Color
Television
Your Television’s
Directions for Use
Read this manual first!
Congratulations on purchasing this Philips product.
We’ve included everything you need to get started.
If you have any problems, Philips Representatives can
help you get the most from your new product by explaining:
• Hookups,
• First Time Setup, and
• Feature Operation.
Do not attempt to return this product to the store.
For fast help, call us first!
1-800-531-0039
Thank you for making Philips a part of your home!
3121 235 20081
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
16. Damage Requiring Service - The appliance should be
serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into the
appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or ground-
ing-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades
and third grounding prong. The wide blade or third prong
are provided for your safety. When the provided plug does
not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
17. Tilt/Stability - All televisions must comply with recommend-
ed international global safety standards for tilt and stability
properties of its cabinet design.
• Do not compromise these design standards by applying
excessive pull force to the front, or top, of the cabinet which
could ultimately overturn the product.
• Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet. Such
items could unsuspectingly fall from the top of the set and
cause product damage and/or personal injury.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
18. Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
11. Only use attachments/accessories specified by the manu-
facturer.
19. Power Lines - An outdoor antenna should be located away
12.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the app-
aratus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
from power lines.
20. Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges.
injury from tip-over.
13. Unplug this apparatus during lightning storms or when
Section 810 of the National Electric Code, ANSI/NFPA No.
70-1984, provides information with respect to proper
grounding of the mats and supporting structure grounding of
the lead-in wire to an antenna discharge unit, size of
grounding connectors, location of antenna-discharge unit,
connection to grounding electrodes and requirements for
the grounding electrode. See Figure below.
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. This product may contain lead and mercury. Disposal of
these materials may be regulated due to environmental con-
siderations. For disposal or recycling information, please
contact your local authorities or the Electronic Industries
21 Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the enclo-
sure through openings.
Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Example of Antenna Grounding
as per NEC - National Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
ELECTRIC SERVICE EQUIPMENT
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Here are a few of the special features built into this new
Color Television:
Introduction
Welcome/Registration of Your TV . . . . . . . . . . . . . . . . . . .2
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
SmartLock™ feature allows you to block the viewing of
certain channels where you might not want your children
viewing inappropriate material.
Getting Started
Basic Cable TV Connection . . . . . . . . . . . . . . . . . .5
Basic Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . .6
Basic VCR to Television Connection . . . . . . . . . . . . . . . . .7
Basic Television Operation . . . . . . . . . . . . . . . . . . . . . . . .8
Basic Remote Operation . . . . . . . . . . . . . . . . . . . . . . . . . .8
Description of Remote Control Buttons . . . . . . . . . . . . . . .9
Infrared Remote Control works your TV set, and allows
you to program certain features with the press of one button.
Standard broadcast (VHF/UHF) or Cable TV (CATV)
channel capability.
On-Screen Menu
Closed Captioning allows the viewer to read TV program
dialogue or voice conversations as on-screen text.
Install Features
How to Use the Language Control . . . . . . . . . . . . . . . . . .10
How to Use the Tuner Mode Control . . . . . . . . . . . . . . . .11
How to Auto Program TV Channels . . . . . . . . . . . . . . . . .12
How to Add or Delete Channels . . . . . . . . . . . . . . . . . . . .13
Automatic Programming of Channels for quick and easy
selection of favorite stations available in your area.
General Features
On-screen Features (in either English or Spanish) show
How to Use the Picture Adjustment Controls . . . . . . . . . .14
How to Set the TV for Closed Captioning . . . . . . . . . . . .15
How to Set the Sleeptimer Control . . . . . . . . . . . . . . . . . .16
Using the Alternate Channel Control . . . . . . . . . . . . . . . .17
Understanding the SmartLock Controls . . . . . . . . . . . . . .18
Setting Up the SmartLock Access Code . . . . . . . . . . . . . .19
How to Block Channels or Block All Channels . . . . . . . .20
How to Clear All Blocked Channels . . . . . . . . . . . . . . . . .21
Blocking Programming Based on Movie Ratings . . . . . . .22
Blocking Programming Based on TV Ratings . . . . . . . . .23
Other Blocking Options (Blocking, Unrated, No Rating) .24
helpful messages for setting of TV controls.
Sleeptimer automatically turns the TV OFF at preset times.
NOTE: This owner's manual may be used with sever-
al different television models. It is possible that some
features (and drawings) discussed in this manual may
vary slightly from those found with your television sys-
tem. Normally what is found in this manual will match
the features found on your new television. If yours
should look slightly different, it does not require you
contacting your dealer or requesting service.
General Information
Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . .25
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Factory Service Location . . . . . . . . . . . . . . . . . . . . . .26-27
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Magnavox, Auto Lock™
are all registered trademarks of Philips Consumer Electronics Company.
Copyright © 2001 All rights reserved.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOKING UP YOUR TV (BASIC CABLE TV CONNECTIONS)
our Cable TV input into your
Yhome may be a single (75 ohm)
cable, or a Converter Box installa-
tion. In either case the connection to
the TV is very easy. Just put the
threaded end of the cable signal to
the TV's antenna plug and screw it
down finger tight.
If your Cable TV signal is a single
round cable (75 ohm) then you're
ready to connect to the TV.
If you have a Cable Converter Box:
Connect the Cable TV signal to the
Cable Signal IN(put) plug on the
75
⍀
Converter.
Connect the Cable TV cable to the
75Ω plug on the TV.
If you have a Cable Converter Box:
Connect the OUT(put) plug from the
Converter to the 75Ω plug on the TV.
SMART HELP
2
Remember: Set the TV for the
type signal you've just connected
(see the “Tuner Mode” section on page
11 of this manual).
Cable TV Company
75 ⍀
Cable TV Signal Input
To select only the channel numbers on
your Cable system see “Auto Program"
(page 12). If you use a Cable Converter
box, set the TV to the same channel as
the converter's CH 3/4 switch (on the rear
of the converter).
Back of TV
OR
O
U
T
IN
Round Cable
75Ω Ohm
1
Cable TV Converter
Box Connection
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOKING UP YOUR TV (BASIC ANTENNA TV CONNECTIONS)
combination antenna receives
Anormal broadcast channels
Note: For homes with separate UHF and VHF antennas
you will need an optional combiner to connect to the TV.
(VHF 2-13 and UHF 14-69). Your
connection is easy since there is
only one 75Ω (ohm) antenna plug
on the back of your TV - and that’s
U/V
Combiner
where the antenna goes.
If your antenna has a round cable
(75 ohm) on the end, then you're ready
Back of TV
to connect it to the TV.
