Dual Deck DVD & 4 Head Hi-Fi VCR
Instruction Manual
Model: DVD833-2
Thank you for your purchase of this Magnasonic product. Please read this Instruction
Manual carefully before using this Magnasonic product to ensure proper use. After
reading this manual, please keep it in a safe place and refer to it when necessary.
For additional information on this product or for help with set-up
please call the Customer Help Line at 1-800-287-4871
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OPERATING
INSTRUCTION AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire
hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and
servicing. This unit fully transistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
ADDITIONAL SAFETY INSTRUCTIONS
15. When you use headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume
sound, it may cause tearing damage.
16. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric
shock.
17. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.
18. Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal injury and serious
damage to the apparatus.
19. Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and
apparatus malfunction.
20. Caution - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
Caution: This unit should only be serviced by an authorized and properly trained technician. Opening the cover or other attempts
by the user to service this unit may result in serious injury or death from electrical shock, and may increase the risk of fire.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Precautions
Notes on handling
• When shipping the Player, the original shipping carton and packing materials come in handy. For maximum protection,
repack the unit as it was originally packed at the factory.
• Do not use volatile liquids, such as insect spray, near the player. Do not leave rubber or plastic products in contact with the
Player for a long time. They will leave marks on the finish.
• The top and rear panels of the Player may become warm after a long period of use. This is not a malfunction.
• When the Player is not in use, be sure to remove the disc and turn off the power.
• If you do not use the Player for a long period, the unit may not function properly in the future. Turn on and use the player
occasionally.
Notes on locating
• Place the player on a level surface. Do not use is on a shaky or unstable surface such as a wobbling table or inclined
stand. The loaded disc may come off the proper position and cause damage to the player.
• When you place this player near a TV or radio, the playback picture may become poor and the sound may be distorted. In
this case, place the player away from the TV or radio.
Notes on cleaning
Use a soft, dry cloth for cleaning.
• For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not
use any type of solvent, such as thinner and gasoline, as they may damage the surface of the player.
• If you use a chemical saturated cloth to clean the unit, follow that product's instructions.
To obtain a clear picture
The player is a high tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture
quality becomes poor. To obtain a clear picture, we recommend regular inspection and maintenance (cleaning or parts
replacement) every 1,000 hours of use depending on the operating environment. For details, contact your nearest dealer.
Notes on moisture condensation
Moisture condensation damages the player. Please read the following carefully.
Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on
the outside of the glass. In the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most
crucial internal parts of the player.
Moisture condensation occurs during the following cases.
• When you bring the player directly from a cold place to a warm place.
• When you use the player in a room where you just turned on the heater, or a place where the cold wind from the air
conditioner directly hits the unit.
• In summer, when you use the player in a hot and humid place just after you move the unit from an air-conditioned room.
• When you use the player in a humid place.
Do not use the player when moisture condensation may occur.
If you use the player in such a situation, it may damage discs and internal parts. Remove the disc, connect the power cord
of the player to the wall outlet, turn on the player, and leave it for two or three hours, the player will have warmed up and
evaporated any moisture. Keep the player connected to the wall outlet and moisture condensation will seldom occur.
UNPACKING
First check and identify the contents of your Combo Player package, as listed below:
VCR&DVD Player
1
1
1
2
1
1
1
AUDIO cable(red and white)
Video cable(yellow)
Batteries(AAA)
Remote control
RF(Radio Frenquency)Antenna Cable
User’s manual
If any item should be damaged or missing, please inform your dealer without delay.
Keep the packaging materials, you may need them to transport your player in the future.
WHERE TO PLACE YOUR COMBO PLAYER
A. Place the unit on a firm, flat surface.
B. When you place this combo player near a radio, or VCR, the playback picture may become poor and/or distorted.
In this situation, move the Combo player away from the other units.
C. If placed in a cabinet, please allow at least 2.5 cm (1 inch) of free space all around the player for
proper ventilation.
TO OBTAIN A CLEAR PICTURE
The Combo Player is a precision device. If the optical pick-up lens, disc drive parts and head are dirty or worn
down, picture quality can become poor. We recommend regular inspection and maintenance every 1,000 hours of
use depending on the operating environment....
Note:
The OSD and illustration in this manual may be somewhat different from the actual situation.
Please take the unit as the standard.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Introduction
Your new VCR&DVD PLAYER is designed for you to enjoy all forms of disc media and VHS Tape. Your player will allow you
to enjoy full-length motion pictures with “at-the-movies” picture and cinema quality sound.
Your new player also supports CD, MP3, and WMA.Your player also has several unique features, including AFF (Active Full
Screen Function that allows you to view wide screen movie presentations in full screen mode), S-Video and component video
output (for greater picture clarity), Parental Control (to prevent children from viewing inappropriate content) and JPEG CD
compatibility (so you can view photos on your TV).
Notes on Discs
HOW TO HANDLE, CLEAN, AND STORE DISCS.
HANDLING DISCS
• Do not touch the playback side of the disc.
• Do not attach paper or tape to discs.
NOTE: The manufacturer shall not be responsible for damage that may occur to a disc from being
operated in the player.
CLEANING DISCS
• Fingerprints and dirt on the disc cause picture and sound deterioration. Wipe the disc from
the center outward with a soft cloth. Always keep the disc clean.
• If you cannot wipe off the dirt off, wipe the disc lightly with a slightly moistened soft cloth
and finish with a dry cloth.
• Do not use any type of solvent such as a thinner, benzine, commercially available cleaners
or anti-static spray for vinyl LP’s.
STORING DISCS
PLAYABLE DISCS
• Do not store discs in places subject to direct
sunlight or near heat sources.
This Combo Player can playback the following discs.
• Do not store discs in places subject to moisture
and dust.
• Store discs vertically in a case. Stacking or
placing objects on discs outside of their case may
cause warping.
Maximum
playback time
Approx. 4 hours
(single sided disc)
Disc Mark
Contains
Disc Size
12 cm
Audio
+
Video
DVD
video
disc
Approx. 8 hours
(moving pictures)
(double sided disc)
TYPE OF TV SYSTEM
Approx. 74
minutes
Connect this Combo Player to a TV with the
NTSC system.
