Magnavox Flat Panel Television 19MD301B User Manual

Owner’s Manual

Manuel du Propriétaire

Manual del Propietario

32MD311B/32MD301B

26MD311B/26MD301B

22MD311B

19MD311B/19MD301B

LCD TV/DVD

Necesita ayuda

inmediata?

1-866-341-3738

Quick Use Guide Inside!

Guide d’usage Rapide Incluse!

Guía de Uso Rápido Incluida!

MODEL NUMBER

SERIAL NUMBER

Download from Www.Somanuals.com. All Manuals Search And Download.

English

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

16. Tilt/Stability - All televisions must comply with recommended

international global safety standards for tilt

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

and stability properties of its cabinet design.

• Do not compromise these design standards by applying

excessive pull force to the front, or top, of the cabinet

which could ultimately overturn the product.

• Also, do not endanger yourself, or children, by placing

electronic equipment/toys on the top of the cabinet. Such

items could unsuspectingly fall from the top of the set and

cause product damage and/or personal injury.

17. Wall or Ceiling Mounting -The appliance should be

mounted to a wall or ceiling only as recommended by the

manufacturer.

18. Power Lines - An outdoor antenna should be located

away from power lines.

19. Outdoor Antenna Grounding - If an outside antenna

is connected to the receiver, be sure the antenna system is

grounded so as to provide some protection against voltage

surges and built up static charges.

7. Do not block any of the ventilation openings.

Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliﬁers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug.A polarized plug has two blades with

one wider than the other.A grounding type plug has two

blades and third grounding prong.The wide blade or third

prong are provided for your safety.When the provided

plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories speciﬁed by the

manufacturer.

Section 810 of the National Electric Code,ANSI/NFPA

No. 70-1984, provides information with respect to proper

grounding of the mast and supporting structure, ground-

ing of the lead-in wire to an antenna discharge unit, size of

grounding connectors, location of antenna-discharge unit,

connection to grounding electrodes, and requirements for

the grounding electrode. See Figure below.

12.

Use only with a cart, stand, tripod, bracket, or table

speciﬁed by the manufacturer, or sold with the appara-

tus.When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

20. Object and Liquid Entry - Care should be taken so

that objects do not fall and liquids are not spilled into the

enclosure through openings.

13. Unplug this apparatus during lightning storms or when un-

used for long periods of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into apparatus, the appara-

tus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

21. Battery Usage CAUTION -To prevent battery

leakage that may result in bodily injury, property damage,

or damage to the unit:

• Install all batteries correctly, with + and - aligned as

marked on the unit.

• Do not mix batteries (old and new or carbon and

alkaline, etc.).

• Remove batteries when the unit is not used for a long

time.

15. Damage Requiring Service -The appliance should be

serviced by qualiﬁed service personnel when:

A. The power supply cord or the plug has been damaged;

B. Objects have fallen, or liquid has been spilled into the

appliance;

C. The appliance has been exposed to rain

D. The appliance does not appear to operate normally or

exhibits a marked change in performance;

E. The appliance has been dropped, or the enclosure damaged.

Note to the CATV system installer :This reminder is provided to call the CATV system installer’s attention to Article

820-40 of the NEC that provides guidelines for proper grounding and, in particular, speciﬁes that the cable ground shall

be connected to the grounding system of the building, as close to the point of cable entry as practical.

Example of Antenna Grounding as

per NEC - National Electric Code

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

ELECTRIC SERVICE EQUIPMENT

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

Download from Www.Somanuals.com. All Manuals Search And Download.

FCC WARNING

This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference

unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an

unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the apparatus and receiver.

3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

DECLARATION OF CONFORMITY

Trade Name: MAGNAVOX

Responsible Party: FUNAI CORPORATION, Inc.

Address: 19900 Van Ness Avenue, Torrance, CA 90501 U.S.A.

Telephone Number: 1-866-341-3738

32MD311B/32MD301B

Model:

26MD311B/26MD301B

22MD311B/19MD311B/19MD301B

This Class B digital apparatus complies with Canadian ICES-003. StandardTelevision Receiving Apparatus, Canada BETS-7/NTMR-7

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

WARNING: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

Disconnect the mains plug to shut off when find trouble or not in use.The mains plug shall remain readily operable.

This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.

Make sure to leave a space of 4 inches (10cm) or more around this apparatus.

WARNING: To prevent injury, this apparatus must be securely attached to the wall in accordance with the instructions.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or

climbing on it. A falling unit can cause serious injury or even death.

LASER SAFETY

This apparatus is classified as a CLASS 1 LASER PRODUCT. This apparatus employs a

laser. Only a qualified service person should remove the cover or attempt to service this

apparatus, due to possible eye injury.

CAUTION: Use of controls or adjustments or performance of procedures other than

those specified herein may result in hazardous radiation exposure.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This item incorporates copy

protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation.

Reverse engineering and disassembly are prohibited.

Like all LCD products, this set contains a lamp with Mercury, please dispose of according to all Local, State and

Federal laws. For the disposal or recycling information, contact:

www.mygreenelectronics.com or www.eiae.org

• The American Academy of Pediatrics discourages television

viewing for children younger than two years of age.

LOCATION AND HANDLING

• Do not install the unit in direct sunlight or in a place subject to dust

or strong vibration.

NOTE ABOUT RECYCLING

• Avoid a place with drastic temperature changes.

• Install the unit in a horizontal and stable position. Do not place

anything directly on top or bottom of the unit. Depending on your

external devices, noise or disturbance of the picture and/or sound

may be generated if the unit is placed too close to them. In this case,

please ensure enough space between the external devices and the

unit.

• Depending on the environment, the temperature of this unit may

increase slightly.This is not a malfunction.

• Be sure to unplug the AC power cord from the AC outlet before

moving or carrying the unit.

• This unit’s packaging materials are recyclable and

can be reused. Please dispose of any materials in

accordance with your local recycling regulations.

• Batteries should never be thrown away or

incinerated but disposed of in accordance with your

local regulations concerning chemical wastes.

• For product recycling information, please visit - www.magnavox.com

WHEN CARRYINGTHIS UNIT

• At least 2 people are required when

carrying this unit.

• Make sure to hold the upper and bottom

frames of the unit ﬁrmly as illustrated.

DEW CONDENSATION WARNING

• Dew condensation may form inside the unit in the following

conditions. If so, do not use this unit at least for a few hours until its

inside gets dry.

-The unit is moved from a cold place to a warm place.

- Under conditions of high humidity.

- After heating a cold room.

TO AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE

• Do not handle the AC power cord with wet hands.

• Do not pull on the AC power cord when disconnecting it from an

AC outlet. Grasp it by the plug.

Download from Www.Somanuals.com. All Manuals Search And Download.

• Do not put your ﬁngers or objects into the unit.

English

Child Safety

Download from Www.Somanuals.com. All Manuals Search And Download.

Trademark Information

INTRODUCTION

Contents

HDMI, the HDMI Logo, and High-Deﬁnition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC in the

United States and other countries.

Important Safety Instructions

Child Safety

INTRODUCTION

Trademark Information

Features

Supplied Accessories

Symbols Used in this Manual

Attaching the Base

Manufactured under license from Dolby Laboratories. Dolby and the

double-D symbol are trademarks of Dolby Laboratories.

Mounting the Unit onYour Furniture

Tilt Stand <22MD311B/19MD311B/19MD301B only>

Installing the Batteries

Control Panel

Terminals

Remote Control Function

ENERGY STAR^®is a joint program of the U.S. Environmental

Protection Agency and the U.S. Department of Energy helping us all

save money and protect the environment through energy efﬁcient

products and practices.

PREPARATION

Antenna Connection

Connection to Cable Receiver or Satellite Box

Plug In the AC Power Cord

Initial Setup

Consumer Notice:

ThisTV has been set to maximize energy efﬁciency while delivering

the best possible picture using the factory installed home mode

settings. Changing or enabling other features in thisTV (e.g. brightened

backlighting) will possibly increase energy consumption beyond the

original ENERGY STAR^®qualiﬁed limits.

WATCHINGTV

SleepTimer

Switching Each Input Mode

Freeze Mode

Channel Selection

TV Screen Display Mode

Sound Functions

TV Screen Information

is a trademark of DVD Format/Logo Licensing Corporation.

USING FUNCTIONS

Picture

Sound

Channel

Features

Language

DVD

Language Code List

OPERATING DVD

Playable Media

Unplayable Media

Playback

Disc Menu

Resume Playback

Paused and Step-by-step Playback

Fast Forward/Fast Reverse

Slow Forward/Slow Reverse

Zoom

Search Functions

Repeat Playback

Repeat A-B Playback

Random Playback

Programmed Playback

On-screen Display

Special Settings

transmitted, disseminated, transcribed, downloaded or stored in any

storage medium, in any form or for any purpose without the express prior

written consent of Funai. Furthermore, any unauthorized commercial

distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai

reserves the right to change the content herein without the obligation to

notify any person or organization of such changes.

CONNECTING DEVICES

External Device Connection

Cable Management

with the

design is a registered trademark of Funai Electric

<32MD311B/32MD301B/26MD311B/26MD301B only>

Co., Ltd. and may not be used in any way without the express written

consent of Funai. All other trademarks used herein remain the exclusive

property of their respective owners. Nothing contained in this manual

should be construed as granting, by implication or otherwise, any license

or right to use any of the trademarks displayed herein. Misuse of any

trademarks or any other content in this manual is strictly prohibited.

Funai shall aggressively enforce its intellectual property rights to the

fullest extent of the law.

USEFULTIPS

Troubleshooting Guide

FAQ

INFORMATION

Glossary

Maintenance

MAGNAVOX is a registered trademark of Philips Electronics North

America Corporation and is used by Funai Electric Co. Ltd. and Funai

Corporation, Inc. under license from Philips Electronics North America.

General Speciﬁcations

Other Speciﬁcations

Limited Warranty

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Features

DVD

•

Dolby Digital Sound

•

DTV/TV/CATV

Enjoy Dolby Digital multi-channel surround sound when you

connect the unit to your Dolby Digital decoder.

You can use your remote control to select channels which are

broadcast in digital format and conventional analog format.Also,

cable subscribers can access their cableTV channels.

Still/Fast/Slow/Step Playback

Various playback modes are available including still pictures, fast

forward/reverse, slow motion and step frames.

•

Information Display (ATSC only)

You can display the title, contents and other information of the

current DTV program on theTV screen.

DVD Menus in a Desired Language

You can display DVD menus in a desired language, if available on

a DVD-video.

Autoprogram

This unit automatically scans and memorizes channels available in

your area, eliminating difﬁcult setup procedures.

Auto standby

If there is no operation for 20 minutes, the unit will go into

standby mode automatically.

Child Lock

This feature allows you to block children’s access to inappropriate

programs.

•

Parental Lock

Block the viewing of a DVD-video unsuitable for children.

Closed Caption Decoder

Resume Playback

Built-in closed caption decoder displays text for closed caption

supported programs.

Lets you resume playback from the point at which playback was

stopped.

•

MTS/SAPTuner

•

Bit Rate Indication

Audio can be selected from the remote control.

DRC (dynamic range control)

Auto Standby

You can control the range of sound volume.

If there is no input signal and no operation for 15 minutes, the

unit will go into standby mode automatically.

Accessing from MODE button

•

SleepTimer

You can set the unit to go into standby mode after a speciﬁc

amount of time.

During playback

Choices for On-screen Language

Select your on-screen language:

English, Spanish or French.

•

Subtitles in a Desired Language

You can select a desired language for displaying subtitle, if that

language is available on a DVD-video.

Selecting a Camera Angle

•

Stereo Sound Function

You can select the desired camera angle, if a DVD contains

sequences recorded from different angles.

PLL Frequency SynthesizedTuning

Provides free and easy channel selection and lets you tune

directly to any channel using the number and decimal point “•”

buttons on the remote control.

Zoom

Allows you to enlarge the size of picture image.

•

Black Level Adjustment

Virtual Surround

•

Various Adjustment for Picture and Sound

Customizes image quality suitable for your room and sets your

sound preference.

fun-Link via HDMI Link (HDMI Cable not Included)

fun-Link allows your other HDMI link devices to be controlled by

the HDMI cable connected to yourTV.

HDMI Input

ComponentVideo Input

S-Video Input

chapter search/title search/track search/time search

•

Marker

The part on the disc designated by user can be called back.

•

Repeat

chapter/title/track/all/A-B

Accessing from MODE button

AV Input

Digital Audio Output

In stop mode

•

Program Playback for audio CD

<32MD311B/32MD301B/26MD311B/26MD301B only>

•

You can program the order of tracks to play them back in

designated order.

HDMI-DVI Input

When using HDMI 1 Input, you can enjoy this unit as a PC

monitor if your PC has a DVI output terminal.

•

Random Playback for audio CD

This unit can shufﬂe the order of tracks to play them back in

randomly.

•

Analog Audio output

<22MD311B/19MD311B/19MD301B only>

Accessing from AUDIO button

•

HDMI-DVI Input

If your video device has DVI output jack, use an HDMI-DVI

conversion cable to connect the unit.

During playback

•

Choices for Audio Language and Stereo Sound Function

Select your desired languages or stereo sound function when

different options are available on your disc.

•

PC Input

Headphone Audio Output

Download from Www.Somanuals.com. All Manuals Search And Download.

Supplied Accessories

Attaching the Base

You must attach the base to the unit to have it as a table top

unit. Be sure the front and rear of the base match the proper

direction.At least 2 people are required for these steps.

Owner’s Manual

Quick Start Guide Registration card

If you have any questions, please visit our website at

www.magnavox.com/support

^QS^ut^ickart

Spread a thick and soft cloth over a table as shown at step 2.

Place the main unit face down onto it. Make sure not to

damage the screen.