If your antenna has flat twin-lead wire
(300 ohm), you first need to attach the
75-300 Ohm Adapter
antenna wires to the screws on a 300 to
75 ohm adapter.
Push the round end of the adapter
(or antenna) onto the 75Ω plug on the
rear of the TV. If the round end of the
antenna wire is threaded, screw it down
finger tight.
SMART HELP
Remember: Be sure to set the
TV for the type signal you've
75
⍀
connected (see the “Tuner Mode” sec-
tion on page 11 of this manual.)
To set the TV to select only the channel
numbers in your area see how to
“Program" or "Add" channels in the
TV’s memory on page 12 (Auto
Program section).
To order any optional accessory contact
your dealer or the Philips Parts Center
at 1-800-851-8885.
2
300 to 75Ω
Adapter
1
75 ⍀
Combination VHF/UHF
Antenna
(Outdoor or Indoor)
Back of TV
Twin Lead
Wire
OR
Round Cable
75Ω
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOKING UP YOUR TV (BASIC TV TO VCR CONNECTIONS)
he basic Antenna, or Cable TV,
Tto VCR to TV connection is
shown to the right. For more infor-
mation on other hookups (possible
when Cable Converter/Descrambler
boxes are included) refer to your
accessory VCR and Cable
Converter Owner's Manual for
details.
Connect your Antenna or Cable
TV signal to the IN FROM
ANT(enna) plug on the VCR.
Connect the OUT TO TV plug on
75
⍀
the VCR to the 75Ω plug on the TV
(connecting cable supplied with the
VCR.)
Outdoor
VHF/UHF
Antenna
300 to 75Ω
Ohm Adapter
1
2
75 ⍀
OR
OUT TO TV
IN FROM ANT.
Back of TV
Cable TV signal
Round Cable
75Ω Supplied with VCR
7
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC TV/REMOTE OPERATIONS
TELEVISION
Press the POWER button to turn
the TV ON.
6
Note: You can also press any button on
the front of the TV to turn the TV ON.
Press the VOLUME + button to
increase the sound level, or the VOL-
UME – button to lower the sound
level.
ME
N
U
–
V
O
LUME
+
C
H
A
N
N
E
L
POWER
Pressing both Volume buttons at the
same time will display the on-screen
menu. Once in the menu, use these but-
ton to make adjustments or selections.
Remote Sensor Window
Press the CHANNEL UP ▲ or
DOWN ▼ button to select TV chan-
nels.
MENU
–
VOLUME +
CHANNEL
POWER
REMOTE
Point the remote control toward the
remote sensor window on the TV when
operating the TV with the remote.
1
3
2
R
E
W
O
P
3
2
4
BATTERY INSTALLATION
+
1
H
C
6
5
4
9
8
+
L
7
O
V
o load the supplied batteries into
C
C
0
–
H
C
L
/
A
O
V
Tthe remote:
S
U
T
A
T
S
U
N
E
M
T
I
X
E
E
T
U
M
1. Remove the battery compartment
lid on the back of the remote.
P
E
E
L
S
2. Place the batteries (2-AA) in the
remote. Be sure the (+) and (-) ends of
the batteries line up correctly (inside of
case is marked).
Battery Lid
3. Reattach the battery lid.
SMART HELP
Remember, the tuned channel
number will always briefly
appear when the TV is first turned ON
(and with channel changes).
Battery
Compartment
2 “AA” Batteries
You can also press the STATUS/EXIT
button (on the remote) to see what
channel the TV is ON.
Bottom of Remote Shown
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION OF REMOTE CONTROL BUTTONS
Power Button
Press to turn the TV ON and OFF.
Number Buttons
1
4
POWER
CH+
2
5
8
0
3
6
Press the number buttons to select TV channels. For single digit
entries, press the number of the channel you desire. The TV will
pause for a few seconds, then change to the selected channel.
Channel (+), (–) Buttons
Press to change the tuned channel.
CH–
7
9
Volume (+), (–) Buttons
Press to adjust the TV sound level.
CC
A/CH
VOL+
VOL–
CC Button
Press to select Closed Caption options within the menu.
STATUS
EXIT
A/CH Button
Press to toggle between the currently viewed channel and the pre-
viously viewed channel.
MENU
Status/Exit Button
Press to see the current channel number and the Clock (if set) on
the TV screen. Also press to clear the TV screen after control
adjustments.
SLEEP
MUTE
Cursor Buttons
Use these button to select and adjust the TV's onscreen menu.
Menu Button
Press for the on-screen menu to appear. Pressing the Menu but-
ton after menu selections are made will cause the menu to dis-
appear from the screen.
Sleep Button
Press to set the TV to automatically turn itself OFF.
Mute Button
Press to turn the sound OFF on the TV. Press again to return
the sound to its previous level.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE LANGUAGE CONTROL
or our Spanish speaking TV owners
Fan on-screen LANGUAGE option is
present. With the LANGUAGE control
you can set the TV’s on-screen menu to
be shown in either English or Spanish.
Press the MENU button on the
remote to show the on-screen menu.
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the on-screen menu until the INSTALL
control appears on the screen.
Brightness
+
–
Press the CURSOR RIGHT ᮣ
button to display the LANGUAGE
control.
Install
1
POWER
CH+
2
3
6
Press the CURSOR RIGHT ᮣ
button repeatedly to select ENGLISH
or ESPANOL (Spanish).
4
7
5
8
0
CH–
9
A/CH
CC
2
5
When finished, press the STATUS
/EXIT button to remove the menu
from the TV screen.
4
VOL–
STATUS
EXIT
3
Language
English
MENU
MUTE
1
OR
2
SMART HELP
Remember: The Language
control only makes the TV on-
screen MENU items appear in English
or Spanish text.
Idioma
Español
It does not change the other on-screen
text features such as Closed Caption
(CC) TV shows.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE TUNER MODE CONTROL
he TUNER MODE control allows
Tyou to change the TV’s signal input
to either ANTENNA, CABLE or AUTO
mode. It’s important for the TV to know
what type of signal to look for (either
Cable TV signal or a normal Antenna
signal). In the AUTO mode, when the
AUTO PROGRAM feature is activated,
the TV will automatically choose the
correct mode.
Press the MENU button on the
remote to show the on-screen menu.
Brightness
+
–
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the on-screen menu until the INSTALL
control appears on the screen.
Install
1
POWER
CH+
2
3
6
4
7
5
8
0
Press the CURSOR RIGHT ᮣ
button to display the LANGUAGE
control.
