User Manual
Manuel de l'utilisateur
Guía del usuario
51MP6200D
51" Rear Projection TV
51" Téléviseur à Projection
51" Televisión de Proyección
Quick Use Guide Inside!
Guide d'usage Rapide Incluse!
Guía de Uso Rápido Incluida!
For Customer Use / À l’usage du client /
Para Uso del Cliente
Model/Modle/ModeloNo.
Serial/Srie/Serie No
:
:
3139 125 36731
Download from Www.Somanuals.com. All Manuals Search And Download.
AE: Set-Top Box toTV
FR: Boîtier de décodage
vers téléviseur
1
ES: De la caja superior
o caja de cable alTV
HDMI
OR/OU/O
RF
Details refer to page 21.
/Détails, consultez le page 21.
/Para detalles, consulte la pag. 21.
AE: DVD Player/Recorder toTV
2
FR: Lecteur DVD/Enregistreur
DVD vers le téléviseur
ES: Del reproductor o grabador
de DVD
HDMI
Details refer to page 21.
/Détails, consultez le page 21.
/Para detalles, consulte la pag. 21.
Download from Www.Somanuals.com. All Manuals Search And Download.
AE: DVD Player or Recorder toTV
FR: Lecteur DVD ou Enregistreur
vers le téléviseur
3
ES: Del reproductor o
grabador de DVD alTV
ComponentVideo Input
/Entrée vidéo composant
/Entrada de video
componente
C
Remote Control
Télécommande
Control remoto
AV Button
Bouton AV
Botón AV
Details refer to page 21.
/Détails, consultez le page 21.
/Para detalles, consulte la pag. 21.
AE: DVD Player/Recorder/VCR
toTV
FR: Lecteur DVD/Enregistreur
DVD/Magnétoscope vers le
téléviseur
4
S-Video Input
Entrée S-Vidéo
Entrada S-Video
ES: Del reproductor/grabador de
DVD/VCR alTV
Back ofTV
Arrière duTéléviseur
Parte posterior del TV
Video
Vidéo
/S-Video
C
Back of DVD/VCR
Arrière du DVD/Magnétoscope
Parte posterior del DVD/VCR
Remote Control
Details refer to page 22.
/Détails, consultez le page 22.
/Para detalles, consulte la pag. 22.
AV Button
Bouton AV
Botón AV
Télécommande
Control remoto
Download from Www.Somanuals.com. All Manuals Search And Download.
AE: DVD Player/Recorder/VCR
toTV
FR: Lecteur DVD/Enregistreur
DVD/Magnétoscope vers le
téléviseur
5
Composite Audio/video Input
Entrée Audio/Vidéo composite
Entrada Audio/Video compuesto
ES: Del reproductor/grabador de
DVD/VCR alTV
Back ofTV
Arrière duTéléviseur
Parte posterior del TV
Composite Audio-video
/Audio-Vidéo composite
/Audio-Video compuesto
C
Back of DVD/VCR
Arrière du DVD/Magnétoscope
Parte posterior del DVD/VCR
Remote Control
Télécommande
Control remoto
Details refer to page 22.
/Détails, consultez le page 22.
/Para detalles, consulte la pag. 22.
AV Button
Bouton AV
Botón AV
TV Side Jack Panel
/Tableau de connexions du
téléviseur
AE: Video Camera /Games
Console toTV
FR: Caméra vidéo/Console de
jeux vers téléviseur
6
/Panel de enchufes delTV
ES: De la cámara de video/
Consola de juegos alTV
omposite Audio-video
udio-Vidéo composite
udio-Video compuesto
Video Camera Jack Panel
/Panneau de connexions
de la caméra vidéo
/Panel de enchufes de la
cámara de video
C
Remote Control
AV Button
/Bouton AV
/Botón AV
Details refer to page 22.
/Détails, consultez le page 22.
/Para detalles, consulte la pag. 22.
/Télécommande
/Control remoto
Download from Www.Somanuals.com. All Manuals Search And Download.
AE: Audio to Hi-fi System (Digital)
FR: Audio vers chaîne haute fidélité (Numérique)
ES: Audio al sistema Hi-fi (Digital)
7
TV Jack Panel
Tableau de connexions
du téléviseur
Panel de enchufes
del TV
Rear of Hi-fi System
Arrière de la chaîne haute fidélite
Parte posterior de equipo Hi-fi
SPDIF
Details refer to page 23.
/Détails, consultez le page 23.
/Para detalles, consulte la pag. 23.
AE: Audio to Hi-fi System
FR: Audio vers chaîne haute fidélité
ES: Audio al sistema Hi-fi
8
Audio
Details refer to page 23.
/Détails, consultez le page 23.
/Para detalles, consulte la pag. 23.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
C. The appliance has been exposed to rain; or
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
D. The appliance does not appear to operate normally or exhibits a
marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
17. Tilt/Stability- All televisions must comply with recommended
international global safety standards for tilt and stability properties
of its cabinet design.
7. Do not block any of the ventilation openings. Install in accordance
•
Do not compromise these design standards by applying exces
sive pull force to the front, or top, of the cabinet which could
ultimately overturn the product.
with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
•
Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product
damage and/or personal injury.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and third grounding prong.
The wide blade or third prong are provided for your safety. When the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from
the apparatus.
18. Wall or Ceiling Mounting- The appliance should be mounted to
a wall or ceiling only as recommended by the manufacturer.
19. Power Lines - An outdoor antenna should be located away from
power lines.
20. Outdoor Antenna Grounding- If an outside antenna is connected
to the receiver, be sure the antenna system is grounded so as to
provide some protection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-
1984, provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding connectors, location of
antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See Figure below.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
21. Object and Liquid Entry
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15. This product may contain lead and mercury. Disposal of these
materials may be regulated due to environmental considerations. For
disposal or recycling information, please contact your local authorities
- Care should be taken so that objects do not fall and
liquids are not spilled into the enclosure through openings.
a) Warning: To reduce the risk of fire or electric shock, this apparatus
should not be exposed to rain or moisture and objects filled with
liquids, such as vases, should not be placed on this apparatus.
22. Battery Usage CAUTION : To prevent battery leakage that
may result in bodily injury, property damage, or damage to the unit.
•
Install all batteries correctly, with + and - aligned as marked on the
unit.
16. Damage Requiring Service - The appliance should be serviced by
qualified service personnel when:
•
•
Do not mix batteries (old and new or carbon and alkaline, etc.).
Remove batteries when the unit is not used for a long time.
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
Note to the CATV system installer:This reminder is provided to call the CATV system installer's attention toArticle 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Example of Antenna Grounding
as per NEC - National Electric Code
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
A Guide to DigitalTV 2
Preparation 2
Use of the remote control 5
Control Buttons on theTV 6
My Content 6
Installation 7
Select the menu language
Store TV channels
Weak channel installation
Software upgrade
7
7
8
8
To use the menus 9
Introduction
How to navigate through the Settings menus
9
9
Demo 9
Setup menu 10
Preferences
Source
Clock
ꢀ0
ꢀ3
ꢀ3
ꢀ4
Convergence
TV menu 15
Picture menu
Sound menu
Features menu
Channels menu
ꢀ5
ꢀ6
ꢀ7
ꢀ8
Care of the screen
See Care and Cleaning, p. 29.
Connect Accessory Devices 21
Set-Top Box to TV
2ꢀ
2ꢀ
22
22
23
23
DVD Player/Recorder to TV
DVD Player/Recorder/VCR to TV
Video Camera/Games Console to TV
Audio to Hi-fi System (Digital)
Audio to Hi-fi System (Analog)
R End of life directives
Magnavox is paying a lot of attention to
produce environmentally-friendly products
in green focal areas.Your newTV contains
materials which can be recycled and reused.
At the end of its life specialized companies can
dismantle the discardedTV to concentrate the
reusable materials and to minimize the amount
of materials to be disposed off.
To select connected devices 23
Multimedia Browser 24
TroubleshootingTips 26
Glossary 28
Care and Cleaning 29
Specifications 30
Annex 1 - MagnavoxTV software upgrade with portable memory 31
Magnavox Limited Warranty 33
Please ensure you dispose off your oldTV
according to local regulations.
Recycling
The materials used in your set are either reusable or can be recycled.
To minimise environmental waste,specialist companies collect used
appliances and dismantle them after retrieving any materials that can
be used again (ask your dealer for further details).
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to DigitalTV
What is DigitalTelevision (DTV)?
Digital Television (DTV) is a relatively new type of broadcasting that promises to transform television viewing into a whole new
experience. Digital technology is used to capture images and sound to deliver a better picture quality. DTV technology is also
capable of multicasting and interactive capabilities.
There are many levels of digital television quality.The most common are:
Standard DefinitionTV (SDTV)
SDTV is the basic level of quality display and resolution for both analog and digital.Transmission of SDTV can be in the
traditional (4:3) or widescreen (ꢀ6:9) format.
Enhanced DefinitionTV (EDTV)
EDTV is better in picture quality than analog television.The formats for EDTV are 480p widescreen (ꢀ6:9) or traditional (4:3).
EDTV is in the middle range quality between SDTV and HDTV.
High DefinitionTV (HDTV)
HDTV has the highest quality for digital broadcast formats. Its resolution is widescreen format (ꢀ6:9). Combined with digitally
enhanced sound technology, HDTV sets new standards for sound and picture quality in television.
DTV is by far a more flexible and efficient technology than the analog broadcast system.Analog broadcasts can only provide
one program at a time. Digital television can broadcast a high definition program or more than one standard definition program
at the same time.
Preparation
Do not insert the power plug in a wall socket before all
connections are made
The major benefit of this projection television is its large viewing screen.To
see the large screen at its best, test various locations in the room to find
the optimal spot for viewing.
Be sure to allow a minimum of ꢀ5 cm of space around the TV.
To avoid cabinet warping, cabinet colour changes, and increased chance of
set failure, do not place the TV where temperatures can become excessively
hot – for example, in direct sunlight or near a heating appliance.
Magnetic fields, such as those of external speakers, may cause the picture
to distort if the speakers are placed too close to the television. Move the
magnetic field source away from the TV until there is no picture distortion.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
& Basic connections to theTV
Your integrated digital TV automatically decodes and displays the four basic DTV
picture resolution standards.
- SDTV (Standard Definition TV) are broadcast as 480i (480-line interlaced) or 480p
(480-line progressive scan) video.
- HDTV (High-Definition TV) are broadcast either in the ꢀ080i or 720p formats,
always with a widescreen picture.
CABLE
Note: Progressive scan video (p) is more like that you see in a movie theater. Images are
much more distinct and free of flicker, and motion is smoother.
Next to analog NTSC broadcast reception, your TV has an integrated High
Definition TV tuner which receives, decodes and displays terrestrial ATSC and
unscrambled cable (QAM) signals.
75
HDTV quality is only reproduced when a broadcaster or cable provider broadcasts
HDTV signals.