12 cm
Audio
CD
Audio
8 cm
(CD single)
Approx. 20
minutes
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Table of Contents
Safety Precautions....................................................1 Locating a Specific Title, Chapter or Track..............16
Important Safety Instructions.....................................2 Using the On-screen Display...................................17
Introduction...............................................................4 Playing Repeatedly..................................................18
Notes On Discs..........................................................4 Playing in Random Order........................................18
Identification of Controls............................................5 Zooming a Picture On DVD....................................18
Remote Control.........................................................6 Selecting The Camera Angle/
Connecting with TV....................................................8 Language/Audio Settings........................................19
Connecting Optional Equipment................................8 Selecting Subtitles ..................................................19
Connecting TV With S-VIDEO /Component Jack,
Playing in a Favorite order.....................................20
AMP With Digital Audio Out Jack...............................9 MP3 Operation........................................................20
Progressive Scan......................................................9 WMA Operation.......................................................21
VCR Playback.........................................................10 Playing Your JPEG Files..........................................22
Recording................................................................10 Memo On Output Sounds........................................22
Search Function......................................................11 Setting the Parental Lock........................................23
VCR Setting.............................................................12 Customizing the Function Settings..........................24
AFF Function...........................................................14 Troubleshooting Guide............................................25
Playing Back a Disc................................................14 Specifications..........................................................26
Identification of Controls
FRONT PANEL
REAR PANEL
1
2
3
4
5
6
7
8
9
10
11 12
17 18
13 14 15 16
1
2
3
4
5
6
7
8
9
10 11
1
2
3
4
5
6
7
8
9
POWER
1
2
3
4
DIGITAL AUDIO-OPTICAL OUTPUT
S-VIDEO OUTPUT
VIDEO INPUT JACK
AUDIO INPUT JACK
RECORD
TV/VCR
CHANNEL UP/DOWN BUTTON
VCR INDICATOR
DIGITAL AUDIO-COAXIAL OUTPUT
COMPONENT/PROGRESSIVE VIDEO
OUTPUT Y Pb Pr
VCR DECK
LED DISPLAY
5
6
7
8
9
ANALOG AUDIO OUTPUT L R
ANALOG AUDIO INPUT L R
ANALOG AUDIO OUTPUT L R
COMPOSITE VIDEO OUTPUT
COMPOSITE VIDEO INPUT
10 EJECT
11 DVD INDICATOR
12 DVD/VCR
13 DISC TRAY
14 STOP
15 FAST REVERSE
16 PLAY/PAUSE
17 FAST FORWARD
18 OPEN/CLOSE
10 RF OUTPUT
11 ANTENNA INPUT
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Remote Control
THE INSTRUCTIONS BELOW DESCRIBE THE
FUNCTIONS ON THE REMOTE CONTROL.
1.
2.
3.
4.
5.
6.
7.
8.
9.
POWER
18. NUMBER BUTTONS
19. OPEN/CLOSE
20. ANGLE
STEP
1
2
19
20
SUBTITLE
SHUFFLE
REPEAT
AUDIO
21
22
3
4
23
5
6
21. I/P (INTERLACE/PROGRESSIVE SCAN)
22. ZOOM
7
8
24
25
9
23. AFF
10
11
26
27
A-B REPEAT
DVD
24. DISPLAY
12
25. REC
VCR
26. TITLE
28
29
13
14
10. SETUP
27. ENTER
30
31
15
16
11. MENU
28. STOP
32
33
34
17
12. DIRECTION BUTTONS
13. PLAY/PAUSE
14. FAST FORWARD
15. FAST REVERSE
16. PROGRAM
17. SEARCH
29. SKIP REVERSE
30. SKIP FORWARD
31. SPEED
18
32. TV/VCR
35
33. COUNTER/CLOCK
34. INPUT SEL.
35. CLEAR/RESET
• POWER button on the remote control is for standby power.
!
• When“
• Child Lock!!!
Press the POWER button of the remote control for about 8 seconds. No buttons of front panel and
remote control can be operated now and Lock indicator “ ” will be displayed on window display. To
” displayed on TV, function is not operational on the disc.
release child lock, press the POWER button of the remote control for about 8 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Continued
Remote Control
PREPARING THE REMOTE CONTROL
To operate the Combo Player, you must first place the batteries in the remote control.
1
2
3
Insert batteries ('2 x AAA size,included).
Open the cover.
Close the cover.
Make sure to match the + and - on the
batteries to the marks inside the battery
compartment.
OPERATING WITH THE REMOTE CONTROL
Operating player with the remote control.
The remote control must point at the remote sensor in order for the
remote to function correctly.
Distance: Maximum of 7 m from the front of the remote sensor.
Angle: Approximately 30º from each direction.
30˚ 30˚
*Do not place the remote control under intense light source such as direct
sunlight.
!
BATTERIES
INCORRECT USE OF BATTERIES MIGHT CAUSE THEM TO LEAK, CORRODE OR EXPLODE.
• Do not place the batteries in the wrong direction.
• It is dangerous to charge, heat, open, or short-circuit the batteries.
• Do not leave dead batteries or mix new with old batteries in the remote control.
• When not using the remote control for a long duration of time, remove the batteries.When operating range becomes reduced,
replace batteries.
• If battery leakage occurs, wipe the battery liquid from the battery compartment, then replace batteries.
REMOTE CONTROL
• The remote control should be aimed directly towards the remote sensor of the Combo Player.
!
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Connecting With TV
• In connecting RF cable to TV, set TV channel to CH3.
How to Connect with RF cable or AV cable
OUT SIDE ANTENNA
OR WALL ANTENNA OUTLET
REAR PANEL OF TV
INPUT
1
INPUT
2
R
AUDIO
L
ANT IN
RF CABLE
AUDIO&VIDEO CABLE
1 Connect antenna cable to the “ANT.IN” jack on rear panel of player.
2 Connect TV to the Combo Player by connecting the “RF OUT” jack with “ANT.IN” jack of the TV with RF cable(included).
3 Connect AV OUT jack on VCR&DVD PLAYER to AV IN jack of the TV with RCA(composite) cables(included).
• Connect with Audio/Video terminal, you can enjoy more clear video and audio.
Connecting With Optional Equipment
How to Connect
REAR PANEL OF CAMCORDER
R
VIDEO
L
AUDIO
OUT
Connect AV OUT jack on camcorder (or playback video) to AV IN jack on rear panel (or front panel) of VCR&DVD PLAYER with
RCA(composite) cables.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Connecting TV With S-VIDEO/Component Jack, AMP With Digital Audio Out jack
How to Connect(DVD only)
DVD&VCR
ANT.IN
DVD
ONLY
DIGITAL
AUDIO
AUDIO
L(MONO)
VIDEO
AUDIO
DIGITAL
AUDIO
R
S-VIDEO
Y
R
RF
OUT
OPTICAL
COAXIAL
C
O
M
P
ONEN
T
/
OUT
PROGR
E
SSIVE
Pr
Pb
L
CONNECTING CABLE
(NOT SUPPLIED)
REAR PANEL OF TV
AMPLIFIER
1 Connect S-VIDEO OUT or COMPONENT OUT to TV.
2 Connect analog AUDIO OUTPUT(L/R) jack to TV.
3 Connect COAXIAL or OPTICAL to AMP of Dolby Digital.
Progressive Scan
WHAT IS PROGRESSIVE SCAN?
