Owner’s Manual
NB500MG1F
Blu-ray Disc Player
Read your Owner’s Manual first for
quick tips that make using your
Magnavox product more enjoyable.
If you have read assistance,
you may access our online help at
or call
1-800-605-8610
while with your product
(and Model / Serial number)
© 2011 Funai Electric Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Safety Instructions
The model and serial numbers of this unit may be found on the cabinet.
You should record and retain those numbers for future reference.
Model No.:
Serial No.:
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
The lightning flash with arrowhead symbol, within an
CAUTION
equilateral triangle, is intended to alert the user to the
presence of uninsulated“dangerous voltage”within the
RISK OF ELECTRIC SHOCK
product’s enclosure that may be of sufficient magnitude
DO NOT OPEN
to constitute a risk of electric shock to persons.
CAUTION:
The exclamation point within an equilateral triangle is
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The important note is located on the rear or bottom of the cabinet.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the
authority to operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.
2
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.
LASER SAFETY
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION: Visible and invisible laser radiation when open and interlocks defeated. Do not stare into beam.
LOCATION: Inside, near the deck mechanism.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.
To Avoid the Hazards of Electrical Shock and Fire
• Do not handle the AC power cord with wet hands.
• Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
Location and Handling
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
•
Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Dew Condensation Warning
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
*
Note about Recycling
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
Notice for Progressive Scan Output
• Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 525p(480p) BD/DVD player, please contact our customer service center.
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Contents
INTRODUCTION
FUNCTION SETUP
Safety Instructions ........................................................................2
Supplied Accessories ...................................................................5
Trademark Information...............................................................5
Features ............................................................................................6
Symbols Used in this Manual....................................................6
Front Panel.......................................................................................7
Rear Panel.........................................................................................7
Remote Control..............................................................................8
Using the Setup Menu ..............................................................29
Quick.........................................................................................29
Custom ....................................................................................30
Language ............................................................................31
Video ....................................................................................32
Audio ....................................................................................34
Parental ...............................................................................39
Others ...................................................................................40
Initialize ...................................................................................44
CONNECTIONS
Connection to the TV................................................................ 10
Connection to an Audio System........................................... 12
Finding the Video Channel on Your TV.............................. 13
OTHERS
Troubleshooting..........................................................................45
Glossary ..........................................................................................46
Language Code List....................................................................47
Maintenance.................................................................................49
LIMITED WARRANTY .................................................back cover
PLAYBACK
Information on Playback.......................................................... 14
How to Insert a Disc................................................................... 17
Reading the SD Memory Card ............................................... 17
Selecting the Media Mode...................................................... 18
Playing Back (BD / DVD)........................................................... 19
Playing Back (Audio CD / JPEG Files)................................... 20
Kodak Picture CD........................................................................ 21
Fast Forward / Fast Reverse.................................................... 22
Slow Forward Playback ............................................................ 22
Step by Step Playback .............................................................. 22
Repeat Playback.......................................................................... 22
Program Playback ...................................................................... 23
Random Playback....................................................................... 24
Rapid Playback ............................................................................ 24
Adjusting the Picture ................................................................ 24
Virtual Surround.......................................................................... 25
PIP (BONUSVIEW) Setting........................................................ 25
Camera Angle .............................................................................. 25
Search............................................................................................. 26
Switching Subtitles.................................................................... 27
Switching Audio Soundtrack ................................................. 27
Setting the BD Audio Mode.................................................... 28
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Easy and simple connection to your HDTV via
HDMI
Features
Full high-definition video playback
Connect this unit to your HDTV with one single HDMI (High-
Definition Multimedia Interface) cable. It is recommended to
use a High Speed HDMI Cable for better compatibility. The
high definition video output signal will be transferred to your
HDTV without conversion to analog signals, so you will get
excellent picture and sound quality, completely free from
noise.
Watch movies in the highest picture quality available for your
HDTV. This unit offers full high-definition video playback up to
1080p resolution for an amazing viewing experience. A highly
detailed picture and increased sharpness delivers a more true-
to-life picture.
Upconvert DVD for enhanced picture quality
Your current DVD will look even better than before thanks to
video upconversion. Upconversion will increase the
resolution of standard definition DVD to high definition up to
1080p over an HDMI connection. The picture will be less
jagged and more realistic for a near high-definition
experience.
Thanks to other multiple outputs, you can also easily connect
to your home theater system or amplifier.
HDMI Deep Color
Deep Color reduces the posterization effect of the playback
image. Refer to “HDMI Deep Color” in “Function Setup” on
page 32.
HDMI CEC (Consumer Electronics Control)
Enjoy your content on different kinds of media
This unit supports HDMI CEC, which allows integrated system
control over HDMI and is part of the HDMI standard.
This function may not work properly on some devices.
Full backwards compatibility with DVD, CD and SD card
ensures that you can continue to enjoy your current audio-
video collection. Additionally, you can view JPEG images.
HDMI 1080p24 output (BD only)
Listen to the rich multi-channel surround sound
Multi-channel surround sound, which recognizes real-to-life
sound and makes you feel like you are really there.
This unit is equipped with a feature which can provide the
smooth movement in the playback of film originated material
with the frame rate of 24 frames per second with progressive
scan. (Available only when the TV is connected by an HDMI
cable and compatible with 1080p24 frame input.)
Refer to “HDMI Video Resolution” in “Function Setup” on
page 32.
PIP (BONUSVIEW)
Some BD-videos have the PIP function which enables you to
display the secondary video in the primary video. You can call
up the secondary video by pressing [MODE] whenever the
scene contains the secondary video.
Copyright protection system
To play back the digital video images of a BD / DVD via an
HDMI connection, it is necessary that both the unit and the
TV (or an AV amplifier) support a copyright protection
system called HDCP (high-bandwidth digital content
protection system). HDCP is copy protection technology
that comprises data encryption and authentication of the
connected AV device. This unit supports HDCP. Please read
the operating instructions of your TV (or AV amplifier) for
more information.
Pop-up menu
Some BD-video have pop-up menu which is a navigation
menu that can be called up and be operated on the TV screen
without interrupting the playback. You can call up the pop-up
menu by pressing [POP MENU / MENU]. Contents in the
pop-up menu vary depending on the disc.
Rapid playback
Playback in slightly faster speed while keeping the sound
output.
Rapid playback is available only on discs recorded in the
Dolby Digital format.
Symbols Used in this Manual
To specify for which media type each function is, we put the
Playing back the contents in SD Memory Card
You can play back JPEGs stored in an SD Memory Card.
You can store picture-in-picture commentary, subtitles or
other extras for BD-ROM Profile 1 ver.1.1 files in an SD Memory
Card and play back with the BD-video.
following symbols at the beginning of each item to operate.
Symbol
Description
Description refers to BD-video and BD-RE
(ver.2.1) / BD-R (ver.1.1/1.2/1.3) recorded in
BDMV format
Description refers to DVD-video
Description refers to audio CD / DTS-CD
Description refers to BD-RE/-R, DVD, CD-RW/-R
and SD Memory Card with JPEG files
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Front Panel
1
2*
3 4
5
6* 7 8 9
OPEN/
CLOSE
DISC IN
SD card
10
(*) The unit can also be turned on by pressing these buttons.
1. Disc tray
• Place a disc when opening the disc tray.
2. A OPEN/CLOSE button*
• Press to open or close the disc tray.
3. DISC IN indicator
• This indicator lights up in blue when a disc is in this
unit.
4. Infrared sensor window
• Receive signals from your remote control so that you
can control the unit from a distance.
5. C STOP button
• Press to stop playback.
6. B PLAY button*
7. PLAY indicator
• This indicator lights up in green when discs or SD
card play back.
8. STANDBY-ON indicator
• This indicator lights up in red when the power is in
the standby mode.
9. Q STANDBY-ON button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
• Press and hold for 10 seconds to shut down the unit.
10. SD card slot
• Insert an SD Memory Card and play back the
contents in it.
• Press to start or resume playback.
Rear Panel
3
4
2
1
Y
PR/CR
L
HDMIOUT
PB/CB
COAXIAL
R
DIGITAL OUT
AUDIO
OUT
VIDEO
OUT
COMPONENT
VIDEO OUT
PCM/BITSTREAM
5
6
1. AC power cord
5. DIGITAL OUT (COAXIAL) jack
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
• Use to connect an AV receiver / amplifier, Dolby
Digital / DTS decoder or other device with a digital
audio coaxial input jack with a digital audio RCA
cable.
turn off the unit.
2. HDMI OUT jack
6. VIDEO OUT jack
• Use to connect a TV with an HDMI compatible port
• Use to connect a TV, an AV receiver or other device
with an RCA video cable.
with an HDMI cable.
3. AUDIO OUT jacks
• Use to connect a TV, an AV receiver / amplifier or
other device with an RCA audio cable.
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
4. COMPONENT VIDEO OUT jacks
• Use to connect a TV with component video inputs
with an RCA component video cable.
• This unit does not have the RF modulator.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Remote Control
12. REPEAT button
• Press to toggle between various repeat modes.
13. OPEN/CLOSE A button*
• Press to open or close the disc tray.
14. POP MENU / MENU button
• Press to display the pop-up menu / disc menu.
15. OK button
• Press to confirm or select menu items.
16. RETURN button
• Press to return to the previously displayed menu
screen.
17. D (forward) button
• During playback, press to fast forward the playback.
• In pause mode, press to slow forward the playback.
18. G (skip) button
• During playback, press to skip to the next title,
chapter, track or file.
19. F (pause) button
1
2
13*
14
3
4
5
15
16
17
18
6
7*
8
9
19
• Press to pause playback.
20
21
22
23
• When playback is in pause mode, press repeatedly
to forward the playback step by step.
20. DISPLAY button
10
• Press to display the on-screen display menu.
21. ANGLE button
• Press to access various camera angles on the disc.
• Press to rotate the JPEG files clockwise by 90 degrees.
22. SUBTITLE button
11
12
24
25
• Press to display the subtitle menu.
23. AUDIO button
(*) The unit can also be turned on by pressing these buttons.
• Press to display the audio menu.
24. MODE button
1. STANDBY-ON Q button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
• During BD or DVD playback, press to display the
setting for the rapid playback and the picture
adjustment.
2. RED / GREEN / BLUE / YELLOW button
• During BD, DVD and CD playback, press to display
the setting for the virtual surround.
• Press to select items on some BD menus.
• When file list / thumbnail list is shown, press to
switch between pages.
• During BD playback, press to turn the picture-in-
picture feature on or off (only applicable to BD-video
which supports the PIP function).
3. TOP MENU button
• Press to display the top menu.
4. K / L / s / B buttons
• Press to select items or settings.
5. SETUP button
• Press to display the setup menu.
6. E (reverse) button
• During playback, press to fast reverse the playback.
7. B (play) button*
• Press to start playback or resume playback.
8. H (skip) button
• During the JPEG playback, press to display menus
for changing the visual effect for switching the
image or changing the size of the image.
• In stop mode with BD inserted, press to display a
menu for setting the BD audio mode.
• In stop mode with audio CD or JPEG files inserted, press
to display menus for program and random playback.
25. CLEAR button
• Press to clear the information once entered or to
cancel the programming for audio CD, etc.
