Operating Manual
Equipment
Auro 2216 PS
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control Assist – DVD-operation
(page 38)................................................TV Sound off/on
LED indicator for current operating mode
Switch on/off - on stand by.............................. (page 11)
Switch over to operate TV set
Switch over to operate Recorder
(page 18) .......................................................Sleep timer
DISK: Set TV picture format;
short: TV Radio Digital; long: Auro FM/AM-Radio .(p. 36)
Switch over to operate Auro ............................ (page 11)
Select sound format......................................... (page 38)
(page 37).........................................RADIO: Mono/Stereo
DISC: select chapter/title RADIO: select stored station
MENU: enter digits .......................................... (page ꢀ0)
MENU: enter numbers or letters....................... (page ꢀ0)
(page ꢀ3)....................................................DISC: Repeat;
RADIO: display RDS name/frequency of station
(page 18)..............DISC: User interface of loaded DVD on
(page 16)............Show/hide menu; MENU: close window
Select external audio source ............................ (page 15)
DISC: Repeat A-B; RADIO: FM/AM-mode ... (page ꢀ3, 36)
DISC: menu bar on/off; MENU: context help on/off
DISC: Status display on/off; RADIO: station table
MENU: hide menu .................................... (page 16, 19)
P+/P– DISC: next/previous chapter;
(page 38)................................... V–/V+ Volume down/up
RADIO: station forward/back ..................... (page ꢀ0, 36)
56DISC: chapter up/down; MENU: select up/down
34DISC: search back/forward; MENU: select/set
(page 16, 17)...................... DISC: Title/Chapter overview;
RADIO: station table; MENU: confirm menu selection
(page 19)................ Green button: Title/Chapter selection
(page ꢀꢀ, ꢀ3)..............Red button: DISC: camera position
Yellow button: Zoom........................................ (page ꢀ3)
Blue button: Set marker................................... (page ꢀ4)
DISC: short: beginning of chapter; long: search back
RADIO: short: fine tuning back long: search back
no function
Playback.......................................................... (page 19)
DISC: short: next chapter/title; long: search forward
RADIO: short: fine tuning forward; long: search forward
Stop................................................................. (page ꢀ1)
(page ꢀ1)......................Pause; single frame; slow motion
3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Auro 2216 PS Front Panel
Operating
indicator
Disc tray
Display
Front flap
(closed)
THEATER
REPEAT
1
ALL
A
B
SLEEP
TUNED
STEREO
PCM dts
DIGITAL
MUTE
RDS
MEMORY PROGRAM RANDOM REMAIN
PRO LOGIC
STEREO
TITLE
CHP/TRK
3
Source
Vol -
Vol +
DVD
MP3
CD
MHZ
kHZ
1234567890
D
S
I
G
I
T
A
N
L
U
R
R
O
U
D
Disc tray
open/close
Power button
Switch off in standby
Previous
chapter
Next
chapter
Stop
Play / Pause
Headphones jack
THEATER
REPEAT
1
ALL
A
B
SLEEP
TUNED
STEREO
PCM dts
DIGITAL
MUTE
RDS
MEMORY PROGRAM RANDOM REMAIN
PRO LOGIC
TITLE
CHP/TRK
3
DVD
MP3
STEREO
CD
Source Store
Vol -
Vol +
MHZ
kHZ
1234567890
Front flap
(open)
Select sound
source
Save
Search -/+
(radio)
Control volume
- 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Auro 2216 PS Rear Panel & Display
Mains cable
Analog audio Digital audio
input (AUX 1) input (AUX ꢀ)
Euro-AV output; TV COMPONENT
picture (RGB/CVBS) VIDEO OUT (Y Pb
Antenna input
AM (medium
Antenna input
FM (VHF)
and sound (stereo Pr) Connection for a wave)
analog) *
TV with component
inputs (Cinch) *
Multi-channel audio out-
puts; to speaker system
(Tremo) or active speakers
Analog au- Digital au-Cubic
dio output dio outputsocket
L-Link con- VIDEO OUTPUT switch Position SCARTR: TO TV socket gives out the RGB sig-
nections nal and COMPONENT VIDEO OUT socket does not supply a signal Position
COMP.: COMPONENT VIDEO OUT socket gives out the RGB signal and TO TV
socket does not supply a signal
* Please note the position of the switch here.
Caution: Do not touch the inner pins of connection sockets on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
to the status line:
Status line
REMAIN
Remaining playing time (DVD/CD).
TITLE
CHP/TRK
REPEAT
1 ALL
Current title (DVD/CD).
Current chapter/title (DVD/CD).
Repeat chapter/title (DVD/CD)
Repeat disc (DVD/CD)
MHZ
kHZ
1234567890
Message line
Symbol range
TUNED
RDS
Adequate reception quality (tuner)
Station with RDS name (tuner)
see page 40
STEREO
RANDOM
CD Random (DVD/CD)
5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
• The mains plug must be easily accessible so that the unit can be disconnected
at any time.
Thank you,
• Lay the cable in such a way that it cannot get damaged. The power cable
should not be kinked or laid over sharp edges, not stood upon or exposed to
chemicals - the latter also applies to the device as a whole. A mains cable with
damaged insulation can cause electric shocks and is a fire hazard.
• When removing the power plug, pull the body of the plug, and not the cable.
Otherwise, the wires in the plug could get damaged and cause a short circuit
the next time it is plugged in.
for choosing a Loewe product. We are happy to welcome you as our customer.
At Loewe we combine the highest standards of technology, design and user
friendliness. This is equally true of TV, DVD, video, audio and accessories.
Neither technology nor design is an end in itself, but both are intended to
provide our customers with the best possible audio and visual experience.
Our design is not influenced by short-term, fashionable trends. You have,
after all, purchased a high-quality piece of equipment which you do not want to
get tired of looking at tomorrow or the day after.
You should also read and follow the safety advice on the following pages.
You can control four units with the remote control, a Loewe TV set, a Loewe
video recorder or a Loewe DVD recorder in addition to this DVD preceiver.
Disposal
Cardboard box and packaging
Scope of delivery
You have opted for a durable and technically sophisticated product. In line with
national regulations regarding the disposal of packaging materials, we pay a fee
to authorised recyclers who collect packaging from dealers. However, we recom-
mend that you keep the original cardboard box and the rest of the packaging
materials so that the unit can, if necessary, be transported in the safest possible
conditions.
• DVD-Preceiver Loewe Auro ꢀꢀ16 PS
• Assist remote control with ꢀ batteries
• Euro AV cable (Scart cable)
• Cubic plug cable
• L-Link cablel
• Audio cinch cablel
• Digital-Audio-Cinch-cablel
• Antenna cablel
• AM antenna
The unit
Important: The EU Directive ꢀ00ꢀ/96/EG governs the proper
re-acceptance, handling and recycling of used electronic appli-
ances.
Old electronic appliances must therefore be disposed of
separately.
• this operating manual
Set up
• Place the DVD-Preceiver on a firm, level base.
• Do not place the DVD-Preceiver in the vicinity of sources of intense heat or in
direct sunlight.
• When installing in a cabinet or enclosed shelf: Leave about ꢀ.5cm free space
around the DVD Preceiver for unhindered air circulation to prevent build-up of
heat.
Never throw this set in the normal domestic waste. You can hand in your old set
free of charge at identified collection points or at your dealer if you buy a similar
new set. Other details about re-acceptance (also for non-EU countries) are avail-
able from your local administration.
• There can be interference to the images and sound of any nearby television,
video recorder or radio. If this occurs, do not place the unit near to a televi-
sion, video recorder or radio, or switch the unit off after removing the disc.
• Install the DVD-Preceiver where there is nothing to obstruct the remote con-
trol‘s infrared signal from reaching the DVD-Preceiver display.
• Do not place strong artificial light sources in front of the device. This may
affect infrared reception.
• If there is an electrical storm, disconnect the antenna and mains plug. Power
surges caused by lightning strikes can damage the unit through the antenna
system or the mains.
• The antenna and mains should also be disconnected if the unit is to remain
unsupervised for a long period of time.
- 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
PLEASE NOTE: TO AVOID RISK OF ELECTRICAL SHOCK, DO NOT REMOVE THE
COVER (OR THE REAR OF THE UNIT). THERE ARE NO PARTS INSIDE THE UNIT
THAT CAN BE REPAIRED BY THE USER. REPAIRS SHOULD ONLY BE CARRIED OUT
BY A LOEWE DEALER.
Cleaning
• Only clean your DVD-Preceiver with a damp, soft, clean cloth (with no aggres-
sive cleaning agents).
• If DVD-Preceiver fails to read the disc correctly, the reader unit in the device
may be soiled. Use a commercially-available cleaning disc.
• Always keep the disc drawer closed to prevent dust getting into the drawer
and onto the lens.
If you have moved the DVD-Preceiver from a cold to a warm environment,
leave it to stand for about an hour because of the risk of condensation building
up. Do not switch it on until it has reached room temperature. This will avoid
seriously damaging the components.
For your safety
For your own safety and to avoid unnecessary damage to your unit, please read
and follow the safety advice below:
Read this operating manual, and experiment with your new equipment‘s features
so that you are familiar with it.
• This DVD-Preceiver is only to be used for receiving, displaying and playing
visual and sound signals.
Advantages of connection to a Loewe TV set
• Switch off your DVD system (Centros, TV and any other audio components
which may be connected) before connecting or disconnecting other devices or
speakers.
If you connect your Auro to a Loewe TV, you are able to enjoy the Loewe system
communication ”L-Link”. With L-Link, Auro and your TV join forces in an intel-
ligent network and form a high-performance home cinema system.
Auro and the TV exchange data via the L-Link, among other things to check
whether audio data are available (screen stays off) or whether audio and video
data are available (screen switches on automatically).
Thanks to L-Link your TV assumes that Auro will take over processing of all audio
signals within the equipment network. The Auro switches on automatically when
you switch on the TV.
You can operate the whole equipment network with ”one hand” using the Assist
remote control.
• Do not open up the hous-
ing, or you could be directly exposed to the laser beam. The laser beam will be
visible if the unit is open.
DO NOT LOOK INTO THE LASER BEAM.
Technical requirements for L-Link
• Loewe TV of chassis generation Q/S/Pꢀ5xx TV software as of Version 6.0; if
your TV is equipped with an older software, please contact your Loewe dealer
for a software update
• • L-Link cable connection must be established in a powerless state; see page
8/9.
Protect your DVD-Preceiver from:
• liquids and damp
• shock and mechanical stress
• magnetic and electrical fields
• cold, heat, direct sunlight and extreme fluctuations in temperature
• dust
• Auro must be connected to the Euro AV-input AVꢀ/3 of the TV; see page 9.
