Owner’s Manual
Please read before using this unit.
DDVPD/1CD7P0laMyerGXF
INSTRUCCIONES EN
ESPAÑOL INCLUIDAS.
Supplied Accessories
Contents
PRECAUTIONS
remote control (NB098UD)
AA(1.5V DC) battery x2
RCA audio/video cables
(WPZ0102TM018 /
WPZ0102LTE01)
IMPORTANT SAFETY INSTRUCTIONS ....................................... 2
About the Discs......................................................................... 5
Playable Discs...........................................................................................5
Unplayable Discs.....................................................................................5
SETUP
Owner’s Manual
owner’s manual
(1VMN27833)
Connections.............................................................................. 6
Connection to a TV.................................................................................6
HDMI Audio...............................................................................................7
HDMI Mode and Actual Output Signals .........................................7
Connection to an Audio System .......................................................8
Rear Terminals..........................................................................................8
About the Remote Control ....................................................... 9
Remote Control .......................................................................................9
Installing the Batteries for the Remote Control...........................9
Connecting to RF Modulator (Not Supplied)
If your TV has antenna in jack only, it is still possible to
connect this unit to your TV by using an RF modulator. In
this case, follow the instructions below.
1) Disconnect the power cords of the devices from the
AC outlet.
DVD FUNCTIONS
Playback .................................................................................. 10
MP3 / JPEG Playback................................................................ 11
Search Functions ..................................................................... 11
Using Track / File / Folder Search.....................................................11
Using Title / Chapter Search ..............................................................11
Using Time Search.................................................................................11
On-Screen Display ................................................................... 12
Repeat / Random / Programmed Playback ............................ 13
Repeat Playback .....................................................................................13
Repeat A-B Playback.............................................................................13
Random Playback ..................................................................................13
Programmed Playback.........................................................................13
Special Settings ....................................................................... 14
Subtitle Language..................................................................................14
Audio Language.....................................................................................14
Camera Angles........................................................................................14
Stereo Sound Mode ..............................................................................14
DVD Setting ............................................................................. 15
Language Setting...................................................................................15
Display Setting........................................................................................16
Video Setting...........................................................................................16
Audio Setting...........................................................................................17
Others Setting .........................................................................................18
2) Make the connection as illustrated below.
3) Set your RF modulator’s channel 3/4 switch to
either 3 or 4, whichever the TV channel is least used in
your area. If your RF modulator has a
modulator/antenna switch, set it according to the
manual supplied with the RF modulator.
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel as
you set the RF modulator’s channel 3/4 switch to.
For more details, follow the manual supplied with the
RF modulator.
rear of this unit
RCA video cable
rear of TV
RCA audio cable
ANT. IN
rear of your RF
VHF / UHF
modulator
antenna
RF coaxial cable
or
3
4
R
L
ANT. IN CHANNEL
AUDIO IN VIDEO IN TO TV
RF coaxial
cable
cable TV
company
Set channel 3 or 4
INFORMATION
Note:
Troubleshooting Guide ........................................................... 19
Specifications .......................................................................... 19
LIMITED WARRANTY................................................................ 20
Español .................................................................................... 23
Quick Use Guide.......................................................... Back Cover
• RF modulator is not supplied with this unit. You need to
purchase it at your local store.
• The quality of picture may become poor if this unit is
connected to an RF modulator.
If you need additional operating assistance after
reading this owner’s manual, please call
TOLL FREE : 1-800-605-8610
or visit our web site at
© 2009 Funai Electric Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.
LASER SAFETY
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION: Visible and invisible laser radiation when open and inter lock defeated. Do not stare into beam.
LOCATION: Inside, near the deck mechanism.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.
To Avoid the Hazards of Electrical Shock and Fire
• Do not handle the AC power cord with wet hands.
• Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
Location and Handling
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Dew Condensation Warning
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Note about Recycling
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
Notice for Progressive Scan Output
• Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 525p(480p)DVD player, please contact our customer service center.
EN
–
–
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TRADEMARK INFORMATION
MAINTENANCE
Servicing
HDMI, the HDMI logo and
High-Definition Multimedia
Interface are trademarks or
registered trademarks of
HDMI Licensing LLC.
• Please refer to relevant topics on the “Troubleshooting Guide”
on page 19 before returning the unit.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts inside.
Turn off, unplug the power plug, and please call our help line
mentioned on the front page to locate an authorized service
center.
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
Cleaning the Cabinet
• Wipe the front panel and other exterior surfaces of the unit
with a soft cloth.
• Never use a solvent, thinner, benzene or alcohol to clean the
unit. Do not spray insecticide liquid near the unit.
Such chemicals may discolor the surface or damage the unit.
Products that have earned ENERGY STAR® are
designed to protect the environment through
superior energy efficiency.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center to out. Do not wipe in a circular
motion.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analog records.
is a trademark of DVD Format/Logo Licensing
Corporation.
SYMBOLS USED IN THIS MANUAL
The following symbols appear in some headings in this manual.
Cleaning the Disc Lens
• If this unit still does not perform properly although you refer
to the relevant sections and to “Troubleshooting Guide” in
this owner’s manual, the laser optical pickup unit may be
dirty. Consult your dealer or an authorized service center for
inspection and cleaning of the laser optical pickup unit.
: Description refers to DVD-video.
: Description refers to audio CD.
Disc Handling
: Description refers to DVD, CD-RW/-R with MP3 files.
• When you handle a disc, hold it by its edge and try not to
touch the surface of the disc.
• Always store the disc in its protective case when not in use.
: Description refers to DVD, CD-RW/-R with JPEG
files.
© 2009 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced,
copied, transmitted, disseminated, transcribed, downloaded
or stored in any storage medium, in any form or for any
purpose without the express prior written consent of Funai.
Furthermore, any unauthorized commercial distribution of this
manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without
notice. Funai reserves the right to change the content herein
without the obligation to notify any person or organization of
such changes.
with the
design is a registered trademark of
Funai Electric Co., Ltd and may not be used in any way without
the express written consent of Funai. All other trademarks
used herein remain the exclusive property of their respective
owners. Nothing contained in this manual should be construed
as granting, by implication or otherwise, any license or right
to use any of the trademarks displayed herein. Misuse of any
trademarks or any other content in this manual is strictly
prohibited. Funai shall aggressively enforce its intellectual
property rights to the fullest extent of the law.
EN
–
–
4
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Discs
Playable Discs
Type of
Recorded
signals
Mark (logo)
Region code
Disc size
Disc types
media
DVD-Video
DVD
e.g.)
title 1
title 2
digital video
(MPEG2)
DVD-video
*1, 2, 4, 6, 8
or
chapter 2
chapter 1 chapter 2 chapter 3 chapter 4 chapter 1
5 inches
(12 cm)
or
e.g.)
title 1
title 2
chapter 2
chapter 1 chapter 2 chapter 3 chapter 4 chapter 1
3 inches
(8 cm)
digital video
(MPEG2)
or
DVD+RW
DVD+R
*1, 4, 5, 6, 7, 8
MP3/JPEG
e.g.)
