Magnavox Blu ray Player MBP5210 User Manual

Owner’s Manual  
MBP5210  
Blu-ray Disc™ / DVD Player with Built-in WiFi  
© 2011 Funai Electric Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11.NETWORK FEATURES........................................................37  
17.NETWORK SERVICE DISCLAIMER..............................59  
18.MAINTENANCE......................................................................60  
19.TRADEMARK INFORMATION.......................................61  
20.GLOSSARY..................................................................................63  
21.ESPAÑOL.....................................................................................65  
11.1 Before Using Network Features....................................... 37  
11.2 Information on Network Services.................................. 37  
12.LIST OF SETTINGS................................................................38  
13.SETUPS..........................................................................................41  
13.1 Network Connection............................................................. 41  
13.2 fun-Link (HDMI CEC)............................................................. 47  
13.3 HDMIVideo Resolution......................................................... 47  
13.4 Parental............................................................................................ 48  
13.5 Software Update........................................................................ 50  
13.6 Initialize............................................................................................ 52  
21.1 Mando a Distancia.................................................................... 65  
21.2 Encontrar el Canal deVídeo en suTelevisor............. 67  
21.3 Instalación Inicial......................................................................... 67  
14.TROUBLESHOOTING.........................................................53  
15.LANGUAGE CODE LIST....................................................57  
16.SPECIFICATIONS....................................................................58  
LIMITED WARRANTY..............................................back cover  
EN-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. SAFETY INSTRUCTIONS  
To Avoid the Hazards of Electrical Shock and Fire  
• Do not handle the AC power cord with wet hands.  
• Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.  
• Do not put your fingers or objects into the unit.  
Location and Handling  
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.  
• Avoid a place with drastic temperature changes.  
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.  
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit  
is placed too close to them. In this case, please ensure enough space between the external devices and the unit.  
• Depending on the environment, the temperature of this unit may increase slightly.This is not a malfunction.  
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.  
Dew Condensation Warning  
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a  
few hours until its inside gets dry.  
- The unit is moved from a cold place to a warm place.  
- Under conditions of high humidity.  
- After heating a cold room.  
Note about Recycling  
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in  
accordance with your local recycling regulations.  
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations  
concerning chemical wastes.  
Click on  
Notice for Progressive Scan Output  
• Consumers should note that not all high definition television sets are fully compatible with this product and may  
cause artifacts to be displayed in the picture. In case of picture problems with 480 progressive scan output, it  
is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions  
regarding yourTV set compatibility with this 480p BD / DVD player, please contact our customer service center.  
EN-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. SUPPLIED ACCESSORIES  
• Remote Control (NB958UD)  
• Batteries (AAA, 1.5V × 2)  
• Audio / video cables  
• SETUP MANUAL  
MAGNAVOX is a registered trademark of Philips Electronics North America Corporation and is used by Funai  
Electric Co. Ltd. and Funai Corporation, Inc. under license from Philips Electronics North America.  
© 2012 Funai Electric Co., Ltd.  
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,  
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written  
consent of Funai.  
Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.  
Information in this document is subject to change without notice. Funai reserves the right to change the content  
herein without the obligation to notify any person or organization of such changes.  
EN-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. FEATURES  
4.1 Features  
Blu-ray Disc™  
You can enjoy Blu-ray Disc™ which is capable of storing five times more data than a conventional DVD.  
BD-Java  
With some Blu-ray™ discs which support Java applications, you can enjoy the interactive functions such as games or  
interactive menus.  
DVD upscaling for enhanced picture quality  
Your current DVD will look even better than before thanks to video upscaling. Upscaling will increase the resolution  
of standard definition DVD to high definition up to 1080p over an HDMI connection.The picture will be less jagged  
and more realistic for a near high definition experience.  
Enjoy your content on different kinds of media  
Full backwards compatibility with DVD, CD and SD Memory Card ensures that you can continue to enjoy your  
current audio-video collection. Additionally, you can enjoy AVCHD / MP3 / WMA / JPEG files.  
Listen to rich multi-channel surround sound  
Multi-channel surround sound, which realizes real-to-life sound and makes you feel that you are really there.  
Easy and simple connection to your HDTV via HDMI  
Connect this unit to your HDTV with one single HDMI (High-Definition Multimedia Interface) cable. It is recommended  
to use a High Speed HDMI cable for better compatibility.The high definition video output signal will be transferred to  
your HDTV without conversion to analog signals, so you will get excellent picture and sound quality, completely free from  
noise.Thanks to other multiple outputs, you can also easily connect to your home theater system or amplifier.  
fun-Link (HDMI CEC) (Consumer Electronics Control)  
This unit supports fun-Link (HDMI CEC), which allows integrated system control over an HDMI cable and is part of  
the HDMI standard.This function may not work properly on some devices.  
PiP (BONUSVIEW™)  
Some BD-videos have the PiP function which enables you to display the secondary video in the primary video.You can  
call up the secondary video by pressing [MODE] whenever the scene contains the secondary video.  
BD-Live™  
BD-Live™ (BD-ROM version 2 Profile 2.0) that allows interactive functions to be used when this unit is connected  
to the Internet in addition to the BONUSVIEW™ function.The various functions differ depending on the disc.  
Pop menu  
Some BD-videos have a pop menu which is a navigation menu that can be called up and be operated on theTV screen  
without interrupting playback.You can call up the pop menu by pressing [POP MENU/MENU]. Contents in the pop menu  
vary depending on the disc.  
HDMI Deep Color  
Deep Color reduces posterization (color banding) effect of the playback image.  
Continued on next page.  
EN-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HDMI 1080p/24 output (Blu-ray Disc™ only)  
This unit is equipped with the feature which can provide smooth movement during playback of film originated material  
with the frame rate of 24 frames per second with progressive. (Available only when the display device is connected by an  
HDMI cable.) Refer to “HDMIVideo Resolution” on page 47.  
Playing back contents from an SD Memory Card  
You can play back AVCHD / MP3 / WMA / JPEG files stored in an SD Memory Card. BD-ROM Profile 2.0 (BD-Live™)  
and Profile 1.1 discs sometimes store picture-in-picture commentary, subtitles or other extras in the SD Memory Card  
for use during playback with the BD-video.  
Playing back AVCHD files  
This unit supports playback of AVCHD format files (new format for high definition video camcorders) recorded on  
disc / SD Memory Card.Your high definition personal archive is playable in HD quality.  
x.v.Color  
This unit supports playback of video contents on discs recorded with “x.v.Color” technology.To watch this video  
content with the “x.v.Color” space, aTV or other display device supporting both video image reproduction using  
“x.v.Color” standard and capability of manual switching of its color space setting is required. Please refer to the  
owner’s manual of your display device for further information.  
Enjoy contents stored on DLNA certified home media servers  
This unit is a DLNA certified media player that can play video, music and photo files stored on DLNA certified  
home media servers connected to your home network. (not warranted for wireless environment)  
Netflix  
With this unit, you can enjoy movies andTV episodes streamed instantly from Netflix via the Internet. In order to  
is available only in the United States.)  
VUDU  
This unit supportsVUDU which is the leading HD on-demand video service.WithVUDU, you can also enjoy  
various kinds of Internet applications. In order to use this feature, you must connect this unit to the Internet  
EN-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.2 Product Info  
“Product Info” screen provides information about this unit’s software version.You can also download the latest software  
from the Magnavox website and update it yourself if it is newer than the version currently on your unit.The current  
version of software on your unit can be seen on the “Product Info” screen.  
To access “Product Info”, follow the procedure below.  
1. Press [HOME].  
2. Use [Î/ï/Í/Æ] to select “Settings”, then press [OK].  
3. Use [Î/ï] to select “Others”, then press [OK].  
4. Use [Î/ï] to select “Product Info”, then press [OK].  
4.3 Symbols Used in this Owner’s Manual  
To specify which media type each function is applicable to, we put the following symbols at the beginning of each  
item to operate.  
Symbol Description  
Description refers to BD-video  
Description refers to DVD-video  
Description refers to audio CD / DTS-CD  
Description refers to DVD-RW/-R and SD Memory Card with AVCHD files  
Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and SD Memory Card with MP3 files  
Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and SD Memory Card with Windows Media™  
Audio files  
Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and SD Memory Card with JPEG files  
Description refers to video files in the DLNA home server  
Description refers to music files in the DLNA home server  
Description refers to photo files in the DLNA home server  
If you do not find any of the symbols listed above under the function heading, the operation is applicable to all  
media.  
EN-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. FUNCTIONAL OVERVIEW  
5.1 Front Panel  
4
6 7  
5*  
1
2*  
3
8
(*)The unit can also be turned on by pressing these buttons.  
1. Disc tray  
6. STANDBY/ON indicator  
• Flashes while getting ready to start.  
2. OPEN/CLOSE button*  
3. Infrared sensor window  
4. Ê STOP button  
• Dims and flickers when IR remote signal is received.  
7. . STANDBY/ON button  
8. SD card slot  
5. Æ PLAY button*  
D Note  
®
• Due to new ENERGY STAR requirements, this unit will automatically turn on the screen saver after 5 minutes  
of inactivity and enter standby mode after 25 minutes of inactivity.  
5.2 Rear Panel  
1
2
3
4 5  
1. AC power cord  
2. LAN terminal  
3. HDMI OUT jack  
4. AUDIO OUT jacks  
5. VIDEO OUT jack  
C Caution  
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage  
to the unit.  
• This unit does not have aTV RF modulator.  
EN-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.3 Remote Control  
(*)The unit can also be turned on by pressing these  
buttons.  
1. STANDBY/ON . button  
Press to turn on the unit, or to switch the unit into  
Standby mode. (To completely turn off the unit, you  
must unplug the AC power cord.)  
2. RED / GREEN / BLUE /YELLOW buttons  
1
2
13*  
14  
Press to activate shortcut keys on some BD-video  
functions.  
When file list is shown, press to switch between  
pages.  
3
3. TOP MENU button  
Blu-ray Disc™:  
4
15  
Press to display the top menu.  
DVD:  
Press to display the title menu.  
4. Î/ï/Í/Æ buttons  
Press to select items or settings.  
5. HOME button  
5
6
16  
17  
7*  
8
18  
19  
20  
21  
22  
23  
24  
9
Press to display the home menu.  
6. ¢ (reverse) button  
During playback, press to fast reverse the playback.  
7. Æ (play) button*  
10  
11  
12  
Press to start playback or resume playback.  
8. H (skip) button  
During playback, press once to return to the  
beginning of the current title, chapter, track or file.  
25  
During playback, press twice to return to the  
previous title, chapter, track or file.  
During the JPEG playback, press to return to the  
previous file.  
9. Ê (stop) button  
Press to stop playback.  
10. Number buttons  
Press to select a chapter during playback.  
Press to enter numbers in the input field.  
11. MODE button  
During playback, press to display the play menu.  
Continued on next page.  
EN-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12. NETFLIX button  
Press to launch Netflix.  
13. OPEN/CLOSE button*  
Press to open or close the disc tray.  
14. POP MENU/MENU button  
Blu-ray Disc™:  
Press to display the pop menu.  
DVD:  
Press to display the disc menu.  
15. OK button  
Press to confirm or select menu items.  
16. RETURN button  
Press to return to the previously displayed menu or screen function.  
17. (forward) button  
During playback, press to fast forward the playback.  
When playback is in pause, press to slow forward the playback.  
18. G (skip) button  
During playback, press to skip to the next chapter, track or file.  
When playback is in pause mode, press to forward the playback picture by picture.  
19. Δ (pause) button  
Press to pause playback.  
20. DISPLAY button  
Press to display the on-screen display menu.  
21. REPEAT button  
Press to select repeat mode.  
22. SUBTITLE button  
Press to select subtitles on a disc.  
23. AUDIO button  
Press to select the audio channel (such as audio languages) on a disc.  
24. VUDU button  
Press to launchVUDU.  
25. CLEAR button  
Press to clear the information once entered.  
D Note  
• The STANDBY/ON indicator on the front panel dims and flickers when it receives the IR signal from the remote  
control.  
Continued on next page.  
EN-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the Batteries in the Remote Control  
Install 2 AAA (1.5V) batteries matching the polarity indicated inside battery compartment of the remote control.  
C Caution  
Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:  
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.  
• Do not mix new and old batteries together.  
• Do not use different kinds of batteries together. Although they may look similar, different batteries may have  
different voltages.  
• Make sure that the + and - ends of each battery match the indications in the battery compartment.  
• Remove batteries from the battery compartment when the remote is not going to be used for a month or  
more.  
• When disposing of used batteries, please comply with governmental regulations or environmental public rules  
that apply in your country or area.  
• Do not recharge, short-circuit, heat, burn or disassemble batteries.  
Using the Remote Control  
Remote Control Usage Guidelines:  
• Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.  
• Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor  
window of the unit.  
• Remote controls of different devices can interfere with each other. Avoid using a remote control of another  
device which is located close to the unit.  
• Replace the batteries when you notice a fall-off in the operating range of the remote control.  
• The maximum operable ranges from the unit are as follows.  
Line of sight  
: approx. 23 feet (7 m)  
Either side of the center : approx. 16 feet (5 m) within 30°  
Above  
Below  
: approx. 16 feet (5 m) within 15°  
: approx. 10 feet (3 m) within 30°  
30˚  
30˚  
EN-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.4 Guide to On-Screen Display  
Home Menu  
When you turn on the unit, the home menu will appear automatically. Otherwise, press [HOME].  
Disc  
: Initiates playback of inserted disc, displays a list of tracks / files or the media filter menu  
:To access the menu of network services  
“Disc”  
“NET APP”  
: Displays a list of tracks / files on the inserted SD Memory Card or the media filter menu  
:To access the home network server (DLNA)  
:To access the setup menu  
“SD Memory Card”  
“Home Network”  
“Settings”  
:To setup network settings  
“Network Setup”  
Setup Menu  
TV Aspect  
Progressive Mode  
Still Mode  
: 16:9 Wide  
: Auto  
: Auto  
2
Video Out  
Audio Out  
Network  
HDMI  
1
Playback  
Others  
1. Category  
: Displays options for the highlighted item on the left whenever available.  
2. Menus / Options  
Play Menu  
During playback, press [MODE] to display the play menu.  
e.g.) Blu-ray Disc™  
Search  
Audio  
Subtitle  
Repeat  
Black Level  
Noise Reduction  
EN-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. CONNECTIONS  
6.1 HDMIVideo / Audio Connection  
(Supports up to 1080i(*1), 1080p(*2), 1080p/24(*3) resolution.)  
YourTV  
HDMI IN  
HDMI cable (not supplied)  
No analog audio connection required.  
(*1) 1080i : Outputs video data with a frame rate of 30 frames per second.  
(*2) 1080p : Outputs video data with a frame rate of 60 frames per second.  
(*3) 1080p/24 : Outputs video data with a frame rate of 24 frames per second.  
• Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the  
connector are matched.  
• When connected to an HDCP incompatible display device, the picture will not be displayed properly.  
• Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection.  
High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for better compatibility.  
6.2 StandardVideo + Standard Audio Connection  
(Supports only 480i resolution.)  