Note:Ask your broadcaster or cable box provider to transmit/enable HD content to your
home, and possibly upgrade to a CableCard for the decription of HD signals.
There are 2 ways to get HDTV content:
- via cable,
- via antenna.
Note:This drawing is used wherever you can connect cable or antenna.
CABLE
75
CableTV
Connect the cable TV signal to the CABlE/ANTENNA 75 Ω jack at the bottom of
the TV. See page 8 for details on using "Autoprogram" to store channels in the TV’s
memory.
TO TV
OUTPUT
OUT
2
IN
3
Note: this connection will supply stereo sound to theTV if it is being broadcast by the
station you are watching.
Set-Top Box
Cable box with Rf In/oUT
• Connect the incoming cable TV signal to the cable In jack 1 on the back of
the cable box.
• Connect a coaxial cable (not supplied) from the To TV jack on the back of the
cable box to the CABlE/ANTENNA 75 Ω x jack 2 at the bottom of the TV.
Note:Your cable box may have a different label for the To TV jack, such as
oUTPUT or oUT.
• Set the oUTPUT CH switch 3 of the cable box to CH 3 or 4 (whichever is
correct for your cable box), then tune the TV to the corresponding channel.
Once tuned, change channels at the cable box, not the TV.
CABLE
Note:This connection will not supply stereo sound to theTV.The reason is that the RF
output on a cable box - labeled To TV, oUT or oUTPUT for example - will not
send a stereo signal to the tuner (VHF/UHF) input on aTV.
AV1 :
L + R + VIDEO
1
4
2
SIGNAL
SPLITTER
Cable box with A/V outputs
3
• Connect the incoming cable TV signal 1 to a signal splitter (not supplied).The
signal splitter enables you to avoid having to use the TOTV jack on the back of
the cable box.This jack will not supply stereo sound to the TV.
Note:Your cable box may have a different label for theTo TV jack, such as
oUTPUT or oUT.
OUT
IN
Set-Top Box
• Connect a coaxial cable (not supplied) to a connector on the signal splitter and
to the CABlE/ANTENNA 75 Ω x jack 2 on the TV.
Watching CableTV programs that don’t
require the cable box
• Connect another coaxial cable (not supplied) to a connector on the signal
splitter and to the cable In jack 3 on the back of the cable box.
• Connect A/V cables (not supplied) to the VIDEo and AUDIo L and R
outputs on the back of the cable box and to the AV2 video (labeled VIDEo)
and AUDIo (labeled L and R) jacks 4 on the back of the TV.
• To view programs from your cable box, first press the AV button on the
remote control.
• Press the cursor down or up buttons until the AV2 signal source is selected.
• Press the oK button to confirm your selection.The AV2 input source
becomes current for the viewing of cable TV programs through your cable box.
Since you’ve connected the cable TV signal
directly to the TV’s tuner, you can also watch the
unscrambled programs by simply tuning to the
desired channel.You must first use Autoprogram,
however, to store channels in the TV’s memory.
See page 8.
Note:This connection will supply stereo sound to the
TV if it is being broadcast by the station you are
watching.
Note: If your cable box Audio/Video outputs will not supply video and stereo audio to
theTV, you will need to make the connection shown above in the example “Cable box
with Rf In/oUT”.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable box with S-Video, component video (YPbPr) or HDMI connectors
See Connect Accessory Devices, p. 2ꢀ-22.
Antenna
Via antenna you can watch whatever DTV programs being broadcast in your area
for free.
CABLE
If you’re not sure what HDTV programming is available in your area, contact your
local content provider or your local electronics store retailer.
Broadcasters are in the middle of a transition from analog to digital TV.This means
that a given broadcaster will have two channels on the air, one analog and one
digital.
75
Connect the incoming antenna signal to the CABlE/ANTENNA 75 Ω
x jack at the bottom of the TV. See page 8 for details on using Autoprogram to
store channels in the TV’s memory.
Note:This connection will supply stereo sound to theTV if it is being broadcast by the
station you are watching.
Direct Broadcast Satellite (DBS)
Satellite systems offer many of the same premium channels as cable systems, and
often at a lower price.To get these channels, you’ll need to install a small dish
antenna outside.
There are 2 main DBS systems: DirecTV & DishNetwork.These systems require
separate, proprietary set top receiver boxes to decode their signals and send them
to your digital TV set.These boxes may include a digital TV tuner for off-air DTV
broadcasts.
Satellite broadcasters also provide major local channels, depending on the market
in which you live.
DBS also provides service in areas not covered by cable because they are in rural
areas or other areas not passed by a cable line.
DBS also allows you to watch pay-per-view events.
é Before installing your TV or before hanging it on the wall, connect all your
accessory devices. See p. 20.
“ Refer to the bottom of the set for the correct operation voltage. Insert the power
cord in the wall socket.
Consult your local dealer if your mains supply is different.To prevent damaging the
mains (AC) cord which could cause a fire or electric shock, do not place the TV
on the cord.
‘ Remote control:
Insert the 2 batteries supplied (Type R6-ꢀ,5V). Be sure the (+) and (-) ends of the
batteries line up correctly (inside of case is marked.)
The batteries supplied do not contain the heavy metals mercury and cadmium. Please
check on how to dispose of exhausted batteries according to local regulations.
( Turn the TV on:
Press the power switch . at the front of the TV.You may also press CH+/- or
PoWER button on the remote control.
An indicator on the front of the TV lights up.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Use of the remote control
Note: For most buttons pressing a button once will activate the function. Pressing a second time will de-activate it.
When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list.The list will be removed automatically
after 6 seconds or press OK to remove immediately.
FORMAT
Press this button to display a list of
available display formats (depending on
the receiving signal).This lets you choose
the display format of your preference.
Press this button repeatedly to select
another picture format:Automatic, Super
Zoom, 4:3, Movie expand 14:9, Movie
expand 16:9, 16:9 subtitle,Wide screen.
POWER button
Press to turn on/off the TV from or to
standby mode.
The power is never turn off completely unless
it is physically unplugged.
AV button
Press this button repeatedly to select
AV1,AV2,AV3, HDMI, SIDE or TV
when in TV mode, according to where you
connected the accessory devices
(p. 21).
and button
Multimedia browser functional buttons
(p.25).
DEMO button
Demo menu on/off. See p.9.
CLOCK button
On/off and Time display (for max. 10
minutes)
Automatic makes the picture fill the
screen as much as possible.
Super zoom removes the black bars on
the sides of 4:3 programs with minimal
distortion.
When in Movie expand 14:9, Movie
expand 16:9 or Super zoom picture
format, you can make subtitles visible with
the cursor up/down.
Color buttons
When functions attached to the color
buttons, the color buttons are shown on
screen.
MY CONTENT button
"My Content" menu on/off, see p. 6.
Note:With HD sources not all screen formats
will be available.
MENU button
Settings menu on/off, see p. 9.
*INFO
Cursor buttons
Display information: Press to display
(when available) information about the
selected TV channel and program or
accessory device.
Press the cursor buttons up/down, left/
right to navigate through the menus.
VOL +/– button
Press + or - to adjust the volume.
OK - to activate a setting
- to display the list of channels stored
(according to the selection made in
the Installation mode (Antenna or
Cable), p. 7.
NUMERIC (0-9) buttons
To select TV channels or enter values in
the on-screen menu. For single channel
entries, press the numbered button for the
channel you desire. The TV will pause for
a second or two before changing to the
chosen channel.
CH +/– Channel selection button
- To browse through the TV channels or
sources stored in the preferred channel
list (see p. 20).
- To select between Antenna or Cable TV
channels, first make your selection in the
Settings menu, see, p. 7.
DOT button
*The quality and accuracy of the
information on the information
banner are transmitted from broad-
casters. You may see a difference in
broadcast time if the broadcaster is
from a different time zone area.
To enter values for minor channels e.g.
36.4
Note:You don’t have to start the installation
again once you have searched for and stored
the availableTV channels.
A/CH
Press to alternate between the currently
viewed channel and the previously viewed
channel.
MUTE button
Interrupt the sound or restore it.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Buttons on theTV
Should your remote be lost or broken you can still change some of the basic
settings with the buttons on your TV.
Press the power switch . to switch the TV on.
Press:
• the +VoLUME - button to adjust the volume;
• the + CHAnnEL - buttons to select the TV channels or sources.
The MEnU button can be used to summon the Settings menu without the
remote control.
Use:
•
the +VoLUME - buttons to select left/right menu items and the + CHAnnEL -
buttons to select up/down menu items;
• the MEnU button to confirm your selection.
My Content
The My Content menu (and the underlying Multimedia browser) is intended to
contain all content, services, applications you are interested to consume.
Television
Multimedia
TV Channels
USBDevice
& Press the MY ConTEnT button to activate.
é Press the cursor up/down to move the highlight up and down in the list of
menu items.
“ Press the cursor right to go deeper into the structure.
• Television:
TV channels leading to the list of TV channels; the left panel will contain
the analog channel numbers, the one-part channel numbers and the major
channel numbers in case of two-part digital channels.The right panel will
contain the available subchannels associated with the major channel that is
currently highlighted on the left panel. If there are no subchannels associated
with the currently selected channel in the left panel, the right panel will
remain empty.
• Multimedia
Contains the locally connected devices on which content (pictures, audio
files) is stored. See Multimedia browser, p. 25.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Select the menu language
Settings
Installation
Language
4
Language
English
3
& Press the MEnU button on the remote control.
é Use the cursor down button to select Installation in the Settings menu.
“ Use the cursor right button to enter the Installation menu.
Francais
Autoprogram
Weak channel installation
Software upgrade
Espanol
‘ Select Language and enter the list of available languages with the cursor
right button.
( Select your language with the cursor up/down buttons and press oK to
confirm your selection.
§ Proceed with the Installation menu.
Press the cursor right to select your menu language.
Store theTV channels
Television installation
& Select Autoprogram in the Installation menu.
é Use the cursor right button to enter the Autoprogram menu.
“ Press the oK.
Installation mode
Antenna
Please select your
installation mode.
Cable
‘ Select Cable or Antenna in the Installation mode.
When Antenna is selected, the TV will detect antenna signals and will
search for antenna TV (NTSC and ATSC) channels available in your local
area.
When Cable is selected, the TV will detect cable company supplied signals
and will search for cable TV (NTSC,ATSC, QAM modulated) channels
available in your area.
Previous
Next
Make sure you complete registration with your cable TV provider and
connection of equipment.
Television installation
( Press the green button “next” on the remote control.
Note:All channels must be unlocked in order to autoprogram. If requested, enter
your PIN code to unlock all channels. See section on Menu preferences under
Settings,TV menu.
You can now start automatic installation.This procedure
can take more than half an hour.
§ Press the green button “Start” to start autoprogramming.
The menu screen disappears and the progress of autoprogramming is
displayed.The progress bar indicates the number of analog and digital TV
channels found.
