the spaces provided on page
two. These numbers will help us
assist you if you ever call for help.
• Your new product, its packaging,
and this manual contain materials
that can be recycled and reused.
Specialized companies can recycle
your product to increase the
Declaration of Conform ity
Model Number:
Trade Name:
CC13B1MG/CC19B1MG
Magnavox
Responsible Party: Philips Consumer Electronics
P.O. Box 14810
amount of reusable materials and
to minimize the amount that needs
to be properly disposed.
Knoxville, TN 37914-1810
(865) 521-4316
As an ENERGY STAR® Partner, Philips Consumer
Electronics has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency. ENERGY
STAR® is a U.S. registered mark.
Your product uses batteries that
should not be thrown away when
depleted but should be disposed of
as small chemical waste.
Please find out about the local regu-
lations on disposal of your old prod-
uct, batteries, manual, and packag-
ing whenever you replace existing
equipment.
Using products with the ENERGY STAR® label can save energy.
Saving energy reduces air pollution and lowers utility bills.
SmartClockTM, SmartLockTM, and ShowGuardTM are trademarks of
Philips Consumer Electronics.
Copyright 2000 Philips Consumer Electronics. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Table of Contents
Setting Up Your TV/VCR
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Before Using the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Hooking Up the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7
Turning On the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Automatic Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-17
Daylight-Savings Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Description of Controls
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23
Adjusting the Picture Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25
On-Screen Status Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Basic O perations
Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Recording O ptions
One-Touch Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Rerecording (Tape Duplication) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-35
Defeat Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Playing O ptions
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
A-B Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-39
Real-Time Counter Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Playback Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Additional Features
SmartLock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42-45
Wake Up Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48-49
Blue Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Volume Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Automatic Operation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Inform ation You May Need
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54-55
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using the TV/VCR 5
Putting Batteries in the Rem ote Control
1
Rem ove the battery com partm ent lid on the bottom of
the rem ote control by sliding it in the direction of the
arrow.
1
2
3
2
Place two AA batteries inside the battery com partm ent
with their and ends aligned as indicated.
+
–
3
Replace the battery com partm ent lid.
Recording Prevention
Video cassette tapes have record tabs to ensure that recordings
are not accidentally erased.
1
1
2
To prevent accidental recording, break off the tab with a
screwdriver.
2
To record again, cover the hole with cellophane tape.
Using the Rem ote Control
● Point the remote control at the TV/VCR’s remote sensor.
● Do not put objects between the remote control and the
TV/VCR.
TV/VCR Maintenance
● In this TV/VCR, use only tapes with the
mark.
● Make sure any light adhesive stick-on notes are removed from
the video cassette tape before putting the tape in the TV/VCR.
Removable labels like these can jam the TV/VCR.
● Periodic maintenance is required to maintain your TV/VCR’s
excellent performance. This TV/VCR has an automatic head
cleaning system. However, the video heads will eventually
require cleaning or replacement. Only an authorized service cen-
ter should perform this service.
Helpful Hints
• The remote control and its batteries
are supplied.
• Do not mix alkaline and man-
ganese batteries.
• Do not mix old and new batteries.
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Hooking Up the TV/VCR
1
Hook up your TV/VCR using one of the connections shown.
Connect a Cable signal
or an antenna to the
ANT(enna) Jack.
A.
Hooking Up Your TV/VCR
W ith a Cable Signal or
O utdoor Antenna
ANT.
ANT.
Connect the Cable signal to
the IN Jack on the Cable Box.
B.
Connect an RF coaxial cable (75-
ohm, not supplied) to the OUT Jack
on the Cable Box and to the
Hooking Up Your TV/VCR
W ith a Cable Box
To view any channel, set the
TV/VCR to the Cable Box output
channel (channel 03 or 04). Then,
select channels at the Cable Box.
IN
ANT(enna) Jack on the TV/VCR.
OUT
RF coaxial cable
(not supplied)
ANT.
ANT.
Rod Antenna
(not supplied)
C.
Hooking Up Your TV/VCR
W ith an Indoor Antenna
To install a rod antenna (not sup-
plied), push the stem of the antenna
into the antenna hole on the top of
the TV/VCR. Connect the antenna
wire to the ANT(enna) Jack on the
back of the TV/VCR as shown.
Extend the antenna and adjust its
length, direction, and angle for the
clearest picture.
ANT.
ANT.
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the TV/VCR (cont’d) 7
D.
Hooking Up Your
TV/VCR to Another
Video Source
(VCR or Cam corder)
You may need this connection
if you want to copy tapes.
Details are on page 31.
Use an Audio cable to connect the AUDIO
OUT Jack on the VCR to the AUDIO In Jack
on the front of the TV/VCR.
AUDIO/VIDEO OUT
Jacks on VCR
3CH
IN
4CH
AUDIO VIDEO
ANT.
OUT
OUT
IN
AUDIO VIDEO
AUDIO VIDEO
STOP REW
EJECT
PLAY
F
.
F
W
D
R
E
C
CHANNEL
VOLUME
POWER
OTR
3CH
IN
4CH
AUDIO VIDEO
ANT.
OUT
OUT
IN
AUDIO/VIDEO In Jacks
on front of TV/VCR
Use a Video cable to connect the VIDEO OUT Jack on the
VCR to the VIDEO In Jack on the front of the TV/VCR.
2
Plug in the TV/VCR’s power cord.
3
Before you turn on the TV/VCR, go to page eight.
Helpful Hints
• Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is
bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.
• A rod antenna (not supplied) is available from Philips Service Solutions Group. The part number is 4835 303
37006. To order, call 1-800-851-8885. (This antenna will fit the CC13B1MG only.)
• Audio and video cables are not supplied.
Bent pin
Crooked Pin
Straight Pin
Plug
Cable
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Turning On the TV/VCR
Before you turn on the TV/VCR, make sure batteries are in the
remote control and the TV/VCR is hooked up correctly.
The instructions on this page work only when you turn on the
TV/VCR for the first time.
1
3
1
5
Press the PO W ER button. The TV/VCR will come on and the
screen shown below will appear.
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
SELECT LANGUAGE
4
7
5
8
0
6
9
> ENGLISH
ON
CHANNEL
ALT.CH
ESPAÑOL
SELECT KL OR
PRESS MENU TO CONTINUE
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
2
2
4
Press the PLAY/K button or the STO P/L button to select
English or Spanish on-screen displays and m enus.
PAUSE/STILL
3
Press the MENU button. The screen shown below will appear.
CONNECT ANTENNA OR CABLE
TO TVCR
THEN PRESS
B
TO END PRESS EXIT
Helpful Hints
4
• If you do not see any on-screen dis-
plays when you turn on the TV/VCR,
check your hookups, then try again.
If you still do not see any on-screen
displays, follow the steps on pages
nine-10 to select a language and
set up channels.
• To skip step 2, press the MENU
button. All on-screen displays will be
in English. To skip step 4, press the
STATUS/EXIT button. Channels will
not be set up, and CHANNELS
NOT SET will appear on the screen
briefly.
Press the FF/SEARCH/B button to begin autom atic chan-
nel setup. The TV/VCR will memorize all available channels.
When channels are set, CHANNELS ARE SET will appear on the
screen briefly. Then the TV/VCR will go to the lowest channel
programmed.
(If you try to set up channels when there is no antenna or cable
connected to the TV/VCR, programming will appear to take place,
but eventually a NO TV SIGNALS ... message will appear on the
screen. Connect an antenna or cable to the ANT(enna) jack on
the TV/VCR, then press the FF/SEARCH/B button again. You may
need to follow the steps on page 10 instead.)
5
• You cannot set up channels if you
are using a Cable Box.
Use the CHANNEL K/L buttons or the Num ber buttons
on the rem ote control to select a TV/VCR channel. Use
the VO LUME K/L buttons to adjust the sound.
• Line Input mode will always be
stored in the TV/VCR’s memory as
channel 00. When you select chan-
nel 00, A/V IN will appear on the
screen briefly. Press the CHANNEL
K/L buttons or the Number but-
tons to select another channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Selection 9
Follow the steps below to change the language of the on-screen
displays and menus.
2-4
1
5
1
Press the MENU button.
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
REMINDER
BRIGHTNESS
4
7
5
8
0
6
9
CHANNEL
ALT.CH
2
SLEEP/WAKE UP
SPEED
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the FF/SEARCH/B button.
VOLUME
MUTE
PRIMARY SETUP
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
SET CLOCK
PAUSE/STILL
[ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to
choose SELECT LANGUAGE. Then, press the
FF/SEARCH/B button.
SELECT LANGUAGE
> ENGLISH
ESPAÑOL
ON
SELECT KL
TO END PRESS EXIT
4
Press the PLAY/▲ button or the STO P/▼ button to select
ENGLISH or ESPAÑO L (Spanish).
Helpful Hint
• If you accidentally select Spanish
and need English on-screen displays
and menus:
1) Press the MENU button.
2) Press the PLAY/o button or the
STOP/p button to select PREPARA-
CION, then press the
5
Press the STATUS/EXIT button.
FF/SEARCH/B button.
3) Press the PLAY/o button or the
STOP/p button to select SELEC-
CION IDIOMA, then press the
FF/SEARCH/B button.
4) Press the PLAY/o button or the
STOP/p button to select ENGLISH.
5) Press the STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Automatic Channel Setup
Although the TV/VCR may automatically memorize the channels
you receive when you turn it on for the first time, you may set up
channels again by following the steps below.
2-3
1
Press the MENU button.
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
1
4
REMINDER
POWER
MENU
STATUS/EXIT
CLEAR
BRIGHTNESS
1
2
3
MEMORY
4
7
5
8
0
6
9
CHANNEL
ALT.CH
2
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP, then press the FF/SEARCH/B button.
SLEEP/WAKE UP
SPEED
PRIMARY SETUP
VOLUME
MUTE
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
SET CLOCK
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
[ON]
PAUSE/STILL
SELECT KL CHOOSE
TO END PRESS EXIT
B
3
Press the PLAY/▲ button or the STOP/▼ button to select
AUTO PROGRAMMING, then press the FF/SEARCH/B
button. AUTO CH PROGRAMMING ... will appear on the screen.
The TV/VCR distinguishes between TV channels and cable channels
automatically, and the TV/VCR will memorize its available channels.
Wait for the TV/VCR to set up
channels.
4
W ait for a few m inutes. When setup is complete, CHANNELS
ARE SET will appear on the screen. Then the programming of the
lowest channel number placed in the TV/VCR’s memory will
appear on the screen. Now, when you press the CHANNEL ▲/▼
buttons, you will scan only through channels you receive.
Helpful Hint
• Line Input mode will always be
stored in the TV/VCR’s memory as
channel 00. You cannot delete it.
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Channel Setup (cont’d) 11
Adding/Deleting Channels
1
Press the MENU button.
TO ADJUST PRESS { /
B
CH123
SAVED
>
CHANNEL
SMARTLOCK
REVIEW
5
3
1
POWER
MENU
STATUS/EXIT
CLEAR
EXIT
PRIM. SETUP
VCR PROGRAM
1
2
3
MEMORY
4
7
5
8
0
6
9
CHANNEL
ALT.CH
2
Press the PLAY/▲ button or the STO P/▼ button to select
SLEEP/WAKE UP
SPEED
CHANNEL.
VOLUME
MUTE
4
2
TO ADJUST PRESS { /
CH123
B
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
SAVED
>
CHANNEL
SMARTLOCK
REVIEW
EXIT
PRIM. SETUP
VCR PROGRAM
PAUSE/STILL
3
Press the CHANNEL ▲/▼ buttons to select the channel
you want to add or delete.
Helpful Hint
TO ADJUST PRESS { /
CH23
B
• To review the channels memorized
by the TV/VCR, follow these steps.
1) Press the MENU button.
2) Press the PLAY/▲ button or the
STOP/▼ button to select PRIM.
SETUP. Press the FF/SEARCH/B
button.
3) Press the PLAY/▲ button or the
STOP/▼ button to select CH MEM-
ORY REVIEW. Press the
SAVED
>
CHANNEL
SMARTLOCK
REVIEW
EXIT
PRIM. SETUP
VCR PROGRAM
4
Press the FF/SEARCH/B button or the
REW (ind)/SEARCH/{ button to select SAVED (to add
that channel) or DELETED (to delete that channel).
