DCS 6000
User Manual
Digital Conference System
AO 6004 Audio Output Unit
Danish Interpretation Systems
DIS
Download from Www.Somanuals.com. All Manuals Search And Download.
Danish Interpretation Systems
User Manual
List of Contents
General description..........................................7
Features............................................................7
User controls, indications & connections ........8
System settings ................................................8
Normal operation .............................................9
List of Contents..................................................... 3
Important .............................................................. 4
Compliancy........................................................ 4
Installation precautions.................................... 4
Cleaning ............................................................. 4
Repacking .......................................................... 4
Warranty ........................................................... 4
System Setup........................................................10
General guidelines ...........................................10
Typical schematics...........................................11
Description of the DCS 6000 system ................... 5
Features.............................................................. 5
Using AO 6004 with IT 6108 IR-Transmitter
...........................................................................11
System components........................................... 6
Using AO 6004 with DT 60xx Digital IR-
Transmitter ......................................................11
Central equipment etc...................................... 6
Interpreter equipment...................................... 6
Voting equipment............................................ 6
Conference equipment and channel selectors . 6
Appendix..............................................................12
Technical appendix..........................................12
Cabling...........................................................12
Operating instructions ......................................... 7
AO 6004 Audio Output Unit............................ 7
Accessories (not supplied).............................12
Technical specifications.................................13
Copyright © 2007 DIS
AO6004 REV A.DOC
11-01-2007
No part of this publication may be reproduced or utilised in any form or by any means without permission in writing from the
publisher
Download from Www.Somanuals.com. All Manuals Search And Download.
Danish Interpretation Systems
User Manual
Important
exposed to direct sunlight, excessive dust or
humidity, mechanical vibration or shock.
Compliancy
To avoid moisture condensations do not install the
unit where the temperature may rise rapidly.
The equipment has been tested and found to comply
with the limits of the following standards for digital
devices:
Cleaning
•
•
•
EN55103-1 (Emission)
EN55103-2 (Immunity)
FCC rules part 15, class A (Emission)
To keep the cabinet in its original condition,
periodically clean it with a soft cloth. Stubborn
stains may be removed with a cloth lightly
dampened with a mild detergent solution. Never use
organic solvents such as thinners or abrasive
cleaners since these will damage the cabinet.
This device complies with part 15 of the FCC rules.
Operation is subject to the following conditions: (1)
This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Repacking
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial or light
industrial environment. The equipment generates,
uses, and can radiate radio frequency energy and if
not installed and used in accordance with the user
manual it may cause harmful interference to radio
communications.
Save the original shipping cardboard box and
packing material; they will become handy if you
ever have to ship the unit. For maximum protection,
re-pack the unit as originally packed from the
factory.
Warranty
You are cautioned that any changes or
modifications not expressly approved in this manual
could void your authority to operate this equipment.
The individual units in the DCS 6000 system are
minimum covered by 12 months warranty against
defects in materials or workmanship.
Installation precautions
Do not install the unit in a location near heat
sources such as radiators or air ducts, or in a place
Manual 01 18 04442
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Danish Interpretation Systems
User Manual
Description of the DCS 6000 system
RS232/RS422 connection on CU 6005/6010 for
external operation of the system of a PC or
control system such as AMX or Crestron
Features
The DCS 6000 system has the following main
features:
The SW 6000 is an optional software package,
which expands the functionality of the DCS 6000
system. The software runs on standard computer
technology (Standard PC with Windows 2000 or
XP).
•
•
•
Fully digital
Excellent sound quality
“State of the Art” fully digital integrated
interpretation, discussion and voting system
offering interpretation, language distribution,
conference microphone and voting facilities
with attendance check with Chip Card ™.
Main features of the SW 6000 are:
•
•
•
•
•
•
•
Microphone management
Mimic panel operation
Interpretation management
Voting management
Message handling
•
•
New, unique digital DATA and AUDIO bus.
39 incoming channels (8 floor channels + 31
interpreted channels) and one Line input.
•
•
34 distributed channels (3 x floor + 31
interpreted channels)
Agenda handling
Data stored on SQL data base for easy
export/import of data
The Delegate and Interpreter units are powered
and controlled by the CU 6005 Central Unit,
which drives up to app. 50 units on 2 chains or
by the CU 6010 Central Unit, which drives up
to app. 200 units on 4 chains.
