Owner’s Manual
Please read before using this unit.
DVD/CD Player
INSTRUCCIONES EN
ESPAÑOL INCLUIDAS.
DP170MW8
Supplied Accessories
Contents
PRECAUTIONS
remote control
(NA475UD)
RCA audio/video cables
(WPZ0102TM018 /
WPZ0102LTE01)
Laser Safety ...............................................................................................2
Important Safeguards.............................................................. 3
Location and Handling .........................................................................4
Avoid the Hazards of Electrical Shock and Fire ...........................4
Moisture Condensation Warning......................................................4
About Copyright......................................................................................4
Notice for Progressive Scan Outputs...............................................4
Symbols Used in this Manual .............................................................4
Maintenance.............................................................................................4
About the Discs......................................................................... 5
Playable Discs...........................................................................................5
Unplayable Discs.....................................................................................5
batteries
(AAA x 2)
owner’s manual
Owner’s Manual
(1VMN23650A)
SETUP
Connections.............................................................................. 6
Connection to a TV.................................................................................6
Connection to a TV with an HDMI Compatible Port..................7
Connection to an Audio System .......................................................8
Function Overview ................................................................... 9
Rear Terminals..........................................................................................9
Front Panel Indicator.............................................................................9
HDMI Setup...............................................................................................9
Remote Control ......................................................................................10
Installing the Batteries for the Remote Control..........................10
Connecting to RF Modulator (Not Supplied)
If your TV has antenna in jack only, it is still possible to
connect this unit to your TV by using an RF modulator. In
this case, follow the instructions below.
1) Disconnect the power cords of the devices from the AC
outlet.
2) Make the connection as illustrated below.
3) Set your RF modulator’s channel 3/4 switch to either
3 or 4, whichever the TV channel is least used in your
area. If your RF modulator has a modulator/antenna
switch, set it according to the manual supplied with the
RF modulator.
DVD FUNCTIONS
Playback .................................................................................. 11
MP3, JPEG Playback ................................................................ 12
Kodak Picture CD..................................................................... 12
Dual Playback.......................................................................... 13
Transition Mode ...................................................................... 13
Adjustment of Picture Size ...................................................... 13
Folder Playback....................................................................... 13
On-Screen Display ................................................................... 14
Search Functions ..................................................................... 15
Using Track Search ................................................................................15
Using Title / Chapter Search ..............................................................15
Using Time Search.................................................................................15
Marker Setting.........................................................................................15
Repeat / Random / Programmed Playback ............................ 16
Repeat Playback .....................................................................................16
Repeat A-B Playback.............................................................................16
Random Playback ..................................................................................16
Programmed Playback.........................................................................16
Special Settings ....................................................................... 17
Subtitle Language..................................................................................17
Audio Language.....................................................................................17
Camera Angles........................................................................................17
Black Level Setting.................................................................................17
Stereo Sound Mode ..............................................................................17
Virtual Surround .....................................................................................17
DVD Setting ............................................................................. 18
LANGUAGE Setting................................................................................18
DISPLAY Setting......................................................................................19
AUDIO Setting.........................................................................................20
PARENTAL Setting .................................................................................21
OTHERS Setting.......................................................................................22
Reset to the Default Setting (Except for PARENTAL Setting) 23
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel as
you set the RF modulator’s channel 3/4 switch to. For
more details, follow the manual supplied with the RF
modulator.
rear of this unit
L
Y
CR/PR
COMPONENT VIDEO OUT
COAXIAL
R
AUDIO
OUT
VIDEO
OUT
DIGITAL
CB/PB
HDMI OUT
AUDIO OUT
L
R
RCA video cable
rear of TV
AUDIO
OUT
VIDEO
OUT
RCA audio cable
ANT. IN
rear of your RF
modulator
VHF / UHF
antenna
RF coaxial cable
or
3
4
R
L
ANT. IN CHANNEL
AUDIO IN VIDEO IN TO TV
RF coaxial
cable
cable TV
company
Set channel 3 or 4
Note:
• RF modulator is not supplied with this unit. You need to
purchase it at your local store.
• The quality of picture may become poor if this unit is
connected to an RF modulator.
INFORMATION
If you need additional operating assistance after
reading this owner’s manual, please call
Troubleshooting Guide ........................................................... 23
Specifications .......................................................................... 24
Language Code List ................................................................. 24
LIMITED WARRANTY................................................................ 24
Español .................................................................................... 27
Quick Use Guide............................................................ Back Cover
TOLL FREE : 1-800-605-8610
or visit our web site at
© 2007 Funai Electric Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
12. Power Cord Protection - Power supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should
be followed.
5. Cleaning - Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
13. Lightning - For added protection for this video product
during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet. This will prevent damage to the video product due to
lightning and power-line surges.
14. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be
fatal.
15. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
16. Object and Liquid Entry - Never push objects of any kind into
this video product through any openings as they may touch
dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on the
video product.
17. Servicing - Do not attempt to service this video product
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
EXCEPTION: A product that is meant for uninterrupted service
and, that for some specific reason, such as the possibility of
the loss of an authorization code for a CATV converter, is not
intended to be unplugged by the user for cleaning or any
other purpose, may exclude the reference to unplugging the
appliance in the cleaning description otherwise required in
item 5.
6. Attachments - Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
7. Water and Moisture- Do not use this video product near
water, for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool,
and the like.
PORTABLE CART WARNING
(Symbol provided by RETAC)
8. Accessories - Do not place this video
product on an unstable cart, stand, tripod,
bracket, or table. The video product may
fall, causing serious injury to a child or
adult, and serious damage to the appliance.
18. Damage Requiring Service - Unplug this video product
from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
Use only with a cart, stand, tripod, bracket,
S3125A
or table recommended by the manufac-
turer, or sold with the video product. Any mounting of the
appliance should follow the manufacturer's instructions
and should use a mounting accessory recommended by the
manufacturer. An appliance and cart combination should be
moved with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combination to
overturn.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
video product.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by
following the operating instructions. Adjust only those
controls that are covered by the operating instructions
as an improper adjustment of other controls may result
in damage and will often require extensive work by a
qualified technician to restore the video product to its
normal operation.
9. Ventilation - Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the video
product and to protect it from overheating, and these
openings must not be blocked or covered.
The openings should never be blocked by placing the video
product on a bed, sofa, rug, or other similar surface. This video
product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.
10. Power Sources - This video product should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your
home, consult your appliance dealer or local power company.
For products intended to operate from battery power, or
other sources, refer to the operating instructions.
11. Grounding or Polarization - This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electri-
cian to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
e. If the video product has been dropped or damaged in any
way.
f. When the video product exhibits a distinct change in
performance this indicates a need for service.
19. Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteris-
tics as the original part. Unauthorized substitutions may result
in fire, electric shock or other hazards.
20. Safety Check - Upon completion of any service or repairs
to this video product, ask the service technician to perform
safety checks to determine that the video product is in proper
operating condition.
21. Heat - This video product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
–
–
3
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Location and Handling
Maintenance
•
Do not stand this unit up vertically. Install this unit in a horizontal
and stable position. Do not place anything directly on top of this
unit. Do not place this unit directly on top of the TV.
Servicing
• Please refer to relevant topics on the “Troubleshooting Guide”
on page 23 before returning the product.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts inside.
Turn off, unplug the power plug, and please call our toll free
customer support line found on the cover of this manual to
locate an authorized service center.
• Depending on the TV, noise or disturbance of the picture and/or
sound may be generated if this unit is placed too close to your
TV. In this case, please ensure enough space between your TV
and this unit.
• Do not cover or place this unit in enclosed spaces to prevent
excessive temperature build up.
•
Do not place this unit in direct sunlight, or near heat sources.
• Depending on the environment, the temperature of this unit
may increase slightly. This is not a malfunction.
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent
solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasive.
• Keep this unit away from strong magnetic objects.
• Do not place any object containing water or other liquids on
this unit. In the event that liquid should enter the cabinet,
unplug this unit immediately and contact the retailer or an
authorized service center immediately.
Cleaning Discs
• Do not remove this unit cabinet. Touching parts inside the
cabinet could result in electric shock and/or damage to this unit.
For service and adjustment inside the cabinet, call a qualified
dealer or an authorized service center.
• Be sure to remove disc and unplug the AC power cord from the
output before carrying this unit.
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe
the disc from the center to out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or anti-
static spray intended for analog records.
Avoid the Hazards of Electrical Shock and Fire
Cleaning the Disc Lens
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from AC
outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug the power
cord immediately and take the unit to our authorized service
center for servicing.
• If this unit continues to perform improperly even after
you have referred to the relevant sections and to the
“Troubleshooting Guide” in this manual, the laser optical pickup
unit may be dirty. Consult your dealer or an authorized service
center for inspection and cleaning of the laser optical pickup
unit.
Moisture Condensation Warning
Disc Handling
Moisture may form inside this unit under the following conditions:
• Immediately after a heater is turned on.
• In a steamy or humid room.
• When you handle a disc, hold it by its edge and try not to touch
the surface of the disc.
• Always store the disc in its protective case when not in use.
• When this unit is suddenly moved from a cold to warm
environment.
© 2007 Funai Electric Co., Ltd.
If moisture forms inside this unit, it may not operate properly or
damage the disc. In such case, do not use this unit at least for 2
hours until its inside gets dry.
All rights reserved. No part of this manual may be
reproduced, copied, transmitted, disseminated,
transcribed, downloaded or stored in any storage
medium, in any form or for any purpose without the
express prior written consent of Funai. Furthermore, any
unauthorized commercial distribution of this manual or
any revision hereto is strictly prohibited.
About Copyright
Unauthorized copying, broadcasting, public performance and
lending of discs are prohibited.
This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
Information in this document is subject to change
without notice. Funai reserves the right to change the
content herein without the obligation to notify any
person or organization of such changes.
with the
design is a registered trademark of
Funai Electric Co., Ltd and may not be used in any way
without the express written consent of Funai. All other
trademarks used herein remain the exclusive property of
their respective owners. Nothing contained in this manual
should be construed as granting, by implication or
otherwise, any license or right to use any of the
Notice for Progressive Scan Outputs
Consumers should note that not all high definition television sets
are fully compatible with this product and may cause artifacts
to be displayed in the picture. In case of picture problems with
525 progressive scan output, it is recommended that the user
switch the connection to the ‘standard definition’ output. If
there are questions regarding your TV set compatibility with this
525p DVD player, please contact our customer service center.
trademarks displayed herein. Misuse of any trademarks
or any other content in this manual is strictly prohibited.
Funai shall aggressively enforce its intellectual property
rights to the fullest extent of the law.
Symbols Used in this Manual
Manufactured under license
The following symbols appear in some headings in this manual.
from Dolby Laboratories. “Dolby”
and the double-D symbol are
trademarks of Dolby Laboratories.
:
Description refers to DVD-video.
: Description refers to audio CD.
: Description refers to video CD.