MP3/JPEG
folder 1
folder 2
file 1
file 3
file 2
file 4
file 1
file 2
audio CD
*4, 6, 8
digital audio
audio CD
e.g.)
track 1
track 2
track 3
track 4
track 5
track 6
5 inches
(12 cm)
or
CD-RW
CD-R
digital audio
or
MP3/JPEG
*4, 5, 6, 7, 8
3 inches
(8 cm)
MP3/JPEG
e.g.)
folder 1
folder 2
file 1
file 3
file 2
file 4
file 1
file 2
Kodak
Picture CD
*4, 5, 6, 7, 8
JPEG
is a trademark of DVD Format / Logo Licensing Corporation.
is trademark of Eastman Kodak Company.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-video do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special
properties of discs.
*6: You can play back discs which bear the marks above. If you use non-standardized discs, this unit may not play them back. Even
if they are played back, the sound or video quality will be compromised.
3
16
*7: If the recorded portion of the disc is too small (smaller than 2- / inches (55mm) across), it may not be played back.
*8: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
Unplayable Discs
NEVER play back the following discs as malfunction may result!
DVD-RAM / DVD-audio / CD-i / photo CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-ROM for personal computers
/ CD-ROM for personal computers / HD DVD / Blu-ray Disc
On the following disc, the sound MAY NOT be heard.
super audio CD
Any other discs without compatibility indications
Note:
• Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio CD layer
cannot be delivered.
EN
–
–
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
Connections
Connection to a TV
Method 1
Method 2
Method 3*1
Method 4*2
analog audio standard picture
good picture
better picture
best audio /
picture
TV
AUDIO IN
VIDEO IN
L
COMPONENT
VIDEO IN
COMPONENT
VIDEO IN
S-VIDEO IN
HDMI IN
Y
Y
R
C
B
R
P
B
R
or
or
or
or
and
C
P
RCA audio
cable
RCA video
cable
S-video
cable
RCA component
video cable
HDMI
cable
This unit
VIDEO
S-VIDEO
OUT
OUT
COMPONENT
VIDEO OUT
AUDIO OUT
VIDEO OUT
S-VIDEO OUT
HDMI OUT
1
2
*
This unit is compatible with the progressive scan system. The feature provides you with the higher quality pictures than traditional
output system does. To utilize this feature, a component connection is required. Refer to “HDMI Video Resolution” or “Progressive”
setting on page 18 to set the video resolution.
*
Analog audio connection is not required for this connection.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note:
• Connect this unit directly to your TV. If RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy
protection system.
• Changing “Progressive” setting is not available while HDMI cable is connected.
If your TV is compatible with 525 (480) progressive scanning and you want to enjoy that high quality picture;
You must select the connection COMPONENT VIDEO OUT above and progressive scanning mode. To set the mode, set “Progressive”
to “On” in “Video” menu. Refer to pages 15-16 for more details.
• When “Progressive” is “On”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distored or not be output at all.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode and set “Progressive” to “Off” in “Video” menu or by pressing and holding [PLAY B] on the front of
the unit for more than 5 seconds.
After connecting to your TV:
You will need to switch to video input on your TV. This is usually marked TV/VIDEO, INPUT or AUX.
Please refer to your TV’s owner’s manual for details.
Input modes for common TV brands:
Listed below are inputs for common brand name TV’s.
Admiral:
Curtis Mathis:
GE:
AUX
Panasonic:
RCA:
TV/VIDEO
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
Samsung:
Sanyo:
TV/VIDEO
Hitachi:
INPUT, AUX
VIDEO
JVC:
VIDEO, VIDEO1, VIDEO2, VIDEO3
Sharp:
Sony:
Toshiba:
Zenith:
00
Kenwood:
LXI-Series:
Magnavox:
AUX
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00
AUX CHANNEL
EN
–
–
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI Audio
HDMI Audio Setting
Media
Audio Recording Format
Bistream
LPCM
Dolby Digital
LPCM
Dolby Digital
Multi PCM
2ch PCM
Multi PCM
Multi PCM
2ch PCM
2ch PCM
DVD-Video
audio CD
MP3
2ch PCM
HDMI Mode and Actual Output Signals
Press [HDMI] to change the resolution of the video signal being output from the HDMI OUT. The video resolution
changes as follows every time [HDMI] is pressed. Or change the setting in the “Resolution” in the settings menu.
480p
480p 720p
480p 1080i
480p 1080p
e.g.) when 480p is selected as an default.
Copyright protection system
To play back the digital video images of DVD-video via an HDMI connection, it is necessary that both the
player and the display device (or an AV receiver / amplifier) support a copyright protection system called HDCP
(highbandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption
and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of your
display device (or AV receiver / amplifier) for more information.
Note:
• When using HDCP-incompatible display device, the picture will not be viewed properly.
• The audio signals from the HDMI jack (including the sampling frequency, the number of channels and bit length)
may be limited by the device that is connected.
• Among the display device(s) that support HDMI, some do not support audio output (for example, projectors). In
connections with device such as this unit, audio signals are not output from the HDMI output jack.
• When this unit’s HDMI jack is connected to a DVI-D compatible display device(s) (HDCP compatible) with an HDMIDVI
converter cable, the signals are output in digital RGB.
• Pressing [HDMI] does not work when HDMI cable is not connected, or when no video signal is being output from
the HDMI OUT jack.
• Pressing [HDMI] does not work when a DVI compatible display devices is connected. Change the video resolution in
the “Resolution” in the settings menu.
• When you make a selection, the TV monitor temporarily goes blank and then comes back again. If it does not, press
[HDMI] repeatedly to change the resolution or press and hold [ PLAY B] on the front panel for 5 seconds to
change the setting back to its default.
EN
–
–
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to an Audio System
Analog Audio Connection
Digital Audio Connection
stereo system
Audio
Dolby Digital decoder,
MD deck or DAT deck
COAXIAL
analog audio
input jacks
digital audio
input jack
L
R
digital audio
coaxial cable
RCA audio cable
DIGITAL
AUDIO OUT
This unit
Setup > Audio>
Digital Out
Setting
L
Connection
AUDIO OUT
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
Bitstream
LPCM
R
AUDIO
OUT
Connecting to the other device
(an MD deck or DAT deck etc.)
without Dolby Digital decoder.
* To complete these settings, refer to pages 15,17.
Note:
• The audio source on a disc in a Dolby Digital multi-channel
surround format cannot be recorded as digital sound by an
MD or DAT deck.
• By hooking this unit up to a Dolby Digital decoder, you can
enjoy high-quality Dolby Digital multi-channel surround
sound as heard in the movie theaters.
• Playing back a DVD using incorrect settings may generate
noise distortion and may also damage the speakers.
• “Digital Out” setting is not available while HDMI audio is
output.
Supplied cables used in this connection are as
follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at
your local store.
Rear Terminals
1
2
3
4
5
6
1
2
HDMI OUT jack
Use to connect a TV with an HDMI compatible port with an HDMI cable.
DIGITAL AUDIO OUT COAXIAL jack
Connect a digital audio coaxial cable here through the digital audio coaxial input jack of a decoder or audio receiver.
3
4
AUDIO OUT jacks
Connect an audio cable here through the audio input jacks of a television or other audio device.
COMPONENT VIDEO OUT jacks
Connect a component video cable here through the component video input jacks of a television.
5
6
S-VIDEO OUT jack
Connect an S-video cable here through the S-video input jack of a television.
VIDEO OUT jack
Connect a video cable here through the video input jack of a television.