• anything which obstructs ventilation
• manual interference with the unit‘s interior
Your Auro has only been designed for use in a domestic environment. The war-
ranty covers this normal use of the DVD-Preceiver.
7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
Connection
AM-antennae (medium wave)
line cord
FM-antennae (VHF)
Attention: : All the devices involved must be disconnected from the mains
when you are connecting the cables.
Connecting antennae
Connect the antennae for VHF (FM) and medium wave (AM) as shown in the
drawing:
• Connect the enclosed AM antenna to the appropriate terminals – the light
insulated wire to terminal ”AM”, the dark insulated wire to terminal ”GND”.
• Make sure the AM antenna and the TV are a great distance apart because the
TV interferes with AM reception when it is on.
• Connect the antenna input ”FM” to an antenna system or FM antenna. Do not
use a cubical antenna if possible because the reception performance of cubical
antennae is usually unsatisfactory.
- 8
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
Wiring Loewe Flat TV – Auro – Individual Sound/Tremo
Audio cable cinch -> SCART
(available in specialised
trade)
Loewe Flat-TV
AV2-SCART
Surround speaker system
CENTER
AUDIO OUT L/R
DIGITAL OUT
COMPONENT IN
Loewe Individual Sound/Tremo
SERVICE
Component Video
(available in specialised
trade)
ON
Power OUT
Digital audio TV -> Auro
R
L
Surr.
OFF
R
C
L
Front
Bass Intensity
EURO-AV-cable
Min.
0
Max.
Phase
Center to
Loewe
Auro
Line IN
only required with TV as
centre spreaker
Sat
TV
180
Right Subw. Left
Surr.
Slave
Front
Right Center Left
Y
PREOUT
C
AUX1 IN AUX OUT AUX
2
System connector
Master
L
R
L
L
TO TV
DIGITAL
IN
Pb
230V~50/60Hz
DIGITAL
OUT
TV
EXT
Pr
SL
LFE
SR
R
R
COMPONENT
VIDEO OUT
12V / 15mA
L-LINK
L-Link-cable
Six-pole cinch
Cubic plug cable
Connect the cables as shown in the graphic:
• Connect the Auro to socket AVꢀ of the Loewe Flat TV. If your Loewe TV set has
three AV sockets, use socket AV3.
• You must use a Euro-AV cable in which all contacts are connected with each
other (ꢀ1-fold as in the case with the enclosed cable).
• To get a better picture quality, use a three-wire cinch cable and connect it to
Auro “COMPONENT VIDEO OUT“ and “SD/HD-COMPONENT IN“ of the TV set.
Pay attention to the exact polarity of the Y/Cb/Cr signals. In addition you have
to switch the “VIDEO OUT SELECTOR“ switch on the back of the Auro to the
“COMP.“ position.
• Letters are embossed on the sides of the plugs on the six-wire cinch cable:
gray plug: ”C” for center channel; black plug: ”LFE” for subwoofer; red plug:
”FR” for front right or ”SR” for surround right; white plug: ”FL” for front left or
”SL” for surround left.
• For TV as center loudspeaker use a cinch cable to connect “AUDIO IN C“ on
the TV set with “PRE OUT C“ on the DVD Preceiver (the connection of the gray
plug “C“ between Auro and Individual Sound/Tremo is omitted). In addition,
you have to move the ”Center to” switch on the back of Individual Sound/Tre-
mo to the ”TV” position (switch must be pressed); see the separate operating
manual for Individual Sound/Tremo.
• To play the TV sound over Auro/Individual Sound/Tremo, connect the digital
audio output of the TV set “AUDIO DIGITAL OUT“ with the “DIGITAL IN“ input
from Auro with a cinch cable.
• When establishing the L-Link, Auro and the TV must be in the powerless state,
otherwise, these devices cannot identify each other after switching on; for
L-Link see page 7.
• You can connect an additional external analogue source to the analogue audio
input AUX 1 IN.
• Two-wire (thin) cubic plug cable from Auro to the “Master” socket on Individ-
ual Sound/Tremo (connect the end of the cable with kink protection to Auro).
The cubic plugs are secured in the socket by a lug. You have to press down the
lug first before you can remove the cubic plug.
• Audio cable cinch -> SCART (available in specialised trade) for use of the
component signal and “TV as centre loudspeaker“ - see note on page 4ꢀ.
9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
Wiring Auro – audio system
Remote control
Inserting the batteries
e.g. MP3 Player
To insert or change the batteries, press on the point indicated by an imprinted
arrow. Push the battery compartment cover down and remove it. Insert batteries
of the alkaline-manganese LR 03 (AAA) type and make sure the + and – poles
are the right way round.
Loewe
Auro
Y
PREOUT
C
AUX1 IN AUX OUT AUX
2
L
R
L
L
TO TV
DIGITAL
IN
Pb
Pr
DIGITAL
OUT
TV
EXT
SL
LFE
SR
R
R
COMPONENT
VIDEO OUT
12V / 15mA
L-LINK
Aktive 5.1 loudspeaker system
e.g. Loewe Individual Sound/Tremo
ON
Then push the cover back on from below.
OFF
Satellite Speaker OUT
PRE IN
Note on disposing batteries
The batteries provided contain no harmful materials such as
cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries
may no longer be thrown out with the household rubbish.
Deposit any used batteries free of charge into the designated
collection containers set up at commercial businesses. You can
dispose used batteries also at your dealer.
Satellite loudspeakers
Connect the cables as shown in the graphic:
• Use a six-wire cinch cable to connect the PRE OUT outputs of the Auro to the
corresponding inputs of the active 5.1 loudspeaker system.
• You can connect an additional external analogue source to the analogue audio
input AUX 1 IN.
• Set the loudspeaker system to Auro as described on page 13.
• Set the limit frequency for the bass speaker on your active 5.1 loudspeaker
system to at least 100 Hz.
- 10
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
Switching on for the first time
Go with 6to the item “Language Presettings“.
Power mains
Press 4.
Connect the TV set to a 220-240V/50- 60 hertz power outlet.
The “Language Presettings“ window opens:
DVD menu
Note: First, read section ”About operation” on pg. 15/16 to find out about the
basic operation of Auro.
Languages Presettings
Subtitle active
Subtitle
Film
Menu on DVD
DVD Player Menu
yes no
English
English
English
Press the button on the front of the device
or
set the remote control to DVD-Preceiver mode and switch on
DVD/CD
Info
Back
End
or
Go with 6 to the item “DVD Player menu”.
press the button on the remote control briefly and switch on
radio.
Auro is switched on, DVD/CDappears in the display. This indicates that the
DVD/CD sub-unit is switched on.
Shortly afterwards, the message READINGappears in the display. Now Auro
tries to read the disc in the drive. NO DISCappears in the display if there is
no disc in the drive.
Press 4.
The “Language DVD Player Menu“ window opens:
DVD menu
Language DVD Player menu
Setting the language
Deutsch
English
Español
Français
Nederlands NL
Italiano
D
GB
E
First, set the desired language for the Auro menus. English is the default. Pro-
ceed as follows to set the language of your choice:
F
There is no disc in the drive and the drawer is closed.
I
Press the button.
Info
Back
Ende
The DVD menu is displayed.
DVD menu
Go with 65 to the language of your choise.
Play from
Markers
Settings
Language Presettings
Sound
11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
Switch over PAL/NTSC
DVD menu
Auro is set to the PAL TV norm at the factory. If your TV is set to another standard
(NTSC), you have to adapt the Auro setting accordingly. There is no disc in the
drive and the drawer is closed.
Language DVD Player Menu
Deutsch
English
Español
Français
D
GB
E
If Auro is switched on: keep the Pause button on the device
or on the remote control
pressed for five seconds.
F
NTSC, appears in the device display, Auro is then set to the NTSC TV standard.
In the same way, you can set the Auro to AUTOor PAL.
Nederlands NL
Italiano
I
In the AUTOAUTO setting, Auro automatically detects whether a PAL or an
NTSC-DVD is inserted and switches over to the respective standard.
Accept with OK
Info
Back
End
Doing a reset
Press the button OK .
You can reset all settings in Auro to their original values with a Reset.
The state prior to initial installation (Factory Setting) is reinstated.
If Auro is in standby mode (red standby indicator lights) and the remote control
is set to the DVD/CD mode:
The selected language is then set as Auro’s user interface
language.
The DVD menu is closed when you press the END button.
1. Press the button
ꢀ. Also press the
on the remote control and hold it down.
button on the device and hold it down.
Activate Digital Link
3. Keep both the buttons held down for at least 5 seconds.
Then, Auro switches on, the message RESETappears in the display. The
sub-device DVD/CD is active.
With Digital Link, Loewe TVs pass on the remote control signals to Auro via the
Euro-AV connection. Digital Link is useful when you want to install Auro con-
cealed, e.g. in a closed rack where it cannot be reached by the remote control
signals.
All settings are therefore reset to their original values. You have to perform initial
installation.
Switching on Digital Link
Switching over to Progressive Scan
Auro must be in standby (standby indicator lights red, display is dark). Hold the
button
the device pressed for at least five seconds until the message
With the Progressive Scan mode you get the highest possible picture quality
without flickering in the “Component Video” operating mode. Set the “VIDEO
OUT SELECTOR“ switch on the back of Auro to the “COMP“ position. If Auro is
switched on: Keep the stop button (there is no disc in the drive and the drawer is
LINKappears in the display.
Switching off Digital Link
Auro must be in standby (standby indicator lights red, display is dark). Hold the
closed. / no menu display) on the unit
pressed for five seconds.
button
the device pressed for at least five seconds until the message
P-SCAN ON, appears in the unit display so that Auro is switched to Pro-
gressive Scan mode.
FRONTappears in the display.
In the same way you can set Auro to P-SCAN OFF.
- 1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
Connect speakers
Setting the loudspeaker system
The dialogs for selecting and setting your loudspeaker system are all in the
”Speaker System” window.
Note: This dialog is omitted, if you have selected ”Tremo” as the connected
speaker system.
Selecting the speaker system
If you have selected ”other” as a speaker system:
Go to the item ”Connect speakers”.
There is no disc in the drive and the drawer is closed or an
inserted DVD is in Stop mode.
The DVD menu is displayed.
Press 4.
Go to the item ”Settings”.
The ”Connect speakers” window opens.
DVD menu
Press 4.
The ”Settings” window opens.
Connect speakers
Front speakers
Surround speakers
Centre speaker
Subwoofer
small large
small
small
Go to the item ”Speaker System”.
Press 4.
yes
The ”Speaker System” window opens.
DVD menu
Info
Back
End
Speaker System
System
Connect speakers
Listener/Speaker distances
Adjust Loudspeaker Level
TREMO other
Specify whether you have connected large or small front speak-
ers to Auro.