• During playback, press once to return to the
beginning of the current title, chapter or track.
• During playback, press twice to return to the
previous title, chapter or track.
• During the JPEG playback, press to return to the
previous file.
9. C (stop) button
• Press to stop playback.
10. Number buttons
• Press to enter the title, chapter, track or file number.
• Press to enter values in the input field.
11. SEARCH button
• Press to display the search menu.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Installing the Batteries in the Remote Control
Using a Remote Control
Install the batteries (AAAx2) matching the polarity
indicated inside battery compartment of the remote
control.
Keep in mind the following when using the remote
control:
• Make sure that there are no obstacles between the
remote control and the infrared sensor window on the
unit.
1) Open the cover.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
2
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
1
- Line of sight: approx. 23 feet (7 m)
e
o
o
-
Either side of the center: approx. 16 feet (5 m) within 30°
- Above: approx. 16 feet (5 m) within 15°
- Below: approx. 10 feet (3 m) within 30°
2) Insert batteries.
OPEN/
CLOSE
DISC IN
SD card
30˚
30˚
16 feet
(5 m)
23 feet
(7 m)
16 feet
(5 m)
Make sure to match + and - on the batteries to the
marks indicated in the battery compartment.
3) Close the cover.
2
1
Note
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the
following:
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the + and - ends of each battery
match the indications in the battery compartment.
• Remove batteries from battery compartment that
are not going to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public rules that apply in your country or area. (Refer
to page 3.)
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connection to the TV
Choose the appropriate connection, then proceed to the corresponding
instruction (A, B or C) on the next page.
1
(Supports up to 1080i / 1080p, 1080p24 resolution.)
Best
Your TV
HDMI IN
Go To
High
Definition
TV
HDMI cable
Video
Audio
A
B
C
No analog audio connection required.
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
High Speed HDMI Cable (also known as HDMI category 2 cable) is recommended for the better compatibility.
(Supports up to 1080i resolution.)
Better
COMPONENT
VIDEO IN
Y
PB/CB
RCA component video cable
Your TV
High
Video
Go To
PR/CR
Definition
TV
+
L
RCA audio cable
Audio
AUDIO IN
R
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
(Supports only 480i resolution.)
Basic
VIDEO IN
RCA video cable
Your TV
Video
Go To
Standard
Definition
TV
L
+
RCA audio cable
AUDIO IN
R
Audio
• Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be distorted
due to the copy right protection system.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x1
• RCA video cable x1
10
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connect the cables by following the descriptions below.
2
HDMI Video / Audio Connection
Your TV
9
0
2ꢀ#2
"ꢀ#"
,
A
($-)/54
0
#/!8)!,
2
$)')4!, /54
!5$)/
/54
6)$%/
/54
#/-0/.%.4
6)$%/ /54
0#-ꢀ")4342%!-
HDMI IN
HDMI cable
Note
• Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the
connector are matched.
• When using HDCP-incompatible TV, the image will not be viewed properly.
Not displayed the picture on the TV screen ...
The indicators blink under the following conditions.
• When the connected device does not support HDCP.
• When the connected device is recognized as an HDCP incompatible by HDMI SRM.
• When the connected device supports HDCP but cannot be recognized as an HDCP compatible for some reason.
The indicators blink as follows for 30 seconds.
DISC IN
Component Video + Standard Audio Connection
Your TV
9
02ꢀ#2
,
($-)/54
0"ꢀ#"
#/!8)!,
2
B
$)')4!, /54
!5$)/
/54
6)$%/
/54
#/-0/.%.4
6)$%/ /54
0#-ꢀ")4342%!-
RCA
component
video cable
COMPONENT
VIDEO IN
Y
Y
P
R/CR
B/CB
L
PR/CR
PB/CB
L
P
AUDIO IN
R
R
AUDIO
OUT
COMPONENT
VIDEO OUT
RCA audio cable
Standard Video + Standard Audio Connection
Your TV
C
9
0
2ꢀ#2
"ꢀ#"
,
($-)/54
0
#/!8)!,
2
$)')4!, /54
!5$)/
/54
6)$%/
/54
#/-0/.%.4
6)$%/ /54
0#-ꢀ")4342%!-
L
L
VIDEO IN
AUDIO IN
RCA video cable
RCA audio cable
R
R
AUDIO
OUT
VIDEO
OUT
EN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connection to an Audio System
• When you change the connections, all devices should be turned off.
• Refer to the manual accompanying external devices for more information.
2-Channel Analog Audio Connection
stereo system
Digital Audio Connection
AV receiver / amplifier
audio
AUDIO IN
R
L
DIGITAL AUDIO INPUT
COAXIAL
digital audio coaxial
input jack
Analog audio input jacks
digital audio
RCA cable
RCA audio cable
L
this unit
Y
Y
P
R
B
L
L
HDMIOUT
HDMIOUT
P
COAXIAL
R
COAXIAL
R
COAXIAL
DIGITAL OUT
AUDIO
OUT
VIDEO
OUT
DIGITAL OUT
AUDIO
OUT
VIDEO
OUT
COMP
VIDE
PCM/BITSTREAM
PCM/BITSTREAM
DIGITAL OUT
PCM/BITSTREAM
R
AUDIO
OUT
AUDIO OUT
DIGITAL OUT (COAXIAL)
To set up “Digital Out”, refer to page 36.
HDMI Audio Connection
audio
AV receiver / amplifier with an HDMI input jack
this unit
HDMI IN
Y
P
R/CR
B/CB
HDMI cable
L
HDMIOUT
P
COAXIAL
R
DIGITAL OUT
AUDIO
OUT
VIDEO
OUT
COMPONENT
VIDEO OUT
PCM/BITSTREAM
To set up “HDMI Audio Out”, refer to pages 35 and 34.
Supplied cables used in this connections are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
12
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
After you have completed all the connections, you must find the correct video channel (external input channel) on your TV.
Finding the Video Channel on Your TV
After you have made all the necessary connections, press [STANDBY-ON Q] to turn
on the unit.
1
Turn on your TV.
2
3
Press the button on the TV’s remote control that accesses the external input
channel. It may be labeled “SOURCE”, “AV” or “SELECT” (refer to your TV’s user
manual).
Note
• If the TV is connected by an HDMI cable, it may take a while for the opening picture to come up.
EN
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
Information on Playback
Before you start playing back a disc, read the following information.
Readable cards
Playable files / data
Playable Discs and Files
SD Memory Card (8 MB - 2 GB)
SDHC Memory Card (4 GB - 8 GB)
miniSD Card (8 MB - 2 GB)
JPEG, picture-in-picture
commentary, subtitles or
other extras for BD-ROM
Profile 1 ver.1.1
This unit is compatible to play back the following discs / files.
To play back a disc / file, make sure that it meets the
requirements for region codes and color systems as
described below. You can play back discs that have the
following logos.
microSD Card (8 MB - 2 GB)
Other disc types are not guaranteed to play back.
Note for SD Memory Cards
• This unit supports SD Memory Card with FAT12/
FAT16 file system, and SDHC Memory Card with
FAT32 file system.
Playable discs
Logos
Blu-ray Disc
• This unit does not support NTFS file system.
• This unit may not read the SD Memory Cards
formatted on a computer. If that is the case, please
reformat the SD Memory Cards in this unit and try
again.
- BD-video (single / dual layer)
- BD-RE ver. 2.1 (single / dual layer)
(Recorded in BDMV format)
- BD-R ver. 1.1 / 1.2 / 1.3 (single / dual
layer) (Recorded in BDMV format)
(Unclosed discs may not be played
back.)
• This unit does not support miniSDHC and microSDHC
Memory Card.
• For miniSD Card and microSD Card, the adapter is
necessary.
DVD-video
DVD-RW
miniSD Card
microSD Card
adapter
adapter
miniSD Card
microSD
Card
• Portions of this product are protected under
copyright law and are provided under license by
ARIS / SOLANA / 4C.
DVD-R
• Please keep the SD Memory Cards in their cases when
you are not using them.
CD-DA (audio CD)
CD-RW
• Do not try to open or modify the card.
• Do not touch the terminal surface with your fingers or
any metals.
• Do not attach additional labels or stickers to cards.
• Do not remove the label of the SD Memory Cards.
• This unit recognizes up to 8 characters of file name in
the SD Memory Card. Characters after 8th will not be
displayed.
CD-R
Kodak Picture CD
DTS-CD
Unplayable Discs and Files
The following discs will not be played back in this unit.
• CD-ROM
• DVD-RAM
• DVD-audio
• HD DVD
• CD-I (compact disc-interactive)
• VSD (video single disc)
• Video CD
-
• SVCD
Playable files
Media
• Unfinalized disc
• BD-RE (ver.1.0)
BD-RE/-R, DVD, CD-RW/-R,
SD Memory Card (including SDHC),
miniSD Card, microSD Card
JPEG
• BD-RE (ver.2.1) (Recorded in BDAV format)
• BD-R (ver.1.1 / 1.2 / 1.3) (Recorded in BDAV format)
• DVD / CD / SD Memory Card contains MP3, Windows
Media™ Audio and DivX® files.
• DVD-RW/-R recorded in non compatible recording
format.
• Super Audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density Super Audio CD
layer cannot be heard.
• Playability of dual discs are not guaranteed.
14
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
Color Systems
On-Screen Display
BD-video and DVD-video are recorded in different color
systems throughout the world. The most common color
system is NTSC (which is used primarily in the United
States and Canada).
This unit employs NTSC color system, so the disc you play
back must be recorded in the NTSC system. You cannot
play back the disc recorded in other color systems.
You can check information about the current disc by
pressing [DISPLAY].
To call the on-screen display menu, press [DISPLAY]
during playback. Every time you press [DISPLAY], the
information changes. Depending on the media, available
information varies.
Region Codes
off A Title / Chapter information
A Title information (elapsed time)
A Title information (remaining time)
A Audio format information A off
BD-video
This unit has been designed to play back
BD-video with region “A” and DVD-video
with region “1” or “ALL”. You cannot play
back BD-video or DVD-video that are
labeled for other regions. Look for the
symbols on the right on your BD-video or
DVD-video.
If these region symbols do not appear on
your BD-video or DVD-video, you cannot
play back the disc in this unit. The letter or
number inside the globe refers to region
of the world. A BD-video or DVD-video
labeled for a specific region can only be
played back in the unit with the same
region code.
DVD-video
off A Chapter information (elapsed time)
A Chapter information (remaining time)
A Title information (elapsed time)
A Title information (remaining time)
A Audio format information A off
Track information (elapsed time)
A Track information (remaining time)
A Disc information* (elapsed time)
A Disc information* (remaining time)
A Track information (elapsed time)
(* not available during program / random playback)
Structure of Disc / SD Memory Card Contents
The contents of BD / DVD are generally divided into titles.
Titles may be further subdivided into chapters.
BD / DVD
title 1
chapter 1
title 2
chapter 2 chapter 1 chapter 2 chapter 3
off A File information A File name information A off
audio CD are divided into tracks.
audio CD
track 1
track 2
track 3
track 4
track 5
Data discs or SD Memory Cards containing JPEG are
divided into folders, and the folders are subdivided into
files.