EN
–
–
8
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Remote Control
Media
Remote Control
Button
(Alphabetical order)
• To enter values in the input field.
• To select track directly. (CD)
• To select folder/file directly.
(MP3/JPEG)
• To enter values in the input field.
• To select chapter or title directly.
• To move the cursor and determine
its position.
• To rotate the JPEG.
• To move the cursor and determine
its position.
• To repeat between your chosen
point of A and B.
• To repeat between your chosen
point of A and B. (CD/MP3)
• To select camera angles on a disc.
• To select audio language on a disc.
------
• To select “Stereo”, “L-ch” or “R-ch”.
(CD)
• To cancel the point for A-B repeat.
(CD/MP3)
• To remove status number in
program input.
• To clear the numbers entered
incorrectly.
• To cancel the point for A-B repeat.
• To clear the numbers entered
incorrectly.
• To display the current disc mode.
• To select items or settings.
• To display the current disc mode.
• To select items or settings.
• To set the HDMI output mode.
• To set the HDMI output mode.
• To search forward/backward through
a disc. (×2, ×4, ×8, ×16, ×32)
• To begin slow forward/backward
playback in the pause mode.
Installing the Batteries for the
Remote Control
• To search forward/backward through
a disc. (×2, ×4, ×8, ×16, ×32)
Install batteries (AA x2) matching
the polarity indicated inside battery
compartment of the remote control.
• To call up the menu on a disc.
------
------
• To arrange the playing order or play
randomly.
1
2
3
• To open or close the disc tray.
• To turn on the unit.
• To open or close the disc tray.
• To turn on the unit.
• To pause disc playback.
• To advance playback one frame at
a time.
• To pause disc playback.
• To start playback or resume
playback.
• To start playback or resume
playback.
• To play back a track or disc
repeatedly. (CD)
• To play back a file, folder or disc
repeatedly. (MP3/JPEG)
Keep in mind the following when using
the remote control:
• Make sure that there are no obstacles
between the remote control and the
remote sensor on the unit.
• To play back a chapter or title
repeatedly.
• The maximum operable ranges from the
unit are as follows.
- Line of sight:
approx. 23 feet (7m)
- Either side of the center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
• To return to the previously
displayed menu screen.
• When file list is shown, press to
switch folder list. (MP3/JPEG)
• To search tracks or files.
• To search time. (CD/MP3)
• To search folders. (MP3/JPEG)
• To return to the previously
displayed menu screen.
• To search chapter, title or time.
• To call up the setup menu.
• To call up the setup menu.
• To skip tracks or files.
• When file list / folder list is shown,
press to switch between pages.
(MP3/JPEG)
• To skip chapters or titles.
• To turn the unit on or to turn the
unit into the standby mode. (To
completely turn off the unit, you
must unplug the AC power cord.)
• To turn the unit on or to turn the
unit into the standby mode. (To
completely turn off the unit, you
must unplug the AC power cord.)
Note:
• Do not mix alkaline and manganese
batteries.
• To stop playback.
• To stop playback.
• Do not mix old and new batteries.
• Always remove batteries from remote
control if they are dead or if the
remote control is not to be used for
an extended period of time. This will
prevent battery acid from leaking into
the battery compartment.
• To select subtitle language on a disc.
• To call up the title menu on a disc.
------
------
• To magnify part of a picture.
(x2, x3, x4, x1/2, x1/3, x1/4)
• To magnify part of a picture. (JPEG)
(x2, x3, x4, x1/2, x1/3, x1/4)
EN
–
–
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD FUNCTIONS
Please note : most instructions in this manual refer to remote control use.
Playback
Lights up when power is off.
Before:
Turn on the TV, amplifier and any other
device which are connected to this unit.
Make sure the TV and audio receiver (not
supplied) are set to the correct channel.
2
2
4 3
1
Lights up when discs playback.
2
1
⇒
Note:
on page 11
(
)
• When you play back a DVD or CD-RW/-R with
MP3/JPEG files, details on page 11.
• A “ ” may appear at the top-right on the TV
screen when the operation is prohibited by the disc or this
unit.
1
2
Press [STANDBY-ON] to turn on this
unit.
Press [OPEN / CLOSE A] and insert a
disc with label facing up.
• Some DVD may start playback from title 2 or 3 due to specific
programs.
• During the playback of a 2-layered disc, pictures may stop for
a moment. This happens while the 1st layer is being switched
to the 2nd layer. This is not a malfunction.
3
4
Press [PLAY B] to start playback.
3
4
Press [STOP C] to stop playback.
• You can change the on-screen language in “Player Menu”
setting. (Refer to page 15.)
Disc Menu
Fast Forward / Reverse Search
Some discs contain menus which allow you to customize DVD
playback. Use [K / L / s / B] to select an item, then press
[ENTER] or [PLAY B].
Use [FWD g] or [REV h] repeatedly during
playback to select the required forward or
E
FR x 2
reverse speed.
To continue playback, press [PLAY B].
Calling Up a Menu Screen during Playback
Note:
• Fast forward or reverse search speed is different depending
on the disc. Approximate speed is x2, x4, x8,x16 and x32.
• Press [MENU] to call up the disc menu.
• Press [TOP MENU] to call up the title menu.
Slow Forward / Reverse Search
Note:
• Menu operations may vary depending on the disc. Refer to
the manual accompanying the disc for more details.
Press [FWD g] or [REV h] repeatedly
in the pause mode to select the required
D
SF x1/32
Resume Playback
forward/reverse speed.
To continue playback, press [PLAY B].
Press [STOP C] during playback. Resume icon
Note:
will appear at the top-left on the TV screen. Press
• Slow forward / reverse speed is different depending on the
disc. Approximate speed is x1/32, x1/16, x1/8, x1/4 and x1/2.
R.Stop
[PLAY B], playback will resume from the point at
which playback was stopped.
Note:
Zoom
• To cancel resume, press [STOP C] one more time in the stop
mode.
• The resume playback information stays on even when the
power is turned off, as long as the disc stays in the unit.
1) Press [ZOOM] repeatedly during playback
to select the required zoom factor: x2, x3,
x4, x1/2, x1/3, x1/4 or off.
Paused and Step-by-Step Playback
2) Use [K / L / s / B] to slide the zoomed
x2
picture across the TV screen.
3) To exit zoom function, press [ZOOM]
repeatedly to select off.
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
Pause
Note:
• Zooming function does not work while the disc menu is
displayed.
The disc goes forward by one frame each time [PAUSE F]
is pressed in the pause mode.
To continue playback, press [PLAY B].
• Some part of the picture may not be zoomed depending on
the disc or playback status.
EN
–
–
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 / JPEG Playback
MP3/JPEG is a method of compressing files. You can copy MP3/JPEG files on DVD or
CD-RW/-R from the computer and play back the files on this unit.
This unit recommends the files recorded under
the following circumstances:
Insert an MP3/JPEG format disc, then the file list will automatically appear on the TV
screen.For a disc with MP3 or JPEG files only, all repeat playback will start automatically.
Applicable MP3 file
Remarks
Sampling frequency:
44.1 kHz or 48 kHz
For MP3 file recorded
in VBR (variable bit
rate), the unit may
not display the actual
elapsed time.
1 Select the desired folder or file.
Note:
• Some selections may take a while to
be ecognized.