YourTV  
L
VIDEO IN  
AUDIO IN  
Video cable (supplied)  
Audio cable (supplied)  
R
• Connect this unit directly to theTV. If the audio / video cables are connected to aVCR then the pictures may be  
distorted due to the copyright protection system.  
EN-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.3 Connection to an Audio System  
• When you change the connections, all devices should be turned off.  
• When connecting the unit to an external audio system, refer to the User Manual for Setup / Configuration help.  
2-Channel Analog Audio Connection  
Stereo system with  
analog audio input jacks  
AUDIO IN  
R
Audio cable (supplied)  
L
.
HDMI Audio Connection  
AV receiver/amplifier with an HDMI input jack  
HDMI cable  
HDMI IN  
(not supplied)  
HDMI Audio Output  
“Audio Output”  
“Bitstream”  
“LPCM”  
“Off”  
setting  
“BD Audio Mode”  
“HD Audio Output” “Mix Audio Output” “HD Audio Output” “Mix Audio Output” Regardless  
Which audio format can be output depends on the compatibility of the connected device.  
setting →  
Media  
Audio Source  
Dolby Digital  
Dolby Digital Plus  
DolbyTrueHD  
DTS®  
Dolby Digital  
Dolby Digital Plus  
DolbyTrueHD  
DTS®  
DTS-HD®  
Multi LPCM  
Dolby Digital  
DTS®  
Multi LPCM  
Multi LPCM  
Multi LPCM  
Multi LPCM  
Multi LPCM  
Multi LPCM  
Multi LPCM  
Multi LPCM  
2ch LPCM  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
1
3
2
4
*
*
*
*
Dolby Digital  
Dolby Digital  
Multi LPCM  
Multi LPCM  
BD-video  
1
*
5
DTS-HD®  
DTS®  
Multi LPCM  
*
LPCM  
Dolby Digital  
DVD-video DTS®  
LPCM  
DTS®  
2ch LPCM  
DTS®  
DTS-CD  
AVCHD  
Multi LPCM  
Multi LPCM  
Multi LPCM  
2ch LPCM  
Dolby Digital  
LPCM  
Dolby Digital  
Multi LPCM  
2ch LPCM  
2ch LPCM  
Audio CD LPCM  
MP3  
MP3  
2ch LPCM  
Windows  
Media™  
Audio  
WMA  
2ch LPCM  
2ch LPCM  
Mute  
Continued on next page.  
EN-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
“Audio Output”  
“Bitstream”  
“LPCM”  
“Off”  
setting →  
“BD Audio Mode”  
“HD Audio Output” “Mix Audio Output” “HD Audio Output” “Mix Audio Output” Regardless  
Which audio format can be output depends on the compatibility of the connected device.  
setting →  
Media  
Audio Source  
Dolby Digital  
MP2  
Dolby Digital  
2ch LPCM  
Multi LPCM  
2ch LPCM  
Multi LPCM  
2ch LPCM  
Multi LPCM  
2ch LPCM  
Multi LPCM  
2ch LPCM  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
Mute  
DLNA  
Video  
LPCM  
Multi LPCM  
DLNA Music MP3 / WMA / LPCM 2ch LPCM  
1
1
*
Dolby Digital Plus  
WMA  
Dolby Digital Plus  
Netflix  
VUDU  
2ch LPCM  
*
Dolby Digital Plus  
MP3  
Dolby Digital Plus  
2ch LPCM  
1) Fully decoded.  
*
2) Only the independent substream is decoded.  
3) DolbyTrueHD stream is decoded.  
4) Only the Dolby Digital substream is decoded.  
5) Only the core substream is decoded.  
*
*
*
*
D Note  
• If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as multi LPCM or  
2-channel down-mixed LPCM depending on the capability of the connected device even if you select “Bitstream”  
in “Audio Output” setting.  
• If the connected device is not compatible with AAC, audio will be output as LPCM depending on the capability  
of the connected device.  
• When playing back a BD-video which only contains the primary audio, the audio output will be the same case as  
“HD Audio Output” even if the “BD Audio Mode” is set to “Mix Audio Output”.  
6.4 Connection to the Network  
By connecting this unit to the Internet, you can update the software via the Internet, play contents stored on DLNA  
home media servers or access BD-Live™, Netflix andVUDU services.  
- For more information about a software update, refer to “Network Update” on page 51.  
- For more information about DLNA, refer to “Playing BackVideo / Music / Photo from DLNA Certified Home  
Media Servers” on page 27.  
- For more information about BD-Live™, refer to “Enjoying BD-Live™ Discs Using Internet” on page 31.  
D Note  
• Wired connection is recommended when using the following features. (Using the following features with a  
wireless connection can be affected by other devices using radio frequencies.)  
- Play contents from DLNA certified home media servers  
-Video streaming services (Netflix /VUDU)  
- Network update  
Continued on next page.  
EN-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wired Connection  
Broadband router or hub  
Networking equipment  
(modem,etc.)  
WAN  
LAN  
LAN  
5
4
3
2
1
LAN cable (not supplied)  
LAN cable (not supplied)  
Internet  
C Caution  
• Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit.  
• Do not connect your PC directly to the LAN terminal of this unit.  
D Note  
• After you make a wired connection, set up necessary network settings. (For network setting of wired connection,  
refer to “Wired” on page 41.)  
• If your cable modem does not have router functions, connect a wired router.  
• If your cable modem has router functions but there is no vacant port, add a hub.  
• Please purchase shielded LAN cables at your local store and use them when you connect to network equipment.  
Wireless Connection  
Networking equipment  
(modem,etc.)  
LAN  
WAN  
Internet  
Wireless router  
LAN cable (not supplied)  
D Note  
• If using the wireless connection, refer to page 44 for “Wireless” setup to configure the network setting.  
• For a wireless router, use a router that supports the following IEEE 802.11 b/g/n. (“n” is preferred type for a  
stable operation of the wireless network.)  
• Our player supports infrastructure mode when using a wireless router.This unit does not support ad-hoc mode.  
• Other radio devices or obstacles may cause interference to the wireless network connection.  
EN-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. BEFOREYOU START  
7.1 Finding theViewingVideo Source Input onYourTV  
After you have completed all of the connections to yourTV, review the steps below.  
1. Press [STANDBY/ON .] to turn on the unit.  
2. Turn on yourTV.  
3. Please locate the input/video button onTV’s remote control. The button may vary on the brand and model of  
theTV. Once you have located the button, press until you see “Please wait...” or the Initial Setup menu on the  
screen.  
Please Wait...  
This is the correct viewing of the video source input.  
• If theTV is connected by an HDMI cable, it may take a few moments for the opening picture to appear.  
• If a certain amount of time has passed since you turned on the unit, welcome screen only appears the first  
time you turn on the unit.  
7.2 Initial Setup  
Please follow the instructions below to complete the initial setup.  
1. While welcome screen is displayed, use [Î/ï] to select “Next”, then press [OK].  
2. Language setup screen will appear. Use [Î/ï] to select your language, then press [OK].  
Language  
Please select your language for on-screen  
display.  
English  
Español  
Français  
Back  
3. “Quick Start Mode” screen will appear. Use [Î/ï] to select the desired mode, then press [OK].  
4. “Automatically check for latest software” screen will appear. Use [Î/ï] to select the desired mode, then press  
[OK].  
5. Network setup screen will appear. Use [Î/ï] to select the desired mode, then press [OK].  
• If you select “Wired”, refer to “Wired” on page 41 for further information.  
• If you select “Wireless”, refer to “Wireless” on page 44 for further information.  
EN-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. INFORMATION ON PLAYBACK  
8.1 Information on Playback  
Playable Discs and Files  
Playable discs  
Logos  
Blu-ray Disc™  
- BD-video  
- BD-RE* (ver. 2.1)  
(Recorded in BDMV format)  
- BD-R* (ver. 1.1 / 1.2 / 1.3)  
(Recorded in BDMV format)  
(Disc that is not finalized may not be played  
back.)  
DVD-video  
DVD-RW  
(finalized video mode discs only)  
DVD-R  
(finalized video mode discs only)  
CD-DA (audio CD)  
CD-RW  
CD-R  
KODAK Picture CD  
DTS-CD  
-
* Due to the intentional progression of the Blu-ray Disc™ format by its standard setting authority, the company  
cannot guarantee or warrant the playability of future extensions of the Blu-ray Disc™ format with this product.  
Playable files  
AVCHD  
Media  
DVD-RW/-R, SD Memory Card,  
miniSD Memory Card, microSD Memory Card,  
SDHC Memory Card, miniSDHC Memory Card,  
microSDHC Memory Card  
MP3  
BD-RE/-R, DVD-RW/-R, CD-RW/-R,  
SD Memory Card, miniSD Memory Card,  
microSD Memory Card, SDHC Memory Card,  
miniSDHC Memory Card, microSDHC Memory Card  
Windows Media™ Audio  
JPEG  
Continued on next page.  
EN-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Readable cards  
Playable files / data  
SD Memory Card (8 MB - 2 GB)  
miniSD Memory Card (16 MB - 2 GB)  
microSD Memory Card (256 MB - 2 GB)  
SDHC Memory Card (4 GB - 32 GB)  
miniSDHC Memory Card (4 GB - 8 GB)  
microSDHC Memory Card (4 GB - 16 GB)  
AVCHD, MP3,WMA, JPEG, picture-in-picture  
commentary, subtitles or other extras for  
BD-ROM ver. 2 (Profile 2.0 / Profile 1.1)  
Recommended Specifications  
AVCHD  
This unit cannot play back stand-alone AVCHD files (*.m2ts, *.mts or *.m2t) written to a DVD or copied to an SD  
Memory Card.The DVD or SD Memory Card containing AVCHD files must have a proper file and folder structure  
meeting AVCHD format specifications.  
Please use AVCHD compliant device / software to burn or copy AVCHD files to DVD or SD Memory Card.  
(Please refer to user manuals of the device / software for more information.)  
MP3 / WMA  
• Sampling frequency : 32 kHz, 44.1 kHz or 48 kHz  
• Constant bit rate  
: 112 kbps - 320 kbps (MP3),  
48 kbps - 192 kbps (WMA)  
JPEG  
Resolution  
• Upper limit  
: 2,560 x 1,900 dots (sub sampling is 4:4:4)  
5,120 x 3,840 dots (sub sampling is up to 4:2:2)  
• Lower limit  
: 32 x 32 dots  
• Maximum file size of a picture : 12MB  
Folder / File Number Limitations  
Blu-ray Disc™, DVD and SD Memory Card  
• 999 folders (groups) and 9,999 files.  
CD  
• 255 folders (groups) and 999 tracks / files.  
Caution / Note for SD Memory Cards  
C Caution  
• Use the write-protect switch on the SD / SDHC Memory Cards to ensure your data is securely protected when  
playing back contents from the card.  
• Do not try to open or modify the card.  
• Do not touch the terminal surface with your fingers or any metals.  
• Do not attach additional labels or stickers to cards.  
• Do not remove the label from the SD Memory Cards.  
EN-20  
Continued on next page.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D Note  
• This unit supports SD Memory Card with FAT12 / FAT16 file system, and SDHC Memory Card with FAT32 file  
system.  
• This unit does not support NTFS file system.  
• This unit may not read SD Memory Cards formatted on a computer. If that is the case, please reformat the SD  
Memory Cards in this unit and try again when the SD Memory Card is reformatted all files will be erased.  
• For miniSD Memory Card and microSD Memory Card, an adapter is necessary.  
• Portions of this product are protected under copyright laws and are provided under license by ARIS / SOLANA  
/ 4C.  
• Please keep the SD Memory Cards in their cases when you are not using them.  
Unplayable Discs and Files  
The following discs will not be played back in this unit.  
• CD-ROM software data discs  
• CD-ROM  
• CD-I (compact disc-interactive)  
• DVD-RAM  
• VSD (video single disc)  
• DVD-audio  
• video CD  
• HD DVD  
• SVCD  
• SDXC Memory Card  
• microSDXC Memory Card  
• unfinalized disc  
• BD-RE (ver.1.0)  
• BD-RE (ver.2.1) (Recorded in BDAV format)  
• BD-R (ver.1.1 / 1.2 / 1.3) (Recorded in BDAV format)  
• Blu-ray Disc™ that contains AVCHD files  
®
• Blu-ray Disc™ / DVD / CD / SD Memory Card contains DivX files  
• Blu-ray Disc™ / DVD hybrid disc (played back as a BD-video only)  
• DVD-RW/-R recorded in non compatible recording format  
• Super Audio CD - Only the sound on the CD layer can be heard.The sound on the high-density Super Audio  
CD layer cannot be heard.  
• Playability of dual discs is not guaranteed.  
• This unit cannot play back the disc contents protected by Windows Media™ Digital Rights Management (DRM).  
Continued on next page.  
EN-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BD-video  
Region Codes  
This unit has been designed to play back BD-video with region “A” and DVD-video with region “1” or  
“ALL”.You cannot play back BD-video or DVD-video that are labeled for other regions. Look for the  
symbols on your BD-video or DVD-video. If these region symbols do not appear on your BD-video or  
DVD-video, you cannot play back the disc in this unit.The letter or number inside the globe refers to  
region of the world. A BD-video or DVD-video labeled for a specific region can only be played back in the  
unit with the same region code.  
DVD-video  
Hint for Disc Playback  
The contents of a disc are generally divided into sections or folders (groups of titles / files) as shown below.  
BD-video, DVD-video,AVCHD  
title 1  
title 2  
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3  
Audio CD  
track 3  
track 1  
file 1  
track 2  
track 4  
track 5  
file 5  
MP3,Windows Media™ Audio, JPEG  
folder (group) 1  
folder (group) 2  
file 2  
file 3 file 4  
Description for Icons  
[
[
[
[
[
] : group (folder) icon  
] : video file icon  
] : music file icon  
] : movie file icon  
] : photo file icon  
Photo  
- “Folders” refers to a groups of files.  
- “Tracks” refers to the contents recorded on the audio CD.  
- “Files” refers to the contents on a disc which are recorded in AVCHD, MP3,WMA and JPEG (including KODAK  
Picture CD) file format.  
D Note  
• Unrecognizable characters will be replaced with asterisks.  
EN-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.2 Guide to File List  
Video / Music File List  
e.g.) MP3 mode  
1
File List  
TR - - - / 123  
- - : - - : - -  
Ê
2
3
6
5
DATA_xxxxx  
CD  
DATA  
Music 1  
MP_1.mp3  
MP_2.mp3  
MP_3.MP3  
MP_4.mp3  
MP_5.MP3  
MP_6.mp3  
4
Page Up  
Page Down  
1. Elapsed playing time of the current track  
2. Playback status symbol  
3. Media type  
4. Group (folder) / File list  
5. Name of disc / SD Memory Card  
6. Current track (file) number / Total number of tracks (files)  
Picture File List  
1
Thumbnail  
TR - - - /123  
Ê
2
3
06051_1140  
DATA  
Folder  
Folder  
Folder_002  
Folder_001  
4
Page Up  
Page Down  
1. Current file number / Total number of files  
2. Playback status symbol  
3. Media type  
4. Group (folder) / File list (thumbnails)  
How to Navigate through the Track / File List  
• Use [Î/ï] to move the highlight up and down in the list.  