With the introduction of Digital/High-Definition TV, televisions can scan viewable information at double the frequency of standard
NTSC televisions. This provides for greater picture clarity and detail. This player provides the delivery of images to these newer
televisions with greater detail and film like quality. Connect the player to your HDTV ready television using the component video
inputs/outputs (component video cables not supplied, available at your local electronics store). Do not substitute RCA cables for
component cables, eventough they look alike, as this might damage the player.
HOW TO SETUP THE VIDEO SCAN MODE?
Connect this Player with Y, Pr and Pb, if your TV has Progressive Scan and Component Video input.
Press I/P button on remote control unit to switch between Interlace & Progressive Scan mode.
It is forbidden by law to copy, broadcast, show, play in public, and rent copyrighted material without permission.
DVD video discs are copy protected, and any recordings made from these discs will be distorted.
Manufactured under license from Dolby Labs.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works.
c
1992-1997 Dolby Laboratories, Inc. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
VCR Playback
1 Press POWER button to power on.
Press VCR button to change into VCR mode.
2 Insert the desired tape.
5 To playback forward fast or to reverse it, press
button, respectively.
• Press EJECT button on the front panel or
remote control to remove the tape.
or
3 If you want to start playback, press
When the playback picture is partially noisy, adjust with
TRACKING +/- button.
button.
button on
4 To stop it, press
button.
• For pause, press
button in playback mode.
Recording
To Record With VCR
1 Press POWER button to power on.
4 Select the desired speed (SP or SLP) with SPEED button.
5 Press REC button.
• Press VCR button to change into VCR mode.
• Power on TV and select Ch3, or select AV input.
2 Insert a tape for recording.
6 press
button to pause recording, press again to resume.
• If the pause status continues for five minutes, the recording
will be cancelled automatically.
• Insert a tape with recording tab.
7 To stop recording, press button.
3 With CH+/- and NUMBER button, select the desired
broadcasting channel or external input unit to record.
To Enjoy DVD during recording
If you want to playback DVD during recording with video, insert
a DVD disc.
• Place the desired DVD disc on DVD tray, press DVD button
to switch into DVD mode and press
watch DVD.
button. Then, you can
To Copy From DVD To Videotape
Press DVD button to convert output into DVD mode.
1 Insert the desired DVD disc.
• you can’t copy a DVD disc with copy protect function.
2 Insert a tape for recording.
3 Press REC button.
4 To stop copy, press VCR button and then press button.
• If not, DVD plays again and video continues to copy.
This product incorporates copyright protection technology that is protected by method claims of certain U.S patents and other
intellectual property rights owned by Macrovision Corporation and other right owners Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
(continued)
Recording
One Touch timer Recording(OTR)
One-Touch Recording(OTR) allows you to record in 30-minute increments up to 4 hours at the touch of a button.
1 Start Recording
Follow the instructions on “Recording”.
2 Activate OTR
While in Record mode, press the REC button again to activate One-Touch Recording(OTR).
3 Add Recording Time
Continue pressing REC to add recording time in 30 minute increments up to 4 hours.
• The VCR&DVD PLAYER stops recording automatically when the time has elapsed.
4 Press button to stop recording mode.
Search Function
Search Counter Zero
• Press VCR button to change into VCR mode.
1 Press the SETUP button on the remote control.
• AS soon as the counter searches 0:00:00 , the tape will play
automatically.
2 Press the
button to select the “Search”, and press ENTER
button.
3 Press ENTER button at “Go To Zero Search” to start.
Search Counter
• Press VCR button to change into VCR mode.
1 Press the SETUP button on the remote control.
press ENTER button when you are finished entering the
correct time.
2 Press the
button.
button to select the “Search”, and press ENTER
• The counter appears on screen and the LED display.
• To make changes to the time you have entered previously,
3 Press the
button to select the “Counter Search”, and
press the
/
buttons to go to the input field (hours, minutes
press ENTER button.
etc.) you want to change and use numerical buttons to update
4 Enter the desired time by pressing the numerical keys and the input fields.
Search Index Forward/backward
• The index signal is recorded on the tape automatically when ENTER button.
the recording is started. You can view a recording at a specific 3 If your search is forward direction, highlight “Index
start point by using this search feature.
• Press VCR button to change into VCR mode.
1 Press the SETUP button on the remote control.
Search(+)” Index searching motion, then press ENTER button.
4 If your search is backward direction, highlight “Index
Search(-)” Index searching motion, then press ENTER button.
2 Press the
button to select the “Search”, and press
Search Index Number
• Use this feature to search for a specific index number.
• Press VCR button to change into VCR mode
1 Press the SETUP button on the remote control.
• If your search is forward direction, press up
select desired Index Number.
• If your search is reverse direction, press down
button to
button to
2 Press the
button.
button to select the “Search”, and press ENTER select desired Index Number.
4 After the correct index number is highlighted on the screen,
3 Press the
button to select the “Index Number Search”, press the ENTER button to move to the specific index number
and press ENTER button.
you have requested.
Download from Www.Somanuals.co1m1. All Manuals Search And Download.
VCR Setting
Clock
• Press VCR button to change into VCR Mode and follow the NUMBER buttons.
procedures below.
For DATE SET, follow the order of Month/Day/ Year ; for TIME
1 Press the SETUP button on the remote control.
2 Press the ENTER button, while highlighting CLOCK SET.
SET, follow the order of Hour/Minute in CLOCK SET screen.
4 Press SETUP button to confirm your selection.
3 Set the current date and time with
button and
5. Press SETUP button again to get out of the menu system.
Programming a Recording
1 In VCR mode press the SETUP button on the remote control. button.
2 Press the
button to select the “Program Set” and press 7 Select End time
ENTER button.
3 Select “Channel”
cable video 1
• Move into "End Time" with button and then, select the
desired number to record with Up/down button or number
button.
video 2
Antenna
8 Select Tape Speed
• If you choose Cable or Antenna as the input signal, press the • Move into "Tape Speed" with
button once to be able to set the channel number using the desired one with up/down button
button and then, select the
numerical buttons.
4 Select “Start Date”
• Recording speed changes in the following order:
SP SLP
• Move into “Start Date “with
button and then, select the
desired number to record with up/down button or number • Press SETUP button to confirm the program. Note that the
button
player offers you the ability to set-up a maximum of 8 programs
in total. Once you have confirmed the program. The screen will
button and then, select the move to the next program entry form as the title at the top of
the screen has changed to show “ PROGRAM 2 “ or higher.