Constant bit rate:
32 kbps ~ 320 kbps
All 0001/0068
• Refer to “On-Screen Display” on
page 12 for more details.
Audio
Picture
_01.jpg
1. photo
ENTER
2. photo
3. photo
4. photo
5. photo
6. photo
_
_
_
_
_
02.jpg
03.Sjpg
04.jpg
05.jpg
06.jpg
• If you record data over 20 times, it
may not be played back correctly.
• For a disc with JPEG files only, the file
list will appear while in stop mode.
• A maximum of 498 folders or 4000
files may be recognized on one disc.
• Up to 8 hierarchies can be
Applicable JPEG file
Remarks
RERURN
MODE
Change
Folder
Program
A JPEG image
that extends
beyond the
screen is
e.g.) JPEG
Normal playback
Upper limit: 6,300 x 5,100
recognized in one folder. File in the
9th or deeper hierarches cannot be
played back.
Pixel lower limit: 32 x 32 pixel reduced so
2 Press [ENTER] or [PLAY B].
File size: Max. 7 MB
that it will be
displayed within
the screen.
Playback will start from the first file of
the folder or files.
• To rotate the picture, press cursors
during playback JPEG files.
Search Functions
Using Track / File / Folder Search
Using Title / Chapter Search
Using Time Search
Using [SEARCH MODE]
1
Using [SEARCH MODE]
1
1
02/10
001/033
- -:- -:- -
Off
--
/14
00:00:13
Off
--/10
001/033
00:05:30
Off
e.g.) DVD
e.g.) CD
or
ENTER
e.g.) DVD
Press cursor [B] to
highlight
CD / MP3: once
DVD: twice
2 Enter the desired track / file / folder
ENTER
.
number within 10 seconds.
02
/14
00:01:04
Off
Press [SEARCH MODE] once for the
title search.
For the chapter search, press
2 Enter the desired time within 10
cursor [B] to highlight
.
seconds.
3 Press [ENTER].
• To play back the tracks, files or folders
whose track / file / folder number is
double-digit or larger, press the number
directly.
2 Enter the desired title or chapter
02/10
001/033
00:05:51
Off
number within 10 seconds.
02/10
001/033
00:05:51
Off
e.g.)
-for file 14, press [1], [4] and [ENTER].
-for file 114, press [1], [1], [4] and [ENTER].
3 Press [ENTER].
-for file 1114, press [1], [1], [1] and [4]
.
3 Press [ENTER].
Using [SKIP H , G]
1
Note:
Using [SKIP H , G]
• To play time 00:15:00, press [1], [5], [0],
[0] of [the Number buttons].
• Press [CLEAR] to erase the incorrect
input at step 2.
1
Current Track / File / Folder
Current Chapter
TR 1 TR 2 TR 3 TR 4
• For audio CD and MP3, time search
is not available for programmed or
random playback.
SKIP
SKIP
CH 1 CH 2 CH 3 CH 4
SKIP SKIP
e.g.) Track
Note:
• For audio CDs, MP3 and JPEG files, track /
file / folder search are not available for
programmed or random playback.
Note:
• Depending on the disc being played
back, this function can also be performed
by directly entering the desired chapter
number with [the Number buttons].
Refer to the manual accompanying the disc.
Available Search Mode
Track Search
Displayed list
No list displayed
File list
File Search
Folder list
Folder Search
EN
–
–
11
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display
You can check the information about the current disc by pressing
You can check the information about the current disc by pressing
[DISPLAY].
[DISPLAY].
T(Title):
current title number / total
titles
T(Track):
current track number / total
track
current repeat mode
(Off / All / Track / A-B)
elapsed time of the current
time
02/14
00:00:13
Off
1
02/10
001/033
00:05:51
Off
1
2
current repeat mode
(Off/Title/Chapter/A-B)
current play mode
(Program/Random)
elapsed time of the current
time
current chapter number /
total chapters
current audio
elapsed time of current
track
Track time:
00:00:21
00:03:19
2
3
current subtitle
angle information
remaining time of current
track
1/3 Dolby D 3/2.1CH ENG
Off
1/3
elapsed time of Disc
Disc time:
00:00:25
00:40:15
elapsed time of current
chapter
remaining time of Disc
3
4
Chapter time:
00:01:03
00:01:18
remaining time of current
chapter
4
elapsed time of current title
Title time:
00:01:11
02:09:06
remaining time of current
title
• Only in stop mode for JPEG.
playback media tab
Audio (MP3) / Picture (JPEG)
current repeat mode
(All / Folder / File / Off /
A-B(MP3))
5
displaying folder list:
current folder number /
total folders
Note:
•
Some DVD will not allow you to set chapter playback correctly.
displaying file list:
current file number / total
files in the current folder
elapsed time of the
current file / total time of
current file (while MP3 file list
is displayed only)
0001/0008 00:00:12/00:03:23
All
Audio
Picture
1. folder1
2. folder2
3. folder3
4. folder4
5. folder5
6. folder6
thumbnail (while JPEG file
list is displayed only)
file list / folder list
operation guide
RERURN
MODE
Change
Folder
Program
EN
–
–
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat / Random / Programmed Playback
Repeat Playback
Programmed Playback
Repeat A-B Playback
Repeat function is available only during
You may determine the order in which
tracks or files will play back.
Repeat function is available only during
playback and set the repeat setting to
“Off”.
playback.
1
1 Press [MODE] repeatedly to select
“Program”.
1
Chapter
Program
A-
e.g.) DVD
e.g.) CD
e.g.) DVD
Each time you press [REPEAT], repeat
function changes as example below.
2 Select a track or a file.
at your desired starting point (A)
2
ENTER
A-B
(repeat off)
Off
(current title repeat)
(current chapter repeat)
Title
0005/0030
at your desired ending point (B)
• Point B should be in the same title,
track or file as point A.
1. 01_
2. 02_
3. 03_
4. 04_
5. 05_
6. 06_
7. 07_
**********.mp3
**********.mp3
**********.mp3
**********.mp3
**********.mp3
**********.mp3
**********.mp3
1. 01_
2. 02_
3. 03_
4. 04_
5. 05_
6. 06_
**********.mp3
**********.mp3
**********.mp3
**********.mp3
**********.mp3
**********.mp3
Chapter
CLEAR
ENTER
PLAY
Note:
Clear All
Clear
PLAY
• To exit the sequence, press [A-B] so
that “Off” appears.
e.g.) MP3
(repeat off)
Off
• To cancel point A, press [CLEAR] at
step 1.
• This function does not work in the
other repeat modes.
• Up to 20 files or tracks can be
ordered.
All
(entire disc repeat)
(current track repeat)
Track
When the highlight is in the
track / file list
Random Playback
[RETURN]: exit from the program menu.
[ENTER]: select a track / file.
[PLAY B]: start program playback.
(entire disc repeat)
(current folder repeat)
(current file repeat)
(repeat off)
All
This function shuffles the playing order
of files or tracks instead of playback in
the sequence.
When the highlight is in the
programmed list
Folder
File
1 Press [MODE] repeatedly to select
[CLEAR]: erase all the track / file in the
“Random”.
program.
Random
[ENTER]: erase the track / file you select.
[PLAY B]: start program playback.
Off
e.g.) CD
Random playback will start.
