Magnavox Flat Panel Television 42MF231D 331D User Manual

User Manual

S M A R T. V E R Y S M A R T.

42MF231D/331D

Plasma TV

Thank you for choosing Magnavox.

Need help fast?

Read your user Manual and/or

Quick-Use Guide first for quick tips

that make using your Magnavox

product more enjoyable.

If you have read your instructions and

still need assistance,

you may access our online help at:

www.usasupport.magnavox.com

or call

1-800-705-2000

while with your product

(and Model / Serial number)

Model No:

Serial No:

^{Download from Www.Soman}3^u1^a3^ls8^.co1^m55^{. A}2^l4^{l M}39^an2^{uals Search And Download.}

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

exhibits a marked change in performance;

2. Keep these instructions.

3. Heed all warnings.

E. The appliance has been dropped, or the enclosure dam-

aged.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

17. Tilt/Stability - All televisions must comply with

recommended international global safety standards for tilt

and stability properties of its cabinet design.

• Do not compromise these design standards by applying

excessive pull force to the front, or top, of the cabinet

which could ultimately overturn the product.

• Also, do not endanger yourself, or children, by placing

electronic equipment/toys on the top of the cabinet. Such

items could unsuspectingly fall from the top of the set and

cause product damage and/or personal injury.

18. Wall or Ceiling Mounting - The appliance should be

mounted to a wall or ceiling only as recommended by the

manufacturer.

7. Do not block any of the ventilation openings.

Install in accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliﬁers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two

blades and third grounding prong. The wide blade or third

prong are provided for your safety. When the provided

plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

19. Power Lines - An outdoor antenna should be located away

from power lines.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories speciﬁed by the

manufacturer.

20. Outdoor Antenna Grounding - If an outside antenna is

connected to the receiver, be sure the antenna system is

grounded so as to provide some protection against voltage

surges and built up static charges.

Section 810 of the National Electric Code, ANSI/NFPA

No. 70-1984, provides information with respect to proper

grounding of the mast and supporting structure, ground-

ing of the lead-in wire to an antenna discharge unit, size of

grounding connectors, location of antenna-discharge unit,

connection to grounding electrodes, and requirements for

the grounding electrode. See Figure below.

Use only with a cart, stand, tripod, bracket, or table

speciﬁed by the manufacturer, or sold with the ap-

paratus. When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when un-

used for long periods of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into apparatus, the appara-

tus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

21. Object and Liquid Entry - Care should be taken so that

objects do not fall and liquids are not spilled into the enclo-

sure through openings.

22. Battery Usage CAUTION - To prevent battery leakage

that may result in bodily injury, property damage, or

damage to the unit:

15. This product may contain lead and mercury. Disposal of

these materials may be regulated due to environmental

considerations. For disposal or recycling information, please

contact your local authorities or the Electronic Industries

Alliance: www.eiae.org

• Install all batteries correctly, with + and - aligned as

marked on the unit.

• Do not mix batteries (old and new or carbon and

alkaline, etc.).

• Remove batteries when the unit is not used for a long

time.

16. Damage Requiring Service - The appliance should be

serviced by qualiﬁed service personnel when:

A. The power supply cord or the plug has been damaged;

B. Objects have fallen, or liquid has been spilled into the

appliance;

C. The appliance has been exposed to rain

D. The appliance does not appear to operate normally or

Note to the CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article

820-40 of the NEC that provides guidelines for proper grounding and, in particular, speciﬁes that the cable ground shall be

connected to the grounding system of the building, as close to the point of cable entry as practical.

Example ofAntenna Grounding as

GROUND CLAMP

ANTENNA LEAD IN WIRE

per NEC - National Electric Code

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

ELECTRIC SERVICE EQUIPMENT

Download from Www.Somanuals.com. All Manuals Search And Download.

Precaution

ADDITIONAL SAFETY PRECAUTIONS

• ENSURE that Plasma TV stand is tightened properly to the set (See Quick Guide) on the right way of tightening of

the screw of the stand to the set. Improper tightening of screw may render the set unsafe.

• If PlasmaTV is installed on the wall, installation should be carried out by qualified servicemen. Improper or incorrect

installation may render the set unsafe.

• Disconnect main plug when :

— cleaning the TV screen, never use abrasive cleaning agents.

— there is a lightning storm.

— the set is left unattended for a prolonged period of time.

• Do not shift or move the Plasma TV around when it is powered on.

• Do not touch, push or rub the surface of the Plasma screen with any sharp or hard objects.

• When the surface of the Plasma screen becomes dusty, wipe it gently with an absorbent cotton cloth or

other soft material like chamois. DO NOT USE acetone, toluene or alcohol to clean the surface of the screen.

These chemicals will cause damage to the surface.

• Wipe off water or saliva as soon as possible. These liquids can cause deformation and color fading of the

Plasma screen when left exposed for some time.

• Be careful of condensation when temperature changes occur. Condensation can cause damage to the Plasma

screen and electrically parts. After condensation fades, spots or blemishes will be present on the Plasma screen.

POSITIONING THE PLASMA TELEVISION

• Place the Plasma TV on a solid, sturdy base or stand. Be sure the stand is strong enough to handle the weight of

the Plasma TV.

• Try to leave at least 6” of space around each side of the Plasma TV cabinet to allow for proper ventilation.

• Do not place the Plasma TV near a radiator or other sources of heat.

• Do not place the Plasma TV where it can be exposed to rain or excessive moisture.

RECYCLING PROCEDURE/END OF LIFE DISPOSAL

• To minimize harm to the environment, the batteries supplied with the Plasma TV do not contain mercury or

nickel cadmium. If possible, when disposing of batteries, use recycling means available in your area.

• The Plasma TV uses materials that can be recycled. To minimize the amount of waste in the environment, check

your area for companies that will recover used televisions for dismantling and collection of reusable

materials, or contact your dealer for TV recycling tips.

• Please dispose of the carton and packing material through the proper waste disposal management in your

area.

Download from Www.Somanuals.com. All Manuals Search And Download.

Content

Welcome/registration of your TV . . . . . . . . . . . . . . . .2

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . 3

Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Use of the remote control . . . . . . . . . . . . . . . . . . . . . . .9

Buttons on the top of the TV . . . . . . . . . . . . . . . . . . . .11

To use the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Help

If this instruction manual does not give an

answer or if ‘Trouble shooting tips’ does

not solve your TV problem, you can call

your Local Magnavox Customer or

Service Center.

Please, have the Model and Serial number

which you can find at the back of your

television set or on the packaging, ready,

before calling the Magnavox helpline

1-800-705-2000

How to navigate through the Settings menu

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Model

: 42MF231D/42MF331D

Select the menu language

Store TV channels

Weak channel installation

Serial No:.............................................

Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Preferences

Source

Clock

Care of the screen See Tips, p. 34

TV menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Magnavox is paying a lot of attention to pro-

ducing environmentally-friendly in product.

Your new TV contains materials which can

be recycled and reused. At the end of its life

specialized companies can dismantle the dis-

carded TV to recycle the reusable materials

and to minimize the amount of materials to

be disposed of. Please ensure you dispose of

your old TV according to local regulations.

Picture menu

Sound menu

Features menu

Channels menu

Connect accessory devices . . . . . . . . . . . . . . . . . . . . . 28

Recorder (vcr-dvd+rw)

Recorder and other A/V devices

Recorder and cable box with RF output

Satellite Receiver / cable box with AV outputs

Recorder and satellite Receiver / cable box with AV outputs

Digital Surround receiver

DVD Player or other accessory digital source devices

HDMI (High Definition Multimedia interface) connectors

Side connections

Record with your recorder. . . . . . . . . . . . . . . . . . . . . . 33

Record a TV program 33

To select connected devices. . . . . . . . . . . . . . . . . . . . .33

Trouble shooting tips . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Care and cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Regulatory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Annex 1- Magnavox TV software upgrade with portable memory . .36

Federal Communications Commission(FCC) Notice

. . . . . . . . . . . . . . . . . . . . . 38

. . . . . . . . . . . . . . . . . . . . . 39

(U.S. Only)

. . . . . . . . . . . .

Limited warranty. . . . . . . .

Download from Www.Somanuals.com. All Manuals Search And Download.

Preparation

Do not insert the power plug in a wall socket before

all connections are made.

Place the TV on a solid surface.

For ventilation, leave at least 4” to 6” free all around the TV.

Do not place the TV on a carpet. To prevent any unsafe situa-

tions, no naked ﬂame sources, such as lighted candles, should be

placed in the vicinity. Avoid heat, direct sunlight and exposure to

rain or water. The equipment shall not be exposed to dripping

or splashing.

Mounting the TV on the wall

This TV set complies with the VESA standard for wall mounting.

Caution: Installing the TV requires special skill that should only

be performed by qualiﬁed personnel. You should not attempt to

do the work yourself. Magnavox bears no

responsibility for improper mounting or mounting that results in

accident or injury.

Make sure that the wall mount is being ﬁxed securely enough so

that it meets safety standards.

ANTENNA

Basic connections to the TV

Your integrated digital TV automatically decodes and

displays the four basic DTV picture resolution standards.

- SDTV (Standard Deﬁnition TV) are broadcast as 480i

(480-line interlaced) or 480p (480-line progressive scan)

video.

