Series FR587W Deluxe Clinical Care Recliner,
Extra Wide
Series FR587WH Deluxe Clinical Care Recliner,
Extra Wide, with Heat and Massage
Assembly and Operating Instructions
IMPORTANT: READ THIS MANUAL BEFORE OPERATING YOUR LUMEX
FR587W / FR587WH DELUXE EXTRA-WIDE CLINICAL CARE RECLINER.
SAVE THIS MANUAL FOR FUTURE USE.
THE MOST CURRENT VERSION OF THIS MANUAL CAN BE FOUND ONLINE
FR587W-INS-LAB-RevC13
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
This manual contains assembly, operation, and maintenance instructions for the Lumex
Clinical Care Recliners Series FR587W and FR587WH. Read the entire manual carefully
before using your recliner, and refer to it during use if you have questions. If you have
further questions, please call Graham-Field / Lumex Technical Support at 770-447-1609.
INTENDED USE
Lumex Clinical Care Recliners are intended to make the care, treatment and recovery of
patients easier and more comfortable. Lumex Clinical Care Recliners are used in a wide
range of healthcare applications including Dialysis, Oncology, Drug Delivery, Same Day
Surgery and Post-Operative Recovery. Lumex Clinical Care Recliners are ideal for use in
hospitals, clinics and rehabilitation centers.
Lumex Series FR587W and FR587WH supports patient weights up to 450 lb (204 kg) when
evenly distributed.
IMPORTANT SAFETY PRECAUTIONS—PLEASE READ BEFORE USE
The safety statements presented in this chapter refer to the basic safety information that
the FR587W / FR587WH user must pay attention to and abide by. There are additional
safety statements in other chapters or sections, which may be the same as or similar to the
following, or specific to the operations. Please note the following special statements, used
throughout this manual, and their significance:
. WARNING:.Indicates.a.potential.hazard.situation.or.unsafe.practice.that,.if.not.
avoided,.could.result.in.death.or.serious.personal.injury.
. CAUTION:.Indicates.a.potential.hazard.or.unsafe.practice.that,.if.not.avoided,.could.
result.in.minor.or.moderate.personal.injury.
s. NOTICE:.Indicates.a.potential.hazard.or.unsafe.practice.that,.if.not.avoided,.could.
result.in.product.or.property.damage.
Info: Provides application recommendations or other useful information to
ensure that you get the most from your product.
WARNINGS
. WARNING:.Read.this.entire.manual.before.assembly.or.operation.
. WARNING:.Periodically.inspect.all.parts.and.replace.as.needed.
. WARNING:.Do.not.use.near.an.open.flame,.as.the.chair.could.be.a.combustion.
source,.resulting.in.fire,.property.damage,.and.severe.physical.injury.
. WARNING:.Service.and.repair.of.the.Lumex.FR587W./.FR587WH.Deluxe.Extra.Wide.
Clinical.Care.Recliner.must.be.performed.by.a.Graham-Field.authorized.distributor..
GF.Health.Products,.Inc..is.not.responsible.for.any.consequence.resulting.from.any.
unauthorized.service.or.repair.
. WARNING:.The.electronics.and./.or.actuator.contain.no.serviceable.components..
If.service.is.required,.the.unit.must.be.returned.to.the.factory.for.repair..DO.NOT.
attempt.to.open.the.electronics.or.actuator.or.obtain.local.service;.this.will.void.
the.warranty.and.may.result.in.damage.to.the.unit..Consult.your.Graham-Field.
authorized.distributor.for.further.information.
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
3
Download from Www.Somanuals.com. All Manuals Search And Download.
. WARNING:.This.product.has.a.maximum.weight.capacity.of.450.lb.(204.kg),.EVENLY.
DISTRIBUTED.
. WARNING:.Casters.must.be.locked.at.all.times,.except.during.transport.
. WARNING:.Unauthorized.modification.of.your.recliner.or.the.use.of.non-Lumex.
replacement.parts.may.change.the.structure.of.the.recliner.and.could.create.a.
hazardous.condition,.which.may.result.in.serious.injury.and.will.void.the.warranty.
. WARNING:.Notice.for.California.Customers-.California.Proposition.65.WARNING:
This.product.contains.a.chemical.known.to.the.State.of.California.to.cause.cancer.
and.reproductive.or.developmental.harm.