JPEG
folder (group) 2
file 4
folder (group) 1
file 1
file 2
file 3
file 5
EN
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
S Chapter information
S Track / File information
<Title / Chapter information for BD>
1
2
3
4
1
2
3
4
5
1 / 14
0 : 00: 51
SD
G
1
1/10
T
1
2
Current track (file) number / Total number of track
(file)
Elapsed time / Remaining time of the current track
(except for JPEG files)
<Chapter information for DVD>
2
6
3
4
Indication of SD Memory Card playback
Current repeat setting
3 / 5
0 : 01 : 02
(Only when repeat setting is active)
(T: Track repeat, G: Group repeat,
A: All repeat)
1
2
3
Current title number
Current chapter number / Total number of chapters
Current repeat setting (Only when repeat setting is
active)
(C: Chapter repeat, T: Title repeat)
Indicates that the multi camera angle images are
available on the scene
Current playback status
S Disc information
1
2
4
1 / 14
0 : 00: 51
T
5
6
1
2
Current track number / Total number of tracks
Elapsed time / Remaining time of the current disc
Elapsed time / Remaining time of the current chapter
S Title information
S File name information
1
2
1
3 / 5
0 : 01 : 02
File_name_001
1
2
Current title number / Total number of titles
Elapsed time / Remaining time of the current title
1
Media icon and file name
: JPEG file
S Audio format information
1
Dolby Digital
1
Audio format
16
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
Use [K / L] to select “SD Card”,
How to Insert a Disc
then press [OK].
2
Press [OPEN/CLOSE A] to open the
disc tray.
1
2
Media Select
Disc
SD Card
Place the disc on the disc tray with its
label side facing up.
Align the disc to the
disc tray guide.
Use [K / L] to select a desired track,
folder or file, then press [OK].
3
Use [s / B] to go back and forward
between the hierarchies.
• If you press [OK] on the desired file,
playback will start.
• Make sure the disc is compatible with this unit.
(Refer to page 14 for the list of compatible discs.)
Press [OPEN/CLOSE A] to close the
To remove the SD Memory Card:
In stop mode, gently push in the SD Memory
Card, then pull it out slowly.
disc tray.
3
It may take a while to load the disc.
Note
• The “Media Select” screen will disappear under the
To eject the disc:
conditions listed below:
Press [OPEN/CLOSE A] to open the disc tray.
Remove the disc.
- when the screen saver is activated.
- when [RETURN] is pressed.
- when the setup menu is called up.
Press [OPEN/CLOSE A] to close the disc tray.
• If the “Media Select” screen disappears before you
make the selection, refer to “Selecting the Media
Mode” on page 18.
Reading the SD Memory Card
• Do not remove the SD Memory Card or turn the unit
to the standby mode while the contents of the card
are in playback. It may result in malfunction or loss of
the card’s data.
• Do not delete the folders or files in the SD Memory
Card with your computer. This unit may not read the
SD Memory Cards formatted on a computer.
You can play back the JPEG files in an SD Memory Card.
With the SD Memory Card, you can also enjoy the special
additional contents for BD-ROM Profile 1 ver.1.1 which can
be downloaded from the Internet. You can store the
contents on an SD Memory Card via computer and play
them back with the BD-video. For more information about
the special additional contents, please refer to the
instruction book that came with the disc.
Insert an SD Memory Card, with the
label side facing up, into the SD
1
card slot until it clicks.
If no disc is in operation, “Media Select” screen
will appear on the TV screen.
OPEN/
CLOSE
DISC IN
STANDBY-ON
SD card
STANDBY-ON
SD d
SD Memory Card
EN
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
Selecting the Media Mode
For the playback media to be read by this unit, the correct media mode should be selected. You can switch the media
mode by following the steps below. “Media Select” is available only when an SD Memory Card is inserted.
is
e
hen
SD
y
In stop mode, press [SETUP].
is
1
2
Use [K / L] to select , then press
[OK] .
Quick
Media Select
Disc
HDMI Audio Out
HDMI Multi(Normal)
HDMI Video Resolution Auto
Component Output
Player Menu
480i
English
Use [K
/
L
] to select “Media Select”.
3
Quick
Media Select
Disc
HDMI Audio Out
HDMI Multi(Normal)
HDMI Video Resolution Auto
Component Output
Player Menu
480i
English
Press [OK] repeatedly to select the
desired media.
4
5
Press [SETUP] to exit.
• Selected media mode is now activated.
Even if you turn the unit to the standby mode in “SD Card”
mode, it will be in “Disc” mode the next time you turn it on.
18
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
Playing Back (BD / DVD)
Press [STANDBY-ON Q].
1
2
3
4
Turn on the TV and select the
appropriate input on the TV to
which the unit is connected.
Insert a disc (refer to page 17 on how
to insert a disc).
Playback may start automatically.
If not, press [B (play)].
Some discs may show a title or a disc menu.
In such case, refer to “Using the Title / Disc /
Pop-up Menu” on page 20.
To pause playback:
Press [F (pause)].
To return to the normal playback:
Press [B (play)].
To stop playback:
Press [C (stop)].
Playback will be in Resume-On-Stop mode.
Resume-On-Stop mode
If a playback is in Resume-On-Stop mode, when you press
[B (play)] next time, the playback will start from the point
where it has been stopped.
Note
• Resume playback may not be available for the BD that
supports Java applications (BD-Java).
• In the “Disc” mode, the resume information will be
cleared when;
- [C (stop)] is pressed while in the Resume-On-Stop
mode.
- the parental level is changed.
- the disc tray is opened.
• In the “SD Card” mode, the resume information will be
cleared when;
- [C (stop)] is pressed while in the Resume-On-Stop
mode.
- the SD Memory Card is removed.
- the unit is turned into the standby mode.
Note
•
may appear at the top-right on the TV screen
when the operation is prohibited by the disc or this
unit.
• During the playback of 2-layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• The operation may vary when you play back BD-
video and DVD-video with disc menu. Refer to the
manual accompanying the disc for details.
• Set “Still Mode” setting to “Field” in “Video” menu if
pictures in the pause mode are blurred. Refer to “Still
Mode” on page 33.
EN
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
Playing Back (Audio CD / JPEG Files)
Using the Title / Disc / Pop-up Menu
Before you begin, make sure the correct media mode is
Many of BD-video and DVD-video discs contain title menu
(BD-video / DVD-video), disc menu (DVD-video) or pop-up
menu (BD-video) which guides you through the available
functions in the disc. The contents of the menus may differ
depending on the discs.
selected. Refer to “Selecting the Media Mode” on page 18.
Insert an audio CD or a disc/card
with JPEG files.
1
2
Title menu (BD-video / DVD-video)
1 Press [TOP MENU].
Use [K / L] to select a desired track,
folder or file, then press [OK].
2 Use [K / L / s / B] to select an item, then press
Use [s / B] to go back and forward
[OK].
between the hierarchies (only for
3 Press [TOP MENU] to exit.
JPEG files).
• If you press [OK] on the desired file, playback
Disc menu (DVD-video)
will start.
1 Press [POP MENU / MENU].
1
2
3
5
6
4
2 Use [K / L / s / B] to select an item, then press
[OK].
- - / 20
3 Press [POP MENU / MENU] to exit.
File List
JPEG_DISC
Folder_1
Folder_2
Folder_3
JPEG_A
JPEG_B
JPEG_C
JPEG_D
Pop-up menu (BD-video)
• This is a special feature available for some BD-videos.
When you press [POP MENU / MENU], a menu pops
out on the TV screen during play back.
1 During the playback of BD-video, press
[POP MENU / MENU].
Page Up
Page Down
2 Use [K / L / s / B] to select an item, then press
[OK].
e.g.) JPEG
3 Press [POP MENU / MENU] to exit.
1
2
audio CD : Track information
JPEG : File information
audio CD : “CD-DA” will be displayed.
Note
• Contents of menus and corresponding menu
operations may vary among discs. Refer to the
manual accompanying the disc for details.
JPEG
: Current Disc, SD Memory Card, or
folder name will be displayed.
3
4
audio CD : List of the track number and time.
JPEG : List of the file / folder names in the
current folder / disc
Operation: Press [RED] to go to the previous page.
guide Press [GREEN] to go to the next page.
5
6
Current page / Total page number
Playback status
Icons:
: Folder
: audio CD tracks
: JPEG files
Press [C (stop)] to stop playback.
3
20
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
It is recommended that files to be played back in this
1
2
3
File information
Current page / Total page number
Operation guide: Press [BLUE] to go to the previous
unit are recorded under the following specifications:
<JPEG>
• Upper limit
: 2,560 x 1,900 dots (sub sampling is
4:4:4)
page.
5,120 x 3,840 dots (sub sampling is
up to 4:2:2)
Press [YELLOW] to go to the next
page.
4
• Lower limit
: 32 x 32 dots
Playback status
• File size of image : 12 MB
maximum
Use [K / L / s / B] to select a
desired file to be played back, then
2
Note
press [B (play)] or [OK].
• Do not delete the folders or files in the SD Memory
Card with your computer. This unit may not read the
SD Memory Cards formatted on a computer.
• With regard to the multi-border BD-RE/-R,
additionally recorded sections cannot be
recognized.
• An image will be played back from the
selected file and go to the next one in turn.
Press [C (stop)] to stop playback.
To return to the first item:
Press [TOP MENU].
3
• With regard to the multi-border DVD-RW/-R,
additionally recorded sections may not be
recognized.
To return to the file played last:
Press [POP MENU / MENU].
Tips for JPEG / Kodak Picture CD Playback
Kodak Picture CD
• Every press on [ANGLE] will turn the image
clockwise by 90 degrees when an image is displayed.
• To change the visual effect for switching the
playback image, press [MODE] once, then use
[s / B] or [OK] to switch between “Cut In/Out” and
“Fade In/Out”.
This unit can also run JPEG files stored on Kodak Picture
CD. You can enjoy picture images on the TV set by playing
back the Kodak Picture CD. This unit conforms to ver.7.0 of
Kodak Picture CD. For details of Kodak Picture CD, contact
a shop that provides developing service of Kodak Inc.
• During JPEG / Kodak Picture CD playback, press
[MODE] twice to change the size of the playback
image, then use [s / B] or [OK] to switch between
“Normal” (100 %) and “Small” (95 %). The size change
may have no effect on some files (e.g. files with a
small picture size).
When Kodak Picture CD is inserted
in this unit, Kodak Picture CD menu
1
will appear automatically on the TV
screen.
Note
1
4
• Unrecognizable characters will be replaced with
asterisks.
- - / 16
• Some unplayable folders or files may be listed due to
the recording status.
Thumbnail
Pictures
• High-resolution JPEG files take longer to be
displayed.
• Progressive JPEG files (JPEG files saved in progressive
format) cannot be played back in this unit.
• The system can recognize up to 255 folders / 999 files
for CD, 999 folders / 9,999 files for DVD and SD
Memory Card.
• The 9th and deeper hierarchies cannot be displayed
for CD. The 10th and deeper hierarchies cannot be
displayed for DVD and SD Memory Card.
• For the SD Memory Card playback, refer to “Reading
the SD Memory Card” on page 17.