Repeat steps 3-4 to add or delete other channels.
FF/SEARCH/B button. A list of pro-
grammed channels will appear on
the screen.
4) If all the programmed channels
don’t fit on the screen, press the
FF/SEARCH/B button. If you do not
press the FF/SEARCH/B button
within 10 seconds, the remaining
channels will appear on the screen.
(If there are no remaining channels,
the previous menu will appear.) Or
press the REW(ind)/SEARCH/{
button to see the previous screen of
channels.
5
Press the STATUS/EXIT button.
Programming of the channel you added or deleted will appear.
5) Press the STATUS/EXIT button
once or twice.
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Setting the Clock
There are three ways to set the clock: Manually, with Automatic
PBS Channel Selection, or with Manual PBS Channel Selection.
With manual clock setting, you tell the TV/VCR the current time.
With Automatic or Manual PBS Channel Selection, the TV/VCR
gets the time from your local PBS station.
If you use either Manual PBS Channel Selection or Automatic PBS
Channel Selection, follow the steps on page 19 to have the
TV/VCR maintain the clock according to your Time Zone.
Cable Box users m ust set the clock m anually.
To set the clock manually, follow the steps on pages 12-13. To set
the clock using Automatic PBS Channel Selection, follow the steps
on pages 14-15. To set the clock using Manual PBS Channel
Selection, follow the steps on pages 16-17.
2-3
1
POWER
MENU
STATUS/EXIT
CLEAR
Before you begin, make sure:
● The TV/VCR is hooked up and turned on.
● Channels are set up.
● You make each entry within 60 seconds of the previous entry.
1
2
3
MEMORY
4
7
5
8
0
6
9
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
Manual Clock Setting
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PAUSE/STILL
1
Press the MENU button.
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
PRESS
B
REMINDER
BRIGHTNESS
2
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the FF/SEARCH/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
SET CLOCK
[ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Helpful Hints
Press the PLAY/▲ button or the STO P/▼ button to select
SET CLO CK. Then, press the FF/SEARCH/B button.
• Entries that do not match the
TV/VCR’s clock or calendar will cause
a question mark (?) to appear on the
screen.
• To make corrections while you are
setting the clock, press the CLEAR
button until the space for the informa-
tion you want to correct is flashing.
Then enter the correct information.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Clock (cont’d) 13
4
Press the PLAY/▲ button or the STO P/▼ button to select
SET MANUAL CLO CK, then press the FF/SEARCH/B
button.
SET MANUAL CLOCK
TIME – – : – –
DATE – – / – – / – – – –
7
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
TO END PRESS EXIT
4
7
5
8
0
6
9
CHANNEL
ALT.CH
5
SLEEP/WAKE UP
SPEED
Press two Num ber buttons for the hour(s) and two
Num ber buttons for the m inute(s). Then press 1 for AM
or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
VOLUME
MUTE
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
SET MANUAL CLOCK
PAUSE/STILL
TIME
09 : 30 PM
MONTH
– – / – – / – – – –
4
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
6
Press two Num ber buttons for the m onth, two Num ber
buttons for the day, and two Num ber buttons for the
year. For example, for July 1, 2000, press 07, 01, 00. The day of
the week will appear automatically.
5-6
SET MANUAL CLOCK
TIME
09 : 30 PM
DATE
07 / 01 / 2000
SATURDAY
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
7
Press the STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Setting the Clock (cont’d)
Autom atic PBS Channel Selection
1
Press the MENU button.
1,4
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
PRESS
B
REMINDER
BRIGHTNESS
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
2
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the FF/SEARCH/B button.
4
7
5
8
0
6
9
CHANNEL
ALT.CH
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
SLEEP/WAKE UP
SPEED
VOLUME BAR
SET CLOCK
[ON]
VOLUME
MUTE
SELECT KL CHOOSE
B
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
TO END PRESS EXIT
PAUSE/STILL
3
Press the PLAY/▲ button or the STO P/▼ button to select
SET CLO CK. Then, press the FF/SEARCH/B button.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
2-4
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
4
If O N appears beside AUTO CLO CK, press the MENU
button.
If O FF appears beside AUTO CLO CK, press the PLAY/▲
button or the STO P/▼ button to select AUTO CLO CK.
Then, press the FF/SEARCH/B button so that O N
appears to the right of AUTO CLO CK, then press the
MENU button.
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
>
SET PBS CH. AUTO
SET PBS CH. MANUAL
SELECT KL CHOOSE
B
TO END PRESS EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Clock (cont’d) 15
Wait for the TV/VCR to find
the time.
5
6
Press the PLAY/▲ button or the STO P/▼ button to
select SET PBS CH. AUTO . Then, press the
FF/SEARCH/B button.
SET AUTO CLOCK
TIME
– – : – –
DATE
– – / – – / – – – –
NOW SEARCHING
TO END PRESS EXIT
POWER
MENU
STATUS/EXIT
CLEAR
7
1
2
3
MEMORY
4
7
5
8
0
6
9
6
CHANNEL
ALT.CH
NOW SEARCHING flashes on the TV/VCR screen.
SLEEP/WAKE UP
SPEED
7
VOLUME
MUTE
W hen the TV/VCR finds the PBS channel, the tim e will
appear on the screen. Press the STATUS/EXIT button.
SET AUTO CLOCK
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PAUSE/STILL
5
TIME
06 : 30 PM
DATE
07 / 01 / 2000
SATURDAY
TO END PRESS EXIT
● If CANNOT FIND CLOCK DATA flashes on the TV/VCR
screen, you will be prom pted to turn off the TV/VCR.
Turn off the TV/VCR. Leave it off for several minutes. When
you turn on the TV/VCR again, the clock will be set.
SET AUTO CLOCK
TIME
– – : – –
DATE
– – / – – / – – – –
CANNOT FIND CLOCK DATA
TO END PRESS EXIT
Helpful Hints
• To display the time on the TV/VCR
screen, press the STATUS/EXIT but-
ton. Details are on page 26.
• You cannot use the AUTO CLOCK
feature if you don’t receive a PBS
channel that carries a time signal in
your area. Set the clock manually.
Download from Www.Somanuals.com. All Manuals Search And Download.
16 Setting the Clock (cont’d)
Manual PBS Channel Selection
1
1,4
Press the MENU button.
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
PRESS
B
REMINDER
BRIGHTNESS
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
4
7
5
8
0
6
9
2
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the FF/SEARCH/B button.
CHANNEL
ALT.CH
PRIMARY SETUP
SLEEP/WAKE UP
SPEED
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
SET CLOCK
VOLUME
MUTE
[ON]
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
SELECT KL CHOOSE
TO END PRESS EXIT
B
PAUSE/STILL
3
Press the PLAY/▲ button or the STO P/▼ button to select
SET CLO CK. Then, press the FF/SEARCH/B button.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
2-4
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
4
If O N appears beside AUTO CLO CK, press the MENU
button.
If O FF appears beside AUTO CLO CK, press the PLAY/▲
button or the STO P/▼ button to select AUTO CLO CK.
Then, press the FF/SEARCH/B button so that O N
appears to the right of AUTO CLO CK, then press the
MENU button.
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
>
SET PBS CH. AUTO
SET PBS CH. MANUAL
SELECT KL CHOOSE
B
TO END PRESS EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Clock (cont’d) 17
5
Press the PLAY/▲ button or the STO P/▼ button to
select SET PBS CH. MANUAL. Then, press the
FF/SEARCH/B button.
Wait for the TV/VCR to
find the time.
7
AUTO CLOCK (PBS) CH 02
TIME
– – : – –
DATE
– – / – – / – – – –
SELECT CHANNEL NUMBER
TO END PRESS EXIT
POWER
MENU
STATUS/EXIT
CLEAR
8
6
1
2
3
MEMORY
4
7
5
8
0
6
9
6
Use the Num ber buttons to select your PBS station.
CHANNEL
ALT.CH
AUTO CLOCK (PBS) CH 12
TIME
– – : – –
SLEEP/WAKE UP
SPEED
DATE
– – / – – / – – – –
VOLUME
MUTE
NOW SEARCHING
TO END PRESS EXIT
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PAUSE/STILL
5
7
NOW SEARCHING flashes on the TV/VCR screen.
8
W hen the TV/VCR finds the clock data, the tim e will
appear on the screen. Press the STATUS/EXIT button.
AUTO CLOCK (PBS) CH 12
TIME
06 : 30 PM
DATE
07 / 01 / 2000
SATURDAY
TO END PRESS EXIT
● If CANNO T FIND CLO CK DATA flashes on the
TV/VCR screen and you know another PBS channel,
press the PLAY/▲ button or the STO P/▼ button to
choose SELECT NEW PBS CH. Then, press the
FF/SEARCH/B button. Repeat step 6.
● If CANNO T FIND CLO CK DATA flashes on the
TV/VCR screen and you do not know another channel,
press the PLAY/▲ button or the STO P/▼ button to
select SET PBS CH. AUTO. Then, press the
FF/SEARCH/B button. The TV/VCR will search for the PBS
channel automatically.
• If the PBS channel is found, the time will appear on the screen.
• If the PBS channel is not found, you will be prompted to turn
off the TV/VCR. Leave it off for several minutes. When you turn
on the TV/VCR again, the time will be set.
Helpful Hints
• If you have an Antenna hookup, you
may select channels 2-69 at step 6.
If you have a cable connection (but
no Cable Box), you may select chan-
nels 1-125 at step 6. Details about
available memorized channels are
on page 11.
• To display the time on the TV/VCR
screen, press the STATUS/EXIT but-
ton. Details are on page 26.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 Daylight-Savings Time
When the Daylight-Savings Time feature is ON, the TV/VCR clock
will automatically move forward one hour on the first Sunday in
April and move back one hour on the last Sunday in October.
To turn Daylight-Savings Time ON or OFF, follow the steps
below.
2-4
5
1
1
Press the MENU button.
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
PRESS
B
4
7
5
8
0
6
9
CHANNEL
ALT.CH
REMINDER
BRIGHTNESS
SLEEP/WAKE UP
SPEED
2
VOLUME
MUTE
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the FF/SEARCH/B button.
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PAUSE/STILL
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
SET CLOCK
[ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
SET CLO CK. Then, press the FF/SEARCH/B button.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
4
Press the PLAY/▲ button or the STO P/▼ button to select
DAYLIGHT SVG.TIME. Then, press the FF/SEARCH/B
button so that O N or O FF appears beside DAYLIGHT
SVG. TIME (Daylight Savings Tim e).
5
Press the STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Zone 19
When you set the clock using AUTO CLOCK, specify your time zone.
The TV/VCR will maintain the clock according to your time zone.
1
Press the MENU button.
2-5
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
PRESS
B
6
1
REMINDER
BRIGHTNESS
POWER
MENU
STATUS/EXIT
CLEAR
2
1
2
3
MEMORY
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the FF/SEARCH/B button.
4
7
5
8
0
6
9
PRIMARY SETUP
CHANNEL
ALT.CH
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
SET CLOCK
[ON]
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
SELECT KL CHOOSE
TO END PRESS EXIT
B
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PAUSE/STILL
3
Press the PLAY/▲ button or the STO P/▼ button to select
SET CLO CK. Then, press the FF/SEARCH/B button.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
4
Press the PLAY/▲ button or the STO P/▼ button to select
SET TIME ZO NE. Then, press the FF/SEARCH/B button.
SET TIME ZONE
> AUTO
ATLANTIC
[ON]
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
Helpful Hints
• If you select AUTO at step 5, the
TV/VCR will set the clock according
to the time zone data of the PBS
station it finds.
SELECT KL
TO CONTINUE PRESS MENU
5
• You cannot select SET TIME ZONE
at step 4 if AUTO CLOCK is set to
OFF.
• You may need to turn off the
TV/VCR for several minutes to
enable the TV/VCR to adjust the
clock according to your time zone.
Press the PLAY/▲ button or the STO P/▼ button to select
your tim e zone.
6
Press the MENU button, then press the STATUS/EXIT
button.
Download from Www.Somanuals.com. All Manuals Search And Download.
20 Front Panel
Cassette Com partm ent
Insert a video cassette tape here.