CH–
9
4
A/CH
CC
2
6
5
Press CURSOR UP ▲ or DOWN
▼ buttons to scroll the Install features
until the TUNER MODE control
appears on the screen.
VOL–
STATUS
EXIT
3
Language
English
MENU
MUTE
1
Press the CURSOR RIGHT ᮣ
button to select either ANTENNA,
CABLE, or AUTO mode.
2
4
When finished, press the STATUS
/EXIT button to remove the on-screen
menu from the TV screen.
Tuner Mode
Antenna
Tuner Mode
Tuner Mode
Cable
SMART HELP
When CABLE is selected,
channels 1-125 are available.
When ANTENNA is selected, channels
2-69 are available.
Auto
When AUTO is selected, the TV will
automatically set itself to the correct
mode (based on the type of signal it
detects when the AUTO PROGRAM
feature is activated).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO AUTOMATICALLY PROGRAM TV CHANNELS
our TV can automatically set itself
Yfor local area (or Cable TV) chan-
nels. This makes it easy for you to
select only the TV stations in your area
when the CHANNEL (+), (–) buttons
are pressed.
Note: Make sure the antenna or cable
signal connection has been completed
before AUTO PROGRAM is activated.
Press the MENU button on the
remote to show the on-screen menu.
Brightness
+
–
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the on-screen menu until the INSTALL
control appears on the screen.
Install
1
POWER
CH+
2
3
6
Press the CURSOR RIGHT ᮣ
button. “Language” control will appear
on the screen.
4
7
5
8
0
CH–
9
4
Press CURSOR UP ▲ or DOWN
▼ buttons to scroll the Install features
until the AUTO PROGRAM control
appears on the screen. Whatever chan-
nel you are tuned to at the time will
appear within the Auto Program con-
trol.
A/CH
CC
2
6
5
VOL–
STATUS
EXIT
3
Language
English
MENU
MUTE
1
Press the CURSOR RIGHT ᮣ
button to start the Auto Program scan-
ning of channels. Auto Programming
will store all available channels in the
TV’s memory, then tune to the lowest
available channel when done.
Tuner Mode
2
Antenna
4
When finished, press the STATUS
/EXIT button to remove the menu
from the TV screen.
Auto Program
3
SMART HELP
Try it out. Press the CHAN-
NEL (+), (–) buttons and see
which channels have been added to the
TV’s memory.
If you want to delete any unwanted chan-
nels from the TV’s memory, refer to the
section on adding and removing channels
(Channel Edit) on the next page.
Auto Program
7
12
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO ADD OR DELETE TV CHANNELS
hannel Edit makes it easy for you to
CADD or DELETE channels from
the list of channels stored in the TV’s
memory.
Press the MENU button on the
remote to show the on-screen menu.
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the on-screen menu until the INSTALL
control appears on the screen.
Brightness
+
–
Install
Press the CURSOR RIGHT ᮣ
button to display the INSTALL menu
features. “Language” control will
appear on the screen.
1
POWER
CH+
2
3
6
4
7
5
8
0
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll the Install
features until the CHANNEL EDIT
control appears on the screen.
Language
CH–
9
English
4
A/CH
CC
2
9
6
5
8
VOL–
STATUS
EXIT
3
Press the CURSOR RIGHT ᮣ
button to display the CHANNEL
EDIT options. “Program No.” will
appear on the screen.
MENU
8
Tuner Mode
6
Antenna
SLEE
MUTE
1
With the PROGRAM NO. option
displayed press the CUSOR RIGHT
ᮣ or LEFT ᮤ button to select the
channel you wish to add (Skipped
OFF), or delete (Skipped ON) from the
TV’s memory.
2
4
7
Auto Program
3
Press the CURSOR DOWN ▼ but-
ton to display the SKIPPED On/Off
control.
Press the CURSOR RIGHT ᮣ
button to select OFF or the CUR-
SOR LEFT ᮤ button to select ON.
If ON is selected the channel is
skipped when scrolling channels with
the CH + or – buttons. If OFF is select-
ed the channel is not skipped when
scrolling channels with the CH + or –
buttons.
Channel Edit
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
Skipped
On
Program No.
7
Off
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE PICTURE ADJUSTMENT CONTROLS
o adjust your TV picture controls,
Tselect a channel and follow the
steps shown below:
Press the MENU button on the
remote to display the on-screen menu.
Press the CURSOR RIGHT ᮣ or
the CURSOR LEFT ᮤ buttons to
increase or decrease the Brightness con-
trol values. The changes will be seen on
the TV picture.
Brightness
Press the CURSOR UP ▲ or
DOWN ▼ buttons to choose one of
the other Picture Adjustment controls
(Color, Picture, Sharpness, or Tint).
+
–
Color
+
+
+
+
–
–
–
–
Press the CURSOR RIGHT ᮣ or
the CURSOR LEFT ᮤ buttons to
adjust the select control. Repeat with
other controls until the desired picture
settings are obtained.
1
POWER
CH+
2
3
6
4
7
5
8
0
CH–
9
A/CH
CC
3
5
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
4
VOL–
STATUS
EXIT
2
Picture
Sharpness
Tint
4
MENU
2
SLEEP
MUTE
1
3
SMART HELP
BRIGHTNESS Press the ᮣ or
ᮤ buttons until darkest parts of the
picture are as bright as you prefer.
COLOR Press the ᮣ or ᮤ buttons to add
or decrease color.
PICTURE Press the ᮣ or ᮤ buttons until
lightest parts of the picture show good
detail.
SHARPNESS Press the ᮣ or ᮤ buttons
to improve detail in the picture.
TINT Press the ᮣ or ᮤ buttons to obtain
natural skin tones.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Let'
s
Loo
k
Insi
de!
HOW TO USE THE CLOSED CAPTION CONTROL
losed Captioning (CC) allows you
Cto read the voice content of televi-
sion programs on the TV screen.
Designed to help the hearing impaired,
this feature uses onscreen “text boxes”
to show dialogue and conversations
while the TV program is in progress.
Press the CC button on the remote
to display the on-screen Closed Caption
options.
CC Off
Press the CC button repeatedly to
toggle through the Closed Caption set-
tings. Choose CC Off, CC1, CC2 or
CC Mute. Dialogue (and descriptions)
for the action on the captioned TV pro-
gram will appear on-screen.
CC1
1
4
POWER
CH+
2
5
8
0
3
6
NOTE: If CC Mute is selected, whenev-
er the TV’s sound is muted the CC1
Closed Caption option will be activated.
CH–
7
9
A/CH
CC
VOL+
3
When finished, press the STATUS
/EXIT button to remove the menu from
the TV’s screen.