The Loewe Individual Sound S1 satellite speakers must be
logged in as “small”.
The Loewe Individual Sound L1 standing speakers must be
logged in as “large”.
Info
Back
End
In the graphic overview, you can check whether you have
logged in your speakers correctly.
Select “Tremo” if you have connected 4 satellite speakers (also in Individual
Go to ”Surround speakers” and so on.
Sound).
Note: Some speaker combinations cancel each other out.
If you use ꢀ or 4 Individual Sound standing speakers, select “other”. This also
applies for connecting an active speaker system or a passive system of another
provider.
Press the button.
The ”Connect speakers” window is closed. You are back in the
”Speaker System” window.
Press 34and select “TREMO” or “other”.
13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
Go to the ”Adjust loudspeaker level” item in the ”Speaker
System” window.
Entering the distance between speakers
Open the “Loudspeaker System” menu as described on page
13.
Press 4.
Go to the item ”Listener/speaker Distances”.
The ”Adjust loudspeaker level” window opens.
Press 4
The ”Listener/Speaker distances” window opens.
DVD menu
Adjust loudspeaker level
DVD menu
Level
0
Listener/speaker Distances
Distance A
Distance B1
Distance B2
Distance C1
Distance C2
2.1m
A
B1
B2
C1 C2
Info
Back
End
Info
Back
End
You hear a noise in turn from every single loudspeaker start-
ing with the front left speaker. The speaker is highlighted in
white in the overview (see the figure) whilst the noise is being
emitted from it. You can reduce or increase the volume of this
loudspeaker whilst the noise is being emitted from it.
Listen to all the speakers once first. The perceived volume
should have the same intensity from all speakers.
Set the right distance value A (distance listener from center
loudspeaker). You can change the distance in steps of 0.3 m.
Go to ”Distance B1” (distance of listener from left front
speaker) and set the right distance here, too.
Do the same for all connected speakers.
Press the button.
Is one loudspeaker quieter than the others? Then, increase the
volume level of this speaker (4).
The ”Listener/Speaker distances” window closes. You are back
in the ”Speaker System” window.
Is one loudspeaker louder than the others? Then, reduce the
volume level of this speaker (3).
Repeat the procedure until you are hearing all the speakers at
the same volume.
Adjust loudspeaker level
With this dialog, you can compensate differences in volume between the indi-
vidual speakers. The basic volume of the speaker system should not be influ-
enced with this function.
This completes the setting of your loudspeaker system. To close the DVD menu:
Press the button
.
See the section on audio functions (pg. 38).
Take up your normal listening position.
Set normal volume.
- 14
Download from Www.Somanuals.com. All Manuals Search And Download.
About operation
Auro is a DVD-Preceiver. It covers the scope of functions of a DVD player
(”DVD/CD”) and a radio receiver (”Tuner”) for medium wave (AM) and VHF (FM).
Processing and transfer of the audio signals take place in a pre-amplifier with
different decoders. This allows you to set various sound modes – depending on
the format of the sound source (e.g. DVD, Tuner, TV …).
Basic functions
The basic functions are:
Start playback; button
Pause (single frame); button
Stop; button
Short key press: Go to beginning of chapter
Long key press: Search
Source
You can switch between the sub-devices by either pressing the
button
on Auro or by making the appropriate setting on the remote control. When you
switch over with the buttons on Auro, you must set the RC4A to the correspond-
ing remote control mode. There is no need for this adaptation of the Auro and
the remote control when you switch with the remote control. Therefore, we
recommend you to switch between the sub-devices with the remote control.
When you select the operating mode with the buttons
, the appropriate device is switched on unless it already was.
You can operate the various Loewe units with the RC4A remote control (see page
41).
Operation of the Auro with a DVD inserted is described in this chapter. Operation
is performed with the remote control.
When you insert a DVD in Auro (see pg. 19), you can follow the description
below on your remote control.
Play
A message appears on the screen after calling a basic
function. Auro therefore confirms that it has executed the called function, here,
for example, after pressing the for play.
Note: Even if the remote control is in the ”RADIO” mode you can start playing
a disc with the button. The remote control then changes automatically
to the ”DISC” mode, Auro is switched over to the ”DVD/CD” sub-device, and
playback of the disc begins.
If this message appears, you have pressed a button
Function not possible
which currently has no function.
These messages are hidden automatically after 8 seconds. To hide it earlier: Press
Activate the mode of the remote control
the button
.
User interface
Set the remote control to DVD Preceiver mode.
Every operating mode (DVD, Audio CD, etc.) has its own menu bar and own
menu.
Inserting a disc
Menu bar
Press the button on the device.
Call the menu bar, for example, if you want to use the DVD beyond its basic
functions. The DVD menu bar consists of eight elements. Each of these elements
The disc drawer is opened, OPEN appears in the Auro display.
Place the disc in the drawer with the labeled side up.
Press the button on the device.
stands for a function. Call the menu bar with the
button:
1/2
3/9
Select title (see page ꢀ0).
Select chapter (see page ꢀ0).
The drawer is closed.
1 Deu
D
The Auro display then changes to READING. The media
Select sound format (see page ꢀꢀ).
DVD
type is displayed (the
symbol lights additionally for a
DVD).
Select subtitles (see page ꢀ6).
Camera position (see page ꢀꢀ).
Repeat (see page ꢀ3).
1 Eng
1/3
T
The intro start playing when you insert a DVD. Then, the DVD’s
own user interface is displayed (see pg. 18).
Zoom (see page ꢀ3).
x4
Auto
Sound mode (see page 41).
15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
About operation
Possible operating steps are displayed in the bottom part of all windows of the
DVD menu. In the window displayed here, you can:
Change between the items in the menu bar with 56. A white background
inside an element means: this element is currently active (in the figure: ”Select
chapter”). All the operating steps you now perform relate to this element.
Functions which are currently unavailable are shown in gray in the menu bar
(above, for example, ”Select sound format”).
Press4or 6;
call the context help with the INFO button (see ”Context help”
on pg. 16);
To execute a function: Press the button OK.
If you change the sound format or the language of the subtitles with the menu
bar, this change only applies for the inserted DVD. The presettings from the DVD
menu apply again when you insert another DVD.
close the current window ”Languages Presettings” only with
the MENU button to return to the higher menu level;
To hide the menu bar: Press the button
the individual elements.
. Press
again to get help with
close all windows, i.e. the complete DVD menu, with the END
button.
Menu and window
The structure of these operating instructions varies according to the operating
situation.
Always call the DVD menu when you want to change the basic settings of your
Auro (language, picture format, child lock, audio settings).
Press button.
Context help
The DVD menu is displayed:
Whenever you have marked a function in the user interface, the context help will
give you an explanation of this function.
DVD menu
Play from
Markers
Show DVD menu with button.
Settings
Languages Presettings
Sound
Mark the ”Languages Presettings” function.
Press the button INFO.
You will see the name of the menu (”DVD menu”) at the top of the window. You
see a selection of functions in the main part of the window. The selection bar
shows you which function is selected (”Languages Presettings”). Functions which
are not currently available are shown in gray (”Play from”).
The arrow head on the right of the selection bar indicates that there is another
window for the ”Languages Presettings” function.
Context help is shown.
DVD menu
Languages Presettings
In this menu, you can modify
the default language settings
(film, subtitle and DVD menu
language). If these are already
preset on the DVD, they will be
set automatically when the
DVD is inserted.
Play from
Markers
Settings
Languages Presettings
Sound
Open this window with 4or the OK button:
DVD menu
Languages Presettings
Subtitle active
Subtitle
Film
Menu on DVD
DVD Player Menu
yes no
english
english
english
Info
off
End
The ”Subtitle active” function is marked. You can select between the options
”yes” and ”no”. ”yes” is selected in the graphic.
- 16
Download from Www.Somanuals.com. All Manuals Search And Download.
About operation
You can perform the following operating steps here as you can see in the bottom
part of the window:
You can move between the columns for titles and chapters with the arrows 3
and 4. You can choose within a column with the arrows5and 6. You can
start the selected chapter or the selected title with the OK button.
Change to the ”Settings” function with 5to show the context
help for ”Settings”.
To hide the Title/Chapter Table: Press button
.
Status display
Change to the ”Sound” function with 6to show the context
help for ”Sound”.
The status display gives you information about the current state of Auro.
Hide the context help with INFO .
Press button END .
Hide the context help and DVD menu with END .
Status display is shown, here for example for a DVD. The structure of the status
display differs according to the status of Auro.
Whilst playback is running:
Title
Title
Chapter
2/5
2/14
A title is the main film content or the content of the accompanying feature or the
music album. Each title has a title number enabling you to locate it easily.
1:24:54
1:45:21
Play time title
Total time title
Chapter
DVD
Play
Auto
Chapters are sections of a film or a piece of music that are smaller than a title. A
title consists of one or several chapters. Each chapter has a chapter number to
enable you to locate the desired chapter. Depending on the disc, chapters may
not be labeled.
5
The DVD status display contains the following data:
• current title, total number of titles
• current chapter, total number of chapters in the current title
• elapsed playing time of the current title (Play time title)
• total playing time of the current title (Total time title)
• type of medium loaded (”DVD”)
Title Table
In the Title table you get an overview of the division of the disc.
• current drive status (Auro is switched to ”Play”)
• audio channels of the sound source (5 loudspeakers, no subwoofer), sound
mode (”Auto”) and number of actually controlled loudspeakers (5 loudspeak-
ers)
Press the button OK .
Now the respective list of the inserted disk appears. You can
select a title and start it with OK.
Title/Chapter Table
If the Auro disk drive is in Stop mode (no playback after inserting a disc or after
ending playback):
Title 1
Title 2
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
other …
Total Titles
DVD
5
Stop
Auto
5
The DVD status display then contains the following data:
• total number of titles (Total Titles)
• type of medium loaded (”DVD”)
• current drive status (Auro is switched to ”Stop”)
• same audio data as during playback
The status display is hidden automatically after 8 seconds. To hide it earlier: Press
When calling the Title Table, the current chapter is always marked in the current
title (here: Chapter 6 in Title 1.
the button
.
17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
About operation
User interface of the inserted DVD
Automatic functions
Two userinterfaces are available for operating DVDs: the Auro interface and the
DVD interface itself. Both interfaces are totally independent of each other.
The DVD’s own interface is visible after inserting the DVD and running the intro
with which most DVDs are equipped.
Resume
When you interrupt playback of a DVD, Auro remembers where. When you
switch Auro back on and no other disc has been inserted in the meantime,
playback continues at the point where it was interrupted.
You can call the DVD’s own interface at any time during DVD playback.
Select Disc Menu with TEXT.
Screen saver
The screen saver switches on when playback of a DVD is interrupted for five
minutes. The background picture is dimmed.