To access the files in a group (folder), select the desired group (folder), then press [OK].  
• Press [Í] or [RETURN] to go back to the previous hierarchy.  
• Press [RED] or [GREEN] to change the page list up or down.  
• Press [YELLOW] to go back to the media mode screen.  
• Press [HOME] to exit.  
EN-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.3 How to Insert a Disc  
1. Press [OPEN/CLOSE ] to open the disc tray.  
2. Place the disc on the disc tray with its label side facing up.  
Align the disc to the disc tray guide.  
3. Press [OPEN/CLOSE ] to close the disc tray.  
• It may take a while to load the disc.  
EN-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. BASIC PLAYBACK  
9.1 Playing Back a Disc  
1. Insert a disc (refer to “How to Insert a Disc” on page 24).  
• For Blu-ray Disc™ / DVD / audio CD or a disc containing only one type of file, playback will start automatically.  
If not, press [Æ (play)].  
• Some discs may show a title or a disc menu. In this case, refer to “Using theTitle / Disc / Pop Menu” on page 28.  
2. Select the type of the file you want to play back, then press [OK].  
Music  
a. For “Music”, track / file list will be displayed. Select a group (folder) or track / file you want to play back then  
press [Æ (play)] or [OK] to start playback.  
• Refer to “Video / Music File List” on page 23 and “How to Navigate through theTrack / File List” on page 23.  
b. For “Photo”, thumbnail screen will appear.  
• Refer to “Picture File List” on page 23 and “How to Navigate through theTrack / File List” on page 23.  
c. For “AVCHD”, playback will start automatically.  
To skip to the next track / file  
To skip to the previous track / file  
To pause playback:  
To return to the normal playback:  
To stop playback  
: Press [G (skip)]  
: Press [H (skip)]  
: Press [Δ (pause)]  
: Press [Æ (play)]  
: Press [Ê (stop)]  
Playback will be in Resume-On-Stop mode.  
Resume-On-Stop Mode  
Blu-ray Disc™ / DVD / AVCHD  
When you press [Æ (play)] next time, the playback will start from the point where it has been stopped.  
Audio CD  
Playback will start from the point where it is stopped next time you press [Æ (play)].  
If you press [OK] instead of [Æ (play)], playback will start from the beginning of the track / file instead of  
resuming from the stop point.  
MP3 / WMA / JPEG / KODAK Picture CD  
Playback will start from the beginning of the current file next time you press [Æ (play)] or [OK].  
Continued on next page.  
EN-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D Note  
• Playback will also stop and the home menu will appear when you press [HOME].  
• For BD-Java application, the Resume-On-Stop may not be available.  
• If you press [OK] instead of [Æ (play)], playback can be started from the beginning of the disc even if it was in  
the Resume-On-Stop mode.  
• Resume-On-Stop mode remains in effect even after power is turned off, but will be canceled once the disc is  
ejected.  
• With regard to the multi-border BD-RE/-R, additionally recorded sections cannot be recognized.  
• With regard to the multi-border DVD-RW/-R, additionally recorded sections may not be recognized.  
D Note for JPEG / KODAK Picture CD Playback  
• Every press of [Í/Æ] will turn the image by 90 degrees when an image is displayed.  
• During playback, press [TOP MENU] to display thumbnail screen.  
• This unit conforms to ver.7.0 of KODAK Picture CD. For details of KODAK Picture CD, contact a shop that  
provides developing service for Kodak Inc.  
• Some unplayable folders or files may be listed due to the recording status.  
• High-resolution JPEG files take longer to be displayed.  
• Progressive JPEG files (JPEG files saved in progressive format) cannot be played back in this unit.  
9.2 Playing Back an SD Memory Card  
You can play back AVCHD / MP3 / WMA / JPEG files in an SD Memory Card.With the SD Memory Card, you can  
also enjoy the following functions.  
- Special additional contents for BD-ROM Profile 1 ver.1.1. (For more information about the special additional  
contents, refer to the instruction book that came with the disc.)  
- BD-Live™ function (BD-ROM ver. 2 Profile 2.0). (For more information about BD-Live™, refer to page 31.)  
SD Memory Card  
1. Insert an SD Memory Card.  
2. Press [HOME].  
3. Use [Î/ï/Í/Æ] to select “SD Memory Card”, then press [OK].  
4. Follow step 2 in “Playing Back a Disc” on page 25.  
To Remove the SD Memory Card  
In stop mode, gently push in on the SD Memory Card so the card will slightly eject, then pull it out slowly.  
Continued on next page.  
EN-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C Caution  
• Do not remove the SD Memory Card or switch the unit to the standby mode while the contents of the card  
are being accessed. It may result in malfunction or loss of the card’s data.  
• Use the write-protect switch on the SD / SDHC Memory Cards to ensure your data is securely protected when  
playing back contents from the card.  
D Note  
• The resume information will be cleared when;  
-[Ê (stop)] is pressed while in the Resume-On-Stop mode.  
-the SD Memory Card is removed.  
-the unit is switched to standby mode.  
• Do not delete the folders or files in the SD Memory Card with your computer.This unit may not read SD  
Memory Cards formatted on a computer.  
• If a folder or file name includes one of the following unrecognizable characters, the folder or file name may not  
be displayed correctly.  
. ,“ = + [ ] ; / \ : | ¥  
- Unrecognizable characters :  
9.3 Playing BackVideo / Music / Photo from DLNA Certified Home Media Servers  
On this unit, you can play video, music and photo files stored on DLNA certified media servers connected to your  
home network. In order to use this feature, you must connect this unit to your local network. (unwarranted for  
wireless environment)  
• For details, refer to the user manual of the DLNA certified device.  
1. Follow steps 1 to 2 in “NETWORK FEATURES” on page 37.  
2. Start DLNA home media servers in your home network.  
3. Press [HOME].  
4. Use [Î/ï/Í/Æ] to select “Home Network”, then press [OK].  
• This unit will start loading the media server list.  
To cancel loading, press [Ê (stop)].  
To reload the media server list, press [YELLOW].  
5. After loading, media server list will appear. Select a media server you want to access, then press [OK].  
6. File list of the selected media server will appear. Select a file you want to play back, then press [Æ (play)] or  
[OK] to start playback.  
• If you select a folder, select a file in the folder and then press [Æ (play)] or [OK] to start playback.  
Home Network  
TR - - - - / 1234  
- - : - - : - -  
Ê
DATA_xxxxx  
Photo_1  
MP_1.mp3  
MP_2.MP3  
WMA_1.wma  
WMA_2.WMA  
JP_1.jpg  
JP_2.JPG  
Page Up  
Page Down  
Server List  
• Refer to “Guide to File List” on page 23.  
Continued on next page.  
EN-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To control the playback, use following buttons.  
Button  
Action  
G (skip) For video files, playback will be step by step each time the button is pressed in pause mode.  
During playback, press to fast reverse/forward the playback.  
(forward)  
¢ (reverse)  
Pause the playback.  
Δ (pause)  
Æ (play)  
Return to the normal playback.  
Stop the playback. (For video files, playback will be in Resume-On-Stop mode.)  
Ê (stop)  
Resume-On-Stop mode for video files  
Playback will start from the point where it is stopped next time you press [Æ (play)]. If you press  
[OK] instead of [Æ (play)] playback will start from the beginning of the file instead of resuming  
from the last stop point.  
TOP MENU Go to the root directory of the file list.  
D Note  
• For the media server list, maximum of 10 servers can be displayed.  
• The system can recognize up to 9,999 files (including folders).  
• The 10th and deeper hierarchies cannot be displayed.  
• This unit supports the following formats. (Formats other than listed below cannot be recognized.)  
-Video : MPEG 1, MPEG 2 PS, MPEG 2TS /TTS  
- Music : LPCM, MP3,WMA  
- Photo : JPEG (Images over 1024 x 768 pixel are not included in the warranty specification.)  
• Unplayable files in the media server will not be displayed in the file list.  
• For some files, playback is not available even if displayed in the file list.  
• In order to play back the contents from media servers, the player and the media servers must be connected to  
the same local area network.  
• Compatibility and available playback function may differ depending on the media server.  
• If you select a photo file in step 6 on page 27, the selected photo will display and go to the next photo within 10  
seconds.  
• For photo files, every press of [Í/Æ] will turn the image by 90 degrees when an image is displayed.  
• The quality of the playback picture or sound depends on the speed/signal strength condition of your network.  
• It may take a few moments while loading a file when the unit is going to a new folder/file location during  
playback.  
9.4 Using theTitle / Disc / Pop Menu  
Some BD-videos, DVD-videos or AVCHD files may contain a title menu which describes the contents of the disc, or  
a disc menu which guides you through the available functions in the disc.  
With such discs, a title menu or a disc menu may appear automatically when you insert the disc. Otherwise, press  
[TOP MENU] or [POP MENU/MENU] to call up the menu. Refer to the disc’s manual on how to navigate through  
the menu.  
D Note  
• Menus vary among discs. Refer to the information accompanying the disc for details.  
• [TOP MENU] or [POP MENU/MENU] may not work with some discs.  
EN-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. SPECIAL PLAYBACK  
10.1 Fast Forward / Fast Reverse  
1. During playback, press [(forward)] repeatedly for different fast forward speeds.  
During playback, press [¢ (reverse)] repeatedly for different fast reverse speeds.  
2. Press [Æ (play)] to return to normal playback.  
D Note  
• For Blu-ray Disc™, DVD and AVCHD, speed changes in 5 different levels.  
• For audio CD, MP3,WMA, and video / audio files on DLNA home server’s, speed changes in 3 different levels.  
• For some video / music files on a DLNA home server, fast forward / fast reverse may not function.  
• For audio CD, MP3 and WMA, fast forward / fast reverse search between different files or tracks are not  
available.  
10.2 Slow Forward Playback  
1. During playback, press [Δ (pause)].Then press [(forward)].  
Every time you press [(forward)], the slow forward playback speed changes in 3 different levels.  
2. Press [Æ (play)] to return to normal playback.  
D Note  
• Only slow forward is available.  
• For some video files on a DLNA home server, slow forward may not function.  
• Set “Still Mode” to “Field” in “Video Out” menu if pictures in the slow forward playback mode are blurred.  
10.3 Step by Step Playback  
1. In pause mode, press [G (skip)] repeatedly.  
Every time you press [G (skip)], playback will advance one step at a time.  
2. Press [Æ (play)] or [Δ (pause)] to return to normal playback.  
D Note  
• Only step by step forward is available.  
• Set “Still Mode” to “Field” in “Video Out” menu if pictures during step by step playback mode are blurred.  
EN-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10.4 Repeat Playback  
Available repeat function varies depending on the discs.  
1. During playback, press [REPEAT].  
2. Use [Î/ï] to select the desired repeat mode.  
Repeat Mode  
Chapter Repeat  
Available Media  
The current chapter will be played back repeatedly.  
Title Repeat  
The current title will be played back repeatedly.  
Track Repeat  
The current track or file will be played back repeatedly.  
All Repeat  
All tracks in the media will be played back repeatedly.  
Group Repeat  
The current group (folder) will be played back repeatedly.  
Random Repeat (Audio CD)  
Randomly repeats tracks in playback.  
Random Repeat (MP3 / WMA / JPEG)  
Randomly repeats playback files in a folder.  
3. Press [RETURN] to exit.  
D Note  
• The repeat setting will be canceled when you stop playback.  
• When the repeat mode is set for an MP3 or WMA folder (file), the repeat setting will be canceled if you select  
another MP3 or WMA folder (file) to play back.  
• For some video / music / photo files on a DLNA home server, repeat playback may not function.  
10.5 Slide Show  
1. Follow steps 1 to 2 in “Playing Back a Disc” on page 25.  
2. Open the folder which contains the desired JPEG files.  
3. Use [Î/ï/Í/Æ] to select a desired file to be played back, then press [Æ (play)] or [OK].  
• An image will be played back from the selected file and go to the next one in turn every 10 seconds.  
4. Press [Ê (stop)] to stop playback.  
To return to the first item  
: Press [TOP MENU]  
To return to the file played last  
: Press [POP MENU/MENU]  
D Note  
• Large-size JPEG files take a few moments to be displayed.  
EN-30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10.6 PiP (BONUSVIEW™) Setting  
Some BD-videos have the PiP function which enables you to display the secondary video within the primary video.  
PiP  
1 / 8  
Primary video  
Secondary video  
1. During playback, press [MODE] to display the play menu.  
2. Use [Î/ï] to select “PiP”, then press [OK].  
• PiP information will appear.  
3. Use [Î/ï] to select the secondary video you want to show.  
• The secondary video will be displayed with the secondary audio.  
• Use [Í/Æ] to switch between current setting and “Off.  
4. Press [RETURN] to exit.  
• How to select the secondary audio output, refer to “Switching Audio Soundtrack” on page 34.  
10.7 Enjoying BD-Live™ Discs Using Internet  
You can enjoy BD-Live™ which enables you to use interactive features when the unit is connected to the Internet.  
Examples of BD-Live™ features:  
• Online access to additional content such as movie trailers, subtitles, BD-Java applications, etc.  
• While downloading, special video data may be played back.  
- Service and functions differ depending on the disc. Follow the instructions given by the disc when using the  
BD-Live™ function.  
- Insert an SD Memory Card of at least 1GB capacity before using BD-Live™ features on a Blu-ray Disc™.  
(Make sure the write-protect switch on the SD Memory Card is not enabled.)  
- Do not remove the SD Memory Card while using BD-Live™ features.  
D Note  
You must connect the unit to the Internet and set up necessary settings in order to use BD-Live™.  
• For the network connection, refer to “Connection to the Network” on page 16.  
• For the network setup, refer to “Network Connection” on page 41.  
• For certain discs, BD-Live™ setting in “Manual” Setup may need to be changed. (Refer to page 43.)  
• Depending on your connection environment, it may take a few moments to connect to the Internet or the  
Internet may not be connected. Refer to “TROUBLESHOOTING” on page 53.  
• Some discs with BD-Live™ function require memory when playing back the content. If you cannot play back a  
disc with BD-Live™ function, insert an SD Memory Card (1GB or more) which is formatted on this unit.  
Continued on next page.  
EN-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Note for AACS (Advanced Access Content System) Online  
• The player or disc IDs may be sent to the content provider when playing back a disc with BD-Live™ function.  
• If you save your viewing history on the server by using these IDs, you will be introduced to other similar movies.  
You can save game score histories.  
10.8 Title / Chapter Search  
Using [H (skip)] / [G (skip)]  
1. During playback, press [G (skip)] to skip the current title or chapter and move to the next.  
The title or chapter will move forward one at a time.  
• If there is no chapter in one title, the current title may be skipped.  
To go back to the beginning of the current title or chapter, press [H (skip)].  
Press [ H (skip)] repeatedly to go to the previous title or chapter.The title or chapter may move backward  
one at a time.  