STATUS
EXIT
CC2
1
MENU
2
SLEEP
MUTE
SMART HELP
Not all TV programs and
product commercials are made
CC Mute
with Closed Caption (CC) information
included. Neither are all Closed Caption
modes (CC1, or CC2) necessarily being
used during the transmission of a closed
caption program. Refer to your area's
TV program listings for the stations and
times of Closed Caption shows.
CAPTION mode
Example Display
NOTE: The CC MUTE option
turns the Closed Caption mode
“ON” whenever the MUTE but-
ton on the remote is pressed.
This activates the CC1 option.
JOHN: Why did they move the
meeting up to this week?
MARSHA: I don't know, but they
are pushing to close the deal.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO SET UP THE SLEEPTIMER CONTROL
ave you ever fallen asleep in front
Hof the TV only to have it wake you
up at two in the morning with a test
pattern screeching in your ears? Well,
your TV can save you all that trouble
by automatically turning itself off.
Press the SLEEP button on the
remote control and the SLEEP timer
display will appear on the screen.
Press the SLEEP button repeatedly
to pick the amount of time (15, 30, 45,
60, 90, 120, 180 or 240 minutes) before
the TV will turn itself off.
Sleep Off
15
30
An on-screen count down will appear
during the last minute before the TV
shuts itself off.
1
4
POWER
CH+
2
5
8
0
3
6
CH–
7
9
A/CH
CC
VOL+
VOL–
45
STATUS
EXIT
2
MENU
SMART HELP
1
SLEEP
MUTE
The on-screen menu will time
out and disappear from the screen
when you finish. You can also press the
STATUS/EXIT button to clear the menu
from the screen.
60
90
120
180
During the last minute of a
SLEEP timer setting, an on-
screen count down will be dis-
played. Pressing any button
during the last minute will
cancel the SLEEP timer.
During the last 10 seconds of
a SLEEP timer setting, an
onscreen display will read
GOOD BYE.
240
Good Bye
9 Sec
45 Sec
16
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE ALTERNATE CHANNEL CONTROL
our remote has an A/CH (Alternate
YChannel) button. Pressing this but-
ton will toggle between the Current and
one previously selected channel.
Press the CH + or CH – button (or
the Numbered buttons) to select a chan-
nel to view. Then using the same but-
tons select a second channel to view.
12
Press the A/CH button repeatedly
24
to toggle between the two channels.
SMART HELP
This is a great feature to toggle
between two programs that your
interested in watching at the same time.
1
POWER
CH+
2
5
8
0
3
6
1
1
Remember, the A/CH will only toggle
the current channel and the last previ-
souly viewed channel.
CH–
7
9
12
A/CH
CC
VOL+
VOL–
STATUS
EXIT
2
MENU
SLEEP
MUTE
24
17
Download from Www.Somanuals.com. All Manuals Search And Download.
UNDERSTANDING THE SMARTLOCK CONTROLS
he SmartLock feature is an
Tintegrated circuit that receives
and processes data sent by broad-
casters, or other program
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
G
PG
PG-13
R
NC-17
X
providers, that contain program
content advisories. When pro-
grammed by the viewer, a TV with
SmartLock can respond to the con-
tent advisories and block program
content that may be found objec-
tionable (such as offensive lan-
guage, violence, sexual situations,
etc.). This is a great feature to cen-
sor the type of viewing children
may watch.
TV Rating
Movie Rating
Over the next few pages you’ll
learn how to block channels and
certain rated programming. Below
is a brief explanation of some terms
and ratings you will find in the
SmartLock feature.
MOVIE RATINGS
TV PARENTAL GUIDELINES
(MOTION PICTURE ASSOCIATION OF AMERICA)
(TV BROADCASTERS)
G: General Audience - All ages admitted.
Most parents would find this program suit-
able for all ages. This type of programming
contains little or no violence, no strong lan-
guage, and little or no sexual dialogue or
situations.
TV-Y - (All children -- This program is
TV
designed to be appropriate for all chil-
Y dren.) Designed for a very young audi-
ence, including children ages 2-6. This type of
programming is not expected to frighten
younger children.
SmartLock offers various
BLOCKING OPTION controls
from which to choose:
PG: Parental Guidance Suggested - This
programming contains material that parents
may find unsuitable for younger children. It
may contain one or more of the following:
moderate violence, some sexual situations,
infrequent coarse language, or some sugges-
tive dialogue.
TV-Y7 - (Directed to Older Children -
TV
- This program is designed for children
Y7 age 7 and above.) It may be more
Access Code: An Access Code
must be set to prevent children
from unblocking questionable or
censored programming set by their
parents.
appropriate for children who have acquired the
development skills needed to distinguish
between make-believe and reality. This pro-
gramming may include mild fantasy and comic
violence (FV).
PG-13: Parents Strongly Cautioned - This
programming contains material that parents
may find unsuitable for children under the
age of 13. It contains one or more of the fol-
lowing: violence, sexual situations, coarse
language, or suggestive dialogue.
Channel Block: After an access
code has been programmed, you
can block up to 5 individual chan-
nels.
TV-G - (General Audience -- Most par-
TV
ents would find this program suitable
Gfor all ages.) This type of programming
contains little or no violence, no strong lan-
guage, and little or no sexual dialogue or situa-
tions.
Clear Blocked: Allows you clear
all channels being blocked from
your viewing set with the Channel
Block Control.
R: Restricted -This is programming is specif-
ically designed for adults. Anyone under the
age of 17 should only view this program-
ming with an accompanying parent or adult
guardian. It contains one or more of the fol-
lowing: intense violence, intense sexual situ-
ations, strong coarse language, or intensely
suggestive dialogue.
TV-PG - (Parental Guidance
Suggested -- This program contains
material that parents may find unsuit-
TV
PG
able for younger children.) This type of pro-
gramming contains one or more of the follow-
ing: moderate violence (V), some sexual situa-
tions (S), infrequent coarse language (L), or
some suggestive dialogue (D).
Movie Ratings: Certain blocking
options exist which will block pro-
gramming based on ratings pat-
terned by the Motion Pictures
Association of America.
NC-17: No one under the age of 17 will be
admitted. - This type of programming should
be viewed by adults only. It contains graphic
violence, explicit sex, or crude indecent lan-
guage.
TV-14 - (Parents Strongly Cautioned -
TV
- This program contains some material
TV Ratings: Just like the Movie
Ratings, programs can be blocked
from viewing using standard TV
ratings set by TV broadcasters.