Sleep timer
Change to standby mode
With the sleep timer you can set the Auro to switch off automatically after a set
time.
When the screen saver is active and no operation takes place for 15 minutes,
Auro automatically switches to standby mode.
Press the button Timer.
Five seconds to save
SLEEP 120appears in the Auro display. The sleep timer is switched on,
Auro will switch off automatically after ꢀ hours.
You can change the time for automatic switch-off by repeatedly pressing.
When you have switched Auro off, it cannot be switched back on again for five
seconds. Auro needs these five seconds to save the current settings after switch-
ing off.
SLEEP
The
To switch off the sleep timer:
Press the button Timer.
symbol lights up in the display while the sleep timer is active.
Press the button repeatedly until SLEEP OFFappears in the Auro display.
This switches the sleep timer back off.
Note: The sleep timer function is also available in tuner mode.
Numeric input
A one or several digit number has to be entered for some functions. The follow-
ing rules apply here:
one digit number
• either keep numeric button pressed for one second, then, this number is sent
to Auro or
• press the numeric key briefly; the number is transferred to Auro after two
seconds.
several digit number
• press the respective numeric buttons briefly.
- 18
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVDs (Digital Versatile Disc) are recognizable from this logo.
Select title
Press the green button.
Inserting a disc
or:
Press the button on the device.
Press the button INFO.
The disc drawer is opened, OPEN appears in the Auro display.
Place the disc in the drawer with the labeled side up.
Press the button on the device.
Menu bar is displayed.
Go to the element ”Select title”.
1/2
The drawer is closed.
The Auro display then changes to READING. The media
Select the desired title.
DVD
type is displayed (the
symbol lights additionally for a
DVD).
Press the button OK. Auro goes to the beginning of the
The intro start playing when you insert a DVD. Then, the DVD’s
own user interface is displayed (see pg. 18).
selected title.
Press button to hide menu bar.
Basic functions
or:
Menu and window
Press the button OK.
Always call the DVD menu, for example, when you want to change the basic set-
tings of your Auro (language, picture format, parental lock, audio settings).
Press button.
Title/Chapter Table is displayed:
Title/Chapter Table
DVD menu is displayed (see page 16).
Title 1
Title 2
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
other …
Menu bar
Call the menu bar, for example, if you want to use the DVD beyond its basic
functions. The DVD menu bar consists of eight elements. Each of these elements
stands for a function. Call the menu bar with the button
(see page 15).
during playback
Start playback
Press 3once.
Press button on remote control
This takes you from the ”Chapter” section to the ”Title” section.
Select the desired title.
or button on Auro.
Press the button OK. Auro goes to the beginning of the
selected title.
Message:
Play
Playback starts.
To close the Title/Chapter table: Press button
.
19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
or:
Select chapter
Chapter forward or back
Press the button OK.
Select chapter.
Title/Chapter Table is displayed:
Title/Chapter Table
Message:
Chapter 3 (of Title 2)
Title 1
Title 2
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
other …
If you have pressed 5or “P+“:
Playback starts at the beginning of the next chapter.
If you have pressed 6or “P-“:
Playback starts at the beginning of the current chapter. If you
press twice in quick succession, you go to the beginning of the
previous chapter.
or:
Select and view
with OK
Info
Back
End
Press button on the remote control
or button on Auro.
Now the respective table of the inserted disk appears. You can select a title here
and start it with OK. When calling the Title table the current chapter in the cur-
rent title is always marked (here: Chapter 6 of title 1).
Message:
Chapter 3 (of Title 2)
You can move between the columns for titles and chapters with the arrows 3
and 4. You can choose within a column with the arrows 5and 6. You can
start the selected chapter or selected title with the OK button.
Playback starts at the beginning of the next chapter.
Press button on the remote control
To close the Title/Chapter table: Press button
or:
.
or button on Auro.
Playback starts at the beginning of the current chapter. If you
press the button twice in quick succession, you go to the begin-
ning of the previous chapter.
Select disk menu with TEXT.
This takes you to the DVD’s own user interface (see page 18)
where you can select the desired chapter mostly.
or:
Enter the number of the desired chapter with the numeric but-
tons (for numeric inputs, see pg. 18).
See page 40 for audio functions.
Message:
Chapter 12 (of Title 2)
Playback starts at the beginning of the selected chapter.
- ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Call single frames:
Search
When you press the button again you will see the next single
frame in forward direction.
Note: The sound is off while the search is running.
Press the button long,
Note: You can hide the Pause menu if you wish (button
).
or:
or:
Press the button 4.
Go to the ”next” option with 4.
Playback runs forward at double speed, the following message
appears:
The next single frame is called after one second, the ”Pause”
option is selected again.
Search x2
End the ”Pause (Single Frame)” function:
Search in reverse direction:
Press the button long,
Press button on the remote control
or button on Auro.
or:
Press the button 3.
Playback continues at normal speed.
Slow motion: See page ꢀ5.
Playback runs in reverse at double speed, the following mes-
sage appears:
Interrupting playback
Search x2
Press the button.
Change the search speed:
The following speed steps are available in both forward and
The standard screen appears with the message:
reverse directions:
Stop
xꢀ, x4, x16, x100.
Change by repeatedly short pressing button
buton (or:
Playback is interrupted.
4) or button
(or: 3).
End search:
If you now press the
was interrupted.
button, playback continues at the point where it
Press the button.
Ending playback
Playback continues at normal speed.
Press button.
Pause (single frame)
Press button on the remote control
The standard screen appears with the message:
Stop
or button on Auro.
Press button again.
DVD picture freezes, the Pause menu appears in the fore-
ground, the ”Pause” option is selected:
The following message appears:
Stop
Single Frame
Slow Motion
Pause next
Playback is ended.
If you now press the
button, playback starts at the beginning of the disc.
ꢀ1 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Subtitles
Extended functions
Selecting sound format
Note: This function is only available, if the DVD is equipped accordingly.
With these functions, you can select another sound format on the DVD (if several
sound formats are available on the DVD).
Press the button.
Menu bar is displayed.
Press the button.
Go to element ”Select subtitles”:
off
Menu bar is displayed.
Go to the ”Select sound format” element with 56.
Select the desired language.
Select the desired sound format with 34.
Press the button OK . This changes the sound format.
Press button to hide menu bar.
Press the OK button. The subtitles are displayed in the selected
language of the film.
Press button to hide menu bar.
End ”Subtitle” function:
Sound format
Call menu bar and activate the ”Subtitle” element.
•
All three features of the sound format are displayed in the menu bar:
Select ”off” option:
off
Number and film language of the sound format
1 Deu
Press the button OK. This switches off the subtitles.
D
Multi-channel format
Available audio channels
Press button to hide menu bar.
In our example:
• Number of the sound format: 1
Camera position
• Film language of the sound format: German
• Multi-channel format: Dolby Digital®
• Available audio channels: 5.0 (no subwoofer)
To display the audio channels:
Note: This function is only available, if the DVD is equipped accordingly.
If a DVD is inserted which contains chapters with different camera positions, the
symbol lights up in the display. This symbol flashes when such a chapter
is playing. The ”Camera position” element of the menu bar then appears on the
screen:
Front L
Center
Front R
Subwoofer
1/3
Surround L
Surround R
If a channel is shown grey, it is not available in the selected sound format.
- ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
You can change the camera position while this element is displayed.
If you want to change the camera position:
Press the button.
Menu bar is displayed.
Go to element ”Repeat”:
Select alternative camera position.
Press the button OK.
off
Select the setting ”T” (for title) or ”C” (for chapter) with 34.
Playback continues from the selected camera position.
Change the camera position later:
Press the button red.
Press the button OK. The current title or current chapter is
repeated until you end the function.
Press button to hide menu bar.
Select alternative camera position by repeatedly pressing the red button.
Press the button red.
Repeat A-B
Use this function, if you want to repeat a passage with any starting point (A) and
any end point (B).
While DVD is playing:
Playback continues from the selected camera position.
End ”Camera position” function:
The function ends when the appropriate equipped section on
the DVD (chapter, chapter sequence) ends.
or:
Press the button to mark starting point A.
Menu bar is displayed, in the ”Repeat” element you will see:
Press the button.
A ?
Press the button to mark end point B.
Menüleiste wird eingeblendet.
Gehen Sie zum Element Kameraposition:
In the ”Repeat” element in the menu bar you will see:
3/3
A B
Alternative Kameraposition wählen:
The passage marked by A and B is repeated.
2/3
End ”Repeat title / chapter or Repeat A-B” function:
Select the ”off” setting in the ”Repeat” element:
Press the button OK.
off
Playback continues from the selected camera position.
Press the button OK. This ends the ”Repeat” function.
Press button to hide menu bar.
Press button to hide menu bar.
Repeat
You can repeat a chapter, a title or a freely definable passage (A-B).
Repeat a title or a chapter
Zoom (magnify image)
Select Zoom.
Press the yellow button.
Press the button.
Menu bar is displayed, ”Zoom” element is active:
or:
off
ꢀ3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Using markers
Select the desired zoom factor (”x4” or ”x16”).
Set markers to identify any positions on the DVD. You can then resume playing at
these markers.
You can set up to nine markers on every DVD. These markers only apply for the
Press the button OK.
current playback.
The central section of the whole image is magnified by the set
Press the blue button.
value. Menu bar is hidden, ”Zoom” display appears:
The following message appears on the screen:
Marker 1/9 set
This sets the first of nine possible markers.
To move the magnified image section over the whole image:
Set other markers:
Press the direction arrows.
Press the blue button a second time.
End ”Zoom” function:
Is Zoom still selected?
Press the yellow button.
The following message appears on the screen:
Marker 2/9 set
Menu bar is displayed, ”Zoom” element is active:
Go to the ”off” setting with 34.
This sets the second of nine possible markers.
Call marker(s):
Press the button OK. This ends the ”Zoom” function. You see
Press the button.
the whole image again.
Menu is displayed.
Press button to hide menu bar.
Go to the “Markers” entry and press 4.
Play from …
DVD menu
Markers
With this function you can specify a time on the DVD at which playback is to
resume.
Search
Single delete
Delete all
1 2 _ _ _ _ _ _ _
Press the button.
The DVD menu is displayed.
Go to the item ”Play from …”.
Go to number ”ꢀ”, for example.
Enter the desired time with the numeric buttons.
Press the button OK.
The DVD starts playing at marker ꢀ.
You can delete single markers or all markers at once with the
functions ”Single delete” and ”Delete all”.
Press the button OK. The menu is closed and playback resumes
at the desired time.
- ꢀ4
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
Slow motion
Basic settings
The basic settings of Auro can be changed in the DVD menu at any time. There is
no disc in the drive and the drawer is closed.
Note: The sound is off while slow motion is running.