. WARNING:.GF.Health.Products,.Inc..specifically.disclaims.responsibility.for.any.
bodily.injury.or.property.damage.which.may.occur.during.any.use.which.does.not.
comply.with.federal,.state.or.local.laws.or.ordinances.
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
UNPACKING
1. Check for obvious damage to the carton or its contents. If damage is evident, please
notify the carrier and your Graham-Field authorized distributor.
2. Remove all packaging materials from recliner base.
PRODUCT DESCRIPTION
upholstered back
upholstered seat
upholstered armrest
padded
push handle
gas spring
actuating lever
upholstered
legrest / skirt
upholstered
footrest
fold down side table
frame
total locking caster
(total of 3 on recliner; black locking tab)
rear directional (swivel) locking caster
(right rear leg only; green locking tab)
removable side panel
Clinical Care Recliner Series FR587W
Upholstered Back Assembly
3
/
8” diameter
large cotter pin
1. After removing all components from the
carton, engage all four locks on the casters
before beginning assembly.
clevis pin
2. See the location of three clevis pins, two ring
cotter pins and two large cotter pins at right.
5
Info: The center clevis pins are /16" in
back brace with
U-brackets
5/16” diameter
clevis pin
3
diameter. The outside clevis pins are /8
"
in diameter.
Back Assembly
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Remove cardboard shipping retainers and
tape from around gas spring cylinders.
Rotate the hinge section on the gas spring
so that it is perpendicular to the upholstered
back, as shown at right.
gas spring hinge
Rotate HInge
panel tabs
side panel
4. Remove side panels from frame:
Depress the two push buttons
located on the lower sides of frame.
Pull side panel gently away and
down from frame. There are tabs
on the frame underneath the
armrest that hold the side panel
in place.
push button
Remove Side Panel
5. Lift the upholstered back from the
sides and place it horizontally with
the upright back tubes resting on
the recliner frame.
clevis pin
cotter pin
Clevis Pin and Cotter Pin
6. Align the holes on the
upright back tubes of the
upholstered back with the
holes on the seat frame.
3
Place the /8" diameter
clevis pins through the
mounting holes in the frame
and back as shown at right.
Align Holes
Place Clevis Pins
7. Secure the two clevis pins
by placing a large cotter
pin through the hole in the
clevis pin (one for each
side) as shown at right.
Place Cotter Pin
Cotter Pin
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
6
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Raise the upholstered back to vertical position.
Tuck the plastic skirt at rear of upholstered
back behind seat frame crossbrace. Align the
hinges at the bottom of the gas springs with
the holes in the U-brackets on the seat frame
crossbrace. While holding the back in position
with one hand, secure both gas spring hinges
5
to the U-brackets by placing two /16"diameter
clevis pins through the U-brackets and hinges
with the other hand.
Place Clevis Pins
9. Secure the clevis pins by placing the ring cotter
pins through the hole in the clevis pins as
shown at right.
Place Cotter Pins
10. Replace side panels:
panel tabs
Insert side panel into recliner
frame by locating the tabs
side panel
underneath the armrest.
Make sure side panel is
properly aligned and that the
top edge is behind the locking
tabs. Press side panel into
frame sides. Make sure that
both push buttons are
protruding into side panel to
ensure side panel is locked in
place.
push button
Replace Side Panel
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
. WARNING:.Disconnection.of.the.device:.In.case.of.emergency,.always.disconnect.
the.device.by.removing.the.power.cord.plug.from.the.power.outlet.
TENTE® CASTERS
. WARNING:.Casters.must.be.locked.at.all.times,.except.during.transport.
black actuator tab
green actuator tab
All Lumex Clinical Care Recliners now feature
the latest design, all-plastic casters from TENTE.
Specifically designed for use in healthcare
environments, the new casters are easier to clean,
easier to move, and tolerate a wide array of cleaners
and chemicals. Each caster is made from high-
grade synthetic materials and features a double-
ballbearing swivel head. The wheel center is made
of polypropylene and the tire tread of TENTEprene
(thermoplastic rubber). The gray non-marking tires
feature precision ball bearings.
total
locking caster
directional (swivel)
locking caster
(right rear caster)
Locking casters: Each Lumex Clinical Care Recliner
features three total locking casters, identified by
black actuator tabs, that lock both the wheel and the swivel. To activate the total lock,
simply press down on the BLACK actuator tab until it locks. To release the total lock, press
on the raised portion of the actuator tab until the lever is back in the normal operating
position.