Installation

Instalación

Best

Better

Good

Insert 2 hooks under the

bottom of the main unit

into base holes (shown by

➁

TV base and screws

Remote Control

(NF801UD)

Batteries

arrow ), then move the

base in the direction as

➀

shown by arrow until it

➀

➁

Screws packed with this unit:

(AAA, 1.5V x 2)

FRONT

stops and the screw holes

are aligned. Make sure not

to put the AC power cord between the base and the unit.

Model

Quantity

Size

32MD311B

32MD301B

26MD311B

26MD301B

22MD311B

19MD311B

19MD301B

M4 x 20

Drive Phillips head screws

into the threaded holes

at the bottom of the base

until they are tight.

M4 x 12

To remove the base from this unit

• Unscrew the Phillips head screws in step 3.

After the screws are removed, move the base in the opposite direction

as shown by arrow in step 2, then pull the base up toward the rear of

the unit. Be careful not to drop the base when you remove it.

Note

• If you lose the screws, please purchase the above-mentioned

Phillips head screws at your local store.

• If you need to replace these accessories, please refer to the part

name and No. with the illustrations and call our toll free customer

support line found on the cover of this manual.

Note

When using a universal remote control to operate this unit.

• When attaching the base, ensure that all screws are tightly fastened. If

the base is not properly attached, it could cause the unit to fall, resulting

in injuries as well as damage to the unit.

• Make sure to use a table which can support the weight of this unit and

is larger than this unit.

• Make sure the component code on your universal remote control

is set to our brand. Refer to the manual accompanying your

remote control for more details.

• We do not guarantee 100% interoperability with all universal

remote controls.

• Make sure the table is in a stable location.

• When attaching the base, ensure that FRONT written on the base is

↑

Symbols Used in this Manual

upward. If it’s not upward, the 2 hooks don’t ﬁt in the base.

The following is the description for the symbols used in this

manual. Description refers to:

TV FUNCTIONS

ATSC

NTSC

: DigitalTV operation

:Analog/CableTV operation

• If neither symbol appears, the operation is applicable to both.

DVD FUNCTIONS

DVD

: Playback of DVD-video

: Playback of audio CD

• If neither symbol appears under the function heading, operation is

applicable to both.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Mounting the Unit onYour Furniture

Screw this unit on your furniture tightly using wood screws

(not supplied) in the 2 holes at the back of the base as shown.

• Recommended screw dimension : 0.201 x 0.788 inches(5.1 x 20 mm)

Installing the Batteries

Install the batteries (AAA, 1.5V x 2) matching the polarity

indicated inside battery compartment of the remote control.

screw holes

Battery Precautions:

rear of the unit

• Be sure to follow the correct polarity as indicated in the battery

compartment. Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g.Alkaline and

Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or old

batteries with fresh ones.

Note

• When you remove this unit make sure to unscrew the wood

screws from your Wood Stand, Furniture and other wood item.

• If the device is not to be used for a long period of time, remove the

batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries; they can overheat and rupture.

Tilt Stand <22MD311B/19MD311B/19MD301B only>

You can adjust the stand to change

the angle of the unit (-2.5° to 10°).

-2.5°

10°

Download from Www.Somanuals.com. All Manuals Search And Download.

Control Panel

MD311B series

1 VOLUME +/−

p.17

➠

Press to adjust the volume or move right ( )/left ( )

−

through the main menu items.

2 MENU

3 CHANNEL +/−

p.19

p.16

➠

Press to select channels or move up ( )/down ( )

−

through the main menu items.

32”

4 A (eject)

p.31

p.15

➠

DVD

5 C (stop)

9 10 11

6 B (play)

32”

POWER

Press to turn the unit on and go into standby mode.

To completely turn off the unit, you must unplug the AC

power cord.

POWER

−VOLUME+

−CHANNEL+

8 DVD indicator

Lights up orange when a disc is inserted.

9 STAND BY indicator

Lights up red when the unit goes into standby mode.

26”/22”/19”

10 POWER ON indicator

DVD

Lights up green when power is on.

POWER

−VOLUME+

−CHANNEL+

11 Infrared sensor window

Receives infrared rays transmitted from the remote

control.

MD301B series

Terminals

32”

DVD STAND BYPOWER ON

9 10 11

32”

POWER

−VOLUME+

−CHANNEL+

26”/19”

DVD

STAND BY POWER ON

POWER

−VOLUME+

−CHANNEL+

DVI

ANALOG

AUDIO

Download from Www.Somanuals.com. All Manuals Search And Download.

English

26”

<32MD311B/32MD301B/26MD311B/26MD301B>

Side Panel

12 HDMI 2 Input jack

p.14, 36

➠

13 S-Video/CompositeVideo/Audio (L/R) Input jacks

forVIDEO

p.37, 38

➠

Rear Panel

14 Disc loading slot

p.31

p.14

p.39

➠

15 AC power cord

16 Cable management

17 ComponentVideo and Audio (L/R) Input jacks

p.14, 37

➠

18 Analog Audio (L/R) Output jacks

p.39

➠

19 Analog Audio (L/R) Input jacks for HDMI 1

p.36, 39

➠

Audio cable connection from a DVI device.

When you connect your PC that has a DVI terminal,

use a stereo mini plug conversion cable as well.

(For HDMI 1 Input jack only)

20 Digital Audio Output jack

21 Antenna Input jack

p.38

➠

p.13

22 HDMI 1/HDMI-DVI Input jack

p.14, 36, 39

HDMI connection for HDMI or DVI device.

When you connect your PC that has a DVI terminal,

you can enjoy this unit as a PC monitor.

22”/19”

<22MD311B/19MD311B/19MD301B>

Side Panel

12 HDMI 2 Input jack

p.14, 36

➠

13 S-Video/CompositeVideo/Audio (L/R) Input jacks

forVIDEO

p.37, 38

➠

14 Headphone Audio Output jack

Headphone connection for personal listening.

Rear Panel

15 Antenna Input jack

p.13

➠

HDMI 2

16 Disc loading slot

p.31

17 AC power cord

p.14

18 PC (VGA) Input jack

19 HDMI 1/HDMI-DVI Input jack

p.39

p.14, 36

20 ComponentVideo and Audio (L/R) Input jacks

p.14, 37

➠

HEAD PHONE

21 Digital Audio Output jack

p.38

22 Analog Audio (L/R) Input jack for PC connection

p.39

➠

Mini-plug audio cable connection from PC.

23 Analog Audio (L/R) Input jacks for HDMI 1

Note for service terminal

p.36

➠

service terminal (service use only)

Audio cable connection from a DVI device.

• Use this terminal only when a software update is necessary.

(For HDMI 1 Input jack only)

• User should not connect any devices to the service terminal such

as digital camera, keyboard, mouse, etc. (because these will not

work).

• The software update is, in most cases, handled by an authorized

service person or in some circumstances the user may be asked

to do the software update themselves.

Download from Www.Somanuals.com. All Manuals Search And Download.

6 MENU

p.19

p.15

p.18

p.16

Remote Control Function

➠

7 ▲/▼/◄/►(cursor)

8 OK

9 BACK

10 PREV CH

Press to return to the previously viewed channel.

11 VOL +/−

p.17

p.16

➠

12 Number buttons

ATSC

NTSC

• Press to select channels.

(dot)

•

• Press to shift the subchannel from the main channel.

DVD

• Press to select chapter, title (DVD), or track (CD)

directly.

+10 button

• Press to select 10 or higher number of chapters.

13 FREEZE

p.16

➠

ATSC

NTSC

• Press to pause screen image.

14 EJECT A

p.31

p.17

➠

Press to eject the disc.

15 DISC MENU

Press to display the menu on a disc.

16 TITLE

Press to display the title menu (DVD).

17 FORMAT

➠

(power)

p.15

Press to select aspect ratio available for theTV screen.

➠

Press to turn the unit on and go into standby mode.

To completely turn off the unit, you must unplug the AC

power cord.

18 INFO

p.18, 34

p.31

➠

19 REV E/FWD D

Press to begin slow forward or slow reverse playback

during the pause mode (DVD) and search backward or

forward through a disc.

2 SLEEP

p.16

p.17

➠

3 SOURCE

4 SAP/AUDIO

ATSC

PLAY B

Press to begin the disc playback.

p.31

➠

SKIP H/SKIP G

p.32

• Press to select the audio language.

NTSC

➠

Press to skip backward or forward chapters, titles (DVD)

or tracks (CD) of the disc.

• Press to select the audio mode.

PAUSE F

Press to pause the disc playback.

p.31

➠

DVD

• Press to select the audio language (DVD), or sound

mode (CD).

STOP C

Press to stop the disc playback.

p.31

5 MODE

p.7

➠

20 MUTE

p.17

➠

• Press to arrange the playing order or playback

randomly (CD).

21 CH +/−

p.16

• Press to set the black level (DVD) and the virtual

surround on or off.

• Press to change the camera angle to see the sequence

being played back from different angle (DVD).

• Press to search chapter, title (DVD), track (CD) or time.

• Press to set the marker.

22 CLEAR

p.32, 33

• Press to clear the numbers entered incorrectly.

• Press to cancel the point A for A-B repeat.

• Press to remove the track number in program input

(CD).

• Press to repeat playback chapter, title (DVD), track, disc

(CD) repeatedly or between designated point A and B.

• Press to magnify the part of picture (2x and 4x : DVD).

• Press to select the subtitles on a disc (DVD).

Download from Www.Somanuals.com. All Manuals Search And Download.

English

PREPARATION

26”

No supplied cables are used with these connections:

VHF/UHF

RF coaxial cable

analog

• Please purchase the necessary cables at your local store.

DTV antenna

Before you connect:

Be sure your antenna or other device is connected properly

before plugging in the AC power cord.

Antenna Connection

Connect the RF coaxial cable on your home outlet to the

antenna input jack of this unit.

32”

VHF/UHF

analog

DTV antenna

22”/19”

cable TV signal

RF coaxial cable

Once connections are completed, turn on the unit and begin

initial setup. Channel scanning is necessary for the unit to

memorize all available channels in your area. [Initial Setup]

p.15

cableTV signal

➠

Note

• If you have any question about the DTV’s antenna, visit

www.antennaweb.org for further information.

• Depending on your antenna system, you may need different types

of combiners (mixers) or separators (splitters) for HDTV signal

the minimum RF bandpass on these devices is 2,000MHz or 2GHz.

• For your safety and to avoid damage to this unit, please unplug the

RF coaxial cable from the antenna input jack before moving the

unit.

• If you did use an antenna to receive analogTV, it should also

work for DTV reception. Outdoor or attic antennas will be more

effective than a set top or inside antenna.

• To switch your reception source easily between antenna and cable,

install an antenna selector.

• If you are not receiving a signal from your cable service, contact the

Cable provider.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to Cable Receiver or

Satellite Box

Use an HDMI or ComponentVideo cables to connect the

HDMI or the ComponentVideo Input jacks of the unit to the

HDMI or the ComponentVideo output jacks of the cable

receiver/satellite box.

26”

HDMI cable

component video cables

(red/blue/green) and audio cables

If you connect to the unit’s ComponentVideo Input jacks,

connect Analog Audio cables to the Analog Audio L/R Input

jacks for the ComponentVideo connector jacks.

(green)(bluue) (red)

component video cables

32”

(red/blue/green) and audio cables

STEREO

PCM

ANT IN

cable receiver/

satellite box

RF coaxial cable

(green) (blue) (red)

COMPONENT VIDEO OUT

Pb/Cb Pr/Cr

AUDIO OUT

(green)(bluue) (red)

HDMI OUT

satellite dish

STEREO

PCM

HDMI cable

cable receiver/

satellitte box

component video

cables (redd/blue/green)

and audio cables

ANT IN

HDMI cable

22”/19”

satellitte dish

RF coaxial cable

cableTV signal

includding PPV

cableTV signal

includding PPV

You can also connect this unit to the cable receiver or satellite

box other than the HDMI or the ComponentVideo output jacks

or CompositeVideo output jack (

might have different output jacks.

p.37, 38) because they

➠

Required cables and connecting methods of the cable receiver/

satellite box, or the availability channel for the clear QAM may

differ depending on the cable/satellite provider or localTV

broadcaster.

For more information, please contact your cable/satellite provider

or localTV broadcaster.

Note

• Use an HDMI cable with the HDMI logo (a certiﬁed HDMI cable).

High Speed HDMI cable is recommended for the better

compatibility.

Plug In the AC Power Cord

Make sure that the AC power cord must be plugged to an AC

outlet after all the necessary connections are made.

Caution:

• Do not connect the AC power cord to a power supply outside

the indicated voltage of this unit (AC 120V).

Connecting the AC power cord to a power supply outside of this

range may result in ﬁre or electrical shocks.

Note

• Each time you plug in the AC power cord, no operations will be

performed for a few seconds.This is not a malfunction.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Use ◄/► to select the desired location setting, then press

OK.

These operations are accessible by remote control.

Some may also be accessible by controls on the main unit.

[Home] is ENERGY STAR^®qualiﬁed setting.

Initial Setup

Select “Retail” or “Home” for your location.

This section will guide you through the unit’s initial setting

which includes selecting a language for your on-screen menu

and autoprogram, which automatically scans and memorizes

viewable channels.

Retail

Home

Before you begin:

Make sure the unit is connected to antenna or cable.

Select

• Select [Retail] store, the unit will be set up with

predefined setting for retail displays. In this setting, the

power consumption may possibly exceed the limited

requirement of the ENERGY STAR^®qualification.

• Select [Home], the unit is set to maximize the energy

efficiency for home setting and it can be adjusted

through a choice of picture and sound quality according

to your preference.

• When the initial setup is completed, the lowest

memorized channel with the confirmation message of

the location setting will be displayed on theTV screen.

• You must set [Home] in step 4. Otherwise, [Picture]

and [Sound] settings you adjusted will not be

memorized after the unit goes into standby mode.

After making all the necessary connections,

press to turn on the unit.

• It may take a few moments to turn on the unit for the

first time.