14 that many parents would find unsuitable
for children under 14 years of age.) This type
of programming contains one or more of the
following: intense violence (V), intense sexual
situations (S), strong coarse language (L), or
intensely suggestive dialogue (D).
X: Adults Only - This type of programming
contains one or more of the following: very
graphic violence, very graphic and explicit or
indecent sexual acts, very coarse and intense-
ly suggestive language.
To learn more about the Motion
Picture Association of America
Ratings and the TV Broadcasters
Television Ratings, refer to the defi-
nitions listed on the columns to the
right.
TV-MA - (Mature Audience Only --
This program is specifically designed to
be viewed by adults and therefore may
TV
MA
be unsuitable for children under 17.) This type
of programming contains one or more of the
following: graphic violence (V), explicit sexual
situations (S), or crude indecent language (L).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP THE SMARTLOCK ACCESS CODE
ver the next few pages you’ll learn
Ohow to block channels and get a
better understanding of the rating terms
for certain programming.
First, let’s start by learning how to set a
personal access code:
Brightness
+
–
Press the MENU button on the
SmartLock
remote to display the on-screen menu.
5
4
Press the CURSOR UP ▲ or
DOWN ▼ button until the
SmartLock control appears on the
screen.
1
4
POWER
2
5
8
0
6
CH+
CH–
7
9
A/CH
CC
2
Press the CURSOR RIGHT ᮣ
button to display the SmartLock
Access Code control.
VOL–
STATUS
EXIT
3
SmartLock
Access Code
– – – –
MENU
MUTE
1
Using the NUMBERED buttons,
enter 0, 7, 1, 1. “XXXX” appears on
the Access Code screen as you press the
numbered buttons.
2
6
“INCORRECT” will appear on the
screen, and you will need to enter 0, 7,
1, 1 again.
SmartLock
Access Code
XX– –
The screen will ask you to enter a
“New Code.” Enter a “new” 4 digit
code using the NUMBERED buttons.
The screen will then ask you to CON-
FIRM the code you just entered. Enter
your new code again. “XXXX” will
appear when you enter your new code
NOTE: The 0,7,1,1 access code shown
on this page is the default code or a
way to reset the code when the current
access code is not known.
SmartLock
Incorrect
XXXX
Access Code
Press the CURSOR DOWN ▼
button to display the first SmartLock
menu option “Movie Rating.”
Proceed to the next page to learn
more...
SmartLock
Incorrect
XX– –
SmartLock
New Code
SmartLock
New Code
Access Code
– – – –
XXX–
SMART HELP
Parents - it isn’t possible for
your child to unblock a channel
without knowing your access code or
changing it to a new one. If your code
changes, and you didn’t change it, then
you know it’s been altered by someone
else and blocked channels have been
viewed.
SmartLock
Confirmed
XXXX
SmartLock
SmartLock
Confirm Code
Confirm Code
– – – –
Confirm Code
XXX –
The SmartLock
Access Code also
can be changed
anytime using the
Setup Code feature
Movie Rating
Setup Code
19
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO BLOCK CHANNELS OR BLOCK ALL CHANNELS
fter your personal access code has
Abeen set (see previous page), you
are now ready to select the channels
you want to block out or censor.
Press the NUMBERED (or CH +,
–) buttons to tune the channel you
wish to block or censor.
Brightness
+
–
Press the MENU button on the
remote to show the on-screen menu.
SmartLock
5
Press the CURSOR UP ▲ button
and the SmartLock control will appear
on the screen.
1
1
POWER
2
6
4
7
CH+
5
8
0
8
CH–
9
Press the CURSOR RIGHT ᮣ
button to display the SmartLock
Access Code control.
SmartLock
6
Access Code
– – – –
A/CH
CC
3
7
7
VOL–
STATUS
X
4
MENU
Enter the correct access code
number. “XXXX” shows on the
Access Code display as you press the
NUMBERED buttons. SmartLock
menu options will be displayed starting
with “Setup Code”.
MUTE
2
SmartLock
Access Code
XXXX
6
8
Setup Code
Press the CURSOR UP ▲ or
DOWN ▼ buttons until the Blocking
control appears on the screen.
Press the CURSOR RIGHT ᮣ or
LEFT ᮤ button to turn blocking ON
or OFF for that channel. When ON is
selected the channel will be blocked.
Repeat for other channels you would
like to block.
Movie Rating
TV Rating
Blocking
On
Off
Or, press the CURSOR UP ▲ or
DOWN ▼ buttons to select the Block
All control. When ON is selected, ALL
currently available channels will be
blocked from viewing.
Block Channel
On
Unrated
On
No Rating
On
Off
Off
Off
SMART HELP
Channel 9
Blocked By SmartLock
Channel Blocking
If you tune to a blocked chan-
nel and enter your Access Code
Access Code
– – – –
to view the channel, ALL blocked chan-
nels will be viewable until the TV has
been turned off. When the TV is pow-
ered back ON, the previously blocked
channels will be blocked again.
Block All
On
Clear All
On
Off
Off
Enter your Access Code to
view a tuned channel that is
blocked with Block Channel.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CLEAR ALL BLOCKED CHANNELS
fter you’ve blocked several chan-
Anels there may come a time when
you want to unblock all blocked chan-
nels. The following steps discuss that
process.
Press the MENU button on the
remote to show the on-screen menu.
Brightness
+
–
Press the CURSOR UP ▲ button
and the SmartLock control will appear
on the screen.
SmartLock
7
4
Press the CURSOR RIGHT ᮣ
button to display the SmartLock
Access Code control.
1
4
POWER
2
5
8
0
6
CH+
CH–
7
9
SmartLock
5
Access Code
– – – –
Enter the correct access code
number. “XXXX” shows on the
Access Code display as you press the
NUMBERED buttons. SmartLock
menu options will be displayed starting
with “Setup Code”.
A/CH
CC
2
6
6
VOL–
STATUS
XT
3
MENU
MUTE
1
SmartLock
Access Code
XXXX
5
Press the CURSOR UP ▲ or
DOWN ▼ buttons until the Clear All
control appears on the screen. Clear?
will appear at the bottom right of the
control.
Setup Code
Press the CURSOR LEFT ᮤ or
CURSOR RIGHT ᮣ button to Clear
All blocked channels.
Or, enter your Access Code on any
blocked channel. ALL blocked chan-
nels will be unblocked until the TV is
powered OFF, then ON again. This will
restore the blocked channels.
Movie Rating
TV Rating
Blocking
On
Off
Block Channel
On
Unrated
On
No Rating
On
SMART HELP
Off
Off
Off
Remember, if you tune to a
blocked channel and enter your
Access Code to view the channel, ALL
blocked channels will be viewable until
the TV has been turned off. When the
TV is powered back ON, the previously
blocked channels will be blocked again.