Directional (swivel) caster: The fourth caster, located on the right rear position of the
recliner, is a directional (swivel) locking caster only. Identified by a green actuator tab, the
directional lock caster will lock in one of two 180-degree positions relative to the frame
(forward and backward) and allows the recliner to track straight when pushed. To activate
the directional lock, simply press down on the GREEN actuator tab until it locks — you may
need to move the recliner slightly until the caster locks in a straight line with the recliner
frame. To release the directional lock, press on the raised portion of the actuator tab until
the lever is back in the normal operating position.
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
8
Download from Www.Somanuals.com. All Manuals Search And Download.
side table
(disengaged position)
SIDE TABLE OPERATION
armrest
To raise table: Raise the side
table all the way up and slide
in toward the armrest until
tabs engage slots in mount
bracket. Press down lightly on
table to ensure locking tabs
are engaged.
3/8" clevis pin
attachment
side table
(engaged position)
side table
mount bracket
tabs engage into
slots on side table
mount bracket
To lower table: Lift the side
table up slightly until tabs
disengage slots and pull table
away from armrest. Lower side
table to self-storing position.
side table
(stored position)
Side Table
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SIDE PANEL OPERATION
For easy cleaning and access to the side and underside of the recliner, Lumex Clinical Care
Recliners feature easy-to-remove side panels.
To remove side panel:
Depress the two push buttons
panel tabs
located on the lower sides of
side panel
frame. Pull side panel gently away
and down from frame. There are
tabs on the frame underneath the
armrest that hold the side panel
in place.
To install side panel:
Insert side panel into recliner
frame by locating the tabs
push button
underneath the armrest. Make
sure side panel is properly
Removable Side Panel
aligned and that the top edge is
behind the locking tabs. Press
side panel into frame sides. Make
sure that both push buttons are
protruding into side panel to
ensure side panel is locked into
place.
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
10
Download from Www.Somanuals.com. All Manuals Search And Download.
RECLINER OPERATION
The Lumex Series FR587W and FR587WH Recliners feature three positions for patient
comfort. The fourth position is a Trendelenburg (or Shock Position) that must be activated
by a caregiver. The Trendelenburg Position CANNOT be activated by a patient while in the
recliner. In addition, the Series FR587W features a back that can be repositioned via the
adjustment lever located on the push handle on the back of the recliner.
First Position (Upright Position)
The first position is the Upright Position. This position
is ideal for patient transport and can be used to initiate
patient treatment / therapy.
Second Position (First Recline Position)
The second position is the First Recline Position and is
also known as the “TV” position. This position is ideal for
patient treatment, rest and reading.
Upright Position
To Achieve Second Position / First Recline Position:
• Reclining by patient: Place hands on armrests and push
body against recliner back to recline yourself to desired
position. To bring yourself up, place hands on armrests
and pull yourself up while leaning your body forward,
away from the recliner back, while at the same time
pushing down evenly on the footrest with your legs.
First Recline Position
(TV Position)
• Reclining by attendant: Standing on either side of the
recliner, grasp the armrest with one hand and the push
handle with the other hand. Push back on push handle
to recline. To return, grasp push handle and pull forward
to raise the recliner’s back.
s. NOTICE:.DO.NOT.use.the.footrest.by.itself.to.
return.the.recliner.to.an.upright.position.from.any.
recline.position..Doing.so.may.damage.the.recliner.
Second Recline Position
(Full Recline Position)
mechanism..Please.follow.the.instructions.above.to.
operate.the.recliner.
Third Position (Second Recline Position)
The third position is the Second Recline Position and is also known as the “Full Recline”
position. This position is ideal for patient treatment, rest and reading.
To Achieve Third Position / Second Recline Position:
• By the patient: From the First Recline Position, continue to push against the back by
placing your hands on armrests and continue to recline yourself to the Second Recline
Position. To bring yourself up, place hands on armrest and pull yourself up while leaning
your body forward away from the recliner back while at the same time pushing down
evenly on the footrest with your legs.
• Reclining by attendant: Standing on either side of the recliner, grasp the armrest with
one hand and push handle with the other hand. Push back on push handle to recline. To
return, grasp push handle and pull forward to raise the recliner back.
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Info: Due to the 450 pound weight capacity (when evenly distributed) the FR587W
Recliner has two gas pistons to assist in the recline and return of the back. One
piston assists during the rearward movement of the back, the other piston assists
during the return of the back to an upright position. For this reason, in order for
the gas piston to operate properly, a person of at least 150 lb (68 kg) should be
sitting in the recliner.