Using [MODE]  
1. During playback, press [MODE] to display the play menu.  
2. Use [Î/ï] to select “Search”, then press [OK].  
3. Use [Î/ï] to select “TT” or “CHP”, then press [OK].  
e.g.) Blu-ray Disc™  
Search  
001 / 999  
4. Use [Î/ï/Í/Æ] to select the title / chapter number.  
5. Press [OK].  
Playback will start from the beginning of the title / chapter.  
6. Press [RETURN] to exit.  
Using [the Number buttons] (Direct Search)  
Chapter Search  
During playback, enter the chapter number you want to search using [the Number buttons]. Playback of the chapter will  
start in a few seconds.  
D Note  
• As for the BD-video, how it performs will be strongly determined by the disc, and may not perform as described.  
10.9 Track Search  
1. During playback, press [G (skip)] to skip the current track or file and move to the next.  
The track / file will move forward one at a time.To go back to the beginning of the current track / file, press  
[H (skip)].  
Press [H (skip)] repeatedly to go to the previous track / file.The track / file will move backward one at a time.  
EN-32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10.10 Time Search  
1. During playback, press [MODE] to display the play menu.  
2. Use [Î/ï] to select “Search”, then press [OK].  
• For video files on DLNA server, skip to step 3.  
3. Use [Î/ï] to select “  
”, then press [OK].  
e.g.) Blu-ray Disc™  
Search  
00:12:44 / 11:13:14  
4. Use [the Number buttons] or [Î/ï] to enter the time count you want to jump to.  
e.g.) Entering 1 hour 45 minutes and 15 seconds.  
5. Press [OK].  
Playback will start from the desired time entered.  
6. Press [RETURN] to exit.  
D Note  
• For some video files on DLNA home server, time search may not function.  
10.11 Switching Subtitles  
Some video materials may have subtitles in one or more languages. For commercially available discs, the supported  
languages can be found on the disc case. Follow the steps below to switch the subtitle language during playback.  
1. During playback, press [SUBTITLE].  
2. Use [Î/ï] to select “Primary”,Secondary” or “Style”, then press [OK].  
“Primary”  
“Secondary”  
“Style”  
: Sets the subtitle for the primary video.  
: Sets the subtitle for the secondary video.  
: Sets style of the subtitle.  
3. Use [Î/ï] to select your desired subtitle or style.  
Subtitle  
Primary  
Secondary  
Style  
1 ENG / 255  
Off  
Off  
• Use [Í/Æ] to switch between current subtitle setting and “Off.  
4. Press [RETURN] to exit.  
1. During playback, press [SUBTITLE].  
2. Use [Î/ï] to select your desired subtitle.  
Subtitle  
1 ENG / 255  
• Use [Í/Æ] to switch between current subtitle setting and “Off.  
3. Press [RETURN] to exit.  
Continued on next page.  
EN-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D Note  
• Some discs will only allow you to change the subtitles from the disc menu or pop menu. Press [TOP MENU] or  
[POP MENU/MENU] to display the disc menu or pop menu.  
• If the disc has no subtitle language or subtitle style,Not Available” will be displayed on theTV screen.  
• During playback of the secondary video, the primary subtitle setting is not available except when there is no  
subtitle for the secondary video  
.
You can also change the subtitle setting from the play menu. Play menu can be called up by pressing [MODE].  
10.12 Switching Audio Soundtrack  
When playing back video material recorded with two or more soundtracks (these are often in different audio  
languages or audio formats), you can switch them during playback. For Blu-ray Disc™, available audio varies  
depending on “BD Audio Mode” setting.  
1. During playback, press [AUDIO].  
2. Use [Î/ï] to select “Primary” or “Secondary”, then press [OK].  
“Primary”  
: Sets the audio for the primary video.  
“Secondary” : Sets the audio for the secondary video.  
3. Use [Î/ï] to select your desired audio stream channel.  
Audio  
Primary  
1 ENG Dolby D Multi-ch / 3  
1 ENG DTS Multi-ch / 3  
Secondary  
[Decoding Format] : Dolby D  
• For “Secondary”, use [Í/Æ] to switch between current audio setting and “Off.  
4. Press [RETURN] to exit.  
1. During playback, press [AUDIO].  
2. Use [Î/ï] to select your desired audio stream channel.  
Multi-ch / 3  
Audio  
1 ENG Dolby D  
[Decoding Format] : Dolby D  
• For audio CD, you can select following options.  
“Stereo”  
“L-ch”  
“R-ch”  
: Both right and left channels are active (stereo).  
: Only left channel is active.  
: Only right channel is active.  
3. Press [RETURN] to exit.  
D Note  
• The secondary audio will not be output when the secondary video is not displayed or when “BD Audio Mode” is set  
to “HD Audio Output”. (For some Blu-ray™ discs, secondary audio will be output even when secondary video is off.)  
• The sound mode cannot be changed during playback of discs not recorded in multiple audio mode.  
• Some discs allow changing the audio language setting on the disc menu. (Operation varies depending on the  
discs. Refer to the manual accompanying the disc.)  
Continued on next page.  
EN-34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• [AUDIO] may not work on some discs with multiple audio streams or channels (e.g. DVDs that allow changing  
audio setting on the disc menu).  
• If the disc has no audio language,Not Available” will be displayed on theTV screen.  
• For DTS-CD (5.1 music disc), selecting audio streams or channels are not available.  
You can also change the audio setting from the play menu. Play menu can be called up by pressing [MODE].  
10.13 Switching Camera Angles  
Some BD-videos and DVD-videos contain scenes which have been shot simultaneously from various angles.You can  
change the camera angle when  
appears on theTV screen.  
1. During playback, press [MODE] to display the play menu.  
2. Use [Î/ï] to select ”Angle”, then press [OK].  
• The selected angle will be displayed on the display bar at the top of theTV screen.  
3. Use [Î/ï] to select your desired angle.  
4. Press [RETURN] to exit.  
D Note  
• If “Angle Icon” setting is set to “Off,  
will not appear on theTV screen.  
10.14 Black Level  
You can adjust the black level setting to make the black parts of the pictures as bright as you prefer.You can select  
“On” or “Off.  
1. During playback, press [MODE] to display the play menu.  
2. Use [Î/ï] to select ”Black Level”, then press [OK].  
3. Use [Î/ï] to select your desired setting.  
e.g.) Blu-ray Disc™  
Black Level  
On  
“On”  
“Off”  
: Makes the dark parts blacker with additional contrast and brightness.  
: Shows the original picture as recorded.  
4. Press [RETURN] to exit.  
D Note  
• The setting will remain the same even if the unit is switched to standby mode.  
• “Black Level” is not effective under the following conditions.  
- When the picture is output from HDMI OUT jack.  
EN-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10.15 Noise Reduction  
Reduces the noise of the playback picture.  
1. During playback, press [MODE] to display the play menu.  
2. Use [Î/ï] to select “Noise Reduction”, then press [OK].  
3. Use [Î/ï] to select your desired setting.  
e.g.) Blu-ray Disc™  
Noise Reduction  
Off  
“On”  
“Off”  
:Activates noise reduction.  
: Deactivates noise reduction.  
4. Press [RETURN] to exit.  
D Note  
• The setting will remain the same even if the unit is switched to standby mode.  
10.16 Virtual Surround  
You can enjoy stereophonic virtual surround space through your existing 2 channel stereo system.  
1. During playback, press [MODE] to display the play menu.  
2. Use [Î/ï] to select ”Virtual Surround”, then press [OK].  
3. Use [Î/ï] to select your desired setting.  
e.g.) Blu-ray Disc™  
Virtual Surround  
Off  
“On”  
“Off”  
:Activates surround effects.  
: Deactivates surround effects.  
4. Press [RETURN] to exit.  
D Note  
• Set the virtual surround setting to “Offor lower the volume if the sound is distorted.  
• For the virtual surround, audio signal will always be 2-channel LPCM.  
EN-36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. NETWORK FEATURES  
11.1 Before Using Network Features  
Please follow the instructions below before using network features.  
1. Connect this unit to the Internet.  
• Refer to “Connection to the Network” on page 16.  
2. Set up the necessary network connection settings.  
• Refer to “Network Connection” on page 41.  
3. Press [VUDU] or [NETFLIX].  
• For the first time only,Network Service Disclaimer” screen will appear. After confirming the content, use  
[Î/ï] to select “Agree”, then press [OK].  
4. Press [HOME] to exit.  
D Note  
You can also use network features from the home menu screen. Select “NET APP” in the home menu, then  
select the desired features.  
11.2 Information on Network Services  
For detailed information on 3rd party Internet services, please visit the service provider’s website:  
Support number : 1-866-716-0414  
Support number : 1-888-554-VUDU (8838)  
E-mail support : [email protected]  
EN-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12. LIST OF SETTINGS  
In the setup menu, you can customize various kinds of settings as you prefer. Refer to the following instructions to  
navigate through the setup menu.  
1. Press [HOME] to access the home menu.  
2. Use [Î/ï/Í/Æ] to select “Settings”, then press [OK].  
3. Use [Î/ï] to select the desired Category, then press [OK].  
4. Use [Î/ï] to move up and down the list to select Menus / Option.  
5. To make a selection or to access options of an item, select the desired item, then press [OK].  
To go back to the previous screen, press [RETURN].  
6. Press [HOME] to exit.  
Refer to the following table for the types of settings you can customize.  
The item highlighted in gray is the default setting.  
Category  
Video Out  
Menus / Options  
4:3 Letter Box  
4:3 Pan & Scan  
16:9 Wide  
16:9 Squeeze  
Auto  
TV Aspect  
Progressive Mode  
Still Mode  
Video  
Auto  
Field  
Frame  
Audio Out  
Network  
DRC  
Auto  
On  
Off  
Mix Audio Output  
HD Audio Output  
Start  
BD Audio Mode  
Network Connection  
ConnectionTest  
Network Status  
Wireless Status  
Disclaimer  
Netflix ESN  
Deactivation  
Netflix  
VUDU  
On  
HDMI  
fun-Link (HDMI CEC)  
Video Resolution  
Deep Color  
Off  
Auto  
480p  
Auto  
Off  
Audio Output  
Bitstream  
LPCM  
Off  
Continued on next page.  
EN-38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Category  
Menus / Options  
Auto(English)  
English  
Español  
Français  
Original  
Bulgarian  
Chinese  
Czech  
Playback  
Language  
Audio  
Italian  
Japanese  
Korean  
Norwegian  
Polish  
Danish  
Dutch  
English  
Finnish  
French  
German  
Greek  
Hungarian  
Icelandic  
Irish  
Portuguese  
Romanian  
Russian  
Slovak  
Spanish  
Swedish  
Turkish  
Other  
Subtitle  
Off  
Bulgarian  
Chinese  
Czech  
Danish  
Dutch  
Italian  
Japanese  
Korean  
Norwegian  
Polish  
English  
Finnish  
French  
German  
Greek  
Hungarian  
Icelandic  
Irish  
Portuguese  
Romanian  
Russian  
Slovak  
Spanish  
Swedish  
Turkish  
Other  
Disc Menu  
Bulgarian  
Chinese  
Czech  
Danish  
Dutch  
Italian  
Japanese  
Korean  
Norwegian  
Polish  
English  
Finnish  
French  
German  
Greek  
Hungarian  
Icelandic  
Irish  
Portuguese  
Romanian  
Russian  
Slovak  
Spanish  
Swedish  
Turkish  
Other  
BD Rating Level  
Off  
Age Setting  
Continued on next page.  
EN-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Category  
Menus / Options  
Off  
Playback  
DVD Rating Level  
8 [Adult]  
7 [NC-17]  
6 [R]  
5 [PGR]  
4 [PG-13]  
3 [PG]  
2 [G]  
1 [Kid Safe]  
Password Change  
Angle Icon  
On  
Off  
Others  
Software Update  
Disc  
Network  
SD Memory Card  
Automatically check for latest On  
software  
Quick Start Mode*  
Off  
On  
Off  
Product Info  
Initialize  
Reset Settings  
Format SD Memory Card  
(Unit) Erase Saved BD-ROM Data  
(SD Memory Card) Erase Saved BD-ROM Data  
Reset Network Settings  
OSS  
* When “Quick Start Mode” is set to “On”, power consumption during standby mode will increase.  
EN-40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13. SETUPS  
13.1 Network Connection  
[HOME]  
“Settings”  
“Network”  
“Network Connection”  
Set up network connection settings in order to use BD-Live™, DLNA home media server, Netflix /VUDU or  
network update function.  
Connection Test  
After you enable a network connection or change the network settings, always perform the connection test to  
check if the connection is correctly made.  
1. Use [Î/ï/Í/Æ] to select “Settings” in the home menu, then press [OK].  
2. Use [Î/ï] to select “Network”, then press [OK].  
3. Use [Î/ï] to select “Network Connection”, then press [OK].  
4. Use [Î/ï] to select “ConnectionTest”, then press [OK].  
• Connection test will start automatically and the test result will appear right after the connection test finishes.  
“Connecting...”  
“Pass”  
“Failed”  
:The test is in progress.  
: Network connection succeeds.  
: Network connection failed.  
5. If the connection test passes, press [OK].  
D Note  
• If the connection test passes, you are ready to use BD-Live™, DLNA home media server, Netflix /VUDU or network  
update function, using the Internet without making any additional settings.  
• If the connection test fails, you may need to check your router settings and make sure the physical connection  
is secure. If you need the MAC address of this unit to complete your router settings you can view it on the  
“Network Status” / “Wireless Status” screen (refer to page 46).  
• When connecting this unit directly to a modem for the first time or connecting it to a modem which was  
previously connected to any other network device (e.g. a router, PC, etc.), you may have to power cycle the  
modem (unplug the modem’s and/or router’s AC plug from its AC outlet for 30 seconds and then plug it back  
in), this may reset the settings in the modem.  
If you have a telephone/Internet modem with your cable service then you may have to use its reset button or  
remove the backup battery to reset this type of modem.  
Wired  
Select “Wired” if you made a wired connection and set it to “Auto”(wired) or “Manual”(wired), in accordance with  
your network environment.  
Auto (Wired)  
Select “Auto” to set the network setting automatically.  
1. Use [Î/ï/Í/Æ] to select “Network Setup” in the home menu, then press [OK].  
2. Use [Î/ï] to select “Wired”, then press [OK].  
3. Use [Î/ï] to select “Auto”, then press [OK]  
.
• The unit will start the connection test automatically and the test result will appear right after the test finishes.  
Continued on next page.  
EN-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Select “End” to activate the network settings and set the network connection automatically.  
Manual (Wired)  
In the following cases, select “Manual”(wired) to set each setting as necessary.  
- When connection test failed with the setting of “Auto”(wired).  
- When instructed by your Internet service provider to make specific settings in accordance with your network  
environment.  
1. Follow steps 1 to 2 in “Auto (Wired)” on page 41.  
2. Use [Î/ï] to select “Manual”, then press [OK]  
.
3. Use [Î/ï] to select “IP Address”, then press [OK].  
4. IP address setting screen will appear. Enter IP address with cursor buttons and number buttons.  
Network Settings (Manual)  
IP Address  
Please input the IP Address.  
0
.
0
.
0
.
