1. PRODUCT DESCRIPTION
2. KIT PARTS
Linear’s carriage house door rail conversion kit is a garage door
operator rail accessory that converts standard rails for installations
with heavier carriage house style garage doors. The rolled-steel
conversion rail bolts to the top of the standard rail to form a strong
“I-beam” rail assembly.
CHCR
PARTS INCLUDED
FOUR 1/4-20 KEPS NUTS
Carriage House Door
Rail Conversion Kit
The rail conversion kit is designed for installation on Linear’s
belt-drive and chain-drive rails. The rail models compatible with the
rail conversion kit are:
FOUR 1/4-20 CARRIAGE BOLTS
Installation
Instructions
For Models:
CHCR-7/8
CHCR-8
8-FOOT & 10-FOOT
EXTRA 1/4-20
CARRIAGE BOLT
AND KEPS NUT
CONVERSION
RAIL
•
•
•
•
•
HBT7C 7-foot belt-drive rail
HBT8C 8-foot belt-drive rail
HCT7C 7-foot chain-drive rail
HCT8C 8-foot chain-drive rail
HCT10C 10-foot chain-drive rail
OPTIONAL MODEL CSB
SUPPORT BRACKET KIT
(NOT INCLUDED)
CHCR-10
ADDITIONAL
BRACKET
HARDWARE
(760) 438-7000
USA & Canada (800) 421-1587 & (800) 392-0123
Toll Free FAX (800) 468-1340
SUPPORT
BRACKET
3. RAIL ASSEMBLY
4. OPTIONAL RAIL SUPPORT BRACKET
LIMITED WARRANTY
This product is warranted to the original consumer against defects in material and
workmanship for five (5) years. Linear will repair, or at its option, replace, any device
that it finds requires service under this warranty, and will return the repaired or replaced
device to the consumer at Linear’s cost. Devices must be sent to Linear for service
at owner’s expense. This warranty does not apply to damage to the product from
negligence, abuse, abnormal usage, misuse, accidents, normal wear or tear or due
to failure to follow Seller’s instructions, or arising from improper installation, storage
or maintenance. In no event will Linear be responsible for incidental, compensatory,
punitive, consequential, indirect, special or other damages. The remedies provided by
this warranty are exclusive. Some states do not allow the exclusion or limitation of
incidental and consequential damages, so the above limitation or exclusion may not
apply to you. Any warranties implied by law are limited to the time periods set forth
above. Some states do not allow limitations on how long an implied warranty lasts, so
the above limitation may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
ATTACH SUPPORT
BRACKET AT CENTER
OF CONVERSION RAIL
CHAIN / BELT NOT SHOWN
PLACE THE CONVERSION RAIL
ON THE FAR SIDE OF THE STOCK
RAIL AS SHOWN
CONNECT SUPPORT
BRACKET TO A
HANGER STRAP
NUTS ON
THIS SIDE
BE SURE ALL THE
SLOTTED HOLES
ALIGN IN BOTH RAILS
BOLTS ON
THIS SIDE
For warranty service and shipping instructions contact Linear at the phone number
shown below. In order to be protected by this warranty, save your proof of purchase
and send a copy with equipment should repair be required. All products returned for
warranty service require a Return Product Authorization Number (RPA#). Contact
Linear Technical Services at 1-800-421-1587 for an RPA# and other important details.
ATTACH CONVERSION RAIL
TO STOCK RAIL WITH
CARRIAGE BOLTS AND
LOCKING NUTS SUPPLIED
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright © 2007 Linear LLC
227800 A
|