㪉㩷 㩷 㪆㩷 㩷 㪊
Page Prev
Page Next
2
3
• For an SD Memory Card, only an extension of “.jpg”
can be recognized. For other media, only “.jpg” and
“.jpeg” can be recognized, and any other extensions
cannot be read.
EN
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
Fast Forward / Fast Reverse
Step by Step Playback
1 During playback, press [D (forward)]
1 In pause mode, press [F (pause)] repeatedly.
repeatedly for fast forward.
Every time you press [F (pause)], playback will
During playback, press [E (reverse)] repeatedly
for fast reverse.
Every time you press [D (forward)] or
[E (reverse)], the playback speed will change.
advance one step at a time.
2 Press [B (play)] to return to normal playback.
Note
2 Press [B (play)] to return to normal playback.
• Only step by step forward is available.
• Set “Still Mode” setting to “Field” in “Video” menu if
pictures in step by step playback mode are blurred.
Refer to “Still Mode” on page 33.
Note
• For BD, the approximate speed for the fast forward is
1 (1.3x), 2 (10x), 3 (30x), 4 (70x), and 5 (200x). And for
the fast reverse, it is 1 (2x), 2 (10x), 3 (30x), 4 (70x),
and 5 (200x).
Repeat Playback
Available repeat functions vary depending the discs.
1 During playback, press [REPEAT] repeatedly to
select the desired repeat mode.
• For DVD, the approximate speed for the fast forward
or reverse playback is 1 (2x), 2 (8x), 3 (20x),
4 (50x), and 5 (100x).
• For audio CD, the approximate speed is 1 (2x), 2 (8x),
and 3 (30x).
• For audio CD, fast forward / fast reverse search
between different tracks are not available during
program and random playback.
Repeat mode
Chapter repeat
Available media
The current chapter will be played
back repeatedly.
Title repeat
Slow Forward Playback
The current title will be played back
repeatedly.
Track repeat
The current track will be played back
repeatedly.
Group repeat
The current folder will be played
back repeatedly.
1 During playback, press [F (pause)], then press
[D (forward)].
Every time you press [D (forward)], playback
speed will change.
2 Press [B (play)] to return to normal playback.
All repeat
All tracks or files in the media will be
played back repeatedly.
Note
• The approximate speed for the slow forward
playback is 1 (1/16x), 2 (1/8x), 3 (1/2x).
• Only slow forward is available.
Note
• Set “Still Mode” setting to “Field” in “Video” menu if
pictures in the slow forward playback mode are
blurred. Refer to “Still Mode” on page 33.
• The repeat setting will be canceled when you stop
playback.
• The chapter, title, track or group repeat will be
cleared when moving to another chapter, title, track /
file or folder.
• Chapter and title repeat are not available with some
scenes.
22
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
3 Press [B (play)] to start program playback.
Program Playback
• The program playback will start.
efore
ou
begin
2 / 16
Program
CD_DA
0 : 01 : 05
You can play back the disc/card in your desired order.
Total
0 : 26 : 24
1 In stop mode, press [MODE].
2
4
1:14
2 Use [K / L] to select a track / file, then press
0:50
1:14
0:50
0:53
0:54
0:36
[OK].
9
11
12
14
8
1
2
3
4
5
6
- - / 16
ꢀꢁꢁꢂꢁꢁꢃ
Program
CD_DA
Total
0 : 26 : 24
Page Down
8
9
0:36
2
4
9
1:14
To exit from the program playback mode:
1:14
0:45
0:50
0:53
0:20
0:54
0:50
1:14
0:50
0:53
0:54
0:36
10
11
12
13
14
• Press [RETURN] in stop mode.
11
12
14
8
Note
• During program playback, press [C (stop)] once to
set the resume point, and then press [B (play)] to
resume program playback from where [C (stop)]
was pressed (audio CD) or from beginning of the file
where [C (stop)] was pressed (JPEG).
ꢀꢁꢁꢂꢁꢁꢃ
ꢀꢁꢁꢂꢁꢁꢃ
7
8
Page Up
Page Down
Page Prev
Page Next
e.g.) audio CD
• During program playback, press [C (stop)] twice to
display the program screen. To go back to the
normal program playback, press [RETURN] to exit
from the program screen, then press [B (play)].
• Up to 99 tracks / files can be entered.
1
2
audio CD
JPEG
audio CD
JPEG
: Track information
: File information
: “CD-DA” will be displayed.
: Current Disc, SD Memory Card,
or folder name will be displayed.
• To repeat the current track / file in the program,
3
4
5
press [REPEAT] repeatedly until “
Track”
Track / File list : Track / File list in the original
order.
Programmed list : Track / File list in the
programmed order.
Cumulative playback time of all tracks / files in the
programmed list.
Playback status
appears during playback. To repeat the entire
program, press [REPEAT] repeatedly until “
All”
appears during playback.
• Playback from a desired track / file and random
playback are not available during program playback.
• Press [MODE] to switch to the random playback mode.
• The program will be cleared when;
6
7
- the unit is turned into the standby mode.
Current page / Total page number
- the media mode is switched to the other mode.
- the disc / card is removed. (as for “Disc” mode, just
opening the disc tray will clear the program info.)
8
Operation Guide: Press [RED] to go to the previous
page in the track / file list.
Press [GREEN] to go to the next
page in the track / file list.
Press [BLUE] to go to the
previous page in the
programmed list.
Press [YELLOW] to go to the next
page in the programmed list.
• For JPEG files, use [K / L] to select a folder, then press
[OK] first, and then use [K / L] to select a file, then
press [OK].
• Press [CLEAR] to erase the last file of the program.
• Use [K / L] to select “All Clear” at the bottom of the
list to erase all the tracks / files in the program.
• The programmed tracks / files is displayed in the right
hand screen.
• Use [s / B] to go back / forward between the
hierarchy of folders.
EN
23
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
Random Playback
Rapid Playback
This function shuffles the playback order of tracks / files.
1 In stop mode, press [MODE] twice.
This function plays back approximately at 1.3 times the
normal playback while keeping the sound output. This
function is available only on discs recorded in the Dolby
Digital format.
1
2
3
4
5
6
- - / 16
1 During playback, press [MODE] repeatedly
Random
CD_DA
Total
1 : 13 : 29
until the Rapid playback setting appears.
Off
1
2
3
4
5
6
7
0:36
1:14
0:45
0:50
0:53
0:20
0:54
2 Press [OK] or [s / B] to switch
“Off” : Plays back in normal speed.
(1.3x), or off.
: Plays back approximately at 1.3 times of normal
playback.
“
”
ꢀꢁꢁꢂꢁꢁꢃ
Page Down
3 Press [B] to return to normal playback.
e.g.) audio CD
1
2
audio CD
: Track information
: File information
: “CD-DA” will be displayed.
: Current Disc, SD Memory Card, or
folder name will be displayed.
Note
JPEG
• Picture adjustment and audio language setting
cannot be changed during this function.
audio CD
JPEG
• Virtual surround does not work during this function.
• This function may not work at some points on a disc.
• During this function, 2ch LPCM will be output from
HDMI OUT jack and DIGITAL OUT jack.
3
4
Track / File list : Track / File list in the original order
will be displayed.
Operation
Guide
: Press [RED] to go to the previous
page in the track / file list.
Press [GREEN] to go to the next
page in the track / file list.
Adjusting the Picture
5
6
You can adjust the picture quality.
Total playback time of all tracks / files.
Playback status
1 During playback, press [MODE] repeatedly
until
appears.
2 Press [B (play)] to start random playback.
To exit from the random playback mode:
• Press [MODE] in stop mode.
2 Use [K / L] to select your desired item, then
use [s / B] to adjust the setting.
Black Level
On
Off
Note
Noise Reduction
• During the random playback, press [C (stop)] once
to set the resume point, and then press [B (play)] to
resume random playback from where [C (stop)] was
pressed (audio CD) or from beginning of the file
where [C (stop)] was pressed (JPEG).
e.g.) DVD-video
S Black level
You can adjust the black level setting to make the black
parts of the pictures as bright as you prefer. You can select
“On” or “Off”.
• To repeat the current track / file in the random
selection, press [REPEAT] repeatedly until
“
Track” appears during playback. To repeat the
entire random selection press [REPEAT] repeatedly
until “ All” appears during playback.
“On” :Makes the dark parts brighter.
“Off” :Shows the original picture as recorded.
• Playback from a desired track / file is not available
during random playback.
• Press [RETURN] to switch to the program playback
mode.
24
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
S Noise reduction (DVD-video only)
PIP (BONUSVIEW) Setting
Reduces the noise of the playback picture.
“Off” :Shows the original picture as recorded.
“1” :Executes 3D noise reduction which detects and
deletes the noise by comparing each picture
frames.
“2” :Executes MPEG noise reduction which reduces
the block noise and mosquito noise on the
subtitle on movie.
Some BD-video have the PIP function which enables you
to display the secondary video in the primary video. You
can call up the secondary video by pressing [MODE]
whenever the scene contains the secondary video.
“3” :Executes both MPEG noise reduction and 3D
noise reduction.
3 Press [RETURN] to exit.
primary
video
Note
• The setting will remain the same even if the unit is
turned to the standby mode.
secondary
video
• For the picture output from HDMI OUT jack, “Black
Level” is not effective.
• You cannot adjust the setting during rapid playback.
1 During playback, press [MODE] repeatedly
until the PIP function appears.
2 Use [K / L] to select the secondary video you
Virtual Surround
want.
• The secondary video will be displayed and the
secondary audio will be output.
You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.
3 Press [RETURN] or [MODE] to remove the PIP
information.
1 During playback, press [MODE].
2 Use [K / L] to select your desired setting.
Note
• The secondary audio will not be output when the
secondary audio is set to “Off” or when “BD Audio
Mode” is set to “HD Audio Output”. Refer to
“Switching Audio Soundtrack” on page 27 and
“Setting the BD Audio Mode” on page 28.
Off
“Off” :No surround effect
“1” :Natural surround effect
“2” :Stronger surround effect
3 Press [RETURN] to exit.
Camera Angle
Note
• Set the virtual surround setting to “Off” or lower the
volume if the sound is distorted.
• Virtual surround does not function during rapid
playback.
Some BD-video and DVD-video contain scenes which have
been shot simultaneously from various angles. You can
change the camera angle when
screen.
• For the virtual surround, audio signal will always be
2-channel LPCM.
appears on the TV
1 During playback, press [ANGLE].
• The selected angle will be displayed on the display
bar at the top of the TV screen.
2 Use [K / L] to select your desired angle.
1 / 3
Note
• If “Angle Icon” setting is “Off” in “Others” menu,
will not appear. Refer to page 40.
EN
25
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
Using [Number buttons] (Direct Search)
Search
Title Search
Using [H / G (skip)]
1) In stop mode, enter the title number you want to
search using [Number buttons].
1 During playback, press [G (skip)] to move to
Playback of the title will start in a few seconds.
the next track / title / chapter / file. Press it
repeatedly to skip to subsequent tracks. Press
[H (skip)] once to go back to the beginning of
the current track. Press it repeatedly to go to
the previous tracks.
Chapter Search
1) During playback of a title, enter the chapter number
you want to search using [Number buttons].
Playback of the chapter will start in a few seconds.