5 Select “REC cycle”.
• Move into “REC Cycle” with
desired one with up/down button
• REC cycle changes in the following order:
One Time weekly weekdays Daily
If you want to exit the programming screen, simply press the
SETUP button.
• Press NEXT and PREV button to scroll through the 8 event-
programming screens.
6 Select Start Time
• Move into “Start Time” with
button and then, select the • Press the POWER button to activate timer recording.
desired number to record with up/down button or number
Channel Set-up
• This function can only be accessed in STOP mode (when or if you are missing a certain channel).
there is no tape playing).
• Press VCR button to change into VCR mode and follow the
procedure below.
Press the ▼ button until “Manual Set” is highlighted. Use the
or numerical buttons to select the channel you want to
add / erase. Now press the ENTER button to toggle between
“Add” and “Erase”. If you select “Add”. the channel will be
/
1 Press the SETUP button on the remote control.
2 Press the
Channel Set”.
button to highlight and select (Enter) the “ memorized. If you select “Erase”, the channel will be removed
from memory. Press the buttons now to select another
/
3 Selecting cable or antenna viewing
• You must set the viewing mode for your VCR, choosing either
CABLE (cable system connection) or ANTENNA(antenna another setting, or press SETUP button to return to previous
channel you want to modify. Once you are done making
channel modifications, either press ▼/ ▲ buttons to move to
connection). To set the viewing mode:
• Press ENTER to toggle between CABLE and ANTENNA.
4. SELECT “Manual Set”
menu.
5 SELECT “Auto Preset”
• Press button in Channel Set to highlight “Auto Preset”
This function allows you to manually add / delete channels • Press ENTER button to detect all the available channels
from the TV’s memory (in case you don’t like a certain channel automatically and memorize them.
On-Screen Menu Language
1 Press the SETUP button on the remote control. The initial press ENTER button
MENU is displayed.
2 Press the button to select the “Language Select” and
3 Select the language among English, Spanish and French.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
VCR Setting
Setting The OSD Display
• This function allows you to view tape information on the TV press ENTER button.
screen when you start or stop tape playback.
• Press VCR button to change into VCR mode
1 Press the SETUP button on the remote control.
3 Press ENTER button until the appropriate system is
selected.(“On” or “Off”)
4 Press SETUP button to quit.
2 Press the
button to highlight and select the “Option”, and
Auto Power Off
• Once a tape has been played until the end, the tape will be button.
rewound completely and the player will go into standby mode.
• Press VCR button to change into VCR mode
1 Press the SETUP button on the remote control.
3 Press the
button to select the “Auto Power Off”.
4 Press ENTER button, until the appropriate system is
selected.(“Yes” or “No”)
2 Press the
button to select the “Option”, and press ENTER 5 Press SETUP button to quit.
RF Out
• This function allows you to change the output channel to
channel 3 or 4.
ENTER button.
3 Press the
button to select the “Output Channel”.
• Press VCR button to change into VCR mode
1 Press the SETUP button on the remote control.
4 Press ENTER button, until the appropriate system is
selected. ( “CH3” or “CH4” )
2 Press the
button to select the “Option”, and press
5 Press SETUP button to quit.
Tape Handling
1 Do not use any tapes with the following characteristics.
Damage of video head or cut/coiling of tape may cause
failure.
3 After use, store tape vertically in a case to prevent loose.
4 Do not store in the following places.
-High temperature and humidity
-Tape with mold
-Subject to mold formation
-Tape stained with juice or attachments
-Tape having lose film inside
-Subject to direct sunlight
-Subject to dirt or dust
-Disassembled tape
-Near strong magnetic materials such as speaker
2 Moisture condensation may occur in tape. Moisture
condensation can cause damage to the tape and the player.
Therefore, if this occurs, wait for the moisture to disappear
before using it in the player.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
AFF Function
WHAT IS AFF?
AFF stands for Active Full-screen Function. It allows you to fill the television screen viewing area when using
a wide screen formatted DVD. Press the AFF button on your remote control,this will eliminate black bars on
the top & bottom of the TV screen when viewing movies with an aspect ratio of 1.85:1 and minimize (but not
eliminate) black bars on movies with a wider aspect ratio (2.35:1).
After AFF
Before AFF
Playing Back a Disc
HOW TO PLAYBACK A DISC.
Basic Playback
How to playback DVD video discs.
• Turn on the TV and select the video input source which is connected to the Combo Player.
1. Press the POWER button on the front panel. Press DVD button of remote control to
change into DVD mode.
2. Press the OPEN/CLOSE button.
!
• A disc may be damaged if not correctly
placed on the guides in the disc tray. This
may also cause the Combo Player to
malfunction.
This will open the disc tray.
3. Place the disc on the disc tray.
Be sure the playback side is faced down.
!
• The menu screen will appear automatically
or you may access the menu screen by
pressing the TITLE button.
4. Press the
After closing the disc tray, playback will start.
button.
!
• Moving the Combo Player during playback may cause damage to the disc as well as the player.
• To open and close the disc tray, you should only use the OPEN/CLOSE button on the remote control or Combo Player.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Continued
Playing Back a Disc
ABOUT DVD, CD
DVD, CD icons will appear depending on the disc being played back.
DVD: DVD video discs
CD: Audio CDs
HOW TO START PLAYBACK FROM THE MENU SCREEN
Title 2
Title 4
Title 1
Title 3
1. Press
or the number buttons to select the title.
2. Press the ENTER button.
The Combo Player will start playback from the title selected.
HOW TO REMOVE THE DISC
Press the OPEN/CLOSE button.
Wait until the disc tray is completely open before removing any
HOW TO PAUSE PLAYBACK (STILL PLAYBACK)
Press the
Press the
playback.
during playback.
button to resume normal
discs.
After removing the discs, press the OPEN/CLOSE button to
close the disc tray.
HOW TO STOP PLAYBACK
Press the STOP button once.
The Combo Player is stopped.
At the completion of each movie a menu screen will appear. Be
aware that the on-screen setup menu may damage your TV by
permanently burning that image onto the screen if it is left on
the screen for to long. To avoid this, press the STOP button at
the completion of each movie. You may also decide to setup the
SCREEN SAVER function.
!
Press the
button to replay.
Press the STOP button twice.
The Combo Player is stopped completely.
ADVANCED PLAYBACK
The Combo Player allows you to playback discs at various speeds.