When Autoprogramming is complete, a message appears confirming the
completion. Press the red button "Finish" and the screen returns to the
Installation menu.
Previous
Start
Tips:
•When you have lockedTV channels while initiating autoprogram, a message appears asking to enter your PIN code in order to complete autoprogramming.
•When interrupted, the updated channel information is retained as well as the old channel information that were not updated.
• Background autoprogramming occurs only when theTV is turned on.
• Channel information of an ATSC channel is updated only for the ATSC channel currently tuned.
• If an NTSC channel is tuned, then in Background Autoprogramming theTV will scan all the possible ATSC frequencies and update information.
•Weak channel installation :This allows you to manually tune weak ATSC channels in order to adjust the antenna and thus optimize signal quality for that
channel. (See Installation menu,Weak channel installation, p. 9.)
• Once you have searched for the available Antenna as well as the CableTV channels, they are stored in the memory.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel tuning
Available channels:
- Cable (analog NTSC or digital QAM): max. from ꢀ to ꢀ35
- Antenna (analog NTSC or digital ATSC): max. from 2 to 69
If a tuned channel is not yet in the master channel map, the TV will attempt
to tune the channel and it will be added to the map.
If the channel is not acquired, a message will appear that the channel is not
available.
Digital Channel selection delay
Due to the tuning complexity of subchannel digital
programming, the time to select and view a digital
channel may take slightly longer than what the viewer
is normally accustomed to (as compared to analog
channel programs).
Digital channel broadcasts contain program and
system data information that must be processed
before the channel selection can be displayed.
When you tune an audio-only digital subchannel, a display appears with the
message Audio only.
Subchannel selections
The new standards employed with digital broadcasting make it possible to receive
multiple program channels under a single major channel number which can be
selected by pressing the digit remote control direct-access channel number entry.
Television installation
Channel search completed.
Tip:
Digital channels found :
Analog channels found :
0
3
After the installation of theTV channels has been done, always make a selection
in the Installation menu between Antenna or Cable whether you want to watch
AntennaTV channels or CableTV channels.
If you make use of a signal splitter do not forget to put the switch in the
corresponding position.
Finish
Weak channel installation
Settings
4
Installation
Language
Weak channel installation
This enables you to do a weak ATSC digital channel installation.This is only
available for TV channels installed via an antenna connection (see section on
Preparation, under Antenna).
2
3
Autoprogram
Weak channel installation
Software upgrade
4
5
6
7
8
9
& If a certain channel you expect to see is not tuned or is weak, you can install
it manually. Call your local broadcasting station to check what channel is
being transmitted to.
é
Select that channel in the displayed list of TV channels (in the antenna mode).
“ The signal strength is displayed and updated continuously as you rotate the
antenna.
This allows you to maximize the signal quality of weak channels by manually
rotating the antenna.
Software upgrade
Settings
This menu allows you to upgrade your TV software using a USB device.
Installation
Language
4
Software upgrade
2
Current software info
Local upgrades/app...
Autoprogram
USB upgrade
Weak channel installation
Software upgrade
It is possible to initiate an upgrade procedure from a USB portable memory.
The memory device must be stored with the appropriate upgrade image
website.
How to upload a new software version on your portable memory device, see
Annex ꢀ, under Magnavox TV software upgrade with portable memory.
This allows you to upgrade newTV software if available.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the menus
Introduction
A lot of guiding instructions, help texts and messages will be displayed on your TV when using the menus or when trying to execute an action.
Please, follow the instructions and read the help text which are being displayed on the specific item highlighted.
The color buttons refer to different actions which may be executed depending on the activated device. Press the corresponding color button
on the remote control to perform the required action.
How to navigate through the Settings menus
The Settings menu allows you to access and change settings and preferences.
Settings
TV
5
TV
4
Picture
Sound
Setup
&
Press the MEnU button on the remote control to call up the Settings
Installation
Features
Channels
menu.
Demo
Exit
- On the left panel the highlight can be set on a menu item with the cursor
up/down button.
The right panel shows the content of the highlighted menu item in the left
panel.
Note: Sometimes not all the menu items are visible on the screen.The numbers
at the top of the menus indicate the number of items on the menu. Use the
cursor down button to reveal all items.
This gives you an overview of the menus you can select.
- Use the cursor right button to enter the right panel.
The contents of the right panel are displayed on the left panel and the
right panel shows the contents of the newly highlighted items in the left
panel.
Note: In some cases it is important that the picture can be viewed while
adjusting the settings.This means when the highlight bar is on the right panel,
the other menu items are hidden. When the cursor left key is pressed again,
the hidden menu items re-appear and the highlight bar is displayed on the left
panel.
Settings
TV
4
Picture
13
Auto picture
Contrast
Picture
Sound
Features
Brightness
é
Press the cursor left button to go one menu level up again.
- Press the oK button on the highlighted item to activate and to exit the
menu.
Color
Channels
Sharpness
- Press the MEnU button again to exit the Settings menu.
Note:You can exit the menu by pressing one of the color buttons (if present)
referring to certain actions which may be executed.
Color temperature
Digital processing
Dynamic contrast
The picture menu contains the settings that affect the quality of the picture.
Demo
The Demo menu gives you an idea of the features that come with the
television set.
&
Select Demo in the Settings menu or press the DEMO button. Press the
cursor right button to enter Demo mode.
Settings
TV
5
Demo
2
Pixel Plus
Active Control
é
“
Highlight a desired demo with the cursor up/down buttons.
Setup
Press oK button to start playing the highlighted demo.
Installation
Demo
Exit
Press the green button to automatically run all demos in sequence.
Press the red button to stop the auto run function.
Press the red button again to exit the demo and to return to TV mode.
Note:The selected demo is played continuously until you press the DEMO button.
This menu demonstratesTV feature.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup menu
This menu is used to control the settings of special TV functions, features and
accessory devices.
Settings
Settings
TV
5
Setup
4
The Preferences menu allows you to change settings that will be accessed
only occasionally.
Preferences
Source
Setup
The Source menu allows you to select a source.
Installation
Clock
The Clock menu allows you to use your TV as a clock.This setup is
necessary for the correct working of the lock after feature.
Convergence
Demo
Exit
This menu is used to control settings of specialTVfunctions, features and
accessory devices.
Preferences
& Press the MEnU button.
Settings
Setup
4
Preferences
4
é Select Setup with the cursor down button and press the cursor right
Picture/sound prefe...
Features preferences
Preferences
button to select the Preferences menu.
Source
Clock
“ Press the cursor right button again to select Picture/sound preferences.
Menu preferences
Reset AV settings
‘ Press the cursor right button again to enter the Picture/sound
Convergence
preferences menu.
This contains items that can set or adjust various specialTV functions.
Picture/sound preferences
Settings | Setup
Preferences
4
Picture/sound prefere... 1
Auto surround
Auto surround
Sometimes the broadcaster may transmit special signals for Surround
sound encoded programs.The TV automatically switches to the best
surround sound mode when Auto surround is turned on.
Picture/sound prefere...
Features preferences
Menu preferences
Reset AV settings
This menu allows you to setup or to select some picture and sound related
setting preferences.
features preferences
Settings | Setup
Caption service
This allows you to select the closed caption service levels of analog
broadcasting to be displayed.
Preferences
4
Features preferences
Caption service
3
Picture/sound prefere...
Features preferences
Menu preferences
Digital caption service
Digital caption options
Closed captioning allows you to read the voice content of television
programs on the TV screen. Designed to help the hearing impaired, this
feature uses on-screen ‘text boxes’ to show dialogue and conversations
while the TV program is in progress. Captions will appear on the screen
during captioned broadcasts.
Reset AV settings
The captions are not necessarily always correct in spelling and grammar. Not
allTV programs and product commercials are made for broadcast with Closed
Caption information included. Refer to your area’sTV program listings for theTV
channels and schedule of Closed Caption shows.The captioned programs are
usually noted in theTV listings with service marks such as ‘CC’.
This menu allows you to setup or to select some feature related setting
preferences.
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
& Select Caption service.
é Press the cursor right button.
“ Select the desired Caption service:
Settings | Setup | Preferences
• CC-1, CC-2, CC-3, CC-4
Dialogue (and descriptions) for the action on the captioned TV program
shows on screen.
Usually CC 1 is the most frequently used. CC 2 may be used for alternate
languages if they are being transmitted.
Features preferences
Caption service
3
Caption service
8
CC-1
CC-2
CC-3
CC-4
T-1
Digital caption service
Digital caption options
• T-1,T-2,T-3 orT-4
Often used for channel guide, schedules, bulletin board information for
Closed captioned programs, news, weather information or stock market
reports.
T-2
Not all Captioned services are necessarily being used by a TV channel during
the transmission of a closed caption program.
T-3
T-4
Note:This television provides display of television closed captioning conforming with
the EIA-608 standard and in accordance with Sections 15.119 of the FCC rules.
You can choose the Closed captions service level to be displayed.
Digital caption service
This allows you to configure the way you choose to view the digital captioning.
Select one of the digital service channels made available by the caption provider.
There are 6 standard services. Service ꢀ is designated as the Primary Caption
Service.This service contains the verbatim, or near-verbatim captions for the
primary language being spoken in the accompanying program audio.
Service 2 is designated as the Secondary language Service.This service contains
captions in a secondary language which are translations of the captions in the
primary Caption Service.The other service subchannels are not pre-assigned. It
is up to the discretion of the individual caption provider to utilize the remaining
service channels.
Settings | Setup | Preferences
Features preferences
3
Digital caption service
6
CS-1
CS-2
CS-3
CS-4
CS-5
CS-6
Caption service
Digital caption service
Digital caption options
Digital caption options
This allows you to modify how digital captions are displayed on your TV.
Select from the following options to change the visual characteristics of your
TV’s digital captioning.
This allows you to select one of the digital service channels made available
by the individual caption provider.
•
Reset to default
Select this option to reset the digital caption options back to the captions
provider default settings.
Press oK to confirm.
Size
Settings | Setup | Preferences
•
Features preferences
3
Digital caption options
5
Select this option to choose the size of of caption display according to your
own preference.
Select Default (Automatic), Small, Standard or Large and press oK
to confirm.
Reset to default
Size
Caption service
Digital caption service
Digital caption options
Style
Text
•
•
•
Style
Select this option to select the font style of caption display according to
your own preference. Select from Default, Monospaced serif, Serif,
Monospaced sans serif, Sans serif, Casual, Cursive or Small caps...
Text
Background
Select this option to choose the text color or the opacity of the text box
of caption display according to your own preference.
Select a color and one of the opacity options.
Background
These options allow you to select a variety of character font representations,
text color and sizes and other attributes.
Select this option to choose the character background color or one of
the background opacity options of caption display according to your own
preference.
Settings
TV
4
Features
2
Select a color and one of the opacity options.