0
Ne
Back Clear OK  
Cancel  
5/7  
• Enter the IP address after checking the specifications of your router.  
• If the IP address is unknown, check the IP address of other devices. (e.g. PC connected via LAN cable) and  
assign a different number from those other devices.  
5. Use [Î/ï/Í/Æ] to select “OK”, then press [OK].  
6. Select “Subnet Mask”,Default Gateway”,Primary DNS” and “Secondary DNS” in turn, and enter each address  
number with cursor buttons and number buttons, then press [OK].  
• Enter the DNS addresses provided by your Internet provider.  
• If the DNS address is unknown, check the DNS address of other devices (e.g. PC connected via LAN cable)  
and assign the same DNS address.  
Network Setting s (Manual)  
Please enter your network settings.  
IP Address  
:
:
:
:
:
xxx. xxx. xxx. xxx  
xxx. xxx. xxx. xxx  
xxx. xxx. xxx. xxx  
xxx. xxx. xxx. xxx  
xxx. xxx. xxx. xxx  
Subnet Mask  
Default Gateway  
Primary DNS  
Secondary DNS  
Next  
Cancel  
5/7  
7. Use [Î/ï/Í/Æ] to select “OK”, then press [OK].  
8. Use [Î/ï/Í/Æ] to select “Next”, then press [OK].  
9. Use [Î/ï] to select “Yes” or “No” for proxy server, then press [OK].  
• If you use proxy server, select “Yes” to go to the next step.  
• If you do not use proxy server, select “No” to go to step 13.  
Continued on next page.  
EN-42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Proxy address setting screen will appear. Enter proxy address with cursor buttons, number buttons and color key.  
Network Setting(Manual)  
Please input the Proxy Address with software keyboard.  
1
a
h
u
2
b
l
3
c
m
w
4
d
n
x
5
e
o
y
6
f
p
z
7
g
q
.
8
h
r
-
9
i
0
j
SP  
a/A/@  
CLR  
s
t
-
-
v
<
>
Done  
Done  
Cancel  
Clear  
a/A/@  
5/7  
: Used to move through the menu.  
[Î/ï/Í/Æ]  
[the Number buttons] : Enter number (remote control).  
[OK]  
: Enter the selected setting.  
[RED]*  
: Confirm and set the enter network setting.  
: Exit / Cancel network setting.  
[GREEN]  
[BLUE]  
: Clear the enter number or letters.  
[YELLOW]*  
: Switch between different characters abc (lower case),ABC (uppercase),and @!?  
(special characters).  
* These buttons can be used in other network settings.  
11. Press [RED] to go to the proxy port setting screen. Enter proxy port number with number buttons.  
Network Settings (Manual)  
Proxy Port  
Please input the Proxy Port.  
xxxxx  
Cancel Clear OK  
Cancel  
5/7  
12. Use [Î/ï/Í/Æ] to select “OK”, then press [OK].  
13. Connection speed setting screen will appear. Use [Î/ï] to select the desired setting, then press [OK]. (The  
default setting is “Auto”.)  
14. BD-Live™ setting screen will appear. Use [Î/ï] to select the desired setting, then press [OK].  
(The default setting is “Allow”.)  
“Allow”  
: Internet access is permitted for all BD-Live™ contents.  
“Limited Allow” : Internet access is permitted only for BD-Live™ contents which have content owner  
certificates. Internet access without the certificates is prohibited.  
“Prohibit”  
: Internet access is prohibited for all BD-Live™ contents.  
15. Connection test confirmation screen will appear. Select “Yes” to start the connection test and the test result will  
appear right after the connection test finishes.  
16. Select “End” to complete the settings.  
Continued on next page.  
EN-43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D Note for “IP Address”,“Subnet Mask”,“Default Gateway”,“Primary DNS” and “Secondary DNS”  
• The range of input numbers is between 0 and 255.  
• If you enter a number larger than 255, the number will automatically be 255.  
• When you enter a wrong number, select “Clear” to clear. (The number will be back to “0”.)  
• If you want to enter a 1 or 2-digit number in one cell, press [Æ] to move on to the next digit’s in the cell.  
D Note for “Proxy Address” and “Proxy Port”  
• The range of input numbers for the port number is between 0 and 65535. (If you enter a number larger than  
65535, it will be regarded as 65535.)  
• For proxy port, certain ports might be closed, blocked or unusable depending on your network environment.  
• Choose a connection speed in accordance with your network environment.  
• When the settings are changed, the network connection may be disabled depending on the device.  
Wireless  
If you connect this unit to a wireless network, select “Wireless” and set up necessary settings.  
Please make a note of your wireless network name and its WEP / WPA / WPA2 key before proceeding with the setup.  
Auto Scan (Wireless)  
1. Use [Î/ï/Í/Æ] to select “Network Setup” in the home menu, then press [OK].  
2. Use [Î/ï] to select “Wireless”, then press [OK].  
3. Use [Î/ï] to select “Auto Scan”, then press [OK]  
.
• This unit will start searching for wireless networks automatically.  
4. The result of wireless network searching will be displayed. Use [Î/ï] to select the appropriate wireless network  
name (SSID), then press [OK].  
• If you select an SSID with “ ”, please go to step 6.  
Access Point Setting (Auto Scan)  
Please select the access point.  
Access 1  
Access 2  
Access 3  
Retry  
Cancel  
3/7  
5. “WEP/WPA Key” entry screen will appear. Enter the WEP / WPA password of the selected wireless network  
using cursor buttons, number buttons and color keys, then press [RED] to confirm the password.  
• If you do not know the WEP / WPA / WPA 2 key for your wireless network, please confirm the sticker on the  
router.  
Access Point Setting(Auto Scan)  
Please input the WEP/WPA Key with software keyboard.  
XXXXXXX  
1
a
h
u
2
b
l
3
c
m
w
4
d
n
x
5
e
o
y
6
f
p
z
7
g
q
.
8
h
r
-
9
i
s
0
j
t
SP  
a/A/@  
CLR  
v
Done  
Done  
Cancel  
Clear  
a/A/@  
3/7  
Continued on next page.  
EN-44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Use [Î/ï] to select “Next”, then press [OK].  
Access Point Setting (Auto Scan)  
Please confirm the setting.  
SSID  
: Access 1  
: XXXXX  
Security  
WEP/WPA Key : XXXXXXX  
Next  
Retry  
Cancel  
3/7  
7. Use [Î/ï] to select “Auto” or “Manual”, then press [OK].  
• If you select “Auto”:  
Follow step 4 in “Auto (Wired)” on page 41.  
• If you select “Manual”:  
Follow steps 3 to 12 and 14 to 16 in “Manual (Wired)” on page 42.  
D Note  
• The internal wireless LAN supports following specifications.  
- Wireless standards  
- Frequency  
: IEEE 802.11 b/g/n  
: 2.4 GHz  
- Security protocol  
:WEP / WPA / WPA2  
Manual (Wireless)  
Set up the connection to the wireless router manually by entering the wireless network name (SSID).  
In the following cases, select “Manual”(wireless) to set each setting as necessary.  
- When connection test failed with the setting of “Auto Scan”(wireless).  
1. Follow steps 1 to 2 in “Auto Scan (Wireless)” on page 44.  
2. Use [Î/ï] to select “Manual”, then press [OK]  
.
3. Wireless router name (SSID) entry screen will appear. Enter the wireless network name (SSID) using cursor  
buttons, number buttons and color key, then press [RED].  
4. Security mode select screen will appear. Select the desired security mode, then press [OK].  
• If you select “None”, please go to step 6.  
Network Settings (Manual)  
IP Address  
Please input the IP Address.  
0
.
0
.
0
.
0
Ne
Back Clear OK  
Cancel  
5/7  
5. “WEP/WPA Key” entry screen will appear. Enter the WEP / WPA / WPA2 key of the selected wireless network  
using cursor buttons, number buttons and color key, then press [RED].  
• If you do not know the WEP / WPA / WPA 2 key for your wireless network, please confirm the sticker on the  
router.  
6. Use [Î/ï] to select “Next”, then press [OK]  
.
Continued on next page.  
EN-45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Use [Î/ï] to select “Auto” or “Manual”, then press [OK]  
.
• If you select “Auto”:  
Follow step 4 in “Auto (Wired)” on page 41.  
• If you select “Manual”:  
Follow steps 3 to 12 and 14 to 16 in “Manual (Wired)” on page 42.  
Easy Connect  
You can set up the wireless connection quickly.  
(“Easy Connect (WPS)” (Wi-Fi Protected Setup) is available only when your router supports it. For details, please  
refer to the user manual of your wireless router.)  
Push Button Method  
Please confirm your wireless router has a PBC (Push Button Configuration) button.  
1. Follow steps 1 to 2 in “Auto Scan (Wireless)” on page 44.  
2. Use [Î/ï] to select “Easy Connect (WPS)”, then press [OK]  
.
3. Use [Î/ï] to select “Push Button Method”, then press [OK]  
.
And push the PBC button on your wireless router.  
• The unit will start the connection test automatically and the test result will appear right after the connection  
test finishes.  
Access Point Setting(Easy Connect)  
Push Button Method  
Please push the PBC(push button configuration) on  
the wireless router and selected ‘Push Button Method’  
button on screen.  
PIN Code Method  
Please input the PIN number into the wireless  
router and select ‘PIN Code Method’ button on  
screen.  
PIN Code is  
:
xxxxxxx  
Cancel  
2/7  
4. Select “End” to complete the settings.  
PIN Code Method  
1. Follow steps 1 to 2 in “Auto Scan (Wireless)” on page 44.  
2. Use [Î/ï] to select “Easy Connect (WPS)”, then press [OK]  
.
3. Set up your wireless router with PIN code shown on theTV screen.  
• For details about setting method of your wireless router, please refer to the user manual of the router.  
4. Use [Î/ï] to select “PIN Code Method”, then press [OK]  
.
5. This unit will start connecting to the wireless network automatically and the test result will appear right after the  
connection test finishes.  
6. Select “End” to complete the settings.  
Network Status / Wireless Status  
You can check the current status of network status and wireless status.  
1. Follow steps 1 to 2 in “ConnectionTest” on page 41.  
2. Use [Î/ï] to select “Network Status” or ”Wireless Status”, then press [OK]  
.
• The current network settings or wireless router setting will be displayed.  
3. Press [HOME] to exit.  
Continued on next page.  
EN-46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Netflix ESN  
You can view the ESN number which is a serial number used by Netflix to identify a device. Netflix customer  
service might ask you for this number during troubleshooting.  
1. Follow steps 1 to 2 in “ConnectionTest” on page 41.  
2. Use [Î/ï] to select “Netflix ESN”, then press [OK]  
.
3. Press [HOME] to exit.  
13.2 fun-Link (HDMI CEC)  
[HOME]  
“Settings”  
“HDMI”  
“fun-Link (HDMI CEC)”  
fun-Link (HDMI CEC) allows integrated system control over HDMI and is part of the HDMI standard.This function  
may not work properly depending on the device connected to the unit.When “fun-Link (HDMI CEC)” setting is set  
to “On” functions listed below will be available.  
One Touch Play  
fun-Link (HDMI CEC) operations are performed using remote control buttons.TheTV will automatically be turned  
on and switched to the appropriate video source Input signal.  
Buttons for one touch play:  
- [Æ (play)], [H (skip)], [G (skip)], [the Number buttons], [HOME] or [DISPLAY]  
-
[TOP MENU] or [POP MENU / MENU] (when a disc is inserted in the unit)  
One Touch Standby  
When you press and hold [STANDBY/ON .] for 2 seconds, it will turn off the power to theTV first and then  
turn off the power to this unit.  
When the connected fun-Link (HDMI CEC) compatible display device is turned off first, this unit will be turned off  
subsequently.  
System Information  
Get & Set Menu Language  
The unit recognizes the OSD language set on theTV and automatically sets the same language as the player menu  
language (OSD menu language) for this unit. Refer to the “Language” on page 39 for available languages.  
• This feature is available only when “Auto” is selected in the “Language” section in the setup menu.  
13.3 HDMIVideo Resolution  
[HOME]  
“Settings”  
“HDMI”  
“Video Resolution”  
Set the resolution of the video signal being output from the HDMI OUT jack.  
You can select the desired “Video Resolution” among the settings listed below:Auto”,“480p”.  
Continued on next page.  
EN-47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Actual Output Resolution:  
Source  
1080i/60  
480p/60  
Setting in the  
Video Resolution”  
480i/60  
720p/60  
720p/24  
1080p/24  
480p  
Auto  
The highest resolution supported by your display device will be automatically in effect.  
Composite video output (VIDEO OUT) jack can only output 480i/60.  
• For AVCHD, outputting the video in 24 frames per second (1080p/24) is not available.  
D Note  
• The selected resolution must also be supported by your display device.  
• If yourTV and the unit is connected by a DVI cable and if you select “Auto”,480p” will be automatically in effect.  
• Refer also to yourTV’s manual.  
• When connected to an HDCP incompatible display device, the picture will not be displayed properly.  
• The audio signals from the HDMI OUT jack (including the sampling frequency, the number of channels and bit  
length) may be limited by the connected device.  
• Among the display device(s) that support HDMI, some do not support audio output (for example, projectors).  
While connected to a device such as a projector, audio will not be output from the HDMI OUT jack.  
• When this unit’s HDMI OUT jack is connected to a DVI-D compatible display device(s) (HDCP compatible)  
with an HDMI-DVI converter cable, the signals are output in digital RGB.  
• HDMI video resolution does not work during the playback of a BD-video.  
Copyright protection system  
To play back the digital video images of a BD-video or DVD-video via an HDMI connection, it is necessary that  
both the player and the display device (or an AV receiver / amplifier) support a copyright protection system called  
HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that comprises  
data encryption and authentication of the connected AV device.This unit supports HDCP. Please read the  
operating instructions of your display device (or an AV receiver / amplifier) for more information.  
13.4 Parental  
Some BD-videos or DVD-videos feature parental lock levels. Playback will stop if the ratings exceed the levels you set,  
it will require you to enter a password before the disc will play back.This feature prevents your children from viewing  
inappropriate material.  
1. Use [the Number buttons] to enter your 4-digit password.  
For first time use: Use [the Number buttons] to enter any 4-digit number (except for 4737).That number will  
be used as the recover password. Record your password, in case you might forget it.  
• If you forget the password, enter [4], [7], [3], [7].The password will be cleared and rating level will be set to “Off.  
• When you input the password, select “Clear” to clear the number, then re-enter the password.  
BD Rating Level  
[HOME]  
“Settings”  
“Playback”  
“BD Rating Level”  
1. Use [Î/ï/Í/Æ] to select “Settings” in the home menu, then press [OK].  
2. Use [Î/ï] to select “Playback”, then press [OK].  
Continued on next page.  
EN-48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Use [Î/ï] to select “BD Rating Level”, then press [OK].  
4. Use [the Number buttons] to enter your 4-digit password.  
5. Use [Î/ï] to select your desired option, then press [OK].  
“Off”  
“Age Setting”  
:To release the limitation.  
:To set the age limitation.  