TV SCREEN
2x
2x
4x
4x
8x
8x
16x
16x
PLAYING AT 2X, 4X, 8X, OR 16X THE NORMAL SPEED
You can play back a disc at 2x, 4x, 8x, or 16x the normal speed.
Press the REW or FF button during playback.
The playback speed becomes 2x the normal speed.
The playback speed changes each time you press the REW or FF button.
REW: Fast reverse
!
• The Combo Player may not playback sound during
scan reverse or forward playback of DVD video
discs. The Combo Player will play sound during fast
forward or fast reverse playback of audio CDs.
• The speeds may vary slightly from disc to disc and
the 2x, 4x, 8x, and 16x speeds are only approximate
speeds.
FF: Fast forward
Press
to resume normal playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Continued
Playing Back a Disc
PLAYING IN SLOW-MOTION
A disc can be played back in slow-motion.
Press the
or
button while playback is paused.
Press
button to resume normal playback.
NOTICE
• During the slow-motion playback, the sound may not be heard.
• Some discs do not utilize this feature.
RESUMING PLAYBACK FROM THE SAME LOCATION
This Combo Player allows you to stop playback and continue playback later from the
same location on the disc.
1. Press the STOP button
This will interrupt the playback and the Combo Player will memorizes the location where you stopped
playback.
2. Press the
button
The Combo Player will resume the playback from the location where you stopped playback.
NOTICE
• The following action will cancel the RESUME function:
- Powering off the Combo Player after you stop playback.
- Ejecting the disc.
• Depending on the disc, you may experience a difference of location where playback resumes.
• Some discs do not utilize this feature.
Locating a Specific Title, Chapter or Track
THE DVD VIDEO DISCS ARE NORMALLY DIVIDED INTO TITLES. THE TITLES ARE SUB-DIVIDED
INTO CHAPTERS. MOREOVER, AUDIO CD AND MP3 CD ARE DIVIDED INTO TRACKS. YOU CAN
CONVENIENTLY LOCATE ANY SPECIFIC TITLE, CHAPTER, OR TRACK WITH THIS COMBO PLAYER.
Chapter 1
Chapter 2
Chapter 1
Chapter 2
Chapter 3
Track 1
Track 2
Track 3
Track 4
Track 5
TITLE 1
TITLE 2
DVD Video Disc
Audio CD
LOCATING A TITLE USING THE TITLE MENU
You can locate a specific title using the title menu function, if a DVD video disc contains a title menu.
1. Press the TITLE button
On the TV screen, the title menu will appear.
NOTICE
2. Press the
button to select the title you want
• You may find that some discs will not
respond to this function.
You can also directly locate a specific title by pressing its assigned number
with the number buttons.
3. Press the ENTER button
This will cause the Combo Player to start playback from chapter 1 of the title
selected.
• If different instructions appear on the
TV screen, follow those instructions. The
instructions above are describing the basic
procedure. Procedures may vary depending
on the contents of the DVD video disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Continued
Locating a Specific Title, Chapter or Track
LOCATING A SPECIFIC CHAPTER OR TRACK
This Combo Player allows you to locate consecutive chapters or tracks.
Press the
or
button repeatedly to display the requested chapter or track.
The Combo Player starts playback from the selected chapter or track.
How to locate preceding chapters or tracks
• When you press the PREV
button, the Combo Player starts playback from the beginning of the preceding chapter or track.
How to locate succeeding chapters or tracks
• When you press the NEXT
button, the Combo Player starts playback from the beginning of the succeeding chapter or track.
On some discs the titles may not display the sub-divided chapters.
LOCATING A TITLE
You also can locate a specific title by directly selecting a title number.
1. Press SEARCH button during playback.
A menu will appear.
2. Press direction buttons and numbers to select the title and chapter you want to proceed to.
3. Move the cursor to select Audio, Subtitle, Angle, TT Time, CH Time, Repeat, Time Disp..
NOTICE
• The displays may vary depending on the discs.
• You may experience a difference in TITLE or MENU display.
Using the On-Screen Display
THE COMBO PLAYER ALLOWS YOU TO VIEW THE OPERATIONAL STATUS AND DISC INFORMATION
ON YOUR TV SCREEN.
CHECKING THE OPERATIONAL STATUS
With this function you can view on your TV the following:
Press DISPLAY during playback
-Current title
-Track number
Current Title
Current Chapter
-Total playing time
Title Elapsed
TT 01/12
CH 006/039
0:02:20
Total Chapter
Total Title
Title Remain
TT 01/12
CH 006/039
0:18:50
0:03:50
TO TURN OFF THE ON-SCREEN
DISPLAY
Press DISPLAY repeatedly until
DISPLAY OFF appears on TV screen.
Chapter Elapsed
TT 01/12
CH 006/039
Chapter Remain
TT 01/12
CH 006/039
0:10:40
Display Off
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Playing Repeatedly
THIS Combo Player ALLOWS YOU TO PLAYBACK A SPECIFIC TITLE, CHAPTER, TRACK, OR
SEGMENT REPEATEDLY. (TITLE REPEAT, CHAPTER/TRACK REPEAT, A-B REPEAT).
HOW TO REPEAT A TITLE, CHAPTER, OR TRACK
1. PLAY the title, chapter, or track you want to repeat.
2. Press the REPEAT button.
The repeat mode changes each time you press the
REPEAT button.
HOW TO REPEAT A SPECIFIC SEGMENT
1. Press the A-B RPT button at the beginning of the
segment in which you want to repeat playback. (point
A)
2. Press the A-B RPT button again at the end of the
segment (point B).
Repeats the same chapter.
Chapter
The Combo Player will automatically return to point A and
start to repeat playback of the selected segment (A-B).
3. Press the A-B RPT button to cancel the A-B
repeat function.
Repeats the same title.
Title
Repeats the disc.
All
No repeats.
The Combo Player will resume to normal playback.
A
DVD video disc
AB
• Depending on the disc, you may experience a difference between point A and the location where playback actually resumes.
• Be aware that some discs will not respond to the A-B repeat function.
Playing in Random Order
THIS COMBO PLAYER ALLOWS YOU TO PLAYBACK TITLES, CHAPTERS WITHIN A TITLE, OR
TRACKS IN RANDOM ORDER. (RANDOM PLAYBACK)
PLAYING TITLES IN RANDOM ORDER
This Combo Player will automatically choose the titles in a DVD video disc and play them back in random order.
1. Press the SHUFFLE button .
The Combo Player will now start random playback.
2. TO RESUME NORMAL PLAYBACK.
Press the SHUFFLE button again during random playback.
• The Combo Player will go to another chapter or track and start playback if you press the SKIP
button during random playback.
Zooming a Picture On DVD
ZOOMING A PICTURE
This Combo Player allows you to zoom into a picture as well as shift the zoom point.
