Owner’s Manual
Please read before using this unit.
DDVPD/1CD0P0layMer W8B B
INSTRUCCIONES EN
ESPAÑOL INCLUIDAS.
Supplied Accessories
Contents
PRECAUTIONS
remote control (NB093UD)
RCA audio/video cables
(WPZ0102TM018 /
WPZ0102LTE01)
• AA(1.5V DC)
Safety Instructions.....................................................................2
About the Discs..........................................................................5
Playable Discs.......................................................................................... .5
Unplayable Discs.................................................................................... .5
STANDBY-ON
OPEN/CLOSE
SEARCH
MODE
DISPLAY
battery x2
not supplied.
AUDIO
SUBTITLE
ANGLE
1
4
2
5
8
0
3
6
7
9
REPEAT
CLEAR
+10
A-B
PAUSE
SKIP
SLOW
PLAY
REV
FWD
STOP
TOP MENU
Owner’s Manual
SETUP
SETUP
MODE
ZOOM
MENU
owner’s manual
(1VMN27853)
ENTER
RETURN
Connections...............................................................................6
Connection to a TV................................................................................ .6
Connection to an Audio System ...................................................... .7
Rear Terminals......................................................................................... .7
About the Remote Control ........................................................8
Remote Control ...................................................................................... .8
Installing the Batteries for the Remote Control.......................... .8
Connecting to RF Modulator (Not Supplied)
If your TV has antenna in jack only, it is still possible to
connect this unit to your TV by using an RF modulator. In
this case, follow the instructions below.
DVD FUNCTIONS
Playback ....................................................................................9
MP3 Playback ...........................................................................10
Search Functions ......................................................................10
Using Track Search ............................................................................... .10
Using Title / Chapter Search ............................................................. .10
Using Time Search................................................................................ .10
On-Screen Display ....................................................................11
Repeat / Random / Programmed Playback .............................12
Repeat Playback .................................................................................... .12
Repeat A-B Playback............................................................................ .12
Random Playback ................................................................................. .12
Programmed Playback........................................................................ .12
Special Settings ........................................................................13
Subtitle Language................................................................................. .13
Audio Language.................................................................................... .13
Camera Angles....................................................................................... .13
Black Level Setting................................................................................ .13
Stereo Sound Mode ............................................................................. .13
Virtual Surround .................................................................................... .13
DVD Setting ..............................................................................14
LANGUAGE Setting............................................................................... .14
DISPLAY Setting..................................................................................... .15
AUDIO Setting........................................................................................ .15
PARENTAL Setting ................................................................................ .16
OTHERS Setting...................................................................................... .16
Reset to the Default Setting
1) Disconnect the power cords of the devices from the
AC outlet.
2) Make the connection as illustrated below.
3) Set your RF modulator’s channel 3/4 switch to
either 3 or 4, whichever the TV channel is least used in
your area. If your RF modulator has a modulator/
antenna switch, set it according to the manual
supplied with the RF modulator.
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel as
you set the RF modulator’s channel 3/4 switch to.
For more details, follow the manual supplied with the
RF modulator.
rear of this unit
CB/PB
Y
L
DIGITAL
AUDIO OUT
R
RCA video cable
CR/PR
VIDEO
OUT
AUDIO COAXIAL
OUT
S-VIDEO COMPONENT
L
OUT
VIDEO OUT
R
rear of TV
VIDEO
OUT
AUDIO
OUT
RCA audio cable
ANT. IN
rear of your RF
modulator
VHF / UHF
antenna
RF coaxial cable
or
3
4
R
L
ANT. IN CHANNEL
AUDIO IN VIDEO IN TO TV
RF coaxial
cable
cable TV
company
Set channel 3 or 4
(Except for PARENTAL Setting) ........................................................ .17
Note:
INFORMATION
• RF modulator is not supplied with this unit. You need to
purchase it at your local store.
Troubleshooting Guide ............................................................17
Specifications ...........................................................................18
LIMITED WARRANTY.................................................................18
Español .....................................................................................19
Quick Use Guide.......................................................... Back Cover
• The quality of picture may become poor if this unit is
connected to an RF modulator.
If you need additional operating assistance after
reading this owner’s manual, please call
TOLL FREE : 1-800-605-8610
or visit our web site at
© 2009 Funai Electric Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.
LASER SAFETY
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION: Visible and invisible laser radiation when open and inter lock defeated. Do not stare into beam.
LOCATION: Inside, near the deck mechanism.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product
incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is
prohibited.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.
To Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
Location and Handling
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Dew Condensation Warning
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Note about Recycling
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
Notice for Progressive Scan Output
• Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 525p(480p) DVD player, please contact our customer service center.
EN
–
–
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TRADEMARK INFORMATION
MAINTENANCE
Servicing
Manufactured under license from
• Please refer to relevant topics on the “Troubleshooting Guide”
on page 17 before returning the unit.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts inside.
Turn off, unplug the power plug, and please call our help line
mentioned on the front page to locate an authorized service
center.
Dolby Laboratories. Dolby and the
double-D symbol are trademarks
of Dolby Laboratories.
Products that have earned ENERGY STAR® are
designed to protect the environment through
superior energy efficiency.
Cleaning the Cabinet
• Wipe the front panel and other exterior surfaces of the unit
with a soft cloth.
• Never use a solvent, thinner, benzene or alcohol to clean the
unit. Do not spray insecticide liquid near the unit.
Such chemicals may discolor the surface or damage the unit.
SYMBOLS USED IN THIS MANUAL
The following symbols appear in some headings in this manual.
Cleaning Discs
:
:
:
Description refers to DVD-video.
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe
the disc from the center to out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or antistatic
spray intended for analog records.
Description refers to audio CD.
Description refers to CD-RW/-R with MP3 files.
Cleaning the Disc Lens
• If this unit still does not perform properly although you refer
to the relevant sections and to “Troubleshooting Guide” in
this owner’s manual, the laser optical pickup unit may be
dirty. Consult your dealer or an authorized service center for
inspection and cleaning of the laser optical pickup unit.
Disc Handling
• When you handle a disc, hold it by its edge and try not to
touch the surface of the disc.
• Always store the disc in its protective case when not in use.
© 2009 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or
stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any
unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the
obligation to notify any person or organization of such changes.
with the
design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the
express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners.
Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of
the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall
aggressively enforce its intellectual property rights to the fullest extent of the law.
EN
–
–
4
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Discs
Playable Discs
Type of
Recorded
signals
Mark (logo)
Region code
Disc size
Disc types
media
DVD-video
*1, 2, 4, 6, 9
or
5 inches
(12 cm)
or
3 inches
(8 cm)
DVD-RW
DVD-R
*1, 3, 4, 5, 6,
7, 8, 9
e.g.)
title 1
title 2
digital video
(MPEG2)
chapter 2
chapter 1 chapter 2 chapter 3 chapter 4 chapter 1
DVD+RW
DVD+R
*1, 4, 5, 6, 8, 9
audio CD
MP3
audio CD
*4, 6, 9
e.g.)
digital audio
track 1
track 2
track 3
track 4
track 5
track 6
5 inches
(12 cm)
or
3 inches
(8 cm)
CD-RW
CD-R
*4, 5, 6, 8, 9,
digital audio
e.g.)
folder 1
folder 2
or
MP3
file 1
file 3
file 2
file 4
file 1
file 2
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-video do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special
properties of discs.
*6: You can play back discs which bear the marks above. If you use non-standardized discs, this unit may not play them back. Even
if they are played back, the sound or video quality will be compromised.
*7: Only the discs recorded in the video format and finalized can be played back. Unfinalized discs cannot be played back.