W ireless Rem ote Sensor
Receives a signal from your remote control so
you can operate the TV/VCR from a distance.
STO P/EJECT Button
Press once to stop the tape. When playback
is stopped, press to eject the tape. Press to
select an item in the menu.
VIDEO In Jack
Connect this jack to the video out jack of a
camcorder or a VCR. Details are on page 31.
AUDIO In Jack
Connect this jack to the audio out jack of a
camcorder or a VCR. Details are on page 31.
EARPHO NE Jack
AUDIO VIDEO
STOP REW
EJECT
PLAY
F.FWD REC
OTR
CHANNEL
VOLUME
POWER
EARPHONE
Connect earphones (not supplied) here for
personal listening.
REW (ind) Button
VO LUME o/p
Buttons
Press to adjust the
sound level.
Press the CHANNEL
o button and the
VOLUME p button
on the TV/VCR at
the sam e tim e to
display the pop up
menu. Press again to
remove the pop up
menu.
When tape playback is stopped, press to rewind
the tape at high speed. During playback, press to
rewind the tape while the picture stays on the
screen. Press to change a setting of a pop up
menu item (for example, to adjust the BRIGHT-
NESS) or to return to the previous menu.
PLAY Button
Press to play a tape. Details are on page 28.
Press to release Search or Still mode and
return to normal playback. Details are on page
41. Press to select an item in the menu.
F. FW D (fast forward) Button
When tape playback is stopped, press to fast
forward the tape at high speed. During play-
back, press to fast forward the tape while the
picture stays on the screen. Press to change a
setting of a menu item (for example, to adjust
the BRIGHTNESS) or to advance to the next
menu.
CHANNEL o/p
Buttons
Press to scan through
the TV/VCR channels.
During tape playback,
press to adjust the
tracking. Details are
on page 52.
REC(ord)/O TR Button
Press once to start a recording. Details are on
page 29. Press repeatedly to start a One-
Touch Recording (an immediate timed
recording, 30 minutes to eight hours long) of
the channel you are watching. Details are on
page 30.
Press the CHANNEL
o button and the
VOLUME p button
on the TV/VCR at
the sam e tim e to
display the pop up
menu. Press again to
remove the pop up
menu.
RECO RD Light
This light appears during a recording. It flashes slowly when
the TV/VCR power is turned off to set a timer recording. It
blinks rapidly when a recording is paused or when the power
is off for a timer recording, but there is no tape in the
TV/VCR. It will blink rapidly two minutes before a timer
recording is set to begin if the TV/VCR power is on.
PO W ER Button
Press to turn the power on or off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel 21
ANT.
ANT(enna) Jack
Connect your antenna or cable here.
Details are on pages six-seven.
AC Power Cord
Connect to a standard AC outlet to
supply power to the TV/VCR.
Antenna Hole
Connect the stem of an indoor antenna
here. Details are on page six.
Download from Www.Somanuals.com. All Manuals Search And Download.
22 Remote Control Buttons
CLEAR Button
Press to erase incorrect data when programming TV/VCR func-
tions. Also, press to reset the real-time counter to 0:00:00.
Details are on page 40.
STATUS/EXIT Button
Press to see the status display. Press again to remove the status
display. Details are on page 26. Press to exit the menu.
MENU Button
Press to display the pop up menu. You also may use the buttons
on the front panel of the TV/VCR to access the pop up menu.
Details are on page 20.
POWER
MENU
STATUS/EXIT
CLEAR
PO W ER Button
Press to turn on or off the TV/VCR.
1
2
3
MEMORY
Num ber Buttons
Use to select channels and to program TV/VCR functions (such as
setting the clock).
4
7
5
8
0
6
9
CHANNEL
ALT.CH
● Cable Users
Enter channel numbers as a two-digit number for the quickest results.
For example, to select channel 6, press 0,6. If you only press the
Number 6 button, channel 6 will be selected after a brief delay. (There
also may be a brief delay when you select channels 10, 11, and 12.) If
you want to select channels 100 and above, enter channel numbers as a
three-digit number. For example, to select channel 117, press 1, 1, 7.
● Antenna Users
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PAUSE/STILL
Enter channel numbers as a two-digit number for the quickest results.
You may only select channels 2-69. For example, to select channel 5,
press 0,5. If you only press the Number 5 button, channel 5 will be
selected after a brief delay.
VO LUME ▲/▼ Buttons
Press to adjust the sound level. If you press the VOLUME ▲/▼
buttons when the sound is muted, the sound will be restored.
REC(ord)/O TR Button
Press once to start a recording. Details are on page 29. Or, press
repeatedly to start a One-Touch Recording (an immediate timed
recording, 30 minutes to eight hours long) of the channel you are
watching. Details are on page 30.
STO P/▼ Button
Press to stop the tape. Press to select an item in the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Buttons (cont’d) 23
CHANNEL ▲/▼ Buttons
Press to scan through the TV/VCR’s channels.
MEMO RY Button
Press to memorize a tape position at which the real-time counter
was set to 0:00:00. Details are on page 40. Or, press to memorize
the start and end positions on a tape when setting up A-B Repeat
Play. Details are on pages 38-39.
ALT. CH (Alternate Channel) Button
Press to return to the TV channel you were viewing immediately
before switching to your current channel.
SLEEP/W AKE UP Button
POWER
MENU
STATUS/EXIT
CLEAR
Press to set the Sleep Timer. Details are on page 47. Press to set
the Wake Up Timer. Details are on page 46.
1
2
3
MEMORY
4
7
5
8
0
6
9
MUTE Button
Press to eliminate the TV/VCR’s sound. Press again to return to
the previous volume level.
CHANNEL
ALT.CH
REW (ind)/SEARCH/{ Button
When tape playback is stopped, press to rewind the tape at high
speed. During tape playback, press to rewind the tape while the
picture stays on the screen. Details are on page 41.
Press to change a setting of a pop up menu item or to return to a
previous menu.
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PLAY/▲ Button
PAUSE/STILL
Press to play a tape. Details are on page 28. Press to release Search
or Still mode and return to normal playback. Details are on page
41. Press to select an item in the menu.
PAUSE/STILL Button
During recording, press to temporarily stop the recording. Press
again to resume recording. Details are on page 29. You cannot
pause a One-Touch Recording.
During tape playback, press to freeze the picture (still). Each time
you press the PAUSE/STILL button, the noise lines will change
position on the screen. Details are on page 41.
FF/SEARCH/B Button
When tape playback is stopped, press to fast forward the tape at
high speed. During tape playback, press to fast forward the tape
while the picture stays on the screen. Details are on page 41.
Press to change the setting of an item in the on-screen menu or
press to proceed to the next menu.
SPEED Button
Press to select the recording speed (SP or SLP).
Download from Www.Somanuals.com. All Manuals Search And Download.
24 Adjusting the Picture Controls
Follow these steps to adjust the TV/VCR’s brightness, picture,
color, tint, and sharpness.
1
Press the MENU button.
4
1
TO ADJUST PRESS { /
B
>
BRIGHTNESS
PICTURE
COLOR
POWER
MENU
STATUS/EXIT
CLEAR
TINT
SHARPNESS
TV RESET
1
2
3
MEMORY
4
7
5
8
0
6
9
CHANNEL
ALT.CH
2
Press the PLAY/▲ button or the STO P/▼ button to select
the desired control (BRIGHTNESS, for exam ple).
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
3
3
PAUSE/STILL
Press the REW (ind)/SEARCH/{ button or the
FF/SEARCH/B button to adjust the control. (Refer to the
chart on page 25.)
2
4
W hen you finish, press the STATUS/EXIT button.
Helpful Hints
• The on-screen menus shown on
page 25 will disappear if no adjust-
ments are made within 60 seconds.
• The original settings will probably
give you the best picture quality.
• To reset the picture controls to the
original settings, press the MENU
button, then press the PLAY/▲ but-
ton or the STOP/▼ button to select
TV RESET, then press the
FF/SEARCH/B button. TV RESET
COMPLETED will appear on the
screen briefly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture Controls (cont’d) 25
Decrease
decreased brightness
decreased contrast
paler
Increase
increased brightness
increased contrast
more brilliant
more green
BRIGHTNESS
PICTURE
CO LO R
TINT
SHARPNESS
more purple
softer
clearer
Press the
REW(ind)/SEARCH/{
button to decrease a
picture control. Press
the FF/SEARCH/B
button to increase a
picture control.
AUDIO VIDEO
STOP REW
EJECT
PLAY
CHANNEL
VOLUME
POWER
EARPHONE
TO ADJUST PRESS { /
B
TO ADJUST PRESS { /
B
TO ADJUST PRESS { /
B
BRIGHTNESS
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
TV RESET
>
BRIGHTNESS
PICTURE
COLOR
>
PICTURE
COLOR
TINT
SHARPNESS
TV RESET
>
TINT
SHARPNESS
TV RESET
TO ADJUST PRESS{ /
B
TO ADJUST PRESS { /
B
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
TV RESET
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
TV RESET
>
>
Press the STOP/▼
button
Press the PLAY/▲
button
Download from Www.Somanuals.com. All Manuals Search And Download.
26 On-Screen Status Displays
A status display will appear when you press the STATUS/EXIT but-
ton or certain function buttons. The contents of the status display
will vary. To choose the status display mode, follow the steps below.
If you select STATUS ON, then select COUNTER ONLY
OFF:
● Whenever you press the STOP/p button or the PLAY/o button,
the status display will appear for five seconds. Portions of the sta-
tus display also may appear when you press other function but-
tons.
Current
Tape
Function
Channel
Time
12:00 AM
CH10
STOP
If you select STATUS ON, then select COUNTER ONLY
ON:
● Whenever you press the PLAY/o button, the status display will
appear for five seconds. After five seconds, only the counter will
remain on the screen. Portions of the status display also may
appear when you press other function buttons.
If you select STATUS OFF:
SLP
M 1:23:45
● The status display will not appear when you press function but-
tons. You must press the STATUS/EXIT button to see the status
display.
Counter
and
Counter
Memory
Tape
Speed
1
Press the MENU button.
2
Press the PLAY/▲ button or the STO P/▼ button to select
VCR SETUP, then press the FF/SEARCH/B button.
3
Press the PLAY/▲ button or the STOP/▼ button to select
ON-SCREEN MODE, then press the FF/SEARCH/B button.
4
Press the PLAY/o button or the STO P/p button to select
STATUS, then press the FF/SEARCH/B button so that
O N or O FF appears beside STATUS.
ON-SCREEN MODE
> STATUS
[ON]
[OFF]
COUNTER ONLY
SELECT KL CHOOSE
B
TO END PRESS EXIT
Helpful Hint
5
If you set STATUS to O FF, go to step 6.
If you set STATUS to O N, press the PLAY/o button or
the STO P/p button to select CO UNTER O NLY, then
press the FF/SEARCH/B button so that O N or O FF
appears beside it.
• You cannot view closed captions
during recording or tape playback if
COUNTER ONLY is set to ON.
Details are on pages 48-49.
• If STATUS is set to ON, closed cap-
tions will be interrupted briefly when
you insert or remove a tape. Details
are on page 48-49.
6
Press the STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Reminder 27
The channel number will remain on the screen at all times when
you set REMINDER to ON. The exceptions are during tape play-
back or when closed captioning is selected.
Set REMINDER to ON or OFF by following the steps below.
4
1
1
POWER
MENU
STATUS/EXIT
CLEAR
Press the MENU button.
1
2
3
MEMORY
TO ADJUST PRESS { /
B
4
7
5
8
0
6
9
OFF
CHANNEL
ALT.CH
>
REMINDER
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
3
2
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
2
PAUSE/STILL
Press the PLAY/▲ button or the STO P/▼ button to select
REMINDER.
TO ADJUST PRESS { /
B
OFF
>
REMINDER
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
3
Press the REW (ind)/SEARCH/{ button or the
FF/SEARCH/B button to select O N or O FF. Each press of
the REW(ind)/SEARCH/{ button or the FF/SEARCH/B button
turns REMINDER ON or OFF.
TO ADJUST PRESS { /
B
CH12
ON
>
REMINDER
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
4
Press the STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
28 Playing
Follow the steps below to play a tape.
Insert a tape in the TV/VCR.
1
5
1
Press the STOP/EJECT button
on the TV/VCR.