CABLE

- HDTV (High-Deﬁnition TV) are broadcast either in the

1080i or 720p formats, always with a widescreen picture.

Note: Progressive scan video (p) is more like that you see in a

movie theater. Images are much more distinct, free of ﬂicker

and motion is smoother.

CABLE OR ANTENNA

Your TV has an integrated HDTV tuner, which receives and

decodes terrestrial ATSC and unscrambled cable (QAM)

signals and displays them. There are two ways to obtain

HDTV content:

- through a cable provider

- through an antenna.

Note: Use the illustrations on the left for cable or Antenna

connections.

Download from Www.Somanuals.com. All Manuals Search And Download.

- Cable TV

Connect the cable TV signal to the CABLE/

ANTENNA 75

jack at the bottom of the TV.

See page 14 for details on using Autoprogram to store

channels in the TV’s memory.

Note: This connection will supply stereo sound to the TV if

the station you are viewing broadcasts stereo sound.

- Cable box with RF IN/OUT

ANTENNA

• Connect the incoming cable TV signal to the cable IN

jack on the back of the cable box.

• Connect a coaxial cable (not supplied) from the TO TV

jack on the back of the cable box to the CABLE/

CABLE

HDMI 1

HDMI 2

CABLE OR ANTENNA

ANTENNA 75

jack

at the bottom of the TV.

Note: Your cable box may have a different label for the TO

TV jack. Commonly used labels include OUTPUT or OUT.

TO TV

OUTPUT

OUT

• Set the OUTPUT CH switch

on the cable box to CH

3 or 4 (whichever is correct for your cable box), Next,

tune the TV to the corresponding channel. Once

tuned,change channels using the cable box, not the TV.

Note: This connection will not supply stereo sound to the TV. The

reason is that the RF output on a cable box - labeled TO TV, OUT

or OUTPUT for example - will not send a stereo signal to the tuner

(VHF/UHF) input on a TV.

Cable box

ANTENNA

- Cable box with A/V outputs

• Connect the incoming cable TV signal to a signal

splitter (not supplied). The signal splitter enables you to avoid

having to use the TO TV jack on the back of the cable box.

This jack will not supply stereo sound to the TV.

S-VIDEO

HDMI

VIDEO

CABLE

Note: Your cable box may have a different label for the TO

TV jack. Commonly used labels include OUTPUT or OUT.

CABLE OR ANTENNA

AV2:

L+R+VIDEO

• Connect a coaxial cable (not supplied) to a connector on

SPLITTER

the signal splitter and to the CABLE/ANTENNA 75

jack

on the TV.

OUT

• Connect another coaxial cable (not supplied) to a

connector on the signal splitter and to the cable IN jack

on the back of the cable box.

Cable box

• Connect A/V cables (not supplied) to the VIDEO and

AUDIO L and R outputs on the back of the cable box

and to the AV2 video (labeled VIDEO) and AUDIO

Note: Video In signal input can be handled by

AV1, AV3 as well.

(labeled L and R) jacks

on the back of the TV.

• To view programs from your cable box, ﬁrst press the

AV button on the remote control.

• Press the cursor down or up buttons until the AV2 signal

source is selected.

Watching cable TV programs that don’t

require the use of a cable box.

• Press the OK button to conﬁrm your selection. The AV2

input source becomes current for the viewing of cable TV

programs through your cable box.

Since you’ve connected the cable TV signal

directly to the TV’s tuner, you can also watch

unscrambled programs by simply tuning to

the desired channel; however, you must ﬁrst use

Auto program to store available channels in the

TV’s memory. (p. 13)

Note: If your cable box audio/video outputs do not supply

video and stereo audio to the TV, you will need to make the

connection shown above in “Cable box with RF IN/OUT.

Note: This connection will supply stereo sound to the

TV if the station you are viewing broadcasts stereo

sound.

Download from Www.Somanuals.com. All Manuals Search And Download.

ANTENNA

- Cable box with S-Video, component video (YPbPr)

or HDMI connectors

See Connect Accessory Devices, p. 27.

CABLE

- Antenna

Through an antenna, you can watch any HDTV programs

that are broadcast in your area without paying fees.

If you’re not sure what HDTV programming is available in

your area, contact your local content provider or your

local electronics retailer.

CABLE OR ANTENNA

Broadcasters are currently transitioning from analog to digital

TV. This means that a given broadcaster will have two

channels on the air, one analog and one digital.

Connect the incoming antenna signal to the CABLE/

ANTENNA 75

jack at the bottom of the TV.

See page 14 for details on using Autoprogram to store

channels in the TV’s memory.

Note:This connection will supply stereo sound to the TV if it is

being broadcast by the station you are watching.

- Direct Broadcast Satellite (DBS)

Satellite systems offer many of the same premium channels

available on cable systems, often at a lower price. To view

these channels, you’ll need to install a small dish antenna

outside your home.

The two main DBS systems, DirecTV and DishNetwork,

require separate, proprietary set-top receiver boxes to

decode their signals and send them to your digital TV set.

These boxes may include a digital TV tuner for off-air DTV

broadcasts.

Satellite broadcasters also provide major local

channels, depending on the market in which you live.

DBS also provides service in areas not covered by cable

because the are in rural areas or other areas not passed by a

cable line.

DBS also allows you to watch pay-per-view events.

To connect accessory devices, see p. 27.

Refer to the bottom of the set for the correct operation

voltage.

Insert the power cord into the wall socket.

Consult your local dealer if your main power supply voltage is

different than that indicated for the TV. Never place the TV on

top of the (AC) cord. Placing the TV at top the AC cord could

cause a ﬁre or electric shock.

Remote control:

Insert the two supplied AAA batteries.

The batteries supplied do not contain the heavy metals mercury

and cadmium. Please determine and comply with local

regulations when disposing of depleted batteries.

Turn the TV on:

Press the power switch at the front side of the TV. An

indicator on the front of the TV lights up.

Press the POWER buttons or the CH

remote control.

button on the

Download from Www.Somanuals.com. All Manuals Search And Download.

Use of the remote control

Note: Pressing most buttons once will activate the assigned function. Pressing a second time will de-activate it.

When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list.

The list will be removed automatically after six seconds or press OK to remove immediately.

VOL

Volume

POWER

Press or to adjust the volume.

Press to turn on/off the TV from or to standby

mode.

Note: The TV is never powered off

completely unless it is physically unplugged.

- to activate a setting

- to display the list of channels stored

(according to the selecion made in the

Installation mode (Antenna or Cable),

p.13.

A/CH

Press to alternate between the

currently viewed channel and the

previously viewed channel.

Color buttons

When functions attached to the color

buttons, the color buttons are shown on

screen.

Press this button repeatedly to select AV1,

AV2, AV3, HDMI1, SIDE or TV when in TV

mode, according to where you connected the

accessory devices (p. 27).

MUTE

Interrupt the sound or restore it.

VIEW

Type the dot for digital channels.

To display a list of all channels marked as

favorite (incl. subchannels).

Channel selection

-To browse through the TV channels or

sources stored in the preferred channel list

(see p. 26).

-To select between Antenna or Cable TV

channels, ﬁrst make your selection in the

Settings menu, see, p. 13.

Smart Sound button

Press repeatedly to select among the four

settings; Personal, Speech, Music, Movies,

or Multimedia.

Smart Picture button

Note: You don’t have to start the installation

again once you have searched for and stored

the available TV channels.

Press repeatedly to select among

Personal, Rich, Natural, Soft,

Multimedia or Eco picture settings.

INFO button

Settings menu on/off, see p. 12.

Display information: Press to display

(when available) information about the

selected TV channel and program or

accessory device.

To add or remove a channel in the favorite list

of TV channels.

Download from Www.Somanuals.com. All Manuals Search And Download.

FORMAT

Press this button to display a list of available display formats.

Available display formats are determined by the type of signal you

are receiving.

To choose the display format you prefer, press the FORMAT

button repeatedly: Formats:

Automatic, Super Zoom, 4:3, Movie expand

14:9, Movie expand 16:9, 16:9 subtitle and widescreen.

Automatic

Super zoom

4:3

Movie expand 14:9

Movie expand 16:9

16:9 subtitle

Widescreen

Automatic makes the picture ﬁll the screen as much as

possible. It is recommended to press the cursor up/down or

left/right key to adjust the picture position on the screen.

Super zoom removes the black bars on the sides of 4:3

programs with minimal distortion. When in the Movie expand 14:9,

Movie expand 16:9 or Super zoom picture format, you can make

subtitles visible with the cursor up/down.

Note: Not all screen formats are available when displaying HD sources.

Download from Www.Somanuals.com. All Manuals Search And Download.

Buttons on the top of theTV

Should your remote be lost or broken you can still change some

of the basic settings with the buttons on the top of your TV.

Press the power switch to switch the TV on.

Press:

•the + VOL -button to adjust to volume;

•the + CH -buttons to select the TV channels or

sources.

The MENU button can be used to display the Settings menu

without the remote control.

Use:

•the + VOL - buttons and the + CH -

buttons to select menu items in the directions as shown;

•the + VOL button to confirm your selection.

Note:

When a menu is activated through the MENU button on the top of

the TV, a menu can be closed only by navigating to Exit and pressing

the MENU button.