Depending on the recording status of a disc, the disc may not be played back at all. The picture or sound may not be smooth,
etc.
3
16
*8: If the recorded portion of the disc is too small (smaller than 2- / inches (55mm) across), it may not be played back.
*9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
Unplayable Discs
NEVER play back the following discs as malfunction may result!
DVD-RAM / DVD-audio / CD-i / photo CD / video CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-ROM for personal
computers / CD-ROM for personal computers / HD DVD / Blu-ray Disc
On the following disc, the sound MAY NOT be heard.
super audio CD
Any other discs without compatibility indications
Note:
• Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio CD layer
cannot be delivered.
EN
–
–
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
Connections
Connection to a TV
Method 1
Method 2
Method 3
TV
analog audio
standard picture
good picture
better picture
AUDIO IN
COMPONENT
VIDEO IN
COMPONENT
VIDEO IN
L
Y
Y
VIDEO IN
S-VIDEO IN
R
C
B
R
P
B
or
A
U
D
I
O
I
N
L
or
or
R
and
V
I
D
E
O
I
N
C
P
R
RCA audio cable
RCA video cable
S-video cable
component video cable
This unit
CB/PB
Y
Y
CB/PB
L
L
DIGITAL
AUDIO OUT
IGITAL
ADIO OUT
R
VIDEO
OUT
C
R/PR
AUDIO COAXIAL
OUT
R
COMPONENT
VIDEO OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO COAXIAL
OUT
CR/PR
VIDEO
OUT
S-VIDEO COMPONENT
OUT
VIDEO OUT
COMPONENT
VIDEO OUT
AUDIO OUT
VIDEO OUT
S-VIDEO OUT
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note:
• Connect this unit directly to your TV. If RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy
protection system.
If your TV is compatible with 525 (480) progressive scanning and you want to enjoy that high quality picture;
You must select the connection COMPONENT VIDEO OUT above and progressive scanning mode. To set the mode, set “PROGRESSIVE”
to “ON” in “DISPLAY” menu. Refer to pages 14-15 for more details.
• When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output
at all.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in “DISPLAY” menu or by pressing and holding [PLAY B] on
the front of the unit for more than 5 seconds.
After connecting to your TV:
You will need to switch to video input on your TV. This is usually marked TV/VIDEO, INPUT or AUX.
Please refer to your TV’s owner’s manual for details.
Input modes for common TV brands:
Listed below are inputs for common brand name TV’s.
Admiral:
Curtis Mathis:
GE:
AUX
Panasonic:
RCA:
TV/VIDEO
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
Samsung:
Sanyo:
TV/VIDEO
Hitachi:
INPUT, AUX
VIDEO
JVC:
VIDEO, VIDEO1, VIDEO2, VIDEO3
Sharp:
Sony:
Toshiba:
Zenith:
00
Kenwood:
LXI-Series:
Magnavox:
AUX
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00
AUX CHANNEL
EN
–
–
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to an Audio System
Analog Audio Connection
Digital Audio Connection
stereo system
Audio
Dolby Digital decoder,
MD deck or DAT deck
COAXIAL
analog audio
input jacks
Digital audio
input jack
L
R
digital audio
coaxial cable
DIGITAL
AUDIO OUT
RCA audio cable
DIGITAL
AUDIO OUT
COAXIAL
This unit
SETUP > AUDIO>
DOLBY DIGITAL
Setting
Connection
L
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
AUDIO OUT
BITSTREAM
PCM
R
AUDIO
OUT
Connecting to the other device
(an MD deck or DAT deck etc.)
without Dolby Digital decoder.
* To complete these settings, refer to pages 14-15.
Note:
• The audio source on a disc in a Dolby Digital multi-channel
surround format cannot be recorded as digital sound by an
MD or DAT deck.
• By hooking this unit up to a Dolby Digital decoder, you can
enjoy high-quality Dolby Digital multi-channel surround
sound as heard in the movie theaters.
Supplied cables used in this connection are as
follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at
your local store.
• Playing back a DVD using incorrect settings may generate
noise distortion and may also damage the speakers.
Rear Terminals
1
2
4
5
CB/PB
Y
L
DIGITAL
AUDIO OUT
R
VIDEO
OUT
AUDIO COAXIAL
OUT
CR/PR
S-VIDEO COMPONENT
OUT
VIDEO OUT
3
1
S-VIDEO OUT jack
Connect an optional S-video cable here through the S-video in jack of a television.
2
3
4
5
COMPONENT VIDEO OUT jacks
Connect optional component video cable here through the component video in jacks of a television.
VIDEO OUT jack
Connect a yellow video cable here through the video in jack of a television.
AUDIO OUT jacks
Connect an audio cable here through the audio in jacks of a television or other audio device.
DIGITAL AUDIO OUT COAXIAL jack
Connect a digital audio coaxial cable here through the digital audio coaxial in jack of a decoder or audio receiver.
Note:
• Please purchase the necessary cables at your local store. (Refer to pages 6-7.)
EN
–
–
7
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Remote Control
Media
Remote Control
Button
(Alphabetical order)
1
4
7
2
5
8
0
3
6
• To select track directly. (CD)
• To select folder/file directly. (MP3)
OPEN/CLOSE
STANDBY-ON
• To select chapter or title directly.
SEARCH
MODE
9
DISPLAY
+10
AUDIO
SUBTITLE
ANGLE
REPEAT
1
4
2
5
8
0
3
6
ENTER
• To move the cursor and
determine its position.
• To move the cursor and
determine its position.
7
9
CLEAR
+10
A-B
• To repeat between your chosen
point of A and B.
• To repeat between your chosen
point of A and B.
-
B
A
SKIP
PAUSE
SLOW
FWD
ANGLE
AUDIO
PLAY
• To select camera angles on a disc.
------
REV
STOP
TOP MENU
• To select audio language on a
disc.
• To remove status number in
program input.
• To select “STEREO”, “L-ch” or
“R-ch”. (CD)
• To remove status number in
program input.
SETUP
MODE
ZOOM
MENU
ENTER
RETURN
CLEAR
• To clear the numbers entered
incorrectly.
• To clear the numbers entered
incorrectly.
• To cancel the point for A-B repeat. • To cancel the point for A-B repeat.
• To display the current disc mode. • To display the current disc mode.
• To search forward/backward
DISPLAY
through a disc.
• To search forward/backward
through a disc.
REV
FWD
• To begin slow forward
playback in the pause mode.
Installing the Batteries for the
Remote Control
MENU
MODE
• To call up the menu on a disc.
------
• To arrange the playing order or
play randomly.
• To set black level on/off.
Install batteries (AA x2) matching
the polarity indicated inside battery
compartment of the remote control.
• To arrange the playing order or
play randomly.
• To set virtual surround on/off.
• To set virtual surround on/off.
1
2
3
OPEN/CLOSE
PAUSE
• To open or close the disc tray.
• To turn on the unit.
• To open or close the disc tray.
• To turn on the unit.
• To pause disc playback.
• To advance playback one frame
at a time.
• To pause disc playback.
* Batteries not supplied.
• To begin disc playback.
• To turn on the unit.
• To begin disc playback.
• To turn on the unit.
• To play back a track or disc
repeatedly. (CD)
• To play back a file, folder or disc
repeatedly. (MP3)
• To return to the previous
operation in menu.
• To search tracks.
• To search time. (CD)
• To search folders. (MP3)
PLAY
Keep in mind the following when using
the remote control:
• Make sure that there are no obstacles
between the remote control and the
remote sensor on the unit.
• The maximum operable ranges from the
unit are as follows.