Product that have earned ENERGY STAR® are
designed to protect the environment through
superior energy efficiency.
: Description refers to CD-RW/-R with MP3 files.
: Description refers to CD-RW/-R with JPEG files.
–
–
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Discs
Playable Discs
Type of
Recorded
signals
Mark (logo)
Region code
Media size
Disc types
media
DVD-video
*1, 2, 3, 5, 9
or
5 inches
(12 cm)
or
3 inches
(8 cm)
DVD-RW
DVD-R
*1, 3, 4, 5, 6,
7, 8, 9, 10
e.g.)
title 1
title 2
digital video
(MPEG2)
chapter 1 chapter 2 chapter 3 chapter 4 chapter 1
chapter 2
DVD+RW
DVD+R
*1, 3, 4, 5, 8, 9
video CD
*3, 5, 9, 11
digital video
with audio
video CD
or
audio CD
e.g.)
audio CD
*3, 5, 9
track 1
track 2
track 3
track 4
track 5
track 6
digital audio
5 inches
(12 cm)
or
3 inches
(8 cm)
digital audio
CD-RW
CD-R
*3, 4, 5, 8, 9
or
MP3
or
MP3
or
JPEG
JPEG
e.g.)
folder 1
folder 2
file 1
file 2
file 3
file 4
file 5
file 6
Kodak
Picture CD
*3, 4, 5, 8, 9
JPEG
is a trademark of DVD Format/Logo Licensing Corporation.
is trademark of Eastman Kodak Company.
If you cannot play back a disc which bears one of the marks above, check the following.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-video does not operate as described in this manual due to the intentions of the disc’s producers.
*3: Scratched or stained discs may not be played back.
*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special prop-
erties of discs.
*5: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back. Even if
they are played back, the sound or video quality will be compromised.
*6: You may play back the unfinalized DVD-RW/-R recorded in the video format on our brand’s DVD recorder. However, depending
on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth,
etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD recorder.
*7: Only discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at all (the
picture or sound may not be smooth, etc.).
*8: If the recorded portion of the disc is too small (less than 2-3/16 inches (55 mm) across), it may not play back properly.
*9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
*10: Discs recorded in the VR (video recording) format cannot be played back
*11: This unit conforms to ver. 1.1 and ver. 2.0 of video CD standard with PBC function.
Ver. 1.1 (without PBC function) : You can enjoy playback picture as well as music CD.
Ver. 2.0 (with PBC function) : While using a video CD with PBC function, “PBC” appears on the TV screen.
NOTE : When playing video CD with PBC function, some operations (e.g., track search and repeat tracks) cannot be performed.
Cancel PBC function temporarily to perform those operations. (Refer to page 11.)
What is PBC? “PBC” stands for playback control.
You can play back interactive software using menu screens. Refer to instructions in the video CD.
Unplayable Discs
NEVER play back the following discs as malfunction may result!
DVD-RAM, DVD-audio, CD-i, photo CD, DVD with region codes other than 1 or ALL, DTS-CD, DVD-ROM for personal computers, CD-ROM
for personal computers
On the following disc, the sound MAY NOT be heard.
super audio CD
Note:
• Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio CD layer
cannot be delivered.
Any other discs without compatibility indications
–
–
5
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
Connections
Connection to a TV
analog audio
standard picture
good picture
better picture
TV
COMPONENT
VIDEO IN
COMPONENT
VIDEO IN
AUDIO IN
S-VIDEO IN
VIDEO IN
L
Y
Y
R
C
B
R
P
B
or
or
or
and
A
U
D
I
O
I
N
L
R
V
I
D
E
O
I
N
C
P
R
RCA audio cable
RCA video cable
S-video cable
component video cable
This unit
L
Y
L
Y
Y
CR/PR
COMPONENT VIDEO OUT
COAXIAL
L
Y
CR/PR
COMPONENT VIDEO OUT
COAXIAL
R
R
R
AUDIO
OUT
VIDEO
OUT
DIGITAL
CB/PB
HDMI OUT
AUDIO OUT
AUDIO
OUT
VIDEO
OUT
AUDIO
OUT
VIDEO
OUT
DIGITAL
AUDIO
OUT
VIDEO
OUT
S-VIDEO
OUT
C
B/P
C
B/PB
HDMI OUT
CB/PB
AUDIO OUT
COMPONENT
VIDEO OUT
AUDIO OUT
VIDEO OUT
S-VIDEO OUT
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note:
• Connect this unit directly to your TV. If RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy
protection system.
If your TV is compatible with 525 (480) progressive scanning and you want to enjoy that high quality picture;
You must select the connection COMPONENT VIDEO OUT above and progressive scanning mode. To set the mode, set
“PROGRESSIVE” to “ON” in “DISPLAY” menu. Refer to pages 18-20 for more details.
• When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output at
all.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in “DISPLAY” menu or by pressing and holding [PLAY B] on
the front of the unit for more than 5 seconds.
After connecting to your TV:
You will need to switch to video input on your TV. This is usually marked TV/VIDEO, INPUT or AUX.
Please refer to your TV’s owner’s manual for details.
Input modes for common TV brands:
Listed below are inputs for common brand name TV’s.
Admiral:
Curtis Mathis:
GE:
AUX
Panasonic:
RCA:
TV/VIDEO
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
Samsung:
Sanyo:
TV/VIDEO
Hitachi:
INPUT, AUX
VIDEO
JVC:
VIDEO, VIDEO1, VIDEO2, VIDEO3
Sharp:
Sony:
Toshiba:
Zenith:
00
Kenwood:
LXI-Series:
Magnavox:
AUX
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00
AUX CHANNEL
–
–
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to a TV with an HDMI Compatible Port
A simple 1-cable connection with a device having an HDMI (High-Definition Multimedia Interface) connector allows digital transfer of
the digital images of DVD-video and other devices.
best picture
TV
HDMI IN
HDMI cable
This unit
HDMI OUT
When connecting with an HDMI cable, the audio signal will be output as the digital audio signal simultaneously, so you
do not need the analog audio connection described on page 6.
Cables not included.
Please purchase the necessary cables at your local store.
Actual output modes by media
DOLBY DIGITAL Setting
Audio Recording Format
Dolby Digital
BITSTREAM *1
Dolby Digital
2channel PCM
2channel PCM
2channel PCM
2channel PCM
PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
DVD-video
LPCM
audio CD
video CD
MP3
*1 If the connected device is not compatible with HDMI BITSTREAM, signals are output on PCM.
Copyright protection system
To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display device
(or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system). HDCP
is copy protection technology that comprises data encryption and authentication of the connected AV device.
This unit supports HDCP. Please read the operating instructions of your display device (or AV amplifier) for more information.
*HDMI: High Definition Multimedia Interface
Note:
• When using an HDCP-incompatible display device, the image will not be viewed properly.
• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, this unit cannot
be controlled by another device via the HDMI connector.
• The audio signals from the HDMI connector (including the sampling frequency and bit length) may be limited by the device that is
connected.
• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with device
such as this, audio signals are not output from the HDMI output connector.
• When the set’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI converter cable,
the signals are output in digital RGB.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
–
–
7
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to an Audio System
Analog Audio Connection
stereo system
Digital Audio Connection
Dolby Digital decoder,
MD deck or DAT deck
Audio
COAXIAL
L
R
analog audio
input jacks
digital audio
input jack
RCA audio cable
digital audio coaxial cable
This unit
L
Y
L
Y
CR/PR
COMPONENT VIDEO OUT
L
Y
CR/PR
COMPONENT VIDEO OUT
COAXIAL
COAXIAL
R
R
R
AUDIO
OUT
VIDEO
OUT
DIGITAL
CB/PB
HDMI OUT
AUDIO OUT
AUDIO
OUT
VIDEO
OUT
C
B/PB
AUDIO
OUT
VIDEO
OUT
DIGITAL
HDMI OUT
C
B/PB
AUDIO OUT
AUDIO OUT
DIGITAL AUDIO OUT
Setting
SETUP > QUICK >
DOLBY DIGITAL
Connection
Supplied cables used in this connection are as
follows:
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
BITSTREAM
• RCA audio cable (L/R) x 1
Connecting to other device (an MD deck
or DAT deck etc.) without Dolby Digital
decoder.
Please purchase the rest of the necessary cables at
your local store.
PCM
* To complete these settings, refer to pages 18-20.
Note:
• The audio source on a disc in a Dolby Digital multi channel
surround format cannot be recorded as digital sound by an MD
or DAT deck.
• By hooking this unit up to a Dolby Digital decoder, you can
enjoy high-quality Dolby Digital multi channel surround sound
as heard in the movie theaters.
• Playing back a DVD using incorrect settings may generate
noise distortion and may also damage the speakers.
–
–
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Overview
Rear Terminals
1
2
3
L
Y
CR/PR
COMPONENT VIDEO OUT
COAXIAL
R
DIGITAL
AUDIO
OUT
VIDEO
OUT
S-VIDEO
OUT
HDMI OUT
CB/PB
AUDIO OUT
6
5
4
1: AUDIO OUT jacks
5: DIGITAL AUDIO OUT COAXIAL jack
Connect a digital audio coaxial cable from here to the digital
audio input jack of your digital audio receiver.
6: VIDEO OUT jack
Connect an RCA audio cable from here to the audio input jack of
your television or audio device.
2: COMPONENT VIDEO OUT jacks
Connect a component video cable from here to the component
video input jacks of your television.
Connect an RCA video cable from here to the video input jack of
your television.
3: S-VIDEO OUT jack
Connect an S-video cable from here to the S-video input jack of
your television.
Note:
•
Please purchase the necessary cables at your local store.
(Refer to pages 6-8.)
4: HDMI OUT jack
Connect an HDMI cable from here to the HDMI compatible port
of a television or other display device.
Front Panel Indicator
POWER
PLAY
HDMI
1
2
3
1
2
POWER indicator
Lights up when power is on.
PLAY indicator
Lights up when inserted disc is being played back.
Blinks when an unplayable disc is inserted.
3
HDMI indicator
Lights up when there is video signal output from the HDMI OUT jack.
HDMI Setup
Note:
SETUP > QUICK>
HDMI MODE
480p
Setting
• Video and audio signals may distorted temporarily when
changing to/from the HDMI output mode.
Video Output Signal
480 Progressive
720 Progressive
1080 Interlaced
• Use a display with an HDMI-compatible port.
• You can check the HDMI connection status by pressing
[DISPLAY] during playback with the HDMI output mode (refer
to page 14).
• The HDMI mode that is not supported by display device is
grayed in the settings.
• If the TV is not compatible with newly selected HDMI output
mode, press and hold [PLAY B] on the front of the unit for
more than 5 seconds to reset the setting to default.
720p
1080i
1080 Progressive
1080p
* To complete these settings, refer to pages 18-19.