• [Initial Setup] menu appears automatically after the

unit is turned on.

Use ▲/▼ to select the on-screen language from the

choices (English/Español/Français) on the right side of the

TV screen, then press OK.

Use ▲/▼ to select [Antenna] forTV channels or [Cable]

for CATV channels, then press OK.

Initial Setup

Note

Antenna

Cable

Skip

Make sure the antenna is connected to ''ANT. IN'' jack.

Select your signal source.

• If you are not receiving a signal from your cable service, contact

the Cable provider.

• If you press or MENU during autoprogram, this setup of TV

channels will be canceled.

Antenna

• The initial autoprogram function can be executed for either

[Antenna] or [Cable] only once.When you change the

Cable

ANT.IN

connection (Antenna/Cable), set [Autoprogram] again.

• If there is no signal input from the antenna terminal and no

p.21

➠

BACK

Select

Back

Skip

operation for several seconds after you turn on the unit, helpful

hints appears. Follow the instructions listed on theTV screen.

• [Autoprogram] will begin.

Initial Setup

Retry

No channel is registered.

Try Autoprogram again?

Please wait while the system is scanning for channels.

Auto programming may take more than 20 minutes to

complete.

Later

Verify that you have a cable connected to the “ANT. IN” jack

on the back of the TV, the channel installation process

searches this connection. If you are using a cable or satellite

box, please confirm the input which you have connected to the

box and press “SOURCE” key on the remote control to select

the appropriate source input.

Digital channels

Analog channels

0 ch

Select

Skip

After an initial setup is completed...

• If you want to scan the channels automatically again.

[Autoprogram] p.21

➠

• You can add the desired cable and analog channels

unmemorized by autoprogram.

[Add Channels]

p.22

➠

• If you want to change to another language.

[Language] p.27

➠

• If you want to change the location setting.

[Location] p.26

➠

Download from Www.Somanuals.com. All Manuals Search And Download.

WATCHINGTV

SleepTimer

can set the unit to go into standby mode after an incremental period of time.

Press SLEEP repeatedly to change the amount of time (increases

the time by 30 minutes up to 120 minutes).

Sleep

120min.

Press SLEEP once to call up the display for checking the remaining time.

•

To cancel sleep timer, press SLEEP repeatedly until [Sleep Off] is

displayed.

Switching Each Input Mode can easily switch with the remote control

betweenTV (ATSC or NTSC) and external devices when they are connected to the unit.

Press SOURCE or CH + repeatedly to cycle through the input modes.

e.g.) 32MD311B/32MD301B/26MD311B/26MD301B

Source

Video

Component

Video

11.1

DTV/TV channel

Component

HDMI1

HDMI2

HDMI1

(or PC input)

•

Pressing CH − reverses the direction of the input modes.

These may differ depending on what product you purchased. For example, 22MD311B,

19MD311B or 19MD301B will be displayed [HDMI1], [HDMI2] and [PC] instead.

Freeze Mode can freeze the image shown on theTV screen for 5 minutes.

Press FREEZE to freeze the image.

Freeze

•

The sound output will not be paused.

To cancel freeze mode, press any buttons except

Channel Selection

Select channels by using CH +/− or the Number buttons.

•

To select the memorized channels,

use CH +/− or the Number buttons.

To select the non-memorized channels,

use the Number buttons.

11.1

•

To use the Number buttons

ATSC

When selecting digital channel 11.1

Be sure to press • before entering the subchannel number.

NTSC

When selecting cable or analog channel 11

Press PREV CH to return to the previously viewed channel.

• [No Signal] will appear on theTV screen after the subchannel

broadcast is over.

Note

• [Audio only program] message will appear on theTV screen, when you

receive only sound signal.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

TV Screen Display Mode

5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal.And 3 types of display

modes can be selected for PC input signal.

Press FORMAT repeatedly to switch theTV aspect ratio.

Normal displays a 16:9 picture at its original size.

For 16:9 video signal

4:3 displays a 16:9 picture at a 4:3 size; the picture is

shortened horizontally. Sidebars appear on both edges

of the screen.

Movie expand displays a 16:9 picture that is

vertically stretched to ﬁll the screen.This only crops

out the top of the picture.

Normal

4:3

Movie expand

Zoom displays a 16:9 picture at its maximum size

without changing its horizontal and vertical ratio.

Wide displays a horizontally stretched picture.This

crops out the left and right sides of the picture.

Wide

Zoom

Normal displays a 4:3 picture at its original size.

Sidebars appear on both edges of the screen.

For 4:3 video signal

16:9 displays a 4:3 picture at a 16:9 size; the picture is

stretched horizontally to ﬁll the screen.

Movie expand displays a 4:3 picture at a 16:9 size;

the picture is stretched more vertically at the top of

the screen.This crops out the top of the picture.

Normal

16:9

Movie expand

Zoom displays a 4:3 picture at a 16:9 size; at its

maximum size that is more vertically stretched to ﬁll the

screen.This crops out the top and bottom of the picture.

Wide displays the picture with its center at the

original size and the edges stretched horizontally to ﬁll

the screen.

Wide

Zoom

Normal displays a proportionately stretched picture.

Sidebars appear on both edges of the screen.

HDMI1

For PC input signal through

Input mode

Full displays a picture that is stretched out of

proportion horizontally to ﬁll the screen.

Dot By Dot displays a picture in its original size.

Normal

Full

Dot By Dot

For 22MD311B, 19MD311B and 19MD301B, PC input mode is available.They can only accept the PC input signal when the unit

is connected to a PC (VGA) Input jack.

Sound Functions

describe how to change the audio or the audio language as well as the volume.

Volume Adjustment

Use VOL +/− to adjust the volume.

Volume

Silence Mode

will be displayed for a few seconds when adjusting the volume.

Press MUTE to turn off the sound temporarily.

will be displayed for a few seconds.

Mute

•

Press MUTE again or VOL +/− to recover the original volume.

Switching Audio Mode

ATSC

NTSC

Press SAP/AUDIO repeatedly to cycle through the available

Press SAP/AUDIO to display the currently selected audio mode.

While receiving an MTS broadcast, press repeatedly to cycle

through the available audio channel.

audio languages.

•

Available languages differ depending on the broadcast.

[Other] is displayed when the audio language cannot be

acquired, or the acquired languages are other than English,

Spanish or French.

SAP / STEREO

e.g.) When all audio are available

11.1

SAP / STEREO

SAP / MONO

SAP / STEREO

English 1/3

STEREO : Outputs stereo-audio

SAP

: Outputs second audio program

MONO : Outputs mono-audio

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Screen Information

You can display the currently selected channel or other

information such as the audio mode on theTV screen.

In the digital mode, the detailed broadcasting information

for the current off the air channel such as program title and

program guides are displayed.

Press INFO.

ATSC

Day of Memories

KABC

11-1

English 1/2

quarter-century ago,which may now qualify as the

good old days of newspapering,run-of-paper sales

accounted for 80 percent of the industry's advertising

revenues.Department stores and supermarket were

1080i HD

16:9

6, 7, 8

Rating

TV: TV-14

NTSC

SAP / STEREO

480i SD 4:3

6, 7, 8

TV-PG DLSV

program title

program guide

(The program guide added to broadcasting

information is displayed to a maximum of 4 lines.)

broadcast station

channel number

audio language (ATSC)/audio mode (NTSC)

[Switching Audio Mode]

effective scanning lines and scan mode

TV format

p.17

➠

program’s image aspect ratio

CC (not available if closed caption is set to [Off])

10 child lock rating

Press INFO or BACK to hide the information.

Note

• When the program guide consists of more than 4 lines, use ▲/▼

to scroll to the next/previous lines.

• [No description provided.] is displayed when the program guide

is not provided.

• While the program guide is displayed, the closed caption function

is interrupted.

• In external input mode, the following screen is displayed;

e.g.) When an external device is connected toVideo Input jack.

Video

480i SD

TV-PG DLSV

• The information display will automatically disappear in 1 minute.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

USING FUNCTIONS

This section describes the overview of the main menu

displayed when you press MENU.

The main menu consists of the function setting items below.

Use ▲/▼ to select a desired menu and an item, then

press OK to determine the setting.

Press MENU to display

the main menu.

Page 20

Picture

Sound

Adjusting the picture mode, or customize the

picture quality as your preference.

Channel

Features

Language

DVD

Sound

Page 20

Adjusting the sound mode, equalizer and some

other sound functions.

Page 21

Channel

Scanning the channels available in your area and

see what the antenna levels are.

Page 22

Features

Adjusting the Closed Caption, parental guide and

some other useful functions.

Page 27

Language

You can choose English, Spanish, or French

as your on-screen language.

Page 27

DVD

You can choose the desired DVD settings.

When the setting is completed, press MENU to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture

Smart Sound

Equalizer

Standard

Picture

Sound

Channel

Features

Language

DVD

Auto Volume Leveling

TV Speakers

Off

Before you begin:

Ext. Amp

Stereo

You must set [Home] in [Location]. p.26

➠

Primary MTS

Otherwise, the settings you adjusted will not be memorized

after the unit goes into standby mode.

Use ▲/▼ to select the item you want to adjust, then press

OK.

[AutoVolume Leveling] will only display for 32MD311B,

32MD301B, 26MD311B and 26MD301B.

Adjust the following items.

Smart Picture

Brightness

Contrast

Personal

Picture

Sound

Smart Sound

Use ▲/▼ to select the desired setting, then press OK.

([Personal], [Standard], [Movie], [Music], and [News])

Channel

Features

Language

DVD

Color

Tint

Sharpness

Color Temperature

Normal

Equalizer

Adjust tonal quality for each frequency.

Use ◄/► to select the speciﬁc frequency and use ▲/▼ to

adjust the level, then press OK.

Adjust the following items.

Smart Picture

AutoVolume Leveling

Use ▲/▼ to select the desired setting, then press OK.

This function keeps a constant loudness differential between

([Personal], [Standard], [Sports], [Movie], and [Game])

theTV commercials and the programs.

Use ▲/▼ to select the desired option, then press OK.

Brightness, Contrast, Color, Tint, Sharpness,

Reduces volume differences between the

TV commercials and the programs.

ColorTemperature

You can only adjust the following options when you set to

[Personal] in [Smart Picture].

Off

Removes the auto volume leveling.

TV Speakers

Use ▲/▼ to select the desired setting, then press OK.Then

use ◄/► to adjust the setting.

Select the audio output from the unit’s speakers, or not. If your

ampliﬁer is HDMI link function compatible and connected by

an HDMI cable to this unit, some sound operations such as

volume up can be changed by using this unit’s remote control.

Cursor ◄

Cursor ►

Brightness

Contrast

to decrease brightness to increase brightness

to decrease contrast

to increase contrast

Make sure [fun-Link Control] is set to [On].

p.26

➠

to decrease color

intensity

to increase color

intensity

Color

Use ▲/▼ to select the desired option, then press OK.

Tint

to add red

to soften

to add green

to sharpen

The sound will be output from the unit’s speakers.

Sharpness

The sound will not be output from the unit’s

speakers.

Off

Color

Temperature

to add warm colors

to add cool colors

You can control audio output from your

connected HDMI link devices by using this unit's

remote control.

Ext. Amp

Note

Sound

• We do not guarantee 100% interoperability with other brands of

HDMI link compliant devices.

Before you begin:

You must set [Home] in [Location]. p.26

Otherwise, the settings you adjusted will not be memorized

after the unit goes into standby mode.

➠

Primary MTS

You can set the output mode as a default for the sound mode

(NTSC only).

This setting is not interlocked when you change the output

Use ▲/▼ to select the item you want to adjust, then press

OK.

mode by pressing SAP/AUDIO. [Sound Functions]

p.17

➠

Use ▲/▼ to select the desired option, then press OK.

Stereo

Mono

SAP

Outputs stereo-audio.

Outputs mono-audio.

Outputs second audio program.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Note

Channel

• After setting [Autoprogram], using CH+/− on the remote control

skips unavailable programs automatically.

• If you are not receiving a signal from your cable service, contact

the Cable provider.

• If you press or MENU during autoprogram, the setup ofTV

Before you begin:

Make sure the unit is connected to antenna or cable.

channels will be canceled.

• Even if [Autoprogram] is completed, the channel setting will be

lost if the AC power cord is unplugged before the unit goes into

Use ▲/▼ to select the item you want to adjust, then press

OK.

standby mode by pressing

• The PIN code will be required once you set a PIN code in the

[Child Lock]. p.23

➠

• If you want to change your PIN code, follow the instruction of

Autoprogram

Channel List

Add Channels

Antenna

Picture

Sound

[Change PIN].

p.25

➠

Channel

Features

Language

DVD

Channel List

The channels selected here can be skipped when selecting the

channels using CH+/−.

Those channels can still be selected with the Number buttons.

Use ▲/▼ to select [Channel List], then press OK.

Adjust the following items.

Use ▲/▼ to select the channel you want to remove, then

press OK.

Autoprogram

If you switch wires (e.g. between antenna and CATV) or if you

move the unit to a different area after the initial setting, or if

you restore the DTV channels you deleted, it is recommended

to use Autoprogram to perform a new channel search.

DTV

11.1

11.2

11.3

Picture

Sound

Channel

Features

Language

DVD

Highlight channels for

Ch Up / Down key selection.

Use ▲/▼ to select [Autoprogram], then press OK.

Use ▲/▼ to select an appropriate option, then press OK.

BACK

Ch Select

Watch/Skip

Back

• The channel display for the removed channel darkens.

You will not be able to select the channel again using

CH+/−.

• To reactivate a removed channel, use ▲/▼ and press

OK.The registered channels are highlighted.

• When you remove a main channel, its subchannels are

removed as well.

Back

Picture

Sound

Autoprogram will rescan all channels.

Auto programming may take more than 20

minutes to complete.

Antenna

Cable

Channel

Features

Language

DVD

Select your signal source.

Antenna

Cable

ANT.IN

Note

• The channel with the [DTV] indicated on the display is ATSC.