Insert a tape in the TV/VCR. The power will come on. If the
tape’s record tab has been removed, playback should start auto-
matically.
2
If playback does not start autom atically, press the
PLAY/▲ button to start playback.
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
4
7
5
8
0
6
9
3
CHANNEL
ALT.CH
Press the STO P/▼ button on the rem ote control or the
STO P/EJECT button on the TV/VCR once to stop play-
back.
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
4
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
2
3
Press the REW (ind)/SEARCH/{ button to rewind the
tape.
4
PAUSE/STILL
5
W hen the tape has finished rewinding, press the
STO P/EJECT button on the TV/VCR to rem ove the tape.
S-VHS Q uasi Play Back (SQ PB)
This unit has a SQPB function that allows you to view a tape
recorded in S-VHS format. A tape recorded in S-VHS format
will play the same as a tape recorded in normal format. This
unit detects whether the tape is recorded in S-VHS format or in
nor-mal format.
Helpful Hints
• If the tape you want to play is
already in the TV/VCR, turn on the
TV/VCR power, then press the
PLAY/▲ button.
• Playback features and options are
on pages 37-41.
• When you play a tape recorded in
S-VHS format on this unit, you can
not get the high resolution that
would be available on an S-VHS
VCR. Noise lines (black and white
streaks) may appear on the picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording 29
Read and follow the steps below to record a TV program.
1
Place a tape with its record tab intact (see page five) in the
TV/VCR. The power will come on. Or, if the tape is already in
the TV/VCR, press the POW ER button to turn on the
TV/VCR, if necessary.
2
Press the SPEED button until the desired tape speed
appears on the TV/VCR screen. Details about tape speed are given
below.
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
1
4
7
5
8
0
6
9
CHANNEL
ALT.CH
3
3
2
5
Use the CHANNEL ▲/▼ buttons or the Num ber buttons to
select the channel to be recorded. (Channels cannot be changed
during recording.)
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
4
6
4
PAUSE/STILL
Press the REC(ord)/OTR button once to start recording.
The RECORD light will glow.
● If there is not a tape in the TV/VCR, NO CASSETTE flashes on
the screen briefly.
● If the tape does not have a record tab, PROTECTED CASSETTE
CANNOT RECORD flashes on the screen briefly. The TV/VCR
will eject the tape. Insert another tape.
5
To pause the recording (for exam ple, during com m ercials),
press the PAUSE/STILL button. The RECORD light will flash.
To resum e recording, press the PAUSE/STILL button again
or the REC(ord)/OTR button. The RECORD light will glow.
Helpful Hints
6
• You cannot record one channel
while watching another.
• Recording options are on pages
30-36.
To stop recording, press the STOP/▼ button.
Tape Speeds
This chart shows the recording/playback time for three types of
video cassettes (T160, T120, and T60). There are three playback
speeds: SP, LP, and SLP. During playback, the VCR selects the
tape speed automatically. When recording, you can change the
tape speed using the SPEED button. You cannot record in LP
speed.
• You cannot record if DEFEAT
RECORDING is set to ON. (REC
DEFEATED will flash on the screen.)
Details are on page 36.
• If you pause a recording for more
than five minutes, the TV/VCR will
switch to Stop mode automatically
to protect the video cassette tape
from damage.
• You can change the tape speed
with the SPEED button while a
recording is in progress, but some
distortion may appear on the tape.
Cassette type / Playback Time
Tape Speed
SP(Standard Play)
T160
2 hrs.
40 mins.
5 hrs.
T120
T60
2 hrs.
1 hr.
LP(Long Play)
(playback only)
4 hrs.
6 hrs.
2 hrs.
3 hrs.
20 mins.
SLP(Super Long Play)
8 hrs.
Download from Www.Somanuals.com. All Manuals Search And Download.
30 One-Touch Recording
The One-Touch Recording (OTR) function allows you to program
an immediate timed recording from 30 minutes to eight hours long
without setting the timer.
Before you begin, make sure:
● Channels are set up.
Press the STOP/EJECT but-
ton on the TV/VCR to stop
the OTR.
4
3
● There is a tape in the TV/VCR. The record tab must be intact.
1
Use the CHANNEL ▲/▼ buttons or the Num ber buttons to
select the channel you want to record.
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
2
4
7
5
8
0
6
9
Press the SPEED button until the desired recording speed
(SP or SLP) appears on the screen. Details are on page 29.
CHANNEL
ALT.CH
1
2
SLEEP/WAKE UP
SPEED
3
VOLUME
MUTE
Press the REC(ord)/OTR button repeatedly until the desired
recording length appears in the upper right corner of the screen.
Recording will begin immediately. The RECORD light will appear.
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PAUSE/STILL
OTR
LENGTH 0:30
CH12
LENGTH
CANCEL
:
:
PRESS OTR
PRESS CLEAR
4
To stop an OTR before recording is finished, press the
STOP/EJECT button on the TV/VCR.
Or, press the REC(ord)/OTR button, then press the CLEAR
button, then press the STOP/▼ button on the rem ote con-
trol.
Helpful Hints
• To check the time remaining for an
OTR after the OTR has been set,
press the STATUS/EXIT button.
• To change the recording length
while an OTR is in progress, press
the REC(ord)/OTR button until the
desired recording length appears on
the screen.
• You can not pause an OTR.
• To cancel an OTR but continue
recording, press the REC(ord)/OTR
button, then press the CLEAR but-
ton.
• You cannot record if DEFEAT
RECORDING is set to ON. Details
are on page 36.
• You can change the tape speed
with the SPEED button while a
recording is in progress, but some
distortion may appear on the tape.
Download from Www.Somanuals.com. All Manuals Search And Download.
Rerecording (Tape Duplication) 31
AUDIO and VIDEO OUT Jacks on source unit
(VCR or Camcorder)
AUDIO VIDEO
STOP
R
EJECT
EARPHONE
VIDEO AUDIO
OUT
IN
Audio Cable (white) from
AUDIO OUT to AUDIO In
AUDIO and VIDEO In
Jacks on TV/VCR
Video Cable (yellow) from
VIDEO OUT to VIDEO In
1
Make the connections shown above, using audio and video
cables. Connect the source unit (VCR or cam corder) to a
power source after connections are m ade.
2
The source unit will play your tape. Insert a prerecorded tape in
the source unit. If playback begins, press the STOP button on the
unit.
3
The TV/VCR will record your tape. Insert a blank tape in the
TV/VCR. Make sure the tape’s record tab is intact. The TV/VCR
power will turn on automatically.
4
Point the TV/VCR rem ote control at the TV/VCR. Press
Num ber buttons 0, 0 so that A/V IN appears on the screen.
5
Helpful Hints
Point the TV/VCR rem ote control at the TV/VCR. Press the
SPEED button until the desired tape speed (SP or SLP)
appears on the screen.
• Unauthorized recording of copy-
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
• If a program has copyright protec-
tion, it may not record clearly.
• Different brands of equipment may
operate differently.
6
Press the PLAY button on the source unit and the
REC(ord)/OTR button on your TV/VCR at the sam e tim e.
Copying will begin.
• Make sure all connections are
secure. Otherwise, you may not
record both picture and sound.
• Audio and video cables are not
included.
7
To stop copying, press the STOP/EJECT button on the
TV/VCR, then stop the tape on the source unit (VCR or
cam corder).
Download from Www.Somanuals.com. All Manuals Search And Download.
32 Timer Recording
Follow the steps below to program the TV/VCR to record TV
programs while you’re away from home. The TV/VCR will turn
itself on, record, and turn itself off automatically. Before you begin,
make sure:
● The clock is set. If not, CLOCK MUST BE SET appears, fol-
lowed by the SET CLOCK menu.
2-3
● Channels are set up.
● There is a tape in the TV/VCR. (Make sure the tape’s record
tab is intact and the tape is long enough to record the pro-
gram.)
Com plete each step within 60 seconds of com pleting the
previous step. If you don’t, you m ay start again at step 1.
1
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
4
7
5
8
0
6
9
CHANNEL
ALT.CH
1
Press the MENU button.
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PAUSE/STILL
REMINDER
BRIGHTNESS
2
Press the PLAY/▲ button or the STO P/▼ button to select
VCR PRO GRAM, then press the FF/SEARCH/B button.
VCR PROGRAM
> ONCE
DAILY(MON-FRI)
WEEKLY
PROGRAM REVIEW
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Helpful Hints
Press the PLAY/▲ button or the STO P/▼ button to select
a O NCE, DAILY, O R W EEKLY recording. Then, press
the FF/SEARCH/B button.
• With ShowGuard, you don’t have to
worry about losing your timer
recordings. If the power fails, pro-
grammed timer recordings will be
restored when the clock is reset.
(The clock will reset itself automati-
cally if you are using the AUTO
CLOCK feature. Details are on
pages 14-17. If you are not using
the AUTO CLOCK feature, reset the
clock manually. Details are on
pages 12-13.) The timer recording
will not occur only if the timer
recording was scheduled to take
place during the power failure.
• You cannot set a timer recording if
DEFEAT RECORDING is set to ON.
Details are on page 36.
● O NCE: The TV/VCR will record a TV program on any day you
choose, up to 12 months away.
● DAILY: The TV/VCR will record every day from Monday to
Friday – starting at the same time and recording the same channel
for the same length of time.
● W EEKLY: The TV/VCR will record the same channel on the
same day, at the same time, and for the same length of time
every week.
DAILY PROGRAM (MON-FRI)
PROGRAM -1 2 3 4 5 6 7 8-
Daily
Recording
(exam ple)
SELECT PROGRAM NUMBER
TO END PRESS EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Recording (cont’d) 33
4
Use the Num ber buttons (1-8) to select a position in
which to store the tim er recording. Flashing numbers indi-
cate an open position (one in which a timer recording has not
been stored yet).
4-7
NOTE: If you select a number that already has been used to store a
timer recording, PREVIOUSLY SET PROGRAM will appear on the screen
for a few seconds. Then information about the program in that position
will appear on the screen. If this happens, press the STATUS/EXIT but-
ton. Then use the Number buttons to select another position.
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
5
4
7
5
8
0
6
9
Use the Num ber buttons to enter the channel of the TV
program you want to record.
● If you are recording from line input, press 0, 0. A/V IN will
appear on the screen.
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
● If you are recording using a Cable Box, enter the Cable Box
output channel (03 or 04). Be sure to select the channel of the
TV program at the Cable Box and leave the Cable Box on for
the timer recording.
VOLUME
MUTE
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PAUSE/STILL
ONE TIME PROGRAM
PROGRAM
1
CHANNEL – – –
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
6
Press two Num ber buttons for the hour(s) you want the
recording to begin. Press two Num ber buttons for the
m inute(s) you want the recording to begin. Press 1 for
AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
ONE TIME PROGRAM
PROGRAM
1
CHANNEL 10
TIME ON
– – : – –
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
Helpful Hints
7
• If the numbers entered do not
match the TV/VCR’s clock or calen-
dar, the entry will be rejected and a
question mark will appear on the
screen.
Follow the instructions in step 6 to set the recording’s
stop tim e. (AM or PM will be set automatically.)
ONE TIME PROGRAM
PROGRAM
1
• To make corrections while you are
programming a timer recording,
press the CLEAR button until the
item you want to change starts
flashing. Then enter the correct
information.
CHANNEL 10
TIME ON
09:30 PM
TIME OFF – – : – –
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
Instructions continue on page 34.
Download from Www.Somanuals.com. All Manuals Search And Download.
34 Timer Recording (cont’d)
8
Press the Num ber 1 button to record in SP speed or press
the Num ber 2 button to record in SLP speed. Details about tape
speed are on page 29. You cannot use the SPEED button at this time.
ONE TIME PROGRAM
1110
PROGRAM
1
CHANNEL 10
TIME ON
09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
SP=1 SLP=2
POWER
MENU
STATUS/EXIT
CLEAR
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
1
2
3
MEMORY
4
7
5
8
0
6
9
8
CHANNEL
ALT.CH
9
9
Press two Num ber buttons for the m onth and two Num ber
buttons for the day you want the program to record. For
example, for July 10, 2000, press 07, 10. The day of the week and the
year will be displayed automatically. (You cannot program the
TV/VCR to record more than one year in advance.)