–
–
9
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Disc
Button
(Alphabetical order)
STANDBY-ON
OPEN/CLOSE
1
4
7
2
5
8
0
3
6
1
4
2
5
8
0
3
6
9
•To select chapter or title directly.
•To select track or file directly.
9
+10
7
CLEAR
•To move the cursor and determine •To move the cursor and determine
OK
+10
NEXT
its position.
its position. (CD/MP3/JPEG)
PREV
PLAY
•To search forward/backward
through a disc.
•To search forward/backward
through a disc.
STOP
PAUSE
TITLE
•To begin slow forward/reverse
playback in the pause mode.
•To begin slow forward playback in
the pause mode. (VCD)
RETURN
A-B
•To repeat between your chosen
point A and B.
•To repeat between your chosen
point A and B. (CD/VCD)
OK
REPEAT
DISC
SETUP
•To rotate a picture of JPEG files.
(JPEG)
•To select “STEREO”, “L-ch” or
“R-ch”. (CD/VCD)
•To select camera angles on a disc.
•To select audio languages on a disc.
MENU
ANGLE
AUDIO
A-B
ZOOM
AUDIO
MODE
REPEAT
SUBTITLE
DISPLAY
REPEAT
ANGLE
SEARCH
•To clear the markers. (CD/VCD)
•To remove status number in
program input.
•To clear the markers.
CLEAR
•To clear the numbers entered
incorrectly.
•To clear the numbers entered
incorrectly.
•To cancel the point for A-B repeat.
•To cancel the point for A-B repeat.
(CD/VCD)
Installing the Batteries for
the Remote Control
DISC
•To call up the menu on a disc.
•To call up the file list. (MP3/JPEG)
MENU
•To display the current disc or HDMI •To display the current disc or HDMI
Install the batteries (AAAx2) matching the
polarity indicated inside battery compart-
ment of the remote control.
DISPLAY
MODE
mode.
mode.
•To arrange the playing order or
play randomly. (CD/MP3/JPEG)
•To set virtual surround on/off.
(CD/VCD/MP3)
•To set black level on/off.
1
3
2
•To set virtual surround on/off.
•To set black level on/off. (VCD)
•To activate the slide show mode.
(JPEG)
OPEN/CLOSE
PAUSE
•To open or close the disc tray.
•To turn the unit on.
•To open or close the disc tray.
•To turn the unit on.
•To pause disc playback.
•To pause disc playback.
Keep in mind the following when using the
remote control:
•To advance playback one frame at a •To advance playback one frame at a
time.
time. (VCD)
•
Make sure that there are no obstacles
between the remote control and the infrared
sensor window on the unit.
PLAY
•To begin disc playback.
•To turn the unit on.
•To begin disc playback.
•To turn the unit on.
NEXT
PREV
•To skip chapters.
•To skip tracks or files.
• The maximum operable ranges from the
unit are as follows.
- Line of sight: approx. 23 feet (7m)
- Either side of center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
•To play back a track or disc
repeatedly. (CD/VCD)
•To play back a chapter or title
repeatedly.
REPEAT
•To play back a file, folder or disc
repeatedly. (MP3/JPEG)
RETURN
•To return to the previous operation •To return to the previous operation
in menu.
in menu.
STANDBY-ON
PREV
PLAY
NEXT
STOP
OPEN/CLOSE
POWER
PLAY
HDMI
•To search track.
•To search chapter, title or time.
•To set or search the markers.
•To search time. (CD/VCD)
•To set or search the markers.
(CD/VCD)
SEARCH
SETUP
•To call up the setup menu.
•To turn the unit on or off.
•To call up the setup menu.
•To turn the unit on or off.
•To stop playback.
STANDBY-ON
STOP
Note:
•To stop playback.
• Do not mix alkaline and manganese
batteries.
•To select subtitles on a disc.
SUBTITLE
TITLE
• Do not mix old and new batteries.
• Always remove batteries from remote
control if they are dead or if the
remote control is not to be used for
an extended period of time. This will
prevent battery acid from leaking into
the battery compartment.
•To return to the top file of the
highest hierarchy in the program
and file list. (MP3/JPEG)
•To call up the top menu on a disc.
•To magnify part of a picture. (2x/4x)
•To magnify part of a picture. (2x)
(VCD/JPEG)
ZOOM
–
–
10
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD FUNCTIONS
Please note : most instructions in this manual refer to remote control use.
Playback
Before:
STANDBY-ON
OPEN/CLOSE
Turn on the TV, amplifier and any other
components which are connected to this
unit. Make sure the TV and audio receiver
(not supplied) are set to the
correct channel.
STANDBY-ON
PREV
PLAY
NEXT
STOP
OPEN/CLOSE
1
1
4
2
5
8
0
3
6
9
POWER
PLAY
HDMI
7
CLEAR
+10
NEXT
PREV
PLAY
3
4
1
3
4
1
2
STOP
PAUSE
(
1
on page 12
)
To open the disc
tray
Insert a disc with
label facing up.
Note:
2
• When you play back a CD-RW/-R with MP3/JPEG files, details on page 12.
“
”
•
may appear at the top-right on the TV screen when the operation is prohibited by
the disc or this unit.
• Some DVD may be played back from title 2 or 3 due to specific programs.
OPEN/CLOSE
STANDBY-ON
• During the playback of a 2-layered disc, pictures may stop for a moment. This happens while the 1st
layer is being switched to the 2nd layer. This is not a malfunction.
To start playback
To stop playback
• You can change the on-screen language for DVD function in “PLAYER MENU” menu. Refer to page 18.
• When the unit is connected with an HDMI cable, a revocation list update screen may appear when
you try to play back the DVD-video containing a revocation list.
3
4
STOP
PLAY
• If the unit is connected to the unauthorized display device with an HDMI cable, the audio/video signal
may not be output when playing back a commercial DVD-video.
Paused and Step-by-Step Playback
Canceling and Calling Back PBC Function
Press [PAUSE F] during playback.
1) Insert a video CD and press [STOP C].
To continue playback, press [PLAY B].
2) Press [the Number buttons] to enter the desired track number.
•
PBC function is now canceled and the playback of the video
CD will start.
3) To call back PBC function, press [STOP C] twice, and then press
The disc goes forward by one frame each time [PAUSE F] is
pressed in the pause mode.
To continue playback, press [PLAY B].
[PLAY B].
•
The title menu will appear.
Disc Menu
Note:
• For DVD, set “STILL MODE” to “FIELD” in “DISPLAY” menu if
pictures in the pause mode are blurred. Refer to pages 18-19.
Some discs contain menus which allow you to customize DVD
playback. Use [K / L / s / B] to select an item, then press [OK]
(or [PLAY B]).
To use [PREV H]], [NEXT G] on this unit
Calling Up a Menu Screen during Playback
Press once to skip chapters, tracks or titles to a desired point.
Fast Forward / Reverse Search
• Press [DISC MENU] to call up the disc menu.
• Press [TITLE] to call up the title menu.
Press [g] or [h] repeatedly during playback to
E
1
select the required forward or reverse speed.
Note:
To use [PREV H]], [NEXT G] on this unit
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for details.
Pressing and holding [PREV H]] or [NEXT G] on this unit will also
change forward or reverse playback speed.
Resume Playback
To continue playback, press [PLAY B].
Note:
•
For DVD, fast forward or reverse search speed is different depending
on the disc. Approximate speed is 1(2x), 2(8x), 3(20x), 4(50x), 5(100x).
Press [STOP C] during playback. Resume message will appear on
the TV screen.
• For audio CD, video CD and MP3, approximate speed is 1(2x), 2(8x), 3(30x).
Press [PLAY B], playback will resume
Resume ON
from the point at which playback was
stopped.
Slow Forward / Reverse Search
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Press [g] or [h] repeatedly in the pause mode to
select the required forward or reverse speed.
1
e.g.) DVD
To use [PREV H]], [NEXT G] on this unit
Pressing and holding [PREV H] or [NEXT G] on this unit in the
pause mode will also change forward or reverse playback speed.
To continue playback, press [PLAY B].
Note:
• To cancel resume, press [STOP C] one more time in the stop
mode.
• For MP3 and JPEG, playback will resume from the beginning of
the track at which playback was stopped.
• The resume playback information stays on even when the
power is turned off, as long as the disc stays in the unit.
• Some video CD with PBC function resume playback from the
beginning of the track.
Note:
• Slow forward or reverse speed is different depending on the
disc. Approximate speed is 1(1/16x), 2(1/8x), 3(1/2x).
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if pictures in
the slow playback mode are blurred. Refer to pages 18-19.
• Only slow forward is available when playing back a video CD.
–
–
11
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Zoom
Note:
• Depending on some sections, it may take a while to be
recognized.
• Press [TITLE] to return to the first item.
1) Press [ZOOM] during playback.
2) Press [ZOOM] repeatedly to select the required zoom factor:
2x, 4x or off.
• Folders and MP3 and JPEG files are displayed respectively as
3
,
and
.
• A maximum of 255 folders or 999 files may be recognized on
x2
x4
one disc.
• Up to 8 hierarchies can be recognized in one folder. File in the
9th or deeper hierarchies cannot be played back.
3) Press [K / L / s / B] to slide the zoomed picture across the TV
screen.
4) To exit zoom mode, press [ZOOM] to select off.
Kodak Picture CD
Note:
This unit can also run JPEG files stored on Kodak Picture CD. The
picture CD is a service to convert photographs taken by a
conventional film camera into digital data and write the data
on a CD. The user can enjoy picture images on the television set
by playing back the picture CD. For details of Kodak Picture CD,
contact a shop that deals with developing service of Kodak Inc.
• Zoom function does not work while the disc menu is
displayed.
• 4x zoom is not available on some discs.
• Only 2x zoom is available on video CD and JPEG.
• You cannot slide the zoomed picture on some JPEG files.
MP3, JPEG Playback
MP3 or JPEG is a method of compressing files. You can copy MP3
or JPEG files on CD-RW/-R from the computer and play back the
files on this unit.
When selecting the file :
1
Picture 1
Picture 2
Picture 3
Picture 4
Picture 5
1/32
Picture 6
Insert a CD-RW/-R with MP3/JPEG files, the file list will automatically
appear on the TV screen. Press [DISC MENU] when you want to
call up the file list again while CD-RW/-R with MP3 files is already
inserted.
Current track number /
the number of total tracks
To play back
PLAY
or
OK
• If a Kodak Picture CD file is selected, an image will be
played back from the selected track and go to next one
in turn.
When selecting the folder:
1
FILE LIST
DISC NAME
FOLDER
MP3
3
PLAY
JPEG
folder name
folder name
folder name
1
2
3
4
or
OK
folder name
• Press [STOP C] to stop playback.
3
file name
file name
file name
1
2
3
3
OK
• If all menu items cannot be displayed in the TV screen,
“G” appears at the right bottom of the screen,
indicating that the user can view remaining items on the
next page. “H” appears, it indicates that the user can
view other items on the previous page. The track number
of the currently highlighted item and the total tracks are
shown at the center bottom of the screen.