Closed captions
Sleeptimer
TV
Picture
Sound
To display the transmitted CC-CS-text on the screen according to your chosen
CC or CS service, use the Closed captions option in the Feature menu.This
text can either be permanently displayed (assuming that the service is available
in the broadcast) or only when mute is active.
Features
Settings |TV
Channels
Features
2
Closed captions
3
Closed captions
Off
On
Sleeptimer
& Select features in the TV Settings menu.
On during mute
The features m
é Press the cursor right to enter the features menu.
“ Select the menu items with the cursor up/down and adjust the settings with the
cursor left/right.
‘ Press the cursor right after having selected Closed captions.
This displays the transmitted CC-text on theTV screen according to
your chosen CC service.This text can either be permanently displayed,
or only when mut is active.
( Select on, off or on during mute.
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu preferences
Settings | Setup
on Screen display
Preferences
4
Menu preferences
OSD
3
& Select oSD.
Picture/sound prefere...
Features preferences
é Press the cursor right button to select normal or Minimum.
normal to activate the continuous display of the channel number (for max.
ꢀ0 minutes) and extended display of TV channel and program information
on screen. E.g. information on the main or auxiliary program, input signal
quality of connected accessory devices, the display format, sound mode,
availability of Closed Caption service, the audio language, the rating,
sleeptimer setup.
Show emergency al...
Change PIN
Menu preferences
Reset AV settings
Settings | Setup | Preferences
Preferences
3
OSD
2
Normal
OSD
Minimum to activate the display of reduced channel information.
Note:When Closed Captions is turned on, continuous display of the channel
number and clock is not possible.
Minimum
Show emergency alerts
Tprheisfemreenncuesa.llowChangePIN
Show emergency alerts (EAS)
This allows you to select the alert priority level of the information
disseminated by the cable operator.The standard SCTEꢀ8 defines an
Emergency Alert signalling method for use by cable TV systems to signal
emergencies to digital devices such as digital set-top boxes, digital TVs and
digitalVCRs.
You can select the display of the volume bar and a reduced or an
extended on screen display of program and channel information.
The Emergency alert signalling scheme defined in the standard allows a
cable operator to disseminate emergency alert information related to state
and local-level emergencies and warnings in a cost-effective and efficient way,
while minimizing disruption of programming.
An Emergency alert message will have one of the following priorities:
Low, Medium, High or Maximum.
Settings | Setup | Preferences
Menu preferences
OSD
3
Show emergency al...
Always
3
Skip low priority
Show emergency alerts
Change PIN
Skip medium/low pri...
The Emergency alert message with priority High or Maximum will always
be presented. Low or Medium will be present or ignored depending on
the selected setting.
Caution! When theTV clock is undefined (See section on Clock), the Emergency
Alerts will be ignored.
You can select the display of the volume bar and a reduced or an
extended on screen display of program and channel information.
The Emergency Alert message display will contain following information:
- The Emergency Alert text
- The start time + date
Tips:
Emergency Alert Signalling is not possible:
- when content browsing;
- with analogue video sources.
- The end time + date.
& Select Show Emergency Alerts in the Menu preferences menu.
é Press the cursor right button and select one of the Emergency alerts
options:
- You always have the possibility to remove the message from the
screen.
- The message display will overlap whatever menu element or other
message is on the screen.
- Always, when you always want the Emergency alert messages to be
displayed when available;
- Skip low priority, when you want the messages with low level to be
ignored;
- Skip low/medium priority, when you only want the messages with high
priority to be displayed.
Caution! If you have forgotten your PIn!
& Select Change PIn in the Menu preferences menu and
press the cursor right.
Set/Change PIn
& Select Set or Change PIn with the cursor down button.
é Press the cursor right to enter the overriding PIN code
0-7-1-1.
é If no PIN-code exists, the menu item is set to Set PIn. Follow the
instructions on screen.
“ Press the cursor again and enter a new personal 4-digit
PIN code.The previous code is erased and the new PIN-
code is stored.
If a PIN-code has previously been entered, the menu item is set to Change
PIn.Follow the instructions on screen.
All number combinations from 0000 to 9999 are valid numbers.
Settings | Setup
“ The Menu preferences menu reappears with a message confirming that
Preferences
4
Reset AV settings
Start now
the PIN has been created.
Picture/sound prefere...
Features preferences
Menu preferences
Reset AV settings
Reset AV settings
This function allows you to reset most of the picture and sound settings to
their predefined factory states.
& Select Reset AV settings with the cursor down button.
é Press the cursor right button.
This resets the picture and sound settings to their predeꢀned factory
values, but maintains the channel installation settings.
“ Press oK button to erase settings and reset them to their default values.
ꢀ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Source
Settings
This menu allows you to identify the accessory devices you have connected to the
external input/output.
Setup
4
Source
AV 1
6
Preferences
Source
& Select Source in the Setup menu.
AV 2
é Press the cursor right button to enter the list of types of devices connected to the
AV 3
Clock
selected input.
HDMI
Convergence
“ Select the accessory device with the cursor up/down buttons.
Side
Analog Audio In
When you select AV1, AV2, AV3, HDMI, Side or Analog Audio In, a list appears
allowing you to identify which type of accessory device is attached to this input.The
TV detects the presence of the connected device and the signal is routed accordingly.
Once you have selected the source type, e.g. DVD, this source will automatically be
selected when your remote control is in DVD mode, (see section on Use of the
remote control), and when you press the AV button on the remote control.
Settings | Setup
Source
AV 1
6
AV 1
DVD
SAT
8
AV 2
Game
Digital STB
PVR
AV 3
The TV can output Digital audio via the DIGITAl AUDIO OUT(SPDIf oUT)
connector to an external amplifier or receiver.
If your amplifier or receiver has a matching connector for Digital Audio In, you can
connect it with a single cable to the TV’s DIGITAl AUDIO OUT(SPDIf oUT).
See section on Digital Surround Receiver.
HDMI
Side
HD
Analog Audio In
Cable
Other
Clock
This allows you to use your TV as a clock.
- Adjusting the clock is necessary for the correct working of Lock after features.
(See section onTV settings, under Channels menu)
- Closed captioning will not be displayed when the clock is being displayed. Press the clock
button again to switch off the clock if you want to see closed caption.
Settings
Setup
4
Clock
6
Auto clock mide
Auto clock channel
Preferences
Source
Auto clock mode
& Select Clock in the Setup menu.
Time
Clock
é Press the cursor right button to select the Auto clock mode.
Day
Convergence
“ Press the cursor right button to instruct the TV to get the time automatically or
Time zone
Daylight saving
manually.
Auto clock channel (only available when Auto clock mode is set to Automatic)
With the cursor buttons, select the channel number where time can be found by the
TV.Typically time can be found on PBS as well as some other channels.
Note: If Manual has been selected in the Auto clock mode, the Auto clock channel menu
item can not be selected.
Time - Day (only available when Auto clock mode is set to Manual)
With the cursor buttons, select and enter the correct time and day.
If Auto clock mode Manual has been selected, and no clock search has been done,
the system will retain the entered time and day.
Time zone (only available when Auto clock mode is set to Automatic)
This function allows you to select your local time zone. Broadcast time information
will auto correct the clock display for your local time.
Most of theTV channels do not transmit clock
information.There are a few cable channels who do
but they are at the end of the channel ring.There is
no clock transmission in antenna channels. In such
cases, either clock extraction takes a long time, or
there is no clock.
& Select Time zone with the cursor down button.
é Press the cursor right button to select your local time zone.
Daylight saving (only available when Auto clock mode is set to Automatic)
Daylight saving time is automatically set by specially broadcast signals.This menu item
allows you to disable the automatic setting of daylight saving time.This is useful if you
live in an area or state where daylight saving is not applied, but you receive channels
from other areas where daylight saving signals are broadcast.
& Select Daylight saving with the cursor down button.
é Press the cursor right button to select Automatic for automatic clock correction
for daylight saving time, based on specially broadcast signals.
“ Select off to disable automatic clock correction based on the specially broadcast
signals.
ꢀ3
Download from Www.Somanuals.com. All Manuals Search And Download.
Convergence
Settings
Manual Convergence: Converge Red/Blue
Setup
4
Convergence
Manual convergence
Preferences
Source
You can use the Manual Converge controls to make convergence
adjustments to suit your personal preferences or to further fine-tune the
picture.
Clock
Convergence
& Select MAnUAL ConVERGE in the SETUP menu.
Settings | Setup
Convergence
Manual convergence
Convergence red
7
é Press the cursor right button to enter into the manual convergence menu.
Manual convergence
Convergence blue
Multipoint red
“ Press the cursor down button and select either ConVERGE RED or
ConVERGE BLUE and press the cursor right button.
Multipoint blue
nt
‘ Press oK button to start the manual convergence.
Settings | Setup
ltipoint
Manual convergence
Manual convergence
Convergence red
7
Tip: If various images in the picture have red outlines, select
ConVERGE RED. If various images in the picture have blue outlines, select
ConVERGE BLUE.
ry
Convergence blue
Multipoint red
Start now
Multipoint blue
( Use the cursor right, left, up or down button to adjust the cross hair until
the colour outline is gone.The adjustment is automatically saved in the TV’s
memory when you exit the adjust mode.
Save multipoint
Save undo multipoint
Restore factory
§ Press the MEnU button to return or the Info key to switch the menu
off.
Tip:Allow theTV to warm up for 20 minutes before adjusting
convergence.Adjust Converge Red or Converge Blue before using
the Multipoint Red/Blue controls.
Check the TV picture. If any colour outlines remain around the images, use
the MULTIPoInT RED (for red outlines) or MULTIPoInT BLUE
(for blue outlines) control. See the next section for instructions for using
those controls.
Settings | Setup | Convergence
Manual convergence
Convergence red
Convergence blue
Multipoint red
7
Multipoint red
Start now
Using Manual Converge: Multipoint Red/Blue
The Multipoint Red/Blue convergence controls allow you to adjust picture
convergence at specific points on the TV screen.
Multipoint red
Save multipoint
Save undo multipoint
Restore factory
& Select MULTIPoInT RED or MULTIPoInT BLUE in the
MAnUAL ConVERGE menu.
é Press the cursor right to enter navigate mode.
“ Use the cursor left, right, up or down button to move to a cross hair that
has a colour outline.
‘ Press the Info button to enter adjust mode.
( Use the cursor left, right, up or down to adjust the cross hair until the
colour outline is gone.
Settings | Setup | Convergence
Settings | Setup | Convergence
Manual convergence
Convergence red
7
Save multipoint
Start now
Manual convergence
Convergence red
7
Save multipoint
Stored
§ Press the Info button to return to navigate mode.
Convergence blue
Multipoint red
Convergence blue
Multipoint red
è Repeat steps 3-6 until all misaligned cross hairs have been adjusted.Then
Multipoint blue
Save multipoint
Save undo multipoint
Restore factory
Multipoint blue
Save multipoint
Save undo multipoint
Restore factory
press the MEnU button.
