Specifications
ART500
System:
Transducers:
Passive Speaker System
Freq. Range (–10 dB):
50Hz-20kHz
Low Frequency:
Quick-Start Guide
15" (380 mm) diameter woofer
The ART500 is a full-range two-way
professional passive speaker system that
combines high power, wide bandwidth, and
the reduced weight of a special hybrid
construction for fixed-installation systems. The
15" low-frequency transducer, in combination
with a 2" titanium compression driver coupled
to an integral 80º x 60º constant directivity
polynomial horn, form an extremely powerful
package for any small to medium-sized sound
reinforcement application.
It features dual Neutrik Speakon® input
and output connectors for cascading multiple
speakers. The passive crossover is designed
to reduce heat dissipation and optimize the
power response of the loudspeaker.
Freq. Response ( 3 dB):
70Hz-17kHz
High Frequency:
2" (51 mm) compression driver,
horn loaded
Horz. Coverage Angle (–6 dB):
80° nominal
Physical:
Vert. Coverage Angle (–6 dB):
60° nominal
Enclosure:
Asymmetrical trapezoidal,
reinforced polypropylene
Directivity Factor Q (DI):
10.7 (10.3), averaged 1kHz-10kHz
Mounting:
System Sensitivity:
Lockable 1-3/8" (35mm) stand
mount
100 dB, 1W@1m
Rated Maximum SPL:
Rigging Inserts:
6 points, accepts M10 threaded
133 dB @ 1 m (3.3ft) peak
HF Protection:
The enclosure is constructed of high-
hardware
Over-voltage dampening
strength polypropylene and multilayer wood,
with M10 threaded inserts on all four sides for
rigging, and an integral locking 1-3/8" socket
in the bottom for mounting on a standard
speaker stand.
Input/Output Connectors:
2 Neutrik Speakon
System Input Power Rating:
500W RMS
Dimensions HxWxD:
29.1" x 17.9" x 14.8"
2000W Peak
Recommended Amplifier Power:
700W RMS
(740 mm x 454 mm x 375 mm)
Net Weight:
System Nominal Impedance:
8 ohms
72.7 lb (33.0 kg)
Safety First!
Before connecting and using the
equipment, please read this Quick-Start Guide
carefully and keep it for future reference.
Crossover Frequency and Slope:
1.8kHz; 24 dB/octave
HF Protection:
Dynamic
WARNING! This equipment has been
designed to be installed by qualified
professionals only! There are many factors to
be considered when installing professional
sound reinforcement systems, including
mechanical and electrical considerations, as
well as acoustic coverage and performance.
Mackie Industrial strongly recommends that
this equipment be installed only by a
professional sound installer or contractor.
16220 Wood-Red Road NE Woodinville, WA 98072
TEL +888.337.7404, FAX +425.487.4337
Part No. 910-171-20 Rev. A 2/00
© 2000 Mackie Industrial. All Rights Reserved. Printed in the USA.
Download from Www.Somanuals.com. All Manuals Search And Download.
|