2x
3x
4x
1/3
1/4
1/2
Press ZOOM during playback.
The Combo Player magnifiles in the center of the picture.
Press the ZOOM button repeatedly to change the magnification factor.
If you press during zoom playback, the zoom point shift.
TO RESUME NORMAL PLAYBACK.
Press ZOOM repeatedly during zoom playback until the player resumes normal playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Selecting The Camera Angles/ Language / Audio Settings
THIS COMBO PLAYER ALLOWS YOU TO SELECT FROM SEVERAL DIFFERENT ANGLES AND
LANGUAGES.
ANGLE 1
ANGLE 2
HOW TO CHANGE THE CAMERA ANGLE
Press the ANGLE button while playing back a
scene recorded with multiple angles.
Each time you press the ANGLE button, the
angle will change.
Selecting the camera angle
1/2
2/2
NOTICE
• The angle function will not work on DVD video discs that do not contain recorded multiple angles.
• The angle icon indicator will illuminate while playing back a title that contains at least one scene recorded with multiple angles.
HOW TO SELECT A PLAYBACK AUDIO SETTING
This Combo Player allows you to select a preferred language and sound recording system
from those included on the DVD video disc.
1. Press the AUDIO button during playback.
2. Press the AUDIO button again
to cycle backwards.
Audio
1/3
:
AC3 5.1CH
English
Language
Audio
Audio
Audio
2/3
3/3
1/3
:
AC3 5.1CH
AC3 5.1CH
AC3 5.1CH
French
Spanish
English
Good evening
Bonsoir
Buenas tardes
Total Audio Channels
Current Audio Position
:
:
Selecting a language
NOTICE
• The player returns to the initial default settings, when you turn on the Combo Player or replace a disc.
Selecting Subtitles
THIS COMBO PLAYER ALLOWS YOU TO DISPLAY THE SUBTITLES FROM THOSE INCLUDED ON
THE DISC, ON TO YOUR TV SCREEN.
HOW TO DISPLAY SUBTITLES
You have the option to select a preferred subtitle from those included on the DVD video disc.
To TURN OFF the subtitles.
Press the SUB-T button during
playback.
Press the SUB-T during playback until
Subtitle
01/02 : English
02/02 : French
SUBTITLE OFF appears.
Subtitle
Subtitle Off
Subtitle Off
NOTICE
• With some DVDs, you may not be able to turn off the subtitles and they will appear on screen automatically.
• As you press the SUB-T button, the subtitles may not appear immediately during some scenes.
• If the subtitles continue to show on your TV even after the DVD has been turned off, please refer to the TV’s close caption settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Playing in a Favorite Order
COMBINE YOUR FAVORITE TITLES, CHAPTERS, OR TRACKS AND PLAY THEM BACK IN ANY
ORDER.(PROGRAMMED PLAYBACK)
HOW TO SET TITLES, CHAPTERS, OR TRACKS IN A FAVORITE ORDER
The program playback function will automatically playback titles, chapters or tracks in the order preprogrammed.
3. Highlight START at the bottom of the screen and
press ENTER button to confirm that programmed
playback will commence.
1. Insert a disc, then press the PROGRAM button.
At this time, the menu will appear.
Program: TT(XX) CH(XX)
The Combo Player starts memory playback.
01 TT: CH:
02 TT: CH:
03 TT: CH:
04 TT: CH:
05 TT: CH:
Exit
06 TT:
07 TT:
08 TT:
09 TT:
10 TT:
CH:
CH:
CH:
CH:
CH:
To CHANGE the programmed item:
Press the STOP button, then follow step 1.
NEXT
To CANCEL the programmed item:
Press the STOP button, then press the
button.
2. Using the the numerical buttons to enter numbers and
the buttons to navigate the screen and to
make changes, select the items in the order you want
them programmed in.
• When the Combo Player is turned off, or if the disc is removed,
the program item will be removed.
Program: TT(XX) CH(XX)
• Depending on the disc, the programmed playback may not
function.
• The program function supports to play normal CD’s,it is not
available while playing MP3 CD’s and WMA.
01 TT:05 CH:12
02 TT:02 CH:07
03 TT:04 CH:07
06 TT:
07 TT:
08 TT:
CH:
CH:
CH:
04 TT:
05 TT:
CH:
CH:
Exit
09 TT: CH:
10 TT:
CH:
Start NEXT
To clear the numbers that you have programmed in just now, press CLEAR button.
MP3 Operation
PLAYING AN MP3 FORMAT
1. To play MP3 files, you must use the TV in order to be able to navigate the
MP3 folders (group of MP3 songs) and files (songs) to select which ones you
want to play. Insert an MP3 CD, the Combo Player will initialize the disc when
the tray is closed and the directory (folder) will be shown in an MP3 MENU on
screen.
2. Press
then the
key to select and highlight an MP3 file (song).
Press ENTER to commence playback of a MP3 file (song) you have selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
WMA Operation
PLAYING A WMA FORMAT
1.To play WMA files, you must use the TV in order to be able to navigate the WMA
folders (group of WMA files) and files to select which ones you want to play. Insert
a WMA CD, the Combo Player will initialize the disc when the tray is closed and the
directory (folder) will be shown in a WMA MENU on screen.
2.Then press
then the
key to select and highlight a WMA file (song).
Press ENTER to commence playback of a WMA file you have selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Playing With Your JPEG Files
PLAYING YOUR JPEG FILES
Normal Slide Show Presentation
When a JPEG disc is loaded into the player, a menu will appear on screen. Each picture in the current directory
will be displayed consecutively in a slideshow presentation Use the
buttons to select a folder or image
you want to view and then press ENTER button to confirm your selection. Fifteen slideshow “transition” modes are
provided. Use PROGRAM key to select.
NONE:(by default)
mode 1: WIPE TOP
mode 2: WIPE BOTTOM
mode 3: WIPE LEFT
mode 9: EXTEND FROM CENTER H
mode 10: EXTEND FROM CENTER V
mode 11: COMPRESS TO CENTER H
mode 12: COMPRESS TO CENTER V
mode 13: WINDOW H
mode 4: WIPE RIGHT
mode 5: DIAGONAL WIPE LEFT TOP
mode 6: DIAGONAL WIPE RIGHT TOP
mode 7: DIAGONAL WIPE LEFT BOTTOM
mode 8: DIAGONAL WIPE RIGHT BOTTOM
mode 14: WINDOW V
mode 15: WIPE FROM EDGE TO CENTER
RANDOM
IMAGE ROTATION
There are four modes to rotate a picture: Invert, Mirror, Left, and Right. These operations are allowed only when a
picture is being displayed normally, and will be cancelled automatically when a new picture is displayed. The direction
buttons are used to select the different rotation modes:
Up
Down
-Invert/Normal
-Mirror/Normal
Left
Right
-Turn left
-Turn right
ZOOM
This features allows you to view a picture at 50%-200% in several increments. Press the ZOOM button. An on
screen message (“Zoom 100%”) will verify your selection. Use and keys to control the zoom level. Press the
direction keys ( ) to to move the picture in any direction. Once you ZOOM a picture, the slide show is
stopped. To resume the slide show, simply press the button.