! For your multipoint adjustments to be stored in the TV’s memory, you must
activate SAVE UnDo MULTIPoInT.
Settings | Setup | Convergence
Settings | Setup | Convergence
Manual convergence
Convergence red
7
Save undo multipoint
Start now
Manual convergence
Convergence red
7
Save undo multipoint
Saved
Note: If you are not satisfied with the adjustments you just made and want to
start over, you can use the UnDo MULTIPoInT control.This control allows
you to undo the adjustments, but only if you use it before saving.
Convergence blue
Multipoint red
Convergence blue
Multipoint red
Multipoint blue
Save multpoint
Multipoint blue
Save multpoint
Save undo multipoint
Restore factory
Save undo multipoint
Restore factory
To save your multipoint adjustments: Select SAVE MULTIPoInT and press
the cursor right or OK button.
To undo your multipoint adjustments: Select SAVE UnDo MULTIPoInT
and press the cursor right or OK button.
Settings | Setup | Convergence
Settings | Setup | Convergence
Manual convergence
Convergence red
7
Restore factory
Start now
Manual convergence
Convergence red
7
Restore factory
Restored
Convergence blue
Multipoint red
Convergence blue
Multipoint red
To restore theTV’s picture convergence to factory settings, select RESToRE
fACToRY and press the cursor right or OK button.
Multipoint blue
Save multpoint
Multipoint blue
Save multpoint
Save undo multipoint
Restore factory
Save undo multipoint
Restore factory
ç Press the MEnU button to return or the Info button to switch the
menu off.
ꢀ4
Download from Www.Somanuals.com. All Manuals Search And Download.
TV menu
Press the MEnU button on the remote control to display the Settings menu.The
TV menu gives you an overview of the menus you can select.
Note: Depending on the input signal, one or more menu items may not be selectable.
Picture menu
Note: Some menu items are not available in case of HD sources.
Settings
TV
5
TV
4
Picture
Sound
& Press the cursor right button to select Picture.
Setup
Installation
Features
Channels
é Press the cursor right button again to enter the Picture menu.
“ Select the menu items with the cursor up/down buttons.
Demo
Exit
‘ Adjust the settings with the cursor left/right buttons or enter the list of
submenu items with the cursor right button. Select a submenu item with the
cursor up/down buttons.
Auto picture
This gives you an overview of the menus you can select.
Select Auto picture to display a list of predefined picture settings, each
corresponding with specific factory settings.
Personal refers to the personal preference settings of picture in the picture
menu.
Note:This MagnavoxTV has been set at the factory to look best in bright store
environments which typically use fluorescent lighting.As your home will likely not be
as well lit as a store, we recommend that you cycle through the various auto picture
modes to find the one that best suits your own viewing conditions. Most consumers
will find that natural is the correct choice.
Settings
TV
4
Picture
13
Auto picture
Contrast
Picture
Sound
Features
Contrast
Brightness
This will adjust the intensity of bright areas of the picture but keep the dark
areas unchanged.
Color
Channels
Sharpness
Color temperature
Digital processing
Dynamic contrast
Brightness
This will adjust the light output of the complete picture, which will mainly affect
the darker areas of the picture.
The picture menu contains the settings that affect the quality of the picture.
Color
This will adjust the saturation level of the colors to suit your personal
preference.
Sharpness
This will adjust the sharpness of fine details in the picture.
Color temperature
This will increase or decrease Warm (red) and Cool (blue) colors to suit
personal preferences.
Select Cool to give the white colors a blue tint, normal to make the white
colors neutral, Warm to give the white colors a red tint.
Digital processing
• Standard = line doubling eliminates the flicker.
• Pixel Plus = for everyday viewing, Pixel Plus is the most ideal setting, as it
fully processes the image to enhance every single pixel, improving contrast,
sharpness, picture depth, and color reproduction and brilliance from every
source, including High Definition.
Standard mode is recommended only for very noisy or poorly mastered
sources or for those who find the smoothness of Pixel Plus (which eliminates
judder in the picture) unsettling.
Dynamic contrast
Automatically makes the contrast in the darker and the brighter picture areas
more noticeable as the image on the screen changes.
Normally you would select Maximum.Or you may be prefer to select
Minimum or off.
& Press the cursor right button to enter the list.
é Select one of the settings with the cursor up/down buttons.
“ Press the cursor left to return to the picture menu.
ꢀ5
Download from Www.Somanuals.com. All Manuals Search And Download.
DnR (Digital Noise Reduction)
Settings |TV
Automatically filters out and reduces the image noise and improves picture
quality when receiving weak video signals.
Picture
13 DNR
4
& Press the cursor right button to enter the list.
Off
Brightness
Color
50
67
4
Minimum
é Select off, Minimum, Medium or Maximum according to the image
noise.
Sharpness
Medium
Maximum
“ Press the cursor left button to return to the picture menu.
Color temperature
Digital processing
Dynamic contrast
DNR
Color enhancement
When activated, this feature automatically controls green enhancement and
blue stretch. It makes the colors more vivid.
Color enhancement
This sets the level at which noise is measured and reduced in the picture.
& Press the cursor right button.
é Select on or off in order to activate/de-activate Color enhancement with
the cursor right button.
Tint
Allows you to select the color mix (hue) of the picture.
Picture format
This menu item performs the same as the foRMAT button on the remote
control. See section on Use of the remote control.
Settings |TV
Active Control
Picture
13
Active Control
Off
4
The TV continuously measures and corrects all incoming signals in order to
provide the best picture possible.
Color temperature
Digital processing
Dynamic contrast
Minimum
& Select Active Control.
Medium
é Press the cursor right button to enter the list of Active Control values.
Maximum
DNR
“ Press the cursor right button repeatedly to select the Active Control values
off, Minimum, Medium or Maximum.
Color enhancement
Tint
0
The picture settings are being optimized continuously.These menu items
cannot be selected.
Picture format
Active control
‘ Press oK button or wait for timeout to exit the Active Control display.
With Active Control theTV continuously measures and corrects all
incoming signals in order to provide the best picture possible. Select the
Active Control level.
Sound menu
& Select Sound in the TV Settings menu.
Settings
é Press the cursor right button to enter the sound menu.
TV
4
Sound
8
Auto sound
Volume
Picture
Sound
Features
“ Select the menu items with the cursor up/down buttons and adjust the
settings with the cursor left/right buttons.
Control settings are at normal mid-range levels when the bar scale is
entered.
Balance
Sound mode
Alternate audio
Channels
Auto sound
Digital audio language
Mono/Stereo
AVL
Select Auto sound to display a list of predefined sound settings, each
corresponding to specific factory settings of Treble and Bass.
& Press the cursor right button to enter the list.
é Press the cursor up/down buttons to select a predefined sound setting.
Personal refers to the personal preference settings of sound in the sound
menu.
The moment you are in a predefined Auto sound setting and you modify a setting
in the Sound menu, all values of the menu will overwrite the previously made
personal setting.
Volume
This will adjust the sound output level.
Balance
This will adjust the output of the right and left speakers to obtain the best
stereo reproduction for your listening position.
ꢀ6
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound mode
Settings |TV
This selects the modes for stereo or surround sound reproduction dependent on
the broadcast signals or signals from external inputs received.
Sound
9
Sound mode
2
Stereo
Volume
25
0
Alternate audio (only selectable with analog broadcast signals)
This gives you the possibility to swap between the Main and Second Audio
Program (SAP) when it is available.
Virtual Dolby Surround
Balance
Sound mode
Alternate audio
Digital audio language
Mono/stereo
AVL
Digital audio language (only selectable with digital broadcast signals)
This allows you to select your language preference in case of multilingual audio
track programs.
Note:The default language for the digital channels is the installed menu
language.
Delta volume
This selects the modes for more spatial or surrouns sound reproduction.
Mono/Stereo (only selectable with digital broadcast signals)
This selects, per TV channel, Mono or Stereo sound.
Settings |TV
AVL (AutomaticVolume Leveler) (only available with analog broadcast and
non- Digital signals)
Sound
9
Delta volume
Volume
14
0
This automatically reduces the volume differences between channels and programs,
providing a more constant overall level. This will also reduce the dynamics of
sound.
Balance
Sound mode
Alternate audio
Digital audio language
Mono/stereo
AVL
Delta volume
This allows you to correct for any permanent volume differences between TV
channels or external sources.
Delta volume
This allows you to correct for any permanent volume differences between
TV channels or external sources.
features menu
& Select features in the TV Settings menu.
Settings
TV
4
Features
2
Closed captions
Sleeptimer
TV
Picture
é Press the cursor right to enter the features menu.
“ Select the menu items with the cursor up/down and adjust the settings with the
Sound
Settings |TV
Features
cursor left/right.
Channels
Features
2
Closed captions
3
Closed captions
Off
On
Sleeptimer
Closed captions
On during mute
This displays the transmitted CC- or CS-text on the screen according to your
chosen CC or CS service in the Setup, Features preferences menu,
p. ꢀ0.This text can either be permanently displayed (assuming that the service is
available in the broadcast) or only when mute is active.
The features men
& Press the cursor right after having selected Closed captions.
This displays the transmitted CC-text on theTV screen according to
your chosen CC service.This text can either be permanently displayed,
or only when mut is active.
é Select on, off or on during mute.
Settings |TV
Features
2
Sleeptimer
Closed captions
Sleeptimer
35
Sleeptimer
This sets a time period after which the TV automatically turns to standby.
35 Min
& Select Sleeptimer.
é Press the cursor right.
“ Select a value with the cursor up/down.The list will have values from 0 to 180
minutes.
This sets a time period after which theTV automatically turns to standby.
When 0 is selected, the sleeptimer is turned off.
You can always turn off your TV earlier or select another time set.
Manufactured under license from Dolby laboratories.
‘Dolby’ and the double-D symbol are trademarks of
Dolby laboratories.
ꢀ7
Download from Www.Somanuals.com. All Manuals Search And Download.
Channels menu
Settings
This menu can control special functions for the TV channels.
Channels
Lock after
7
TV
4
Picture
& Select Channels in the TV settings menu with the cursor up/down.
é Press the cursor right to enter the channels menu.
Channel lock
Sound
Features
Channels
TV ratings lock
“ Press the cursor up/down to select a channels menu item.
Movie ratings lock
Preferred channels
Region ratings lock
Clear region ratings
Lock after
Note: Lock after is only selectable if time is known. See Setup, Clock menu, p. 13.
This allows you to prevent the viewing of the channels after a selectable time
delay. locked channels can still be tuned, but the picture is blanked and the audio
is muted.
This menu can control special functions for theTV channels.
& Press the cursor right and you will be prompted to enter your PIN.
é Enter your 4-digit PIN code and select Timer on or off.
When set to on this allows you to set the clock.
Settings |TV
“ Select Time and press the cursor right.This allows you to set the time after
Channels
7
Lock after
which the lock is set.
Lock after
Please enter your PIN.