Download from Www.Somanuals.com. All Manuals Search And Download.

To use the menus

Introduction

When you use a menu or take an action, convenient instructions, help texts and messages will be displayed on your TV.

Please, follow the displayed instructions and read the help text on the speciﬁc item highlighted.

The color buttons govern different actions you can take on an activated device. Press the corresponding color button on

the remote control to perform the required action on a selected device.

How to navigate through the Settings menus

Settings

Picture

The Settings menu allows you to access and change

settings and preferences settings.

Sound

Setup

Installation

Exit

Features

Channels

• Press the MENU button on the remote control to

display the Settings menu.

- Use cursor up/down to highlight and select a menu item

on the left panel.

The right panel shows the content of the menu you have

highlighted in the left panel.

Info

Note: Sometimes not all the menu items are visible on the

screen. Use cursor down to scroll down to additional items.

- Use the cursor right to enter the right panel.

The content of the right panel is moved to the left panel

and the right panel shows the content of the newly

highlighted item in the left panel.

Note: In some cases, you will want to watch the picture on

your screen while adjusting settings. This means that when the

Settings

Picture

Smart Picture

Contrast

Sound

Features

Channels

Brightness

Color

highlight is on the right side panel, the other menu items are

hidden. When the cursor left is pressed again, the hidden

menu items re-appear and the highlight moves to the left

panel.

Sharpness

Color temperature

Tint

Picture format

Info

• Press the cursor left to go one menu level up again.

- Press the OK button on the highlighted item to activate

and to dismiss the menu.

- Press the MENU button again to exit the Settings menu.

Note: The menu is also dismissed by pressing one of the color

buttons (if present) referring to certain actions which may be

executed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Select the menu language

Press the MENU button on the remote control.

Use the cursor down to select Installation in the Settings menu.

Use the cursor right to enter the Installation menu.

Settings

Installation

Language

Autoprogram

Setup

4 Select Language and enter the list of available languages with the

Installation

Exit

Weak channel installation

Software upgrade

cursor right.

Select your preferred language with the cursor up/down and press

the OK button to conﬁrm you selection.

Proceed with the Installation menu.

Info

Store TV channels

Select Autoprogram in the Installation menu.

Use the cursor right to enter the Autoprogram menu.

Press the OK button.

Settings

Installation

Language

Autoprogram

Start now

4 Select Cable or Antenna in the Installation mode.

When Antenna is selected, the TV will detect antenna

signals and will search for antenna TV (NTSC and ATSC) channels

available in your local area.

Autoprogram

Weak channel installation

Software upgrade

When Cable is selected, the TV will detect cable company

supplied signal sand will search for cable TV (NTSC, ATSC, QAM

modulated) channels available in your area.

Make sure that registration with your cable TV provider and

connection of equipment are completed.

Info

Press the green button “Next” on the remote control.

Note: All channels must be unlocked in order to autoprogram. If

requested, enter your PIN code to unlock all channels. See Menu

preferences in the Settings, TV menu, p. 17.

Television Installation

Installation mode

Antenna

Please select your

installation mode

6 Press the green button “Start” to start autoprogramming. The

menu screen disappears and the progress of autoprogramming is

displayed. The progress bar indicates the number of analog and

digital TV channels found.

Cable

When Autoprogramming is complete, a message appears

conﬁrming the completion and the TV switches to the ﬁrst

installed TV channel.

Notes:

• When you have locked TV channels before initiating Autoprogram, a message appears asking to enter your PIN code in

order to complete Autoprogramming.

• ATSC channel information is updated automatically when the TV is in standby after 3 minutes and every 3 hours thereafter.

• When channel update is interrupted, the new updated channel information is retained along with the old un-updated

channel information.

• Background Autoprogramming occurs only when the TV is turned on.

• Channel information about an ATSC channel is updated only for the ATSC channel currently tuned.

• If an NTSC channel is tuned, then in Background Autoprogramming the TV shall scan all the possible ATSC frequencies

and update information.

• Weak channel installation allows you to manually tune weak ATSC channels in order to adjust the antenna and thus

optimize signal quality for that channel. (See Installation menu, Weak channel installation, p. 14.)

• Once you have searched for the available Antenna as well as the Cable TV channels, they are stored in the memory.

• If Antenna/cable signal is interrupted more than ten minutes, TV will go into off mode. You are requested to press Power button

or CH

button to turn on the TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

Channel tuning

Available channels:

- Cable (analog NTSC or digital QAM)

- Terrestrial (analog NTSC or digital ATSC)

If a tuned channel is not yet in the

master channel map, the TV will attempt to tune to the

channel and it will be added to the map.

If the channel is not acquired, a message will appear reporting

that the channel is not available. When you tune an audio-only

digital subchannel, a display appears with the message Audio only.

Note: Subchannel selections

The new standards employed with digital broadcasting make it possible

to receive multiple program channels under a single major channel

number which can be selected by pressing the digit remote control

direct-access channel number entry.

Note: Digital Channel selection delay

Due to the tuning complexity of subchannel

digital programming, the time to select and view

a digital channel may take slightly longer than

what the viewer is normally accustomed to (as

compared to analog channel programs).

Digital channel broadcasts contain program and

system data information that must be processed

before the channel selection can be displayed.

Important:

After the installation of the TV channels is completed, always

make a selection in the Installation menu between Antenna or

Cable whether you want to watch Antenna TV channels or Cable

TV channels.

If you make use of a signal splitter do not forget to put the switch

in the corresponding position.

Weak channel installation

Antenna reception for broadcast channels may vary. If you are

having difﬁculties acquiring weaker signals, we suggest

you use: Weak Signal Installation feature.

Here’s how:

In the antenna mode, select a channel from the displayed list of

TV channels. Select the “Start” by red button on the remote

control; TV set will detect the signal.

The signal strength is continuously displayed and updated as the

antenna rotates.

When strength is enough to identify, user can store the channel

in the channel list by green button on the remote control.

Settings

Installation

Language

Software upgrade

Autoprogram

Setup

Installation

Exit

Weak channel installation

Software upgrade

This menu allows you to upgrade your TV software using a USB

device.

USB upgrade

It is possible to initiate an upgrade procedure from a USB portable

memory (not supplied). The memory device must be ﬁlled with the

appropriate upgrade image (and structure) which can be found on

the www.usasupport.magnavox.com website. How to upload a new

software version on your portable memory device (not supplied),

see Annex 1, p. 35.

Info

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup menu

This menu is used to control the settings of special TV

functions, features and accessory devices.

The Preferences menu allows you to change settings that will

typically be accessed only occasionally.

The Source menu allows you to select a source.

The Clock menu allows you to use your TV as a clock. This setup

is necessary for the correct working of the Lock after feature.

Settings

Setting

Setup

Preferences

Source

Clock

Setup

Installation

Exit

Preferences

Press the MENU button.

Select Setup with the cursor down key and press the cursor right

Info

key to select the Preferences menu.

Press the cursor right key again to select Sound preferences.

Press the cursor right key once more to enter the Sound

Settings

Setup

Preferences

Sound preferences

preferences menu.

Source

Clock

Features preferences

Menu preferences

Reset AV settings

Auto surround

Sometimes the broadcaster transmits special signals for

Surround sound encoded programs. The TV automatically switches

to the best surround sound mode when Auto

surround is switched On.

Info

Features preferences

Settings

Preferences

Sound preferences

Auto surround

Caption service

This allows you to select the Closed Captions service levels of

analog broadcasting to be displayed.

Features preferences

Menu preferences

Reset AV settings

Closed Captioning allows you to read the voice content of

television programs on the TV screen. Designed to help the

hearing impaired, this feature uses on-screen ‘text boxes’ to show

dialogue and conversations while the TV program is in progress.

Captions will appear on the screen during captioned broadcasts.

Select Captions service.

Info

2 Press the cursor right key.

Select the desired Caption service:

• CC 1,2,3 or 4

Note: The captions do not always use correct

spelling and grammar. Not all TV programs and

product commercials are made for broadcast with

Closed Caption informations included.

Refer to your area’s TV program listings for the TV

channels and times of Closed Caption

programming. Captioned programs are usually

noted in the TV listings with service marks such as

‘CC’.

Dialogue (and descriptions) for the action on the captioned TV

program shows on screen.

Usually CC1 is the most used. CC 2 may be used for alternate

languages if they are being transmitted.

• T 1,2,3 or 4

Often used for channel guide, schedules, bulletin board

information for Closed Captions programs, news, weather

informations or stock market reports.

Not all Caption services are necessarily being used by a TV

channel during the transmission of a Closed Caption program.

See Closed Caption in the TV, Features menu, see p. 23, to turn

the Caption service On or Off.

Note: This television provides display of television closed captioning

conforming with the EIA-608 standard and in accordance with

Sections 15.119 of the FCC rules.

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital caption service

This allows you to conﬁgure the way you choose to view digital

captioning.

Select one of the digital service channels made available by the

caption provider.

There are six standard services. Service 1 is designated as the

Primary Caption Service. This service contains the verbatim, or

near-verbatim captions for the primary language being spoken in

the accompanying program audio.

Settings

Preferences

Sound preferences

Features preferences

Menu preferences

Reset AV settings

Features preferences

Caption service

Digital caption service

Digital caption options

Service 2 is designated as the Secondary Language Service.