• If “G” is shown at the right bottom, use [NEXT G] to
view the next page. If “H” is shown at the left bottom,
use [PREV H] to view the previous page.
1/
2
PLAY
folder name
1
• Press [B] when you want to go to the next hierarchy.
• Press [s] when you want to go back to the previous
hierarchy (except for the top hierarchy).
Press [STOP C] once to stop
playback temporarily.
2
STOP
• It may take some time until all menu items are displayed
on the menu screen.
Refer to “Resume
Playback” on page 11.
This unit recommends the files recorded under the following
circumstances:
Note:
•
A track is displayed for 5 seconds and then the next track is
displayed.
Applicable MP3 file
Remarks
• Every press on [ANGLE] will turn the image clockwise by 90
degrees when an image is displayed.
Sampling frequency:
44.1 kHz or 48 kHz
• For MP3 file recorded in VBR
(variable bit rate), the unit
may not display the actual
elapsed time.
Constant bit rate:
32 kbps ~ 320 kbps
Applicable JPEG file
Remarks
Normal playback
Upper limit: 6,300 x 5,100
Pixel lower limit: 32 x 32 pixel
File size: Max. 7 MB
• A JPEG image that extends
beyond the screen is
reduced so that it will be
displayed within the screen.
Dual playback
Upper limit: 5,000 x 5,000
Pixel lower limit: 32 x 32 pixel
File size: Max. 5 MB
–
–
12
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Playback
Adjustment of Picture Size
This unit allows you to play back MP3 and JPEG files simultaneously.
Available only when “DUAL PLAYBACK” is “ON”. Refer to pages 18-
22 on how to set “DUAL PLAYBACK” to “ON” or “OFF”.
Depending on the TV connected to this unit, the overall picture
cannot be displayed and the edge of the picture can be cut off. In
this case, you can adjust the size of the JPEG playback image on
screen.
Press [DISC MENU] during MP3/JPEG playback.
1
During playback, press [MODE] repeatedly until “
appears.
”
1
FILE LIST
DISC NAME
FOLDER
MP3
3
DISC
JPEG
folder name
folder name
folder name
1
2
3
4
PLAY
PLAY
NORMAL
folder name
3
file name
file name
file name
1
2
1
3
MENU
MODE
OK
1/
2
PLAY
folder name
1
To switch “NORMAL” or “SMALL”.
2
To select a desired MP3 or JPEG file from the file list.
SMALL
2
or
OK
or
PLAY
or
or
NORMAL:
OK
To display the image at 100% of the picture size.
SMALL:
To display the image at 95% of the picture size.
Note:
Press [RETURN] to exit.
3
•
To cancel dual playback, press [DISC MENU] again at step 1.
RETURN
• If you press [PLAY B] directly after you inserted a disc which
contains both MP3 and JPEG files and if the “DUAL PLAYBACK”
setting is “ON”, dual playback will start automatically.
• If you press [g] or [h] during dual playback, a JPEG file will
be paused.
Note:
•
The setting screen will not be displayed while in the stop mode
or from the file list.
• Zooming or rotating a JPEG file during dual playback may cause
an intermittent sound.
• Depending on the data size of each file, dual playback may not
function properly. (Refer to “Applicable JPEG file” on page 12.)
• This feature may have no effect on some files (e.g. Files with
small picture size).
• The default setting is “NORMAL”.
Folder Playback
Transition Mode
This unit allows you to play back all the files and tracks contained
in one selected folder automatically.
If the folder contains both MP3 and JPEG files, the dual playback
will begin automatically within that folder.
You can switch to the transition mode for JPEG files during
playback.
Available only when “DUAL PLAYBACK” is “ON”. Refer to pages
18-22 on how to set “DUAL PLAYBACK” to “ON” or “OFF”.
During playback, press [MODE] repeatedly until “
”
1
2
appears.
CUT IN/OUT
PLAY
Press [STOP C] once to stop MP3
or JPEG playback.
1
FILE LIST
DISC NAME
FOLDER
MP3
3
MODE
JPEG
folder name
folder name
folder name
1
2
3
4
STOP
folder name
3
file name
file name
file name
1
2
1
3
To switch “CUT IN/OUT” or “FADE IN/OUT”.
OK
1/
2
PLAY
folder name
1
File list will appear.
or
OK
FADE IN/OUT
or
Press [MODE] once.
2
CUT IN/OUT:
The entire image appears in one time.
FADE IN/OUT:
FOLDER LIST
DISC NAME
FOLDER
folder name
folder name
folder name
folder name
ALL
1
MODE
2
3
4
The image appears gradually and then disappears.
Folder list will appear.
OK
1/
1
PLAY
folder name
1
Press [RETURN] to exit.
3
RETURN
To select a desired folder from the folder list.
3
Note:
PLAY
•
The transition mode cannot be switched when it is stopped, or
from the file list screen or the picture CD menu screen.
or
or
OK
• The default setting is “CUT IN/OUT”.
Note:
•
To cancel folder playback, press [MODE] again at step 2.
• If you press [g] or [h] during folder playback, a JPEG file
will be paused.
• Zooming or rotating a JPEG file during folder playback may
cause an intermittent sound.
• Depending on the data size of each file, folder playback may not
function properly. (Refer to “Applicable JPEG file” on page 12.)
–
–
13
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display
You can check the information about the current disc by pressing [DISPLAY] on the remote control.
appears only in a case
multi-angle is available on the
DVD.
DISPLAY
DISPLAY
current playback status
current playback status
4/12 0:03:21 - 0:02:15
T
1
2
11/16 0:00:00 - 0:03:30
1
remaining time of the current track
elapsed time of the current track
remaining time of the current
chapter
TR(Track):
elapsed time of the current
chapter
current track number / total tracks
DISPLAY
ALL:
current track number / total tracks
CH(Chapter):
current chapter number /
total chapters
4/12 0:13:45 - 0:45:40
T
current repeat setting, if active
T:
Track repeat
DISPLAY
A: All Tracks repeat
B: A-B repeat
A
1/3 0:00:00 - 1:23:45
2
3
remaining time of the entire disc
elapsed time of the entire disc
remaining time of the current title
elapsed time of the current title
TT(Title):
current title number / total titles
DISPLAY
current HDMI status
• image output / resolution of image
• sound output format
• maximum number of audio
channels
layer numbers, appears only
when playing back a 2-layered
disc.
DISPLAY
VIDEO INFO.
AUDIO INFO.
MAX CHANNEL
:
:
:
YCbCr/1080i
BITSTREAM
2ch
3
T
L1
L0:
L1:
Layer 0 is in playback
Layer 1 is in playback
DISPLAY
current repeat setting, appears
only when the repeat setting is
active.
4
C: Chapter repeat
T:
Title repeat
B: A-B repeat
Note:
A
• For audio CD, when you are playing back a disc in program or random
2
mode,
PROGRAM (or RANDOM) will be displayed instead of
.
bit rate: the amount of audio and
video data currently being read
•
PBC is displayed when you play back the video CD with PBC function.
DISPLAY
current HDMI status
• image output / resolution of image
• sound output format
• maximum number of audio
channels
VIDEO INFO.
AUDIO INFO.
MAX CHANNEL
:
YCbCr/1080i
BITSTREAM
2ch
4
5
:
:
DISPLAY
current playback status
TRACK 01
1
2
the name of the file currently in
playback will be displayed.
DISPLAY
DISPLAY
TR(Track):
current track number / total tracks
1/36 0:01:15
T
current repeat setting, if active
T:
Track repeat
G: Group (folder) repeat
A: Disc repeat
elapsed playing time of the
current track
DISPLAY
PROGRAM
RANDOM
3
or
(Only when you are playing back a disc in program or random
mode.)
DISPLAY
current HDMI status
• image output / resolution of image
VIDEO INFO.
AUDIO INFO.
MAX CHANNEL
:
:
:
YCbCr/1080i
BITSTREAM
2ch
4
5
• sound output format
• maximum number of audio
channels
DISPLAY
Note:
•
When the “DUAL PLAYBACK” is “ON”, MP3 and JPEG file name
will be displayed.
–
–
14
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Search Functions
Search function does not work during programmed or random playback.
Using Track Search
Using Time Search
Press [SEARCH].
Press [SEARCH] repeatedly until the time search display
1
1
appears.
/29
TOTAL 1:29:00
PLAY
SEARCH
SEARCH
Select track number by using [the Number buttons] within 30
2
Select a desired disc time by using [the Number buttons]
2
1
4
7
2
5
8
0
3
seconds.
1
4
7
2
5
8
0
3
within 30 seconds.
6
/29
6
TOTAL 1:29:00
9
9
+10
+10
•
•
For the disc with less than 10 tracks, press the track number directly.
For discs with more than 10 but less than 99 tracks, to play back
single-digit track, press [0] first, then the track number (e.g., for track 3,
press [0], [3]). To play back a double-digit track, press the track number.
For discs with more than 100 tracks, to play back a single or a
double-digit track, press [0] first, then the track number (e.g., for track 3,
press [0], [0], [3], and for track 26, press [0], [2], [6]). To play back a
triple-digit track, press the track number.
Note:
• When there is no need to enter a number, “0” appears automatically.
For example, “0: 0_: _ _” appears in the time search display if the
total time of the title or track is less than 10 minutes.
• Press [CLEAR] to erase the incorrect input at step 2.
• For audio CD, time search is not available for programmed and
random playback.
•
• Time search is not available when you play back the video CD with
PBC function.
Using [PREV H], [NEXT G]
Press [PREV H], [NEXT G] during playback.
1
Marker Setting
Current Track
(TR)
PLAY
NEXT
PREV
TR 1 TR 2 TR 3 TR 4
PREV
NEXT
This function allows you to assign a specific point on a disc to be
called back later.
Note:
To set a marker
• [+10] can also bring the track search display, except for the disc
with less than 10 tracks. For such a disc, track search can be done
by just pressing track number.
Press [SEARCH] repeatedly until the marker display
1
appears.
• For audio CD and MP3, track search is not available for
programmed and random playback.
• Track search is not available when you play back the video CD with
PBC function.
PLAY
SEARCH
Select a marker.
2
Using Title / Chapter Search
or
Press [OK].
3
OK
Press [SEARCH] once for the chapter search.
Press [SEARCH] twice for the title search.
1
To return to the marker later
PLAY
/12
Press [SEARCH] repeatedly until the marker display
1
SEARCH
appears.
Select title/chapter number by using [the Number
2
SEARCH
buttons] within 30 seconds.
1
4
7
2
5
8
0
3
/12
Select the marker.
6
2
9
or
+10
Press [OK] at the desired marker.
3
Using [PREV H], [NEXT G]
OK
Press [PREV H], [NEXT G] during playback.
1
Current Chapter
(CH)
To exit the marker screen
CH 1 CH 2 CH 3 CH 4
PLAY
NEXT
PREV
RETURN
Press [RETURN].