‘ Select AM or PM to select the correct period of the day.
Channel lock
TV ratings lock
( Enter the time with the digit or the cursor buttons and press oK to confirm.
Movie ratings lock
Preferred channels
Region ratings lock
Clear region ratings
Caution! If you have forgotten your PIn!
& Select Change PIn in the Menu preferences menu on p. ꢀ2 (Set/Change
This allows you to activate the childlock after a selectable time delay.
PIN) and press the cursor right.
é Press the cursor right to enter the overriding PIN code 0-7-1-1.
“ Press the cursor again and enter a new personal 4-digit PIN code.The
previous code is erased and the new PIN-code is stored.
Channel lock
This allows you to completely lock a certain TV channel or external source.
Select the channels or subchannels you want to lock and press oK to confirm.
Settings |TV
Channels
7
TV ratings lock
Please enter your PIN.
Lock after
TV ratings lock
Channel lock
TV ratings lock
Your TV is equipped with aV-chip.This allows you to control access to individual
programs based on their movie and TV ratings.All settings apply to all AV inputs,
except HDMI.The program content advisory data are sent by the broadcaster
or program provider.
x
x
x
x
Movie ratings lock
Preferred channels
Region ratings lock
Clear region ratings
& Select TV ratings lock with the cursor down.
é Press the cursor right to enter the list.You are asked to enter your code. (See
Set/Change PIN, p. ꢀ2.) If the code is correct, a list appears, showing the age-
based TV ratings and a corresponding content-based ratings list.
This allows you to limit access to individual programs based on theirTV
ratings and broadcastV-chip information.
“ Select an age-based TV rating with the cursor up/down, and enter, if present, the
list with content-based ratings with the cursor right, and select one content-
based rating.
Settings |TV | Channels
‘ Press oK to activate/de-activate the selected rating.
TV ratings lock
All
8
( Select another content-based rating if you like and press oK again.
None
You need only enter your PIN-code once while the menu is active.
You can lock/unlock any number of ratings on the list without re-entering your code.
TV-Y
TV-Y7
TV-G
Each ratings item has a box-graphic in front of it to indicate whether or not
programs carrying that rating are currently locked:
• box with a 'X': all items in the contents-based list are locked as well;
• empty box: the item is unselected;
TV-PG
TV-14
TV-MA
• box with a '/': some content-based ratings are selected/unselected.
This allows you to limit access to individual programs based on theirTV
ratings and broadcastV-chip information.
ꢀ8
Download from Www.Somanuals.com. All Manuals Search And Download.
When All has been selected, all items in the age-based and in the contents-based
lists are locked.
If, while All is selected, any other item, either an age-based or content-based item, is
unselected, then All is automatically unselected.
Age-based Rating Content-based Rating
none is the selection for items that either have no rating information or have a
rating of None. Both will be locked.
When an item on the age-based list is selected, all items below that item of the
same group are locked as well.
When you select a content-based rating, all identical content-based ratings in the
younger age-based categories are also selected.
All
none
None
TV-Y
TV-Y7
TV-G
TV-PG
none
none
(FV) FantasyViolence
none
(D) Dialog
(l) language
(S) Sex
appropriate for children of all ages with themes and elements suitable for children
aged 2-6
TV-Y
programs designed for children age 7 and older
TV-Y7
programs include fantasy violence more intense than other programs in the
TV-Y7-fV
(V)Violence
(D) Dialog
(l) language
(S) Sex
TV-Y7 category
TV-ꢀ4
programs suitable for all ages.These programs contain little or no violence, no
strong language and little or no sexual dialogue or situations
TV-G
programs contain elements that some parents may find unsuitable for younger
children and which may need parental guidance.The program may contain
moderate violence, sexual dialogue and/or situations and some strong language.
TV-PG
(V)Violence
(l) language
(S) Sex
TV-MA
programs contain elements that may not be suitable for children under ꢀ4 years
of age.These programs include one or more of the following:
intense violence, intense sexual situations, suggestive dialogue and strong
language.
TV-14
(V)Violence
programs are designed to be viewed by adults and may be unsuitable for children
under the age of ꢀ7.These programs may contain graphic violence, explicit sexual
activity and/or crude or indecent language.
TV-MA
Movie Ratings Lock
This function allows you to control access to individual movies based on their
MPAA ratings (Motion Picture Association of America).
Settings |TV
Channels
7
Movie ratings lock
& Select Movie ratings lock with the cursor down.
é Press the cursor right to enter the list.You are asked to enter your code. (See
Set/Change PIN, p. ꢀ2.) If the code is correct, a list appears, showing all valid
MPAA content ratings.
Please enter your PIN.
Lock after
Channel lock
TV ratings lock
Movie ratings lock
Preferred channels
x
x
x
x
“ Select a movie rating with the cursor up/down.
‘ Press oK to activate/de-activate the selected rating.
Region ratings lock
Clear region ratings
Each rating item has a box-graphic in front of it to indicate whether or not
programs carrying that rating are currently locked:
• box with a 'X': movies with this rating are locked;
Cancel
This allows you to limit access to individual programs based on their MPAA
ratings.
• empty box: movies with this rating are unlocked.
When All has been selected, all items on the movie ratings list become selected. (All
movies are locked.)
If, while All is selected, any other item is unselected, then All is automatically
unselected.
Settings |TV
Channels
7
Movie ratings lock
8
When nR has been selected, no other item is selected.
Lock after
All
Channel lock
NR
G
When any other item has been selected, all ratings below are selected as well, thus
all movies with those ratings will be locked.
TV ratings lock
Movie ratings lock
Preferred channels
Region ratings lock
Clear region ratings
PG
PG-13
R
nR not rated
G
movies with a mild content, suitable for all ages
NC-17
PG
movies for which parental guidance is recommended.They may contain a few
racy or violent scenes or maybe some bad language
X
This allows you to limit access to individual programs based on their MPAA
ratings.
PG-13movies for which parental guidance may be recommended if under age ꢀ3
R
restricted.The movies usually contain offensive sex or bad language and may
be unsuitable for children under the age of ꢀ7. Parental guidance or permission
needed.
nC-17 even with parental permission, forbidden under age ꢀ7. More offensive sex,
violence or bad language.
X
movies which generally focus on sex, violence and/or bad language.Also known
as pornography.
ꢀ9
Download from Www.Somanuals.com. All Manuals Search And Download.
Preferred channels
Settings |TV
A channel, when installed, is marked as preferred by default and added
to the channel list.This feature provides the ability to remove a channel
number from the channel list.
Channels
7
Preferred channels
x
Lock after
2
x
x
x
Channel lock
2.1
6
WCBS-DT
& Select Preferred channels with the cursor down.
é Press the cursor right to enter a list with all stored channel numbers.
“ Select the channel you want to remove with the cursor down.
‘ Press oK.
TV ratings lock
Movie ratings lock
Preferred channels
Region ratings lock
Clear region ratings
10
x
x
x
x
13
15
( Repeat to remove other channels.
18
35.1
MELCO
You can browse through theTV channels with the - P + button. Only those
channels which are in the preferred list, will be displayed.
Region ratings lock
Settings |TV
This function allows you to control access to digital programs based on
downloaded Region Ratings.
Channels
7
Region ratings lock
Please enter your PIN.
Lock after
& Select Region ratings lock with the cursor down.
Channel lock
é Press the cursor right to enter the list.You are asked to enter your code.
(See Set/Change PIN, p. ꢀ2.) if the code is correct, a list appears, showing
the Region ratings and a corresponding content-based ratings list.
x
x
x
x
TV ratings lock
Movie ratings lock
Preferred channels
Region ratings lock
Clear region ratings
“ Select a Region rating with the cursor up/down, and enter, if present,
the list with content-based ratings with the cursor right, and select one
content-based rating.
‘ Press oK to activate/de-activate the selected rating.
This allows you to control access to individual programs based on their
braodcasted regioanl rating.
( Select another content-based rating if you like and press oK again.
You need only enter your PIN-code once while the menu is active.
You can lock/unlock any number of ratings on the list without re-entering your
code.
Each ratings item has a box-graphic in front of it to indicate whether or not
programs carrying that rating are currently locked:
• box with a 'X': all items in the contents-based list are locked as well;
• empty box: the item is unselected;
• box with a '/': some content-based ratings are selected/unselected.
Clear region ratings
Settings |TV
This function allows you to clear all the Region Ratings settings.
& Select Clear region ratings with the cursor down.
Channels
7
Clear region ratings
Start now
Lock after
é Press the cursor right to enter the list.You are asked to enter your code.
Channel lock
(See Set/Change PIN, p.ꢀ2.)
TV ratings lock
Movie ratings lock
Preferred channels
Region ratings lock
Clear region ratings
“ Select Start now.
‘ Press oK to activate.
This allows you to clear all the locks you have set in the Region ratings lock table.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Accessory Devices
1 SetTop Box toTV
Using HDMI
A
Connect RF cable from wall to input at back of the cable box.
Set output switch on set-top box to CH 3 or 4 and tune TV to same
channel.
In some cases, cable box will automatically tune to channel 3 or 4. Just change channels
until picture appears.
B
Connect cable box to TV using HDMI cable.
Note: If the accessory device has DVI output only, use a DVI to HDMI adapter cable to
connect to the HDMI connector. You need to also connect the audio cable to L and R
AUDIO jacks. Next, go to Menu=>Setup=>Source=>Analog Audio In=> and
select HDMI.
Using Rf Cable
A
Connect RF cable from wall to input at the back of the cable box.
B
Use second RF cable to connect the cable box to the TV's antenna input.
This connection gives mono sound. For stereo sound use also composite
audio/video connection (Refer to panel 3).
DVD Player or DVD Recorder toTV
2
Using HDMI
Connect DVD player/DVD recorder to the TV using HDMI cable.
A
B
Turn on TV and DVD Player/DVD recorder. Press CH+ or CH- on remote
control to tune to the video supplied by HDMI.
Insert a prerecorded DVD into DVD player/DVD recorder and press PlAY
to verify correct connection.
C
DVD Player or DVD Recorder toTV
3
Using CompositeVideo Input (YPbPr)
A
B
Insert ComponentVideo connectors into their corresponding jacks on both
DVD player/DVD recorder and TV (Y, Pb and Pr).
Connect red/white audio cables into the audio output jacks on DVD player/
DVD recorder and audio AV inputs on TV.
C
Turn on TV and DVD player/DVD recorder. Press AV on remote control
until the connected source appears on TV screen.
Insert a pre-recorded DVD into DVD player/DVD recorder and press PLAY to verify
correct connection.
2ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Player/DVD Recorder/VCR toTV
4
Using S-Video
S-Video Input
A
B
Connect S-Video cable to S-Video input on back of TV and S-Video output
on the back of DVD/VCR player or recorder.
Connect audio cables (red/white) to audio AV inputs on back of TV and
Audio outputs on back of DVD/VCR player or recorder.