Note:
• Repeat setting (except “All”) will be
cleared when moving to another title,
chapter, track, file or folder (only for
DVD and CD).
Note:
•While a program is being played back,
Note:
[STOP C] works as follows;
• During random playback, you cannot
go back to the previous track or file,
using [SKIP G] allows you to search
tracks or files randomly.
-
Press [STOP C] and [PLAY B] next,
so that the programmed playback
restarts.
• To clear the repeat setting for MP3
and JPEG files, set the repeat setting to
“Off”.
• This function is not available with
some discs or during repeat A-B
playback.
-
Press [STOP C] twice and [PLAY B]
next, so that playback restarts from
the first track in the original order.
However, your programmed playback
can be restarted when you follow the
above steps. (Your programs are still
stored until either the disc is removed
or power is turned off.)
EN
–
–
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Settings
Camera Angles
Subtitle Language
Some DVD may contain
This unit allows you to select a subtitle
language (if available) during DVD
playback.
scenes which have been shot
simultaneously from various
angles. You can change the
1
camera angle if
appears on the TV
screen. If the “Angle Icon” setting is “Off”
Off
in “Display” menu,
(Refer to pages 15-16.)
will not appear.
1
Each time you press [SUBTITLE], subtitle
language changes as example below.
1/3
Off (no subtitles)
Each time you press [ANGLE], camera
ENG (English subtitles)
FRE (French subtitles)
angle changes.
Stereo Sound Mode
This unit allows you to select a sound
mode during CD playback.
Audio Language
1
This unit allows you to select an audio
language (if multiple languages are
available on disc) during DVD playback.
Stereo
1
Each time you press [AUDIO], sound
mode changes as example below.
1/4 Dolby
D
3/2. 1ch ENG
Stereo
(right and left channels
are active)
L-ch
(left channel is active)
Each time you press [AUDIO], audio
language changes as example below.
R-ch
(right channel is active)
ENG (English audio)
SPA (Spanish audio)
FRE (French audio)
Note:
• Some discs will only allow you to change
the audio setting from the disc menu. Refer
to the manual accompanying the discs for
details.
• If your language is not shown after pressing
[AUDIO] several times, the disc may not have
that language. However, some discs allow
audio language setting on the disc menu.
(Operation varies depending on the disc, so
refer to the manual along with the disc.)
EN
–
–
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setting
You can change the settings of the unit. You cannot change the setting during playback. Setting items are displayed in
gray when they are not available under the conditions at the time.
1 Press [SETUP].
2 Select the desired item.
ENTER
<SETUP MENU>
Player Menu
Subtitle
Language
Display
Video
Player Menu
Subtitle
Language
Display
Video
Audio
Audio
Disc Menu
Disc Menu
Audio
Audio
Others
Others
Language menu
Display menu
Video menu
Audio menu
Others menu
Player Menu
Subtitle
Angle Icon
TV Aspect
Dual mono
Down Sampling
DRC
Auto Power Off
HDMI
Language
Display
Video
Language
Display
Video
Language
Display
Video
Language
Display
Video
Language
Display
Video
Screen Saver
Progressive
Audio
Parental
Disc Menu
Reverberation
Sound Menu
Digital Out
Initialize
Audio
Audio
Audio
Audio
Audio
Others
Others
Others
Others
Others
A
B
C
D
E
page 15
page 16
page 16
page 17
page 18
Language Setting
A
Follow steps 1 to 2 above.
3 Select the desired item.
4 Select the desired language.
5 To exit the menu
ENTER
ENTER
Note:
Player Menu:
Language menu
∗1
Player Menu
Subtitle
(Default: English)
Sets the language
for the on-screen
display.
English
Français
Español
• Language options are not
available with some discs.
• If “Others” is selected in the
“Audio”, “Subtitle” or
“Disc Menu” screen, select the
desired language using
[K / L]. Press [ENTER].
• Only the languages supported by
the disc can be selected.
∗2
Audio
Player Menu
Subtitle
Language
Display
Video
Disc Menu
Audio
Disc Menu
Player Menu
Subtitle
Subtitle: ∗1 ∗2
(Default: Off)
Sets the subtitle
language.
Audio
Off
Audio
Others
English
Français
Español
Other
Disc Menu
• “Language” setting for “Audio”
and “Subtitle” are not available
with some discs. Then press
[AUDIO] and [SUBTITLE]. Details
are on page 14.
Subtitle
Audio
Audio: ∗1 ∗2
(Default: Original)
Sets the audio
language.
Original
English
Français
Español
Other
Disc Menu
Audio
Disc Menu: ∗1
Disc Menu
English
Français
Español
Other
(Default: English)
Sets the language
in DVD menu.
EN
–
–
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Setting
B
You can change the display functions. Follow steps 1 to 2 on page 15.
3 Select the desired item.
4
5 To exit the menu
Angle Icon: (Default: On)
See note on the right.
Select the
desired
Angle Icon
Angle Icon
ENTER
Language
Display
Video
On
Off
Screen Saver
Screen Saver
setting.
Display menu
Note:
Angle Icon
Language
Display
Video
Angle Icon:
Screen Saver
Screen Saver: (Default: On)
• Set to “On” to display
when multiple camera
angles are available
during DVD playback.
Screen Saver:
See note on the right.
Select the
desired
Audio
Angle Icon
Angle Icon
Language
Display
Video
Others
Screen Saver
Screen Saver
setting.
On
Off
• Sets whether to
activate the screen
saver after 5 minutes of
no action on the unit.
Video Setting
C
You can change the video functions. Follow steps 1 to 2 on page 15.
3 Select the desired item.
4
5 To exit
TV Aspect: (Default: 16:9 Wide)
Sets the aspect ratio of the playback
image to fit your TV.
“TV Aspect” menu
ENTER
Select the
desired
TV Aspect
TV Aspect
Language
Display
Video
16:9 Wide
Progressive
Progressive
4:3 Letter Box
4:3 Pan &Scan
setting.
Video menu
Audio
To complete
“Progressive”
setting
TV Aspect
Language
Display
Video
Progressive
Progressive: (Default: Off)
Audio
Changing ”Progressive” setting is not
Others
available while HDMI cable is connected.
Select
“On”.
TV Aspect
TV Aspect
Language
Display
Video
On
Off
Progressive
Progressive
Note:
TV Aspect:
• Select“16:9 Wide”
if a wide-screen TV is
connected to this unit.
• Select “4:3 Letter Box”,
so that black bars may
appear on the top
and bottom of the TV
screen.
Audio
Select “Yes”.
Before proceeding…
Make sure your TV supports the selected item.
Connect with component video cable.
If there is no picture
or you do not press
any buttons for 15
seconds, “Progressive”
will switch to “Off”
and it will exit the
setup menu.
NOTE: If blank screen appears, wait for 15 seconds
a
for auto-recovery.
Activate?
Progressive
Yes
No
On
• Select “4:3 Pan & Scan”
for a full height picture
with both sides adjusted.
Progressive:
Select:
K
/
L
Set:ENTER
• You can set
“Progressive” to “Off”
in “Video” menu or
press and hold
[
] on the
B
PLAY
front of the unit for
more than 5 seconds
during playback.
• When “Progressive”
is “On”, video signals
from the unit’s VIDEO
OUT and S-VIDEO OUT
jacks will be distorted
or not be output at all.