This service contains captions in a secondary language, which

is a translation of the captions in the primary Caption

Service. The other service subchannels are not pre-assigned.

It is up to the discretion of the individual caption provider to

utilize the remaining service channels.

Info

Digital caption options

This allows you to modify how digital captions are displayed on your

TV. Select from the following options to change the visual

characteristics of your TV’s digital captioning.

• Reset to default

Select this option to reset the digital caption options to the

captions provider default settings.

Press the OK button to conﬁrm.

• Size

Select this option to choose a caption display size according

to your own preference. Select Default (Automatic),

Small, Standard or Large and press the OK button to

conﬁrm.

• Style

Select this option to choose a caption display font style

according to your own preference. Select Default, Mono

spaced serif, Serif, Monospaced sans serif, Sans serif,

Casual, Cursive or Small caps.

• Text

Select this option to choose caption display text box, text

color and/or the opacity according to your own preference.

Select a color and an opacity option.

• Background

Select this option to choose caption display character back

ground color or one of the background opacity options

according to your own preference. Select a color and one of

the opacity options.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu preferences

OSD

Settings

Preferences

Sound preferences

Features preferences

Menu preferences

Reset AV settings

Menu preferences

OSD

Select OSD.

Show emergency alerts

2 Press the cursor right key to select Normal or Minimum.

Normal activates a continuous display of the channel number

for a maximum of 10 minutes and extended display of TV

channel and program information on screen. For example,

information on the main or auxiliary program, input signal quality

of connected accessory devices, the display format, sound mode,

availability of Closed Caption service, the audio language, the

rating, sleep timer setup is displayed.

Change PIN

Info

Minimum activates the display of reduced channel information.

Note: When Closed Captions is switched on, continuous display of the

channel number and clock is not possible.

Note: Emergency Alert Signalling is not possible:

- when content browsing;

- with analogue video sources.

Show emergency alerts (EAS)

This allows you to select the alert priority level of the information

disseminated by the cable operator. The standard SCTE18 deﬁnes

an Emergency Alert signalling method for use by cable TV

systems to signal emergencies to digital devices such as digital

set-top boxes, digital TVs and digital VCRs.

The Emergency alert signalling scheme deﬁned in the standard

allows a cable operator to disseminate emergency alert

information related to state and local-level emergencies and

warnings in a cost-effective and efﬁcient way, while minimizing

disruption of programming.

An Emergency alert message will have one of the following

priorities: Low, Medium, High or Maximum.

Notes:

- You always have the possibility to remove the

message from the screen.

- The message display will overlap whatever

menu element or other message is on the

screen.

The Emergency alert message with priority High or Maximum

will always be presented. Low or Medium will be present or

ignored depending on the setting you select.

Important: When the TV clock is undeﬁned (See Setup menu, Clock,

p. 19), the Emergency Alerts will be ignored.

The Emergency Alert message display will contain following

information:

- The Emergency Alert text

- The start time + date

- The end time + date.

Select Show Emergency Alerts in the Menu preferences menu.

Press the cursor right key and select one of the Emergency alerts

options:

- Always: You always want available Emergency alert messages to

be displayed;

- Skip low priority: You want low level messages to be ignored;

- Skip low/medium priority: You only want the high priority

message to be displayed.

Important: you have forgotten your PIN!

Select Change PIN in the Menu preferences

menu and press the cursor right key.

Press the cursor right key to enter the

Set/Change PIN

Select Set or Change PIN with the cursor down.

If no PIN-code exists, the menu item is set to Set PIN.

Follow the instructions on screen. If a PIN-code has previously

been entered, the menu item is set to Change PIN. Follow the

instructions on screen. All number combinations from 0000 to

9999 are valid numbers.

The Menu preferences menu reappears with a message

conﬁrming that the PIN has been created.

overriding PIN code 0-7-1-1.

3 Press the cursor again and enter a new

personal 4-digit PIN code. The previous

code is erased and your new PIN-code is

stored.

Download from Www.Somanuals.com. All Manuals Search And Download.

Reset AV settings

This function allows you to reset most of the picture and sound

settings to their default factory levels.

Settings

Preferences

Sound preferences

Features preferences

Menu preferences

Reset AV settings

Start now

Select Reset AV settings with the cursor down key.

Press the cursor right key.

Press the OK button to erase settings and reset them to their

default values.

Info

Source

Settings

Setup

Preferences

Source

AV1

This menu allows you to identify the accessory devices you have

connected to the external inputs/outputs.

Source

Clock

AV2

AV3

HDMI

Select Source in the Setup menu.

Press the cursor right to enter the list of types of devices

Side

Analog Audio In

connected to the selected input.

Select the accessory device with the cursor up/down.

Info

When you select AV1, AV2, AV3, HDMI1, Side or Analog Audio

In, a list appears allowing you to identify which type of accessory

device is attached to this input. The TV detects the presence of

the connected device and the signal is routed appropriately.

Analog Audio In

If your accessory device has a DVI output connector, only the

video signal is transmitted in digital format. To input an audio

signal, please connect the analog audio L and R outputs to the TV’s

L and R AV1 audio input plugs. To activate the audio function,

select HDMI from the Analog Audio In menu to activate.

Digital Audio Out

VIDEO

HDMI

In addition to accepting audio input through HDMI, the TV can

output Digital audio through the DIGITAL AUDIO OUT

(SPDIF OUT) connector to an external ampliﬁer or receiver.

If your ampliﬁer or receiver has a matching connector for Digital

Audio In, you can connect it with a single cable to the TV’s

DIGITAL AUDIO OUT (SPDIF OUT). See Connect

Accessory Devices, Digital Surround Receiver, p. 29.

HDMI

DVI

AV1:

Audio L/R

Download from Www.Somanuals.com. All Manuals Search And Download.

Clock

Settings

Setup

Clock

Preferences

Auto clock mode

This allows you to use your TV as a clock.

Note: Adjusting the clock is necessary for the correct operation of Lock after

(See TV settings, Channels, p. 24) features.

Source

Clock

Auto clock channel

Time

Day

Auto clock mode

Time zone

Daylight saving

Select Clock in the Setup menu.

Press the cursor right key to select the Auto clock mode.

Press the cursor right key to instruct the TV to get the time

Info

automatically or manually.

Auto clock channel (only available when Auto clock mode is set to Automatic)

Most TV channels do not transmit clock

information. A few cable channels do, but they

are at the end of the channel ring. Antenna

channels do not transmit clock information.

If clock information does not appear, you can

assume that either clock extraction is taking a

long time or that there is no clock.

With the cursor buttons, select the channel number where time

can be found by the TV. Typically time can be found on PBS as well

as some other channels.

Note: If Manual has been selected in the Auto clock mode, the Auto

clock channel menu item can not be selected.

Time - Day (only available when Auto clock mode is set to Manual)

With the cursor buttons, select and enter the correct time and

day. If Auto clock mode Manual has been selected, and no clock

search has been done, the system will keep the entered time and

day.

Time zone (only available when Auto clock mode is set to Automatic)

This function allows you to select your local time zone.

Broadcasted time information will correct the clock display for

your local time.

Select Time zone with the cursor down.

Press the cursor right to select your local time zone.

Daylight saving (only available when Auto clock mode is set to Automatic)

Daylight saving time is automatically set by specially

broadcasted signals. This menu item allows you to disable the

automatic setting of daylight saving time. This is useful if you live

in an area or state where daylight saving is not applied, but you

receive channels from other areas where daylight saving signals are

broadcasted.

Select Daylight saving with the cursor down.

Press the cursor right key to select Automatic for automatic

clock correction for daylight saving time, based on specially broad-

casted signals.

3 Select Off to disable automatic clock correction based on the spe-

cially broadcasted signals.

Download from Www.Somanuals.com. All Manuals Search And Download.

TV menu

Press the MENU button on the remote control to display the

Settings menu. The TV menu gives you an overview of the menus you

can select.

Settings

Picture

Note: Depending on the input signal, one or more menu items may not be

selectable.

Sound

Setup

Installation

Exit

Features

Channels

Picture menu

Note: Some menu items are not available in case of HD sources.

Info

Press the cursor right key to select Picture.

Press the cursor right key again to enter the Picture menu.

Select the menu items with the cursor up/down key.

Settings

Adjust the settings with the cursor left/right key or enter the list of

submenu items with the cursor right key. Select a

submenu item with the cursor up/down key.

Picture

Smart Picture

Contrast

Sound

Features

Channels

Brightness

Color

Smart picture

Sharpness

Color temperature

Tint

Select Smart picture to display a list of predeﬁned picture

settings, each corresponding with speciﬁc factory settings.

Personal refers to the personal preference settings of picture in

the picture menu.

Picture format

Info

Note: This Magnavox TV has been set at the factory to look best in

bright store environments, which typically use ﬂuorescent lighting. As your

home will likely not be as well lit as a store, we recommend that you

cycle through the various smart picture modes to ﬁnd the one that best

suits your own viewing conditions. Most consumers will ﬁnd that

Natural is the correct choice.

You can press the Smart picture button repeatedly to select

either Personal, Rich, Natural, Soft, Multimedia or Eco picture

settings.