• For JPEG files, press [H (skip)] to go back to the
previous file.
Note
• As for the BD-video, how it performs will be strongly
determined by the disc, and may not perform as
described here.
Note
• For BD and DVD, if title contains no chapters,
[H / G (skip)] changes the title.
• For JPEG files, [s / B] is also available.
Using [SEARCH]
By using [SEARCH], you can select the following search
modes.
Search mode
Available media
/
Chapter / Title search
Track search
Time search
1 During playback, press [SEARCH] repeatedly
until your desired search mode appears.
2 Enter the desired chapter, title, track, file
number or time to search for using
[Number buttons].
• Chapter, title, track or time search will start.
• Press [CLEAR] to erase an incorrect input.
Note
• During program and random playback, search
functions are not available except the search using
[H / G (skip)].
• Time search is available only in the same track, file or
title.
• For BD, chapter and time search are available only
during playback.
26
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.
Switching Subtitles
Switching Audio Soundtrack
Some BD and DVD may have subtitles in 1 or more
languages. For commercially available discs, the
supported languages can be found on the disc case.
Follow the steps below to switch the subtitle languages
during playback.
Some BD and DVD contain multiple audio streams. Those
are often in different audio languages or audio formats.
For BD, available audio varies depending on “BD Audio
Mode” setting. Refer to page 34 for more information.
1 During playback, press [SUBTITLE].
2 Use [K / L] to select “Primary Subtitle”,
“Secondary Subtitle” or “Subtitle Style”, then
press [OK].
1 During playback, press [AUDIO].
2 Use [K / L] to select “Primary” or “Secondary”
audio to set, then press [OK].
Primary
1
ENG
Secondary
ENG
Dolby D
Multi-ch
Multi-ch
/3
/3
Primary Subtitle
Secondary Subtitle
Subtitle Style
2 ENG/11
2 ENG/11
2/25
2
Dolby D+
“Primary”
: Sets the audio for the primary video.
“Primary Subtitle”
: Sets the subtitle for the
primary video.
“Secondary” : Sets the audio for the secondary video.
3 Use [K / L] to select your desired audio stream
“Secondary Subtitle” : Sets the subtitle for the
secondary video.
channel.
“Subtitle Style”
: Sets style of the subtitle.
• For “Secondary”, use [s / B] to switch between
current audio setting and “Off”.
4 Press [AUDIO] to exit.
3 Use [K / L] to select your desired subtitle or
style.
• Use [s / B] to switch between current subtitle
setting and “Off”.
4 Press [SUBTITLE] to exit.
1 During playback, press [AUDIO].
2 Use [K / L] to select your desired audio stream
channel.
1 During playback, press [SUBTITLE].
2 Use [K / L] to select your desired subtitle.
1
ENG
Dolby D 3/2.1ch
48k
/ 3
e.g.) DVD-video
• For audio CD, you can select following options.
1
/ 4
ENG
“Stereo” : Both right and left channels are active
• Use [s / B] to switch between current subtitle
(stereo).
setting and “Off”.
“L-ch” : Only left channel is active.
“R-ch” : Only right channel is active.
3 Press [AUDIO] to exit.
3 Press [SUBTITLE] to exit.
Note
• Some discs will only allow you to change the
subtitles from the disc menu or pop-up menu. Press
[TOP MENU] or [POP MENU / MENU] to display the
disc menu or pop-up menu.
• If 4-digit-language code appears in the subtitle
menu, refer to “Language Code List” on page 47.
• If the disc has no subtitle language or subtitle style,
“Not Available” will be displayed on the TV screen.
• During playback of the secondary video, the primary
subtitle setting is not available except when there is
no subtitle for the secondary video.
• If you select a language that has a 3-letter-language
code, the code will be displayed every time you
change the subtitle language setting. If you select
any other languages, “---” will be displayed instead.
(Refer to page 47.)
EN
27
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
Setting the BD Audio Mode
Note
• The secondary audio will not be output when the
secondary video is not displayed or when “BD Audio
Mode” is set to “HD Audio Output”. (For some BD,
secondary audio will be output even when
secondary video is off.)
There are 2 options for the “BD Audio Mode” setting; either
by setting the output to the secondary and interactive
audio accompanied by the primary audio or by setting
only the primary audio. Depending on the setting of the
mode, Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS, or DTS-HD output changes between multi LPCM and
bitstream.
• The sound mode cannot be changed during
playback of discs not recorded in multiple audio.
• Some discs allow changing the audio language
setting on the disc menu. (Operation varies
depending on the discs. Refer to the manual
accompanying the disc.)
• [AUDIO] may not work on some discs with multiple
audio streams or channels (e.g. DVDs that allow
changing audio setting on the disc menu).
• If you select a language that has a 3-letter-language
code, the code will be displayed every time you
change the audio language setting. If you select any
other languages, “---” will be displayed instead.
(Refer to page 47.)
1 In stop mode with BD inserted, press [MODE].
2 Use [K / L] to select your desired setting.
BD Audio Mode
Mix Audio Output
“Mix Audio Output”:
If it is available, BD-video’s secondary and interactive
audio will be output with the primary audio.
• The secondary audio is the audio for the secondary
video (Director’s comment etc.) and the interactive
audio is the audio for the interactive application
(Button click sounds etc.).
• Audio Language selection cannot be made during
rapid playback. (Refer to page 24.)
• If 4-digit-language code appears in the subtitle
menu, refer to page 47.
• If the disc has no audio language, “Not Available” will
be displayed on the TV screen.
• For DTS-CD (5.1 music disc), selecting audio streams
or channels is not available.
“HD Audio Output”:
Only the primary audio will be output. Set this mode in
order to output , Dolby Digital Plus, Dolby TrueHD, or
DTS-HD audio of BD through HDMI connection.
3 Press [RETURN] to exit.
• You can also set “BD Audio Mode” from the setup
menu. Refer to page 34.
• Refer to “Audio signals output from HDMI OUT jack”
on page 35 and “Audio signals output from DIGITAL
OUT (COAXIAL) jack” on page 36 for how BD Audio
will be output.
Note
• In “Mix Audio Output” mode, if there is no secondary
and interactive audio, the audio will be output as
“HD Audio Output” mode.
28
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
Using the Setup Menu
In the setup menu you can change the setting for audio,
video, language, etc. You cannot change the setting
during playback.
Setting items displayed in gray indicates they are not
available under the conditions at the time.
Quick
“
“
Quick” menu contains setting items extracted from
Custom” menu which may be used frequently.
In stop mode, press [SETUP].
1
2
3
Use [K / L] to select , then press
[OK].
Use [K / L] to select your desired
setting items.
Quick
Media Select
Disc
HDMI Multi(Normal)
Auto
HDMI Audio Out
HDMI Video Resolution
Component Output
Player Menu
480i
English
Follow the procedure below
depending on the setting items.
4
5
A) If “B” does not appear on the right side
of the setting items when you select the
items:
Press [OK] repeatedly to change
options.
B) If “B” appears on the right side of the
setting items when you select the items:
1) Press [OK].
2) Use [K / L] to select options, then
press [OK].
• Use [s] or [RETURN] to go back to the
previous screen.
Press [SETUP] to exit.
EN
29
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
Custom
“
Custom” menu contains all the setting items.
In stop mode, press [SETUP].
1
2
3
Use [K / L] to select
[OK].
, then press
Use [K / L] to select your desired
setting category, then press [OK].
: Language
: Video
: Audio
: Parental
: Others
• For “Parental” menu, follow the procedure
on page 39.
Use [K / L] to select your desired
setting items.
4
5
Follow the procedure below
depending on the setting items.
A) If “B” does not appear on the right side
of the setting items when you select the
items:
Press [OK] repeatedly to change
options.
B) If “B” appears on the right side of the
setting items when you select the items:
1) Press [OK].
2) Use [K / L] to select options, then
press [OK].
• Use [s] or [RETURN] to go back to
the previous screen.
Press [SETUP] to exit.
6
30
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
S
Language
Language
Audio
Original
Off
Subtitle
Disc Menu
Player Menu
English
English
• To select the setting items and options, refer to “ Custom” on page 30.
• “ Quick” menu consists of the setting menus frequently used, and they are accompanied with
.
Setting items
Options
Audio
Original* / English / French / Spanish / German / Italian / Swedish / Dutch /
Russian / Chinese / Japanese / Korean / Danish / Finnish / Norwegian / Icelandic /
Hungarian / Romanian / Turkish / Greek / Irish / Portuguese / Polish / Czech /
Slovak / Bulgarian / Other
Sets the language for audio.
Subtitle
Sets the language for subtitle.
Off* / English / French / Spanish / German / Italian / Swedish / Dutch / Russian /
Chinese / Japanese / Korean / Danish / Finnish / Norwegian / Icelandic /
Hungarian / Romanian / Turkish / Greek / Irish / Portuguese / Polish / Czech /
Slovak / Bulgarian / Other
Disc Menu
English* / French / Spanish / German / Italian / Swedish / Dutch / Russian /
Sets the language for disc menu or Chinese / Japanese / Korean / Danish / Finnish / Norwegian / Icelandic /
pop-up menu.
Hungarian / Romanian / Turkish / Greek / Irish / Portuguese / Polish / Czech /
Slovak / Bulgarian / Other
*1
Player Menu
Sets the language for OSD
(on-screen display).
Auto(XXXX) / English* / Français / Español
*)Settings with (*) are the default.
*1) “Auto” activates the Get & Set Menu Language function. Refer to page 41.
- “Auto” is available only when “HDMI CEC” is set to “On”.
- inside the parentheses next to “Auto” will be the language which is currently selected by your TV.
• For “Audio”, “Subtitle”, and “Disc Menu”, if you select “Other”, enter the 4-digit-number code for the desired language.
(Refer to “Language Code List” on page 47.) Only the languages supported by the disc can be selected.
EN
31
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
S
Video
Video
TV Aspect
16:9 Wide
Auto
HDMI Video Resolution
HDMI Deep Color
Auto
Component Output
Progressive Mode
480i
Auto
Still Mode
Auto
• To select the setting items and options, refer to “ Custom” on page 30.
• “ Quick” menu consists of the setting menus frequently used, and they are accompanied with
.
Setting items
Options
TV Aspect
Sets the picture size according to
aspect ratio of the connected TV.
16:9 Wide*:
Select this when a wide-screen TV is connected. Discs recorded in wide-screen
format is played back over the entire TV screen.
4:3 Pan & Scan:
Select this to play back the discs recorded in wide-screen format with 4:3 TV in
the pan & scan mode (with the sides of the picture cut off). Discs which are not
specified for pan & scan are played back in the letter box mode.
4:3 Letter Box:
Select this to play back the discs recorded in wide-screen format with 4:3 TV in
the letter box mode. (with black strips at the top and bottom.)
16:9 Squeeze:
When playing back 4:3 images, the picture is displayed in the center of the 16:9
screen with a 4:3 aspect ratio.
HDMI Video Resolution
Sets the HDMI video resolution.
Auto*:
HDMI video resolution will be selected automatically depending on the
connected HDMI device.
480p
HDMI Deep Color
Auto*:
Sets whether to output the picture
The picture from HDMI OUT jack will be output with Deep Color to the
from HDMI OUT jack with Deep Color connected TV which supports HDMI Deep Color.
or not.
