Linksys Business Series Network Attached Storage
Models NSS4000 and NSS6000
Download from Www.Somanuals.com. All Manuals Search And Download.
Linksys NSS4000/NSS6000
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Install Disk Drives
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Remove Drive Trays
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Install Drive in Drive Trays
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert Drive Trays
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Install: Rack
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Install: Desktop (optional)
7
AUX
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
8
AUX
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect Devices
9
Linksys One Services Router
LAN
Ethernet cable
(included)
APC Smart UPS
(optional, not included)
RPS
(optional, not included)
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect to Power
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance and Safety Information
The Linksys Business Series models NSS4000 and NSS6000 meet the following regulatory compliance and safety
standards:
Specification
Description
Products with the CE Marking indicate compliance with the 89/336/EEC and 73/23/EEC
directives, which include the safety and EMC standards listed below.
Regulatory Compliance
UL 60950-1
IEC60950-1 CB /PSB
CSA C22.2 No.60950-1-03
EN 60950-1
Safety
EMC
FCC Part 15 (CFR 47) Class A
ICES-003 Class A
EN 55022 Class A
CISPR22 Class A
EN 55024
EN 61000-3-2
EN 61000-3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Part 15 Class A Compliance
This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was
probably caused by the Linksys equipment or one of its peripheral devices. If the equipment causes interference to
radio or television reception, try to correct the interference by using one or more of the following measures:
•
•
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Move the equipment to one side or the other of the television or radio.
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Modifications to this product not authorized by Linksys could void the FCC approval and negate your
authority to operate this product.
Warning
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
Industry Canada Statement
This device complies with Canadian ICES-003 rule.
Cet appareil est conforme a la norme NMB-003 d'Industry Canada.
EC Declaration of Conformity (Europe)
In compliance with the EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC, and Amendment Directive
93/68/EEC, this product meets the requirements of the following standards:
•
•
EN55022 Emission
EN55024 Immunity
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
The following statements are warnings or safety guidelines. A warning means danger. You are in a situation that
could cause bodily injury. Before working on equipment, be aware of the hazards involved with electrical circuitry
and standard safety practices to prevent accidents.
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on
any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
Warning
practices for preventing accidents. Use the statement number provided at the end of each warning to locate its
translation in the translated safety warnings that accompanied this device.
SAVE THESE INSTRUCTIONS
Work During Lightning Activity
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
Installation Instructions
Read the installation instructions before connecting the system to the power source.
Warning
Download from Www.Somanuals.com. All Manuals Search And Download.
SELV Circuit
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage
(TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN
ports both use RJ-45 connectors. Use caution when connecting cables.
Warning
Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Warning
Warning
Comply with Local National Electrical Codes
Installation of the equipment must comply with local and national electrical codes.
Product Disposal
Ultimate disposal of this product should be handled according to all national laws and regulations.
Download from Www.Somanuals.com. All Manuals Search And Download.
Environmental Specifications
Dimensions
17.31” x 16.62” x 1.75” (439 mm x 422 mm x 44.45 mm)
21 lbs (9.52 kg) (with drives installed)
Unit Weight
Power
150 Watt, 12V, AC Power Adapter
Certification
Security
CE Class A, FCC Class A, UL, CUL
On disk data encrpytion with encrpytion key
32º to 113ºF (0 to 40º C)
-4º to 158ºF (-20 to 70º C)
10 to 90 % RH
Operating Temp
Storage Temp
Operating Humidity
Storage Humidity
10 to 95% RH
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Supply Safety Warnings
When using the Linksys Business Series models NSS4000 and NSS6000, observe the following power supply
safety warnings:
TN Power
The device is designed to work with TN power systems.
Warning
Ground Conductor Warning
Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground
conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that
Warning
suitable grounding is available.
Power Supply Installation Warning
The power supply must be placed indoors.
Warning
Download from Www.Somanuals.com. All Manuals Search And Download.
Circuit Breaker
This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the
protective device is rated not greater than: 120 VAC, 15A U.S. (240 VAC, 10A international)
Warning
Warning
Main Disconnecting Device
The plug-socket combination must be accessible at all times, because it serves as the main disconnecting
device.
Caution
Only use the Linksys-specified power supply. Refer to the installation manual provided with this
product.
Download from Www.Somanuals.com. All Manuals Search And Download.