EN
–
–
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Setting
D
Choose the appropriate audio settings for your device. It only affects during the playback of DVD. Follow steps 1 to 2 on page 15.
3 Select the desired item.
4
5 To exit the menu
Dual mono: (Default: Stereo)
This unit allows you to select a sound mode during CD playback.
ENTER
Dual mono
Down Sampling
DRC
Language
Display
Video
Select the
desired
Dual mono
Down Sampling
DRC
Stereo
L-ch
setting.
Reverberation
Sound Menu
Digital Out
R-ch
Audio
Note:
Reverberation
Audio menu
General
Reverberation:
Normal:
Dual mono
Down Sampling
DRC
Language
Display
Video
no effects
(original sound)
Reverberation
Sound Menu
Digital Out
Down Sampling: (Default: On)
Living Room:
sounds as if you
are in a living
room
Audio
Set to “On” when outputting in 48kHz.
Set to “Off” when outputting the original sound.
Others
Dual mono
Down Sampling
DRC
Language
Display
Video
Select the
desired
Dual mono
Down Sampling
DRC
Hall: sounds as if you
setting.
Reverberation
Sound Menu
Digital Out
On
Off
are in a hall
Audio
Reverberation
Arena: sounds as if you
are in an arena
General
Cave: sounds as if you
are in a cave
Concert Hall:
sounds as if you
are in a concert
hall
DRC (Dynamic Range Control): (Default: On)
Note:
Set to “On” to compress the range between soft and loud sounds.
Down Sampling:
Down Sampling
Display
Select the
• When playing back disc
with copyright protection,
the sound will be down
sampled at 48kHz, even if
you set to “Off”.
DRC
desired
Video
Reverberation
Sound Menu
Digital Out
Bath Room:
setting.
Audio
sounds as if you
are in a bath room
on
General
Cathedral:
DRC:
sounds as if you
are in a cathedral
• This function is available
only on the discs which
are recorded in the Dolby
Digital format.
Reverberation: (Default: Normal)
Sound Menu:
Off: no effects (original
sound)
3D: sound mode
suitable for setting
stereophonic
audio
Jazz: sound mode
suitable for jazz
music
Rock: sound mode
suitable for rock
music
You can set the reverberation effect.
Dual mono
Normal
• “On” “7/8-1/8” “Off”:
Compress the range
between soft and loud
sounds.
Down Sampling
Select the
desired
Living Room
DRC
DRC
Hall
Video
Reverberation
Sound Menu
Digital Out
Reverberation
Sound Menu
Digital Out
Arena
setting.
Audio
Cave
Concert Hall
Bath Room
Cathedral
General
Digital Out:
• When HDMI cable is
connected, make sure
“HDMI Audio” setting is
set to “Off” to change the
“Digital Out” setting.
Sound Menu: (Default: Off)
You can enjoy stereophonic virtual world
your existing 2 channel stereo system.
Pop: sound mode
suitable for pop
music
Dual mono
Select the
desired
Off
Down Sampling
Video
Audio
Others
3D
Reverberation
Sound Menu
Digital Out
DRC
Jazz
Rock
Pop
setting.
Classic:
Reverberation
Sound Menu
Digital Out
sound mode suitable
for classic music
Classic
• Sound Menu is
available under the
following condition:
- When the unit is
connected to a TV
using AUDIO OUT
jacks.
- When “HDMI Audio”
is set to “LPCM”.
- When “Digital Out” is
set to “LPCM”.
Digital Out: (Default: Bitstream)
Set to “Bitstream” when the unit is connected to a Dolby Digital
decoder.
• Bitstream: outputs a Dolby Digital signals.
• LPCM: convert the Dolby Digital into LPCM (2 channel).
Select the
Video
Audio
Others
Sound Menu
Digital Out
desired
setting.
Reverberation
Sound Menu
Digital Out
Bitstream
LPCM
EN
–
–
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Others Setting
E
Follow steps 1 to 2 on page 15.
3 Select the desired item.
5 To exit “Auto Power
Off”, “HDMI” or
4
Auto Power Off: (Default: On)
Set to “On” to turn this unit off automatically after 30 minutes of
no use.
“Parental” menu
ENTER
Auto Power Off
Language
Display
Video
Select the
desired
HDMI
Auto Power Off
HDMI
On
Off
Parental
Initialize
setting.
Parental
Initialize
Others menu
Audio
Auto Power Off
Language
Display
Video
Note:
Others
HDMI
Parental
Parental:
Initialize
• If you forgert the
password, press [4],
[7], [3], [7] at step
3 above, then enter
your new password.
Initialize:
• When you do not
wish to initialize, press
[SETUP] to exit the
menu at step 4.
Audio
Others
HDMI:
Resolution: (Default: Auto)
You can select the desired “Resolution” among the settings.
Auto Power Off
Select the
Auto
HDMI
Resolution
desired
setting.
Note:
480p
720p
Parental
Initialize
HDMI Audio
HDMI:
• You cannot select the
video resolutions which
are not supported by the
connected TV, except
when this unit’s HDMI
OUT jack is connected to
a DVI compatible display
devices with an HDMI-DVI
cable (default is 480p in
such case).
• The setting for “Paren-
tal” will not be reset.
HDMI Audio: (Default: Bitstream)
Sets the audio format for the sound output from the HDMI OUT.
Select the
Auto Power Off
desired
Bitstream
LPCM
Off
HDMI
Resolution
setting.
Parental
HDMI Audio
Initialize
• Video and audio signals
may be distorted
temporarily when
Parental:
switching to/ from the
HDMI output mode.
Resolution:
Parental level allows you to set the rating levels of your DVD.
Playback will stop if the ratings exceed the levels you set.
*1 If you have set a password already, “Enter your PIN” will be
displayed and enter the current 4-digit password.
*2 If you have set a password already, enter your new PIN after
entering the current password.
• Auto:
HDMI video resolution will
be selected automatically
depending on the
connected HDMI device.
If you want to change the
resolution manually, press
[HDMI] repeatedly.
Rating Level: (Default: 8[Adult])
Sets the rating level for the disc playback.
Select the
desired
Auto Power Off
setting.
HDMI
• When you make a
Rating Level
Parental
[
]
New PIN
8 Adult
selection, the TV monitor
temporarily goes blank
and then comes back
again. If it does not, press
[HDMI] to change the
resolution or press and
hold [PLAY B] on the
front panel for 5 seconds
to change the setting back
to its default.
Itinialize
Enter your new
4-digit password
Enter your new 4-digit
password again.
(except for 4373).
1
*
Enter New PIN
Confirm PIN
HDMI Audio:
----
----
• This feature is available
only when the display
device is connected by an
HDMI cable.
New PIN:
You can change your password for parental controls.
Enter your new
Enter your new 4-digit
password again.
4-digit password.
1,2
*
Enter New PIN
Confirm PIN
----
----
Initialize:
Reset to default setting.
Parental
HDMI
Select “Yes”
Video
Audio
Others
Initialize
Parental
Initialize
Yes
No
EN
–
–
18
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION
Troubleshooting Guide
If the unit does not perform properly when operated as instructed in this owner’s manual, refer to the following.
Problem
No power
Corrective action
–Check if the AC power cord is properly connected.
–Unplug the outlet once, and wait for 5-10 seconds and then plug it in again.