Press the button.
Settings
DVD picture freezes, the Pause menu appears in the fore-
ground, the ”Pause” option is selected:
DVD menu
Settings
Single Frame
Slow Motion
Pause next
Picture Format
Child Lock
…
PanScan Wide Screen
Digital Sound Output
Speaker System
Go to the ”Slow Motion” function with 6.
The ”Slow Motion” item opens, the ”Pause” option is selected:
Single Frame
Slow Motion -1/2 -1/4 -1/8 -1/16 Pause 1/16 1/8 1/4 1
Info
Back
End
Select the desired speed step (minus values such as ”-1/16” or
”-1/8” for reverse slow motion).
Playback continues at the selected slow motion speed, for
example at half the normal playback speed when ”1/ꢀ” is
selected.
Picture Format
The Slow Motion menu is hidden after about 8 seconds. You
Note: ”Picture Format” may be shown in gray, i.e. unavailable. In this case,
can show it again at any time by pressing the
button.
interrupt the DVD playback first (button
) or remove the disk and close the
drawer.
End ”Slow Motion” function:
Select the desired picture format:
Press the button.
”Wide Screen” is defaulted for a wide screen TV (screen format
16:9).
Playback continues at normal speed.
If you have a TV with the 4:3 screen format, choose between
1) ”Letterbox” for a picture in ”wide format” with black bars at
top and bottom or
ꢀ) ”PanScan” for a picture of full height with cut-off sides.
This switches from Auro to the picture format you have
selected.
Note: This function is only available, if the DVD is equipped accordingly.
ꢀ5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
• film language
Setting Digital Sound Output
• language of the user interface of the inserted DVD
• language of the Auro user interface
Subtitle active
Note: This section only concerns you if you use the digital audio output of Auro.
You can select between the options ”yes” and ”no”.
If “yes” is selected the subtitles are shown in the set subtitle language if these
are available on the disc.
Change from the ”Settings” window to the ”Digital Sound
Output” window in the DVD menu:
Subtitle language
DVD menu
If a DVD is inserted, the subtitles are displayed in the selected language, if
this is available on the DVD and ”Subtitle active” is set to ”yes”. If the selected
language is not available on the DVD, the subtitles are played in the first subtitle
language on the DVD.
Digital Sound Output
Depending on the disc format you can select
which sound is provided by the digital sound
output.
Dolby Digital
MPEG
DTS
Dolby Digital D-PCM
Note: You can select a language for the subtitles for the respective loaded DVD
with the ”Subtitles” function (see pg. ꢀꢀ) – regardless of the basic setting made
here.
Info
Back
End
Dubbing language (Film)
If a DVD is loaded, the sound is played in the selected language, if it is available
on the DVD. If not, the sound is played in the first sound format language on the
DVD.
Select the appropriate settings:
• for ”Dolby Digital”: Dolby Digital – D-PCM
• for ”MPEG”: MPEG – D-PCM
• for ”DTS”: on - off
Note: You can select a dubbing language for the respective loaded DVD with
the ”Select sound format” function (see pg. ꢀꢀ) – regardless of the basic setting
made here.
Menu on DVD
Note: ”D-PCM” is a digital stereo signal created from the original signal.
Select the desired language of the user interface of the inserted DVD (see pg 18).
DVD-Player menu
Select the desired language of the Auro user interface; see also the detailed
description on page 11.
Languages Presettings
DVD menu
Special features of DVD Audio
Languages Presettings
Subtitle active
Subtitle
Film
Menu on DVD
DVD Player Menu
yes no
english
english
english
Discs in the DVD Audio format are recognizable by this symbol.
DVD Audio is a high-resolution multi-channel sound format
and is therefore superior in sound quality to the Audio CD and
MP3 formats.
Discs in DVD Audio format often contain stills. These stills are freely selectable
on some DVD Audio discs. Therefore, the DVD menu bar (see pg. 15; call with
Info
Back
End
button
) contains the ”Select picture” element in place of the ”Camera
position” element for DVD Audio:
3/24 .
If the numbers in this menu bar element are shown in gray, you cannot select the
stills.
In the ”Languages Presettings” sub-window of the DVD menu, you can define
basic settings for:
• subtitles
- ꢀ6
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio-CD
Select title
Status display
When you insert an audio CD and there is an L-link to the TV set, the TV picture is
Press the button OK.
switched off automatically. To show the status display, press the button
takes a few seconds for the TV picture to appear).
(it
Title Table
Title 1
Title 2
Note: If there is no L-link to the TV set you have to select the Euro-AV socket of
the Auro on the TV set to display the status display on the TV set.
Select titles with 56.
Here is an example of the status display for an audio CD:
You can start the selected title with OK.
Press the button to close the Title table.
CD
Total titles
7
Total play time
1:03:23
Play from …
Press the button.
Menu bar is displayed.
Select the element ”Play from …”.
Hide status display:
Press the button.
The display changes in the ”Play from …” element:
??:??
The status display is closed and the TV set switched off (only
with L-link).
Enter the desired time with the numeric buttons.
Menu bar
Press the button. The menu bar is displayed.
Press the button OK.
2/9
Select title
Playback starts at the desired time.
21:46
Play from ...
off
off
Random order
Repeat
Sound mode
Auto
Note: When the menu bar is displayed, the CD status information is hidden.
Then, you only see the background picture.
- ꢀ8
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio-CD
CD Random
Audio-CDs with CD-Text
Some Audio-CDs are equipped with CD-Text. Auro can process CD-Text. CD-Text
is recognizable by the name of the artist, the name of the CD, or the name of the
current title appearing in the Auro display depending on the situation.
When you switch this function on, the titles of your VCD/SVCD are played in
random order.
Press the button.
Text display
Menu bar is displayed.
Press yellow coloured key.
Go to the element ”CD Random”:
off
With the yellow coloured key you display the artist or the title alternately in the
message line of the Auro display. If the text is too long it is shown as a moving
text.
Select the ”on” option.
Press the button OK.
From now on, the titles on your disc are played in random
order.
RANDOM
lights up in the Auro display
Press button to hide menu bar.
End ”CD Random” function:
Go to the “Random order” menu bar item and select the option
“off”.
Press the button OK. From now on, the titles on your disc are
played in normal order.
Press button to hide menu bar.
Repeat
Accordingly DVD (page ꢀ3). Here the options “T” title, “all” and “off” can be
selected.
Repeat A-B
according to the DVD (pg. ꢀ3).
ꢀ9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio-CD
Title 7 is highlighted in blue in the ”List” item.
Title Programming
Title
List
1
3
2
7
3
6
4
5
5
6
7
With the ”Title Programming” function, you can play the titles on your disk in a
freely selectable order.
Press the button.
Go to title 4 with 3.
The ”Title Programming/Custom File” window is displayed.
Select the item ”Title”:
Press the button OK.
This inserts title 4 at third place in the list.
Title Programming / Custom File
Play Program
Title
List
1
3
2
7
3
4
4
6
5
5
6
7
Title
1
2
3
4
5
6
7
List
Delete List
If you want to delete a title from the list:
Add to Custom File
Go to the ”List” item with 6.
Function Custom File
Set with OK
Go to the title you want to delete with 34.
Press the button OK.
Info
Back
End
This deletes the title from the list.
If your program is to begin with title 3:
Go to title 3 with 4.
only for CD: the selected title is played.
If you want to play your program.
Go to the ”Play Program” item with 5.
Press the button OK.
Press the button OK.
Title ”3” appears in the ”List” line. Your programmed title
sequence begins with this title.
Add other titles to your list in the same way.
Auro begins playing your program.
End playback of your program:
If you want to insert a title at any point in your list:
You have compiled the following list:
Press the button twice.
Title
List
1
3
2
7
3
6
4
5
5
6
7
Your program is not played the next time playback starts.
You want to insert title 4 at the third place in the list.
Go to the ”List” item with 6.
If you want to delete the whole list:
Go to the ”List” item with 6.
Press the button OK.
Go to title 7 (before the insertion position) with 3.
Title
List
1
3
2
7
3
6
4
5
5
6
7
This deletes the list.
Go to the ”Title” item with 5.
- 30
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio-CD
To switch on/off the Custom File function:
Go to the item “Function Custom File” with 6
Save program (Custom File)
A program you have compiled with ”Title Programming” can be saved in a spe-
cial memory in the Auro, Custom File, and played again and again – even when
you have inserted other discs in the meantime. The CD then appears as if it only
contained the program saved in the Custom File.
Select the ”on” or ”off” option.
Delete from Custom File
Function Custom File
on off
This function is available for Audio-CDs and CDs with MPEG data. You can save a
program for a maximum of 10 discs in the Custom File. Then, you can save other
discs in the Custom File, but the respective first program in the Custom File is
deleted to make the necessary space in the memory.
Press the button.
To delete the inserted disk from the Custom File:
Select the item ”Delete from Custom File”.
Hereinafter, we assume that you have determined a program for the inserted disc
(see pg. 30) and want to save this program in the Custom File:
Select the ”Add to Custom File” item in the ”Title Programming/
Custom File” menu with 6.
Delete from Custom File
Function Custom File
on
Press the button OK.
”(00/10)” is added to the entry, i. e. 0 of 10 memory slots are
occupied at present.
This deletes the inserted disk from the Custom File. The line
changes.
Add to Custom File
(00/10)
Function Custom File
Press the button OK.
This saves the program of the inserted disc as the first of a
maximum of 10 programs in the Custom File. The display
changes to ”Delete from Custom File”. At the same time, the
”Function Custom File” item is activated, the ”on” option is
defaulted:
Delete from Custom File
Function Custom File
on
”Function Custom File – on” means: When you start a disk for
which a program is saved in the Custom File, this program is
played in place of the whole disc.
31 -
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 and JPEG
Status display
CD Text
When you insert an MP3 CD and there is an L-link to the TV set, the TV picture is
Both with MP3 and JPEG-CDs, the name of the disc and the name of the current
title are shown in the Auro display – similar to Audio-CDs with CD-Text. There is
no equivalent of the artist’s name on Audio-CDs for MP3 and JPEG-CDs.
Text display same as Audio CD (see page ꢀ9).
switched off automatically. To show the status display, press the button
takes a few seconds for the TV picture to appear).
(it
Note: If there is no L-link to the TV set you have to select the Euro-AV socket of
the Auro on the TV set to display the status display on the TV set.
Menu bar MP3
If MP3 data are being processed, the menu bar is the same as that for Audio-CD
(pg. ꢀ8).
Here is an example of the status display for an MP3-CD:
MP3
Note: The following special features apply for MPEG in comparison with Audio-
CDs:
Total titles
12
• ”Repeat A-B” is not available
• with ”Repeat all” only the current folder (see pg. 33) is repeated
• ”CD Random” only works on the last folder
" name of the disc"
Menu bar JPEG
If you have selected JPEG data, you get the JPEG menu bar:
Press the button.