Back Angle Adjustment
For added comfort, the back angle of the
Series FR577RG and FR577RGH can be adjusted
independently of the seat position. From any of
the previous positions, actuate the lever located
on the rear push handle and position the back
to desired angle. To return back to standard
position, actuate the lever and move back to
desired position.
Lever
Trendelenburg Position (Also Known as
Shock Position)
Info: This position can only be achieved by a caregiver.
Standing at the back of the recliner, grasp the
push handle with one hand while actuating the
Lever located on the rear push handle with
other. Slowly guide the back down fully until it
stops and release the lever. If the articulating
headrest is in the forward position, push back
Trendelenburg Position
so that it is even with the back of the recliner.
Trendelenburg Position can be obtained from
(Shock Position)
any position.
To bring recliner out of Trendelenburg, stand
at the back of the recliner and actuate the lever
shown in upper right picture. Slowly guide the
back upright and release the lever. The recliner
can then be placed in the desired position.
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
12
Download from Www.Somanuals.com. All Manuals Search And Download.
GAS SPRING TROUBLESHOOTING GUIDE
Info: gas springs have been pre-adjusted at factory
The gas spring on your recliner provides counterbalancing forces, and is self-locking for
infinite, precise positioning. Unlocking the gas spring is controlled by actuating the lever
located on the padded push handle on the back of the recliner. When the lever is actuated
it pulls on the cable which in turn pulls on a hinge, depressing a button at the end of the
gas spring rod. If the gas spring does not unlock when the lever is actuated or if it remains
permanently unlocked when the lever is actuated, the cable must be adjusted.
Adjusting Cable Tension
1. Remove the one screw and cable clip which secure the
cable to the upholstered back. Remove the gas spring
from the recliner by disassembling the two ring cotter
pins and the two clevis pins that secure the gas spring to
the back / frame.
2. Lower the back until it rests on the stop bars on the
recliner frame. Loosen the lock nut on the gas spring.
3. Hold the hinge assembly while turning the gas spring until
the cable just becomes taut. Back off the gas spring an
additional half turn.
Info: If the gas spring was not unlocking when the
lever was actuated, the gas spring must be turned
Adjusting Cable Tension 1
clockwise. If the gas spring was not locking when the
lever was released, the gas spring must be turned
counter-clockwise.
4. Retighten the lock nut.
5. Reassemble the gas spring to the back of the recliner by
replacing the clevis pins, bridge pins, and re-attach cable
to back of recliner with the screw and cable clip.
6. Actuate the recliner in accordance with the operating
instructions to verify correct adjustment.
Adjusting Cable Tension 2
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
13
Download from Www.Somanuals.com. All Manuals Search And Download.
LUMEX CLINICAL CARE RECLINERS WITH HEAT AND
MASSAGE FEATURE
INSTALLATION AND OPERATING GUIDE
Series FR587WH
1
Tools required: /4" hex wrench and Phillips Screwdriver
. WARNING:.Important!.Read.and.understand.these.instructions.before.assembling.
or using.the.Specialty.Healthcare.Seating.Heat.and.Massage.Unit..If.you.do.
not.understand.any.part.of.these.warnings,.cautions.or.instructions,.contact.a.
healthcare.professional.for.direction.in.the.use.of.this.product..If.the.Heat.and.
Massage.Unit.is.not.properly.assembled,.personal.injury.and.damage.to.the.Heat.and.
Massage.Unit.could.result.
. WARNING:.The.recliner.seat.and.back.heating.elements.are.wired.to.operate.in.
series.only..Do.not.change.the.system.wiring.in.any.way.
. WARNING:.If.components.are.damaged.or.missing,.contact.your.Graham-Field.
authorized.distributor.immediately..DO.NOT.use.substitute.parts..Use.only.Lumex.
replacement.parts..The.use.of.non-Lumex.replacement.parts.could.cause.personal.
injury,.property.damage,.and.void.the.warranty.
. WARNING:.GF.Health.Products,.Inc..assumes.no.responsibility.for.any.damage.or.
injury.caused.by.improper.assembly.or.use.of.this.product.
Description
The Lumex Specialty Healthcare Seating Heat and Massage Unit is a low-voltage (12V)
Heat and Massage Unit, controllable by the user and / or caregiver, designed to enhance
the comfort of the patient / resident during the use of Lumex Clinical Care Recliners. The
Heat and Massage Unit offers three levels of seat and back heat, as well as a gentle or firm
massage function for just lower back or both lower and upper back.
