Compact Mobile DVD Player
Owner's Manual
Model: MV-DVD-PL2
For operational or technical assistance, after reading this manual,
Download from Www.Somanuals.com. All Manuals Search And Download.
Using this Product Safely
Operation
Before installation and use of this DVD
Proper Power Supply
This product is designed to operate with a
player, please read this manual completely. 12 Volt DC, negative ground battery system.
Driving
Protecting the Disc Mechanism
Avoid inserting any foreign objects into the
slot of this player. Failure to observe this
precaution may cause malfunction of this
unit.
Be aware of road and traffic conditions,
keep the volume at a low level.
Car Washing
Do not expose the product to water or
excessive moisture. This could cause elec-
trical shorts, fire or other damage.
Repairs
Contact our customer service representa-
tives. Do not attempt to disassemble or
adjust this product yourself.
Parking
Parking in direct sunlight can produce very
high temperatures inside your vehicle. Give Installation
the car interior a chance to cool down
before starting playback.
The unit should be installed in a horizontal
or vertical position.
DVD Player Features
• This DVD player provides multi-media,
high resolutions images with high-quality
surround-sound effects.
• Supported formats include: DVD, DVD-
R, CD, CD-R/RW, MP3 and JPEG
Picture.
• Multi-Image ratio, which enables the
DVD player to match different TV
screens.
• Multi-Angle. Users can select different
viewing options (if this feature is included
on the disc).
• Multi-Lingual On-Screen Display Menu
• Last Position Playback Memory
• Front Panel Second Source A/V Inputs.
• Anti-Shock Buffer
• Wireless Remote Control with External
IR Eye.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Handling Notes
Disc Formats Supported by this Player:
Label side up
I
D
E
V
(Single-sided disc only)
Do not touch
the underside
of the disc
Discs which cannot be played with this player:
Do not bend
• DVD-ROM
• DVD-R/DVD-RAM
• CDV
Wipe the disc
from center
toward the
• CD-G
outside edge.
Disc Handling
• Dirt, dust, scratches and warping disc will
cause non operation.
• Do not place stickers on disc or scratch disc.
• Do not warp discs.
Preparing New Discs with Rough Spots
A new disc may have rough edges on its inside
and outside edges. If a disc with rough edges is
used, the proper setting will not be performed
and the player will not play the disc. Therefore,
remove the rough edges in advance by using a
ball point pen or pencil as shown. To do this,
press the side of the pen or pencil against the
inside and outside edges of the disc.
• A disc should always be kept in its case
when not in use to prevent damage.
•
Do not place discs in the following places:
1. Direct sunlight.
2. Dirty, dusty and damp areas.
3. Near car heaters.
4. Car seats or dashboard.
Rough spots on
outside edge
Rough spots
on inside edge
Disc Cleaning
Use a dry soft cloth to wipe the surface. If the
disc is quite dirty, use a soft cloth slightly moist
with isopropyl (rubbing) alcohol. Never use sol-
vents such as benzine, thinner or conventional
record cleaners as they may mar the surface of
the disc.
Ball point pen
or pencil
Note: A disc may become somewhat scratched
(although not enough to make it unusable)
depending on handling and conditions in the
usage environment.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Notes:
• With the screws provided, attach the
brackets on both sides of unit as shown
in the illustration below.
• Install the unit as a floor mount or
underdash mount with the screws pro-
vided.