Channel 9
Blocked By SmartLock
Channel Blocking
Access Code
– – – –
Clear All
Clear?
If Clear All is activated, ALL blocked channels will be unblocked
permanently or, enter your Access Code to view a tuned channel
that is blocked with Block Channel. this will unblock ALL chan-
nels until the TV is turned OFF and then ON again.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
BLOCKING PROGRAMMING BASED ON MOVIE RATINGS
here are two types of program rat-
Tings within the SmartLock feature.
One is based on the Movie Industry rat-
ings while the other is based on the TV
Industry ratings. Both can be used to
block or censor programming that has
been rated in either manner.
Let’s first look at the Movie Rating
options of SmartLock:
Brightness
+
–
SmartLock
Press the MENU button on the
remote to show the on-screen menu.
4
1
4
POWER
2
5
8
0
6
CH+
Press the CURSOR UP ▲ button
and the SmartLock control will appear
on the screen.
7
CH–
7
9
SmartLock
5
Access Code
– – – –
A/CH
CC
2
8
8
6
VOL–
STATUS
I
3
Press the CURSOR RIGHT ᮣ
button to display the SmartLock
Access Code control.
NOTE: Remember, if
you ever forget your
Access Code, the 0,7,1,1
access code is the default
code or a way to reset
the code when the cur-
rent access code is not
known.
MENU
MUTE
1
SmartLock
Access Code
XXXX
Enter the correct access code
number. “XXXX” shows on the
Access Code display as you press the
NUMBERED buttons. SmartLock
menu options will be displayed starting
with “Setup Code”.
5
7
Setup Code
Press the CURSOR UP ▲ or
DOWN ▼ buttons until the Movie
Rating control appears on the screen.
Press the CURSOR RIGHT ᮣ
button to display the first of the
Movie Rating options (G).
Movie Rating
G
On
PG
On
Off
Off
Press the CURSOR UP
▲
or
DOWN ▼ button to display any of
the Movie Rating (G, PG, PG-13, R,
NC-17, or X) options.
When displayed, Press the CUR-
SOR RIGHT ᮣ button to turn the
option OFF (which will allow viewing),
or press the LEFT ᮤ button to turn the
option ON (which will allow blocking).
NC-17
On
PG-13
On
R
On
Off
Off
Off
Channel 9
Each Movie
Blocked By SmartLock
Movie Rating
Rating can be
turned “ON”
or “OFF.”
Access Code
– – – –
X
On
Off
SMART HELP
When a rating is set to block,
all higher ratings will be auto-
matically blocked as well. Example: If
the the PG-13 rating is set to block, the
R, NC-17, and X ratings will also be
blocked.
To view a program blocked by
the Movie Rating options, enter
your 4 digit access code. This
will disable all blocked Movie
Ratings until the TV is powered
off and on again. Then the block-
ing options will be restored.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
BLOCKING PROGRAMMING BASED ON TV RATINGS
his portion of of the SmartLock fea-
Tture blocks programming based on
the TV Industry rating system.
After selecting the Smartlock feature
and entering your personal access
code, the SmartLock options screen
appears;
TV Rating
TV-Y
On
Scroll the menu using the CUR-
SOR UP ▲ or DOWN ▼ buttons
until the TV RATING control appears
on the screen.
Off
1
4
POWER
CH+
2
5
8
0
3
6
To view a program
blocked by the TV
Rating options, enter
your 4 digit access
code. This will dis-
able all blocked TV
Ratings until the TV
is powered off and on
again. Then the
CH–
7
9
Press the CURSOR RIGHT ᮣ but-
ton to display the first TV Rating
option (TV-Y).
TV-Y7
4
A/CH
CC
1
5
5
3
3
VOL–
STATUS
XIT
2
MENU
When displayed, press the CUR-
SOR RIGHT ᮣ button to turn the
control ON (will block TV-Y program-
ming), or press the CURSOR LEFT
ᮤ button to turn the control OFF (will
allow viewing of TV-Y programming).
Repeat for the TV-G option.
SLEEP
MUTE
TV-G
On
Off
1
4
blocking options will
be restored.
TV-PG
The ratings of TV-Y7, TV-PG, TV-14,
TV-MA can be customized to block V
(violence), FV (fantasy violence), S
(sexual situations), L (coarse language),
or D (suggestive dialogue).
Channel 9
Blocked By SmartLock
TV Rating
Press the CURSOR UP ▲ or
DOWN ▼ button to display the
desired rating control.
Access Code
– – – –
TV-14
TV-MA
Use the CURSOR RIGHT ᮣ but-
ton on the remote to display the rating
sub-menu. Scroll each setting and press
the CURSOR RIGHT ᮣ button to
turn the select control ON or press the
CURSOR LEFT ᮤ button to turn it
OFF.
TV-Y7, TV-PG, TV-14, TV-MA Sub-menu options to block TV ratings.
Block All
On
D
FV
On
On
Off
Off
Off
Off
Off
Off
TV Ratings and Rating Sub-Menus
When a TV Rating is selected to block,
ALL higher ratings will be blocked also.
L
On
S
On
V
On
TV-Y - (All children -- This program is designed to be appropriate for all children.) Designed for a very young audience, including children ages 2-6. This type of pro-
gramming is not expected to frighten younger children.
TV-Y7 - (Directed to Older Children -- This program is designed for children age 7 and above.) It may be more appropriate for children who have acquired the develop-
ment skills needed to distinguish between make-believe and reality. This programming may include mild fantasy and comic violence (FV).
TV-G - (General Audience -- Most parents would find this program suitable for all ages.) This type of programming contains little or no violence, no strong language and
little or no sexual dialogue or situations.
TV-PG - (Parental Guidance Suggested -- This program contains material that parents may find unsuitable for younger children.)This type of programming contains one
or more of the following: some suggestive dialogue (D), infrequent coarse language (L), some sexual situations (S), or moderate violence (V).
TV-14 - (Parents Strongly Cautioned -- This program contains some material that many parents would find unsuitable for children under 14 years of age.) This type of
programming contains one or more of the following: intensely suggestive dialogue (D), strong coarse language (L), intense sexual situations (S), or intense violence (V).
TV-MA - (Mature Audience Only -- This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 17.) This type of
programming contains one or more of the following: crude indecent language (L), explicit sexual situations (S), or graphic violence (V).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER BLOCKING OPTIONS (BLOCKING, UNRATED, NO RATING)
martLock offers the viewer addition-
Sal blocking features as well. With
these Blocking Option features, censor-
ing can be turned ON or OFF for
Unrated or Non Rated programming.