Connection
The Heat and Massage Unit comes pre-installed
in Lumex Clinical Care Recliners with the Heat
and Massage Option (FR587WH). During recliner
shipment, the Heat and Selector Switch connections
are disconnected. Several easy connections are all
that is required to make the unit functional.
Main Components
1. The Selector Switch (shown at right), in the
switch box mounted on the right side of the
recliner underneath the armrest, is a single
multi-position switch that activates both the
Heat and Massage functions.
selector switch
Selector Switch (Mounted
Underneath Right Armrest)
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2. The control module, the
brains of the system, is inside
the junction box. Both are
shown at right.
3. The power supply, which has
an 8-foot power cord that
plugs into the wall power
outlet, is shown at right.
Control Module (Junction
Box Cover Removed)
Junction Box
Power
Supply
ball lock
pin
left
side table
Heat and Massage Unit Setup Instructions
. CAUTION:.To.prevent.personal.injury.and.damage.to.the.recliner.
always.obtain.assistance.when.positioning.the.recliner.as.
instructed.in.the.following.sections.
1. Install the back assembly and gas spring on the seat frame with
the clevis pins and clips supplied with the recliner as indicated
previously in the recliner Assembly and Operating Manual.
Remove
Left Side Table
2. Remove the left side table (on the side opposite the mounted
switch box) from the recliner to prevent damage to it during setup:
Withdraw the ball lock pin, shown at right, and set ball lock pin and
table aside.
3. Place a protective cover or drop cloth on your workbench or floor
to protect the recliner frame finish and upholstery. With assistance,
carefully roll the recliner and rest it on its left side to provide
access to the seat bottom, as shown at right. If desired, for better
access, you may roll the recliner completely upside down. Carefully
extend the footrest partway for access to the components, as
shown at right.
Roll Recliner
onto its Left Side
. WARNING:.DO.NOT.place.your.hands.in.the.path.of.the.moving.
recliner.mechanism..Moving.parts.could.cause.personal.injury.
1
4. Use a /4" hex wrench to remove the two hex head screws that
secure the junction box cover (see picture of junction box at top
of page). Remove the junction box cover to expose the control
module.
Insert Cable
Connector Labeled
SWITCH
5. Insert the cable connector labeled SWITCH through the bushing in
the plastic skirt at the bottom of the back cushion as shown at right.
Through Bushing
switch box cable
clamp tabs
6. Insert the cable connector labeled SWITCH into the control module
connector also labeled SWITCH (see picture of control module at
top of page) until its locking tab snaps into place.
screw
clamp
7. See picture at right. Use Phillips screwdriver to remove the screw
that secures the cushioned cable clamp. Remove the clamp and
place it around the switch box cable. Slide the clamp over the cable
until the holes in the clamp tabs are in line with the screw, then
pinch them closed. Insert the screw through the clamp tabs, then
reinstall the screw and tighten it with a Phillips screwdriver.
Secure Switch Box
Cable Clamp
8. Route the cables from the back cushion between the rear seat
frame crossbar and seat bottom.
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
15
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Insert the Y-cable connector labeled UPPER into the back cushion
cable connector also labeled UPPER until its locking tabs snap into
place, as shown at right.
10. Insert the Y-cable connector labeled LOWER into the back cushion
cable connector also labeled LOWER until its locking tabs snap into
place, as shown at right.
Connect Upper
and Lower Cables
11. Insert the Y-cable connector labeled MASSAGE into the control
module connector also labeled MASSAGE (see picture of control
module at top of previous page) until its locking tab snaps into
place.
12. Insert the seat cushion cable connector labeled HEAT A into the
back cushion cable connector also labeled HEAT A until its locking
tabs snap into place, as shown at right.
Connect HEAT A
Cables
13. Insert the cable connector labeled HEAT into the control module
connector also labeled HEAT (see picture of control module at top of previous page)
until its locking tab snaps into place.
14. Place the cable labeled HEAT A inside the junction box. Replace the junction box cover;
replace the two hex head screws that secure the junction box cover (see picture of
1
junction box at top of previous page). Use a /4" hex wrench to secure the screws.
15. Gather loose cable sections and secure them with the plastic cable ties furnished (see
picture of junction box at top of previous page).