• After selecting “Age Setting”, use [the Number buttons] to enter the age.  
(e.g., For age 6, enter [6] + [OK].  
For age 15, enter [1] + [5] + [OK].)  
6. Press [HOME] to exit.  
DVD Rating Level  
[HOME]  
“Settings”  
“Playback”  
“DVD Rating Level”  
1. Use [Î/ï/Í/Æ] to select “Settings” in the home menu, then press [OK]  
2. Use [Î/ï] to select “Playback”, then press [OK]  
3. Use [Î/ï] to select “DVD Rating Level”, then press [OK]  
4. Use [the Number buttons] to enter your 4-digit password.  
.
.
.
5. Use [Î/ï] to select your desired level, then press [OK]  
.
6. Press [HOME] to exit.  
RATING EXPLANATION  
Off  
:Parental Control is inactive; all discs can be played back.  
8 [Adult]  
7 [NC-17]  
6 [R]  
:DVD software of any grades (adult / general / children) can be played back.  
:No one under 17.  
:Restricted; under 17.  
5 [PGR]  
4 [PG-13]  
3 [PG]  
2 [G]  
:Parental guidance recommended.  
:Unsuitable for children under 13.  
:Parental guidance suggested.  
:General audience.  
1 [Kid Safe] :Suitable for children.  
Password Change  
[HOME]  
“Settings”  
“Playback”  
“Password Change”  
1. Use [Î/ï/Í/Æ] to select “Settings” in the home menu, then press [OK]  
2. Use [Î/ï] to select “Playback”, then press [OK]  
3. Use [Î/ï] to select “Password Change”, then press [OK]  
.
.
.
4. Use [the Number buttons] to enter your current 4-digit password.  
5. Use [the Number buttons] to enter a new 4-digit password.  
6. Use [the Number buttons] to re-enter the same new 4-digit password.  
7. Use [Í/Æ] to select “OK”, then press [OK].  
8. Press [HOME] to exit.  
Continued on next page.  
EN-49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To cancel parental lock temporarily :  
Some discs allow you to cancel parental lock temporarily.With these discs, the message below will appear when you  
try to play them back.Enter current password.”  
Follow the instruction which appears on theTV screen to cancel parental lock.  
13.5 Software Update  
[HOME]  
“Settings” “Others”  
“Software Update”  
This unit lets you update the software yourself using a software update disc, SD Memory Card or Internet.  
The available discs are below:  
- BD-RE/-R  
- DVD-RW/-R  
- CD-RW/-R  
Disc / SD Memory Card Update  
You can update the software by using a disc or SD Memory Card.  
Prepare a disc or SD Memory Card for software update:  
PC by following the directions described on the website.  
• Use a blank disc or SD Memory Card and download one software per disc and SD Memory Card. Write the  
software to disc’s or card’s root directory.  
• For more details on how to download the software, please refer to the website.  
1. Use [Î/ï/Í/Æ] to select “Settings” in the home menu, then press [OK].  
2. Use [Î/ï] to select “Others”, then press [OK].  
3. Use [Î/ï] to select “Software Update”, then press [OK].  
4. Use [Î/ï] to select “Disc” or “SD Memory Card”, then press [OK].  
5. Use [Í/Æ] to select “Yes”, then press [OK].  
6. Insert the disc or SD Memory Card for software update.  
7. After loading disc or SD Memory Card, confirmation message will appear. Select “Yes” and press [OK].  
8. The unit will restart automatically, then software update will start.  
• It may take a while to complete the updating.  
9. After the update finishes, this unit will restart. Remove the disc or SD Memory Card from the unit.  
C Caution  
• Please do not unplug the AC power cord, eject the disc or SD Memory Card or press [STANDBY/ON .] to  
turn the unit to standby mode while using the “Disc / SD Memory Card Update”.  
D Note  
• All settings will remain the same even if you update the software version.  
• The version of Netflix will also be updated if a newer version of Netflix is available when updating the software.  
Continued on next page.  
EN-50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Update  
You can update the software by connecting the unit to the Internet.  
1. Follow steps 1 to 3 in “Disc / SD Memory Card Update” on page 50.  
2. Use [Î/ï] to select “Network”, then press [OK].  
3. Use [Í/Æ] to select “Yes”, then press [OK].  
• This unit will then start checking for the latest software version.  
4. Confirmation message will appear. Select “Yes”, then press [OK].  
5. The unit will restart automatically, then software update will start.  
• The unit will start downloading the latest software version.  
6. When the download completes, confirmation message will appear. Press [OK].  
• The unit will start updating the software version.  
• It may take a while to complete the updating.  
7. After updating finishes, this unit will restart automatically.  
C Caution  
• Please do not unplug the AC power cord, LAN cable, wireless modem / router or press [STANDBY/ON .] to  
turn the unit to standby mode while using the “Network Update”.  
D Note  
• In order to update the software via the Internet, you must connect the unit to the Internet and set up necessary  
settings.  
• For the network connection, refer to “Connection to the Network” on page 16.  
• For the network setup, refer to “Network Connection” on page 41.  
• All settings will remain the same even if you update the software version.  
• The version of Netflix will also be updated if a newer version of Netflix is available when updating the software.  
EN-51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13.6 Initialize  
[HOME]  
“Settings”  
“Others”  
“Initialize”  
Menus to reset player settings, format SD Memory Card, local storage and clear network settings.  
1. Use [Î/ï/Í/Æ] to select “Settings” in the home menu, then press [OK].  
2. Use [Î/ï] to select “Others”, then press [OK].  
3. Use [Î/ï] to select “Initialize”, then press [OK].  
4. Use [Î/ï] to select the desired setting, then press [OK].  
“Reset Settings”:  
All the settings except for the parental and network settings will be reset to default.  
“Format SD Memory Card” (Available only when an SD Memory Card is inserted):  
Initialize the SD Memory Card.  
“(Unit) Erase Saved BD-ROM Data”:  
Clears the data saved for the BD-ROM contents, such as BD-ROM game scores, on this player.  
“(SD Memory Card) Erase Saved BD-ROM Data” (Available only when an SD Memory Card is inserted.):  
Clears the supplemental data for the BD-ROM playback, such as subtitle data, from the SD Memory Card.  
“Reset Network Settings”:  
Resets the network setting to the default.  
5. Use [Í/Æ] to select “Yes”, then press [OK].  
6. Confirmation message will appear. Press [OK] to complete the setting.  
7. Press [HOME] to exit.  
C Caution  
• Do not remove the SD Memory Card while executing the “Format SD Memory Card” or “(SD Memory Card)  
Erase Saved BD-ROM Data”. It will damage the card.  
D Note  
• “Format SD Memory Card” or “(SD Memory Card) Erase Saved BD-ROM Data” is not available when a Blu-ray  
Disc™ is in the unit.  
EN-52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14. TROUBLESHOOTING  
Problem  
Tip  
No power.  
Check the power cord, if it is properly connected.  
Try another power outlet.  
Unplug the power cord, and wait for about 5-10 seconds. Plug it back in and  
attempt to power on the unit.  
No sound or picture.  
Make sure both theTV and Blu-ray Disc™ player are turned on.  
Confirm the connections to theTV are connected properly as shown in the  
connection page.  
Check whether the connectedTV or other device supported HDCP. (This  
unit will not output a video signal unless the other device supports HDCP.)  
If the player is set on a high resolution output, that is not supported by the  
TV, the picture may not appear. Press and hold [ÆÆPLAY] on the front panel  
for 5 seconds to change back to default output.  
No reaction to the remote control. Confirm that the player’s power cord is plugged into a power outlet.  
Check the batteries, and make sure they are inserted properly by + or - symbols.  
Aim the remote at the unit’s remote receiver.Then press any arrow key and  
confirm the STANDBY/ON indicator dims and blinks when a remote button  
is pushed.This confirms that unit is receiving the remote IR signal.  
No audio / video signal on the  
display device via HDMI cable.  
If the unit is connected to a non certified HDMI device, the audio / video  
signal will not output on that device.  
Make sure the display device is on the correct input / video channel.  
Perform the HDMI hotplug: Disconnecting the HDMI cable from the display  
device, turn on both devices, and replug the HDMI cable back in.  
Check with theTV manufacturer, if there are any software updates available  
for theTV.  
Check if the HDMI cable is a certified version.  
No high-definition video signal on  
theTV screen.  
Does the disc contain high-definition video? High-definition video is not  
available when the disc does not contain it.  
Does theTV support high-definition video? High-definition video is not  
available when theTV does not support it.  
No audio signal from surround  
system of the audio system.  
Make sure the audio system is turned on.  
Check the input mode on the audio system if it is on the correct channel.  
Check if the surround system is compatible with either Bitstream or LPCM. If  
not sure please check the user manual or contact the surround manufacturer.  
Once confirmed check the setting in the step menu of the unit.  
Increase the volume level of the surround system.  
Distorted picture.  
Sometimes a small amount of picture distortion may appear.This is not a  
malfunction.  
Connect this unit directly to theTV. If the audio / video cables are connected  
to aVCR, pictures may be distorted due to theVCR copyright protection  
system.  
Completely distorted picture or  
black / white picture with Blu-ray  
Disc™ / DVD.  
Make sure the disc is compatible with this unit.  
Continued on next page.  
EN-53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Tip  
No sound or distorted sound.  
Adjust the volume.  
Check if speakers are connected correctly.  
Check the HDMI connections.  
Make sure the HDMI cable is not plugged into the HDMI-DVITV connector  
which does not allow audio to be received by theTV set.  
Check the settings in “Audio Out” menu.  
Picture freezes momentarily during Check the disc for fingerprints / scratches and clean with a soft cloth wiping  
disc playback.  
from center to outer edge.  
Cannot play back a disc.  
Make sure that the product supports the disc.  
Check the region code of the disc.This unit supports the following region codes.  
-Blu-ray Disc™ :A”  
-DVD :ALL” or “1”  
Clean the disc.  
SD Memory Card cannot be read. The format of the card is not accepted by this unit or the card is not compatible.  
Cannot play back JPEG files from a disc. Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.  
Cannot play back MP3 files from a Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.  
disc.  
Make sure that the bit rate of the MP3 files is between 112 and 320 kbps.  
Make sure that the sample rate of the MP3 files is 32 kHz, 44.1 kHz or 48 kHz.  
Cannot play back WMA files from a disc. Make sure that the sample rate of the WMA files is 44.1 kHz or 48 kHz.  
No return to start-up screen when Soft reset this unit by turning it off for 30 seconds, then on again.  
disc is removed.  
To completely reset the unit, press and hold [. STANDBY/ON] on the  
front panel for 10 seconds to shut down the unit or unplug the AC cord  
from the AC outlet for 5-10 seconds.  
The unit does not respond to the  
remote control.  
Aim the remote control directly at infrared sensor window on the front  
panel. (Refer to page 12)  
Reduce the distance to infrared sensor window.  
Check the +/– polarity of the batteries and replace both batteries in the  
remote control if required.  
Go to “IR Signal Check” on page 60.  
The current operation is not possible.  
in the upper right hand corner  
of theTV screen.  
Buttons do not work or the unit  
stops responding.  
To soft reset the unit, press and hold [. STANDBY/ON] on the front  
panel for 10 seconds to shut down the unit or to hard reset the unit by  
unplugging the AC cord from the AC outlet for 5-10 seconds.  
The unit does not respond to some Operations may not be permitted by the disc. Refer to the instructions for  
operating commands during playback. the disc.  
The unit cannot read Blu-ray Disc™ Condensation? (Let sit 1 or 2 hours)  
/ DVD/ CD.  
Check if the disc is compatible with this unit. (Refer to page 19.)  
Wipe dirt off the disc from the center to the outside or replace the disc.  
Refer to “Cleaning Discs” on page 60.  
Scene shooting angle does not  
switch.  
Playback does not start when the  
title is selected.  
The angle cannot be switched for Blu-ray Disc™ / DVD which do not contain  
multiple angles. In some cases multiple angles are only recorded for specific scenes.  
Check the settings in “Parental” menu.  
The password for rating level has  
been forgotten.  
Enter the default password “4737”, then your forgotten password will be  
cleared.Then to change password go to “Password Change” on page 49.  
Continued on next page.  
EN-54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Tip  
Cannot find a JPEG file.  
Make sure that the selected group (folder) does not contain more than 9,999  
files for Blu-ray Disc™ / DVD / SD Memory Card, and 999 files for CD.  
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.  
Cannot find an MP3 and WMA file. Make sure that the selected folder does not contain more than 9,999 files  
for Blu-ray Disc™ / DVD / SD Memory Card, and 999 files for CD.  
Make sure that the file extension is .mp3 or .MP3 for MP3, and .wma or  
.WMA for Windows Media™ Audio.  
Error message appears when I  
select “Auto” in the “Language”.  
Make sure that the unit is connected to a MAGNAVOX brand fun-Link  
(HDMI CEC)TV and the “fun-Link (HDMI CEC)” is set to “On”.  
This error message may appear when yourTV’s OSD language is not  
supported by this unit.  
Cannot play back AVCHD file.  
Cannot connect to the network.  
This unit cannot play back stand-alone AVCHD files (*.m2ts, *.mts or *.m2t)  
written to a DVD or copied to an SD Memory Card.The DVD or SD  
Memory Card containing AVCHD files must have a proper file and folder  
structure meeting AVCHD format specifications.  
Please use AVCHD compliant device / software to burn or copy AVCHD  
files to DVD or SD Memory Card. (Please refer to user manuals of the  
device / software for more information.)  
Check to see if there is power on the modem / router.  
Confirm, if the Internet light is showing activity (light blinking) on the modem  
/ router.  
Check network settings on the unit.  
Power cycle the modem’s and/or router’s AC plug from its AC outlet for 30  
seconds and then plug it back in, then try reconnecting cords. If you have  
a telephone/Internet modem with your cable service then you may have  
to use its reset button or remove the backup battery to reset this type of  
modem. Now wait for the lights to show activity and try reconnecting.  
Check the cables connected the router.  
Turn on the DHCP function on the router.  
Cannot use the wireless connection. Once you have activated the wireless connection please wait 30 seconds for the  
connection to be established after turning on the unit, before trying to access network  
features such as BD-Live™, DLNA home network server, Netflix andVUDU.  
Cannot connect to the network while Check the content of your Internet service contract to see if your Internet  
my PC is connected to the network. Service Provider prevents multiple terminals connecting at the same time.  
The capacity of the SD Memory  
Card decreased.  
Data may be written to the SD Memory Card when a BD-video that  
supports the virtual package is used and an SD Memory Card is in the slot.  
MPEG-2 video and audio on the SD MPEG-2 is non-compliant on this unit.  
Memory Card cannot be played back.  
The contents of the card cannot be The card is not compatible or the contents on the card may be damaged.  
read.  
Turn off and then turn the unit on again.  
To soft reset the unit, press and hold [. STANDBY/ON] on the front  
panel for 10 seconds to shut down the unit or to hard reset the unit by  
unplugging the AC cord from the AC outlet for 5-10 seconds.  
Cannot use the BD-Live™ function Insert an SD Memory Card before inserting the disc.  
or download of data does not  
perform properly.  