REW
FF
INP
UT
Floor Mount
REW
FF
IN
PU
T
Underdash Mount
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Electric Connection
Connecting to a Monitor
MV-DVD-PL2
External Infrared Sensor
POWER
Orange RCA
Digital Coaxial Audio Out
Black 3.5mm
Remote Infrared Sensor Input
White RCA
Audio Out - Right
Red RCA
Audio Out - Left
Yellow RCA
Video Out
Yellow Wire +12 V Constant
Black Wire Ground
Blue Wire
Remote Turn On +12 V Output (500ma Max)
Red Wire +12 V Accessory
MovieVision Pod
MV780
DIN Connector
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Electric Connection
Connecting to a MovieVision System that uses a Separate Power Module as the Only Source
MV-DVD-PL2
POWER
Orange RCA
MV-2468IRA
Digital Coaxial Audio Out
IR Adapter Cable
(Not Supplied)
Black 3.5mm
Remote Infrared Sensor Input
White RCA
Audio Out - Right
Red RCA
Audio Out - Left
Yellow RCA
Video Out
Blue Wire
Remote Turn On +12 V Output (500ma Max)
Red Wire
Red Wire +12 V Accessory
Yellow Wire +12 V Constant
Black Wire Ground
Blue Wire
Black Wire
Red Wire +12 V Constant
Yellow Wire +12 V Accessory
Black Wire Ground
MovieVision Pod
MV-POD10-2
MV-POD7
DIN Connector
MV-PM710
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Functions
1
2
3
12
11
10
9
8
7
6
5
4
1. POWER
2. DISC SLOT
3. EJECT
4. HEADPHONE CONNECTION
5. REMOTE INFRARED SENSOR
6. PLAY / PAUSE
7. STOP
8. INPUT (SELECT)
9. FF / NEXT CHAPTER
10. REW / PREVIOUS CHAPTER
11. RESET
12. AV IN
Specifications
Power Voltage:
12V DC
15W
MPEG1, MPEG2
Dolby Digital
Video Signal: NTSC or PAL
1.0Vp-p
Power Consumption:
Video Format:
Audio Format:
Signal Output:
Video:
Audio:
Mix Stereo 2.0Vp-p
RCA Output, Coaxial Digital Output
DVD: 20 Hz-20 KHz
1.6 kg (including package)
160 x 44 x 165 (mm)
Output Interface:
Frequency Response:
Weight:
Dimensions:
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
12
13
1
2
POWER MENU/PBC TITLE
1
1
2
6
3
7
4
8
3
4
5
9
14
15
16
10/0
10+
CLEAR
5
6
7
DISPLAY SUBTITLE SLOW PROGRAM
17
18
19
20
AUDIO
ANGLE
SETUP
MUTE
ZOOM
REPEAT
8
9
CH
+
ENTER
CH
21
22
23
24
25
10
11
DVD/TV/GAME
V
O
L
RC-PL4
Preparing/Using the Remote Control
Preparing the Remote Control
Inserting the Batteries:
1. Open the battery compartment cover.
2. Insert the 2 AAA size batteries. Make
sure that the (+) positive and (-) negative
terminals of the batteries are oriented
correctly.
Using the Remote Control
Point the remote control towards the
remote infrared sensor on the front panel
of the DVD Player.
3. Close the battery compartment cover.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Functions
1. MENU/PBC:
2. POWER:
3. NUMBER:
4. SUBTITLE:
5. DISPLAY:
6. AUDIO:
Selects scenes available on the disc.
Turns the unit "On" or "Off".
Numeric buttons used to enter number of desired track.
Changes the subtitle language on multi-subtitle language discs.
Displays statistical disc information during playback.
Changes the language on multi-language discs.
Changes the view angle on multi-angle discs.
Displays the setup menu.
7. ANGLE:
8. SETUP:
9. ENTER/SELECT: Enter confirms the selected item. The four select buttons moves
the curser to select items.
10. DVD/TV/GAME: Displays the auxiliary input.
11. VOLUME:
12. TITLE:
Decreases or increases the volume level.
Displays the title menu that is stored on the disc.
Ejects the disc.
13. EJECT:
14. CLEAR:
Cancels the entered number.
Plays DVD’s slow forward/reverse.
Plays CD tracks in the order programmed.
Mutes the sound.
15. SLOW:
16. PROGRAM:
17. MUTE:
18. REPEAT:
19. ZOOM:
Repeats play of chapters, titles and discs.
Enlarges or reduces size of picture.
Starts/Pauses play.
20. PLAY/PAUSE:
21. STOP:
Stops play.
22. BACKWARD:
23. FORWARD:
24. PREVIOUS:
25. NEXT:
Plays disc fast backwards.
Plays disc fast forward.
Skips to previous track/chapter.
Skips to next track/chapter.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Remote Sensor
Loading a Disc
Depending on the placement of your DVD
player, you can control the DVD functions
either by pointing the remote control
directly at the DVD player or at the external
remote sensor.
1. Turn the car ignition "On" to the acces-
sory position.
2. Press the POWER button.
3. Insert the disc with printed side facing
up into the disc slot.
4. The disc will then load, and disc play-
back will start automatically.
Last Memory
After the engine is turned "Off" or the unit
is powered "Off", the unit will resume play
at the point play was interrupted when the
player is turned back on again.