Off:
The picture from HDMI OUT jack will be output without Deep Color.
Component Output
Sets the video resolution for
component output.
480i*
480p
720p
1080i
Auto*:
Progressive Mode
Sets the optimum progressive mode The progressive mode will detect 24-frame film material (movies) and
for the image material output from
HDMI OUT jack and COMPONENT
VIDEO OUT jacks.
automatically select appropriate progressive mode.
Video:
Suited for playing back video material discs (TV shows or animation).
32
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
Setting items
Options
*1
Auto*:
Still Mode
Automatically selects the best resolution setting (“Frame” or “Field”) based on
the data characteristics of the pictures.
Adjusts picture resolution and quality
in still mode.
Field:
Stabilizes the pictures, although the picture quality may become coarse due to
the limited amount of data. Select “Field” when the pictures are still unstable
even if “Auto” is selected.
Frame:
Displays relatively motionless pictures in higher resolution. “Frame” improves
the picture quality, although it may unstabilize the pictures due to alternate
output of 2-field data.
*)Settings with (*) are the default.
*1) An individual picture on the TV screen is called “Frame”, which consists of two separate images called “Field”.
Some pictures may be blurred at the auto setting in “Still Mode” setting due to their data characteristics.
Note for “HDMI Video Resolution” and “Component Output”
• Even if you set “HDMI Video Resolution” setting to “Auto”, when this unit is connected to a DVI compatible display
devices with an HDMI-DVI cable, 480p signal will be output.
• Video and audio signals may be distorted temporarily when switching to / from the HDMI output mode.
• You cannot change the video resolution during Blu-ray Disc playback. To change the resolution, stop playback.
• In order to get natural and high quality film reproduction of 24-frame film material, use an HDMI cable (High Speed
HDMI Cable is recommended) and select “Auto” if the connected TV is compatible with 1080p24 frame input.
• Even if the connected TV is compatible with 1080p24 frame input and you set “HDMI Video Resolution” setting to
“Auto”, when the contents of the disc are not compatible for 1080p24 frame, 1080p60 frame will be output.
• If the picture is not output properly to the TV because of “HDMI Video Resolution” or “Component Output” setting,
press and hold [B PLAY] on the front panel for more than 5 seconds. Both settings will be reset to the default
automatically.
• For video resolution of the component output, you can only select the video resolution which is currently output
from HDMI OUT jack or “480i” if HDMI cable is connected.
• If the video resolution for the component output and HDMI video resolution do not match, the video resolution for
the component output will be switched to “480i”.
• If you play back copy-protected DVD-video, 480p signal will be output from COMPONENT VIDEO OUT jacks, when
“Component Output” setting is set to “720p” or “1080i”.
EN
33
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
S
Audio
Audio
BD Audio Mode
HDMI Audio Out
Down Sampling
DRC
Mix Audio Output
HDMI Multi(Normal)
On
Off
• To select the setting items and options, refer to “ Custom” on page 30.
• “ Quick” menu consists of the setting menus frequently used, and they are accompanied with
.
Setting items
BD Audio Mode
Options
Mix Audio Output*:
For BD, selects whether to output the Outputs the secondary and interactive audio with primary audio if it is available.
secondary and interactive audio with
primary audio if it is available or only
the primary audio. Refer to “Setting
the BD Audio Mode” on page 28.
HD Audio Output:
Outputs only the primary audio. Set this mode in order to output Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD audio of BD through HDMI
connection.
HDMI Audio Out
HDMI Multi(Normal)*:
The multi-channel audio signals are output from HDMI OUT jack with bitstream
or LPCM.
Sets the audio format for the
audio output from HDMI OUT jack.
Refer to page 35.
HDMI Multi(LPCM):
The multi-channel audio signals are output from HDMI OUT jack with LPCM.
Refer to pages 37-38 for setting options.
Audio Mute:
Mutes the HDMI audio signal, and set the signal format from DIGITAL OUT jack.
Refer to “Digital Out setting” on page 36 for setting options.
Down Sampling
On*:
Sets the digital audio output when
LPCM signals are converted to 48 kHz for output.
playing back BD or DVD recorded in Set to “On” when using digital connections to an AV amplifier that is not
LPCM.
compatible with sampling frequencies of 96 kHz.
Off:
For BD and DVD recorded in LPCM without copyright protection, 2-channel
audio signals up to 192 kHz are output as LPCM signals with no conversion.
DRC
On
Sets whether to compress the range
of sound volume (dynamic range
control) when Dolby Digital, Dolby
Digital Plus or Dolby TrueHD audio is
played back.
Off*
*)Settings with (*) are the default.
• Under following circumstances, “HDMI Multi(Normal)” and “HDMI Multi(LPCM)” are not available.
- HDMI cable is not connected to HDMI OUT jack.
- Connected TV is off.
- Connected TV is not compatible with audio output.
34
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
HDMI Audio Out Setting
When using HDMI connections make “HDMI Audio Out” setting in “Audio” menu according to the specifications of the
device to be connected. Refer to page 34. Normally, set it to “HDMI Multi(Normal)” so that the unit automatically picks
and outputs the best audio format suited to your connected device.
Device to be connected
“HDMI Audio Out” setting
Output HDMI audio signal
Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS, or DTS-HD bitstream are output from HDMI
OUT jack. Make the speaker settings on the
connected AV amplifier, etc.
Device compatible with Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD decoding
HDMI Multi(Normal)
Device compatible with 3 or more channels
of audio inputs (not Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS or DTS-HD
compatible)
Multi-channel audio signals are output from
HDMI OUT jack. Make the speaker settings with
the speaker setting items appear after you select
“HDMI Multi(LPCM)”. Refer to page 34.
HDMI audio will be mute, and Dolby Digital / DTS
bitstream or LPCM will be output from DIGITAL
OUT jack depending on “Digital Out setting”.
Refer to page 36.
HDMI Multi(LPCM)
Audio Mute
HDMI connection to a TV and digital audio
connection (coaxial) to an AV amplifier.
Audio signals output from HDMI OUT jack
“HDMI Audio Out” setting
HDMI Multi(Normal)
HDMI Multi(LPCM)
Media
Recording format
When “BD Audio
When “BD Audio
When “BD Audio
When “BD Audio
Mode” is set to “HD Mode” is set to “Mix Mode” is set to “HD Mode” is set to “Mix
Audio Output”
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
Audio Output”
Dolby Digital
Dolby Digital
Dolby Digital
DTS
Audio Output”
Multi LPCM
Audio Output”
Multi LPCM
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
*1
*1
Multi LPCM
Multi LPCM
*2
*2
Multi LPCM
Multi LPCM
BD-video
Multi LPCM
Multi LPCM
*3
*3
DTS-HD
DTS-HD
DTS
Multi LPCM
Multi LPCM
LPCM
Multi LPCM
Dolby Digital
DTS
Multi LPCM
Multi LPCM
Multi LPCM
Multi LPCM
2ch LPCM
Multi LPCM
Dolby Digital
DVD-video DTS
LPCM
2ch LPCM
2ch LPCM
DTS
audio CD
DTS-CD
2ch LPCM
Multi LPCM
*1) Outputs audio signals decoded from independent substream.
*2) Outputs audio signals decoded from Dolby Digital stream.
*3) Outputs audio signals decoded from DTS core stream.
• If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as multi LPCM or 2-channel
down-mixed LPCM depending on the capability of the connected device even if you select “HDMI Multi(Normal)” in
“HDMI Audio Out” setting.
Note
• The audio signals from HDMI OUT jack (including the sampling frequency, the number of channels and bit length)
maybe limited by the device that is connected.
• Among the devices that support HDMI, some do not support audio output (e.g. projectors). In connections with
device such as this unit, audio signals are not output from HDMI OUT jack.
• Video and audio signals may be distorted temporarily when switching to / from the HDMI output mode.
EN
35
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
Digital Out setting
When “Audio Mute” is selected in “HDMI Audio Out” setting, HDMI audio signal will be mute and the audio signals
output from DIGITAL OUT jack changes depending on “Digital Out” setting.
Quick A HDMI Audio Out A Audio Mute A Digital Out
Bitstream* :
When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD, the
corresponding core stream (Dolby Digital or DTS) are output.
LPCM :
LPCM signal will be output from DIGITAL OUT jack.
• This setting is not effective when the HDMI audio signal is output.
Audio signals output from DIGITAL OUT (COAXIAL) jack
For the settings in the “Digital Out” to take effect, “HDMI Audio Out” should be set to “Audio Mute”. Otherwise, the
settings made in the “HDMI Audio Out” will have a priority, and the same signal as being output from the HDMI OUT jack
will be output from the DIGITAL OUT jack as well. (Except that Dolby Digital will be output instead of Dolby Digital Plus
and Dolby TrueHD, and DTS signal will be output instead of DTS-HD.)
“Digital Out” setting
Bitstream
LPCM
Media
Recording format
When “BD Audio
When “BD Audio
When “BD Audio
When “BD Audio
Mode” is set to “HD Mode” is set to “Mix Mode” is set to “HD Mode” is set to “Mix
Audio Output”
Dolby Digital
Dolby Digital
Dolby Digital
DTS
Audio Output”
Dolby Digital
Dolby Digital
Dolby Digital
DTS
Audio Output”
Audio Output”
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
2ch Downmix LPCM
*1
*2
*1
*2
BD-video
*3
*3
DTS-HD
DTS
DTS
LPCM
2ch Downmix LPCM 2ch Downmix LPCM 2ch Downmix LPCM
Dolby Digital
DTS
Dolby Digital
DTS
2ch Downmix LPCM
2ch Downmix LPCM
2ch LPCM
DVD-video
LPCM
2ch LPCM
2ch LPCM
DTS
audio CD
DTS-CD
2ch LPCM
2ch Downmix LPCM
*1) Only the independent substream is decoded.
*2) Only the Dolby Digital substream is decoded.
*3) Only the core substream is decoded.
Note
• In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal, set “HDMI Audio
Out” setting to “HDMI Multi(LPCM)”.
36
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
Speaker setting (Available when you have HDMI cable connected to HDMI OUT jack)
This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround. To make the
most of its feature, set up your speakers appropriately by referring to the following table.
How to navigate through “HDMI Multi(LPCM)”:
1) Use [K / L] to select your desired menu item then
press [OK].
2) Use [K / L] to select your setting items.
• Press [RETURN] to go back to the previous screen.
3) Use [s / B] to select desired options. (Except for
“Test Tone”, “Default” and setting options in
“Speaker Size” setting.)
Front speaker (left)
Front speaker (right)
Subwoofer
For setting options in “Speaker Size” setting:
Press [OK] to select desired options.
Center speaker
For “Test Tone”:
Use [s / B] to select “Off”, “Manual” or “Auto”,
then press [OK].
• The test tone will be output. If you select “Manual”,
use [K / L] to select desired speaker, then use
[s / B] to adjust the volume. If you select “Auto”,
use [s / B] to adjust the volume of the speaker that
outputs the test tone.
Surround
Surround
speaker (right)
speaker (left)
• If you want to stop the test tone, press [RETURN].
Surround
back speaker
(right)
Surround
back speaker
(left)
For “Default”:
Press [OK] to reset to the default.