–Check if the TV is switched on.
–Check the video connection.
–Check the audio/video cable connections to the TV.
(Refer to page 6.)
No sound or picture
Distorted picture
–When“Progressive” is “On”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be
distorted or not be output at all.
–Check whether the connected TV or other device supports HDCP.
(This unit will not output a video signal unless the other device supports HDCP.)
–Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
–Connect the unit directly to the TV.
–Set “Progressive” correctly in “Video” menu. Turn it on only if your TV has progressive scan and you are
using the component video connections between the unit and the TV. Disable progressive scan for all
other connections. (Refer to page 6.)
Completely distorted picture or
black / white picture with DVD
–Connect this unit directly to the TV.
–Make sure the disc is compatible with the unit.
–Adjust the volume.
No sound or distorted sound
No audio at digital output
No DTS audio is output.
–Check that the speakers are connected correctly.
–Check the digital connections.
–Check if the audio format of the selected audio language matches your receiver capabilities.
–This unit does not support DTS audio.
This is not a malfunction.
Picture freezes momentarily during
playback.
–Check the disc for fingerprints/dirty and clean with a soft cloth wiping from center to edge.
–Clean the disc.
–Ensure the disc is inserted in correct direction.
–Check if the disc is defective by trying another disc.
–Cancel the parental lock or change the control level.
–Insert a correct disc that plays back on this unit.
–Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
Disc cannot be played back.
No return to start-up screen when
disc is removed.
–Reset the unit by switching off the unit, then on again.
–Aim the remote control directly at the sensor on the front panel.
–Reduce the distance to the unit.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
–Tune your radio to an empty AM station so that you hear a lot of noises. Then, turn up the volume. If
you hear some signal sound from the radio by pressing buttons on the remote control, the remote
control is working.
–Press and hold any button on remote control toward a digital camera. The remote control is working if
you confirm infrared light through the digital camera.
The unit does not respond to
the remote control.
Buttons do not work or the unit stops
responding.
–To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds.
The unit does not respond to some
operating commands during playback.
–Operations may not be permitted by the disc. Refer to the instructions of the disc.
The unit cannot read CD / DVD.
–Use a commonly available cleaning CD / DVD to clean the lens before sending the unit for repair.
–The angle cannot be switched for DVD which do not contain multiple angles. In some cases multiple
angles are only recorded for specific scenes.
Angle does not switch.
Playback does not start
when the title is selected.
–Check the “Parental” setting.
The password for rating level
has been forgotten.
–Enter the default password “4737”, then your forgotten password will be cleared.
Specifications
• Designs and specifications are subject to
change without notice.
Output signal format:
NTSC color
Operating temperature:
41°F (5°C) to 104°F (40°C)
• If there is a discrepancy between
languages, the default language will be
English.
Power source:
Dimensions:
1
120V AC +/- 10%, 60Hz +/- 0.5%
Power consumption:
8W (standby : 0.8W)
W : 11 /16”
1
(280mm)
(51mm)
(210mm)
H
D
: 2 /16”
: 8 /16”
5
Weight:
Approx 2.76lbs.(1.25kg)
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s manual for
more details on correct operations.
• Playback from a desired track and random playback are not available during programmed playback.
• Some functions are prohibited on some discs.
EN
–
–
19
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the
USA in the event of defect in materials or workmanship as
follows:
OF OR OCCASIONED BY THE USE OF OR THE INABILITY
TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI,
ALL OTHER WARRANTIES INCLUDING THE WARRANTY
OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY
INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN
AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID
WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE
CENTER.
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective
parts without charge for one (1) year from the date
of original retail purchase. Certain parts are excluded
from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge
for a period of ninety (90) days from the date of
original retail purchase.
IMPORTANT:
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser.
A purchase receipt or other proof of original retail purchase
will be required together with the product to obtain service
under this warranty.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.
YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO
STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD,
YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE
REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
This warranty shall not be extended to any other person or
transferee.
This warranty is void and of no effect if any serial numbers
on the product are altered, replaced, defaced, missing or if
service was attempted by an unauthorized service center.
This limited warranty does not apply to any product not
purchased and used in the United States.
This product is produced for home use and this warranty only
covers failures due to defects in material or workmanship
which occurs during normal use. It does not cover damage
which occurs in shipment, or failures which are caused by
repairs, alterations or product not supplied by FUNAI CORP.,
or damage which results from accident, misuse, abuse,
mishandling, misapplication, alteration, faulty installation,
improper maintenance, commercial use such as hotel, rental
or office use of this product or damage which results from
fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS,
ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR
FLOOR MODELS.FUNAI CORP. AND ITS REPRESENTATIVES OR
AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL,
INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN
OF THIS PRODUCT WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED
REPAIRS:
To obtain warranty service, you must take the product, or
deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of
protection, to any AUTHORIZED SERVICE CENTER. FUNAI
CORP. will not reimburse you for any service done by
unauthorized service providers without prior written
approval.
To locate your nearest AUTHORIZED SERVICE CENTER or
for general service inquiries, please contact us at:
FUNAI SERVICE CORPORATION
Customer Service
Tel :1-800-605-8610
2200 Spiegel Drive, Groveport, OH 43125
EN
–
–
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
EN
–
–
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
EN
–
–
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Español
Conexiones
Reproducción
1
4
Antes.
Si su televisor tiene entradas de
AUDIO/VIDEO vea la sección
“Connection to a TV” en la página 6 en el
manual de manejo. En caso contrario, vea
la sección “Connecting to RF Modulator
(Not Supplied)” en la página del frente en
el manual de manejo.
Encienda el televisor, amplifica-
dor y otros equipos conectados
a esta unidad. Asegúrese que el
televisor y el
1 Para abrir o cerrar 2 Ponga un disco
la bandeja del
disco
con la etiqueta
hacia arriba.
sintonizador
OPEN/CLOSE
STANDBY-ON
1
1
4
de audio (no
provisto) están
en el canal cor-
recto.
3 Para empezar la 4 Para parar la
Instalación de las pilas en el
control remoto
reproducción
reproducción
2
STOP
3
PLAY
1
2
3
Control remoto
5
Disco
(Orden alfabético)
Botón
• Para especificar valores en el campo de entrada.
• Para seleccionar directamente la canción. (CD)
• Para seleccionar la carpeta/archivo
directamente. (MP3/JPEG)
• Para especificar valores en el campo de entrada.
• Para seleccionar directamente el capítulo o
título.
• Para mover el cursor y determinar la posición.
• Para girar la imagen JPEG.
Para cambiar el idioma en la
pantalla
3
• Para mover el cursor y determinar la posición.
• Para repetir entre su punto A y B seleccionado.
• Para repetir entre su punto A y B seleccionado.
(CD/MP3)
1 Confirme que ha seleccionado
• Para seleccionar los ángulos de la cámara en
un disco.
“Language”.
STANDBY-ON
------
SETUP
• Para seleccionar idiomas de audio en un disco.
• Para seleccionar “Estéreo”, “L-ch” o “R-ch”. (CD)
STOP
• Para borrar el punto para la repetición A-B.
(CD/MP3)
• Para eliminar el Nº de estado en la entrada de
programa.
• Para borrar los números mal entrados.
• Para mostrar el modo de disco actual.