- Line of sight:
approx. 23 feet (7m)
- Either side of the center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
REPEAT
• To play back a chapter or title
repeatedly.
RETURN
• To return to the previous
operation in menu.
SEARCH
MODE
• To search chapter, title or time.
SETUP
SKIP
• To call up the setup menu.
• To skip chapters or titles.
• To call up the setup menu.
• To skip tracks. (CD)
• To skip folders or files. (MP3)
P-SCAN
OPEN/
CLOSE PLA
Y
STOP
IR
• To turn the unit on or to turn the • To turn the unit on or to turn the
STANDBY-ON
unit into the standby mode. (To
completely turn off the unit, you
unit into the standby mode. (To
completely turn off the unit, you
must unplug the AC power cord.) must unplug the AC power cord.)
STOP
Note:
• To stop playback.
• To stop playback.
• Do not mix alkaline and manganese
batteries.
SUBTITLE
• To select subtitles on a disc.
• To call up the top menu on a disc.
------
------
• Do not mix old and new batteries.
• Always remove batteries from remote
control if they are dead or if the
remote control is not to be used for
an extended period of time. This will
prevent battery acid from leaking into
the battery compartment.
TOP MENU
ZOOM
• To magnify part of a picture.
(2x / 3x / 4x / 1/2x)
------
EN
–
–
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD FUNCTIONS
Please note : most instructions in this manual refer to remote control use.
Playback
Lights up when power is on.
Before:
Turn on the TV, amplifier and any other
device which are connected to this unit.
Make sure the TV and audio receiver (not
supplied) are set to the correct channel.
P-SCAN
OPEN/
CLOSE PLAY STOP
IR
2
2
2 3 4 1
2
1
STANDBY-ON
OPEN/CLOSE
SEARCH
⇒
DISPLAY
MODE
Note:
on page 10
(
)
• When you play back a CD-RW/-R with MP3 files,
details on page 10.
AUDIO
SUBTITLE
ANGLE
REPEAT
1
4
2
5
8
0
3
6
1
2
Press [STANDBY-ON] to turn on this
• A “ ” may appear at the top-right on the TV
screen when the operation is prohibited by the disc or this
unit.
unit.
7
9
CLEAR
Press [OPEN / CLOSE A] and insert a
disc with label facing up.
+10
• Some DVD may start playback from title 2 or 3 due to specific
programs.
-
A
B
SKIP
PAUSE
SLOW
FWD
• During the playback of a 2-layered disc, pictures may stop for
a moment. This happens while the 1st layer is being switched
to the 2nd layer. This is not a malfunction.
• You can change the on-screen language in “PLAYER MENU”
setting. (Refer to page 14.)
3
4
Press [PLAY B] to start playback.
3
4
PLAY
REV
STOP
Press [STOP C] to stop playback.
Disc Menu
Fast Forward / Reverse Search
Some discs contain menus which allow you to customize DVD
playback. Use [K / L / s / B] to select an item, then press
[ENTER] (or [PLAY B]).
Use [FWD g] or [REV h] repeatedly during
playback to select the required forward or
E
1
reverse speed.
To continue playback, press [PLAY B].
Calling Up a Menu Screen during Playback
Note:
• Fast forward or reverse search speed is different depending
on the disc. Approximate speed is 1(2x), 2(4x), 3(8x), 4(16x)
and 5(32x).
• Press [MENU] to call up the disc menu.
• Press [TOP MENU] to call up the title menu.
Slow Forward Search
Note:
• Menu operations may vary depending on the disc. Refer to
the manual accompanying the disc for more details.
Press [FWD g] repeatedly in the pause mode
1
Resume Playback
to select the required forward speed.
To continue playback, press [PLAY B].
Note:
Press [STOP C] during playback. Resume icon
• Slow forward speed is different depending on the disc.
Approximate speed is 1(1/32x), 2(1/16x), 3(1/8x), 4(1/4x) and
5(1/2x).
will appear at the top-left on the TV screen. Press
R.STOP
[PLAY B], playback will resume from the point at
which playback was stopped.
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if pictures in
the slow playback mode are blurred. (Refer to pages 14-15.)
• The reverse of slow playback is not available.
Note:
• To cancel resume, press [STOP C] one more time in the stop
mode.
• For MP3, playback will resume from where you stopped (if
the power has been turned off, the playback will start from
the beginning of the track).
• The resume playback information stays on even when the
power is turned off, as long as the disc stays in the unit.
Zoom
1) Press [ZOOM] repeatedly during playback to select the
required zoom factor: 2x, 3x, 4x, 1/2x or off.
x2
x3
x4
x1/2
Paused and Step-by-Step Playback
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
PAUSE
2) Use [K / L / s / B] to slide the zoomed picture across the
screen.
3) To exit zoom function, press [ZOOM] repeatedly to select off.
The disc goes forward by one frame each time [PAUSE F]
is pressed in the pause mode.
Note:
To continue playback, press [PLAY B].
• Zooming function does not work while the disc menu is
displayed.
Note:
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if pictures in
the pause mode are blurred. (Refer to pages 14-15.)
• Some part of the picture may not be zoomed depending on
the disc or playback status.
EN
–
–
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 Playback
MP3 is a method of compressing files. You can copy MP3 files on CD-RW/-R from the
computer and play back the files on this unit.
Note:
• Some selections may take a while to be
recognized.
• Folders are known as groups; files are
known as tracks.
• MP3 files are accompanied by
• Folders are accompanied by
• Refer to “On-Screen Display” on page 11
for more details.
Insert a CD-RW/-R with MP3 files, then the file list will automatically appear on the TV screen.
3
icon.
icon.
1 Select the desired folder from the list on
2 Select the desired file from the list on
the left side in the file list.
the right side in the file list.
• If you record data over 20 times, it may
not be played back correctly.
This unit recommends the files recorded
under the following circumstances:
• Sampling frequency: 44.1kHz or 48kHz.
• Constant bit rate: 32kbps ~ 320kbps.
004/027
001/013
file name1
00:00:36
OFF
001/027
001/007
00:00:12
OFF
ENTER
ENTER
file name11
3
3
3
3
3
3
3
3
3
1. folder1
2. folder2
3. folder3
4. folder4
5. folder5
6. folder6
7. folder7
8. folder8
1. file name1
1. folder1
2. folder2
3. folder3
4. folder4
5. folder5
6. folder6
7. folder7
8. folder8
1. file name11
2. file name12
3
3
3
3
3
3
2. file name2
3. file name3
4. file name4
5. file name5
6. file name6
7. file name7
8. file name8
3. file name13
4. file name14
5. file name15
6. file name16
7. file name17
3 Refer to “Resume Playback” on
ENTER
ENTER
page 9.
or
PLAY
PLAY
Press [ENTER] or
[PLAY B].
or
STOP
Search Functions
Using Track Search
Using Title / Chapter Search
Using Time Search
Using [SEARCH MODE]
1
Using [SEARCH MODE]
1
1
PLAY
03/24
001/002
--:--
:
--
OFF
--/26
00:00:19
OFF
SEARCH
MODE
SEARCH
MODE
--/24
001/002
00:00:30
OFF
SEARCH
MODE
e.g.) DVD
e.g.) CD
or
Press cursor [B] to
highlight
2 Enter the desired track number
ENTER
.
within 5 seconds.
ENTER
CD: once
DVD: twice
1
4
7
2
5
8
0
3
--/26
00:00:19
OFF
6
Press [SEARCH MODE] once for the
title search.
For the chapter search, press
cursor [B] to highlight
9
+10
2 Enter the desired time within 5
.
seconds.