Otherwise the channel is NTSC.

• When connected toVHF/UHF antenna, select [Antenna].

• When connected to CATV, select [Cable].

• [Autoprogram] will begin.

Please wait while the system is scanning for channels.

Auto programming may take more than 20 minutes to complete.

75%

Digital channels

Analog channels

10 ch

6 ch

Exit

• When the scanning and memorizing are completed, the

lowest memorized channel will be displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Add Channels

Features

This function lets you add the off the air along NTSC or analog

Cable channels that were not added by the autoprogram due

to reception conditions at the initial setting.

Use ▲/▼ to select the item you want to adjust, then press

OK.

Use ▲/▼ to select [Add Channels], then press OK.

Use the Number buttons to enter the number of the

channel you want to add, then press OK.

Closed Caption

Child Lock

Picture

Sound

Channel

Features

Language

DVD

PC Settings

fun-Link (HDMI CEC)

Energy Saving Mode

Location

Home

Current Software Info

Add channels

Picture

Sound

For analog channels, select a

channel to be added using

number keys.

Channel

Features

Language

DVD

[PC Settings] will only display for 22MD311B, 19MD311B or

19MD301B.

For digital channels, you must

perform Autoprogram function.

Adjust the following items.

BACK

Ch Change

Back

Closed Caption

You can view closed captioning (CC) forTV programs,

movies and news. Closed caption refers to text of dialog or

descriptions displayed on-screen.

Note

• If setup completes successfully, [Added to the channel list.] is

displayed.

• If external input is used, it is not possible to register the channel

and [Unavailable] will be displayed on theTV screen.

• By using CH+/−, you can select the memorized channels only.

Use ▲/▼ to select [Closed Caption], then press OK.

See the following description for setting each item.

Caption Service

Digital Caption Service

Caption Style

Picture

Sound

Antenna Conﬁrmation

ATSC

Channel

Features

Language

DVD

This function lets you check the digital signal strength of each

channel.

Use ▲/▼ to select [Antenna], then press OK.

Use the Number buttons or CH+/− to select the channel

for which you want to check the digital signal strength.

A. Caption Service

11.1

Use ▲/▼ to select [Caption Service], then press OK.

Use ▲/▼ to select the desired closed caption, then press

OK.

Back

Picture

Sound

Off

Select if you do not want caption service.

The primary caption and text services.The

Channel

Features

Language

DVD

captioning or text is displayed in the same language

CC-1 andT-1 as the program’s dialog (up to 4 lines of script on the

TV screen, where it does not obstruct relevant parts

of the picture).

Current 50 Max

Serve as the preferred data channels.

CC-3 andT-3 The captioning or text is often a secondary

language.

Ch Change

Rarely available and broadcasters use them only in

CC-2, CC-4,

Note

special conditions, such as when [CC-1] and [CC-3]

T-2 andT-4

or [T-1] and [T-3] are not available.

• If the channel is set to analog channel or external input, you

cannot conﬁrm the antenna condition.

• There are 3 display modes according to programs:

Paint-on

mode

Displays input characters on theTV screen

immediately.

Once characters are stored in memory, they are

displayed all at once.

Pop-on mode

Displays the characters continuously by scrolling

(max. 4 lines).

Roll-up mode

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Note

B. Digital Captiioon SSeerrvice

• Closed caption will not be displayed when you are using an HDMI

connection.

ATSC

• To show the closed caption on yourTV screen, broadcast signal

must contain the closed caption data.

• Not allTV programs and commercials have the closed caption or

all types of the closed caption.

• Captions and texts may not exactly match theTV voice.

• Changing channels may delay the closed caption for a few seconds.

• Adjusting or muting the volume may delay the closed caption for

a few seconds.

• Abbreviations, symbols and other grammatical shortcuts may be

used in order to keep pace with the on-screen action.This is not

a malfunction.

• The caption or text characters will not be displayed while the

main menu or functions display is shown.

• If a black box appears on theTV screen, this means that the closed

caption is set to the text mode.To clear the box, select [CC-1],

[CC-2], [CC-3], [CC-4] or [Off].

• If the unit receives poor quality television signals, the captions may

contain errors, or there might be no captions at all. Some possible

causes of poor quality signals are:

In addition to the basic closed caption, DTV has its own closed

caption called digital caption service. Use this menu to change

the settings for digital caption service.

Use ▲/▼ to select [Digital Caption Service], then press

OK.

Use ▲/▼ to select the desired digital caption service, then

press OK.

Select if you do not want digital caption

service.

Off

Select one of these before changing any

CS-1 to CS-6

other item in [Closed Caption] menu.

Choose [CS-1] under normal circumstances.

Note

- Automobile ignition noise

- Electric motor noise

- Weak signal reception

• [Digital Caption Service] that you can switch differs depending on

the broadcast description.

- Multiplex signal reception (ghosts or screen ﬂutter)

- Data dropout and Pixelation (for DTV only)

• The unit retains the closed caption setting if the power fails.

• When the unit receives special effects playback signal (e.g. Search,

Slow and Still) from aVCR’s video output channel (ch3 or ch4),

the unit may not display the correct caption or text.

C. Caption Style

ATSC

You can change the caption style such as font, color or size, etc.

Use ▲/▼ to select [Caption Style], then press OK.

Child Lock

Child lock reads the ratings for programs, then denies access

to the programs which exceed the rating level you set.With

this function, you can block certain programs inappropriate

for children and any channels or external input modes can be

invisible.

Use ▲/▼ to select [User Setting], then press OK.

Use ▲/▼ to select [On], then press OK.

Use ▲/▼ to select an item, then press OK. Then use

▲/▼ to select the desired setting and press OK.

Picture display

Use ▲/▼ to select [Child Lock], then press OK.

So, you must bee Philip. Hi!

I’m pleaseed to meet you.

Closed Caption

Child Lock

Picture

Sound

Channel

Features

Language

DVD

PC Settings

Edge

fun-Link (HDMI CEC)

Energy Saving Mode

Location

(Edge Color and EdgeType)

Font

Home

(Font Style, Font Size, Font Color and Font Opacity or

Transparency)

Current Software Info

Background

(Background Color and Backgroouunndd OOppaacciittyy oorr

Transparency)

[PC Settings] will only display for 22MD311B, 19MD311B or

19MD301B.

• Review your setting choice made below by looking in

the upper right corner of the displayed setting box (not

all selections show the differences selected).

Font Style

Font Size

Closed captioning font style, size,

color and opacity can be changed.

Font

Font Color

Font

Opacity

Background

Color

Background

Opacity

Background color and opacity of the

displayed caption can be switched.

Background

Edge Color

EdgeType

Edge color and type of the displayed

caption can be switched.

Edge

Download from Www.Somanuals.com. All Manuals Search And Download.

B. Setting US Movie ratings

US Movie ratings lock is the rating system created by MPAA.

Use the Number buttons to enter the 4-digit number for

your PIN code.

Features

Enter PIN.

Language

Use ▲/▼ to select [US Movie Ratings Lock], then press

OK.

• When you have not set up your PIN code,

enter 0, 0, 0, 0.

Use ▲/▼ to select the desired rating, then press OK

repeatedly to switch between [View] and [Block].

• When the PIN code is correct, [Child Lock] menu is

displayed.

• See the following description for setting each item.

Picture

Sound

NC-17

Channel Lock

Picture

Sound

Channel

Features

Language

DVD

US Movie Ratings Lock

US TV Ratings Lock

Canadian English Rating

Canadian French Rating

Region Ratings Lock

Clear Region Ratings Lock

Change PIN

PG-13

Channel

Features

Language

DVD

BACK

Select

View/Block

Back

Rating

Category

FantasyViolence

Rating

Adjust the following items.

TV-Y7

Violence

TV-MA

TV-14

TV-PG

Auto Adjustment

Use ▲/▼ to select [Adjust], then press OK.

Sexual Situation

Coarse Language

Suggestive Dialog

TV-14,TV-PG

Picture

Cancel

Adjust

Note

Sound

To automatically synchronize

the phase and clock

on the TV and PC.

• Blocked sub rating will appear beside the main rating category in

[USTV Ratings Lock] menu.

• You cannot block a sub rating (D, L, S orV) if the main rating is set

to [View].

Channel

Features

Language

DVD

• Changing the category to [Block] or [View] automatically changes

all its sub ratings to the same ([Block] or [View]).

D. Change PIN

Although the default PIN code (0000) is supplied with the unit,

you can set your own PIN code.

• The horizontal/vertical position, clock and phase of the

PC screen are automatically adjusted.

Horizontal Position,Vertical Position

Use ◄/► to adjust.

Use ▲/▼ to select [Change PIN], then press OK.

Cursor ◄

Cursor ►

Press the Number buttons to enter the new 4-digit PIN

code.

Horizontal

Position

to move PC screen left to move PC screen right

• Enter PIN code again in [Confirm PIN.] entry field.

to move PC screen

to move PC screen up

down

Vertical

Position

Picture

Sound

Clock, Phase

Use ◄/► to adjust [Clock] setting to stabilize

the PC screen and [Phase] setting to improve the clarity

of the PC screen.

Enter PIN.

Channel

Features

Language

DVD

Confirm PIN.

Cursor ◄

Cursor ►

Clock

Phase

to decrease setting

value

to increase setting

value

BACK

PIN Code

Back

Note

• Make sure new PIN code and conﬁrm PIN code must be exactly

the same. If they are different, the space is cleared for reentering.

• Your PIN code will be erased and returns to the default PIN code

(0000) when a power failure occurs.

• If you forget the PIN code, unplug the AC power cord then wait

for 10 seconds to plug the AC power cord in again.

• You may not obtain an appropriate screen with

[Auto Adjustment] for some signals. In this case, adjust the settings

manually.

• Adjust [Phase] setting after [Clock] setting has been properly

adjusted.

The unit will restore the PIN code to 0000 as the factory default.

Download from Www.Somanuals.com. All Manuals Search And Download.

Device List

fun-Link (HDMI CEC)

This function lets you see the product model number or name

of connected devices.

This function allows you to operate the linked functions

between our brand devices with a fun-Link feature and this

unit connecting through an HDMI cable.

Use ▲/▼ to select the desired HDMI device listed on theTV

screen, then press OK.

Use ▲/▼ to select [fun-Link (HDMI CEC)], then press

OK.

Picture

HDMI1

HDMI2

NB620SL2

MBP5230

Sound

Channel

Features

Language

DVD

fun-Link Control

Auto Device Off

Auto TV On

Picture

Sound

Channel

Features

Language

DVD

Device List

BACK

Select

Input Change

Back

Energy Saving Mode

You can set whether the power consumption is saved or not.

Use ▲/▼ to select the desired setting, then press OK.

Adjust the following items.

Use ▲/▼ to select [Energy Saving Mode], then press OK.

fun-Link Control

Set the fun-Link [On] or [Off].

The following additional settings will be grayed out when you

set to [Off].

Use ▲/▼ to select the desired mode, then press OK.

Reduces the power consumption.

The power consumption may possibly exceed

the limited requirement of the ENERGY STAR^®

qualification.

Off

Use ▲/▼ to select the desired setting, then press OK.

Selects if you have connected an external device

that is compatible with the fun-Link function.

Note

• You must set [Home] in [Location]. p.26

Otherwise, the settings you adjusted will not be memorized after

the unit goes into standby mode.

➠

Off

Disables all fun-Link.

Auto Device Off

You can set your device to turn off by interlocking from this

unit’s power.

Location

When you select [Retail] store, the power consumption may

possibly exceed the limited requirement of the

ENERGY STAR^®qualiﬁcation.

Use ▲/▼ to select the desired setting, then press OK.

Your connected fun-Link device turns off

automatically when the unit goes into standby

mode.

Your connected fun-Link device stays on even if

the unit goes into standby mode.

Off

Use ▲/▼ to select [Location], then press OK.

Use ▲/▼ to select the desired location, then press OK.

AutoTV On

The unit will be set up with predefined setting

for retail displays. In this setting, the power

consumption may possibly exceed the limited

This unit will turn on detected when the power on signal is

sent from your connected fun-Link device.

Retail

requirement of the ENERGY STAR^®qualification.

This setting is ENERGY STAR^®qualification.

The unit is set to maximize the energy efficiency

for home setting and it can be adjusted through a

choice of picture and sound quality according to

your preference.

Use ▲/▼ to select the desired setting, then press OK.

This unit turns on automatically when you turn on

your connected fun-Link device.

Home

This unit stays the standby mode even if you turn

on your connected fun-Link device.

Off

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Current Software Info

This function shows what version of the software currently

DVD

used.

Settings are only effective when the unit is in DVD mode

and any discs should not be played back.

Use ▲/▼ to select [Current Software Info], then press

OK.

Use ◄/►to select a desired setting and an item, then press

OK to determine the setting.

Conﬁrm the version of the software currently used.

Back

Picture

Sound

Release Version:

Channel

Features

Language

DVD

LANGUAGE

XXXXXXX_XXX_X_XXXX

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

ENTER/OK

Language

When the setting is completed, press MENU to exit.

Use ▲/▼ to select [English], [Español] or [Français], then

press OK.

DVD Language Setting

You can change the desired language when playing back the disc.

Picture

Use ▲/▼ to select the item you want to adjust, then press

OK.

Select your menu language.

English

Español

Français

Sound

Channel

Features

Language

DVD

Seleccione el idioma para el menú.

Sélectionnez la langue du menu.

Adjust the following items.

(Default: ORIGINAL)

(Default: OFF)

AUDIO *1, *2

Select the desired audio language.

SUBTITLE *1, *2

Select the desired subtitle language.

Note

(Default: ENGLISH)

DISC MENU *1

• If you need the English menus instead of the Spanish or French

menus, press MENU. Use ▲/▼ to select [Idioma] or [Langue],

then press OK.

Use ▲/▼ to select [English], then press OK.