2/9
off
off
Select title
Zoom
The status display is closed and the TV set switched off (only
with L-link).
Repeat
Select title
according to Audio CD (pg. ꢀ8).
MP3 and JPEG mixed
Operation of MP3 and JPEG data is very similar. In mixed CDs, Auro only initially
provides the MP3 data. You have to switch over the data format to be able to use
the JPEG data. The Folder/Title Table must be displayed in order to do this (but-
Zoom
according to the DVD (pg. ꢀ3/ꢀ4).
ton OK). Press the
, button with the Folder/Title Table displayed to switch
back and forth between MP3 and JPEG data.
Repeat
according to Audio-CD, ”Repeat title/all” (pg. ꢀ9); for JPEG only the options ”all”
and ”off” are available.
With “Repeat all” you can select a kind of slide show in which all pictures are
shown for eight seconds each.
- 3ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 and JPEG
Folder/Title Table
Kodak Picture CD
You can show the Folder/Title Table with the OK button. Operation of MP3 and
JPEG data is identical.
Photos are stored in JPEG format on a Kodak Picture CD. Auro can display these
photos on the TV set as described above.
Rotate JPEG pictures
Folder/Title Table
If you want to rotate a JPEG picture (on JPEG-CD or Kodak
Picture CD):
Press 34.
Lee Perry:
Dub Syndicate
Revolution Dub
Dub Syndicate:
Time Boom
1 S.D.I.
2 Blinkers
3 Jungle
With 3the picture is rotated clockwise, with 4anticlockwise.
4 De Devil Dead
5 Music
6 Science Lovers
Folder Level
0
1
2
3
4
5
6
7
8
…
Select and listen
with OK
Info
Back
End
• In the graphic, we assume that the inserted medium only contains MP3 data;
the data are stored in several folder levels.
• The name of the medium (”Lee Perry”) and the name of the selected folder
(”Dub Syndicate”) are underlined.
• The titles of all folders are automatically numbered with one number range for
all folderlevels.
• Folders are entered in the list without leading numbers (left: ”Dub Syndicate”
and ”Revolution Dub”; right ”Time Boom”).
• When a folder is marked, you can move to lower folder levels with the ”right”
arrow and to higher folder levels with the ”left” arrow.
• In the ”Folder Level” line, the two folder levels are marked which are currently
displayed in the columns left (”0”) and right (”1”).
Title Programming/Custom File
(only MP3)
according to Audio-CD (see pg. 30).
33 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Child Lock
With the child lock you can prevent your children from playing unsuitable DVDs.
A child lock is not available for other kinds of media (Audio-CD, MPEG, JPEG).
With appropriately equipped DVDs, it is even possible to have certain chapters
(scenes) replaced by alternative scenes which are suitable for children. Auro
detects the chapter requiring protection (the appropriate scene). Depending on
how you have set the child lock, the original scene is played or an alternative
scene not requiring censorship.
Enter your PIN with the numeric buttons.
When you have entered the fourth digit, the text ”Please
remember your PIN before continuing with OK!”.
Take this advice.
Press the button OK.
The censorship evaluation differs from country to country. This evaluation is
therefore linked to the setting under ”Location of Set” (country).
This sets your PIN.
Activating the child lock for the first time
Prompting the location of the set
Determine your personal identification number (PIN)
To activate the child lock, you have to enter a four-digit PIN first.
Press the button.
The prompt ”Location of Set” now appears, if you are activating
the child lock for the first time.
DVD menu
The DVD menu is displayed.
Go to the ”Settings” item in the DVD menu.
Location of Set
D
Germany
Press the button 4.
GB Great Britain
E
F
Spain
France
The ”Settings” window opens.
Go to the ”Child Lock” item.
NL Netherlands
… other
Press the button 4.
Info
Back
End
The ”Child Lock” window is displayed with the prompt to enter
a four-digit PIN.
Go to the country in which the set is being used with 6.
DVD menu
Child Lock
Press the button OK.
Please define your Personal
Identification Number:
The value entered under ”Lock level” is evaluated according to
the rules applicable in the selected country.
You can change this setting at any time.
Child Lock
? ? ? ?
Note: If you have forgotten your PIN: Auro always accepts the digit sequence
”3001” as a PIN.
With the ”Change PIN” function, you can set a different personal code number
at any time.
- 34
Download from Www.Somanuals.com. All Manuals Search And Download.
Child Lock
Different options:
Using the child lock
• ”off” option: Child lock is switched off. No PIN code is prompted (unless the
DVD is locked; see below).
The ”Child Lock” window has the following structure on DVDs:
• Option ”1” to ”8”: The least scenes (chapters) are locked in option ”1”. In op-
tion ”8”, more harmless scenes are also locked or replaced by alternatives.
• ”general” option: The secret code is prompted before playing for all DVDs.
DVD menu
Child Lock
Lock level
Changing the PIN
Change PIN
Delete PIN
Location of Set
Lock disc
1. Go to the item ”Change PIN”.
ꢀ. Enter a new PIN of your choice with the numeric buttons.
3. This changes the PIN.
4. Please remember your new PIN!
Back
End
Deleting the PIN
Deletion of the PIN deactivates the child lock.
1. Go to the item ”Delete PIN”.
Lock level
ꢀ. Press the button OK.
3. This deletes your PIN and deactivates the child lock.
Go to the ”Lock level” item in the ”Child Lock” window.
The selection bar opens, the ”off” option is activated:
Location of Set
Lock level
general 1 2 3 4 5 6 7 8 off
You can change the ”Device location” setting you made the first time you acti-
vated the child lock with this function (see pg. 34).
Go to the option of your choice with 4or enter the security
level with the numeric buttons, see ”Different options” below.
Lock disc/unlock disc
Press the button OK.
If you want to have the PIN prompted before playing certain DVDs:
1. Go to the item ”Lock disc”.
This sets the child lock to the lock level you have selected.
The entry gets the suffix ”(0/20)”:
Lock disc
(0/20)
No DVD is locked yet (”0”); you can lock a maximum ꢀ0 DVDs.
ꢀ. Press the button OK.
This locks the loaded DVD
The text changes: Unlock disc
3. If you now press the OK button, the disc is unlocked again; the text changes
back to ”Lock disc (0/ꢀ0)”.
35 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
Initial installation FM
Station table
The sub-device DVD/CD is active when you switch on Auro for the first time. You
have to change to the radio first:
Note: This function is only available, if Auro and the TV set are connected by an
L-Link.
Press the button long.
In both wavelengths, you get the station table after pressing the OK button,
here, an example for the FM wavelength:
The ”Tuner” is active on the Auro, the FM wavelength is
switched on.
In the Auro display, 1ST INSTand WAIT. Auro searches
the FM range for stations with adequate reception quality
and enters these stations in a list. This process may last a few
minutes. At the end of this process, the first station in this list is
played. The number and name of this station are shown in the
display. Auro can be operated normally from now on.
If the played station has an RDS name, the RDS name will be
displayed.
Radio:
8
DLF
Numerical
9
HR-INFO
S
S
S
S
S
S
S
S
S
AUDIO IN
AVS
10 MDR INFO
11 MDR FIGA
12 NDR KULT
13 SWR1
AV2
AV1
1
2
3
4
5
6
7
8
B5 AKTL
BAYERN 1
BR4 KLSK
S
S
S
S
S
S
S
S
14 SWR2
15 WDR3
16 WDR5
SUNSHINE
ROCK ANT
ANTENNE
DLR
17 OESTER 1
18 MDR JUMP
19 JAZZ RAD
20 BLUSAT20
S
S
S
OK
RDS
DLF
. lights up additionally in the display.
18:00 - 18:10 Nachrichten
OK
END
Switch to ...
Scan stations
First installation AM
0
9
Select station
Screen off/on
Previous station
Change sorting
...
MENU
EPG
Change to the AM wavelength:
Press the button or
The FM-Radio station table holds a maximum of 36 stations. In our example,
ꢀ9 stations have been found in the initial installation and entered in the station
table.
Stations with RDS names are placed at the beginning of the list followed by the
stations which do not transmit an RDS name. These transmitters are listed with
their reception frequency.
press the button on the unit until “TUNER” appears in the
display.
Source
The tuner changes to the AM wavelength. Here, too, first instal-
lation is carried out as for the FM.
The station table for AM holds a maximum of ꢀ4 stations.
You can hide the station table with the button
.
Selecting station/program place
Automatic station search
Regardless of whether or not the station table is displayed, you can select sta-
tions in the following way:
You can create a new list of stations and have it entered in the station table at
any time separately for every wavelength. All the previously saved stations are
then deleted of course.
Store
Press the button on the device for at least 5 seconds.
Press P+ for station forward or P- for station backwards.
You will see the frequency in the Auro display. If a station is
found it will dwell longer on this frequency. A new station table
is created. At the end of this process, the first station of the
newly created station table is played. Auro can be operated
normally from now on.
or:
Enter the number of the desired station with the numeric keys.
Back to the previously played station:
Press the yellow button.
- 36
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
Individual resorting
Manual station search
You can change the layout of the stations/program places at any time. You can
place your favorite station at program place 1, for example. Please note that the
station that was previously at program place 1 will be lost.
Press one of these buttons long.
The tuner searches for the next station with adequate reception
quality, with forwards, with in reverse. As soon
as such a station is found, the search ends and the found sta-
Select the station which is also to be stored at the new pro-
gram place (program place is copied).
TUNED
tion is played.
lights in the display.
Fine tuning
or
Note: This function is only available for the FM range.
If the reception quality of the current station is unsatisfactory, you can adapt the
frequency in small steps.
Store
Press the button on the device.
Press one of these buttons short.
MEMORY
lights up in the Auro display.
Select the number of the desired programme place with P+/- on
The frequency set on the tuner is changed in small steps (0.05
MEMORY
the remote control
lights up and the number for the
MHz), with
forwards, with
in reverse.
new programme place flashes.
TUNED
Observe
in the display. When it is alight, the reception
power is adequate. When it is hidden, the reception is too
weak for satisfactory playback.
Store
Press the button on the device.
Mono/Stereo switching
This places this station at the newly selected program place,
MEMORY
is hidden.
In the case of poor reception in the FM waveband, you can improve the listening
quality by switching over to mono:
Switching tuner display
Press the button.
Press the button repeatedly. Either the RDS name or the station
frequency appears in the message line in the Auro display (see
page 5).
STEREO
The received station is played in mono,
Auro display.
is hidden in the
Switch stereo back on:
Press the button.
STEREO
Playback is in stereo,
lights in the display.