Insert an SD Memory Card with enough capacity (1GB or more).  
Check if an SD Memory Card is correctly inserted.  
Make sure the write-protect switch on the SD Memory Card is not enabled.  
Continued on next page.  
EN-55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Tip  
Cannot play back BD-video  
(BD-ROM Profile 2.0).  
Insert an SD Memory Card (1GB or more) which is formatted on this unit. Some  
discs with BD-Live™ function require memory when playing back the content.  
Do not remove the card during playback.  
Make sure the write-protect switch on the SD Memory Card is not enabled.  
Folder or files stored on DLNA home Check the setting on your home media server. (Refer to the user manual of  
media server are not displayed in the the home media server.)  
file list or cannot be played back.  
Check the network connection and settings.  
Cannot use Netflix feature.  
Netflix is available only in the United States.  
Check if the network connection is properly made.  
Visit netflix.com/magnavox on your PC and become a Netflix member.  
Cannot add movies orTV episodes Visit netflix.com on your PC.  
to the instant Queue.  
You may add from the player or visit netflix.com and login to your account by web.  
The picture quality does not change during playback.  
Even though the speed of the  
Internet connection improves during  
playback, the picture quality of Netflix  
streaming movie does not improve.  
The picture quality differs depending on the speed of Internet connection at  
the time the streaming video is loading.  
The picture quality of streaming  
movie (Netflix) is poor.  
Check the speed of your Internet connection.  
Contact your Internet service provider.  
(You may need to improve the broadband speed.)  
Streaming movie (Netflix) often stops Contact your Internet service provider.  
or starts buffering during playback.  
Cannot use theVUDU service.  
(You may need to improve the broadband speed.)  
Check if the network connection is properly made.  
VUDU is available only in the United States.  
Cannot rent or buy movies /TV  
shows onVUDU.  
You need to activate theVUDU account.  
The picture quality ofVUDU movie Check the speed of your Internet connection.You need speeds of at least 9  
is poor. Mbps to this player for high quality uninterrupted playback.  
VUDU movie often stops or starts Check your Internet speed.The following are the required connection  
buffering during playback.  
speeds for picture quality for uninterrupted streaming.  
SD quality (1 Mbps - 2 Mbps), HD quality (2.25 Mbps - 4.5 Mbps), HDX  
quality (4.5 Mbps - 9Mbps)  
Cannot load a Blu-ray Disc™ (stuck Unplug unit from AC outlet for 20 seconds. Plug unit back in and press the  
in “Loading…” mode) cannot open [OPEN/CLOSE] on the unit to eject the disc.  
the disc tray to eject the disc.  
The software update screen  
appears after turning on the unit.  
Please complete the software update.  
When the software update has failed, the software update screen will keep  
appearing after turning the unit on.  
If the software update continues failing, please try it by using a blank SD  
Memory Card with the update software installed to it’s root directory.  
Buffering and/or network errors occur Please stop Netflix/VUDU and perform the Network ConnectionTest in  
while using Netflix orVUDU service “Settings”. If no problems are found, unstable network speed may be the  
under a wireless network environment. cause. Please contact your Internet service provider.  
D Note  
• Do not attempt to repair the Blu-ray Disc™ Player yourself.This may cause severe injury, irreparable damage to  
your Blu-ray Disc™ Player and void your warranty.  
• Please have available your Blu-ray Disc™ Player model and serial number before contacting us.These numbers  
are available on the cabinet, as well as on the packaging.  
EN-56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15. LANGUAGE CODE LIST  
Language  
A-B  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Code  
Language  
French [FRE]  
Frisian  
Code  
5264  
5271  
5358  
5747  
5051  
5158  
5758  
5360  
5367  
5447  
5569  
5455  
Language  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Code  
5957  
5953  
5965  
5958  
5966  
5955  
5964  
5961  
5960  
6047  
6051  
Language  
Siswat  
Slovak [SLO]  
Slovenian  
Somali  
Spanish [SPA]  
Sundanese  
Swahili  
Swedish [SWE] 6568  
T
Tagalog  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Tsonga  
Turkish [TUR]  
Turkmen  
Twi  
U-Z  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Code  
6565  
6557  
6558  
6561  
5165  
6567  
6569  
4748  
4747  
4752  
6563  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
Galician  
Georgian  
German [GER]  
Greek [GRE]  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Hebrew  
Hindi  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian [NOR] 6061  
O-R  
Occitan  
Oriya  
Oromo (Afan)  
Panjabi  
Pashto;Pushto  
Persian  
Polish [POL]  
Portuguese[POR] 6266  
Quechua 6367  
Rhaeto-Romance 6459  
Romanian [RUM] 6461  
Russian [RUS]  
S
Samoan  
Sangho  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Sesotho  
Setswana  
Shona  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
Basque  
Hungarian [HUN] 5467  
I-K  
Bengali;Bangla  
Bhutani  
Bihari  
Bislama  
Breton  
Bulgarian [BUL] 4853  
Burmese  
Byelorussian  
C-E  
Cambodian  
Catalan  
Chinese [CHI]  
Corsican  
Croatian  
Czech [CZE]  
Danish [DAN]  
Dutch [DUT]  
English [ENG]  
Esperanto  
Estonian  
6149  
6164  
6159  
6247  
6265  
5247  
6258  
Icelandic [ICE]  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
Irish [GLE]  
Italian [ITA]  
Japanese [JPN]  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kinyarwanda  
Kirghiz  
Kirundi  
Korean [KOR]  
Kurdish  
L-N  
Laothian  
Latin  
Latvian;Lettish  
Lingala  
5565  
5560  
5547  
5551  
5557  
5347  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
5971  
4851  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
6467  
6559  
6553  
6547  
5350  
6564  
6554  
6566  
6660  
6560  
6550  
6555  
5861  
5847  
5868  
5860  
5866  
F-H  
Faroese  
Fiji  
5261  
5256  
5255  
Sindhi  
Singhalese  
Finnish [FIN]  
Lithuanian  
D Note  
• If you choose a language that has a 3-letter-language code (written in bracket), the code will be displayed every  
time you change the subtitle language setting on page 33 or audio language setting on page 34. If you choose any  
other languages,---” will be displayed instead.  
EN-57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16. SPECIFICATIONS  
General  
Signal system  
NTSC Color  
Power requirements  
Power consumption  
Dimensions (width x height x depth)  
Weight  
120V AC, 60 Hz  
12 W (standby: 0.5 W)  
14.2 x 2.0 x 8.5 inches (360 x 50 x 214.5 mm)  
3.71 lbs. (1.68 kg)  
Operating temperature  
Operating humidity  
41°F (5°C) to 104°F (40°C)  
Less than 80 % (no condensation)  
Connection Specifics  
SD card slot (slot x 1)  
Audio output (Analog) (RCA jack x 2)  
Video output (RCA jack x 1)  
HDMI output (HDMI jack x 1)  
LAN  
L/R: 2Vrms (output impedance: more than 1kΩ)  
1Vp-p (75Ω)  
Digital video: 480p, 720p, 1080i, 1080p, 1080p24 / Digital audio  
10BASE-T / 100BASE-TX  
Wireless LAN (Internal)  
IEEE 802.11 b/g/n  
D Note  
• The specifications and design of this product are subject to change without notice.  
EN-58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17. NETWORK SERVICE DISCLAIMER  
Content and services made available through this product are transmitted by third parties by means of networks and  
transmission facilities over which Company has no control and third party services may be terminated or interrupted at  
any time, and Company makes no representation or warranty that any content or service will remain available for any  
period of time.Without limiting the generality of this disclaimer, Company expressly disclaims any responsibility for any  
interruption or suspension of any content or service made available through this product. Company is not responsible  
for customer service related to the content and services.Any question or request for service relating to the content or  
services should be made directly to the respective content and service providers.  
THIRD PARTY CONTENT AND SERVICES MADE AVAILABLETHROUGHTHIS PRODUCT ARE PROVIDED  
“AS IS.” COMPANY DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED, FOR ANY PURPOSE  
WHATSOEVER. COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED INCLUDING  
WITHOUT LIMITATION,WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,  
ACCURACY,VALIDITY,TIMELINESS, LEGALITY, SUITABILITY, OR QUALITY OF ANY CONTENT OR SERVICE  
MADE AVAILABLETHROUGHTHIS PRODUCT.  
IN NO EVENT SHALL COMPANY BE LIABLE FOR,ANY DAMAGES,WHETHER ARISING IN CONTRACT  
ORTORT, INCLUDING WITHOUT LIMITATION,ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR  
CONSEQUENTIAL DAMAGES, LOST PROFITS,ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES  
ARISING OUT OF, OR IN CONNECTION WITH,ANY CONTENT (OR ANY INFORMATION CONTAINED  
THEREIN) OR SERVICE PROVIDEDTOTHE USER OR ANYTHIRD PARTY, EVEN IF ADVISED OFTHE POSSIBILITY  
OF SUCH DAMAGES.  
All content and services accessible through this product belong to third parties and are protected by copyright, patent,  
trademark and/or other intellectual property rights. Such content and services are provided solely for the User’s  
personal noncommercial use. User may not use any content or services in a manner that has not been authorized by  
the content owner or service provider.Without limiting the foregoing, unless expressly authorized by the applicable  
content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create  
derivative works, exploit, or distribute in any manner or medium any content or services made available through this  
product.  
EN-59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18. MAINTENANCE  
Servicing  
• Please refer to relevant topics on “TROUBLESHOOTING” on page 53 before returning the product.  
• If this unit becomes inoperative, do not try to correct the problem by yourself.There are no user-serviceable  
parts inside. Eject the disc (if possible), remove the SD Memory Card, place the unit into the standby mode,  
unplug the power plug, and please contact: 1-800-605-8610 or visit : www.magnavox.com/support  
Cleaning the Cabinet  
• Wipe the front panel and other exterior surfaces of the unit with a soft cloth.  
• Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit.  
Such chemicals may discolor the surface or damage the unit.  
Cleaning Discs  
• When a disc becomes dirty, clean it with a cleaning cloth.Wipe the disc from the center to outside. Do not wipe  
in a circular motion.  
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents  
or antistatic spray intended for analog records.  
Cleaning the Disc Lens  
• If this unit still does not perform properly although you refer to the relevant sections and to  
“TROUBLESHOOTING” in this owner’s manual, the laser optical pickup unit may be dirty. Consult your dealer or  
an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.  
Disc Handling  
• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.  
• Always store the disc in its protective case when it is not used.  
• Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played back on this unit.  
Do not attempt to play such discs, as they may damage the unit.  
IR Signal Check  
• If the remote control is not working properly, you can use the unit or a digital camera (including a cellular phone  
with built-in camera) to see if it is sending out an infrared signal. See next.  
Check if IR signal is received by unit  
Turn on the unit to ensure the STANDBY/ON indicator is on. Press any button, except [STANDBY/ON .], on  
the remote pointing it at the center of the unit. If the indicator dims and flickers then the IR remote’s signal is  
being received by the unit. If no dim flickering light, then check IR signal from remote next.  
With a digital camera (including built-in cell phone cameras):  
Point a digital camera towards the remote control. Push any button on the remote control and look  
through the digital camera. If the infrared light appears through the camera, the remote control is  
working.  
EN-60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19. TRADEMARK INFORMATION  
Manufactured under license from Dolby Laboratories.Dolby” and the double-D symbol are  
trademarks of Dolby Laboratories.  
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616;  
6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents  
issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered  
trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes  
software. © DTS, Inc. All Rights Reserved.  
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or  
registered trademarks of HDMI Licensing LLC in the United States and other countries.  
“x.v.Color” and “x.v.Color” logo are trademarks of Sony Corporation.  
Java and all Java based trademarks and logos are trademarks or registered trademarks of  
Oracle and/or its affiliates.  
VUDU™ is a trademark ofVUDU, Inc.  
Netflix and the Netflix logo are trademarks or registered trademarks of Netflix, Inc.  
DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or  
certification marks of the Digital Living Network Alliance.  
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.  
Windows Media and the Windows logo are trademarks or registered trademarks of  
Microsoft Corporation in the United States and/or other countries.  
Kodak and KODAK Picture CD Compatible are trademarks of Kodak used under license.  
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony  
Corporation.  
Continued on next page.  
EN-61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
“Blu-ray Disc™”,Blu-ray™” and “Blu-ray Disc™” logo are trademarks of the Blu-ray Disc  
Association.  
is a trademark of DVD Format/Logo Licensing Corporation.  
“BD-Live™” and “BD-Live™” logo are trademarks of the Blu-ray Disc Association.  
“BONUSVIEW™” and “BONUSVIEW™” logo are trademarks of the Blu-ray Disc  
Association.  
EN-62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To request additional information about Cinavia by mail,  
send a postcard with your mailing address to: Cinavia  
Consumer Information Center, P.O. Box 86851, San  
Diego, CA, 92138, USA.  
This product incorporates proprietary technology under  
license fromVerance Corporation and is protected by  
U.S. Patent 7,369,677 and other U.S. and worldwide  
patents issued and pending as well as copyright  
and trade secret protection for certain aspects of  
such technology. Cinavia is a trademark ofVerance  
Corporation. Copyright 2004-2010Verance Corporation.  
All rights reserved byVerance. Reverse engineering or  
disassembly is prohibited.  
20. GLOSSARY  
AAC  
Advanced Audio Coding (AAC) is a lossy compression  
and encoding scheme for digital audio. Audio files that  
have been encoded with AAC generally achieves better  
sound quality than MP3 at similar bit rates.  
AACS  
Advanced Access Content System (AACS) is the  
content protection scheme used with Blu-ray™ discs.  
Analog Audio  
An electrical signal that directly represents sound.  
Compare this to digital audio which can be an electrical  
signal, but is an indirect representation of sound. Also see  
“Digital Audio”.  
Default Gateway  
IP address of the electronic devices (such as router)  
which provide Internet access.  
Digital Audio  
Aspect Ratio  
An indirect representation of sound by numbers. During  
recording, the sound is measured at discrete intervals (44,100  
times a second for CD audio) by an analog-to-digital converter,  
generating a stream of numbers. On playback, a digital-to-  
analog converter generates an analog signal based on these  
numbers.Also see “Sampling Frequency” and “Analog Audio”.  
The width of aTV screen relative to its height.  
ConventionalTVs are 4:3 (in other words, theTV screen  
is almost square); widescreen models are 16:9 (theTV  
screen is almost twice as wide as its height).  
AVCHD  
AVCHD is a new format for high definition video camcorders  
which can record and play high-resolution HD images.  
DLNA (Digital Living Network Alliance)  
DLNA is a cross-industry organization of consumer  
electronics that formulates DLNA Interoperability Guidelines  
for sharing digital contents within a home network.  
BD-Live™  
BD-Live™ is a BD-video (BD-ROM version 2 Profile  
2.0) which contains new functions (e.g. Internet  
connection), in addition to the BONUSVIEW™ function.  
DNS Server  
A server which translates Internet domain names into IP addresses.  