Press MENU to exit the main menu.

Select the desired language in DVD menu.

Note

• To change the on-screen language, call up [Language] from the

main menu and set the desired language. [Language]

p.27

➠

• Language options are not available with some discs.

• If [OTHER] is selected in [AUDIO], [SUBTITLE] or

[DISC MENU] menu, press 4-digit number to enter the code for

the desired language. [Language Code List]. p.29

➠

• Only the languages supported by the disc can be selected.

• Language setting for Audio and Subtitle are not available with

some discs.

Use MODE to select subtitles available on the DVD.

Use SAP/AUDIO to select audio available on the DVD.

• If the DVD’s default settings for audio and subtitle are the same

language, the subtitles may not show unless you turn them on.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Audio Setting

Choose the appropriate audio settings for your equipment. It only

affects during the playback of DVD.

Parental Setting

Parental setting prevents your children from viewing inappropriate

materials. (password protected.) Playback will stop if the ratings

exceed the levels you set.

Use ▲/▼ to select the desired item, then press OK.

Use the Number buttons to enter the 4-digit password for

your password, then press OK.

AUDIO

PARENTAL

DRC

DOWN SAMPLING ON

DOLBY DIGITAL BITSTREAM

PASSWORD

Please enter a 4-digit password.

ENTER/OK

Adjust the following items.

• If you have set password already, use

the Number buttons to enter the current 4-digit

password.

• You cannot use the default password (4737) to play

back a DVD.

(Default: ON)

DRC (dynamic range control)

This function is available only on the discs which are recorded

in the Dolby Digital format.

Compress the range between soft and loud

sounds.

Use ▲/▼ to select the [PARENTAL LEVEL], then press

OK.

OFF

No effects (original sound).

(Default: ON)

DOWN SAMPLING

This function is available only on digital outputting of a disc

recorded in 96kHz.

Use ▲/▼ to select the desired item, then press OK.

PARENTAL LEVEL

ALL

All parental locks are cancelled.

When outputting in 48kHz.

All ratings (adult/general/children) can be

played back.

8 [ADULT]

OFF

When outputting the original sound.

Only DVD intended for general use and

children can be played back.

Only DVD intended for children can be played

back.

7 [NC-17]-2 [G]

1 [KID SAFE]

Note

• When playing back a 96 kHz disc with the copyright protection

or when [Virtual Surround] is set to [1] or [2], the sound will be

down sampled at 48 kHz even if the [DOWN SAMPLING] is set

To change the password

to [OFF]. [Virtual Surround].

p.35

➠

At step 2, use ▲/▼ to select [PASSWORD CHANGE]

then press OK.

(Default: BITSTREAM)

DOLBY DIGITAL

Set to [BITSTREAM] when this unit is connected to a Dolby

Digital decoder.

Use the Number buttons to enter the new 4-digit

password.

BITSTREAM Outputs Dolby Digital signals.

Note

PCM

• DVD-video may not respond to parental lock settings. Make sure

this function works with your DVD-video.

Converts the Dolby Digital into PCM. (2 channel)

• Record the password in case you forget it.

• If you forget the password, press 4, 7, 3, 7, then enter your new

password. Password will be cleared and parental levels will be set

to [ALL].

• A power failure will not erase your password.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Language Code List

Others

You can change the other functions.

Language

Code

Language

Code

Lithuanian

Macedonian

Malagasy

Malay

5866

5957

5953

5965

5958

5966

5955

5964

5961

5960

6047

6051

6061

A-B

Use ▲/▼ to select the desired item, then press OK.

Abkhazian

Afar

Afrikaans

Albanian

Amharic

Arabic

4748

4747

4752

6563

4759

4764

5471

4765

4771

4772

4847

5167

4860

5072

4854

4855

4864

4853

5971

4851

Malayalam

Maltese

Maori

Marathi

OTHERS

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Moldavian

Mongolian

Nauru

ANGLE ICON

STILL MODE

AUTO

AUTO POWER OFF ON

Nepali

Norwegian [NOR]

O-R

Basque

ENTER/OK

Bengali;Bangla

Bhutani

Occitan

Oriya

6149

6164

6159

6247

6265

5247

6258

6266

6367

6459

6461

6467

Bihari

Bislama

Oromo(Afan)

Panjabi

Breton

Bulgarian

Burmese

Byelorussian

Pashto;Pushto

Persian

Adjust the following items.

Polish [POL]

Portuguese [POR]

Quechua

Rhaeto-Romance

Romanian [RUM]

Russian [RUS]

(Default: ON)

ANGLE ICON

Set to [ON] to show the angle icon when multiple camera

angles are available during DVD playback.

C-E

Cambodian

Catalan

5759

4947

7254

4961

5464

4965

5047

6058

5160

5161

5166

Chinese [CHI]

Corsican

Croatian

Czech [CZE]

(Default:AUTO)

STILL MODE

Set the picture quality in the still mode.

If you select [AUTO], it automatically selects the best

resolution setting ([FRAME] or [FIELD]) based on the date

characteristics of the pictures.

Samoan

Sangho

Sanskrit

Scots Gaelic

Serbian

6559

6553

6547

5350

6564

6554

6566

6660

6560

6550

6555

6565

6557

6558

6561

5165

6567

6569

6568

Danish [DAN]

Dutch [DUT]

English [ENG]

Esperanto

Estonian

Serbo-Croatian

Sesotho

Setswana

Shona

F-H

FIELD

The picture in the still mode will be stabilized.

Faroese

Fiji

5261

5256

5255

5264

5271

5358

5747

5051

5158

5758

5360

5367

5447

5569

5455

5467

FRAME

The picture in the still mode will be highly defined.

Sindhi

Finnish [FIN]

French [FRE]

Frisian

Singhalese

Siswat

(Default: ON)

AUTO POWER OFF

Set to [ON] if there is no operation for 20 minutes, the unit

goes into standby mode.

Slovak

Galician

Slovenian

Somali

Georgian

German [GER]

Greek [GRE]

Greenlandic

Guarani

Spanish [SPA]

Sundanese

Swahili

Swedish [SWE]

Gujarati

Reset to the Default Setting

You can reset all the settings except for the parental setting and

on-screen menu language.

Hausa

Hebrew

Tagalog

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

Hindi

Tajik

Hungarian [HUN]

I-K

Tamil

Tatar

Telugu

Icelandic [ICE]

Indonesian

Interlingua

Interlingue

Inupiak

5565

5560

5547

5551

5557

5347

5566

5647

5669

5760

5765

5757

6469

5771

6460

5761

5767

Use ▲/▼ to select [YES], then press OK.

Thai

Tibetan

Tigrinya

Tonga

Tsonga

Irish [IRI]

Italian [ITA]

Japanese [JPN]

Javanese

INITIALIZE

Turkish [TUR]

Turkmen

Twi

Initialize?

YES

Kannada

U-Z

Kashmiri

Ukrainian

Urdu

Uzbek

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

Kazakh

Kinyarwanda

Kirghiz

ENTER/OK

Vietnamese

Volapuk

Welsh

Kirundi

Korean [KOR]

Kurdish

Wolof

Xhosa

L-N

Yiddish

Laothian

Latin

Latvian;Lettish

Lingala

5861

5847

5868

5860

Note

Yoruba

• When you want to cancel the initialization, select [NO], then press

Zulu

OK.

Note

• If you choose a language that has a 3-letter abbreviation, the code

will be displayed every time you change the audio or subtitle

language setting above. If you choose any other language, [---] will

be displayed instead. (3-letter abbreviation is written in bracket.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Unplayable Media

NEVER play back the following discs. Otherwise, malfunction

may result!

OPERATING DVD

•

3 inches (8 cm) disc

DVD-RAM

DVD-audio

CD-i

Photo CD

Video CD

DVD with region codes other than 1 or ALL

DTS-CD

DVD-ROM for personal computers

CD-ROM for personal computers

The discs with labels, scratches, stains, blemishes, etc.

HD DVD

Blu-ray Disc

DVD or CD contains MP3/JPEG ﬁles

KODAK Picture CD

Playable Media

Recorded

MediaType

Logo

Media Size

Signal

DVD-VIDEO

digital video

(MPEG2)

DVD-RW

On the following disc, the sound MAY NOT be heard.

Super audio CD

DVD-R

CD-DA

CD-RW

•

5 inches

(12 cm)

Any other discs without compatibility indications

Note

• Unﬁnalized discs cannot be played back.

• For DVD-RW/-R, discs recorded in theVR (video recording)

format cannot be played back. Only the ﬁnalized video format

discs can be played back.

• Some discs cannot be played back because of incompatible

recording conditions, characteristics of the recorder or special

properties of discs.

digital audio

• Only the sound recorded on the normal CD layer can be

delivered.The sound recorded on the high density super audio

CD layer cannot be delivered.

• Do not use a single CD adaptor which makes 3 inches (8 cm) to

5 inches (12 cm) disc.

• You can play back discs with the marks listed in [Playable Media].

If you use non-standardized discs, this unit may not play them back

or the sound and video quality will be compromised.

• If the recorded portion of the disc is too small (less than 2.17

inches (55 mm) across), it may not play back properly.

CD-R

Region Codes

This unit has been designed to play back DVD with

region 1. DVD must be labeled for ALL regions or

for region 1 in order to play back on the unit.You

cannot play back DVD that are labeled for other

regions. Look for the symbols on your DVD. If these

region symbols are not on your DVD, you cannot

play back the DVD in this unit.

The number inside the globe refers to region of the world.

A DVD labeled for a speciﬁc region can only be played back

on the unit with the same region code.

Color Systems

DVD is recorded in different color systems throughout the

world.The most common color system is NTSC (which is used

primarily in the United States and Canada).

This unit uses NTSC, so DVD you play back must be recorded

in the NTSC system.You cannot play back DVD recorded in

PAL color systems.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Disc Menu

DVD

These operations are accessible by remote control. Some

may also be accessible by controls on the main unit.

Some discs contain disc menus which describe the contents of the

disc or allow you to customize disc playback, or title menu which

lists the titles available on the DVD.

Playback

Before you begin:

To display the DVD menu, press DISC MENU and use

▲/▼/◄/► to select an item, then press OK (or PLAY B).

To display the top menu, press TITLE and use

Turn on the ampliﬁer and any other equipment which is

connected to this unit. Make sure the external audio receiver (not

included) are set to the correct channel.

▲/▼/◄/► to select an item, then press OK (or PLAY B).

Note

Press to turn on the unit.

• Menu operations may vary depending on the disc.

Refer to the manual accompanying the disc for more details.

Insert a disc with label facing forward.

<32MD311B/32MD301B>

Resume Playback

label

Press STOP C during playback. Resume message will appear

on theTV screen.

Press PLAY B. Playback will resume from the point at which

playback was stopped.

<26MD311B/26MD301B/22MD311B/19MD311B/19MD301B>

Note

•

To cancel resume, press STOP C one more time in the stop mode.

On some discs, STOP C will not work while the resume message

appears. Please wait until the message disappears.

label

•

The resume information will be kept even when the unit goes

into standby mode. However, ejecting the disc will cancel the

resume feature. Playback will start at the beginning the next time

you insert the disc.

CAUTION

• Do not put coins or

foreign objects into

the disc loading slot.

• In case the DVD was recorded on both sides, make

sure the label of the side you want to play back is facing

forward.

Paused and Step-by-step Playback

Press PAUSE F during playback.

The unit switches to the DVD mode when the unit was in

TV mode and detects the type of disc.

• Press PLAY B if the unit does not go to the DVD mode.

• Playback will be paused and sound will be muted.

DVD

The unit starts playback.

• If playback does not start automatically, press PLAY B

again.

Each time you press PAUSE F in the pause mode, the disc

goes forward one frame at a time.

To continue playback, press PLAY B.

Press STOP C to stop playback temporarily.

Note

• If playback remains stopped for 20 minutes, the unit will

go into standby mode automatically when

[AUTO POWER OFF] is set to [ON].

• Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures

in the pause mode are blurred.

p.29

➠

Press JECT A to eject the disc.

Fast Forward/Fast Reverse

Press FWD D or REV E repeatedly during playback to

Note

• [

] may appear at the top-right on theTV screen when the

operation is prohibited by the disc or this unit.

• Some DVD may start playback from title 2 or 3 due to speciﬁc

programs.

select the desired forward or reverse speed.

• During the playback of a 2-layered disc, pictures may stop for a

moment.This happens while the 1st layer is being switched to the

2nd layer.This is not a malfunction.

• When you cannot remove the disc, you may try either following

operations.

- Press and hold EJECT A on the unit for more than 5 seconds.

- Unplug the AC power cord and plug it in again, then press

EJECT A.

It will take about 10 seconds to eject the disc, while that the unit

will not respond to any key commands.

To continue playback, press PLAY B.

Note

• Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures

in the fast playback mode are blurred.

• Fast forward/fast reverse speed varies with disc.Approximate

speed is 1(2x), 2(8x), 3(20x), 4(50x) and 5(100x) on DVD and

1(2x), 2(8x) and 3(30x) on audio CD.

• For DVD, sound will be muted during this function.

• For audio CD, sound will be intermittent during the search.

p.29

➠

Download from Www.Somanuals.com. All Manuals Search And Download.

Note

Slow Forward/Slow Reverse

• Chapter, title or track search can only be performed during

playback or when the unit has kept the resume information. It

cannot be performed in the stop mode.

• The total number of chapters/titles/tracks in your disc; with

less than 10 chapters/titles/tracks, press the chapter/title/track

number directly.To play a double-digit chapter/title/track, press

the chapter/title/track number.

DVD

Press FWD D or REV E repeatedly during the paused

mode to select the desired forward or reverse speed.

To continue playback, press PLAY B.

• Track search is not available for programmed or random playback.

Note

• Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures

in the slow playback mode are blurred.