If you selected a DAILY recording at step 3, you can not enter a date
that is a Saturday or Sunday.
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PAUSE/STILL
ONE TIME PROGRAM
PROGRAM
1
CHANNEL
TIME ON
TIME OFF
REC SPEED
10
09:30 PM
11:00 PM
SLP
START DATE 07/10/2000
MONDAY
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
10
Press the STATUS/EXIT button. PROGRAM WAS COMPLET-
ED PLEASE TURN OFF FOR TIMER RECORDING will appear on
the screen.
Helpful Hints
● If there is not a tape in the TV/VCR, PLEASE INSERT CASSETTE
also appears on the screen.
• PROGRAM NOT COMPLETED /
CLASH may appear on the screen
when you finish setting a timer
recording. This means that the timer
recording you just programmed and
another timer recording overlap, and
thus the current timer recording will
not be carried out.
• To stop a timer recording that is in
progress, press the STOP/EJECT but-
ton on the TV/VCR.
To cancel the recording so that it will
not resume when the TV/VCR power
is turned off, clear the timer record-
ing. Details are on page 35.
Please see page 54 for more
Helpful Hints.
● If there is a tape without a record tab in the TV/VCR, PLEASE
REMOVE CASSETTE also appears on the screen. If this happens,
insert a different tape.
● If PROGRAM NOT COMPLETED appears, start again at step 1.
11
Press the POW ER button to turn off the TV/VCR power. The
RECORD light will flash slowly. If you forget to turn off the TV/VCR,
PLEASE TURN OFF FOR TIMER RECORDING appears on the
TV/VCR screen two minutes before a timer recording is scheduled to
begin.
Turn off the TV/VCR for the recording.
Insert a tape in the TV/VCR.
Leave the Cable Box/DBS on (if applicable).
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Recording (cont’d) 35
Checking or Clearing Tim er Recordings
2-3
1
W ith the TV/VCR on, press the MENU button.
2
1
5
Press the PLAY/▲ button or the STO P/▼ button to select
VCR PRO GRAM, then press the FF/SEARCH/B button.
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
3
4
7
5
8
0
6
9
Press the PLAY/▲ button or the STO P/▼ button to select
PRO GRAM REVIEW , then press the FF/SEARCH/B but-
ton. The timer recording information for the program in the low-
est numbered position will appear on the screen. If no timer
recordings are programmed, nothing will happen when you select
PROGRAM REVIEW and press the FF/SEARCH/B button.
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PAUSE/STILL
4
4
Press the FF/SEARCH/B button to display inform ation
about the next program m ed tim er recording. (If you do
not press a button within 10 seconds, information about the next
programmed timer recording will appear.) This will continue until
all positions have been displayed. Then, the menu will disappear.
You can exit the Program Review at any time by pressing the
STATUS/EXIT button.
5
To cancel the tim er recording displayed, press the
CLEAR button. Either the display will disappear or information
about other timer recordings will appear. If you do not press any
other buttons, the display will disappear after all timer recordings
have been displayed.
6
Helpful Hint
Repeat steps 1 - 4 to m ake sure you have cleared the cor-
rect position.
• With ShowGuard, you don’t have to
worry about losing your timer
recordings. If the power fails, pro-
grammed timer recordings will be
restored when the clock is reset.
(The clock will reset itself automati-
cally if you are using the AUTO
CLOCK feature. Details are on
pages 14-17. If you are not using
the AUTO CLOCK feature, reset the
clock manually. Details are on
pages 12-13.) The timer recording
will not occur only if the timer
recording was scheduled to take
place during the power failure.
Download from Www.Somanuals.com. All Manuals Search And Download.
36 Defeat Recording
Follow the steps below to prevent accidental recording.
2-3
1
4
1
Press the MENU button.
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
POWER
MENU
STATUS/EXIT
CLEAR
REMINDER
1
2
3
MEMORY
BRIGHTNESS
4
7
5
8
0
6
9
CHANNEL
ALT.CH
2
Press the PLAY/▲ button or the STO P/▼ button to select
SLEEP/WAKE UP
SPEED
VCR SETUP, then press the FF/SEARCH/B button.
VOLUME
MUTE
VCR SETUP
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
> ONE TIME PLAY
REPEAT PLAY
ON-SCREEN MODE
[ON]
PAUSE/STILL
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
5
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STOP/▼ button to select
DEFEAT RECORDING, then press the FF/SEARCH/B but-
ton so that ON appears beside DEFEAT RECORDING.
VCR SETUP
ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
> DEFEAT RECORDING [ON]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
Helpful Hints
4
• If you set DEFEAT RECORDING to
ON after a timer recording has
been set, the timer recording will
not occur.
• You can not program a timer
recording if DEFEAT RECORDING is
set to ON.
Press the STATUS/EXIT button.
5
Now, REC DEFEATED will flash on the screen when you
press the REC(ord)/O TR button.
REC DEFEATED
• To set DEFEAT RECORDING to
OFF, repeat steps 1-2 above. At
step 3, press the PLAY/o button or
the STOP/p button to select
DEFEAT RECORDING, then press
the FF/SEARCH/B button so that
OFF appears beside DEFEAT
RECORDING. Press the
STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Play 37
Follow the steps below to program the TV/VCR to play a tape
over and over.
2-3
1
4
1
Press the MENU button.
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
REMINDER
BRIGHTNESS
4
7
5
8
0
6
9
CHANNEL
ALT.CH
2
SLEEP/WAKE UP
SPEED
Press the PLAY/▲ button or the STO P/▼ button to select
VCR SETUP, then press the FF/SEARCH/B button.
VOLUME
MUTE
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
VCR SETUP
PAUSE/STILL
> ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
REPEAT PLAY, then press the FF/SEARCH/B button so
that O N appears beside REPEAT PLAY.
VCR SETUP
ONE TIME PLAY
> REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
Helpful Hints
4
Press the STATUS/EXIT button. Now, when a tape has fin-
ished playing, the TV/VCR will rewind it and start playback again.
(TV programming will appear while the tape is rewinding.)
• The TV/VCR will stay in Repeat Play
mode until you set ONE TIME PLAY
to ON, even if the TV/VCR is turned
off. To set ONE TIME PLAY to ON,
follow steps 1-2 above. Then, press
the PLAY/o button or the STOP/p
button to select ONE TIME PLAY.
Press the FF/SEARCH/B button so
that ON appears beside ONE TIME
PLAY. Then, press the STATUS/EXIT
button.
• The real-time counter memory will
not function during Repeat Play
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
38 A-B Repeat Play
Follow the steps below to program the TV/VCR to play the mate-
rial between two specified points (A and B) on a tape over and
over again.
Insert a tape in the TV/VCR.
1
2
1
Insert a tape in the TV/VCR.
2
POWER
MENU
STATUS/EXIT
CLEAR
Press the MENU button.
1
2
3
MEMORY
4
7
5
8
0
6
9
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
CHANNEL
ALT.CH
REMINDER
BRIGHTNESS
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
3
4
3
PAUSE/STILL
5
Press the PLAY/▲ button or the STO P/▼ button to select
VCR SETUP, then press the FF/SEARCH/B button.
VCR SETUP
> ONE TIME PLAY
REPEAT PLAY
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
[ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
4
Press the PLAY/▲ button or the STO P/▼ button to select
REPEAT PLAY.
VCR SETUP
ONE TIME PLAY
> REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
Helpful Hints
5
• To cancel A-B Repeat Play, set ONE
TIME PLAY to ON. To set ONE TIME
PLAY to ON, follow steps 2-3 above.
Then, press the PLAY/o button or the
STOP/p button to select ONE TIME
PLAY. Press the FF/SEARCH/B button
so that ON appears beside ONE
TIME PLAY. Then, press the STA-
TUS/EXIT button.
Press the FF/SEARCH/B button repeatedly so that A-B
appears beside REPEAT PLAY.
VCR SETUP
ONE TIME PLAY
> REPEAT PLAY
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
[A-B]
SELECT KL CHOOSE
TO END PRESS EXIT
B
• The end position (B) must be later on
the tape than the start position (A).
Download from Www.Somanuals.com. All Manuals Search And Download.
A-B Repeat Play (cont’d) 39
6
Press the STATUS/EXIT button to rem ove the m enu. A-B
REPEAT will appear on the screen. Beneath it, the letter A will
flash beside the real-time counter.
7-8
.
6
POWER
MENU
STATUS/EXIT
CLEAR
A-B REPEAT
0:12:34
A
1
2
3
MEMORY
4
7
5
8
0
6
9
CHANNEL
ALT.CH
7
Play, fast forward, or rewind the tape to the position at
which you want to begin playback. Stop the tape, then
press the MEMO RY button to set the start position (A).
The flashing A will become a flashing B.
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
.
PAUSE/STILL
A-B REPEAT
0:00:00
B
8
Play or fast forward the tape to the position at which you
want playback to end. Stop the tape, then press the
MEMO RY button to set the end position (B).
● The length of time between the start position (A) and the end
position (B) must be at least three minutes.
9
The TV/VCR will immediately rewind the tape to the start posi-
tion (A) and repeat playback to the end position (B) over and
over.
Helpful Hints
(TV programming will appear while the tape is rewinding.)
• The counter cannot be memorized
or reset when you are using this
feature.
• A-B Repeat Play will be cancelled if
you eject the tape or press the
REC(ord)/OTR button.
• A-B REPEAT will not appear on the
screen at step 6 if a tape is not in
the TV/VCR. NO CASSETTE will
flash on the screen briefly.
• You cannot rewind or fast forward
beyond points A or B when you are
using this feature.
• A-B Repeat Play will be retained if
you turn off the TV/VCR power.
Download from Www.Somanuals.com. All Manuals Search And Download.
40 Real-Time Counter Memory
Follow the steps below to reset the real-time counter to zero at a
tape location you want to refer to later.
1
Play, fast forward, or rewind a tape to the location that
you would like to refer to later. Stop the tape.
3
4
2
POWER
MENU
STATUS/EXIT
CLEAR
2
1
2
3
MEMORY
Press the STATUS/EXIT button. The real-time counter will
appear on the screen.
4
7
5
8
0
6
9
CHANNEL
ALT.CH
01:08 PM
CH10
STOP
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
SLP
1 : 23 : 45
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PAUSE/STILL
3
W hile the counter rem ains on the screen, press the
CLEAR button to reset the real-tim e counter to zero.
0 : 00 : 00
1,5
4
W hile the counter rem ains on the screen, press the MEM-
O RY button so that M appears on the screen. To erase a
real-time counter memory, press the MEMORY button so that the
M disappears from the screen.
M 0 : 00 : 00
5
Helpful Hints
To go to a tape location where the real-tim e counter was
reset to zero, press the REW (ind)/SEARCH/s button or
the FF/SEARCH/B button when playback is stopped.
W hen the tape reaches the point at which the counter
was set to zero, the tape will stop. Press the PLAY/o but-
ton to watch the tape.
• The real-time counter memory will
not function during Repeat Play
mode or A-B Repeat Play mode.
Details are on pages 37-39.
• You may only set one real-time
counter memory at a time. If you
set the real-time counter to zero at
a second location, the previous real-
time counter to zero setting will be
lost.
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Options 41
Forward and Reverse Searching (SP/LP/SLP)
1
During tape playback, press and release the FF/SEARCH/B button
or the REW(ind)/SEARCH/{ button. A fast forward or reverse
picture search will begin.
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
2
4
7
5
8
0
6
9
To return to normal playback, press the PLAY/▲ button.
CHANNEL
ALT.CH
Super High Speed Searching (LP/SLP)
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
1
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
During tape playback, press the FF/SEARCH/B button or the
REW(ind)/SEARCH/{ button, then press again. The TV/VCR will
now search in super high speed.
PAUSE/STILL
2
To return to normal playback, press the PLAY/▲ button.
Viewing a Still Picture
1
During tape playback, press the PAUSE/STILL button. A still pic-
ture will appear on the screen. The noise lines will move each
time you press the PAUSE/STILL button.
Helpful Hints
• Still mode will automatically switch
to Stop mode after five minutes to
protect the TV/VCR and the tape
from damage.