16. With assistance, carefully return the recliner to its upright position.
17. Reinstall the left side table with the ball lock pin.
18. The Heat and Massage Unit is now ready for operation. Instructions for use follow.
s. NOTICE:.Before.rolling.the.recliner,.ensure.the.power.cord.is.unplugged.from.the.AC.
outlet.
Heat and Massage Unit Operation Instructions
1. Plug the power supply cord into any grounded outlet.
2. The Heat and Massage Unit is operated
using the single multi-position selector
switch located on the right side of the
recliner underneath the armrest. The
Heat and Massage Functions can be
operated independently. The selector
switch faceplate is shown at right.
3. Press the selector switch UP to activate
the HEAT FUNCTION.
4. Press the selector switch DOWN to
activate the MASSAGE FUNCTION.
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
16
Download from Www.Somanuals.com. All Manuals Search And Download.
5. The selector switch has THREE HEAT FUNCTION SETTINGS and FOUR MASSAGE
FUNCTION SETTINGS as follows:
a. HEAT FUNCTION SETTINGS:
1) Press selector switch UP for Setting 1: High Heat, 106°F (41°C), brightest LED.
2) Press selector switch UP AGAIN for Setting 2: Medium Heat, 104°F (40°C), bright
LED.
3) Press selector switch UP AGAIN for Setting 3: Low Heat, 100°F (37°C), dim LED.
4) Press selector switch UP AGAIN: Heat function shuts off.
5) There is a small red indicator light, which illuminates only during the Heat
function, in the selector switch. The light's brightness is determined by the Heat
level being used: Brightest = High Heat; Dimmest = Low Heat.
b. MASSAGE FUNCTION SETTINGS:
1) Press selector switch DOWN for Setting 1: Gentle Lower Back Massage.
2) Press selector switch DOWN AGAIN for Setting 2: Firm Lower Back Massage.
3) Press selector switch DOWN AGAIN for Setting 3: Gentle Upper and Lower Back
Massage.
4) Press selector switch DOWN AGAIN for Setting 4: Firm Upper and Lower Back
Massage.
5) Press selector switch DOWN AGAIN: Massage function Shuts Off.
6. The Heat and Massage Unit automatically shuts off at the following times:
a. HEAT FUNCTION: After one hour of continuous use at the same level.
b. MASSAGE FUNCTION: After fifteen minutes of continuous use at the same level.
c. To restart the Heat and Massage Unit, follow the instructions above.
Heat and Massage Unit Troubleshooting Guide
The cables and connections need to be validated. This will require the services of a
maintenance person and a clear working area.
1. INSPECTION: Perform the following checks. If a working recliner of the same model is
available, it should be used for comparison.
2. Is the AC cord properly connected to the power supply? Is the cable from the power
supply to control module junction box in place?
3. With the power supply AC cord plugged into a live wall outlet, does the small light to the
left of the white seat symbol (located on the switch) light up when the switch is pressed
repeatedly or is there any indication of massage operation?
. WARNING:.Disconnect.the.power.cord.from.the.wall.outlet.before.performing.the.
following.steps!
a. Is the switch seat symbol oriented so that the back is vertical with the three arrows
pointing up? Is the switch loose in the box?
b. Is there any sign of external damage to the switch, switch box or the surrounding
area?
c. Is there any sign of external damage to the recliner?
d. Do any of the cables show any sign of damage or pinch points?
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
17
Download from Www.Somanuals.com. All Manuals Search And Download.
e. Are all cable connections to the control module (in the junction box) in place per the
instructions? Are the connectors fully engaged?
f. Are any of the connectors damaged?
g. Are the wires within the connectors attached to the pins? Each wire may have to be
tugged lightly to check if the wire is still crimped to the pin.
4. POST-INSPECTION:
a. If improper or loose connections are found, reconnect them firmly (unless a loose
wire has been found). Plug the power supply AC cord into a live wall socket and
operate the unit through all functions.
b. If the switch seat symbol is rotated or there is evidence of damage to the box and
cable notify Graham-Field so that a switch box and cable can be sent for replacement.
c. If damage to any other electrical cable or component, or disconnected wires are
found, please notify Graham-Field.
5. ACTIONS:
a. If full operation is restored, please advise Graham-Field of your successful outcome.
b. If the fault cannot be corrected by simple re-connection, please inform Graham-Field
of the results of your inspection in detail so that we may determine the appropriate
action to be taken.