Note: When in the ZOOM mode, the slideshow transition and image transformation features are disabled.
Memo On Output Sounds
DISCS AND OUTPUT SOUNDS
DVD Video Discs
CD
MP3 CD
Sound recording
system
Linear PCM
Dolby Digital
MPEG 2
MP3
PCM44.1kHz
48kHz
96kHz
SPDIF
/PCM
SPDIF
/PCM
ANALOG
ANALOG
ANALOG
SPDIF
/RAW
SPDIF ANALOG SPDIF SPDIF
SPDIF
SPDIF
SPDIF
/RAW
Audio setting on
the setting screen
ANALOG
ANALOG
/RAW
SPDIF
/PCM
/RAW /PCM
/RAW
SPDIF
/PCM
/RAW
SPDIF
/PCM
___
___
___
__
ANALOG
AUDIO OUT jacks
__
___
___
___
o
___
o
o
o
o
o
PCM
(48kHz)
MPEG 2
bitstream
PCM
(48kHz)
PCM
(48kHz)
PCM
(44.1kHz)
PCM
(44.1kHz)
Dolby
Digital
bitstream
___ ___
PCM
(48kHz)
__
DIGITAL
AUDIO OUT jack
__
___
___
__
MPEG 1 AUDIO LAYER 3 DISC (MP3)
MP3 Audio Disc Play Back Capable MP3 audio disc can be played back by operating the unit in the
same way as the audio CD.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Setting the Parental Lock
YOU CAN USE THE PARENTAL LOCK FUNCTION ONLY WITH DVD VIDEO DISCS EQUIPPED WITH
THE PARENTAL LOCK FEATURE.
SETTING THE PARENTAL LOCK
DVD video discs equipped with the parental lock function are rated according to their content. The contents allowed
by a parental lock level and the way a DVD video disc can be controlled may vary from disc to disc. For example, if
the disc allows, you can edit out violent scenes unsuitable for children and replace them with more suitable scenes,
or lock out playback of the disc all together.
1. Press STOP twice during playback.
2. Press SETUP
The SETUP MENU appears on the TV screen.
3. Use the
buttons to highlight the PREFERENCE
TO CHANGE YOUR PASSWORD:
PAGE menu and then press ENTER button to go to this page.
1. Follow steps 1 to 3 in the previous section.
2. Scroll through the menu by pressing the ▲ or ▼
buttons and highlight PASSWORD and press the
ENTER button. Press the ENTER button again to select
CHANGE option.
3. Enter old password.
4. Enter new password.
5. Re-enter to confirm your new password.
6. Press ENTER.
7. Press SETUP.
4. Scroll through the menu by pressing the ▲ or ▼
buttons and highlight PARENTAL. Press the ENTER
button to enter this menu.
5. Highlight the rating level you want to switch to and
press the ENTER button.
6. Now you will need to enter a password to be able to
change the rating level. The factory preset password
is 3308. Enter it using the numerical buttons and press
the ENTER button to confirm the rating level change.
See next section for information on changing the preset
password.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Customizing the Function Settings
THIS COMBO PLAYER ALLOWS YOU TO CUSTOMIZE THE PERFORMANCE TO YOUR PERSONAL
PREFERENCE.
DISPLAYING THE SETUP MENU SCREEN
The SETUP MENU screen asks you to select a setting category from General Setup, Speaker Setup, Dolby
Digital Setup, Video Setup and Preferences. The selected category will provide you the setting details on-screen.
1. Press SETUP.
2. Press
to select category (highlight), then press ENTER.
3. Press SETUP to return to normal playback.
--Video Setup Page--
--Preference Page--
--General Setup Page--
--Speaker Setup Page--
Downmix
--Dolby Digital Setup--
Dual Mono
Dynamic
Sharpness
Brightness
Contrast
Low
00
00
Audio
ENG
Off
TV Display
Angle Mark
OSD Lang
PS
On
ENG
Subtitle
Disc Menu
Parental
Password
Default
ENG
LT/RT
Stereo
SPDIF Output RAW
Stereo
Captions
Screen Saver
Off
On
L-Mono
R-Mono
Mix-Mono
Normal /PS
Normal /LB
Wide
High
Medium
Low
English
FULL
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
3
1
1
/
/
/
4
2
4
English
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
On
Off
OFF
English
French
Spanish
- 2 0
0
0
+ 2 0
+16
English
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
-16
SPDIF Off
SPDIF/RAW
SPDIF/PCM
Off
1 KID SAFE
2 G
3 PG
On
Off
4 PG-13
5 PG R
6 R
7 NC-17
8 ADULT
Off
On
Off
Old Password
New Password
Confirm PWD
OK
Change
Reset
NOTICE
• Preset password is 3308 .
•The SETUP MENU screen disappears if you press the SETUP button while it is displayed.
•Any button can disable Screen Saver except the POWER button. After that,you can press some button to make the relative operation.
• Functions and menu are subject to change without notice.
• You must remove any/all disc from the player in order to access Preference Page.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Check the following guide for a possible correction to a problem before
contacting customer service.
Troubleshooting Guide
SYMPTOMS AND CORRECTION
• Connect the power plug into the wall outlet securely.
• Check if the child lock is released.
No power
• Check if the power plug is connected to an AC outlet.
• Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessay, remove all the obstacles between the
sensor and the remote.
The player does not respond
to the remote control.
D
V
D
• You have to be within 7m of the player.
• Verify the connection from the video output of the player to the TV video input. Then switch TV to
appropriate mode.
• Connect the video cable into the jacks securely. Refer to your television owners manual.
No picture
V
C
R
• Connect the audio cables into the jacks securely.
• Verify the connection from the DVD audio output to the TV or receiver audio input. Then switch to the
appropriate source on the receiver. Refer to your audio amplifier owners manual.
No sound
• Check if the player is in VCR mode or DVD mode.
• Check if the player is in counter status. Press the COUNTER/CLOCK button to switch.
LED no playtime display
Timer recording failure
• make sure the timer recording is set correctly.
• Make sure power is off.