• SP/LP/SLP means this feature will
work with tapes recorded in
Standard Play, Long Play, or Super
Long Play. For details about tape
speed, see page 29.
2
To release the still picture and return to normal playback, press
the PLAY/▲ button.
• LP/SLP means this feature will work
with tapes recorded in Long Play
and Super Long Play. For details on
tape speed, see page 29.
• During forward and reverse search-
ing, horizontal noise bars will
appear on the TV/VCR screen.
• Tapes recorded in SLP speed will
have the clearest picture during for-
ward and reverse searching and Still
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
42 SmartLock
SmartLock enables parents to prevent their children from watch-
ing inappropriate material on TV.
2,4
SmartLock reads the ratings for programming (except for news
and sports programs, unedited movies on premium cable channels,
and Emergency Broadcast System signals), then denies access to
programming if the program’s rating meets or exceeds the limita-
tions you select. The ratings are defined on page 45.
To block ratings, follow the steps below.
1
3
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
4
7
5
8
0
6
9
1
CHANNEL
ALT.CH
Press the MENU button.
>
SMARTLOCK
REVIEW
PRESS
B
SLEEP/WAKE UP
SPEED
EXIT
VOLUME
MUTE
PRIM. SETUP
VCR PROGRAM
VCR SETUP
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PAUSE/STILL
2
Press the PLAY/▲ button or the STO P/▼ button to select
SMARTLO CK. Then, press the FF/SEARCH/B button.
SMARTLOCK
_ _ _ _
Enter Your Access Code
Helpful Hints
3
Use the Num ber buttons to enter your access code.
The default code is 0711. If you have not set up your personal
access code, you should use 0711. (To set up your personal
access code, see page 44.)
• If the “Incorrect Access Code...” mes-
sage appears after step 3, enter the
correct access code.
• Programming may be rated by the
Motion Picture Association of America
(MPAA) or according to the Television
Parental Guidelines. In order to block
any inappropriate programming, set
your limits in both places (Movie
Ratings and Parental Guidelines).
You will complete steps 1-7 twice,
choosing Movie Ratings at step 5 the
first time, then choosing Parental
Guidelines at step 5 the second time.
• You can not view tape playback if the
rating of the tape is blocked.
• If you enter the access code once,
you may change channels without
seeing the “CHANNEL XX
BLOCKED” message again. If you
turn off the TV/VCR power, you will
be asked for the access code again
when you tune to a blocked channel.
The SMARTLOCK menu will appear.
SMARTLOCK
X X X -
Enter Your Access Code
4
Press the PLAY/▲ button or the STO P/▼ button to select
BLO CK. Then, press the FF/SEARCH/B button.
SMARTLOCK
> BLOCK
CHANGE CODE
SELECT KL CHOOSE
TO END PRESS EXIT
B
Download from Www.Somanuals.com. All Manuals Search And Download.
SmartLock (cont’d) 43
5-6
5
Press the PLAY/▲ button or the STO P/▼ button to select
Movie Ratings or Parental Guidelines. Then, press the
FF/SEARCH/B button.
BLOCK
> Movie Ratings
Parental Guidelines
7
POWER
MENU
STATUS/EXIT
CLEAR
SELECT KL CHOOSE
TO END PRESS EXIT
B
1
2
3
MEMORY
4
7
5
8
0
6
9
CHANNEL
ALT.CH
6
Press the PLAY/▲ button or the STO P/▼ button to select
the rating you want to block. Then, press the
FF/SEARCH/B button so that O N appears beside the rat-
ing.
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
For example, if you set PG to ON, you may not view PG pro-
gramming because the block is on. Programs with a PG or higher
rating will be blocked. A “CHANNEL XX BLOCKED...” message
will appear when someone tries to access such programming.
PAUSE/STILL
PARENTAL GUIDELINES
MOVIE RATINGS
> TV-Y
TV-Y7
- - - - - - - - - - - - - - - -
TV-G
TV-PG
TV-14
TV-MA
[OFF]
>
>G
PG
PG-13
R
NC-17
X
[OFF]
[ON]
[ON]
[ON]
[ON]
[ON]
[OFF]
>
>
>
SELECT KL CHOOSE
TO END PRESS EXIT
B
SELECT KL CHOOSE
TO END PRESS EXIT
B
● More specific sub-ratings are available for TV-Y7, TV-PG, TV-14,
and TV-MA. (See example below.) When you press the
FF/SEARCH/B button to turn on TV-Y7, TV-PG, TV-14 or TV-
MA, additional sub-ratings will appear.
If you select the rating category, such as TV-PG, and turn it on
or off, the specific sub-ratings, such as V for Violence, will turn
on or off automatically. You can always turn specific sub-ratings
on or off by selecting them individually. However, you may only
set a sub-rating to ON if the rating category is set to ON.
● Ratings are defined on page 45.
Helpful Hints
• If the “CHANNEL XX BLOCKED...”
or “PLAYBACK BLOCKED...” mes-
sage appears and you want to view
this programming, enter your access
code. The channel (or tape play-
back) will remain blocked until you
enter the correct code. If you do not
know the code, you will have to
select another channel (using the
CHANNEL o/p buttons) or press
the STOP/p button.
Exam ple
of specific
sub-ratings
TV-PG
> TV-PG
[ON]
D
L
S
[ON]
[ON]
[OFF]
[OFF]
V
SELECT KL CHOOSE
B
TO END PRESS EXIT
• Ratings will remain blocked even
after a power failure.
• You cannot access the menu when
the “CHANNEL XX BLOCKED...” or
“PLAYBACK BLOCKED...” message
appears.
7
Press the STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
44 SmartLock (cont’d)
To change the access code, follow these steps.
1
2,4
Press the MENU button.
>
SMARTLOCK
REVIEW
PRESS
B
6
1
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
2
4
7
5
8
0
6
9
Press the PLAY/▲ button or the STO P/▼ button to select
CHANNEL
ALT.CH
5
3
SMARTLO CK. Then, press the FF/SEARCH/B button.
SMARTLOCK
_ _ _ _
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
Enter Your Access Code
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PAUSE/STILL
3
Use the Num ber buttons to enter your old access code.
The default code is 0711. If you have never set up your personal
access code, use 0711 now.
After you enter the code, the SMARTLOCK menu will appear.
SMARTLOCK
X X X -
Enter Your Access Code
Helpful Hints
4
• In order to protect the privacy of
the access code, an X will appear
on the screen instead of the num-
ber you enter.
Press the PLAY/▲ button or the STO P/▼ button to select
CHANGE CO DE. Then, press the FF/SEARCH/B button.
SMARTLOCK
BLOCK
• If a “Wrong Code...” message
appears on the screen after you
complete step 5, you entered the
wrong numbers in the Confirm Code
space. Repeat the steps on this
page.
• You cannot use the default code
after you set up your personal
access code.
> CHANGE CODE
SELECT KL CHOOSE
TO END PRESS EXIT
B
5
Use the Num ber buttons to enter your desired access code
in the New Code space. Then, enter the sam e code in the
Confirm Code space.
• If a power failure occurs, the
default code, 0711, will be the
active access code again.
Your new access code should be recorded. You will return to the
SMARTLOCK menu.
• If you connect the power cord to an
AC outlet that is controlled by a wall
switch, your personal access code
will be erased every time you turn
off the power at the wall switch.
The default code will be the active
code again.
_ _ _ _
New Code
Confirm Code
_ _ _ _
6
Press the STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
SmartLock (cont’d) 45
To check the SmartLock settings, follow these steps.
1
Press the MENU button.
>
REVIEW
PRESS
B
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
3
2
1
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
2
4
7
5
8
0
6
9
Press the PLAY/▲ button or the STO P/▼ button to select
REVIEW . Then, press the FF/SEARCH/B button so that
the Sm artLock settings appear.
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
Ratings that are blocked will appear on the screen.
An “X” will appear if a specific sub-rating is blocked, such as V for
Violence in the TV-14 category.
VOLUME
MUTE
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
BLOCKED RATINGS
Movie Ratings
PAUSE/STILL
G
PG-13
NC-17
Parental Guidelines
TV-Y7
- - - - - - - - - - - - - - - - - - - -
TV-G
D
L
S
x
x
x
V
x
x
x
TV-PG
TV-14
TV-MA
x
–
x
x
3
Press the STATUS/EXIT button.
RATING EXPLANATIO NS
For Movie Ratings
• G - General Audience
• PG - Parental Guidance suggested.
• PG-13 - Unsuitable for children under 13
• R - Restricted; under 17 requires accompanying parent or adult
guardian
• NC-17 - No one under 17 admitted
• X - Mature audience only
For Parental Guidelines
• V - Violence
• S - Sexual situations
• L - Language
• D - Inappropriate dialogue
• FV - Fantasy Violence may frighten children under seven; TV-Y7
category only. Some cartoons may have this rating.
• TV-Y - Appropriate for all children
• TV-Y7 - Appropriate for children seven and older
• TV-G - General Audience
• TV-PG - Parental Guidance suggested.
• TV-14 - Unsuitable for children under 14
• TV-MA - Mature audience only
Download from Www.Somanuals.com. All Manuals Search And Download.
46 Wake Up Timer
The Wake Up Timer turns on the TV/VCR automatically at a speci-
fied time within the next 24 hours. You may set the TV/VCR to turn
on at a TV channel (the channel at which the TV/VCR was set last)
or with VCR playback. To set the Wake Up Timer, follow the steps
below. Before you begin:
● Make sure the clock is set. If the clock has never been set,
CLOCK MUST BE SET will appear on the screen after you select
WAKE UP at step 2. Then the SET CLOCK menu will appear.
● Make sure a tape is in the TV/VCR if you want the TV/VCR to
start tape playback at the specified time.
2-3
5
4
● Make sure no timer recordings are set for the time at which you
want the TV/VCR power to come on.
POWER
MENU
STATUS/EXIT
CLEAR
1
4
7
2
3
MEMORY
5
8
0
6
9
1
Press the SLEEP/W AKE UP button.
CHANNEL
ALT.CH
TO ADJUST PRESS s/B
–TIMER–
SLEEP/WAKE UP
SPEED
>
SLEEP
WAKE UP
ON-TIME
OFF
VOLUME
MUTE
1
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PAUSE/STILL
2
Press the PLAY/o button or the STOP/p button to select
W AKE UP. Then, press the REW (ind)/SEARCH/s button
or the FF/SEARCH/B button to select TV ON or VCR ON.
TO ADJUST PRESS s/B
–TIMER–
SLEEP
WAKE UP
ON-TIME
>
TV ON
3
o
p
Press the PLAY/ button or the STOP/ button to select
s
ON-TIME. Then, press the REW (ind)/SEARCH/ button or
B
the FF/SEARCH/ button to select your desired wake up
s
tim e. Each press of the REW(ind)/SEARCH/ button or the
B
FF/SEARCH/ button will increase (or decrease) the time by 10
minutes.
TO ADJUST PRESS s/B
–TIMER–
SLEEP
WAKE UP
ON-TIME
12:00 AM
>
Helpful Hint
• To cancel the Wake Up Timer, press
the SLEEP/WAKE UP button. Press
the PLAY/o button or the STOP/p
button to select WAKE UP. Then,
4
Press the STATUS/EXIT button.
s
press the REW(ind)/SEARCH/ but-
5
B
ton or the FF/SEARCH/ button to
select OFF. Press the STATUS/EXIT
button.
Press the POW ER button to turn off the TV/VCR. The
TV/VCR will turn itself on at the specified tim e.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sleep Timer 47
Use the Sleep Timer to program the TV/VCR to shut off in a cer-
tain amount of time.
1
Press the SLEEP/W AKE UP button.
TO ADJUST PRESS s/B
–TIMER–
>
SLEEP
WAKE UP
ON-TIME
OFF
3
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
2
4
7
5
8
0
6
9
o
p
Press the PLAY/ button or the STO P/ button to select
SLEEP. Then press the REW (ind)/SEARCH/s button or
the FF/SEARCH/B button to select 30 MIN(utes), 60
MIN(utes), 90 MIN(utes), or 120 MIN(utes). (You can not
set the Sleep Timer during a recording.)
CHANNEL
ALT.CH
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
1
TO ADJUST PRESS s/B
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
–TIMER–
2
PAUSE/STILL
>
SLEEP
WAKE UP
ON-TIME
30 MIN
3
Press the STATUS/EXIT button. The TV/VCR will shut itself
off after the specified amount of time.
