Install the USB VPN & Firewall
Adapter
Windows XP
Windows 2000
A. If you haven’t already, start your
computer.
A. If you haven’t already, start your
computer.
A. Before you begin, make sure that all of your hardware is powered off, including the
Adapter, PCs, cable or DSL modem, and/or Router.
B. Windows XP will automatically
detect the Adapter connected to your
computer and display the Welcome
to the Found New Hardware Wizard
screen. Select Install the software
automatically (Recommended),
and insert the Setup CD into the CD-
ROM drive. Then click the Next but-
ton.
B. Windows 2000 will automatically
detect the Adapter connected to your
PC. When the Welcome to the Found
New Hardware Wizard screen
appears, insert the Setup CD into
your CD-ROM drive, and click the
Next button.
This Quick Installation is meant to help you install the product quickly and easily. For detailed instructions
on installation and configuration, and further setup options, please consult the User Guide.
B. Connect one end of the USB cable to the USB port on the Adapter and the other
end of the USB cable to a USB port on your PC.
Instant Etherfast® Series
C. Connect one end of an Ethernet cable to the Ethernet port on the Adapter, and the
other end to an Ethernet port (LAN port) on a Router. If you are not using a Router,
you can connect it directly to a cable or DSL modem.
USB VPN &
USBVPN1
B
C
D
Firewall Adapter
B
D
F
D. Turn on the PC, cable or DSL modem and/or Router.
C. Select Search for a suitable driver
for my device (recommended).
Click the Next button.
•
•
The USB LED will light up green as soon as the Adapter is connected correctly to
the PC.
C. Windows may inform you that it is
searching for the driver.
D. When the Locate Driver Files screen
appears, select CD-ROM drives and
Windows will find the driver on the
CD. Click the Next button to contin-
ue.
The Diag LED will light up red for a few seconds when the Adapter goes through
D. Then, it will notify you that the driv-
er has not passed Windows Logo
testing. This is normal, and it has
been verified that the Adapter does
work with Windows XP. Click the
Continue Anyway button.
its self-diagnostic test. This LED will turn off when the self-test is complete.
The Adapter’s hardware installation is now complete.
E. The Driver Files Search Results
screen will appear when Windows
has found the driver. Click the Next
button to continue.
E. Windows may inform you that it is
installing the software.
Install the Driver for the
USB VPN & Firewall Adapter
F. The Completing the Found New
Hardware Wizard screen will appear.
Click the Finish button. Then
remove the Setup CD from the CD-
ROM drive.
F. You may be informed that a digital
signature has not been found. This is
normal, and it has been verified that
the Adapter does work with Windows
2000. Click the Yes button to contin-
ue.
The next step is to install the driver for the USB VPN & Firewall Adapter. The instruc-
tions vary for each operating system, so proceed to the operating system that is used
on your PC.
Package Contents
USB VPN & Firewall Adapter (1)
6 ft Cat5e Ethernet Cable (2)
Setup CD-ROM with User Guide (3)
Quick Installation guide
2
•
•
•
•
•
Congratulations! The installation of
the USB VPN and Firewall Adapter’s
driver is complete.
Registration Card
3
1
Continued on Back
For more information about networking under Windows XP, refer to your
W W W . L I N K S Y S . C O M
Download from Www.Somanuals.com. All Manuals Search And Download.
|