Brightness
Press the MENU button on the
+
–
remote to show the on-screen menu.
SmartLock
Press the CURSOR UP ▲ button
and the SmartLock control will appear
on the screen.
4
1
4
POWER
2
5
8
0
6
CH+
Press the CURSOR RIGHT ᮣ
button to display the SmartLock
Access Code control.
CH–
7
7
9
SmartLock
5
Access Code
– – – –
A/CH
CC
2
7
6
VOL–
STATUS
EXIT
3
Enter the correct access code
number. “XXXX” shows on the
Access Code display as you press the
NUMBERED buttons. SmartLock
menu options will be displayed starting
with “Setup Code”.
MENU
LEEP
MUTE
6
SmartLock
Access Code
XXXX
1
5
7
Press the CURSOR UP ▲ or
DOWN ▼ buttons until the Blocking,
Unrated, or No Rating control appears
on the screen.
Setup Code
When displayed, Press the CUR-
SOR RIGHT ᮣ button to turn the
option OFF (which will allow viewing)
or press the LEFT ᮤ button to turn the
option ON (which will allow blocking).
TV Rating
Movie Rating
Blocking
On
Off
When finished, press the STATUS
/EXIT button to remove the menu item
from the TV screen.
Channel 9
Blocked By SmartLock
Content Advisory
Access Code
– – – –
Unrated
On
No Rating
On
Off
Off
NOTE: Remember, if you ever forget
your Access Code, the 0,7,1,1 access
code is the default code or a way to
reset the code when the current access
code is not known.
If the BLOCK UNRATED or BLOCK NO
RATINGS controls are turned ON, all unrated
programs and programs containing NO content
advisory data will display the screen shown
above. To watch the channel enter your access
code, or change the BLOCK UNRATED and
BLOCK NO RATINGS back to off.
OTHER BLOCKING OPTION DEFINITIONS:
BLOCKING: This is what might be called the “master switch” for SmartLock. When in the OFF position, ALL blocking/cen-
soring is turned off (or disabled). When in the ON position, ALL blocking based on specifically blocked settings will take place.
UNRATED: ALL unrated programs based on the Movie Ratings or TV Ratings can be blocked if this feature is set to ON and
the BLOCKING feature is set to ON.
NO RATING: ALL programming with NO content advisory data can be blocked if this feature is set to ON and the BLOCK-
ING feature is set to ON.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING TIPS
CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or
TV information channel) which shows a constant non-moving pattern on the TV screen,
can cause picture tube damage. When your TV is continuously used with such a source
the pattern of the non-moving portion of the game (CDI, etc.) could leave an image
permanently on the picture tube. When not in use, turn the video source OFF.
Regularly alternate the use of such video sources with normal TV viewing.
lease make these simple checks
Pbefore calling for service. These
tips can save you time and money since
charges for TV installation and adjust-
ment of customer controls are not cov-
ered under your warranty.
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into
outlet and push POWER button again.
No Power
• Check that outlet is not on a wall switch. Be sure fuse is not blown on AC Power strip.
• Check antenna connections. Are they properly secured to the TV's 75Ω plug?
No Picture
No Sound
• Check the TUNER MODE control for CABLE or ANTENNA setting.
• Check the VOLUME buttons.
• Check the MUTE button on the remote control.
• Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries
if necessary.
• Clean the remote and the remote sensor window on the TV.
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into
outlet and push POWER button again. Be sure fuse is not blown on AC Power strip.
• Check to be sure TV outlet is not on a wall switch.
Remote Does Not
Work
TV Displays Wrong
Channel or No
Channels Above 13
• Repeat channel selection.
• Add desired channel numbers (CHANNEL control) into TV memory.
• Check to be sure the TUNER MODE control is set to the CABLE option.
INDEX
Alternate Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Closed Captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Antenna TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Color Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
SmartLock Controls
Factory Service Information . . . . . . . . . . . . . . . . . . . . . . .26-27
Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Blocking Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Language Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Blocking Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Picture Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Clear All Blocked Channels . . . . . . . . . . . . . . . . . . . . . . .21 Registration Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Movie Rating Controls . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
TV Rating Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Understanding SmartLock . . . . . . . . . . . . . . . . . . . . . . . .18 Sharpness Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Auto Program Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Sleeptimer Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Basic Remote Control Operation . . . . . . . . . . . . . . . . . . . . . . .8 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Basic TV Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Tint Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Basic VCR to TV Connection . . . . . . . . . . . . . . . . . . . . . . . . .7 Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Brightness Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Tuner Mode Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Cable TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Channel Edit Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
25
Download from Www.Somanuals.com. All Manuals Search And Download.
FACTORY SERVICE LOCATIONS
Detroit/Toledo
•
Cleveland/
•
•
N Ohio •
•
Chicago
★Columbus
•
San Francisco/Metro Area
★Los Angeles
Charlotte
★
•
★Pittsburgh/WV Area
Knoxville/E Tennessee
•
•
•
Philadelphia/S New Jersey
Atlanta/N Georgia
• Dallas
★Wash/Balt
★Orlando
•
Houston
Tampa/W Florida
★Ft. Myers/SW Florida
★Miami/SE Florida
•
★Indicates In-Home Service Only
• Indicates In-Home/Carry-In Service
NOTE: If you reside in one of our Philips Factory Service Branch areas (see directory on back), you can contact the nearest Service Branch to obtain
efficient and expedient repair for your product. If your product is In-Warranty, you should have proof-of-purchase to ensure No Charge Service. For
Out-of-Warranty service, call the location nearest you.
NOTA: Si vous résidez dans une des régions desservies par une succursale de service après vente du fabricant Philips (voir liste ci-dessous), vous
pourrez contacter la branche de service après vente la plus près de chez vous pour obtenir un service après vente rapide et efficace. Si le produit est
sous garantie, il suffira de présenter une preuve d`achat pour bénéficier d'un service sans frais. Pour les produits non couverts par la garantie, con-
tactez le centre le plus près de chez vous.
NOTA: Si Ud. reside en una de nuestras zonas para sucursales Philips de servicio al de fábrica (ver directorio más abajo), Ud. puede comunicarse con
la sucursal de servicio más cercana para obtener una reparación oportuna y eficaz de su producto. Si su producto está todavía bajo garantía, Ud.
debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio. Para servicio después del vencimiento de la garantía, llame
al lugar más cercano de los abajo indicados.