ENTER
3 Press [ENTER].
1
4
7
2
5
8
0
3
2 Enter the desired title or chapter
03/24
001/002
--:--
:
--
OFF
6
number within 5 seconds.
9
• To play back a double-digit track, press
the track number directly (e.g. for track
14, press [1], [4] and [ENTER]).
• To play back a triple-digit track, press
the track number directly for MP3. (e.g.
for track 114, press [1], [1], [4] and
[ENTER]).
+10
1
4
7
2
5
8
0
3
6
03/24
---/002
00:00:32
OFF
e.g.) DVD
9
+10
ENTER
3 Press [ENTER].
ENTER
3 Press [ENTER].
Note:
• To play time 0:15:00, press [1], [5], [0],
[0] of [the Number buttons].
• Press [CLEAR] to erase the incorrect
input at step 2.
Using [SKIP H , G]
Using [SKIP H , G]
1
1
PLAY
Current Track
PLAY
Current Chapter
• For DVD and audio CD, time search
is not available for programmed or
random playback.
TR 1 TR 2 TR 3 TR 4
SKIP
CH 1 CH 2 CH 3 CH 4
SKIP SKIP
SKIP
SKIP
SKIP
Note:
Note:
• For audio CD, track search is not available for
programmed or random playback.
• Depending on the disc being played
back, this function can also be performed
by directly entering the desired chapter
number with [the Number buttons].
Refer to the manual accompanying the disc.
• For DVD, title/chapter search is not available
for programmed or random playback.
EN
–
–
Download from Www.Somanuals.co1m0. All Manuals Search And Download.
On-Screen Display
You can check the information about the current disc by pressing [DISPLAY] on the remote control.
TR(Track):
T(Title):
current track number / total
tracks
current title number / total titles
current repeat setting
elapsed time of the current title
03/24
001/002
00:00:40
OFF
01/26
00:00:11
OFF
1
1
2
current repeat setting
elapsed time of the current track
DISPLAY
DISPLAY
C(Chapter):
current chapter number / total
chapters
TR(Track):
CH(Chapter):
current track number / total
tracks
current chapter number / total
chapters
remaining time of the current
remaining time of the current
chapter
track
001/002 00:00:19 - 00:01:11
NORMAL
01/26
00:00:12 - 00:03:20
NORMAL
2
3
current play mode setting
current play mode setting
DISPLAY
DISPLAY
elapsed time of the current
chapter
elapsed time of the current track
ALL:
TT(Title):
current track number / total
tracks
current title number / total titles
remaining time of the current
title
remaining time of the entire disc
3
4
03/24
00:00:20 - 00:01:09
NORMAL
01/26
00:00:14 - 01:11:28
NORMAL
current play mode setting
elapsed time of entire disc
current play mode setting
elapsed time of the current title
DISPLAY
DISPLAY
4
Note:
current folder number / total
folders
•
Some DVD will not allow you to set chapter playback correctly.
current file number / total files in
the current folder
elapsed time of the current file
current repeat setting
004/027
001/013
00:00:36
OFF
1
file name1
3
3
1. folder1
2. o
1. file name1
2. file name2
DISPLAY
TR(Track):
current file number / total files in
the current folder
elapsed time of the current file
remaining time of the current file
current play mode setting
001/013 00:00:43 - 00:03:36
NORMAL
2
3
file name1
3
1. folder1
2. fl
1. file name1
2. file name2
3
DISPLAY
file name1
3
3
3
1. folder1
2. f
1. file name1
2. file name2
EN
–
–
Download from Www.Somanuals.co1m1. All Manuals Search And Download.
Repeat / Random / Programmed Playback
Repeat Playback
Repeat A-B Playback
Programmed Playback
Repeat function is available only during
playback.
You may determine the order in which
chapters or tracks will play back.
1
PLAY
1
1 Press [MODE] once during stop
A-
mode.
PLAY
A-B
CHAPTER
MODE
NORMAL
RANDOM
PROGRAM
REPEAT
at your desired starting point (A)
e.g.) DVD
• During playback, press [MODE].
2
Each time you press [REPEAT], repeat
function changes as example below.
CD/MP3: twice
A-B
A-B
DVD:
three times
2 Select “PROGRAM”.
Then press [ENTER].
at your desired ending point (B)
• Point B should be in the same title or
track as point A.
(repeat off)
OFF
ENTER
ENTER
(current chapter repeat)
(current title repeat)
CHAPTER
TITLE
Note:
• To exit the sequence, press [A-B] so
that “OFF” appears.
DVD-PROGRAM
MAX:
2
Total:
3
TITLE CHAPTER PLAY ALL CLEAR
1
4
7
2
5
8
0
3
6
• To cancel point A, press [CLEAR] at
step 1.
• This function does not work in the
other repeat modes.
02 007
05 005
01 002
-- --- -- --- -- ---
-- --- -- --- -- ---
-- --- -- --- -- ---
9
(repeat off)
OFF
-- --- -- --- -- --- -- ---
-- --- -- --- -- --- -- ---
+10
TRACK
ALL
(current track repeat)
(entire disc repeat)
Random Playback
e.g.) DVD
• Up to 20 chapters or tracks can be
ordered.
• Enter the desired number with
[the Number buttons].
DVD: title and chapter number
CD: track number
This function shuffles the playing
order of chapters or tracks instead of
playback in the sequence.
(repeat off)
OFF
1 Press [MODE] once during stop
MP3: folder and file number
mode.
(current file repeat)
(current folder repeat)
(entire disc repeat)
TRACK
GROUP
ALL
3 Select “PLAY”.
MODE
NORMAL
RANDOM
PROGRAM
Then press [ENTER].
ENTER
ENTER
• During playback, press [MODE].
CD/MP3: twice
DVD:
three times
Note:
• Repeat setting (except “ALL”) will be
cleared when moving to another title,
chapter, track/file or folder.
• This function is not available with
some discs or during repeat A-B
playback.
Note:
2 Select “RANDOM”.
• To erase all program at once, select
“ALL CLEAR’’ and press [ENTER] or press
[CLEAR] at step 2.
Then press [ENTER].
ENTER
ENTER
• If the title, chapter, track number is
incorrect, the programmed number
you entered will be skipped during
programmed playback.
• While a program is being played back,
[STOP C] works as follows;
Random playback will start.
Press [STOP C] and [PLAY B] next, so that
the programmed playback restarts.
Press [STOP C] twice and [PLAY B] next,
so that playback restarts from the first track
in the original order.
However, your programmed playback can
be restarted when you follow the above
steps. (Your programs are still stored until
either the disc is removed or power is
turned off.)
Note:
• During random playback, you cannot
go back to the previous track, using
[SKIP G] allows you to search
chapters or tracks randomly.
• During DVD random playback, you can
play back chapters in the current title
randomly.
• Some DVD will not allow you to set
programmed playback.
• During programmed playback, you cannot
• Some DVD will not allow you to set
random playback.
setup “
(MP3).
TITLE’’ (DVD), “
GROUP’’
EN
–
–
Download from Www.Somanuals.co1m2. All Manuals Search And Download.
Special Settings
Subtitle Language
Each time you press [AUDIO], audio
language changes as example below.
Stereo Sound Mode
ENG (English audio)
SPA (Spanish audio)
FRE (French audio)
This unit allows you to select a subtitle
language (if available) during DVD
playback.
This unit allows you to select a sound
mode during CD playback.
1
PLAY
1
STEREO
PLAY
1. ENG/6
AUDIO
Note:
SUBTITLE
• Some discs will only allow you to change
the audio setting from the disc menu. Refer
to the manual accompanying the discs for
details.