37 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
Audio functions
Programming the station manually
The audio functions act centrally on the whole audio system regardless of
whether ”DVD/CD” or ”Tuner” is switched on as a sub-device or whether TV
sound is played or the sound of another device connected to Auro.
Set the desired frequency with the functions ”Manual station
search” and ”Fine tuning” if necessary.
Press the button on the device short.
Store
Volume
The Auro display offers the possibility of storing this frequency
at the next free program place (e.g. number 30 flashes); if all
program places are occupied, the first program place is offered
The volume is controlled by V–/V+ on the remote control.
MEMORY
(digit 1 flashes). Additionally,
lights.
With the ”Sound off/on” button, you can mute the speakers or
switch them back on by pressing this button.
If you want to accept the suggested program place:
Press the button on the device.
Store
Treble and bass
The frequency you specify is then assigned to the suggested
program place.
Treble and bass can be set in two ways: in the Sound menu in the Auro display or
in the DVD menu.
If you want to assign a different program place to the one suggested:
Select the number of the desired programme place with P+/- on
by the Sound menu in the device display
MEMORY
the remote control
lights up and the number for the
new programme place flashes.
Press the button (repeatedly).
(SOUND)appears in the Auro display. This opens the
display-based Sound menu.
Store
Press the button on the device.
Press 5 once.
This assigns the frequency you have set to the program place
MEMORY
you have selected,
is hidden.
(BASS 0)appears in the display. (“0“ is only an example.
The value set at Auro is displayed.)
With 34, you can change the settings for the low frequen-
cies in a value range of –1ꢀ to +1ꢀ.
To change the settings for high frequencies:
Press 5 again.
(TREB 0)appears in the display. (Here, too, “0“ is only an
example).
With 34”, you can change the settings for the low frequen-
cies in a value range of –1ꢀ to +1ꢀ.
See also page 39 “Night mode”.
- 38
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio functions
with the DVD menu:
Night mode
When you switch on the ”Night mode” function, loud passages of a Digital Dolby
sound source are reduced in volume when played to avoid disturbing neighbors
or children.
Here, too, there are two possibilities – exactly the same as for treble and bass
settings: in the Sound menu in the Auro display or in the DVD menu.
Press the button.
The DVD menu is displayed.
Go to the item ”Sound”.
Open the ”Sound” window.
Press the button.
Menu DVD
Sound
The DVD menu is displayed.
Go to the item ”Sound”.
Treble
0
Bass
Night mode
Open the ”Sound” window.
Go to the item ”Night mode”.
Menu DVD
Sound
Info
Back
End
Treble
Bass
Go to the item ”Treble” or ”Bass”.
Night mode
on off
Change the current setting as you wish; you can follow the
procedure on the bar and the number in front of it.
Info
Back
End
Select the ”on” or ”off” option.
This switches the night mode either on or off.
39 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio functions
Symbols in the Auro display
Sound mode
The currently valid features of the sound mode are represented by symbols in the
Auro display. See the following table for the meanings of these symbols:
Unlike the other audio functions volume or treble and bass settings, the sound
mode is a source-dependent audio function. Depending on which sound source
is available with what audio features (Audio-CD, Tuner, DVD, TV, …), you can
choose between different formats for the sound output.
Symbol
Sound mode
The standard setting of the sound mode is ”Automatic”. In this sound mode,
Auro plays the sound source in original format. In the case of a digital multi-
channel signal, the playback with the best quality is selected. However, you can
select a different sound mode at any time.
Stereo analog (sound source)
dts; multi-channel digital
STEREO
dts
Select the ”Surround” sound mode when you want to hear an audio CD or a
radio station over all speakers.
D
Dolby Digital; multi-channel format digital (sound source)
In Dolby Prologic II the modes PL II Movieand PL II Musicare
distinguished. In “Movie“ the center channel for Dolby is more strongly accentu-
ated to highlight voice reproduction. In “Music” the setting is optimized to music
reproduction.
Dolby ProLogic II; multi-channel analog (audio output “Movie“
and “Music“ respectively)
PL II
The above displays appear in clear text in the message line (see page 5) ad-
ditionally for two seconds.
by the Sound menu in the device display
Setting the remote control
The different Loewe sets can be set as follows on the Assist remote control:
If your remote control is set to one of the modes DVD/CD, REC, or FM-RADIO:
Press the button (repeatedly).
Device
Button combination
(SOUND )appears in the Auro display.
You can choose from the available sound modes by pressing
34.
Loewe TV (Chassis L2650 ≥ V4.4)
Loewe TV (Chassis Lꢀ600)
Loewe TV (Chassis Qꢀ5x0)
Loewe Centros 11xꢀ
+
+
+
+
+
+
+
+
+
with the menu bar (not for tuner mode):
Loewe Centros 1ꢀxꢀ/ꢀ1xꢀ
Loewe ViewVision DR+
Loewe ViewVision 8106 H
Loewe Auro ꢀꢀ16 PS/8116 DT
Loewe Xemix 6ꢀꢀꢀ PS
Factory setting
Press the button.
Menu bar is displayed.
Go to the element ”Sound mode”.
Auto
Go to the sound mode of your choice, to Surround, in our
example:
The specified key combination must be pressed (approx. 5 s) until one of the LEDs
flashes twice.
Surr.
Press the button OK. The selected sound mode is entered.
Press button to hide menu bar.
- 40
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control Assist – TV-operation
Switch on/off - on stand by
Sound off/on
LED indicator for current operating mode
short: TV Radio Digital; long: Auro FM/AM-Radio
Switch over to operate Auro
Sound menu on/off
Switch over to operate TV set
Switch over to operate Recorder
Call timer list
Set picture format
Select station directly
MENU: enter numbers or letters
Call AV selection
PIP on/off (picture in picture)
Electronic Programme Guide (EPG) on/off
Menu “Other functions“ on/off
Open index; MENU: info texts on/off
Status display on/off; MENU: hide menu
Teletext on/off
Show/hide menu
P+/P– Select station up/down
V–/V+ Volume down/up
PIP: Position of the PIP picture; MENU: select/set
Station list on; MENU: confirm/call
Yellow button: previous station
Blue button: programme info on/off
Green button: Standard settings for picture/sound
Red button: Freeze picture on/off;
DR+: Call the DR+ archive
Select station down; DR+: Jump back/Rewind/Replay
Freeze picture off; DR+: Playback/Set bookmark
Select station up; DR+: Jump forward/Fast forward
DR+: Record
Freeze picture on; DR+: Stop
Freeze picture on/off;
DR+: Pause (Start viewing with time shift)
41 -
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do, if ...
.
Problem
Remedy
No standby display.
No TV picture.
Has the device been connected to the mains properly?
Has the TV been connected properly (see pg. 8)?
The message ”Wrong country code” appears after
loading a DVD.
Europe is within the DVD regional code ꢀ. DVDs which you buy in Europe are designed for this country
code. You cannot play DVDs with other country codes.
Distorted picture.
Check the disc for finger marks; wipe clean with a soft cloth from the center to the edges if necessary.
Completely distorted display of the user interface or:
no color in the TV picture with the user interface
displayed or:
Auro is set to the wrong TV norm (NTSC or PAL); see pg. 1ꢀ.
distorted picture or black and white picture with DVD.
Disc cannot be played.
Is the DVD loaded with the labeled side up? Has the loaded disc got a playback format which Auro can-
not handle (see ”Technical Data” on pg. 43)?.
No sound.
1. Do you have to set up an additional audio connection (pg. 9)?
ꢀ. In Component Video mode: the software of the Loewe LCD TV must be > Vꢀ.x.
Auro does not react to remote control.
1. Is Digital Link switched on on Auro? See ”Activate Digital Link?” on pg. 1ꢀ.
ꢀ. Point the remote control directly at the front of Auro.
3. Make sure the front of Auro is not obstructed.
4. Are the batteries in the remote control OK?
5. DVD/CD allows no further operations. Read the leaflet which comes with the DVD/CD.
The TV does not recognize Auro.
1. Is the L-Link connection to the TV established (see pg. 9)?
ꢀ. Your TV set must be equipped with software 6.x (Q/S/P ꢀ5xx) or higher. Have a look in the ”Main
Information /Equipment” menu of your TV. Do you have an older version of the TV software? Contact
your Loewe dealer for a TV software update if necessary.
DVD picture is green and is displayed twice on the
screen.
Check Progressive Scan setting (see page 1ꢀ).
Picture too dark, one of the colours missing or too weak Check Progressive Scan wiring (see page 9).
and discoloration visible on the screen.
TV shows no DVB station (L-Link connection present).
Disconnect the TV and Auro from the mains and switch back on.
With use of the component signal and at the same time
“TV as centre loudspeaker“ (see page 9): No sound on
replay of an analog device (e.g. video recorder, analog
set-top box) connected to the AV sockets (AV1/ꢀ, AVS)
of the Loewe Flat TV or digital device without use of the
digital sound through “audio digital assignment” (e.g.
DVD player/recorder).
Connect the “AUDIO OUT L/R” sockets of the Loewe TV device to the SCART socket “TO TV” of Auro us-
ing an adapter cable stereo cinch -> SCART (available in specialised trade).
- 4ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Data
General
Tuner
Auro ꢀꢀ16 PS
Mains
power consumption
article number 65ꢀ01A/D00
AC 110-240V, 50/60 Hz, Protection class 1
Operating: 15 W
Type
PLL, RDS
AM-Band
FM-Band
Preset memory
522 - 1611 kHz, width 9kHz
87,5 - 108,0 MHz
36 FM, ꢀ4 AM
Standby: ꢀ W
Dimensions
Weight
430 X 75 X 3ꢀ5 mm
3,6 kg
Connections
Operating temperature
Humidity
5 °C - 35 °C
5 % - 90 % (no condensation)
FM
AM
FM-antenna-Input, 75 Ohm
AM-antenna-Input
TO TV
1.0 Vp-p, 75Ohm, RGB/FBAS, SCART
(Y) 1,0 V (p-p), 75 Ohm, negative Sync.,
RCA socket x 1 (Pb)/(Pr) 0,7 V (p-p),
75 Ohm, RCA socket x ꢀ
0 dBm über 47 kOhm, RCA socket
(L, R) x ꢀ
Playback
COMPONENT VIDEO OUT
Playback formats
DVD-Video, DVD-Audio
DVD-R, DVD-RW (Video Mode),
DVD+R, DVD+RW,
JPEG, Kodak Picture CD (JPEG),
CD, CD-R, CD-RW, HDCD
MP 3 (1ꢀ8kBit), WMA
AUX 1 IN (Analog Audio)
AUX ꢀ DIGITAL IN
AUX1 OUT (Analog Audio)
RCA socket
2,0 Vrms (1 kHz, 0 dB), 600 Ohm,
RCA socket (L, R) x 1 / SCART
0,5 V (p-p), 75 Ohm, RCA socket x 1
PREOUT (controllable 5.1 output
max.3 Vrms)
PCM, MEPG, AC3, dts
RCA socket 6x: L, C, R, SL, LFE, SR
9-pol JST
Video
AUX ꢀ DIDGITAL OUT
Standard
TV Standard PAL / NTSC
Picture format 16:9, Letterbox 4:3,
Pan & Scan 4:3
Digital image processing 1ꢀ bit
Progressive scan
DVD (PCM 48 kHz): 8 Hz - 22 kHz,
CD: 8 Hz - 20 kHz
DVD (PCM 96 kHz): 8 Hz - 44 kHz
PREOUT
Cubic socket
L-Link TV
L-Link EXT
Front headphones
8-pol Mini-DIN
8-pol Mini-DIN
jack 3,5 mm
Frequency response
Audio
• Design and technical specifi cations are subject to change without notice.