C
Turn on TV and DVD/VCR player or recorder. Press AV button on the
remote control until AVꢀ or AV2 appears on TV screen.
Back ofTV
Insert pre-recorded videotape/DVD into DVD/VCR player or recorder and
press PlAY to verify correct connection.
When you connect S-Video and AV2 at the same time, you can only hear sound
coming from AV2.
C
Back of DVD/VCR
DVD Player/DVD Recorder/VCR toTV
5
Using Composite Audio/Video Input
Composite Audio/video Input
A
B
Connect the video cable (yellow) to theVIDEO AV input on back of TV and
the corresponding video output on back.
Connect audio cables (red/white) to audio AV inputs on back of TV and the
corresponding audio outputs (l & R) on back of DVD/VCR player or
recorder.
C
Turn on the TV andVCR. Press AV button on the remote control until AVꢀ
or AV2 appears on TV screen.
Back ofTV
Insert pre-recorded videotape/DVD into DVD/VCR player or recorder and
press PlAY to verify correct connection.
C
Back of DVD/VCR
Video Camera/Games Console toTV
6
Using Composite Audio/Video Input
Connect the video cable (yellow) from the video output on camera (or
other device) to the video input (yellow) located on the side of TV.
A
Connect audio cables (red/white) from audio outputs on device to audio
inputs (red/white) on the side of TV.
B
C
Tip: For mono devices, connect only white audio cable from device’s audio
output to white audio input on the side ofTV.
Turn on TV and the device. Press the AV button on the remote control until
FRONT/SIDE appears on TV screen.
Press PlAY on the device to verify connection.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio to Hi-fi System (Digital)
7
Using SPDIf
A
Connect audio cable from the SPDIF jack on the rear of the TV to the
DIGITAl IN jack on the rear of the hi-fi system.
Tip:SPDIF (Sony and Philips Digital Interconnect Format) is highly recommended
for high quality digital sound output.
Audio to Hi-fi System (Analog)
8
Using AUDIo oUT
A
Connect audio cable from the AUDIO OUT on the rear of the TV to the
AUX/TV IN jack on the rear of the hi-fi system.
To select connected devices
&
Press the AV button repeatedly or select Source in the Settings menu
(see p. ꢀ3) to select AV1, AV2, AV3, HDMI, Side or TV, according to where
you connected your devices.
é
“
Press the cursor up/down button.
Press oK button.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia browser
Note:This is primarily for service only! It may work with certain memory devices but not with most camera
devices.
Multimedia browser lets you display pictures or play audio files stored on a USB
device.
The Multimedia browser application is invoked from the My Content menu
(press the MY ConTEnT button) by selecting the USB device and pressing
the cursor right.
Notes:
- Following file formats can be reproduced:
• For pictures: JPEG
• For audio: MP3, MP3 Pro
- Only FAT/DOS-formatted memory devices are supported.
- If your digital camera is not supported, make sure your camera is switched on and
verify if its configuration settings are correct (see the manual of your camera).
- Magnavox cannot be responsible if your USB device is not supported.
Viewing content from a USB device
Inserting a USB device
Note: USB devices are not supplied with thisTV.
Insert a USB device in the USB connector at the side of the TV.
When a USB device is inserted, the Multimedia browser menu is displayed
automatically, see further.
Removing the USB device
First switch off the My Content menu.To do so, navigate to the Multimedia
browser menu and press the MY ConTEnT button to exit the menu.
Remove the USB device.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia Browser menu
& Insert a USB device.
é Select the USB device under Multimedia with the cursor up/down.
The Multimedia browser will allow the user to browse content stored on
the inserted USB device.
USBDevice1
USBDevice1
Picture
Picture
London2005
The Beatles
Music
“ Press the cursor right.
Xmas2004.alb
arnold.jpg
eagle.jpg
The 2-panel browser will be shown with the left panel containing the
content types (Music,Picture).
The right panel will display the content that is available of the selected
content type.
USBDevice1
‘ Press the cursor up/down to select a content type and press the cursor
Picture
London2005
right to enter the content.
pic001.jpg
pic002.jpg
London2005
( Press the cursor up/down to select a file or a directory.
Note: Press the green color button to display all the image files in the current
directory as thumbnails when browsing pictures. Press the green button again to
display the image files in a list.
Press TheBeatles
Xmas2004.alb
pic003.jpg
pic004.jpg
pic005.jpg
pic006.jpg
pic007.jpg
pic008.jpg
arnold.jpg
eagle.jpg
In case a file is selected, press the oK button to display a picture file or to
play an audio file.
In case a directory, album or playlist is selected, press the cursor right
to enter the content or press the oK button to start a slide show or a
playback of the files present in the directory, album or playlist.
USBDevice1 London2005
( Press the cursor left to keep music playing and switch back to the
London2005
pic001.jpg
pic002.jpg
pic003.jpg
pic
pic001.jpg
Multimedia menu.
§ Press one of the color buttons on the remote control to perform the
corresponding function mentioned at the bottom of the screen.
The blue color button can be used to let the color re-appear.
To stop playing content, press the button on the remote control.
USBDevice1 London2005
pic001.jpg
pic
pic
pic
pic
London2005
Press O
pic001.jpg
1024:768
LIst
Press OK to play
Notes:
• YourTV supports slide shows with
background music.
• The playback will continue to play even if
function buttons at the bottom of the screen
temporarily switched to browser screens.The audio
will be stopped when another song starts playing, or
when the end has been reached.
• Progressive JPEG files are not supported.
• The length of the files should not exceed 128
characters.
Details
to display a description of the selected file or
directory;
Transitions
Slide time
to select if a transition during a slide show should
be applied;
to select the duration a picture will be displayed in
a slide show;
• Do not use a dot “.” in folder naming.
Rotate
to rotate a picture;
Repeat one/all
Shuffle
to repeat the playback of a music file;
to shuffle music collections in a random way;
following icons may appear:
other function buttons on the remote control
to stop displaying content;
to pause displaying content;
folder
to play a single file, start a slide show, playback of a
folder or other collection.
pictures
music
self made playlist/album
25
Download from Www.Somanuals.com. All Manuals Search And Download.
TroubleshootingTips
Check this List of Symptoms and Suggested StepsToTake before requesting Service. You may be able to solve the problem yourself. If
you face problems connecting theTV to external devices, please refer to the User Guide of the external device or call their service centers for
help. Charges forTV installation and adjustments of customer controls are not covered under your warranty.
SYMPToMS
SUGGESTED STEPSTo TAKE
Can't get external ꢀ. SPDIF output audio only in digital mode and the audio equipment used must have the decoder.
Hookup
audio equipment
to work with TV.
Can't get the AV
2. Monitor Out Audio lR output audio for both analog and digital programs
Press the AV button on the remote control repeatedly to select the desired AV channels. Note: SVHS
Installation
Installation
channels on theTV can only be selected if a S-VHS device is connected and powered on.
screen.
TV Displays
Wrong
Channel or No
Channels Above
ꢀ3
Go to TUnER MoDE in the television menu and select the correct signal source, then perform the
automatic installation again. (Refer to page 8).
Channel numbers
do not follow the
channel number
of the
Installation
Go to TUnER MoDE in the television menu and select the correct signal source, then perform the
automatic installation again. (Refer to page 8).
programs.
Auto programing is Auto programing may take 20 to 40 minutes depending on the number of channels that are available.
taking too long.
Installation
Settings
Error messages
appear on the
screen of TV:
no Signal
Check that the antenna / cable is connected properly and that you have selected the correct tuner
mode (refer to page 8).
no Program
There could be temporarily no transmission on the selected channel.You may like to add these
channels to the Weak Dig Sig. list. (refer to page 9). When transmission is resumed or when
available, your TV will receive it.
Audio only
The current channel has only audio transmission.
Disturbing sound
(such as buzzing,
clicking, cracking,
It is normal to hear a disturbing sound (such as buzzing, clicking, cracking, humming, whistling, etc)
from a distance less than 2 meters (6 feet) with the television sound muted.
If problem occurs on one channel, you may have a signal problem. Please contact the cable provider or
Sound
Sound
humming, whistling, local broadcaster regarding the specific channel.
etc).
Sound is not in
Stereo.
This could be due to any of the following reasons:
ꢀ. Not all transmitted broadcasts by the cable or broadcast stations are in STEREO.Try checking with
several major network stations to be sure that the station you selected is in STEREO.
2. When SAP is turned ON, the sound mode is automatically set to MONO.
3. Sound mode is set to MONO. Set the sound mode to STEREO. (Refer to page ꢀ7).
4. When using an AV input, the television will not display STEREO even though it is producing stereo
sound.
No power to the
TV
Check the TV power cord. Unplug the power cord from the TV, wait ꢀ0 seconds, then reinsert the
plug into your wall outlet. Power On the TV again.
General
Plug the power cord directly to the wall socket and not via an extension cord.
If you need to use an extension cord, check that the fuse on the AC power strip is not blown.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMPToMS
SUGGESTED STEPSTo TAKE
Ensure the batteries are inserted into the remote control according to the illustration in the battery
TV is not
General
responding to
Remote Control
compartment. Refer to page 4.
Reset the television by disconnecting the power plug from the wall
outlet for ꢀ0 seconds and then reconnecting it again.
Remote control is Clean the remote control and the remote control sensor window on the TV.
not working
General
General
Check the TV power cord. Unplug the TV, wait ꢀ0 seconds, then reinsert the plug into the wall.
Check antenna connections. Are they properly secured to the TV ANT 75 ohm plug?
No Picture on the
TV screen
Check the TUnER MoDE control for the correct tuner setting.
Try running the Autoprogram feature to find all available channels (refer to page 9).
Press the AV button on the remote control to make sure the correct signal source is selected
(FRONT,AVꢀ,AV2, Current Channel, etc.).
Note: SVHS can only be selected if a S-VHS device is connected and powered on.
TV Displays white Some DVD Discs are encoded with as much as 30% more video information to give the best
General
lines in letterbox
when viewing a
DVD disc
possible picture quality.With the DVD Player in the ꢀ6:9 picture format, the playback of this
type of disc with extra video information can produce a number of small white lines in the
upper portion of the black letterbox area.With some of these discs, this problem is inherent
and does not require a service call.
If your problem is not solved
Turn your TV off and then on again once.
Telephone number Magnavox Customer
Care Center: 1-800-705-2000
Please, have the Model and Product number which you can find at
the back of your television set ready, before calling.
never attempt to repair a defectiveTV yourself.
Check with your dealer or call a TV technician.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Aspect Ratio
The ratio between the width and height of the TV picture on the screen. In a normal TV set the aspect ratio is 4
to 3 (4:3).The new aspect ratio in HDTV is ꢀ6:9 which resembles the aspect ratio in a movie theatre
(Widescreen). New TV systems support both 4:3 and ꢀ6:9 aspect ratio and can automatically switch between
them.