4) Press [SETUP] to exit.
e.g.) basic layout with 7.1-channel surround system
<Speaker setting for the audio signal output from HDMI OUT jack>
Quick A HDMI Audio Out A HDMI Multi(LPCM)
Custom A Audio A HDMI Audio Out A HDMI Multi(LPCM)
Menu
Speaker Size
Setting items
Front
Options
Descriptions
Large*
Small
Large*
Small
On
Large*
Small
Large*
Small
Large:
Selects the desired
speaker to set. Then
change the setting by
referring to the
For the large speakers with strong low
frequency reproduction capabilities.
Small:
For the small speakers which do not provide
strong bass sound.
You cannot change the setting of
“Subwoofer”.
Speakers which are not supported by the
connected device will be displayed in gray.
Center
Subwoofer
Surround
descriptions.
Surround Back
Default
Select “Default”, then press [OK] to reset
“Speaker Size” setting to the default.
EN
37
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
Menu
Setting items
Options
Descriptions
Channel Level
Tests or sets the
volume for each
speaker.
Test Tone:
Off*
Manual
Auto
Select “Off” to deactivate “Test Tone”.
Select “Manual”, then press [OK] to manually
set the volume for the desired speaker.
Select “Auto”, then press [OK] to
automatically output the test tone from each
speaker.
“Test Tone” is the test
tone which can be
output from the
speakers so you can
adjust the volume for
each speaker.
Front Lch
0dB to -12dB
(0dB*)
0dB to -12dB
(0dB*)
0dB to -12dB
(0dB*)
0dB to -12dB
(0dB*)
If you have selected “Manual” in “Test Tone”,
select the desired speaker to set and adjust
the volume for the selected speaker.
If you select “Auto” in “Test Tone”, test tone
will automatically be output in order. Adjust
the volume of the speaker that outputs the
test tone.
Center
Subwoofer
Front Rch
Surround Rch
Surround Back Rch
Surround Back Lch
Surround Lch
Default
0dB to -12dB
(0dB*)
0dB to -12dB
(0dB*)
0dB to -12dB
(0dB*)
0dB to -12dB
(0dB*)
Select “Default”, then press [OK] to reset
“Channel Level” setting to the default.
Delay Time
Distance
Feet*
Meters
Set the desired measure system. This measure
system will be used for “Delay Time” setting.
Press [OK] to switch the settings.
This is a parameter for
optimizing the timing
at which the sound
outputs from the
Front
0ft to 60ft (12ft*)
(0 m to 18 m (3.6 m*)) to the speaker to get the ideal delay time.
0ft to 60ft (12ft*)
(0 m to 18 m (3.6 m*))
0ft to 60ft (10ft*)
(0 m to 18 m (3.0 m*))
0ft to 60ft (10ft*)
(0 m to 18 m (3.0 m*))
Select the distance from the listening position
speakers according to
the distance from the
listening position.
Center
Surround
Surround Back
Default
Select “Default”, then press [OK] to reset
“Delay Time” setting to the default.
*)Settings with (*) are the default.
• For “Speaker Size” setting, the settings of each speaker size may be adjusted automatically corresponding to each
setting. (e.g. If “Front” is set to “Small”, you cannot set “Center”, “Surround”, and “Surround Back” to “Large”.)
• For “Delay Time”, the difference between the value of the “Front”, “Surround” and “Surround Back” setting cannot
exceed 15 ft (4.5m), and the difference between the value of the “Front” and “Center” setting cannot exceed 5 ft
(1.5m).
• For “Delay Time”, the value of the “Center”, “Surround” and “Surround Back” setting cannot exceed the value of the
“Front” setting.
• For “Delay Time”, the setting of “Center”, “Surround” and “Surround Back” will be changed automatically to the setting
value of the “Front”. (e.g. If the “Front” is set to 60ft (18m), the setting of “Center”, “Surround” and “Surround Back” will
be changed to 60ft (18m) as well.)
38
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
S
Parental
For
first
use
Ratings control allows you to set a limit, which prevents your children from viewing inappropriate materials. Playback
will be stopped if the ratings exceed the levels you set, and it will require you to enter a password before playing back
the disc.
Parental
BD Rating Level
DVD Rating Level
Password Change
All
All
1 Use [K / L] to select , then press [OK].
2 Use [Number buttons] to enter your 4-digit password.
For the first time use: Use [Number buttons] to enter any 4-digit number (except for 4737), then press [OK]. That
number will be used as the password from the second time. Record your password in case you forget it.
• If you forget the password, enter [4], [7], [3], [7]. The password will be cleared and rating level will be set to “All”.
• While you input the password, press [CLEAR] to clear the number, then re-enter the password.
3 Proceed to A – C
A) BD Rating Level
1) Use [K / L] to select “BD Rating Level”, then press [OK].
2) Use [K / L] to select your desired option, then press [OK].
“All”:
“Age Setting”:
To release the limitation.
To set the age limitation.
• After selecting “Age Setting”, use [Number buttons] to enter the age from 0 – 254.
(e.g. for age 15, press [0], [1], [5])
3) Press [SETUP] to exit.
B) DVD Rating Level
1) Use [K / L] to select “DVD Rating Level”, then press [OK].
2) Use [K / L] to select your desired level, then press [OK].
3) Press [SETUP] to exit.
RATING EXPLANATIONS
•
•
•
•
•
•
•
•
•
All
: Parental Control is inactive; all discs can played back.
: DVD software of any grades (adult / general / children) can be played back.
: No one under 18 admitted.
: Restricted; under 18 requires accompanying parent or adult guardian.
: Parental guidance recommended.
: Unsuitable for children under 13.
: Parental guidance suggested.
: General audience.
: Suitable for children.
8 [Adult]
7 [NC-17]
6 [R]
5 [PGR]
4 [PG-13]
3 [PG]
2 [G]
1 [Kid Safe]
C) Password Change
1) Use [K / L] to select “Password Change”, then press [OK].
2) Enter a new 4-digit password, then press [OK].
3) Press [SETUP] to exit.
EN
39
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
S
Others
Others
Angle Icon
On
On
Auto Power Off
HDMI CEC
Off
Disc
Media Select
Software Update
• To select the setting items and options, refer to “ Custom” on page 30.
• “ Quick” menu consists of the setting menus frequently used, and they are accompanied with
.
Setting items
Options
Angle Icon
On*:
The angle icon appears on the TV screen when playing back the scene with
various angle.
Off:
The angle icon disappears on the TV screen.
Auto Power Off
On*:
If this unit is left with no activity for more than 30 minutes, this unit turns off
automatically.
Off:
Sets off the auto power off.
HDMI CEC
Sets whether to utilize the HDMI CEC
function. Refer to page 41.
On
Off*
Media Select
Selects the media to playback.
Disc*:
Select this when you play back a disc.
SD Card:
Select this when you play back an SD Memory Card.
Software Update
Allows you to update this unit’s
firmware. Refer to page 42.
Current Version:
Indicates the current firmware version.
Disc Update:
Allows you to update this
unit’s firmware using a disc.
No*
Yes
40
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
S HDMI CEC
HDMI CEC allows integrated system control over HDMI and is part of the HDMI standard.
This function may not work properly depending on a device to be connected.
When “HDMI CEC” setting is set to “On”, functions listed below will be available.
One Touch Play
When this unit is turned on, the TV also is turned on and the appropriate external input channel will be selected
automatically. The appropriate external input channel can also be selected on your TV automatically when you press
[B (play)], [H (skip)], [G (skip)], [Number buttons], [DISPLAY], [TOP MENU], or [POP MENU / MENU] when the
unit’s power is on. (Buttons other than [B (play)] works only with discs inserted.)
Standby
When you press and hold [STANDBY-ON Q] for 2 seconds, it turns off the power of the TV first and then turns off the
power of this unit also.
When the connected HDMI CEC compatible display device is turned off, this unit may also turn off together.
System Information
Get & Set Menu Language
The unit recognizes the OSD language set for the TV and automatically sets the same language as the player menu
language (OSD menu language) for this unit.
• This feature is available only when “Auto(XXXX)” is selected in “Player Menu” in the setup menu. (Refer to “Player Menu”
on page 31.)
S Current Version
You can confirm the current software version.
1 Use [K / L] to select
, then press [OK].
2 Use [K / L] to select “Software Update”, then press [OK].
3 Use [K / L] to select “Current Version”, then press [OK].
Others
Current Version
Current Version
x.xxx
If you wish to check latest update
or other product information,
please check our Website.
4 Press [OK] or [RETURN] to exit.
Note
EN
41
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
S Software Update
This unit lets you update the firmware yourself using a firmware update disc.
To update the firmware, you must first download the latest firmware to a disc, then execute “Software Update”.
1 Prepare a firmware update disc:
direction described on the site.
• Use a blank disc and download one firmware per disc.
• For more details on how to download the firmware, please refer to the site.
2 Use [K / L] to select
, then press [OK].
3 Use [K / L] to select “Software Update”, then press [OK].
Others
Angle Icon
On
On
Off
Auto Power Off
HDMI CEC
Media Select
Disc
Software Update
4 Use [K / L] to select “Disc Update”, then press [OK].
• Confirmation message will appear.
5 Use [K / L] to select “Yes”, then press [OK].
Others
Disc Update
Software Update?
No
Yes
Software Update
Please insert a disc for software update.
If you want to exit update, please 'RETURN'.
• Disc tray will open automatically.
6 Insert the firmware update disc created at step 1.
• When the disc is loaded, firmware version information and a confirmation message will appear.
Software Update
Loading Disc...
42
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
7 Use [s / B] to select “Yes”, then press [OK].
• Loading of the firmware will start.
Software Update
The indicators blinks for this procedure.
Current Version
Insert Version
: 1.000
: 1.001
1. Start
Select ‘Yes’ and press ‘OK’ button to start updating.
Press ‘No’ to exit software update.
DISC IN
PLAY
STANDBY-ON
Yes
No
2. Loading / Updating
Software Update
2. Updating
1. Loading
DISC IN
PLAY
STANDBY-ON
DISC IN
PLAY
STANDBY-ON
Loading Software...
If you want to exit update, press ‘RETURN’.
Software Update
2. Updating
1. Loading
Updating Software...
Please wait for a few minutes.
Do not unplug the AC cord or interrupt updating process.
When Update is completed unit will automatically turn Off.
Update disc will eject after unit automatically turns back on.
3. Finish
(Success)
Updating:
Success :
and
and
flash alternately.
remain on.
DISC IN
PLAY
PLAY
STANDBY-ON
STANDBY-ON
(Error)*
DISC IN
* If the indicator shows Error...
1) Unplug the AC power cord and turn the unit again.
2) Confirm the current firmware version.
3) If the firmware version is updated, the software update has succeeded. If not, please follow the steps 2 to 8 on
pages 42-43.
8 After the firmware update finishes, this unit will restart, and eject the disc automatically.
• Software updating is now complete. Please take out the firmware update disc.
Note
• You can check the current firmware version in “Current Version” in “Software Update” menu.
• Please do not unplug the AC power cord while executing “Software Update”.
• All settings will remain the same even if you update the firmware version.
EN
43
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETUP
Initialize
Initialize the setting or SD Memory Card.