Ejecting a Disc
Press the EJECT button to eject the disc
from the DVD player (remove the disc or it
will reload automatically). Push EJECT
again to reload the disc.
Fast Forward
While a disc is playing, push the
FORWARD button to play fast forward. With
each press of the button you will scroll
through these five fast forward speeds: 2x,
4x, 8x, 16x and 32x. When maximum speed
is reached, pressing FORWARD again will
return play to normal speed.
Playing a Disc
Press
PLAY/PAUSE to start disc
playback.
Pausing a Disc
Press
PLAY/PAUSE during disc
Fast Backward
playback to stop play temporarily. Press
PLAY/PAUSE again to resume normal
playback speed.
Note: When the DVD player is in slow play,
fast forward or fast reverse mode, push
PLAY/PAUSE button to resume normal
playback speed.
While a disc is playing, push the
BACKWARD button to play fast backward.
With each press of the button you will
scroll through these five fast backward
speeds: 2x, 4x, 8x, 16x and 32x. When
maximum speed is reached, pressing
BACKWARD again will return play to nor-
mal speed.
Volume Control
+
Press the VOL button to increase the vol-
Slow Play
ume level. To decrease the volume level
While the disc is playing, push SLOW to
play disc in slow motion. There are four
slow forward speeds and four slow back-
wards speeds:
-
push the VOL button.
Muting the Sound Level
To lower the sound level while disc play
continues press the MUTE button on the
remote control. Press MUTE again to
resume sound to the previous level.
1/2
1/4
1/8
1/16
1/2
1/4
1/8
1/16
Push SLOW once, and the speed changes
by one increment. Continue pushing SLOW
until disc play returns to normal speed.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Title Selection
Stopping Play
If the DVD has multiple titles recorded
on the disc, a preferred title can be
selected from the title menu to start
playback.
1. Press TITLE during playback. The title
menu is then displayed.
While the disc is playing, push the
button to stop play temporarily. Press
PLAY/PAUSE to resume play at the point
play was interrupted, or press the STOP but-
ton again to completely stop disk playback.
Press PLAY/PAUSE to start playback from the
beginning of disc.
STOP
2. Use the
SELECTION but-
tons to select a preferred title.
3. Confirm selection by the pressing the
ENTER button.
Scene Selection
With the DVD in playback mode, follow these
The disc may also contain submenus.
Use the SELECTION buttons to make a
submenu selection. Then push the
ENTER button to confirm the selection.
steps:
1. Push MENU/PBC. The different scenes
available on the disc will be displayed.
2. Use the
select a desired scene.
SELECTION buttons to
Select Subtitle Language
(Only available on multi-subtitle language
discs). Press SUBTITLE during playback
to display current subtitle language.
Continue pressing SUBTITLE until
desired subtitle language is reached.
3. Push ENTER to confirm the selection.
The disc may also contain submenus. To
make a submenu selection use the SELEC-
TION buttons. Then push the ENTER button
to confirm the selection.
Multi-Audio Language Function
(Only available on multi-audio language
discs). Press AUDIO during playback to
display current audio language. Continue
pressing AUDIO until desired audio lan-
guage is reached.
Skipping Tracks/Chapters
Push the
NEXT button to skip to next
track/chapter on a disc. Push the
VIOUS button to skip to previous track/chap-
ter on a disc.
PRE-
Auxiliary Sources
Selecting a Specific Track
For those discs with direct track numbers,
use the NUMBER buttons to select desired
track:
Push the DVD/TV/GAME button to
switch to an auxiliary source (i.e. VCR,
TV or game console). Push
DVD/TV/GAME again and the unit will
return to the DVD player.
1
1
2
3
4
5
9
6
7
8
10/0
10+
When the track is greater than 9, push the
10+ button, then the relative NUMBER button.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Function
Repeat Play
While a disc is playing, continue pushing
The function only works for discs having
REPEAT to select from three repeat modes. scenes recorded at different angles.
For DVD discs:
Press ANGLE during playback. Each time
the button is pressed, the number of the
angle changes in sequential order.
Push REPEAT to repeat Chapter.
Push REPEAT again to repeat Title.
Push REPEAT again to repeat All.
Push REPEAT once more to Exit.
Program Play
(Only available on certain types of discs)
When disc play is stopped:
For CD discs:
Push REPEAT to repeat Track.
Push REPEAT again to repeat All.