• Make sure the DVD/VCR clock is set correctly.
Cannot go into Record mode. • Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape.
Playback picture is partially
• Adjust tracking control for a better picture by pressing the TRACKING+/- button.
noisy
Cannot view a tape but the
• Head cleaning may be necessary.
audio is OK.
V
C
R
• Select channel 3 or 4 on your TV.
No or poor playback picture
• Fine tune your TV.
TV programs cannot be seen • Check the ANT.IN and RF OUT connections.
normally.
• Press the VCR button on the remote control.
Video or color fades in and
out when making a copy of a • You cannot copy a copyrighted video tape. You are experiencing copy guard protection.
video tape.
Cannot remove the tape
Black & White picture
• Check if the player is in the VCR mode. If not, press the VCR button to switch the mode.
• Damaged S-Video connector (bent pin)
• A small amount of picture distortion may appear because of a poor quality video/sound transfer to disc.
This is especially true of some discs manufactured between 1997-1998.
• Scratched disc
The playback picture has
occasional distortion
Brightness is unstable or
noises are produced on
playback pictures
• Connect the player directly through the TV and not through any other source. What you’re viewing is the
effect of the copy protection circuitry required on all combo players.
D
V
D
• Place the disc with the graphics side up.
• Place the disc on the disc tray correctly inside the guide.
• Make sure the disc is free from scratches & fingerprints.
• Press the SETUP button to turn off the menu screen.
• Cancel the parental lock function or change the parental lock level. (The Pre-set password is 3308.)
• Turn the power off then disconnect the power plug and reinsert it back into the wall. Retry again.
• Use region 1 discs only.
The Combo Player does not
start playback
MP3 won’t read disc or it
skips
• Reburn disc as the software edition used may not be compatible with the player. Check web site for
instruction.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Specifications
Power supply
120V~ 60 Hz
Power consumption
Weight (Approx.)
External dimensions
Signal system
25W
5.7 kg
430 x 91 x 365 mm (W/H/D)
NTSC
Operative temperature
Installlation condition
Received channels
RF Input/output
Video input
+5°C~35°C
Horizontal/Relative humidity under 80%
VHF:2-13 CH /UHF:14-69CH/Cable:1-125
U/V-mixed:75 unbalanced
1.0 V (p-p), 75
unbalanced RCA JACK
Audio input
-8.8 dBm,RCA JACK
3 or 4 CH
RF output
Video output
1.0 V (p-p), 75
RCA JACK
negative sync., Mini DIN 4-pin x 1
(Y) 1.0 V (p-p), 75
(C) 0.286 V (p-p), 75
S video output
(Y)1.0V (p-p), 75
(Pb)0.7V (p-p), 75
(Pr)0.7V (p-p), 75
Component video output
Audio output(DVD analog audio)
Audio output(VCR analog audio)
Playable tape
1.8+0.2V(p-p)(rms),10k , pin jack(L,R)x 1
-5.8+2 dBm,RCA JACK
Very high dense tapes with VHS marks
SP:33.35mm/s, SLP:11.12mm/s
SP:2hrs, SLP:6hrs(use of T-120 tape)
12 hrs AM/PM
Tape speed
Playtime
Clock display
FF/REW time(VCR)
<220seconds (T-120 tape)
Download from Www.Somanuals.com. All Manuals Search And Download.
26
MAGNASONIC HOME ENTERTAINMENT WARRANTY
We appreciate your purchase of a MAGNASONIC Home Entertainment product. We take pride in the
quality of our products and have manufactured your new Home Entertainment unit to exacting quality
standards. We feel confident that in normal use, it will provide you with satisfactory performance.
However, should you experience difficulty, you are protected under the provisions of this warranty.
MAGNASONIC Home Entertainment products are warranted against manufacturing defects in materials
and workmanship in normal use for the following period from the date of purchase by the original
user, and is conditional upon the unit being installed and used as directed in the instruction manual.
PRODUCT
PARTS AND LABOUR
D.V.D. / VCR
Video Head
1 year
6 months
Remote Control 90 days
MAGNASONIC's obligation under this warranty shall be limited to the repair, including all necessary
parts and the cost of the labour connected therewith, or at our option the exchange of any Home
Entertainment product which shows evidence of a manufacturing defect within the warranty period.
Replacement parts, furnished in connection with this warranty shall be warranted for a period equal to
the unexpired portion of the original equipment warranty.
CUSTOMER OBLIGATIONS
This warranty applies to the product from the original date of purchase at retail. Therefore, the owner
must provide a copy of the original, dated bill of sale. No warranty service will be performed without
a bill of sale. Transportation to and from the service depot is the responsibility of the owner.
WARRANTY EXCLUSIONS
This warranty is extended to MAGNASONIC Home Entertainment products purchased and used in
Canada. This warranty shall not apply to appearance or accessory items including but not limited to:
antenna, cabinet, cabinet parts, knobs, batteries, connecting cables, cassette tapes, compact discs.
This warranty shall, in addition, not apply to damages due to handling, transportation, unpacking, set-
up, installation, customer adjustments that are covered in the instruction book, repair or replacement of
parts supplied by other than the MAGNASONIC authorized service depot, any malfunction or failure
caused by or resulting from abnormal environmental conditions, improper unauthorized service,
improper maintenance, modifications or repair by the consumer, abuse, misuse, neglect, accident, fire,
flood, or other Acts of God, and incorrect line voltage.
This Home Entertainment product is only warranted to the original retail purchaser. This warranty
becomes void in the event of commercial or rental use. This warranty becomes void in the event serial
numbers are altered, defaced or removed.
MAGNASONIC reserves the right to make changes in design or to make additions to or improvements
upon this product without incurring any obligation to install the same on products previously manufac-
tured. The foregoing is in lieu of all other warranties expressed or implied and MAGNASONIC neither
assumes nor authorizes any person to assume for it any other obligation or liability in connection with
the sale or service of this product. In no event shall MAGNASONIC or its MAGNASONIC dealers be
liable for special or consequential damage arising from the use of this product, or for any delay in the
performance of this warranty due to cause beyond our control.
The purchaser may have other rights under existing provincial or federal laws, and where any terms of
this warranty are prohibited by such laws, they are deemed null and void, but the remainder of the
warranty shall remain in effect.
HOW TO OBTAIN SERVICE
Should this product require service, you may obtain specific information on how to obtain service by
contacting the MAGNASONIC Dealer from whom this product was purchased,
or by contacting us directly:
SONIGEM SERVICE
300 Alden Road
Markham, Ontario
L3R 4C1
PHONE: (905) 940-5089 FAX: (905) 940-2303
1-800-287-4871
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
|