Note: When you watch programs using VCR, it’s recommended to select

Soft Mode via smart picture.

Contrast

This will adjust the intensity of bright parts in the picture but keep

the dark parts unchanged.

Brightness

This will adjust the light output of the complete picture, which will

mainly affect the darker areas of the picture.

Color

This will adjust the saturation level of the colors to suit your

personal preference.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sharpness

This will adjust the sharpness of ﬁne details in the picture.

Color temperature

This will increase or decrease Warm (red) and Cool (blue) colors

to suit personal preferences.

Select Cool to give the white colors a blue tint, Normal to give

the white colors a neutral tint, Warm to give the white colors a

red tint.

Tint

Allows you to select the picture ‘s color mix or hue.

Picture format

This menu item performs the same as the FORMAT button on the

remote control. See Use of the remote control, p. 9.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound menu

Settings

Picture

Select Sound in the TV Settings menu.

Press the cursor right key to enter the sound menu.

Select the menu items with the cursor up/down key and adjust the

settings with the cursor left/right key.

Sound

Setup

Installation

Exit

Features

Channels

Remember, control settings are at normal mid-range levels when the

bar scale is entered.

Smart sound

Select Smart sound to display a list of predeﬁned sound settings,

Info

each corresponding with speciﬁc factory settings of Treble and Bass.

Press the cursor right key to enter the list.

2 Press the cursor up/down key to select a predeﬁned sound setting.

Personal refers to the personal preference sound settings in the sound

menu.

Settings

Sound

Smart Sound

Picture

Sound

Volume

Note: The moment you are in a predeﬁned Smart sound setting and you

modify a setting in the Sound menu, all values of the menu will overwrite the

previously made personal setting.

Features

Channels

Balance

Headphone volume

Sound mode

Alternate audio

Digital audio language

Volume

This will adjust the sound output level.

Balance

Mono/Stereo

Info

This will adjust the output of the right and left speakers to obtain the

best stereo reproduction for your listening position.

Headphone volume

This controls the level of sound through the headphones.

Sound mode

Settings

This select the modes for more spatial or surround sound

reproduction dependent on the broadcast signals or signals from

external inputs received.

Sound

........

Picture

Sound

Mono/Stereo

AVL

Features

Channels

Alternate audio (only selectable with analog broadcast signals)

Delta volume

This gives you the possibility to swap between the Main and

Second Audio Program (SAP) when it is available.

Digital Audio language (only selectable with digital broadcast signals)

Selects your language preference when digital broadcast

signal multilingual audio track programs are available.

Note: The default language for the digital channels is the installed menu

language.

Info

Mono/Stereo

Selects per TV channel, Mono or Stereo sound when analog stereo

broadcasts are available.

AVL (Automatic Volume Leveler) (only available with analog

broadcast and non-Digital signals)

Automatically reduces the volume differences between channels and

programs, providing a more constant overall level. This will also reduce

the dynamics of sound.

Delta volume

Corrects for any permanent volume differences between TV channels

or external sources.

Manufactured under license from Dolby

Laboratories. “Dolby” “Pro Logic” and

the double-D symbol are trademarks of

Dolby Laboratories.

Download from Www.Somanuals.com. All Manuals Search And Download.

Features menu

Settings

Features

Closed captions

Picture

Sound

Select Features in the TV Settings menu.

Press the cursor right key to enter the features menu.

Select the menu items with the cursor up/down key and

Sleeptimer

Features

Channels

adjust the settings with the cursor left/right key.

Closed captions

This displays the transmitted CC- or CS-text on the screen

according to your chosen CC or CS service in the Setup menu,

Features preferences menu, p. 15. This text can either be

permanently displayed (assuming that the service is

available in the broadcast) or only when mute is active.

Press the cursor right key after having selected Closed captions.

2 Select On, Off or On during mute.

Info

Sleeptimer

This sets a time period after which the TV automatically turns to

standby.

Select Sleeptimer.

Press the cursor right key.

Select a value with the cursor up/down key. The list will have values

from Off to 180 minutes. When Off is selected, the sleeptimer is

turned off.

You can always turn off your TV earlier or select another time set.

Download from Www.Somanuals.com. All Manuals Search And Download.

Channels menu

Settings

This menu can control special functions for the TV channels.

Select Channels in the TV settings menu with the cursor up/down key.

Press the cursor right to enter the channels menu.

Channels

Lock after

Picture

Sound

Channel lock

Features

Channels

TV ratings lock

Movie ratings lock

Prefered channels

Press the cursor up/down key to select a channels menu item.

Lock after

Region ratings lock

Clear region ratings

Note: Lock after is only selectable if time and date are known. See Setup,

Clock menu p. 19.

Info

This allows you to prevent the viewing of the channels after a selectable

time delay. Locked channels can still be tuned, but the picture is blanked

and the audio is muted.

Settings/TV

Press the cursor right and select Timer On or Off.

When set to On this allows you to set the clock.

When having selected Timer On, you will be asked to enter your PIN

(See Set/Change PIN, p. 17). Follow the instructions on screen.

2 Select Time and press the cursor right. This allows you to set the time

after which the lock is set.

Channels

Lock after

Timer

Lock after

Channel lock

Time

TV ratings lock

Movie ratings lock

Prefered channels

Region ratings lock

Clear region ratings

Select AM or PM to select the correct period of the day.

Enter the time with the digit or the cursor buttons and press OK to

conﬁrm.

Info

Channel lock

This allows you to completely lock a certain TV channel or external

source. Select the channels or subchannels you want to lock and press

OK to conﬁrm.

TV ratings lock

Settings/TV

Your TV is equipped with a V-chip. This allows you to control

access to individual programs based on their movie and TV ratings. All

settings apply to all AV inputs, except HDMI. The program content

advisory data are sent by the broadcaster or program provider.

Select TV ratings lock with the cursor down. A list appears, showing

the age-based TV ratings and a corresponding content-based ratings

list.

Channels

TV ratings lock

Please enter your PIN

Lock after

Channel lock

TV ratings lock

Movie ratings lock

Prefered channels

Region ratings lock

Clear region ratings

Press the cursor right to enter the list.

3 Select an age-based TV rating with the cursor up/down, and enter, if

present, the list with content-based ratings with the cursor right, and

select one content-based rating.

Info

Press OK to activate/de-activate the selected rating. You are asked to

enter your PIN-code (see Set/Change PIN, p. 18). If the code is correct,

the TV ratings lock menu reappears.

Select another content-based rating if you like and press OK again.

You need only enter your PIN-code once while the menu is active. You

can lock/unlock any number of ratings on the list without re-entering your

code.

Each ratings item has a box-graphic in front of it to indicate whether or not

programs carrying that rating are currently locked:

•

: all items in the contents-based list are locked as well;

: the item is unselected;

: some content-based ratings are selected/unselected.

Download from Www.Somanuals.com. All Manuals Search And Download.

When All has been selected, all items in the age-based and in

the contents-based lists are locked. If, while All is selected,

any other item, either an age-based or content-based item, is

unselected, then All is automatically unselected.

Age-based Rating Content-based Rating

All

none

None

TV-Y

TV-Y7

TV-G

TV-PG

none

None is the selection for items that either have no rating

information or have a rating of None. Both will be locked.

When an item on the age-based list is selected, all items below

that item of the same group are locked as well. When you

select a content-based rating, all identical content- based

ratings in the younger age-based categories are also selected.

(FV) Fantasy Violence

none

(D) Dialog

(L) Language

(S) Sex

(V) Violence

TV-14

(D) Dialog

(L) Language

(S) Sex

(V) Violence

TV-MA

(D) Dialog

(L) Language

(S) Sex

appropriate for children of all ages with themes and

elements suitable for children aged 2-6

TV-Y

programs designed for children age 7 and older

TV-Y7

programs include fantasy violence more intense than other

programs in the TV-Y7 category

TV-Y7-FV

programs suitable for all ages. These programs contain little

or no violence, no strong language and little or no sexual

dialogue or situations

TV-G

programs contain elements that some parents may ﬁnd

unsuitable for younger children and which may need

parental guidance. The program may contain moderate

violence, sexual dialogue and/or situations and some strong

language.

TV-PG

programs contain elements that may not be

suitable for children under 14 years of age. These programs

include one or more of the following: intense violence,

intense sexual situations, suggestive dialogue and strong

language.

TV-14

programs are designed to be viewed by adults and may be

unsuitable for children under the age of 17. These programs

may contain graphic violence, explicit sexual activity and/or

crude or indecent language.

TV-MA

Download from Www.Somanuals.com. All Manuals Search And Download.

Movie Ratings Lock

Settings/TV

Channels

Movie ratings lock

This function allows you to control access to individual movies based on

their MPAA ratings (Motion Picture Association of America).

Select Movie ratings lock with the cursor down. A list appears, showing

all valid MPAA content ratings.

Press the cursor right to enter the list. You are asked to enter your

code. (See Set/Change PIN, p. 17.) If the code is correct, the Movie

ratings lock menu reappears.

Please enter your PIN

Lock after

Channel lock

TV ratings lock

Movie ratings lock

Prefered channels

Region ratings lock

Clear region ratings

Select a movie rating with the cursor up/down.

Info

Press OK to activate/de-activate the selected rating.