In Canada
How you can obtain efficient and expedient carry-in, mail-in, or in-home service for your product
Please contact Philips at
1-800-661-6162 (French speaking)
1-800-363-7278 (English speaking)
Au Canada
Comment obtenir le service après-vente pour les produits apportés ou envoyés par la poste à notre centre de service ou le service à domicile
Veuillez contacter philips á:
1-800-661-6162 (Francophone)
1-800-363-7278
En el Canadá
Cómo recibir servicio efficiente para su producto, en persona, por correo o a domicillo
Favor de comunicarse con Philips al:
1-800-661-6162 (francófono)
1-800-363-7278 (anglófono)
EL4482-3 Rev. CC
3135 015 07541
MAC2929 Rev. BB - 1/1/2001
26
Download from Www.Somanuals.com. All Manuals Search And Download.
FACTORY SERVICE LOCATIONS
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER
NEAR YOU. YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF
MIND,
KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS’ FACTORY SERVICE.
COMMENT OBTENIR NOTRE SERVICE APRÈS VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER, À DOMICILE, OU EN SE PRÉSENTANT À UN CENTRE DE SERVICE PHILIPS. PLUS DE 600 CENTRES
DE RÉCEPTION DE PRODUITS À RÉPARER À TRAVERS LE PAYS: CONTACTER LE CENTRE DE SERVICE AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR L’EMPLACEMENT DE CES DÉPÔTS
DANS UN RAYON DE 50 À 75 MILES (80 KM À 120 KM) DU CENTRE DE SERVICE LOCAL.
CÓMO OBTENER UN SERVICIO OPORTUNO Y EFICIENTE POR CORREO, EN CASA O EN PERSONA PARA SU PRODUCTO A TRAVÉS DE UN CENTRO PHILIPS DE SERVICIO. MAS DE 600 SITIOS POR
TODO EL PAIS PARA LA RECEPCION DE PRODUCTOS NECESITADOS DE REPARACIONES: COMUNICARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO PARA ESTOS LUGARES DENTRO
DE UN RADIO DE 80 A 120 KM (50 A 75 MILLAS) DEL CENTRO DE SERVICIO LOCAL.
ATLANTA
CLEVELAND
CHICAGO
Philips Factory Service
200 N. Cobb Pkwy., Suite 120
Marietta, GA 30062
800-273-1501
Philips Factory Service
950 Keynote Circle
Brooklyn Heights, OH 44131
800-331-7037
Philips Factory Service
1279 W. Hamilton Pkwy.
Itasca, IL 60143
800-531-2922
TAMPA
DETROIT
KNOXVILLE
Philips Factory Service
1911 US Highway 301 North
Tampa, FL 33619
800-442-2027
Philips Factory Service
25173 Dequindre
Madison Heights, MI 48071
800-438-1398
Philips Factory Service
6700 D Papermill Rd.
Knoxville, TN 37919
800-821-1767
SAN FRANCISCO
Philips Factory Service
681 East Brokaw Rd.
San Jose, CA 95112
800-300-9013
DALLAS
PHILADELPHIA
Philips Factory Service
415 N. Main Street, #107
Euless, TX 76040
800-952-3254
Philips Factory Service
352 Dunks Ferry Rd.
Bensalem, PA 19020
800-847-9320
HOUSTON
Philips Factory Service
1110 N. Post Oak Rd., Suite 100
Houston, TX 77055
800-952-3254
MAC2929 1/1/2001
27
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED W ARRANTY
CO LO R TELEVISIO N
90 Days Free Labor
One Year Free Replacement of Parts (Two Years Free Replacement on Color Picture Tube)
This product can be repaired in-home.
W HO IS CO VERED?
MAKE SURE YO U KEEP...
You must have proof of purchase to receive warranty service. A sales
receipt or other document showing that you purchased the product is
considered proof of purchase.
Please keep your sales receipt or other document showing proof of
purchase. Attach it to this owner’s manual and keep both nearby.
Also keep the original box and packing material in case you need to
return your product.
W HAT IS CO VERED?
BEFO RE REQ UESTING SERVICE...
Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a service
call.
Warranty coverage begins the day you buy your product. For 90 days
thereafter, all parts will be repaired or replaced free, and labor is free.
From 90 days to one year from the day of purchase, all parts will be
repaired or replaced free, but you pay for all labor charges. From one
to two years from the day of purchase, you pay for the replacement
or repair of all parts except the picture tube, and for all labor charges.
After two years from the day of purchase, you pay for the replace-
ment or repair of all parts, and for all labor charges.
TO GET W ARRANTY SERVICE IN U.S.A.,
PUERTO RICO O R U.S. VIRGIN ISLANDS...
Contact a Philips factory service center (see enclosed list) or author-
ized service center to arrange repair.
All parts, including repaired and replaced parts, are covered only for
the original warranty period. When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires.
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties,
including implied warranties of merchantability and fitness for a partic-
ular purpose, are limited in duration to the duration of this express
warranty. But, because some states do not allow limitations on how
long an implied warranty may last, this limitation may not apply to
you.)
W HAT IS EXCLUDED?
Your warranty does not cover:
•
labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.
TO GET W ARRANTY SERVICE IN CANADA...
Please contact Philips at:
•
product repair and/or part replacement because of misuse, acci-
dent, unauthorized repair or other cause not within the control of
Philips Consumer Electronics Company.
1-800-894-5463
1-800-363-7278
•
•
reception problems caused by signal conditions or cable or antenna
systems outside the unit.
a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
(In Canada, this warranty is given in lieu of all other warranties. No
other warranties are expressed or implied, including any implied war-
ranties of merchantability or fitness for a particular purpose. Philips is
not liable under any circumstances for any direct, indirect, special, inci-
dental or consequential damages, howsoever incurred, even if notified
of the possibility of such damages.)
•
incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or conse-
quential damages, so the above exclusion may not apply to you.
This includes, but is not limited to, prerecorded material, whether
copyrighted or not copyrighted.)
REMEMBER...
• a product used for commercial or institutional purposes.
Please record the model and serial numbers found on the product
below. Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
W HERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where the product is offi-
cially distributed by Philips Consumer Electronics Company. In coun-
tries where Philips Consumer Electronics Company does not distrib-
ute the product, the local Philips service organization will attempt to
provide service (although there may be a delay if the appropriate spare
parts and technical manual(s) are not readily available).
MODEL # ________________________________________________
SERIAL # ________________________________________________
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips Consum er Electronics Com pany, P.O . Box 2976, Longview, Texas 75606,
(903) 242-4800
Printed in U.S.A.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
|