• Slow forward/slow reverse speed varies with disc.Approximate

speed is 1(1/16x), 2(1/8x) and 3(1/2x).

p.29

Using SKIP H/G

➠

During playback, press SKIP H/G repeatedly until a

desired chapter, title or track will be selected.

• The sound will be muted during this function.

current chapter/track

(CH) (TR)

CH/TR 1 CH/TR 2 CH/TR 3 CH/TR 4

current title

(TT)

TT 1 TT 2 TT 3 TT 4

Zoom

DVD

[SKIP H]

[SKIP G]

[SKIP H]

[SKIP G]

The zoom function allows you to enlarge the video image and

to pan through the enlarged image.

Playback will start automatically from the chapter, title or

track you selected.

Note

During playback, press MODE repeatedly until

] appears.

• SKIP H/G are not available when playback is stopped.

[

• The picture becomes twice as large.

Press OK repeatedly to change the zoom factor, [2x] or

[4x].

Time Search

You can select the desired time which the disc is played back

from.

Once a desired zoom factor is set, use ▲/▼/◄/► to slide

the zoomed picture across theTV screen.

To exit zoom, repeat steps 1 to 2 above and press OK

repeatedly until [OFF] appears.

During playback, press MODE repeatedly until

]/[ ] appears.

[

Use ▲/▼ repeatedly until [

] appears.

Note

• The gray box with an inner blue box that shows during zoomed

playback is the position guide indicates the position of the zoomed

image within the overall image.

Press the Number buttons to select your desired time

lapse within 60 seconds.

Position guide stays on theTV screen until you press OK.

Press OK one more time to recall the position guide when

disappears.

• Zoom function does not work while the disc menu is displayed.

• 4x zoom is not available on some discs.

Note

Playback will start automatically from the time you selected.

• When there is no need to enter a number, [0] appears

automatically. For example, [0: 0_: _ _] appears in the time search

menu if the total time of the title or track is less than 10 minutes.

• Press CLEAR to erase the incorrect input at step 3.

• Time search can only be performed during playback or when the

unit has kept the resume information.

• Zoom function is also available during pause mode.

It cannot be performed in the stop mode.

Search Functions

Chapter/Title /Track Search

Direct Search

You can select chapters, titles or tracks on the disc.

Press the Number buttons to select your desired chapter, title

or track.

During playback, press MODE repeatedly until

]/[ ] appears.

• If you want to perform the title search, use

▲/▼ repeatedly until [ ] appears.

Note

[

• To select a single-digit chapter, title or track number, press the

number directly.

• To select double digit chapter, title or track number:

- If the disc contains more than 9 and less than 100 chapter, title

or track, press +10 ﬁrst, then enter the double digit chapter, title

or track number.

Press the Number buttons to select your desired chapter,

title or track within 60 seconds.

To play back a single-digit chapter, title or track when

there are more than 10 chapters, titles or tracks, press

OK after entering the chapter, title or track number.

(e.g., for track 26, press +10, 2 and 6)

Playback will start automatically from the chapter, title or

track you selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Repeat Playback

Random Playback

Repeat function is available only during playback.

This function shufﬂes the playing order of tracks instead of

playback in the sequence.

During playback, press MODE repeatedly until [

appears.

]

Press ▲/▼ to change the repeat mode.

In stop mode, press MODE repeatedly until [RANDOM]

menu appears.

DVD

OFF

CHAPTER

TITLE

repeat off

current chapter repeat

current title repeat

Press PLAY B to start random playback.

Note

• To repeat the current track in the random mode, follow the steps

1 and 2 in [Repeat Playback] and select [ TRACK]. p.33

• To repeat the entire random selections, follow the steps 1 and 2 in

[Repeat Playback] and select [ ALL]. p.33

➠

OFF

TRACK

ALL

repeat off

current track repeat

entire disc repeat

➠

Press BACK to exit.

Programmed Playback

Repeat A-B Playback

You may determine the order in which tracks will play back.

You can repeat playback between A and B on a disc.

In stop mode, press MODE repeatedly until [PROGRAM]

menu appears.

During playback, press MODE repeatedly until

[

] appears.

Use ▲/▼ to select a desired track, then press OK to

store.

• Additional tracks may be on other screens. Use ▲/▼

to go on to the next/previous pages.

• Repeat this step until you have selected all the tracks

you wish to play back in the program.

• Up to 99 tracks can be ordered.

Press OK at your desired starting point (A).

Press OK at your desired ending point (B).

• Point B should be in the same title or track as point A.

• Within a few seconds, the section A-B will begin to play

back repeatedly.

• If 8 or more tracks were in a program, use

SKIP H/G to see all the tracks.

To cancel repeat A-B playback, press MODE repeatedly

until [

] appears.

Press OK so [OFF] appears.

Press PLAY B to start programmed playback.

Note

• Repeat setting (except [ALL]) will be cleared when moving to

another title or chapter, track.

• Press CLEAR to erase the last track in the program if you make

an error.

• To erase all programmed tracks at once, select [ALL CLEAR] and

• During programmed playback, repeat setting will be effective for

the tracks in the program.

• Repeat playback or repeat A-B playback may not available with

some discs.

• Repeat A-B playback does not function during other repeat mode.

• To cancel point A, press CLEAR at step 2 in

[Repeat A-B Playback].

press OK at step 2.

• While a program is being played back, STOP C works as follows:

- Pressing STOP C once:The track will be in the resume standby

mode. Next time you press PLAY B, the playback will resume

from the point where it is stopped in the programmed playback.

- Pressing STOP C twice: Resume mode will be canceled. Next

time you press PLAY B, playback will restart from the ﬁrst track

in the original order. However, your programmed playback can

be restarted when you follow the above steps. (Your programs

are still stored until either the disc is ejected or the unit goes into

standby mode.)

• Stopping playback will cancel repeat A-B playback.

- On some discs, STOP C will not work while the resume message

appears. Please wait until the message disappears.

• To repeat the current track in the program, follow the steps 1 and

2 in [Repeat Playback] and select [TRACK].

p.33

➠

• To repeat the entire program, follow the steps 1 and 2 in [Repeat

Playback] and select [ALL]. p.33

➠

• Ejecting the disc or the unit goes into standby mode will erase the

program.

• You cannot use the Number buttons to select another track

during programmed playback. Use SKIP H/G to select other

tracks in the program.

• You cannot combine random playback with programmed playback.

• You cannot alter a programmed order during playback.

• You can start programmed playback only while in [PROGRAM]

menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

On-screen Display

Special Settings

Subtitle Language

DVD

You can check the information about the current disc by

pressing INFO on the remote control.

This unit allows you to select a subtitle language (if available)

during DVD playback.

remaining time of the current

chapter

DVD

appears only when multi-

angle is available on the DVD

current playback status

During playback, press MODE repeatedly until

] appears.

[

11/16 0:00:00 - 0:03:30

Use ▲/▼ repeatedly until your desired language appears.

elapsed time of the current

chapter

(

)

1.ENG / 6 SUBTITLE

subtitles can be varied on the

displayed number

CH (Chapter):

current chapter number /

total chapters

current subtitles language

Each time you press ▲/▼, the subtitle language changes

as follows.

1/3 0:00:00 - 1:23:45

remaining time of the current title

elapsed time of the current title

TT (Title):

OFF

ENG

SPA

no subtitles

English audio

Spanish audio

current title number/total titles

layer number, appears only when

playing a 2-layered disc

L0 : Layer 0 is playing

L1 : Layer 1 is playing

Press BACK to exit.

Note

• To cancel the subtitle, select [OFF] at step 2.

current repeat setting appears only

when the repeat setting is active

C : Chapter repeat

• If your language is not shown after pressing

▲/▼ several times, the disc may not have that language. However,

some discs allow you to change subtitle languages setting in the

disc menu. (Operation varies depending on the disc, so refer to

the manual along with the disc.)

T : Title repeat

B : A-B repeat

• When [NOT AVAILABLE] appears on theTV screen, it means no

subtitle is recorded on the scene.

• If you choose a language that has 3-letter-language code, the code

will be displayed every time you change the subtitle language

setting. If you choose any other languages, [---] will be displayed

bit rate indication for the amount

of audio and video data currently

being read

instead.

p.29

➠

elapsed time of the current track

remaining time of the current

track

• Ejecting the disc will cancel your subtitle setting.

Audio Language

current playback status

4/12 0:03:21 - 0:02:15

DVD

TR (Track):

current track number/total tracks

This unit allows you to select an audio language (if multiple

languages are available) during DVD playback.

ALL:

current track number/total tracks

4/12 0:13:45 - 0:45:40

During playback, press SAP/AUDIO repeatedly until the

desired language appears.

current repeat setting appears

only when the repeat setting is

active

T : Track repeat

A : All tracks repeat

1.ENG Dolby D 3/2.1ch 48k/3

audio can be varied on the

B : A-B repeat

displayed number

remaining time of the entire disc

elapsed time of the entire disc

current audio language

Each time you press SAP/AUDIO, the audio language

changes as follows.

ENG

SPA

FRE

English audio

Spanish audio

French audio

Note

• When you are playing back an audio CD in program or random

mode, [

instead of

PROGRAM] (or [

RANDOM]) will be displayed

Download from Www.Somanuals.com. All Manuals Search And Download.

English

STEREO

L-ch

R-ch

Stereo sound with left and right channels.

Left channel sound only.

Right channel sound only.

Note

• Some discs will only allow you to change the audio setting from

the disc menu. Refer to the manual accompanying the discs for

details.

• If your language is not shown after pressing SAP/AUDIO several

times, the disc may not have that language.

Note

• Virtual surround cannot be changed when the sound mode is set

to either [L-ch] or [R-ch].

However, some discs allow you to change multiple audio languages

setting in the disc menu. (Operation varies depending on the disc,

so refer to the manual along with the disc.)

• When [NOT AVAILABLE] appears on theTV screen, it means

audio language is not available.

Virtuaal Surround

You can enjoy virtual surround on your 2 channel stereo

system.

Camera Angles

DVD

During playback, press MODE repeatedly until [

appears.

]

Some DVD may contain scenes which have been shot

simultaneously from various angles.You can change the camera

angle if [ ] appears on the screen. If [ANGLE ICON] is set

Press ▲/▼ to select the sound level.

Natural effect.

to [OFF] in [OTHERS] menu, [ ] will not appear.

p.29

➠

Emphasized effect.

OFF

No effects (original sound).

During playback, press MODE repeatedly until [

appears.

]

Press BACK to exit.

Use ▲/▼ repeatedly until your desired camera angle

appears.

Note

• The setting will be kept even if the unit is turned off.

• For audio CD, virtual surround will not be effective if the sound

(

)

1 / 8 ANGLE

mode is set to something other than [STEREO].

angles can be varied on the

displayed number

[Stereo Sound Mode].

p.35

➠

• Turn down the level or select [OFF] if the sound is distorted.

Press BACK to exit.

Marker Setup

Black Level Setttiinngg

DVD

This feature allows you to assign a speciﬁc point on a disc to

be called back later.

Adjust the black level to make the dark areas of theTV picture

brighter.

To set a marker

During playback, press MODE repeatedly until

]/[ ] appears.

[

During playback, press MODE repeatedly until [

appears.

]

Use ▲/▼ repeatedly until marker search menu appears.

Use ◄/► to select an available marker within 60 seconds.

Press ▲/▼ to adjust the black level.

OFF

Makes the dark areas brighter.

When the playback reaches the point at which you want to

set a marker, press OK.

Shows the original picture as recorded.

• Marker is now set.

Note

Press BACK to exit.

To return to the marker later

• The setting will be kept even if the unit goes into standby mode.

Repeat steps 1-2 in [To set a marker]. Use ◄/► to select

the desired marker.

Stereo Sound Mode

Press OK at the desired marker to restart playback from

the speciﬁc point which you set.

This unit allows you to select a sound mode during CD

playback.

Note

• Marker search menu will disappear in about 60 seconds when

there is no input.

• You can mark up to 10 points.

• To clear a marker, select the marker to be cleared, and then press

CLEAR.

• Ejecting the disc or turning off the power will erase all markers.

During playback, press SAP/AUDIO repeatedly until the

desired sound mode appears.

Each time you press SAP/AUDIO, the sound mode

changes as follows.

• Selecting [

also erase all markers.

] at step 3 in the section [To set a marker] will

Download from Www.Somanuals.com. All Manuals Search And Download.

HDMI-DVI Connection

CONNECTING DEVICES

Use an HDMI-DVI conversion cable to connect the unit to

external video devices equipped with DVI output jack.

(Use HDMI 1 Input jack only and Audio L/R below HDMI 1

Input jack on rear of TV.)

No supplied cables are used with these connections:

32”

• Please purchase the necessary cables at your local store.

cable receiver or satellite box

with the DDVI output jack

Before you connect:

Be sure other device is connected properly before plugging in

the AC power cord.

STEREO

PCM

External Device Connection

audio cables

HDMI Connection

HDMI connection offers the highest picture quality.

HDMI (High-Deﬁnition Multimedia Interface) transports high deﬁnition

digital video and multi-channel digital audio through a single cable.

To HDMI 1 Input

jack only

32”

Blu-rayy/DVD recorder

with the HDMI output jack

HDMI-DVI conversion cable

HDMI-DVI

T I T L E

C H A P T E R 1 5

R E P E A T A - B

26”

conversion cable

To HDMI 1 Input

jack only

audio cables

HDMI cable

STEREO

PCM

cable receiver or satellite box

with thee DVI output jack

26”

HDMI cable

To HDMI 1 Input

22”/19” jack only

HDMI-DVI

conversion cable

audio cables

TITLE

CHAPTER 15

REPEAT A-B

Blu-ray//DVD recorder

with the HHDMI output jack

Note

• Use an HDMI cable with the HDMI logo (a certiﬁed HDMI cable).

High Speed HDMI cable is recommended for the better

compatibility.

For HDMI connection (use HDMI 1 or 2 Input jack)

• The unit accepts 480i, 480p, 720p, 1080i and 1080p 24/60 Hz of

video signals, and 32kHz, 44.1kHz and 48kHz of audio signals.