• If your language is not shown after pressing
[AUDIO] several times, the disc may not have
that language. However, some discs allow
audio language setting on the disc menu.
(Operation varies depending on the disc, so
refer to the manual along with the disc.)
Each time you press [AUDIO], sound
mode changes as example below.
Each time you press [SUBTITLE], subtitle
language changes as example below.
STEREO (right and left channels
are active)
OFF (no subtitles)
L-ch
(left channel is active)
(right channel is active)
ENG (English subtitles)
FRE (French subtitles)
R-ch
Camera Angles
Virtual Surround
Some DVD may contain
You can enjoy stereophonic virtual world
on your existing 2 channel stereo system.
scenes which have been shot
simultaneously from various
angles. You can change the
To set subtitle ON/OFF
1
PLAY
1
camera angle if
appears on the
PLAY
1. ENG/6
screen. If the “ANGLE ICON” setting is
OFF
“OFF” in “OTHERS” menu,
appear. (Refer to pages 14-16.)
will not
SUBTITLE
MODE
1
PLAY
2
Press twice.
OFF
ENTER
1/8
(once for CD and MP3)
ANGLE
2 Using [s / B], you can select the
desired sound mode.
Note:
• If your language is not shown after
pressing [SUBTITLE] several times,
the disc may not have that language.
However, some discs allow subtitle
language setting on the disc menu.
(Operation varies depending on the
disc, so refer to the manual along with
the disc.)
Each time you press [ANGLE], camera
ENTER
ROCK
angle changes.
Black Level Setting
3D:
sound mode suitable for setting
stereophonic audio.
sound mode suitable for jazz music
JAZZ:
ROCK: sound mode suitable for rock music
POP: sound mode suitable for pop music
CLASSIC: sound mode suitable for classic music
• When “ ” appears on the TV screen,
it means no subtitle is recorded on the
scene.
• Some discs will only allow you
to change the subtitle from the
disc menu. Refer to the manual
accompanying the discs for details.
Adjust the black level to make the dark
areas of the TV picture brighter.
OFF:
no effects (original sound)
1
PLAY
3
RETURN
ON
MODE
Audio Language
Note:
• Virtual surround is available only when
the DVD player is connected to a TV or
stereo using the red and white AUDIO
OUT jacks on the DVD player. Also,
select the “SETUP” menu to use Dolby
Digital connection (COAXIAL), and
setting in PCM mode.
2
This unit allows you to select an audio
language (if multiple languages are
available on disc) during DVD playback.
OFF
ENTER
1
ON: makes the dark areas brighter.
OFF: shows the original picture as recorded.
PLAY
1. ENG Dolby D 5.1ch 48k/3
3
RETURN
AUDIO
EN
–
–
Download from Www.Somanuals.co1m3. All Manuals Search And Download.
DVD Setting
You can change the settings of the unit.
1 Press [SETUP].
2 Select the desired item.
SETUP
ENTER
ENTER
<SETUP MENU>
LANGUAGE
LANGUAGE
AUDIO
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
SUBTITLE
DISC MENU
PLAYER MENU
LANGUAGE menu
DISPLAY menu
AUDIO menu
PARENTAL menu
OTHERS menu
INITIALIZE menu
LANGUAGE_AUDIO
DISPLAY_TV ASPECT
AUDIO_DRC
PARENTAL_PASSWORD
OTHERS_ANGLE ICON
INITIALIZE_INITIALIZE
AUDIO
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
OFF
PASSWORD
NO
YES
ANGLE ICON
AUTO POWER OFF
ON
OFF
INITIALIZE
YES
SUBTITLE
DISC MENU
PLAYER MENU
SWEDISH
OTHERS
page 14
page 15
page 15
page 16
page 16
page 17
A
B
C
D
E
F
LANGUAGE Setting
A
Follow steps 1 to 2 above.
3 Select the desired item.
4 Select the desired language.
5 To exit the menu
ENTER
SETUP
ENTER
ENTER
ENTER
Note:
∗1
LANGUAGE menu
LANGUAGE_AUDIO
• Language options are not
available with some discs.
• If “OTHERS” is selected in the
“AUDIO”, “SUBTITLE” or
AUDIO: ∗1 ∗2
(Default: ORIGINAL)
Sets the audio
language.
AUDIO
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SUBTITLE
DISC MENU
PLAYER MENU
LANGUAGE_AUDIO
AUDIO
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
OTHERS
SUBTITLE
DISC MENU
PLAYER MENU
“DISC MENU” screen, select the
desired language using
[K / L / s / B]. Press [ENTER].
LANGUAGE_AUDIO
LANGUAGE_SUBTITLE
SUBTITLE: ∗1 ∗2
(Default: OFF)
Sets the subtitle
language.
AUDIO
OFF
SWEDISH
OTHERS
SUBTITLE
DISC MENU
PLAYER MENU
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
OTHERS
DUTCH
RUSSIAN
KOREAN
CHINESE
DANISH
JAPANESE
FINNISH
ROMANIAN
IRISH
NORWEGIAN
TURKISH
ICELANDIC
GREEK
PORTUGUESE POLISH
HUNGARIAN
LANGUAGE_DISC MENU
CZECH
DISC MENU: ∗1
(Default: ENGLISH)
Sets the language in
DVD menu.
AUDIO
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
DUTCH
SUBTITLE
DISC MENU
PLAYER MENU
• Only the languages supported by
the disc can be selected.
∗2
OTHERS
• “LANGUAGE” setting for “AUDIO”
and “SUBTITLE” are not available
with some discs. Then press
[AUDIO] and [SUBTITLE]. Details
are on page 13.
LANGUAGE_PLAYER MENU
PLAYER MENU
(Default: ENGLISH)
Sets the language
for the on-screen
display.
AUDIO
ENGLISH
FRANÇAIS
SUBTITLE
DISC MENU
PLAYER MENU
ESPAÑOL
EN
–
–
Download from Www.Somanuals.co1m4. All Manuals Search And Download.
DISPLAY Setting
B
You can change the display functions. Follow steps 1 to 2 on page 14.
3 Select the desired item.
5 To exit
TV ASPECT: (Default: 4:3 LETTER BOX)
“TV ASPECT” or
See note on the left.
DISPLAY_TV ASPECT
Select the
desired
“STILL MODE”
menu
ENTER
ENTER
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
setting.
SETUP
ENTER
ENTER
DISPLAY menu
To complete
“PROGRESSIVE”
setting
STILL MODE: (Default: AUTO)
See note on the left.
DISPLAY_STILL MODE
Select the
desired
DISPLAY_TV ASPECT
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
setting.
ENTER
TV ASPECT
STILL MODE
PROGRESSIVE
AUTO
FIELD
FRAME
AUTO
FIELD
FRAME
ENTER
ENTER
ENTER
Note:
PROGRESSIVE: (Default: OFF)
Select
“ON”.
See note on the right.
TV ASPECT:
DISPLAY_PROGRESSIVE
•
•
•
Select “4:3 LETTER BOX”, so that
black bars may appear on the top
and bottom of the screen.
SETUP
TV ASPECT
STILL MODE
PROGRESSIVE
OFF
ON
OFF
ON
ENTER
Note:
PROGRESSIVE:
Select “4:3 PAN & SCAN” for a full
height picture with both sides
adjusted.
ENTER
•
You can set
“PROGRESSIVE” to
“OFF” in “DISPLAY”
menu or press and
hold [PLAY B] on the
front of the unit for
more than 5 seconds
during playback, so
that the P- SCAN
Select “16:9 WIDE” if a wide-screen
TV is connected to this unit.