•
Web interface available for easy links to
external databases
•
•
Multi language user interfaces
•
•
•
EX 6010 Extension Units or PS 6000 Power
Supplies available if more units are required
Supports different User types with different
priorities, user interfaces and control
possibilities
A total of 4000 units (delegate and interpreter
units) can be connected to the system.
•
Variety of printing facilities such as speaker’s
log, voting results, delegates list etc.
Using screened CAT5 or CAT5e cabling (FTP
or STP) ensuring a very cost effective
installation and easy set-up of portable systems
•
Firmware in Delegate units, Interpreter Units,
Central Units etc. upgradeable through serial
PC-connection (RS232 or RS422)
•
•
Can be operated with or without a PC.
Added functionality and comprehensive
features provided by SW 6000 software
package running on PC
Manual 01 18 04442
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Danish Interpretation Systems
User Manual
Conference equipment and channel
selectors
System components
The CU 6005/6010 Central Units support all
available units in the DCS 6000 series:
CS 6032FV/H
DM 6010P
Channel Selector (flush mounted)
Conference Unit (portable)
DM 6060P
Conference Unit (portable) with
one built-in channel selector
Central equipment etc.
CM/DM 6070P Conference Unit (portable) with
two built-in channel selectors
CM/DM 6090P Conference Unit (portable) with
two built-in channel selectors and
EX 6010
PS 6000
AO 6004
AO 6008
RP 6004
JB 6002
JB 6004
Extension Unit
Power Supply
Audio Output box
Audio Output box
Repeater for four chains
Junction Box with 2 outputs
Junction Box with 4 outputs
XLR microphone connector
CM/DM 6060F Conference Unit (flush mounted)
with one built-in channel
selectors
CM/DM 6510F Conference Unit (flush mounted)
with Chip-card and 3 voting
buttons
CM/DM 6560F Conference Unit (flush mounted)
with one built-in channel
selector, Chip-card and 3 voting
buttons
Interpreter equipment
IS 6132P
LS 6132P
Interpreter Set
Interpreter Loudspeaker
Voting equipment
MU 6040C/D
Microphone Unit for use with
customised front plate with
Loudspeaker, Microphone and
Buttons. Available in Delegate
(D) and Chairman (C) version
DV 6501F Voting Unit
MU 6042D
AM 6040
Dual Microphone Unit for use
with FD/FC front plate with
Loudspeaker, Microphone and
two delegate Buttons
Ambient Noise Microphone
Manual 01 18 04442
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Danish Interpretation Systems
User Manual
Operating instructions
•
•
A number of AO 6004 can be combined to
decode more channels. Up to 20 pieces AO
6004 can be connected and configured in one
system to decode more channels.
AO 6004 Audio Output Unit
General description
Easy to use with preconfigured settings and
automatic channel assignment at start-up:
The AO 6004 Audio Output Unit for the DCS 6000
system enables the user to record the sound from a
number of interpreted language channels or floor
channel on external devices such as tape- or hard
disk recorders by analogue interface.
Output A – channel 0
Output B – channel 1
Output C – channel 2
Output D – channel 3
It can also be used to distribute sound channels to
for example infrared distribution or loudspeaker
system.
•
•
User control of the AO 6004 by sending
commands from a PC via CU 6005/6010.
Features
The unit is connected to the bus as any other
unit and by controlling it from the CU
6005/6010 it can be placed anywhere in the
system.
•
•
Decoding of 4 language channels into analogue
audio chosen out of the possible 31 digital
channels as well as the Floor channel in 3
qualities.
•
The unit can be used as a single unit, installed
in a 19’’ rack or inserted in a slot in the CU
6005.
The 4 decoded channels are available on 4
analogue outputs (XLR connectors).
Manual 01 18 04442
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Danish Interpretation Systems
User Manual
User controls, indications & connections
Front plate layout
The front plate layout of the AO 6004 Audio Output Unit consists of 4 XLR analogue transformer balanced
outputs and 2 DCS-LAN connectors:
Front plate controls and indicators
System settings
The AO 6004 is an easy to use AO unit with pre-
configured settings and no user interface in terms of
controls, display or indicators.