• This unit accepts 5.1 channel audio signal (Dolby Digital) and 2

channel audio signal (LPCM).

HDMI cable

• This unit accepts only signals in compliance with EIA861.

For HDMI-DVI connection

• The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.

• HDMI-DVI connection requires separate audio connections as well

and the audio signals are converted from digital to analog.

• DVI does not display 480i image which is not in compliance with

EIA/CEA-861/861B.

22”/19”

Download from Www.Somanuals.com. All Manuals Search And Download.

English

ComponentVideo Connection

ComponentVideo connection offers better picture quality for

video devices connected to the unit.

S-Video Connection

S-Video connection offers good picture quality for video

devices connected to the unit.

If you connect to the unit’s ComponentVideo Input jacks,

connect Analog Audio cables to the Analog Audio L/R Input

jacks for the ComponentVideo connector jacks.

If you connect to the unit’s S-Video Input jack, connect audio

cables to the Audio L/R jacks right below the CompositeVideo

connector.

32”

component video cables (red

blue green)

S-Videeo cable

audio cables

(green) (blue) (red)

TITLE

CHAPTER 15

REPEAT A-B

TITLE

CHAPTER 15

REPEAT A-B

Blu-raay/DVD recorder, camcorder and

VCR with the S-Video output jack

Blu-ray/DVD recorder with

the component video output jacks

26”

S-Videeo cable

component video cables

(red blue green)

audio cables

(green) (bluue) (red)

TITLE

CHAPTER 15

REPEAT A-B

TITLE

CHAPTER 15

REPEAT A-B

Blu-raay/DVD recorder, camcorder and

VCR with the S-Video output jack

Blu-ray/DVD recorder with

the component video output jacks

(green) (bluue) (red)

22”/19”

S-Videeo cable

audio cables

component video cables

(red

blue green)

Note

• The unit accepts 480i/480p/720p and 1080i of video signals for

this connection.

Download from Www.Somanuals.com. All Manuals Search And Download.

CompositeVideo Connection

Digital Audio Output Connection

(for digital broadcasting and DVD functions only)

If you connect this unit to an external digital audio device, you

can enjoy multi-channel audio like 5.1ch digital broadcasting

sound.

CompositeVideo connection offers standard picture quality

for video devices connected to the unit. If you connect to the

unit’s CompositeVideo Input jack, connect audio cables to

the Audio L/R Input jacks right below the CompositeVideo

connector jacks.

Use a digital audio coaxial cable to connect the unit to

external digital audio devices.

When the Audio is monaural, then only connect to the Audio

L Input jack.

32”

video cable

audio cables

Dolby Digital

decoder

digital audio coaxial cable

video game

camcorder

26”

STAND-BY

STEREO

digital audio coaxial cable

VCR

26”

video cable

audio cables

Dolby Digital

decoder

22”/19”

camcorder

video game

digital audio coaxial cable

STAND-BY

STEREO

VCR

22”/19”

video cable

audio cables

Note

• If you connect to the S-Video Input jack and the CompositeVideo

Input jack at the same time, the S-Video connection will have

priority.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Analog Audio Output Connection

HDMI-DVI conversion cable

26”

<32MD311B/32MD301B/26MD311B/26MD301B only>

(for both analog and digital broadcasting)

If you connect this unit to an external analog audio device, you

can enjoy stereo (2-channel) audio.

Use audio cables to connect the unit to external analog audio

devices.

To HDMI 1 Input

jack only

HDMI-DVI conversion

cable should be with

ferrite core.

mini audio cable

32”

audio cables

stereo

system

personal computer

22”/19”

audio cables

stereo mini plug cable

stereo system

VGA cable should be

with ferrite core.

26”

VGA cable

The following video signals can be displayed:

Format

Resolution

Refresh rate

VGA

SVGA

XGA

640

480

800

1,024

1,280

1,360

600

768

60Hz

WXGA

audio cables

Other formats or non-standard signals will not be displayed

correctly.

Note

• Please purchase theVGA cable or HDMI-DVI conversion cable

that has a ferrite core.

PC Connection

If you connect this unit to your PC, you can use this unit as a

PC monitor.

For 32MD311B, 32MD301B, 26MD311B and 26MD301B,

the unit can be connected to your PC that has a DVI terminal.

Use an HDMI-DVI conversion cable for this connection and it

requires stereo mini plug conversion cable as well.

For 22MD311B, 19MD311B and 19MD301B, those unit is

equipped with a PC input jack. Use anVGA cable for this

connection and it requires stereo mini plug audio cable as

well.

• The following operations may reduce noise.

- Attach a ferrite core to the AC power cord of your PC.

- Unplug the AC power cord and use the built-in battery of your

PC.

Cable Management

<32MD311B/32MD301B/26MD311B/26MD301B only>

32”

Keep the cables through this holder to avoid tangling them.

personal computer

mini auudio cable

To HDMI 1 Input

jack only

audio cables

HDMI-DVI conversion

cable should be with

ferrite core.

HDMI-DVI conversion cable

Download from Www.Somanuals.com. All Manuals Search And Download.

USEFULTIPS

Troubleshooting Guide

If the unit does not perform properly when operated as instructed in this manual,

check the following chart and all connections once before calling for service.

Symptom

Remedy

•

Make sure the AC power cord is plugged in.

•

Make sure that the AC outlet supplies the proper voltage, plug another electrical appliance into

the AC outlet to ensure that AC outlet operates normally.

No power

•

If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit to reset itself.

•

Press only one button at a time. Do NOT press more than one button at the same time.

Ensure that no buttons on the remote are depressed and move freely.

Control button's do not work.

•

Check whether the connection of the antenna, cable receiver or satellite box is connected

correctly.

Check whether all the cables to the unit are connected to the correct output jack of your device

like Blu-ray/DVD recorder.

Power is ON but no screen image.

•

Make sure that the selected input mode is connected to the working input jack.

Check if your computer is NOT in sleep mode when the input mode of this unit is in PC mode.

Tap any key on the keyboard to wake up your computer.

•

Check if the power is on.

Check if the correct input mode is selected.

Check whether all the cables to the unit are connected to the correct output jack of your device

like Blu-ray/DVD recorder.

•

View otherTV channels.The problem might be limited to the broadcasting station or weak signal

strength.

Unplug the AC power cord and wait for about 1 minute, then plug the AC power cord and turn

on the unit again.

Check whether the connection of the antenna, cable receiver or satellite box is connected

correctly.

No picture or sound

•

Make sure that the selected input mode is connected to the working input jack.

Check if your computer is NOT in sleep mode when the input mode of this unit is in PC mode.

Tap any key on the keyboard to wake up your computer.

•

Make sure that the sound is not muted. Press MUTE so that the volume bar and current volume

level will appear on theTV screen.

Make sure that the volume is NOT set to [ ] or [Mute]. If so, use VOL +/− to adjust the desired

volume.

•

View otherTV channels.The problem might be limited to the broadcasting station or weak signal

strength.

Adjust [Color] in the main menu.

No color

Adjusted [Picture] or [Sound]

settings are not effective every time

the unit is turned on.

You must set [Home] in [Location]. p.26

➠

Otherwise, the settings you adjusted will not be memorized after the unit goes into standby mode.

•

Electrical interference from nearby appliances may affect picture quality.

Adjust [Contrast] and [Brightness] in the main menu.

View otherTV channels.The problem might be limited to the broadcasting station or weak signal

strength.

For the best picture quality, watch "High Definition" wide screen programs.

If the HD content is not available, watch "Standard Definition" programs instead.

Sound okay, picture poor

Picture okay, sound poor

•

View otherTV channels.The problem might be limited to the broadcasting station or weak signal

strength.

•

Check if the audio cable is connected in correctly.

You may be getting interference from electrical appliances, automobiles, motorcycles or ﬂuorescent

lights.

Try moving the unit to another location to see if this is the cause of the problem.

You see a distorted picture or hear

an unusual sound.

•

Electrical interference from nearby appliances may affect picture quality.

View otherTV channels.The problem might be limited to the broadcasting station or weak signal

strength.

Ghosts, lines or streaks in picture

You see "noise" or "trash" on the

•

When the capabilities of the unit exceed the capabilities of the digital broadcasting, the signal will

be increased to match the capabilities of the display of the unit.This may cause noise or trash.

screen.

Different color marks on theTV

screen

View otherTV channels.The problem might be limited to the broadcasting station, missing data or

pixelation.

•

This unit will memorize the volume level from the last time you adjusted it.

If the volume of the sound from another device is higher or lower, then the loudness will change.

You switch to a different input and

the volume changes.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Symptom

Remedy

You switch to a different input and

the screen size changes.

•

This unit will memorize the viewing mode from the last time you used the particular input modes.

•

For 22MD311B, 19MD311B and 19MD301B, make sure that [Horizontal Position] and

[Vertical Position] in [PC Settings] are set correctly if you are using this unit as a PC monitor.

If you are watchingTV or using the CompositeVideo, ComponentVideo or HDMI with 480i Input,

press FORMAT repeatedly to switch various screen modes.

The display image does not cover

the entire screen.

Captions are displayed as a white

box. No caption is displayed in

the Closed Caption-supported

program.

•

Interference from buildings or weather conditions may cause captioning to be incomplete.

Broadcasting station may shorten the program to insert advertisement.

The closed caption decoder cannot read the information of the shortened program.

No caption is displayed when

playing back a disc or a cassette

tape containing captions.

•

The disc or cassette tape may be illegally copied, or the caption signal might not have been read

during copying.

Black box is displayed on theTV

screen.

•

The text mode is selected for caption. Select [CC-1], [CC-2], [CC-3], [CC-4] or [Off].

Make sure the disc is compatible with the unit.

Completely distorted picture or

black/white picture with DVD.

Picture freezes momentarily during

playback.

Check the disc for ﬁnger prints/scratches and clean with a soft cloth wiping from center to edge.

•

Clean the disc.

Ensure the disc is correctly inserted.

Check if the disc is defective by trying another disc.

Cancel the parental lock or change the control level.

Insert a correct disc that plays on this unit.

Handle a disc with special care so that it does not have ﬁngerprints, scratches, or dusts on its

surface.

Disc cannot be played.

Buttons do not work or the unit

stops responding.

•

To completely reset the unit, unplug the AC power cord from the power outlet for 5-10 seconds.

Operations may not be permitted by the disc. Refer to the instructions of the disc.

The unit does not respond to

some operating commands during

playback.

•

The angle cannot be switched for DVD which do not contain multiple angles. In some cases

multiple angles are only recorded for speciﬁc scenes.

Angle does not switch.

Playback does not start when the

title is selected.

•

Check the [PARENTAL] setting.

The password for rating level has

been forgotten.

Enter the default password (4737), then your forgotten password will be cleared.

Note

• The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a ﬁxed point of blue,

green or red.

This is not to be considered a defect in the LCD screen.

• Some functions are not available in speciﬁc modes, but this is not a malfunction. Read the description in this manual for more details on

correct operations.

• Some functions are prohibited on some discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

FAQ

Question

Answer

•

Check the antenna or cable connection to the main unit.

•

Check the batteries of the remote control.

Check if there is an obstacle between the infrared sensor window and the remote control.

•

Test the signal output use [IR Signal Check]

p.43

➠

If okay, then possible infrared sensor trouble.

•

Aim the remote control directly at the infrared sensor window on the front of the unit.

Reduce the distance to the unit.

Re-insert the batteries with their polarities (+/− signs) as indicated.

When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote

control signal of this unit.

My remote control does not work.

What should I do?

•

Move the infrared-equipped device away from this unit, change the angle of the infrared sensor or

turn off the infrared communication function.

How come the Initial setup

appears every time I turn on this

unit?

•

Connect the RF coaxial cable to the unit directly and run the initial setup.

Make sure to complete the channel scan before the unit goes into standby mode.

•

Make sure [Autoprogram] has been completed.

p.21

➠

Autoprogram must be completed when you set up the unit for the ﬁrst time or move it to a location

where previously unavailable channels are broadcast.

•

The selected channel may not be broadcasting.

When [Autoprogram] is interrupted and not completed, some channels will not be received. Make

Why can I not watch some RF

signalTV programs.

sure to complete the Autoprogram.

p.21

➠

•

The selected channel cannot be viewed by the [Child Lock] setting.

p.23

➠

The unit requires some kind of antenna input.An indoor antenna (VHF/UHF), an external antenna

(VHF/UHF) or an RF coaxial cable from your wall cable/satellite box needs to be plugged into the

unit.

•

Check if the correct input mode is selected by pressing SOURCE or using CH +/−.

[Switching Each Input Mode]

p.16

➠

How come there is no image from

the connected external devices?

•

Check the antenna or cable connection to the unit.

When using the ComponentVideo Connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/

Cr) connectors are connected to their corresponding colored jacks on the unit.

•

Many digital channels have alternate channel numbers.The unit changes the numbers automatically to

the ones signifying the broadcasting station channel number.These basic numbers used for previous

analog broadcasts. (e.g., input ch#30 auto changes to ch#6.1)

When I enter a channel number, it

changes automatically.

•

Clean the disc.

Ensure the disc is correctly inserted.

Check if the disc is defective by trying another disc.

Cancel the parental lock or change the control level.

Insert a correct disc that plays back on this unit.

Handle a disc with special care so that it does not have ﬁngerprints, scratches or dusts on its surface.

My disc cannot be played back.

Is there any way I can play my disc?

•

Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts.

Most captioning production companies can display a dialog to maximum of 220 words per minute. If

a dialog exceeds that rate, selective editing is used to insure that the captions remain up-to date with

the currentTV screen dialog.

Why are captions not displayed

entirely? Or, captions are delayed

behind the dialog.

•

There is no clock function on this unit.

How can I set the clock ?

I cannot change the [Child Lock]

setting because my PIN code no

longer works.