Blu-ray Disc™  
®
Dolby Digital  
Blu-ray Disc™ is a next generation optical video disc which  
is capable of storing much more data than a conventional  
DVD.The large capacity makes it possible to benefit from  
the features such as high-definition videos, multi-channel  
surround sounds, interactive menus and so on.  
The system to compress digital sound developed by  
Dolby Laboratories. It offers you sound of stereo (2ch)  
or multi-channel audio.  
Dolby Digital Plus  
Dolby Digital Plus is the next generation digital audio  
compression technology developed as an extension to  
Dolby Digital. Blu-ray Disc™ supports 7.1 multi-channel  
surround sound output.  
Chapter  
Just as a book is split up into several chapters, a title  
on a BD-video or DVD-video is usually divided into  
chapters. Also see “Title”.  
Dolby TrueHD  
Cinavia™  
DolbyTrueHD is a lossless coding technology developed  
for next generation optical discs. Blu-ray Disc™ supports  
7.1 multi-channel surround sound output.  
Cinavia Notice  
This product uses Cinavia technology to limit the use of  
unauthorized copies of some commercially-produced  
film and videos and their soundtracks.When a prohibited  
use of an unauthorized copy is detected, a message will  
be displayed and playback or copying will be interrupted.  
More information about Cinavia technology is provided  
at the Cinavia Online Consumer Information Center at  
®
DTS (Digital Theater System)  
DTS® is a multi channel surround sound system.You can enjoy  
movie dynamic and realistic sound like movie theater. DTS  
surround sound technologies were developed by DTS, Inc.  
Continued on next page.  
EN-63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
your unit by looking on the rear panel. Some discs are  
compatible with more than one region (or all regions).  
DTS-HD  
DTS-HD® is a lossless coding technology developed as an  
extension of the original DTS Coherent Acoustics format. Blu-  
ray Disc™ supports 7.1 multi-channel surround sound output.  
Router  
A networking device which distinguishes the IP address  
assigned to each device and routing and forwarding  
information in the computer network.  
HDMI (High-Definition Multimedia Interface)  
A digital interface between audio and video source. It  
can transmit component video, audio, and control signal  
with one cable connection.  
Sampling Frequency  
The rate which sound is measured by a specified interval  
to turn into digital audio data.The numbers of sampling  
in one second defines as sampling frequency.The higher  
the rate, the better the sound quality.  
IP Address  
A set of numbers which are assigned to devices  
participating in a computer network.  
Subnet Mask  
JPEG (Joint Photographic Experts Group)  
JPEG is a method of compressing still picture files.  
You can copy JPEG files on BD-RE/-R, DVD-RW/-R,  
CD-RW/-R, or SD Memory Card from a computer and  
play back the files on this unit.  
A mask which is used to determine what subnet an IP  
address belongs to.  
Switch / Hub  
A device used for connecting multiple device to the network.  
LAN (Local Area Network)  
Title  
A group of computer networks covering a small area  
like a company, school or home.  
A collection of chapters on BD-video or DVD-video.  
Also see “Chapter”.  
Local Storage  
A storage area of sub contents for playing virtual  
packages on BD-video.  
Track  
Audio CD uses tracks to divide up the content of a  
disc.The BD-video or DVD-video equivalent is called a  
chapter. Also see “Chapter”.  
MP3 (MPEG audio layer 3)  
MP3 is a method of compressing files.You can copy MP3  
files on BD-RE/-R, DVD-RW/-R, CD-RW/-R, or SD Memory  
Card from the computer and play back the files on this unit.  
Virtual Package  
The function which copies data to other media (local  
storage) from the Internet and plays secondary video,  
secondary audio and subtitles at the same time.The  
method of the playback varies depending on discs.  
Netflix  
Netflix is online movie rental service, offering online  
streaming to customers in the United States.  
VUDU  
PCM (Pulse Code Modulation)  
VUDU is a leading HD on-demand video service which  
utilizes the Internet connection to deliver the highest  
quality on-demand video and Internet applications.  
The most common system of encoding digital audio,  
found on CD and DAT. Excellent quality, but requires a  
lot of data compared to formats such as Dolby Digital  
and MPEG audio. For compatibility with digital audio  
recorders (CD, MD and DAT) and AV amplifiers with  
digital inputs, this unit can convert Dolby Digital, DTS,  
and MPEG audio to PCM. Also see “Digital Audio”.  
Windows Media™ Audio  
Windows Media™ Audio is the audio compressing  
technology developed by Microsoft.You can copy  
Windows Media™ Audio files on BD-RE/-R, DVD-  
RW/-R, CD-RW/-R, or SD Memory Card from a  
computer and play them back on this unit.  
Proxy Server  
Proxy server is a server which acts as an intermediary between  
a workstation user and the Internet to ensure security.  
x.v.Color  
Region Code  
“x.v.Color” is a promotion name given to the products  
that have the capability to realize a wide color space  
based on the xvYCC specifications and is a trademark of  
Sony Corporation.  
Regions associate discs and players with particular areas  
of the world.This unit will only play back discs that have  
compatible region codes.You can find the region code of  
EN-64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21. ESPAÑOL  
21.1 Mando a Distancia  
10. Botón TOP MENU  
Blu-ray Disc™:  
Púlselo para mostrar el menú superior.  
DVD:  
1
2
13*  
14  
Púlselo para mostrar el menú de títulos.  
11. Botones de Î/ï/Í/Æ  
3
Púlselos para seleccionar elementos o  
configuraciones.  
12. Botón HOME  
4
Púlselo para mostrar el menú de inicio.  
13. Botón ¢ (reverso)  
15  
Durante la reproducción, púlselo para invertir rápido  
la reproducción.  
5
6
16  
17  
14. Botón Æ (reproducir)*  
7*  
8
Púlselo para iniciar o reanudar la reproducción.  
15. Botón H (saltar)  
18  
19  
20  
21  
22  
23  
24  
9
Durante la reproducción, púlselo una vez para  
volver al comienzo del título, capítulo, pista o archivo  
actual.  
10  
Durante la reproducción, pulse dos veces sobre la  
tecla para volver al título, capítulo, pista o archivo  
anterior.  
11  
12  
Durante la reproducción de archivos JPEG, púlselo  
para volver al archivo anterior.  
25  
16. Botón Ê (detener)  
Púlselo para detener la reproducción.  
17. Botones numéricos  
(*) La unidad también se puede encender pulsando  
estos botones.  
Púlselos para seleccionar un capítulo durante la  
reproducción.  
8. Botón STANDBY/ON .  
Púlselos para introducir números en el campo de  
entrada.  
Pulse el botón para encender la unidad, o para  
pasar la unidad al modo de espera. (Para apagar  
completamente la unidad, debe desconectar el cable  
de alimentación de CA.)  
18. Botón MODE  
Durante la reproducción, púlselo para visualizar el  
menú de reproducción.  
9. Botones de RED / GREEN / BLUE /YELLOW  
19. Botón NETFLIX  
Púlselo para activar las teclas de atajo en algunas  
funciones de BD-vídeo.  
Pulse para abrir Netflix.  
Cuando se despliega la lista de archivos, presione  
para cambiar las páginas.  
Continua en la página siguiente.  
ES-65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20. Botón OPEN/CLOSE *  
Púlselo para cerrar o abrir la bandeja para discos.  
21. Botón POP MENU/MENU  
Blu-ray Disc™:  
Púlselo para mostrar el menú emergente.  
DVD:  
Púlselo para mostrar el menú del disco.  
22. Botón OK  
Púlselo para confirmar o seleccionar elementos de menú.  
23. Botón RETURN  
Púlselo para volver a la pantalla de funciones o menú mostrado anteriormente.  
24. Botón (adelantar)  
Durante la reproducción, púlselo para avanzar rápido la reproducción.  
Cuando la reproducción esté en pausa, púlselo para avanzar lentamente la reproducción.  
25. Botón G (saltar)  
Durante la reproducción, púlselo para saltar al siguiente capítulo, pista o archivo.  
Cuando la reproducción esté en modo de pausa, púlselo para avanzar la reproducción imagen a imagen.  
26. Botón Δ (pausar)  
Púlselo para pausar la reproducción.  
27. Botón DISPLAY  
Púlselo para visualizar el menú desplegable en pantalla.  
28. Botón REPEAT  
Presione para seleccionar el modo de repetición.  
29. Botón SUBTITLE  
Púlselo para seleccionar los subtítulos de un disco.  
30. Botón AUDIO  
Púlselo para seleccionar el canal de sonido (como idiomas de sonido) de un disco.  
31. BotónVUDU  
Pulse para abrirVUDU.  
32. Botón CLEAR  
Púlselo para borrar la información una vez que se ha introducido.  
D Nota  
• El indicador STANDBY/ON en el panel frontal se atenúa y parpadea cuando se recibe la señal IR del control  
remoto.  
ES-66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21.2 Encontrar el Canal deVídeo en suTelevisor  
Revise los siguientes pasos después de haber completado todas las conexiones a suTV.  
1. Presione [STANDBY/ON .] (espera/encendido) para Encender la unidad.  
2. Encienda su televisor.  
3. Ubique el botón de entrada/video en el mando a distancia de laTV. El botón puede variar de acuerdo a  
la marca y al modelo de laTV. Una vez localizado el botón presione hasta ver “Espere un...” o el menú de  
Configuración Inicial en la pantalla.  
Please Wait...  
Esta es la visualización correcta de la entrada de la fuente de video.  
• Si laTV está conectada por medio de un cable HDMI, puede tomar algunos minutos para que aparezca la  
imagen de abertura.  
• Cuando pase cierto tiempo sin que haya conectado la unidad aparecerá la sólo pantalla de bienvenida la  
primera vez que conecte la unidad.  
21.3 Instalación Inicial  
Por favor, siga las instrucciones que se exponen a continuación para completar la configuración inicial.  
1. Utilice [Î/ï] mientras se presenta la pantalla de bienvenida para seleccionar “Next” y pulse luego [OK].  
2. Aparece la pantalla de configuración del idioma. Utilice [Î/ï] para seleccionar su idioma y pulse luego [OK].  
Idioma  
Por favor, seleccione su idioma para el menú en  
pantalla.  
English  
Español  
Français  
Atrás  
3. Aparece la pantalla de “Modo de Inicio Rápido”. Utilice [Î/ï] para seleccionar el modo deseado y pulse luego  
[OK].  
4. Aparece la pantalla de “Comprueba automáticamente si hay un software más reciente”. Utilice [Î/ï] para  
seleccionar el modo deseado y pulse luego [OK].  
5. Aparece la pantalla de configuración de la red. Utilice [Î/ï] para seleccionar el modo deseado y pulse luego  
[OK].  
• Si selecciona “Por cable” vea informaciones más detalladas en el punto “Wired” de la página 41.  
• Si selecciona “Inalámbrico” vea informaciones más detalladas en el punto “Wireless” de la página 44.  
ES-67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITEDWARRANTY  
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or  
workmanship as follows:  
DURATION:  
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the  
date of original retail purchase. Certain parts are excluded from this warranty.  
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of  
original retail purchase.  
Note:Any product sold and identified as refurbished or renewed carries a ninety (90) days labor  
and parts limited warranty.  
LIMITS AND EXCLUSIONS:  
THISWARRANTY IS EXTENDED ONLYTOTHE ORIGINAL RETAIL PURCHASER.A PURCHASE RECEIPT  
OR OTHER PROOF OF ORIGINAL RETAIL PURCHASEWILL BE REQUIREDTOGETHERWITHTHE  
PRODUCTTO OBTAIN SERVICE UNDERTHISWARRANTY.  
This warranty shall not be extended to any other person or transferee.  
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing  
or if service was attempted by an unauthorized service center.This limited warranty does not apply to any  
product not purchased and used in the United States.  
This warranty only covers failures due to defects in material or workmanship which occur during normal use. It  
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products  
not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling, misapplication,  
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this  
product, or damage which results from fire, flood, lightning or other acts of God.  
THISWARRANTY DOES NOT COVER PACKING MATERIALS,ANYACCESSORIES (EXCEPT REMOTE  
CONTROL),ANY COSMETIC PARTS, COMPLETEASSEMBLY PARTS, DEMO OR FLOOR MODELS.  
FUNAI CORP.AND ITS REPRESENTATIVES ORAGENTS SHALL IN NO EVENT BE LIABLE FORANY GENERAL,  
INDIRECT OR CONSEQUENTIAL DAMAGESARISING OUT OF OR OCCASIONED BYTHE USE OF OR  
THE INABILITYTO USETHIS PRODUCT.THISWARRANTY IS MADE IN LIEU OFALL OTHERWARRANTIES,  
EXPRESS OR IMPLIED,AND OFALL OTHER LIABILITIES ONTHE PART OF FUNAI,ALL OTHERWARRANTIES  
INCLUDINGTHEWARRANTY OF MERCHANTABILITYAND FITNESS FORA PARTICULAR PURPOSE,ARE  
HEREBY DISCLAIMED BY FUNAIAND ITS REPRESENTATIVES INTHE UNITED STATES.  
ALLWARRANTY INSPECTIONSAND REPAIRS MUST BE PERFORMED BYANAUTHORIZED SERVICE CENTER.  
THISWARRANTY IS ONLYVALIDWHENTHE UNIT IS CARRIED-INTOANAUTHORIZED SERVICE CENTER.  
THE PRODUCT MUST BEACCOMPANIED BYA COPY OFTHE ORIGINAL RETAIL PURCHASE RECEIPT.IF NO  
PROOF OF PURCHASE ISATTACHED,THEWARRANTYWILL NOT BE HONOREDAND REPAIR COSTSWILL  
BE CHARGED.  
IMPORTANT:  
THIS LIMITEDWARRANTY GIVESYOU SPECIFIC LEGAL RIGHTS.YOU MAY HAVE OTHER RIGHTSTHAT  
VARY FROM STATETO STATE. IF,AT ANYTIME DURINGTHEWARRANTY PERIOD,YOU ARE UNABLETO  
OBTAIN SATISFACTIONWITHTHE REPAIR OFTHIS PRODUCT, PLEASE CONTACT FUNAI CORP.  
ATTENTION:  
FUNAI CORP. RESERVESTHE RIGHTTO MODIFY ANY DESIGN OFTHIS PRODUCTWITHOUT PRIOR NOTICE.  
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:  
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original  
packaging or packaging affording an equal degree of protection, to anyAUTHORIZED SERVICE CENTER. FUNAI  
CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval.  
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please  
contact us at:  
FUNAI SERVICE CORPORATION  
Tel: 1-800-605-8610  
2200 Spiegel Drive, Groveport, OH 43125  
★★  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E5U20UD  

Krups Coffeemaker KM4055 User Manual
KWC Outdoor Shower 10061144000 User Manual
Lenoxx Electronics Stereo System CT 995 User Manual
Life Fitness Home Gym 95LEZ 0XXX 01 User Manual
Lightolier Indoor Furnishings VTS2GPK332 User Manual
Magellan GPS Receiver 3030 LM User Manual
Maytag Refrigerator 16008248 User Manual
Melissa Blender 746085 User Manual
Mercedes Benz Automobile 2000 CLK 320 User Manual
Metz Camera Flash 36 AF 3C User Manual