If you have any questions about the setup and / or operation of the Heat and Massage
Unit, please call the Graham-Field Technical Support Group at 770-447-1609.
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE
. WARNING:.Inspect.all.components.periodically.and.replace.as.needed.
EVERY THREE MONTHS
• Check and clean casters.
• Tighten bolts in each leg that secure caster into frame.
• Check brakes on casters.
• Check and clean lock recline mechanism.
• Check recliner mechanism for operation in all positions, including Trendelenburg
Position, with assistant seated in recliner.
UPHOLSTERY MAINTENANCE AND STAIN REMOVAL
• Ordinary dirt: wash with warm water and a mild soap or detergent.
• Stubborn dirt: using a soft bristle brush, wash with warm water and a mild soap or
detergent.
• Ground-in dirt: scrub with powdered cleanser or similar detergent.
• Chewing gum: scrape carefully; remove with kerosene or naphtha.
• Nail polish and remover: Blot immediately to prevent damage.
• Ball point pen: blot immediately with a white cloth dampened in water or mineral oil.
• Paint, shoe polish, heel marks: remove immediately! Use a white cloth dampened in
kerosene, naphtha or turpentine. Do not use paint remover or liquid brush cleaners.
• Tars, asphalt, creosote: remove to prevent staining. Clean area with kerosene or
naphtha.
. WARNING:.When.using.kerosene.or.naphtha,.do.so.in.a.well.ventilated.area.and.keep.
it.away.from.fire,.flame,.and.recliner.occupant.
• Waxing and refinishing: improves wearability. Use any quality paste wax.
• A diluted solution of 10% (or less) of bleach or Clorox may be used when cleaning this
recliner.
PERMABLOK3® Care and Cleaning Guide — Advanced Vinyl Protection
• Step 1 (eye shadow, mascara, grease, black felt tip pen, crayon, chocolate, suntan lotion,
hair and body oils): remove excess spill with a damp cloth. Clean with a 1:1 mix of
Ivory® liquid soap and water. Next, rinse with clean water and dry.
• Step 2 (red lipstick): use a straight application of concentrated cleaners such as Formula
409® or Fantastik® spray cleaner. Wipe with a clean cloth, rinse with water, and dry.
• Step 3 (blood, urine, feces, oil base paint, tar, and asphalt): use a 1:1 mix of ammonia and
water, or a 1:4 mix of bleach and water. Rinse with clean water and dry.
• Step 4 (all other tough stains): use a straight application of naphtha (lighter fluid). Rinse
thoroughly with clean water and pat surface dry. If the stain persists, go to step 5.
• Step 5: use a 1:1 mix of isopropyl alcohol and water. If the stain persists, use straight
alcohol. Rinse thoroughly with clean water and pat dry.
Info: For cleaning that requires step 4 or 5, use a soft cotton cloth saturated with
the cleaning material and rub the stain in circles 10 times. Pat dry with another
soft cotton cloth and check the results.
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
19
Download from Www.Somanuals.com. All Manuals Search And Download.
The information published in this care guide refers to the performance of PERMABLOK3
products in specific tests conducted under laboratory conditions. Results may vary under
actual conditions.
This information is not a guarantee and does not relieve the user from the responsibility of
the proper and safe use of the product and all cleaning agents. The use of certain agents can
be harmful to the surface appearance and lifespan of vinyl. Spradling, its agents, and assigns
assume no responsibility resulting from the use of such cleaning agents to the vinyl.
Please check compatibility when using this product in combination with painted or
varnished surfaces.
PERMABLOK3 is a registered trademark of Spradling Holdings, Inc.
Ivory is a registered trademark of Procter and Gamble.
Formula 409 is a registered trademark of The Clorox Company.
Fantastik is a registered trademark of S.C. Johnson & Son, Inc.
Spradling International is not sponsored by, affiliated with, or endorsed by such trademark
owners.
CDC RECOMMENDATIONS
CLEANING AND DISINFECTING STRATEGIES FOR ENVIRONMENTAL
SURFACES IN PATIENT-CARE AREAS FOR VINYL UPHOLSTERY, WALL
COVERINGS AND FLOORING
• Select EPA-registered disinfectants, if available, and use them in accordance with the
manufacturer’s instructions.
• Do not use high-level disinfectants / liquid chemical sterilants for disinfection of either
noncritical instruments and devices or any environmental surfaces; such use is counter
to label instructions for these toxic chemicals.