Player Menu
Subtitle
Language
Display
Video
• Para borrar el punto para la repetición A-B.
• Para borrar los números mal entrados.
Audio
Disc Menu
Audio
• Para mostrar el modo de disco actual.
Others
• Para seleccionar opciones o valores de
configuración.
• Para seleccionar opciones o valores de
configuración.
• Para establecer el modo de salida HDMI.
• Para establecer el modo de salida HDMI.
ENTER
• Para buscar en avance/retroceso por un disco.
(×2, ×4, ×8, ×16, ×32)
• Para empezar la reproducción en avance lento
durante el modo de pausa.
• Para buscar en avance/retroceso por un disco.
(×2, ×4, ×8, ×16, ×32)
2 Seleccione “Player Menu”.
• Para llamar el menú en un disco.
------
------
Player Menu
Subtitle
Language
Display
Video
• Para disponer el orden de reproducción o la
reproducción aleatoria.
Audio
• Para abrir o cerrar la bandeja del disco.
• Para encender la unidad.
• Para abrir o cerrar la bandeja del disco.
• Para encender la unidad.
Disc Menu
Audio
• Para hacer una pausa en la reproducción.
• Para hacer una pausa en la reproducción del
disco.
Others
•
Para avanzar la reproducción un cuadro cada vez.
• Para iniciar o reanudar la reproducción.
• Para iniciar o reanudar la reproducción.
• Para reproducir repetidamente una canción o
disco. (CD)
• Para reproducir un archivo, carpeta o disco
reiteradamente. (MP3/JPEG)
ENTER
• Para reproducir repetidamente un capítulo o
título.
• Para volver al menú o pantalla anteriormente
visualizado.
• Cuando aparezca la lista de archivos, presiónelo
para cambiar a la lista de carpetas. (MP3/JPEG)
3 Seleccione el idioma deseado para las
• Para volver al menú o pantalla anteriormente
visualizado.
indicaciones en la pantalla.
• Para buscar pistas o archivos.
• Para buscar el tiempo. (CD/MP3)
• Para buscar los grupos. (MP3/JPEG)
Player Menu
English
• Para buscar un capítulo, título o tiempo.
Subtitle
Français
Audio
Español
•
Para llamar el menú de ajustes de DVD.
•
Para llamar el menú de ajustes de DVD.
Disc Menu
• Para saltar pistas o archivos.
• Cuando aparezca la lista de archivos/
carpetas, presiónelo para cambiar de una
página a otra. (MP3/JPEG)
• Para saltar capítulos o titulo.
ENTER
• Para encender o para pasar la unidad al modo de • Para encender o para pasar la unidad al modo de
espera. (Para apagar completamente la unidad, espera. (Para apagar completamente la unidad,
debe desconectar el cable de alimentacion de CA.) debe desconectar el cable de alimentacion de CA.)
4 Para salir del menú
• Para parar la reproducción.
Para seleccionar el idioma de subtítulos de un disco.
• Para parar la reproducción.
SETUP
•
------
------
• Para visualizar el menú de títulos de un disco.
• Para ampliar la imagen de vídeo en DVD.
(x2, x3, x4, x1/2, x1/3, x1/4)
•
Para ampliar la imagen de vídeo en DVD. (JPEG)
(x2, x3, x4, x1/2, x1/3, x1/4)
ES
–
–
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Use Guide
Connections
Playback
1
4
Before:
If your TV has AUDIO/VIDEO input jacks,
see the section “Connection to a TV” on
page 6 of the owner’s manual. If not, see
the section “Connecting to RF Modulator
(Not Supplied)” on the front page of the
owner’s manual.
Turn on the TV, amplifier and
any other device which are
connected to this unit. Make
sure the TV and
1 To open the disc 2 Insert a disc with
tray
label facing up.
OPEN/CLOSE
audio receiver
STANDBY-ON
(not supplied)
are set to the
correct channel.
1
1
4
Installing the Batteries for
the Remote Control
2
3 To start playback 4 To stop playback
STOP
3
PLAY
1
2
3
Remote Control
5
Button
Media
(Alphabetical order)
• To enter values in the input field.
• To select track directly. (CD)
• To select folder/file directly. (MP3/JPEG)
• To enter values in the input field.
• To select chapter or title directly.
To Change the
On-Screen Language
3
• To move the cursor and determine its position.
• To rotate the JPEG.
• To move the cursor and determine its
position.
1 Confirm that “Language” is selected.
• To repeat between your chosen point of A
and B.
• To repeat between your chosen point of A
and B. (CD/MP3)
SETUP
STANDBY-ON
STOP
• To select camera angles on a disc.
• To select audio language on a disc.
------
• To select “Stereo”, “L-ch” or “R-ch”. (CD)
Player Menu
Subtitle
Language
Display
Video
• To cancel the point for A-B repeat.(CD/MP3)
• To remove status number in program input.
• To clear the numbers entered incorrectly.
• To cancel the point for A-B repeat.
• To clear the numbers entered incorrectly.
Audio
Disc Menu
Audio
• To display the current disc mode.
• To select items or settings.
• To display the current disc mode.
• To select items or settings.
Others
• To set the HDMI output mode.
• To set the HDMI output mode.
• To search forward/backward through a disc.
(×2, ×4, ×8, ×16, ×32)
• To begin slow forward/backward playback in
the pause mode.
ENTER
• To search forward/backward through a disc.
(×2, ×4, ×8, ×16, ×32)
2 Select “Player Menu”.
• To call up the menu on a disc.
------
------
• To arrange the playing order or play
randomly.
Player Menu
Language
Display
Video
Subtitle
Audio
• To open or close the disc tray.
• To turn on the unit.
• To open or close the disc tray.
• To turn on the unit.
Disc Menu
Audio
• To pause disc playback.
• To advance playback one frame at a time.
•
To pause disc playback.
Others
• To start playback or resume playback.
• To start playback or resume playback.
• To play back a track or disc repeatedly. (CD)
• To play back a file, folder or disc repeatedly.
(MP3/JPEG)
• To play back a chapter or title repeatedly.
ENTER
• To return to the previously displayed menu
screen.
• When file list is shown, press to switch folder
list. (MP3/JPEG)
• To return to the previously displayed menu
screen.
3 Select the desired language for the
on-screen language.
• To search tracks or files.
• To search chapter, title or time.
• To call up the setup menu.
• To search time. (CD/MP3)
• To search folders. (MP3/JPEG)
Player Menu
English
Subtitle
Français
Audio
• To call up the setup menu.
• To skip tracks or files.
• When file list / folder list is shown, press to
switch between pages. (MP3/JPEG)
Español
Disc Menu
• To skip chapters or titles.
ENTER
• To turn the unit on or to turn the unit into the
• To turn the unit on or to turn the unit into the
standby mode. (To completely turn off the unit, standby mode. (To completely turn off the unit,
you must unplug the AC power cord.)
you must unplug the AC power cord.)
• To stop playback.
• To stop playback.
4 To exit the menu
SETUP
• To select subtitle language on a disc.
• To call up the title menu on a disc.
------
------
• To magnify part of a picture.
(x2, x3, x4, x1/2, x1/3, x1/4)
• To magnify part of a picture. (JPEG)
(x2, x3, x4, x1/2, x1/3, x1/4)
E6MY0UD
1VMN27833 ★★★
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|