Each rating item has a box-graphic in front of it to indicate

whether or not programs carrying that rating are currently locked:

•

: movies with this rating are locked;

: movies with this rating are unlocked.

When All has been selected, all items on the movie ratings list become

selected. (All movies are locked.) If, while All is selected, any other item is

unselected, then All is automatically unselected.

When NR has been selected, no other item is selected.

When any other item has been selected, all ratings below are selected as

well, thus all movies with those ratings will be locked.

not rated

movies with a mild content, suitable for all ages

movies for which parental guidance is recommended. They

may contain a few racy or violent scenes or maybe some bad

language

PG-13R movies for which parental guidance may be recommended if

under age 13

restricted. The movies usually contain offensive sex or bad

language and may be unsuitable for children under the age of

17. Parental guidance or permission needed.

NC-17

even with parental permission, forbidden under age 17.

More offensive sex, violence or bad language.

movies which generally focus on sex, violence and/or bad

language. Also known as pornography.

Settings/TV

Preferred channels

Channels

Prefered channels

Channel 1

A channel, when installed, is marked as preferred by default and

added to the channel list. This feature provides the ability to

remove a channel number from the channel list.

Select Preferred channels with the cursor down key.

Lock after

Channel lock

Channel 2

........

TV ratings lock

Movie ratings lock

Prefered channels

Region ratings lock

Press the cursor right key to enter a list with all stored

channel numbers.

Clear region ratings

Select the channel you want to remove with the cursor down key.

4 Press OK.

Info

5 Repeat to remove other channels.

Note:

Region ratings lock: This allows you to control access to individual programs base on their broadcasted regional rating.

Clear region ratings: This allows you to clear all the locks that you have set in the Region ratings lock table.

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings/TV

Region ratings lock

Channels

Region ratings lock

Please enter your PIN

Lock after

Channel lock

This allows you to control access to individual programs base on their

broadcasted regional rating.

TV ratings lock

Movie ratings lock

Prefered channels

Region ratings lock

Clear region ratings

Select Region ratings lock with the cursor down. A list appears,

showing the age-based Region ratings and a corresponding content-

based ratings list.

Press the cursor right to enter the list.

Info

Select an age-based Region rating with the cursor up/down, and enter,

if present, the list with content-based ratings with the cursor right, and

select one content-based rating.

Press OK to activate/de-activate the selected rating. You are asked to

enter your PIN-code (see Set/Change PIN, p. 17). If the code is correct,

the Region ratings lock menu reappears.

Select another content-based rating if you like and press OK again.

You need only enter your PIN-code once while the menu is active. You

can lock/unlock any number of ratings on the list without re-entering your

code.

Each ratings item has a box-graphic in front of it to indicate whether or not

programs carrying that rating are currently locked:

•

: all items in the contents-based list are locked as well;

: the item is unselected;

: some content-based ratings are selected/unselected.

Clear region ratings

Settings/TV

This allows you to clear all the locks that you have set in the Region

ratings lock table.

Channels

Clear region ratings

Please enter your PIN

Lock after

Channel lock

TV ratings lock

Select Clear region ratings with the cursor down.

Enter your PIN-code to clear all region ratings’ status.

Movie ratings lock

Prefered channels

Region ratings lock

Clear region ratings

Info

Download from Www.Somanuals.com. All Manuals Search And Download.

ConnectAccessory Devices

There is a wide range of audio and video devices that can be connected to your TV.The following

connection diagrams show you how to connect them to the TV.

AV1 YPbPr, VIDEO and L/R Audio,

AV2 YPbPr, VIDEO and L/R Audio,

AV3 VIDEO, S-VIDEO, L/R Audio and Digital Audio out (SPDIF OUT)

SIDE VIDEO, S-VIDEO and L/R Audio, Headphone

SPEAKERS

HDMI

Don’t insert any cable here. This area is for repair center use only.

VIDEO

S-VIDEO

HDMI

VIDEO

AC IN

A N T E N N A

Recorder (VCR-DVD+RW)

Note: Do not place your recorder too close to the TV screen. Some

recorders may be susceptible for signals from the display. Keep recorders

a minimum distance of 20” from the screen.

S-VIDEO

HDMI

VIDEO

C A B L E

Connect the RF Antenna or Cable TV cable (eventually through

an optional two-way signal splitter and/or Cable TV converter

A V 3:

+ R + V ID E O

box)

to the RF IN socket of your

OUT

recorder.

Connect another RF cable from the output OUT of your

recorder to the TV’s CABLE/ANTENNA 75

jack.

For better playback quality for stereo device only, also connect

the Video, Audio Left and Right (only for stereo devices) AV

cables

to the VIDEO, AUDIO L and R input jacks of AV3.

If your recorder has an S-VHS video jack:

For improved picture quality, connect an S-video cable to the

S-VIDEO input instead of connecting the recorder to the

VIDEO jack of AV3. S-Video does not provide audio, so audio

cables must still be connected to provide sound.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recorder and other A/V devices

Connect the RF antenna cable of the RF IN socket of your

other AV device.

ANTENNA

HDMI

S-VIDEO

VIDEO

Connect the RF output of the AV device to the RF input of the

CABLE

recorder

Connect another RF cable from the output OUT of your

AV1:

L + R + VIDEO

AV2:

L + R + VIDEO

recorder to the TV’s input CABLE/ANTENNA 75

To obtain better quality, also connect the Video or S-Video,

Audio left and Audio right cables of both devices to AV1

(VIDEO or AUDIO L and R,) and to AV2 (VIDEO or

jack.

HDMI

CABLE OR ANTENNA

OUT

AUDIO L and R)

RECORDER

Notes:

- When you use mono equipment, only the left loudspeaker

reproduces sound. Use a mono-to-stereo adapter (not supplied) for

sound reproduction through all internal loudspeakers.

- When using the S-VIDEO connector do not connect any device to

the AV3 VIDEO input.

ANTENNA

Recorder and cable box with RF output

Use an signal splitter (not supplied).

Connect one of the cable TV signal splitter (not supplied)

CABLE

S-VIDEO

HDMI

VIDEO

outputs

to the cable box’s IN jack.

Connect the other cable TV signal splitter output to the

CABLE/ANTENNA 75

Connect the cable box’s OUT jack

socket.

Connect the Video, Audio Left and Right (only for stereo

sound) recorder AV cables to the VIDEO, audio L and R

input AV2 jacks on the TV.

plug on the bottom of the TV.

SPLITTER

to the recorders RF IN

AV2:

L + R + VIDEO

CABLE OR ANTENNA

OUT

STB

RECORDER

Satellite Receiver / cable box with AV outputs

Connect the satellite antenna cable or the Cable TV cable

the satellite receiver’s or cable box’s IN jack.

S-VIDEO

ANTENNA

CABLE

HDMI

VIDEO

Connect the Video, Audio left and right AV cables

to the

VIDEO, L and R audio input jacks of AV3.

If your satellite receiver or cable box has an S-Video jack:

AV3:

L + R + VIDEO

For improved picture quality, connect an S-Video cable to the

S-VIDEO input instead of connecting the satellite receiver or

cable box to the VIDEO jack.

Connect the audio cables to the device’s AUDIO L and R jacks

and to the L and R audio AV3 jacks on the TV.

CABLE OR ANTENNA

STB

Download from Www.Somanuals.com. All Manuals Search And Download.

Recorder and Satellite Receiver / cable box with AV outputs

S-VIDEO

HDMI

VIDEO

Connect the RF Antenna or Cable TV cable as described above.

Connect the AV cables to the satellite receiver’s or cable box’s

AV OUT jacks and to the recorder’s AV IN jacks.

AV3:

L + R + VIDEO

Connect the recorder’s AV OUT jacks

to the TV’s AV3

jacks as described above.

Connect another RF cable from the output out of your

recorder to the TV’s input CABLE/ANTENNA jack.

OUT

CABLE OR ANTENNA

OUT

STB

RECORDER

Digital Surround receiver

S-VIDEO

Connect a Digital Multi Channel Surround receiver to the

DIGITAL AUDIO OUT (SPDIF OUT) connector at the bottom of

the TV.

DIGITAL

AUDIO

OUT

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Player or other accessory digital source devices

Devices with Component Video Output Connectors

(YPbPr)

YPbPr

S-VIDEO

VIDEO

This TV is capable of displaying 1080i, 720p and 480p DTV signals when

connected to a DTV tuner Set-Top Box. Select the output of the Set Top

Box to either 1080i, 720p or 480p. A DTV signal must be available in your

area.

AV1/AV2:

L + R

AV1/AV2:

YPbPr

Connect the three separate component video cables to a

Set-Top box, DVD-players, laser-disc players, video game players,

satellite receivers or other device with component video outputs

(YPbPr), and to the Y, Pb and Pr jacks of AV1 or AV2 on the TV.

DVD / STB

Devices with an S-Video connector

Connect an S-Video cable to the AV3 or Side AV input . Note:

When using the S-VIDEO connector do not connect any

device to the AV VIDEO input that you are using.

S-VIDEO

VIDEO

Connect the audio cables to the device’s AUDIO L and R jacks and to

the L and R audio AV3 or Side AV jacks on the TV

accordingly to where you connected the S-Video cable.

Notes:

AV3/Side:

L + R

- If necessary, you can center your screen picture position with

the cursor keys.