Push REPEAT once more to Exit.
1. Push the PROGRAM button to displayed
the programming screen.
2. Use the NUMBER buttons to enter the
desired chapter or track.
Zoom
Example: To play Track 5, then Track 3,
and finally Track 16. Push 3, 5, 10+ 6 in
that order.
While playing a disc, press the ZOOM but-
ton to increase or decrease the screen
image. There are magnification levels:
three levels of increased magnification X2,
X3, X4 and three levels of decreased mag-
nification 1/2, 1/3, 1/4. Zoom toggles
through each of the six magnification lev-
3. Use the
SELECTION buttons
to select "Start" and then press ENTER
to start Program Play.
els, then returns to normal size on the sev- Note: When the symbol is displayed,
enth press of the button.
this signifies an invalid operation that is
not accepted by the DVD player.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Display Disc Playing Time
Continuously pressing the DISPLAY button This DVD player supports MP3 discs. When
MP3 Operation
during playback will sequentially display:
Title Elapsed, Title Remain, Chapter
Elapsed, Chapter Remain, and Display Off.
Note: The information displayed is subject
to the type of the disc playing.
a MP3 disc is loaded, an image similar to
the one below will be displayed.
PAL/NTSC SETTING
If you find that the picture/audio is distort-
ed, or there is no color (black and white)
check that the correct format (PAL or
NTSC) is selected for the disc playing was
recorded in:
1. There must be no disc in the player.
2. Press the SETUP button and use the
SELECTION buttons to go to the
"Preferences Page".
Use the
SELECTION buttons to move
the cursor through the MP3 directory. Then
3. Use the
to "TV Type" and push
submenu.
4. Select either PAL or NTSC.
5. Press the SETUP button to confirm.
SELECTION buttons to go push ENTER to play desired track. To play
to enter the
another MP3 track, push the STOP button,
then use the SELECTION buttons to select
the track. Then push ENTER to play desired
track.
Note: While a disc is playing, you can push
the
PREVIOUS or NEXT buttons
to select the previous track played or the
next track. Then push ENTER to play that
track.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
Press the SETUP button to display the
System Setup Menu.
Use the
igate through the menu: General Setup
Page, Audio Setup Page, Video Setup
Page, and Password Setup Page. Confirm
your selection by pressing the ENTER but-
ton.
Set Screen Ratio
Press the SETUP button to enter the
SELECTION buttons to nav- General Setup Page. Use the
SELECTION buttons to navigate to "TV DIS-
PLAY". Press the ENTER button to select.
Press the
the right. To change the screen settings,
use the SELECTION buttons to navi-
button to enter submenu on
In the submenus, use the
SELEC-
gate to desired setting. Confirm your selec-
tion by pressing the ENTER button.
Press the SETUP button to exit the system
setup menu.
TION buttons to make your selection.
Confirm your selection by pressing the
ENTER button. To navigate up and down
use the
SELECTION buttons. Confirm
your selection by pressing the ENTER button.
GENERALL SETUP PAGE
4:3 PANSCAN
TV DISPLAY
PS
Press
to escape the submenu and
ANGLE MARK
OSD LANNGUAGE
CAPTIONS
ON
4:3 LETTTERBOX
16:9
ENG
OFF
make another selection, or press the
SETUP button to exit the setup menu.
Below is an example of the General Setup
Page:
SCREEN SSAVER
LAST MEMORY
ON
ON
SET TV DISPLAY MODE
Current Item
General SSetup Pag e
Note: There are three screen ratio avail-
able: (4:3 Panscan, 4:3 Letterbox, 16:9)
They enables user to select a screen ratio
to the match the disc. Below is a chart
showing the various formats.
TV DISPLAY
PS
ANGLEE MARK
OSD LAANGUAGE
CAPTIONS
ON
ENG
OFF
SCREEN SSAVER
LAST MMEMORY
ON
ON
Video of Disc
4:3PS
4:3LB
Normal
16:9
4:3
Go To General Setup Page
Explanation of
the current item.
16:9
16:9
15
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
To activate the Last Memory Function,
Set Last Memory Function
press the SETUP button to access the
General Setup Page. Press the SELEC-
TION button to access the Last Memory
submenu. Press the SELECTION button
to highlight "On". Confirm your selection by
pressing the ENTER button. To exit this
menu, press the SETUP button.