Linksys Software License Agreement v.2.14.05
THIS LICENSE AGREEMENT IS BETWEEN YOU AND CISCO-LINKSYS LLC ("Linksys"). BY DOWNLOADING OR INSTALLING THE
SOFTWARE, OR USING THE PRODUCT CONTAINING THE SOFTWARE, YOU ARE CONSENTING TO BE BOUND BY THIS
AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THESE TERMS, THEN YOU MAY NOT DOWNLOAD, INSTALL OR USE THE
SOFTWARE. YOU MAY RETURN UNUSED SOFTWARE (OR, IF THE SOFTWARE IS SUPPLIED AS PART OF ANOTHER PRODUCT,
THE UNUSED PRODUCT) FOR A FULL REFUND UP TO 30 DAYS AFTER ORIGINAL PURCHASE, SUBJECT TO THE RETURN
PROCESS AND POLICIES OF THE PARTY FROM WHICH YOU PURCHASED SUCH PRODUCT OR SOFTWARE.
License. Subject to the terms and conditions of this Agreement, Linksys grants the original end user purchaser of the Linksys product
containing the Software ("You") a nonexclusive license to use the Software solely as embedded in or (where authorized in the applicable
documentation) for communication with such product. This license may not be sublicensed, and is not transferable except to a person or
entity to whom you transfer ownership of the complete Linksys product containing the Software, provided you permanently transfer all rights
under this Agreement and do not retain any full or partial copies of the Software, and the recipient agrees to the terms of this Agreement.
"Software" includes, and this Agreement will apply to (a) the Linksys software provided in or with the applicable Linksys product, and (b) any
upgrades, updates, bug fixes or modified versions ("Upgrades") or backup copies of the Software supplied to You by Linksys or an
authorized reseller, provided you already hold a valid license to the original software and have paid any applicable fee for the Upgrade.
Protection of Information. The Software and documentation contain trade secrets and/or copyrighted materials of Linksys or its suppliers.
You will not decompile, decrypt, reverse engineer or disassemble the Software (except to the extent expressly permitted by law
notwithstanding this provision), and will not disclose or make available such trade secrets or copyrighted material in any form to any third
party. Title to Software and documentation will remain solely with Linksys.
Open Source Software. The GPL source code incorporated into the Software is available for free download at http://www.linksys.com/gpl.
If You would like a copy of the GPL source code in this Software on a CD, Linksys will mail to You a CD with such code for $9.99 plus the cost
of shipping upon request.
Term and Termination. You may terminate this License at any time by destroying all copies of the Software and documentation. Your rights
under this License will terminate immediately without notice from Linksys if You fail to comply with any provision of this Agreement.
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
Linksys warrants to the original end user purchaser of the Linksys Product (“You”) that for a period of two (2) years for the Linksys Product’s
Hardware and for a period of one (1) year for the Linksys Product’s disk drives (if included), fan and power supply (the “Warranty Period”), your
Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys' entire
liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates. This
limited warranty extends only to the original purchaser.
If the Product proves defective during the Warranty Period call Linksys Technical Support in order to obtain a Return Authorization Number, if
applicable. BE SURE TO HAVE YOUR PROOF OF PURCHASE ON HAND WHEN CALLING. If You are requested to return the Product, mark the
Return Authorization Number clearly on the outside of the package and include a copy of your original proof of purchase.
RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. You are responsible for shipping defective Products to Linksys.
Linksys pays for UPS Ground shipping from Linksys back to You only. Customers located outside of the United States of America and Canada are
responsible for all shipping and handling charges.
ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE
DURATION OF THE WARRANTY PERIOD. ALL OTHER EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED. Some jurisdictions do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to You. This warranty gives You specific legal rights, and You may also have other rights which
vary by jurisdiction. This warranty does not apply if the Product (a) has been altered, except by Linksys, (b) has not been installed, operated,
repaired, or maintained in accordance with instructions supplied by Linksys, or (c) has been subjected to abnormal physical or electrical stress,
misuse, negligence, or accident. In addition, due to the continual development of new techniques for intruding upon and attacking networks, Linksys
does not warrant that the Product will be free of vulnerability to intrusion or attack.
THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE OR PROFIT, OR FOR SPECIAL,
INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEGLIGENCE),
ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT (INCLUDING ANY SOFTWARE) EVEN IF LINKSYS HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL LINKSYS’ LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR
THE PRODUCT.
The foregoing limitations will apply even if any warranty or remedy provided under this Agreement fails of its essential purpose. Some jurisdictions
do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to You.
Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine, CA 92623.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
WWWꢀLINKSYSꢀCOM
©2007 Cisco Systems, Inc. All rights reserved. Linksys is a registered trademark and the Linksys One logo is a trademark of Cisco Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|