• Follow manufacturers’ instructions for cleaning and maintaining noncritical medical
equipment.
• In the absence of a manufacturer’s cleaning instructions, follow certain procedures:
• Clean noncritical medical equipment surfaces with a detergent / disinfectant.
• Do not use alcohol to disinfect large environmental surfaces.
• Use barrier protective coverings as appropriate for noncritical surfaces that are:
• Touched frequently with gloved hands during the delivery of patient care.
• Likely to become contaminated with blood or body substances.
• Difficult to clean (e.g., computer keyboards).
• Keep housekeeping surfaces (e.g., floors, walls, tabletops) visibly clean on a regular
basis and clean up spills promptly.
• Use a one-step process and an EPA-registered hospital detergent / disinfectant designed
for general housekeeping purposes in patient-care areas where:
• Uncertainty exists as to the nature of the soil on the surfaces (whether it is blood or
body fluid or just normal dust or dirt).
• Uncertainty exists regarding the presence of multi drug resistant organisms on such
surfaces.
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
20
Download from Www.Somanuals.com. All Manuals Search And Download.
• Detergent and water are adequate for cleaning surfaces in nonpatient-care areas (e.g.,
administrative offices). Clean and disinfect high-touch surfaces on a more frequent
schedule than minimal-touch housekeeping surfaces. Clean walls, blinds, and window
curtains in patient-care areas when they are visibly dusty or soiled.
• Do not perform disinfectant fogging in patient-care areas.
• Avoid large-surface cleaning methods that produce mists or aerosols, or disperse dust in
patient-care areas.
• Follow proper procedures for effective uses of mops, cloths, and solutions.
• Prepare cleaning solutions daily or as needed, and replace with fresh solution
frequently according to facility policies and procedures.
• Change the mop head at the beginning of each day and also as required by facility
policy, or after cleaning up large spills of blood or other body substances.
• Clean mops and cloths after use and allow to dry before reuse; or use single-use,
disposable mop heads and cloths.
• When performing low- or intermediate-level disinfection of environmental surfaces in
nurseries and neonatal units, avoid unnecessary exposure of neonates to disinfectant
residues on these surfaces by using EPA-registered germicides in accordance with
manufacturers’ instructions and safety advisories.
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATIONS
Overall.Height
50"
33"
36"
23"
Overall.Width
Overall.Depth
Width.Between.Arms
Arm.Height.from.Floor
Arm.Height.from.Seat
Seat.Height
1
26 /2"
8"
1
21 /2"
1
Seat.Width
23 /2"
1
Seat.Depth
20 /2"
Depth.Fully.Reclined.in.Trendelenburg
Width.with.Both.Side.Tables.in.Upright.Position
Shipping.Weight
76"
53"
1
138 /2 lb
Maximum.Weight.Capacity
450 lb, EVENLY DISTRIBUTED
For complete technical specifications, please call the Graham-Field Technical Support
Group at 770-447-1609.
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
22
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
GF Health Products, Inc. (“Graham-Field”) warrants the FR587W Deluxe Extra Wide Clinical
Care Recliner and FR587WH Deluxe Extra Wide Clinical Care Recliner with Heat and Massage
against manufacturing defects in materials and workmanship as listed below:
Welded Frame.................... Lifetime limited (ten years)
Heat and Massage Unit..... Two year limited
Upholstery ......................... One year limited
All Other Components...... Three year limited
If a product is deemed to be under warranty, GF Health Products, Inc. shall provide, at its
option, (1) replacement of any defective part or product or (2) a credit of the original selling
price made to GF Health Products, Inc.’s initial customer. The warranty does not include
any labor charges incurred in replacement part(s) installation or any associated freight or
shipping charges to GF Health Products, Inc.
The warranties contained herein contain all the representations and warranties with
respect to the subject matter of this document, and supersede all prior negotiations,
agreements and understandings with respect thereto. The recipient of this document
hereby acknowledges and represents that it has not relied on any representation, assertion,
guarantee, warranty, collateral contract or other assurance, except those set out in this
document.
FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions
23
Download from Www.Somanuals.com. All Manuals Search And Download.
GF Health Products, Inc.
2935 Northeast Parkway
Atlanta, Georgia 30360 USA
Telephone: 770-368-4700
Fax: 770-368-2386
Technical Support: 770-447-1609
Download from Www.Somanuals.com. All Manuals Search And Download.
|