1
PREV
NEXT
or
Current Title
(TT)
Note:
• The marker display will disappear in about 30 seconds when
there is no output.
TT 1 TT2 TT3 TT4
PREV
NEXT
• To clear a marker, select the marker to be cleared at step 2 in
the section “To set a marker” or “To return to the marker later”
and then press [CLEAR].
(If the disc has no chapters)
Note:
• Opening the disc tray or turning off the power will erase all
markers.
• Depending on the disc being played back, this function can
also be performed by directly entering the desired chapter
number with [the Number buttons]. Refer to the manual
accompanying the disc.
• Selecting “AC” at step 2 in the section “To set a marker” or
“To return to the marker later” will also erase all markers.
• Marker search is not available when you play back the video
CD with PBC function.
–
–
15
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat / Random / Programmed Playback
Press [MODE] twice.
Repeat Playback
1
2
RANDOM
CD-DA
TOTAL 0:45:55
STOP
RANDOM PROGRAM
--no indication--
MODE
Repeat function is available only during playback.
PLAY
Press [REPEAT] during playback.
1
e.g.) CD
PLAY
Press [PLAY B] to start random playback.
REPEAT
e.g.) DVD
PLAY
Each time you press [REPEAT], repeat function changes as
example below.
(repeat off)
OFF
Note:
• To repeat the current track in the random mode, press [REPEAT]
repeatedly until “ TRACK” appears during playback.
• To repeat the entire random selections, press [REPEAT] repeatedly
until “ ALL” appears during playback.
(current chapter repeat)
(current title repeat)
CHAPTER
TITLE
• During random playback, you cannot go back to the previous
track.
• Random playback of MP3 or JPEG is not available while “DUAL
PLAYBACK“ is “ON”.
(repeat off)
OFF
Programmed Playback
(current track repeat)
(entire disc repeat)
TRACK
ALL
You may determine the order in which tracks will play back.
OFF
(repeat off)
Press [MODE] once.
1
CD-DA
TOTAL 0:00:00
TRACK
GROUP
ALL
(current file repeat)
(current folder repeat)
(entire disc repeat)
STOP
MODE
OK
e.g.) CD
Note:
Using [K / L] to select desired
2
3
• Repeat setting (except “ALL”) will be cleared when moving to
another title, chapter, track/file or folder.
• This function is not available with some discs or during repeat
A-B playback.
track. Press [OK].
CD-DA
TOTAL 1:03:30
1
5
3:30
5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
2/3
OK
or
OK
• Repeat playback is not available when you play back the video
CD with PBC function.
• Up to 99 tracks can be programmed.
• If eight or more tracks were in a program, use
[PREV H], [NEXT G] to see all the tracks.
• While an MP3 or JPEG folder is open:
Repeat A-B Playback
–Press [B] when you want to go to the next hierarchy.
–Press [s] when you want to go back to the previous
hierarchy (except for the top hierarchy).
Repeat function is available only during playback.
Press [A-B REPEAT] at your desired starting point (A).
Press [PLAY B] to start programmed playback.
1
A-
PLAY
PLAY
A-B
REPEAT
Note:
Press [A-B REPEAT] at your desired ending point (B).
2
• Press [CLEAR] at step 2 to erase the most recently entered
track.
A-B
A-B
• To erase all programmed tracks at once, select “ALL CLEAR’’
and press [OK] at step 2.
• While a program is being played back, [STOP C] works as
follows;
- Press [STOP C] and [PLAY B] next, so that the
programmed playback restarts. (CD playback restarts from
the current point. MP3 or JPEG playback restarts from the
beginning of the current file.)
REPEAT
•
Point B should be in the same title or track as point A.
Note:
• To exit the sequence, press [A-B REPEAT] so that “OFF”
appears.
- Press [STOP C] twice and [PLAY B] next, so that playback
restarts from the first track in the original order. However,
your programmed playback can be restarted when you
follow the above steps. (Your programs are still stored until
either the disc tray is open or power is turned off.)
• To repeat the current track in the program, press [REPEAT]
• To cancel point A, press [CLEAR] at step 1.
• This function is not available in the other repeat modes.
Random Playback
repeatedly until
appears during playback.
“
TRACK’’
• To repeat the entire program, press [REPEAT] repeatedly until
“
ALL’’ appears during playback.
• Programmed playback of MP3 or JPEG is not available while
This function shuffles the playing order of tracks instead of
playback in sequence.
“DUAL PLAYBACK“ is “ON”.
–
–
16
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Settings
Subtitle Language
Camera Angles
This unit allows you to select a subtitle language (if available)
Some DVD may contain scenes which have been shot
simultaneously from various angles. You can change
the camera angle if
If the “ANGLE ICON” is set to “OFF” in “OTHERS”
menu, will not appear. Refer to pages 18-22.
during DVD playback.
appears on the TV screen.
Press [SUBTITLE] during playback.
1
PLAY
1.ENG/6
SUBTITLE
Press [ANGLE] during playback.
1 / 8
1
PLAY
Each time you press [SUBTITLE], subtitle language
changes as example below.
ANGLE
OFF
ENG
FRE
(no subtitles)
Each time you press [ANGLE] or [s / B], camera angle
changes.
(English subtitles)
(French subtitles)
Black Level Setting
Adjust the black level to make the dark
areas of the TV picture brighter.
To cancel subtitle
Press [MODE] during playback.
1
2
ON
PLAY
Press [SUBTITLE] during playback.
1
1.ENG/6
MODE
PLAY
Press [OK] to adjust
the black level.
OFF
OK
SUBTITLE
Press [s / B] to set subtitle to “OFF”.
2
ON: makes the dark areas brighter.
OFF
OFF: shows the original picture as recorded.
or
RETURN
Press [RETURN] to exit.
3
Note:
Stereo Sound Mode
• If your language is not shown after pressing [SUBTITLE] several times,
the disc may not have that language. However, some discs have the
subtitle language setting on the disc menu. (Operation varies depending
on the discs, so refer to the manual along with the disc.)
This unit allows you to select a sound mode
during CD playback.
• When “NOT AVAILABLE” appears on the TV screen, it means no subtitle
is recorded on the scene.
Press [AUDIO] during CD playback.
1
PLAY
STEREO
• If you choose a language that has a 3-letter language code, the code will
be displayed every time you change the subtitle language setting. If you
choose any other languages, ‘---’ will be displayed instead. Refer to page 24.
• Some discs will only allow you to change the subtitle from the disc
menu. Refer to the manual accompanying the discs for details.
AUDIO
Each time you press [AUDIO], sound mode changes as example below.
STEREO
L-ch
(right and left channels are active)
(left channel is active)
Audio Language
R-ch
(right channel is active)
This unit allows you to select an audio language (if multiple
languages are available) during DVD playback.
Virtual Surround
Press [AUDIO] to change audio language.
1
1.ENG Dolby D 3/2.1ch 48k/3
PLAY
You can enjoy stereophonic virtual world on your existing 2
channel stereo system.
AUDIO
Each time you press [AUDIO], the audio language changes
as example below.
Press [MODE] twice (once for CD and MP3) during
1
playback.
ENG
SPA
FRE
(English audio)
(Spanish audio)
(French audio)
PLAY
OFF
MODE
Press [OK] for the desired effect.
2
1
OK
1: natural effect
2: emphasized effect
OFF: no effects (original sound)
Note:
RETURN
Press [RETURN] to exit.
• If your language is not shown after pressing [AUDIO] several
times, the disc may not have that language. However, some discs
allow audio language setting on the disc menu. (Operation varies
depending on the disc, so refer to the manual along with the disc.)
• When “OFF” appears on the TV screen, it means audio language is
not available.
3
Note:
•For audio CD and video CD, virtual surround will not be
effective if the sound mode is set to something other than
“STEREO”. Refer to “Stereo Sound Mode”.
• Some discs will only allow you to change the audio setting from the
disc menu. Refer to the manual accompanying the discs for details.
•For DVD, when playing back 96kHz with virtual surround
function, the sound will be down sampled to 48kHz.
–
–
17
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setting
QUICK Menu
You can select the “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE”, “HDMI MODE” or “DOLBY DIGITAL” from “QUICK” menu quickly.
1 Press [SETUP] in the stop mode.
2 Select the desired item.
STOP
SETUP
or
SETUP menu
Confirm that “QUICK” is selected.
OK
QUICK SETUP
A
B
C
page 18
page 19
page 20
Step 5
Step 5
Step 5
PLAYER MENU
TV ASPECT
ENGLISH
4:3 LETTER BOX
OFF
PROGRESSIVE
HDMI MODE
QUICK SETUP
480p
BITSTREAM
DOLBY DIGITAL
PLAYER MENU
TV ASPECT
ENGLISH
4:3 LETTER BOX
OFF
PROGRESSIVE
HDMI MODE
480p
DOLBY DIGITAL
BITSTREAM
OK
OK
• Refer to the sections “PLAYER MENU”, “TV ASPECT”,
“PROGRESSIVE”, “HDMI MODE” or “DOLBY DIGITAL” section on pages 18-20.
CUSTOM Menu
You can change the settings of the unit.
• QUICK on pages 18-20 indicates DVD setting menus also accessible from “QUICK” menu.
1 Press [SETUP] in the stop mode.
2 Select “CUSTOM”.
3 Select the desired item.
STOP
SETUP
OK
or
or
SETUP menu
OK
LANGUAGE
QUICK SETUP
QUICK SETUP
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
PLAYER MENU
TV ASPECT
ENGLISH
4:3 LETTER BOX
OFF
PLAYER MENU
TV ASPECT
PROGRESSIVE
HDMI MODE
DOLBY DIGITAL
OK
ENGLISH
4:3 LETTER BOX
OFF
SUBTITLE
DISC MENU
PLAYER MENU
PROGRESSIVE
HDMI MODE
480p
480p
OK
DOLBY DIGITAL
BITSTREAM
BITSTREAM
OK
LANGUAGE menu
DISPLAY menu
AUDIO menu
PARENTAL menu
OTHERS menu
AUDIO
DRC
DOWN SAMPLING ON
DOLBY DIGITAL
HDMI AUDIO
OTHERS
DISPLAY
LANGUAGE
PASSWORD
Enter current password.
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
TV ASPECT
4:3 LETTER BOX
AUTO
OFF
ON
ANGLE ICON
AUTO POWER OFF ON
DUAL PLAYBACK
SLIDE SHOW
ON
SUBTITLE
DISC MENU
PLAYER MENU
STILL MODE
PROGRESSIVE
HDMI MODE
BITSTREAM
ON
OFF
5sec
480㨜
OK
OK
OK
OK
OK
241)4'55+8'ꢀ/1&'ꢀꢀ#761ꢁ
FORMAT
RGB RANGE
RGB
NORMAL
page 18
pages 19-20
page 20
page 21
page 22
A
B
C
D
E
LANGUAGE Setting
Follow steps 1 to 3 in the “CUSTOM Menu” section above.