STILL MODE:
•
•
Select “Yes”.
Before proceeding…
1. Make sure your TV has progressive scan.
2. Connect with component video cable
Select “AUTO” usually.
ENTER
NOTE: If there is no picture or picture is
distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
If you select “AUTO”, it automatically
If there is no picture or
you do not press any
selects the best resolution setting
Activate Progressive?
NO
YES
(“FRAME” or “FIELD”) based on the data
characteristics of the pictures. (default)
SELECT:
K
/
L
SET:ENTER
buttons for 15 seconds,
“PROGRESSIVE” will
switch to “OFF” and it
will exit the “SETUP”
menu.
•
•
•
If you select “FIELD”, the picture in
indicator on the front
panel turns off.
ENTER
the still mode will be stabilized.
If you select “FRAME”, the picture in
the still mode will be highly defined.
•
When “PROGRESSIVE”
is “ON”, video signals
from the unit’s VIDEO
OUT and S-VIDEO OUT
jacks will be distorted
or not be output at all.
Select “Yes”.
An individual picture on TV screen
is called a “frame”, which consists of
two separate images called as “field”.
Confirm again to use progressive scan.
If Picture is good, select ‘YES’.
ENTER
NO
YES
•
Some pictures may be blurred if
you select “AUTO” in the still mode
due to their date characteristics.
SET:ENTER
SELECT:
K
/
L
AUDIO Setting
C
Choose the appropriate audio settings for your device. It only affects during the playback of DVD. Follow steps 1 to 2 on page 14.
3 Select the desired item.
5 To exit the menu
DRC (Dynamic Range Control): (Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
SETUP
ENTER
Select the
AUDIO_DRC
desired
setting.
ENTER
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
OFF
ON
OFF
Note:
ENTER
DRC:
ENTER
AUDIO menu
• This function is
available only on
the discs which are
recorded in the Dolby
Digital format.
AUDIO_DRC
DOWN SAMPLING: (Default: ON)
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
OFF
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
DOWN SAMPLING:
• When playing back
disc with copyright
protection, the sound
will be down sampled
at 48kHz, even if you
set to “OFF”.
Select the
desired
setting.
AUDIO_DOWN SAMPLING
ENTER
DRC
ON
OFF
ON
OFF
DOWN SAMPLING
DOLBY DIGITAL
ENTER
ENTER
DOLBY DIGITAL: (Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs a Dolby Digital signals.
• PCM: convert the Dolby Digital into PCM (2 channel).
AUDIO_DOLBY DIGITAL
Select the
DRC
DOWN SAMPLING
DOLBY DIGITAL
BITSTREAM
PCM
BITSTREAM
PCM
desired
ENTER
setting.
ENTER
ENTER
EN
–
–
Download from Www.Somanuals.co1m5. All Manuals Search And Download.
PARENTAL Setting
D
Parental control limits the disc viewing that exceed your settings. (An incorrect password will not be acceptable.)
This feature prevents your children from viewing inappropriate materials.
Parental Levels
Parental level allows you to set the rating levels of your DVD. Playback will stop if the ratings exceed the levels you set.
Follow steps 1 to 2 on page 14.
3 Press [ENTER], and then
4 Enter your desired
5 Select “LEVEL”.
6 Select the desired
level, and press
[ENTER].
ENTER
ENTER
ENTER
select “YES”.
4-digit password.
1
4
7
2
5
8
0
3
6
ENTER
ENTER
ENTER
ENTER
9
If the password has not
been set yet.
PASSWORD
NO
YES
PASSWORD
LEVEL
CHANGE
PASSWORD
LEVEL
CHANGE
Enter password
- - - -
PARENTAL menu
8 [ADULT]
PARENTAL_PASSWORD
TIPS FOR LEVELS
PASSWORD
NO
YES
Enter a new
password again.
• 8 [ADULT]: DVD software of any grades (adult/general/
children) can be played back.
• 7 [NC-17]: no one under 17 admitted
If the password has been set
already, enter the current
4-digit password.
PASSWORD
NO
YES
• 6 [R]:
restricted; under 17 requires accompanying
parent or adult guardian
Re-enter password
- - - -
• 5 [PGR]:
• 4 [PG13]:
• 3 [PG]:
• 2 [G]:
parental guidance recommended
unsuitable for children under 13
parental guidance suggested
general audience
PARENTAL menu
PARENTAL_CHANGE
• 1 [KID SAFE]: suitable for children
PASSWORD
LEVEL
CHANGE
Enter password
- - - -
Note:
7 To exit the menu
• For DVD, the resume information will be
cleared if you change the parental level when
the resume information is on.
SETUP
If you do not need pa-
rental lock, choose “NO”.
Press [ENTER].
To Change the Password for Parental Controls
You can change your password for parental controls. Follow steps 1 to 2 on page 14.
ENTER
ENTER
6 Select “CHANGE” at step 5
7 Enter your desired
8
Enter your new 4-digit
password again.
9 To exit the menu
above.
4-digit password.
SETUP
1
4
7
2
5
8
0
3
6
1
4
7
2
5
8
0
3
6
PARENTAL menu
Note:
9
9
• Record the password in case
you forget it.
PARENTAL_CHANGE
PASSWORD
LEVEL
CHANGE
•
If you forget the password,
press [4], [7], [3], [7] at step 3
above, then enter your new
password. Password will be
cleared and parental levels
will be set to “8 [ADULT]”.
PASSWORD
LEVEL
PASSWORD
LEVEL
CHANGE
CHANGE
Enter new password
- - - -
Re-enter password
- - - -
OTHERS Setting
E
You can change the other functions. Follow steps 1 to 2 on page 14.
3 Select the desired item.
4
5 To exit the menu
(Default: ON)
ANGLE ICON:
SETUP
Set to “ON” to display when
Select the
desired
ENTER
multiple camera angles are available
during DVD playback.
setting.
ENTER
ANGLE ICON
ON
ON
AUTO POWER OFF
OFF
OFF
ENTER
ENTER
OTHERS menu
(Default: ON)
AUTO POWER OFF:
OTHERS_ANGLE ICON
Select the
desired
Set to “ON” to turn this unit off
ANGLE ICON
AUTO POWER OFF
ON
OFF
automatically after 30 minutes of no use.
setting.
ENTER
ANGLE ICON
ON
ON
AUTO POWER OFF
OFF
OFF
ENTER
ENTER
EN
–
–
Download from Www.Somanuals.co1m6. All Manuals Search And Download.
Reset to the Default Setting (Except for PARENTAL Setting)
F
1 Press [SETUP].
2 Select “INITIALIZE”.
3
Select the desired PLAYER
MENU Language, using
[the Number buttons].
Note:
• When you do not
wish to initialize,
press [SETUP] to
exit the menu at
step 2.
SETUP
ENTER
STOP
ENTER
<SETUP MENU>
Press
twice.
SELECT MENU LANGUAGE
LANGUAGE
INITIALIZE_INITIALIZE
1
2
3
ENGLISH
FRENCH
SPANISH
AUDIO
INITIALIZE
YES
SUBTITLE
DISC MENU
PLAYER MENU
INFORMATION
Troubleshooting Guide
If the unit does not perform properly when operated as instructed in this owner’s manual, refer to the following.
Problem
No power
Corrective action
–Check if the AC power cord is properly connected.
–Unplug the outlet once, and wait for 5-10 seconds and then plug it in again.
–Check if the TV is switched on.
–Check the video connection.
No sound or picture
Distorted picture
–Check the audio/video cable connections to the TV.
(Refer to page 6.)
–Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
–Connect the unit directly to the TV.