VIDEO

- Labels for the component video sockets may differ depending on

the DVD player or the device your are connecting. Although the

abbreviations may vary, the letters B and R stand for the blue

and red component signals, respectively, and Y indicates the

luminance signal. Refer to the DVD player’s or devices

instructions for deﬁnitions and connection details.

- This television is designed to accept high deﬁnition signal standards

720p and 1080i as speciﬁed by the Electronic Industries As

sociation standard EIA770.3. Digital devices from different manu

facturers may have differing output standards which may cause

difﬁculties for proper television display.

S-VIDEO

DVD / STB

- Due to possible digital image distortion when displaying signals

from connected digital equipment, we suggest you select the

Soft setting from the Smart picture menu. See Picture menu,

Smart picture, p. 20.

Set the Personal setting to off before storing this setting.

Warning: If scrolling images, mismatched colors, no color, no

picture, or combinations of these appear on your screen, check

to make sure input cables are connected to their corresponding

color-coded inputs or connections or move your digital device

farther away from your TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

HDMI (High Deﬁnition Multimedia Interface)

connectors

HDMI

HDMI is the leading new standard for Digital video and audio

interconnection. With the HDMI connector you can connect

HDMI Set-Top Box compatible DVD-R or DVD player with HDMI,

or DVI-equipped devices like a computer or other HDMI devices

to your TV. With this connection, you can display high-deﬁnition

pictures on this TV in digital format.

HDMI

Note: If the accessory device has DVI output only, use a DVI to

HDMI adapter cable to connect to the HDMI connector

Connect your HDMI device with HDMI connector.

Select the connected digital device in the Setup, Source menu, p. 18

The HDMI IN connectors allow

- the following TV and monitor display modes:

SDTV 640/720 x 480i

EDTV 640/720 x 480p

HDTV 1920 x1080i/1280 x 720p

Notes:

- If necessary, you can adjust the picture position to the center of the

screen with the cursor keys.

- Due to legal requirements, it is possible that audio may be muted when

playing certain copy protected PCM audio from a device connected to

the HDMI input.

- Your TV supports HDCP (High-bandwidth Digital Content Protection).

This is a system for protecting DVD content outputted via DVI from

being copied. It provides a secure digital link between a video source

(DVD,PC,etc.) and your TV. Content is encrypted at the source device to

prevent unauthorized copies from being made.

- Proper working is only guaranteed with HDMI compliant consumer

products.

VIDEO

HDMI

DVI

AV1:

Analog Audio out

- Digital devices from different manufacturers may differing output stan

dards, which may prevent your television from properly displaying

output.

- If your TV does not detect a signal from your HDMI device, turn off

and then turn on the HDMI device. For optimal viewing, we suggest you

adjust your DVD player to one of the following TV display standards:

1920x1080i,1280x720p,720x480i or 720x480p.

Side connections

Camera, Camcorder, Game

Connect your camera, camcorder or game as shown.

Connect to VIDEO and AUDIO L for mono equipment.

For stereo equipment also connect AUDIO R . S-VHS quality

with an S-VHS camcorder is obtained by connecting the S-VHS

cables with the S-VIDEO input

Do not connect cable and

cause picture distortion !

Headphone

and AUDIO inputs

at the same time. This may

Insert the plug into the headphone socket as shown.

2 Press the MUTE button on the remote control to switch off

the internal loudspeakers of the TV. The headphone impedance

must be between 8 and 4000 Ohm. The headphone socket has a

3.5 mm jack.

In the Sound menu select Headphone volume to adjust the head-

phone volume.

Download from Www.Somanuals.com. All Manuals Search And Download.

Record with your recorder

Record a TV program

You can record a TV program using your recorders tuner

without affecting your TV.

Select the channel number on your recorder.

Set your recorder to record.

See the handbook for your recorder.

Recorder

Note: Switching channel numbers on your TV does not disturb

recording !

VIDEO

To select connected devices

Press he AV button repeatedly or select Source in the

Settings menu (see p. 18) to select AV1, AV2, AV3, HDMI, Side

or TV, according to where you connected your devices.

Press the cursor up/down.

Press OK.

Regulatory Notices-Federal Communications Commission Notice

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installa-

tion. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the

separation between the equipment and the receiver.

Modiﬁcations-

The FCC requires the user to be notiﬁed that any changes or

modiﬁcations made to this device that are not expressly

approved by Magnavox Consumer Electronics may void the user’s

authority to operate the equipment.

Cables -

Connections to this device must be made with shielded cables

with metallic RFI/EMI connector hoods to maintain compliance

with FCC Rules and Regulations.

Canadian notice -

This Class B digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

Avis Canadien -

Cet appareil numérique de la classe B respecte toutes les

exigences du Règlement sur le matériel brouilleur du Canada.

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected. Consult the dealer or an

experienced radio or television technician for help.

Download from Www.Somanuals.com. All Manuals Search And Download.

Trouble ShootingTips

Symptoms

Items to Check and Actions to follow

“Ghost” or double

images

• This may be caused by obstruction to the antenna due to high rise buildings or hills.

Using a highly directional antenna may improve the picture.

No power

• Check that the TV’s AC power cord is plugged into the mains socket.

• Unplug the television, wait for 60 seconds. Then re-insert plug into the mains socket

and turn on the television again.

No picture

• Check antenna connections at the bottom of the TV to see if they are properly connected to the TV.

• Possible broadcast station trouble. Try another channel.

• Adjust the contrast and brightness settings. Try another auto picture setting.

• Check the Closed Captions control. Some TEXT modes could block the screen.

• Check if you selected the correct AV source.

No picture and power • Your TV has a protective mode in case there is too much heat build-up. Check the

switched on

clearance around the vents of the device to be certain there are no blocking walls or

cabinets which would limit the air flow.

Picture position

adjustment

When displaying a High Definition signal from the YPbPr inputs or HDMI input, if necessary, you can

adjust the picture position to the center of the screen with the cursor left/right or up/down buttons on

the remote control. This may be needed due to slight differences in output signals from different brands

and types of HD sources boxes.

Notes: Most High Definition receiver boxes also have picture-positioning controls in their menu

systems. If the TV cursor controls run out of range before the picture is correctly positoned, the

receiver box controls will need to be adjusted.

No photo, music or

video play or in poor

quality only

• Check if the source complies with a supported code.

No sound

• Increase the VOLUME.

• Check that the TV is not muted, press the MUTE button on the remote control.

• When no signal is detected, the TV automatically switches off the sound. This is proper

operation and does not indicate a malfunction.

Good sound but poor • Adjust the contrast, color, tint and brightness setting. Try another auto picture setting.

color or no picture

Snowish picture and

noise

• Check the antenna connection.

Television not

responding to

remote control

• Check whether the batteries are working. Replace if necessary.

• Clean the remote control sensor lens on the monitor.

• Operating range between TV and the remote control should not be more than approximately twenty feet.

• You can still use the buttons on the right side of your TV.

• Check if the remote control is in the correct mode.

Control of accessory

devices

• The infrared signals of the screen may influence the reception sensibility of other peripherals Solution:

replace the batteries of the remote control of other devices. E.g. keep away a wireless headphone from

within a radius of approximately four feet.

The software will not Possibly the operating system is wrong.

install

Go to www.usasupport.magnavox.com to see which operating systems are supported.

Standby

Your TV consumes energy less than 1w in the standby mode.

After improper

shutdown

If your TV has been shutdown in an improper way (e.g. power drop, power cord plug out), starting up the

TV again will take a longer time than usual.

Miscellaneous

See Extras, Specifications on this user’s manual.

Download from Www.Somanuals.com. All Manuals Search And Download.

Do not allow a still picture to be displayed for an extended

period, as this can cause a permanent after-image to remain

on the Plasma TV.

After-images appear

Examples of still pictures include logos, video games,

computer images, and Teletext.

Note:

The permanent after-image on the Plasma TV resulting from

fixed image use is not an operating defect and as such is not

covered by the Warranty.

DVD

This product is not designed to display fixed images for

extended periods of time.

Care And Cleaning

WARNING concerning stationary images on the TV

Screen: Do not leave fixed images on the screen for extended periods of time. This can cause uneven aging of the Plasma

panel. Normal use of the TV should involve viewing of programs that have constantly moving or changing images. Do

not leave moving images on screen for extended periods of time. Do not display the same images too frequently; if you

do, subtle “ghost” images can be left on the Plasmascreen. Sources of stationary images may be Laser discs, video games,

Compact Discs Interactive (CD-i), paused Digital Video Discs (DVDs) or video tapes.

Here are some common examples of stationary images:

• DVD menus list DVD content.

• Letter box black bars that appear at the top and bottom of the TV screen when a wide screen (16:9) movie is viewed

on a TV with standard (4:3) aspect ratio. This occurs with some DVDs.

• Video game images and scoreboards

• Television station logos cause a problem if they are bright and stationary. Moving or low-contrast graphics are

less likely to damage the picture tube.

• Stock market tickers may appear at the bottom of the TV screen if the TV programming covers this news.

• Shopping channel logos, pricing displays may be bright and may appear constantly during the show.

These are usually apper in the same location on the TV screen.