A
4 Select the desired item.
5 Select the desired language.
6 To exit the menu
OK
SETUP
or
or
OK
LANGUAGE menu
AUDIO: *1 *2
AUDIO
Note:
(Default: ORIGINAL)
ORIGINAL
*1
ENGLISH
FRENCH
Sets the audio
language.
• Language options are not available
with some discs.
• If “OTHER” is selected on “AUDIO”,
“SUBTITLE” or “DISC MENU” screen,
press 4-digit number to enter the code
for the desired language. Refer to the
“Language Code List” on page 24.
• Only the languages supported by the
disc can be selected.
*2
• “LANGUAGE” setting for “AUDIO”
and “SUBTITLE” are not available with
some discs. Then use [AUDIO] and
[SUBTITLE]. Refer to page 17.
LANGUAGE
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
SUBTITLE: *1 *2
(Default: OFF)
Sets the subtitle
language.
SUBTITLE
DISC MENU
PLAYER MENU
SUBTITLE
OFF
ENGLISH
FRENCH
OK
DISC MENU: *1
(Default: ENGLISH)
Sets the language for
DVD menu.
PLAYER MENU: QUICK
(Default: ENGLISH)
Sets the language for
the on-screen display.
DISC MENU
ENGLISH
FRENCH
Note:
• In “QUICK” menu, “PLAYER
MENU”, “TV ASPECT”,
SPANISH
“PROGRESSIVE”, “HDMI MODE” or
“DOLBY DIGITAL” are available.
“QUICK “ menu consists of the
setting menu frequently used,
and they are accompanied with
QUICK . You can make all settings
in “CUSTOM” menu.
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
–
–
18
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY Setting
B
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 18.
Select the desired item.
4
5
6
To exit the menu
QUICK
TV ASPECT:
(Default: 4:3 LETTER BOX)
See note on the right.
SETUP
or
Select the
desired
TV ASPECT
TV ASPECT
STILL MODE
PROGRESSIVE
HDMI MODE
PROGRESSIVE MODE
FORMAT
4:3 LETTERBOX
AUTO
OK
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
setting.
Note:
OFF
480p
AUTO 1
RGB
TV ASPECT:
DISPLAY menu
16:9 SQUEEZE
• Select “4:3 LETTER BOX”, so that
black bars may appear on the
top and bottom of the screen.
• Select “4:3 PAN & SCAN” for a
full height picture with both
sides adjusted.
or
RGB RANGE
NORMAL
OK
DISPLAY
TV ASPECT
4:3 LETTER BOX
AUTO
OFF
STILL MODE
PROGRESSIVE
HDMI MODE
STILL MODE: (Default: AUTO)
See note on the right.
STILL MODE
• Select “16:9 WIDE” if a wide-
screen TV is connected to this
unit.
• Select “16:9 SQUEEZE” when the
TV screen is too large horizontally
at “16:9 WIDE” setting and when
it is possible to adjust the screen
size using the TV’s controls.
480p
Select the
desired
OK
PROGRESSIVE MODE AUTO1
FORMAT
RGB RANGE
RGB
NORMAL
TV ASPECT
STILL MODE
PROGRESSIVE
HDMI MODE
PROGRESSIVE MODE
FORMAT
4:3 LETTERBOX
AUTO
AUTO
FIELD
FRAME
setting.
OFF
480p
AUTO 1
RGB
OK
or
RGB RANGE
NORMAL
STILL MODE:
• Select “AUTO” usually.
page 20
OK
• If you select “AUTO”, it automat-
ically selects the best resolution
setting (“FRAME” or “FIELD”)
based on the data characteris-
tics of the pictures. (default)
• If you select “FIELD”, the picture
in the still mode will be stabilized.
• If you select “FRAME”, the
picture in the still mode will be
highly defined.
• An individual picture on TV
screen is called a “frame”, which
consists of two separate images
called as “field”.
QUICK
HDMI MODE:
(Default: 480p)
See note on the right.
Select the
desired
HDMI MODE
TV ASPECT
STILL MODE
PROGRESSIVE OFF
4:3 LETTERBOX
AUTO
480p
780p
1080i
1080p
setting.
OK
HDMI MODE
PROGRESSIVE MODE
FORMAT
480p
AUTO 1
RGB
or
RGB RANGE
NORMAL
OK
• Some pictures may be blurred
at the “AUTO” setting in the still
mode due to their data charac-
teristics.
PROGRESSIVE MODE: (Default: AUTO1)
See note on the right.
Select the
PROGRESSIVE MODE
desired
setting.
TV ASPECT
STILL MODE
PROGRESSIVE
HDMI MODE
PROGRESSIVE MODE
FORMAT
4:3 LETTERBOX
AUTO
OFF
480p
AUTO 1
RGB
HDMI MODE:
AUTO1
AUTO2
VIDEO
• 480p: Video output from the
HDMI OUT jack at 480p
• 720p: Video output from the
HDMI OUT jack at 720p
• 1080i: Video output from the
HDMI OUT jack at 1080i
• 1080p: Video output from the
HDMI OUT jack at 1080p
• When the HDMI/DVI video can
be output, the setting change
can be done.
or
OK
RGB RANGE
NORMAL
OK
FORMAT: (Default: RGB)
See note on the right.
4:3 LETTERBOX
AUTO
OFF
480p
AUTO1
TV ASPECT
STILL MODE
PROGRESSIVE
HDMI MODE
PROGRESSIVE MODE
FORMAT
4:3 LETTERBOX
AUTO
OFF
480p
AUTO 1
RGB
• If the TV is not compatible with
newly selected HDMI output
mode, press and hold [PLAY B]
on the front of the unit for more
than 5 seconds to reset the
setting to default.
YCbCr
NORMAL
RGB RANGE
NORMAL
OK
PROGRESSIVE MODE:
• You can select a mode below
for the progressive scan output.
• AUTO1: mode suitable for
images on the film
RGB RANGE: (Default: NORMAL)
See note on the right.
4:3 LETTERBOX
AUTO
OFF
480p
AUTO1
TV ASPECT
STILL MODE
PROGRESSIVE
HDMI MODE
PROGRESSIVE MODE
FORMAT
4:3 LETTERBOX
AUTO
OFF
480p
AUTO 1
RGB
material.
• AUTO2: mode for images on the
material of 30-frame
film.
RGB
ENHANCED
RGB RANGE
NORMAL
• VIDEO: mode for video
material.
OK
FORMAT:
• Select an HDMI output mode
between “YCbCr” and “RGB”.
• When the connected device
is not compatible with YCbCr,
HDMI signal is output as RGB
regardless of the setting.
• This setting is effective only
when you use the HDMI con-
nection.
RGB RANGE:
• Select a HDMI picture mode
between “NORMAL” and
“ENHANCED”.
• Select “ENHANCED” if the black-
white contrast is not clear.
• This setting is effective only for
HDMI RGB output.
–
–
19
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Follow steps 1 to 3 in the “CUSTOM menu” section on page 18 and step 4 on page 19.
Note:
5
QUICK
If “PROGRESSIVE” is “ON”,
this message appears:
PROGRESSIVE:
PROGRESSIVE:
(Default: OFF)
• You can set “PROGRESSIVE”
to “OFF” either in “DISPLAY”
menu or by pressing and
holding [PLAY B] on the
front of the unit for more
than 5 seconds.
• When “PROGRESSIVE” is
“ON”, video signals from
VIDEO OUT and S-VIDEO OUT
jacks will be distorted or not
be output at all.
See note on the right.
Select “YES”.
Before proceeding…
1. Make sure your TV has progressive scan.
2. Connect with component video cable
4:3 LETTERBOX
AUTO
ON
480p
AUTO 1
RGB
TV ASPECT
STILL MODE
4:3 LETTERBOX
AUTO
SETUP
NOTE: If there is no picture or picture is
distorted after selecting “YES”,
wait about 15 seconds for auto recovery.
PROGRESSIVE OFF
or
Activate Progressive?
NO
HDMI MODE
PROGRESSIVE MODE
FORMAT
480p
AUTO 1
RGB
YES
SELECT:
K
/
L
SET:OK
NORMAL
RGB RANGE
NORMAL
OK
If there is no picture or you
do not press any buttons
for 15 seconds, Progressive
Scan will switch to“OFF”.
Select “YES”.
6 To complete the
“PROGRESSIVE”
setting
OK
Confirm again to use progressive scan.
If Picture is good, Select “YES”.
or
OK
NO
YES
SET:OK
SELECT:
K
/
L
AUDIO Setting
C
Choose the appropriate audio setting for your device. It only affects during the playback of DVD. Follow steps 1 to 3 in the
“CUSTOM Menu” section on page 18.
4 Select the desired item.
5
6 To exit the menu
DRC (Dynamic Range Control): (Default: ON)
Set to “ON” to compress the range between soft and loud
sounds.
SETUP
or
DRC
ON
OFF
DOWN SAMPLING ON
ON
DOLBY DIGITAL
HDMI AUDIO
BITSTREAM
ON
BITSTREAM
ON
Note:
OK
DRC:
AUDIO menu
• This function is available
only on the discs which
are recorded in the Dolby
Digital format.
DOWN SAMPLING: (Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
AUDIO
DRC
ON
DOWN SAMPLING ON
DOWN SAMPLING:
DRC
ON
ON
DOLBY DIGITAL
HDMI AUDIO
BITSTREAM
ON
DOWN SAMPLING ON
OFF
• When playing back a
96kHz disc with the
OK
DOLBY DIGITAL
HDMI AUDIO
BITSTREAM
ON
BITSTREAM
ON
copyright protection, or
when virtual surround is
set to “1” or “2”, the sound
will be down sampled at
48kHz even if the “DOWN
SAMPLING” is set to “OFF”.
• When the HDMI sound
can be output, the setting
change cannot be done.
OK
Note:
DOLBY DIGITAL: QUICK
(Default: BITSTREAM)
• In “QUICK” menu, “PLAYER
MENU”, “TV ASPECT”,
Set to “BITSTREAM” when the unit is connected to a Dolby Digital
decoder.
“PROGRESSIVE” “HDMI
•
•
BITSTREAM: outputs Dolby Digital signals.
MODE” or “DOLBY DIGITAL”
are available. “QUICK” menu
consists of the setting menu
frequently used, and they
are accompanied with QUICK
. You can make all settings in
“CUSTOM” menu.
PCM: converts the Dolby Digital into PCM (2 channel).
•
This function is available
only on digital
DRC
ON
ON
ON
PCM
ON
outputting of a disc
recorded in 96kHz.
DOWN SAMPLING ON
DOLBY DIGITAL
HDMI AUDIO
BITSTREAM
ON
HDMI AUDIO:
• When the HDMI sound
cannot be output the
setting change cannot be
done.