Pre-configured settings
The AO 6004 comes with pre-configured settings
and can be used without additional configurations.
Front plate connectors
The AO 6004 automatically assigns channels to the
outputs at start-up. Output A is assigned channel 0
(Floor), Output B is assigned channel 1, Output C is
assigned channel 2 and Output D is assigned
channel 3.
ꢀ
Audio Output A to D
On the front are located 4 XLR 3P connectors, each
supplying transformer balanced audio signal from
each of the 4 channels.
The outputs can be used for tape recording purpose
i.e. or for connecting a digital infrared transmitter
like DT 6008, DT 6032 or analogue infrared
transmitter IT6108 for wireless transmission of the
interpreted languages.
The output volume for each channel is +3 dB,
which is the recommended level for connecting to
DT 60xx.
The unit can be re-configured using SW 6000. The
settings for a reconfigured unit can be saved in the
CU 6005/6010.
ꢀ
DCS-LAN connector
Two RJ45 sockets are located at the front of the unit
for connecting to the previous unit like the CU
6005/6010 Central Unit or any other unit with a
DCS LAN connector and to the next unit like an IS
6132 Interpreter set, CS 6032 Channel Selector,
DM/CM 6xxx Conference Unit.
SW6000 settings
The SW6000 can be used for changing the
assignment of channels to outputs and for setting
the volume.
Both the Conference Administration Application
(CAA) and the Conference User Application (CUA)
can be used to configure the AO units connected.
They both have settings for assigning channels to
each of the 4 outputs A-D. Each output can be set to
Manual 01 18 04442
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Danish Interpretation Systems
User Manual
one of the 31 language channels or one of the three
Floor channels:
Normal operation
Powering up
Connect the AO unit(s) to the rest of the system via
the DCS-LAN connectors and connect the audio
outputs to the appropriate units (tape recorders,
infrared transmitters, etc.).
Floor: automatic gain controlled output
Floor 1: loudspeaker unregulated audio
Floor 2: loudspeaker regulated audio
An ambience microphone will only be active on the
Floor channel, not on Floor 1 or Floor 2
Switch on the power on the CU 6005/6010.
During the initialization the AO unit will
automatically assign channels to the outputs. The
unit is immediately ready to use after start-up unless
other channels need to be assigned to the outputs or
the channel volume needs to be adjusted. These
adjustments can only be done using the SW 6000.
Values: {Floor 2, Floor 1, Floor, 1,…, 30, 31}
The volume of the outputs can also be set if the
default settings are not appropriate.
Values: {Off, -40, -39,…, 14, 15}
Refer to the CAA and CUA User Manuals for more
details.
Manual 01 18 04442
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Danish Interpretation Systems
User Manual
System Setup
General guidelines
Connect the AO 6004 to the various units using Cat
5 FTP or STP cables. Please observe the following
guide lines:
•
Maximum cable length in one chain when
using repeaters is 650 m.
If the last unit in one chain is a CS 6032 Channel
Selector, this unit has to be terminated with an
external termination, as the CS 6032 does not have
an internal termination.
•
Maximum cable length in one chain is 200
without repeater. This includes
m
interconnection cables between the units.
The max. usable cable length depends on
the units connected and length of feeding
cables etc.
Manual 01 18 04442
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Danish Interpretation Systems
User Manual
Typical schematics
Connect the AO 6004 to the DCS 6000 network
using Cat 5 cables. The Analogue Audio output
connectors are connected to either tape recorders
for recording the interpreted channels or to IT6008
Infrared Transmitter(s) for transmitting the
interpreted channels wireless.
Using AO 6004 with IT 6108 IR-Transmitter
When using the AO 6004 with the IT 6108 Infrared
Transmitter, the audio output level on the AO 6004
has to be set to match the sensitivity on the
transmitter.
The correct level to be set on each connected
channel on the AO 6004 is –12db.
Using AO 6004 with DT 60xx Digital IR-Transmitter
When using the AO 6004 with the DT 60xx
Infrared Transmitter, the audio output level on the
AO 6004 has to be set to match the sensitivity on
the transmitter.
can as earlier mentioned be changed using SW
6000. Please refer to the section ‘Pre-configured
settings’ on page 8. The DT 60XX input level
settings should be set to –6dB.