TV Location

• To avoid cabinet warping, cabinet color changes, and an increased chance of TV failure, do not place the TV

where temperatures can become excessively hot -- for example, in direct sunlight or near a heating appliance.

• Allow a free flow of air around the TV.

Cleaning

• To avoid possible shock hazard, remove the TV’s power cord from the electrical outlet before cleaning.

• Regularly dust the TV with a dry, non-scratching duster.

• When cleaning the TV, take care not to scratch or damage the screen surface. Avoid wearing jewelry or using

anything abrasive. Do not use household cleaners. Wipe the screen with a clean cloth dampened with water.

Use even, easy, vertical strokes when cleaning.

• Occasionally vacuum the vents on the rear of the TV.

• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet. They may permanently blemish

the cabinet.

Download from Www.Somanuals.com. All Manuals Search And Download.

Annex 1 - MagnavoxTV software updrade with portable memory (not supplied)

Introduction

Magnavox offers software upgrade capability for your TV using

USB portable memory (not supplied).

After you have completed a software upgrade, your TV will

typically perform better.

What improvements are made depends on the upgrade

software you are using as well as the software your TV

contained before the upgrade. You can execute the

software upgrade procedure yourself.

Be aware that the content of this document is addressing

technical or software skilled users.

Preparing a portable memory (not supplied) for

software upgrade

For the procedure you will require:

• A personal computer with web browsing capability.

• An archive utility that supports the ZIP-format (e.g.

WinZip for Windows or StuffIt for Mac OS).

• A preferably empty USB memory stick.

Note: Only FAT/DOS-formatted portable memory is

supported.

New software can be obtained from your dealer or can be

downloaded from the www.usasupport.magnavox.com web site:

Go to www.usasupport.magnavox.com using the web

browser on your PC.

Follow the procedure to find the information and the software

related to your TV.

Select the latest software upgrade file and download it to your

PC.

Decompress the ZIP-file and copy the file “autorun.upg” to the

root directory of the USB portable memory (not supplied).

Note: Only use software upgrades that can be found on the www.

usasupport.magnavox.com web site.

Verifying the version of the TV software

Settings

Installation

Language

Before starting the software upgrade procedure, it is

advised to check what the current TV software is.

Autoprogram

Setup

Select Software Upgrade in the Installation menu.

Press the cursor right.

The Software Upgrade menu moves to the left panel.

Select Current Software Info to observe the version and the

description of the current software.

Installation

Weak channel installation

Software upgrade

Exit

Info

Download from Www.Somanuals.com. All Manuals Search And Download.

Automatic software upgrade procedure

Power off your TV and remove all memory devices.

Software Upgrade Application

Insert the USB portable memory (not supplied) that contains the

Please wait ...

downloaded software upgrade.

Switch on your TV with the power switch at the right side of the

TV.

At startup the TV will scan the USB portable memory (not

supplied) until it ﬁnds the update content. The TV will

automatically go to the upgrade mode. After a few seconds it will

display the status of the upgrade procedure.

Software Id:

TL32E-234

Done

Validating

Programming

Warning:

• You are not allowed to remove the USB portable memory (not

supplied) during the software upgrade procedure!

• In case of a power drop during the upgrade procedure, don’t

remove the USB portable memory (not supplied) from the TV.

The TV will continue the upgrade as soon as the power comes back.

• If you try to upgrade to a software version lower than the

current version, a conﬁrmation will be asked. Down grading to

older software should only be done incase of real necessity.

• If an error occurs during the upgrade, you should retry the

procedure or contact your dealer.

When the software upgrade was successful, remove the USB

portable memory (not supplied) and restart your TV with the

power switch at the right side of the TV.

Your TV will start up with the new software.

Note: Once the upgrade is ﬁnished use your PC to remove the TV

software from your USB portable memory (not supplied).

Manual software upgrade procedure

For a manual software upgrade copy the “autorun.upg” ﬁle in a

directory called “Upgrades” located in the root of the USB

portable memory (not supplied).

Insert the portable memory (not supplied) that contains the down-

loaded software upgrade.

Settings

Installation

Language

Software upgrade

Current software info

Autoprogram

Local upgrades/applications

Weak channel installation

Software upgrade

Select Software Upgrade in the Installation menu. Go to Local

upgrades/applications. The TV will list all compatible images

available on the USB portable memory (not supplied) and display

the data for each selected upgrade image.

Info

Select the correct upgrade image and press the red color button to

start the upgrade. Your TV will restart and will automatically go to

the upgrade mode. After a few seconds it will display the status of

the upgrade procedure.

Warning:

If you try to upgrade to a software version equal or lower than the

current version, a conﬁrmation will be asked. Downgrading to older

software should only be done in case of real necessity.

When the software upgrade was successful, remove the USB

portable memory (not supplied) and restart your TV with the

power switch at the right side of the TV. Your TV will start up

with the new

software.

Download from Www.Somanuals.com. All Manuals Search And Download.

FEDERAL COMMUNICATIONS COMMISSION(FCC) NOTICE (U.S. ONLY)

This equipment has been tested and found to comply with the limits for a Class B digital

device,pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable

protection against harmful interference in a residential installation.This equipment generates,

uses and can radiate radio frequency energy and,if not installed and used in accordance with

the instructions,may cause harmful interference to radio communications.Howerever,there

is no guarantee that interference will not occur in a particular installation.If this equipment

does cause harmful interference to radio or television reception,which can be determined by

turning the equipment off and on,the user is encouraged to try to correct the interference by

one or more of the following measures:

•

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

•

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

Download from Www.Somanuals.com. All Manuals Search And Download.

MAGNAVOX LIMITEDWARRANTY

One (1) Year Labor & One (1) Year Parts & One (1) Year Display

MAGNAVOX warrants this product against defect in

TO OBTAIN WARRANTY SERVICE IN THE U.S.A.,

material or workmanship, subject to any conditions set forth

as follows:

PUERTO RICO, OR U.S. VIRGIN ISLANDS…

Contact Magnavox Customer Care Center at:

1-800-705-2000

PROOF OF PURCHASE: You must have proof of the date

of purchase to receive repair on the product. A sales receipt

or other document showing the product and the date that

you purchased the product as well as the authorized retailer

included, is considered such proof.

TO OBTAIN WARRANTY SERVICE IN CANADA…

1-800-661-6162 (French Speaking)

1-800-705-2000 (English or Spanish Speaking)

COVERAGE:

(If product is determined to be defective)

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS

WARRANTY IS THE EXCLUSIVE REMEDY FOR THE

CONSUMER. MAGNAVOX SHALL NOT BE LIABLE FOR

ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR

BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON

THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED

BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION

TO THE DURATION OF THIS WARRANTY.

LABOR: For a period o

rom the date of

f one (1) year f

purchase, Magnavox will repair or replace the product, at its

option, at no charge, or pay the labor charges to any Magnavox

authorized repair facility. After the period of one (1) year,

Magnavox will no longer be responsible for charges incurred.

PARTS: For a period of one (1) year from date of purchase,

Magnavox will supply, at no charge, new or rebuilt replacement

parts in exchange for defective parts. Magnavox authorized

service centers will provide removal and installation of the

parts under the specified labor warranty.

Some states do not allow the exclusions or limitation of

incidental or consequential damages, or allow limitations on

how long an implied warranty lasts, so the above limitations or

exclusions may not apply to you. In addition, if you enter into a

service contract agreement with the MAGNAVOX partnership

within ninety (90) days of the date of sale, the limitation on

how long an implied warranty lasts does not apply.

DISPLAY: For a period of One (1) year from the date of

purchase, Magnavox will supply, at no charge, a new or rebuilt

active display device in exchange for the defective display.

Magnavox authorized service centers will provide removal and

installation of the parts under the specified labor warranty.

(PTV screens carry a thirty (30) day replacement warranty.)

EXCLUDED FROM WARRANTY COVERAGE

Your warranty does not cover:

• Labor charges for installation or setup of the product,

adjust-ment of customer controls on the product, and

installation or repair of antenna systems outside of the

product.

• Product repair and/or part replacement because of

improper installation, connections to improper voltage

supply, abuse, neglect, misuse, accident, unauthorized repair

or other cause not within the control of Magnavox.

• A product that requires modification or adaptation to enable

it to operate in any country other than the country for which

it was designed, manufactured, approved and/or authorized,

or repair of products damaged by these modifications.

• Damage occurring to product during shipping when

improperly packaged or costs associated with packaging.

• Product lost in shipment and no signature verification of

receipt can be provided.

• A product used for commercial or institutional purposes

(including but not limited to rental purposes).

• Products sold AS IS or RENEWED.

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.

Magnavox, P.O. Box 671539, Marietta, Ga. 30006-0026

Download from Www.Somanuals.com. All Manuals Search And Download.

La Crosse Technology Weather Radio C84612 User Manual
Land Pride Automobile Electronics 322 119A User Manual
Learning Resources Games LER 1764 User Manual
LG Electronics Computer Drive GMA 4020B User Manual
Lindy Network Card 70928 User Manual
Makita Air Compressor MAC5500G User Manual
Marantz Computer Monitor PD5020D User Manual
Maverick Ventures Thermometer ET 32 User Manual
Maxtor DVR 4 Channel Digital Video Recorder User Manual
McAfee Microscope Magnifier Version 70 User Manual