OK
HDMI AUDIO:
(Default: ON)
This function is only available when you use an HDMI
connection.
•
•
ON: to output the HDMI sound.
OFF: not to output the HDMI sound.
DRC
ON
ON
DOWN SAMPLING ON
ON
DOLBY DIGITAL
HDMI AUDIO
BITSTREAM
ON
BITSTREAM
OFF
OK
–
–
20
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PARENTAL Setting
This function prevents unit from playing material inappropriate for children.
D
Parental Levels
Parental level allows you to set the rating levels of your DVD software. Playback will stop if the ratings exceed the levels you set. Follow
steps 1 to 3 in the “CUSTOM Menu” section on page 18.
4 Enter your desired 4-digit
5 Select “PARENTAL
6 Select the desired
7 To exit the menu
password (expect for 4737).
LEVEL”.
level.
SETUP
or
or
1
4
7
2
5
8
0
3
6
9
PARENTAL LEVEL
ALL
OK
OK
OK
PARENTAL LEVEL
PASSWORD CHANGE
ALL
8 [ADULT]
7 [NC-17]
6 [R]
PARENTAL menu
CONTROL LEVELS
• ALL:
all parental locks are canceled.
• Level 8:
DVD software of any grades (adult/general/children) can be played
PASSWORD
back.
• Levels 7 to 2: only DVD software intended for general use and children can be played
back.
• Level 1:
OK
only DVD software intended for children can be played back, with
or
those intended for adult and general use prohibited.
TIPS FOR LEVELS
• 8 [ADULT]:
If you have set a password
already, enter the current 4-digit
password.
DVD software of any grades (adult/general/children) can be played
back.
• 7 [NC-17]:
no one under 17 admitted
PARENTAL menu
• 6 [R]: restricted; under 17 requires accompanying parent or adult guardian
• 5 [PGR]:
• 4 [PG13]:
• 3 [PG]:
• 2 [G]:
parental guidance recommended
unsuitable for children under 13
parental guidance suggested
general audience
• 1 [KID SAFE]: suitable for children
OK
Note:
• Some DVD-video may not respond to “PARENTAL“ setting. Make sure this function
works with your DVD-video.
• The resume information will be cleared if you change the parental level when the
resume information is on.
To Change the Password for Parental Controls
You can change your password for parental controls. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 18.
4 Enter current 4-digit
5 Select “PASSWORD
6 Enter your new 4-digit
password (except for
4737).
7 To exit the menu
password.
CHANGE”.
SETUP
1
4
7
2
5
8
0
3
6
or
1
4
7
2
5
8
0
3
OK
OK
6
9
9
PARENTAL LEVEL
PASSWORD CHANGE
ALL
Note:
• Record the password
in case you forget it.
• If you forget the
PARENTAL menu
password, press [4],
[7], [3], [7] at step 4,
then enter your new
password. Password
will be cleared and
parental levels will be
set to “ALL”.
PASSWORD
OK
OK
–
–
21
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS Setting
E
You can change the other functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 18.
4 Select the desired item.
5
6 To exit the menu
ANGLE ICON: (Default: ON)
SETUP
Set to “ON” to display
when multiple camera
or
angles are available during DVD playback.
OFF
ON
ANGLE ICON
AUTO POWER OFF ON
ON
OTHERS menu
OK
OTHERS
AUTO POWER OFF: (Default: ON)
Set to “ON” to turn this unit off automatically after 30
minutes of no use.
ANGLE ICON
AUTO POWER OFF ON
DUAL PLAYBACK
SLIDE SHOW
ON
OFF
5sec
OK
ANGLE ICON
ON
ON
AUTO POWER OFF ON
OFF
OK
DUAL PLAYBACK: (Default: OFF)
Set to “ON” to play back MP3 files and JPEG files simul-
taneously.
ON
ON
ON
5sec
ANGLE ICON
AUTO POWER OFF
DUAL PLAYBACK
SLIDE SHOW
ON
ON
OFF
5sec
OK
SLIDE SHOW: (Default: 5sec)
Set the display time or set to display an image for
each MP3 sound file playback.
Select the
desired
ANGLE ICON
AUTO POWER OFF ON
DUAL PLAYBACK OFF
ON
SLIDE SHOW
5sec
10sec
MUSIC
setting.
SLIDE SHOW
5sec
or
OK
OK
–
–
22
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset to the Default Setting (Except for PARENTAL Setting)
1 Press [SETUP] in the
2 Select “INITIALIZE”.
3 Select “YES”.
4 To exit the menu
stop mode.
STOP
SETUP
SETUP
or
or
OK
OK
SETUP menu
Press
Note:
twice.
INITIALIZE
Initialize?
NO
•
When you do not wish
to initialize, select
“NO” at step 3.
QUICK SETUP
QUICK SETUP
PLAYER MENU
TV ASPECT
ENGLISH
4:3 LETTER BOX
OFF
PLAYER MENU
TV ASPECT
ENGLISH
4:3 LETTER BOX
OFF
PROGRESSIVE
HDMI MODE
PROGRESSIVE
HDMI MODE
YES
OK
480p
480p
DOLBY DIGITAL
BITSTREAM
DOLBY DIGITAL
BITSTREAM
OK
OK
INFORMATION
Troubleshooting Guide
If this unit does not perform properly when operated as instructed in this manual. Refer to the following:
Problem
No power.
Corrective action
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
This unit does not respond to • Check if the power plug is connected to an AC outlet.
the remote control.
• Check the batteries in the remote control.
• Aim the remote control directly at the infrared sensor window. If necessary, remove all the obstacles
between the sensor and the remote control.
• You have to be within 23 feet (7m) of this unit.
• Tune your radio to an empty AM station so that you hear a lot of static. Turn up the volume, then
if you hear some signal sound from the radio in response to your pressing buttons on the remote
control, the remote control is working.
• Press and hold any button on remote control toward a digital camera. The remote control is working
if you confirm infrared light through the digital camera.
Poor picture or noise.
No picture.
• Interference signal may be received. Change the position and direction of the unit.
• Connect the video cable firmly.
• Insert a correct video disc that can be played back on this unit.
• Set “PROGRESSIVE” correctly in “DISPLAY” menu. Turn it on only if your TV has progressive scan and
you are using the component video connections between the unit and the TV. Disable progressive
scan for all other connections. Refer to pages 6-7.
No sound/image from HDMI • Check the HDMI connection. (Check the status of the HDMI related indications.)
connection.
• Check whether the connected monitor device or other device supports HDCP. (This unit will not
output a video signal unless the other device supports HDCP.)
• Check the setting of HDMI.
• Check whether the output format of this unit (HDMI FORMAT) matches the supported input format of
other connected device.
• If the unit is connected to the unauthorized display device with an HDMI cable, the audio/video signal
may not be output when playing back a commercial DVD-video.
Distorted picture.
• Connect this unit directly to the TV.
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction. Refer to page 11.
• Check if “PROGRESSIVE” is set correctly according to your TV. Refer to pages 18-20.
Disc cannot be played back. • Insert the disc.
• Clean the disc.
• Place the disc correctly with the label side up.
• Cancel the parental lock or change the control levels.
• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
No sound.
• Connect the audio cables firmly.
• Turn on the power of the audio component.
• Correct the audio output settings.
• Correct the input settings on the audio component.
No DTS audio is output.
• This unit does not support DTS audio.
-This is not a malfunction.
Audio or subtitle language
does not match the setting.
• The selected language is not available for audio or subtitles on the DVD.
-This is not a malfunction.
The camera angle cannot be • The DVD does not contain sequences recorded from different camera angles.
changed.
-This is not a malfunction.
Audio or subtitle language
cannot be changed.
• The DVD does not contain audio source or subtitles in the selected language.
-This is not a malfunction.
“
” appears on the TV screen, • That operation is prohibited by this unit or the disc.
prohibiting an operation.
-This is not a malfunction.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for details on
correct operations.
• Playback from a desired track and random playback are not available during programmed playback.
• Some functions are prohibited on some discs.
• When playing back video CD with PBC function, some operations (e.g. select and track repeat) cannot be performed.
–
–
23
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Output signal format :
NTSC color
• Designs and specifications are subject to
change without notice.
• If there is a discrepancy between
languages, the default language will be
English.
Operating temperature :
41°F (5°C) to 104°F (40°C)
Dimensions :
Power source :
120 V AC +/- 10%, 60 Hz +/- 0.5%
Power consumption :
10W (standby : 0.8W)
W : 17.2”
(435mm)
(51mm)
H
D
: 2.1”
: 8.4”
(211mm)
Weight :
Approx 3.8lbs (1.7kg)
Language Code List
Language
Code
Language
Code
Language
Code
Language
Code
A-B
French [FRE]
Frisian
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Macedonian
Malagasy
Malay
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Siswat
6565
6557
6558
6561
5165
6567
6569
6568
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
Slovak [SLO]
Slovenian
Somali
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Malayalam
Maltese
Maori
Spanish [SPA]
Sundanese
Swahili
Marathi
Moldavian
Mongolian
Nauru
Swedish [SWE]
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
Nepali
Norwegian [NOR]
O-R
I-K
Occitan
Oriya
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Bulgarian [BUL]
Burmese
Byelorussian
Irish [IRI]
Polish [POL]
Portuguese [POR]
Quechua
Italian [ITA]
Japanese [JPN]
Javanese
C-E
Cambodian
Catalan
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
U-Z
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Chinese [CHI]
Corsican
S
Croatian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
L-N
Yiddish
Yoruba
Zulu
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
5861
5847
5868
5860
5866
F-H
Setswana
Shona
Sindhi
Faroese
Fiji
Finnish [FIN]
5261
5256
5255
Singhalese
If you choose a language that has a 3-letter language code, the code will be displayed every time you change the audio or subtitle
language setting on page 17. If you choose any other languages, ‘---’ will be displayed instead. (3-letter language code is written in
bracket.)
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect
in materials or workmanship as follows:
ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY,
AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI
AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS
AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS
WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE
CENTER.
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without
charge for one (1) year from the date of original retail purchase. Certain
parts are excluded from this warranty.
IMPORTANT:
LABOR:
FUNAI CORP. will provide the labor without charge for a period of
ninety (90) days from the date of original retail purchase.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE
OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING
THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE
REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt
or other proof of original retail purchase will be required together with the product
to obtain service under this warranty.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are
altered, replaced, defaced, missing or if service was attempted by an unauthorized
service center. This limited warranty does not apply to any product not purchased
and used in the United States.