One minute before the TV/VCR shuts itself off, the seconds will
count down on the screen.
GOOD NIGHT appears on the TV/VCR screen 10 seconds
before the TV/VCR shuts itself off.
Helpful Hints
• To cancel the Sleep Timer, press
the SLEEP/WAKE UP button. Press
the PLAY/o button or the STOP/p
button to select SLEEP, then press
s
the REW(ind)/SEARCH/ button or
B
the FF/SEARCH/ button to select
OFF. Press the STATUS/EXIT but-
ton.
• To see how much time remains
before the TV/VCR shuts itself off,
press the SLEEP/WAKE UP button
once. Press the PLAY/o button or
the STOP/p button to select SLEEP
if necessary. To remove the display,
press the STATUS/EXIT button.
• The Sleep Timer will be cancelled if
you make a recording after you set
the Sleep Timer.
Download from Www.Somanuals.com. All Manuals Search And Download.
48 Closed Caption
When you watch a program that is being broadcast with closed
captions, you can access on-screen boxes containing the pro-
gram’s dialogue (for example, what a character is saying), dialogue
in a foreign language, or information (such as a channel guide,
schedule, or announcements). Follow the steps below to select
closed captions.
Not all TV programs and commercials are broadcast with closed
captions. Similarly, all types of closed captions (second language,
half-screen text, etc.) are not always broadcast. If closed caption-
ing is not broadcast, you cannot receive it. This does not indicate
a problem with the TV/VCR. Refer to your area’s TV program
listings for the shows offered with closed captions.
1
3
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
4
7
5
8
0
6
9
CHANNEL
ALT.CH
1
Press the MENU button.
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PAUSE/STILL
REMINDER
BRIGHTNESS
2
2
Press the PLAY/▲ button or the STO P/▼ button to select
CAPTIO N.
TO ADJUST PRESS { /
B
OFF
>
CAPTION
REMINDER
BRIGHTNESS
PICTURE
COLOR
TINT
3
Press the REW (ind)/SEARCH/{ button or the
FF/SEARCH/B button to select your desired m ode.
The selected closed caption mode will appear beside CAPTION
on the screen.
● CAPTION1 displays standard closed captions (what a character
is saying).
● CAPTION2 displays foreign language closed captions (foreign
language words showing what a character is saying).
● TEXT1 and TEXT2 display half-screen text (such as a channel
guide, schedule, or announcement).
● OFF turns closed captions off. Captions will not appear on the
screen.
Helpful Hints
• When you change channels, the
closed captions may be delayed for
a few seconds.
• When you adjust the volume or
mute the volume, closed captions
may be delayed for a few seconds.
Details are on page 51.
TO ADJUST PRESS { /
B
Exam ple:
CAPTIO N1
Menu
CAPTION1
>
CAPTION
REMINDER
BRIGHTNESS
PICTURE
COLOR
Screen
TINT
Download from Www.Somanuals.com. All Manuals Search And Download.
Closed Caption (cont’d) 49
4
Press the STATUS/EXIT button. The type of closed captions
you selected at step 3 will appear on the screen.
4
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
4
7
5
8
0
6
9
HELLO
CHANNEL
ALT.CH
Standard Closed Captions
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
PAUSE/STILL
WORLD WEAATHER
5 C
8 C
7 C
23:00
20:00
4:00
CLOUD
RAIN
CLOUD
NYL
LOS
LONDON
Half-screen text
Helpful Hints
• You cannot view closed captions dur-
ing recording or tape playback if
COUNTER ONLY is set to ON.
Details are on page 26.
• If STATUS is set to ON, closed cap-
tions will be interrupted briefly when
you insert or remove a tape. Details
are on page 26.
• Abbreviations, symbols, and other
grammatical shortcuts are often used
in order to keep pace with the on-
screen action. This does not indicate
a problem with the TV/VCR.
• To cancel closed captions, follow
steps 1-2 on page 48. At step 3,
press the REW(ind)/SEARCH/{ but-
ton or the FF/SEARCH/B button to
select OFF. Press the STATUS/EXIT
button.
Download from Www.Somanuals.com. All Manuals Search And Download.
50 Blue Background
If you want the TV screen to be solid blue when a weak signal is
received, set BLUE BACKGROUND to ON. The screen will be
blue and the sound will be muted. Or, if you want to receive the
weak signal, set BLUE BACKGROUND to OFF. When you select
a channel that is receiving a weak signal, you will see and hear the
static in the TV programming.
2-3
To set BLUE BACKGROUND to ON or OFF, follow the steps
below.
4
1
1
POWER
MENU
STATUS/EXIT
CLEAR
Press the MENU button.
1
2
3
MEMORY
4
7
5
8
0
6
9
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
CHANNEL
ALT.CH
REMINDER
BRIGHTNESS
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
2
PAUSE/STILL
Press the PLAY/o button or the STO P/p button to select
VCR SETUP, then press the FF/SEARCH/B button.
VCR SETUP
> ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/o button or the STO P/p button to select
BLUE BACKGRO UND. Then, press the FF/SEARCH/B but-
ton repeatedly so that O FF (or O N) appears beside BLUE
BACKGRO UND.
VCR SETUP
ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
> BLUE BACKGROUND [ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
4
Press the STATUS/EXIT button.
Helpful Hint
• A blue screen may appear briefly
between channel changes if BLUE
BACKGROUND is set to ON. To
avoid having the brief blue screen,
set BLUE BACKGROUND to OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
Volume Bar 51
Usually, the volume bar appears when you press the VOLUME
▲/▼ buttons. If you do not need it, set the VOLUME BAR to
OFF. For example, when you watch a program that is being broad-
cast with closed captions, you may choose to set the VOLUME
BAR to OFF so the captions can remain on the screen. The cap-
tions will remain on the screen even when you press the VOL-
UME ▲/▼ buttons or the MUTE button.
2-3
4
1
1
Press the MENU button.
POWER
MENU
STATUS/EXIT
CLEAR
1
2
3
MEMORY
4
7
5
8
0
6
9
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
CHANNEL
ALT.CH
REMINDER
BRIGHTNESS
SLEEP/WAKE UP
SPEED
VOLUME
MUTE
2
REW/SEARCH
REC/OTR
PLAY/
STOP/
FF/SEARCH
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the FF/SEARCH/B button.
PRIMARY SETUP
PAUSE/STILL
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
SET CLOCK
[OFF]
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
VO LUME BAR, then press the FF/SEARCH/B button.
Each press of the FF/SEARCH/B button will turn the VOLUME
BAR ON or OFF.
PRIMARY SETUP
SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
> VOLUME BAR
SET CLOCK
[ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
4
Press the STATUS/EXIT button.
Download from Www.Somanuals.com. All Manuals Search And Download.
52 Automatic Operation Features
The following playback features will always operate.
Autom atic Playback
When you put a tape in the TV/VCR, the power will come on
automatically. If the tape’s record tab is missing, playback will
begin. If a timer recording is set, the power will not come on
automatically when you insert a tape with the record tab intact. If
a timer recording is set and the TV/VCR power is off, the
TV/VCR will eject the tape if the record tab is missing.
Autom atic Rewind, Eject, O ff
When a tape is played, fast forwarded, or recorded to its end, the
TV/VCR will rewind the tape, stop, turn itself off, and eject the
tape. If a real-time counter memory is set, the TV/VCR may only
rewind the tape to the point at which the real-time counter is set
to zero. The TV/VCR will not turn itself off or eject the tape.
Mem ory Rewind, Power O ff
When the POWER button is pressed while the TV/VCR is rewind-
ing a tape, REW → POWER OFF will appear on the screen. The
TV/VCR will turn itself off when the tape has finished rewinding.
If a real-time counter memory is set, the TV/VCR may only
rewind the tape to the point at which the counter was set to
zero, then turn itself off.
Tape Eject
A tape can be ejected with the TV/VCR power on or off (but the
TV/VCR must be plugged in). If a timer recording is programmed,
a tape can not be ejected when the power is off. Turn on the
TV/VCR power, then eject the tape. Be sure to insert a tape and
turn off the TV/VCR power for the timer recording.
Autom atic Tracking Adjustm ent
The TV/VCR automatically adjusts the tracking to give you the
best possible picture quality. With some recordings, however,
you may get a better picture using the manual tracking controls
(see below).
Manual Tracking
To adjust the tracking manually, press the CHANNEL o/p but-
tons on the TV/VCR.
Tracking returns to Automatic Tracking Adjustment when a tape
is inserted or when the STOP/p button is pressed.
Before
Tracking
Adjustment
After
Tracking
Adjustment
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications 53
General
CRT: 13-inch in line gun (CC13B1MG)
19-inch in line gun (CC19B1MG)
Television system: NTSC-M
Closed caption system: Section 15.119, FCC
(Federal Communications Commission) Standard
Video Heads: Two heads
Tape width: 1/2 inch (12.65 mm)
Tape speed
SP: 33.35 mm/sec.
LP: 16.67 mm/sec.
SLP: 11.12 mm/sec.
Operating Temperature: 41˚F (5˚C) to 104˚F (40˚C)
Relative Humidity: 10% to 75%
Power requirement: AC 120V, 60Hz
Power consumption: 65W (CC13B1MG)
90W (CC19B1MG)
Sound output: 1W
Dimensions:
15-3/4" (H) x 15-3/16" (W) x 14-13/16" (D)
400mm x 386mm x 377mm
19-11/16" (H) x 19-7/16" (W) x 18-5/16" (D)
500mm x 494mm x 465mm
Weight: 24.3 lbs (11.0 kg) (CC13B1MG)
Weight: 44.1 lbs (20.0 kg) (CC19B1MG)
(CC13B1MG)
(
)
CC19B1MG
Tuner Broadcast Channels
VHF 2-13, UHF 14-69
Cable TV Channels
1-125
Term inals
Antenna In: VHF/UHF 75 ohms unbalanced
Video In: RCA connector
Audio In: RCA connector
Earphone: 3.5 mm CES
Electrical Specifications
Video input level: 0.5~2.0Vp-p
Audio input level: -10dBv
Video S/N ratio
SP: More than 42dBµ
Audio S/N ratio
SP: More than 38dB
Designs and specifications are subject to change without notice and without our
legal obligation.
Download from Www.Somanuals.com. All Manuals Search And Download.
54 Helpful Hints
If you are having problems with your product, check this list of problems and possible solutions before
requesting service. You may be able to solve the problem yourself.
If you need to call a customer service representative, please know the model number and serial number
of your product before you call. This information is displayed on the back of the product. Also, please
take a moment to identify the problem you are having, and be prepared to explain this to the representa-
tive. If you believe the representative will need to help you with operations, please stay near the product.
Our representatives will be happy to assist you.
Location
For safe operation and satisfactory performance of your TV/VCR, remember the following:
• Shield it from direct sunlight and keep it away from sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom of
the TV/VCR. Do not place the TV/VCR on a carpet, as this will block the ventilation openings.
• Avoid locations subject to strong vibrations.
• Do not place the TV/VCR near strong magnetic fields.
• Do not move the TV/VCR from a cold place to a hot place, or vice versa.
Electrical Shock and Fire Hazards
• Do not handle the power cord with wet hands.
• Do not pull the power cord when disconnecting the TV/VCR from the AC (alternating current) wall out-
let. Grasp it by the plug.
• If water is spilled on the TV/VCR, unplug the power cord immediately and take the TV/VCR to an autho-
rized service center.
• Do not put your fingers or objects into the TV/VCR cassette compartment.
• Do not place anything on top of the TV/VCR.
Dew W arning (Moisture Condensation)
• Moisture may condense inside the unit when it is moved from a cold place to a warm place, after heating a
cold room, or when the humidity is high. There is no warning that moisture has accumulated in your
TV/VCR. If you try to play a tape in a TV/VCR in which moisture has accumulated, the tape and the
TV/VCR could be damaged. If you think moisture may have accumulated inside the TV/VCR, keep the
TV/VCR power on (but do not play a tape) for at least two hours. This will allow the TV/VCR to dry.
TV/VCR will not perform a tim er recording.