• Manufactured under license from Dolby Laboratories. Dolby, ProLogic and the
• double-D symbol are trademarks of Dolby Laboratories.
Audio-standards
Dolby Digital (AC-3), Dolby Prologic II, DTS,
MPEG, PCM
Digital audio signal processing ꢀ4 bit
> 100 dB (AUDIO OUT connection)
< 0,008% (AUDIO OUT connection)
> 95 dB (AUDIO OUT connection)
• “DTS“ and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Signal-to-noise ratio
Harmonic distortion
Dynamic range
CH/08/06/6
© by Loewe Opta ꢀ008
43 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Service
Loewe Austria GmbH
Parkring 1ꢀ
1010 Wien, Österreich
Tel +43 - 1 ꢀꢀ 88 633 - 0
Fax +43 - 1 ꢀꢀ 88 633 - 90
Email [email protected]
Loewe Opta GmbH,
ISSAGOGIKI EMBORIKI ELLADOS
S.A.
A Cappella
Avitech Co. SRL
Customer Care Center
Industriestraße 11
Ausros Vartu 5, Pasazo skg.
011ꢀ9 Vilnius, Lithuania
Tel +370 - 5ꢀ 1ꢀ ꢀꢀ 96
Fax +370 - 5ꢀ 6ꢀ 66 81
Email: [email protected]
1/II Pipera Tunari St.
3ꢀ1 Mesogion Av.
007190 Voluntari, Ilfov, Romania
Tel +40 - ꢀ1 ꢀ00 64 64
Fax +40 - ꢀ1 ꢀ00 64 65
Email [email protected]
96317 Kronach, Deutschland
Tel +49 1801–ꢀꢀꢀ56393
Fax +49 9ꢀ61–99500
Email [email protected]
15ꢀ 31 Chalandri-Athens, Hellas
Tel +30 - ꢀ10 67ꢀ 1ꢀ 00
Fax +30 - ꢀ10 674 0ꢀ 04
Email [email protected]
International Dynamics
Australasia Pty Ltd.
1ꢀ9 Palmer Street
DONEO CO. LTD
Service Center Loewe
Kjaerulff 1 A/S
Basys Magyarorszagi KFT
Tó park u.9.
ꢀ045 Törökbálint, Magyar
Tel +36 - ꢀ341 56 37 (1ꢀ1)
Fax +36 - ꢀ3 41 51 8ꢀ
Email [email protected]
34/36 Danny Cremona Street
Hamrun, HMR0ꢀ, Malta
Tel +356 - ꢀ1 - ꢀꢀ 53 81
Fax +356 - ꢀ1 - ꢀ3 07 35
Email [email protected]
ul. Verkhnaya Maslovka, d. ꢀ9
1ꢀ5083 Moscow, Россия
Tel +7 - 495 61ꢀ 50 43
Fax +7 - 495 61ꢀ 47 10
Email [email protected]
C.F. Tietgens Boulevard 19
5ꢀꢀ0 Odense SØ, Denmark
Tel +45 - 66 13 54 80
Fax +45 - 66 13 54 10
Email [email protected]
Richmond 31ꢀ1, Victoria,
Australia
Tel +61 - 3 - 94 ꢀ9 08 ꢀꢀ
Fax +61 - 3 - 94 ꢀ9 08 33
Email mail@international
dynamics.com.au
SOMARA S.A.
Kjaerulff 1 AB
Gaplasa S.A.
Plug&Play
Bednjanska 8, 10000 Zagreb
Hrvatska (Kroatia)
Tel +385 1 49ꢀ9 683
Fax +385 1 49ꢀ9 68ꢀ
Email [email protected]
377, Rue Mustapha El Maani
ꢀ0000 Casablanca, Morocco
Tel +ꢀ1ꢀ - ꢀꢀ ꢀꢀ 03 08
Fax +ꢀ1ꢀ - ꢀꢀ ꢀ6 00 06
Email [email protected]
Ridbanegatan 4, Box 9076
ꢀ00 39 Malmø, Sverige
Tel +46 - 4 06 79 74 00
Fax +46 - 4 06 79 74 01
Email [email protected]
Conde de Torroja, ꢀ5
ꢀ80ꢀꢀ Madrid, España
Tel +34 - 917 48 ꢀ9 60
Fax +34 - 913 ꢀ9 16 75
Email [email protected]
Loewe Opta Benelux NV/SA
Uilenbaan 84
ꢀ160 Antwerpen, België
Tel +3ꢀ - 3 - ꢀ 70 99 30
Fax +3ꢀ - 3 - ꢀ 71 01 08
Email [email protected]
CableCom AS
Ostre Kullerod 5
3ꢀ41 Sandefjord, Norge
Tel +47 - 33 48 33 48
Fax +47 - 33 44 60 44
Email [email protected]
BaSys Czech & Slovak s.r.o.
Stará Vajnorská 17/A
831 04 Bratislava, Slovakia
Tel + 4ꢀ1 ꢀ 49 10 66 18
Fax + 4ꢀ1 ꢀ 49 10 66 33
Email: [email protected]
Loewe Italiana SRL
TEDRA TRADING OY
Kuusemetsa 3
Saue 76506, Estonia
Tel +37ꢀ - 50 14 817
Fax +37ꢀ - 67 09 611
Email raivo@futurehifi.com
Largo del Perlar, 1ꢀ
37135 Verona (VR), Italia
Tel +39 - 045 8ꢀ 51 611
Fax +39 - 045 8ꢀ 51 6ꢀꢀ
Email Stefano.Borgognoni@
loewe.it
Darlington Service
Kn. Klementina Street, bl. 193
1618 Sofia, Bulgaria
Tel +359 - ꢀ 955 63 99
Fax +359 - ꢀ 955 63 99
Email [email protected]
International Dynamics (NZ) Pty
Ltd
ENKAY ELEKTRONIK SAN. Ve Tic.
Ltd. Sti.
Loewe Opta France S.A.
13 rue du Dépôt,
Parc del l‘Europe, BP 10010
67014 Strasbourg Cédex, France
Tel +33 - 3- 88 79 7ꢀ 50
Fax +33 - 3- 88 79 7ꢀ 59
Email [email protected]
PL Trading (pz 2004) Ltd.
ꢀ7, Aliat Hanoar St.
Givataiim 53401, Israel
Tel +97ꢀ - 3 - 57 ꢀ7 155
Fax +97ꢀ - 3 - 57 ꢀ7 150
Email [email protected]
PO Box 109 317, Newmarket
Auckland, New Zealand
Tel +64 9 379 0179
Fax +64 9 379 0ꢀ79
Email: enquiries@international
dynamics.co.nz
Alemdag Cad: Site Yolu No.: 10
81ꢀ30 Ümraniye/ Istanbul, Türkiye
Tel +90 - ꢀ16 634 44 44
Telion AG
Rütistrasse ꢀ6
8952 Schlieren, Schweiz
Tel +41 - 44 73ꢀ 15 11
Fax +41 - 44 73ꢀ 15 0ꢀ
Email [email protected]
Fax +90 - ꢀ16 634 39 88
Email [email protected]
Dubai Audio Center
Origo Ltd
Kjaerulff 1 OY
Mayro Magnetics Portugal, Lda.
Rua Professor Henrique de Barros
Edifício Sagres, ꢀº. C
P.O. Box 3ꢀ836, Sheik Zayed Road
Dubai, UAE
HADJIKYRIAKOS & SONS LTD.
1ꢀ1 Prodromos Str., P.O Box
ꢀ1587
Unit ꢀ3 Magna Drive
Magna Business Park, City West
Dublin ꢀ4, Republic of Ireland
Tel +353-1-4666700
Fax +353-1-4666706
Email [email protected]
Uudenmaantie 100
ꢀ0760 Piispanristi, Finland
Tel +358 - ꢀ0 751 3800
Fax +358 - ꢀ0 751 3801
Email [email protected]
Tel +971 - 4 343 14 41
Fax +971 - 4 343 77 48
Email [email protected]
ꢀ685-338 Prior Velho, Portugal
Tel +351 - ꢀ1 94ꢀ 78 30
1511 Nicosia, Cyprus
Tel +357 - ꢀꢀ 87 ꢀ1 11
Fax +357 - ꢀꢀ 66 33 91
Email savvas@hadjikyriakos.
com.cy
Fax +351 - ꢀ1 94ꢀ 78 30
Email [email protected]
THE SOUNDLAB (PTY) LTD
P.O. Box 3195ꢀ, Kyalami 1684
Republic of South Africa
Tel +ꢀ7 - 1 14 66 47 00
Fax +ꢀ7 - 1 14 66 4ꢀ 85
Email [email protected]
Loewe UK Limited
SAS
Century Court, Riverside Way
Riverside Business Park, Irvine,
Ayrshire
DSV TRADING SA
Hamad Al Haqueel Street,
Rawdah, Jeddah
Plac Kaszubski 8
K+B PROGRES A.S.
U Expertu 91
ꢀ5069 Klicany u Prahy, Česko
Tel +4ꢀ0 ꢀ 7ꢀ 1ꢀ ꢀ1 11 (ꢀꢀꢀ)
Fax +4ꢀ0 ꢀ 7ꢀ 1ꢀ ꢀꢀ 39
Email [email protected]
81-350 Gdynia, Polska
Tel +48 - 58 - 6 61 ꢀ8 00
Fax +48 - 58 - 6 61 44 70
Email [email protected]
Kingdom of Saudi Arabia
Tel +966 (ꢀ) 665 4616 ext: 666
Fax +966 (ꢀ) 660 7864
Email [email protected]
KA11 5DD, UK
Tel +44 - 1ꢀ94 315 000
Fax +44 - 1ꢀ94 315 001
Email [email protected]
© by Loewe Opta ꢀ90508
44
Download from Www.Somanuals.com. All Manuals Search And Download.
|