–Set “PROGRESSIVE” correctly in “DISPLAY” menu. Turn it on only if your TV has progressive scan and
you are using the component video connections between the unit and the TV. Disable progressive
scan for all other connections. (Refer to page 6.)
Completely distorted picture or
black/white picture with DVD
–Connect this unit directly to the TV.
–Make sure the disc is compatible with the unit.
–Adjust the volume.
No sound or distorted sound
No audio at digital output
No DTS audio is output.
–Check that the speakers are connected correctly.
–Check the digital connections.
–Check if the audio format of the selected audio language matches your receiver capabilities.
–This unit does not support DTS audio.
This is not a malfunction.
Picture freezes momentarily during
playback.
–Check the disc for fingerprints/dirty and clean with a soft cloth wiping from center to edge.
–Clean the disc.
–Ensure the disc is inserted in correct direction.
–Check if the disc is defective by trying another disc.
–Cancel the parental lock or change the control level.
–Insert a correct disc that plays back on this unit.
–Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
Disc cannot be played back.
No return to start-up screen when
disc is removed.
–Reset the unit by switching off the unit, then on again.
–Aim the remote control directly at the sensor on the front panel.
–Reduce the distance to the unit.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
–Tune your radio to an empty AM station so that you hear a lot of noises. Then, turn up the volume. If
you hear some signal sound from the radio by pressing buttons on the remote control, the remote
control is working.
–Press and hold any button on remote control toward a digital camera. The remote control is working if
you confirm infrared light through the digital camera.
The unit does not respond to
the remote control.
Buttons do not work or the unit stops
responding.
–To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds.
The unit does not respond to some
operating commands during playback.
–Operations may not be permitted by the disc. Refer to the instructions of the disc.
The unit cannot read CD / DVD.
–Use a commonly available cleaning CD / DVD to clean the lens before sending the unit for repair.
–The angle cannot be switched for DVD which do not contain multiple angles. In some cases multiple
angles are only recorded for specific scenes.
Angle does not switch.
Playback does not start
when the title is selected.
–Check the “PARENTAL” setting.
The password for rating level
has been forgotten.
–Enter the default password “4737”, then your forgotten password will be cleared.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s manual for
more details on correct operations.
• Playback from a desired track and random playback are not available during programmed playback.
• Some functions are prohibited on some discs.
EN
–
–
Download from Www.Somanuals.co1m7. All Manuals Search And Download.
Specifications
• Designs and specifications are subject to
change without notice.
• If there is a discrepancy between languages,
the default language will be English.
Output signal format:
NTSC color
Power source:
120V AC +/- 10%, 60Hz +/- 0.5%
Power consumption:
7W (standby : 0.9W)
Operating temperature:
41°F (5°C) to 104°F (40°C)
Dimensions:
W : 8 5/16”
(210mm)
(50mm)
H
D
: 2”
: 9 11/16”
(245mm)
Weight:
Approx 1.8lbs. (0.8kg)
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the
USA in the event of defect in materials or workmanship as
follows:
CONSEQUENTIAL DAMAGES ARISING OUT OF OR
OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER
LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANTABILITY,
AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE
UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS
MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO
AN AUTHORIZED SERVICE CENTER.
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective
parts without charge for one (1) year from the date
of original retail purchase. Certain parts are excluded
from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge
for a period of ninety (90) days from the date of
original retail purchase.
IMPORTANT:
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser.
A purchase receipt or other proof of original retail purchase
will be required together with the product to obtain service
under this warranty.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.
YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO
STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD,
YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE
REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
This warranty shall not be extended to any other person or
transferee.
This warranty is void and of no effect if any serial numbers
on the product are altered, replaced, defaced, missing or if
service was attempted by an unauthorized service center.
This limited warranty does not apply to any product not
purchased and used in the United States.
This product is produced for home use and this warranty only
covers failures due to defects in material or workmanship
which occurs during normal use. It does not cover damage
which occurs in shipment, or failures which are caused by
repairs, alterations or product not supplied by FUNAI CORP.,
or damage which results from accident, misuse, abuse,
mishandling, misapplication, alteration, faulty installation,
improper maintenance, commercial use such as hotel, rental
or office use of this product or damage which results from
fire, flood, lightning or other acts of God.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN
OF THIS PRODUCT WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED
REPAIRS:
To obtain warranty service, you must take the product, or
deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of
protection, to any AUTHORIZED SERVICE CENTER. FUNAI
CORP. will not reimburse you for any service done by
unauthorized service providers without prior written
approval.
To locate your nearest AUTHORIZED SERVICE CENTER or
for general service inquiries, please contact us at:
THIS WARRANTY DOES NOT COVER PACKING MATERIALS,
ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR
FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL
IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR
FUNAI SERVICE CORPORATION
Tel :1-800-605-8610
2200 Spiegel Drive, Groveport, OH 43125
EN
–
–
Download from Www.Somanuals.co1m8. All Manuals Search And Download.
Español
Conexiones
Reproducción
1
4
Antes.
Si su televisor tiene entradas de
AUDIO/VIDEO vea la sección
“Connection to a TV” en la página 6 en el
manual de manejo. En caso contrario, vea
la sección “Connecting to RF Modulator
(Not Supplied)” en la página del frente en
el manual de manejo.
¡Encienda el televisor, amplifica-
dor y otros equipos conectados
a esta unidad. Asegúrese que el
televisor y el
1 Para abrir o cerrar 2 Ponga un disco
la bandeja del
disco
con la etiqueta
hacia arriba.
STANDBY-ON
OPEN/CLOSE
sintonizador
de audio (no
provisto) están
en el canal cor-
recto.
OPEN/CLOSE
STANDBY-ON
SEARCH
DISPLAY
MODE
1
1
4
AUDIO
SUBTITLE
ANGLE
REPEAT
A-B
1
4
2
5
8
0
3
6
7
9
CLEAR
3 Para empezar la 4 Para parar la
+10
PAUSE
SKIP
Instalación de las pilas en el
control remoto
reproducción
reproducción
2
SLOW
FWD
PLAY
STOP
3
REV
PLAY
STOP
1
2
3
Control remoto
5
Disco
(Orden alfabético)
Botón
1
4
7
2
5
8
0
3
6
• Para seleccionar directamente la canción.
(CD)
• Para seleccionar directamente el grupo/
canción. (MP3)
• Para seleccionar directamente el capítulo o
título.
* Pilas no provistas.
9
+10
Para cambiar el idioma en la
pantalla
3
ENTER
• Para mover el cursor y determinar la posición. • Para mover el cursor y determinar la posición.
1 Confirme que ha seleccionado
A-B
• Para repetir entre su punto A y B
seleccionado.
• Para repetir entre su punto A y B
seleccionado.
“LANGUAGE”.
SETUP
STANDBY-ON
ANGLE
AUDIO
• Para seleccionar los ángulos de la cámara en
un disco.
------
STOP
• Para seleccionar idiomas de audio en un
disco.
• Para seleccionar “ESTÉREO”, “L-ch” o “R-ch”.
(CD)
• Para eliminar el Nº de estado en la entrada de • Para eliminar el Nº de estado en la entrada de
LANGUAGE
CLEAR
programa.
programa.
AUDIO
• Para borrar los números mal entrados.
• Para borrar el punto para la repetición A-B.
• Para borrar los números mal entrados.
• Para borrar el punto para la repetición A-B.
SUBTITLE
DISC MENU
PLAYER MENU
DISPLAY
• Para mostrar el modo de disco actual.
• Para mostrar el modo de disco actual.
•
Para buscar en avance/retroceso por un disco.