This product is produced for home use and this warranty only covers failures due
to defects in material or workmanship which occurs during normal use. It does not
cover damage which occurs in shipment, or failures which are caused by repairs,
alterations or product not supplied by FUNAI CORP., or damage which results from
accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation,
improper maintenance, commercial use such as hotel, rental or office use of this
product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES
(EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS,
DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE
LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING
OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI,
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product
freight prepaid, in either its original packaging or packaging affording an equal
degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI CORP. will not
reimburse you for any service done by unauthorized service providers without
prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service
inquiries, please contact us at:
FUNAI CORPORATION
Customer Service
Tel :1-800-605-8610
19900 Van Ness Avenue, Torrance, CA 90501
–
–
24
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
–
–
25
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
–
–
26
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Español
Conexiones
Reproducción
1
4
Si su televisor tiene entradas de audio/
video vea la sección “Connection to
a TV” en la página 6 en el manual de
manejo. En caso contrario, vea la sección
“Connecting to RF Modulator (Not
Supplied)” en la página del frente en el
manual de manejo.
Antes:
Para abrir la
bandeja del
disco
Ponga un disco con la
etiqueta hacia arriba.
STANDBY-ON
OPEN/CLOSE
1
3
2
4
Encienda el televisor,
amplificador y
otros equipos
1
1
4
2
5
8
0
3
6
9
OPEN/CLOSE
STANDBY-ON
7
CLEAR
que puedan estar
conectados a esta
unidad. Asegúrese
que el televisor y el
sintoamplificador de
audio (no provisto)
están en el canal
correcto.
+10
NEXT
PREV
3
4
PLAY
STOP
PAUSE
TITLE
Para empezar la
reproducción
Para parar la
reproducción
Instalación de las pilas
en el control remoto
2
RETURN
PLAY
STOP
1
3
2
Soporte
Botón
(Orden alfavético)
1
4
7
2
5
8
0
3
6
Para cambiar el idioma
en la pantalla
3
• Para seleccionar directamente el capítulo o título.
• Para seleccionar directamente la canción.
9
+10
STANDBY-ON
1
Confirme que ha
seleccionado “QUICK”.
• Para mover el cursor y determinar la posición.
(CD/MP3/JPEG)
OK
• Para mover el cursor y determinar la posición.
• Para buscar en avance/retroceso por un disco.
STOP
QUICK SETUP
• Para buscar en avance/retroceso por un disco.
PLAYER MENU
TV ASPECT
PROGRESSIVE
ENGLISH
4:3 LETTER BOX
OFF
• Para empezar la reproducción en avance lento/ret- • Para empezar la reproducción en avance lento
roceso durante el modo de pausa.
durante el modo de pausa. (VCD)
HDMI MODE
480p
DOLBY DIGITAL BITSTREAM
A-B
OK
• Para repetir entre su punto A y B seleccionado. (CD/
VCD)
• Para repetir entre su punto A y B seleccionado.
REPEAT
SETUP
• Para seleccionar los ángulos de cámara en un disco. • Para girar la imagen. (JPEG).
ANGLE
• Para seleccionar “ESTÉREO”, “L-ch” o “R-ch”.
• Para seleccionar idiomas de audio en un disco.
(CD/VCD)
AUDIO
CLEAR
OK
• Para borrar los marcadores. (CD/VCD)
• Para eliminar el Nº de estado en la entrada de pro-
grama.
• Para borrar los marcadores.
• Para borrar los números mal entrados.
• Para borrar el punto para la repetición A-B.
2 Confirme que ha seleccionado
• Para borrar los números mal entrados.
• Para borrar el punto para la repetición A-B.(CD/VCD)
“PLAYER MENU”.
DISC
• Para llamar el menú en un disco.
• Para llamar la lista de archivo. (MP3/JPEG)
MENU
QUICK SETUP
• Para indicar el modo de disco actual o modo de
HDMI.
• Para indicar el modo de disco actual o modo de
HDMI.
PLAYER MENU
TV ASPECT
PROGRESSIVE
HDMI MODE
DOLBY DIGITAL BITSTREAM
ENGLISH
4:3 LETTER BOX
OFF
DISPLAY
MODE
• Para disponer el orden de reproducción o la repro-
ducción aleatoria. (CD/MP3/JPEG)
480p
OK
• Para activar/desactivar el nivel del negro.
• Para activar/desactivar el ambiental virtual.
• Para activar/desactivar el ambiental virtual. (CD/
VCD/MP3)
• Para activar/desactivar el nivel del negro. (VCD)
• Para activar el modo carrusel de diapositivas. (JPEG)
OK
OPEN/CLOSE
• Para abrir o cerrar la bandeja del disco.
• Para encender la unidad.
• Para abrir o cerrar la bandeja del disco.
• Para encender la unidad.
3 Seleccione el idioma deseado para
PAUSE
PLAY
• Para hacer una pausa en la reproducción.
• Para avanzar la reproducción un cuadro cada vez.
(VCD)
• Para hacer una pausa en la reproducción.
las indicaciones en la pantalla.
• Para avanzar la reproducción un cuadro cada vez.
• Para empezar la reproducción del disco.
• Para encender la unidad.
• Para empezar la reproducción del disco.
• Para encender la unidad.
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
or
NEXT
PREV
• Para saltar capítulos.
• Para saltar canciones.
• Para reproducir repetidamente una canción o
disco.(CD/VCD)
• Para reproducir repetidamente un capítulo o título.
• Para reproducir repetidamente una canción, grupo
o disco. (MP3/JPEG)
REPEAT
RETURN
OK
• Para volver a la operación anterior en el menú.
• Para volver a la operación anterior en el menú.
• Para buscar una canción.
• Para buscar un capítulo, título o tiempo.
• Para colocar o buscar los marcadores.
• Para buscar el tiempo.(CD/VCD)
• Para colocar o buscar los marcadores. (CD/VCD)
4 Para salir del menú.
SETUP
SEARCH
SETUP
• Para llamar el menú de ajustes de DVD.
• Para encender o apagar la unidad.
• Para llamar el menú de ajustes de DVD.
• Para encender o apagar la unidad.
• Para parar la reproducción.
STANDBY-ON
STOP
• Para parar la reproducción.
• Para seleccionar subtítulos en un disco.
• Para llamar el menú inicial en un disco.
• Para ampliar parte de la imagen. (2x/4x)
SUBTITLE
TITLE
• Para volver al archivo superior de la jerarquía más
alta en el programa y en la lista de archivo. (MP3/
JPEG)
• Para ampliar parte de la imagen. (2x) (VCD/JPEG)
ZOOM
–
–
27
ES
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Use Guide
Connections
Playback
1
4
If your TV has audio/video input jacks,
see the section “Connection to a TV” on
page 6 of the owner’s manual. If not, see
the section “Connecting to RF Modulator
(Not Supplied)” on the front page of the
owner’s manual.
Before:
To open the disc
tray
Insert a disc with label
facing up.
STANDBY-ON
OPEN/CLOSE
1
3
2
4
Turn on the TV,
amplifier and any
other device which
are connected to
this unit. Make
1
1
4
2
5
8
0
3
6
9
OPEN/CLOSE
STANDBY-ON
7
CLEAR
+10
NEXT
PREV
sure the TV and
audio receiver (not
supplied) are set to
the correct channel.
3
4
PLAY
To start playback
To stop playback
Installing the Batteries
for the Remote Control
2
STOP
PAUSE
TITLE
RETURN
PLAY
STOP
1
3
2
Disc
Button
(Alphabetical order)
1
4
7
2
5
8
0
3
6
To Change the
On-Screen Language
3
• To select chapter or title directly.
• To select track of file directly.
9
+10
STANDBY-ON
1
Confirm that “QUICK” is
selected.
• To move the cursor and determine its position.
(CD/MP3/JPEG)
OK
• To move the cursor and determine its position.
• To search forward/backward through a disc.
• To begin slow forward/reverse playback in the
pause mode.
• To search forward/backward through a disc.
• To begin slow forward playback in the pause mode.
(VCD)
STOP
QUICK SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
HDMI MODE
DOLBY DIGITAL BITSTREAM
ENGLISH
4:3 LETTER BOX
OFF
A-B
• To repeat between your chosen point A and B. (CD/
VCD)
480p
• To repeat between your chosen point A and B.
• To select camera angles on a disc.
REPEAT
OK
SETUP
• To rotate a picture of JPEG files. (JPEG)
ANGLE
• To select audio languages on a disc.
• To select “STEREO”, “L-ch” or “R-ch”. (CD/VCD)
AUDIO
CLEAR
OK
• To clear the markers. (CD/VCD)
• To clear the markers.
• To clear the numbers entered incorrectly.
• To cancel the point for A-B repeat.
• To remove status number in program input.
• To clear the numbers entered incorrectly.
• To cancel the point for A-B repeat. (CD/VCD)
2 Confirm that “PLAYER MENU” is
DISC
selected.
• To call up the menu on a disc.
• To call up the file list. (MP3/JPEG)
MENU
• To display the current disc or HDMI mode.
• To display the current disc or HDMI mode.
QUICK SETUP
DISPLAY
MODE
PLAYER MENU
TV ASPECT
PROGRESSIVE
HDMI MODE
DOLBY DIGITAL BITSTREAM
ENGLISH
4:3 LETTER BOX
OFF
• To arrange the playing order or play randomly. (CD/
MP3/JPEG)
480p
• To set black level on/off.
• To set virtual surround on/off.
• To set virtual surround on/off. (CD/VCD/MP3)
• To set black level on/off. (VCD)
OK
• To activate the slide show mode. (JPEG)
OPEN/CLOSE
OK
• To open or close the disc tray.
• To turn the unit on.
• To open or close the disc tray.
• To turn the unit on.
PAUSE
PLAY
• To pause disc playback.
• To pause disc playback.
3 Select the desired language for the
• To advance playback one frame at a time.
• To advance playback one frame at a time. (VCD)
on-screen display.
• To begin disc playback.
• To turn the unit on.
• To begin disc playback.
• To turn the unit on.
PLAYER MENU
NEXT
PREV
ENGLISH
FRANÇAIS
ESPAÑOL
• To skip chapters.
• To skip tracks or files.
or
• To play back a track or disc repeatedly. (CD/VCD)
• To play back a file, folder or disc repeatedly. (MP3/
JPEG)
• To play back a chapter or title repeatedly.
REPEAT
RETURN
• To return to the previous operation in menu.
• To return to the previous operation in menu.
OK
• To search track.
• To search time. (CD/VCD)
• To set or search the markers. (CD/VCD)
• To search chapter, title or time.
• To set or search the markers.
SEARCH
SETUP
4 To exit the menu.
SETUP
• To call up the setup menu.
• To turn the unit on or off.
• To call up the setup menu.
• To turn the unit on or off.
• To stop playback.
STANDBY-ON
STOP
• To stop playback.
• To select subtitles on a disc.
• To call up the top menu on a disc.
• To magnify part of a picture. (2x/4x)
SUBTITLE
TITLE
• To return to the top file of the highest hierarchy in
the program and file list. (MP3/JPEG)
• To magnify part of a picture. (2x) (VCD/JPEG)
ZOOM
Printed in China
E6E72UD
1VMN23650A ★★★★
Download from Www.Somanuals.com. All Manuals Search And Download.
|