The correct level on each connected channel on the
AO 6004 is +3dB. This level is factory preset, but
Manual 01 18 04442
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Danish Interpretation Systems
User Manual
Appendix
Technical appendix
Cabling
CAT5
The phase of the pairs must be correct and the
wiring spec. as stated in CAT5 (EIA 568-B) have to
be followed.
The DCS 6000 system uses CAT5, CAT5e or
CAT6 FTP or STP cables with screened RJ45
connectors.
Note: CAT6 cables can normally only be
terminated in sockets (female) and not in cable
plugs. CAT6 should thus only be used for long
cable draws terminating in wall outlets or patch
panels.
EIA 568-B wiring shall be used.
It is important to use only FTP or STP
(screened) cables and screened RJ45 connectors
and not UTP cable, which is unscreened.
Analogue out (XLR3 male)
Pin
Signal
Cable type
How to wire a CAT5 (EIA 568-B) Cable:
1
2
3
Ground
In phase signal
Out phase signal
DIS type #2914
or 2 x 0,25 mm
shielded.
2
Pin Function
Connector #1 Connector #2
1
2
3
4
5
6
7
8
In-going + ORG/WHT
ORG/WHT
ORG
GRN/WHT
BLU
BLU/WHT
GRN
In-going -
+48V
0V
ORG
GRN/WHT
BLU
Accessories (not supplied)
EC 6000-..5 Connection Cable 0.5 m......................10 03 12500
EC 6000-01 Connection Cable 1 m.........................10 03 13101
EC 6000-02 Connection Cable 2 m.........................10 03 13201
EC 6000-05 Connection Cable 5 m.........................10 03 13501
EC 6000-10 Connection Cable 10 m.......................10 03 14102
EC 6000-20 Connection Cable 20 m.......................10 03 14202
EC 6000-50 Connection Cable 50 m.......................10 03 14502
0V
+48V
BLU/WHT
GRN
Outgoing - BRN/WHT
Outgoing + BRN
BRN/WHT
BRN
Note. If other colour codes are used then the four
pairs are connected as follows:
Pair 1: Pin 1 & 2
Pair 2: Pin 3 & 6
Pair 3: Pin 4 & 5
Pair 4: Pin 7 & 8
Manual 01 18 04442
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Danish Interpretation Systems
User Manual
Technical specifications
Digital Section
Remote Control commands in/out
Sound quality .........20 bit audio @ 32 kHz sampling frequency
By using SW 6000 the user can control the AO 6004 through
the CU 6005/6010.
Analogue Section
Output signal type...............ground lifting transformer balanced
The CU 6005/6010 can read/control the following settings:
* ................................. Channel number for each output channel
* .............................................. Volume setting for each channel
The settings can only be read/controlled from the SW 6000.
Nominal output level: ...........................0 dBm at nominal input
Max. Output level:..........................................................15 dBm
Frequency response .................................................... 50-15kHz
Signal to noise ratio: .................................................. >85 dBA
Total harmonic distortion: .............................................< 0.1%
The CU 6005/6010 continuously monitors the status of the AO
6004 to ensure that updated status of the unit is always present
on the CU 6005/6010.
General
Power requirement...................................................24-48 V DC
Power consumption ............................................. 2W maximum
Power supplied from
Specifications are subject to change without notice.
...................................CU 6005 / CU 6010 / EX 6010 / PS 6000
Temperature to guarantee specified performance
..............................5 Deg C. to 40 Deg C. (35 to 80% humidity)
Storage temperature
.......................... -20 Deg C. to 60 Deg C. (10 to 80% humidity)
Weight............................................................................ 0.84 kg
Dimensions (W x H x D).......... 180 (205) x 38 x 120 (120) mm
Dimensions in bracket are including brackets
Accessories supplied ..............................................User manual
Connectors
DCS-LAN network............................................... 2 pieces RJ45
Analogue outputs connectors ........... 4 - XLR3 male connectors
Manual 01 18 04442
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Danish Interpretation Systems
User Manual
Manual 01 18 04442
14
Download from Www.Somanuals.com. All Manuals Search And Download.
|