ENTER
• Para buscar en avance/retroceso por un
disco.
REV
FWD
• Para empezar la reproducción en avance
lento durante el modo de pausa.
MENU
MODE
• Para llamar el menú en un disco.
------
2 Seleccione “PLAYER MENU”.
• Para disponer el orden de reproducción o la
reproducción aleatoria.
• Para disponer el orden de reproducción o la
reproducción aleatoria.
• Para activar/desactivar el ambiental virtual.
• Para activar/desactivar el nivel del negro.
•
Para activar/desactivar el ambiental virtual.
ENTER
LANGUAGE_PLAYER MENU
OPEN/CLOSE
PAUSE
AUDIO
ENGLISH
FRANÇAIS
ESPAÑOL
• Para abrir o cerrar la bandeja del disco.
• Para encender la unidad.
• Para abrir o cerrar la bandeja del disco.
• Para encender la unidad.
SUBTITLE
DISC MENU
PLAYER MENU
• Para hacer una pausa en la reproducción.
• Para hacer una pausa en la reproducción del
disco.
•
Para avanzar la reproducción un cuadro cada vez.
•
Para empezar la reproducción del disco.
• Para empezar la reproducción del disco.
• Para encender la unidad.
ENTER
PLAY
• Para encender la unidad.
• Para reproducir repetidamente una canción o
disco. (CD)
REPEAT
• Para reproducir repetidamente un capítulo o
título.
3 Seleccione el idioma deseado para las
• Para reproducir repetidamente una cansión,
grupo o disco. (MP3)
indicaciones en la pantalla.
RETURN
• Para volver a la operación anterior en el
menú.
• Para volver a la operación anterior en el
menú.
LANGUAGE_PLAYER MENU
AUDIO
ENGLISH
FRANÇAIS
ESPAÑOL
ENTER
SEARCH
MODE
• Para buscar una canción.
• Para buscar el tiempo. (CD)
• Para buscar los grupos. (MP3)
SUBTITLE
DISC MENU
PLAYER MENU
• Para buscar un capítulo, título o tiempo.
SETUP
SKIP
•
Para llamar el menú de ajustes de DVD.
• Para llamar el menú de ajustes de DVD.
ENTER
SETUP
• Para saltar canciones. (CD)
• Para saltar los grupos o canciones. (MP3)
• Para saltar capítulos o titulo.
STANDBY-ON
• Para encender o para pasar la unidad al modo de • Para encender o para pasar la unidad al modo de
espera. (Para apagar completamente la unidad, espera. (Para apagar completamente la unidad,
debe desconectar el cable de alimentacion de CA.) debe desconectar el cable de alimentacion de CA.)
4 Para salir del menú
STOP
• Para parar la reproducción.
• Para parar la reproducción.
------
SUBTITLE
• Para seleccionar subtítulos en un disco.
TOP MENU
ZOOM
• Para llamar el menú inicial en un disco.
------
------
• Para ampliar la imagen de vídeo en DVD.
(2x / 3x / 4x / 1/2x)
ES
–
–
Download from Www.Somanuals.co1m9. All Manuals Search And Download.
Quick Use Guide
Connections
Playback
1
4
Before:
If your TV has AUDIO/VIDEO input jacks,
see the section “Connection to a TV” on
page 6 of the owner’s manual. If not, see
the section “Connecting to RF Modulator
(Not Supplied)” on the front page of the
owner’s manual.
Turn on the TV, amplifier and
any other device which are
connected to this unit. Make
sure the TV and
1 To open the disc 2 Insert a disc with
tray
label facing up.
OPEN/CLOSE
audio receiver
OPEN/CLOSE
STANDBY-ON
SEARCH
MODE
STANDBY-ON
DISPLAY
(not supplied)
are set to the
correct channel.
1
1
4
AUDIO
SUBTITLE
ANGLE
REPEAT
A-B
1
4
2
5
8
0
3
6
7
9
CLEAR
Installing the Batteries for
the Remote Control
+10
2
3 To start playback 4 To stop playback
PAUSE
SKIP
SLOW
FWD
PLAY
STOP
3
REV
PLAY
STOP
1
2
3
Remote Control
5
Button
Media
(Alphabetical order)
1
4
7
2
5
8
0
3
6
* Batteries not supplied.
To Change the
• To select track directly. (CD)
• To select folder/file directly. (MP3)
• To select chapter or title directly.
9
+10
3
On-Screen Language
ENTER
• To move the cursor and determine its
position.
• To move the cursor and determine its
position.
1 Confirm that “LANGUAGE” is selected.
A-B
SETUP
• To repeat between your chosen point of A
and B.
• To repeat between your chosen point of A
and B.
STANDBY-ON
STOP
ANGLE
AUDIO
• To select camera angles on a disc.
• To select audio language on a disc.
------
• To select “STEREO”, “L-ch” or “R-ch”. (CD)
LANGUAGE
AUDIO
• To remove status number in program input. • To remove status number in program input.
CLEAR
SUBTITLE
DISC MENU
PLAYER MENU
• To clear the numbers entered incorrectly.
• To cancel the point for A-B repeat.
• To clear the numbers entered incorrectly.
• To cancel the point for A-B repeat.
DISPLAY
• To display the current disc mode.
• To display the current disc mode.
• To search forward/backward through a disc.
• To begin slow forward playback in the pause
mode.
REV
FWD
• To search forward/backward through a disc.
------
ENTER
MENU
MODE
• To call up the menu on a disc.
2 Select “PLAYER MENU”.
• To arrange the playing order or play
randomly.
• To set black level on/off.
• To arrange the playing order or play
randomly.
• To set virtual surround on/off.
• To set virtual surround on/off.
ENTER
OPEN/CLOSE
PAUSE
LANGUAGE_PLAYER MENU
• To open or close the disc tray.
• To turn on the unit.
• To open or close the disc tray.
• To turn on the unit.
AUDIO
ENGLISH
FRANÇAIS
ESPAÑOL
SUBTITLE
DISC MENU
PLAYER MENU
• To pause disc playback.
• To advance playback one frame at a time.
• To pause disc playback.
• To begin disc playback.
• To turn on the unit.
• To begin disc playback.
• To turn on the unit.
• To play a back track or disc repeatedly. (CD)
• To play back a file, folder or disc
repeatedly. (MP3)
PLAY
ENTER
REPEAT
• To play back a chapter or title repeatedly.
RETURN
• To return to the previous operation in menu. • To return to the previous operation in menu.
• To search tracks.
3 Select the desired language for the
on-screen language.
SEARCH
MODE
• To search chapter, title or time.
• To search time. (CD)
LANGUAGE_PLAYER MENU
• To search folders. (MP3)
ENTER
AUDIO
ENGLISH
FRANÇAIS
ESPAÑOL
SUBTITLE
DISC MENU
PLAYER MENU
SETUP
SKIP
• To call up the setup menu.
• To skip chapters or titles.
• To call up the setup menu.
• To skip tracks. (CD)
• To skip folders or files. (MP3)
STANDBY-ON
• To turn the unit on or to turn the unit into the • To turn the unit on or to turn the unit into the
ENTER
SETUP
standby mode. (To completely turn off the
unit, you must unplug the AC power cord.)
standby mode. (To completely turn off the
unit, you must unplug the AC power cord.)
STOP
• To stop playback.
• To stop playback.
------
4 To exit the menu
SUBTITLE
• To select subtitles on a disc.
TOP MENU
ZOOM
• To call up the top menu on a disc.
------
------
• To magnify part of a picture.
(2x / 3x / 4x / 1/2x)
E6K0AUD
1VMN27853 ★★★★★
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|