AudioVideo (A/V) A term often used when discussing a channel on a TV receiver or on video equipment, which has been
especially designed to acceptVCR audio-video signals.This channel automatically activates special circuitry
within the TV set to prevent picture distortion and skewing. It is also used for audio-video processors, which
handle both types of signals.
ATSC
ATSC:Advanced Television Systems Committee. Formed to establish technical standards for advanced
television systems, including digital high definition television (HDTV).
CVBS
CompositeVideo Baseband Signal. In broadcast television this refers to the video signal,
including the colour information and syncs
DTV
Digital television. Generic term that refers to all digital television formats, including high-definition television
(HDTV) and standard-definition television (SDTV).
DOlBY Digital
Dolby Digital - Six-channel digital audio standard that is part of the U.S. digital television standard; also called AC-3 or Digital
5.ꢀ.The channels consist of front left, front right, front center, surround or rear left, surround or rear right, and a separate
subwoofer
Digital Tuner
HDTV
A digital tuner serves as the decoder required to receive and display digital broadcasts. It can be included inside TV sets or
via a set-top box.
The generally agreed upon definition of HDTV is approximately twice the vertical and horizontal picture resolution of
today’s NTSC TV, which essentially makes the picture twice as sharp. HDTV also has a screen ratio of ꢀ6:9 as compared
with most of today’s TV screens, which have a screen ratio of 4:3. HDTV offers reduced motion artifacts (i.e. ghosting, dot
crawl), and offers 5.ꢀ independent channels of CD-quality stereo surround sound, (also referred to as AC-3).
NTSC
National television system committee.The organization that developed the analog television standard currently in use in the
U.S., Canada, and Japan. Now generally used to refer to that standard.The NTSC standard combines blue, red, and green
signals modulated as an AM signal with an FM signal for audio.
Progressive Scan
Resolution
In Progressive Scanning all the horizontal scan lines are scanned on to the screen at one time.The Digital TV and HDTV
Standards accept both Interlaced Scan and Progressive Scan broadcast and display methods.
Resolution:A measurement of the finest (smallest) detail that is visible in a video image.TV Resolutions may be expressed as
number of pixels in an image; or more commonly,“As Total Number of (horizontally scanned) lines used to create the
image.
Standard Digital TV Resolutions:
SDTV: 480i - The picture is 704x480 pixels, 480p - The picture is 704x480 pixels.
HDTV: 720p - The picture is ꢀ280x720 pixels, ꢀ080i - The picture is ꢀ920xꢀ080 pixels, ꢀ080p - The picture is ꢀ920xꢀ080
pixels.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Cleaning
Placement of the TV
WARNING Concerning Stationary Images
on theTV Screen:
• To avoid cabinet warping, cabinet color changes, and increased
chance of set failure, do not place the TV where temperatures
can become excessively hot; for example, in direct sunlight or
near a heating appliance.
Do not leave picture border bars or stationary
images on screen for extended periods of time.
This can cause uneven picture-tube aging.
• Be sure to allow a free flow of air to and from the perforated
back cover of the set.
Normal use of the TV should involve the showing of pictures that
contain constantly moving and changing images that fill the
screen. Be careful not to leave nonmoving images on screen for
extended periods of time, or to display the same images on screen
too frequently, because subtle ghost images can be left on the
picture tubes. Avoid showing pictures with border bars or the
same stationary images more than 15 percent of your total
viewing in any one week. Sources of stationary images may be
broadcast channels, cable channels, satellite channels, digital
television boxes, DVD discs, laser discs, video games, CD-i
discs, videotapes, and others.Here are some examples
of stationary images (this is not an all-inclusive list;
you may encounter others in your viewing):
Cleaning
• To avoid possible shock hazard, be sure the TV is unplugged
from the electrical outlet before cleaning.
• Regularly dust the TV with a dry, non-scratching duster to keep
the TV clean.
• When cleaning the TV, take care not to scratch or damage the
screen surface. Avoid wearing jewelry or using anything
abrasive. Do not use household cleaners. Wipe the front screen
with a clean cloth dampened with water. Use even, easy,
vertical strokes when cleaning.
• Border bars— solid bars shown when viewing a standard (4:3)
picture and some widescreen movies on your widescreen
(16:9) TV
Specially designed screen-cleaning kits are also available.
These kits contain anti-static cleaners and cloths designed to
get into the ridges of the TV screen. Purchase the kits at stores
that sell electronics. Or call our Customer Care Center at
1-800-705-2000.
• DVD menus— listings of DVD disc content
• Video-game images and scoreboards
• Television station logos— present a problem if they are
bright and stationary; moving or low-contrast graphics are less
likely to cause uneven aging of the picture tube
• Gently wipe the cabinet surfaces with a clean cloth or sponge
dampened in a solution of cool, clear water and a mild soap or
detergent. Use a clean, dry cloth to dry the wiped surfaces.
• Stock-market tickers— presented at the bottom of the
• Occasionally vacuum the ventilation holes or slots in the back
cover of the set.
TV screen
• Shopping channel logos and pricing displays—bright
and shown constantly or repeatedly in the same location on
the TV screen.
• Never use thinners, insecticide sprays, or other chemicals on or
near the cabinet, as they might cause permanent marring of the
cabinet finish.
All picture tubes age with use, with their light output diminishing
over time. But by maintaining normal use—mixing television
picture types—you will create conditions in the tubes age at an
even rate. The result will be a TV picture that is evenly bright
over the entire screen.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
51MP6200D
PICTURE / DISPLAY
Aspect ratio
ꢀ6 : 9
Display screen type
Picture Enhancement
CRT Rear Projection TV
Pixel Plus, Progressive Scan, 3D combfilter, Black stretch,Active Control,Auto Picture (5 modes),
Transient improver, Digital Noise Reduction (DNR)
SoUnD
Ouput Power (RMS)
2 x ꢀ0W
Sound Enhancement
Sound System
AutoVolume leveller,
AutoSound (4 modes)
ConVEnIEnCE
Ease of installation
Auto Program
Channel list
RClU024
Ease of use
Remote control type
Remote control
Teletext
TV
Closed captioning
on SCREEn DISPLAY English, French, Spanish
LAnGUAGES
ConnECTIVITY
Back of TV
AVꢀ/AV2 :Audio l/R input, CompositeVideo input (CVBS), CompositeVideo input (YPbPr)
AV3:Audio l/R input, CompositeVideo input (CVBS), SPDIF output (Digital Only), S-Video input, HDMI
Side
Audio l/R input, CompositeVideo input (CVBS), S-Video input.
WEIGHT &
DIMEnSIonS :
Weight (incl. Packaging) :
ꢀ8ꢀ.5 Ibs
Weight (excl. Packaging) :
Carton Dimension
Product Dimension
Screen size :
ꢀ65 lbs
52.44 " x 26.73 " x 52.56 "
49.02 " x 23.03 " x 50.3ꢀ "
5ꢀ "
PoWER
ConSUMPTIon
STAnDBY PoWER
ConSUMPTIon
255 W
< 1 W
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Annex 1 - Magnavox TV software upgrade with portable memory
Introduction
Magnavox offers software upgrade capability for your TV using USB portable
memory.
After you have completed a software upgrade, your TV will typically perform
better.
What improvements are made depends on the upgrade software you are using as
well as the software your TV contained before the upgrade.
You can execute the software upgrade procedure yourself.
Be aware that the content of this document is addressing technical or software
skilled users.
Preparing a portable memory for software upgrade
For the procedure you will require:
• A personal computer with web browsing capability.
• An archive utility that supports the ZIP-format (e.g.WinZip for Windows or
StuffIt for Mac OS).
• A preferably empty USB memory stick.
Note: Only FAT/DOS-formatted portable memory is supported.
New software can be obtained from your dealer or can be downloaded from the
é Follow the procedure to find the information and the software related to your TV.
“ Select the latest software upgrade file and download it to your PC.
‘ Decompress the ZIP-file and copy the file “autorun.upg” to the root directory of
the USB portable memory.
web site.
Settings| Installation
Software upgrade
Current software info
Verifying the version of theTV software
Current software info
Local upgrades/applica...
Version:
ER10U-0.3.0.0_FB
Before starting the software upgrade procedure, it is advised to check what the
current TV software is.
Release notes:
Release for 2nd Spin:
ER10U-0.3.0.0_FB5.51
Generation date:
& Select Software Upgrade in the Installation menu.
é Press the cursor right.
2005-09-23 3:49:06 AM
The Software Upgrade menu moves to the left panel.
“ Select Current Software Info to observe the version and the description of the
current software.
3ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic software upgrade procedure
Settings | Installation
For automatic software upgrade, the “autorun.upg” file should be copy to
the root of the USB portable memory
Upgrade busy...
Software id:
Loading
TL32E-234
& Power off your TV and remove all memory devices.
Done
Done
é Insert the USB portable memory that contains the downloaded software
upgrade.
Validating
“ Switch on your TV with the power switch . at the right side of the TV.
Programming
‘ At startup the TV will scan the USB portable memory until it finds the
update content.The TV will automatically go to the upgrade mode.After a
few seconds it will display the status of the upgrade procedure.
Warning:
•You are not allowed to remove the USB portable memory during the software
upgrade procedure!
• In case of a power drop during the upgrade procedure, don’t remove the USB
portable memory from theTV.TheTV will continue the upgrade as soon as the
power comes back.
• If you try to upgrade to a software version lower than the current version, a
confirmation will be asked. Downgrading to older software should only be done in
case of real necessity.
• If an error occurs during the upgrade you should retry the procedure or contact
your dealer.
( When the software upgrade was successful, remove the USB portable
memory and restart your TV with the power switch . at the right side of
the TV.
Your TV will start up with the new software.
Note: Once the upgrade is finished use your PC to remove theTV software from
your USB portable memory.
Manual software upgrade procedure
Settings
Installation
Language
4
Software upgrade
2
For a manual software upgrade copy the “autorun.upg” file in a directory
called “Upgrades” located in the root of the USB portable memory.
Current software info
Local upgrades/app...
Autoprogram
Weak channel installation
Software upgrade
& Insert the portable memory that contains the downloaded software
upgrade.
é The TV will automatically start the content browser menu. Exit the menu by
pressing the MY ConTEnT key.
“ Select Software Upgrade in the Installation menu. Go to Local upgrades/
applications.
The TV will list all compatible images available on the USB portable memory
and display the data for each selected upgrade image.
This allows you to upgrade newTV software if available.
‘ Select the correct upgrade image and press the red color button to start
the upgrade.
Your TV will restart and will automatically go to the upgrade mode.After a
few seconds it will display the status of the upgrade procedure.
Warning:
If you try to upgrade to a software version equal or lower than the current version,
a confirmation will be asked. Downgrading to older software should only be done
in case of real necessity.
( When the software upgrade was successful, remove the USB portable
memory and restart your TV with the power switch . at the right side of
the TV.
Your TV will start up with the new software.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
|