The DVD player can identify the last format
of the disc being used to store the last
frame shown in its memory prior to unit
being powered off. This function memo-
rizes the point at which the disc was
stopped. The disc can be removed from
the unit. Then if the same disc is loaded
again, play will resume from the point at
which it was stopped, providing that no
other disc of the same format was loaded
in the interim.
General Setup aPge
TV DISPLAY
PS
ANGLEE MARK
OSD LAANGUAGE
CAPTIONS
ON
ENG
OFF
The DVD player memorizes the two differ-
ent disc formats (DVD and CD). Each type
of disc can be stopped, removed from the
tray and play can be resumed without
affecting the memory function of the other
two disc formats. If the DVD player is con-
nected to the vehicle's lighter socket, the
last memory function will only operate
when the DVD is powered off by the power
button on the remote control or from the
power button on the unit's front panel.
SCREEN SSAVER
LAST MEEMORY
ON
On
Off
ON
Set LastMemory Function
16
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
Parental Control
Video Quality Settings
Note: To set Parental Control, there must
not be a disc in the player. Press the
SETUP button to enter the General Setup
Page. Navigate to the Preferences Page
Press the SETUP button to enter the
General Setup Page. Navigate to the Video
Setup Page using the
SELECTION
buttons and press the ENTER button to
select Color Setting.
using the
SELECTION buttons and
press the ENTER button.
Press then use the SELECTION buttons
to select between: Sharpness, Brightness,
Contrast, Gamma, Hue, Saturation, and
Luma Delay. Press to select the sub-
menu. Then use the SELECTION buttons to
adjust setting. Press ENTER to confirm set-
ting. Press SETUP to exit the menu.
Use the SELECTION buttons to select
"Parental". A submenu appears requesting
password. Enter the factory default pass-
word (123456) and press ENTER. Select
suitable parental level by using the
SELECTION buttons and confirm by press-
ing the ENTER button. Press SETUP to exit
the menu.
Video Quality Setup
Preference Page
Sharpness
Low
High
Brighttness
Contrast
Gamma
Hue
Saturation
Luma Delay
TV/TYPE
1 KID SAFE
2 G
3 PG
4 PG13
5 PGR
6 R
00
00
None
00
00
1T
Medium
Low
PBC
PARENTAL
DEFAULT
7 NC17
8 ADULT
Sharpness
Set Parental Control
Password
OK
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Only qualified service personnel should
No Sound:
remove the cover or service this player.
Otherwise the warranty will become
invalid.
• Check audio connections.
• If using a Hi-Fi amplifier, try another
sound source.
If it appears that your DVD unit is faulty,
first consult the list below.
Disc Does Not Play:
• Ensure the disc label is facing upwards.
• Clean the disc.
No Power:
• Check to see if the disc is defective by
trying another disc.
• Check to see if the player is set to "On".
• Check the power plug of the main unit
is properly connected.
• Check that power outlet is properly
working.
No Return to Start-Up Screen when Disc
is Removed:
• Press POWER to turn "Off" the unit,
then press it again to turn "On" the unit.
• Press RESET button "On" the front panel
of the DVD player.
No Picture:
• Check to see the monitor or TV is
switched to "On".
• Select the correct AV input on the moni- The Player Does Not Respond to the
tor or TV.
• Check the video connection.
Remote Control:
• Aim the remote control directly at the
sensor on the front of the player.
• Avoid all obstacles which may interfere
with the signal path.
• Inspect or replace the remote control
batteries.
Distorted Picture:
• Check the disc for fingerprints and
clean with soft, dry, cloth, wiping from
center to edge.
• A small amount of picture distortion
may appear. This may not be a malfunc- No Audio at Digital Output:
tion.
• Check the digital connections.
• Check the Digital Audio menu to make
sure that the digital output is correctly set.
• Check if the audio format of the select-
ed audio language matches your receiv-
er’s capabilities.
Completely Distorted Picture:
• The disc format is not according to the
TV used (PAL/NTSC).
No Color in Picture, Distorted or B/W
Picture or Distorted Sound from Hi-Fi
Amplifier:
• The disc format is not according to the
TV used (PAL/NTSC).
Buttons Do Not Work:
• Press POWER to turn "Off" the unit,
then press it again to turn "On" the unit.