• Make sure the recording start and stop times are set correctly. Details are on pages 32-35. Midnight is 12
a.m. Noon is 12 p.m.
• Make sure the TV/VCR power is off.
• Make sure the clock is set. Details are on pages 12-17.
• Make sure there is a tape in the TV/VCR. The tape must have a record tab.
• With ShowGuard, you don’t have to worry about losing your timer recordings. If the power fails, pro-
grammed timer recordings will be restored when the clock is reset. (The clock will reset itself automati-
cally if you are using the AUTO CLOCK feature. Details are on pages 14-17. If you are not using the
AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13.) The timer recording will not
occur only if the timer recording was scheduled to take place during the power failure.
• Make sure DEFEAT RECORDING is set to OFF. Details are on page 36.
TV/VCR will not record.
• Make sure the tape has a record tab. Details are on page five.
• Make sure DEFEAT RECORDING is set to OFF. Details are on page 36.
• Plug the power cord into an active AC outlet. Details are on page seven.
• Check your hookups. Details are on pages six-seven.
• Set up the channels. Details are on page 10.
TV/VCR has no power.
• Make sure the power plug is completely connected to an AC (alternating current) outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Helpful Hints (cont’d) 55
The rem ote control is not available, or the rem ote control will not access the pop up m enu.
• Use the buttons on the front panel of the TV/VCR to access the pop up menu. You can not enter numbers
(for example, to program a timer recording) using the front panel buttons. Details are on page 20.
TV/VCR power shuts off after 15 m inutes.
• To save energy, the TV/VCR will shut itself off after 15 minutes when it is on a channel that is not receiving
a broadcast signal (for example, a station that has gone off the air for the night). This is normal.
Channel reception is poor.
• Check connections, then set up the channels again. Details are on page 10.
TV/VCR does not have a picture.
• Adjust the antenna. Details are on page six.
• Adjust the TV/VCR picture controls. Details are on pages 24-25.
TV/VCR has poor sound or no sound.
• Adjust the volume.
• Press the MUTE button to restore the volume.
Tape playback is poor or tape is destroyed.
• Adjust the tracking. Details are on page 52.
• If moisture has accumulated in your TV/VCR, keep the power on for at least two hours, but do not try to
play a tape. Details are on page 54.
TV/VCR does not display closed captions.
• Make sure COUNTER ONLY is set to OFF. Details are on page 26.
• Make sure closed captioning is available for the program. Refer to the TV listings in your local newspaper.
Rem ote control does not operate TV/VCR.
• Aim the remote control directly at the TV/VCR’s remote sensor. Details are on pages five and 20.
• Remove all obstacles between the remote control and the TV/VCR.
• Inspect and replace the batteries in the remote control. Details are on page five.
Num ber buttons won’t work for channels above 69.
• Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter channel
numbers as a three-digit number. Details are on page 22.
• If you are using an antenna, only channels 2-69 will be available.
A tape can’t be inserted into the TV/VCR.
• Insert the tape window side up, with the record tab facing you.
• Make sure a tape isn’t already in the TV/VCR by pressing the STOP/EJECT button on the TV/VCR.
• Gently push on the center of the tape. Never force a tape into the TV/VCR.
• If a timer recording is set and the TV/VCR power is off, the TV/VCR will eject the tape if the record tab is
missing.
A tape can’t be rem oved from the TV/VCR.
• Make sure the power plug is completely connected to an AC (alternating current) outlet.
• If a timer recording is programmed, turn on the TV/VCR power, then eject the tape. Be sure to insert a
tape and turn off the TV/VCR power for the timer recording.
TV/VCR ejects the tape when you try to start a recording.
• Make sure the tape has a record tab. Details are on page five.
The cylinder rotates when tape playback is stopped.
• To enable the quick play mechanism, the cylinder will rotate for about five minutes. This is normal. The
quick play mechanism switches the tape mechanism from Stop to Play in just one second.
Download from Www.Somanuals.com. All Manuals Search And Download.
56 Glossary
AUDIO In Jack: jack located on the front of the TV/VCR which
is used to record audio from another source.
Autom atic Channel Setup: process in which the TV/VCR
scans all available channels and places the ones you receive in its
memory. Then, when you push the CHANNEL o/p buttons,
you only scan through channels you receive.
Bands: settings that allow you to tune channels.
• Antenna – VHF (very high frequency; channels
2-13) and UHF (ultra high frequency; channels
14-69).
• Cable – all standard channels can be received without a Cable
Box.
Brightness: adjusting increases or decreases the brightness of
the color on the screen.
Color: adjusting pales or brightens the TV/VCR color.
Dubbing: copying a tape using a VCR.
HQ : high quality; a feature in the TV/VCR circuitry which pro-
vides enhanced picture detail.
Line Input: The channel to which you set your TV/VCR during
dubbing. The line input channel is always channel 00 (A/V IN).
Mode: a TV/VCR operation.
O TR: One-Touch Recording; a timed recording that starts
immediately and records for 30 minutes to eight hours, whichev-
er you specify.
Picture: adjusting increases or decreases the contrast of the pic-
ture on the screen.
Sharpness: adjusting softens or clarifies the picture on the screen.
Tape Speeds: how fast the tape travels during playback or
recording.
• SP (standard play) – fastest tape speed (recording time for a
T120 tape is approximately two hours); best picture quality.
• LP (long play) – average tape speed; playback only.
• SLP (super long play) – slowest tape speed (recording time for
a T120 tape is approximately six hours).
Tint: adjusting changes the tints of the picture on the TV/VCR
from purple to green.
VIDEO In Jack: jack located on the front of the TV/VCR which
is used to record video from another source.
Download from Www.Somanuals.com. All Manuals Search And Download.
RENEWED
90 DAY
LIMITED WARRANTY
Download from Www.Somanuals.com. All Manuals Search And Download.
58 Index
a-b repeat play . . . . . . . . .38-39
accessories . . . . . . . . . . . . . . .60
ant(enna) jack . . . . . . . . . . .6, 21
audio in jack . . . . . . . . .7, 20, 31
automatic
memory
button . . . . . . . . . . .23, 38-40
real-time counter . . . . . . . .40
rewind, power off . . . . . . .52
menu
button . . . . . . . . . . . . . . . .22
front panel button access . .20
mute button . . . . . . . . . . . . . .23
specifications . . . . . . . . . . . . .53
sqpb . . . . . . . . . . . . . . . . . . . .28
standard play . . . . . . . . . .29, 56
status display . . . . . . . . . . . . .26
status/exit button . . . . . . .22, 26
still picture . . . . . . . . . . . . . . .41
stop/p button . . . . . . . . . . . .22
stop/eject button . . . . . . . . . .20
super high speed searching . . .41
super long play . . . . . . . . .29, 56
playback . . . . . . . . . . . . . . .52
rewind . . . . . . . . . . . . . . . .52
batteries . . . . . . . . . . . . . . . . . .5
blue background . . . . . . . . . . .50
brightness, adjusting . . . . .24-25
number buttons . . . . . . . . . . .22
one-touch recording . . . . . . . .30
table of contents . . . . . . . . . . .4
tape
channel
above 100 . . . . . . . . . . . . .22
adding . . . . . . . . . . . . . . . .11
buttons . . . . . . . . . .20, 23, 52
deleting . . . . . . . . . . . . . . .11
reviewing . . . . . . . . . . . . . .11
setup . . . . . . . . . . . . . . . . .10
clear button . . . . . . . . . . . . . .22
clock . . . . . . . . . . . . . . . . .12-17
closed caption system . . . .48-49
color, adjusting . . . . . . . . .24-25
connections . . . . . . . . . . .6-7, 31
contents, table of . . . . . . . . . . .4
controls
pause/still button . . . . . . .23, 41
picture, adjusting . . . . . . . .24-25
play button . . . . . . . . . . . .20, 23
playback options . . . . . . . . . . .41
playing . . . . . . . . . . . . . . . . . .28
power
duplication . . . . . . . . . . . . .31
speed . . . . . . . . . . . . . .29, 56
time
setting . . . . . . . . . . . . . .12-17
zone . . . . . . . . . . . . . . . . . .19
timer recording
cancelling . . . . . . . . . . . . . .35
reviewing . . . . . . . . . . . . . .35
setting . . . . . . . . . . . . . .32-34
tint, adjusting . . . . . . . . . . .24-25
tracking . . . . . . . . . . . . . . . . .52
button . . . . . . . . . . . . .20, 22
cord . . . . . . . . . . . . . . . .7, 21
real-time counter memory . . .40
rear panel . . . . . . . . . . . . . . . .21
rec/otr button . . . . . . . . .20, 22
record light . . . . . . . . . . . . . .20
recording . . . . . . . . . . . . . . . .29
recording prevention . . . . . . . .5
reminder . . . . . . . . . . . . . . . .27
remote
video in jack . . . . . . . . .7, 20, 31
volume bar . . . . . . . . . . . . . . .51
remote . . . . . . . . . . . . .22-23
tv/vcr . . . . . . . . . . . . . . . . .20
counter only mode . . . . . . . . .26
wake up timer . . . . . . . . . . . .46
warranty . . . . . . . . . . . . . . . . .57
daylight-savings time . . . . . . . .18
defeat recording . . . . . . . . . . .36
duplication . . . . . . . . . . . . . . .31
control
buttons . . . . . . . . . .22-23
using . . . . . . . . . . . . . . . .5
sensor . . . . . . . . . . . . . . . .20
repeat play . . . . . . . . . . . . . . .37
rerecording . . . . . . . . . . . . . .31
rew(ind) button . . . . . . . . . . .20
rew(ind)/search/{ button 23, 41
rewinding . . . . . . . . . . . . . . . .41
earphone jack . . . . . . . . . . . . .20
fast forward search . . . . . . . . .41
ff/search/B button . . . . . .23, 41
f.fwd button . . . . . . . . . . . . . .20
front panel . . . . . . . . . . . . . . .20
safety precautions . . . . . . . . . .3
searching . . . . . . . . . . . . . . . .41
sensor (remote) . . . . . . . . . . .20
sharpness, adjusting . . . . . .24-25
showguard . . . . . . . . .32, 35, 54
sleep timer . . . . . . . . . . . . . . .47
slp . . . . . . . . . . . . . . . . . .29, 56
smartclock . . . . . . . . . . . . .14-17
smartlock . . . . . . . . . . . . .42-45
sp . . . . . . . . . . . . . . . . . .29, 56
glossary . . . . . . . . . . . . . . . . .56
helpful hints . . . . . . . . . . . .54-55
hookups . . . . . . . . . . . . .6-7, 31
language selection . . . . . . . . . . .9
line input mode . . . . . .10, 31, 56
long play . . . . . . . . . . . . . .29, 56
lp . . . . . . . . . . . . . . . . . .29, 56
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
SUPPLIED ACCESSO RIES
The following items are supplied with your TV/VCR; they
are provided to help you use or set up your TV/VCR.
POWER
MENU
1
STATUS/EXIT
2
CLEAR
4
3
5
MEMORY
7
6
8
9
CHANNEL
0
ALT.C
VOLUME
MUTE
PLAY/
SLEEP/MAKE UP
REW/SEARCH
SPEED
REC/OTR
FF/SEARCH
STOP/
PAUSE/STILL
Remote Control 4835 218 37278
Two AA Batteries 4835 138 17012
O PTIO NAL ACCESSO RIES
The following additional items are not provided with your
TV/VCR, but they are designed for use with your new TV/VCR.
To order these optional accessories, contact us at:
Philips Parts & Accessories Marketing Department
401 East Old Andrew Johnson Highway
P.O. Box 555
Jefferson City, TN 37760
1-800-851-8885.
Monaural Audio and Video Cables (6 feet)
VHS Cassette Rewinder
#M61117
Color-coded for easy connection
#M61103
Three Cassette Storage Cases (plastic)
Fits VHS and Beta cassettes
#M61104
Six High-grade, VHS, T-120 Cassettes
#MHG1206
This owner’s manual is made of recycled paper.
As an ENERGY STAR® Partner, Philips Consumer Electronics
Company has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.
ENERGY STAR® is a U.S. registered mark.
IB8204E001
Printed In Malaysia
0EMN01666 / T5114UQ * * * * *
Download from Www.Somanuals.com. All Manuals Search And Download.
|