If a Power failure occurs for longer than 10 seconds the child lock setting is retained, but the PIN code

is set to the default code “0000”. [Child Lock]

p.23

➠

Download from Www.Somanuals.com. All Manuals Search And Download.

English

INFORMATION

Maintenance

Glossary

ATSC

Cabinet Cleaning

Wipe the front panel and other exterior surfaces of the

unit with a soft cloth.

Never use a solvent or alcohol. Do not spray insecticide

liquid near the unit. Such chemicals may cause damage and

discoloration to the exposed surfaces.

Acronym that stands for AdvancedTelevision Systems Committee and

the name of the digital broadcasting standards.

•

Aspect Ratio

The width of aTV screen relative to its height. ConventionalTVs are 4:3

(in other words, theTV screen is almost square); widescreen models

are 16:9 (theTV screen is almost twice as wide as its height).

(Consumer Electronics Control)

CEC

Panel Cleaning

Wipe the panel of the unit with a soft cloth. Before cleaning

the panel, disconnect the AC power cord.

This allows you to operate the linked functions between our brand

devices with CEC feature and this unit.We do not guarantee 100%

interoperability with other brands of CEC compliant devices.

ComponentVideo

Disc Handling

Handle the discs so that ﬁngerprints and dust do not adhere

to the surfaces of the discs.

This is a video signal format that conveys each of 3 principal colors

of light (red, blue and green) through different signal lines.This allows

the viewers to experience picture colors as original as it is.There are

several signal formats, includingY/Pb/Pr andY/Cb/Cr.

Dolby Digital

The system developed by Dolby Laboratories to compress digital

sound. It offers stereo sound (2ch) or multi-channel audio.

(High-Definition Multimedia Interface)

HDMI

•

Always store the disc in its protective case when it is not

used.

To clean-off, use a soft cloth.

Do not use a hard cloth since this will mar the disc.

Wipe the disc in a straight line form center to edge.

Never wipe with a circular motion.

Interface that supports all uncompressed, digital audio/video formats

including set-top box, Blu-ray/DVD recorder or digital television, over

a single cable.

•

(High DefinitionTV)

HDTV

Ultimate digital format that produces high resolution and high picture

quality.

Do not use detergent or abrasive cleaning agents.

NTSC

Acronym that stands for NationalTelevision Systems Committee and

the name of analog broadcasting standards.

Servicing

Should your unit become inoperative, do not try to correct

the problem yourself.There are no user serviceable parts

inside. Call our toll free customer support line found on the

cover of this manual to locate an authorized service center.

Off the air NTSC signals are no longer being sent by major

broadcasting stations in the USA.

PIN code

A stored 4-digit number that allows access to parental control features.

Region Code

If the Laser Optical Pickup Unit is Dirty

Regions associate discs and players with particular areas of the world.

This unit will only play back discs that have compatible region codes.

You can find the region code of your unit by looking on the rear panel.

Some discs are compatible with more than one region (or all regions).

If the unit still does not perform properly when it is operated,

while referring to the relevant sections and to [Troubleshooting

Guide] in this manual, the laser optical pickup unit may be

dirty. Consult your dealer or an Authorized Service Center for

inspection and cleaning of the laser optical pickup unit.

(Secondary Audio Program)

SAP

Second-audio channel delivered separately from main-audio channel.

This audio channel is used as an alternate in bilingual broadcasting.

IR Signal Check

(Standard DefinitionTV)

SDTV

If the remote control is not working properly, you can use a

digital camera (including a cellular phone with built-in camera)

to see if it is sending out an infrared signal.

Standard digital format that is similar to the NTSC picture quality.

S-Video

Offers higher quality images by delivering each signal, color (c) and

luminance (y) independently of each other through a single cable.

With a digital camera

(including built-in cell phone cameras):

Point the Digital Camera towards the remote

control infrared diode at the front of the

remote control. Press any button on the

remote control and look through the camera

display. If the infrared pulsating light appears

through the camera, the remote control is

sending out an IR signal.

Download from Www.Somanuals.com. All Manuals Search And Download.

General Speciﬁcations

Other Speciﬁcations

Terminals

Antenna Input VHF/UHF/CATV

75Ω unbalanced (F-type)

500mV rms

TV format

Closed Caption system

ATSC/NTSC-MTV standard

Audio Input

CompositeVideo Input

RCA jack x 1

RCA jack (L/R) x 6

§15.122/FCC (digital CC)

§15.119/FCC (analog CC)

1V p-p (75Ω)

S-Video Input

Channel coverage (ATSC/NTSC)

Terrestrial DTV (ATSC)

VHF 2~13

Mini DIN 4 pin jack x 1

1V p-p (75Ω)

286mV p-p (75Ω)

ComponentVideo Input

RCA jack x 3

UHF 14~51 each channel has e.g.)

2.1~2.9, 3.1~3.9, etc.

1V p-p (75Ω)

Pb/Cb 700mV p-p (75Ω)

Terrestrial Analog (NTSC)

VHF 2~13

Pr/Cr 700mV p-p (75Ω)

HDMI Input

HDMI 19pin x 2

UHF 14~69

2~13,A~W,

W+1~W+94 (analog W+1~W+84),

A-5~A-1, 5A

Channel frequency synthesized tuning

system

Direct access keyboard,

Programmable scan, and up/down

Digital Audio Output (coaxial)

CATV

RCA jack x 1

500mV p-p (75Ω)

<32MD311B/32MD301B/26MD311B/26MD301B only>

Analog Audio Output

Tuning system

Channel access

RCA jack (L/R) x 2

500mV rms

<22MD311B/19MD311B/19MD301B only>

PC Input

D-Sub 15pin x 1(RGB)

Mini jack ø3.5mm x 1(audio)

DVD

Headphone Audio Output

1/8 inches x 1(3.5mm)

Discs (playback compatibility)

DVD-video, DVD-RW/-R,

audio CD, CD-RW/-R

Remote control

Digital encoded infrared light system

Frequency response

Operating temperature

DVD (linear sound) 20 Hz to 20 kHz (sample rate: 48 kHz)

41°F (5°C) to 104°F (40°C)

20 Hz to 44 kHz (sample rate: 96 kHz)

Power requirements

20 Hz to 20 kHz

120V~ AC +/− 10%, 60Hz +/− 0.5%

Signal-to-noise ratio (S/N ratio)

90 dB (JEITA)

Total distortion factor

DVD

32”

1 KHz 0.007% (JEITA)

Power consumption (maximum)

150W

LCD

32inches

(31.5 inches measured diagonally)

Audio Output

[32MD311B]

10W, 8Ω x 2

Dimensions <without base>

Width 30.0 inches (760.0mm) 30.0 inches (760.0mm)

Height 20.5 inches (519.3mm) 22.2 inches (563.0mm)

Depth 4.5 inches (114.0mm)

9.4 inches (238.0mm)

Weight

20.29 lbs. (9.20kg)

21.39 lbs. (9.70kg)

[32MD301B]

Dimensions <without base>

Width 30.0 inches (760.0mm) 30.0 inches (760.0mm)

Height 20.5 inches (519.3mm) 22.2 inches (563.0mm)

Depth 5.1 inches (127.5mm)

9.4 inches (238.0mm)

Weight

20.51 lbs. (9.30kg)

21.61 lbs. (9.80kg)

Download from Www.Somanuals.com. All Manuals Search And Download.

English

26”

Power consumption (maximum)

135W

LCD

26inches

Audio Output

[26MD311B]

10W, 8Ω x 2

Dimensions <without base>

Width 25.9 inches (656.0mm) 25.9 inches (656.0mm)

Height 17.7 inches (448.0mm) 19.2 inches (487.0mm)

Depth 5.4 inches (135.0mm)

9.4 inches (238.0mm)

Weight

16.01 lbs. (7.26kg)

17.11 lbs. (7.76kg)

[26MD301B]

Dimensions <without base>

Width 25.9 inches (656.0mm) 25.9 inches (656.0mm)

Height 17.7 inches (448.0mm) 19.2 inches (487.0mm)

Depth 5.9 inches (148.0mm)

9.4 inches (238.0mm)

Weight

16.01 lbs.

(7.26kg)

17.11 lbs. (7.76kg)

22”

[22MD311B]

Power consumption (maximum)

70W

LCD

Audio Output

Dimensions <without base>

22inches

(21.6 inches measured diagonally)

1W, 16Ω x 2

Width 21.3 inches (539.0mm) 21.3 inches (539.0mm)

Height 14.4 inches (364.0mm) 15.8 inches (400.0mm)

Depth 5.3 inches (132.5mm)

8.3 inches (210.0mm)

Weight

10.81 lbs. (4.90kg)

11.69 lbs. (5.30kg)

19”

Power consumption (maximum)

57W

LCD

Audio Output

[19MD311B]

19inches

(18.5 inches measured diagonally)

1W, 16Ω x 2

Dimensions <without base>

Width 18.8 inches (477.5mm) 18.8 inches (477.5mm)

Height 13.1 inches (330.4mm) 14.5 inches (365.8mm)

Depth 5.0 inches (125.0mm)

8.3 inches (210.0mm)

Weight

9.26 lbs. (4.20kg)

9.93 lbs.

(4.50kg)

[19MD301B]

Dimensions <without base>

Width 18.8 inches (477.5mm) 18.8 inches (477.5mm)

Height 13.1 inches (330.4mm) 14.5 inches (365.8mm)

Depth 5.4 inches (134.7mm)

8.3 inches (210.0mm)

Weight

9.15 lbs. (4.15kg)

9.71 lbs. (4.40kg)

•

Designs and speciﬁcations are subject to change without

notice and without our legal obligation.

If there is a discrepancy between languages, the default

language will be English.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

LIMITED WARRANTY

( )

(

)

NINETY 90 DAY LABOR / ONE 1 YEAR PARTS

WARRANTY COVERAGE:

This warranty obligation is limited to the terms as set forth

below.

mission, or (d) if any serial number has been removed or defaced,

or (e) product, accessories or consumables sold “AS IS” without

warranty of any kind by including refurbished product sold “AS

IS” by some retailers.

WHO IS COVERED:

This product warranty is issued to the original purchaser or the

person receiving the product as a gift against defects in materials

and workmanship as based on the date of original purchase

(“Warranty Period”) from an Authorized Dealer. The original

sales receipt showing the product name and the purchase date

from an authorized retailer is considered such proof.

This Limited Warranty does not cover:

•

Shipping charges to return defective product.

Labor charges for installation or setup of the product, adjust-

ment of customer controls on the product, and installation or

repair of antenna/signal source systems outside of the product.

Product repair and/or part replacement because of improper

installation or maintenance, connections to improper voltage

supply, power line surge, lightning damage, retained images or

•

WHAT IS COVERED:

This warranty covers new products if a defect in material or

workmanship occurs and a valid claim is received within the

Warranty Period. At its option, the company will either (1)

repair the product at no charge, using new or refurbished

replacement parts, or (2) exchange the product with a product

that is new or which has been manufactured from new, or ser-

viceable used parts and is at least functionally equivalent or most

comparable to the original product in current inventory, or (3)

refund the original purchase price of the product.

tent for extended periods, product cosmetic appearance items

due to normal wear and tear, unauthorized repair or other

cause not within the control of the company.

Damage or claims for products not being available for use, or

for lost data or lost software.

Damage from mishandled shipments or transit accidents when

returning product.

•

Replacement products or parts provided under this warranty are

covered against defects in materials and workmanship from the

date of the replacement or repair for ninety (90) days or for the

remaining portion of the original product’s warranty, whichever

provides longer coverage for you. When a product or part is

exchanged, any replacement item becomes your property and the

replaced item becomes company property. When a refund is

given, your product becomes company property.

it to operate in any country other than the country for which

it was designed, manufactured, approved and/or authorized, or

•

A product used for commercial or institutional purposes

(including but not limited to rental purposes).

can be provided.

Failure to operate per Owner’s Manual.

Note: Any product sold and identified as refurbished or

renewed carries a ninety (90) day limited warranty.

TO OBTAIN ASSISTANCE…

Contact the Customer Care Center at:

1-866-341-3738

Replacement product can only be sent if all warranty

requirements are met. Failure to follow all requirements

can result in delay.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS

WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-

SUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR

ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR

BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON

THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY

APPLICABLE LAW, ANY IMPLIED WARRANTY OF MER-

CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE

ON THIS PRODUCT IS LIMITED IN DURATION TO THE

DURATION OF THIS WARRANTY.

WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-

TATIONS:

This Limited Warranty applies only to new company manufac-

to any hardware product or any software, even if packaged or

sold with the product, as manufacturers, suppliers, or publishers

may provide a separate warranty for their own products pack-

aged with the bundled product.

The company is not liable for any damage to or loss of any pro-

grams, data, or other information stored on any media contained

within the product, or other additional product or part not cov-

ered by this warranty. Recovery or reinstallation of programs,

data or other information is not covered under this Limited

Warranty.

Some states do not allow the exclusions or limitation of inciden-

tal or consequential damages, or allow limitations on how long an

implied warranty lasts, so the above limitations or exclusions may

not apply to you.

This warranty does not apply (a) to damage caused by accident,

abuse, misuse, neglect, misapplication, or non-supplied product,

(b) to damage caused by service performed by anyone other than

company approved Authorized Service Location, (c) to a product

FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501

Printed in China

Download from Www.Somanuals.com. All Manuals Search And Download.

Learning Resources Baby Toy LER 2049 User Manual
LG Electronics Blu ray Player BP125 User Manual
Liebherr Kitchen Entertainment Center 7083 103 00 User Manual
Liebherr Refrigerator CS 1611 7801 149 00 User Manual
Linksys Network Card WMP54GR User Manual
Logitech Headphones UE 6000 User Manual
Mackie Speaker HD1521 User Manual
Maxxsonics Speaker DWH 252 User Manual
Mellerware Wok 27607 User Manual
Memorex Flat Panel Television MLT2022 User Manual