• Press RESET button on the front of the
DVD unit.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacement Parts Order Form
Send Orders To: Magnadyne Corporation
We Accept Checks, Money Orders, Visa and Master Card
ATTN: Consumer Parts Sales
Make Checks Payable to: Magnadyne Corporation
P.O. Box 5365
Carson, CA 90749-5365
SHIP TO: (No P.O. Boxes)
LAST NAME
FIRST NAME
INITIAL
STREET ADDRESS (IF PAYING WITH A CREDIT CARD, YOUR BILLING ADDRESS IS REQUIRED)
CITY
STATE
ZIP CODE
DAYTIME PHONE NUMBER
CREDIT CARD INFORMATION:
CARD TYPE:
VISA
MASTER CARD
CARD NUMBER
EXP. MONTH
YEAR
NAME - EXACTLY AS IT APPEARS ON YOUR CREDIT CARD
Part #
Description
Qty.
Price Each
$39.95
TOTAL
Remote Control
RC-PL4
Shipping and Handling
Subtotal = ________ . ______
Subtotal + Tax
Up to $20.00
20.01 to 30.00
30.01 to 45.00
45.01 to 70.00
Over 70.01
Add
$5.00
5.95
6.50
6.95
7.95
California Residents Add Sales Tax = ________ . ______
Shipping and Handling (See Chart) = ________ . ______
TOTAL = ________ . ______
No C.O.D.’s
On regular orders please allow 4-5 weeks for delivery. Please give a shipping address where this order
may be delivered between the hours of 9 a.m. and 5 p.m. weekdays. If UPS is unable to deliver, your order will be
returned and additional shipping charges will be required.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
MovieVision Replacement Parts
POWER MENU/PBC TITLE
DESCRIPTION
MODEL #
PRICE
11
5
9
2
6
3
7
4
8
10/0 10+
CLEAR
DISPLAY SUBTITLE SLOW PROGRAM
ANGLE
SETUP
AUDIO
CH+
MUTE REPEAT
DVD Remote Control
RC-PL4
$39.95 Each
ZOOM
ENTER
CH
DVD/TV/GAME
V
O
L
RC-PL4
Warranty
ONE (1) YEAR LIMITED WARRANTY
Magnadyne Corporation or its authorized agents will within 1 year from the date of sale to you, repair,
replace or refund the retail sales price of said product or any part thereof, at the option of the
Magnadyne Corporation or its authorized agents, if said product or part is found defective in
materials or workmanship, when properly connected and operating on the correct power
requirements designated for the specific product. This warranty and Magnadyne Corporation or its
authorized agents obligations hereunder do not apply where the product was; damaged while in the
possession of the consumer, subjected to unreasonable or unintended use, not reasonably
maintained, utilized in commercial or industrial operations, or serviced by anyone other than
Magnadyne Corporation or its authorized agents, or where the warning seal on the product is bro-
ken or the power and/or plugs are detached from the unit. Magnadyne Corporation or any of its
authorized agents will not assume any labor costs for the removal and re-installation of any product
found to be defective, or the cost of transportation to Magnadyne Corporation or its authorized
agents. Such cost are the sole responsibility of the purchaser.
This warranty does not cover the cabinet appearance items or accessories used in connection with
this product, or any damage to recording or recording tape, or any damage to the products resulting
from improper installation, alteration, accident, misuse, abuse or acts of nature.
MAGNADYNE CORPORATION OR ITS AUTHORIZED AGENTS SHALL NOT BE LIABLE TO ANYONE
FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OR CLAIMS EXCEPT THOSE ACCORDED BY
LAW. NO EXPRESSED WARRANTY OR IMPLIED WARRANTY IS GIVEN EXCEPT THOSE SET FORTH
HEREIN. NO IMPLIED WARRANTY SHALL EXTEND BEYOND 1 YEAR FROM THE DATE OF SALE.
This warranty extends only to the original purchaser of the product and is not transferable.
Some states do not allow limitations on how long an implied warranty lasts, and some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above limitations or
exclusion may not apply to you. This warranty gives you specific legal rights, and you may have other
rights that vary from state to state.
Defective merchandise should be returned to the original point of purchase or secondly, to
Magnadyne Corporation, 1111 W. Victoria Street, Compton CA 90220. Return Authorization must be
obtained before sending, or merchandise may be refused.
© Copyright 2006 Magnadyne Corporation
MV-DVD-PL2-UM Rev. A 2-10-06
Download from Www.Somanuals.com. All Manuals Search And Download.
|