In stop mode, press [SETUP].
1
2
3
Use [K / L] to select , then press
[OK].
Use [K / L] to select a desired option,
then press [OK].
“Setup”:
Resets the setup menu to the default.
“Format SD Card”
(Available only when an SD Memory Card is
inserted.):
Initializes the SD Memory Card. After
confirmation message appears, use [K / L]
to select “Yes”, then press [OK].
“Erase Saved BD-ROM Data (Player)”:
Clears the data saved for the BD-ROM
contents, such as BD-ROM game scores, from
this player.
“Erase Saved BD-ROM Data (SD Card)”
(Available only when an SD Memory Card is
inserted.):
Clears the supplemental data for the BD-ROM
playback, such as subtitle data, from the SD
Memory Card.
Initialize
Setup
Format SD Card
Erase Saved BD-ROM Data (Player)
Erase Saved BD-ROM Data (SD Card)
Press [OK]. (For “Setup” and “Format
SD Card” only)
4
• Final confirmation message will appear. Select
“Yes”, then press [OK].
Press [SETUP] to exit.
5
Note
• The setting for “Parental” will not be reset.
Caution
• Do not remove the SD Memory Card while executing
the “Format SD Card” or the “Erase Saved BD-ROM
Data (SD Card)”. It damages the card.
44
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
Troubleshooting
If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the
following checklist.
Problem
Solution
No power
- Check if the AC cord is properly connected.
- Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again.
No sound or picture
Distorted picture
- Check if the connected TV is turned on.
- Check if the connections are made securely and correctly.
- Check whether the connected TV or other device supports HDCP. (This unit will not
output a video signal unless the other device supports HDCP.)
- Check whether the output format of this unit (HDMI FORMAT) matches the
supported input format of other connected device.
- Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
- Connect this unit directly to the TV. If the RCA audio / video cables are connected
to a VCR, pictures may be distorted due to the copy right protection system.
- Make sure the disc is compatible with this unit.
Completely distorted picture
or black / white picture with
BD / DVD
No sound or distorted sound
- Adjust the volume.
- Check if speakers are connected correctly.
- Check the HDMI connections.
- Check the settings in “Audio” menu.
- Check the disc for fingerprints / scratches and clean with a soft cloth wiping from
center to edge.
Picture freezes momentarily
during playback
- Clean the disc.
- Clean the disc.
Disc cannot be played back
- Ensure the disc label is facing up.
- Check if the disc is defective by trying another disc.
- Cancel the ratings control or change the control level.
- Insert a correct disc that can be played back on this unit.
- The format of the card does not match that accepted by this unit or the card is not
compatible.
SD Memory Card cannot be
read
No return to start-up screen
when disc is removed
The unit does not respond to
the remote control
- Reset this unit by turning it off, then on again.
- Aim the remote control directly at infrared sensor window on the front panel.
- Reduce the distance to infrared sensor window.
- Replace the batteries in the remote control.
- Re-insert the batteries with their polarities (+ / - signs) as indicated.
- To completely reset the unit, press and hold [Q STANDBY-ON] on the front panel
for 10 seconds to shut down the unit or unplug the AC cord from the AC outlet for
5-10 seconds.
Buttons do not work or the
unit stops responding
The unit does not respond to
some operating commands
during playback
The unit cannot read BD /
DVD/ CD
- Operations may not be permitted by the disc.
Refer to the instructions of the disc.
- Condensation? (Let sit 1 or 2 hours)
- You are attempting to playback a disc other than one with one of the Logos on
page 14.
- Wipe the dirt off the disc or replace the disc.
Angle does not switch
- The angle cannot be switched for BD / DVD which do not contain multiple angles.
In some cases multiple angles are only recorded for specific scenes.
- Check the settings in “Parental” menu.
Playback does not start when
the title is selected
The password for rating level
has been forgotten
- Enter the default password “4737”, then your forgotten password will be cleared.
Note
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this
manual for details on correct operations.
• Some functions are prohibited on some discs.
EN
45
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
Glossary
Analog Audio
Dolby TrueHD
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also
“Digital Audio”.
Dolby TrueHD is a lossless coding technology developed
for next generation optical discs. Blu-ray Disc supports 7.1
multi-channel surround sound output.
DTS (Digital Theater System)
DTS is a multi-channel surround sound system. By
connecting to DTS decoder, you can enjoy movie dynamic
and realistic sound like movie theater. DTS surround
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen is
almost square); widescreen models are 16:9 (the TV screen sound technologies were developed by DTS, Inc.
is almost twice as wide as it is high).
DTS-HD
BD-Java
DTS-HD is a lossless coding technology developed as an
With some BD which support Java applications, you can
enjoy the interactive functions such as games or
interactive menus.
extension of the original DTS Coherent Acoustics format.
Blu-ray Disc supports 7.1 multi-channel surround sound
output.
Blu-ray Disc (BD)
HDMI (High-Definition Multimedia Interface)
Blu-ray Disc is a next generation optical video disc which is A digital interface between audio and video source. It can
capable of storing much more data than a conventional
DVD is. The large capacity makes it possible to benefit
from the features such as high-definition videos, multi-
channel surround sounds, interactive menus and so on.
transmit component video, audio, and control signal with
one cable connection.
JPEG (Joint Photographic Experts Group)
JPEG is a method of compressing still picture files. You can
copy JPEG files on BD-RE/-R, DVD, CD-RW/-R or SD Memory
Card from a computer and play back the files in this unit.
Chapter
Just as a book is split up into several chapters, a title on a
BD-video or DVD-video is usually divided into chapters.
See also “Title”.
PCM (Pulse Code Modulation)
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality that requires a lot
Component Video Output
Each signal of luminance (Y) and component (PB/CB, PR/CR) of data compared to formats such as Dolby Digital and
is independent to output so that you can experience
picture Color as it is.
MPEG audio. For compatibility with digital audio recorders
(CD, MD and DAT) and AV amplifiers with digital inputs,
this unit can convert Dolby Digital, DTS, and MPEG audio
Also, due to compatibility with progressive video (525p/
480p), you can experience higher-density picture than that to PCM. See also “Digital Audio”.
in interlace (525i/480i).
Region Code
Digital Audio
Regions associate discs and players with particular areas of
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-to-
digital converter, generating a stream of numbers. On
playback, a digital-to-analog converter generates an
analog signal based on these numbers. See also “Sampling
Frequency” and “Analog Audio”.
the world. This unit will only play back discs that have
compatible region codes. You can find the region code of
your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Sampling Frequency
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling in
one second defines as sampling frequency. The higher the
Dolby Digital
The system to compress digital sound developed by Dolby rate, the better the sound quality.
Laboratories. It offers you sound of stereo (2ch) or multi-
channel audio.
Title
A collection of chapters on BD-video or DVD-video. See
also “Chapter”.
Dolby Digital Plus
Dolby Digital Plus is the next generation digital audio
compression technology developed as an extension to
Dolby Digital. Blu-ray Disc supports 7.1 multi-channel
surround sound output.
Track
Audio CD use tracks to divide up the content of a disc. The
BD-video or DVD-video equivalent is called a chapter. See
also “Chapter”.
46
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
Language Code List
Language
Code
Language
Code
Language
Code
Language
Siswat
Slovak [SLO]
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Code
A-B
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6565
6557
6558
6561
5165
6567
6569
6568
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
Nepali
Norwegian [NOR]
Hungarian [HUN]
O-R
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
Portuguese
[POR]
Quechua
Rhaeto-
Romance
Romanian
[RUM]
Russian [RUS]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
6149
6164
6159
6247
6265
5247
6258
6266
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Breton
Bulgarian [BUL]
Burmese
Byelorussian
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
6367
6459
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
U-Z
Ukrainian
Urdu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
6461
6467
Uzbek
Croatian
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Estonian
5861
5847
5868
5860
5866
F-H
Faroese
Fiji
5261
5256
5255
Finnish [FIN]
Note
• If you choose a language that has a 3-letter-language code (written in bracket), the code will be displayed every
time you change the audio or subtitle language setting on page 27. If you choose any other languages, “---” will be
displayed instead.
EN
47
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
General
Signal system
NTSC color
Power requirements
Power consumption
120 V AC, 60 Hz
20 W (standby: 0.5 W)
Dimensions (width x height x depth) 14-3/16 x 2 x 8-16/8 inches (360 x 50 x 215mm)
Weight
4.2 lbs. (1.9 kg)
Operating temperature
Operating humidity
41°F (5°C) to 104°F (40°C)
Less than 80 % (no condensation)
Terminals
Video output
RCA jack x 1
1 Vp-p (75Ω)
Component video output
RCA jack x 3
Y: 1 Vp-p (75Ω)
PB/CB: 700 mVp-p (75Ω)
PR/CR: 700 mVp-p (75Ω)
HDMI output
HDMI jack x 1
Video: 480p, 720p, 1080i, 1080p, 1080p24 / Audio
L/R: 2 Vrms (output impedance: more than 1kΩ)
500 mVp-p (75Ω)
Audio output (Analog)
RCA jack x 2
Audio output (Digital)
RCA jack x 1
Note
• The specifications and design of this product are subject to change without notice.
48
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
Disc handling
Maintenance
Servicing
• Please refer to relevant topics on “Troubleshooting” on
page 45 before returning the product.
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not
used.
• Note that discs with special shapes (heart-shaped discs,
octagonal discs, etc.) cannot be played back on this unit.
Do not attempt to playback such discs, as they may
damage the unit.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts
inside. Turn off, unplug the power plug, and please
contact 1-800-605-8610 or visit :
IR signal check
Cleaning the cabinet
• Wipe the front panel and other exterior surfaces of the
unit with a soft cloth.
• If the remote control is not working properly, you can use
a digital camera (including a cellular phone with built-in
camera) to see if it is sending out an infrared signal.
• Never use a solvent, thinner, benzene or alcohol to clean
the unit. Do not spray insecticide liquid near the unit.
Such chemicals may discolor the surface or damage the
unit.
• With a digital camera
(including built-in cell phone cameras):
Point a digital camera towards the
remote control. Push any button on the
remote control and look through the
digital camera. If the infrared light
appears through the camera, the remote
control is working.
Cleaning discs
• When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center to out. Do not wipe in a
circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
Cleaning the disc lens
• If this unit still does not perform properly although you
refer to the relevant sections and to “Troubleshooting” in
this manual, the laser optical pickup unit may be dirty.
Consult your dealer or an authorized service center for
inspection and cleaning of the laser optical pickup unit.
EN
49
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
50
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
EN
51
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship
as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date
of original retail purchase. Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of
original retail purchase.
Any product sold and identified as refurbished or renewed carries a ninety (90) days labor and parts
limited warranty.
Note:
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER
PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE
UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This limited warranty does not apply to any
product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occur during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products
not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling,
misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or
office use of this product, or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT
OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF
OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM
STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION
WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT
PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI
CORP. will not reimburse you for any service done by unauthorized service providers without prior written
approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please
contact us at:
FUNAI SERVICE CORPORATION
Tel: 1-800-605-8610
2200 Spiegel Drive Groveport, OH 43125
E5P00UD_E5P01UD
1VMN27793 ★
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|